---
_id: '44326'
abstract:
- lang: eng
text: "Low-quality models that miss relevant dynamics lead to major challenges in
modelbased\r\nstate estimation. We address this issue by simultaneously estimating
the system’s states\r\nand its model inaccuracies by a square root unscented Kalman
filter (SRUKF). Concretely,\r\nwe augment the state with the parameter vector
of a linear combination containing suitable\r\nfunctions that approximate the
lacking dynamics. Presuming that only a few dynamical terms\r\nare relevant, the
parameter vector is claimed to be sparse. In Bayesian setting, properties like\r\nsparsity
are expressed by a prior distribution. One common choice for sparsity is a Laplace\r\ndistribution.
However, due to disadvantages of a Laplacian prior in regards to the SRUKF,\r\nthe
regularized horseshoe distribution, a Gaussian that approximately features sparsity,
is\r\napplied instead. Results exhibit small estimation errors with model improvements
detected by\r\nan automated model reduction technique."
author:
- first_name: Ricarda-Samantha
full_name: Götte, Ricarda-Samantha
id: '43992'
last_name: Götte
- first_name: Julia
full_name: Timmermann, Julia
id: '15402'
last_name: Timmermann
citation:
ama: 'Götte R-S, Timmermann J. Approximating a Laplacian Prior for Joint State and
Model Estimation within an UKF. In: IFAC-PapersOnLine. Vol 56. ; 2023:869-874.'
apa: Götte, R.-S., & Timmermann, J. (2023). Approximating a Laplacian Prior
for Joint State and Model Estimation within an UKF. IFAC-PapersOnLine,
56(2), 869–874.
bibtex: '@inproceedings{Götte_Timmermann_2023, title={Approximating a Laplacian
Prior for Joint State and Model Estimation within an UKF}, volume={56}, number={2},
booktitle={IFAC-PapersOnLine}, author={Götte, Ricarda-Samantha and Timmermann,
Julia}, year={2023}, pages={869–874} }'
chicago: Götte, Ricarda-Samantha, and Julia Timmermann. “Approximating a Laplacian
Prior for Joint State and Model Estimation within an UKF.” In IFAC-PapersOnLine,
56:869–74, 2023.
ieee: R.-S. Götte and J. Timmermann, “Approximating a Laplacian Prior for Joint
State and Model Estimation within an UKF,” in IFAC-PapersOnLine, Yokohama,
Japan, 2023, vol. 56, no. 2, pp. 869–874.
mla: Götte, Ricarda-Samantha, and Julia Timmermann. “Approximating a Laplacian Prior
for Joint State and Model Estimation within an UKF.” IFAC-PapersOnLine,
vol. 56, no. 2, 2023, pp. 869–74.
short: 'R.-S. Götte, J. Timmermann, in: IFAC-PapersOnLine, 2023, pp. 869–874.'
conference:
end_date: 2023-07-14
location: Yokohama, Japan
name: 22nd IFAC World Congress
start_date: 2023-07-09
date_created: 2023-05-02T15:16:43Z
date_updated: 2024-11-13T08:42:37Z
department:
- _id: '153'
- _id: '880'
intvolume: ' 56'
issue: '2'
keyword:
- joint estimation
- unscented Kalman filter
- sparsity
- Laplacian prior
- regularized horseshoe
- principal component analysis
language:
- iso: eng
page: 869-874
publication: IFAC-PapersOnLine
quality_controlled: '1'
status: public
title: Approximating a Laplacian Prior for Joint State and Model Estimation within
an UKF
type: conference
user_id: '43992'
volume: 56
year: '2023'
...
---
_id: '48482'
author:
- first_name: Ricarda-Samantha
full_name: Götte, Ricarda-Samantha
id: '43992'
last_name: Götte
- first_name: Jo Noel
full_name: Klusmann, Jo Noel
last_name: Klusmann
- first_name: Julia
full_name: Timmermann, Julia
id: '15402'
last_name: Timmermann
citation:
ama: 'Götte R-S, Klusmann JN, Timmermann J. Data-driven identification of disturbances
using a sliding mode observer. In: Proceedings - 33. Workshop Computational
Intelligence: Berlin, 23.-24. November 2023. ; 2023:113-123. doi:10.5445/KSP/1000162754'
apa: 'Götte, R.-S., Klusmann, J. N., & Timmermann, J. (2023). Data-driven identification
of disturbances using a sliding mode observer. Proceedings - 33. Workshop Computational
Intelligence: Berlin, 23.-24. November 2023, 113–123. https://doi.org/10.5445/KSP/1000162754'
bibtex: '@inproceedings{Götte_Klusmann_Timmermann_2023, title={Data-driven identification
of disturbances using a sliding mode observer}, DOI={10.5445/KSP/1000162754},
booktitle={Proceedings - 33. Workshop Computational Intelligence: Berlin, 23.-24.
November 2023}, author={Götte, Ricarda-Samantha and Klusmann, Jo Noel and Timmermann,
Julia}, year={2023}, pages={113–123} }'
chicago: 'Götte, Ricarda-Samantha, Jo Noel Klusmann, and Julia Timmermann. “Data-Driven
Identification of Disturbances Using a Sliding Mode Observer.” In Proceedings
- 33. Workshop Computational Intelligence: Berlin, 23.-24. November 2023,
113–23, 2023. https://doi.org/10.5445/KSP/1000162754.'
ieee: 'R.-S. Götte, J. N. Klusmann, and J. Timmermann, “Data-driven identification
of disturbances using a sliding mode observer,” in Proceedings - 33. Workshop
Computational Intelligence: Berlin, 23.-24. November 2023, Berlin, Germany,
2023, pp. 113–123, doi: 10.5445/KSP/1000162754.'
mla: 'Götte, Ricarda-Samantha, et al. “Data-Driven Identification of Disturbances
Using a Sliding Mode Observer.” Proceedings - 33. Workshop Computational Intelligence:
Berlin, 23.-24. November 2023, 2023, pp. 113–23, doi:10.5445/KSP/1000162754.'
short: 'R.-S. Götte, J.N. Klusmann, J. Timmermann, in: Proceedings - 33. Workshop
Computational Intelligence: Berlin, 23.-24. November 2023, 2023, pp. 113–123.'
conference:
end_date: 2023-11-24
location: Berlin, Germany
name: 33. Workshop Computational Intelligence
start_date: 2023-11-23
date_created: 2023-10-26T08:11:25Z
date_updated: 2024-11-13T08:42:53Z
department:
- _id: '153'
- _id: '880'
doi: 10.5445/KSP/1000162754
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.ksp.kit.edu/site/books/e/10.5445/KSP/1000162754/
oa: '1'
page: 113-123
publication: 'Proceedings - 33. Workshop Computational Intelligence: Berlin, 23.-24.
November 2023'
quality_controlled: '1'
status: public
title: Data-driven identification of disturbances using a sliding mode observer
type: conference
user_id: '43992'
year: '2023'
...
---
_id: '48476'
author:
- first_name: Michael
full_name: Hesse, Michael
id: '29222'
last_name: Hesse
- first_name: Julia
full_name: Timmermann, Julia
id: '15402'
last_name: Timmermann
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
citation:
ama: 'Hesse M, Timmermann J, Trächtler A. Hybrid Optimal Control for Dynamical Systems
using Gaussian Process Regression and Unscented Transform*. In: 2023
European Control Conference (ECC). IEEE; 2023. doi:10.23919/ecc57647.2023.10178368'
apa: Hesse, M., Timmermann, J., & Trächtler, A. (2023). Hybrid Optimal Control
for Dynamical Systems using Gaussian Process Regression and Unscented Transform*.
2023 European Control Conference (ECC). https://doi.org/10.23919/ecc57647.2023.10178368
bibtex: '@inproceedings{Hesse_Timmermann_Trächtler_2023, title={Hybrid Optimal Control
for Dynamical Systems using Gaussian Process Regression and Unscented Transform*},
DOI={10.23919/ecc57647.2023.10178368},
booktitle={2023 European Control Conference (ECC)}, publisher={IEEE}, author={Hesse,
Michael and Timmermann, Julia and Trächtler, Ansgar}, year={2023} }'
chicago: Hesse, Michael, Julia Timmermann, and Ansgar Trächtler. “Hybrid Optimal
Control for Dynamical Systems Using Gaussian Process Regression and Unscented
Transform*.” In 2023 European Control Conference (ECC). IEEE,
2023. https://doi.org/10.23919/ecc57647.2023.10178368.
ieee: 'M. Hesse, J. Timmermann, and A. Trächtler, “Hybrid Optimal Control for Dynamical
Systems using Gaussian Process Regression and Unscented Transform*,”
2023, doi: 10.23919/ecc57647.2023.10178368.'
mla: Hesse, Michael, et al. “Hybrid Optimal Control for Dynamical Systems Using
Gaussian Process Regression and Unscented Transform*.” 2023 European
Control Conference (ECC), IEEE, 2023, doi:10.23919/ecc57647.2023.10178368.
short: 'M. Hesse, J. Timmermann, A. Trächtler, in: 2023 European Control Conference
(ECC), IEEE, 2023.'
date_created: 2023-10-25T13:56:34Z
date_updated: 2024-11-13T08:43:40Z
department:
- _id: '153'
- _id: '880'
doi: 10.23919/ecc57647.2023.10178368
language:
- iso: eng
publication: 2023 European Control Conference (ECC)
publication_status: published
publisher: IEEE
quality_controlled: '1'
status: public
title: Hybrid Optimal Control for Dynamical Systems using Gaussian Process Regression
and Unscented Transform*
type: conference
user_id: '82875'
year: '2023'
...
---
_id: '50070'
author:
- first_name: Annika
full_name: Junker, Annika
id: '41470'
last_name: Junker
orcid: 0009-0002-6475-2503
- first_name: Keno Egon Friedrich
full_name: Pape, Keno Egon Friedrich
id: '52024'
last_name: Pape
- first_name: Julia
full_name: Timmermann, Julia
id: '15402'
last_name: Timmermann
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
citation:
ama: Junker A, Pape KEF, Timmermann J, Trächtler A. Adaptive Koopman-Based Models
for Holistic Controller and Observer Design. IFAC-PapersOnLine. 2023;56(3):625-630.
doi:10.1016/j.ifacol.2023.12.094
apa: Junker, A., Pape, K. E. F., Timmermann, J., & Trächtler, A. (2023). Adaptive
Koopman-Based Models for Holistic Controller and Observer Design. IFAC-PapersOnLine,
56(3), 625–630. https://doi.org/10.1016/j.ifacol.2023.12.094
bibtex: '@article{Junker_Pape_Timmermann_Trächtler_2023, title={Adaptive Koopman-Based
Models for Holistic Controller and Observer Design}, volume={56}, DOI={10.1016/j.ifacol.2023.12.094},
number={3}, journal={IFAC-PapersOnLine}, publisher={Elsevier BV}, author={Junker,
Annika and Pape, Keno Egon Friedrich and Timmermann, Julia and Trächtler, Ansgar},
year={2023}, pages={625–630} }'
chicago: 'Junker, Annika, Keno Egon Friedrich Pape, Julia Timmermann, and Ansgar
Trächtler. “Adaptive Koopman-Based Models for Holistic Controller and Observer
Design.” IFAC-PapersOnLine 56, no. 3 (2023): 625–30. https://doi.org/10.1016/j.ifacol.2023.12.094.'
ieee: 'A. Junker, K. E. F. Pape, J. Timmermann, and A. Trächtler, “Adaptive Koopman-Based
Models for Holistic Controller and Observer Design,” IFAC-PapersOnLine,
vol. 56, no. 3, pp. 625–630, 2023, doi: 10.1016/j.ifacol.2023.12.094.'
mla: Junker, Annika, et al. “Adaptive Koopman-Based Models for Holistic Controller
and Observer Design.” IFAC-PapersOnLine, vol. 56, no. 3, Elsevier BV, 2023,
pp. 625–30, doi:10.1016/j.ifacol.2023.12.094.
short: A. Junker, K.E.F. Pape, J. Timmermann, A. Trächtler, IFAC-PapersOnLine 56
(2023) 625–630.
date_created: 2023-12-25T11:55:19Z
date_updated: 2024-11-13T12:28:18Z
department:
- _id: '153'
- _id: '880'
doi: 10.1016/j.ifacol.2023.12.094
intvolume: ' 56'
issue: '3'
keyword:
- General Medicine
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://doi.org/10.1016/j.ifacol.2023.12.094
oa: '1'
page: 625-630
project:
- _id: '690'
name: 'DART: Datengetriebene Methoden in der Regelungstechnik'
publication: IFAC-PapersOnLine
publication_identifier:
issn:
- 2405-8963
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: Adaptive Koopman-Based Models for Holistic Controller and Observer Design
type: journal_article
user_id: '41470'
volume: 56
year: '2023'
...
---
_id: '58350'
author:
- first_name: Gregor
full_name: Reschke, Gregor
last_name: Reschke
- first_name: Alexander
full_name: Brosius, Alexander
last_name: Brosius
citation:
ama: 'Reschke G, Brosius A. Investigations on Continuous Transient Dynamic Analysis
of Clinched Aluminum Sheets. In: Lecture Notes in Production Engineering.
Springer Nature Switzerland; 2023. doi:10.1007/978-3-031-47394-4_8'
apa: Reschke, G., & Brosius, A. (2023). Investigations on Continuous Transient
Dynamic Analysis of Clinched Aluminum Sheets. In Lecture Notes in Production
Engineering. Springer Nature Switzerland. https://doi.org/10.1007/978-3-031-47394-4_8
bibtex: '@inbook{Reschke_Brosius_2023, place={Cham}, title={Investigations on Continuous
Transient Dynamic Analysis of Clinched Aluminum Sheets}, DOI={10.1007/978-3-031-47394-4_8},
booktitle={Lecture Notes in Production Engineering}, publisher={Springer Nature
Switzerland}, author={Reschke, Gregor and Brosius, Alexander}, year={2023} }'
chicago: 'Reschke, Gregor, and Alexander Brosius. “Investigations on Continuous
Transient Dynamic Analysis of Clinched Aluminum Sheets.” In Lecture Notes in
Production Engineering. Cham: Springer Nature Switzerland, 2023. https://doi.org/10.1007/978-3-031-47394-4_8.'
ieee: 'G. Reschke and A. Brosius, “Investigations on Continuous Transient Dynamic
Analysis of Clinched Aluminum Sheets,” in Lecture Notes in Production Engineering,
Cham: Springer Nature Switzerland, 2023.'
mla: Reschke, Gregor, and Alexander Brosius. “Investigations on Continuous Transient
Dynamic Analysis of Clinched Aluminum Sheets.” Lecture Notes in Production
Engineering, Springer Nature Switzerland, 2023, doi:10.1007/978-3-031-47394-4_8.
short: 'G. Reschke, A. Brosius, in: Lecture Notes in Production Engineering, Springer
Nature Switzerland, Cham, 2023.'
date_created: 2025-01-23T19:30:39Z
date_updated: 2025-01-23T19:32:00Z
department:
- _id: '43'
- _id: '157'
doi: 10.1007/978-3-031-47394-4_8
language:
- iso: eng
place: Cham
project:
- _id: '130'
grant_number: '418701707'
name: 'TRR 285: TRR 285: Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen
Prozessketten'
- _id: '133'
name: 'TRR 285 - C: TRR 285 - Project Area C'
- _id: '148'
name: 'TRR 285 – C04: TRR 285 - Subproject C04'
publication: Lecture Notes in Production Engineering
publication_identifier:
isbn:
- '9783031473937'
- '9783031473944'
issn:
- 2194-0525
- 2194-0533
publication_status: published
publisher: Springer Nature Switzerland
status: public
title: Investigations on Continuous Transient Dynamic Analysis of Clinched Aluminum
Sheets
type: book_chapter
user_id: '98812'
year: '2023'
...
---
_id: '52614'
author:
- first_name: Christian Roman
full_name: Bielak, Christian Roman
id: '34782'
last_name: Bielak
- first_name: Max
full_name: Böhnke, Max
id: '45779'
last_name: Böhnke
- first_name: Mathias
full_name: Bobbert, Mathias
id: '7850'
last_name: Bobbert
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: 'Bielak CR, Böhnke M, Bobbert M, Meschut G. Numerical Investigation of the
Coupled Friction Behavior in the Clinching Process Chain. In: Lecture Notes
in Mechanical Engineering. Springer Nature Switzerland; 2023. doi:10.1007/978-3-031-41341-4_15'
apa: Bielak, C. R., Böhnke, M., Bobbert, M., & Meschut, G. (2023). Numerical
Investigation of the Coupled Friction Behavior in the Clinching Process Chain.
In Lecture Notes in Mechanical Engineering. Springer Nature Switzerland.
https://doi.org/10.1007/978-3-031-41341-4_15
bibtex: '@inbook{Bielak_Böhnke_Bobbert_Meschut_2023, place={Cham}, title={Numerical
Investigation of the Coupled Friction Behavior in the Clinching Process Chain},
DOI={10.1007/978-3-031-41341-4_15},
booktitle={Lecture Notes in Mechanical Engineering}, publisher={Springer Nature
Switzerland}, author={Bielak, Christian Roman and Böhnke, Max and Bobbert, Mathias
and Meschut, Gerson}, year={2023} }'
chicago: 'Bielak, Christian Roman, Max Böhnke, Mathias Bobbert, and Gerson Meschut.
“Numerical Investigation of the Coupled Friction Behavior in the Clinching Process
Chain.” In Lecture Notes in Mechanical Engineering. Cham: Springer Nature
Switzerland, 2023. https://doi.org/10.1007/978-3-031-41341-4_15.'
ieee: 'C. R. Bielak, M. Böhnke, M. Bobbert, and G. Meschut, “Numerical Investigation
of the Coupled Friction Behavior in the Clinching Process Chain,” in Lecture
Notes in Mechanical Engineering, Cham: Springer Nature Switzerland, 2023.'
mla: Bielak, Christian Roman, et al. “Numerical Investigation of the Coupled Friction
Behavior in the Clinching Process Chain.” Lecture Notes in Mechanical Engineering,
Springer Nature Switzerland, 2023, doi:10.1007/978-3-031-41341-4_15.
short: 'C.R. Bielak, M. Böhnke, M. Bobbert, G. Meschut, in: Lecture Notes in Mechanical
Engineering, Springer Nature Switzerland, Cham, 2023.'
date_created: 2024-03-18T11:56:52Z
date_updated: 2025-01-28T08:55:05Z
department:
- _id: '157'
doi: 10.1007/978-3-031-41341-4_15
language:
- iso: eng
place: Cham
project:
- _id: '130'
grant_number: '418701707'
name: 'TRR 285: TRR 285'
- _id: '131'
name: 'TRR 285 - A: TRR 285 - Project Area A'
publication: Lecture Notes in Mechanical Engineering
publication_identifier:
isbn:
- '9783031413407'
- '9783031413414'
issn:
- 2195-4356
- 2195-4364
publication_status: published
publisher: Springer Nature Switzerland
quality_controlled: '1'
status: public
title: Numerical Investigation of the Coupled Friction Behavior in the Clinching Process
Chain
type: book_chapter
user_id: '45779'
year: '2023'
...
---
_id: '52688'
author:
- first_name: Philipp
full_name: Bähr, Philipp
last_name: Bähr
- first_name: Marius
full_name: Striewe, Marius
id: '30228'
last_name: Striewe
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: Silke
full_name: Sommer, Silke
last_name: Sommer
- first_name: David
full_name: Hein, David
id: '7728'
last_name: Hein
citation:
ama: 'Bähr P, Striewe M, Meschut G, Sommer S, Hein D. Ersatzmodellentwicklung zur
Berücksichtigung der lokalen Fügeelementkinematik in mechanisch gefügten Verbindungen
für die Bauteilauslegung im stahlintensiven Karosseriebau. In: 13. Kolloquium:
Gemeinsame Forschung in der Mechanischen Fügetechnik. ; 2023.'
apa: 'Bähr, P., Striewe, M., Meschut, G., Sommer, S., & Hein, D. (2023). Ersatzmodellentwicklung
zur Berücksichtigung der lokalen Fügeelementkinematik in mechanisch gefügten Verbindungen
für die Bauteilauslegung im stahlintensiven Karosseriebau. 13. Kolloquium:
Gemeinsame Forschung in der Mechanischen Fügetechnik. 13. Kolloquium: Gemeinsame
Forschung in der Mechanischen Fügetechnik.'
bibtex: '@inproceedings{Bähr_Striewe_Meschut_Sommer_Hein_2023, title={Ersatzmodellentwicklung
zur Berücksichtigung der lokalen Fügeelementkinematik in mechanisch gefügten Verbindungen
für die Bauteilauslegung im stahlintensiven Karosseriebau}, booktitle={13. Kolloquium:
Gemeinsame Forschung in der Mechanischen Fügetechnik}, author={Bähr, Philipp and
Striewe, Marius and Meschut, Gerson and Sommer, Silke and Hein, David}, year={2023}
}'
chicago: 'Bähr, Philipp, Marius Striewe, Gerson Meschut, Silke Sommer, and David
Hein. “Ersatzmodellentwicklung zur Berücksichtigung der lokalen Fügeelementkinematik
in mechanisch gefügten Verbindungen für die Bauteilauslegung im stahlintensiven
Karosseriebau.” In 13. Kolloquium: Gemeinsame Forschung in der Mechanischen
Fügetechnik, 2023.'
ieee: 'P. Bähr, M. Striewe, G. Meschut, S. Sommer, and D. Hein, “Ersatzmodellentwicklung
zur Berücksichtigung der lokalen Fügeelementkinematik in mechanisch gefügten Verbindungen
für die Bauteilauslegung im stahlintensiven Karosseriebau,” presented at the 13.
Kolloquium: Gemeinsame Forschung in der Mechanischen Fügetechnik, 2023.'
mla: 'Bähr, Philipp, et al. “Ersatzmodellentwicklung zur Berücksichtigung der lokalen
Fügeelementkinematik in mechanisch gefügten Verbindungen für die Bauteilauslegung
im stahlintensiven Karosseriebau.” 13. Kolloquium: Gemeinsame Forschung in
der Mechanischen Fügetechnik, 2023.'
short: 'P. Bähr, M. Striewe, G. Meschut, S. Sommer, D. Hein, in: 13. Kolloquium:
Gemeinsame Forschung in der Mechanischen Fügetechnik, 2023.'
conference:
end_date: 2023-11-30
name: '13. Kolloquium: Gemeinsame Forschung in der Mechanischen Fügetechnik'
start_date: 2023-11-29
date_created: 2024-03-20T13:50:25Z
date_updated: 2025-01-28T08:41:48Z
department:
- _id: '157'
language:
- iso: ger
publication: '13. Kolloquium: Gemeinsame Forschung in der Mechanischen Fügetechnik'
status: public
title: Ersatzmodellentwicklung zur Berücksichtigung der lokalen Fügeelementkinematik
in mechanisch gefügten Verbindungen für die Bauteilauslegung im stahlintensiven
Karosseriebau
type: conference_abstract
user_id: '30228'
year: '2023'
...
---
_id: '46494'
abstract:
- lang: eng
text: To improve the mechanical performance and to address current shortcomings
of adhesive bonds such as bond degradation due to aging, a pulsed laser surface
pretreatment of the metal surfaces of aluminum AW 6082-T6 joints with epoxy adhesive
E320 is investigated. The surface treatment of the specimens resulted in increased
single-lap shear (SLS) strengths before and after hydrothermal aging in 80°C hot
water compared to nonpretreated reference specimens. In order to reveal the correlations
of laser parameters, resulting surface morphologies and the SLS strength, differently
laser pretreated surfaces were characterized at the micro- and nanoscale using
optical and scanning electron microscopies. The surface enlargement was quantified
with a digital image analysis of cross-sections prepared from the joint interfaces.
An analysis of variances (ANOVA) of the SLS results indicated that the laser parameters
power and pulse frequency were most critical for obtaining high SLS strengths.
Pretreated joint surfaces with a high micro- and nano-surface enlargement and
deep solidification structures provide high SLS strengths of up to 50 MPa and
almost negligible aging losses of merely 4%. Undercut structures on the pretreated
surfaces were found to be beneficial for the mechanical and aging properties when
only limited micro- and nanostructuring was applied.
article_type: original
author:
- first_name: Jonathan
full_name: Freund, Jonathan
last_name: Freund
- first_name: Miriam
full_name: Löbbecke, Miriam
last_name: Löbbecke
- first_name: Alexander
full_name: Delp, Alexander
last_name: Delp
- first_name: Frank
full_name: Walther, Frank
last_name: Walther
- first_name: Shuang
full_name: Wu, Shuang
id: '48039'
last_name: Wu
orcid: 0000-0001-8645-9952
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
- first_name: Jan
full_name: Haubrich, Jan
last_name: Haubrich
citation:
ama: Freund J, Löbbecke M, Delp A, et al. Relationship between laser-generated micro-
and nanostructures and the long-term stability of bonded epoxy-aluminum joints.
The Journal of Adhesion. Published online 2023:1-31. doi:10.1080/00218464.2023.2223475
apa: Freund, J., Löbbecke, M., Delp, A., Walther, F., Wu, S., Tröster, T., &
Haubrich, J. (2023). Relationship between laser-generated micro- and nanostructures
and the long-term stability of bonded epoxy-aluminum joints. The Journal of
Adhesion, 1–31. https://doi.org/10.1080/00218464.2023.2223475
bibtex: '@article{Freund_Löbbecke_Delp_Walther_Wu_Tröster_Haubrich_2023, title={Relationship
between laser-generated micro- and nanostructures and the long-term stability
of bonded epoxy-aluminum joints}, DOI={10.1080/00218464.2023.2223475},
journal={The Journal of Adhesion}, publisher={Informa UK Limited}, author={Freund,
Jonathan and Löbbecke, Miriam and Delp, Alexander and Walther, Frank and Wu, Shuang
and Tröster, Thomas and Haubrich, Jan}, year={2023}, pages={1–31} }'
chicago: Freund, Jonathan, Miriam Löbbecke, Alexander Delp, Frank Walther, Shuang
Wu, Thomas Tröster, and Jan Haubrich. “Relationship between Laser-Generated Micro-
and Nanostructures and the Long-Term Stability of Bonded Epoxy-Aluminum Joints.”
The Journal of Adhesion, 2023, 1–31. https://doi.org/10.1080/00218464.2023.2223475.
ieee: 'J. Freund et al., “Relationship between laser-generated micro- and
nanostructures and the long-term stability of bonded epoxy-aluminum joints,” The
Journal of Adhesion, pp. 1–31, 2023, doi: 10.1080/00218464.2023.2223475.'
mla: Freund, Jonathan, et al. “Relationship between Laser-Generated Micro- and Nanostructures
and the Long-Term Stability of Bonded Epoxy-Aluminum Joints.” The Journal of
Adhesion, Informa UK Limited, 2023, pp. 1–31, doi:10.1080/00218464.2023.2223475.
short: J. Freund, M. Löbbecke, A. Delp, F. Walther, S. Wu, T. Tröster, J. Haubrich,
The Journal of Adhesion (2023) 1–31.
date_created: 2023-08-15T10:22:38Z
date_updated: 2025-01-30T12:35:30Z
department:
- _id: '321'
- _id: '149'
- _id: '9'
doi: 10.1080/00218464.2023.2223475
keyword:
- Materials Chemistry
- Surfaces
- Coatings and Films
- Surfaces and Interfaces
- Mechanics of Materials
- General Chemistry
language:
- iso: eng
page: 1-31
publication: The Journal of Adhesion
publication_identifier:
issn:
- 0021-8464
- 1545-5823
publication_status: published
publisher: Informa UK Limited
quality_controlled: '1'
status: public
title: Relationship between laser-generated micro- and nanostructures and the long-term
stability of bonded epoxy-aluminum joints
type: journal_article
user_id: '48039'
year: '2023'
...
---
_id: '55760'
abstract:
- lang: eng
text: The transferability of structure–property relationships for laser-pretreated
metal adhesive joints to laser-pretreated metal–carbon-fiber-reinforced plastic
(CFRP) bonds was investigated. Single-lap shear tests were performed on hybrid
AW 6082-T6–CFRP specimens pretreated with the same pulsed laser surface parameter
sets on the metal surface as previously tested, AW 6082-T6–E320 metal adhesive
joints. The fracture surfaces were characterized to determine the type of failure
and elucidate differences and commonalities in the link between surface structures
and single-lap shear strengths. Digital image analyses of the hybrid specimens’
fractured surfaces were used to quantify remaining CFRP fragments on the metallic
joint side. The results indicate that high surface enlargements and the presence
of undercut structures lead to single-lap shear strengths exceeding 40 MPa and
35 MPa for unaged and aged hybrid specimens, respectively. Whereas for the metal–polymer
joints, the trend from high strength to weakly bonded specimens is largely continuous
with the degree of surface structuring, hybrid metal–CFRP joints exhibit a drastic
drop in joint performance after aging if the laser-generated surface structures
are less pronounced with low surface enlargements and crater depths. Surface features
and hydrothermal aging determine whether the specimens fail cohesively or adhesively.
article_number: '427'
article_type: original
author:
- first_name: Jonathan
full_name: Freund, Jonathan
last_name: Freund
- first_name: Isabel
full_name: Lützenkirchen, Isabel
last_name: Lützenkirchen
- first_name: Miriam
full_name: Löbbecke, Miriam
last_name: Löbbecke
- first_name: Alexander
full_name: Delp, Alexander
last_name: Delp
- first_name: Frank
full_name: Walther, Frank
last_name: Walther
- first_name: Shuang
full_name: Wu, Shuang
id: '48039'
last_name: Wu
orcid: 0000-0001-8645-9952
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
- first_name: Jan
full_name: Haubrich, Jan
last_name: Haubrich
citation:
ama: Freund J, Lützenkirchen I, Löbbecke M, et al. Transferability of the Structure–Property
Relationships from Laser-Pretreated Metal–Polymer Joints to Aluminum–CFRP Hybrid
Joints. Journal of Composites Science. 2023;7(10). doi:10.3390/jcs7100427
apa: Freund, J., Lützenkirchen, I., Löbbecke, M., Delp, A., Walther, F., Wu, S.,
Tröster, T., & Haubrich, J. (2023). Transferability of the Structure–Property
Relationships from Laser-Pretreated Metal–Polymer Joints to Aluminum–CFRP Hybrid
Joints. Journal of Composites Science, 7(10), Article 427. https://doi.org/10.3390/jcs7100427
bibtex: '@article{Freund_Lützenkirchen_Löbbecke_Delp_Walther_Wu_Tröster_Haubrich_2023,
title={Transferability of the Structure–Property Relationships from Laser-Pretreated
Metal–Polymer Joints to Aluminum–CFRP Hybrid Joints}, volume={7}, DOI={10.3390/jcs7100427},
number={10427}, journal={Journal of Composites Science}, publisher={MDPI AG},
author={Freund, Jonathan and Lützenkirchen, Isabel and Löbbecke, Miriam and Delp,
Alexander and Walther, Frank and Wu, Shuang and Tröster, Thomas and Haubrich,
Jan}, year={2023} }'
chicago: Freund, Jonathan, Isabel Lützenkirchen, Miriam Löbbecke, Alexander Delp,
Frank Walther, Shuang Wu, Thomas Tröster, and Jan Haubrich. “Transferability of
the Structure–Property Relationships from Laser-Pretreated Metal–Polymer Joints
to Aluminum–CFRP Hybrid Joints.” Journal of Composites Science 7, no. 10
(2023). https://doi.org/10.3390/jcs7100427.
ieee: 'J. Freund et al., “Transferability of the Structure–Property Relationships
from Laser-Pretreated Metal–Polymer Joints to Aluminum–CFRP Hybrid Joints,” Journal
of Composites Science, vol. 7, no. 10, Art. no. 427, 2023, doi: 10.3390/jcs7100427.'
mla: Freund, Jonathan, et al. “Transferability of the Structure–Property Relationships
from Laser-Pretreated Metal–Polymer Joints to Aluminum–CFRP Hybrid Joints.” Journal
of Composites Science, vol. 7, no. 10, 427, MDPI AG, 2023, doi:10.3390/jcs7100427.
short: J. Freund, I. Lützenkirchen, M. Löbbecke, A. Delp, F. Walther, S. Wu, T.
Tröster, J. Haubrich, Journal of Composites Science 7 (2023).
date_created: 2024-08-26T10:45:05Z
date_updated: 2025-01-30T12:31:55Z
department:
- _id: '321'
- _id: '149'
- _id: '9'
doi: 10.3390/jcs7100427
intvolume: ' 7'
issue: '10'
language:
- iso: eng
publication: Journal of Composites Science
publication_identifier:
issn:
- 2504-477X
publication_status: published
publisher: MDPI AG
quality_controlled: '1'
status: public
title: Transferability of the Structure–Property Relationships from Laser-Pretreated
Metal–Polymer Joints to Aluminum–CFRP Hybrid Joints
type: journal_article
user_id: '48039'
volume: 7
year: '2023'
...
---
_id: '46495'
abstract:
- lang: eng
text: A parameter investigation for manufacturing a hybrid system through the prepreg
pressing process was carried out within the scope of this work to achieve optimal
adhesion properties. The hybrid specimen comprises an aluminium sheet of alloy
EN AW 6082 in T6 condition and a thermoset Carbon Fibre Reinforced Plastics prepreg.
The prepreg pressing process allows the curing reaction of epoxy resin and the
joining process to occur simultaneously to avoid an additional bonding process
step. The surface of the aluminium sheet was pretreated in advance using a pulsed
Nd:YAG laser to enhance the bonding properties. In the first step, the shear edge
tests investigated the adhesion properties achieved with different consolidation
(temperature, time and pressure) and laser parameters. Then, 3-point bending tests
were carried out to investigate the influence of the consolidation parameters
on the mechanical properties of the Carbon Fibre Reinforced Plastics-laminate.
In this way, the optimal parameter sets for manufacturing hybrid structures were
determined.
article_type: original
author:
- first_name: Shuang
full_name: Wu, Shuang
id: '48039'
last_name: Wu
orcid: 0000-0001-8645-9952
- first_name: Alexander
full_name: Delp, Alexander
last_name: Delp
- first_name: Jonathan
full_name: Freund, Jonathan
last_name: Freund
- first_name: Frank
full_name: Walther, Frank
last_name: Walther
- first_name: Jan
full_name: Haubrich, Jan
last_name: Haubrich
- first_name: Miriam
full_name: Löbbecke, Miriam
last_name: Löbbecke
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: Wu S, Delp A, Freund J, et al. Adhesion properties of the hybrid system made
of laser-structured aluminium EN AW 6082 and CFRP by co-bonding-pressing process.
The Journal of Adhesion. Published online 2023:1-29. doi:10.1080/00218464.2023.2245758
apa: Wu, S., Delp, A., Freund, J., Walther, F., Haubrich, J., Löbbecke, M., &
Tröster, T. (2023). Adhesion properties of the hybrid system made of laser-structured
aluminium EN AW 6082 and CFRP by co-bonding-pressing process. The Journal of
Adhesion, 1–29. https://doi.org/10.1080/00218464.2023.2245758
bibtex: '@article{Wu_Delp_Freund_Walther_Haubrich_Löbbecke_Tröster_2023, title={Adhesion
properties of the hybrid system made of laser-structured aluminium EN AW 6082
and CFRP by co-bonding-pressing process}, DOI={10.1080/00218464.2023.2245758},
journal={The Journal of Adhesion}, publisher={Informa UK Limited}, author={Wu,
Shuang and Delp, Alexander and Freund, Jonathan and Walther, Frank and Haubrich,
Jan and Löbbecke, Miriam and Tröster, Thomas}, year={2023}, pages={1–29} }'
chicago: Wu, Shuang, Alexander Delp, Jonathan Freund, Frank Walther, Jan Haubrich,
Miriam Löbbecke, and Thomas Tröster. “Adhesion Properties of the Hybrid System
Made of Laser-Structured Aluminium EN AW 6082 and CFRP by Co-Bonding-Pressing
Process.” The Journal of Adhesion, 2023, 1–29. https://doi.org/10.1080/00218464.2023.2245758.
ieee: 'S. Wu et al., “Adhesion properties of the hybrid system made of laser-structured
aluminium EN AW 6082 and CFRP by co-bonding-pressing process,” The Journal
of Adhesion, pp. 1–29, 2023, doi: 10.1080/00218464.2023.2245758.'
mla: Wu, Shuang, et al. “Adhesion Properties of the Hybrid System Made of Laser-Structured
Aluminium EN AW 6082 and CFRP by Co-Bonding-Pressing Process.” The Journal
of Adhesion, Informa UK Limited, 2023, pp. 1–29, doi:10.1080/00218464.2023.2245758.
short: S. Wu, A. Delp, J. Freund, F. Walther, J. Haubrich, M. Löbbecke, T. Tröster,
The Journal of Adhesion (2023) 1–29.
date_created: 2023-08-15T10:26:00Z
date_updated: 2025-01-30T12:33:42Z
department:
- _id: '321'
- _id: '149'
- _id: '9'
doi: 10.1080/00218464.2023.2245758
keyword:
- Materials Chemistry
- Surfaces
- Coatings and Films
- Surfaces and Interfaces
- Mechanics of Materials
- General Chemistry
language:
- iso: eng
page: 1-29
publication: The Journal of Adhesion
publication_identifier:
issn:
- 0021-8464
- 1545-5823
publication_status: published
publisher: Informa UK Limited
quality_controlled: '1'
status: public
title: Adhesion properties of the hybrid system made of laser-structured aluminium
EN AW 6082 and CFRP by co-bonding-pressing process
type: journal_article
user_id: '48039'
year: '2023'
...
---
_id: '48597'
abstract:
- lang: eng
text: This paper introduces an intrinsic manufacturing process of a hat profile
made of laser-pretreated aluminium sheet of alloy EN AW-6082 in T6 condition and
carbon fibre-reinforced plastic (CFRP) prepreg. The resin system used in combination
with CFRP was epoxy resin (EP). Before manufacturing, the laser-pretreated aluminium
sheet and CFRP prepreg were stacked to form a multi-layer composite, which was
pressed simultaneously in one process step. The optimal CFRP layer structure was
calculated in advance using the finite element method. During the forming process,
the curing reaction and the joining of the aluminium sheet and CFRP prepreg will
take place simultaneously. Thus, further joining techniques such as bonding and
riveting could be saved, and a much more efficient process could be achieved.
After manufacturing, shear-edge test was used to characterize the adhesion properties
of the hybrid part.
author:
- first_name: Shuang
full_name: Wu, Shuang
id: '48039'
last_name: Wu
orcid: 0000-0001-8645-9952
- first_name: Jonathan
full_name: Freund, Jonathan
last_name: Freund
- first_name: Alexander
full_name: Delp, Alexander
last_name: Delp
- first_name: Jan
full_name: Haubrich, Jan
last_name: Haubrich
- first_name: Miriam
full_name: Löbbecke, Miriam
last_name: Löbbecke
- first_name: Frank
full_name: Walther, Frank
last_name: Walther
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: 'Wu S, Freund J, Delp A, et al. Intrinsic forming of hybrid parts made of laser-structured
aluminium sheet and CFRP-Prepreg. In: ; 2023.'
apa: Wu, S., Freund, J., Delp, A., Haubrich, J., Löbbecke, M., Walther, F., &
Tröster, T. (2023). Intrinsic forming of hybrid parts made of laser-structured
aluminium sheet and CFRP-Prepreg. 23rd International Conference on Composite
Materials (ICCM23 2023).
bibtex: '@inproceedings{Wu_Freund_Delp_Haubrich_Löbbecke_Walther_Tröster_2023, title={Intrinsic
forming of hybrid parts made of laser-structured aluminium sheet and CFRP-Prepreg},
author={Wu, Shuang and Freund, Jonathan and Delp, Alexander and Haubrich, Jan
and Löbbecke, Miriam and Walther, Frank and Tröster, Thomas}, year={2023} }'
chicago: Wu, Shuang, Jonathan Freund, Alexander Delp, Jan Haubrich, Miriam Löbbecke,
Frank Walther, and Thomas Tröster. “Intrinsic Forming of Hybrid Parts Made of
Laser-Structured Aluminium Sheet and CFRP-Prepreg,” 2023.
ieee: S. Wu et al., “Intrinsic forming of hybrid parts made of laser-structured
aluminium sheet and CFRP-Prepreg,” presented at the 23rd International Conference
on Composite Materials (ICCM23 2023), 2023.
mla: Wu, Shuang, et al. Intrinsic Forming of Hybrid Parts Made of Laser-Structured
Aluminium Sheet and CFRP-Prepreg. 2023.
short: 'S. Wu, J. Freund, A. Delp, J. Haubrich, M. Löbbecke, F. Walther, T. Tröster,
in: 2023.'
conference:
end_date: 2023-08-04
name: 23rd International Conference on Composite Materials (ICCM23 2023)
start_date: 2023-07-31
date_created: 2023-11-02T11:37:32Z
date_updated: 2025-01-30T12:37:39Z
department:
- _id: '321'
- _id: '149'
- _id: '9'
language:
- iso: eng
popular_science: '1'
status: public
title: Intrinsic forming of hybrid parts made of laser-structured aluminium sheet
and CFRP-Prepreg
type: conference
user_id: '48039'
year: '2023'
...
---
_id: '48583'
author:
- first_name: Johannes
full_name: Süßmann, Johannes
id: '16220'
last_name: Süßmann
orcid: 0000-0001-5716-0863
citation:
ama: 'Süßmann J. When Did Europe Become Identified With Christianity? The Revolutionary
Origins of an All Too Common Slogan. In: Ralston J, Stosch K von, eds. Beyond
Binaries. Religious Diversity in Europe. Vol 37. Beiträge zur Komparativen
Theologie. Brill | Schöningh; 2023:19–30. doi:10.30965/9783657791552_003'
apa: Süßmann, J. (2023). When Did Europe Become Identified With Christianity? The
Revolutionary Origins of an All Too Common Slogan. In J. Ralston & K. von
Stosch (Eds.), Beyond Binaries. Religious Diversity in Europe (Vol. 37,
pp. 19–30). Brill | Schöningh. https://doi.org/10.30965/9783657791552_003
bibtex: '@inbook{Süßmann_2023, place={Paderborn}, series={Beiträge zur Komparativen
Theologie}, title={When Did Europe Become Identified With Christianity? The Revolutionary
Origins of an All Too Common Slogan}, volume={37}, DOI={10.30965/9783657791552_003},
booktitle={Beyond Binaries. Religious Diversity in Europe}, publisher={Brill |
Schöningh}, author={Süßmann, Johannes}, editor={Ralston, Joshua and Stosch, Klaus
von}, year={2023}, pages={19–30}, collection={Beiträge zur Komparativen Theologie}
}'
chicago: 'Süßmann, Johannes. “When Did Europe Become Identified With Christianity?
The Revolutionary Origins of an All Too Common Slogan.” In Beyond Binaries.
Religious Diversity in Europe, edited by Joshua Ralston and Klaus von Stosch,
37:19–30. Beiträge Zur Komparativen Theologie. Paderborn: Brill | Schöningh, 2023.
https://doi.org/10.30965/9783657791552_003.'
ieee: 'J. Süßmann, “When Did Europe Become Identified With Christianity? The Revolutionary
Origins of an All Too Common Slogan,” in Beyond Binaries. Religious Diversity
in Europe, vol. 37, J. Ralston and K. von Stosch, Eds. Paderborn: Brill |
Schöningh, 2023, pp. 19–30.'
mla: Süßmann, Johannes. “When Did Europe Become Identified With Christianity? The
Revolutionary Origins of an All Too Common Slogan.” Beyond Binaries. Religious
Diversity in Europe, edited by Joshua Ralston and Klaus von Stosch, vol. 37,
Brill | Schöningh, 2023, pp. 19–30, doi:10.30965/9783657791552_003.
short: 'J. Süßmann, in: J. Ralston, K. von Stosch (Eds.), Beyond Binaries. Religious
Diversity in Europe, Brill | Schöningh, Paderborn, 2023, pp. 19–30.'
date_created: 2023-11-01T14:43:41Z
date_updated: 2025-04-24T16:28:03Z
department:
- _id: '446'
- _id: '550'
doi: 10.30965/9783657791552_003
editor:
- first_name: Joshua
full_name: Ralston, Joshua
last_name: Ralston
- first_name: Klaus von
full_name: Stosch, Klaus von
last_name: Stosch
intvolume: ' 37'
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://doi.org/10.30965/9783657791552_003
oa: '1'
page: 19–30
place: Paderborn
publication: Beyond Binaries. Religious Diversity in Europe
publication_identifier:
isbn:
- 978-3-506-79155-9
- '3-506-79155-9 '
publication_status: published
publisher: Brill | Schöningh
quality_controlled: '1'
series_title: Beiträge zur Komparativen Theologie
status: public
title: When Did Europe Become Identified With Christianity? The Revolutionary Origins
of an All Too Common Slogan
type: book_chapter
user_id: '16220'
volume: 37
year: '2023'
...
---
_id: '49436'
author:
- first_name: Maximilian Alexander
full_name: Kaiser, Maximilian Alexander
id: '72351'
last_name: Kaiser
orcid: 0009-0008-1333-3396
- first_name: Alexander
full_name: Reitz, Alexander
last_name: Reitz
- first_name: Stefan
full_name: Konrad, Stefan
last_name: Konrad
- first_name: Thomas
full_name: Meyer, Thomas
last_name: Meyer
- first_name: Thorsten
full_name: Marten, Thorsten
id: '338'
last_name: Marten
orcid: 0009-0001-6433-7839
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: 'Kaiser MA, Reitz A, Konrad S, Meyer T, Marten T, Tröster T. Untersuchung energieeffizienter
und serientauglicher Erwärmungsstrategien mittels resistiver Erwärmung für den
Presshärteprozess. In: Merklein M, ed. Workshop Warmblechumformung. Vol
18. Warmumformung von höchstfesten Vergütungsstählen: Tagungsband zum 18. Erlanger
Workshop Warmblechumformung. Lehrstuhl für Fertigungstechnologie; 2023:99-118.'
apa: Kaiser, M. A., Reitz, A., Konrad, S., Meyer, T., Marten, T., & Tröster,
T. (2023). Untersuchung energieeffizienter und serientauglicher Erwärmungsstrategien
mittels resistiver Erwärmung für den Presshärteprozess. In M. Merklein (Ed.),
Workshop Warmblechumformung (Vol. 18, pp. 99–118). Lehrstuhl für Fertigungstechnologie.
bibtex: '@inproceedings{Kaiser_Reitz_Konrad_Meyer_Marten_Tröster_2023, place={Erlangen},
series={Warmumformung von höchstfesten Vergütungsstählen: Tagungsband zum 18.
Erlanger Workshop Warmblechumformung}, title={Untersuchung energieeffizienter
und serientauglicher Erwärmungsstrategien mittels resistiver Erwärmung für den
Presshärteprozess}, volume={18}, booktitle={Workshop Warmblechumformung}, publisher={Lehrstuhl
für Fertigungstechnologie}, author={Kaiser, Maximilian Alexander and Reitz, Alexander
and Konrad, Stefan and Meyer, Thomas and Marten, Thorsten and Tröster, Thomas},
editor={Merklein, Marion}, year={2023}, pages={99–118}, collection={Warmumformung
von höchstfesten Vergütungsstählen: Tagungsband zum 18. Erlanger Workshop Warmblechumformung}
}'
chicago: 'Kaiser, Maximilian Alexander, Alexander Reitz, Stefan Konrad, Thomas Meyer,
Thorsten Marten, and Thomas Tröster. “Untersuchung energieeffizienter und serientauglicher
Erwärmungsstrategien mittels resistiver Erwärmung für den Presshärteprozess.”
In Workshop Warmblechumformung, edited by Marion Merklein, 18:99–118. Warmumformung
von höchstfesten Vergütungsstählen: Tagungsband zum 18. Erlanger Workshop Warmblechumformung.
Erlangen: Lehrstuhl für Fertigungstechnologie, 2023.'
ieee: M. A. Kaiser, A. Reitz, S. Konrad, T. Meyer, T. Marten, and T. Tröster, “Untersuchung
energieeffizienter und serientauglicher Erwärmungsstrategien mittels resistiver
Erwärmung für den Presshärteprozess,” in Workshop Warmblechumformung, Fürth,
2023, vol. 18, pp. 99–118.
mla: Kaiser, Maximilian Alexander, et al. “Untersuchung energieeffizienter und serientauglicher
Erwärmungsstrategien mittels resistiver Erwärmung für den Presshärteprozess.”
Workshop Warmblechumformung, edited by Marion Merklein, vol. 18, Lehrstuhl
für Fertigungstechnologie, 2023, pp. 99–118.
short: 'M.A. Kaiser, A. Reitz, S. Konrad, T. Meyer, T. Marten, T. Tröster, in: M.
Merklein (Ed.), Workshop Warmblechumformung, Lehrstuhl für Fertigungstechnologie,
Erlangen, 2023, pp. 99–118.'
conference:
end_date: 2023-11-14
location: Fürth
name: 18. Erlanger Workshop Warmblechumformung
start_date: 2023-11-14
date_created: 2023-12-04T11:05:31Z
date_updated: 2025-05-13T09:20:20Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
editor:
- first_name: Marion
full_name: Merklein, Marion
last_name: Merklein
intvolume: ' 18'
keyword:
- Presshärten
- resistive Schnellerwärmung
- Energieeffizienz
language:
- iso: ger
page: 99-118
place: Erlangen
publication: Workshop Warmblechumformung
publication_identifier:
isbn:
- 978-3-00-077160-6
publication_status: published
publisher: Lehrstuhl für Fertigungstechnologie
series_title: 'Warmumformung von höchstfesten Vergütungsstählen: Tagungsband zum 18.
Erlanger Workshop Warmblechumformung'
status: public
title: Untersuchung energieeffizienter und serientauglicher Erwärmungsstrategien mittels
resistiver Erwärmung für den Presshärteprozess
type: conference_abstract
user_id: '72351'
volume: 18
year: '2023'
...
---
_id: '46560'
author:
- first_name: Stefanie
full_name: Vochatzer, Stefanie
id: '95153'
last_name: Vochatzer
citation:
ama: 'Vochatzer S. Connection and Community. In: Bentz J, Leibniz Insitute for
Educational Media , Georg Eckert Institute, eds. Creative Approaches to Climate
and Peace Education. An Educationr’s Guide to Using Storytelling and Art.
Leibniz Insitute for Educational Media, Georg Eckert Institute; 2023:48.'
apa: Vochatzer, S. (2023). Connection and Community. In J. Bentz , Leibniz Insitute
for Educational Media , & Georg Eckert Institute (Eds.), Creative Approaches
to Climate and Peace Education. An Educationr’s Guide to Using Storytelling and
Art (p. 48). Leibniz Insitute for Educational Media, Georg Eckert Institute.
bibtex: '@inbook{Vochatzer_2023, place={Braunschweig}, title={Connection and Community},
booktitle={Creative Approaches to Climate and Peace Education. An Educationr’s
Guide to Using Storytelling and Art}, publisher={Leibniz Insitute for Educational
Media, Georg Eckert Institute}, author={Vochatzer, Stefanie}, editor={Bentz ,
Julia and Leibniz Insitute for Educational Media and Georg Eckert Institute},
year={2023}, pages={48} }'
chicago: 'Vochatzer, Stefanie. “Connection and Community.” In Creative Approaches
to Climate and Peace Education. An Educationr’s Guide to Using Storytelling and
Art, edited by Julia Bentz , Leibniz Insitute for Educational Media , and
Georg Eckert Institute, 48. Braunschweig: Leibniz Insitute for Educational Media,
Georg Eckert Institute, 2023.'
ieee: 'S. Vochatzer, “Connection and Community,” in Creative Approaches to Climate
and Peace Education. An Educationr’s Guide to Using Storytelling and Art,
J. Bentz , Leibniz Insitute for Educational Media , and Georg Eckert Institute,
Eds. Braunschweig: Leibniz Insitute for Educational Media, Georg Eckert Institute,
2023, p. 48.'
mla: Vochatzer, Stefanie. “Connection and Community.” Creative Approaches to
Climate and Peace Education. An Educationr’s Guide to Using Storytelling and Art,
edited by Julia Bentz et al., Leibniz Insitute for Educational Media, Georg
Eckert Institute, 2023, p. 48.
short: 'S. Vochatzer, in: J. Bentz , Leibniz Insitute for Educational Media , Georg
Eckert Institute (Eds.), Creative Approaches to Climate and Peace Education. An
Educationr’s Guide to Using Storytelling and Art, Leibniz Insitute for Educational
Media, Georg Eckert Institute, Braunschweig, 2023, p. 48.'
corporate_editor:
- 'Leibniz Insitute for Educational Media '
- Georg Eckert Institute
date_created: 2023-08-17T09:23:08Z
date_updated: 2025-05-25T12:39:38Z
department:
- _id: '723'
- _id: '724'
- _id: '36'
editor:
- first_name: 'Julia '
full_name: 'Bentz , Julia '
last_name: 'Bentz '
language:
- iso: eng
page: '48'
place: Braunschweig
publication: Creative Approaches to Climate and Peace Education. An Educationr’s Guide
to Using Storytelling and Art
publication_identifier:
unknown:
- 'ISBN: 978-3-88304-000-4'
publication_status: published
publisher: Leibniz Insitute for Educational Media, Georg Eckert Institute
status: public
title: Connection and Community
type: book_chapter
user_id: '95153'
year: '2023'
...
---
_id: '51190'
abstract:
- lang: eng
text: Abstract. Force-displacement measurements and macrosections are commonly
used methods to validate numerical models of clinching processes. However, these
ex-situ methods often lead to springback of elastic deformations and crack-closing
after unloading. In contrast, the in-situ computed tomography (CT) can provide
three-dimensional images of the clinching point under loading conditions. So far,
the quantity of elastic springback that causes measuring deviations between in-
and ex-situ measurements is not determined. In this paper, a method is described
to quantitatively compare the results of in-situ CT, ex-situ CT and CT scans of
cut specimens, which are prepared for macrosectioning, among each other. The method
is applied to a single-lap shear test of two clinched aluminum sheets. Here, the
test is conducted to specific process steps, then the specimen is CT scanned in-situ
(during loading) and ex-situ (after unloading). Subsequently, the specimens are
cut for macrosectioning and CT scanned. Finally, the outer contours and the interfaces
of cross section images are determined by digital image analysis and the deviations
over the clinching point between ex- and in-situ methods are calculated.
author:
- first_name: Daniel
full_name: Köhler, Daniel
last_name: Köhler
- first_name: Robert
full_name: Kupfer, Robert
last_name: Kupfer
- first_name: Juliane
full_name: Troschitz, Juliane
last_name: Troschitz
- first_name: Maik
full_name: Gude, Maik
last_name: Gude
citation:
ama: 'Köhler D, Kupfer R, Troschitz J, Gude M. Comparison of ex- and in-situ investigations
of clinched single-lap shear specimens. In: Materials Research Proceedings.
Materials Research Forum LLC; 2023. doi:10.21741/9781644902417-20'
apa: Köhler, D., Kupfer, R., Troschitz, J., & Gude, M. (2023). Comparison of
ex- and in-situ investigations of clinched single-lap shear specimens. Materials
Research Proceedings. https://doi.org/10.21741/9781644902417-20
bibtex: '@inproceedings{Köhler_Kupfer_Troschitz_Gude_2023, title={Comparison of
ex- and in-situ investigations of clinched single-lap shear specimens}, DOI={10.21741/9781644902417-20},
booktitle={Materials Research Proceedings}, publisher={Materials Research Forum
LLC}, author={Köhler, Daniel and Kupfer, Robert and Troschitz, Juliane and Gude,
Maik}, year={2023} }'
chicago: Köhler, Daniel, Robert Kupfer, Juliane Troschitz, and Maik Gude. “Comparison
of Ex- and in-Situ Investigations of Clinched Single-Lap Shear Specimens.” In
Materials Research Proceedings. Materials Research Forum LLC, 2023. https://doi.org/10.21741/9781644902417-20.
ieee: 'D. Köhler, R. Kupfer, J. Troschitz, and M. Gude, “Comparison of ex- and in-situ
investigations of clinched single-lap shear specimens,” 2023, doi: 10.21741/9781644902417-20.'
mla: Köhler, Daniel, et al. “Comparison of Ex- and in-Situ Investigations of Clinched
Single-Lap Shear Specimens.” Materials Research Proceedings, Materials
Research Forum LLC, 2023, doi:10.21741/9781644902417-20.
short: 'D. Köhler, R. Kupfer, J. Troschitz, M. Gude, in: Materials Research Proceedings,
Materials Research Forum LLC, 2023.'
date_created: 2024-02-06T14:48:44Z
date_updated: 2025-06-02T20:18:56Z
department:
- _id: '157'
- _id: '43'
doi: 10.21741/9781644902417-20
language:
- iso: eng
project:
- _id: '130'
grant_number: '418701707'
name: 'TRR 285: TRR 285'
- _id: '133'
name: 'TRR 285 - C: TRR 285 - Project Area C'
- _id: '148'
name: 'TRR 285 – C04: TRR 285 - Subproject C04'
publication: Materials Research Proceedings
publication_identifier:
issn:
- 2474-395X
publication_status: published
publisher: Materials Research Forum LLC
status: public
title: Comparison of ex- and in-situ investigations of clinched single-lap shear specimens
type: conference
user_id: '83408'
year: '2023'
...
---
_id: '51194'
author:
- first_name: Daniel
full_name: Köhler, Daniel
last_name: Köhler
- first_name: Richard
full_name: Stephan, Richard
last_name: Stephan
- first_name: Robert
full_name: Kupfer, Robert
last_name: Kupfer
- first_name: Juliane
full_name: Troschitz, Juliane
last_name: Troschitz
- first_name: Alexander
full_name: Brosius, Alexander
last_name: Brosius
- first_name: Maik
full_name: Gude, Maik
last_name: Gude
citation:
ama: 'Köhler D, Stephan R, Kupfer R, Troschitz J, Brosius A, Gude M. In-situ Computed
Tomography and Transient Dynamic Analysis of a Single-Lap Shear Test with a Composite-Metal
Clinch Point. In: Lecture Notes in Production Engineering. Springer International
Publishing; 2023. doi:10.1007/978-3-031-18318-8_28'
apa: Köhler, D., Stephan, R., Kupfer, R., Troschitz, J., Brosius, A., & Gude,
M. (2023). In-situ Computed Tomography and Transient Dynamic Analysis of a Single-Lap
Shear Test with a Composite-Metal Clinch Point. In Lecture Notes in Production
Engineering. Springer International Publishing. https://doi.org/10.1007/978-3-031-18318-8_28
bibtex: '@inbook{Köhler_Stephan_Kupfer_Troschitz_Brosius_Gude_2023, place={Cham},
title={In-situ Computed Tomography and Transient Dynamic Analysis of a Single-Lap
Shear Test with a Composite-Metal Clinch Point}, DOI={10.1007/978-3-031-18318-8_28},
booktitle={Lecture Notes in Production Engineering}, publisher={Springer International
Publishing}, author={Köhler, Daniel and Stephan, Richard and Kupfer, Robert and
Troschitz, Juliane and Brosius, Alexander and Gude, Maik}, year={2023} }'
chicago: 'Köhler, Daniel, Richard Stephan, Robert Kupfer, Juliane Troschitz, Alexander
Brosius, and Maik Gude. “In-Situ Computed Tomography and Transient Dynamic Analysis
of a Single-Lap Shear Test with a Composite-Metal Clinch Point.” In Lecture
Notes in Production Engineering. Cham: Springer International Publishing,
2023. https://doi.org/10.1007/978-3-031-18318-8_28.'
ieee: 'D. Köhler, R. Stephan, R. Kupfer, J. Troschitz, A. Brosius, and M. Gude,
“In-situ Computed Tomography and Transient Dynamic Analysis of a Single-Lap Shear
Test with a Composite-Metal Clinch Point,” in Lecture Notes in Production Engineering,
Cham: Springer International Publishing, 2023.'
mla: Köhler, Daniel, et al. “In-Situ Computed Tomography and Transient Dynamic Analysis
of a Single-Lap Shear Test with a Composite-Metal Clinch Point.” Lecture Notes
in Production Engineering, Springer International Publishing, 2023, doi:10.1007/978-3-031-18318-8_28.
short: 'D. Köhler, R. Stephan, R. Kupfer, J. Troschitz, A. Brosius, M. Gude, in:
Lecture Notes in Production Engineering, Springer International Publishing, Cham,
2023.'
date_created: 2024-02-06T15:03:03Z
date_updated: 2025-06-02T20:19:17Z
department:
- _id: '157'
- _id: '43'
doi: 10.1007/978-3-031-18318-8_28
language:
- iso: eng
place: Cham
project:
- _id: '130'
grant_number: '418701707'
name: 'TRR 285: TRR 285'
- _id: '133'
name: 'TRR 285 - C: TRR 285 - Project Area C'
- _id: '148'
name: 'TRR 285 – C04: TRR 285 - Subproject C04'
publication: Lecture Notes in Production Engineering
publication_identifier:
isbn:
- '9783031183171'
- '9783031183188'
issn:
- 2194-0525
- 2194-0533
publication_status: published
publisher: Springer International Publishing
status: public
title: In-situ Computed Tomography and Transient Dynamic Analysis of a Single-Lap
Shear Test with a Composite-Metal Clinch Point
type: book_chapter
user_id: '83408'
year: '2023'
...
---
_id: '48642'
author:
- first_name: Emine Fulya
full_name: Akbulut Irmak, Emine Fulya
id: '72008'
last_name: Akbulut Irmak
orcid: 0000-0002-1338-810X
- first_name: Hendrik
full_name: Hanses, Hendrik
id: '64527'
last_name: Hanses
- first_name: Ilona
full_name: Horwath, Ilona
id: '68836'
last_name: Horwath
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: 'Akbulut Irmak EF, Hanses H, Horwath I, Tröster T. Case Study III: Challenges
of lightweight design, vehicles, and rescuers. In: Horwath I, Schweizer S, eds.
Climate Protection, Resource Efficiency, and Sustainable Engineering. transcript
Verlag; 2023. doi:10.14361/9783839463772-006'
apa: 'Akbulut Irmak, E. F., Hanses, H., Horwath, I., & Tröster, T. (2023). Case
Study III: Challenges of lightweight design, vehicles, and rescuers. In I. Horwath
& S. Schweizer (Eds.), Climate Protection, Resource Efficiency, and Sustainable
Engineering. transcript Verlag. https://doi.org/10.14361/9783839463772-006'
bibtex: '@inbook{Akbulut Irmak_Hanses_Horwath_Tröster_2023, place={Bielefeld, Germany},
title={Case Study III: Challenges of lightweight design, vehicles, and rescuers},
DOI={10.14361/9783839463772-006},
booktitle={Climate Protection, Resource Efficiency, and Sustainable Engineering},
publisher={transcript Verlag}, author={Akbulut Irmak, Emine Fulya and Hanses,
Hendrik and Horwath, Ilona and Tröster, Thomas}, editor={Horwath, Ilona and Schweizer,
Swetlana}, year={2023} }'
chicago: 'Akbulut Irmak, Emine Fulya, Hendrik Hanses, Ilona Horwath, and Thomas
Tröster. “Case Study III: Challenges of Lightweight Design, Vehicles, and Rescuers.”
In Climate Protection, Resource Efficiency, and Sustainable Engineering,
edited by Ilona Horwath and Swetlana Schweizer. Bielefeld, Germany: transcript
Verlag, 2023. https://doi.org/10.14361/9783839463772-006.'
ieee: 'E. F. Akbulut Irmak, H. Hanses, I. Horwath, and T. Tröster, “Case Study III:
Challenges of lightweight design, vehicles, and rescuers,” in Climate Protection,
Resource Efficiency, and Sustainable Engineering, I. Horwath and S. Schweizer,
Eds. Bielefeld, Germany: transcript Verlag, 2023.'
mla: 'Akbulut Irmak, Emine Fulya, et al. “Case Study III: Challenges of Lightweight
Design, Vehicles, and Rescuers.” Climate Protection, Resource Efficiency, and
Sustainable Engineering, edited by Ilona Horwath and Swetlana Schweizer, transcript
Verlag, 2023, doi:10.14361/9783839463772-006.'
short: 'E.F. Akbulut Irmak, H. Hanses, I. Horwath, T. Tröster, in: I. Horwath, S.
Schweizer (Eds.), Climate Protection, Resource Efficiency, and Sustainable Engineering,
transcript Verlag, Bielefeld, Germany, 2023.'
date_created: 2023-11-07T11:04:03Z
date_updated: 2025-06-06T07:52:36Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
doi: 10.14361/9783839463772-006
editor:
- first_name: Ilona
full_name: Horwath, Ilona
last_name: Horwath
- first_name: Swetlana
full_name: Schweizer, Swetlana
last_name: Schweizer
language:
- iso: eng
place: Bielefeld, Germany
publication: Climate Protection, Resource Efficiency, and Sustainable Engineering
publication_identifier:
isbn:
- '9783837663778'
- '9783839463772'
issn:
- 2703-1543
- 2703-1551
publication_status: published
publisher: transcript Verlag
status: public
title: 'Case Study III: Challenges of lightweight design, vehicles, and rescuers'
type: book_chapter
user_id: '72008'
year: '2023'
...
---
_id: '47536'
abstract:
- lang: eng
text: AbstractEfforts to enhance sustainability
in all areas of life are increasing worldwide. In the field of manufacturing technology,
a wide variety of approaches are being used to improve both resource and energy
efficiency. Efficiency as well as sustainability can be improved by creating a
circular economy or through energy-efficient recycling processes. As part of the
interdisciplinary research group "Light—Efficient—Mobile" investigations on the
energy-efficient friction-induced recycling process have been carried out at the
department of Forming and Machining Technology at Paderborn University. E.g. using
the friction-induced recycling process, different formless solid aluminum materials
can be direct recycled into semi-finished products in an energy-efficient manner.
The results of investigations with regard to the influence of the geometrical
shape and filling rate of the aluminum particles to be recycled as well as the
rotational speed of the continuously rotating wheel are explained in this paper.
In addition to the recycling of aluminum chips, aluminum particles like powders
from the field of additive manufacturing are processed. Based on these results,
the future potentials of solid-state recycling processes and their contribution
to the circular economy are discussed. The main focus here is on future interdisciplinary
research projects to achieve circularity in the manufacturing of user-individual
semi-finished products as well as the possibility to selectively adjust the product
properties with the continuous recycling process.
article_number: '59'
article_type: original
author:
- first_name: Thomas
full_name: Borgert, Thomas
id: '83141'
last_name: Borgert
- first_name: Dennis
full_name: Milaege, Dennis
last_name: Milaege
- first_name: Swetlana
full_name: Schweizer, Swetlana
id: '8938'
last_name: Schweizer
- first_name: Werner
full_name: Homberg, Werner
id: '233'
last_name: Homberg
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: Borgert T, Milaege D, Schweizer S, Homberg W, Schaper M, Tröster T. Potentials
of a friction-induced recycling process to improve resource and energy efficiency
in manufacturing technology. International Journal of Material Forming.
2023;16(6). doi:10.1007/s12289-023-01785-w
apa: Borgert, T., Milaege, D., Schweizer, S., Homberg, W., Schaper, M., & Tröster,
T. (2023). Potentials of a friction-induced recycling process to improve resource
and energy efficiency in manufacturing technology. International Journal of
Material Forming, 16(6), Article 59. https://doi.org/10.1007/s12289-023-01785-w
bibtex: '@article{Borgert_Milaege_Schweizer_Homberg_Schaper_Tröster_2023, title={Potentials
of a friction-induced recycling process to improve resource and energy efficiency
in manufacturing technology}, volume={16}, DOI={10.1007/s12289-023-01785-w},
number={659}, journal={International Journal of Material Forming}, publisher={Springer
Science and Business Media LLC}, author={Borgert, Thomas and Milaege, Dennis and
Schweizer, Swetlana and Homberg, Werner and Schaper, Mirko and Tröster, Thomas},
year={2023} }'
chicago: Borgert, Thomas, Dennis Milaege, Swetlana Schweizer, Werner Homberg, Mirko
Schaper, and Thomas Tröster. “Potentials of a Friction-Induced Recycling Process
to Improve Resource and Energy Efficiency in Manufacturing Technology.” International
Journal of Material Forming 16, no. 6 (2023). https://doi.org/10.1007/s12289-023-01785-w.
ieee: 'T. Borgert, D. Milaege, S. Schweizer, W. Homberg, M. Schaper, and T. Tröster,
“Potentials of a friction-induced recycling process to improve resource and energy
efficiency in manufacturing technology,” International Journal of Material
Forming, vol. 16, no. 6, Art. no. 59, 2023, doi: 10.1007/s12289-023-01785-w.'
mla: Borgert, Thomas, et al. “Potentials of a Friction-Induced Recycling Process
to Improve Resource and Energy Efficiency in Manufacturing Technology.” International
Journal of Material Forming, vol. 16, no. 6, 59, Springer Science and Business
Media LLC, 2023, doi:10.1007/s12289-023-01785-w.
short: T. Borgert, D. Milaege, S. Schweizer, W. Homberg, M. Schaper, T. Tröster,
International Journal of Material Forming 16 (2023).
date_created: 2023-10-02T06:59:53Z
date_updated: 2025-06-06T08:18:51Z
department:
- _id: '156'
- _id: '149'
- _id: '321'
- _id: '9'
- _id: '158'
doi: 10.1007/s12289-023-01785-w
intvolume: ' 16'
issue: '6'
keyword:
- General Materials Science
language:
- iso: eng
publication: International Journal of Material Forming
publication_identifier:
issn:
- 1960-6206
- 1960-6214
publication_status: published
publisher: Springer Science and Business Media LLC
quality_controlled: '1'
status: public
title: Potentials of a friction-induced recycling process to improve resource and
energy efficiency in manufacturing technology
type: journal_article
user_id: '15952'
volume: 16
year: '2023'
...
---
_id: '46486'
author:
- first_name: Florian
full_name: Pfeifer, Florian
id: '22717'
last_name: Pfeifer
- first_name: Lukas
full_name: Knorr, Lukas
id: '90391'
last_name: Knorr
- first_name: Florian
full_name: Schlosser, Florian
id: '88614'
last_name: Schlosser
- first_name: Thorsten
full_name: Marten, Thorsten
id: '338'
last_name: Marten
orcid: 0009-0001-6433-7839
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: Pfeifer F, Knorr L, Schlosser F, Marten T, Tröster T. Ecological and Economic
Feasibility of Inductive Heating for Sustainable Press Hardening Processes. Journal
of Sustainable Development of Energy, Water and Environment Systems. 2023;11(3):1-20.
doi:10.13044/j.sdewes.d11.0450
apa: Pfeifer, F., Knorr, L., Schlosser, F., Marten, T., & Tröster, T. (2023).
Ecological and Economic Feasibility of Inductive Heating for Sustainable Press
Hardening Processes. Journal of Sustainable Development of Energy, Water and
Environment Systems, 11(3), 1–20. https://doi.org/10.13044/j.sdewes.d11.0450
bibtex: '@article{Pfeifer_Knorr_Schlosser_Marten_Tröster_2023, title={Ecological
and Economic Feasibility of Inductive Heating for Sustainable Press Hardening
Processes}, volume={11}, DOI={10.13044/j.sdewes.d11.0450},
number={3}, journal={Journal of Sustainable Development of Energy, Water and Environment
Systems}, publisher={SDEWES Centre}, author={Pfeifer, Florian and Knorr, Lukas
and Schlosser, Florian and Marten, Thorsten and Tröster, Thomas}, year={2023},
pages={1–20} }'
chicago: 'Pfeifer, Florian, Lukas Knorr, Florian Schlosser, Thorsten Marten, and
Thomas Tröster. “Ecological and Economic Feasibility of Inductive Heating for
Sustainable Press Hardening Processes.” Journal of Sustainable Development
of Energy, Water and Environment Systems 11, no. 3 (2023): 1–20. https://doi.org/10.13044/j.sdewes.d11.0450.'
ieee: 'F. Pfeifer, L. Knorr, F. Schlosser, T. Marten, and T. Tröster, “Ecological
and Economic Feasibility of Inductive Heating for Sustainable Press Hardening
Processes,” Journal of Sustainable Development of Energy, Water and Environment
Systems, vol. 11, no. 3, pp. 1–20, 2023, doi: 10.13044/j.sdewes.d11.0450.'
mla: Pfeifer, Florian, et al. “Ecological and Economic Feasibility of Inductive
Heating for Sustainable Press Hardening Processes.” Journal of Sustainable
Development of Energy, Water and Environment Systems, vol. 11, no. 3, SDEWES
Centre, 2023, pp. 1–20, doi:10.13044/j.sdewes.d11.0450.
short: F. Pfeifer, L. Knorr, F. Schlosser, T. Marten, T. Tröster, Journal of Sustainable
Development of Energy, Water and Environment Systems 11 (2023) 1–20.
date_created: 2023-08-14T15:25:01Z
date_updated: 2025-06-06T08:20:26Z
department:
- _id: '9'
- _id: '149'
- _id: '321'
doi: 10.13044/j.sdewes.d11.0450
intvolume: ' 11'
issue: '3'
keyword:
- Energy Engineering and Power Technology
- Water Science and Technology
- Environmental Science (miscellaneous)
- Renewable Energy
- Sustainability and the Environment
language:
- iso: eng
page: 1-20
publication: Journal of Sustainable Development of Energy, Water and Environment Systems
publication_identifier:
issn:
- 1848-9257
publication_status: published
publisher: SDEWES Centre
status: public
title: Ecological and Economic Feasibility of Inductive Heating for Sustainable Press
Hardening Processes
type: journal_article
user_id: '15952'
volume: 11
year: '2023'
...
---
_id: '34165'
author:
- first_name: Hendrik
full_name: Hanses, Hendrik
id: '64527'
last_name: Hanses
- first_name: Emine Fulya
full_name: Akbulut Irmak, Emine Fulya
id: '72008'
last_name: Akbulut Irmak
orcid: 0000-0002-1338-810X
- first_name: Ilona
full_name: Horwath, Ilona
id: '68836'
last_name: Horwath
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: 'Hanses H, Akbulut Irmak EF, Horwath I, Tröster T. Challenges of lightweight
design, vehicles, and rescuers. In: Horwath I, Schweizer S, eds. Climate Protection,
Resource Efficiency, and Sustainable Engineering. Transdisciplinary Approaches
to Design and Manufacturing Technology. 1st ed. transcript Verlag.'
apa: Hanses, H., Akbulut Irmak, E. F., Horwath, I., & Tröster, T. (n.d.). Challenges
of lightweight design, vehicles, and rescuers. In I. Horwath & S. Schweizer
(Eds.), Climate Protection, Resource Efficiency, and Sustainable Engineering.
Transdisciplinary Approaches to Design and Manufacturing Technology (1st ed.).
transcript Verlag.
bibtex: '@inbook{Hanses_Akbulut Irmak_Horwath_Tröster, place={Bielefeld}, edition={1},
title={Challenges of lightweight design, vehicles, and rescuers}, booktitle={
Climate Protection, Resource Efficiency, and Sustainable Engineering. Transdisciplinary
Approaches to Design and Manufacturing Technology}, publisher={transcript Verlag},
author={Hanses, Hendrik and Akbulut Irmak, Emine Fulya and Horwath, Ilona and
Tröster, Thomas}, editor={Horwath, Ilona and Schweizer, Swetlana} }'
chicago: 'Hanses, Hendrik, Emine Fulya Akbulut Irmak, Ilona Horwath, and Thomas
Tröster. “Challenges of Lightweight Design, Vehicles, and Rescuers.” In Climate
Protection, Resource Efficiency, and Sustainable Engineering. Transdisciplinary
Approaches to Design and Manufacturing Technology, edited by Ilona Horwath
and Swetlana Schweizer, 1st ed. Bielefeld: transcript Verlag, n.d.'
ieee: 'H. Hanses, E. F. Akbulut Irmak, I. Horwath, and T. Tröster, “Challenges of
lightweight design, vehicles, and rescuers,” in Climate Protection, Resource
Efficiency, and Sustainable Engineering. Transdisciplinary Approaches to Design
and Manufacturing Technology, 1st ed., I. Horwath and S. Schweizer, Eds. Bielefeld:
transcript Verlag.'
mla: Hanses, Hendrik, et al. “Challenges of Lightweight Design, Vehicles, and Rescuers.”
Climate Protection, Resource Efficiency, and Sustainable Engineering. Transdisciplinary
Approaches to Design and Manufacturing Technology, edited by Ilona Horwath
and Swetlana Schweizer, 1st ed., transcript Verlag.
short: 'H. Hanses, E.F. Akbulut Irmak, I. Horwath, T. Tröster, in: I. Horwath, S.
Schweizer (Eds.), Climate Protection, Resource Efficiency, and Sustainable Engineering.
Transdisciplinary Approaches to Design and Manufacturing Technology, 1st ed.,
transcript Verlag, Bielefeld, n.d.'
date_created: 2022-11-30T12:32:37Z
date_updated: 2025-06-06T08:16:59Z
department:
- _id: '603'
- _id: '9'
- _id: '321'
- _id: '149'
edition: '1'
editor:
- first_name: Ilona
full_name: Horwath, Ilona
last_name: Horwath
- first_name: Swetlana
full_name: Schweizer, Swetlana
last_name: Schweizer
language:
- iso: eng
place: Bielefeld
publication: ' Climate Protection, Resource Efficiency, and Sustainable Engineering.
Transdisciplinary Approaches to Design and Manufacturing Technology'
publication_identifier:
isbn:
- 978-3-8376-6377-8
publication_status: unpublished
publisher: transcript Verlag
quality_controlled: '1'
status: public
title: Challenges of lightweight design, vehicles, and rescuers
type: book_chapter
user_id: '15952'
year: '2023'
...