---
_id: '9783'
abstract:
- lang: eng
  text: To optimize the ultrasound irradiation for cavitation based ultrasound applications
    like sonochemistry or ultrasound cleaning, the correlation between cavitation
    intensity and the resulting effect on the process is of interest. Furthermore,
    changing conditions like temperature and pressure result in varying acoustic properties
    of the liquid. That might necessitate an adaption of the ultrasound irradiation.
    To detect such changes during operation, process monitoring is desired. Labor
    intensive processes, that might be carried out for several hours, also require
    process monitoring to increase their reliability by detection of changes or malfunctions
    during operation. In some applications cavitation detection and monitoring can
    be achieved by the application of sensors in the sound field. Though the application
    of sensors is possible, this necessitates modifications on the system and the
    sensor might disturb the sound field. In other applications harsh, process conditions
    prohibit the application of sensors in the sound field. Therefore alternative
    techniques for cavitation detection and monitoring are desired. The applicability
    of an external microphone and a self-sensing ultrasound transducer for cavitation
    detection were experimentally investigated. Both methods were found to be suitable
    and easily applicable.
author:
- first_name: Peter
  full_name: Bornmann, Peter
  last_name: Bornmann
- first_name: Tobias
  full_name: Hemsel, Tobias
  id: '210'
  last_name: Hemsel
- first_name: Walter
  full_name: Sextro, Walter
  id: '21220'
  last_name: Sextro
- first_name: Takafumi
  full_name: Maeda, Takafumi
  last_name: Maeda
- first_name: Takeshi
  full_name: Morita, Takeshi
  last_name: Morita
citation:
  ama: 'Bornmann P, Hemsel T, Sextro W, Maeda T, Morita T. Non-perturbing cavitation
    detection / monitoring in sonochemical reactors. In: <i>Ultrasonics Symposium
    (IUS), 2012 IEEE International</i>. ; 2012:1141-1144. doi:<a href="https://doi.org/10.1109/ULTSYM.2012.0284">10.1109/ULTSYM.2012.0284</a>'
  apa: Bornmann, P., Hemsel, T., Sextro, W., Maeda, T., &#38; Morita, T. (2012). Non-perturbing
    cavitation detection / monitoring in sonochemical reactors. In <i>Ultrasonics
    Symposium (IUS), 2012 IEEE International</i> (pp. 1141–1144). <a href="https://doi.org/10.1109/ULTSYM.2012.0284">https://doi.org/10.1109/ULTSYM.2012.0284</a>
  bibtex: '@inproceedings{Bornmann_Hemsel_Sextro_Maeda_Morita_2012, title={Non-perturbing
    cavitation detection / monitoring in sonochemical reactors}, DOI={<a href="https://doi.org/10.1109/ULTSYM.2012.0284">10.1109/ULTSYM.2012.0284</a>},
    booktitle={Ultrasonics Symposium (IUS), 2012 IEEE International}, author={Bornmann,
    Peter and Hemsel, Tobias and Sextro, Walter and Maeda, Takafumi and Morita, Takeshi},
    year={2012}, pages={1141–1144} }'
  chicago: Bornmann, Peter, Tobias Hemsel, Walter Sextro, Takafumi Maeda, and Takeshi
    Morita. “Non-Perturbing Cavitation Detection / Monitoring in Sonochemical Reactors.”
    In <i>Ultrasonics Symposium (IUS), 2012 IEEE International</i>, 1141–44, 2012.
    <a href="https://doi.org/10.1109/ULTSYM.2012.0284">https://doi.org/10.1109/ULTSYM.2012.0284</a>.
  ieee: P. Bornmann, T. Hemsel, W. Sextro, T. Maeda, and T. Morita, “Non-perturbing
    cavitation detection / monitoring in sonochemical reactors,” in <i>Ultrasonics
    Symposium (IUS), 2012 IEEE International</i>, 2012, pp. 1141–1144.
  mla: Bornmann, Peter, et al. “Non-Perturbing Cavitation Detection / Monitoring in
    Sonochemical Reactors.” <i>Ultrasonics Symposium (IUS), 2012 IEEE International</i>,
    2012, pp. 1141–44, doi:<a href="https://doi.org/10.1109/ULTSYM.2012.0284">10.1109/ULTSYM.2012.0284</a>.
  short: 'P. Bornmann, T. Hemsel, W. Sextro, T. Maeda, T. Morita, in: Ultrasonics
    Symposium (IUS), 2012 IEEE International, 2012, pp. 1141–1144.'
date_created: 2019-05-13T13:18:49Z
date_updated: 2022-01-06T07:04:20Z
department:
- _id: '151'
doi: 10.1109/ULTSYM.2012.0284
keyword:
- cavitation
- chemical reactors
- microphones
- process monitoring
- reliability
- ultrasonic applications
- ultrasonic waves
- acoustic properties
- cavitation based ultrasound applications
- cavitation intensity
- change detection reliability
- external microphone
- malfunction detection reliability
- nonperturbing cavitation detection
- nonperturbing cavitation monitoring
- process monitoring
- self-sensing ultrasound transducer
- sonochemical reactors
- sonochemistry
- ultrasound cleaning
- ultrasound irradiation
- Acoustics
- Liquids
- Monitoring
- Sensors
- Sonar equipment
- Transducers
- Ultrasonic imaging
language:
- iso: eng
page: 1141-1144
publication: Ultrasonics Symposium (IUS), 2012 IEEE International
publication_identifier:
  issn:
  - 1948-5719
quality_controlled: '1'
status: public
title: Non-perturbing cavitation detection / monitoring in sonochemical reactors
type: conference
user_id: '55222'
year: '2012'
...
---
_id: '9784'
abstract:
- lang: eng
  text: Piezoelectric inertia motors use the inertia of a body to drive it by means
    of a friction contact in a series of small steps. These motors can operate in
    ``stick-slip'' or ``slip-slip'' mode, with the fundamental frequency of the driving
    signal ranging from several Hertz to more than 100 kHz. To predict the motor characteristics,
    a Coulomb friction model is sufficient in many cases, but numerical simulation
    requires microscopic time steps. This contribution proposes a much faster simulation
    technique using one evaluation per period of the excitation signal. The proposed
    technique produces results very close to those of timestep simulation for ultrasonics
    inertia motors and allows direct determination of the steady-state velocity of
    an inertia motor from the motion profile of the driving part. Thus it is a useful
    simulation technique which can be applied in both analysis and design of inertia
    motors, especially for parameter studies and optimisation.
author:
- first_name: Matthias
  full_name: Hunstig, Matthias
  last_name: Hunstig
- first_name: Tobias
  full_name: Hemsel, Tobias
  last_name: Hemsel
- first_name: Walter
  full_name: Sextro, Walter
  last_name: Sextro
citation:
  ama: 'Hunstig M, Hemsel T, Sextro W. An efficient simulation technique for high-frequency
    piezoelectric inertia motors. In: <i>Ultrasonics Symposium (IUS), 2012 IEEE International</i>.
    ; 2012:277-280. doi:<a href="https://doi.org/10.1109/ULTSYM.2012.0068">10.1109/ULTSYM.2012.0068</a>'
  apa: Hunstig, M., Hemsel, T., &#38; Sextro, W. (2012). An efficient simulation technique
    for high-frequency piezoelectric inertia motors. In <i>Ultrasonics Symposium (IUS),
    2012 IEEE International</i> (pp. 277–280). <a href="https://doi.org/10.1109/ULTSYM.2012.0068">https://doi.org/10.1109/ULTSYM.2012.0068</a>
  bibtex: '@inproceedings{Hunstig_Hemsel_Sextro_2012, title={An efficient simulation
    technique for high-frequency piezoelectric inertia motors}, DOI={<a href="https://doi.org/10.1109/ULTSYM.2012.0068">10.1109/ULTSYM.2012.0068</a>},
    booktitle={Ultrasonics Symposium (IUS), 2012 IEEE International}, author={Hunstig,
    Matthias and Hemsel, Tobias and Sextro, Walter}, year={2012}, pages={277–280}
    }'
  chicago: Hunstig, Matthias, Tobias Hemsel, and Walter Sextro. “An Efficient Simulation
    Technique for High-Frequency Piezoelectric Inertia Motors.” In <i>Ultrasonics
    Symposium (IUS), 2012 IEEE International</i>, 277–80, 2012. <a href="https://doi.org/10.1109/ULTSYM.2012.0068">https://doi.org/10.1109/ULTSYM.2012.0068</a>.
  ieee: M. Hunstig, T. Hemsel, and W. Sextro, “An efficient simulation technique for
    high-frequency piezoelectric inertia motors,” in <i>Ultrasonics Symposium (IUS),
    2012 IEEE International</i>, 2012, pp. 277–280.
  mla: Hunstig, Matthias, et al. “An Efficient Simulation Technique for High-Frequency
    Piezoelectric Inertia Motors.” <i>Ultrasonics Symposium (IUS), 2012 IEEE International</i>,
    2012, pp. 277–80, doi:<a href="https://doi.org/10.1109/ULTSYM.2012.0068">10.1109/ULTSYM.2012.0068</a>.
  short: 'M. Hunstig, T. Hemsel, W. Sextro, in: Ultrasonics Symposium (IUS), 2012
    IEEE International, 2012, pp. 277–280.'
date_created: 2019-05-13T13:20:17Z
date_updated: 2022-01-06T07:04:20Z
department:
- _id: '151'
doi: 10.1109/ULTSYM.2012.0068
keyword:
- friction
- ultrasonic motors
- Coulomb friction model
- efficient simulation technique
- friction contact
- high-frequency piezoelectric inertia motor
- motor characteristics prediction
- numerical simulation
- slip-slip mode
- stick-slip mode
- time-step simulation
- ultrasonic inertia motor
- Acceleration
- Acoustics
- Actuators
- Computational modeling
- Friction
- Numerical models
- Steady-state
language:
- iso: eng
page: 277-280
publication: Ultrasonics Symposium (IUS), 2012 IEEE International
publication_identifier:
  issn:
  - 1948-5719
quality_controlled: '1'
status: public
title: An efficient simulation technique for high-frequency piezoelectric inertia
  motors
type: conference
user_id: '55222'
year: '2012'
...
---
_id: '9785'
abstract:
- lang: eng
  text: Hydrothermal method enables to synthesize high quality piezoelectric materials.
    To shorten the reaction time and to get higher quality materials, we propose an
    ultrasonic irradiation to the solution during the hydrothermal method. We named
    it ultrasonic assisted hydrothermal method (UAHTM). We have synthesized lead-free
    piezoelectric material and PZT thin film and the effect of UAHTM have been confirmed.
    In this study, we tried to improve UAHTM. First, to generate powerful and stable
    ultrasonic irradiation at high temperature on UAHTM, we developed a new transducer
    using LiNbO3 single crystal. Second, to prevent contamination to the materials,
    A Teflon cover on the tip of transducer was attached.
author:
- first_name: Gaku
  full_name: Isobe, Gaku
  last_name: Isobe
- first_name: Ryo
  full_name: Ageba, Ryo
  last_name: Ageba
- first_name: Takafumi
  full_name: Maeda, Takafumi
  last_name: Maeda
- first_name: Peter
  full_name: Bornmann, Peter
  last_name: Bornmann
- first_name: Tobias
  full_name: Hemsel, Tobias
  id: '210'
  last_name: Hemsel
- first_name: Takeshi
  full_name: Morita, Takeshi
  last_name: Morita
citation:
  ama: 'Isobe G, Ageba R, Maeda T, Bornmann P, Hemsel T, Morita T. Synthesis of piezoelectric
    materials by ultrasonic assisted hydrothermal method. In: B. J. Linde B, Paczkowski
    J, Ponikwicki N, eds. <i>AIP Conference Proceedings</i>. Vol 1433. AIP; 2012:569-572.
    doi:<a href="https://doi.org/10.1063/1.3703251">10.1063/1.3703251</a>'
  apa: Isobe, G., Ageba, R., Maeda, T., Bornmann, P., Hemsel, T., &#38; Morita, T.
    (2012). Synthesis of piezoelectric materials by ultrasonic assisted hydrothermal
    method. In B. B. J. Linde, J. Paczkowski, &#38; N. Ponikwicki (Eds.), <i>AIP Conference
    Proceedings</i> (Vol. 1433, pp. 569–572). AIP. <a href="https://doi.org/10.1063/1.3703251">https://doi.org/10.1063/1.3703251</a>
  bibtex: '@inproceedings{Isobe_Ageba_Maeda_Bornmann_Hemsel_Morita_2012, title={Synthesis
    of piezoelectric materials by ultrasonic assisted hydrothermal method}, volume={1433},
    DOI={<a href="https://doi.org/10.1063/1.3703251">10.1063/1.3703251</a>}, number={1},
    booktitle={AIP Conference Proceedings}, publisher={AIP}, author={Isobe, Gaku and
    Ageba, Ryo and Maeda, Takafumi and Bornmann, Peter and Hemsel, Tobias and Morita,
    Takeshi}, editor={B. J. Linde, Bogumil and Paczkowski, Jacek and Ponikwicki, NikodemEditors},
    year={2012}, pages={569–572} }'
  chicago: Isobe, Gaku, Ryo Ageba, Takafumi Maeda, Peter Bornmann, Tobias Hemsel,
    and Takeshi Morita. “Synthesis of Piezoelectric Materials by Ultrasonic Assisted
    Hydrothermal Method.” In <i>AIP Conference Proceedings</i>, edited by Bogumil
    B. J. Linde, Jacek Paczkowski, and Nikodem Ponikwicki, 1433:569–72. AIP, 2012.
    <a href="https://doi.org/10.1063/1.3703251">https://doi.org/10.1063/1.3703251</a>.
  ieee: G. Isobe, R. Ageba, T. Maeda, P. Bornmann, T. Hemsel, and T. Morita, “Synthesis
    of piezoelectric materials by ultrasonic assisted hydrothermal method,” in <i>AIP
    Conference Proceedings</i>, 2012, vol. 1433, no. 1, pp. 569–572.
  mla: Isobe, Gaku, et al. “Synthesis of Piezoelectric Materials by Ultrasonic Assisted
    Hydrothermal Method.” <i>AIP Conference Proceedings</i>, edited by Bogumil B.
    J. Linde et al., vol. 1433, no. 1, AIP, 2012, pp. 569–72, doi:<a href="https://doi.org/10.1063/1.3703251">10.1063/1.3703251</a>.
  short: 'G. Isobe, R. Ageba, T. Maeda, P. Bornmann, T. Hemsel, T. Morita, in: B.
    B. J. Linde, J. Paczkowski, N. Ponikwicki (Eds.), AIP Conference Proceedings,
    AIP, 2012, pp. 569–572.'
date_created: 2019-05-13T13:21:56Z
date_updated: 2022-01-06T07:04:20Z
department:
- _id: '151'
doi: 10.1063/1.3703251
editor:
- first_name: Bogumil
  full_name: B. J. Linde, Bogumil
  last_name: B. J. Linde
- first_name: Jacek
  full_name: Paczkowski, Jacek
  last_name: Paczkowski
- first_name: Nikodem
  full_name: Ponikwicki, Nikodem
  last_name: Ponikwicki
intvolume: '      1433'
issue: '1'
keyword:
- contamination
- lead compounds
- piezoelectric materials
- piezoelectric thin films
- piezoelectric transducers
- ultrasonic effects
language:
- iso: eng
page: 569-572
publication: AIP Conference Proceedings
publisher: AIP
quality_controlled: '1'
status: public
title: Synthesis of piezoelectric materials by ultrasonic assisted hydrothermal method
type: conference
user_id: '55222'
volume: 1433
year: '2012'
...
---
_id: '9786'
abstract:
- lang: eng
  text: Self-optimizing mechatronic systems are a new class of technical systems.
    On the one hand, new challenges regarding dependability arise from their additional
    complexity and adaptivity. On the other hand, their abilities enable new concepts
    and methods to improve the dependability of mechatronic systems. This paper introduces
    a multi-level dependability concept for selfoptimizing mechatronic systems and
    shows how probabilistic planning can be used to improve the availability and reliability
    of systems in the operating phase. The general idea to improve the availability
    of autonomous systems by applying probabilistic planning methods to avoid energy
    shortages is exemplified on the example of an innovative railway vehicle.
author:
- first_name: Benjamin
  full_name: Klöpper, Benjamin
  last_name: Klöpper
- first_name: Christoph
  full_name: Sondermann-Wölke, Christoph
  last_name: Sondermann-Wölke
- first_name: Christoph
  full_name: Romaus, Christoph
  last_name: Romaus
citation:
  ama: Klöpper B, Sondermann-Wölke C, Romaus C. Probabilistic Planning for Predictive
    Condition Monitoring and Adaptation Within the Self-Optimizing Energy Management
    of an Autonomous Railway Vehicle. <i>Journal of Robotics and Mechatronics</i>.
    2012;24(1):5-15.
  apa: Klöpper, B., Sondermann-Wölke, C., &#38; Romaus, C. (2012). Probabilistic Planning
    for Predictive Condition Monitoring and Adaptation Within the Self-Optimizing
    Energy Management of an Autonomous Railway Vehicle. <i>Journal of Robotics and
    Mechatronics</i>, <i>24</i>(1), 5–15.
  bibtex: '@article{Klöpper_Sondermann-Wölke_Romaus_2012, title={Probabilistic Planning
    for Predictive Condition Monitoring and Adaptation Within the Self-Optimizing
    Energy Management of an Autonomous Railway Vehicle}, volume={24}, number={1},
    journal={Journal of Robotics and Mechatronics}, author={Klöpper, Benjamin and
    Sondermann-Wölke, Christoph and Romaus, Christoph}, year={2012}, pages={5–15}
    }'
  chicago: 'Klöpper, Benjamin, Christoph Sondermann-Wölke, and Christoph Romaus. “Probabilistic
    Planning for Predictive Condition Monitoring and Adaptation Within the Self-Optimizing
    Energy Management of an Autonomous Railway Vehicle.” <i>Journal of Robotics and
    Mechatronics</i> 24, no. 1 (2012): 5–15.'
  ieee: B. Klöpper, C. Sondermann-Wölke, and C. Romaus, “Probabilistic Planning for
    Predictive Condition Monitoring and Adaptation Within the Self-Optimizing Energy
    Management of an Autonomous Railway Vehicle,” <i>Journal of Robotics and Mechatronics</i>,
    vol. 24, no. 1, pp. 5–15, 2012.
  mla: Klöpper, Benjamin, et al. “Probabilistic Planning for Predictive Condition
    Monitoring and Adaptation Within the Self-Optimizing Energy Management of an Autonomous
    Railway Vehicle.” <i>Journal of Robotics and Mechatronics</i>, vol. 24, no. 1,
    2012, pp. 5–15.
  short: B. Klöpper, C. Sondermann-Wölke, C. Romaus, Journal of Robotics and Mechatronics
    24 (2012) 5–15.
date_created: 2019-05-13T13:23:45Z
date_updated: 2022-01-06T07:04:20Z
department:
- _id: '151'
intvolume: '        24'
issue: '1'
keyword:
- self-optimizing systems
- dependability
- probabilistic planning
- energy management
language:
- iso: eng
page: 5-15
publication: Journal of Robotics and Mechatronics
quality_controlled: '1'
status: public
title: Probabilistic Planning for Predictive Condition Monitoring and Adaptation Within
  the Self-Optimizing Energy Management of an Autonomous Railway Vehicle
type: journal_article
user_id: '55222'
volume: 24
year: '2012'
...
---
_id: '9787'
author:
- first_name: Sergej
  full_name: Kohl, Sergej
  last_name: Kohl
- first_name: Walter
  full_name: Sextro, Walter
  id: '21220'
  last_name: Sextro
- first_name: Armin
  full_name: Zuber, Armin
  last_name: Zuber
citation:
  ama: 'Kohl S, Sextro W, Zuber A. Benteler Vehicle Dynamics -- Fahrdynamikentwicklung
    basierend auf einer neuen Auslegungstheorie. In: <i>8. Tag Des Fahrwerks, Aachen,
    2012</i>. Institut für Kraftfahrzeuge, RWTH Aachen University in Aachen; 2012:38-60.'
  apa: Kohl, S., Sextro, W., &#38; Zuber, A. (2012). Benteler Vehicle Dynamics --
    Fahrdynamikentwicklung basierend auf einer neuen Auslegungstheorie. In <i>8. Tag
    des Fahrwerks, Aachen, 2012</i> (pp. 38–60). Institut für Kraftfahrzeuge, RWTH
    Aachen University in Aachen.
  bibtex: '@inproceedings{Kohl_Sextro_Zuber_2012, place={Institut für Kraftfahrzeuge,
    RWTH Aachen University in Aachen}, title={Benteler Vehicle Dynamics -- Fahrdynamikentwicklung
    basierend auf einer neuen Auslegungstheorie}, booktitle={8. Tag des Fahrwerks,
    Aachen, 2012}, author={Kohl, Sergej and Sextro, Walter and Zuber, Armin}, year={2012},
    pages={38–60} }'
  chicago: Kohl, Sergej, Walter Sextro, and Armin Zuber. “Benteler Vehicle Dynamics
    -- Fahrdynamikentwicklung Basierend Auf Einer Neuen Auslegungstheorie.” In <i>8.
    Tag Des Fahrwerks, Aachen, 2012</i>, 38–60. Institut für Kraftfahrzeuge, RWTH
    Aachen University in Aachen, 2012.
  ieee: S. Kohl, W. Sextro, and A. Zuber, “Benteler Vehicle Dynamics -- Fahrdynamikentwicklung
    basierend auf einer neuen Auslegungstheorie,” in <i>8. Tag des Fahrwerks, Aachen,
    2012</i>, 2012, pp. 38–60.
  mla: Kohl, Sergej, et al. “Benteler Vehicle Dynamics -- Fahrdynamikentwicklung Basierend
    Auf Einer Neuen Auslegungstheorie.” <i>8. Tag Des Fahrwerks, Aachen, 2012</i>,
    2012, pp. 38–60.
  short: 'S. Kohl, W. Sextro, A. Zuber, in: 8. Tag Des Fahrwerks, Aachen, 2012, Institut
    für Kraftfahrzeuge, RWTH Aachen University in Aachen, 2012, pp. 38–60.'
date_created: 2019-05-13T13:25:59Z
date_updated: 2022-01-06T07:04:20Z
department:
- _id: '151'
language:
- iso: eng
page: 38-60
place: Institut für Kraftfahrzeuge, RWTH Aachen University in Aachen
popular_science: '1'
publication: 8. Tag des Fahrwerks, Aachen, 2012
status: public
title: Benteler Vehicle Dynamics -- Fahrdynamikentwicklung basierend auf einer neuen
  Auslegungstheorie
type: conference
user_id: '55222'
year: '2012'
...
---
_id: '9788'
abstract:
- lang: eng
  text: 'A hydrothermal method utilizes a crystallization process in the solution
    so that the pure and high-quality powders can be realized. Sintering from the
    hydrothermal KNbO3 and NaNbO3 powders, a high-dense lead-free piezoelectric (K,Na)NbO3
    ceramics could be obtained (density: 98.8\%). Concerning about the g33 constant,
    high value as large as commercial PZT ceramics was measured. Therefore, the hydrothermal
    (K,Na)NbO3 ceramics is usable for the sensors and the energy harvesting devices.
    To demonstrate the (K,Na)NbO3 ceramics, a hydrophone sensor was fabricated and
    evaluated.'
author:
- first_name: Takafumi
  full_name: Maeda, Takafumi
  last_name: Maeda
- first_name: Peter
  full_name: Bornmann, Peter
  last_name: Bornmann
- first_name: Tobias
  full_name: Hemsel, Tobias
  id: '210'
  last_name: Hemsel
- first_name: Takeshi
  full_name: Morita, Takeshi
  last_name: Morita
citation:
  ama: 'Maeda T, Bornmann P, Hemsel T, Morita T. Piezoelectric applications of hydrothermal
    lead-free (K0.48Na0.52)NbO3 ceramics. In: <i>Ultrasonics Symposium (IUS), 2012
    IEEE International</i>. ; 2012:194-195. doi:<a href="https://doi.org/10.1109/ULTSYM.2012.0048">10.1109/ULTSYM.2012.0048</a>'
  apa: Maeda, T., Bornmann, P., Hemsel, T., &#38; Morita, T. (2012). Piezoelectric
    applications of hydrothermal lead-free (K0.48Na0.52)NbO3 ceramics. In <i>Ultrasonics
    Symposium (IUS), 2012 IEEE International</i> (pp. 194–195). <a href="https://doi.org/10.1109/ULTSYM.2012.0048">https://doi.org/10.1109/ULTSYM.2012.0048</a>
  bibtex: '@inproceedings{Maeda_Bornmann_Hemsel_Morita_2012, title={Piezoelectric
    applications of hydrothermal lead-free (K0.48Na0.52)NbO3 ceramics}, DOI={<a href="https://doi.org/10.1109/ULTSYM.2012.0048">10.1109/ULTSYM.2012.0048</a>},
    booktitle={Ultrasonics Symposium (IUS), 2012 IEEE International}, author={Maeda,
    Takafumi and Bornmann, Peter and Hemsel, Tobias and Morita, Takeshi}, year={2012},
    pages={194–195} }'
  chicago: Maeda, Takafumi, Peter Bornmann, Tobias Hemsel, and Takeshi Morita. “Piezoelectric
    Applications of Hydrothermal Lead-Free (K0.48Na0.52)NbO3 Ceramics.” In <i>Ultrasonics
    Symposium (IUS), 2012 IEEE International</i>, 194–95, 2012. <a href="https://doi.org/10.1109/ULTSYM.2012.0048">https://doi.org/10.1109/ULTSYM.2012.0048</a>.
  ieee: T. Maeda, P. Bornmann, T. Hemsel, and T. Morita, “Piezoelectric applications
    of hydrothermal lead-free (K0.48Na0.52)NbO3 ceramics,” in <i>Ultrasonics Symposium
    (IUS), 2012 IEEE International</i>, 2012, pp. 194–195.
  mla: Maeda, Takafumi, et al. “Piezoelectric Applications of Hydrothermal Lead-Free
    (K0.48Na0.52)NbO3 Ceramics.” <i>Ultrasonics Symposium (IUS), 2012 IEEE International</i>,
    2012, pp. 194–95, doi:<a href="https://doi.org/10.1109/ULTSYM.2012.0048">10.1109/ULTSYM.2012.0048</a>.
  short: 'T. Maeda, P. Bornmann, T. Hemsel, T. Morita, in: Ultrasonics Symposium (IUS),
    2012 IEEE International, 2012, pp. 194–195.'
date_created: 2019-05-13T13:28:05Z
date_updated: 2022-01-06T07:04:20Z
department:
- _id: '151'
doi: 10.1109/ULTSYM.2012.0048
keyword:
- crystallisation
- hydrophones
- piezoceramics
- potassium compounds
- powder technology
- powders
- sensors
- sintering
- sodium compounds
- (K0.48Na0.52)NbO3
- KNbO3 powder
- NaNbO3 powder
- crystallization
- energy harvesting devices
- g33 constant
- hydrophone sensor
- hydrothermal lead-free (K0.48Na0.52)NbO3 ceramics
- hydrothermal method
- piezoelectric applications
- sintering
- Materials
- Transducers
language:
- iso: eng
page: 194-195
publication: Ultrasonics Symposium (IUS), 2012 IEEE International
publication_identifier:
  issn:
  - 1948-5719
quality_controlled: '1'
status: public
title: Piezoelectric applications of hydrothermal lead-free (K0.48Na0.52)NbO3 ceramics
type: conference
user_id: '55222'
year: '2012'
...
---
_id: '9789'
abstract:
- lang: eng
  text: '[$Li_x(Na_0.52K_0.48)_1-x]NbO_3 (0 \leq x \leq 0.091)$ ceramics were synthesized
    using hydrothermal powders and the lithium doping content was controlled to optimize
    their piezoelectric properties. The raw KNbO$_3$ and NaNbO$_3$ powders were obtained
    separately by a hydrothermal method and LiNbO$_3$ powders were prepared by milling
    a commercial LiNbO$_3$ single crystal. These powders were mixed with ethanol at
    a molar ratio LiNbO$_3$: ($Na_0.52K_0.48$)NbO$_3 = x : 1-x$. The synthesized powders
    were sintered at 1060--1120 $\,^{\circ}$C for 2 h. We succeeded in obtaining highly
    dense [$Li_x(Na_0.52K_0.48)_1-x]NbO_3$ ceramics using hydrothermal powder. The
    X-ray diffraction patterns revealed that the crystal phase changed from orthorhombic
    to tetragonal at around x = 0.06. At this morphotropic phase boundary (MPB), the
    c/a ratio changed from 1.016 to 1.024 and the highest piezoelectric constant was
    obtained with the chemical component of [$Li_x(Na_0.52K_0.48)_1-x]NbO_3$. The
    obtained piezoelectric properties were as follows: $k_33 = 0.51, \epsilon 33^T/
    \epsilon _0 = 836$ , $c_33^E = 46$ GPa, $d_33 = 203$ pC/N, and $T_c = 482 $\,^{\circ}$C$.'
author:
- first_name: Takafumi
  full_name: Maeda, Takafumi
  last_name: Maeda
- first_name: Tobias
  full_name: Hemsel, Tobias
  id: '210'
  last_name: Hemsel
- first_name: Takeshi
  full_name: Morita, Takeshi
  last_name: Morita
citation:
  ama: Maeda T, Hemsel T, Morita T. Piezoelectric Properties of Li-Doped (K0.48Na0.52)NbO3
    Ceramics Synthesized Using Hydrothermally-Derived KNbO3 and NaNbO3 Fine Powders.
    <i>Japanese Journal of Applied Physics</i>. 2012;51:09MD08. doi:<a href="https://doi.org/10.1143/JJAP.51.09MD08">10.1143/JJAP.51.09MD08</a>
  apa: Maeda, T., Hemsel, T., &#38; Morita, T. (2012). Piezoelectric Properties of
    Li-Doped (K0.48Na0.52)NbO3 Ceramics Synthesized Using Hydrothermally-Derived KNbO3
    and NaNbO3 Fine Powders. <i>Japanese Journal of Applied Physics</i>, <i>51</i>,
    09MD08. <a href="https://doi.org/10.1143/JJAP.51.09MD08">https://doi.org/10.1143/JJAP.51.09MD08</a>
  bibtex: '@article{Maeda_Hemsel_Morita_2012, title={Piezoelectric Properties of Li-Doped
    (K0.48Na0.52)NbO3 Ceramics Synthesized Using Hydrothermally-Derived KNbO3 and
    NaNbO3 Fine Powders}, volume={51}, DOI={<a href="https://doi.org/10.1143/JJAP.51.09MD08">10.1143/JJAP.51.09MD08</a>},
    journal={Japanese Journal of Applied Physics}, publisher={The Japan Society of
    Applied Physics}, author={Maeda, Takafumi and Hemsel, Tobias and Morita, Takeshi},
    year={2012}, pages={09MD08} }'
  chicago: 'Maeda, Takafumi, Tobias Hemsel, and Takeshi Morita. “Piezoelectric Properties
    of Li-Doped (K0.48Na0.52)NbO3 Ceramics Synthesized Using Hydrothermally-Derived
    KNbO3 and NaNbO3 Fine Powders.” <i>Japanese Journal of Applied Physics</i> 51
    (2012): 09MD08. <a href="https://doi.org/10.1143/JJAP.51.09MD08">https://doi.org/10.1143/JJAP.51.09MD08</a>.'
  ieee: T. Maeda, T. Hemsel, and T. Morita, “Piezoelectric Properties of Li-Doped
    (K0.48Na0.52)NbO3 Ceramics Synthesized Using Hydrothermally-Derived KNbO3 and
    NaNbO3 Fine Powders,” <i>Japanese Journal of Applied Physics</i>, vol. 51, p.
    09MD08, 2012.
  mla: Maeda, Takafumi, et al. “Piezoelectric Properties of Li-Doped (K0.48Na0.52)NbO3
    Ceramics Synthesized Using Hydrothermally-Derived KNbO3 and NaNbO3 Fine Powders.”
    <i>Japanese Journal of Applied Physics</i>, vol. 51, The Japan Society of Applied
    Physics, 2012, p. 09MD08, doi:<a href="https://doi.org/10.1143/JJAP.51.09MD08">10.1143/JJAP.51.09MD08</a>.
  short: T. Maeda, T. Hemsel, T. Morita, Japanese Journal of Applied Physics 51 (2012)
    09MD08.
date_created: 2019-05-13T13:29:10Z
date_updated: 2022-01-06T07:04:20Z
department:
- _id: '151'
doi: 10.1143/JJAP.51.09MD08
intvolume: '        51'
language:
- iso: eng
page: 09MD08
publication: Japanese Journal of Applied Physics
publisher: The Japan Society of Applied Physics
quality_controlled: '1'
status: public
title: Piezoelectric Properties of Li-Doped (K0.48Na0.52)NbO3 Ceramics Synthesized
  Using Hydrothermally-Derived KNbO3 and NaNbO3 Fine Powders
type: journal_article
user_id: '55222'
volume: 51
year: '2012'
...
---
_id: '9791'
abstract:
- lang: eng
  text: 'The rapid development of communication and information technology opens up
    fascinating perspectives, which go far beyond the state of the art in mechatronics:
    mechatronic systems with inherent partial intelligence. These so called self-optimizing
    systems adapt their objectives and behavior autonomously and flexibly to changing
    operating conditions. On the one hand, securing the dependability of such systems
    is challenging due to their complexity and non-deterministic behavior. On the
    other hand, self-optimization can be used to increase the dependability of the
    system during its operation. However, it has to be ensured, that the self-optimization
    works dependable itself. To cope with these challenges, the multi-level dependability
    concept was developed. It enables predictive condition monitoring, influences
    the objectives of the system and determines suitable means to improve the system''s
    dependability during its operation. In this contribution we introduce a procedure
    for the conceptual design of an advanced condition monitoring based on the system''s
    principle solution. The principle solution describes the principal operation mode
    of the system and its desired behavior. It is modeled using the specification
    technique for the domain-spanning description of the principle solution of a self-optimizing
    system and consists of a coherent system of eight partial models (e.g. requirements,
    active structure, system of objectives, behavior, etc.). The partial models are
    analyzed separately in order to derive the components of the multi-level dependability
    concept. In particular, the reliability analysis of the partial model active structure
    is performed to identify the system elements to be monitored and parameters to
    be measured. The principle solution is extended accordingly: e.g. with system
    elements required for the realization of the dependability concept. The advantages
    of the method are shown on the self-optimizing guidance module of a railroad vehicle.'
author:
- first_name: Christoph
  full_name: Sondermann-Wölke , Christoph
  last_name: 'Sondermann-Wölke '
- first_name: Tobias
  full_name: Meyer, Tobias
  last_name: Meyer
- first_name: Rafal
  full_name: Dorociak, Rafal
  last_name: Dorociak
- first_name: Jürgen
  full_name: Gausemeier, Jürgen
  last_name: Gausemeier
- first_name: Walter
  full_name: Sextro, Walter
  id: '21220'
  last_name: Sextro
citation:
  ama: 'Sondermann-Wölke  C, Meyer T, Dorociak R, Gausemeier J, Sextro W. Conceptual
    Design of Advanced Condition Monitoring for a Self-Optimizing System based on
    its Principle Solution. In: <i>Proceedings of the 11th International Probabilistic
    Safety Assessment and Management Conference (PSAM11) and The Annual European Safety
    and Reliability Conference (ESREL2012)</i>. Helsinki, Finland; 2012.'
  apa: Sondermann-Wölke , C., Meyer, T., Dorociak, R., Gausemeier, J., &#38; Sextro,
    W. (2012). Conceptual Design of Advanced Condition Monitoring for a Self-Optimizing
    System based on its Principle Solution. In <i>Proceedings of the 11th International
    Probabilistic Safety Assessment and Management Conference (PSAM11) and The Annual
    European Safety and Reliability Conference (ESREL2012)</i>. Helsinki, Finland.
  bibtex: '@inproceedings{Sondermann-Wölke _Meyer_Dorociak_Gausemeier_Sextro_2012,
    place={Helsinki, Finland}, title={Conceptual Design of Advanced Condition Monitoring
    for a Self-Optimizing System based on its Principle Solution}, booktitle={Proceedings
    of the 11th International Probabilistic Safety Assessment and Management Conference
    (PSAM11) and The Annual European Safety and Reliability Conference (ESREL2012)},
    author={Sondermann-Wölke , Christoph and Meyer, Tobias and Dorociak, Rafal and
    Gausemeier, Jürgen and Sextro, Walter}, year={2012} }'
  chicago: Sondermann-Wölke , Christoph, Tobias Meyer, Rafal Dorociak, Jürgen Gausemeier,
    and Walter Sextro. “Conceptual Design of Advanced Condition Monitoring for a Self-Optimizing
    System Based on Its Principle Solution.” In <i>Proceedings of the 11th International
    Probabilistic Safety Assessment and Management Conference (PSAM11) and The Annual
    European Safety and Reliability Conference (ESREL2012)</i>. Helsinki, Finland,
    2012.
  ieee: C. Sondermann-Wölke , T. Meyer, R. Dorociak, J. Gausemeier, and W. Sextro,
    “Conceptual Design of Advanced Condition Monitoring for a Self-Optimizing System
    based on its Principle Solution,” in <i>Proceedings of the 11th International
    Probabilistic Safety Assessment and Management Conference (PSAM11) and The Annual
    European Safety and Reliability Conference (ESREL2012)</i>, 2012.
  mla: Sondermann-Wölke , Christoph, et al. “Conceptual Design of Advanced Condition
    Monitoring for a Self-Optimizing System Based on Its Principle Solution.” <i>Proceedings
    of the 11th International Probabilistic Safety Assessment and Management Conference
    (PSAM11) and The Annual European Safety and Reliability Conference (ESREL2012)</i>,
    2012.
  short: 'C. Sondermann-Wölke , T. Meyer, R. Dorociak, J. Gausemeier, W. Sextro, in:
    Proceedings of the 11th International Probabilistic Safety Assessment and Management
    Conference (PSAM11) and The Annual European Safety and Reliability Conference
    (ESREL2012), Helsinki, Finland, 2012.'
date_created: 2019-05-13T13:41:34Z
date_updated: 2022-01-06T07:04:20Z
department:
- _id: '151'
keyword:
- Mechatronic Systems
- Principle Solution
- Condition Monitoring
- Conceptual Design
language:
- iso: eng
place: Helsinki, Finland
publication: Proceedings of the 11th International Probabilistic Safety Assessment
  and Management Conference (PSAM11) and The Annual European Safety and Reliability
  Conference (ESREL2012)
quality_controlled: '1'
status: public
title: Conceptual Design of Advanced Condition Monitoring for a Self-Optimizing System
  based on its Principle Solution
type: conference
user_id: '55222'
year: '2012'
...
---
_id: '9806'
abstract:
- lang: eng
  text: Piezoelectric inertia motors, also known as ``stick-slip-drives'', use the
    inertia of a body to drive it by means of a friction contact in small steps. While
    these steps normally involve stiction and sliding, the motors can also operate
    in ``slip-slip'' mode without any phase of static friction. In this contribution,
    a one degree of freedom model of an inertia motor driven by an ideal actuator
    is analysed. Start-up and constant velocity operation of the motor are investigated
    and appropriate quantities to compare ``stick-slip'' and ``slip-slip'' operation
    are determined. Different aspects such as velocity, uniformity of motion, load
    capacity, robustness, efficiency, and wear are considered. The analysis allows
    both modes to be applied advantageously in different applications and can widen
    the field of application of piezoelectric inertia motors. Motor designers are
    enabled to choose the appropriate mode of operation and the best drive parameters
    for their individual applications.
author:
- first_name: Matthias
  full_name: Hunstig, Matthias
  last_name: Hunstig
- first_name: Tobias
  full_name: Hemsel, Tobias
  id: '210'
  last_name: Hemsel
- first_name: Walter
  full_name: Sextro, Walter
  id: '21220'
  last_name: Sextro
citation:
  ama: Hunstig M, Hemsel T, Sextro W. Analysis of different operation modes for inertia
    motors. <i>ACTUATOR 2012 Conference Proceedings</i>. 2012:761-764.
  apa: Hunstig, M., Hemsel, T., &#38; Sextro, W. (2012). Analysis of different operation
    modes for inertia motors. <i>ACTUATOR 2012 Conference Proceedings</i>, 761–764.
  bibtex: '@article{Hunstig_Hemsel_Sextro_2012, title={Analysis of different operation
    modes for inertia motors}, journal={ACTUATOR 2012 Conference Proceedings}, author={Hunstig,
    Matthias and Hemsel, Tobias and Sextro, Walter}, year={2012}, pages={761–764}
    }'
  chicago: Hunstig, Matthias, Tobias Hemsel, and Walter Sextro. “Analysis of Different
    Operation Modes for Inertia Motors.” <i>ACTUATOR 2012 Conference Proceedings</i>,
    2012, 761–64.
  ieee: M. Hunstig, T. Hemsel, and W. Sextro, “Analysis of different operation modes
    for inertia motors,” <i>ACTUATOR 2012 Conference Proceedings</i>, pp. 761–764,
    2012.
  mla: Hunstig, Matthias, et al. “Analysis of Different Operation Modes for Inertia
    Motors.” <i>ACTUATOR 2012 Conference Proceedings</i>, 2012, pp. 761–64.
  short: M. Hunstig, T. Hemsel, W. Sextro, ACTUATOR 2012 Conference Proceedings (2012)
    761–764.
date_created: 2019-05-13T14:11:37Z
date_updated: 2022-01-06T07:04:21Z
department:
- _id: '151'
keyword:
- Piezoelectric Inertia Motors
- Drive Signals
- Stick-slip
- Slip-slip
language:
- iso: eng
page: 761-764
publication: ACTUATOR 2012 Conference Proceedings
quality_controlled: '1'
status: public
title: Analysis of different operation modes for inertia motors
type: journal_article
user_id: '55222'
year: '2012'
...
---
_id: '15888'
author:
- first_name: Juraj
  full_name: Somorovsky, Juraj
  id: '83504'
  last_name: Somorovsky
  orcid: 0000-0002-3593-7720
- first_name: Andreas
  full_name: Mayer, Andreas
  last_name: Mayer
- first_name: Jörg
  full_name: Schwenk, Jörg
  last_name: Schwenk
- first_name: Marco
  full_name: Kampmann, Marco
  last_name: Kampmann
- first_name: Meiko
  full_name: Jensen, Meiko
  last_name: Jensen
citation:
  ama: 'Somorovsky J, Mayer A, Schwenk J, Kampmann M, Jensen M. On Breaking SAML:
    Be Whoever You Want to Be. In: <i>Presented as Part of the 21st {USENIX} Security
    Symposium ({USENIX} Security 12)</i>. Bellevue, WA: {USENIX}; 2012:397-412.'
  apa: 'Somorovsky, J., Mayer, A., Schwenk, J., Kampmann, M., &#38; Jensen, M. (2012).
    On Breaking SAML: Be Whoever You Want to Be. In <i>Presented as part of the 21st
    {USENIX} Security Symposium ({USENIX} Security 12)</i> (pp. 397–412). Bellevue,
    WA: {USENIX}.'
  bibtex: '@inproceedings{Somorovsky_Mayer_Schwenk_Kampmann_Jensen_2012, place={Bellevue,
    WA}, title={On Breaking SAML: Be Whoever You Want to Be}, booktitle={Presented
    as part of the 21st {USENIX} Security Symposium ({USENIX} Security 12)}, publisher={{USENIX}},
    author={Somorovsky, Juraj and Mayer, Andreas and Schwenk, Jörg and Kampmann, Marco
    and Jensen, Meiko}, year={2012}, pages={397–412} }'
  chicago: 'Somorovsky, Juraj, Andreas Mayer, Jörg Schwenk, Marco Kampmann, and Meiko
    Jensen. “On Breaking SAML: Be Whoever You Want to Be.” In <i>Presented as Part
    of the 21st {USENIX} Security Symposium ({USENIX} Security 12)</i>, 397–412. Bellevue,
    WA: {USENIX}, 2012.'
  ieee: 'J. Somorovsky, A. Mayer, J. Schwenk, M. Kampmann, and M. Jensen, “On Breaking
    SAML: Be Whoever You Want to Be,” in <i>Presented as part of the 21st {USENIX}
    Security Symposium ({USENIX} Security 12)</i>, 2012, pp. 397–412.'
  mla: 'Somorovsky, Juraj, et al. “On Breaking SAML: Be Whoever You Want to Be.” <i>Presented
    as Part of the 21st {USENIX} Security Symposium ({USENIX} Security 12)</i>, {USENIX},
    2012, pp. 397–412.'
  short: 'J. Somorovsky, A. Mayer, J. Schwenk, M. Kampmann, M. Jensen, in: Presented
    as Part of the 21st {USENIX} Security Symposium ({USENIX} Security 12), {USENIX},
    Bellevue, WA, 2012, pp. 397–412.'
date_created: 2020-02-15T09:25:51Z
date_updated: 2022-01-06T06:52:39Z
extern: '1'
language:
- iso: eng
main_file_link:
- open_access: '1'
  url: https://www.usenix.org/conference/usenixsecurity12/technical-sessions/presentation/somorovsky
oa: '1'
page: 397-412
place: Bellevue, WA
publication: Presented as part of the 21st {USENIX} Security Symposium ({USENIX} Security
  12)
publication_identifier:
  isbn:
  - 978-931971-95-9
publisher: '{USENIX}'
status: public
title: 'On Breaking SAML: Be Whoever You Want to Be'
type: conference
user_id: '83504'
year: '2012'
...
---
_id: '15981'
author:
- first_name: Thomas
  full_name: Tröster, Thomas
  id: '553'
  last_name: Tröster
- first_name: Thorsten
  full_name: Marten, Thorsten
  id: '338'
  last_name: Marten
- first_name: Dieter
  full_name: Thomas, Dieter
  last_name: Thomas
- first_name: Holger
  full_name: Block, Holger
  last_name: Block
- first_name: Christian
  full_name: Lauter, Christian
  last_name: Lauter
- first_name: Markus
  full_name: Thöne, Markus
  last_name: Thöne
citation:
  ama: Tröster T, Marten T, Thomas D, Block H, Lauter C, Thöne M. Automobilleichtbau
    mit innovativen Werkstoffen und Prozessen. <i>Forschungsforum Paderborn</i>. 2012;15(15/2012):30-38.
  apa: Tröster, T., Marten, T., Thomas, D., Block, H., Lauter, C., &#38; Thöne, M.
    (2012). Automobilleichtbau mit innovativen Werkstoffen und Prozessen. <i>Forschungsforum
    Paderborn</i>, <i>15</i>(15/2012), 30–38.
  bibtex: '@article{Tröster_Marten_Thomas_Block_Lauter_Thöne_2012, title={Automobilleichtbau
    mit innovativen Werkstoffen und Prozessen}, volume={15}, number={15/2012}, journal={Forschungsforum
    Paderborn}, publisher={Universität Paderborn}, author={Tröster, Thomas and Marten,
    Thorsten and Thomas, Dieter and Block, Holger and Lauter, Christian and Thöne,
    Markus}, year={2012}, pages={30–38} }'
  chicago: 'Tröster, Thomas, Thorsten Marten, Dieter Thomas, Holger Block, Christian
    Lauter, and Markus Thöne. “Automobilleichtbau mit innovativen Werkstoffen und
    Prozessen.” <i>Forschungsforum Paderborn</i> 15, no. 15/2012 (2012): 30–38.'
  ieee: T. Tröster, T. Marten, D. Thomas, H. Block, C. Lauter, and M. Thöne, “Automobilleichtbau
    mit innovativen Werkstoffen und Prozessen,” <i>Forschungsforum Paderborn</i>,
    vol. 15, no. 15/2012, pp. 30–38, 2012.
  mla: Tröster, Thomas, et al. “Automobilleichtbau mit innovativen Werkstoffen und
    Prozessen.” <i>Forschungsforum Paderborn</i>, vol. 15, no. 15/2012, Universität
    Paderborn, 2012, pp. 30–38.
  short: T. Tröster, T. Marten, D. Thomas, H. Block, C. Lauter, M. Thöne, Forschungsforum
    Paderborn 15 (2012) 30–38.
date_created: 2020-02-24T08:31:17Z
date_updated: 2022-01-06T06:52:41Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
intvolume: '        15'
issue: 15/2012
language:
- iso: ger
page: 30-38
publication: Forschungsforum Paderborn
publisher: Universität Paderborn
status: public
title: Automobilleichtbau mit innovativen Werkstoffen und Prozessen
type: journal_article
user_id: '72008'
volume: 15
year: '2012'
...
---
_id: '15983'
author:
- first_name: Christian
  full_name: Lauter, Christian
  last_name: Lauter
- first_name: Simon
  full_name: Werneke, Simon
  last_name: Werneke
- first_name: Bernd
  full_name: Siewers, Bernd
  last_name: Siewers
- first_name: Thomas
  full_name: Tröster, Thomas
  id: '553'
  last_name: Tröster
citation:
  ama: Lauter C, Werneke S, Siewers B, Tröster T. Endkonturennahe Fertigung von höchstfesten
    Hybridbauteilen. <i>Lightweight Design</i>. 2012:53-58. doi:<a href="https://doi.org/10.1365/s35725-012-0079-2">10.1365/s35725-012-0079-2</a>
  apa: Lauter, C., Werneke, S., Siewers, B., &#38; Tröster, T. (2012). Endkonturennahe
    Fertigung von höchstfesten Hybridbauteilen. <i>Lightweight Design</i>, 53–58.
    <a href="https://doi.org/10.1365/s35725-012-0079-2">https://doi.org/10.1365/s35725-012-0079-2</a>
  bibtex: '@article{Lauter_Werneke_Siewers_Tröster_2012, title={Endkonturennahe Fertigung
    von höchstfesten Hybridbauteilen}, DOI={<a href="https://doi.org/10.1365/s35725-012-0079-2">10.1365/s35725-012-0079-2</a>},
    journal={Lightweight Design}, author={Lauter, Christian and Werneke, Simon and
    Siewers, Bernd and Tröster, Thomas}, year={2012}, pages={53–58} }'
  chicago: Lauter, Christian, Simon Werneke, Bernd Siewers, and Thomas Tröster. “Endkonturennahe
    Fertigung von höchstfesten Hybridbauteilen.” <i>Lightweight Design</i>, 2012,
    53–58. <a href="https://doi.org/10.1365/s35725-012-0079-2">https://doi.org/10.1365/s35725-012-0079-2</a>.
  ieee: C. Lauter, S. Werneke, B. Siewers, and T. Tröster, “Endkonturennahe Fertigung
    von höchstfesten Hybridbauteilen,” <i>Lightweight Design</i>, pp. 53–58, 2012.
  mla: Lauter, Christian, et al. “Endkonturennahe Fertigung von höchstfesten Hybridbauteilen.”
    <i>Lightweight Design</i>, 2012, pp. 53–58, doi:<a href="https://doi.org/10.1365/s35725-012-0079-2">10.1365/s35725-012-0079-2</a>.
  short: C. Lauter, S. Werneke, B. Siewers, T. Tröster, Lightweight Design (2012)
    53–58.
date_created: 2020-02-24T08:34:12Z
date_updated: 2022-01-06T06:52:41Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
doi: 10.1365/s35725-012-0079-2
language:
- iso: ger
page: 53-58
publication: Lightweight Design
publication_identifier:
  issn:
  - 1865-4819
  - 2192-8738
publication_status: published
status: public
title: Endkonturennahe Fertigung von höchstfesten Hybridbauteilen
type: journal_article
user_id: '72008'
year: '2012'
...
---
_id: '15985'
author:
- first_name: Corin
  full_name: Reuter, Corin
  last_name: Reuter
- first_name: Meike
  full_name: Frantz, Meike
  last_name: Frantz
- first_name: Christian
  full_name: Lauter, Christian
  last_name: Lauter
- first_name: Holger
  full_name: Block, Holger
  last_name: Block
- first_name: Thomas
  full_name: Tröster, Thomas
  id: '553'
  last_name: Tröster
citation:
  ama: 'Reuter C, Frantz M, Lauter C, Block H, Tröster T. Simulation and testing of
    hybrid structures consisting of press-hardened steel and CFRP. In: ; 2012.'
  apa: Reuter, C., Frantz, M., Lauter, C., Block, H., &#38; Tröster, T. (2012). Simulation
    and testing of hybrid structures consisting of press-hardened steel and CFRP.
    Presented at the 1st International Conference on Mechanics of Nano, Micro and
    Macro Composite Structures (ICNMMCS), Turin, Italy.
  bibtex: '@inproceedings{Reuter_Frantz_Lauter_Block_Tröster_2012, title={Simulation
    and testing of hybrid structures consisting of press-hardened steel and CFRP},
    author={Reuter, Corin and Frantz, Meike and Lauter, Christian and Block, Holger
    and Tröster, Thomas}, year={2012} }'
  chicago: Reuter, Corin, Meike Frantz, Christian Lauter, Holger Block, and Thomas
    Tröster. “Simulation and Testing of Hybrid Structures Consisting of Press-Hardened
    Steel and CFRP,” 2012.
  ieee: C. Reuter, M. Frantz, C. Lauter, H. Block, and T. Tröster, “Simulation and
    testing of hybrid structures consisting of press-hardened steel and CFRP,” presented
    at the 1st International Conference on Mechanics of Nano, Micro and Macro Composite
    Structures (ICNMMCS), Turin, Italy, 2012.
  mla: Reuter, Corin, et al. <i>Simulation and Testing of Hybrid Structures Consisting
    of Press-Hardened Steel and CFRP</i>. 2012.
  short: 'C. Reuter, M. Frantz, C. Lauter, H. Block, T. Tröster, in: 2012.'
conference:
  end_date: 2012-06-20
  location: Turin, Italy
  name: 1st International Conference on Mechanics of Nano, Micro and Macro Composite
    Structures (ICNMMCS)
  start_date: 2012-06-18
date_created: 2020-02-24T08:48:14Z
date_updated: 2022-01-06T06:52:41Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: eng
project:
- _id: '52'
  name: Computing Resources Provided by the Paderborn Center for Parallel Computing
status: public
title: Simulation and testing of hybrid structures consisting of press-hardened steel
  and CFRP
type: conference
user_id: '72008'
year: '2012'
...
---
_id: '15987'
author:
- first_name: Christian
  full_name: Lauter, Christian
  last_name: Lauter
- first_name: Meike
  full_name: Frantz, Meike
  last_name: Frantz
- first_name: J. P.
  full_name: Kohler, J. P.
  last_name: Kohler
- first_name: Thomas
  full_name: Tröster, Thomas
  id: '553'
  last_name: Tröster
citation:
  ama: 'Lauter C, Frantz M, Kohler JP, Tröster T. Crash tests of hybrid structures
    consisting of sheet metal and local CFRP reinforcements. In: ; 2012.'
  apa: Lauter, C., Frantz, M., Kohler, J. P., &#38; Tröster, T. (2012). Crash tests
    of hybrid structures consisting of sheet metal and local CFRP reinforcements.
    Presented at the 15th European Conference on Composite Materials (ECCM15), Venice,
    Italy.
  bibtex: '@inproceedings{Lauter_Frantz_Kohler_Tröster_2012, title={Crash tests of
    hybrid structures consisting of sheet metal and local CFRP reinforcements}, author={Lauter,
    Christian and Frantz, Meike and Kohler, J. P. and Tröster, Thomas}, year={2012}
    }'
  chicago: Lauter, Christian, Meike Frantz, J. P. Kohler, and Thomas Tröster. “Crash
    Tests of Hybrid Structures Consisting of Sheet Metal and Local CFRP Reinforcements,”
    2012.
  ieee: C. Lauter, M. Frantz, J. P. Kohler, and T. Tröster, “Crash tests of hybrid
    structures consisting of sheet metal and local CFRP reinforcements,” presented
    at the 15th European Conference on Composite Materials (ECCM15), Venice, Italy,
    2012.
  mla: Lauter, Christian, et al. <i>Crash Tests of Hybrid Structures Consisting of
    Sheet Metal and Local CFRP Reinforcements</i>. 2012.
  short: 'C. Lauter, M. Frantz, J.P. Kohler, T. Tröster, in: 2012.'
conference:
  end_date: 2012-06-28
  location: Venice, Italy
  name: 15th European Conference on Composite Materials (ECCM15)
  start_date: 2012-06-24
date_created: 2020-02-24T08:58:53Z
date_updated: 2022-01-06T06:52:41Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: eng
project:
- _id: '52'
  name: Computing Resources Provided by the Paderborn Center for Parallel Computing
status: public
title: Crash tests of hybrid structures consisting of sheet metal and local CFRP reinforcements
type: conference
user_id: '72008'
year: '2012'
...
---
_id: '15988'
author:
- first_name: Christian
  full_name: Lauter, Christian
  last_name: Lauter
- first_name: M.
  full_name: Sarrazin, M.
  last_name: Sarrazin
- first_name: Thomas
  full_name: Tröster, Thomas
  id: '553'
  last_name: Tröster
citation:
  ama: 'Lauter C, Sarrazin M, Tröster T. Joining technologies for hybrid materials
    consisting of sheet metal and carbon fibre reinforced plastics. In: ; 2012.'
  apa: Lauter, C., Sarrazin, M., &#38; Tröster, T. (2012). Joining technologies for
    hybrid materials consisting of sheet metal and carbon fibre reinforced plastics.
    Presented at the 1st International Conference of the International Journal of
    Structural Integrity (IJSI), Porto, Portugal.
  bibtex: '@inproceedings{Lauter_Sarrazin_Tröster_2012, title={Joining technologies
    for hybrid materials consisting of sheet metal and carbon fibre reinforced plastics},
    author={Lauter, Christian and Sarrazin, M. and Tröster, Thomas}, year={2012} }'
  chicago: Lauter, Christian, M. Sarrazin, and Thomas Tröster. “Joining Technologies
    for Hybrid Materials Consisting of Sheet Metal and Carbon Fibre Reinforced Plastics,”
    2012.
  ieee: C. Lauter, M. Sarrazin, and T. Tröster, “Joining technologies for hybrid materials
    consisting of sheet metal and carbon fibre reinforced plastics,” presented at
    the 1st International Conference of the International Journal of Structural Integrity
    (IJSI), Porto, Portugal, 2012.
  mla: Lauter, Christian, et al. <i>Joining Technologies for Hybrid Materials Consisting
    of Sheet Metal and Carbon Fibre Reinforced Plastics</i>. 2012.
  short: 'C. Lauter, M. Sarrazin, T. Tröster, in: 2012.'
conference:
  end_date: 2012-06-28
  location: Porto, Portugal
  name: 1st International Conference of the International Journal of Structural Integrity
    (IJSI)
  start_date: 2012-06-25
date_created: 2020-02-24T09:01:31Z
date_updated: 2022-01-06T06:52:41Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: eng
status: public
title: Joining technologies for hybrid materials consisting of sheet metal and carbon
  fibre reinforced plastics
type: conference
user_id: '72008'
year: '2012'
...
---
_id: '15989'
author:
- first_name: Leif
  full_name: Ickert, Leif
  last_name: Ickert
- first_name: Dieter
  full_name: Thomas, Dieter
  last_name: Thomas
- first_name: Thomas
  full_name: Tröster, Thomas
  id: '553'
  last_name: Tröster
- first_name: Lutz
  full_name: Eckstein, Lutz
  last_name: Eckstein
citation:
  ama: Ickert L, Thomas D, Tröster T, Eckstein L. Beitrag zum Fortschritt im Automobilleichtbau
    durch belastungsgerechte Gestaltung und innovative Lösungen für lokale Verstärkungen
    von Fahrzeugstrukturen in Mischbauweise. <i>FAT-Schriftenreihe 244</i>. 2012;(244).
  apa: Ickert, L., Thomas, D., Tröster, T., &#38; Eckstein, L. (2012). Beitrag zum
    Fortschritt im Automobilleichtbau durch belastungsgerechte Gestaltung und innovative
    Lösungen für lokale Verstärkungen von Fahrzeugstrukturen in Mischbauweise. <i>FAT-Schriftenreihe
    244</i>, (244).
  bibtex: '@article{Ickert_Thomas_Tröster_Eckstein_2012, title={Beitrag zum Fortschritt
    im Automobilleichtbau durch belastungsgerechte Gestaltung und innovative Lösungen
    für lokale Verstärkungen von Fahrzeugstrukturen in Mischbauweise}, number={244},
    journal={FAT-Schriftenreihe 244}, publisher={Forschungsvereinigung Automobiltechnik
    e.V.}, author={Ickert, Leif and Thomas, Dieter and Tröster, Thomas and Eckstein,
    Lutz}, year={2012} }'
  chicago: Ickert, Leif, Dieter Thomas, Thomas Tröster, and Lutz Eckstein. “Beitrag
    zum Fortschritt im Automobilleichtbau durch belastungsgerechte Gestaltung und
    innovative Lösungen für lokale Verstärkungen von Fahrzeugstrukturen in Mischbauweise.”
    <i>FAT-Schriftenreihe 244</i>, no. 244 (2012).
  ieee: L. Ickert, D. Thomas, T. Tröster, and L. Eckstein, “Beitrag zum Fortschritt
    im Automobilleichtbau durch belastungsgerechte Gestaltung und innovative Lösungen
    für lokale Verstärkungen von Fahrzeugstrukturen in Mischbauweise,” <i>FAT-Schriftenreihe
    244</i>, no. 244, 2012.
  mla: Ickert, Leif, et al. “Beitrag zum Fortschritt im Automobilleichtbau durch belastungsgerechte
    Gestaltung und innovative Lösungen für lokale Verstärkungen von Fahrzeugstrukturen
    in Mischbauweise.” <i>FAT-Schriftenreihe 244</i>, no. 244, Forschungsvereinigung
    Automobiltechnik e.V., 2012.
  short: L. Ickert, D. Thomas, T. Tröster, L. Eckstein, FAT-Schriftenreihe 244 (2012).
date_created: 2020-02-24T09:10:51Z
date_updated: 2022-01-06T06:52:41Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
issue: '244'
language:
- iso: ger
publication: FAT-Schriftenreihe 244
publication_identifier:
  issn:
  - 2192-7863
publisher: Forschungsvereinigung Automobiltechnik e.V.
status: public
title: Beitrag zum Fortschritt im Automobilleichtbau durch belastungsgerechte Gestaltung
  und innovative Lösungen für lokale Verstärkungen von Fahrzeugstrukturen in Mischbauweise
type: journal_article
user_id: '72008'
year: '2012'
...
---
_id: '16004'
author:
- first_name: Christian
  full_name: Lauter, Christian
  last_name: Lauter
- first_name: Bernd
  full_name: Siewers, Bernd
  last_name: Siewers
- first_name: B.
  full_name: Zanft, B.
  last_name: Zanft
- first_name: Thomas
  full_name: Tröster, Thomas
  id: '553'
  last_name: Tröster
citation:
  ama: 'Lauter C, Siewers B, Zanft B, Tröster T. Crash worthiness of hybrid pillar
    structures consisting of sheet metal and local CFRP reinforcements. In: ; 2012.'
  apa: Lauter, C., Siewers, B., Zanft, B., &#38; Tröster, T. (2012). Crash worthiness
    of hybrid pillar structures consisting of sheet metal and local CFRP reinforcements.
    Presented at the 15th International Conference on Experimental Mechanics (ICEM15),
    Porto .
  bibtex: '@inproceedings{Lauter_Siewers_Zanft_Tröster_2012, title={Crash worthiness
    of hybrid pillar structures consisting of sheet metal and local CFRP reinforcements},
    author={Lauter, Christian and Siewers, Bernd and Zanft, B. and Tröster, Thomas},
    year={2012} }'
  chicago: Lauter, Christian, Bernd Siewers, B. Zanft, and Thomas Tröster. “Crash
    Worthiness of Hybrid Pillar Structures Consisting of Sheet Metal and Local CFRP
    Reinforcements,” 2012.
  ieee: C. Lauter, B. Siewers, B. Zanft, and T. Tröster, “Crash worthiness of hybrid
    pillar structures consisting of sheet metal and local CFRP reinforcements,” presented
    at the 15th International Conference on Experimental Mechanics (ICEM15), Porto
    , 2012.
  mla: Lauter, Christian, et al. <i>Crash Worthiness of Hybrid Pillar Structures Consisting
    of Sheet Metal and Local CFRP Reinforcements</i>. 2012.
  short: 'C. Lauter, B. Siewers, B. Zanft, T. Tröster, in: 2012.'
conference:
  end_date: 2012-07-27
  location: 'Porto '
  name: 15th International Conference on Experimental Mechanics (ICEM15)
  start_date: 2012-07-22
date_created: 2020-02-24T10:43:55Z
date_updated: 2022-01-06T06:52:42Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: eng
status: public
title: Crash worthiness of hybrid pillar structures consisting of sheet metal and
  local CFRP reinforcements
type: conference
user_id: '72008'
year: '2012'
...
---
_id: '16007'
author:
- first_name: M.
  full_name: Thöne, M.
  last_name: Thöne
- first_name: S.
  full_name: Leuders, S.
  last_name: Leuders
- first_name: A.
  full_name: Riemer, A.
  last_name: Riemer
- first_name: Thomas
  full_name: Tröster, Thomas
  id: '553'
  last_name: Tröster
- first_name: H. A.
  full_name: Richard, H. A.
  last_name: Richard
citation:
  ama: 'Thöne M, Leuders S, Riemer A, Tröster T, Richard HA. Influence of heat-treatment
    on Selective Laser Melting products - e.g. Ti6Al4V. In: ; 2012.'
  apa: Thöne, M., Leuders, S., Riemer, A., Tröster, T., &#38; Richard, H. A. (2012).
    Influence of heat-treatment on Selective Laser Melting products - e.g. Ti6Al4V.
    Presented at the Solid Freeform Fabrication Symposium, Austin, Texas, USA.
  bibtex: '@inproceedings{Thöne_Leuders_Riemer_Tröster_Richard_2012, title={Influence
    of heat-treatment on Selective Laser Melting products - e.g. Ti6Al4V}, author={Thöne,
    M. and Leuders, S. and Riemer, A. and Tröster, Thomas and Richard, H. A.}, year={2012}
    }'
  chicago: Thöne, M., S. Leuders, A. Riemer, Thomas Tröster, and H. A. Richard. “Influence
    of Heat-Treatment on Selective Laser Melting Products - e.g. Ti6Al4V,” 2012.
  ieee: M. Thöne, S. Leuders, A. Riemer, T. Tröster, and H. A. Richard, “Influence
    of heat-treatment on Selective Laser Melting products - e.g. Ti6Al4V,” presented
    at the Solid Freeform Fabrication Symposium, Austin, Texas, USA, 2012.
  mla: Thöne, M., et al. <i>Influence of Heat-Treatment on Selective Laser Melting
    Products - e.g. Ti6Al4V</i>. 2012.
  short: 'M. Thöne, S. Leuders, A. Riemer, T. Tröster, H.A. Richard, in: 2012.'
conference:
  end_date: 2012-08-08
  location: Austin, Texas, USA
  name: Solid Freeform Fabrication Symposium
  start_date: 2012-08-06
date_created: 2020-02-24T12:00:43Z
date_updated: 2022-01-06T06:52:42Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: eng
status: public
title: Influence of heat-treatment on Selective Laser Melting products - e.g. Ti6Al4V
type: conference
user_id: '72008'
year: '2012'
...
---
_id: '16008'
author:
- first_name: A.
  full_name: Riemer, A.
  last_name: Riemer
- first_name: S.
  full_name: Leuders, S.
  last_name: Leuders
- first_name: Thomas
  full_name: Tröster, Thomas
  id: '553'
  last_name: Tröster
- first_name: H. A.
  full_name: Richard, H. A.
  last_name: Richard
citation:
  ama: Riemer A, Leuders S, Tröster T, Richard HA. Untersuchung zyklisch belasteter
    SLM-Bauteile aus der Titan-Aluminium-Legierung TiAl6V4. <i>DVM-Bericht 139, Werkstoffe
    und Fügeverfahren - Neue Herausforderungen für die Betriebsfestigkeit</i>. 2012.
  apa: Riemer, A., Leuders, S., Tröster, T., &#38; Richard, H. A. (2012). Untersuchung
    zyklisch belasteter SLM-Bauteile aus der Titan-Aluminium-Legierung TiAl6V4. <i>DVM-Bericht
    139, Werkstoffe und Fügeverfahren - Neue Herausforderungen für die Betriebsfestigkeit</i>.
  bibtex: '@article{Riemer_Leuders_Tröster_Richard_2012, title={Untersuchung zyklisch
    belasteter SLM-Bauteile aus der Titan-Aluminium-Legierung TiAl6V4}, journal={DVM-Bericht
    139, Werkstoffe und Fügeverfahren - Neue Herausforderungen für die Betriebsfestigkeit},
    publisher={Deutscher Verband für Materialforschung und -prüfung e.V.}, author={Riemer,
    A. and Leuders, S. and Tröster, Thomas and Richard, H. A.}, year={2012} }'
  chicago: Riemer, A., S. Leuders, Thomas Tröster, and H. A. Richard. “Untersuchung
    zyklisch belasteter SLM-Bauteile aus der Titan-Aluminium-Legierung TiAl6V4.” <i>DVM-Bericht
    139, Werkstoffe und Fügeverfahren - Neue Herausforderungen für die Betriebsfestigkeit</i>,
    2012.
  ieee: A. Riemer, S. Leuders, T. Tröster, and H. A. Richard, “Untersuchung zyklisch
    belasteter SLM-Bauteile aus der Titan-Aluminium-Legierung TiAl6V4,” <i>DVM-Bericht
    139, Werkstoffe und Fügeverfahren - Neue Herausforderungen für die Betriebsfestigkeit</i>,
    2012.
  mla: Riemer, A., et al. “Untersuchung zyklisch belasteter SLM-Bauteile aus der Titan-Aluminium-Legierung
    TiAl6V4.” <i>DVM-Bericht 139, Werkstoffe und Fügeverfahren - Neue Herausforderungen
    für die Betriebsfestigkeit</i>, Deutscher Verband für Materialforschung und -prüfung
    e.V., 2012.
  short: A. Riemer, S. Leuders, T. Tröster, H.A. Richard, DVM-Bericht 139, Werkstoffe
    und Fügeverfahren - Neue Herausforderungen für die Betriebsfestigkeit (2012).
date_created: 2020-02-24T12:15:35Z
date_updated: 2022-01-06T06:52:42Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: ger
publication: DVM-Bericht 139, Werkstoffe und Fügeverfahren - Neue Herausforderungen
  für die Betriebsfestigkeit
publisher: Deutscher Verband für Materialforschung und -prüfung e.V.
status: public
title: Untersuchung zyklisch belasteter SLM-Bauteile aus der Titan-Aluminium-Legierung
  TiAl6V4
type: journal_article
user_id: '72008'
year: '2012'
...
---
_id: '16009'
author:
- first_name: S.
  full_name: Leuders, S.
  last_name: Leuders
- first_name: A.
  full_name: Riemer, A.
  last_name: Riemer
- first_name: Thomas
  full_name: Tröster, Thomas
  id: '553'
  last_name: Tröster
- first_name: H. A.
  full_name: Richard, H. A.
  last_name: Richard
citation:
  ama: 'Leuders S, Riemer A, Tröster T, Richard HA. Characterization and Comparison
    of Mechanical Properties of SLM Materials with Regard to Process Cycle Time Improvement.
    In: ; 2012.'
  apa: Leuders, S., Riemer, A., Tröster, T., &#38; Richard, H. A. (2012). Characterization
    and Comparison of Mechanical Properties of SLM Materials with Regard to Process
    Cycle Time Improvement. Presented at the 1st International Conference on Thermo-Mechanically
    Graded Materials, Kassel.
  bibtex: '@inproceedings{Leuders_Riemer_Tröster_Richard_2012, title={Characterization
    and Comparison of Mechanical Properties of SLM Materials with Regard to Process
    Cycle Time Improvement}, author={Leuders, S. and Riemer, A. and Tröster, Thomas
    and Richard, H. A.}, year={2012} }'
  chicago: Leuders, S., A. Riemer, Thomas Tröster, and H. A. Richard. “Characterization
    and Comparison of Mechanical Properties of SLM Materials with Regard to Process
    Cycle Time Improvement,” 2012.
  ieee: S. Leuders, A. Riemer, T. Tröster, and H. A. Richard, “Characterization and
    Comparison of Mechanical Properties of SLM Materials with Regard to Process Cycle
    Time Improvement,” presented at the 1st International Conference on Thermo-Mechanically
    Graded Materials, Kassel, 2012.
  mla: Leuders, S., et al. <i>Characterization and Comparison of Mechanical Properties
    of SLM Materials with Regard to Process Cycle Time Improvement</i>. 2012.
  short: 'S. Leuders, A. Riemer, T. Tröster, H.A. Richard, in: 2012.'
conference:
  end_date: 2012-10-30
  location: Kassel
  name: 1st International Conference on Thermo-Mechanically Graded Materials
  start_date: 2012-10-29
date_created: 2020-02-24T12:25:44Z
date_updated: 2022-01-06T06:52:42Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: eng
status: public
title: Characterization and Comparison of Mechanical Properties of SLM Materials with
  Regard to Process Cycle Time Improvement
type: conference
user_id: '72008'
year: '2012'
...