---
_id: '48662'
author:
- first_name: Volker
  full_name: Schöppner, Volker
  id: '20530'
  last_name: Schöppner
- first_name: J.
  full_name: Petzke, J.
  last_name: Petzke
citation:
  ama: 'Schöppner V, Petzke J. Dielectric Heating in the Vulcanization Process of
    Rubber Extrudates. In: ; 2023.'
  apa: Schöppner, V., &#38; Petzke, J. (2023). <i>Dielectric Heating in the Vulcanization
    Process of Rubber Extrudates</i>. Annual Technical Conference of the Society of
    Plastics Engineers (ANTEC), Denver, CO (USA).
  bibtex: '@inproceedings{Schöppner_Petzke_2023, place={Denver, CO (USA)}, title={Dielectric
    Heating in the Vulcanization Process of Rubber Extrudates}, author={Schöppner,
    Volker and Petzke, J.}, year={2023} }'
  chicago: Schöppner, Volker, and J. Petzke. “Dielectric Heating in the Vulcanization
    Process of Rubber Extrudates.” Denver, CO (USA), 2023.
  ieee: V. Schöppner and J. Petzke, “Dielectric Heating in the Vulcanization Process
    of Rubber Extrudates,” presented at the Annual Technical Conference of the Society
    of Plastics Engineers (ANTEC), Denver, CO (USA), 2023.
  mla: Schöppner, Volker, and J. Petzke. <i>Dielectric Heating in the Vulcanization
    Process of Rubber Extrudates</i>. 2023.
  short: 'V. Schöppner, J. Petzke, in: Denver, CO (USA), 2023.'
conference:
  location: Denver, CO (USA)
  name: Annual Technical Conference of the Society of Plastics Engineers (ANTEC)
date_created: 2023-11-07T13:50:30Z
date_updated: 2023-11-07T13:50:34Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
place: Denver, CO (USA)
status: public
title: Dielectric Heating in the Vulcanization Process of Rubber Extrudates
type: conference
user_id: '44116'
year: '2023'
...
---
_id: '48663'
author:
- first_name: Elmar
  full_name: Moritzer, Elmar
  id: '20531'
  last_name: Moritzer
- first_name: Christian
  full_name: Held, Christian
  id: '40647'
  last_name: Held
citation:
  ama: 'Moritzer E, Held C. Direktverschraubung additiv gefertigter Kunststoffbauteile.
    In: DVS Media GmbH, ed. ; 2023.'
  apa: Moritzer, E., &#38; Held, C. (2023). <i>Direktverschraubung additiv gefertigter
    Kunststoffbauteile</i> (DVS Media GmbH, Ed.).
  bibtex: '@inproceedings{Moritzer_Held_2023, place={Essen (Deutschland)}, title={Direktverschraubung
    additiv gefertigter Kunststoffbauteile}, author={Moritzer, Elmar and Held, Christian},
    editor={DVS Media GmbH}, year={2023} }'
  chicago: Moritzer, Elmar, and Christian Held. “Direktverschraubung additiv gefertigter
    Kunststoffbauteile.” edited by DVS Media GmbH. Essen (Deutschland), 2023.
  ieee: E. Moritzer and C. Held, “Direktverschraubung additiv gefertigter Kunststoffbauteile,”
    Essen (Deutschland), 2023.
  mla: Moritzer, Elmar, and Christian Held. <i>Direktverschraubung additiv gefertigter
    Kunststoffbauteile</i>. Edited by DVS Media GmbH, 2023.
  short: 'E. Moritzer, C. Held, in: DVS Media GmbH (Ed.), Essen (Deutschland), 2023.'
conference:
  location: Essen (Deutschland)
  name: DVS Congress 2023
corporate_editor:
- DVS Media GmbH
date_created: 2023-11-07T13:52:58Z
date_updated: 2023-11-07T13:59:40Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: ger
place: Essen (Deutschland)
status: public
title: Direktverschraubung additiv gefertigter Kunststoffbauteile
type: conference
user_id: '44116'
year: '2023'
...
---
_id: '48751'
author:
- first_name: Volker
  full_name: Schöppner, Volker
  id: '20530'
  last_name: Schöppner
- first_name: Karina
  full_name: Gevers, Karina
  id: '83151'
  last_name: Gevers
- first_name: N.
  full_name: Hoenen, N.
  last_name: Hoenen
- first_name: K.
  full_name: Uhlig, K.
  last_name: Uhlig
- first_name: P.
  full_name: Töws, P.
  last_name: Töws
- first_name: J.
  full_name: Decker, J.
  last_name: Decker
- first_name: M.
  full_name: Stommel, M.
  last_name: Stommel
citation:
  ama: Schöppner V, Gevers K, Hoenen N, et al. Simulation of Infrared Welded Short
    Fiber Reinforced Thermoplastic Parts based on Mori-Tanaka Homogenization Method.
    <i>Advanced Structured Materials</i>. Published online 2023.
  apa: Schöppner, V., Gevers, K., Hoenen, N., Uhlig, K., Töws, P., Decker, J., &#38;
    Stommel, M. (2023). Simulation of Infrared Welded Short Fiber Reinforced Thermoplastic
    Parts based on Mori-Tanaka Homogenization Method. <i>Advanced Structured Materials</i>.
  bibtex: '@article{Schöppner_Gevers_Hoenen_Uhlig_Töws_Decker_Stommel_2023, title={Simulation
    of Infrared Welded Short Fiber Reinforced Thermoplastic Parts based on Mori-Tanaka
    Homogenization Method}, journal={Advanced Structured Materials}, author={Schöppner,
    Volker and Gevers, Karina and Hoenen, N. and Uhlig, K. and Töws, P. and Decker,
    J. and Stommel, M.}, year={2023} }'
  chicago: Schöppner, Volker, Karina Gevers, N. Hoenen, K. Uhlig, P. Töws, J. Decker,
    and M. Stommel. “Simulation of Infrared Welded Short Fiber Reinforced Thermoplastic
    Parts Based on Mori-Tanaka Homogenization Method.” <i>Advanced Structured Materials</i>,
    2023.
  ieee: V. Schöppner <i>et al.</i>, “Simulation of Infrared Welded Short Fiber Reinforced
    Thermoplastic Parts based on Mori-Tanaka Homogenization Method,” <i>Advanced Structured
    Materials</i>, 2023.
  mla: Schöppner, Volker, et al. “Simulation of Infrared Welded Short Fiber Reinforced
    Thermoplastic Parts Based on Mori-Tanaka Homogenization Method.” <i>Advanced Structured
    Materials</i>, 2023.
  short: V. Schöppner, K. Gevers, N. Hoenen, K. Uhlig, P. Töws, J. Decker, M. Stommel,
    Advanced Structured Materials (2023).
date_created: 2023-11-09T13:29:35Z
date_updated: 2023-11-09T13:29:39Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
publication: Advanced Structured Materials
status: public
title: Simulation of Infrared Welded Short Fiber Reinforced Thermoplastic Parts based
  on Mori-Tanaka Homogenization Method
type: journal_article
user_id: '44116'
year: '2023'
...
---
_id: '48754'
author:
- first_name: Volker
  full_name: Schöppner, Volker
  id: '20530'
  last_name: Schöppner
- first_name: Laura
  full_name: Austermeier, Laura
  id: '45326'
  last_name: Austermeier
- first_name: Dorte
  full_name: Trienens, Dorte
  id: '44116'
  last_name: Trienens
citation:
  ama: Schöppner V, Austermeier L, Trienens D. Verbesserung der Betriebspunktauslegung
    durch Schneckensimulation. <i>Wissenschaftlicher Arbeitskreis Kunststofftechnik</i>.
    Published online 2023:62-66.
  apa: Schöppner, V., Austermeier, L., &#38; Trienens, D. (2023). Verbesserung der
    Betriebspunktauslegung durch Schneckensimulation. <i>Wissenschaftlicher Arbeitskreis
    Kunststofftechnik</i>, 62–66.
  bibtex: '@article{Schöppner_Austermeier_Trienens_2023, title={Verbesserung der Betriebspunktauslegung
    durch Schneckensimulation}, journal={Wissenschaftlicher Arbeitskreis Kunststofftechnik},
    author={Schöppner, Volker and Austermeier, Laura and Trienens, Dorte}, year={2023},
    pages={62–66} }'
  chicago: Schöppner, Volker, Laura Austermeier, and Dorte Trienens. “Verbesserung
    der Betriebspunktauslegung durch Schneckensimulation.” <i>Wissenschaftlicher Arbeitskreis
    Kunststofftechnik</i>, 2023, 62–66.
  ieee: V. Schöppner, L. Austermeier, and D. Trienens, “Verbesserung der Betriebspunktauslegung
    durch Schneckensimulation,” <i>Wissenschaftlicher Arbeitskreis Kunststofftechnik</i>,
    pp. 62–66, 2023.
  mla: Schöppner, Volker, et al. “Verbesserung der Betriebspunktauslegung durch Schneckensimulation.”
    <i>Wissenschaftlicher Arbeitskreis Kunststofftechnik</i>, 2023, pp. 62–66.
  short: V. Schöppner, L. Austermeier, D. Trienens, Wissenschaftlicher Arbeitskreis
    Kunststofftechnik (2023) 62–66.
date_created: 2023-11-09T13:34:09Z
date_updated: 2023-11-09T13:34:11Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: ger
page: 62-66
publication: Wissenschaftlicher Arbeitskreis Kunststofftechnik
publication_identifier:
  issn:
  - 1618-8357
status: public
title: Verbesserung der Betriebspunktauslegung durch Schneckensimulation
type: journal_article
user_id: '44116'
year: '2023'
...
---
_id: '48752'
author:
- first_name: Elmar
  full_name: Moritzer, Elmar
  id: '20531'
  last_name: Moritzer
- first_name: Maximilian
  full_name: Scholle, Maximilian
  id: '35736'
  last_name: Scholle
citation:
  ama: 'Moritzer E, Scholle M. The main factors influencing glass fiber shortening
    in the processing of bulk molding compounds (BMC). In: ; 2023.'
  apa: Moritzer, E., &#38; Scholle, M. (2023). <i>The main factors influencing glass
    fiber shortening in the processing of bulk molding compounds (BMC)</i>. 38th International
    Conference of the Polymer Processing Society (PPS), St. Gallen (Schweiz).
  bibtex: '@inproceedings{Moritzer_Scholle_2023, place={St. Gallen (Schweiz)}, title={The
    main factors influencing glass fiber shortening in the processing of bulk molding
    compounds (BMC)}, author={Moritzer, Elmar and Scholle, Maximilian}, year={2023}
    }'
  chicago: Moritzer, Elmar, and Maximilian Scholle. “The Main Factors Influencing
    Glass Fiber Shortening in the Processing of Bulk Molding Compounds (BMC).” St.
    Gallen (Schweiz), 2023.
  ieee: E. Moritzer and M. Scholle, “The main factors influencing glass fiber shortening
    in the processing of bulk molding compounds (BMC),” presented at the 38th International
    Conference of the Polymer Processing Society (PPS), St. Gallen (Schweiz), 2023.
  mla: Moritzer, Elmar, and Maximilian Scholle. <i>The Main Factors Influencing Glass
    Fiber Shortening in the Processing of Bulk Molding Compounds (BMC)</i>. 2023.
  short: 'E. Moritzer, M. Scholle, in: St. Gallen (Schweiz), 2023.'
conference:
  location: St. Gallen (Schweiz)
  name: 38th International Conference of the Polymer Processing Society (PPS)
date_created: 2023-11-09T13:30:54Z
date_updated: 2023-11-09T13:30:56Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
place: St. Gallen (Schweiz)
status: public
title: The main factors influencing glass fiber shortening in the processing of bulk
  molding compounds (BMC)
type: conference
user_id: '44116'
year: '2023'
...
---
_id: '48748'
author:
- first_name: Jonas
  full_name: Köllermeier, Jonas
  id: '58933'
  last_name: Köllermeier
- first_name: Volker
  full_name: Schöppner, Volker
  id: '20530'
  last_name: Schöppner
citation:
  ama: 'Köllermeier J, Schöppner V. Optimizing the Processing Performance of a Single
    Screw Extruder Using Live Simulations Based on Real Time Experimental Data. In:
    ; 2023.'
  apa: Köllermeier, J., &#38; Schöppner, V. (2023). <i>Optimizing the Processing Performance
    of a Single Screw Extruder Using Live Simulations Based on Real Time Experimental
    Data</i>. 60th Ilmenau Scientific Colloquium, Ilmenau (Deutschland).
  bibtex: '@inproceedings{Köllermeier_Schöppner_2023, place={Ilmenau (Deutschland)},
    title={Optimizing the Processing Performance of a Single Screw Extruder Using
    Live Simulations Based on Real Time Experimental Data}, author={Köllermeier, Jonas
    and Schöppner, Volker}, year={2023} }'
  chicago: Köllermeier, Jonas, and Volker Schöppner. “Optimizing the Processing Performance
    of a Single Screw Extruder Using Live Simulations Based on Real Time Experimental
    Data.” Ilmenau (Deutschland), 2023.
  ieee: J. Köllermeier and V. Schöppner, “Optimizing the Processing Performance of
    a Single Screw Extruder Using Live Simulations Based on Real Time Experimental
    Data,” presented at the 60th Ilmenau Scientific Colloquium, Ilmenau (Deutschland),
    2023.
  mla: Köllermeier, Jonas, and Volker Schöppner. <i>Optimizing the Processing Performance
    of a Single Screw Extruder Using Live Simulations Based on Real Time Experimental
    Data</i>. 2023.
  short: 'J. Köllermeier, V. Schöppner, in: Ilmenau (Deutschland), 2023.'
conference:
  location: Ilmenau (Deutschland)
  name: 60th Ilmenau Scientific Colloquium
date_created: 2023-11-09T13:20:57Z
date_updated: 2023-11-09T13:23:31Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
place: Ilmenau (Deutschland)
status: public
title: Optimizing the Processing Performance of a Single Screw Extruder Using Live
  Simulations Based on Real Time Experimental Data
type: conference
user_id: '44116'
year: '2023'
...
---
_id: '48749'
author:
- first_name: Sascha
  full_name: Vogtschmidt, Sascha
  id: '32492'
  last_name: Vogtschmidt
- first_name: Volker
  full_name: Schöppner, Volker
  id: '20530'
  last_name: Schöppner
citation:
  ama: Vogtschmidt S, Schöppner V. Schweißnahtkennwerte für die lebensdaueroptimierte
    Bauteilauslegung von hochtemperaturbeständigen Thermoplasten. <i>Joining Plastics</i>.
    Published online 2023.
  apa: Vogtschmidt, S., &#38; Schöppner, V. (2023). Schweißnahtkennwerte für die lebensdaueroptimierte
    Bauteilauslegung von hochtemperaturbeständigen Thermoplasten. <i>Joining Plastics</i>.
  bibtex: '@article{Vogtschmidt_Schöppner_2023, title={Schweißnahtkennwerte für die
    lebensdaueroptimierte Bauteilauslegung von hochtemperaturbeständigen Thermoplasten},
    journal={Joining Plastics}, author={Vogtschmidt, Sascha and Schöppner, Volker},
    year={2023} }'
  chicago: Vogtschmidt, Sascha, and Volker Schöppner. “Schweißnahtkennwerte für die
    lebensdaueroptimierte Bauteilauslegung von hochtemperaturbeständigen Thermoplasten.”
    <i>Joining Plastics</i>, 2023.
  ieee: S. Vogtschmidt and V. Schöppner, “Schweißnahtkennwerte für die lebensdaueroptimierte
    Bauteilauslegung von hochtemperaturbeständigen Thermoplasten,” <i>Joining Plastics</i>,
    2023.
  mla: Vogtschmidt, Sascha, and Volker Schöppner. “Schweißnahtkennwerte für die lebensdaueroptimierte
    Bauteilauslegung von hochtemperaturbeständigen Thermoplasten.” <i>Joining Plastics</i>,
    2023.
  short: S. Vogtschmidt, V. Schöppner, Joining Plastics (2023).
date_created: 2023-11-09T13:23:18Z
date_updated: 2023-11-09T13:23:21Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: ger
publication: Joining Plastics
status: public
title: Schweißnahtkennwerte für die lebensdaueroptimierte Bauteilauslegung von hochtemperaturbeständigen
  Thermoplasten
type: journal_article
user_id: '44116'
year: '2023'
...
---
_id: '48753'
author:
- first_name: Volker
  full_name: Schöppner, Volker
  id: '20530'
  last_name: Schöppner
- first_name: Maximilian
  full_name: Frank, Maximilian
  id: '38255'
  last_name: Frank
- first_name: Christoph Wilhelm Theodor
  full_name: Schall, Christoph Wilhelm Theodor
  id: '44224'
  last_name: Schall
citation:
  ama: Schöppner V, Frank M, Schall CWT. The Wave Must Be Right. <i>Plastic Insights</i>.
    2023;(7/2023):52-54.
  apa: Schöppner, V., Frank, M., &#38; Schall, C. W. T. (2023). The Wave Must Be Right.
    <i>Plastic Insights</i>, <i>7/2023</i>, 52–54.
  bibtex: '@article{Schöppner_Frank_Schall_2023, title={The Wave Must Be Right}, number={7/2023},
    journal={Plastic Insights}, author={Schöppner, Volker and Frank, Maximilian and
    Schall, Christoph Wilhelm Theodor}, year={2023}, pages={52–54} }'
  chicago: 'Schöppner, Volker, Maximilian Frank, and Christoph Wilhelm Theodor Schall.
    “The Wave Must Be Right.” <i>Plastic Insights</i>, no. 7/2023 (2023): 52–54.'
  ieee: V. Schöppner, M. Frank, and C. W. T. Schall, “The Wave Must Be Right,” <i>Plastic
    Insights</i>, no. 7/2023, pp. 52–54, 2023.
  mla: Schöppner, Volker, et al. “The Wave Must Be Right.” <i>Plastic Insights</i>,
    no. 7/2023, 2023, pp. 52–54.
  short: V. Schöppner, M. Frank, C.W.T. Schall, Plastic Insights (2023) 52–54.
date_created: 2023-11-09T13:32:22Z
date_updated: 2023-11-09T13:32:29Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
issue: 7/2023
language:
- iso: eng
page: 52-54
publication: Plastic Insights
publication_identifier:
  issn:
  - 2941-4202
status: public
title: The Wave Must Be Right
type: journal_article
user_id: '44116'
year: '2023'
...
---
_id: '48755'
author:
- first_name: Elmar
  full_name: Moritzer, Elmar
  id: '20531'
  last_name: Moritzer
- first_name: Christian
  full_name: Held, Christian
  id: '40647'
  last_name: Held
citation:
  ama: 'Moritzer E, Held C. Vorspannkraftrelaxation bei der Direktverschraubung additiv
    gefertigter Kunststoffbauteile. In: ; 2023.'
  apa: Moritzer, E., &#38; Held, C. (2023). <i>Vorspannkraftrelaxation bei der Direktverschraubung
    additiv gefertigter Kunststoffbauteile</i>. 28. Technomer, Chemnitz (Deutschland).
  bibtex: '@inproceedings{Moritzer_Held_2023, place={Chemnitz (Deutschland)}, title={Vorspannkraftrelaxation
    bei der Direktverschraubung additiv gefertigter Kunststoffbauteile}, author={Moritzer,
    Elmar and Held, Christian}, year={2023} }'
  chicago: Moritzer, Elmar, and Christian Held. “Vorspannkraftrelaxation bei der Direktverschraubung
    additiv gefertigter Kunststoffbauteile.” Chemnitz (Deutschland), 2023.
  ieee: E. Moritzer and C. Held, “Vorspannkraftrelaxation bei der Direktverschraubung
    additiv gefertigter Kunststoffbauteile,” presented at the 28. Technomer, Chemnitz
    (Deutschland), 2023.
  mla: Moritzer, Elmar, and Christian Held. <i>Vorspannkraftrelaxation bei der Direktverschraubung
    additiv gefertigter Kunststoffbauteile</i>. 2023.
  short: 'E. Moritzer, C. Held, in: Chemnitz (Deutschland), 2023.'
conference:
  location: Chemnitz (Deutschland)
  name: 28. Technomer
date_created: 2023-11-09T13:35:17Z
date_updated: 2023-11-09T13:35:20Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: ger
place: Chemnitz (Deutschland)
status: public
title: Vorspannkraftrelaxation bei der Direktverschraubung additiv gefertigter Kunststoffbauteile
type: conference
user_id: '44116'
year: '2023'
...
---
_id: '48781'
abstract:
- lang: eng
  text: In a punch-bending machine, wire products are manufactured for a wide range
    of industrial sectors, such as the electronics industry. The raw material for
    this process is flat wire made of high-strength steel. During the manufacturing
    process of the flat wire, residual stresses and plastic deformations are induced
    into the wire. These residual stresses and deformations fluctuate over the length
    of the semi-finished product and have a negative effect on the final product quality.
    Straightening machines are used to reduce this influence to a minimum. So far,
    the adjustment of a straightening machine has been performed manually, which is
    a lengthy and complex task even for an experienced worker. This inevitably leads
    to the use of inefficient straightening strategies and causes high rejection rates
    in the entire production process. Due to a lack of sensor information from the
    straightening operation, application of modern feedback control methods has not
    been practicable. This paper presents a novel design for a straightening machine
    with an integrated, precise straightening force measurement. By simultaneously
    monitoring the position of the straightening rollers, state variables of the straightening
    operation can be derived. Additionally, a tension control for feeding the flat
    wire is introduced. This is implemented to mitigate the disturbing effects caused
    by irregularities in the wire-feeding process. In the results of this article,
    the high precision of the developed force measurement design and its possible
    applications are shown.
author:
- first_name: Lukas
  full_name: Bathelt, Lukas
  last_name: Bathelt
- first_name: Maximilian
  full_name: Scurk, Maximilian
  last_name: Scurk
- first_name: Eugen
  full_name: Djakow, Eugen
  id: '7904'
  last_name: Djakow
- first_name: Christian
  full_name: Henke, Christian
  last_name: Henke
- first_name: Ansgar
  full_name: Trächtler, Ansgar
  id: '552'
  last_name: Trächtler
citation:
  ama: Bathelt L, Scurk M, Djakow E, Henke C, Trächtler A. Novel Straightening-Machine
    Design with Integrated Force Measurement for Straightening of High-Strength Flat
    Wire. <i>Sensors</i>. 2023;23(22). doi:<a href="https://doi.org/10.3390/s23229091">10.3390/s23229091</a>
  apa: Bathelt, L., Scurk, M., Djakow, E., Henke, C., &#38; Trächtler, A. (2023).
    Novel Straightening-Machine Design with Integrated Force Measurement for Straightening
    of High-Strength Flat Wire. <i>Sensors</i>, <i>23</i>(22). <a href="https://doi.org/10.3390/s23229091">https://doi.org/10.3390/s23229091</a>
  bibtex: '@article{Bathelt_Scurk_Djakow_Henke_Trächtler_2023, title={Novel Straightening-Machine
    Design with Integrated Force Measurement for Straightening of High-Strength Flat
    Wire}, volume={23}, DOI={<a href="https://doi.org/10.3390/s23229091">10.3390/s23229091</a>},
    number={22}, journal={Sensors}, author={Bathelt, Lukas and Scurk, Maximilian and
    Djakow, Eugen and Henke, Christian and Trächtler, Ansgar}, year={2023} }'
  chicago: Bathelt, Lukas, Maximilian Scurk, Eugen Djakow, Christian Henke, and Ansgar
    Trächtler. “Novel Straightening-Machine Design with Integrated Force Measurement
    for Straightening of High-Strength Flat Wire.” <i>Sensors</i> 23, no. 22 (2023).
    <a href="https://doi.org/10.3390/s23229091">https://doi.org/10.3390/s23229091</a>.
  ieee: 'L. Bathelt, M. Scurk, E. Djakow, C. Henke, and A. Trächtler, “Novel Straightening-Machine
    Design with Integrated Force Measurement for Straightening of High-Strength Flat
    Wire,” <i>Sensors</i>, vol. 23, no. 22, 2023, doi: <a href="https://doi.org/10.3390/s23229091">10.3390/s23229091</a>.'
  mla: Bathelt, Lukas, et al. “Novel Straightening-Machine Design with Integrated
    Force Measurement for Straightening of High-Strength Flat Wire.” <i>Sensors</i>,
    vol. 23, no. 22, 2023, doi:<a href="https://doi.org/10.3390/s23229091">10.3390/s23229091</a>.
  short: L. Bathelt, M. Scurk, E. Djakow, C. Henke, A. Trächtler, Sensors 23 (2023).
date_created: 2023-11-10T14:25:34Z
date_updated: 2023-11-10T14:28:15Z
department:
- _id: '241'
- _id: '153'
doi: 10.3390/s23229091
intvolume: '        23'
issue: '22'
language:
- iso: eng
main_file_link:
- open_access: '1'
  url: https://www.mdpi.com/1424-8220/23/22/9091
oa: '1'
publication: Sensors
publication_identifier:
  issn:
  - 1424-8220
quality_controlled: '1'
status: public
title: Novel Straightening-Machine Design with Integrated Force Measurement for Straightening
  of High-Strength Flat Wire
type: journal_article
user_id: '41470'
volume: 23
year: '2023'
...
---
_id: '48804'
abstract:
- lang: ger
  text: 'Selbstverständlichkeiten in Verständlichkeiten überführen – dies ist das
    Credo der Phänomenologie Husserls. Ein zentrales Anliegen des phänomenologischen
    Programms ist es, die „vermeintlichen Selbstverständlichkeiten“ des Positivismus
    aufzudecken und zu klären; zugleich gibt Selbstverständlichkeit Anlass zu inhaltlichen
    Analysen, denn sie fungiert als Geltungsmodus des alltäglichen Lebensvollzugs,
    gespiegelt im Sinnbild von Boden und Horizont der Lebenswelt. Die Studie stellt
    Geltung, Einstellung und Perspektivwechsel als jene begrifflichen Werkzeuge heraus,
    mit denen Husserl dieses schwer greifbare Phänomen systematisch erschließt und
    methodisch wie inhaltlich in die Spannungsfelder von Theorie und Praxis, Doxa
    und Episteme, Lebenswelt und Wissenschaft einbettet. Darüber hinaus ergänzt sie
    mit dem psychopathologischen Ansatz Wolfgang Blankenburgs, was die Beschreibungsmacht
    der Phänomenologie an ihre Grenzen bringt: die Erfahrung der Selbstverständlichkeit
    im Lebensvollzug. '
author:
- first_name: Martina
  full_name: Philippi, Martina
  id: '100856'
  last_name: Philippi
citation:
  ama: Philippi M. <i>Selbstverständlichkeit und Problematisierung. Husserls Programm
    der Phänomenologie</i>. Vol 40. Brill, Fink; 2023.
  apa: Philippi, M. (2023). <i>Selbstverständlichkeit und Problematisierung. Husserls
    Programm der Phänomenologie</i> (Vol. 40). Brill, Fink.
  bibtex: '@book{Philippi_2023, place={Paderborn}, series={Phänomenologische Untersuchungen},
    title={Selbstverständlichkeit und Problematisierung. Husserls Programm der Phänomenologie},
    volume={40}, publisher={Brill, Fink}, author={Philippi, Martina}, year={2023},
    collection={Phänomenologische Untersuchungen} }'
  chicago: 'Philippi, Martina. <i>Selbstverständlichkeit und Problematisierung. Husserls
    Programm der Phänomenologie</i>. Vol. 40. Phänomenologische Untersuchungen. Paderborn:
    Brill, Fink, 2023.'
  ieee: 'M. Philippi, <i>Selbstverständlichkeit und Problematisierung. Husserls Programm
    der Phänomenologie</i>, vol. 40. Paderborn: Brill, Fink, 2023.'
  mla: Philippi, Martina. <i>Selbstverständlichkeit und Problematisierung. Husserls
    Programm der Phänomenologie</i>. Brill, Fink, 2023.
  short: M. Philippi, Selbstverständlichkeit und Problematisierung. Husserls Programm
    der Phänomenologie, Brill, Fink, Paderborn, 2023.
date_created: 2023-11-13T16:22:55Z
date_updated: 2023-11-13T16:23:10Z
extern: '1'
intvolume: '        40'
keyword:
- Selbstverständlichkeit
- Husserl
- Phänomenologie
language:
- iso: ger
page: 220+XVI
place: Paderborn
publication_identifier:
  isbn:
  - 978-3-8467-6726-9
publication_status: published
publisher: Brill, Fink
series_title: Phänomenologische Untersuchungen
status: public
title: Selbstverständlichkeit und Problematisierung. Husserls Programm der Phänomenologie
type: book
user_id: '100856'
volume: 40
year: '2023'
...
---
_id: '48095'
abstract:
- lang: eng
  text: Fused deposition modeling (FDM) is an additive manufacturing process that
    can be used to manufacture three-dimensional thermoplastic components layer by
    layer. One disadvantage of FDM is the shrinkage of the components during the manufacturing
    process. The filament is molten in the nozzle, deposited layer by layer, and cools
    down again. During solidification, the filament shrinks inhomogeneously in the
    x/y/z direction, which leads to distortion of the component geometries. Particularly
    with higher nominal lengths and complex local geometries, there is a need for
    optimization with regard to dimensional accuracy. The aim of this paper is to
    counteract this on the software side with global as well as local shrinkage factors.
    The expected shrinkage within a layer is predicted with an in-house developed
    software. The geometric accuracy of the model is verified by experimental investigations
    on cylindrical test specimens. In these, the so-called clover effect occurs as
    a result of the shrinkage. The circular shape of the deposited layer is deformed
    by the distortion in the x–y plane comparable to a clover. Finally, the results
    are validated by analyzing a demonstrator in the form of a bracket.
author:
- first_name: Thorsten
  full_name: Koers, Thorsten
  id: '38077'
  last_name: Koers
- first_name: Balázs
  full_name: Magyar, Balázs
  id: '97759'
  last_name: Magyar
citation:
  ama: 'Koers T, Magyar B. Compensation of the Shrinkage Behavior Occurring in Cylindrical
    Components in the FDM Process. In: Lamanna G, Opran C, eds. <i>Macromolecular
    Symposia</i>. Vol 411. Wiley; 2023. doi:<a href="https://doi.org/10.1002/masy.202200185">https://doi.org/10.1002/masy.202200185</a>'
  apa: Koers, T., &#38; Magyar, B. (2023). Compensation of the Shrinkage Behavior
    Occurring in Cylindrical Components in the FDM Process. In G. Lamanna &#38; C.
    Opran (Eds.), <i>Macromolecular Symposia</i> (Vol. 411, Issue 1). Wiley. <a href="https://doi.org/10.1002/masy.202200185">https://doi.org/10.1002/masy.202200185</a>
  bibtex: '@inproceedings{Koers_Magyar_2023, title={Compensation of the Shrinkage
    Behavior Occurring in Cylindrical Components in the FDM Process}, volume={411},
    DOI={<a href="https://doi.org/10.1002/masy.202200185">https://doi.org/10.1002/masy.202200185</a>},
    number={1}, booktitle={Macromolecular Symposia}, publisher={Wiley}, author={Koers,
    Thorsten and Magyar, Balázs}, editor={Lamanna, Giuseppe and Opran, Constantin},
    year={2023} }'
  chicago: Koers, Thorsten, and Balázs Magyar. “Compensation of the Shrinkage Behavior
    Occurring in Cylindrical Components in the FDM Process.” In <i>Macromolecular
    Symposia</i>, edited by Giuseppe Lamanna and Constantin Opran, Vol. 411. Wiley,
    2023. <a href="https://doi.org/10.1002/masy.202200185">https://doi.org/10.1002/masy.202200185</a>.
  ieee: 'T. Koers and B. Magyar, “Compensation of the Shrinkage Behavior Occurring
    in Cylindrical Components in the FDM Process,” in <i>Macromolecular Symposia</i>,
    Bucharest, Romania, 2023, vol. 411, no. 1, doi: <a href="https://doi.org/10.1002/masy.202200185">https://doi.org/10.1002/masy.202200185</a>.'
  mla: Koers, Thorsten, and Balázs Magyar. “Compensation of the Shrinkage Behavior
    Occurring in Cylindrical Components in the FDM Process.” <i>Macromolecular Symposia</i>,
    edited by Giuseppe Lamanna and Constantin Opran, vol. 411, no. 1, Wiley, 2023,
    doi:<a href="https://doi.org/10.1002/masy.202200185">https://doi.org/10.1002/masy.202200185</a>.
  short: 'T. Koers, B. Magyar, in: G. Lamanna, C. Opran (Eds.), Macromolecular Symposia,
    Wiley, 2023.'
conference:
  end_date: 2022-11-26
  location: Bucharest, Romania
  name: Conference on Design and Technologies for Polymeric and Composites Products
    ‐ POLCOM 2022
  start_date: 2022-11-23
date_created: 2023-10-16T12:48:42Z
date_updated: 2023-11-17T11:36:15Z
department:
- _id: '146'
- _id: '219'
- _id: '9'
doi: https://doi.org/10.1002/masy.202200185
editor:
- first_name: Giuseppe
  full_name: Lamanna, Giuseppe
  last_name: Lamanna
- first_name: Constantin
  full_name: Opran, Constantin
  last_name: Opran
intvolume: '       411'
issue: '1'
language:
- iso: eng
publication: Macromolecular Symposia
publisher: Wiley
quality_controlled: '1'
status: public
title: Compensation of the Shrinkage Behavior Occurring in Cylindrical Components
  in the FDM Process
type: conference
user_id: '38077'
volume: 411
year: '2023'
...
---
_id: '49155'
abstract:
- lang: ger
  text: Hybride Bauteile, welche aus Werkstoffen mit hohen spezifischen Festigkeiten
    bestehen, können zu einem signifikanten Leichtbau im Automobil beitragen. Diese
    Arbeit erforscht die hybride Kombination von pressgehärtetem Stahl und kohlenstofffaserverstärktem
    Kunststoff. Ausgehend von einer Analyse bestehender Karosseriestrukturen erfolgt
    ein Konzept für eine hybride B-Säule. Das Potential zur Gewichtsreduzierung durch
    das hybride Bauteilkonzept wurde dabei zu 57 % identifiziert, welches jedoch nur
    bei Sicherstellung einer intakten Grenzfläche erreicht wird. Zur Erlangung der
    Grenzflächenfestigkeit bei charakteristischen Belastungsprofilen wurde ein Verfahren
    zur Einbringung makroskopischer Formschlusselemente im Presshärteprozess entwickelt.
    Durch diese Formschlusselemente wird eine Steigerung der Scherfestigkeit der hybriden
    Komponenten von über 300 % erreicht. Die gewonnenen Erkenntnisse werden abschließend
    zur Auslegung einer hybriden B-Säule angewendet.
- lang: eng
  text: Hybrid components consisting of materials with high specific strengths can
    contribute to significant automotive lightweight design. This thesis investigates
    the hybrid combination of press-hardened steel and carbon fiber-reinforced plastics.
    Based on a potential analysis of existing body-in-white structures, a concept
    for a hybrid B-pillar is developed. The potential for weight reduction through
    the hybrid component concept was identified to be 57 %, which is only achieved
    if an intact interface is ensured. To achieve interface strength under characteristic
    load profiles, a method was developed for creating macroscopic form closures in
    the press hardening process. These form closures achieve an increase in the shear
    strength of the hybrid components of over 300 %. Finally, the knowledge gained
    is applied to the design of a hybrid B-pillar.
author:
- first_name: Marcel
  full_name: Triebus, Marcel
  id: '66036'
  last_name: Triebus
citation:
  ama: Triebus M. <i>Belastungsgerechte Auslegung Automobiler Leichtbaustrukturen
    Aus Pressgehärtetem Stahl Und Kohlenstofffaserverstärktem Kunststoff</i>.; 2023.
    doi:<a href="https://doi.org/10.17619/UNIPB/1-1719">10.17619/UNIPB/1-1719</a>
  apa: Triebus, M. (2023). <i>Belastungsgerechte Auslegung automobiler Leichtbaustrukturen
    aus pressgehärtetem Stahl und kohlenstofffaserverstärktem Kunststoff</i>. <a href="https://doi.org/10.17619/UNIPB/1-1719">https://doi.org/10.17619/UNIPB/1-1719</a>
  bibtex: '@book{Triebus_2023, title={Belastungsgerechte Auslegung automobiler Leichtbaustrukturen
    aus pressgehärtetem Stahl und kohlenstofffaserverstärktem Kunststoff}, DOI={<a
    href="https://doi.org/10.17619/UNIPB/1-1719">10.17619/UNIPB/1-1719</a>}, author={Triebus,
    Marcel}, year={2023} }'
  chicago: Triebus, Marcel. <i>Belastungsgerechte Auslegung Automobiler Leichtbaustrukturen
    Aus Pressgehärtetem Stahl Und Kohlenstofffaserverstärktem Kunststoff</i>, 2023.
    <a href="https://doi.org/10.17619/UNIPB/1-1719">https://doi.org/10.17619/UNIPB/1-1719</a>.
  ieee: M. Triebus, <i>Belastungsgerechte Auslegung automobiler Leichtbaustrukturen
    aus pressgehärtetem Stahl und kohlenstofffaserverstärktem Kunststoff</i>. 2023.
  mla: Triebus, Marcel. <i>Belastungsgerechte Auslegung Automobiler Leichtbaustrukturen
    Aus Pressgehärtetem Stahl Und Kohlenstofffaserverstärktem Kunststoff</i>. 2023,
    doi:<a href="https://doi.org/10.17619/UNIPB/1-1719">10.17619/UNIPB/1-1719</a>.
  short: M. Triebus, Belastungsgerechte Auslegung Automobiler Leichtbaustrukturen
    Aus Pressgehärtetem Stahl Und Kohlenstofffaserverstärktem Kunststoff, 2023.
date_created: 2023-11-23T11:35:44Z
date_updated: 2023-11-23T11:50:35Z
department:
- _id: '321'
- _id: '9'
- _id: '149'
doi: 10.17619/UNIPB/1-1719
language:
- iso: eng
status: public
title: Belastungsgerechte Auslegung automobiler Leichtbaustrukturen aus pressgehärtetem
  Stahl und kohlenstofffaserverstärktem Kunststoff
type: dissertation
user_id: '66036'
year: '2023'
...
---
_id: '49299'
author:
- first_name: Henrike
  full_name: Herdramm, Henrike
  id: '102488'
  last_name: Herdramm
citation:
  ama: Herdramm H. <i>Die Fremdheit der Tiere. Zur theologischen Konstruktion und
    Dekonstruktion des Anderen</i>. Vol 3. wbg academic; 2023.
  apa: Herdramm, H. (2023). <i>Die Fremdheit der Tiere. Zur theologischen Konstruktion
    und Dekonstruktion des Anderen</i> (Vol. 3). wbg academic.
  bibtex: '@book{Herdramm_2023, place={Darmstadt}, series={Animate Theologies}, title={Die
    Fremdheit der Tiere. Zur theologischen Konstruktion und Dekonstruktion des Anderen},
    volume={3}, publisher={wbg academic}, author={Herdramm, Henrike}, year={2023},
    collection={Animate Theologies} }'
  chicago: 'Herdramm, Henrike. <i>Die Fremdheit der Tiere. Zur theologischen Konstruktion
    und Dekonstruktion des Anderen</i>. Vol. 3. Animate Theologies. Darmstadt: wbg
    academic, 2023.'
  ieee: 'H. Herdramm, <i>Die Fremdheit der Tiere. Zur theologischen Konstruktion und
    Dekonstruktion des Anderen</i>, vol. 3. Darmstadt: wbg academic, 2023.'
  mla: Herdramm, Henrike. <i>Die Fremdheit der Tiere. Zur theologischen Konstruktion
    und Dekonstruktion des Anderen</i>. wbg academic, 2023.
  short: H. Herdramm, Die Fremdheit der Tiere. Zur theologischen Konstruktion und
    Dekonstruktion des Anderen, wbg academic, Darmstadt, 2023.
date_created: 2023-11-28T12:48:33Z
date_updated: 2023-11-28T13:09:06Z
extern: '1'
intvolume: '         3'
language:
- iso: ger
main_file_link:
- open_access: '1'
  url: https://www.wbg-wissenverbindet.de/shop/43845/die-fremdheit-der-tiere
oa: '1'
page: '86'
place: Darmstadt
publication_identifier:
  isbn:
  - ' 978-3-534-30012-9'
publication_status: published
publisher: wbg academic
related_material:
  link:
  - relation: contains
    url: https://www.wbg-wissenverbindet.de/shop/43845/die-fremdheit-der-tiere
series_title: Animate Theologies
status: public
title: Die Fremdheit der Tiere. Zur theologischen Konstruktion und Dekonstruktion
  des Anderen
type: book
user_id: '102488'
volume: 3
year: '2023'
...
---
_id: '48072'
abstract:
- lang: eng
  text: Die weltweit erzeugten Emissionen müssen in allen emittierenden Sektoren signifikant
    gesenkt werden, um die Auswirkungen des Klimawandels zu reduzieren. Dies ist unter
    anderem durch die energieeffiziente Wiederverwertung vorhandener Ressourcen und
    damit der Einstellung einer nachhaltigen Kreislaufwirtschaft möglich. Aufgrund
    der hohen erforderlichen Energiemenge in der primären Herstellung von Aluminium
    existieren hier im Vergleich zu anderen Konstruktionswerkstoffen große Einsparpotentiale.
    Mit dem in dieser Arbeit erforschten reibungsinduzierten Recyclingverfahren (RIR)
    wird eine alternative und energieeffiziente Prozessroute zum direkten Recycling
    von unterschiedlichen Aluminiumschrotten geschaffen. Zur Charakterisierung der
    Prozessroute werden u. a. die Erkenntnisse aus sich gegenseitig unterstützenden
    experimentellen und theoretischen Untersuchungen zu den Vorgängen der der Verdichtung,
    Plastifizierung als auch Extrusion der recycelten Profile dargelegt. Die Einflüsse
    unterschiedlicher Eingangsgrößen wie z. B. der Werkzeuggestaltung oder der Verarbeitung
    unterschiedlicher Legierungen werden zudem zur zukünftigen Auslegung des Prozesses
    erläutert. Aus der abschließenden energetischen Bilanzierung kann geschlossen
    werden, dass aufgrund der geringeren Verarbeitungstemperatur signifikante Energieersparnisse
    bei Verwendung des RIR im Vergleich zu den konventionellen Produktionsstrategien
    erzielt werden können.
author:
- first_name: Thomas
  full_name: Borgert, Thomas
  id: '83141'
  last_name: Borgert
citation:
  ama: Borgert T. <i>Reibungsinduzierter Prozess zum nutzerindividuellen und energieeffizienten
    Recycling von Aluminiumschrotten</i>.; 2023.
  apa: Borgert, T. (2023). <i>Reibungsinduzierter Prozess zum nutzerindividuellen
    und energieeffizienten Recycling von Aluminiumschrotten</i>.
  bibtex: '@book{Borgert_2023, title={Reibungsinduzierter Prozess zum nutzerindividuellen
    und energieeffizienten Recycling von Aluminiumschrotten}, author={Borgert, Thomas},
    year={2023} }'
  chicago: Borgert, Thomas. <i>Reibungsinduzierter Prozess zum nutzerindividuellen
    und energieeffizienten Recycling von Aluminiumschrotten</i>, 2023.
  ieee: T. Borgert, <i>Reibungsinduzierter Prozess zum nutzerindividuellen und energieeffizienten
    Recycling von Aluminiumschrotten</i>. 2023.
  mla: Borgert, Thomas. <i>Reibungsinduzierter Prozess zum nutzerindividuellen und
    energieeffizienten Recycling von Aluminiumschrotten</i>. 2023.
  short: T. Borgert, Reibungsinduzierter Prozess zum nutzerindividuellen und energieeffizienten
    Recycling von Aluminiumschrotten, 2023.
date_created: 2023-10-16T07:13:03Z
date_updated: 2023-10-16T07:13:41Z
department:
- _id: '156'
language:
- iso: ger
main_file_link:
- url: https://www.shaker.de/de/content/catalogue/index.asp?lang=de&ID=8&ISBN=978-3-8440-9240-0&search=yes
page: '200'
publication_identifier:
  isbn:
  - 978-3-8440-9240-0
publication_status: published
status: public
supervisor:
- first_name: Werner
  full_name: Homberg, Werner
  id: '233'
  last_name: Homberg
title: Reibungsinduzierter Prozess zum nutzerindividuellen und energieeffizienten
  Recycling von Aluminiumschrotten
type: dissertation
user_id: '83141'
year: '2023'
...
---
_id: '48374'
abstract:
- lang: eng
  text: "<jats:title>Abstract</jats:title><jats:sec>\r\n              <jats:title>Purpose</jats:title>\r\n
    \             <jats:p>Protein-rich foods show heterogeneous associations with
    the risk of type 2 diabetes (T2D) and it remains unclear whether habitual protein
    intake is related to T2D risk. We carried out an umbrella review of systematic
    reviews (SR) of randomised trials and/or cohort studies on protein intake in relation
    to risks of T2D.</jats:p>\r\n            </jats:sec><jats:sec>\r\n              <jats:title>Methods</jats:title>\r\n
    \             <jats:p>Following a pre-specified protocol (PROSPERO: CRD42018082395),
    we retrieved SRs on protein intake and T2D risk published between July 1st 2009
    and May 22nd 2022, and assessed the methodological quality and outcome-specific
    certainty of the evidence using a modified version of AMSTAR 2 and NutriGrade,
    respectively. The overall certainty of evidence was rated according to predefined
    criteria.</jats:p>\r\n            </jats:sec><jats:sec>\r\n              <jats:title>Results</jats:title>\r\n
    \             <jats:p>Eight SRs were identified of which six contained meta-analyses.
    The majority of SRs on total protein intake had moderate or high methodological
    quality and moderate outcome-specific certainty of evidence according to NutriGrade,
    however, the latter was low for the majority of SRs on animal and plant protein.
    Six of the eight SRs reported risk increases with both total and animal protein.
    According to one SR, total protein intake in studies was ~ 21 energy percentage
    (%E) in the highest intake category and 15%E in the lowest intake category. Relative
    Risks comparing high versus low intake in most recent SRs ranged from 1.09 (two
    SRs, 95% CIs 1.02–1.15 and 1.06–1.13) to 1.11 (1.05–1.16) for total protein (between
    8 and 12 cohort studies included) and from 1.13 (1.08–1.19) to 1.19 (two SRs,
    1.11–1.28 and 1.11–1.28) (8–9 cohort studies) for animal protein. However, SRs
    on RCTs examining major glycaemic traits (HbA<jats:sub>1c</jats:sub>, fasting
    glucose, fasting insulin) do not support a clear biological link with T2D risk.
    For plant protein, some recent SRs pointed towards risk decreases and non-linear
    associations, however, the majority did not support an association with T2D risk.</jats:p>\r\n
    \           </jats:sec><jats:sec>\r\n              <jats:title>Conclusion</jats:title>\r\n
    \             <jats:p>Higher total protein intake was possibly associated with
    higher T2D risk, while there is insufficient evidence for a risk increase with
    higher intakes of animal protein and a risk decrease with plant protein intake.
    Given that most SRs on plant protein did not indicate an association, there is
    possibly a lack of an effect.</jats:p>\r\n            </jats:sec>"
author:
- first_name: Matthias B.
  full_name: Schulze, Matthias B.
  last_name: Schulze
- first_name: Julia
  full_name: Haardt, Julia
  last_name: Haardt
- first_name: Anna M.
  full_name: Amini, Anna M.
  last_name: Amini
- first_name: Nicole
  full_name: Kalotai, Nicole
  last_name: Kalotai
- first_name: Andreas
  full_name: Lehmann, Andreas
  last_name: Lehmann
- first_name: Annemarie
  full_name: Schmidt, Annemarie
  last_name: Schmidt
- first_name: Anette
  full_name: Buyken, Anette
  id: '65985'
  last_name: Buyken
- first_name: Sarah
  full_name: Egert, Sarah
  last_name: Egert
- first_name: Sabine
  full_name: Ellinger, Sabine
  last_name: Ellinger
- first_name: Anja
  full_name: Kroke, Anja
  last_name: Kroke
- first_name: Tilman
  full_name: Kühn, Tilman
  last_name: Kühn
- first_name: Sandrine
  full_name: Louis, Sandrine
  last_name: Louis
- first_name: Katharina
  full_name: Nimptsch, Katharina
  last_name: Nimptsch
- first_name: Lukas
  full_name: Schwingshackl, Lukas
  last_name: Schwingshackl
- first_name: Roswitha
  full_name: Siener, Roswitha
  last_name: Siener
- first_name: Armin
  full_name: Zittermann, Armin
  last_name: Zittermann
- first_name: Bernhard
  full_name: Watzl, Bernhard
  last_name: Watzl
- first_name: Stefan
  full_name: Lorkowski, Stefan
  last_name: Lorkowski
citation:
  ama: 'Schulze MB, Haardt J, Amini AM, et al. Protein intake and type 2 diabetes
    mellitus: an umbrella review of systematic reviews for the evidence-based guideline
    for protein intake of the German Nutrition Society. <i>European Journal of Nutrition</i>.
    Published online 2023. doi:<a href="https://doi.org/10.1007/s00394-023-03234-5">10.1007/s00394-023-03234-5</a>'
  apa: 'Schulze, M. B., Haardt, J., Amini, A. M., Kalotai, N., Lehmann, A., Schmidt,
    A., Buyken, A., Egert, S., Ellinger, S., Kroke, A., Kühn, T., Louis, S., Nimptsch,
    K., Schwingshackl, L., Siener, R., Zittermann, A., Watzl, B., &#38; Lorkowski,
    S. (2023). Protein intake and type 2 diabetes mellitus: an umbrella review of
    systematic reviews for the evidence-based guideline for protein intake of the
    German Nutrition Society. <i>European Journal of Nutrition</i>. <a href="https://doi.org/10.1007/s00394-023-03234-5">https://doi.org/10.1007/s00394-023-03234-5</a>'
  bibtex: '@article{Schulze_Haardt_Amini_Kalotai_Lehmann_Schmidt_Buyken_Egert_Ellinger_Kroke_et
    al._2023, title={Protein intake and type 2 diabetes mellitus: an umbrella review
    of systematic reviews for the evidence-based guideline for protein intake of the
    German Nutrition Society}, DOI={<a href="https://doi.org/10.1007/s00394-023-03234-5">10.1007/s00394-023-03234-5</a>},
    journal={European Journal of Nutrition}, publisher={Springer Science and Business
    Media LLC}, author={Schulze, Matthias B. and Haardt, Julia and Amini, Anna M.
    and Kalotai, Nicole and Lehmann, Andreas and Schmidt, Annemarie and Buyken, Anette
    and Egert, Sarah and Ellinger, Sabine and Kroke, Anja and et al.}, year={2023}
    }'
  chicago: 'Schulze, Matthias B., Julia Haardt, Anna M. Amini, Nicole Kalotai, Andreas
    Lehmann, Annemarie Schmidt, Anette Buyken, et al. “Protein Intake and Type 2 Diabetes
    Mellitus: An Umbrella Review of Systematic Reviews for the Evidence-Based Guideline
    for Protein Intake of the German Nutrition Society.” <i>European Journal of Nutrition</i>,
    2023. <a href="https://doi.org/10.1007/s00394-023-03234-5">https://doi.org/10.1007/s00394-023-03234-5</a>.'
  ieee: 'M. B. Schulze <i>et al.</i>, “Protein intake and type 2 diabetes mellitus:
    an umbrella review of systematic reviews for the evidence-based guideline for
    protein intake of the German Nutrition Society,” <i>European Journal of Nutrition</i>,
    2023, doi: <a href="https://doi.org/10.1007/s00394-023-03234-5">10.1007/s00394-023-03234-5</a>.'
  mla: 'Schulze, Matthias B., et al. “Protein Intake and Type 2 Diabetes Mellitus:
    An Umbrella Review of Systematic Reviews for the Evidence-Based Guideline for
    Protein Intake of the German Nutrition Society.” <i>European Journal of Nutrition</i>,
    Springer Science and Business Media LLC, 2023, doi:<a href="https://doi.org/10.1007/s00394-023-03234-5">10.1007/s00394-023-03234-5</a>.'
  short: M.B. Schulze, J. Haardt, A.M. Amini, N. Kalotai, A. Lehmann, A. Schmidt,
    A. Buyken, S. Egert, S. Ellinger, A. Kroke, T. Kühn, S. Louis, K. Nimptsch, L.
    Schwingshackl, R. Siener, A. Zittermann, B. Watzl, S. Lorkowski, European Journal
    of Nutrition (2023).
date_created: 2023-10-23T07:35:18Z
date_updated: 2023-10-23T07:35:57Z
department:
- _id: '22'
doi: 10.1007/s00394-023-03234-5
keyword:
- Nutrition and Dietetics
- Medicine (miscellaneous)
language:
- iso: eng
publication: European Journal of Nutrition
publication_identifier:
  issn:
  - 1436-6207
  - 1436-6215
publication_status: published
publisher: Springer Science and Business Media LLC
status: public
title: 'Protein intake and type 2 diabetes mellitus: an umbrella review of systematic
  reviews for the evidence-based guideline for protein intake of the German Nutrition
  Society'
type: journal_article
user_id: '92491'
year: '2023'
...
---
_id: '48433'
author:
- first_name: Lydia
  full_name: Böttger, Lydia
  id: '65153'
  last_name: Böttger
citation:
  ama: 'Böttger L. Lydia Böttger (Universität Paderborn) rezensiert: Burwitz-Melzer,
    Eva; Riemer, Claudia; Schmelter, Lars (Hrsg.) (2022): Feedback beim Lehren und
    Lernen von Fremd- und Zweitsprachen. Arbeitspapiere der 42. Frühjahrs- konferenz
    zur Erforschung des Fremdsprachenunterrichts. [Giessener Beiträge zur Fremdsprachendidaktik].
    Tübingen: Narr Francke Attempto, 245 Seiten. ISBN 978-3- 8233-8569-1. <i>www.daz-portal.de</i>.
    Published online 2023.'
  apa: 'Böttger, L. (2023). Lydia Böttger (Universität Paderborn) rezensiert: Burwitz-Melzer,
    Eva; Riemer, Claudia; Schmelter, Lars (Hrsg.) (2022): Feedback beim Lehren und
    Lernen von Fremd- und Zweitsprachen. Arbeitspapiere der 42. Frühjahrs- konferenz
    zur Erforschung des Fremdsprachenunterrichts. [Giessener Beiträge zur Fremdsprachendidaktik].
    Tübingen: Narr Francke Attempto, 245 Seiten. ISBN 978-3- 8233-8569-1. In <i>www.daz-portal.de</i>.'
  bibtex: '@article{Böttger_2023, title={Lydia Böttger (Universität Paderborn) rezensiert:
    Burwitz-Melzer, Eva; Riemer, Claudia; Schmelter, Lars (Hrsg.) (2022): Feedback
    beim Lehren und Lernen von Fremd- und Zweitsprachen. Arbeitspapiere der 42. Frühjahrs-
    konferenz zur Erforschung des Fremdsprachenunterrichts. [Giessener Beiträge zur
    Fremdsprachendidaktik]. Tübingen: Narr Francke Attempto, 245 Seiten. ISBN 978-3-
    8233-8569-1}, journal={www.daz-portal.de}, author={Böttger, Lydia}, year={2023}
    }'
  chicago: 'Böttger, Lydia. “Lydia Böttger (Universität Paderborn) rezensiert: Burwitz-Melzer,
    Eva; Riemer, Claudia; Schmelter, Lars (Hrsg.) (2022): Feedback beim Lehren und
    Lernen von Fremd- und Zweitsprachen. Arbeitspapiere der 42. Frühjahrs- konferenz
    zur Erforschung des Fremdsprachenunterrichts. [Giessener Beiträge zur Fremdsprachendidaktik].
    Tübingen: Narr Francke Attempto, 245 Seiten. ISBN 978-3- 8233-8569-1.” <i>www.daz-portal.de</i>,
    2023.'
  ieee: 'L. Böttger, “Lydia Böttger (Universität Paderborn) rezensiert: Burwitz-Melzer,
    Eva; Riemer, Claudia; Schmelter, Lars (Hrsg.) (2022): Feedback beim Lehren und
    Lernen von Fremd- und Zweitsprachen. Arbeitspapiere der 42. Frühjahrs- konferenz
    zur Erforschung des Fremdsprachenunterrichts. [Giessener Beiträge zur Fremdsprachendidaktik].
    Tübingen: Narr Francke Attempto, 245 Seiten. ISBN 978-3- 8233-8569-1,” <i>www.daz-portal.de</i>.
    2023.'
  mla: 'Böttger, Lydia. “Lydia Böttger (Universität Paderborn) rezensiert: Burwitz-Melzer,
    Eva; Riemer, Claudia; Schmelter, Lars (Hrsg.) (2022): Feedback beim Lehren und
    Lernen von Fremd- und Zweitsprachen. Arbeitspapiere der 42. Frühjahrs- konferenz
    zur Erforschung des Fremdsprachenunterrichts. [Giessener Beiträge zur Fremdsprachendidaktik].
    Tübingen: Narr Francke Attempto, 245 Seiten. ISBN 978-3- 8233-8569-1.” <i>www.daz-portal.de</i>,
    2023.'
  short: L. Böttger, www.daz-portal.de (2023).
date_created: 2023-10-24T15:40:35Z
date_updated: 2023-10-24T15:50:02Z
department:
- _id: '597'
language:
- iso: ger
main_file_link:
- open_access: '1'
  url: https://www.daz-portal.de/de/rezensionen/pdf-dateien-rezensionen/25-rezensionsrunde-teil-b/5_boettger-rezensiert-burwitz-melzer-et-al.pdf
oa: '1'
publication: www.daz-portal.de
publication_status: published
status: public
title: 'Lydia Böttger (Universität Paderborn) rezensiert: Burwitz-Melzer, Eva; Riemer,
  Claudia; Schmelter, Lars (Hrsg.) (2022): Feedback beim Lehren und Lernen von Fremd-
  und Zweitsprachen. Arbeitspapiere der 42. Frühjahrs- konferenz zur Erforschung des
  Fremdsprachenunterrichts. [Giessener Beiträge zur Fremdsprachendidaktik]. Tübingen:
  Narr Francke Attempto, 245 Seiten. ISBN 978-3- 8233-8569-1'
type: review
user_id: '65153'
year: '2023'
...
---
_id: '48456'
abstract:
- lang: eng
  text: "<jats:title>Abstract</jats:title><jats:sec>\r\n              <jats:title>Purpose</jats:title>\r\n
    \             <jats:p>Our aim was to assess alignment in timing of ‘highest caloric
    intake’ with individual chronotype and its association with body composition in
    adolescents.</jats:p>\r\n            </jats:sec><jats:sec>\r\n              <jats:title>Methods</jats:title>\r\n
    \             <jats:p>We used repeatedly collected data from <jats:italic>n</jats:italic> = 196
    adolescents (age 9–16 years, providing <jats:italic>N</jats:italic> = 401 yearly
    questionnaires) of the DONALD open cohort study. Chronotype was assessed by the
    Munich Chronotype Questionnaire from which midpoint of sleep (MSFsc) was derived.
    A sex- and age-specific diet-chrono-alignment score (DCAS) was calculated as the
    difference in hours between the chronotype-specific median timing of highest caloric
    intake of the studied population and the individual timing of ‘highest caloric
    intake’ or vice versa. Repeated-measures regression models were applied to study
    cross-sectional and longitudinal associations between the DCAS and body composition,
    e.g., Fat Mass Index (FMI) or Fat Free Mass Index (FFMI).</jats:p>\r\n            </jats:sec><jats:sec>\r\n
    \             <jats:title>Results</jats:title>\r\n              <jats:p>DCAS ranged
    from −6:42 h to + 8:01 h and was not associated with body composition. Among adolescents
    with a later chronotype (<jats:italic>N</jats:italic> = 201) a 1 h increase in
    DCAS (later consumption of ‘highest caloric intake’ in comparison to the median
    intake of that group), increased FFMI by 1.92 kg/m<jats:sup>2</jats:sup> (95%
    CI: 0.15, 3.69, <jats:italic>p</jats:italic> value = 0.04) over a median follow-up
    of 0.94 year.</jats:p>\r\n            </jats:sec><jats:sec>\r\n              <jats:title>Conclusion</jats:title>\r\n
    \             <jats:p>Alignment of energy intake with individual chronotype appears
    beneficial for FFMI among those with a late chronotype.</jats:p>\r\n            </jats:sec>"
author:
- first_name: Nicole
  full_name: Jankovic, Nicole
  last_name: Jankovic
- first_name: Sarah
  full_name: Schmitting, Sarah
  last_name: Schmitting
- first_name: Bianca
  full_name: Stutz, Bianca
  id: '77099'
  last_name: Stutz
- first_name: Bettina
  full_name: Krüger, Bettina
  id: '49428'
  last_name: Krüger
  orcid: 0000-0001-5351-1785
- first_name: Anette
  full_name: Buyken, Anette
  id: '65985'
  last_name: Buyken
- first_name: Ute
  full_name: Alexy, Ute
  last_name: Alexy
citation:
  ama: 'Jankovic N, Schmitting S, Stutz B, Krüger B, Buyken A, Alexy U. Alignment
    between timing of ‘highest caloric intake’ and chronotype in relation to body
    composition during adolescence: the DONALD Study. <i>European Journal of Nutrition</i>.
    Published online 2023. doi:<a href="https://doi.org/10.1007/s00394-023-03259-w">10.1007/s00394-023-03259-w</a>'
  apa: 'Jankovic, N., Schmitting, S., Stutz, B., Krüger, B., Buyken, A., &#38; Alexy,
    U. (2023). Alignment between timing of ‘highest caloric intake’ and chronotype
    in relation to body composition during adolescence: the DONALD Study. <i>European
    Journal of Nutrition</i>. <a href="https://doi.org/10.1007/s00394-023-03259-w">https://doi.org/10.1007/s00394-023-03259-w</a>'
  bibtex: '@article{Jankovic_Schmitting_Stutz_Krüger_Buyken_Alexy_2023, title={Alignment
    between timing of ‘highest caloric intake’ and chronotype in relation to body
    composition during adolescence: the DONALD Study}, DOI={<a href="https://doi.org/10.1007/s00394-023-03259-w">10.1007/s00394-023-03259-w</a>},
    journal={European Journal of Nutrition}, publisher={Springer Science and Business
    Media LLC}, author={Jankovic, Nicole and Schmitting, Sarah and Stutz, Bianca and
    Krüger, Bettina and Buyken, Anette and Alexy, Ute}, year={2023} }'
  chicago: 'Jankovic, Nicole, Sarah Schmitting, Bianca Stutz, Bettina Krüger, Anette
    Buyken, and Ute Alexy. “Alignment between Timing of ‘Highest Caloric Intake’ and
    Chronotype in Relation to Body Composition during Adolescence: The DONALD Study.”
    <i>European Journal of Nutrition</i>, 2023. <a href="https://doi.org/10.1007/s00394-023-03259-w">https://doi.org/10.1007/s00394-023-03259-w</a>.'
  ieee: 'N. Jankovic, S. Schmitting, B. Stutz, B. Krüger, A. Buyken, and U. Alexy,
    “Alignment between timing of ‘highest caloric intake’ and chronotype in relation
    to body composition during adolescence: the DONALD Study,” <i>European Journal
    of Nutrition</i>, 2023, doi: <a href="https://doi.org/10.1007/s00394-023-03259-w">10.1007/s00394-023-03259-w</a>.'
  mla: 'Jankovic, Nicole, et al. “Alignment between Timing of ‘Highest Caloric Intake’
    and Chronotype in Relation to Body Composition during Adolescence: The DONALD
    Study.” <i>European Journal of Nutrition</i>, Springer Science and Business Media
    LLC, 2023, doi:<a href="https://doi.org/10.1007/s00394-023-03259-w">10.1007/s00394-023-03259-w</a>.'
  short: N. Jankovic, S. Schmitting, B. Stutz, B. Krüger, A. Buyken, U. Alexy, European
    Journal of Nutrition (2023).
date_created: 2023-10-25T08:38:46Z
date_updated: 2023-10-25T08:39:21Z
department:
- _id: '22'
doi: 10.1007/s00394-023-03259-w
keyword:
- Nutrition and Dietetics
- Medicine (miscellaneous)
language:
- iso: eng
publication: European Journal of Nutrition
publication_identifier:
  issn:
  - 1436-6207
  - 1436-6215
publication_status: published
publisher: Springer Science and Business Media LLC
status: public
title: 'Alignment between timing of ‘highest caloric intake’ and chronotype in relation
  to body composition during adolescence: the DONALD Study'
type: journal_article
user_id: '92491'
year: '2023'
...
---
_id: '48570'
author:
- first_name: Cederic
  full_name: Lenz, Cederic
  last_name: Lenz
- first_name: Christian
  full_name: Henke, Christian
  last_name: Henke
- first_name: Ansgar
  full_name: Trächtler, Ansgar
  id: '552'
  last_name: Trächtler
citation:
  ama: 'Lenz C, Henke C, Trächtler A. A Methodical Approach to Hybrid Modelling for
    Contextual Anomaly Detection on Time-Series Data. In: <i>2023 IEEE 21st International
    Conference on Industrial Informatics (INDIN)</i>. IEEE; 2023. doi:<a href="https://doi.org/10.1109/indin51400.2023.10218108">10.1109/indin51400.2023.10218108</a>'
  apa: Lenz, C., Henke, C., &#38; Trächtler, A. (2023). A Methodical Approach to Hybrid
    Modelling for Contextual Anomaly Detection on Time-Series Data. <i>2023 IEEE 21st
    International Conference on Industrial Informatics (INDIN)</i>. <a href="https://doi.org/10.1109/indin51400.2023.10218108">https://doi.org/10.1109/indin51400.2023.10218108</a>
  bibtex: '@inproceedings{Lenz_Henke_Trächtler_2023, title={A Methodical Approach
    to Hybrid Modelling for Contextual Anomaly Detection on Time-Series Data}, DOI={<a
    href="https://doi.org/10.1109/indin51400.2023.10218108">10.1109/indin51400.2023.10218108</a>},
    booktitle={2023 IEEE 21st International Conference on Industrial Informatics (INDIN)},
    publisher={IEEE}, author={Lenz, Cederic and Henke, Christian and Trächtler, Ansgar},
    year={2023} }'
  chicago: Lenz, Cederic, Christian Henke, and Ansgar Trächtler. “A Methodical Approach
    to Hybrid Modelling for Contextual Anomaly Detection on Time-Series Data.” In
    <i>2023 IEEE 21st International Conference on Industrial Informatics (INDIN)</i>.
    IEEE, 2023. <a href="https://doi.org/10.1109/indin51400.2023.10218108">https://doi.org/10.1109/indin51400.2023.10218108</a>.
  ieee: 'C. Lenz, C. Henke, and A. Trächtler, “A Methodical Approach to Hybrid Modelling
    for Contextual Anomaly Detection on Time-Series Data,” 2023, doi: <a href="https://doi.org/10.1109/indin51400.2023.10218108">10.1109/indin51400.2023.10218108</a>.'
  mla: Lenz, Cederic, et al. “A Methodical Approach to Hybrid Modelling for Contextual
    Anomaly Detection on Time-Series Data.” <i>2023 IEEE 21st International Conference
    on Industrial Informatics (INDIN)</i>, IEEE, 2023, doi:<a href="https://doi.org/10.1109/indin51400.2023.10218108">10.1109/indin51400.2023.10218108</a>.
  short: 'C. Lenz, C. Henke, A. Trächtler, in: 2023 IEEE 21st International Conference
    on Industrial Informatics (INDIN), IEEE, 2023.'
date_created: 2023-10-31T13:49:23Z
date_updated: 2023-10-31T13:50:43Z
department:
- _id: '153'
- _id: '241'
doi: 10.1109/indin51400.2023.10218108
language:
- iso: eng
publication: 2023 IEEE 21st International Conference on Industrial Informatics (INDIN)
publication_status: published
publisher: IEEE
quality_controlled: '1'
status: public
title: A Methodical Approach to Hybrid Modelling for Contextual Anomaly Detection
  on Time-Series Data
type: conference
user_id: '41470'
year: '2023'
...
---
_id: '48572'
abstract:
- lang: eng
  text: <jats:p>Abstract. To increase the sustainability of forming processes such
    as punch bending, homogenization of the processed semi-finished product is an
    essential step in the manufacturing process. High-strength wire materials are
    usually available as strip material before being further processed in a forming
    process. For storage and transport, the material is coiled onto coils and transported
    to the customer. During the coiling process, residual stresses and plastic deformation
    are introduced into the wire. Thus, the final product quality is also influenced
    by the geometry of the coil. Straightening machines are used in production lines
    to compensate for these. Once a straightening machine has been set up, the settings
    for the roll positions are usually not changed. As a result, there is no reaction
    to material fluctuations, which means that the components to be produced do not
    meet the dimensional accuracy requirements. This leads to an increase in the rejection
    rate in manufacturing processes. To reduce the rejection rate, it is necessary
    to enable dynamic and flexible infeed of the straightening rollers. In this context,
    an innovative control concept with disturbance compensation was developed for
    the straightening process. The disturbance compensation uses a disturbance model
    that predicts the change in bending curvature over the coil radius. With this
    prediction, the straightening machine can be adjusted specifically. The roller
    positions are adjusted by a subordinate position control. The additional feedback
    from measured geometric product properties from the following punching-bending
    process enables the straightening machine to be adjusted even in the case of unforeseen
    fluctuations in the material properties. In this way, it is possible to react
    to any material fluctuations as required. This novel, demand-oriented adjustment
    of the straightening machine is expected to result in a high increase in the efficiency
    of the production process and a reduction of the rejection rate. </jats:p>
author:
- first_name: Lukas
  full_name: Bathelt, Lukas
  last_name: Bathelt
- first_name: Eugen
  full_name: Djakow, Eugen
  id: '7904'
  last_name: Djakow
- first_name: Christian
  full_name: Henke, Christian
  last_name: Henke
- first_name: Ansgar
  full_name: Trächtler, Ansgar
  id: '552'
  last_name: Trächtler
citation:
  ama: 'Bathelt L, Djakow E, Henke C, Trächtler A. Innovative self-learning disturbance
    compensation for straightening processes. In: <i>Materials Research Proceedings</i>.
    Materials Research Forum LLC; 2023. doi:<a href="https://doi.org/10.21741/9781644902479-216">10.21741/9781644902479-216</a>'
  apa: Bathelt, L., Djakow, E., Henke, C., &#38; Trächtler, A. (2023). Innovative
    self-learning disturbance compensation for straightening processes. <i>Materials
    Research Proceedings</i>. <a href="https://doi.org/10.21741/9781644902479-216">https://doi.org/10.21741/9781644902479-216</a>
  bibtex: '@inproceedings{Bathelt_Djakow_Henke_Trächtler_2023, title={Innovative self-learning
    disturbance compensation for straightening processes}, DOI={<a href="https://doi.org/10.21741/9781644902479-216">10.21741/9781644902479-216</a>},
    booktitle={Materials Research Proceedings}, publisher={Materials Research Forum
    LLC}, author={Bathelt, Lukas and Djakow, Eugen and Henke, Christian and Trächtler,
    Ansgar}, year={2023} }'
  chicago: Bathelt, Lukas, Eugen Djakow, Christian Henke, and Ansgar Trächtler. “Innovative
    Self-Learning Disturbance Compensation for Straightening Processes.” In <i>Materials
    Research Proceedings</i>. Materials Research Forum LLC, 2023. <a href="https://doi.org/10.21741/9781644902479-216">https://doi.org/10.21741/9781644902479-216</a>.
  ieee: 'L. Bathelt, E. Djakow, C. Henke, and A. Trächtler, “Innovative self-learning
    disturbance compensation for straightening processes,” 2023, doi: <a href="https://doi.org/10.21741/9781644902479-216">10.21741/9781644902479-216</a>.'
  mla: Bathelt, Lukas, et al. “Innovative Self-Learning Disturbance Compensation for
    Straightening Processes.” <i>Materials Research Proceedings</i>, Materials Research
    Forum LLC, 2023, doi:<a href="https://doi.org/10.21741/9781644902479-216">10.21741/9781644902479-216</a>.
  short: 'L. Bathelt, E. Djakow, C. Henke, A. Trächtler, in: Materials Research Proceedings,
    Materials Research Forum LLC, 2023.'
date_created: 2023-10-31T14:08:16Z
date_updated: 2023-10-31T14:31:51Z
department:
- _id: '153'
- _id: '241'
doi: 10.21741/9781644902479-216
language:
- iso: eng
publication: Materials Research Proceedings
publication_identifier:
  issn:
  - 2474-395X
publication_status: published
publisher: Materials Research Forum LLC
quality_controlled: '1'
status: public
title: Innovative self-learning disturbance compensation for straightening processes
type: conference
user_id: '41470'
year: '2023'
...