---
_id: '60681'
article_type: original
author:
- first_name: Edith Benjamina
full_name: Díaz Canales, Edith Benjamina
id: '105704'
last_name: Díaz Canales
orcid: 0009-0007-2748-0074
- first_name: Alfredo
full_name: Avila Galarza, Alfredo
last_name: Avila Galarza
- first_name: Sabine
full_name: Schlüter, Sabine
last_name: Schlüter
- first_name: Erick
full_name: Lacayo Escobar, Erick
last_name: Lacayo Escobar
- first_name: Alexander
full_name: Schlüter, Alexander
id: '103302'
last_name: Schlüter
orcid: 0000-0002-2569-1624
citation:
ama: 'Díaz Canales EB, Avila Galarza A, Schlüter S, Lacayo Escobar E, Schlüter A.
Implementing Strategic Environmental Assessment in the Global South, a Challenge:
Nicaragua as a Case Study. Journal of Sustainable Development Indicators.
2025;1(2):1-26. doi:10.13044/j.sdi.d2.0592'
apa: 'Díaz Canales, E. B., Avila Galarza, A., Schlüter, S., Lacayo Escobar, E.,
& Schlüter, A. (2025). Implementing Strategic Environmental Assessment in
the Global South, a Challenge: Nicaragua as a Case Study. Journal of Sustainable
Development Indicators, 1(2), 1–26. https://doi.org/10.13044/j.sdi.d2.0592'
bibtex: '@article{Díaz Canales_Avila Galarza_Schlüter_Lacayo Escobar_Schlüter_2025,
title={Implementing Strategic Environmental Assessment in the Global South, a
Challenge: Nicaragua as a Case Study}, volume={1}, DOI={10.13044/j.sdi.d2.0592},
number={2}, journal={Journal of Sustainable Development Indicators}, publisher={SDEWES
Centre}, author={Díaz Canales, Edith Benjamina and Avila Galarza, Alfredo and
Schlüter, Sabine and Lacayo Escobar, Erick and Schlüter, Alexander}, year={2025},
pages={1–26} }'
chicago: 'Díaz Canales, Edith Benjamina, Alfredo Avila Galarza, Sabine Schlüter,
Erick Lacayo Escobar, and Alexander Schlüter. “Implementing Strategic Environmental
Assessment in the Global South, a Challenge: Nicaragua as a Case Study.” Journal
of Sustainable Development Indicators 1, no. 2 (2025): 1–26. https://doi.org/10.13044/j.sdi.d2.0592.'
ieee: 'E. B. Díaz Canales, A. Avila Galarza, S. Schlüter, E. Lacayo Escobar, and
A. Schlüter, “Implementing Strategic Environmental Assessment in the Global South,
a Challenge: Nicaragua as a Case Study,” Journal of Sustainable Development
Indicators, vol. 1, no. 2, pp. 1–26, 2025, doi: 10.13044/j.sdi.d2.0592.'
mla: 'Díaz Canales, Edith Benjamina, et al. “Implementing Strategic Environmental
Assessment in the Global South, a Challenge: Nicaragua as a Case Study.” Journal
of Sustainable Development Indicators, vol. 1, no. 2, SDEWES Centre, 2025,
pp. 1–26, doi:10.13044/j.sdi.d2.0592.'
short: E.B. Díaz Canales, A. Avila Galarza, S. Schlüter, E. Lacayo Escobar, A. Schlüter,
Journal of Sustainable Development Indicators 1 (2025) 1–26.
date_created: 2025-07-21T09:04:07Z
date_updated: 2026-01-06T08:13:25Z
department:
- _id: '9'
- _id: '876'
- _id: '321'
- _id: '393'
doi: 10.13044/j.sdi.d2.0592
intvolume: ' 1'
issue: '2'
language:
- iso: eng
page: 1-26
publication: Journal of Sustainable Development Indicators
publication_identifier:
issn:
- 3044-5221
publication_status: published
publisher: SDEWES Centre
quality_controlled: '1'
status: public
title: 'Implementing Strategic Environmental Assessment in the Global South, a Challenge:
Nicaragua as a Case Study'
type: journal_article
user_id: '103302'
volume: 1
year: '2025'
...
---
_id: '59841'
author:
- first_name: Matteo
full_name: Genovese, Matteo
last_name: Genovese
- first_name: Francesco
full_name: Piraino, Francesco
last_name: Piraino
- first_name: Orlando
full_name: Corigliano, Orlando
last_name: Corigliano
- first_name: Alexander
full_name: Schlüter, Alexander
id: '103302'
last_name: Schlüter
orcid: 0000-0002-2569-1624
- first_name: Eugenio
full_name: Scionti, Eugenio
last_name: Scionti
- first_name: Petronilla
full_name: Fragiacomo, Petronilla
last_name: Fragiacomo
citation:
ama: 'Genovese M, Piraino F, Corigliano O, Schlüter A, Scionti E, Fragiacomo P.
Hydrogen economy development in the European Union. In: Accelerating the Transition
to a Hydrogen Economy. Elsevier; 2025. doi:10.1016/b978-0-443-24002-7.00005-7'
apa: Genovese, M., Piraino, F., Corigliano, O., Schlüter, A., Scionti, E., &
Fragiacomo, P. (2025). Hydrogen economy development in the European Union. In
Accelerating the Transition to a Hydrogen Economy. Elsevier. https://doi.org/10.1016/b978-0-443-24002-7.00005-7
bibtex: '@inbook{Genovese_Piraino_Corigliano_Schlüter_Scionti_Fragiacomo_2025, title={Hydrogen
economy development in the European Union}, DOI={10.1016/b978-0-443-24002-7.00005-7},
booktitle={Accelerating the Transition to a Hydrogen Economy}, publisher={Elsevier},
author={Genovese, Matteo and Piraino, Francesco and Corigliano, Orlando and Schlüter,
Alexander and Scionti, Eugenio and Fragiacomo, Petronilla}, year={2025} }'
chicago: Genovese, Matteo, Francesco Piraino, Orlando Corigliano, Alexander Schlüter,
Eugenio Scionti, and Petronilla Fragiacomo. “Hydrogen Economy Development in the
European Union.” In Accelerating the Transition to a Hydrogen Economy.
Elsevier, 2025. https://doi.org/10.1016/b978-0-443-24002-7.00005-7.
ieee: M. Genovese, F. Piraino, O. Corigliano, A. Schlüter, E. Scionti, and P. Fragiacomo,
“Hydrogen economy development in the European Union,” in Accelerating the Transition
to a Hydrogen Economy, Elsevier, 2025.
mla: Genovese, Matteo, et al. “Hydrogen Economy Development in the European Union.”
Accelerating the Transition to a Hydrogen Economy, Elsevier, 2025, doi:10.1016/b978-0-443-24002-7.00005-7.
short: 'M. Genovese, F. Piraino, O. Corigliano, A. Schlüter, E. Scionti, P. Fragiacomo,
in: Accelerating the Transition to a Hydrogen Economy, Elsevier, 2025.'
date_created: 2025-05-07T11:57:50Z
date_updated: 2026-01-06T08:23:15Z
department:
- _id: '876'
- _id: '321'
- _id: '9'
- _id: '393'
doi: 10.1016/b978-0-443-24002-7.00005-7
language:
- iso: eng
publication: Accelerating the Transition to a Hydrogen Economy
publication_identifier:
isbn:
- '9780443240027'
publication_status: published
publisher: Elsevier
status: public
title: Hydrogen economy development in the European Union
type: book_chapter
user_id: '103302'
year: '2025'
...
---
_id: '63511'
abstract:
- lang: eng
text: Der unsystematische und ineffiziente Umgang mit technischen Änderungen führt
zuhohen Personalkosten durch Mehraufwand, einer reduzierten Entscheidungsqualität
und kannin Projektfehlschlägen resultieren. Herausforderungen beim Umgang mit
technischen Änderungenliegen in der Berücksichtigung relevanter Ursache-Wirkungs-Zusammenhänge,
der quantitativen und qualitativen Bewertung der Auswirkungen und der effizienten
prozessualen Einbindung. Mithilfe eines modellbasierten Lösungsansatzes lassen
sich die Auswirkungen technischer Änderungen schneller bewerten und fundierte
Entwicklungsentscheidungen treffen. In der vorliegenden Dissertation wird eine
Methodik für die Entwicklung modell-basierter Wirkkettenanalysen zur Bewertung
technischer Änderungen beschrieben. Durch die modellbasierte Wirkkettenanalyse
können direkt oder indirekt von der Änderung betroffene Modellelemente identifiziert
werden. Das Datenmodell wird mithilfe von Abfragesprachen analysiert und die Auswirkungen
werden mithilfe von integrierten Metriken quantifiziert. Die Ergebnisse der Wirkkettenanalyse
werden in rollenspezifischen Sichten bereitgestellt, wodurch eine bedarfsgerechte
Entscheidungsunterstützung gewährleistet wird. Die Validierung anhand von vier
industriellen Fallstudien belegt die Praxistauglichkeit der Methodik. Die Methodik
verbindet das Änderungsmanagement mit den Vorteilen einer modellbasierten Systementwicklung
und bildet somit einen synergetischen neuen Forschungsbereich.
- lang: eng
text: The unsystematic and inefficient handling of technical changes leads to high
personnel costs due to additional work, reduced decision-making quality and can
result in project failures. The challenges in dealing with technical changes arise
in the consideration of relevant cause-and-effect relationships, the quantitative
and qualitative assessment of the effects and the efficient process integration.
With the help of a model-based solution approach, the effects of technical changes
can be assessed more quickly and profound development decisions can be made. This
dissertation describes a methodology for the development of model-based effect
chain analyses for the evaluation of technical changes. Model-based effect chain
analyses can be used to identify model elements that are directly or indirectly
affected by the change. The data model is analysed using query languages and the
effects are quantified using integrated metrics. The results of the impact chain
analysis are provided in role-specific views, which ensures needs-based decision
support. The validation based on four industrial case studies demonstrates the
practical applicability of the methodology. The methodology combines change management
with the advantages of model-based system development and thus forms a synergetic
new area of research.
author:
- first_name: Dominik
full_name: Wiechel, Dominik
last_name: Wiechel
citation:
ama: Wiechel D. Modellbasierte Wirkkettenanalyse Zur Bewertung Technischer Änderungen.
Vol 432.; 2025. doi:10.17619/UNIPB/1-2473
apa: Wiechel, D. (2025). Modellbasierte Wirkkettenanalyse zur Bewertung technischer
Änderungen (Vol. 432). https://doi.org/10.17619/UNIPB/1-2473
bibtex: '@book{Wiechel_2025, place={Paderborn}, series={Verlagsschriftenreihe des
Heinz Nixdorf Instituts}, title={Modellbasierte Wirkkettenanalyse zur Bewertung
technischer Änderungen}, volume={432}, DOI={10.17619/UNIPB/1-2473},
author={Wiechel, Dominik}, year={2025}, collection={Verlagsschriftenreihe des
Heinz Nixdorf Instituts} }'
chicago: Wiechel, Dominik. Modellbasierte Wirkkettenanalyse Zur Bewertung Technischer
Änderungen. Vol. 432. Verlagsschriftenreihe Des Heinz Nixdorf Instituts. Paderborn,
2025. https://doi.org/10.17619/UNIPB/1-2473.
ieee: D. Wiechel, Modellbasierte Wirkkettenanalyse zur Bewertung technischer
Änderungen, vol. 432. Paderborn, 2025.
mla: Wiechel, Dominik. Modellbasierte Wirkkettenanalyse Zur Bewertung Technischer
Änderungen. 2025, doi:10.17619/UNIPB/1-2473.
short: D. Wiechel, Modellbasierte Wirkkettenanalyse Zur Bewertung Technischer Änderungen,
Paderborn, 2025.
date_created: 2026-01-06T20:20:58Z
date_updated: 2026-01-06T20:27:08Z
department:
- _id: '152'
doi: 10.17619/UNIPB/1-2473
extern: '1'
intvolume: ' 432'
language:
- iso: eng
place: Paderborn
publication_identifier:
isbn:
- 978-3-947647-51-4
issn:
- 2365-4422
publication_status: published
series_title: Verlagsschriftenreihe des Heinz Nixdorf Instituts
status: public
title: Modellbasierte Wirkkettenanalyse zur Bewertung technischer Änderungen
type: dissertation
user_id: '67161'
volume: 432
year: '2025'
...
---
_id: '63527'
author:
- first_name: Mark
full_name: Henkenjohann, Mark
last_name: Henkenjohann
- first_name: Udo
full_name: Nolte, Udo
last_name: Nolte
- first_name: Julien
full_name: Jahneke, Julien
last_name: Jahneke
- first_name: Oliver
full_name: Reimer, Oliver
last_name: Reimer
- first_name: Stefan
full_name: Abrams, Stefan
last_name: Abrams
- first_name: Fabian
full_name: Sion, Fabian
last_name: Sion
- first_name: Christian
full_name: Henke, Christian
last_name: Henke
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
- first_name: Sebastian
full_name: Schubert, Sebastian
last_name: Schubert
- first_name: Harald
full_name: Pfifer, Harald
last_name: Pfifer
citation:
ama: 'Henkenjohann M, Nolte U, Jahneke J, et al. Dynamic Wind Tunnel Testing of
an INDI-Based Flight Controller for a Tiltrotor-VTOL. In: AIAA SCITECH 2025
Forum. American Institute of Aeronautics and Astronautics; 2025. doi:10.2514/6.2025-2083'
apa: Henkenjohann, M., Nolte, U., Jahneke, J., Reimer, O., Abrams, S., Sion, F.,
Henke, C., Trächtler, A., Schubert, S., & Pfifer, H. (2025). Dynamic Wind
Tunnel Testing of an INDI-Based Flight Controller for a Tiltrotor-VTOL. AIAA
SCITECH 2025 Forum. https://doi.org/10.2514/6.2025-2083
bibtex: '@inproceedings{Henkenjohann_Nolte_Jahneke_Reimer_Abrams_Sion_Henke_Trächtler_Schubert_Pfifer_2025,
title={Dynamic Wind Tunnel Testing of an INDI-Based Flight Controller for a Tiltrotor-VTOL},
DOI={10.2514/6.2025-2083}, booktitle={AIAA
SCITECH 2025 Forum}, publisher={American Institute of Aeronautics and Astronautics},
author={Henkenjohann, Mark and Nolte, Udo and Jahneke, Julien and Reimer, Oliver
and Abrams, Stefan and Sion, Fabian and Henke, Christian and Trächtler, Ansgar
and Schubert, Sebastian and Pfifer, Harald}, year={2025} }'
chicago: Henkenjohann, Mark, Udo Nolte, Julien Jahneke, Oliver Reimer, Stefan Abrams,
Fabian Sion, Christian Henke, Ansgar Trächtler, Sebastian Schubert, and Harald
Pfifer. “Dynamic Wind Tunnel Testing of an INDI-Based Flight Controller for a
Tiltrotor-VTOL.” In AIAA SCITECH 2025 Forum. American Institute of Aeronautics
and Astronautics, 2025. https://doi.org/10.2514/6.2025-2083.
ieee: 'M. Henkenjohann et al., “Dynamic Wind Tunnel Testing of an INDI-Based
Flight Controller for a Tiltrotor-VTOL,” 2025, doi: 10.2514/6.2025-2083.'
mla: Henkenjohann, Mark, et al. “Dynamic Wind Tunnel Testing of an INDI-Based Flight
Controller for a Tiltrotor-VTOL.” AIAA SCITECH 2025 Forum, American Institute
of Aeronautics and Astronautics, 2025, doi:10.2514/6.2025-2083.
short: 'M. Henkenjohann, U. Nolte, J. Jahneke, O. Reimer, S. Abrams, F. Sion, C.
Henke, A. Trächtler, S. Schubert, H. Pfifer, in: AIAA SCITECH 2025 Forum, American
Institute of Aeronautics and Astronautics, 2025.'
date_created: 2026-01-07T15:43:24Z
date_updated: 2026-01-07T15:45:27Z
department:
- _id: '153'
- _id: '241'
doi: 10.2514/6.2025-2083
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://arc.aiaa.org/doi/10.2514/6.2025-2083
oa: '1'
publication: AIAA SCITECH 2025 Forum
publication_status: published
publisher: American Institute of Aeronautics and Astronautics
status: public
title: Dynamic Wind Tunnel Testing of an INDI-Based Flight Controller for a Tiltrotor-VTOL
type: conference
user_id: '82875'
year: '2025'
...
---
_id: '63528'
author:
- first_name: Fabian
full_name: Reiling, Fabian
last_name: Reiling
- first_name: Maximilian
full_name: Bause, Maximilian
last_name: Bause
- first_name: Stefan
full_name: Gröger, Stefan
last_name: Gröger
- first_name: Christian
full_name: Henke, Christian
last_name: Henke
- first_name: Steven
full_name: Koppert, Steven
last_name: Koppert
- first_name: Ansgar
full_name: Trächtler, Ansgar
last_name: Trächtler
citation:
ama: 'Reiling F, Bause M, Gröger S, Henke C, Koppert S, Trächtler A. Development
of a Learning-Based Control System for Robot-Assisted Grinding of Rubber Roller.
In: 2025 11th International Conference on Automation, Robotics, and Applications
(ICARA). IEEE; 2025. doi:10.1109/icara64554.2025.10977606'
apa: Reiling, F., Bause, M., Gröger, S., Henke, C., Koppert, S., & Trächtler,
A. (2025). Development of a Learning-Based Control System for Robot-Assisted Grinding
of Rubber Roller. 2025 11th International Conference on Automation, Robotics,
and Applications (ICARA). https://doi.org/10.1109/icara64554.2025.10977606
bibtex: '@inproceedings{Reiling_Bause_Gröger_Henke_Koppert_Trächtler_2025, title={Development
of a Learning-Based Control System for Robot-Assisted Grinding of Rubber Roller},
DOI={10.1109/icara64554.2025.10977606},
booktitle={2025 11th International Conference on Automation, Robotics, and Applications
(ICARA)}, publisher={IEEE}, author={Reiling, Fabian and Bause, Maximilian and
Gröger, Stefan and Henke, Christian and Koppert, Steven and Trächtler, Ansgar},
year={2025} }'
chicago: Reiling, Fabian, Maximilian Bause, Stefan Gröger, Christian Henke, Steven
Koppert, and Ansgar Trächtler. “Development of a Learning-Based Control System
for Robot-Assisted Grinding of Rubber Roller.” In 2025 11th International Conference
on Automation, Robotics, and Applications (ICARA). IEEE, 2025. https://doi.org/10.1109/icara64554.2025.10977606.
ieee: 'F. Reiling, M. Bause, S. Gröger, C. Henke, S. Koppert, and A. Trächtler,
“Development of a Learning-Based Control System for Robot-Assisted Grinding of
Rubber Roller,” 2025, doi: 10.1109/icara64554.2025.10977606.'
mla: Reiling, Fabian, et al. “Development of a Learning-Based Control System for
Robot-Assisted Grinding of Rubber Roller.” 2025 11th International Conference
on Automation, Robotics, and Applications (ICARA), IEEE, 2025, doi:10.1109/icara64554.2025.10977606.
short: 'F. Reiling, M. Bause, S. Gröger, C. Henke, S. Koppert, A. Trächtler, in:
2025 11th International Conference on Automation, Robotics, and Applications (ICARA),
IEEE, 2025.'
date_created: 2026-01-07T15:46:06Z
date_updated: 2026-01-07T15:46:51Z
department:
- _id: '153'
- _id: '241'
doi: 10.1109/icara64554.2025.10977606
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://ieeexplore.ieee.org/document/10977606
oa: '1'
publication: 2025 11th International Conference on Automation, Robotics, and Applications
(ICARA)
publication_status: published
publisher: IEEE
status: public
title: Development of a Learning-Based Control System for Robot-Assisted Grinding
of Rubber Roller
type: conference
user_id: '82875'
year: '2025'
...
---
_id: '57324'
abstract:
- lang: eng
text: Generating SPARQL queries is crucial for extracting relevant information from
diverse knowledge graphs. However, the structural and semantic differences among
these graphs necessitate training or fine-tuning a tailored model for each one.
In this paper, we propose UniQ-Gen, a unified query generation approach to generate
SPARQL queries across various knowledge graphs. UniQ-Gen integrates entity recognition,
disambiguation, and linking through a BERT-NER model and employs cross-encoder
ranking to align questions with the Freebase ontology. We conducted several experiments
on different benchmark datasets such as LC-QuAD 2.0, GrailQA, and QALD-10. The
evaluation results demonstrate that our approach achieves performance equivalent
to or better than models fine-tuned for individual knowledge graphs. This finding
suggests that fine-tuning a unified model on a heterogeneous dataset of SPARQL
queries across different knowledge graphs eliminates the need for separate models
for each graph, thereby reducing resource requirements.
author:
- first_name: Daniel
full_name: Vollmers, Daniel
last_name: Vollmers
- first_name: Nikit
full_name: Srivastava, Nikit
id: '70066'
last_name: Srivastava
orcid: 0009-0004-5164-4911
- first_name: Hamada Mohamed Abdelsamee
full_name: Zahera, Hamada Mohamed Abdelsamee
id: '72768'
last_name: Zahera
orcid: 0000-0003-0215-1278
- first_name: Diego
full_name: Moussallem, Diego
id: '71635'
last_name: Moussallem
- first_name: Axel-Cyrille
full_name: Ngonga Ngomo, Axel-Cyrille
id: '65716'
last_name: Ngonga Ngomo
citation:
ama: 'Vollmers D, Srivastava N, Zahera HMA, Moussallem D, Ngonga Ngomo A-C. UniQ-Gen:
Unified Query Generation Across Multiple Knowledge Graphs. In: Alam M, Rospocher
M, van Erp M, Hollink L, Gesese GA, eds. Knowledge Engineering and Knowledge
Management. Springer Nature Switzerland; 2025:174–189. doi:https://doi.org/10.1007/978-3-031-77792-9_11'
apa: 'Vollmers, D., Srivastava, N., Zahera, H. M. A., Moussallem, D., & Ngonga
Ngomo, A.-C. (2025). UniQ-Gen: Unified Query Generation Across Multiple Knowledge
Graphs. In M. Alam, M. Rospocher, M. van Erp, L. Hollink, & G. A. Gesese (Eds.),
Knowledge Engineering and Knowledge Management (pp. 174–189). Springer
Nature Switzerland. https://doi.org/10.1007/978-3-031-77792-9_11'
bibtex: '@inproceedings{Vollmers_Srivastava_Zahera_Moussallem_Ngonga Ngomo_2025,
place={Cham}, title={UniQ-Gen: Unified Query Generation Across Multiple Knowledge
Graphs}, DOI={https://doi.org/10.1007/978-3-031-77792-9_11},
booktitle={Knowledge Engineering and Knowledge Management}, publisher={Springer
Nature Switzerland}, author={Vollmers, Daniel and Srivastava, Nikit and Zahera,
Hamada Mohamed Abdelsamee and Moussallem, Diego and Ngonga Ngomo, Axel-Cyrille},
editor={Alam, Mehwish and Rospocher, Marco and van Erp, Marieke and Hollink, Laura
and Gesese, Genet Asefa}, year={2025}, pages={174–189} }'
chicago: 'Vollmers, Daniel, Nikit Srivastava, Hamada Mohamed Abdelsamee Zahera,
Diego Moussallem, and Axel-Cyrille Ngonga Ngomo. “UniQ-Gen: Unified Query Generation
Across Multiple Knowledge Graphs.” In Knowledge Engineering and Knowledge Management,
edited by Mehwish Alam, Marco Rospocher, Marieke van Erp, Laura Hollink, and Genet
Asefa Gesese, 174–189. Cham: Springer Nature Switzerland, 2025. https://doi.org/10.1007/978-3-031-77792-9_11.'
ieee: 'D. Vollmers, N. Srivastava, H. M. A. Zahera, D. Moussallem, and A.-C. Ngonga
Ngomo, “UniQ-Gen: Unified Query Generation Across Multiple Knowledge Graphs,”
in Knowledge Engineering and Knowledge Management, 2025, pp. 174–189, doi:
https://doi.org/10.1007/978-3-031-77792-9_11.'
mla: 'Vollmers, Daniel, et al. “UniQ-Gen: Unified Query Generation Across Multiple
Knowledge Graphs.” Knowledge Engineering and Knowledge Management, edited
by Mehwish Alam et al., Springer Nature Switzerland, 2025, pp. 174–189, doi:https://doi.org/10.1007/978-3-031-77792-9_11.'
short: 'D. Vollmers, N. Srivastava, H.M.A. Zahera, D. Moussallem, A.-C. Ngonga Ngomo,
in: M. Alam, M. Rospocher, M. van Erp, L. Hollink, G.A. Gesese (Eds.), Knowledge
Engineering and Knowledge Management, Springer Nature Switzerland, Cham, 2025,
pp. 174–189.'
date_created: 2024-11-22T12:56:54Z
date_updated: 2024-11-22T12:58:59Z
doi: https://doi.org/10.1007/978-3-031-77792-9_11
editor:
- first_name: Mehwish
full_name: Alam, Mehwish
last_name: Alam
- first_name: Marco
full_name: Rospocher, Marco
last_name: Rospocher
- first_name: Marieke
full_name: van Erp, Marieke
last_name: van Erp
- first_name: Laura
full_name: Hollink, Laura
last_name: Hollink
- first_name: Genet Asefa
full_name: Gesese, Genet Asefa
last_name: Gesese
language:
- iso: eng
page: 174–189
place: Cham
publication: Knowledge Engineering and Knowledge Management
publication_identifier:
isbn:
- 978-3-031-77792-9
publisher: Springer Nature Switzerland
status: public
title: 'UniQ-Gen: Unified Query Generation Across Multiple Knowledge Graphs'
type: conference
user_id: '70066'
year: '2025'
...
---
_id: '58133'
author:
- first_name: Sudipta
full_name: Pramanik, Sudipta
last_name: Pramanik
- first_name: Dennis
full_name: Mileaege, Dennis
last_name: Mileaege
- first_name: Anatolii
full_name: Andreiev, Anatolii
id: '50215'
last_name: Andreiev
- first_name: Kay-Peter
full_name: Hoyer, Kay-Peter
id: '48411'
last_name: Hoyer
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
citation:
ama: Pramanik S, Mileaege D, Andreiev A, Hoyer K-P, Schaper M. Effect of Compression
Rate and Pore Size Distribution on the Compression Behavior of Additively Manufactured
Bio-inspired Fe3Si Microporous Material. Journal of Materials Engineering and
Performance. Published online 2025. doi:10.1007/s11665-024-10618-z
apa: Pramanik, S., Mileaege, D., Andreiev, A., Hoyer, K.-P., & Schaper, M. (2025).
Effect of Compression Rate and Pore Size Distribution on the Compression Behavior
of Additively Manufactured Bio-inspired Fe3Si Microporous Material. Journal
of Materials Engineering and Performance. https://doi.org/10.1007/s11665-024-10618-z
bibtex: '@article{Pramanik_Mileaege_Andreiev_Hoyer_Schaper_2025, title={Effect of
Compression Rate and Pore Size Distribution on the Compression Behavior of Additively
Manufactured Bio-inspired Fe3Si Microporous Material}, DOI={10.1007/s11665-024-10618-z},
journal={Journal of Materials Engineering and Performance}, publisher={Springer
Science and Business Media LLC}, author={Pramanik, Sudipta and Mileaege, Dennis
and Andreiev, Anatolii and Hoyer, Kay-Peter and Schaper, Mirko}, year={2025} }'
chicago: Pramanik, Sudipta, Dennis Mileaege, Anatolii Andreiev, Kay-Peter Hoyer,
and Mirko Schaper. “Effect of Compression Rate and Pore Size Distribution on the
Compression Behavior of Additively Manufactured Bio-Inspired Fe3Si Microporous
Material.” Journal of Materials Engineering and Performance, 2025. https://doi.org/10.1007/s11665-024-10618-z.
ieee: 'S. Pramanik, D. Mileaege, A. Andreiev, K.-P. Hoyer, and M. Schaper, “Effect
of Compression Rate and Pore Size Distribution on the Compression Behavior of
Additively Manufactured Bio-inspired Fe3Si Microporous Material,” Journal of
Materials Engineering and Performance, 2025, doi: 10.1007/s11665-024-10618-z.'
mla: Pramanik, Sudipta, et al. “Effect of Compression Rate and Pore Size Distribution
on the Compression Behavior of Additively Manufactured Bio-Inspired Fe3Si Microporous
Material.” Journal of Materials Engineering and Performance, Springer Science
and Business Media LLC, 2025, doi:10.1007/s11665-024-10618-z.
short: S. Pramanik, D. Mileaege, A. Andreiev, K.-P. Hoyer, M. Schaper, Journal of
Materials Engineering and Performance (2025).
date_created: 2025-01-09T16:15:51Z
date_updated: 2025-01-09T16:16:52Z
department:
- _id: '9'
- _id: '158'
doi: 10.1007/s11665-024-10618-z
language:
- iso: eng
publication: Journal of Materials Engineering and Performance
publication_identifier:
issn:
- 1059-9495
- 1544-1024
publication_status: published
publisher: Springer Science and Business Media LLC
quality_controlled: '1'
status: public
title: Effect of Compression Rate and Pore Size Distribution on the Compression Behavior
of Additively Manufactured Bio-inspired Fe3Si Microporous Material
type: journal_article
user_id: '48411'
year: '2025'
...
---
_id: '58539'
author:
- first_name: Patrick
full_name: Franke, Patrick
id: '93922'
last_name: Franke
- first_name: Markus
full_name: Schubert, Markus
last_name: Schubert
- first_name: Uwe
full_name: Hampel, Uwe
last_name: Hampel
- first_name: Eugeny Y.
full_name: Kenig, Eugeny Y.
id: '665'
last_name: Kenig
citation:
ama: 'Franke P, Schubert M, Hampel U, Kenig EY. Modeling reactive absorption in
sandwich packings. In: Proceedings of the Dechema/VDI Jahrestreffen Fluidverfahrenstechnik
2025. ; 2025.'
apa: Franke, P., Schubert, M., Hampel, U., & Kenig, E. Y. (2025). Modeling reactive
absorption in sandwich packings. Proceedings of the Dechema/VDI Jahrestreffen
Fluidverfahrenstechnik 2025. Dechema/VDI Jahrestreffen Fluidverfahrenstechnik
2025, Bochum.
bibtex: '@inproceedings{Franke_Schubert_Hampel_Kenig_2025, title={Modeling reactive
absorption in sandwich packings}, booktitle={Proceedings of the Dechema/VDI Jahrestreffen
Fluidverfahrenstechnik 2025}, author={Franke, Patrick and Schubert, Markus and
Hampel, Uwe and Kenig, Eugeny Y.}, year={2025} }'
chicago: Franke, Patrick, Markus Schubert, Uwe Hampel, and Eugeny Y. Kenig. “Modeling
Reactive Absorption in Sandwich Packings.” In Proceedings of the Dechema/VDI
Jahrestreffen Fluidverfahrenstechnik 2025, 2025.
ieee: P. Franke, M. Schubert, U. Hampel, and E. Y. Kenig, “Modeling reactive absorption
in sandwich packings,” presented at the Dechema/VDI Jahrestreffen Fluidverfahrenstechnik
2025, Bochum, 2025.
mla: Franke, Patrick, et al. “Modeling Reactive Absorption in Sandwich Packings.”
Proceedings of the Dechema/VDI Jahrestreffen Fluidverfahrenstechnik 2025,
2025.
short: 'P. Franke, M. Schubert, U. Hampel, E.Y. Kenig, in: Proceedings of the Dechema/VDI
Jahrestreffen Fluidverfahrenstechnik 2025, 2025.'
conference:
end_date: 2025-02-05
location: Bochum
name: Dechema/VDI Jahrestreffen Fluidverfahrenstechnik 2025
start_date: 2025-02-03
date_created: 2025-02-07T11:34:54Z
date_updated: 2025-02-07T11:35:07Z
ddc:
- '620'
department:
- _id: '831'
file:
- access_level: closed
content_type: application/pdf
creator: frankep
date_created: 2025-02-07T11:33:55Z
date_updated: 2025-02-07T11:33:55Z
file_id: '58540'
file_name: FVT2025_Abstract_Franke.pdf
file_size: 154922
relation: main_file
success: 1
file_date_updated: 2025-02-07T11:33:55Z
has_accepted_license: '1'
language:
- iso: eng
publication: Proceedings of the Dechema/VDI Jahrestreffen Fluidverfahrenstechnik 2025
status: public
title: Modeling reactive absorption in sandwich packings
type: conference_abstract
user_id: '93922'
year: '2025'
...
---
_id: '58616'
author:
- first_name: Tassja
full_name: Weber, Tassja
id: '89571'
last_name: Weber
- first_name: Sabine
full_name: Kober, Sabine
last_name: Kober
- first_name: Carmen
full_name: Lewa, Carmen
last_name: Lewa
- first_name: Elisabeth
full_name: Scherer, Elisabeth
last_name: Scherer
- first_name: Sarah
full_name: Schotemeier, Sarah
last_name: Schotemeier
citation:
ama: 'Weber T, Kober S, Lewa C, Scherer E, Schotemeier S. Eine Kultur des Teilens
hochschulübergreifend durch OER voranbringen. In: Mrohs L, Franz J, Herrmann D,
Lindner K, Staake T, eds. Digitales Lehren und Lernen an der Hochschule. Strategien
- Bedingungen - Umsetzung. transcript Verlag; 2025:47-54. doi:https://doi.org/10.14361/9783839471203'
apa: Weber, T., Kober, S., Lewa, C., Scherer, E., & Schotemeier, S. (2025).
Eine Kultur des Teilens hochschulübergreifend durch OER voranbringen. In L. Mrohs,
J. Franz, D. Herrmann, K. Lindner, & T. Staake (Eds.), Digitales Lehren
und Lernen an der Hochschule. Strategien - Bedingungen - Umsetzung (pp. 47–54).
transcript Verlag. https://doi.org/10.14361/9783839471203
bibtex: '@inbook{Weber_Kober_Lewa_Scherer_Schotemeier_2025, place={Bielefeld}, title={Eine
Kultur des Teilens hochschulübergreifend durch OER voranbringen}, DOI={https://doi.org/10.14361/9783839471203},
booktitle={Digitales Lehren und Lernen an der Hochschule. Strategien - Bedingungen
- Umsetzung}, publisher={transcript Verlag}, author={Weber, Tassja and Kober,
Sabine and Lewa, Carmen and Scherer, Elisabeth and Schotemeier, Sarah}, editor={Mrohs,
Lorenz and Franz, Julia and Herrmann, Dominik and Lindner, Konstantin and Staake,
Thorsten}, year={2025}, pages={47–54} }'
chicago: 'Weber, Tassja, Sabine Kober, Carmen Lewa, Elisabeth Scherer, and Sarah
Schotemeier. “Eine Kultur des Teilens hochschulübergreifend durch OER voranbringen.”
In Digitales Lehren und Lernen an der Hochschule. Strategien - Bedingungen
- Umsetzung, edited by Lorenz Mrohs, Julia Franz, Dominik Herrmann, Konstantin
Lindner, and Thorsten Staake, 47–54. Bielefeld: transcript Verlag, 2025. https://doi.org/10.14361/9783839471203.'
ieee: 'T. Weber, S. Kober, C. Lewa, E. Scherer, and S. Schotemeier, “Eine Kultur
des Teilens hochschulübergreifend durch OER voranbringen,” in Digitales Lehren
und Lernen an der Hochschule. Strategien - Bedingungen - Umsetzung, L. Mrohs,
J. Franz, D. Herrmann, K. Lindner, and T. Staake, Eds. Bielefeld: transcript Verlag,
2025, pp. 47–54.'
mla: Weber, Tassja, et al. “Eine Kultur des Teilens hochschulübergreifend durch
OER voranbringen.” Digitales Lehren und Lernen an der Hochschule. Strategien
- Bedingungen - Umsetzung, edited by Lorenz Mrohs et al., transcript Verlag,
2025, pp. 47–54, doi:https://doi.org/10.14361/9783839471203.
short: 'T. Weber, S. Kober, C. Lewa, E. Scherer, S. Schotemeier, in: L. Mrohs, J.
Franz, D. Herrmann, K. Lindner, T. Staake (Eds.), Digitales Lehren und Lernen
an der Hochschule. Strategien - Bedingungen - Umsetzung, transcript Verlag, Bielefeld,
2025, pp. 47–54.'
date_created: 2025-02-12T15:04:01Z
date_updated: 2025-02-12T15:10:27Z
doi: https://doi.org/10.14361/9783839471203
editor:
- first_name: Lorenz
full_name: Mrohs, Lorenz
last_name: Mrohs
- first_name: Julia
full_name: Franz, Julia
last_name: Franz
- first_name: Dominik
full_name: Herrmann, Dominik
last_name: Herrmann
- first_name: Konstantin
full_name: Lindner, Konstantin
last_name: Lindner
- first_name: Thorsten
full_name: Staake, Thorsten
last_name: Staake
language:
- iso: ger
main_file_link:
- open_access: '1'
url: https://www.transcript-verlag.de/978-3-8376-7120-9/digitales-lehren-und-lernen-an-der-hochschule/?number=978-3-8394-7120-3
oa: '1'
page: 47-54
place: Bielefeld
publication: Digitales Lehren und Lernen an der Hochschule. Strategien - Bedingungen
- Umsetzung
publication_identifier:
isbn:
- 978-3-8376-7120-9
publication_status: published
publisher: transcript Verlag
status: public
title: Eine Kultur des Teilens hochschulübergreifend durch OER voranbringen
type: book_chapter
user_id: '89571'
year: '2025'
...
---
_id: '58618'
author:
- first_name: Lukas
full_name: Maier, Lukas
last_name: Maier
- first_name: Janis
full_name: Beimdiek, Janis
id: '45788'
last_name: Beimdiek
orcid: 0009-0001-1348-496X
citation:
ama: Maier L, Beimdiek J. Untersuchung Der Eignung von Eisen-/Mangan-Oxiden Aus
Einer Sprayflammensynthese Für Die SCR.; 2025.
apa: Maier, L., & Beimdiek, J. (2025). Untersuchung der Eignung von Eisen-/Mangan-Oxiden
aus einer Sprayflammensynthese für die SCR.
bibtex: '@book{Maier_Beimdiek_2025, place={Paderborn}, title={Untersuchung der Eignung
von Eisen-/Mangan-Oxiden aus einer Sprayflammensynthese für die SCR}, author={Maier,
Lukas and Beimdiek, Janis}, year={2025} }'
chicago: Maier, Lukas, and Janis Beimdiek. Untersuchung Der Eignung von Eisen-/Mangan-Oxiden
Aus Einer Sprayflammensynthese Für Die SCR. Paderborn, 2025.
ieee: L. Maier and J. Beimdiek, Untersuchung der Eignung von Eisen-/Mangan-Oxiden
aus einer Sprayflammensynthese für die SCR. Paderborn, 2025.
mla: Maier, Lukas, and Janis Beimdiek. Untersuchung Der Eignung von Eisen-/Mangan-Oxiden
Aus Einer Sprayflammensynthese Für Die SCR. 2025.
short: L. Maier, J. Beimdiek, Untersuchung Der Eignung von Eisen-/Mangan-Oxiden
Aus Einer Sprayflammensynthese Für Die SCR, Paderborn, 2025.
date_created: 2025-02-13T10:26:03Z
date_updated: 2025-02-13T10:26:21Z
department:
- _id: '9'
- _id: '150'
language:
- iso: eng
place: Paderborn
status: public
supervisor:
- first_name: Janis
full_name: Beimdiek, Janis
id: '45788'
last_name: Beimdiek
orcid: 0009-0001-1348-496X
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
id: '464'
last_name: Schmid
orcid: 000-0001-8590-1921
- first_name: Sascha
full_name: Schiller, Sascha
last_name: Schiller
title: Untersuchung der Eignung von Eisen-/Mangan-Oxiden aus einer Sprayflammensynthese
für die SCR
type: bachelorsthesis
user_id: '45788'
year: '2025'
...
---
_id: '58076'
abstract:
- lang: eng
text: This paper presents the concept of Information Circularity Assistance, which
provides decision support in the early stages of product creation for Circular
Economy. Engineers in strategic product planning need to proactively predict the
quantity, quality, and timing of secondary materials and returned components.
For example, products with high recycled content will only be economically sustainable
if the material is actually available in the future product life. Our assumption
is that Information Circularity Assistance enables decision makers to incorporate
insights from extreme data – high-volume, high-velocity, heterogeneous and distributed
data from the product life – into product creation through intelligent Digital
Twins. Artificial Intelligence can help to derive sustainable actions in favor
of circular products by processing extreme data and enriching it with expert knowledge.
The research contributes in three key dimensions. First, a comprehensive literature
review is conducted. This review covers concepts of intelligence in Scenario-Technique
for strategic product planning, Digital Twin-based analysis of extreme data and
relevant technologies from Data Science and Artificial Intelligence. In all areas,
the state of the art and emerging trends are identified. Secondly, the study identifies
information needs along the steps of the Scenario-Technique and information offerings
based on Digital Twins. The concept of Information Circularity Assistance results
from the coupling of these demands and offerings, extending the Scenario-Technique
beyond traditional expert-based methods. Third, we extend existing Digital Twin
methods used in circularity and discuss the deployment of Data Science and Artificial
Intelligence algorithms within the product creation process. Our approach uses
extreme data to provide a strategic advantage in optimizing product life cycle
planning, which is illustrated by two sample applications. The aim is to provide
Information Circularity Assistance that will support experienced product planners,
developers, and decision makers in the future.
alternative_title:
- Utilizing Artificial Intelligence, Scenario-Technique and Digital Twins to solve
challenges of product creation for Circular Economy
article_type: original
author:
- first_name: Iris
full_name: Gräßler, Iris
id: '47565'
last_name: Gräßler
orcid: 0000-0001-5765-971X
- first_name: Michael
full_name: Weyrich, Michael
last_name: Weyrich
- first_name: Jens
full_name: Pottebaum, Jens
id: '405'
last_name: Pottebaum
orcid: http://orcid.org/0000-0001-8778-2989
- first_name: Simon
full_name: Kamm, Simon
last_name: Kamm
citation:
ama: Gräßler I, Weyrich M, Pottebaum J, Kamm S. Information Circularity Assistance
based on extreme data. at - Automatisierungstechnik. 2025;73(1):3-21. doi:10.1515/auto-2024-0039
apa: Gräßler, I., Weyrich, M., Pottebaum, J., & Kamm, S. (2025). Information
Circularity Assistance based on extreme data. At - Automatisierungstechnik,
73(1), 3–21. https://doi.org/10.1515/auto-2024-0039
bibtex: '@article{Gräßler_Weyrich_Pottebaum_Kamm_2025, title={Information Circularity
Assistance based on extreme data}, volume={73}, DOI={10.1515/auto-2024-0039},
number={1}, journal={at - Automatisierungstechnik}, publisher={Walter de Gruyter
GmbH}, author={Gräßler, Iris and Weyrich, Michael and Pottebaum, Jens and Kamm,
Simon}, year={2025}, pages={3–21} }'
chicago: 'Gräßler, Iris, Michael Weyrich, Jens Pottebaum, and Simon Kamm. “Information
Circularity Assistance Based on Extreme Data.” At - Automatisierungstechnik
73, no. 1 (2025): 3–21. https://doi.org/10.1515/auto-2024-0039.'
ieee: 'I. Gräßler, M. Weyrich, J. Pottebaum, and S. Kamm, “Information Circularity
Assistance based on extreme data,” at - Automatisierungstechnik, vol. 73,
no. 1, pp. 3–21, 2025, doi: 10.1515/auto-2024-0039.'
mla: Gräßler, Iris, et al. “Information Circularity Assistance Based on Extreme
Data.” At - Automatisierungstechnik, vol. 73, no. 1, Walter de Gruyter
GmbH, 2025, pp. 3–21, doi:10.1515/auto-2024-0039.
short: I. Gräßler, M. Weyrich, J. Pottebaum, S. Kamm, At - Automatisierungstechnik
73 (2025) 3–21.
date_created: 2025-01-07T13:30:45Z
date_updated: 2025-02-15T09:41:54Z
department:
- _id: '152'
doi: 10.1515/auto-2024-0039
intvolume: ' 73'
issue: '1'
keyword:
- Scenario-Technique
- Artificial Intelligence
- Digital Twin
- Large Language Models
language:
- iso: eng
main_file_link:
- open_access: '1'
oa: '1'
page: 3-21
publication: at - Automatisierungstechnik
publication_identifier:
issn:
- 0178-2312
- 2196-677X
publication_status: published
publisher: Walter de Gruyter GmbH
quality_controlled: '1'
status: public
title: Information Circularity Assistance based on extreme data
type: journal_article
user_id: '405'
volume: 73
year: '2025'
...
---
_id: '58650'
abstract:
- lang: eng
text: 'Technical systems are characterized by increasing interdisciplinarity, complexity
and networking. A product and its corresponding production systems require interdisciplinary
multi-objective optimization. Sustainability and recyclability demands increase
said complexity. The efficiency of previously established engineering methods
is reaching its limits, which can only be overcome by systematic integration of
extreme data. The aim of "hybrid decision support" is as follows: Data science
and artificial intelligence should be used to supplement human capabilities in
conjunction with existing heuristics, methods, modeling and simulation to increase
the efficiency of product creation.'
alternative_title:
- Hybride Entscheidungsunterstützung in der Produktentstehung - Mit Data Science und
Künstlicher Intelligenz die Leistungsfähigkeit erhöhen
article_type: original
author:
- first_name: Iris
full_name: Gräßler, Iris
id: '47565'
last_name: Gräßler
orcid: 0000-0001-5765-971X
- first_name: Jens
full_name: Pottebaum, Jens
id: '405'
last_name: Pottebaum
orcid: http://orcid.org/0000-0001-8778-2989
- first_name: Peter
full_name: Nyhuis, Peter
last_name: Nyhuis
- first_name: Rainer
full_name: Stark, Rainer
last_name: Stark
- first_name: Klaus-Dieter
full_name: Thoben, Klaus-Dieter
last_name: Thoben
- first_name: Petra
full_name: Wiederkehr, Petra
last_name: Wiederkehr
citation:
ama: Gräßler I, Pottebaum J, Nyhuis P, Stark R, Thoben K-D, Wiederkehr P. Hybrid
Decision Support in Product Creation - Improving performance with data science
and artificial intelligence. Industry 40 Science. 2025;2025(1). doi:10.30844/i4sd.25.1.18
apa: Gräßler, I., Pottebaum, J., Nyhuis, P., Stark, R., Thoben, K.-D., & Wiederkehr,
P. (2025). Hybrid Decision Support in Product Creation - Improving performance
with data science and artificial intelligence. Industry 4.0 Science, 2025(1).
https://doi.org/10.30844/i4sd.25.1.18
bibtex: '@article{Gräßler_Pottebaum_Nyhuis_Stark_Thoben_Wiederkehr_2025, title={Hybrid
Decision Support in Product Creation - Improving performance with data science
and artificial intelligence}, volume={2025}, DOI={10.30844/i4sd.25.1.18},
number={1}, journal={Industry 4.0 Science}, publisher={GITO mbH Verlag}, author={Gräßler,
Iris and Pottebaum, Jens and Nyhuis, Peter and Stark, Rainer and Thoben, Klaus-Dieter
and Wiederkehr, Petra}, year={2025} }'
chicago: Gräßler, Iris, Jens Pottebaum, Peter Nyhuis, Rainer Stark, Klaus-Dieter
Thoben, and Petra Wiederkehr. “Hybrid Decision Support in Product Creation - Improving
Performance with Data Science and Artificial Intelligence.” Industry 4.0 Science
2025, no. 1 (2025). https://doi.org/10.30844/i4sd.25.1.18.
ieee: 'I. Gräßler, J. Pottebaum, P. Nyhuis, R. Stark, K.-D. Thoben, and P. Wiederkehr,
“Hybrid Decision Support in Product Creation - Improving performance with data
science and artificial intelligence,” Industry 4.0 Science, vol. 2025,
no. 1, 2025, doi: 10.30844/i4sd.25.1.18.'
mla: Gräßler, Iris, et al. “Hybrid Decision Support in Product Creation - Improving
Performance with Data Science and Artificial Intelligence.” Industry 4.0 Science,
vol. 2025, no. 1, GITO mbH Verlag, 2025, doi:10.30844/i4sd.25.1.18.
short: I. Gräßler, J. Pottebaum, P. Nyhuis, R. Stark, K.-D. Thoben, P. Wiederkehr,
Industry 4.0 Science 2025 (2025).
date_created: 2025-02-15T09:31:30Z
date_updated: 2025-02-15T09:40:52Z
department:
- _id: '152'
doi: 10.30844/i4sd.25.1.18
intvolume: ' 2025'
issue: '1'
keyword:
- AI
- artificial intelligence
- Data Science
- decision support
- extreme data
- Künstliche Intelligenz
- product creation
- product development
language:
- iso: eng
main_file_link:
- open_access: '1'
oa: '1'
publication: Industry 4.0 Science
publication_identifier:
issn:
- 2942-6170
publication_status: published
publisher: GITO mbH Verlag
quality_controlled: '1'
status: public
title: Hybrid Decision Support in Product Creation - Improving performance with data
science and artificial intelligence
type: journal_article
user_id: '405'
volume: 2025
year: '2025'
...
---
_id: '58672'
article_number: '103960'
author:
- first_name: Mohamad
full_name: Al Trjman, Mohamad
id: '65415'
last_name: Al Trjman
- first_name: Alexander Heinrich Johannes
full_name: Salten, Alexander Heinrich Johannes
id: '59551'
last_name: Salten
orcid: 0000-0003-3069-9601
- first_name: Felix
full_name: Beule, Felix
id: '66192'
last_name: Beule
- first_name: Dominik
full_name: Teutenberg, Dominik
id: '537'
last_name: Teutenberg
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: Julia
full_name: Riese, Julia
id: '101499'
last_name: Riese
orcid: 0000-0002-3053-0534
- first_name: Eugeny
full_name: Kenig, Eugeny
id: '665'
last_name: Kenig
citation:
ama: Al Trjman M, Salten AHJ, Beule F, et al. Viscous fingering in adhesive bonding.
International Journal of Adhesion and Adhesives. 2025;139. doi:10.1016/j.ijadhadh.2025.103960
apa: Al Trjman, M., Salten, A. H. J., Beule, F., Teutenberg, D., Meschut, G., Riese,
J., & Kenig, E. (2025). Viscous fingering in adhesive bonding. International
Journal of Adhesion and Adhesives, 139, Article 103960. https://doi.org/10.1016/j.ijadhadh.2025.103960
bibtex: '@article{Al Trjman_Salten_Beule_Teutenberg_Meschut_Riese_Kenig_2025, title={Viscous
fingering in adhesive bonding}, volume={139}, DOI={10.1016/j.ijadhadh.2025.103960},
number={103960}, journal={International Journal of Adhesion and Adhesives}, publisher={Elsevier
BV}, author={Al Trjman, Mohamad and Salten, Alexander Heinrich Johannes and Beule,
Felix and Teutenberg, Dominik and Meschut, Gerson and Riese, Julia and Kenig,
Eugeny}, year={2025} }'
chicago: Al Trjman, Mohamad, Alexander Heinrich Johannes Salten, Felix Beule, Dominik
Teutenberg, Gerson Meschut, Julia Riese, and Eugeny Kenig. “Viscous Fingering
in Adhesive Bonding.” International Journal of Adhesion and Adhesives 139
(2025). https://doi.org/10.1016/j.ijadhadh.2025.103960.
ieee: 'M. Al Trjman et al., “Viscous fingering in adhesive bonding,” International
Journal of Adhesion and Adhesives, vol. 139, Art. no. 103960, 2025, doi: 10.1016/j.ijadhadh.2025.103960.'
mla: Al Trjman, Mohamad, et al. “Viscous Fingering in Adhesive Bonding.” International
Journal of Adhesion and Adhesives, vol. 139, 103960, Elsevier BV, 2025, doi:10.1016/j.ijadhadh.2025.103960.
short: M. Al Trjman, A.H.J. Salten, F. Beule, D. Teutenberg, G. Meschut, J. Riese,
E. Kenig, International Journal of Adhesion and Adhesives 139 (2025).
date_created: 2025-02-17T19:39:31Z
date_updated: 2025-02-21T12:10:51Z
department:
- _id: '9'
- _id: '831'
doi: 10.1016/j.ijadhadh.2025.103960
intvolume: ' 139'
language:
- iso: eng
publication: International Journal of Adhesion and Adhesives
publication_identifier:
issn:
- 0143-7496
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: Viscous fingering in adhesive bonding
type: journal_article
user_id: '101499'
volume: 139
year: '2025'
...
---
_id: '58759'
article_number: '121317'
author:
- first_name: Christopher
full_name: Dechert, Christopher
last_name: Dechert
- first_name: Eugeny Y.
full_name: Kenig, Eugeny Y.
last_name: Kenig
citation:
ama: 'Dechert C, Kenig EY. Influence of microstructures on liquid spreading on inclined
plates: A CFD based study. Chemical Engineering Science. Published online
2025. doi:10.1016/j.ces.2025.121317'
apa: 'Dechert, C., & Kenig, E. Y. (2025). Influence of microstructures on liquid
spreading on inclined plates: A CFD based study. Chemical Engineering Science,
Article 121317. https://doi.org/10.1016/j.ces.2025.121317'
bibtex: '@article{Dechert_Kenig_2025, title={Influence of microstructures on liquid
spreading on inclined plates: A CFD based study}, DOI={10.1016/j.ces.2025.121317},
number={121317}, journal={Chemical Engineering Science}, publisher={Elsevier BV},
author={Dechert, Christopher and Kenig, Eugeny Y.}, year={2025} }'
chicago: 'Dechert, Christopher, and Eugeny Y. Kenig. “Influence of Microstructures
on Liquid Spreading on Inclined Plates: A CFD Based Study.” Chemical Engineering
Science, 2025. https://doi.org/10.1016/j.ces.2025.121317.'
ieee: 'C. Dechert and E. Y. Kenig, “Influence of microstructures on liquid spreading
on inclined plates: A CFD based study,” Chemical Engineering Science, Art.
no. 121317, 2025, doi: 10.1016/j.ces.2025.121317.'
mla: 'Dechert, Christopher, and Eugeny Y. Kenig. “Influence of Microstructures on
Liquid Spreading on Inclined Plates: A CFD Based Study.” Chemical Engineering
Science, 121317, Elsevier BV, 2025, doi:10.1016/j.ces.2025.121317.'
short: C. Dechert, E.Y. Kenig, Chemical Engineering Science (2025).
date_created: 2025-02-21T12:23:00Z
date_updated: 2025-02-21T12:32:19Z
department:
- _id: '831'
doi: 10.1016/j.ces.2025.121317
extern: '1'
language:
- iso: eng
main_file_link:
- open_access: '1'
oa: '1'
project:
- _id: '52'
name: 'PC2: Computing Resources Provided by the Paderborn Center for Parallel Computing'
publication: Chemical Engineering Science
publication_identifier:
issn:
- 0009-2509
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
related_material:
link:
- relation: confirmation
url: https://doi.org/10.1016/j.ces.2025.121317
status: public
title: 'Influence of microstructures on liquid spreading on inclined plates: A CFD
based study'
type: journal_article
user_id: '69828'
year: '2025'
...
---
_id: '58761'
author:
- first_name: Christopher
full_name: Dechert, Christopher
id: '69828'
last_name: Dechert
- first_name: Julia
full_name: Riese, Julia
id: '101499'
last_name: Riese
orcid: 0000-0002-3053-0534
- first_name: Patrick
full_name: Franke, Patrick
id: '93922'
last_name: Franke
citation:
ama: 'Dechert C, Riese J, Franke P. Untersuchung zur Vergleichbarkeit von verschiedenen
Methoden zur Bestimmung der effektiven Phasengrenzflächen. In: ; 2025.'
apa: Dechert, C., Riese, J., & Franke, P. (2025). Untersuchung zur Vergleichbarkeit
von verschiedenen Methoden zur Bestimmung der effektiven Phasengrenzflächen.
Jahrestagung der Fachgruppe FLuidverfahrenstechnik, Bochum.
bibtex: '@inproceedings{Dechert_Riese_Franke_2025, title={Untersuchung zur Vergleichbarkeit
von verschiedenen Methoden zur Bestimmung der effektiven Phasengrenzflächen},
author={Dechert, Christopher and Riese, Julia and Franke, Patrick}, year={2025}
}'
chicago: Dechert, Christopher, Julia Riese, and Patrick Franke. “Untersuchung Zur
Vergleichbarkeit von Verschiedenen Methoden Zur Bestimmung Der Effektiven Phasengrenzflächen,”
2025.
ieee: C. Dechert, J. Riese, and P. Franke, “Untersuchung zur Vergleichbarkeit von
verschiedenen Methoden zur Bestimmung der effektiven Phasengrenzflächen,” presented
at the Jahrestagung der Fachgruppe FLuidverfahrenstechnik, Bochum, 2025.
mla: Dechert, Christopher, et al. Untersuchung Zur Vergleichbarkeit von Verschiedenen
Methoden Zur Bestimmung Der Effektiven Phasengrenzflächen. 2025.
short: 'C. Dechert, J. Riese, P. Franke, in: 2025.'
conference:
end_date: 2025-02-05
location: Bochum
name: Jahrestagung der Fachgruppe FLuidverfahrenstechnik
start_date: 2025-02-03
date_created: 2025-02-21T12:36:20Z
date_updated: 2025-02-21T12:38:25Z
department:
- _id: '831'
extern: '1'
language:
- iso: eng
project:
- _id: '52'
name: 'PC2: Computing Resources Provided by the Paderborn Center for Parallel Computing'
status: public
title: Untersuchung zur Vergleichbarkeit von verschiedenen Methoden zur Bestimmung
der effektiven Phasengrenzflächen
type: conference_abstract
user_id: '69828'
year: '2025'
...
---
_id: '58762'
author:
- first_name: Christopher
full_name: Dechert, Christopher
id: '69828'
last_name: Dechert
- first_name: Julia
full_name: Riese, Julia
id: '101499'
last_name: Riese
orcid: 0000-0002-3053-0534
citation:
ama: 'Dechert C, Riese J. Bewertung des Potentiales der Elektrobenetzung für Trennkolonnen.
In: ; 2025.'
apa: Dechert, C., & Riese, J. (2025). Bewertung des Potentiales der Elektrobenetzung
für Trennkolonnen. Jahrestreffen der Fachgruppe Fluidverfahrenstechnik, Bochum.
bibtex: '@inproceedings{Dechert_Riese_2025, title={Bewertung des Potentiales der
Elektrobenetzung für Trennkolonnen}, author={Dechert, Christopher and Riese, Julia},
year={2025} }'
chicago: Dechert, Christopher, and Julia Riese. “Bewertung Des Potentiales Der Elektrobenetzung
Für Trennkolonnen,” 2025.
ieee: C. Dechert and J. Riese, “Bewertung des Potentiales der Elektrobenetzung für
Trennkolonnen,” presented at the Jahrestreffen der Fachgruppe Fluidverfahrenstechnik,
Bochum, 2025.
mla: Dechert, Christopher, and Julia Riese. Bewertung Des Potentiales Der Elektrobenetzung
Für Trennkolonnen. 2025.
short: 'C. Dechert, J. Riese, in: 2025.'
conference:
end_date: 2025-02-05
location: Bochum
name: Jahrestreffen der Fachgruppe Fluidverfahrenstechnik
start_date: 2025-02-03
date_created: 2025-02-21T12:38:03Z
date_updated: 2025-02-21T12:38:28Z
department:
- _id: '831'
language:
- iso: eng
status: public
title: Bewertung des Potentiales der Elektrobenetzung für Trennkolonnen
type: conference_abstract
user_id: '69828'
year: '2025'
...
---
_id: '58535'
author:
- first_name: Keke
full_name: Yang, Keke
id: '65085'
last_name: Yang
orcid: 0000-0001-9201-9304
- first_name: Zhuoqun
full_name: Wang, Zhuoqun
last_name: Wang
- first_name: Viktor
full_name: Haak, Viktor
id: '60398'
last_name: Haak
- first_name: Viktoria
full_name: Olfert, Viktoria
id: '5974'
last_name: Olfert
- first_name: Bassel
full_name: El-Sari, Bassel
last_name: El-Sari
- first_name: David
full_name: Hein, David
id: '7728'
last_name: Hein
- first_name: Max
full_name: Biegler, Max
last_name: Biegler
- first_name: Michael
full_name: Rethmeier, Michael
last_name: Rethmeier
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: Yang K, Wang Z, Haak V, et al. A novel welding schedule for expanding the expulsion-free
process window in resistance spot welding of dissimilar joints with ultra-high
strength steel. Journal of Manufacturing Processes. 2025;137:306-319. doi:10.1016/j.jmapro.2025.02.009
apa: Yang, K., Wang, Z., Haak, V., Olfert, V., El-Sari, B., Hein, D., Biegler, M.,
Rethmeier, M., & Meschut, G. (2025). A novel welding schedule for expanding
the expulsion-free process window in resistance spot welding of dissimilar joints
with ultra-high strength steel. Journal of Manufacturing Processes, 137,
306–319. https://doi.org/10.1016/j.jmapro.2025.02.009
bibtex: '@article{Yang_Wang_Haak_Olfert_El-Sari_Hein_Biegler_Rethmeier_Meschut_2025,
title={A novel welding schedule for expanding the expulsion-free process window
in resistance spot welding of dissimilar joints with ultra-high strength steel},
volume={137}, DOI={10.1016/j.jmapro.2025.02.009},
journal={Journal of Manufacturing Processes}, publisher={Elsevier BV}, author={Yang,
Keke and Wang, Zhuoqun and Haak, Viktor and Olfert, Viktoria and El-Sari, Bassel
and Hein, David and Biegler, Max and Rethmeier, Michael and Meschut, Gerson},
year={2025}, pages={306–319} }'
chicago: 'Yang, Keke, Zhuoqun Wang, Viktor Haak, Viktoria Olfert, Bassel El-Sari,
David Hein, Max Biegler, Michael Rethmeier, and Gerson Meschut. “A Novel Welding
Schedule for Expanding the Expulsion-Free Process Window in Resistance Spot Welding
of Dissimilar Joints with Ultra-High Strength Steel.” Journal of Manufacturing
Processes 137 (2025): 306–19. https://doi.org/10.1016/j.jmapro.2025.02.009.'
ieee: 'K. Yang et al., “A novel welding schedule for expanding the expulsion-free
process window in resistance spot welding of dissimilar joints with ultra-high
strength steel,” Journal of Manufacturing Processes, vol. 137, pp. 306–319,
2025, doi: 10.1016/j.jmapro.2025.02.009.'
mla: Yang, Keke, et al. “A Novel Welding Schedule for Expanding the Expulsion-Free
Process Window in Resistance Spot Welding of Dissimilar Joints with Ultra-High
Strength Steel.” Journal of Manufacturing Processes, vol. 137, Elsevier
BV, 2025, pp. 306–19, doi:10.1016/j.jmapro.2025.02.009.
short: K. Yang, Z. Wang, V. Haak, V. Olfert, B. El-Sari, D. Hein, M. Biegler, M.
Rethmeier, G. Meschut, Journal of Manufacturing Processes 137 (2025) 306–319.
date_created: 2025-02-07T10:08:08Z
date_updated: 2025-02-24T07:30:23Z
ddc:
- '670'
department:
- _id: '157'
doi: 10.1016/j.jmapro.2025.02.009
file:
- access_level: closed
content_type: application/pdf
creator: kekeyang
date_created: 2025-02-07T10:09:17Z
date_updated: 2025-02-07T10:09:17Z
file_id: '58536'
file_name: KYA_VÖ6.pdf
file_size: 3747516
relation: main_file
success: 1
file_date_updated: 2025-02-07T10:09:17Z
has_accepted_license: '1'
intvolume: ' 137'
language:
- iso: eng
main_file_link:
- open_access: '1'
oa: '1'
page: 306-319
publication: Journal of Manufacturing Processes
publication_identifier:
issn:
- 1526-6125
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: A novel welding schedule for expanding the expulsion-free process window in
resistance spot welding of dissimilar joints with ultra-high strength steel
type: journal_article
user_id: '65085'
volume: 137
year: '2025'
...
---
_id: '58556'
abstract:
- lang: eng
text: 'To predict and prevent uneven tire wear in addition to a reduction of overall
tire wear, it is essential to estimate not only the total amount of wear but also
how the wear is distributed across the tire width. This requires knowledge of
the frictional power distribution in the tire contact patch, which is the basis
for calculating tire wear using a wear law. Usually, only 3D structural tire models
can generate such distributed contact results. However, they involve high computational
costs and cannot be used for comprehensive optimization of a vehicle’s suspension
system with respect to tire wear characteristics. Hence, this contribution presents
a methodology on how to accelerate the prediction of the frictional power distribution
using two components: The structural tire model is replaced by an empirical tire
model that on its own is not able to generate distributed contact results. Therefore,
an artificial neural network is trained to predict the desired contact results
from the kinematic quantities calculated by the empirical tire model. In the initial
training phase, both components are fitted to data generated by the original complex
tire model. After training, the empirical tire model can replace the structural
tire model in vehicle simulations, resulting in significantly shorter calculation
times. The simulation results are fed into the artificial neural network, which
predicts the frictional power distributions over the tire width with negligible
additional effort. Overall, the methodology reduces calculation time for the prediction
of tire wear based on virtual test drives to approximately 25% of the time needed
when using structural tire models.'
article_type: original
author:
- first_name: Lars
full_name: Muth, Lars
id: '77313'
last_name: Muth
orcid: 0000-0002-2938-5616
- first_name: Raphael
full_name: Zharia, Raphael
last_name: Zharia
- first_name: Hürkan
full_name: Sahin, Hürkan
last_name: Sahin
- first_name: Walter
full_name: Sextro, Walter
id: '21220'
last_name: Sextro
citation:
ama: Muth L, Zharia R, Sahin H, Sextro W. Prediction of the Frictional Power Distribution
in the Tire Contact Patch Based on an Empirical Tire Model and an Artificial Neural
Network. Tire Science and Technology. Published online 2025. doi:https://doi.org/10.2346/TST-24-009
apa: Muth, L., Zharia, R., Sahin, H., & Sextro, W. (2025). Prediction of the
Frictional Power Distribution in the Tire Contact Patch Based on an Empirical
Tire Model and an Artificial Neural Network. Tire Science and Technology.
https://doi.org/10.2346/TST-24-009
bibtex: '@article{Muth_Zharia_Sahin_Sextro_2025, title={Prediction of the Frictional
Power Distribution in the Tire Contact Patch Based on an Empirical Tire Model
and an Artificial Neural Network}, DOI={https://doi.org/10.2346/TST-24-009},
journal={Tire Science and Technology}, publisher={The Tire Society}, author={Muth,
Lars and Zharia, Raphael and Sahin, Hürkan and Sextro, Walter}, year={2025} }'
chicago: Muth, Lars, Raphael Zharia, Hürkan Sahin, and Walter Sextro. “Prediction
of the Frictional Power Distribution in the Tire Contact Patch Based on an Empirical
Tire Model and an Artificial Neural Network.” Tire Science and Technology,
2025. https://doi.org/10.2346/TST-24-009.
ieee: 'L. Muth, R. Zharia, H. Sahin, and W. Sextro, “Prediction of the Frictional
Power Distribution in the Tire Contact Patch Based on an Empirical Tire Model
and an Artificial Neural Network,” Tire Science and Technology, 2025, doi:
https://doi.org/10.2346/TST-24-009.'
mla: Muth, Lars, et al. “Prediction of the Frictional Power Distribution in the
Tire Contact Patch Based on an Empirical Tire Model and an Artificial Neural Network.”
Tire Science and Technology, The Tire Society, 2025, doi:https://doi.org/10.2346/TST-24-009.
short: L. Muth, R. Zharia, H. Sahin, W. Sextro, Tire Science and Technology (2025).
date_created: 2025-02-10T19:54:28Z
date_updated: 2025-02-27T19:53:09Z
department:
- _id: '151'
- _id: '9'
doi: https://doi.org/10.2346/TST-24-009
extern: '1'
language:
- iso: eng
publication: Tire Science and Technology
publication_status: epub_ahead
publisher: The Tire Society
quality_controlled: '1'
status: public
title: Prediction of the Frictional Power Distribution in the Tire Contact Patch Based
on an Empirical Tire Model and an Artificial Neural Network
type: journal_article
user_id: '77313'
year: '2025'
...
---
_id: '58165'
article_number: '131436'
author:
- first_name: Maximilian
full_name: Neumann, Maximilian
last_name: Neumann
- first_name: Marc
full_name: Xia, Marc
last_name: Xia
- first_name: René
full_name: Pöschmann, René
last_name: Pöschmann
- first_name: Amelie
full_name: Merkel, Amelie
last_name: Merkel
- first_name: Rolf
full_name: Staud, Rolf
last_name: Staud
- first_name: Hannes
full_name: Schneider, Hannes
last_name: Schneider
- first_name: Thomas
full_name: Ehlert, Thomas
id: '47151'
last_name: Ehlert
- first_name: Jürgen
full_name: Paschold, Jürgen
last_name: Paschold
- first_name: Steffen
full_name: Müller, Steffen
last_name: Müller
- first_name: Laura-Selin
full_name: Harding, Laura-Selin
last_name: Harding
- first_name: Johannes
full_name: Neukäufer, Johannes
last_name: Neukäufer
- first_name: Christoph
full_name: Hiller, Christoph
last_name: Hiller
- first_name: Ilja
full_name: Ausner, Ilja
last_name: Ausner
- first_name: Ansor
full_name: Gäbler, Ansor
last_name: Gäbler
- first_name: Reiner
full_name: Chromik, Reiner
last_name: Chromik
- first_name: Jan
full_name: Maćkowiak, Jan
last_name: Maćkowiak
- first_name: Jerzy
full_name: Maćkowiak, Jerzy
last_name: Maćkowiak
- first_name: Jose Luis
full_name: Sola Cervera, Jose Luis
last_name: Sola Cervera
- first_name: Christian
full_name: Geipel, Christian
last_name: Geipel
- first_name: Jost
full_name: Brinkmann, Jost
last_name: Brinkmann
- first_name: Jürgen
full_name: Bausa, Jürgen
last_name: Bausa
- first_name: Sebastian
full_name: Zeck, Sebastian
last_name: Zeck
- first_name: Mark
full_name: Hapke, Mark
last_name: Hapke
- first_name: Florian
full_name: Forner, Florian
last_name: Forner
- first_name: Florian
full_name: Habla, Florian
last_name: Habla
- first_name: Manuel
full_name: Knaup, Manuel
last_name: Knaup
- first_name: Robin
full_name: Schulz, Robin
last_name: Schulz
- first_name: Michael
full_name: Schultes, Michael
last_name: Schultes
- first_name: Thomas
full_name: Harlacher, Thomas
last_name: Harlacher
- first_name: Nicole
full_name: Lutters, Nicole
id: '22006'
last_name: Lutters
orcid: 0009-0006-7828-8448
- first_name: Eugeny
full_name: Kenig, Eugeny
id: '665'
last_name: Kenig
- first_name: Katharina
full_name: Jasch, Katharina
last_name: Jasch
- first_name: Mandy
full_name: Paschetag, Mandy
last_name: Paschetag
- first_name: Stephan
full_name: Scholl, Stephan
last_name: Scholl
- first_name: Marcus
full_name: Grünewald, Marcus
last_name: Grünewald
- first_name: Georg
full_name: Brösigke, Georg
last_name: Brösigke
- first_name: Jens-Uwe
full_name: Repke, Jens-Uwe
last_name: Repke
- first_name: Harald
full_name: Klein, Harald
last_name: Klein
- first_name: Sebastian
full_name: Rehfeldt, Sebastian
last_name: Rehfeldt
citation:
ama: 'Neumann M, Xia M, Pöschmann R, et al. Towards reliable HETP values: Lessons
learned from standardized separation efficiency measurements. Separation and
Purification Technology. 2025;361. doi:10.1016/j.seppur.2025.131436'
apa: 'Neumann, M., Xia, M., Pöschmann, R., Merkel, A., Staud, R., Schneider, H.,
Ehlert, T., Paschold, J., Müller, S., Harding, L.-S., Neukäufer, J., Hiller, C.,
Ausner, I., Gäbler, A., Chromik, R., Maćkowiak, J., Maćkowiak, J., Sola Cervera,
J. L., Geipel, C., … Rehfeldt, S. (2025). Towards reliable HETP values: Lessons
learned from standardized separation efficiency measurements. Separation and
Purification Technology, 361, Article 131436. https://doi.org/10.1016/j.seppur.2025.131436'
bibtex: '@article{Neumann_Xia_Pöschmann_Merkel_Staud_Schneider_Ehlert_Paschold_Müller_Harding_et
al._2025, title={Towards reliable HETP values: Lessons learned from standardized
separation efficiency measurements}, volume={361}, DOI={10.1016/j.seppur.2025.131436},
number={131436}, journal={Separation and Purification Technology}, publisher={Elsevier
BV}, author={Neumann, Maximilian and Xia, Marc and Pöschmann, René and Merkel,
Amelie and Staud, Rolf and Schneider, Hannes and Ehlert, Thomas and Paschold,
Jürgen and Müller, Steffen and Harding, Laura-Selin and et al.}, year={2025} }'
chicago: 'Neumann, Maximilian, Marc Xia, René Pöschmann, Amelie Merkel, Rolf Staud,
Hannes Schneider, Thomas Ehlert, et al. “Towards Reliable HETP Values: Lessons
Learned from Standardized Separation Efficiency Measurements.” Separation and
Purification Technology 361 (2025). https://doi.org/10.1016/j.seppur.2025.131436.'
ieee: 'M. Neumann et al., “Towards reliable HETP values: Lessons learned
from standardized separation efficiency measurements,” Separation and Purification
Technology, vol. 361, Art. no. 131436, 2025, doi: 10.1016/j.seppur.2025.131436.'
mla: 'Neumann, Maximilian, et al. “Towards Reliable HETP Values: Lessons Learned
from Standardized Separation Efficiency Measurements.” Separation and Purification
Technology, vol. 361, 131436, Elsevier BV, 2025, doi:10.1016/j.seppur.2025.131436.'
short: M. Neumann, M. Xia, R. Pöschmann, A. Merkel, R. Staud, H. Schneider, T. Ehlert,
J. Paschold, S. Müller, L.-S. Harding, J. Neukäufer, C. Hiller, I. Ausner, A.
Gäbler, R. Chromik, J. Maćkowiak, J. Maćkowiak, J.L. Sola Cervera, C. Geipel,
J. Brinkmann, J. Bausa, S. Zeck, M. Hapke, F. Forner, F. Habla, M. Knaup, R. Schulz,
M. Schultes, T. Harlacher, N. Lutters, E. Kenig, K. Jasch, M. Paschetag, S. Scholl,
M. Grünewald, G. Brösigke, J.-U. Repke, H. Klein, S. Rehfeldt, Separation and
Purification Technology 361 (2025).
date_created: 2025-01-13T11:35:51Z
date_updated: 2025-02-28T07:57:11Z
department:
- _id: '9'
- _id: '145'
- _id: '831'
doi: 10.1016/j.seppur.2025.131436
intvolume: ' 361'
language:
- iso: eng
publication: Separation and Purification Technology
publication_identifier:
issn:
- 1383-5866
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: 'Towards reliable HETP values: Lessons learned from standardized separation
efficiency measurements'
type: journal_article
user_id: '22006'
volume: 361
year: '2025'
...
---
_id: '58691'
author:
- first_name: Vanessa
full_name: Albus, Vanessa
id: '80690'
last_name: Albus
citation:
ama: 'Albus V. Paradigmenwechsel und Metapher. Ein Weg zur Gesellschaft der Nachhaltigkeit?
In: Kokoschka V, Kosak S, Paganini C, Rademacher L, eds. Nachhaltigkeit in
der Medienkommunikation. Ethische Anforderungen und praktische Lösungsansätze.
Vol 23. Kommunikations- und Medienethik. Nomos; 2025:171-184.'
apa: Albus, V. (2025). Paradigmenwechsel und Metapher. Ein Weg zur Gesellschaft
der Nachhaltigkeit? In V. Kokoschka, S. Kosak, C. Paganini, & L. Rademacher
(Eds.), Nachhaltigkeit in der Medienkommunikation. Ethische Anforderungen und
praktische Lösungsansätze (Vol. 23, pp. 171–184). Nomos.
bibtex: '@inbook{Albus_2025, place={Baden-Baden}, series={Kommunikations- und Medienethik},
title={Paradigmenwechsel und Metapher. Ein Weg zur Gesellschaft der Nachhaltigkeit?},
volume={23}, booktitle={Nachhaltigkeit in der Medienkommunikation. Ethische Anforderungen
und praktische Lösungsansätze}, publisher={Nomos}, author={Albus, Vanessa}, editor={Kokoschka,
Vanessa and Kosak, Stefan and Paganini, Claudia and Rademacher, Lars}, year={2025},
pages={171–184}, collection={Kommunikations- und Medienethik} }'
chicago: 'Albus, Vanessa. “Paradigmenwechsel und Metapher. Ein Weg zur Gesellschaft
der Nachhaltigkeit?” In Nachhaltigkeit in der Medienkommunikation. Ethische
Anforderungen und praktische Lösungsansätze, edited by Vanessa Kokoschka,
Stefan Kosak, Claudia Paganini, and Lars Rademacher, 23:171–84. Kommunikations-
und Medienethik. Baden-Baden: Nomos, 2025.'
ieee: 'V. Albus, “Paradigmenwechsel und Metapher. Ein Weg zur Gesellschaft der Nachhaltigkeit?,”
in Nachhaltigkeit in der Medienkommunikation. Ethische Anforderungen und praktische
Lösungsansätze, vol. 23, V. Kokoschka, S. Kosak, C. Paganini, and L. Rademacher,
Eds. Baden-Baden: Nomos, 2025, pp. 171–184.'
mla: Albus, Vanessa. “Paradigmenwechsel und Metapher. Ein Weg zur Gesellschaft der
Nachhaltigkeit?” Nachhaltigkeit in der Medienkommunikation. Ethische Anforderungen
und praktische Lösungsansätze, edited by Vanessa Kokoschka et al., vol. 23,
Nomos, 2025, pp. 171–84.
short: 'V. Albus, in: V. Kokoschka, S. Kosak, C. Paganini, L. Rademacher (Eds.),
Nachhaltigkeit in der Medienkommunikation. Ethische Anforderungen und praktische
Lösungsansätze, Nomos, Baden-Baden, 2025, pp. 171–184.'
date_created: 2025-02-18T11:05:17Z
date_updated: 2025-03-06T21:48:36Z
ddc:
- '100'
editor:
- first_name: Vanessa
full_name: Kokoschka, Vanessa
last_name: Kokoschka
- first_name: Stefan
full_name: Kosak, Stefan
last_name: Kosak
- first_name: Claudia
full_name: Paganini, Claudia
last_name: Paganini
- first_name: Lars
full_name: Rademacher, Lars
last_name: Rademacher
file:
- access_level: open_access
content_type: application/pdf
creator: nilsz
date_created: 2025-03-06T21:47:04Z
date_updated: 2025-03-06T21:47:04Z
file_id: '58927'
file_name: Paradigmenwechsel und Metapher. Ein Weg zur Gesellschaft der Nachhaltigkeit.pdf
file_size: 134898
relation: main_file
file_date_updated: 2025-03-06T21:47:04Z
has_accepted_license: '1'
intvolume: ' 23'
language:
- iso: ger
oa: '1'
page: 171-184
place: Baden-Baden
publication: Nachhaltigkeit in der Medienkommunikation. Ethische Anforderungen und
praktische Lösungsansätze
publication_identifier:
isbn:
- ISBN 978-3-7560-1814-7
- ISBN 978-3-7489-4061-6 (eBook)
publication_status: published
publisher: Nomos
related_material:
link:
- relation: contains
url: https://www.nomos-elibrary.de/10.5771/9783748940616-171/paradigmenwechsel-und-metapher-ein-weg-zur-gesellschaft-der-nachhaltigkeit?page=3
series_title: Kommunikations- und Medienethik
status: public
title: Paradigmenwechsel und Metapher. Ein Weg zur Gesellschaft der Nachhaltigkeit?
type: book_chapter
user_id: '57447'
volume: 23
year: '2025'
...