---
_id: '9767'
abstract:
- lang: eng
  text: The paper presents the results of numerical and experimental investigation
    of cylindrical piezoelectric actuator used for achieving independent three degrees
    of freedom oscillations of the contact point. The design of actuator based on
    a hollow piezoelectric cylinder mounted on a metal rod. The piezoceramic cylinder
    has a radial polarization and special configuration of the electrodes that cover
    inner and outer surface of the cylinder. The main advantage of actuator's design
    is that solid metallic rod operates as a part of inner electrode of the cylinder
    and a stator of actuator. The geometry of piezoelectric actuator was adopted to
    reach resonance of oscillations for the first longitudinal mode and the third
    flexural mode at same frequency. The actuator is designed to move positioned object
    through contact point which is located on the top of the rod. The optimal topology
    of electrodes was found to achieve longitudinal and flexural oscillations of the
    actuator in two perpendicular planes. Three degrees of freedom of the positioning
    object can be achieved and control of the system can be implemented by applying
    different excitation schemes and regimes. The numerical simulation and experimental
    study of piezoelectric actuator was performed. Impedance of actuator was analyzed
    under different excitation regimes. The results of numerical modeling and experimental
    study were compared. Recommendations for the further development of this type
    of actuator are given.
author:
- first_name: Raimundas
  full_name: Lucinskis, Raimundas
  last_name: Lucinskis
- first_name: Dalius
  full_name: Mazeika, Dalius
  last_name: Mazeika
- first_name: Tobias
  full_name: Hemsel, Tobias
  id: '210'
  last_name: Hemsel
- first_name: Ramutis
  full_name: Bansevicius, Ramutis
  last_name: Bansevicius
citation:
  ama: Lucinskis R, Mazeika D, Hemsel T, Bansevicius R. Multi-DOF cylindrical piezoelectric
    actuator with radial polarization. <i>AIP Conference Proceedings</i>. 2011;1433(1):693-696.
    doi:<a href="https://doi.org/10.1063/1.3703277">10.1063/1.3703277</a>
  apa: Lucinskis, R., Mazeika, D., Hemsel, T., &#38; Bansevicius, R. (2011). Multi-DOF
    cylindrical piezoelectric actuator with radial polarization. <i>AIP Conference
    Proceedings</i>, <i>1433</i>(1), 693–696. <a href="https://doi.org/10.1063/1.3703277">https://doi.org/10.1063/1.3703277</a>
  bibtex: '@article{Lucinskis_Mazeika_Hemsel_Bansevicius_2011, title={Multi-DOF cylindrical
    piezoelectric actuator with radial polarization}, volume={1433}, DOI={<a href="https://doi.org/10.1063/1.3703277">10.1063/1.3703277</a>},
    number={1}, journal={AIP Conference Proceedings}, publisher={AIP}, author={Lucinskis,
    Raimundas and Mazeika, Dalius and Hemsel, Tobias and Bansevicius, Ramutis}, year={2011},
    pages={693–696} }'
  chicago: 'Lucinskis, Raimundas, Dalius Mazeika, Tobias Hemsel, and Ramutis Bansevicius.
    “Multi-DOF Cylindrical Piezoelectric Actuator with Radial Polarization.” <i>AIP
    Conference Proceedings</i> 1433, no. 1 (2011): 693–96. <a href="https://doi.org/10.1063/1.3703277">https://doi.org/10.1063/1.3703277</a>.'
  ieee: R. Lucinskis, D. Mazeika, T. Hemsel, and R. Bansevicius, “Multi-DOF cylindrical
    piezoelectric actuator with radial polarization,” <i>AIP Conference Proceedings</i>,
    vol. 1433, no. 1, pp. 693–696, 2011.
  mla: Lucinskis, Raimundas, et al. “Multi-DOF Cylindrical Piezoelectric Actuator
    with Radial Polarization.” <i>AIP Conference Proceedings</i>, vol. 1433, no. 1,
    AIP, 2011, pp. 693–96, doi:<a href="https://doi.org/10.1063/1.3703277">10.1063/1.3703277</a>.
  short: R. Lucinskis, D. Mazeika, T. Hemsel, R. Bansevicius, AIP Conference Proceedings
    1433 (2011) 693–696.
date_created: 2019-05-13T10:56:30Z
date_updated: 2022-01-06T07:04:19Z
department:
- _id: '151'
doi: 10.1063/1.3703277
intvolume: '      1433'
issue: '1'
keyword:
- dielectric polarisation
- piezoceramics
- piezoelectric actuators
language:
- iso: eng
page: 693-696
publication: AIP Conference Proceedings
publisher: AIP
quality_controlled: '1'
status: public
title: Multi-DOF cylindrical piezoelectric actuator with radial polarization
type: journal_article
user_id: '55222'
volume: 1433
year: '2011'
...
---
_id: '9768'
author:
- first_name: Oleg
  full_name: Lurie, Oleg
  last_name: Lurie
- first_name: Ivan
  full_name: Kromov, Ivan
  last_name: Kromov
- first_name: Ansgar
  full_name: Trächtler, Ansgar
  last_name: Trächtler
- first_name: Christoph
  full_name: Sondermann-Wölke, Christoph
  last_name: Sondermann-Wölke
- first_name: Walter
  full_name: Sextro, Walter
  id: '21220'
  last_name: Sextro
citation:
  ama: 'Lurie O, Kromov I, Trächtler A, Sondermann-Wölke C, Sextro W. Dependability
    Analysis of the Degradation Behavior of Mechatronics Systems with Different Operating
    Strategies. In: <i>25. Tagung Technische Zuverlässigkeit (TTZ 2011) - Entwicklung
    Und Betrieb Zuverlässiger Produkte</i>. Leonberg; 2011:99-110.'
  apa: Lurie, O., Kromov, I., Trächtler, A., Sondermann-Wölke, C., &#38; Sextro, W.
    (2011). Dependability Analysis of the Degradation Behavior of Mechatronics Systems
    with Different Operating Strategies. In <i>25. Tagung Technische Zuverlässigkeit
    (TTZ 2011) - Entwicklung und Betrieb zuverlässiger Produkte</i> (pp. 99–110).
    Leonberg.
  bibtex: '@inproceedings{Lurie_Kromov_Trächtler_Sondermann-Wölke_Sextro_2011, place={Leonberg},
    title={Dependability Analysis of the Degradation Behavior of Mechatronics Systems
    with Different Operating Strategies}, booktitle={25. Tagung Technische Zuverlässigkeit
    (TTZ 2011) - Entwicklung und Betrieb zuverlässiger Produkte}, author={Lurie, Oleg
    and Kromov, Ivan and Trächtler, Ansgar and Sondermann-Wölke, Christoph and Sextro,
    Walter}, year={2011}, pages={99–110} }'
  chicago: Lurie, Oleg, Ivan Kromov, Ansgar Trächtler, Christoph Sondermann-Wölke,
    and Walter Sextro. “Dependability Analysis of the Degradation Behavior of Mechatronics
    Systems with Different Operating Strategies.” In <i>25. Tagung Technische Zuverlässigkeit
    (TTZ 2011) - Entwicklung Und Betrieb Zuverlässiger Produkte</i>, 99–110. Leonberg,
    2011.
  ieee: O. Lurie, I. Kromov, A. Trächtler, C. Sondermann-Wölke, and W. Sextro, “Dependability
    Analysis of the Degradation Behavior of Mechatronics Systems with Different Operating
    Strategies,” in <i>25. Tagung Technische Zuverlässigkeit (TTZ 2011) - Entwicklung
    und Betrieb zuverlässiger Produkte</i>, 2011, pp. 99–110.
  mla: Lurie, Oleg, et al. “Dependability Analysis of the Degradation Behavior of
    Mechatronics Systems with Different Operating Strategies.” <i>25. Tagung Technische
    Zuverlässigkeit (TTZ 2011) - Entwicklung Und Betrieb Zuverlässiger Produkte</i>,
    2011, pp. 99–110.
  short: 'O. Lurie, I. Kromov, A. Trächtler, C. Sondermann-Wölke, W. Sextro, in: 25.
    Tagung Technische Zuverlässigkeit (TTZ 2011) - Entwicklung Und Betrieb Zuverlässiger
    Produkte, Leonberg, 2011, pp. 99–110.'
date_created: 2019-05-13T10:57:24Z
date_updated: 2022-01-06T07:04:19Z
department:
- _id: '151'
language:
- iso: eng
page: 99-110
place: Leonberg
publication: 25. Tagung Technische Zuverlässigkeit (TTZ 2011) - Entwicklung und Betrieb
  zuverlässiger Produkte
status: public
title: Dependability Analysis of the Degradation Behavior of Mechatronics Systems
  with Different Operating Strategies
type: conference
user_id: '55222'
year: '2011'
...
---
_id: '9769'
abstract:
- lang: eng
  text: In this study, we report some improvements in a hydrothermal method for lead-free
    piezoelectric powders and the performance of the sintered (K$_{0.48}$Na$_{0.52}$)NbO$_{3}$
    ceramics. To increase the obtained powder weight per source solution volume, the
    hydrothermal reaction conditions were modified. This improvement is important
    for mass production; however, it resulted in a larger particle size dispersion.
    Therefore, we examined to introduced the ball milling process that is useful for
    dense (K$_{0.48}$Na$_{0.52}$)NbO$_{3}$ ceramics. When a large amount of powder
    was obtained, it took a long time to eliminate the residual alkaline ions in the
    hydrothermal powders by a washing process. Therefore, a neutralization was conducted
    in the powder washing process. Using this powder, a solid solution of (K,Na)NbO$_{3}$ceramics
    was synthesized. The relative density was successfully increased. Concerning the
    electrical properties, the relative permittivity was improved, and the piezoelectric
    constant d$_{33}$ was also increased from 114 to 130 pC/N.
author:
- first_name: Takafumi
  full_name: Maeda, Takafumi
  last_name: Maeda
- first_name: Tobias
  full_name: Hemsel, Tobias
  id: '210'
  last_name: Hemsel
- first_name: Takeshi
  full_name: Morita, Takeshi
  last_name: Morita
citation:
  ama: Maeda T, Hemsel T, Morita T. Improved Process for Hydrothermal Lead-Free Piezoelectric
    Powders and Performances of Sintered (K0.48Na0.52)NbO3 Ceramics. <i>Japanese Journal
    of Applied Physics</i>. 2011;50:07HC01.
  apa: Maeda, T., Hemsel, T., &#38; Morita, T. (2011). Improved Process for Hydrothermal
    Lead-Free Piezoelectric Powders and Performances of Sintered (K0.48Na0.52)NbO3
    Ceramics. <i>Japanese Journal of Applied Physics</i>, <i>50</i>, 07HC01.
  bibtex: '@article{Maeda_Hemsel_Morita_2011, title={Improved Process for Hydrothermal
    Lead-Free Piezoelectric Powders and Performances of Sintered (K0.48Na0.52)NbO3
    Ceramics}, volume={50}, journal={Japanese Journal of Applied Physics}, publisher={The
    Japan Society of Applied Physics}, author={Maeda, Takafumi and Hemsel, Tobias
    and Morita, Takeshi}, year={2011}, pages={07HC01} }'
  chicago: 'Maeda, Takafumi, Tobias Hemsel, and Takeshi Morita. “Improved Process
    for Hydrothermal Lead-Free Piezoelectric Powders and Performances of Sintered
    (K0.48Na0.52)NbO3 Ceramics.” <i>Japanese Journal of Applied Physics</i> 50 (2011):
    07HC01.'
  ieee: T. Maeda, T. Hemsel, and T. Morita, “Improved Process for Hydrothermal Lead-Free
    Piezoelectric Powders and Performances of Sintered (K0.48Na0.52)NbO3 Ceramics,”
    <i>Japanese Journal of Applied Physics</i>, vol. 50, p. 07HC01, 2011.
  mla: Maeda, Takafumi, et al. “Improved Process for Hydrothermal Lead-Free Piezoelectric
    Powders and Performances of Sintered (K0.48Na0.52)NbO3 Ceramics.” <i>Japanese
    Journal of Applied Physics</i>, vol. 50, The Japan Society of Applied Physics,
    2011, p. 07HC01.
  short: T. Maeda, T. Hemsel, T. Morita, Japanese Journal of Applied Physics 50 (2011)
    07HC01.
date_created: 2019-05-13T11:00:23Z
date_updated: 2022-01-06T07:04:19Z
department:
- _id: '151'
intvolume: '        50'
language:
- iso: eng
page: 07HC01
publication: Japanese Journal of Applied Physics
publisher: The Japan Society of Applied Physics
quality_controlled: '1'
status: public
title: Improved Process for Hydrothermal Lead-Free Piezoelectric Powders and Performances
  of Sintered (K0.48Na0.52)NbO3 Ceramics
type: journal_article
user_id: '55222'
volume: 50
year: '2011'
...
---
_id: '9770'
abstract:
- lang: eng
  text: One cannot image today's life without mechatronic systems, which have to be
    developed in a joint effort by teams of mechanical engineers, electrical engineers,
    control engineers and software engineers. Often these systems are applied in safety
    critical environments like in cars or aircrafts. This requires systems that function
    correctly and do not cause hazardous situations. However, random errors due to
    wear or external influences cannot be completely excluded. Consequently, we have
    to perform a hazard analysis for the system. Further, the union of four disciplines
    in one system requires the development and analysis of the system as a whole.
    We present a component-based hazard analysis that considers the entire mechatronic
    system including hardware, i.e. mechanical and electrical components, and software
    components. Our approach considers the physical properties of different types
    of flow in mechatronic systems. We have identified reusable patterns for the failure
    behavior which can be generated automatically. This reduces the effort for the
    developer. As cycles, e.g. control cycles, are an internal part of every mechatronic
    system our approach is able to handle cycles. The presented approach has been
    applied to a real-life case study.
author:
- first_name: Claudia
  full_name: Priesterjahn, Claudia
  last_name: Priesterjahn
- first_name: Christoph
  full_name: Sondermann-Wölke, Christoph
  last_name: Sondermann-Wölke
- first_name: Mathias
  full_name: Tichy, Mathias
  last_name: Tichy
- first_name: Christian
  full_name: Hölscher, Christian
  last_name: Hölscher
citation:
  ama: 'Priesterjahn C, Sondermann-Wölke C, Tichy M, Hölscher C. Component-based Hazard
    Analysis for Mechatronic Systems. In: <i>Proc. of the 2nd IEEE International Workshop
    MoBE-RTES at the 14th IEEE International Symposium on Object/Component/Service-Oriented
    Real-Time Distributed Computing (ISORC)</i>. Newport Beach, USA (USA): IEEE Computer
    Society; 2011.'
  apa: 'Priesterjahn, C., Sondermann-Wölke, C., Tichy, M., &#38; Hölscher, C. (2011).
    Component-based Hazard Analysis for Mechatronic Systems. In <i>Proc. of the 2nd
    IEEE International Workshop MoBE-RTES at the 14th IEEE International Symposium
    on Object/Component/Service-oriented Real-time Distributed Computing (ISORC)</i>.
    Newport Beach, USA (USA): IEEE Computer Society.'
  bibtex: '@inproceedings{Priesterjahn_Sondermann-Wölke_Tichy_Hölscher_2011, place={Newport
    Beach, USA (USA)}, title={Component-based Hazard Analysis for Mechatronic Systems},
    booktitle={Proc. of the 2nd IEEE International Workshop MoBE-RTES at the 14th
    IEEE International Symposium on Object/Component/Service-oriented Real-time Distributed
    Computing (ISORC)}, publisher={IEEE Computer Society}, author={Priesterjahn, Claudia
    and Sondermann-Wölke, Christoph and Tichy, Mathias and Hölscher, Christian}, year={2011}
    }'
  chicago: 'Priesterjahn, Claudia, Christoph Sondermann-Wölke, Mathias Tichy, and
    Christian Hölscher. “Component-Based Hazard Analysis for Mechatronic Systems.”
    In <i>Proc. of the 2nd IEEE International Workshop MoBE-RTES at the 14th IEEE
    International Symposium on Object/Component/Service-Oriented Real-Time Distributed
    Computing (ISORC)</i>. Newport Beach, USA (USA): IEEE Computer Society, 2011.'
  ieee: C. Priesterjahn, C. Sondermann-Wölke, M. Tichy, and C. Hölscher, “Component-based
    Hazard Analysis for Mechatronic Systems,” in <i>Proc. of the 2nd IEEE International
    Workshop MoBE-RTES at the 14th IEEE International Symposium on Object/Component/Service-oriented
    Real-time Distributed Computing (ISORC)</i>, 2011.
  mla: Priesterjahn, Claudia, et al. “Component-Based Hazard Analysis for Mechatronic
    Systems.” <i>Proc. of the 2nd IEEE International Workshop MoBE-RTES at the 14th
    IEEE International Symposium on Object/Component/Service-Oriented Real-Time Distributed
    Computing (ISORC)</i>, IEEE Computer Society, 2011.
  short: 'C. Priesterjahn, C. Sondermann-Wölke, M. Tichy, C. Hölscher, in: Proc. of
    the 2nd IEEE International Workshop MoBE-RTES at the 14th IEEE International Symposium
    on Object/Component/Service-Oriented Real-Time Distributed Computing (ISORC),
    IEEE Computer Society, Newport Beach, USA (USA), 2011.'
date_created: 2019-05-13T11:01:13Z
date_updated: 2022-01-06T07:04:19Z
department:
- _id: '151'
language:
- iso: eng
place: Newport Beach, USA (USA)
publication: Proc. of the 2nd IEEE International Workshop MoBE-RTES at the 14th IEEE
  International Symposium on Object/Component/Service-oriented Real-time Distributed
  Computing (ISORC)
publisher: IEEE Computer Society
quality_controlled: '1'
status: public
title: Component-based Hazard Analysis for Mechatronic Systems
type: conference
user_id: '55222'
year: '2011'
...
---
_id: '9771'
abstract:
- lang: eng
  text: "Dieser Beitrag stellt ein Konzept vor, welches die Methode der Mehrzieloptimierung
    mit einer Online-Bewertung des aktuellen Systemzustands kombiniert. Dieses erlaubt
    Maßnahmen zur Zuverlässigkeitssteigerung abzuleiten. Das Konzept wird auf ein
    X-by-wire-Fahrzeug mit Einzelradaktorik angewandt. Dabei steht zunächst die Beeinflussung
    der Ziele der Mehrzieloptimierung zugunsten der Zuverlässigkeit des Systems im
    Vordergrund. In Simulationen wird gezeigt, dass über die Wahl und Gewichtung der
    Zielfunktionen die Quer- und Längskräfte an den Rädern vorteilhaft verteilt werden
    können. \r\n\r\nIn this contribution a concept is illustrated, which combines
    the multi-objective optimization technique with an online assessment of the current
    system state. This allows deriving measures to increase the reliability of the
    system. The concept is applied to an X-by-wire vehicle with single-wheel actuators.
    The emphasis is here mostly on the influence of the objectives of the multiobjective
    optimization for the benefit of the reliability of the system. It is demonstrated
    in simulations, that the lateral and longitudinal forces at the wheels can be
    distributed advantageously by the selection of the suitable objective functions
    and the appropriate weights."
author:
- first_name: Christoph
  full_name: Sondermann-Wölke, Christoph
  last_name: Sondermann-Wölke
- first_name: Walter
  full_name: Sextro, Walter
  id: '21220'
  last_name: Sextro
- first_name: Peter
  full_name: Reinold, Peter
  last_name: Reinold
- first_name: Ansgar
  full_name: Trächtler, Ansgar
  last_name: Trächtler
citation:
  ama: 'Sondermann-Wölke C, Sextro W, Reinold P, Trächtler A. Zuverlässigkeitsorientierte
    Mehrzieloptimierung zur Aktorrekonfiguration eines X-by-wire-Fahrzeugs. In: <i>25.
    Tagung Technische Zuverlässigkeit (TTZ 2011) - Entwicklung Und Betrieb Zuverlässiger
    Produkte</i>. Leonberg; 2011:291-302.'
  apa: Sondermann-Wölke, C., Sextro, W., Reinold, P., &#38; Trächtler, A. (2011).
    Zuverlässigkeitsorientierte Mehrzieloptimierung zur Aktorrekonfiguration eines
    X-by-wire-Fahrzeugs. In <i>25. Tagung Technische Zuverlässigkeit (TTZ 2011) -
    Entwicklung und Betrieb zuverlässiger Produkte</i> (pp. 291–302). Leonberg.
  bibtex: '@inproceedings{Sondermann-Wölke_Sextro_Reinold_Trächtler_2011, place={Leonberg},
    title={Zuverlässigkeitsorientierte Mehrzieloptimierung zur Aktorrekonfiguration
    eines X-by-wire-Fahrzeugs}, booktitle={25. Tagung Technische Zuverlässigkeit (TTZ
    2011) - Entwicklung und Betrieb zuverlässiger Produkte}, author={Sondermann-Wölke,
    Christoph and Sextro, Walter and Reinold, Peter and Trächtler, Ansgar}, year={2011},
    pages={291–302} }'
  chicago: Sondermann-Wölke, Christoph, Walter Sextro, Peter Reinold, and Ansgar Trächtler.
    “Zuverlässigkeitsorientierte Mehrzieloptimierung Zur Aktorrekonfiguration Eines
    X-by-Wire-Fahrzeugs.” In <i>25. Tagung Technische Zuverlässigkeit (TTZ 2011) -
    Entwicklung Und Betrieb Zuverlässiger Produkte</i>, 291–302. Leonberg, 2011.
  ieee: C. Sondermann-Wölke, W. Sextro, P. Reinold, and A. Trächtler, “Zuverlässigkeitsorientierte
    Mehrzieloptimierung zur Aktorrekonfiguration eines X-by-wire-Fahrzeugs,” in <i>25.
    Tagung Technische Zuverlässigkeit (TTZ 2011) - Entwicklung und Betrieb zuverlässiger
    Produkte</i>, 2011, pp. 291–302.
  mla: Sondermann-Wölke, Christoph, et al. “Zuverlässigkeitsorientierte Mehrzieloptimierung
    Zur Aktorrekonfiguration Eines X-by-Wire-Fahrzeugs.” <i>25. Tagung Technische
    Zuverlässigkeit (TTZ 2011) - Entwicklung Und Betrieb Zuverlässiger Produkte</i>,
    2011, pp. 291–302.
  short: 'C. Sondermann-Wölke, W. Sextro, P. Reinold, A. Trächtler, in: 25. Tagung
    Technische Zuverlässigkeit (TTZ 2011) - Entwicklung Und Betrieb Zuverlässiger
    Produkte, Leonberg, 2011, pp. 291–302.'
date_created: 2019-05-13T11:04:04Z
date_updated: 2022-01-06T07:04:19Z
department:
- _id: '151'
language:
- iso: eng
page: 291-302
place: Leonberg
publication: 25. Tagung Technische Zuverlässigkeit (TTZ 2011) - Entwicklung und Betrieb
  zuverlässiger Produkte
status: public
title: Zuverlässigkeitsorientierte Mehrzieloptimierung zur Aktorrekonfiguration eines
  X-by-wire-Fahrzeugs
type: conference
user_id: '55222'
year: '2011'
...
---
_id: '9772'
abstract:
- lang: eng
  text: 'A profound description of friction in wheel--rail contact plays an essential
    role for optimization of traction control strategies, as input quantity for railway
    simulations in general and for the estimation of wear and rolling contact fatigue.
    A multitude of wheel--rail contact models exists, however, traction--creepage
    curves obtained from measurements show quantitative and qualitative deviations.
    There are several phenomena which influence the traction--creepage characteristics:
    Mechanisms resulting from surface roughness, frictional heating or the presence
    of interfacial fluids can have a dominating influence on friction. In this paper,
    a new wheel--rail contact model, accounting for these influential parameters,
    will be presented. The presented model accounts for the interaction of an interfacial
    fluid model for combined boundary and mixed lubrication of rough surfaces with
    a wheel--rail contact model that additionally accounts for frictional heating.
    A quantitative comparison with measurements found in the literature is not conducted,
    since the exact conditions of the measurements are mostly unknown and parameters
    can easily be adjusted to fit the measurements. Emphasis is placed on the qualitative
    behavior of the model with respect to the measurements and good agreement is found.
    The dependence of the maximum traction coefficient on rolling velocity, surface
    roughness and normal load is studied under dry and water lubricated conditions.'
author:
- first_name: Christoph
  full_name: Tomberger, Christoph
  last_name: Tomberger
- first_name: Peter
  full_name: Dietmaier, Peter
  last_name: Dietmaier
- first_name: Walter
  full_name: Sextro, Walter
  id: '21220'
  last_name: Sextro
- first_name: Klaus
  full_name: Six, Klaus
  last_name: Six
citation:
  ama: 'Tomberger C, Dietmaier P, Sextro W, Six K. Friction in wheel--rail contact:
    A model comprising interfacial fluids, surface roughness and temperature. <i>Wear</i>.
    2011;271:2-12. doi:<a href="https://doi.org/10.1016/j.wear.2010.10.025">10.1016/j.wear.2010.10.025</a>'
  apa: 'Tomberger, C., Dietmaier, P., Sextro, W., &#38; Six, K. (2011). Friction in
    wheel--rail contact: A model comprising interfacial fluids, surface roughness
    and temperature. <i>Wear</i>, <i>271</i>, 2–12. <a href="https://doi.org/10.1016/j.wear.2010.10.025">https://doi.org/10.1016/j.wear.2010.10.025</a>'
  bibtex: '@article{Tomberger_Dietmaier_Sextro_Six_2011, title={Friction in wheel--rail
    contact: A model comprising interfacial fluids, surface roughness and temperature},
    volume={271}, DOI={<a href="https://doi.org/10.1016/j.wear.2010.10.025">10.1016/j.wear.2010.10.025</a>},
    journal={Wear}, author={Tomberger, Christoph and Dietmaier, Peter and Sextro,
    Walter and Six, Klaus}, year={2011}, pages={2–12} }'
  chicago: 'Tomberger, Christoph, Peter Dietmaier, Walter Sextro, and Klaus Six. “Friction
    in Wheel--Rail Contact: A Model Comprising Interfacial Fluids, Surface Roughness
    and Temperature.” <i>Wear</i> 271 (2011): 2–12. <a href="https://doi.org/10.1016/j.wear.2010.10.025">https://doi.org/10.1016/j.wear.2010.10.025</a>.'
  ieee: 'C. Tomberger, P. Dietmaier, W. Sextro, and K. Six, “Friction in wheel--rail
    contact: A model comprising interfacial fluids, surface roughness and temperature,”
    <i>Wear</i>, vol. 271, pp. 2–12, 2011.'
  mla: 'Tomberger, Christoph, et al. “Friction in Wheel--Rail Contact: A Model Comprising
    Interfacial Fluids, Surface Roughness and Temperature.” <i>Wear</i>, vol. 271,
    2011, pp. 2–12, doi:<a href="https://doi.org/10.1016/j.wear.2010.10.025">10.1016/j.wear.2010.10.025</a>.'
  short: C. Tomberger, P. Dietmaier, W. Sextro, K. Six, Wear 271 (2011) 2–12.
date_created: 2019-05-13T11:08:32Z
date_updated: 2022-01-06T07:04:19Z
department:
- _id: '151'
doi: 10.1016/j.wear.2010.10.025
intvolume: '       271'
keyword:
- Wheel--rail contact
- Rolling contact
- Friction
- Interfacial fluid
- Lubrication
- Surface roughness
- Contact temperature
language:
- iso: eng
page: 2 - 12
publication: Wear
publication_identifier:
  issn:
  - 0043-1648
quality_controlled: '1'
status: public
title: 'Friction in wheel--rail contact: A model comprising interfacial fluids, surface
  roughness and temperature'
type: journal_article
user_id: '55222'
volume: 271
year: '2011'
...
---
_id: '9877'
author:
- first_name: Gaku
  full_name: Isobe, Gaku
  last_name: Isobe
- first_name: Peter
  full_name: Bornmann, Peter
  last_name: Bornmann
- first_name: Tobias
  full_name: Hemsel, Tobias
  id: '210'
  last_name: Hemsel
- first_name: Takeshi
  full_name: Morita, Takeshi
  last_name: Morita
citation:
  ama: Isobe G, Bornmann P, Hemsel T, Morita T. High temperature tolerant transducer
    for Ultrasonic Assisted Hydrothermal Method. <i>Proceedings of Symposium on Ultrasonic
    Electronics</i>. 2011;32:19-20.
  apa: Isobe, G., Bornmann, P., Hemsel, T., &#38; Morita, T. (2011). High temperature
    tolerant transducer for Ultrasonic Assisted Hydrothermal Method. <i>Proceedings
    of Symposium on Ultrasonic Electronics</i>, <i>32</i>, 19–20.
  bibtex: '@article{Isobe_Bornmann_Hemsel_Morita_2011, title={High temperature tolerant
    transducer for Ultrasonic Assisted Hydrothermal Method}, volume={32}, journal={Proceedings
    of Symposium on Ultrasonic Electronics}, publisher={Trans Tech Publ}, author={Isobe,
    Gaku and Bornmann, Peter and Hemsel, Tobias and Morita, Takeshi}, year={2011},
    pages={19–20} }'
  chicago: 'Isobe, Gaku, Peter Bornmann, Tobias Hemsel, and Takeshi Morita. “High
    Temperature Tolerant Transducer for Ultrasonic Assisted Hydrothermal Method.”
    <i>Proceedings of Symposium on Ultrasonic Electronics</i> 32 (2011): 19–20.'
  ieee: G. Isobe, P. Bornmann, T. Hemsel, and T. Morita, “High temperature tolerant
    transducer for Ultrasonic Assisted Hydrothermal Method,” <i>Proceedings of Symposium
    on Ultrasonic Electronics</i>, vol. 32, pp. 19–20, 2011.
  mla: Isobe, Gaku, et al. “High Temperature Tolerant Transducer for Ultrasonic Assisted
    Hydrothermal Method.” <i>Proceedings of Symposium on Ultrasonic Electronics</i>,
    vol. 32, Trans Tech Publ, 2011, pp. 19–20.
  short: G. Isobe, P. Bornmann, T. Hemsel, T. Morita, Proceedings of Symposium on
    Ultrasonic Electronics 32 (2011) 19–20.
date_created: 2019-05-20T13:09:04Z
date_updated: 2019-09-16T11:31:38Z
department:
- _id: '151'
intvolume: '        32'
language:
- iso: eng
page: 19-20
publication: Proceedings of Symposium on Ultrasonic Electronics
publisher: Trans Tech Publ
quality_controlled: '1'
status: public
title: High temperature tolerant transducer for Ultrasonic Assisted Hydrothermal Method
type: journal_article
user_id: '55222'
volume: 32
year: '2011'
...
---
_id: '4157'
author:
- first_name: Burkhard
  full_name: Hehenkamp, Burkhard
  id: '37339'
  last_name: Hehenkamp
- first_name: Oddvar
  full_name: Kaarboe, Oddvar
  last_name: Kaarboe
citation:
  ama: Hehenkamp B, Kaarboe O. Paying for Performance in Hospitals. <i>Economic Analysis
    and Policy</i>. 2011;41(1):49-70. doi:<a href="https://doi.org/10.1016/s0313-5926(11)50004-9">10.1016/s0313-5926(11)50004-9</a>
  apa: Hehenkamp, B., &#38; Kaarboe, O. (2011). Paying for Performance in Hospitals.
    <i>Economic Analysis and Policy</i>, <i>41</i>(1), 49–70. <a href="https://doi.org/10.1016/s0313-5926(11)50004-9">https://doi.org/10.1016/s0313-5926(11)50004-9</a>
  bibtex: '@article{Hehenkamp_Kaarboe_2011, title={Paying for Performance in Hospitals},
    volume={41}, DOI={<a href="https://doi.org/10.1016/s0313-5926(11)50004-9">10.1016/s0313-5926(11)50004-9</a>},
    number={1}, journal={Economic Analysis and Policy}, publisher={Elsevier BV}, author={Hehenkamp,
    Burkhard and Kaarboe, Oddvar}, year={2011}, pages={49–70} }'
  chicago: 'Hehenkamp, Burkhard, and Oddvar Kaarboe. “Paying for Performance in Hospitals.”
    <i>Economic Analysis and Policy</i> 41, no. 1 (2011): 49–70. <a href="https://doi.org/10.1016/s0313-5926(11)50004-9">https://doi.org/10.1016/s0313-5926(11)50004-9</a>.'
  ieee: B. Hehenkamp and O. Kaarboe, “Paying for Performance in Hospitals,” <i>Economic
    Analysis and Policy</i>, vol. 41, no. 1, pp. 49–70, 2011.
  mla: Hehenkamp, Burkhard, and Oddvar Kaarboe. “Paying for Performance in Hospitals.”
    <i>Economic Analysis and Policy</i>, vol. 41, no. 1, Elsevier BV, 2011, pp. 49–70,
    doi:<a href="https://doi.org/10.1016/s0313-5926(11)50004-9">10.1016/s0313-5926(11)50004-9</a>.
  short: B. Hehenkamp, O. Kaarboe, Economic Analysis and Policy 41 (2011) 49–70.
date_created: 2018-08-27T15:08:06Z
date_updated: 2022-01-06T07:00:26Z
department:
- _id: '280'
- _id: '475'
doi: 10.1016/s0313-5926(11)50004-9
extern: '1'
intvolume: '        41'
issue: '1'
page: 49-70
publication: Economic Analysis and Policy
publication_identifier:
  issn:
  - 0313-5926
publication_status: published
publisher: Elsevier BV
status: public
title: Paying for Performance in Hospitals
type: journal_article
user_id: '37339'
volume: 41
year: '2011'
...
---
_id: '650'
author:
- first_name: Marie Christin
  full_name: Platenius, Marie Christin
  last_name: Platenius
citation:
  ama: Platenius MC. <i>Reengineering of Design Deficiencies in Component-Based Software
    Architectures</i>. Universität Paderborn; 2011.
  apa: Platenius, M. C. (2011). <i>Reengineering of Design Deficiencies in Component-Based
    Software Architectures</i>. Universität Paderborn.
  bibtex: '@book{Platenius_2011, title={Reengineering of Design Deficiencies in Component-Based
    Software Architectures}, publisher={Universität Paderborn}, author={Platenius,
    Marie Christin}, year={2011} }'
  chicago: Platenius, Marie Christin. <i>Reengineering of Design Deficiencies in Component-Based
    Software Architectures</i>. Universität Paderborn, 2011.
  ieee: M. C. Platenius, <i>Reengineering of Design Deficiencies in Component-Based
    Software Architectures</i>. Universität Paderborn, 2011.
  mla: Platenius, Marie Christin. <i>Reengineering of Design Deficiencies in Component-Based
    Software Architectures</i>. Universität Paderborn, 2011.
  short: M.C. Platenius, Reengineering of Design Deficiencies in Component-Based Software
    Architectures, Universität Paderborn, 2011.
date_created: 2017-10-17T12:42:58Z
date_updated: 2022-01-06T07:03:08Z
department:
- _id: '76'
language:
- iso: eng
project:
- _id: '1'
  name: SFB 901
- _id: '9'
  name: SFB 901 - Subprojekt B1
- _id: '3'
  name: SFB 901 - Project Area B
publisher: Universität Paderborn
status: public
title: Reengineering of Design Deficiencies in Component-Based Software Architectures
type: mastersthesis
user_id: '477'
year: '2011'
...
---
_id: '652'
abstract:
- lang: eng
  text: In the development process of service-oriented systems, business process models
    are used at different levels. Typically, high-level business process models that
    describe business requirements and needs are stepwise refined to the IT level
    by different business modelers and software architects. As a result, different
    process model versions must be compared and merged by means of model version control.
    An important prerequisite for process model version control is an elaborated matching
    approach that results in precise mappings between different process model versions.
    The challenge of such an approach is to deal with syntactically different process
    models that are semantically equivalent. For that purpose, matching techniques
    must consider the semantics of process modeling languages.In this paper, we present
    a matching approach for process models in a versioning scenario. Based on a term
    formalization of process models, we enable an efficient and effective way to match
    syntactically different but semantically equivalent process models resulting in
    precise mappings.
author:
- first_name: Christian
  full_name: Gerth, Christian
  last_name: Gerth
- first_name: Markus
  full_name: Luckey, Markus
  last_name: Luckey
- first_name: Jochen
  full_name: Küster, Jochen
  last_name: Küster
- first_name: Gregor
  full_name: Engels, Gregor
  id: '107'
  last_name: Engels
citation:
  ama: 'Gerth C, Luckey M, Küster J, Engels G. Precise Mappings between Business Process
    Models in Versioning Scenarios. In: <i>Proceedings of the IEEE 8th International
    Conference on Service Computingt (SCC)</i>. ; 2011:218--225. doi:<a href="https://doi.org/10.1109/SCC.2011.65">10.1109/SCC.2011.65</a>'
  apa: Gerth, C., Luckey, M., Küster, J., &#38; Engels, G. (2011). Precise Mappings
    between Business Process Models in Versioning Scenarios. In <i>Proceedings of
    the IEEE 8th International Conference on Service Computingt (SCC)</i> (pp. 218--225).
    <a href="https://doi.org/10.1109/SCC.2011.65">https://doi.org/10.1109/SCC.2011.65</a>
  bibtex: '@inproceedings{Gerth_Luckey_Küster_Engels_2011, title={Precise Mappings
    between Business Process Models in Versioning Scenarios}, DOI={<a href="https://doi.org/10.1109/SCC.2011.65">10.1109/SCC.2011.65</a>},
    booktitle={Proceedings of the IEEE 8th International Conference on Service Computingt
    (SCC)}, author={Gerth, Christian and Luckey, Markus and Küster, Jochen and Engels,
    Gregor}, year={2011}, pages={218--225} }'
  chicago: Gerth, Christian, Markus Luckey, Jochen Küster, and Gregor Engels. “Precise
    Mappings between Business Process Models in Versioning Scenarios.” In <i>Proceedings
    of the IEEE 8th International Conference on Service Computingt (SCC)</i>, 218--225,
    2011. <a href="https://doi.org/10.1109/SCC.2011.65">https://doi.org/10.1109/SCC.2011.65</a>.
  ieee: C. Gerth, M. Luckey, J. Küster, and G. Engels, “Precise Mappings between Business
    Process Models in Versioning Scenarios,” in <i>Proceedings of the IEEE 8th International
    Conference on Service Computingt (SCC)</i>, 2011, pp. 218--225.
  mla: Gerth, Christian, et al. “Precise Mappings between Business Process Models
    in Versioning Scenarios.” <i>Proceedings of the IEEE 8th International Conference
    on Service Computingt (SCC)</i>, 2011, pp. 218--225, doi:<a href="https://doi.org/10.1109/SCC.2011.65">10.1109/SCC.2011.65</a>.
  short: 'C. Gerth, M. Luckey, J. Küster, G. Engels, in: Proceedings of the IEEE 8th
    International Conference on Service Computingt (SCC), 2011, pp. 218--225.'
date_created: 2017-10-17T12:42:59Z
date_updated: 2022-01-06T07:03:10Z
ddc:
- '040'
department:
- _id: '66'
doi: 10.1109/SCC.2011.65
file:
- access_level: closed
  content_type: application/pdf
  creator: florida
  date_created: 2018-03-14T13:53:51Z
  date_updated: 2018-03-14T13:53:51Z
  file_id: '1223'
  file_name: 652-06009264.pdf
  file_size: 713943
  relation: main_file
  success: 1
file_date_updated: 2018-03-14T13:53:51Z
has_accepted_license: '1'
language:
- iso: eng
page: 218--225
project:
- _id: '1'
  name: SFB 901
- _id: '9'
  name: SFB 901 - Subprojekt B1
- _id: '3'
  name: SFB 901 - Project Area B
publication: Proceedings of the IEEE 8th International Conference on Service Computingt
  (SCC)
status: public
title: Precise Mappings between Business Process Models in Versioning Scenarios
type: conference
user_id: '477'
year: '2011'
...
---
_id: '661'
author:
- first_name: Svetlana
  full_name: Arifulina, Svetlana
  last_name: Arifulina
citation:
  ama: Arifulina S. <i>Coverage Criteria for Testing DMM Specifications</i>. Universität
    Paderborn; 2011.
  apa: Arifulina, S. (2011). <i>Coverage Criteria for Testing DMM Specifications</i>.
    Universität Paderborn.
  bibtex: '@book{Arifulina_2011, title={Coverage Criteria for Testing DMM Specifications},
    publisher={Universität Paderborn}, author={Arifulina, Svetlana}, year={2011} }'
  chicago: Arifulina, Svetlana. <i>Coverage Criteria for Testing DMM Specifications</i>.
    Universität Paderborn, 2011.
  ieee: S. Arifulina, <i>Coverage Criteria for Testing DMM Specifications</i>. Universität
    Paderborn, 2011.
  mla: Arifulina, Svetlana. <i>Coverage Criteria for Testing DMM Specifications</i>.
    Universität Paderborn, 2011.
  short: S. Arifulina, Coverage Criteria for Testing DMM Specifications, Universität
    Paderborn, 2011.
date_created: 2017-10-17T12:43:00Z
date_updated: 2022-01-06T07:03:13Z
department:
- _id: '66'
language:
- iso: eng
project:
- _id: '1'
  name: SFB 901
- _id: '9'
  name: SFB 901 - Subprojekt B1
- _id: '3'
  name: SFB 901 - Project Area B
publisher: Universität Paderborn
status: public
supervisor:
- first_name: Gregor
  full_name: Engels, Gregor
  id: '107'
  last_name: Engels
title: Coverage Criteria for Testing DMM Specifications
type: mastersthesis
user_id: '477'
year: '2011'
...
---
_id: '6886'
author:
- first_name: S.
  full_name: Koch, S.
  last_name: Koch
- first_name: J.
  full_name: Kupke, J.
  last_name: Kupke
- first_name: D.
  full_name: Tomow, D.
  last_name: Tomow
- first_name: M.
  full_name: Schoppa, M.
  last_name: Schoppa
- first_name: Paul
  full_name: Grunow, Paul
  last_name: Grunow
- first_name: Stefan
  full_name: Krauter, Stefan
  id: '28836'
  last_name: Krauter
  orcid: 0000-0002-3594-260X
citation:
  ama: 'Koch S, Kupke J, Tomow D, Schoppa M, Grunow P, Krauter S. Polarisation Effects
    and Tests for Crystalline Silicon Cells. In: <i>Proceedings of the 26th European
    Photovoltaic Solar Energy Conference and Exhibition</i>. ; 2011.'
  apa: Koch, S., Kupke, J., Tomow, D., Schoppa, M., Grunow, P., &#38; Krauter, S.
    (2011). Polarisation Effects and Tests for Crystalline Silicon Cells. In <i>Proceedings
    of the 26th European Photovoltaic Solar Energy Conference and Exhibition</i>.
  bibtex: '@inproceedings{Koch_Kupke_Tomow_Schoppa_Grunow_Krauter_2011, title={Polarisation
    Effects and Tests for Crystalline Silicon Cells}, booktitle={Proceedings of the
    26th European Photovoltaic Solar Energy Conference and Exhibition}, author={Koch,
    S. and Kupke, J. and Tomow, D. and Schoppa, M. and Grunow, Paul and Krauter, Stefan},
    year={2011} }'
  chicago: Koch, S., J. Kupke, D. Tomow, M. Schoppa, Paul Grunow, and Stefan Krauter.
    “Polarisation Effects and Tests for Crystalline Silicon Cells.” In <i>Proceedings
    of the 26th European Photovoltaic Solar Energy Conference and Exhibition</i>,
    2011.
  ieee: S. Koch, J. Kupke, D. Tomow, M. Schoppa, P. Grunow, and S. Krauter, “Polarisation
    Effects and Tests for Crystalline Silicon Cells,” in <i>Proceedings of the 26th
    European Photovoltaic Solar Energy Conference and Exhibition</i>, 2011.
  mla: Koch, S., et al. “Polarisation Effects and Tests for Crystalline Silicon Cells.”
    <i>Proceedings of the 26th European Photovoltaic Solar Energy Conference and Exhibition</i>,
    2011.
  short: 'S. Koch, J. Kupke, D. Tomow, M. Schoppa, P. Grunow, S. Krauter, in: Proceedings
    of the 26th European Photovoltaic Solar Energy Conference and Exhibition, 2011.'
conference:
  name: 26th European Photovoltaic Solar Energy Conference and Exhibition,  Hamburg
    (Deutschland), 5.-9. September 2011
date_created: 2019-01-21T07:15:10Z
date_updated: 2022-01-06T07:03:23Z
department:
- _id: '53'
language:
- iso: eng
publication: Proceedings of the 26th European Photovoltaic Solar Energy Conference
  and Exhibition
status: public
title: Polarisation Effects and Tests for Crystalline Silicon Cells
type: conference
user_id: '16148'
year: '2011'
...
---
_id: '6887'
author:
- first_name: A.
  full_name: Böttcher, A.
  last_name: Böttcher
- first_name: M.
  full_name: Horstmann, M.
  last_name: Horstmann
- first_name: Paul
  full_name: Grunow, Paul
  last_name: Grunow
- first_name: R.
  full_name: Pourhashemi, R.
  last_name: Pourhashemi
- first_name: Stefan
  full_name: Krauter, Stefan
  id: '28836'
  last_name: Krauter
  orcid: 0000-0002-3594-260X
citation:
  ama: 'Böttcher A, Horstmann M, Grunow P, Pourhashemi R, Krauter S. Spectral Mismatch
    Correction for Micromorph Tandem Modules. . In: <i>Proceedings of the 26th European
    Photovoltaic Solar Energy Conference and Exhibition</i>. ; 2011.'
  apa: Böttcher, A., Horstmann, M., Grunow, P., Pourhashemi, R., &#38; Krauter, S.
    (2011). Spectral Mismatch Correction for Micromorph Tandem Modules. . In <i>Proceedings
    of the 26th European Photovoltaic Solar Energy Conference and Exhibition</i>.
  bibtex: '@inproceedings{Böttcher_Horstmann_Grunow_Pourhashemi_Krauter_2011, title={Spectral
    Mismatch Correction for Micromorph Tandem Modules. }, booktitle={Proceedings of
    the 26th European Photovoltaic Solar Energy Conference and Exhibition}, author={Böttcher,
    A. and Horstmann, M. and Grunow, Paul and Pourhashemi, R. and Krauter, Stefan},
    year={2011} }'
  chicago: Böttcher, A., M. Horstmann, Paul Grunow, R. Pourhashemi, and Stefan Krauter.
    “Spectral Mismatch Correction for Micromorph Tandem Modules. .” In <i>Proceedings
    of the 26th European Photovoltaic Solar Energy Conference and Exhibition</i>,
    2011.
  ieee: A. Böttcher, M. Horstmann, P. Grunow, R. Pourhashemi, and S. Krauter, “Spectral
    Mismatch Correction for Micromorph Tandem Modules. ,” in <i>Proceedings of the
    26th European Photovoltaic Solar Energy Conference and Exhibition</i>, 2011.
  mla: Böttcher, A., et al. “Spectral Mismatch Correction for Micromorph Tandem Modules.
    .” <i>Proceedings of the 26th European Photovoltaic Solar Energy Conference and
    Exhibition</i>, 2011.
  short: 'A. Böttcher, M. Horstmann, P. Grunow, R. Pourhashemi, S. Krauter, in: Proceedings
    of the 26th European Photovoltaic Solar Energy Conference and Exhibition, 2011.'
conference:
  name: 26th European Photovoltaic Solar Energy Conference and Exhibition,  Hamburg
    (Deutschland), 5.-9. September 2011
date_created: 2019-01-21T07:17:40Z
date_updated: 2022-01-06T07:03:23Z
department:
- _id: '53'
language:
- iso: eng
publication: Proceedings of the 26th European Photovoltaic Solar Energy Conference
  and Exhibition
status: public
title: 'Spectral Mismatch Correction for Micromorph Tandem Modules. '
type: conference
user_id: '16148'
year: '2011'
...
---
_id: '6888'
author:
- first_name: T.
  full_name: Weber, T.
  last_name: Weber
- first_name: A.
  full_name: Albert, A.
  last_name: Albert
- first_name: Paul
  full_name: Grunow, Paul
  last_name: Grunow
- first_name: Stefan
  full_name: Krauter, Stefan
  id: '28836'
  last_name: Krauter
  orcid: 0000-0002-3594-260X
citation:
  ama: 'Weber T, Albert A, Grunow P, Krauter S. Electroluminescence Investigation
    on Thin Film Modules. In: <i>Proceedings of the 26th European Photovoltaic Solar
    Energy Conference and Exhibition</i>. ; 2011.'
  apa: Weber, T., Albert, A., Grunow, P., &#38; Krauter, S. (2011). Electroluminescence
    Investigation on Thin Film Modules. In <i>Proceedings of the 26th European Photovoltaic
    Solar Energy Conference and Exhibition</i>.
  bibtex: '@inproceedings{Weber_Albert_Grunow_Krauter_2011, title={Electroluminescence
    Investigation on Thin Film Modules}, booktitle={Proceedings of the 26th European
    Photovoltaic Solar Energy Conference and Exhibition}, author={Weber, T. and Albert,
    A. and Grunow, Paul and Krauter, Stefan}, year={2011} }'
  chicago: Weber, T., A. Albert, Paul Grunow, and Stefan Krauter. “Electroluminescence
    Investigation on Thin Film Modules.” In <i>Proceedings of the 26th European Photovoltaic
    Solar Energy Conference and Exhibition</i>, 2011.
  ieee: T. Weber, A. Albert, P. Grunow, and S. Krauter, “Electroluminescence Investigation
    on Thin Film Modules,” in <i>Proceedings of the 26th European Photovoltaic Solar
    Energy Conference and Exhibition</i>, 2011.
  mla: Weber, T., et al. “Electroluminescence Investigation on Thin Film Modules.”
    <i>Proceedings of the 26th European Photovoltaic Solar Energy Conference and Exhibition</i>,
    2011.
  short: 'T. Weber, A. Albert, P. Grunow, S. Krauter, in: Proceedings of the 26th
    European Photovoltaic Solar Energy Conference and Exhibition, 2011.'
conference:
  name: 26th European Photovoltaic Solar Energy Conference and Exhibition,  Hamburg
    (Deutschland), 5.-9. September 2011
date_created: 2019-01-21T07:19:23Z
date_updated: 2022-01-06T07:03:23Z
department:
- _id: '53'
language:
- iso: eng
publication: Proceedings of the 26th European Photovoltaic Solar Energy Conference
  and Exhibition
status: public
title: Electroluminescence Investigation on Thin Film Modules
type: conference
user_id: '16148'
year: '2011'
...
---
_id: '16798'
author:
- first_name: Achim
  full_name: Ebert, Achim
  last_name: Ebert
- first_name: Gitta
  full_name: Domik, Gitta
  id: '90'
  last_name: Domik
- first_name: Nahum
  full_name: D. Gershon, Nahum
  last_name: D. Gershon
- first_name: Gerrit
  full_name: C. van der Veer, Gerrit
  last_name: C. van der Veer
citation:
  ama: 'Ebert A, Domik G, D. Gershon N, C. van der Veer G. Building Bridges - HCI
    and Visualization. In: F. Campos P, C. Nicholas Graham T, A. Jorge J, Jardim Nunes
    N, A. Palanque P, Winckler M, eds. <i>Human-Computer Interaction - {INTERACT}
    2011 - 13th {IFIP} {TC} 13 International Conference, Lisbon, Portugal, September
    5-9, 2011, Proceedings, Part {IV}</i>. Vol 6949. Lecture Notes in Computer Science.
    Springer; 2011:722-723. doi:<a href="https://doi.org/10.1007/978-3-642-23768-3\_133">10.1007/978-3-642-23768-3\_133</a>'
  apa: Ebert, A., Domik, G., D. Gershon, N., &#38; C. van der Veer, G. (2011). Building
    Bridges - HCI and Visualization. In P. F. Campos, T. C. Nicholas Graham, J. A.
    Jorge, N. Jardim Nunes, P. A. Palanque, &#38; M. Winckler (Eds.), <i>Human-Computer
    Interaction - {INTERACT} 2011 - 13th {IFIP} {TC} 13 International Conference,
    Lisbon, Portugal, September 5-9, 2011, Proceedings, Part {IV}</i> (Vol. 6949,
    pp. 722–723). Springer. <a href="https://doi.org/10.1007/978-3-642-23768-3\_133">https://doi.org/10.1007/978-3-642-23768-3\_133</a>
  bibtex: '@inproceedings{Ebert_Domik_D. Gershon_C. van der Veer_2011, series={Lecture
    Notes in Computer Science}, title={Building Bridges - HCI and Visualization},
    volume={6949}, DOI={<a href="https://doi.org/10.1007/978-3-642-23768-3\_133">10.1007/978-3-642-23768-3\_133</a>},
    booktitle={Human-Computer Interaction - {INTERACT} 2011 - 13th {IFIP} {TC} 13
    International Conference, Lisbon, Portugal, September 5-9, 2011, Proceedings,
    Part {IV}}, publisher={Springer}, author={Ebert, Achim and Domik, Gitta and D.
    Gershon, Nahum and C. van der Veer, Gerrit}, editor={F. Campos, Pedro and C. Nicholas
    Graham, T. and A. Jorge, Joaquim and Jardim Nunes, Nuno and A. Palanque, Philippe
    and Winckler, MarcoEditors}, year={2011}, pages={722–723}, collection={Lecture
    Notes in Computer Science} }'
  chicago: Ebert, Achim, Gitta Domik, Nahum D. Gershon, and Gerrit C. van der Veer.
    “Building Bridges - HCI and Visualization.” In <i>Human-Computer Interaction -
    {INTERACT} 2011 - 13th {IFIP} {TC} 13 International Conference, Lisbon, Portugal,
    September 5-9, 2011, Proceedings, Part {IV}</i>, edited by Pedro F. Campos, T.
    C. Nicholas Graham, Joaquim A. Jorge, Nuno Jardim Nunes, Philippe A. Palanque,
    and Marco Winckler, 6949:722–23. Lecture Notes in Computer Science. Springer,
    2011. <a href="https://doi.org/10.1007/978-3-642-23768-3\_133">https://doi.org/10.1007/978-3-642-23768-3\_133</a>.
  ieee: A. Ebert, G. Domik, N. D. Gershon, and G. C. van der Veer, “Building Bridges
    - HCI and Visualization,” in <i>Human-Computer Interaction - {INTERACT} 2011 -
    13th {IFIP} {TC} 13 International Conference, Lisbon, Portugal, September 5-9,
    2011, Proceedings, Part {IV}</i>, 2011, vol. 6949, pp. 722–723.
  mla: Ebert, Achim, et al. “Building Bridges - HCI and Visualization.” <i>Human-Computer
    Interaction - {INTERACT} 2011 - 13th {IFIP} {TC} 13 International Conference,
    Lisbon, Portugal, September 5-9, 2011, Proceedings, Part {IV}</i>, edited by Pedro
    F. Campos et al., vol. 6949, Springer, 2011, pp. 722–23, doi:<a href="https://doi.org/10.1007/978-3-642-23768-3\_133">10.1007/978-3-642-23768-3\_133</a>.
  short: 'A. Ebert, G. Domik, N. D. Gershon, G. C. van der Veer, in: P. F. Campos,
    T. C. Nicholas Graham, J. A. Jorge, N. Jardim Nunes, P. A. Palanque, M. Winckler
    (Eds.), Human-Computer Interaction - {INTERACT} 2011 - 13th {IFIP} {TC} 13 International
    Conference, Lisbon, Portugal, September 5-9, 2011, Proceedings, Part {IV}, Springer,
    2011, pp. 722–723.'
date_created: 2020-04-22T07:29:53Z
date_updated: 2022-01-06T06:52:56Z
department:
- _id: '65'
doi: 10.1007/978-3-642-23768-3\_133
editor:
- first_name: Pedro
  full_name: F. Campos, Pedro
  last_name: F. Campos
- first_name: T.
  full_name: C. Nicholas Graham, T.
  last_name: C. Nicholas Graham
- first_name: Joaquim
  full_name: A. Jorge, Joaquim
  last_name: A. Jorge
- first_name: Nuno
  full_name: Jardim Nunes, Nuno
  last_name: Jardim Nunes
- first_name: Philippe
  full_name: A. Palanque, Philippe
  last_name: A. Palanque
- first_name: Marco
  full_name: Winckler, Marco
  last_name: Winckler
intvolume: '      6949'
language:
- iso: eng
page: 722-723
publication: Human-Computer Interaction - {INTERACT} 2011 - 13th {IFIP} {TC} 13 International
  Conference, Lisbon, Portugal, September 5-9, 2011, Proceedings, Part {IV}
publisher: Springer
series_title: Lecture Notes in Computer Science
status: public
title: Building Bridges - HCI and Visualization
type: conference
user_id: '14955'
volume: 6949
year: '2011'
...
---
_id: '15969'
author:
- first_name: Christian
  full_name: Lauter, Christian
  last_name: Lauter
- first_name: M.
  full_name: Sarrazin, M.
  last_name: Sarrazin
- first_name: Thomas
  full_name: Tröster, Thomas
  id: '553'
  last_name: Tröster
citation:
  ama: Lauter C, Sarrazin M, Tröster T. Multimaterialsysteme höchstfest verbunden.
    <i>Adhäsion – Kleben und Dichten</i>. 2011;3/2011:39-43.
  apa: Lauter, C., Sarrazin, M., &#38; Tröster, T. (2011). Multimaterialsysteme höchstfest
    verbunden. <i>Adhäsion – Kleben und Dichten</i>, <i>3/2011</i>, 39–43.
  bibtex: '@article{Lauter_Sarrazin_Tröster_2011, title={Multimaterialsysteme höchstfest
    verbunden}, volume={3/2011}, journal={Adhäsion – Kleben und Dichten}, publisher={Springer
    Vieweg}, author={Lauter, Christian and Sarrazin, M. and Tröster, Thomas}, year={2011},
    pages={39–43} }'
  chicago: 'Lauter, Christian, M. Sarrazin, and Thomas Tröster. “Multimaterialsysteme
    höchstfest verbunden.” <i>Adhäsion – Kleben und Dichten</i> 3/2011 (2011): 39–43.'
  ieee: C. Lauter, M. Sarrazin, and T. Tröster, “Multimaterialsysteme höchstfest verbunden,”
    <i>Adhäsion – Kleben und Dichten</i>, vol. 3/2011, pp. 39–43, 2011.
  mla: Lauter, Christian, et al. “Multimaterialsysteme höchstfest verbunden.” <i>Adhäsion
    – Kleben und Dichten</i>, vol. 3/2011, Springer Vieweg, 2011, pp. 39–43.
  short: C. Lauter, M. Sarrazin, T. Tröster, Adhäsion – Kleben und Dichten 3/2011
    (2011) 39–43.
date_created: 2020-02-21T15:07:12Z
date_updated: 2022-01-06T06:52:41Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: ger
page: 39-43
publication: Adhäsion – Kleben und Dichten
publisher: Springer Vieweg
status: public
title: Multimaterialsysteme höchstfest verbunden
type: journal_article
user_id: '72008'
volume: 3/2011
year: '2011'
...
---
_id: '15971'
author:
- first_name: Meike
  full_name: Frantz, Meike
  last_name: Frantz
- first_name: O.
  full_name: Stübbe, O.
  last_name: Stübbe
- first_name: Christian
  full_name: Lauter, Christian
  last_name: Lauter
- first_name: J.
  full_name: Schrange, J.
  last_name: Schrange
- first_name: Thomas
  full_name: Tröster, Thomas
  id: '553'
  last_name: Tröster
citation:
  ama: 'Frantz M, Stübbe O, Lauter C, Schrange J, Tröster T. Mechatronisches System
    zur Bestimmung der Restlebensdauer von Faserverbund-Leichtbaustrukturen am Beispiel
    einer Lauffeder. In: ; 2011.'
  apa: Frantz, M., Stübbe, O., Lauter, C., Schrange, J., &#38; Tröster, T. (2011).
    Mechatronisches System zur Bestimmung der Restlebensdauer von Faserverbund-Leichtbaustrukturen
    am Beispiel einer Lauffeder. Presented at the InnoMateria – Interdisziplinäre
    Kongressmesse für innovative Werkstoffe, Köln.
  bibtex: '@inproceedings{Frantz_Stübbe_Lauter_Schrange_Tröster_2011, title={Mechatronisches
    System zur Bestimmung der Restlebensdauer von Faserverbund-Leichtbaustrukturen
    am Beispiel einer Lauffeder}, author={Frantz, Meike and Stübbe, O. and Lauter,
    Christian and Schrange, J. and Tröster, Thomas}, year={2011} }'
  chicago: Frantz, Meike, O. Stübbe, Christian Lauter, J. Schrange, and Thomas Tröster.
    “Mechatronisches System zur Bestimmung der Restlebensdauer von Faserverbund-Leichtbaustrukturen
    am Beispiel einer Lauffeder,” 2011.
  ieee: M. Frantz, O. Stübbe, C. Lauter, J. Schrange, and T. Tröster, “Mechatronisches
    System zur Bestimmung der Restlebensdauer von Faserverbund-Leichtbaustrukturen
    am Beispiel einer Lauffeder,” presented at the InnoMateria – Interdisziplinäre
    Kongressmesse für innovative Werkstoffe, Köln, 2011.
  mla: Frantz, Meike, et al. <i>Mechatronisches System zur Bestimmung der Restlebensdauer
    von Faserverbund-Leichtbaustrukturen am Beispiel einer Lauffeder</i>. 2011.
  short: 'M. Frantz, O. Stübbe, C. Lauter, J. Schrange, T. Tröster, in: 2011.'
conference:
  end_date: 2011-03-16
  location: Köln
  name: InnoMateria – Interdisziplinäre Kongressmesse für innovative Werkstoffe
  start_date: 2011-03-15
date_created: 2020-02-21T15:17:59Z
date_updated: 2022-01-06T06:52:41Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: ger
status: public
title: Mechatronisches System zur Bestimmung der Restlebensdauer von Faserverbund-Leichtbaustrukturen
  am Beispiel einer Lauffeder
type: conference
user_id: '72008'
year: '2011'
...
---
_id: '15972'
author:
- first_name: D.
  full_name: Thomas, D.
  last_name: Thomas
- first_name: H.
  full_name: Block, H.
  last_name: Block
- first_name: Thomas
  full_name: Tröster, Thomas
  id: '553'
  last_name: Tröster
- first_name: J.
  full_name: Krogmeier, J.
  last_name: Krogmeier
citation:
  ama: 'Thomas D, Block H, Tröster T, Krogmeier J. Herstellung von belastungsgerechten
    Strukturbauteilen mittels partieller induktiver Härtung. In: ; 2011.'
  apa: Thomas, D., Block, H., Tröster, T., &#38; Krogmeier, J. (2011). Herstellung
    von belastungsgerechten Strukturbauteilen mittels partieller induktiver Härtung.
    Presented at the InnoMateria – Interdisziplinäre Kongressmesse für innovative
    Werkstoffe, Köln.
  bibtex: '@inproceedings{Thomas_Block_Tröster_Krogmeier_2011, title={Herstellung
    von belastungsgerechten Strukturbauteilen mittels partieller induktiver Härtung},
    author={Thomas, D. and Block, H. and Tröster, Thomas and Krogmeier, J.}, year={2011}
    }'
  chicago: Thomas, D., H. Block, Thomas Tröster, and J. Krogmeier. “Herstellung von
    belastungsgerechten Strukturbauteilen mittels partieller induktiver Härtung,”
    2011.
  ieee: D. Thomas, H. Block, T. Tröster, and J. Krogmeier, “Herstellung von belastungsgerechten
    Strukturbauteilen mittels partieller induktiver Härtung,” presented at the InnoMateria
    – Interdisziplinäre Kongressmesse für innovative Werkstoffe, Köln, 2011.
  mla: Thomas, D., et al. <i>Herstellung von belastungsgerechten Strukturbauteilen
    mittels partieller induktiver Härtung</i>. 2011.
  short: 'D. Thomas, H. Block, T. Tröster, J. Krogmeier, in: 2011.'
conference:
  end_date: 2011-03-16
  location: Köln
  name: InnoMateria – Interdisziplinäre Kongressmesse für innovative Werkstoffe
  start_date: 2011-03-15
date_created: 2020-02-21T15:20:49Z
date_updated: 2022-01-06T06:52:41Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: ger
status: public
title: Herstellung von belastungsgerechten Strukturbauteilen mittels partieller induktiver
  Härtung
type: conference
user_id: '72008'
year: '2011'
...
---
_id: '15974'
author:
- first_name: Thorsten
  full_name: Marten, Thorsten
  id: '338'
  last_name: Marten
- first_name: Christian
  full_name: Lauter, Christian
  last_name: Lauter
- first_name: Thomas
  full_name: Tröster, Thomas
  id: '553'
  last_name: Tröster
citation:
  ama: Marten T, Lauter C, Tröster T. Automobilleichtbau durch höchstfeste Multimaterialsysteme.
    <i>Ingenieurspiegel</i>. 2011;2/2011:67-69.
  apa: Marten, T., Lauter, C., &#38; Tröster, T. (2011). Automobilleichtbau durch
    höchstfeste Multimaterialsysteme. <i>Ingenieurspiegel</i>, <i>2/2011</i>, 67–69.
  bibtex: '@article{Marten_Lauter_Tröster_2011, title={Automobilleichtbau durch höchstfeste
    Multimaterialsysteme}, volume={2/2011}, journal={Ingenieurspiegel}, publisher={Public
    Verlagsgesellschaft und Anzeigenagentur}, author={Marten, Thorsten and Lauter,
    Christian and Tröster, Thomas}, year={2011}, pages={67–69} }'
  chicago: 'Marten, Thorsten, Christian Lauter, and Thomas Tröster. “Automobilleichtbau
    durch höchstfeste Multimaterialsysteme.” <i>Ingenieurspiegel</i> 2/2011 (2011):
    67–69.'
  ieee: T. Marten, C. Lauter, and T. Tröster, “Automobilleichtbau durch höchstfeste
    Multimaterialsysteme,” <i>Ingenieurspiegel</i>, vol. 2/2011, pp. 67–69, 2011.
  mla: Marten, Thorsten, et al. “Automobilleichtbau durch höchstfeste Multimaterialsysteme.”
    <i>Ingenieurspiegel</i>, vol. 2/2011, Public Verlagsgesellschaft und Anzeigenagentur,
    2011, pp. 67–69.
  short: T. Marten, C. Lauter, T. Tröster, Ingenieurspiegel 2/2011 (2011) 67–69.
date_created: 2020-02-21T15:24:34Z
date_updated: 2022-01-06T06:52:41Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: ger
page: 67-69
publication: Ingenieurspiegel
publisher: Public Verlagsgesellschaft und Anzeigenagentur
status: public
title: Automobilleichtbau durch höchstfeste Multimaterialsysteme
type: journal_article
user_id: '72008'
volume: 2/2011
year: '2011'
...
---
_id: '15975'
author:
- first_name: Christian
  full_name: Lauter, Christian
  last_name: Lauter
- first_name: D.
  full_name: Thomas, D.
  last_name: Thomas
- first_name: Meike
  full_name: Frantz, Meike
  last_name: Frantz
- first_name: J.
  full_name: Niewel, J.
  last_name: Niewel
- first_name: Thomas
  full_name: Tröster, Thomas
  id: '553'
  last_name: Tröster
citation:
  ama: Lauter C, Thomas D, Frantz M, Niewel J, Tröster T. Belastungsangepasste Strukturbauteile
    für Automobile aus höchstfesten Werkstoffen und Hybridwerkstoffen. <i>Werkstoffe
    in der Fertigung – Die Fachzeitschrift für technische Führungskräfte</i>. 2011;2:6-7.
  apa: Lauter, C., Thomas, D., Frantz, M., Niewel, J., &#38; Tröster, T. (2011). Belastungsangepasste
    Strukturbauteile für Automobile aus höchstfesten Werkstoffen und Hybridwerkstoffen.
    <i>Werkstoffe in der Fertigung – Die Fachzeitschrift für technische Führungskräfte</i>,
    <i>2</i>, 6–7.
  bibtex: '@article{Lauter_Thomas_Frantz_Niewel_Tröster_2011, title={Belastungsangepasste
    Strukturbauteile für Automobile aus höchstfesten Werkstoffen und Hybridwerkstoffen},
    volume={2}, journal={Werkstoffe in der Fertigung – Die Fachzeitschrift für technische
    Führungskräfte}, publisher={HW-Verlag}, author={Lauter, Christian and Thomas,
    D. and Frantz, Meike and Niewel, J. and Tröster, Thomas}, year={2011}, pages={6–7}
    }'
  chicago: 'Lauter, Christian, D. Thomas, Meike Frantz, J. Niewel, and Thomas Tröster.
    “Belastungsangepasste Strukturbauteile für Automobile aus höchstfesten Werkstoffen
    und Hybridwerkstoffen.” <i>Werkstoffe in der Fertigung – Die Fachzeitschrift für
    technische Führungskräfte</i> 2 (2011): 6–7.'
  ieee: C. Lauter, D. Thomas, M. Frantz, J. Niewel, and T. Tröster, “Belastungsangepasste
    Strukturbauteile für Automobile aus höchstfesten Werkstoffen und Hybridwerkstoffen,”
    <i>Werkstoffe in der Fertigung – Die Fachzeitschrift für technische Führungskräfte</i>,
    vol. 2, pp. 6–7, 2011.
  mla: Lauter, Christian, et al. “Belastungsangepasste Strukturbauteile für Automobile
    aus höchstfesten Werkstoffen und Hybridwerkstoffen.” <i>Werkstoffe in der Fertigung
    – Die Fachzeitschrift für technische Führungskräfte</i>, vol. 2, HW-Verlag, 2011,
    pp. 6–7.
  short: C. Lauter, D. Thomas, M. Frantz, J. Niewel, T. Tröster, Werkstoffe in der
    Fertigung – Die Fachzeitschrift für technische Führungskräfte 2 (2011) 6–7.
date_created: 2020-02-21T15:28:10Z
date_updated: 2022-01-06T06:52:41Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
intvolume: '         2'
language:
- iso: ger
page: 6-7
publication: Werkstoffe in der Fertigung – Die Fachzeitschrift für technische Führungskräfte
publisher: HW-Verlag
status: public
title: Belastungsangepasste Strukturbauteile für Automobile aus höchstfesten Werkstoffen
  und Hybridwerkstoffen
type: journal_article
user_id: '72008'
volume: 2
year: '2011'
...