--- _id: '23505' author: - first_name: Iris full_name: Gräßler, Iris id: '47565' last_name: Gräßler orcid: 0000-0001-5765-971X - first_name: Daniel full_name: Preuß, Daniel id: '40253' last_name: Preuß - first_name: Christian full_name: Oleff, Christian id: '41188' last_name: Oleff citation: ama: 'Gräßler I, Preuß D, Oleff C. Automatisierte Identifikation und Charakterisierung von Anforderungsabhängigkeiten – Literaturstudie zum Vergleich von Lösungsansätzen. In: Krause D, Paetzold K, Wartzack S, Design Society, eds. Proceedings of the 31st Symposium Design for X (DFX2020); 16. - 18. Sep. 2020. ; 2020:199-208. doi:10.35199/dfx2020.21' apa: Gräßler, I., Preuß, D., & Oleff, C. (2020). Automatisierte Identifikation und Charakterisierung von Anforderungsabhängigkeiten – Literaturstudie zum Vergleich von Lösungsansätzen. In D. Krause, K. Paetzold, S. Wartzack, & Design Society (Eds.), Proceedings of the 31st Symposium Design for X (DFX2020); 16. - 18. Sep. 2020 (pp. 199–208). https://doi.org/10.35199/dfx2020.21 bibtex: '@inproceedings{Gräßler_Preuß_Oleff_2020, title={Automatisierte Identifikation und Charakterisierung von Anforderungsabhängigkeiten – Literaturstudie zum Vergleich von Lösungsansätzen}, DOI={10.35199/dfx2020.21}, booktitle={Proceedings of the 31st Symposium Design for X (DFX2020); 16. - 18. Sep. 2020}, author={Gräßler, Iris and Preuß, Daniel and Oleff, Christian}, editor={Krause, Dieter and Paetzold, Kristin and Wartzack, Sandro and Design SocietyEditors}, year={2020}, pages={199–208} }' chicago: Gräßler, Iris, Daniel Preuß, and Christian Oleff. “Automatisierte Identifikation und Charakterisierung von Anforderungsabhängigkeiten – Literaturstudie zum Vergleich von Lösungsansätzen.” In Proceedings of the 31st Symposium Design for X (DFX2020); 16. - 18. Sep. 2020, edited by Dieter Krause, Kristin Paetzold, Sandro Wartzack, and Design Society, 199–208, 2020. https://doi.org/10.35199/dfx2020.21. ieee: I. Gräßler, D. Preuß, and C. Oleff, “Automatisierte Identifikation und Charakterisierung von Anforderungsabhängigkeiten – Literaturstudie zum Vergleich von Lösungsansätzen,” in Proceedings of the 31st Symposium Design for X (DFX2020); 16. - 18. Sep. 2020, 2020, pp. 199–208. mla: Gräßler, Iris, et al. “Automatisierte Identifikation und Charakterisierung von Anforderungsabhängigkeiten – Literaturstudie zum Vergleich von Lösungsansätzen.” Proceedings of the 31st Symposium Design for X (DFX2020); 16. - 18. Sep. 2020, edited by Dieter Krause et al., 2020, pp. 199–208, doi:10.35199/dfx2020.21. short: 'I. Gräßler, D. Preuß, C. Oleff, in: D. Krause, K. Paetzold, S. Wartzack, Design Society (Eds.), Proceedings of the 31st Symposium Design for X (DFX2020); 16. - 18. Sep. 2020, 2020, pp. 199–208.' corporate_editor: - Design Society date_created: 2021-08-24T09:28:11Z date_updated: 2022-01-06T06:55:56Z department: - _id: '152' doi: 10.35199/dfx2020.21 editor: - first_name: Dieter full_name: Krause, Dieter last_name: Krause - first_name: Kristin full_name: Paetzold, Kristin last_name: Paetzold - first_name: Sandro full_name: Wartzack, Sandro last_name: Wartzack language: - iso: ger page: 199-208 publication: Proceedings of the 31st Symposium Design for X (DFX2020); 16. - 18. Sep. 2020 publication_status: published status: public title: Automatisierte Identifikation und Charakterisierung von Anforderungsabhängigkeiten – Literaturstudie zum Vergleich von Lösungsansätzen type: conference user_id: '21240' year: '2020' ... --- _id: '23515' author: - first_name: Iris full_name: Gräßler, Iris id: '47565' last_name: Gräßler orcid: 0000-0001-5765-971X - first_name: Kurt D. full_name: Bettenhausen, Kurt D. last_name: Bettenhausen - first_name: Attila M. full_name: Bilgic, Attila M. last_name: Bilgic - first_name: Dagmar full_name: Dirzus, Dagmar last_name: Dirzus citation: ama: Gräßler I, Bettenhausen KD, Bilgic AM, Dirzus D. Which future do we want? It’s up to us! - 4 future scenarios for automation 2030. at-Automatisierungstechnik 68(6). 2020;(68 (6)):500-507. apa: Gräßler, I., Bettenhausen, K. D., Bilgic, A. M., & Dirzus, D. (2020). Which future do we want? It’s up to us! - 4 future scenarios for automation 2030. At-Automatisierungstechnik 68(6), 68 (6), 500–507. bibtex: '@article{Gräßler_Bettenhausen_Bilgic_Dirzus_2020, title={Which future do we want? It’s up to us! - 4 future scenarios for automation 2030}, number={68 (6)}, journal={at-Automatisierungstechnik 68(6)}, author={Gräßler, Iris and Bettenhausen, Kurt D. and Bilgic, Attila M. and Dirzus, Dagmar}, year={2020}, pages={500–507} }' chicago: 'Gräßler, Iris, Kurt D. Bettenhausen, Attila M. Bilgic, and Dagmar Dirzus. “Which Future Do We Want? It’s up to Us! - 4 Future Scenarios for Automation 2030.” At-Automatisierungstechnik 68(6), no. 68 (6) (2020): 500–507.' ieee: I. Gräßler, K. D. Bettenhausen, A. M. Bilgic, and D. Dirzus, “Which future do we want? It’s up to us! - 4 future scenarios for automation 2030,” at-Automatisierungstechnik 68(6), no. 68 (6), pp. 500–507, 2020. mla: Gräßler, Iris, et al. “Which Future Do We Want? It’s up to Us! - 4 Future Scenarios for Automation 2030.” At-Automatisierungstechnik 68(6), no. 68 (6), 2020, pp. 500–07. short: I. Gräßler, K.D. Bettenhausen, A.M. Bilgic, D. Dirzus, At-Automatisierungstechnik 68(6) (2020) 500–507. date_created: 2021-08-24T09:54:30Z date_updated: 2022-01-06T06:55:56Z department: - _id: '152' issue: 68 (6) language: - iso: eng main_file_link: - url: https://doi.org/10.1515/auto-2020-0057 page: 500-507 publication: at-Automatisierungstechnik 68(6) status: public title: Which future do we want? It's up to us! - 4 future scenarios for automation 2030 type: journal_article user_id: '77594' year: '2020' ... --- _id: '23517' author: - first_name: Iris full_name: Gräßler, Iris id: '47565' last_name: Gräßler orcid: 0000-0001-5765-971X - first_name: Julian full_name: Hentze, Julian id: '13342' last_name: Hentze citation: ama: Gräßler I, Hentze J. The new V-Model of 2206 and its validation. at-Automatisierungstechnik 68(5). 2020;(68(5)):312-324. apa: Gräßler, I., & Hentze, J. (2020). The new V-Model of 2206 and its validation. At-Automatisierungstechnik 68(5), 68(5), 312–324. bibtex: '@article{Gräßler_Hentze_2020, title={The new V-Model of 2206 and its validation}, number={68(5)}, journal={at-Automatisierungstechnik 68(5)}, author={Gräßler, Iris and Hentze, Julian}, year={2020}, pages={312–324} }' chicago: 'Gräßler, Iris, and Julian Hentze. “The New V-Model of 2206 and Its Validation.” At-Automatisierungstechnik 68(5), no. 68(5) (2020): 312–24.' ieee: I. Gräßler and J. Hentze, “The new V-Model of 2206 and its validation,” at-Automatisierungstechnik 68(5), no. 68(5), pp. 312–324, 2020. mla: Gräßler, Iris, and Julian Hentze. “The New V-Model of 2206 and Its Validation.” At-Automatisierungstechnik 68(5), no. 68(5), 2020, pp. 312–24. short: I. Gräßler, J. Hentze, At-Automatisierungstechnik 68(5) (2020) 312–324. date_created: 2021-08-24T10:04:24Z date_updated: 2022-01-06T06:55:56Z department: - _id: '152' issue: 68(5) language: - iso: eng main_file_link: - url: https://doi.org/10.1515/auto-2020-0015 page: 312-324 publication: at-Automatisierungstechnik 68(5) publication_identifier: issn: - 'ISSN: 2196-677X' status: public title: The new V-Model of 2206 and its validation type: journal_article user_id: '77594' year: '2020' ... --- _id: '23522' author: - first_name: Iris full_name: Gräßler, Iris id: '47565' last_name: Gräßler orcid: 0000-0001-5765-971X - first_name: Philipp full_name: Scholle, Philipp last_name: Scholle - first_name: Henrik full_name: Thiele, Henrik id: '33419' last_name: Thiele citation: ama: 'Gräßler I, Scholle P, Thiele H. Scenario Technique. In: Sandor V, ed. Integrated Design Engineering. Interdisciplinary and Holistic Product Development. Kapitel 20. Springer International Publishing Switzerland; 2020:507-529. doi:10.1007/978-3-030-19357-7' apa: Gräßler, I., Scholle, P., & Thiele, H. (2020). Scenario Technique. In V. Sandor (Ed.), Integrated Design Engineering. Interdisciplinary and Holistic Product Development (pp. 507–529). Springer International Publishing Switzerland. https://doi.org/10.1007/978-3-030-19357-7 bibtex: '@inbook{Gräßler_Scholle_Thiele_2020, series={Kapitel 20}, title={Scenario Technique}, DOI={10.1007/978-3-030-19357-7}, booktitle={Integrated Design Engineering. Interdisciplinary and Holistic Product Development}, publisher={Springer International Publishing Switzerland}, author={Gräßler, Iris and Scholle, Philipp and Thiele, Henrik}, editor={Sandor, VajnaEditor}, year={2020}, pages={507–529}, collection={Kapitel 20} }' chicago: Gräßler, Iris, Philipp Scholle, and Henrik Thiele. “Scenario Technique.” In Integrated Design Engineering. Interdisciplinary and Holistic Product Development, edited by Vajna Sandor, 507–29. Kapitel 20. Springer International Publishing Switzerland, 2020. https://doi.org/10.1007/978-3-030-19357-7. ieee: I. Gräßler, P. Scholle, and H. Thiele, “Scenario Technique,” in Integrated Design Engineering. Interdisciplinary and Holistic Product Development, V. Sandor, Ed. Springer International Publishing Switzerland, 2020, pp. 507–529. mla: Gräßler, Iris, et al. “Scenario Technique.” Integrated Design Engineering. Interdisciplinary and Holistic Product Development, edited by Vajna Sandor, Springer International Publishing Switzerland, 2020, pp. 507–29, doi:10.1007/978-3-030-19357-7. short: 'I. Gräßler, P. Scholle, H. Thiele, in: V. Sandor (Ed.), Integrated Design Engineering. Interdisciplinary and Holistic Product Development, Springer International Publishing Switzerland, 2020, pp. 507–529.' date_created: 2021-08-25T12:52:04Z date_updated: 2022-01-06T06:55:56Z department: - _id: '152' doi: 10.1007/978-3-030-19357-7 editor: - first_name: Vajna full_name: Sandor, Vajna last_name: Sandor language: - iso: eng page: 507-529 publication: Integrated Design Engineering. Interdisciplinary and Holistic Product Development publication_identifier: isbn: - 978-3-030-19356-0 publisher: Springer International Publishing Switzerland series_title: Kapitel 20 status: public title: Scenario Technique type: book_chapter user_id: '21240' year: '2020' ... --- _id: '23528' author: - first_name: Tilo full_name: Mentler, Tilo last_name: Mentler - first_name: Christian full_name: Reuter, Christian last_name: Reuter - first_name: Simon full_name: Nestler, Simon last_name: Nestler - first_name: Marc-Andre full_name: Kaufhold, Marc-Andre last_name: Kaufhold - first_name: Michael full_name: Herczeg, Michael last_name: Herczeg - first_name: Jens full_name: Pottebaum, Jens id: '405' last_name: Pottebaum orcid: http://orcid.org/0000-0001-8778-2989 citation: ama: 'Mentler T, Reuter C, Nestler S, Kaufhold M-A, Herczeg M, Pottebaum J. 7. Workshop Mensch-Maschine-Interaktion in sicherheitskritischen Systemen. In: Hansen C, Nürnberger A, Preim B, eds. Mensch und Computer 2020 - Workshopband. Bonn: Gesellschaft für Informatik e.V; 2020. doi:10.18420/muc2020-ws117' apa: 'Mentler, T., Reuter, C., Nestler, S., Kaufhold, M.-A., Herczeg, M., & Pottebaum, J. (2020). 7. Workshop Mensch-Maschine-Interaktion in sicherheitskritischen Systemen. In C. Hansen, A. Nürnberger, & B. Preim (Eds.), Mensch und Computer 2020 - Workshopband. Bonn: Gesellschaft für Informatik e.V. https://doi.org/10.18420/muc2020-ws117' bibtex: '@inproceedings{Mentler_Reuter_Nestler_Kaufhold_Herczeg_Pottebaum_2020, place={Bonn}, title={ 7. Workshop Mensch-Maschine-Interaktion in sicherheitskritischen Systemen}, DOI={10.18420/muc2020-ws117}, booktitle={Mensch und Computer 2020 - Workshopband}, publisher={Gesellschaft für Informatik e.V}, author={Mentler, Tilo and Reuter, Christian and Nestler, Simon and Kaufhold, Marc-Andre and Herczeg, Michael and Pottebaum, Jens}, editor={Hansen, C. and Nürnberger, A. and Preim, B.Editors}, year={2020} }' chicago: 'Mentler, Tilo, Christian Reuter, Simon Nestler, Marc-Andre Kaufhold, Michael Herczeg, and Jens Pottebaum. “ 7. Workshop Mensch-Maschine-Interaktion in sicherheitskritischen Systemen.” In Mensch und Computer 2020 - Workshopband, edited by C. Hansen, A. Nürnberger, and B. Preim. Bonn: Gesellschaft für Informatik e.V, 2020. https://doi.org/10.18420/muc2020-ws117.' ieee: T. Mentler, C. Reuter, S. Nestler, M.-A. Kaufhold, M. Herczeg, and J. Pottebaum, “ 7. Workshop Mensch-Maschine-Interaktion in sicherheitskritischen Systemen,” in Mensch und Computer 2020 - Workshopband, 2020. mla: Mentler, Tilo, et al. “ 7. Workshop Mensch-Maschine-Interaktion in sicherheitskritischen Systemen.” Mensch und Computer 2020 - Workshopband, edited by C. Hansen et al., Gesellschaft für Informatik e.V, 2020, doi:10.18420/muc2020-ws117. short: 'T. Mentler, C. Reuter, S. Nestler, M.-A. Kaufhold, M. Herczeg, J. Pottebaum, in: C. Hansen, A. Nürnberger, B. Preim (Eds.), Mensch und Computer 2020 - Workshopband, Gesellschaft für Informatik e.V, Bonn, 2020.' date_created: 2021-08-26T11:50:45Z date_updated: 2022-01-06T06:55:56Z department: - _id: '152' doi: 10.18420/muc2020-ws117 editor: - first_name: C. full_name: Hansen, C. last_name: Hansen - first_name: A. full_name: Nürnberger, A. last_name: Nürnberger - first_name: B. full_name: Preim, B. last_name: Preim language: - iso: ger place: Bonn publication: Mensch und Computer 2020 - Workshopband publisher: Gesellschaft für Informatik e.V status: public title: ' 7. Workshop Mensch-Maschine-Interaktion in sicherheitskritischen Systemen' type: conference user_id: '21240' year: '2020' ... --- _id: '23529' author: - first_name: Iris full_name: Gräßler, Iris id: '47565' last_name: Gräßler orcid: 0000-0001-5765-971X - first_name: Christian full_name: Oleff, Christian id: '41188' last_name: Oleff - first_name: Philipp full_name: Scholle, Philipp last_name: Scholle citation: ama: Gräßler I, Oleff C, Scholle P. Method for Systematic Assessment of Requirement Change Risk in Industrial Practice. Applied Sciences 23/2020 (23). 2020:8697. apa: Gräßler, I., Oleff, C., & Scholle, P. (2020). Method for Systematic Assessment of Requirement Change Risk in Industrial Practice. Applied Sciences 23/2020 (23), 8697. bibtex: '@article{Gräßler_Oleff_Scholle_2020, title={Method for Systematic Assessment of Requirement Change Risk in Industrial Practice}, journal={Applied Sciences 23/2020 (23)}, author={Gräßler, Iris and Oleff, Christian and Scholle, Philipp}, year={2020}, pages={8697} }' chicago: Gräßler, Iris, Christian Oleff, and Philipp Scholle. “Method for Systematic Assessment of Requirement Change Risk in Industrial Practice.” Applied Sciences 23/2020 (23), 2020, 8697. ieee: I. Gräßler, C. Oleff, and P. Scholle, “Method for Systematic Assessment of Requirement Change Risk in Industrial Practice,” Applied Sciences 23/2020 (23), p. 8697, 2020. mla: Gräßler, Iris, et al. “Method for Systematic Assessment of Requirement Change Risk in Industrial Practice.” Applied Sciences 23/2020 (23), 2020, p. 8697. short: I. Gräßler, C. Oleff, P. Scholle, Applied Sciences 23/2020 (23) (2020) 8697. date_created: 2021-08-26T11:55:14Z date_updated: 2022-01-06T06:55:56Z department: - _id: '152' language: - iso: eng page: '8697' publication: Applied Sciences 23/2020 (23) status: public title: Method for Systematic Assessment of Requirement Change Risk in Industrial Practice type: journal_article user_id: '21240' year: '2020' ... --- _id: '23532' author: - first_name: Iris full_name: Gräßler, Iris id: '47565' last_name: Gräßler orcid: 0000-0001-5765-971X - first_name: Henrik full_name: Thiele, Henrik id: '33419' last_name: Thiele - first_name: et. full_name: al., et. last_name: al. citation: ama: 'Gräßler I, Thiele H, al. et. Automation 2030. Zukunft gestalten - Szenarien und Empfehlungen. Düsseldorf: VDI-Verlag; 2020.' apa: 'Gräßler, I., Thiele, H., & al., et. (2020). Automation 2030. Zukunft gestalten - Szenarien und Empfehlungen. Düsseldorf: VDI-Verlag.' bibtex: '@book{Gräßler_Thiele_al._2020, place={Düsseldorf}, title={Automation 2030. Zukunft gestalten - Szenarien und Empfehlungen}, publisher={VDI-Verlag}, author={Gräßler, Iris and Thiele, Henrik and al., et.}, year={2020} }' chicago: 'Gräßler, Iris, Henrik Thiele, and et. al. Automation 2030. Zukunft gestalten - Szenarien und Empfehlungen. Düsseldorf: VDI-Verlag, 2020.' ieee: 'I. Gräßler, H. Thiele, and et. al., Automation 2030. Zukunft gestalten - Szenarien und Empfehlungen. Düsseldorf: VDI-Verlag, 2020.' mla: Gräßler, Iris, et al. Automation 2030. Zukunft gestalten - Szenarien und Empfehlungen. VDI-Verlag, 2020. short: I. Gräßler, H. Thiele, et. al., Automation 2030. Zukunft gestalten - Szenarien und Empfehlungen, VDI-Verlag, Düsseldorf, 2020. date_created: 2021-08-26T12:19:51Z date_updated: 2022-01-06T06:55:56Z department: - _id: '152' language: - iso: ger main_file_link: - url: https://www.vdi.de/ueber-uns/presse/publikationen/details/automation-2030-zukunft-gestalten-szenarien-und-empfehlungen place: Düsseldorf publisher: VDI-Verlag status: public title: Automation 2030. Zukunft gestalten - Szenarien und Empfehlungen type: book user_id: '33419' year: '2020' ... --- _id: '23533' author: - first_name: Rainer full_name: Stark, Rainer last_name: Stark - first_name: Klaus-Dieter full_name: Thoben, Klaus-Dieter last_name: Thoben - first_name: Detlef full_name: Gerhard, Detlef last_name: Gerhard - first_name: Hannes full_name: Hick, Hannes last_name: Hick - first_name: Eckhard full_name: Kirchner, Eckhard last_name: Kirchner - first_name: Reiner full_name: Anderl, Reiner last_name: Anderl - first_name: Sandro full_name: Wartzack, Sandro last_name: Wartzack - first_name: Frank-Lothar full_name: Krause, Frank-Lothar last_name: Krause - first_name: Iris full_name: Gräßler, Iris id: '47565' last_name: Gräßler orcid: 0000-0001-5765-971X - first_name: Jens full_name: Pottebaum, Jens id: '405' last_name: Pottebaum orcid: http://orcid.org/0000-0001-8778-2989 - first_name: Benjamin full_name: Schleich, Benjamin last_name: Schleich - first_name: Ralph full_name: Stelzer, Ralph last_name: Stelzer - first_name: Patrick full_name: Klein, Patrick last_name: Klein - first_name: Bernhard full_name: Saske, Bernhard last_name: Saske - first_name: Cordula full_name: Czwick, Cordula last_name: Czwick - first_name: Sonika full_name: Gogineni, Sonika last_name: Gogineni - first_name: Lukas full_name: Klimmeck, Lukas last_name: Klimmeck - first_name: Matthias full_name: Bajzek, Matthias last_name: Bajzek - first_name: Georg full_name: Jacobs, Georg last_name: Jacobs - first_name: Joerg full_name: Berroth, Joerg last_name: Berroth - first_name: Thomas full_name: Zimmermann, Thomas last_name: Zimmermann - first_name: Philipp full_name: Kranabitl, Philipp last_name: Kranabitl - first_name: Nicole full_name: Göckel, Nicole last_name: Göckel citation: ama: Stark R, Thoben K-D, Gerhard D, et al. Digitaler Zwilling - WiGeP Positionspapier. Wissenschaftliche Gesellschaft für Produktentwicklung (WiGeP); 2020. apa: Stark, R., Thoben, K.-D., Gerhard, D., Hick, H., Kirchner, E., Anderl, R., Wartzack, S., Krause, F.-L., Gräßler, I., Pottebaum, J., Schleich, B., Stelzer, R., Klein, P., Saske, B., Czwick, C., Gogineni, S., Klimmeck, L., Bajzek, M., Jacobs, G., … Göckel, N. (2020). Digitaler Zwilling - WiGeP Positionspapier. Wissenschaftliche Gesellschaft für Produktentwicklung (WiGeP). bibtex: '@book{Stark_Thoben_Gerhard_Hick_Kirchner_Anderl_Wartzack_Krause_Gräßler_Pottebaum_et al._2020, title={Digitaler Zwilling - WiGeP Positionspapier}, publisher={Wissenschaftliche Gesellschaft für Produktentwicklung (WiGeP)}, author={Stark, Rainer and Thoben, Klaus-Dieter and Gerhard, Detlef and Hick, Hannes and Kirchner, Eckhard and Anderl, Reiner and Wartzack, Sandro and Krause, Frank-Lothar and Gräßler, Iris and Pottebaum, Jens and et al.}, year={2020} }' chicago: Stark, Rainer, Klaus-Dieter Thoben, Detlef Gerhard, Hannes Hick, Eckhard Kirchner, Reiner Anderl, Sandro Wartzack, et al. Digitaler Zwilling - WiGeP Positionspapier. Wissenschaftliche Gesellschaft für Produktentwicklung (WiGeP), 2020. ieee: R. Stark et al., Digitaler Zwilling - WiGeP Positionspapier. Wissenschaftliche Gesellschaft für Produktentwicklung (WiGeP), 2020. mla: Stark, Rainer, et al. Digitaler Zwilling - WiGeP Positionspapier. Wissenschaftliche Gesellschaft für Produktentwicklung (WiGeP), 2020. short: R. Stark, K.-D. Thoben, D. Gerhard, H. Hick, E. Kirchner, R. Anderl, S. Wartzack, F.-L. Krause, I. Gräßler, J. Pottebaum, B. Schleich, R. Stelzer, P. Klein, B. Saske, C. Czwick, S. Gogineni, L. Klimmeck, M. Bajzek, G. Jacobs, J. Berroth, T. Zimmermann, P. Kranabitl, N. Göckel, Digitaler Zwilling - WiGeP Positionspapier, Wissenschaftliche Gesellschaft für Produktentwicklung (WiGeP), 2020. date_created: 2021-08-26T12:31:13Z date_updated: 2022-01-06T06:55:56Z department: - _id: '152' language: - iso: ger publisher: Wissenschaftliche Gesellschaft für Produktentwicklung (WiGeP) status: public title: Digitaler Zwilling - WiGeP Positionspapier type: report user_id: '77594' year: '2020' ... --- _id: '23780' author: - first_name: Catarina G. full_name: Braz, Catarina G. last_name: Braz - first_name: Nicole full_name: Lutters, Nicole id: '22006' last_name: Lutters - first_name: Jorge full_name: Rocha, Jorge last_name: Rocha - first_name: Ricardo full_name: Alvim, Ricardo last_name: Alvim - first_name: Eugeny full_name: Kenig, Eugeny id: '665' last_name: Kenig - first_name: Henrique A. full_name: Matos, Henrique A. last_name: Matos citation: ama: Braz CG, Lutters N, Rocha J, Alvim R, Kenig E, Matos HA. Modeling and Simulation of an Industrial Formaldehyde Absorption System. Industrial & Engineering Chemistry Research. 2020;59:5996-6006. doi:10.1021/acs.iecr.9b07013 apa: Braz, C. G., Lutters, N., Rocha, J., Alvim, R., Kenig, E., & Matos, H. A. (2020). Modeling and Simulation of an Industrial Formaldehyde Absorption System. Industrial & Engineering Chemistry Research, 59, 5996–6006. https://doi.org/10.1021/acs.iecr.9b07013 bibtex: '@article{Braz_Lutters_Rocha_Alvim_Kenig_Matos_2020, title={Modeling and Simulation of an Industrial Formaldehyde Absorption System}, volume={59}, DOI={10.1021/acs.iecr.9b07013}, journal={Industrial & Engineering Chemistry Research}, author={Braz, Catarina G. and Lutters, Nicole and Rocha, Jorge and Alvim, Ricardo and Kenig, Eugeny and Matos, Henrique A.}, year={2020}, pages={5996–6006} }' chicago: 'Braz, Catarina G., Nicole Lutters, Jorge Rocha, Ricardo Alvim, Eugeny Kenig, and Henrique A. Matos. “Modeling and Simulation of an Industrial Formaldehyde Absorption System.” Industrial & Engineering Chemistry Research 59 (2020): 5996–6006. https://doi.org/10.1021/acs.iecr.9b07013.' ieee: 'C. G. Braz, N. Lutters, J. Rocha, R. Alvim, E. Kenig, and H. A. Matos, “Modeling and Simulation of an Industrial Formaldehyde Absorption System,” Industrial & Engineering Chemistry Research, vol. 59, pp. 5996–6006, 2020, doi: 10.1021/acs.iecr.9b07013.' mla: Braz, Catarina G., et al. “Modeling and Simulation of an Industrial Formaldehyde Absorption System.” Industrial & Engineering Chemistry Research, vol. 59, 2020, pp. 5996–6006, doi:10.1021/acs.iecr.9b07013. short: C.G. Braz, N. Lutters, J. Rocha, R. Alvim, E. Kenig, H.A. Matos, Industrial & Engineering Chemistry Research 59 (2020) 5996–6006. date_created: 2021-09-06T08:50:59Z date_updated: 2022-01-06T06:55:59Z department: - _id: '9' - _id: '145' doi: 10.1021/acs.iecr.9b07013 intvolume: ' 59' language: - iso: eng page: 5996-6006 publication: Industrial & Engineering Chemistry Research publication_identifier: issn: - 0888-5885 - 1520-5045 publication_status: published status: public title: Modeling and Simulation of an Industrial Formaldehyde Absorption System type: journal_article user_id: '22006' volume: 59 year: '2020' ... --- _id: '23781' author: - first_name: Mayurkumar P. full_name: Patil, Mayurkumar P. last_name: Patil - first_name: Prakash D. full_name: Vaidya, Prakash D. last_name: Vaidya - first_name: Eugeny full_name: Kenig, Eugeny id: '665' last_name: Kenig citation: ama: Patil MP, Vaidya PD, Kenig E. Kinetics of Carbon Dioxide Removal Using N-Acetylglucosamine. ACS Omega. 2020;5:27043-27049. doi:10.1021/acsomega.0c02076 apa: Patil, M. P., Vaidya, P. D., & Kenig, E. (2020). Kinetics of Carbon Dioxide Removal Using N-Acetylglucosamine. ACS Omega, 5, 27043–27049. https://doi.org/10.1021/acsomega.0c02076 bibtex: '@article{Patil_Vaidya_Kenig_2020, title={Kinetics of Carbon Dioxide Removal Using N-Acetylglucosamine}, volume={5}, DOI={10.1021/acsomega.0c02076}, journal={ACS Omega}, author={Patil, Mayurkumar P. and Vaidya, Prakash D. and Kenig, Eugeny}, year={2020}, pages={27043–27049} }' chicago: 'Patil, Mayurkumar P., Prakash D. Vaidya, and Eugeny Kenig. “Kinetics of Carbon Dioxide Removal Using N-Acetylglucosamine.” ACS Omega 5 (2020): 27043–49. https://doi.org/10.1021/acsomega.0c02076.' ieee: 'M. P. Patil, P. D. Vaidya, and E. Kenig, “Kinetics of Carbon Dioxide Removal Using N-Acetylglucosamine,” ACS Omega, vol. 5, pp. 27043–27049, 2020, doi: 10.1021/acsomega.0c02076.' mla: Patil, Mayurkumar P., et al. “Kinetics of Carbon Dioxide Removal Using N-Acetylglucosamine.” ACS Omega, vol. 5, 2020, pp. 27043–49, doi:10.1021/acsomega.0c02076. short: M.P. Patil, P.D. Vaidya, E. Kenig, ACS Omega 5 (2020) 27043–27049. date_created: 2021-09-06T09:35:14Z date_updated: 2022-01-06T06:55:59Z department: - _id: '9' - _id: '145' doi: 10.1021/acsomega.0c02076 intvolume: ' 5' language: - iso: eng page: 27043-27049 publication: ACS Omega publication_identifier: issn: - 2470-1343 - 2470-1343 publication_status: published status: public title: Kinetics of Carbon Dioxide Removal Using N-Acetylglucosamine type: journal_article user_id: '22006' volume: 5 year: '2020' ... --- _id: '23782' author: - first_name: Alexander full_name: Kronberg, Alexander last_name: Kronberg - first_name: Maxim full_name: Glushenkov, Maxim last_name: Glushenkov - first_name: Torben full_name: Knoke, Torben last_name: Knoke - first_name: Eugeny full_name: Kenig, Eugeny id: '665' last_name: Kenig citation: ama: Kronberg A, Glushenkov M, Knoke T, Kenig E. Theoretical limits on the heat regeneration degree. International Journal of Heat and Mass Transfer. 2020;161:120282. doi:10.1016/j.ijheatmasstransfer.2020.120282 apa: Kronberg, A., Glushenkov, M., Knoke, T., & Kenig, E. (2020). Theoretical limits on the heat regeneration degree. International Journal of Heat and Mass Transfer, 161, 120282. https://doi.org/10.1016/j.ijheatmasstransfer.2020.120282 bibtex: '@article{Kronberg_Glushenkov_Knoke_Kenig_2020, title={Theoretical limits on the heat regeneration degree}, volume={161}, DOI={10.1016/j.ijheatmasstransfer.2020.120282}, journal={International Journal of Heat and Mass Transfer}, author={Kronberg, Alexander and Glushenkov, Maxim and Knoke, Torben and Kenig, Eugeny}, year={2020}, pages={120282} }' chicago: 'Kronberg, Alexander, Maxim Glushenkov, Torben Knoke, and Eugeny Kenig. “Theoretical Limits on the Heat Regeneration Degree.” International Journal of Heat and Mass Transfer 161 (2020): 120282. https://doi.org/10.1016/j.ijheatmasstransfer.2020.120282.' ieee: 'A. Kronberg, M. Glushenkov, T. Knoke, and E. Kenig, “Theoretical limits on the heat regeneration degree,” International Journal of Heat and Mass Transfer, vol. 161, p. 120282, 2020, doi: 10.1016/j.ijheatmasstransfer.2020.120282.' mla: Kronberg, Alexander, et al. “Theoretical Limits on the Heat Regeneration Degree.” International Journal of Heat and Mass Transfer, vol. 161, 2020, p. 120282, doi:10.1016/j.ijheatmasstransfer.2020.120282. short: A. Kronberg, M. Glushenkov, T. Knoke, E. Kenig, International Journal of Heat and Mass Transfer 161 (2020) 120282. date_created: 2021-09-06T09:45:16Z date_updated: 2022-01-06T06:55:59Z department: - _id: '9' - _id: '145' doi: 10.1016/j.ijheatmasstransfer.2020.120282 intvolume: ' 161' language: - iso: eng page: '120282' publication: International Journal of Heat and Mass Transfer publication_identifier: issn: - 0017-9310 publication_status: published status: public title: Theoretical limits on the heat regeneration degree type: journal_article user_id: '22006' volume: 161 year: '2020' ... --- _id: '23784' author: - first_name: Alexander full_name: Olenberg, Alexander id: '11112' last_name: Olenberg - first_name: Eugeny full_name: Kenig, Eugeny id: '665' last_name: Kenig citation: ama: Olenberg A, Kenig E. Numerical investigation of liquid flow morphology in structured packings. Chemical Engineering Science. 2020;219:115559. doi:10.1016/j.ces.2020.115559 apa: Olenberg, A., & Kenig, E. (2020). Numerical investigation of liquid flow morphology in structured packings. Chemical Engineering Science, 219, 115559. https://doi.org/10.1016/j.ces.2020.115559 bibtex: '@article{Olenberg_Kenig_2020, title={Numerical investigation of liquid flow morphology in structured packings}, volume={219}, DOI={10.1016/j.ces.2020.115559}, journal={Chemical Engineering Science}, author={Olenberg, Alexander and Kenig, Eugeny}, year={2020}, pages={115559} }' chicago: 'Olenberg, Alexander, and Eugeny Kenig. “Numerical Investigation of Liquid Flow Morphology in Structured Packings.” Chemical Engineering Science 219 (2020): 115559. https://doi.org/10.1016/j.ces.2020.115559.' ieee: 'A. Olenberg and E. Kenig, “Numerical investigation of liquid flow morphology in structured packings,” Chemical Engineering Science, vol. 219, p. 115559, 2020, doi: 10.1016/j.ces.2020.115559.' mla: Olenberg, Alexander, and Eugeny Kenig. “Numerical Investigation of Liquid Flow Morphology in Structured Packings.” Chemical Engineering Science, vol. 219, 2020, p. 115559, doi:10.1016/j.ces.2020.115559. short: A. Olenberg, E. Kenig, Chemical Engineering Science 219 (2020) 115559. date_created: 2021-09-06T09:57:23Z date_updated: 2022-01-06T06:55:59Z department: - _id: '9' - _id: '145' doi: 10.1016/j.ces.2020.115559 intvolume: ' 219' language: - iso: eng page: '115559' project: - _id: '52' name: Computing Resources Provided by the Paderborn Center for Parallel Computing publication: Chemical Engineering Science publication_identifier: issn: - 0009-2509 publication_status: published status: public title: Numerical investigation of liquid flow morphology in structured packings type: journal_article user_id: '22006' volume: 219 year: '2020' ... --- _id: '23788' article_number: '120567' author: - first_name: A. full_name: Zibart, A. last_name: Zibart - first_name: E.Y. full_name: Kenig, E.Y. last_name: Kenig citation: ama: Zibart A, Kenig EY. Numerical investigation of conjugate heat transfer in a pillow-plate heat exchanger. International Journal of Heat and Mass Transfer. 2020. doi:10.1016/j.ijheatmasstransfer.2020.120567 apa: Zibart, A., & Kenig, E. Y. (2020). Numerical investigation of conjugate heat transfer in a pillow-plate heat exchanger. International Journal of Heat and Mass Transfer. https://doi.org/10.1016/j.ijheatmasstransfer.2020.120567 bibtex: '@article{Zibart_Kenig_2020, title={Numerical investigation of conjugate heat transfer in a pillow-plate heat exchanger}, DOI={10.1016/j.ijheatmasstransfer.2020.120567}, number={120567}, journal={International Journal of Heat and Mass Transfer}, author={Zibart, A. and Kenig, E.Y.}, year={2020} }' chicago: Zibart, A., and E.Y. Kenig. “Numerical Investigation of Conjugate Heat Transfer in a Pillow-Plate Heat Exchanger.” International Journal of Heat and Mass Transfer, 2020. https://doi.org/10.1016/j.ijheatmasstransfer.2020.120567. ieee: A. Zibart and E. Y. Kenig, “Numerical investigation of conjugate heat transfer in a pillow-plate heat exchanger,” International Journal of Heat and Mass Transfer, 2020. mla: Zibart, A., and E. Y. Kenig. “Numerical Investigation of Conjugate Heat Transfer in a Pillow-Plate Heat Exchanger.” International Journal of Heat and Mass Transfer, 120567, 2020, doi:10.1016/j.ijheatmasstransfer.2020.120567. short: A. Zibart, E.Y. Kenig, International Journal of Heat and Mass Transfer (2020). date_created: 2021-09-06T10:30:32Z date_updated: 2022-01-06T06:55:59Z department: - _id: '145' - _id: '9' doi: 10.1016/j.ijheatmasstransfer.2020.120567 language: - iso: eng project: - _id: '52' name: Computing Resources Provided by the Paderborn Center for Parallel Computing publication: International Journal of Heat and Mass Transfer publication_identifier: issn: - 0017-9310 publication_status: published status: public title: Numerical investigation of conjugate heat transfer in a pillow-plate heat exchanger type: journal_article user_id: '11029' year: '2020' ... --- _id: '23796' author: - first_name: Sören Antonius full_name: Bernemann, Sören Antonius id: '70108' last_name: Bernemann citation: ama: Bernemann SA. Erstellung eines CFD-Modells für die Entwicklung eines innovativen Trennapparates zur Stickstoffrückgewinnung aus landwirtschaftlichen Abfällen. Paderborn; 2020. apa: Bernemann, S. A. (2020). Erstellung eines CFD-Modells für die Entwicklung eines innovativen Trennapparates zur Stickstoffrückgewinnung aus landwirtschaftlichen Abfällen. Paderborn. bibtex: '@book{Bernemann_2020, place={Paderborn}, title={Erstellung eines CFD-Modells für die Entwicklung eines innovativen Trennapparates zur Stickstoffrückgewinnung aus landwirtschaftlichen Abfällen}, author={Bernemann, Sören Antonius}, year={2020} }' chicago: Bernemann, Sören Antonius. Erstellung eines CFD-Modells für die Entwicklung eines innovativen Trennapparates zur Stickstoffrückgewinnung aus landwirtschaftlichen Abfällen. Paderborn, 2020. ieee: S. A. Bernemann, Erstellung eines CFD-Modells für die Entwicklung eines innovativen Trennapparates zur Stickstoffrückgewinnung aus landwirtschaftlichen Abfällen. Paderborn, 2020. mla: Bernemann, Sören Antonius. Erstellung eines CFD-Modells für die Entwicklung eines innovativen Trennapparates zur Stickstoffrückgewinnung aus landwirtschaftlichen Abfällen. 2020. short: S.A. Bernemann, Erstellung eines CFD-Modells für die Entwicklung eines innovativen Trennapparates zur Stickstoffrückgewinnung aus landwirtschaftlichen Abfällen, Paderborn, 2020. date_created: 2021-09-06T12:46:15Z date_updated: 2022-01-06T06:56:00Z department: - _id: '9' - _id: '145' keyword: - CFD - landwirtschaftliche Abfälle - Volume-of-Fluid language: - iso: ger place: Paderborn project: - _id: '52' name: Computing Resources Provided by the Paderborn Center for Parallel Computing status: public supervisor: - first_name: René full_name: Bertling, René id: '30050' last_name: Bertling title: Erstellung eines CFD-Modells für die Entwicklung eines innovativen Trennapparates zur Stickstoffrückgewinnung aus landwirtschaftlichen Abfällen type: mastersthesis user_id: '70108' year: '2020' ... --- _id: '23801' author: - first_name: Alexander full_name: Reitz, Alexander id: '24803' last_name: Reitz orcid: 0000-0001-9047-467X - first_name: Olexandr full_name: Grydin, Olexandr id: '43822' last_name: Grydin - first_name: Mirko full_name: Schaper, Mirko id: '43720' last_name: Schaper citation: ama: 'Reitz A, Grydin O, Schaper M. Phase Transformation Characterization by Means of High Temperature Digital Image Correlation for Graded Thermo-Mechanical Processing of Sheet Parts. In: The Minerals, Metals & Materials Series. Springer; 2020. doi:10.1007/978-3-030-36628-5_7' apa: Reitz, A., Grydin, O., & Schaper, M. (2020). Phase Transformation Characterization by Means of High Temperature Digital Image Correlation for Graded Thermo-Mechanical Processing of Sheet Parts. In The Minerals, Metals & Materials Series. Springer. https://doi.org/10.1007/978-3-030-36628-5_7 bibtex: '@inbook{Reitz_Grydin_Schaper_2020, place={Cham}, title={Phase Transformation Characterization by Means of High Temperature Digital Image Correlation for Graded Thermo-Mechanical Processing of Sheet Parts}, DOI={10.1007/978-3-030-36628-5_7}, booktitle={The Minerals, Metals & Materials Series}, publisher={Springer}, author={Reitz, Alexander and Grydin, Olexandr and Schaper, Mirko}, year={2020} }' chicago: 'Reitz, Alexander, Olexandr Grydin, and Mirko Schaper. “Phase Transformation Characterization by Means of High Temperature Digital Image Correlation for Graded Thermo-Mechanical Processing of Sheet Parts.” In The Minerals, Metals & Materials Series. Cham: Springer, 2020. https://doi.org/10.1007/978-3-030-36628-5_7.' ieee: 'A. Reitz, O. Grydin, and M. Schaper, “Phase Transformation Characterization by Means of High Temperature Digital Image Correlation for Graded Thermo-Mechanical Processing of Sheet Parts,” in The Minerals, Metals & Materials Series, Cham: Springer, 2020.' mla: Reitz, Alexander, et al. “Phase Transformation Characterization by Means of High Temperature Digital Image Correlation for Graded Thermo-Mechanical Processing of Sheet Parts.” The Minerals, Metals & Materials Series, Springer, 2020, doi:10.1007/978-3-030-36628-5_7. short: 'A. Reitz, O. Grydin, M. Schaper, in: The Minerals, Metals & Materials Series, Springer, Cham, 2020.' date_created: 2021-09-06T13:24:55Z date_updated: 2022-01-06T06:56:00Z department: - _id: '158' - _id: '321' doi: 10.1007/978-3-030-36628-5_7 language: - iso: eng main_file_link: - url: https://link.springer.com/chapter/10.1007/978-3-030-36628-5_7 place: Cham publication: The Minerals, Metals & Materials Series publication_identifier: issn: - 2367-1181 - 2367-1696 publication_status: published publisher: Springer quality_controlled: '1' status: public title: Phase Transformation Characterization by Means of High Temperature Digital Image Correlation for Graded Thermo-Mechanical Processing of Sheet Parts type: book_chapter user_id: '24803' year: '2020' ... --- _id: '23861' author: - first_name: Matthias full_name: Altepeter, Matthias id: '33420' last_name: Altepeter - first_name: Volker full_name: Schöppner, Volker id: '20530' last_name: Schöppner citation: ama: Altepeter M, Schöppner V. Materialabbau im Doppelschneckenextruder. Kunststoffe. Published online 2020. apa: Altepeter, M., & Schöppner, V. (2020). Materialabbau im Doppelschneckenextruder. Kunststoffe. bibtex: '@article{Altepeter_Schöppner_2020, title={Materialabbau im Doppelschneckenextruder}, journal={Kunststoffe}, publisher={Carl Hanser Verlag}, author={Altepeter, Matthias and Schöppner, Volker}, year={2020} }' chicago: Altepeter, Matthias, and Volker Schöppner. “Materialabbau Im Doppelschneckenextruder.” Kunststoffe, 2020. ieee: M. Altepeter and V. Schöppner, “Materialabbau im Doppelschneckenextruder,” Kunststoffe, 2020. mla: Altepeter, Matthias, and Volker Schöppner. “Materialabbau Im Doppelschneckenextruder.” Kunststoffe, Carl Hanser Verlag, 2020. short: M. Altepeter, V. Schöppner, Kunststoffe (2020). date_created: 2021-09-07T10:45:44Z date_updated: 2022-01-06T06:56:02Z department: - _id: '9' - _id: '367' - _id: '321' language: - iso: eng publication: Kunststoffe publisher: Carl Hanser Verlag status: public title: Materialabbau im Doppelschneckenextruder type: journal_article user_id: '33420' year: '2020' ... --- _id: '23865' abstract: - lang: eng text: "Regarding the design of single screw extruders, the prediction of the throughput needs to be of high accuracy. The calculation of the solids conveying throughput is particularly important for extruders with a grooved feed section. In contrast to smooth barrel extruders the throughput of the entire plant is determined at the feed section. Various simplifications are necessary for an analytical modelling of the solids conveying, e.g. the classification into conveying cases, the assumption of solid block flow and the assumption of pressure anisotropy coefficients. In numerical simulations with the Discrete Element Method (DEM), which has recently been successfully used to describe solids conveying in smooth barrel extruders, the simplifications mentioned above are not taken into account. Here, the pellets are approximated as spherical particles or particles composed of spheres. Based on virtual overlaps, contact models and the solution of Newton's equations of motion, a more complex consideration of the pellet flow is possible. In each iteration step of the simulation, the particle velocities, contact forces and derived quantities, e.g. the mass throughput in the screw channel and the grooves or the radial pressure build-up along the grooved barrel can be evaluated. Therefore, a DEM simulation model can be investigated by means of statistical design of experiments in order to convert the target values into a metamodel by regression. Long computation times of numerical simulations will be avoided in this matter as well as too simple assumptions of analytical approaches. The influencing parameters to be simulated are divided into material, geometry and process parameters. Relevant material parameters are the coefficients of friction of the polymer-polymer and polymer-steel surface as well as the restitution coefficient and the particle diameter. The geometry is varied in the form of the screw diameter, the channel depth and pitch, the number of grooves and their width, depth and angle. By varying the angle, both conventional axial grooves and helical grooves are taken into account. Finally, the process parameters speed and backpressure are also considered in the simulations. In order to reduce the simulation effort, irrelevant parameters are identified in preliminary investigations.\r\n" author: - first_name: Volker full_name: Schöppner, Volker id: '20530' last_name: Schöppner - first_name: Florian full_name: Brüning, Florian id: '72920' last_name: Brüning citation: ama: 'Schöppner V, Brüning F. Development of a Solids Conveying Throughput Model for Grooved Barrel Extruders based on Discrete Element Simulations. In: Hopmann C, Dahlmann R, eds. Advances in Polymer Processing 2020: Proceedings of the International Symposium on Plastics Technology. Springer; 2020.' apa: 'Schöppner, V., & Brüning, F. (2020). Development of a Solids Conveying Throughput Model for Grooved Barrel Extruders based on Discrete Element Simulations. In C. Hopmann & R. Dahlmann (Eds.), Advances in Polymer Processing 2020: Proceedings of the International Symposium on Plastics Technology. Springer.' bibtex: '@inproceedings{Schöppner_Brüning_2020, title={Development of a Solids Conveying Throughput Model for Grooved Barrel Extruders based on Discrete Element Simulations}, booktitle={Advances in Polymer Processing 2020: Proceedings of the International Symposium on Plastics Technology}, publisher={Springer}, author={Schöppner, Volker and Brüning, Florian}, editor={Hopmann, Christian and Dahlmann, Rainer}, year={2020} }' chicago: 'Schöppner, Volker, and Florian Brüning. “Development of a Solids Conveying Throughput Model for Grooved Barrel Extruders Based on Discrete Element Simulations.” In Advances in Polymer Processing 2020: Proceedings of the International Symposium on Plastics Technology, edited by Christian Hopmann and Rainer Dahlmann. Springer, 2020.' ieee: 'V. Schöppner and F. Brüning, “Development of a Solids Conveying Throughput Model for Grooved Barrel Extruders based on Discrete Element Simulations,” in Advances in Polymer Processing 2020: Proceedings of the International Symposium on Plastics Technology, 2020.' mla: 'Schöppner, Volker, and Florian Brüning. “Development of a Solids Conveying Throughput Model for Grooved Barrel Extruders Based on Discrete Element Simulations.” Advances in Polymer Processing 2020: Proceedings of the International Symposium on Plastics Technology, edited by Christian Hopmann and Rainer Dahlmann, Springer, 2020.' short: 'V. Schöppner, F. Brüning, in: C. Hopmann, R. Dahlmann (Eds.), Advances in Polymer Processing 2020: Proceedings of the International Symposium on Plastics Technology, Springer, 2020.' date_created: 2021-09-07T11:21:23Z date_updated: 2022-01-06T06:56:02Z department: - _id: '9' - _id: '367' editor: - first_name: Christian full_name: Hopmann, Christian last_name: Hopmann - first_name: Rainer full_name: Dahlmann, Rainer last_name: Dahlmann language: - iso: eng publication: 'Advances in Polymer Processing 2020: Proceedings of the International Symposium on Plastics Technology' publication_identifier: unknown: - '9783662608081' publication_status: published publisher: Springer quality_controlled: '1' status: public title: Development of a Solids Conveying Throughput Model for Grooved Barrel Extruders based on Discrete Element Simulations type: conference user_id: '72920' year: '2020' ... --- _id: '23868' author: - first_name: Mirko full_name: Albrecht, Mirko last_name: Albrecht - first_name: Max full_name: Bialaschik, Max id: '32297' last_name: Bialaschik - first_name: Michael full_name: Gehde, Michael last_name: Gehde - first_name: Volker full_name: Schöppner, Volker id: '20530' last_name: Schöppner citation: ama: Albrecht M, Bialaschik M, Gehde M, Schöppner V. Einfluss der Materialschädigung auf die Schweißnahtqualität beim Warmgasstumpfschweißen von Polyamiden. DVS CONGRESS 2020 - Große Schweißtechnische Tagung. 2020;365. apa: Albrecht, M., Bialaschik, M., Gehde, M., & Schöppner, V. (2020). Einfluss der Materialschädigung auf die Schweißnahtqualität beim Warmgasstumpfschweißen von Polyamiden. DVS CONGRESS 2020 - Große Schweißtechnische Tagung, 365. bibtex: '@article{Albrecht_Bialaschik_Gehde_Schöppner_2020, title={Einfluss der Materialschädigung auf die Schweißnahtqualität beim Warmgasstumpfschweißen von Polyamiden}, volume={365}, journal={DVS CONGRESS 2020 - Große Schweißtechnische Tagung}, publisher={DVS Media GmbH}, author={Albrecht, Mirko and Bialaschik, Max and Gehde, Michael and Schöppner, Volker}, year={2020} }' chicago: Albrecht, Mirko, Max Bialaschik, Michael Gehde, and Volker Schöppner. “Einfluss der Materialschädigung auf die Schweißnahtqualität beim Warmgasstumpfschweißen von Polyamiden.” DVS CONGRESS 2020 - Große Schweißtechnische Tagung 365 (2020). ieee: M. Albrecht, M. Bialaschik, M. Gehde, and V. Schöppner, “Einfluss der Materialschädigung auf die Schweißnahtqualität beim Warmgasstumpfschweißen von Polyamiden,” DVS CONGRESS 2020 - Große Schweißtechnische Tagung, vol. 365, 2020. mla: Albrecht, Mirko, et al. “Einfluss der Materialschädigung auf die Schweißnahtqualität beim Warmgasstumpfschweißen von Polyamiden.” DVS CONGRESS 2020 - Große Schweißtechnische Tagung, vol. 365, DVS Media GmbH, 2020. short: M. Albrecht, M. Bialaschik, M. Gehde, V. Schöppner, DVS CONGRESS 2020 - Große Schweißtechnische Tagung 365 (2020). date_created: 2021-09-07T11:41:52Z date_updated: 2022-01-06T06:56:02Z department: - _id: '9' - _id: '367' - _id: '321' intvolume: ' 365' language: - iso: ger publication: DVS CONGRESS 2020 - Große Schweißtechnische Tagung publication_identifier: isbn: - '978-3-96144-098-6 ' publisher: DVS Media GmbH status: public title: Einfluss der Materialschädigung auf die Schweißnahtqualität beim Warmgasstumpfschweißen von Polyamiden type: journal_article user_id: '32297' volume: 365 year: '2020' ... --- _id: '23873' author: - first_name: Mirko full_name: Albrecht, Mirko last_name: Albrecht - first_name: Max full_name: Bialaschik, Max id: '32297' last_name: Bialaschik - first_name: Michael full_name: Gehde, Michael last_name: Gehde - first_name: Volker full_name: Schöppner, Volker id: '20530' last_name: Schöppner citation: ama: 'Albrecht M, Bialaschik M, Gehde M, Schöppner V. Hot gas welding – Influences of the tool design. In: ; 2020. doi:10.1063/5.0029478' apa: Albrecht, M., Bialaschik, M., Gehde, M., & Schöppner, V. (2020). Hot gas welding – Influences of the tool design. PPS2019 Europe-Africa Regional Conference of the Polymer Processing Society, Pretoria. https://doi.org/10.1063/5.0029478 bibtex: '@inproceedings{Albrecht_Bialaschik_Gehde_Schöppner_2020, title={Hot gas welding – Influences of the tool design}, DOI={10.1063/5.0029478}, author={Albrecht, Mirko and Bialaschik, Max and Gehde, Michael and Schöppner, Volker}, year={2020} }' chicago: Albrecht, Mirko, Max Bialaschik, Michael Gehde, and Volker Schöppner. “Hot Gas Welding – Influences of the Tool Design,” 2020. https://doi.org/10.1063/5.0029478. ieee: 'M. Albrecht, M. Bialaschik, M. Gehde, and V. Schöppner, “Hot gas welding – Influences of the tool design,” presented at the PPS2019 Europe-Africa Regional Conference of the Polymer Processing Society, Pretoria, 2020, doi: 10.1063/5.0029478.' mla: Albrecht, Mirko, et al. Hot Gas Welding – Influences of the Tool Design. 2020, doi:10.1063/5.0029478. short: 'M. Albrecht, M. Bialaschik, M. Gehde, V. Schöppner, in: 2020.' conference: location: Pretoria name: PPS2019 Europe-Africa Regional Conference of the Polymer Processing Society date_created: 2021-09-07T11:48:32Z date_updated: 2022-01-06T06:56:02Z department: - _id: '9' - _id: '367' - _id: '321' doi: 10.1063/5.0029478 language: - iso: eng publication_status: published status: public title: Hot gas welding – Influences of the tool design type: conference user_id: '32297' year: '2020' ... --- _id: '24005' article_number: '100032' author: - first_name: Jan-Peter full_name: Brüggemann, Jan-Peter last_name: Brüggemann - first_name: Lena full_name: Risse, Lena id: '27356' last_name: Risse - first_name: Steven Clifford full_name: Woodcock, Steven Clifford id: '60486' last_name: Woodcock - first_name: Tintu David full_name: Joy, Tintu David id: '30821' last_name: Joy - first_name: Johannes full_name: Neumann, Johannes last_name: Neumann - first_name: Jakub full_name: Vidner, Jakub last_name: Vidner - first_name: Gunter full_name: Kullmer, Gunter id: '291' last_name: Kullmer - first_name: Hans Albert full_name: Richard, Hans Albert last_name: Richard citation: ama: Brüggemann J-P, Risse L, Woodcock SC, et al. Structural optimization of a wheel force transducer component for more realistic acquisition of vehicle load data and fracture mechanical evaluation. Applications in Engineering Science. Published online 2020. doi:10.1016/j.apples.2020.100032 apa: Brüggemann, J.-P., Risse, L., Woodcock, S. C., Joy, T. D., Neumann, J., Vidner, J., Kullmer, G., & Richard, H. A. (2020). Structural optimization of a wheel force transducer component for more realistic acquisition of vehicle load data and fracture mechanical evaluation. Applications in Engineering Science, Article 100032. https://doi.org/10.1016/j.apples.2020.100032 bibtex: '@article{Brüggemann_Risse_Woodcock_Joy_Neumann_Vidner_Kullmer_Richard_2020, title={Structural optimization of a wheel force transducer component for more realistic acquisition of vehicle load data and fracture mechanical evaluation}, DOI={10.1016/j.apples.2020.100032}, number={100032}, journal={Applications in Engineering Science}, author={Brüggemann, Jan-Peter and Risse, Lena and Woodcock, Steven Clifford and Joy, Tintu David and Neumann, Johannes and Vidner, Jakub and Kullmer, Gunter and Richard, Hans Albert}, year={2020} }' chicago: Brüggemann, Jan-Peter, Lena Risse, Steven Clifford Woodcock, Tintu David Joy, Johannes Neumann, Jakub Vidner, Gunter Kullmer, and Hans Albert Richard. “Structural Optimization of a Wheel Force Transducer Component for More Realistic Acquisition of Vehicle Load Data and Fracture Mechanical Evaluation.” Applications in Engineering Science, 2020. https://doi.org/10.1016/j.apples.2020.100032. ieee: 'J.-P. Brüggemann et al., “Structural optimization of a wheel force transducer component for more realistic acquisition of vehicle load data and fracture mechanical evaluation,” Applications in Engineering Science, Art. no. 100032, 2020, doi: 10.1016/j.apples.2020.100032.' mla: Brüggemann, Jan-Peter, et al. “Structural Optimization of a Wheel Force Transducer Component for More Realistic Acquisition of Vehicle Load Data and Fracture Mechanical Evaluation.” Applications in Engineering Science, 100032, 2020, doi:10.1016/j.apples.2020.100032. short: J.-P. Brüggemann, L. Risse, S.C. Woodcock, T.D. Joy, J. Neumann, J. Vidner, G. Kullmer, H.A. Richard, Applications in Engineering Science (2020). date_created: 2021-09-09T09:32:21Z date_updated: 2022-01-06T06:56:05Z department: - _id: '143' doi: 10.1016/j.apples.2020.100032 language: - iso: eng publication: Applications in Engineering Science publication_identifier: issn: - 2666-4968 publication_status: published status: public title: Structural optimization of a wheel force transducer component for more realistic acquisition of vehicle load data and fracture mechanical evaluation type: journal_article user_id: '45673' year: '2020' ...