---
_id: '9772'
abstract:
- lang: eng
  text: 'A profound description of friction in wheel--rail contact plays an essential
    role for optimization of traction control strategies, as input quantity for railway
    simulations in general and for the estimation of wear and rolling contact fatigue.
    A multitude of wheel--rail contact models exists, however, traction--creepage
    curves obtained from measurements show quantitative and qualitative deviations.
    There are several phenomena which influence the traction--creepage characteristics:
    Mechanisms resulting from surface roughness, frictional heating or the presence
    of interfacial fluids can have a dominating influence on friction. In this paper,
    a new wheel--rail contact model, accounting for these influential parameters,
    will be presented. The presented model accounts for the interaction of an interfacial
    fluid model for combined boundary and mixed lubrication of rough surfaces with
    a wheel--rail contact model that additionally accounts for frictional heating.
    A quantitative comparison with measurements found in the literature is not conducted,
    since the exact conditions of the measurements are mostly unknown and parameters
    can easily be adjusted to fit the measurements. Emphasis is placed on the qualitative
    behavior of the model with respect to the measurements and good agreement is found.
    The dependence of the maximum traction coefficient on rolling velocity, surface
    roughness and normal load is studied under dry and water lubricated conditions.'
author:
- first_name: Christoph
  full_name: Tomberger, Christoph
  last_name: Tomberger
- first_name: Peter
  full_name: Dietmaier, Peter
  last_name: Dietmaier
- first_name: Walter
  full_name: Sextro, Walter
  id: '21220'
  last_name: Sextro
- first_name: Klaus
  full_name: Six, Klaus
  last_name: Six
citation:
  ama: 'Tomberger C, Dietmaier P, Sextro W, Six K. Friction in wheel--rail contact:
    A model comprising interfacial fluids, surface roughness and temperature. <i>Wear</i>.
    2011;271:2-12. doi:<a href="https://doi.org/10.1016/j.wear.2010.10.025">10.1016/j.wear.2010.10.025</a>'
  apa: 'Tomberger, C., Dietmaier, P., Sextro, W., &#38; Six, K. (2011). Friction in
    wheel--rail contact: A model comprising interfacial fluids, surface roughness
    and temperature. <i>Wear</i>, <i>271</i>, 2–12. <a href="https://doi.org/10.1016/j.wear.2010.10.025">https://doi.org/10.1016/j.wear.2010.10.025</a>'
  bibtex: '@article{Tomberger_Dietmaier_Sextro_Six_2011, title={Friction in wheel--rail
    contact: A model comprising interfacial fluids, surface roughness and temperature},
    volume={271}, DOI={<a href="https://doi.org/10.1016/j.wear.2010.10.025">10.1016/j.wear.2010.10.025</a>},
    journal={Wear}, author={Tomberger, Christoph and Dietmaier, Peter and Sextro,
    Walter and Six, Klaus}, year={2011}, pages={2–12} }'
  chicago: 'Tomberger, Christoph, Peter Dietmaier, Walter Sextro, and Klaus Six. “Friction
    in Wheel--Rail Contact: A Model Comprising Interfacial Fluids, Surface Roughness
    and Temperature.” <i>Wear</i> 271 (2011): 2–12. <a href="https://doi.org/10.1016/j.wear.2010.10.025">https://doi.org/10.1016/j.wear.2010.10.025</a>.'
  ieee: 'C. Tomberger, P. Dietmaier, W. Sextro, and K. Six, “Friction in wheel--rail
    contact: A model comprising interfacial fluids, surface roughness and temperature,”
    <i>Wear</i>, vol. 271, pp. 2–12, 2011.'
  mla: 'Tomberger, Christoph, et al. “Friction in Wheel--Rail Contact: A Model Comprising
    Interfacial Fluids, Surface Roughness and Temperature.” <i>Wear</i>, vol. 271,
    2011, pp. 2–12, doi:<a href="https://doi.org/10.1016/j.wear.2010.10.025">10.1016/j.wear.2010.10.025</a>.'
  short: C. Tomberger, P. Dietmaier, W. Sextro, K. Six, Wear 271 (2011) 2–12.
date_created: 2019-05-13T11:08:32Z
date_updated: 2022-01-06T07:04:19Z
department:
- _id: '151'
doi: 10.1016/j.wear.2010.10.025
intvolume: '       271'
keyword:
- Wheel--rail contact
- Rolling contact
- Friction
- Interfacial fluid
- Lubrication
- Surface roughness
- Contact temperature
language:
- iso: eng
page: 2 - 12
publication: Wear
publication_identifier:
  issn:
  - 0043-1648
quality_controlled: '1'
status: public
title: 'Friction in wheel--rail contact: A model comprising interfacial fluids, surface
  roughness and temperature'
type: journal_article
user_id: '55222'
volume: 271
year: '2011'
...
---
_id: '9877'
author:
- first_name: Gaku
  full_name: Isobe, Gaku
  last_name: Isobe
- first_name: Peter
  full_name: Bornmann, Peter
  last_name: Bornmann
- first_name: Tobias
  full_name: Hemsel, Tobias
  id: '210'
  last_name: Hemsel
- first_name: Takeshi
  full_name: Morita, Takeshi
  last_name: Morita
citation:
  ama: Isobe G, Bornmann P, Hemsel T, Morita T. High temperature tolerant transducer
    for Ultrasonic Assisted Hydrothermal Method. <i>Proceedings of Symposium on Ultrasonic
    Electronics</i>. 2011;32:19-20.
  apa: Isobe, G., Bornmann, P., Hemsel, T., &#38; Morita, T. (2011). High temperature
    tolerant transducer for Ultrasonic Assisted Hydrothermal Method. <i>Proceedings
    of Symposium on Ultrasonic Electronics</i>, <i>32</i>, 19–20.
  bibtex: '@article{Isobe_Bornmann_Hemsel_Morita_2011, title={High temperature tolerant
    transducer for Ultrasonic Assisted Hydrothermal Method}, volume={32}, journal={Proceedings
    of Symposium on Ultrasonic Electronics}, publisher={Trans Tech Publ}, author={Isobe,
    Gaku and Bornmann, Peter and Hemsel, Tobias and Morita, Takeshi}, year={2011},
    pages={19–20} }'
  chicago: 'Isobe, Gaku, Peter Bornmann, Tobias Hemsel, and Takeshi Morita. “High
    Temperature Tolerant Transducer for Ultrasonic Assisted Hydrothermal Method.”
    <i>Proceedings of Symposium on Ultrasonic Electronics</i> 32 (2011): 19–20.'
  ieee: G. Isobe, P. Bornmann, T. Hemsel, and T. Morita, “High temperature tolerant
    transducer for Ultrasonic Assisted Hydrothermal Method,” <i>Proceedings of Symposium
    on Ultrasonic Electronics</i>, vol. 32, pp. 19–20, 2011.
  mla: Isobe, Gaku, et al. “High Temperature Tolerant Transducer for Ultrasonic Assisted
    Hydrothermal Method.” <i>Proceedings of Symposium on Ultrasonic Electronics</i>,
    vol. 32, Trans Tech Publ, 2011, pp. 19–20.
  short: G. Isobe, P. Bornmann, T. Hemsel, T. Morita, Proceedings of Symposium on
    Ultrasonic Electronics 32 (2011) 19–20.
date_created: 2019-05-20T13:09:04Z
date_updated: 2019-09-16T11:31:38Z
department:
- _id: '151'
intvolume: '        32'
language:
- iso: eng
page: 19-20
publication: Proceedings of Symposium on Ultrasonic Electronics
publisher: Trans Tech Publ
quality_controlled: '1'
status: public
title: High temperature tolerant transducer for Ultrasonic Assisted Hydrothermal Method
type: journal_article
user_id: '55222'
volume: 32
year: '2011'
...
---
_id: '4157'
author:
- first_name: Burkhard
  full_name: Hehenkamp, Burkhard
  id: '37339'
  last_name: Hehenkamp
- first_name: Oddvar
  full_name: Kaarboe, Oddvar
  last_name: Kaarboe
citation:
  ama: Hehenkamp B, Kaarboe O. Paying for Performance in Hospitals. <i>Economic Analysis
    and Policy</i>. 2011;41(1):49-70. doi:<a href="https://doi.org/10.1016/s0313-5926(11)50004-9">10.1016/s0313-5926(11)50004-9</a>
  apa: Hehenkamp, B., &#38; Kaarboe, O. (2011). Paying for Performance in Hospitals.
    <i>Economic Analysis and Policy</i>, <i>41</i>(1), 49–70. <a href="https://doi.org/10.1016/s0313-5926(11)50004-9">https://doi.org/10.1016/s0313-5926(11)50004-9</a>
  bibtex: '@article{Hehenkamp_Kaarboe_2011, title={Paying for Performance in Hospitals},
    volume={41}, DOI={<a href="https://doi.org/10.1016/s0313-5926(11)50004-9">10.1016/s0313-5926(11)50004-9</a>},
    number={1}, journal={Economic Analysis and Policy}, publisher={Elsevier BV}, author={Hehenkamp,
    Burkhard and Kaarboe, Oddvar}, year={2011}, pages={49–70} }'
  chicago: 'Hehenkamp, Burkhard, and Oddvar Kaarboe. “Paying for Performance in Hospitals.”
    <i>Economic Analysis and Policy</i> 41, no. 1 (2011): 49–70. <a href="https://doi.org/10.1016/s0313-5926(11)50004-9">https://doi.org/10.1016/s0313-5926(11)50004-9</a>.'
  ieee: B. Hehenkamp and O. Kaarboe, “Paying for Performance in Hospitals,” <i>Economic
    Analysis and Policy</i>, vol. 41, no. 1, pp. 49–70, 2011.
  mla: Hehenkamp, Burkhard, and Oddvar Kaarboe. “Paying for Performance in Hospitals.”
    <i>Economic Analysis and Policy</i>, vol. 41, no. 1, Elsevier BV, 2011, pp. 49–70,
    doi:<a href="https://doi.org/10.1016/s0313-5926(11)50004-9">10.1016/s0313-5926(11)50004-9</a>.
  short: B. Hehenkamp, O. Kaarboe, Economic Analysis and Policy 41 (2011) 49–70.
date_created: 2018-08-27T15:08:06Z
date_updated: 2022-01-06T07:00:26Z
department:
- _id: '280'
- _id: '475'
doi: 10.1016/s0313-5926(11)50004-9
extern: '1'
intvolume: '        41'
issue: '1'
page: 49-70
publication: Economic Analysis and Policy
publication_identifier:
  issn:
  - 0313-5926
publication_status: published
publisher: Elsevier BV
status: public
title: Paying for Performance in Hospitals
type: journal_article
user_id: '37339'
volume: 41
year: '2011'
...
---
_id: '650'
author:
- first_name: Marie Christin
  full_name: Platenius, Marie Christin
  last_name: Platenius
citation:
  ama: Platenius MC. <i>Reengineering of Design Deficiencies in Component-Based Software
    Architectures</i>. Universität Paderborn; 2011.
  apa: Platenius, M. C. (2011). <i>Reengineering of Design Deficiencies in Component-Based
    Software Architectures</i>. Universität Paderborn.
  bibtex: '@book{Platenius_2011, title={Reengineering of Design Deficiencies in Component-Based
    Software Architectures}, publisher={Universität Paderborn}, author={Platenius,
    Marie Christin}, year={2011} }'
  chicago: Platenius, Marie Christin. <i>Reengineering of Design Deficiencies in Component-Based
    Software Architectures</i>. Universität Paderborn, 2011.
  ieee: M. C. Platenius, <i>Reengineering of Design Deficiencies in Component-Based
    Software Architectures</i>. Universität Paderborn, 2011.
  mla: Platenius, Marie Christin. <i>Reengineering of Design Deficiencies in Component-Based
    Software Architectures</i>. Universität Paderborn, 2011.
  short: M.C. Platenius, Reengineering of Design Deficiencies in Component-Based Software
    Architectures, Universität Paderborn, 2011.
date_created: 2017-10-17T12:42:58Z
date_updated: 2022-01-06T07:03:08Z
department:
- _id: '76'
language:
- iso: eng
project:
- _id: '1'
  name: SFB 901
- _id: '9'
  name: SFB 901 - Subprojekt B1
- _id: '3'
  name: SFB 901 - Project Area B
publisher: Universität Paderborn
status: public
title: Reengineering of Design Deficiencies in Component-Based Software Architectures
type: mastersthesis
user_id: '477'
year: '2011'
...
---
_id: '652'
abstract:
- lang: eng
  text: In the development process of service-oriented systems, business process models
    are used at different levels. Typically, high-level business process models that
    describe business requirements and needs are stepwise refined to the IT level
    by different business modelers and software architects. As a result, different
    process model versions must be compared and merged by means of model version control.
    An important prerequisite for process model version control is an elaborated matching
    approach that results in precise mappings between different process model versions.
    The challenge of such an approach is to deal with syntactically different process
    models that are semantically equivalent. For that purpose, matching techniques
    must consider the semantics of process modeling languages.In this paper, we present
    a matching approach for process models in a versioning scenario. Based on a term
    formalization of process models, we enable an efficient and effective way to match
    syntactically different but semantically equivalent process models resulting in
    precise mappings.
author:
- first_name: Christian
  full_name: Gerth, Christian
  last_name: Gerth
- first_name: Markus
  full_name: Luckey, Markus
  last_name: Luckey
- first_name: Jochen
  full_name: Küster, Jochen
  last_name: Küster
- first_name: Gregor
  full_name: Engels, Gregor
  id: '107'
  last_name: Engels
citation:
  ama: 'Gerth C, Luckey M, Küster J, Engels G. Precise Mappings between Business Process
    Models in Versioning Scenarios. In: <i>Proceedings of the IEEE 8th International
    Conference on Service Computingt (SCC)</i>. ; 2011:218--225. doi:<a href="https://doi.org/10.1109/SCC.2011.65">10.1109/SCC.2011.65</a>'
  apa: Gerth, C., Luckey, M., Küster, J., &#38; Engels, G. (2011). Precise Mappings
    between Business Process Models in Versioning Scenarios. In <i>Proceedings of
    the IEEE 8th International Conference on Service Computingt (SCC)</i> (pp. 218--225).
    <a href="https://doi.org/10.1109/SCC.2011.65">https://doi.org/10.1109/SCC.2011.65</a>
  bibtex: '@inproceedings{Gerth_Luckey_Küster_Engels_2011, title={Precise Mappings
    between Business Process Models in Versioning Scenarios}, DOI={<a href="https://doi.org/10.1109/SCC.2011.65">10.1109/SCC.2011.65</a>},
    booktitle={Proceedings of the IEEE 8th International Conference on Service Computingt
    (SCC)}, author={Gerth, Christian and Luckey, Markus and Küster, Jochen and Engels,
    Gregor}, year={2011}, pages={218--225} }'
  chicago: Gerth, Christian, Markus Luckey, Jochen Küster, and Gregor Engels. “Precise
    Mappings between Business Process Models in Versioning Scenarios.” In <i>Proceedings
    of the IEEE 8th International Conference on Service Computingt (SCC)</i>, 218--225,
    2011. <a href="https://doi.org/10.1109/SCC.2011.65">https://doi.org/10.1109/SCC.2011.65</a>.
  ieee: C. Gerth, M. Luckey, J. Küster, and G. Engels, “Precise Mappings between Business
    Process Models in Versioning Scenarios,” in <i>Proceedings of the IEEE 8th International
    Conference on Service Computingt (SCC)</i>, 2011, pp. 218--225.
  mla: Gerth, Christian, et al. “Precise Mappings between Business Process Models
    in Versioning Scenarios.” <i>Proceedings of the IEEE 8th International Conference
    on Service Computingt (SCC)</i>, 2011, pp. 218--225, doi:<a href="https://doi.org/10.1109/SCC.2011.65">10.1109/SCC.2011.65</a>.
  short: 'C. Gerth, M. Luckey, J. Küster, G. Engels, in: Proceedings of the IEEE 8th
    International Conference on Service Computingt (SCC), 2011, pp. 218--225.'
date_created: 2017-10-17T12:42:59Z
date_updated: 2022-01-06T07:03:10Z
ddc:
- '040'
department:
- _id: '66'
doi: 10.1109/SCC.2011.65
file:
- access_level: closed
  content_type: application/pdf
  creator: florida
  date_created: 2018-03-14T13:53:51Z
  date_updated: 2018-03-14T13:53:51Z
  file_id: '1223'
  file_name: 652-06009264.pdf
  file_size: 713943
  relation: main_file
  success: 1
file_date_updated: 2018-03-14T13:53:51Z
has_accepted_license: '1'
language:
- iso: eng
page: 218--225
project:
- _id: '1'
  name: SFB 901
- _id: '9'
  name: SFB 901 - Subprojekt B1
- _id: '3'
  name: SFB 901 - Project Area B
publication: Proceedings of the IEEE 8th International Conference on Service Computingt
  (SCC)
status: public
title: Precise Mappings between Business Process Models in Versioning Scenarios
type: conference
user_id: '477'
year: '2011'
...
---
_id: '661'
author:
- first_name: Svetlana
  full_name: Arifulina, Svetlana
  last_name: Arifulina
citation:
  ama: Arifulina S. <i>Coverage Criteria for Testing DMM Specifications</i>. Universität
    Paderborn; 2011.
  apa: Arifulina, S. (2011). <i>Coverage Criteria for Testing DMM Specifications</i>.
    Universität Paderborn.
  bibtex: '@book{Arifulina_2011, title={Coverage Criteria for Testing DMM Specifications},
    publisher={Universität Paderborn}, author={Arifulina, Svetlana}, year={2011} }'
  chicago: Arifulina, Svetlana. <i>Coverage Criteria for Testing DMM Specifications</i>.
    Universität Paderborn, 2011.
  ieee: S. Arifulina, <i>Coverage Criteria for Testing DMM Specifications</i>. Universität
    Paderborn, 2011.
  mla: Arifulina, Svetlana. <i>Coverage Criteria for Testing DMM Specifications</i>.
    Universität Paderborn, 2011.
  short: S. Arifulina, Coverage Criteria for Testing DMM Specifications, Universität
    Paderborn, 2011.
date_created: 2017-10-17T12:43:00Z
date_updated: 2022-01-06T07:03:13Z
department:
- _id: '66'
language:
- iso: eng
project:
- _id: '1'
  name: SFB 901
- _id: '9'
  name: SFB 901 - Subprojekt B1
- _id: '3'
  name: SFB 901 - Project Area B
publisher: Universität Paderborn
status: public
supervisor:
- first_name: Gregor
  full_name: Engels, Gregor
  id: '107'
  last_name: Engels
title: Coverage Criteria for Testing DMM Specifications
type: mastersthesis
user_id: '477'
year: '2011'
...
---
_id: '6886'
author:
- first_name: S.
  full_name: Koch, S.
  last_name: Koch
- first_name: J.
  full_name: Kupke, J.
  last_name: Kupke
- first_name: D.
  full_name: Tomow, D.
  last_name: Tomow
- first_name: M.
  full_name: Schoppa, M.
  last_name: Schoppa
- first_name: Paul
  full_name: Grunow, Paul
  last_name: Grunow
- first_name: Stefan
  full_name: Krauter, Stefan
  id: '28836'
  last_name: Krauter
  orcid: 0000-0002-3594-260X
citation:
  ama: 'Koch S, Kupke J, Tomow D, Schoppa M, Grunow P, Krauter S. Polarisation Effects
    and Tests for Crystalline Silicon Cells. In: <i>Proceedings of the 26th European
    Photovoltaic Solar Energy Conference and Exhibition</i>. ; 2011.'
  apa: Koch, S., Kupke, J., Tomow, D., Schoppa, M., Grunow, P., &#38; Krauter, S.
    (2011). Polarisation Effects and Tests for Crystalline Silicon Cells. In <i>Proceedings
    of the 26th European Photovoltaic Solar Energy Conference and Exhibition</i>.
  bibtex: '@inproceedings{Koch_Kupke_Tomow_Schoppa_Grunow_Krauter_2011, title={Polarisation
    Effects and Tests for Crystalline Silicon Cells}, booktitle={Proceedings of the
    26th European Photovoltaic Solar Energy Conference and Exhibition}, author={Koch,
    S. and Kupke, J. and Tomow, D. and Schoppa, M. and Grunow, Paul and Krauter, Stefan},
    year={2011} }'
  chicago: Koch, S., J. Kupke, D. Tomow, M. Schoppa, Paul Grunow, and Stefan Krauter.
    “Polarisation Effects and Tests for Crystalline Silicon Cells.” In <i>Proceedings
    of the 26th European Photovoltaic Solar Energy Conference and Exhibition</i>,
    2011.
  ieee: S. Koch, J. Kupke, D. Tomow, M. Schoppa, P. Grunow, and S. Krauter, “Polarisation
    Effects and Tests for Crystalline Silicon Cells,” in <i>Proceedings of the 26th
    European Photovoltaic Solar Energy Conference and Exhibition</i>, 2011.
  mla: Koch, S., et al. “Polarisation Effects and Tests for Crystalline Silicon Cells.”
    <i>Proceedings of the 26th European Photovoltaic Solar Energy Conference and Exhibition</i>,
    2011.
  short: 'S. Koch, J. Kupke, D. Tomow, M. Schoppa, P. Grunow, S. Krauter, in: Proceedings
    of the 26th European Photovoltaic Solar Energy Conference and Exhibition, 2011.'
conference:
  name: 26th European Photovoltaic Solar Energy Conference and Exhibition,  Hamburg
    (Deutschland), 5.-9. September 2011
date_created: 2019-01-21T07:15:10Z
date_updated: 2022-01-06T07:03:23Z
department:
- _id: '53'
language:
- iso: eng
publication: Proceedings of the 26th European Photovoltaic Solar Energy Conference
  and Exhibition
status: public
title: Polarisation Effects and Tests for Crystalline Silicon Cells
type: conference
user_id: '16148'
year: '2011'
...
---
_id: '6887'
author:
- first_name: A.
  full_name: Böttcher, A.
  last_name: Böttcher
- first_name: M.
  full_name: Horstmann, M.
  last_name: Horstmann
- first_name: Paul
  full_name: Grunow, Paul
  last_name: Grunow
- first_name: R.
  full_name: Pourhashemi, R.
  last_name: Pourhashemi
- first_name: Stefan
  full_name: Krauter, Stefan
  id: '28836'
  last_name: Krauter
  orcid: 0000-0002-3594-260X
citation:
  ama: 'Böttcher A, Horstmann M, Grunow P, Pourhashemi R, Krauter S. Spectral Mismatch
    Correction for Micromorph Tandem Modules. . In: <i>Proceedings of the 26th European
    Photovoltaic Solar Energy Conference and Exhibition</i>. ; 2011.'
  apa: Böttcher, A., Horstmann, M., Grunow, P., Pourhashemi, R., &#38; Krauter, S.
    (2011). Spectral Mismatch Correction for Micromorph Tandem Modules. . In <i>Proceedings
    of the 26th European Photovoltaic Solar Energy Conference and Exhibition</i>.
  bibtex: '@inproceedings{Böttcher_Horstmann_Grunow_Pourhashemi_Krauter_2011, title={Spectral
    Mismatch Correction for Micromorph Tandem Modules. }, booktitle={Proceedings of
    the 26th European Photovoltaic Solar Energy Conference and Exhibition}, author={Böttcher,
    A. and Horstmann, M. and Grunow, Paul and Pourhashemi, R. and Krauter, Stefan},
    year={2011} }'
  chicago: Böttcher, A., M. Horstmann, Paul Grunow, R. Pourhashemi, and Stefan Krauter.
    “Spectral Mismatch Correction for Micromorph Tandem Modules. .” In <i>Proceedings
    of the 26th European Photovoltaic Solar Energy Conference and Exhibition</i>,
    2011.
  ieee: A. Böttcher, M. Horstmann, P. Grunow, R. Pourhashemi, and S. Krauter, “Spectral
    Mismatch Correction for Micromorph Tandem Modules. ,” in <i>Proceedings of the
    26th European Photovoltaic Solar Energy Conference and Exhibition</i>, 2011.
  mla: Böttcher, A., et al. “Spectral Mismatch Correction for Micromorph Tandem Modules.
    .” <i>Proceedings of the 26th European Photovoltaic Solar Energy Conference and
    Exhibition</i>, 2011.
  short: 'A. Böttcher, M. Horstmann, P. Grunow, R. Pourhashemi, S. Krauter, in: Proceedings
    of the 26th European Photovoltaic Solar Energy Conference and Exhibition, 2011.'
conference:
  name: 26th European Photovoltaic Solar Energy Conference and Exhibition,  Hamburg
    (Deutschland), 5.-9. September 2011
date_created: 2019-01-21T07:17:40Z
date_updated: 2022-01-06T07:03:23Z
department:
- _id: '53'
language:
- iso: eng
publication: Proceedings of the 26th European Photovoltaic Solar Energy Conference
  and Exhibition
status: public
title: 'Spectral Mismatch Correction for Micromorph Tandem Modules. '
type: conference
user_id: '16148'
year: '2011'
...
---
_id: '6888'
author:
- first_name: T.
  full_name: Weber, T.
  last_name: Weber
- first_name: A.
  full_name: Albert, A.
  last_name: Albert
- first_name: Paul
  full_name: Grunow, Paul
  last_name: Grunow
- first_name: Stefan
  full_name: Krauter, Stefan
  id: '28836'
  last_name: Krauter
  orcid: 0000-0002-3594-260X
citation:
  ama: 'Weber T, Albert A, Grunow P, Krauter S. Electroluminescence Investigation
    on Thin Film Modules. In: <i>Proceedings of the 26th European Photovoltaic Solar
    Energy Conference and Exhibition</i>. ; 2011.'
  apa: Weber, T., Albert, A., Grunow, P., &#38; Krauter, S. (2011). Electroluminescence
    Investigation on Thin Film Modules. In <i>Proceedings of the 26th European Photovoltaic
    Solar Energy Conference and Exhibition</i>.
  bibtex: '@inproceedings{Weber_Albert_Grunow_Krauter_2011, title={Electroluminescence
    Investigation on Thin Film Modules}, booktitle={Proceedings of the 26th European
    Photovoltaic Solar Energy Conference and Exhibition}, author={Weber, T. and Albert,
    A. and Grunow, Paul and Krauter, Stefan}, year={2011} }'
  chicago: Weber, T., A. Albert, Paul Grunow, and Stefan Krauter. “Electroluminescence
    Investigation on Thin Film Modules.” In <i>Proceedings of the 26th European Photovoltaic
    Solar Energy Conference and Exhibition</i>, 2011.
  ieee: T. Weber, A. Albert, P. Grunow, and S. Krauter, “Electroluminescence Investigation
    on Thin Film Modules,” in <i>Proceedings of the 26th European Photovoltaic Solar
    Energy Conference and Exhibition</i>, 2011.
  mla: Weber, T., et al. “Electroluminescence Investigation on Thin Film Modules.”
    <i>Proceedings of the 26th European Photovoltaic Solar Energy Conference and Exhibition</i>,
    2011.
  short: 'T. Weber, A. Albert, P. Grunow, S. Krauter, in: Proceedings of the 26th
    European Photovoltaic Solar Energy Conference and Exhibition, 2011.'
conference:
  name: 26th European Photovoltaic Solar Energy Conference and Exhibition,  Hamburg
    (Deutschland), 5.-9. September 2011
date_created: 2019-01-21T07:19:23Z
date_updated: 2022-01-06T07:03:23Z
department:
- _id: '53'
language:
- iso: eng
publication: Proceedings of the 26th European Photovoltaic Solar Energy Conference
  and Exhibition
status: public
title: Electroluminescence Investigation on Thin Film Modules
type: conference
user_id: '16148'
year: '2011'
...
---
_id: '16798'
author:
- first_name: Achim
  full_name: Ebert, Achim
  last_name: Ebert
- first_name: Gitta
  full_name: Domik, Gitta
  id: '90'
  last_name: Domik
- first_name: Nahum
  full_name: D. Gershon, Nahum
  last_name: D. Gershon
- first_name: Gerrit
  full_name: C. van der Veer, Gerrit
  last_name: C. van der Veer
citation:
  ama: 'Ebert A, Domik G, D. Gershon N, C. van der Veer G. Building Bridges - HCI
    and Visualization. In: F. Campos P, C. Nicholas Graham T, A. Jorge J, Jardim Nunes
    N, A. Palanque P, Winckler M, eds. <i>Human-Computer Interaction - {INTERACT}
    2011 - 13th {IFIP} {TC} 13 International Conference, Lisbon, Portugal, September
    5-9, 2011, Proceedings, Part {IV}</i>. Vol 6949. Lecture Notes in Computer Science.
    Springer; 2011:722-723. doi:<a href="https://doi.org/10.1007/978-3-642-23768-3\_133">10.1007/978-3-642-23768-3\_133</a>'
  apa: Ebert, A., Domik, G., D. Gershon, N., &#38; C. van der Veer, G. (2011). Building
    Bridges - HCI and Visualization. In P. F. Campos, T. C. Nicholas Graham, J. A.
    Jorge, N. Jardim Nunes, P. A. Palanque, &#38; M. Winckler (Eds.), <i>Human-Computer
    Interaction - {INTERACT} 2011 - 13th {IFIP} {TC} 13 International Conference,
    Lisbon, Portugal, September 5-9, 2011, Proceedings, Part {IV}</i> (Vol. 6949,
    pp. 722–723). Springer. <a href="https://doi.org/10.1007/978-3-642-23768-3\_133">https://doi.org/10.1007/978-3-642-23768-3\_133</a>
  bibtex: '@inproceedings{Ebert_Domik_D. Gershon_C. van der Veer_2011, series={Lecture
    Notes in Computer Science}, title={Building Bridges - HCI and Visualization},
    volume={6949}, DOI={<a href="https://doi.org/10.1007/978-3-642-23768-3\_133">10.1007/978-3-642-23768-3\_133</a>},
    booktitle={Human-Computer Interaction - {INTERACT} 2011 - 13th {IFIP} {TC} 13
    International Conference, Lisbon, Portugal, September 5-9, 2011, Proceedings,
    Part {IV}}, publisher={Springer}, author={Ebert, Achim and Domik, Gitta and D.
    Gershon, Nahum and C. van der Veer, Gerrit}, editor={F. Campos, Pedro and C. Nicholas
    Graham, T. and A. Jorge, Joaquim and Jardim Nunes, Nuno and A. Palanque, Philippe
    and Winckler, MarcoEditors}, year={2011}, pages={722–723}, collection={Lecture
    Notes in Computer Science} }'
  chicago: Ebert, Achim, Gitta Domik, Nahum D. Gershon, and Gerrit C. van der Veer.
    “Building Bridges - HCI and Visualization.” In <i>Human-Computer Interaction -
    {INTERACT} 2011 - 13th {IFIP} {TC} 13 International Conference, Lisbon, Portugal,
    September 5-9, 2011, Proceedings, Part {IV}</i>, edited by Pedro F. Campos, T.
    C. Nicholas Graham, Joaquim A. Jorge, Nuno Jardim Nunes, Philippe A. Palanque,
    and Marco Winckler, 6949:722–23. Lecture Notes in Computer Science. Springer,
    2011. <a href="https://doi.org/10.1007/978-3-642-23768-3\_133">https://doi.org/10.1007/978-3-642-23768-3\_133</a>.
  ieee: A. Ebert, G. Domik, N. D. Gershon, and G. C. van der Veer, “Building Bridges
    - HCI and Visualization,” in <i>Human-Computer Interaction - {INTERACT} 2011 -
    13th {IFIP} {TC} 13 International Conference, Lisbon, Portugal, September 5-9,
    2011, Proceedings, Part {IV}</i>, 2011, vol. 6949, pp. 722–723.
  mla: Ebert, Achim, et al. “Building Bridges - HCI and Visualization.” <i>Human-Computer
    Interaction - {INTERACT} 2011 - 13th {IFIP} {TC} 13 International Conference,
    Lisbon, Portugal, September 5-9, 2011, Proceedings, Part {IV}</i>, edited by Pedro
    F. Campos et al., vol. 6949, Springer, 2011, pp. 722–23, doi:<a href="https://doi.org/10.1007/978-3-642-23768-3\_133">10.1007/978-3-642-23768-3\_133</a>.
  short: 'A. Ebert, G. Domik, N. D. Gershon, G. C. van der Veer, in: P. F. Campos,
    T. C. Nicholas Graham, J. A. Jorge, N. Jardim Nunes, P. A. Palanque, M. Winckler
    (Eds.), Human-Computer Interaction - {INTERACT} 2011 - 13th {IFIP} {TC} 13 International
    Conference, Lisbon, Portugal, September 5-9, 2011, Proceedings, Part {IV}, Springer,
    2011, pp. 722–723.'
date_created: 2020-04-22T07:29:53Z
date_updated: 2022-01-06T06:52:56Z
department:
- _id: '65'
doi: 10.1007/978-3-642-23768-3\_133
editor:
- first_name: Pedro
  full_name: F. Campos, Pedro
  last_name: F. Campos
- first_name: T.
  full_name: C. Nicholas Graham, T.
  last_name: C. Nicholas Graham
- first_name: Joaquim
  full_name: A. Jorge, Joaquim
  last_name: A. Jorge
- first_name: Nuno
  full_name: Jardim Nunes, Nuno
  last_name: Jardim Nunes
- first_name: Philippe
  full_name: A. Palanque, Philippe
  last_name: A. Palanque
- first_name: Marco
  full_name: Winckler, Marco
  last_name: Winckler
intvolume: '      6949'
language:
- iso: eng
page: 722-723
publication: Human-Computer Interaction - {INTERACT} 2011 - 13th {IFIP} {TC} 13 International
  Conference, Lisbon, Portugal, September 5-9, 2011, Proceedings, Part {IV}
publisher: Springer
series_title: Lecture Notes in Computer Science
status: public
title: Building Bridges - HCI and Visualization
type: conference
user_id: '14955'
volume: 6949
year: '2011'
...
---
_id: '15969'
author:
- first_name: Christian
  full_name: Lauter, Christian
  last_name: Lauter
- first_name: M.
  full_name: Sarrazin, M.
  last_name: Sarrazin
- first_name: Thomas
  full_name: Tröster, Thomas
  id: '553'
  last_name: Tröster
citation:
  ama: Lauter C, Sarrazin M, Tröster T. Multimaterialsysteme höchstfest verbunden.
    <i>Adhäsion – Kleben und Dichten</i>. 2011;3/2011:39-43.
  apa: Lauter, C., Sarrazin, M., &#38; Tröster, T. (2011). Multimaterialsysteme höchstfest
    verbunden. <i>Adhäsion – Kleben und Dichten</i>, <i>3/2011</i>, 39–43.
  bibtex: '@article{Lauter_Sarrazin_Tröster_2011, title={Multimaterialsysteme höchstfest
    verbunden}, volume={3/2011}, journal={Adhäsion – Kleben und Dichten}, publisher={Springer
    Vieweg}, author={Lauter, Christian and Sarrazin, M. and Tröster, Thomas}, year={2011},
    pages={39–43} }'
  chicago: 'Lauter, Christian, M. Sarrazin, and Thomas Tröster. “Multimaterialsysteme
    höchstfest verbunden.” <i>Adhäsion – Kleben und Dichten</i> 3/2011 (2011): 39–43.'
  ieee: C. Lauter, M. Sarrazin, and T. Tröster, “Multimaterialsysteme höchstfest verbunden,”
    <i>Adhäsion – Kleben und Dichten</i>, vol. 3/2011, pp. 39–43, 2011.
  mla: Lauter, Christian, et al. “Multimaterialsysteme höchstfest verbunden.” <i>Adhäsion
    – Kleben und Dichten</i>, vol. 3/2011, Springer Vieweg, 2011, pp. 39–43.
  short: C. Lauter, M. Sarrazin, T. Tröster, Adhäsion – Kleben und Dichten 3/2011
    (2011) 39–43.
date_created: 2020-02-21T15:07:12Z
date_updated: 2022-01-06T06:52:41Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: ger
page: 39-43
publication: Adhäsion – Kleben und Dichten
publisher: Springer Vieweg
status: public
title: Multimaterialsysteme höchstfest verbunden
type: journal_article
user_id: '72008'
volume: 3/2011
year: '2011'
...
---
_id: '15971'
author:
- first_name: Meike
  full_name: Frantz, Meike
  last_name: Frantz
- first_name: O.
  full_name: Stübbe, O.
  last_name: Stübbe
- first_name: Christian
  full_name: Lauter, Christian
  last_name: Lauter
- first_name: J.
  full_name: Schrange, J.
  last_name: Schrange
- first_name: Thomas
  full_name: Tröster, Thomas
  id: '553'
  last_name: Tröster
citation:
  ama: 'Frantz M, Stübbe O, Lauter C, Schrange J, Tröster T. Mechatronisches System
    zur Bestimmung der Restlebensdauer von Faserverbund-Leichtbaustrukturen am Beispiel
    einer Lauffeder. In: ; 2011.'
  apa: Frantz, M., Stübbe, O., Lauter, C., Schrange, J., &#38; Tröster, T. (2011).
    Mechatronisches System zur Bestimmung der Restlebensdauer von Faserverbund-Leichtbaustrukturen
    am Beispiel einer Lauffeder. Presented at the InnoMateria – Interdisziplinäre
    Kongressmesse für innovative Werkstoffe, Köln.
  bibtex: '@inproceedings{Frantz_Stübbe_Lauter_Schrange_Tröster_2011, title={Mechatronisches
    System zur Bestimmung der Restlebensdauer von Faserverbund-Leichtbaustrukturen
    am Beispiel einer Lauffeder}, author={Frantz, Meike and Stübbe, O. and Lauter,
    Christian and Schrange, J. and Tröster, Thomas}, year={2011} }'
  chicago: Frantz, Meike, O. Stübbe, Christian Lauter, J. Schrange, and Thomas Tröster.
    “Mechatronisches System zur Bestimmung der Restlebensdauer von Faserverbund-Leichtbaustrukturen
    am Beispiel einer Lauffeder,” 2011.
  ieee: M. Frantz, O. Stübbe, C. Lauter, J. Schrange, and T. Tröster, “Mechatronisches
    System zur Bestimmung der Restlebensdauer von Faserverbund-Leichtbaustrukturen
    am Beispiel einer Lauffeder,” presented at the InnoMateria – Interdisziplinäre
    Kongressmesse für innovative Werkstoffe, Köln, 2011.
  mla: Frantz, Meike, et al. <i>Mechatronisches System zur Bestimmung der Restlebensdauer
    von Faserverbund-Leichtbaustrukturen am Beispiel einer Lauffeder</i>. 2011.
  short: 'M. Frantz, O. Stübbe, C. Lauter, J. Schrange, T. Tröster, in: 2011.'
conference:
  end_date: 2011-03-16
  location: Köln
  name: InnoMateria – Interdisziplinäre Kongressmesse für innovative Werkstoffe
  start_date: 2011-03-15
date_created: 2020-02-21T15:17:59Z
date_updated: 2022-01-06T06:52:41Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: ger
status: public
title: Mechatronisches System zur Bestimmung der Restlebensdauer von Faserverbund-Leichtbaustrukturen
  am Beispiel einer Lauffeder
type: conference
user_id: '72008'
year: '2011'
...
---
_id: '15972'
author:
- first_name: D.
  full_name: Thomas, D.
  last_name: Thomas
- first_name: H.
  full_name: Block, H.
  last_name: Block
- first_name: Thomas
  full_name: Tröster, Thomas
  id: '553'
  last_name: Tröster
- first_name: J.
  full_name: Krogmeier, J.
  last_name: Krogmeier
citation:
  ama: 'Thomas D, Block H, Tröster T, Krogmeier J. Herstellung von belastungsgerechten
    Strukturbauteilen mittels partieller induktiver Härtung. In: ; 2011.'
  apa: Thomas, D., Block, H., Tröster, T., &#38; Krogmeier, J. (2011). Herstellung
    von belastungsgerechten Strukturbauteilen mittels partieller induktiver Härtung.
    Presented at the InnoMateria – Interdisziplinäre Kongressmesse für innovative
    Werkstoffe, Köln.
  bibtex: '@inproceedings{Thomas_Block_Tröster_Krogmeier_2011, title={Herstellung
    von belastungsgerechten Strukturbauteilen mittels partieller induktiver Härtung},
    author={Thomas, D. and Block, H. and Tröster, Thomas and Krogmeier, J.}, year={2011}
    }'
  chicago: Thomas, D., H. Block, Thomas Tröster, and J. Krogmeier. “Herstellung von
    belastungsgerechten Strukturbauteilen mittels partieller induktiver Härtung,”
    2011.
  ieee: D. Thomas, H. Block, T. Tröster, and J. Krogmeier, “Herstellung von belastungsgerechten
    Strukturbauteilen mittels partieller induktiver Härtung,” presented at the InnoMateria
    – Interdisziplinäre Kongressmesse für innovative Werkstoffe, Köln, 2011.
  mla: Thomas, D., et al. <i>Herstellung von belastungsgerechten Strukturbauteilen
    mittels partieller induktiver Härtung</i>. 2011.
  short: 'D. Thomas, H. Block, T. Tröster, J. Krogmeier, in: 2011.'
conference:
  end_date: 2011-03-16
  location: Köln
  name: InnoMateria – Interdisziplinäre Kongressmesse für innovative Werkstoffe
  start_date: 2011-03-15
date_created: 2020-02-21T15:20:49Z
date_updated: 2022-01-06T06:52:41Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: ger
status: public
title: Herstellung von belastungsgerechten Strukturbauteilen mittels partieller induktiver
  Härtung
type: conference
user_id: '72008'
year: '2011'
...
---
_id: '15974'
author:
- first_name: Thorsten
  full_name: Marten, Thorsten
  id: '338'
  last_name: Marten
- first_name: Christian
  full_name: Lauter, Christian
  last_name: Lauter
- first_name: Thomas
  full_name: Tröster, Thomas
  id: '553'
  last_name: Tröster
citation:
  ama: Marten T, Lauter C, Tröster T. Automobilleichtbau durch höchstfeste Multimaterialsysteme.
    <i>Ingenieurspiegel</i>. 2011;2/2011:67-69.
  apa: Marten, T., Lauter, C., &#38; Tröster, T. (2011). Automobilleichtbau durch
    höchstfeste Multimaterialsysteme. <i>Ingenieurspiegel</i>, <i>2/2011</i>, 67–69.
  bibtex: '@article{Marten_Lauter_Tröster_2011, title={Automobilleichtbau durch höchstfeste
    Multimaterialsysteme}, volume={2/2011}, journal={Ingenieurspiegel}, publisher={Public
    Verlagsgesellschaft und Anzeigenagentur}, author={Marten, Thorsten and Lauter,
    Christian and Tröster, Thomas}, year={2011}, pages={67–69} }'
  chicago: 'Marten, Thorsten, Christian Lauter, and Thomas Tröster. “Automobilleichtbau
    durch höchstfeste Multimaterialsysteme.” <i>Ingenieurspiegel</i> 2/2011 (2011):
    67–69.'
  ieee: T. Marten, C. Lauter, and T. Tröster, “Automobilleichtbau durch höchstfeste
    Multimaterialsysteme,” <i>Ingenieurspiegel</i>, vol. 2/2011, pp. 67–69, 2011.
  mla: Marten, Thorsten, et al. “Automobilleichtbau durch höchstfeste Multimaterialsysteme.”
    <i>Ingenieurspiegel</i>, vol. 2/2011, Public Verlagsgesellschaft und Anzeigenagentur,
    2011, pp. 67–69.
  short: T. Marten, C. Lauter, T. Tröster, Ingenieurspiegel 2/2011 (2011) 67–69.
date_created: 2020-02-21T15:24:34Z
date_updated: 2022-01-06T06:52:41Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: ger
page: 67-69
publication: Ingenieurspiegel
publisher: Public Verlagsgesellschaft und Anzeigenagentur
status: public
title: Automobilleichtbau durch höchstfeste Multimaterialsysteme
type: journal_article
user_id: '72008'
volume: 2/2011
year: '2011'
...
---
_id: '15975'
author:
- first_name: Christian
  full_name: Lauter, Christian
  last_name: Lauter
- first_name: D.
  full_name: Thomas, D.
  last_name: Thomas
- first_name: Meike
  full_name: Frantz, Meike
  last_name: Frantz
- first_name: J.
  full_name: Niewel, J.
  last_name: Niewel
- first_name: Thomas
  full_name: Tröster, Thomas
  id: '553'
  last_name: Tröster
citation:
  ama: Lauter C, Thomas D, Frantz M, Niewel J, Tröster T. Belastungsangepasste Strukturbauteile
    für Automobile aus höchstfesten Werkstoffen und Hybridwerkstoffen. <i>Werkstoffe
    in der Fertigung – Die Fachzeitschrift für technische Führungskräfte</i>. 2011;2:6-7.
  apa: Lauter, C., Thomas, D., Frantz, M., Niewel, J., &#38; Tröster, T. (2011). Belastungsangepasste
    Strukturbauteile für Automobile aus höchstfesten Werkstoffen und Hybridwerkstoffen.
    <i>Werkstoffe in der Fertigung – Die Fachzeitschrift für technische Führungskräfte</i>,
    <i>2</i>, 6–7.
  bibtex: '@article{Lauter_Thomas_Frantz_Niewel_Tröster_2011, title={Belastungsangepasste
    Strukturbauteile für Automobile aus höchstfesten Werkstoffen und Hybridwerkstoffen},
    volume={2}, journal={Werkstoffe in der Fertigung – Die Fachzeitschrift für technische
    Führungskräfte}, publisher={HW-Verlag}, author={Lauter, Christian and Thomas,
    D. and Frantz, Meike and Niewel, J. and Tröster, Thomas}, year={2011}, pages={6–7}
    }'
  chicago: 'Lauter, Christian, D. Thomas, Meike Frantz, J. Niewel, and Thomas Tröster.
    “Belastungsangepasste Strukturbauteile für Automobile aus höchstfesten Werkstoffen
    und Hybridwerkstoffen.” <i>Werkstoffe in der Fertigung – Die Fachzeitschrift für
    technische Führungskräfte</i> 2 (2011): 6–7.'
  ieee: C. Lauter, D. Thomas, M. Frantz, J. Niewel, and T. Tröster, “Belastungsangepasste
    Strukturbauteile für Automobile aus höchstfesten Werkstoffen und Hybridwerkstoffen,”
    <i>Werkstoffe in der Fertigung – Die Fachzeitschrift für technische Führungskräfte</i>,
    vol. 2, pp. 6–7, 2011.
  mla: Lauter, Christian, et al. “Belastungsangepasste Strukturbauteile für Automobile
    aus höchstfesten Werkstoffen und Hybridwerkstoffen.” <i>Werkstoffe in der Fertigung
    – Die Fachzeitschrift für technische Führungskräfte</i>, vol. 2, HW-Verlag, 2011,
    pp. 6–7.
  short: C. Lauter, D. Thomas, M. Frantz, J. Niewel, T. Tröster, Werkstoffe in der
    Fertigung – Die Fachzeitschrift für technische Führungskräfte 2 (2011) 6–7.
date_created: 2020-02-21T15:28:10Z
date_updated: 2022-01-06T06:52:41Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
intvolume: '         2'
language:
- iso: ger
page: 6-7
publication: Werkstoffe in der Fertigung – Die Fachzeitschrift für technische Führungskräfte
publisher: HW-Verlag
status: public
title: Belastungsangepasste Strukturbauteile für Automobile aus höchstfesten Werkstoffen
  und Hybridwerkstoffen
type: journal_article
user_id: '72008'
volume: 2
year: '2011'
...
---
_id: '15980'
author:
- first_name: Christian
  full_name: Lauter, Christian
  last_name: Lauter
- first_name: Meike
  full_name: Frantz, Meike
  last_name: Frantz
- first_name: Bernd
  full_name: Siewers, Bernd
  last_name: Siewers
- first_name: Thomas
  full_name: Tröster, Thomas
  id: '553'
  last_name: Tröster
citation:
  ama: Lauter C, Frantz M, Siewers B, Tröster T. Hybrid structures for tailored structural
    automotive components. <i>JEC Composites Magazine</i>. 2011;69:35-37.
  apa: Lauter, C., Frantz, M., Siewers, B., &#38; Tröster, T. (2011). Hybrid structures
    for tailored structural automotive components. <i>JEC Composites Magazine</i>,
    <i>69</i>, 35–37.
  bibtex: '@article{Lauter_Frantz_Siewers_Tröster_2011, title={Hybrid structures for
    tailored structural automotive components}, volume={69}, journal={JEC Composites
    Magazine}, publisher={JEC Composites}, author={Lauter, Christian and Frantz, Meike
    and Siewers, Bernd and Tröster, Thomas}, year={2011}, pages={35–37} }'
  chicago: 'Lauter, Christian, Meike Frantz, Bernd Siewers, and Thomas Tröster. “Hybrid
    Structures for Tailored Structural Automotive Components.” <i>JEC Composites Magazine</i>
    69 (2011): 35–37.'
  ieee: C. Lauter, M. Frantz, B. Siewers, and T. Tröster, “Hybrid structures for tailored
    structural automotive components,” <i>JEC Composites Magazine</i>, vol. 69, pp.
    35–37, 2011.
  mla: Lauter, Christian, et al. “Hybrid Structures for Tailored Structural Automotive
    Components.” <i>JEC Composites Magazine</i>, vol. 69, JEC Composites, 2011, pp.
    35–37.
  short: C. Lauter, M. Frantz, B. Siewers, T. Tröster, JEC Composites Magazine 69
    (2011) 35–37.
date_created: 2020-02-24T08:22:55Z
date_updated: 2022-01-06T06:52:41Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
intvolume: '        69'
language:
- iso: eng
page: 35-37
publication: JEC Composites Magazine
publisher: JEC Composites
status: public
title: Hybrid structures for tailored structural automotive components
type: journal_article
user_id: '72008'
volume: 69
year: '2011'
...
---
_id: '15990'
author:
- first_name: D.
  full_name: Thomas, D.
  last_name: Thomas
- first_name: H.
  full_name: Block, H.
  last_name: Block
- first_name: Thomas
  full_name: Tröster, Thomas
  id: '553'
  last_name: Tröster
citation:
  ama: 'Thomas D, Block H, Tröster T. Production of load-adapted lightweight designs
    by partial hardening. In: ; 2011.'
  apa: Thomas, D., Block, H., &#38; Tröster, T. (2011). Production of load-adapted
    lightweight designs by partial hardening. Presented at the 3rd International Conference
    on Steels in Cars and Trucks (SCT), Salzburg.
  bibtex: '@inproceedings{Thomas_Block_Tröster_2011, title={Production of load-adapted
    lightweight designs by partial hardening}, author={Thomas, D. and Block, H. and
    Tröster, Thomas}, year={2011} }'
  chicago: Thomas, D., H. Block, and Thomas Tröster. “Production of Load-Adapted Lightweight
    Designs by Partial Hardening,” 2011.
  ieee: D. Thomas, H. Block, and T. Tröster, “Production of load-adapted lightweight
    designs by partial hardening,” presented at the 3rd International Conference on
    Steels in Cars and Trucks (SCT), Salzburg, 2011.
  mla: Thomas, D., et al. <i>Production of Load-Adapted Lightweight Designs by Partial
    Hardening</i>. 2011.
  short: 'D. Thomas, H. Block, T. Tröster, in: 2011.'
conference:
  end_date: 2011-06-09
  location: Salzburg
  name: 3rd International Conference on Steels in Cars and Trucks (SCT)
  start_date: 2011-06-05
date_created: 2020-02-24T09:40:38Z
date_updated: 2022-01-06T06:52:41Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: eng
status: public
title: Production of load-adapted lightweight designs by partial hardening
type: conference
user_id: '72008'
year: '2011'
...
---
_id: '15992'
author:
- first_name: B.
  full_name: Gorny, B.
  last_name: Gorny
- first_name: T.
  full_name: Niendorf, T.
  last_name: Niendorf
- first_name: J.
  full_name: Lackmann, J.
  last_name: Lackmann
- first_name: M.
  full_name: Thoene, M.
  last_name: Thoene
- first_name: Thomas
  full_name: Tröster, Thomas
  id: '553'
  last_name: Tröster
- first_name: H.J.
  full_name: Maier, H.J.
  last_name: Maier
citation:
  ama: 'Gorny B, Niendorf T, Lackmann J, Thoene M, Tröster T, Maier HJ. In situ characterization
    of the deformation and failure behavior of non-stochastic porous structures processed
    by selective laser melting. <i>Materials Science and Engineering: A</i>. 2011;528(27):7962-7967.
    doi:<a href="https://doi.org/10.1016/j.msea.2011.07.026">10.1016/j.msea.2011.07.026</a>'
  apa: 'Gorny, B., Niendorf, T., Lackmann, J., Thoene, M., Tröster, T., &#38; Maier,
    H. J. (2011). In situ characterization of the deformation and failure behavior
    of non-stochastic porous structures processed by selective laser melting. <i>Materials
    Science and Engineering: A</i>, <i>528</i>(27), 7962–7967. <a href="https://doi.org/10.1016/j.msea.2011.07.026">https://doi.org/10.1016/j.msea.2011.07.026</a>'
  bibtex: '@article{Gorny_Niendorf_Lackmann_Thoene_Tröster_Maier_2011, title={In situ
    characterization of the deformation and failure behavior of non-stochastic porous
    structures processed by selective laser melting}, volume={528}, DOI={<a href="https://doi.org/10.1016/j.msea.2011.07.026">10.1016/j.msea.2011.07.026</a>},
    number={27}, journal={Materials Science and Engineering: A}, author={Gorny, B.
    and Niendorf, T. and Lackmann, J. and Thoene, M. and Tröster, Thomas and Maier,
    H.J.}, year={2011}, pages={7962–7967} }'
  chicago: 'Gorny, B., T. Niendorf, J. Lackmann, M. Thoene, Thomas Tröster, and H.J.
    Maier. “In Situ Characterization of the Deformation and Failure Behavior of Non-Stochastic
    Porous Structures Processed by Selective Laser Melting.” <i>Materials Science
    and Engineering: A</i> 528, no. 27 (2011): 7962–67. <a href="https://doi.org/10.1016/j.msea.2011.07.026">https://doi.org/10.1016/j.msea.2011.07.026</a>.'
  ieee: 'B. Gorny, T. Niendorf, J. Lackmann, M. Thoene, T. Tröster, and H. J. Maier,
    “In situ characterization of the deformation and failure behavior of non-stochastic
    porous structures processed by selective laser melting,” <i>Materials Science
    and Engineering: A</i>, vol. 528, no. 27, pp. 7962–7967, 2011.'
  mla: 'Gorny, B., et al. “In Situ Characterization of the Deformation and Failure
    Behavior of Non-Stochastic Porous Structures Processed by Selective Laser Melting.”
    <i>Materials Science and Engineering: A</i>, vol. 528, no. 27, 2011, pp. 7962–67,
    doi:<a href="https://doi.org/10.1016/j.msea.2011.07.026">10.1016/j.msea.2011.07.026</a>.'
  short: 'B. Gorny, T. Niendorf, J. Lackmann, M. Thoene, T. Tröster, H.J. Maier, Materials
    Science and Engineering: A 528 (2011) 7962–7967.'
date_created: 2020-02-24T09:52:00Z
date_updated: 2022-01-06T06:52:41Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
doi: 10.1016/j.msea.2011.07.026
intvolume: '       528'
issue: '27'
language:
- iso: eng
page: 7962-7967
publication: 'Materials Science and Engineering: A'
publication_identifier:
  issn:
  - 0921-5093
publication_status: published
status: public
title: In situ characterization of the deformation and failure behavior of non-stochastic
  porous structures processed by selective laser melting
type: journal_article
user_id: '72008'
volume: 528
year: '2011'
...
---
_id: '15993'
author:
- first_name: Christian
  full_name: Lauter, Christian
  last_name: Lauter
- first_name: Meike
  full_name: Frantz, Meike
  last_name: Frantz
- first_name: Thomas
  full_name: Tröster, Thomas
  id: '553'
  last_name: Tröster
citation:
  ama: Lauter C, Frantz M, Tröster T. Großserientaugliche Herstellung höchstfester
    Hybridwerkstoffe durch Prepregpressen. <i>Lightweight Design</i>. 2011;4:48-54.
  apa: Lauter, C., Frantz, M., &#38; Tröster, T. (2011). Großserientaugliche Herstellung
    höchstfester Hybridwerkstoffe durch Prepregpressen. <i>Lightweight Design</i>,
    <i>4</i>, 48–54.
  bibtex: '@article{Lauter_Frantz_Tröster_2011, title={Großserientaugliche Herstellung
    höchstfester Hybridwerkstoffe durch Prepregpressen}, volume={4}, journal={Lightweight
    Design}, author={Lauter, Christian and Frantz, Meike and Tröster, Thomas}, year={2011},
    pages={48–54} }'
  chicago: 'Lauter, Christian, Meike Frantz, and Thomas Tröster. “Großserientaugliche
    Herstellung höchstfester Hybridwerkstoffe durch Prepregpressen.” <i>Lightweight
    Design</i> 4 (2011): 48–54.'
  ieee: C. Lauter, M. Frantz, and T. Tröster, “Großserientaugliche Herstellung höchstfester
    Hybridwerkstoffe durch Prepregpressen,” <i>Lightweight Design</i>, vol. 4, pp.
    48–54, 2011.
  mla: Lauter, Christian, et al. “Großserientaugliche Herstellung höchstfester Hybridwerkstoffe
    durch Prepregpressen.” <i>Lightweight Design</i>, vol. 4, 2011, pp. 48–54.
  short: C. Lauter, M. Frantz, T. Tröster, Lightweight Design 4 (2011) 48–54.
date_created: 2020-02-24T09:56:36Z
date_updated: 2022-01-06T06:52:41Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
intvolume: '         4'
language:
- iso: ger
page: 48-54
publication: Lightweight Design
status: public
title: Großserientaugliche Herstellung höchstfester Hybridwerkstoffe durch Prepregpressen
type: journal_article
user_id: '72008'
volume: 4
year: '2011'
...
---
_id: '15996'
author:
- first_name: Meike
  full_name: Frantz, Meike
  last_name: Frantz
- first_name: Christian
  full_name: Lauter, Christian
  last_name: Lauter
- first_name: Thomas
  full_name: Tröster, Thomas
  id: '553'
  last_name: Tröster
citation:
  ama: 'Frantz M, Lauter C, Tröster T. Advanced manufacturing technologies for automotive
    structures in multi-material design consisting of high-strength steels and CFRP.
    In: ; 2011.'
  apa: Frantz, M., Lauter, C., &#38; Tröster, T. (2011). Advanced manufacturing technologies
    for automotive structures in multi-material design consisting of high-strength
    steels and CFRP. Presented at the 56th International Scientific Colloquium (56th
    IWK), Ilmenau.
  bibtex: '@inproceedings{Frantz_Lauter_Tröster_2011, title={Advanced manufacturing
    technologies for automotive structures in multi-material design consisting of
    high-strength steels and CFRP}, author={Frantz, Meike and Lauter, Christian and
    Tröster, Thomas}, year={2011} }'
  chicago: Frantz, Meike, Christian Lauter, and Thomas Tröster. “Advanced Manufacturing
    Technologies for Automotive Structures in Multi-Material Design Consisting of
    High-Strength Steels and CFRP,” 2011.
  ieee: M. Frantz, C. Lauter, and T. Tröster, “Advanced manufacturing technologies
    for automotive structures in multi-material design consisting of high-strength
    steels and CFRP,” presented at the 56th International Scientific Colloquium (56th
    IWK), Ilmenau, 2011.
  mla: Frantz, Meike, et al. <i>Advanced Manufacturing Technologies for Automotive
    Structures in Multi-Material Design Consisting of High-Strength Steels and CFRP</i>.
    2011.
  short: 'M. Frantz, C. Lauter, T. Tröster, in: 2011.'
conference:
  end_date: 2011-09-16
  location: Ilmenau
  name: 56th International Scientific Colloquium (56th IWK)
  start_date: 2011-09-12
date_created: 2020-02-24T10:16:34Z
date_updated: 2022-01-06T06:52:41Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: eng
status: public
title: Advanced manufacturing technologies for automotive structures in multi-material
  design consisting of high-strength steels and CFRP
type: conference
user_id: '72008'
year: '2011'
...