---
_id: '46495'
abstract:
- lang: eng
text: A parameter investigation for manufacturing a hybrid system through the prepreg
pressing process was carried out within the scope of this work to achieve optimal
adhesion properties. The hybrid specimen comprises an aluminium sheet of alloy
EN AW 6082 in T6 condition and a thermoset Carbon Fibre Reinforced Plastics prepreg.
The prepreg pressing process allows the curing reaction of epoxy resin and the
joining process to occur simultaneously to avoid an additional bonding process
step. The surface of the aluminium sheet was pretreated in advance using a pulsed
Nd:YAG laser to enhance the bonding properties. In the first step, the shear edge
tests investigated the adhesion properties achieved with different consolidation
(temperature, time and pressure) and laser parameters. Then, 3-point bending tests
were carried out to investigate the influence of the consolidation parameters
on the mechanical properties of the Carbon Fibre Reinforced Plastics-laminate.
In this way, the optimal parameter sets for manufacturing hybrid structures were
determined.
article_type: original
author:
- first_name: Shuang
full_name: Wu, Shuang
id: '48039'
last_name: Wu
orcid: 0000-0001-8645-9952
- first_name: Alexander
full_name: Delp, Alexander
last_name: Delp
- first_name: Jonathan
full_name: Freund, Jonathan
last_name: Freund
- first_name: Frank
full_name: Walther, Frank
last_name: Walther
- first_name: Jan
full_name: Haubrich, Jan
last_name: Haubrich
- first_name: Miriam
full_name: Löbbecke, Miriam
last_name: Löbbecke
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: Wu S, Delp A, Freund J, et al. Adhesion properties of the hybrid system made
of laser-structured aluminium EN AW 6082 and CFRP by co-bonding-pressing process.
The Journal of Adhesion. Published online 2023:1-29. doi:10.1080/00218464.2023.2245758
apa: Wu, S., Delp, A., Freund, J., Walther, F., Haubrich, J., Löbbecke, M., &
Tröster, T. (2023). Adhesion properties of the hybrid system made of laser-structured
aluminium EN AW 6082 and CFRP by co-bonding-pressing process. The Journal of
Adhesion, 1–29. https://doi.org/10.1080/00218464.2023.2245758
bibtex: '@article{Wu_Delp_Freund_Walther_Haubrich_Löbbecke_Tröster_2023, title={Adhesion
properties of the hybrid system made of laser-structured aluminium EN AW 6082
and CFRP by co-bonding-pressing process}, DOI={10.1080/00218464.2023.2245758},
journal={The Journal of Adhesion}, publisher={Informa UK Limited}, author={Wu,
Shuang and Delp, Alexander and Freund, Jonathan and Walther, Frank and Haubrich,
Jan and Löbbecke, Miriam and Tröster, Thomas}, year={2023}, pages={1–29} }'
chicago: Wu, Shuang, Alexander Delp, Jonathan Freund, Frank Walther, Jan Haubrich,
Miriam Löbbecke, and Thomas Tröster. “Adhesion Properties of the Hybrid System
Made of Laser-Structured Aluminium EN AW 6082 and CFRP by Co-Bonding-Pressing
Process.” The Journal of Adhesion, 2023, 1–29. https://doi.org/10.1080/00218464.2023.2245758.
ieee: 'S. Wu et al., “Adhesion properties of the hybrid system made of laser-structured
aluminium EN AW 6082 and CFRP by co-bonding-pressing process,” The Journal
of Adhesion, pp. 1–29, 2023, doi: 10.1080/00218464.2023.2245758.'
mla: Wu, Shuang, et al. “Adhesion Properties of the Hybrid System Made of Laser-Structured
Aluminium EN AW 6082 and CFRP by Co-Bonding-Pressing Process.” The Journal
of Adhesion, Informa UK Limited, 2023, pp. 1–29, doi:10.1080/00218464.2023.2245758.
short: S. Wu, A. Delp, J. Freund, F. Walther, J. Haubrich, M. Löbbecke, T. Tröster,
The Journal of Adhesion (2023) 1–29.
date_created: 2023-08-15T10:26:00Z
date_updated: 2025-01-30T12:33:42Z
department:
- _id: '321'
- _id: '149'
- _id: '9'
doi: 10.1080/00218464.2023.2245758
keyword:
- Materials Chemistry
- Surfaces
- Coatings and Films
- Surfaces and Interfaces
- Mechanics of Materials
- General Chemistry
language:
- iso: eng
page: 1-29
publication: The Journal of Adhesion
publication_identifier:
issn:
- 0021-8464
- 1545-5823
publication_status: published
publisher: Informa UK Limited
quality_controlled: '1'
status: public
title: Adhesion properties of the hybrid system made of laser-structured aluminium
EN AW 6082 and CFRP by co-bonding-pressing process
type: journal_article
user_id: '48039'
year: '2023'
...
---
_id: '48597'
abstract:
- lang: eng
text: This paper introduces an intrinsic manufacturing process of a hat profile
made of laser-pretreated aluminium sheet of alloy EN AW-6082 in T6 condition and
carbon fibre-reinforced plastic (CFRP) prepreg. The resin system used in combination
with CFRP was epoxy resin (EP). Before manufacturing, the laser-pretreated aluminium
sheet and CFRP prepreg were stacked to form a multi-layer composite, which was
pressed simultaneously in one process step. The optimal CFRP layer structure was
calculated in advance using the finite element method. During the forming process,
the curing reaction and the joining of the aluminium sheet and CFRP prepreg will
take place simultaneously. Thus, further joining techniques such as bonding and
riveting could be saved, and a much more efficient process could be achieved.
After manufacturing, shear-edge test was used to characterize the adhesion properties
of the hybrid part.
author:
- first_name: Shuang
full_name: Wu, Shuang
id: '48039'
last_name: Wu
orcid: 0000-0001-8645-9952
- first_name: Jonathan
full_name: Freund, Jonathan
last_name: Freund
- first_name: Alexander
full_name: Delp, Alexander
last_name: Delp
- first_name: Jan
full_name: Haubrich, Jan
last_name: Haubrich
- first_name: Miriam
full_name: Löbbecke, Miriam
last_name: Löbbecke
- first_name: Frank
full_name: Walther, Frank
last_name: Walther
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: 'Wu S, Freund J, Delp A, et al. Intrinsic forming of hybrid parts made of laser-structured
aluminium sheet and CFRP-Prepreg. In: ; 2023.'
apa: Wu, S., Freund, J., Delp, A., Haubrich, J., Löbbecke, M., Walther, F., &
Tröster, T. (2023). Intrinsic forming of hybrid parts made of laser-structured
aluminium sheet and CFRP-Prepreg. 23rd International Conference on Composite
Materials (ICCM23 2023).
bibtex: '@inproceedings{Wu_Freund_Delp_Haubrich_Löbbecke_Walther_Tröster_2023, title={Intrinsic
forming of hybrid parts made of laser-structured aluminium sheet and CFRP-Prepreg},
author={Wu, Shuang and Freund, Jonathan and Delp, Alexander and Haubrich, Jan
and Löbbecke, Miriam and Walther, Frank and Tröster, Thomas}, year={2023} }'
chicago: Wu, Shuang, Jonathan Freund, Alexander Delp, Jan Haubrich, Miriam Löbbecke,
Frank Walther, and Thomas Tröster. “Intrinsic Forming of Hybrid Parts Made of
Laser-Structured Aluminium Sheet and CFRP-Prepreg,” 2023.
ieee: S. Wu et al., “Intrinsic forming of hybrid parts made of laser-structured
aluminium sheet and CFRP-Prepreg,” presented at the 23rd International Conference
on Composite Materials (ICCM23 2023), 2023.
mla: Wu, Shuang, et al. Intrinsic Forming of Hybrid Parts Made of Laser-Structured
Aluminium Sheet and CFRP-Prepreg. 2023.
short: 'S. Wu, J. Freund, A. Delp, J. Haubrich, M. Löbbecke, F. Walther, T. Tröster,
in: 2023.'
conference:
end_date: 2023-08-04
name: 23rd International Conference on Composite Materials (ICCM23 2023)
start_date: 2023-07-31
date_created: 2023-11-02T11:37:32Z
date_updated: 2025-01-30T12:37:39Z
department:
- _id: '321'
- _id: '149'
- _id: '9'
language:
- iso: eng
popular_science: '1'
status: public
title: Intrinsic forming of hybrid parts made of laser-structured aluminium sheet
and CFRP-Prepreg
type: conference
user_id: '48039'
year: '2023'
...
---
_id: '48583'
author:
- first_name: Johannes
full_name: Süßmann, Johannes
id: '16220'
last_name: Süßmann
orcid: 0000-0001-5716-0863
citation:
ama: 'Süßmann J. When Did Europe Become Identified With Christianity? The Revolutionary
Origins of an All Too Common Slogan. In: Ralston J, Stosch K von, eds. Beyond
Binaries. Religious Diversity in Europe. Vol 37. Beiträge zur Komparativen
Theologie. Brill | Schöningh; 2023:19–30. doi:10.30965/9783657791552_003'
apa: Süßmann, J. (2023). When Did Europe Become Identified With Christianity? The
Revolutionary Origins of an All Too Common Slogan. In J. Ralston & K. von
Stosch (Eds.), Beyond Binaries. Religious Diversity in Europe (Vol. 37,
pp. 19–30). Brill | Schöningh. https://doi.org/10.30965/9783657791552_003
bibtex: '@inbook{Süßmann_2023, place={Paderborn}, series={Beiträge zur Komparativen
Theologie}, title={When Did Europe Become Identified With Christianity? The Revolutionary
Origins of an All Too Common Slogan}, volume={37}, DOI={10.30965/9783657791552_003},
booktitle={Beyond Binaries. Religious Diversity in Europe}, publisher={Brill |
Schöningh}, author={Süßmann, Johannes}, editor={Ralston, Joshua and Stosch, Klaus
von}, year={2023}, pages={19–30}, collection={Beiträge zur Komparativen Theologie}
}'
chicago: 'Süßmann, Johannes. “When Did Europe Become Identified With Christianity?
The Revolutionary Origins of an All Too Common Slogan.” In Beyond Binaries.
Religious Diversity in Europe, edited by Joshua Ralston and Klaus von Stosch,
37:19–30. Beiträge Zur Komparativen Theologie. Paderborn: Brill | Schöningh, 2023.
https://doi.org/10.30965/9783657791552_003.'
ieee: 'J. Süßmann, “When Did Europe Become Identified With Christianity? The Revolutionary
Origins of an All Too Common Slogan,” in Beyond Binaries. Religious Diversity
in Europe, vol. 37, J. Ralston and K. von Stosch, Eds. Paderborn: Brill |
Schöningh, 2023, pp. 19–30.'
mla: Süßmann, Johannes. “When Did Europe Become Identified With Christianity? The
Revolutionary Origins of an All Too Common Slogan.” Beyond Binaries. Religious
Diversity in Europe, edited by Joshua Ralston and Klaus von Stosch, vol. 37,
Brill | Schöningh, 2023, pp. 19–30, doi:10.30965/9783657791552_003.
short: 'J. Süßmann, in: J. Ralston, K. von Stosch (Eds.), Beyond Binaries. Religious
Diversity in Europe, Brill | Schöningh, Paderborn, 2023, pp. 19–30.'
date_created: 2023-11-01T14:43:41Z
date_updated: 2025-04-24T16:28:03Z
department:
- _id: '446'
- _id: '550'
doi: 10.30965/9783657791552_003
editor:
- first_name: Joshua
full_name: Ralston, Joshua
last_name: Ralston
- first_name: Klaus von
full_name: Stosch, Klaus von
last_name: Stosch
intvolume: ' 37'
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://doi.org/10.30965/9783657791552_003
oa: '1'
page: 19–30
place: Paderborn
publication: Beyond Binaries. Religious Diversity in Europe
publication_identifier:
isbn:
- 978-3-506-79155-9
- '3-506-79155-9 '
publication_status: published
publisher: Brill | Schöningh
quality_controlled: '1'
series_title: Beiträge zur Komparativen Theologie
status: public
title: When Did Europe Become Identified With Christianity? The Revolutionary Origins
of an All Too Common Slogan
type: book_chapter
user_id: '16220'
volume: 37
year: '2023'
...
---
_id: '49436'
author:
- first_name: Maximilian Alexander
full_name: Kaiser, Maximilian Alexander
id: '72351'
last_name: Kaiser
orcid: 0009-0008-1333-3396
- first_name: Alexander
full_name: Reitz, Alexander
last_name: Reitz
- first_name: Stefan
full_name: Konrad, Stefan
last_name: Konrad
- first_name: Thomas
full_name: Meyer, Thomas
last_name: Meyer
- first_name: Thorsten
full_name: Marten, Thorsten
id: '338'
last_name: Marten
orcid: 0009-0001-6433-7839
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: 'Kaiser MA, Reitz A, Konrad S, Meyer T, Marten T, Tröster T. Untersuchung energieeffizienter
und serientauglicher Erwärmungsstrategien mittels resistiver Erwärmung für den
Presshärteprozess. In: Merklein M, ed. Workshop Warmblechumformung. Vol
18. Warmumformung von höchstfesten Vergütungsstählen: Tagungsband zum 18. Erlanger
Workshop Warmblechumformung. Lehrstuhl für Fertigungstechnologie; 2023:99-118.'
apa: Kaiser, M. A., Reitz, A., Konrad, S., Meyer, T., Marten, T., & Tröster,
T. (2023). Untersuchung energieeffizienter und serientauglicher Erwärmungsstrategien
mittels resistiver Erwärmung für den Presshärteprozess. In M. Merklein (Ed.),
Workshop Warmblechumformung (Vol. 18, pp. 99–118). Lehrstuhl für Fertigungstechnologie.
bibtex: '@inproceedings{Kaiser_Reitz_Konrad_Meyer_Marten_Tröster_2023, place={Erlangen},
series={Warmumformung von höchstfesten Vergütungsstählen: Tagungsband zum 18.
Erlanger Workshop Warmblechumformung}, title={Untersuchung energieeffizienter
und serientauglicher Erwärmungsstrategien mittels resistiver Erwärmung für den
Presshärteprozess}, volume={18}, booktitle={Workshop Warmblechumformung}, publisher={Lehrstuhl
für Fertigungstechnologie}, author={Kaiser, Maximilian Alexander and Reitz, Alexander
and Konrad, Stefan and Meyer, Thomas and Marten, Thorsten and Tröster, Thomas},
editor={Merklein, Marion}, year={2023}, pages={99–118}, collection={Warmumformung
von höchstfesten Vergütungsstählen: Tagungsband zum 18. Erlanger Workshop Warmblechumformung}
}'
chicago: 'Kaiser, Maximilian Alexander, Alexander Reitz, Stefan Konrad, Thomas Meyer,
Thorsten Marten, and Thomas Tröster. “Untersuchung energieeffizienter und serientauglicher
Erwärmungsstrategien mittels resistiver Erwärmung für den Presshärteprozess.”
In Workshop Warmblechumformung, edited by Marion Merklein, 18:99–118. Warmumformung
von höchstfesten Vergütungsstählen: Tagungsband zum 18. Erlanger Workshop Warmblechumformung.
Erlangen: Lehrstuhl für Fertigungstechnologie, 2023.'
ieee: M. A. Kaiser, A. Reitz, S. Konrad, T. Meyer, T. Marten, and T. Tröster, “Untersuchung
energieeffizienter und serientauglicher Erwärmungsstrategien mittels resistiver
Erwärmung für den Presshärteprozess,” in Workshop Warmblechumformung, Fürth,
2023, vol. 18, pp. 99–118.
mla: Kaiser, Maximilian Alexander, et al. “Untersuchung energieeffizienter und serientauglicher
Erwärmungsstrategien mittels resistiver Erwärmung für den Presshärteprozess.”
Workshop Warmblechumformung, edited by Marion Merklein, vol. 18, Lehrstuhl
für Fertigungstechnologie, 2023, pp. 99–118.
short: 'M.A. Kaiser, A. Reitz, S. Konrad, T. Meyer, T. Marten, T. Tröster, in: M.
Merklein (Ed.), Workshop Warmblechumformung, Lehrstuhl für Fertigungstechnologie,
Erlangen, 2023, pp. 99–118.'
conference:
end_date: 2023-11-14
location: Fürth
name: 18. Erlanger Workshop Warmblechumformung
start_date: 2023-11-14
date_created: 2023-12-04T11:05:31Z
date_updated: 2025-05-13T09:20:20Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
editor:
- first_name: Marion
full_name: Merklein, Marion
last_name: Merklein
intvolume: ' 18'
keyword:
- Presshärten
- resistive Schnellerwärmung
- Energieeffizienz
language:
- iso: ger
page: 99-118
place: Erlangen
publication: Workshop Warmblechumformung
publication_identifier:
isbn:
- 978-3-00-077160-6
publication_status: published
publisher: Lehrstuhl für Fertigungstechnologie
series_title: 'Warmumformung von höchstfesten Vergütungsstählen: Tagungsband zum 18.
Erlanger Workshop Warmblechumformung'
status: public
title: Untersuchung energieeffizienter und serientauglicher Erwärmungsstrategien mittels
resistiver Erwärmung für den Presshärteprozess
type: conference_abstract
user_id: '72351'
volume: 18
year: '2023'
...
---
_id: '46560'
author:
- first_name: Stefanie
full_name: Vochatzer, Stefanie
id: '95153'
last_name: Vochatzer
citation:
ama: 'Vochatzer S. Connection and Community. In: Bentz J, Leibniz Insitute for
Educational Media , Georg Eckert Institute, eds. Creative Approaches to Climate
and Peace Education. An Educationr’s Guide to Using Storytelling and Art.
Leibniz Insitute for Educational Media, Georg Eckert Institute; 2023:48.'
apa: Vochatzer, S. (2023). Connection and Community. In J. Bentz , Leibniz Insitute
for Educational Media , & Georg Eckert Institute (Eds.), Creative Approaches
to Climate and Peace Education. An Educationr’s Guide to Using Storytelling and
Art (p. 48). Leibniz Insitute for Educational Media, Georg Eckert Institute.
bibtex: '@inbook{Vochatzer_2023, place={Braunschweig}, title={Connection and Community},
booktitle={Creative Approaches to Climate and Peace Education. An Educationr’s
Guide to Using Storytelling and Art}, publisher={Leibniz Insitute for Educational
Media, Georg Eckert Institute}, author={Vochatzer, Stefanie}, editor={Bentz ,
Julia and Leibniz Insitute for Educational Media and Georg Eckert Institute},
year={2023}, pages={48} }'
chicago: 'Vochatzer, Stefanie. “Connection and Community.” In Creative Approaches
to Climate and Peace Education. An Educationr’s Guide to Using Storytelling and
Art, edited by Julia Bentz , Leibniz Insitute for Educational Media , and
Georg Eckert Institute, 48. Braunschweig: Leibniz Insitute for Educational Media,
Georg Eckert Institute, 2023.'
ieee: 'S. Vochatzer, “Connection and Community,” in Creative Approaches to Climate
and Peace Education. An Educationr’s Guide to Using Storytelling and Art,
J. Bentz , Leibniz Insitute for Educational Media , and Georg Eckert Institute,
Eds. Braunschweig: Leibniz Insitute for Educational Media, Georg Eckert Institute,
2023, p. 48.'
mla: Vochatzer, Stefanie. “Connection and Community.” Creative Approaches to
Climate and Peace Education. An Educationr’s Guide to Using Storytelling and Art,
edited by Julia Bentz et al., Leibniz Insitute for Educational Media, Georg
Eckert Institute, 2023, p. 48.
short: 'S. Vochatzer, in: J. Bentz , Leibniz Insitute for Educational Media , Georg
Eckert Institute (Eds.), Creative Approaches to Climate and Peace Education. An
Educationr’s Guide to Using Storytelling and Art, Leibniz Insitute for Educational
Media, Georg Eckert Institute, Braunschweig, 2023, p. 48.'
corporate_editor:
- 'Leibniz Insitute for Educational Media '
- Georg Eckert Institute
date_created: 2023-08-17T09:23:08Z
date_updated: 2025-05-25T12:39:38Z
department:
- _id: '723'
- _id: '724'
- _id: '36'
editor:
- first_name: 'Julia '
full_name: 'Bentz , Julia '
last_name: 'Bentz '
language:
- iso: eng
page: '48'
place: Braunschweig
publication: Creative Approaches to Climate and Peace Education. An Educationr’s Guide
to Using Storytelling and Art
publication_identifier:
unknown:
- 'ISBN: 978-3-88304-000-4'
publication_status: published
publisher: Leibniz Insitute for Educational Media, Georg Eckert Institute
status: public
title: Connection and Community
type: book_chapter
user_id: '95153'
year: '2023'
...
---
_id: '51190'
abstract:
- lang: eng
text: Abstract. Force-displacement measurements and macrosections are commonly
used methods to validate numerical models of clinching processes. However, these
ex-situ methods often lead to springback of elastic deformations and crack-closing
after unloading. In contrast, the in-situ computed tomography (CT) can provide
three-dimensional images of the clinching point under loading conditions. So far,
the quantity of elastic springback that causes measuring deviations between in-
and ex-situ measurements is not determined. In this paper, a method is described
to quantitatively compare the results of in-situ CT, ex-situ CT and CT scans of
cut specimens, which are prepared for macrosectioning, among each other. The method
is applied to a single-lap shear test of two clinched aluminum sheets. Here, the
test is conducted to specific process steps, then the specimen is CT scanned in-situ
(during loading) and ex-situ (after unloading). Subsequently, the specimens are
cut for macrosectioning and CT scanned. Finally, the outer contours and the interfaces
of cross section images are determined by digital image analysis and the deviations
over the clinching point between ex- and in-situ methods are calculated.
author:
- first_name: Daniel
full_name: Köhler, Daniel
last_name: Köhler
- first_name: Robert
full_name: Kupfer, Robert
last_name: Kupfer
- first_name: Juliane
full_name: Troschitz, Juliane
last_name: Troschitz
- first_name: Maik
full_name: Gude, Maik
last_name: Gude
citation:
ama: 'Köhler D, Kupfer R, Troschitz J, Gude M. Comparison of ex- and in-situ investigations
of clinched single-lap shear specimens. In: Materials Research Proceedings.
Materials Research Forum LLC; 2023. doi:10.21741/9781644902417-20'
apa: Köhler, D., Kupfer, R., Troschitz, J., & Gude, M. (2023). Comparison of
ex- and in-situ investigations of clinched single-lap shear specimens. Materials
Research Proceedings. https://doi.org/10.21741/9781644902417-20
bibtex: '@inproceedings{Köhler_Kupfer_Troschitz_Gude_2023, title={Comparison of
ex- and in-situ investigations of clinched single-lap shear specimens}, DOI={10.21741/9781644902417-20},
booktitle={Materials Research Proceedings}, publisher={Materials Research Forum
LLC}, author={Köhler, Daniel and Kupfer, Robert and Troschitz, Juliane and Gude,
Maik}, year={2023} }'
chicago: Köhler, Daniel, Robert Kupfer, Juliane Troschitz, and Maik Gude. “Comparison
of Ex- and in-Situ Investigations of Clinched Single-Lap Shear Specimens.” In
Materials Research Proceedings. Materials Research Forum LLC, 2023. https://doi.org/10.21741/9781644902417-20.
ieee: 'D. Köhler, R. Kupfer, J. Troschitz, and M. Gude, “Comparison of ex- and in-situ
investigations of clinched single-lap shear specimens,” 2023, doi: 10.21741/9781644902417-20.'
mla: Köhler, Daniel, et al. “Comparison of Ex- and in-Situ Investigations of Clinched
Single-Lap Shear Specimens.” Materials Research Proceedings, Materials
Research Forum LLC, 2023, doi:10.21741/9781644902417-20.
short: 'D. Köhler, R. Kupfer, J. Troschitz, M. Gude, in: Materials Research Proceedings,
Materials Research Forum LLC, 2023.'
date_created: 2024-02-06T14:48:44Z
date_updated: 2025-06-02T20:18:56Z
department:
- _id: '157'
- _id: '43'
doi: 10.21741/9781644902417-20
language:
- iso: eng
project:
- _id: '130'
grant_number: '418701707'
name: 'TRR 285: TRR 285'
- _id: '133'
name: 'TRR 285 - C: TRR 285 - Project Area C'
- _id: '148'
name: 'TRR 285 – C04: TRR 285 - Subproject C04'
publication: Materials Research Proceedings
publication_identifier:
issn:
- 2474-395X
publication_status: published
publisher: Materials Research Forum LLC
status: public
title: Comparison of ex- and in-situ investigations of clinched single-lap shear specimens
type: conference
user_id: '83408'
year: '2023'
...
---
_id: '51194'
author:
- first_name: Daniel
full_name: Köhler, Daniel
last_name: Köhler
- first_name: Richard
full_name: Stephan, Richard
last_name: Stephan
- first_name: Robert
full_name: Kupfer, Robert
last_name: Kupfer
- first_name: Juliane
full_name: Troschitz, Juliane
last_name: Troschitz
- first_name: Alexander
full_name: Brosius, Alexander
last_name: Brosius
- first_name: Maik
full_name: Gude, Maik
last_name: Gude
citation:
ama: 'Köhler D, Stephan R, Kupfer R, Troschitz J, Brosius A, Gude M. In-situ Computed
Tomography and Transient Dynamic Analysis of a Single-Lap Shear Test with a Composite-Metal
Clinch Point. In: Lecture Notes in Production Engineering. Springer International
Publishing; 2023. doi:10.1007/978-3-031-18318-8_28'
apa: Köhler, D., Stephan, R., Kupfer, R., Troschitz, J., Brosius, A., & Gude,
M. (2023). In-situ Computed Tomography and Transient Dynamic Analysis of a Single-Lap
Shear Test with a Composite-Metal Clinch Point. In Lecture Notes in Production
Engineering. Springer International Publishing. https://doi.org/10.1007/978-3-031-18318-8_28
bibtex: '@inbook{Köhler_Stephan_Kupfer_Troschitz_Brosius_Gude_2023, place={Cham},
title={In-situ Computed Tomography and Transient Dynamic Analysis of a Single-Lap
Shear Test with a Composite-Metal Clinch Point}, DOI={10.1007/978-3-031-18318-8_28},
booktitle={Lecture Notes in Production Engineering}, publisher={Springer International
Publishing}, author={Köhler, Daniel and Stephan, Richard and Kupfer, Robert and
Troschitz, Juliane and Brosius, Alexander and Gude, Maik}, year={2023} }'
chicago: 'Köhler, Daniel, Richard Stephan, Robert Kupfer, Juliane Troschitz, Alexander
Brosius, and Maik Gude. “In-Situ Computed Tomography and Transient Dynamic Analysis
of a Single-Lap Shear Test with a Composite-Metal Clinch Point.” In Lecture
Notes in Production Engineering. Cham: Springer International Publishing,
2023. https://doi.org/10.1007/978-3-031-18318-8_28.'
ieee: 'D. Köhler, R. Stephan, R. Kupfer, J. Troschitz, A. Brosius, and M. Gude,
“In-situ Computed Tomography and Transient Dynamic Analysis of a Single-Lap Shear
Test with a Composite-Metal Clinch Point,” in Lecture Notes in Production Engineering,
Cham: Springer International Publishing, 2023.'
mla: Köhler, Daniel, et al. “In-Situ Computed Tomography and Transient Dynamic Analysis
of a Single-Lap Shear Test with a Composite-Metal Clinch Point.” Lecture Notes
in Production Engineering, Springer International Publishing, 2023, doi:10.1007/978-3-031-18318-8_28.
short: 'D. Köhler, R. Stephan, R. Kupfer, J. Troschitz, A. Brosius, M. Gude, in:
Lecture Notes in Production Engineering, Springer International Publishing, Cham,
2023.'
date_created: 2024-02-06T15:03:03Z
date_updated: 2025-06-02T20:19:17Z
department:
- _id: '157'
- _id: '43'
doi: 10.1007/978-3-031-18318-8_28
language:
- iso: eng
place: Cham
project:
- _id: '130'
grant_number: '418701707'
name: 'TRR 285: TRR 285'
- _id: '133'
name: 'TRR 285 - C: TRR 285 - Project Area C'
- _id: '148'
name: 'TRR 285 – C04: TRR 285 - Subproject C04'
publication: Lecture Notes in Production Engineering
publication_identifier:
isbn:
- '9783031183171'
- '9783031183188'
issn:
- 2194-0525
- 2194-0533
publication_status: published
publisher: Springer International Publishing
status: public
title: In-situ Computed Tomography and Transient Dynamic Analysis of a Single-Lap
Shear Test with a Composite-Metal Clinch Point
type: book_chapter
user_id: '83408'
year: '2023'
...
---
_id: '48642'
author:
- first_name: Emine Fulya
full_name: Akbulut Irmak, Emine Fulya
id: '72008'
last_name: Akbulut Irmak
orcid: 0000-0002-1338-810X
- first_name: Hendrik
full_name: Hanses, Hendrik
id: '64527'
last_name: Hanses
- first_name: Ilona
full_name: Horwath, Ilona
id: '68836'
last_name: Horwath
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: 'Akbulut Irmak EF, Hanses H, Horwath I, Tröster T. Case Study III: Challenges
of lightweight design, vehicles, and rescuers. In: Horwath I, Schweizer S, eds.
Climate Protection, Resource Efficiency, and Sustainable Engineering. transcript
Verlag; 2023. doi:10.14361/9783839463772-006'
apa: 'Akbulut Irmak, E. F., Hanses, H., Horwath, I., & Tröster, T. (2023). Case
Study III: Challenges of lightweight design, vehicles, and rescuers. In I. Horwath
& S. Schweizer (Eds.), Climate Protection, Resource Efficiency, and Sustainable
Engineering. transcript Verlag. https://doi.org/10.14361/9783839463772-006'
bibtex: '@inbook{Akbulut Irmak_Hanses_Horwath_Tröster_2023, place={Bielefeld, Germany},
title={Case Study III: Challenges of lightweight design, vehicles, and rescuers},
DOI={10.14361/9783839463772-006},
booktitle={Climate Protection, Resource Efficiency, and Sustainable Engineering},
publisher={transcript Verlag}, author={Akbulut Irmak, Emine Fulya and Hanses,
Hendrik and Horwath, Ilona and Tröster, Thomas}, editor={Horwath, Ilona and Schweizer,
Swetlana}, year={2023} }'
chicago: 'Akbulut Irmak, Emine Fulya, Hendrik Hanses, Ilona Horwath, and Thomas
Tröster. “Case Study III: Challenges of Lightweight Design, Vehicles, and Rescuers.”
In Climate Protection, Resource Efficiency, and Sustainable Engineering,
edited by Ilona Horwath and Swetlana Schweizer. Bielefeld, Germany: transcript
Verlag, 2023. https://doi.org/10.14361/9783839463772-006.'
ieee: 'E. F. Akbulut Irmak, H. Hanses, I. Horwath, and T. Tröster, “Case Study III:
Challenges of lightweight design, vehicles, and rescuers,” in Climate Protection,
Resource Efficiency, and Sustainable Engineering, I. Horwath and S. Schweizer,
Eds. Bielefeld, Germany: transcript Verlag, 2023.'
mla: 'Akbulut Irmak, Emine Fulya, et al. “Case Study III: Challenges of Lightweight
Design, Vehicles, and Rescuers.” Climate Protection, Resource Efficiency, and
Sustainable Engineering, edited by Ilona Horwath and Swetlana Schweizer, transcript
Verlag, 2023, doi:10.14361/9783839463772-006.'
short: 'E.F. Akbulut Irmak, H. Hanses, I. Horwath, T. Tröster, in: I. Horwath, S.
Schweizer (Eds.), Climate Protection, Resource Efficiency, and Sustainable Engineering,
transcript Verlag, Bielefeld, Germany, 2023.'
date_created: 2023-11-07T11:04:03Z
date_updated: 2025-06-06T07:52:36Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
doi: 10.14361/9783839463772-006
editor:
- first_name: Ilona
full_name: Horwath, Ilona
last_name: Horwath
- first_name: Swetlana
full_name: Schweizer, Swetlana
last_name: Schweizer
language:
- iso: eng
place: Bielefeld, Germany
publication: Climate Protection, Resource Efficiency, and Sustainable Engineering
publication_identifier:
isbn:
- '9783837663778'
- '9783839463772'
issn:
- 2703-1543
- 2703-1551
publication_status: published
publisher: transcript Verlag
status: public
title: 'Case Study III: Challenges of lightweight design, vehicles, and rescuers'
type: book_chapter
user_id: '72008'
year: '2023'
...
---
_id: '47536'
abstract:
- lang: eng
text: AbstractEfforts to enhance sustainability
in all areas of life are increasing worldwide. In the field of manufacturing technology,
a wide variety of approaches are being used to improve both resource and energy
efficiency. Efficiency as well as sustainability can be improved by creating a
circular economy or through energy-efficient recycling processes. As part of the
interdisciplinary research group "Light—Efficient—Mobile" investigations on the
energy-efficient friction-induced recycling process have been carried out at the
department of Forming and Machining Technology at Paderborn University. E.g. using
the friction-induced recycling process, different formless solid aluminum materials
can be direct recycled into semi-finished products in an energy-efficient manner.
The results of investigations with regard to the influence of the geometrical
shape and filling rate of the aluminum particles to be recycled as well as the
rotational speed of the continuously rotating wheel are explained in this paper.
In addition to the recycling of aluminum chips, aluminum particles like powders
from the field of additive manufacturing are processed. Based on these results,
the future potentials of solid-state recycling processes and their contribution
to the circular economy are discussed. The main focus here is on future interdisciplinary
research projects to achieve circularity in the manufacturing of user-individual
semi-finished products as well as the possibility to selectively adjust the product
properties with the continuous recycling process.
article_number: '59'
article_type: original
author:
- first_name: Thomas
full_name: Borgert, Thomas
id: '83141'
last_name: Borgert
- first_name: Dennis
full_name: Milaege, Dennis
last_name: Milaege
- first_name: Swetlana
full_name: Schweizer, Swetlana
id: '8938'
last_name: Schweizer
- first_name: Werner
full_name: Homberg, Werner
id: '233'
last_name: Homberg
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: Borgert T, Milaege D, Schweizer S, Homberg W, Schaper M, Tröster T. Potentials
of a friction-induced recycling process to improve resource and energy efficiency
in manufacturing technology. International Journal of Material Forming.
2023;16(6). doi:10.1007/s12289-023-01785-w
apa: Borgert, T., Milaege, D., Schweizer, S., Homberg, W., Schaper, M., & Tröster,
T. (2023). Potentials of a friction-induced recycling process to improve resource
and energy efficiency in manufacturing technology. International Journal of
Material Forming, 16(6), Article 59. https://doi.org/10.1007/s12289-023-01785-w
bibtex: '@article{Borgert_Milaege_Schweizer_Homberg_Schaper_Tröster_2023, title={Potentials
of a friction-induced recycling process to improve resource and energy efficiency
in manufacturing technology}, volume={16}, DOI={10.1007/s12289-023-01785-w},
number={659}, journal={International Journal of Material Forming}, publisher={Springer
Science and Business Media LLC}, author={Borgert, Thomas and Milaege, Dennis and
Schweizer, Swetlana and Homberg, Werner and Schaper, Mirko and Tröster, Thomas},
year={2023} }'
chicago: Borgert, Thomas, Dennis Milaege, Swetlana Schweizer, Werner Homberg, Mirko
Schaper, and Thomas Tröster. “Potentials of a Friction-Induced Recycling Process
to Improve Resource and Energy Efficiency in Manufacturing Technology.” International
Journal of Material Forming 16, no. 6 (2023). https://doi.org/10.1007/s12289-023-01785-w.
ieee: 'T. Borgert, D. Milaege, S. Schweizer, W. Homberg, M. Schaper, and T. Tröster,
“Potentials of a friction-induced recycling process to improve resource and energy
efficiency in manufacturing technology,” International Journal of Material
Forming, vol. 16, no. 6, Art. no. 59, 2023, doi: 10.1007/s12289-023-01785-w.'
mla: Borgert, Thomas, et al. “Potentials of a Friction-Induced Recycling Process
to Improve Resource and Energy Efficiency in Manufacturing Technology.” International
Journal of Material Forming, vol. 16, no. 6, 59, Springer Science and Business
Media LLC, 2023, doi:10.1007/s12289-023-01785-w.
short: T. Borgert, D. Milaege, S. Schweizer, W. Homberg, M. Schaper, T. Tröster,
International Journal of Material Forming 16 (2023).
date_created: 2023-10-02T06:59:53Z
date_updated: 2025-06-06T08:18:51Z
department:
- _id: '156'
- _id: '149'
- _id: '321'
- _id: '9'
- _id: '158'
doi: 10.1007/s12289-023-01785-w
intvolume: ' 16'
issue: '6'
keyword:
- General Materials Science
language:
- iso: eng
publication: International Journal of Material Forming
publication_identifier:
issn:
- 1960-6206
- 1960-6214
publication_status: published
publisher: Springer Science and Business Media LLC
quality_controlled: '1'
status: public
title: Potentials of a friction-induced recycling process to improve resource and
energy efficiency in manufacturing technology
type: journal_article
user_id: '15952'
volume: 16
year: '2023'
...
---
_id: '46486'
author:
- first_name: Florian
full_name: Pfeifer, Florian
id: '22717'
last_name: Pfeifer
- first_name: Lukas
full_name: Knorr, Lukas
id: '90391'
last_name: Knorr
- first_name: Florian
full_name: Schlosser, Florian
id: '88614'
last_name: Schlosser
- first_name: Thorsten
full_name: Marten, Thorsten
id: '338'
last_name: Marten
orcid: 0009-0001-6433-7839
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: Pfeifer F, Knorr L, Schlosser F, Marten T, Tröster T. Ecological and Economic
Feasibility of Inductive Heating for Sustainable Press Hardening Processes. Journal
of Sustainable Development of Energy, Water and Environment Systems. 2023;11(3):1-20.
doi:10.13044/j.sdewes.d11.0450
apa: Pfeifer, F., Knorr, L., Schlosser, F., Marten, T., & Tröster, T. (2023).
Ecological and Economic Feasibility of Inductive Heating for Sustainable Press
Hardening Processes. Journal of Sustainable Development of Energy, Water and
Environment Systems, 11(3), 1–20. https://doi.org/10.13044/j.sdewes.d11.0450
bibtex: '@article{Pfeifer_Knorr_Schlosser_Marten_Tröster_2023, title={Ecological
and Economic Feasibility of Inductive Heating for Sustainable Press Hardening
Processes}, volume={11}, DOI={10.13044/j.sdewes.d11.0450},
number={3}, journal={Journal of Sustainable Development of Energy, Water and Environment
Systems}, publisher={SDEWES Centre}, author={Pfeifer, Florian and Knorr, Lukas
and Schlosser, Florian and Marten, Thorsten and Tröster, Thomas}, year={2023},
pages={1–20} }'
chicago: 'Pfeifer, Florian, Lukas Knorr, Florian Schlosser, Thorsten Marten, and
Thomas Tröster. “Ecological and Economic Feasibility of Inductive Heating for
Sustainable Press Hardening Processes.” Journal of Sustainable Development
of Energy, Water and Environment Systems 11, no. 3 (2023): 1–20. https://doi.org/10.13044/j.sdewes.d11.0450.'
ieee: 'F. Pfeifer, L. Knorr, F. Schlosser, T. Marten, and T. Tröster, “Ecological
and Economic Feasibility of Inductive Heating for Sustainable Press Hardening
Processes,” Journal of Sustainable Development of Energy, Water and Environment
Systems, vol. 11, no. 3, pp. 1–20, 2023, doi: 10.13044/j.sdewes.d11.0450.'
mla: Pfeifer, Florian, et al. “Ecological and Economic Feasibility of Inductive
Heating for Sustainable Press Hardening Processes.” Journal of Sustainable
Development of Energy, Water and Environment Systems, vol. 11, no. 3, SDEWES
Centre, 2023, pp. 1–20, doi:10.13044/j.sdewes.d11.0450.
short: F. Pfeifer, L. Knorr, F. Schlosser, T. Marten, T. Tröster, Journal of Sustainable
Development of Energy, Water and Environment Systems 11 (2023) 1–20.
date_created: 2023-08-14T15:25:01Z
date_updated: 2025-06-06T08:20:26Z
department:
- _id: '9'
- _id: '149'
- _id: '321'
doi: 10.13044/j.sdewes.d11.0450
intvolume: ' 11'
issue: '3'
keyword:
- Energy Engineering and Power Technology
- Water Science and Technology
- Environmental Science (miscellaneous)
- Renewable Energy
- Sustainability and the Environment
language:
- iso: eng
page: 1-20
publication: Journal of Sustainable Development of Energy, Water and Environment Systems
publication_identifier:
issn:
- 1848-9257
publication_status: published
publisher: SDEWES Centre
status: public
title: Ecological and Economic Feasibility of Inductive Heating for Sustainable Press
Hardening Processes
type: journal_article
user_id: '15952'
volume: 11
year: '2023'
...
---
_id: '34165'
author:
- first_name: Hendrik
full_name: Hanses, Hendrik
id: '64527'
last_name: Hanses
- first_name: Emine Fulya
full_name: Akbulut Irmak, Emine Fulya
id: '72008'
last_name: Akbulut Irmak
orcid: 0000-0002-1338-810X
- first_name: Ilona
full_name: Horwath, Ilona
id: '68836'
last_name: Horwath
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: 'Hanses H, Akbulut Irmak EF, Horwath I, Tröster T. Challenges of lightweight
design, vehicles, and rescuers. In: Horwath I, Schweizer S, eds. Climate Protection,
Resource Efficiency, and Sustainable Engineering. Transdisciplinary Approaches
to Design and Manufacturing Technology. 1st ed. transcript Verlag.'
apa: Hanses, H., Akbulut Irmak, E. F., Horwath, I., & Tröster, T. (n.d.). Challenges
of lightweight design, vehicles, and rescuers. In I. Horwath & S. Schweizer
(Eds.), Climate Protection, Resource Efficiency, and Sustainable Engineering.
Transdisciplinary Approaches to Design and Manufacturing Technology (1st ed.).
transcript Verlag.
bibtex: '@inbook{Hanses_Akbulut Irmak_Horwath_Tröster, place={Bielefeld}, edition={1},
title={Challenges of lightweight design, vehicles, and rescuers}, booktitle={
Climate Protection, Resource Efficiency, and Sustainable Engineering. Transdisciplinary
Approaches to Design and Manufacturing Technology}, publisher={transcript Verlag},
author={Hanses, Hendrik and Akbulut Irmak, Emine Fulya and Horwath, Ilona and
Tröster, Thomas}, editor={Horwath, Ilona and Schweizer, Swetlana} }'
chicago: 'Hanses, Hendrik, Emine Fulya Akbulut Irmak, Ilona Horwath, and Thomas
Tröster. “Challenges of Lightweight Design, Vehicles, and Rescuers.” In Climate
Protection, Resource Efficiency, and Sustainable Engineering. Transdisciplinary
Approaches to Design and Manufacturing Technology, edited by Ilona Horwath
and Swetlana Schweizer, 1st ed. Bielefeld: transcript Verlag, n.d.'
ieee: 'H. Hanses, E. F. Akbulut Irmak, I. Horwath, and T. Tröster, “Challenges of
lightweight design, vehicles, and rescuers,” in Climate Protection, Resource
Efficiency, and Sustainable Engineering. Transdisciplinary Approaches to Design
and Manufacturing Technology, 1st ed., I. Horwath and S. Schweizer, Eds. Bielefeld:
transcript Verlag.'
mla: Hanses, Hendrik, et al. “Challenges of Lightweight Design, Vehicles, and Rescuers.”
Climate Protection, Resource Efficiency, and Sustainable Engineering. Transdisciplinary
Approaches to Design and Manufacturing Technology, edited by Ilona Horwath
and Swetlana Schweizer, 1st ed., transcript Verlag.
short: 'H. Hanses, E.F. Akbulut Irmak, I. Horwath, T. Tröster, in: I. Horwath, S.
Schweizer (Eds.), Climate Protection, Resource Efficiency, and Sustainable Engineering.
Transdisciplinary Approaches to Design and Manufacturing Technology, 1st ed.,
transcript Verlag, Bielefeld, n.d.'
date_created: 2022-11-30T12:32:37Z
date_updated: 2025-06-06T08:16:59Z
department:
- _id: '603'
- _id: '9'
- _id: '321'
- _id: '149'
edition: '1'
editor:
- first_name: Ilona
full_name: Horwath, Ilona
last_name: Horwath
- first_name: Swetlana
full_name: Schweizer, Swetlana
last_name: Schweizer
language:
- iso: eng
place: Bielefeld
publication: ' Climate Protection, Resource Efficiency, and Sustainable Engineering.
Transdisciplinary Approaches to Design and Manufacturing Technology'
publication_identifier:
isbn:
- 978-3-8376-6377-8
publication_status: unpublished
publisher: transcript Verlag
quality_controlled: '1'
status: public
title: Challenges of lightweight design, vehicles, and rescuers
type: book_chapter
user_id: '15952'
year: '2023'
...
---
_id: '60905'
author:
- first_name: Moritz
full_name: Ostermann, Moritz
id: '44763'
last_name: Ostermann
orcid: https://orcid.org/0000-0003-1146-0443
- first_name: Eric
full_name: Dierkes, Eric
last_name: Dierkes
- first_name: Thorsten
full_name: Marten, Thorsten
id: '338'
last_name: Marten
orcid: 0009-0001-6433-7839
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: 'Ostermann M, Dierkes E, Marten T, Tröster T. Life Cycle Assessment of Lightweight
Structures in Vehicles for New Mobility Concepts. In: Proceedings of the 18th
Conference on Sustainable Development of Energy, Water and Environmental Systems,
Dubrovnik, Croatia 2023. ; 2023.'
apa: Ostermann, M., Dierkes, E., Marten, T., & Tröster, T. (2023). Life Cycle
Assessment of Lightweight Structures in Vehicles for New Mobility Concepts. Proceedings
of the 18th Conference on Sustainable Development of Energy, Water and Environmental
Systems, Dubrovnik, Croatia 2023. 18th Conference on Sustainable Development
of Energy, Water and Environmental Systems, Dubrovnik, Croatia.
bibtex: '@inproceedings{Ostermann_Dierkes_Marten_Tröster_2023, title={Life Cycle
Assessment of Lightweight Structures in Vehicles for New Mobility Concepts}, booktitle={Proceedings
of the 18th Conference on Sustainable Development of Energy, Water and Environmental
Systems, Dubrovnik, Croatia 2023}, author={Ostermann, Moritz and Dierkes, Eric
and Marten, Thorsten and Tröster, Thomas}, year={2023} }'
chicago: Ostermann, Moritz, Eric Dierkes, Thorsten Marten, and Thomas Tröster. “Life
Cycle Assessment of Lightweight Structures in Vehicles for New Mobility Concepts.”
In Proceedings of the 18th Conference on Sustainable Development of Energy,
Water and Environmental Systems, Dubrovnik, Croatia 2023, 2023.
ieee: M. Ostermann, E. Dierkes, T. Marten, and T. Tröster, “Life Cycle Assessment
of Lightweight Structures in Vehicles for New Mobility Concepts,” presented at
the 18th Conference on Sustainable Development of Energy, Water and Environmental
Systems, Dubrovnik, Croatia, 2023.
mla: Ostermann, Moritz, et al. “Life Cycle Assessment of Lightweight Structures
in Vehicles for New Mobility Concepts.” Proceedings of the 18th Conference
on Sustainable Development of Energy, Water and Environmental Systems, Dubrovnik,
Croatia 2023, 2023.
short: 'M. Ostermann, E. Dierkes, T. Marten, T. Tröster, in: Proceedings of the
18th Conference on Sustainable Development of Energy, Water and Environmental
Systems, Dubrovnik, Croatia 2023, 2023.'
conference:
end_date: 2023-09-29
location: Dubrovnik, Croatia
name: 18th Conference on Sustainable Development of Energy, Water and Environmental
Systems
start_date: 2023-09-24
date_created: 2025-08-07T06:56:09Z
date_updated: 2026-02-17T10:36:25Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: eng
publication: Proceedings of the 18th Conference on Sustainable Development of Energy,
Water and Environmental Systems, Dubrovnik, Croatia 2023
publication_status: published
status: public
title: Life Cycle Assessment of Lightweight Structures in Vehicles for New Mobility
Concepts
type: conference_abstract
user_id: '338'
year: '2023'
...
---
_id: '52679'
abstract:
- lang: eng
text: Progressive digitization throughout the entire product data life cycle requires
a more sensitive handling and understanding of data within engineering processes.
Regarding engineering research data, the aim is to implement the FAIR data principles
(Findable, Accessible, Interoperable, Reusable) to guarantee the post-usability
of research data. To ensure the quality of data throughout the entire research
process a methodical approach had been developed. Based on the quality categories
Intrinsic, Representative, Contextual and Available, the related quality dimensions
are considered differentiated along the research data life cycle and presented
in a concept. As a use case, this concept is carried out on a tensile test with
documentation of results in a research data management system.
author:
- first_name: Laura
full_name: Müller, Laura
id: '44605'
last_name: Müller
- first_name: Max Leo
full_name: Wawer, Max Leo
last_name: Wawer
- first_name: Norman
full_name: Heimes, Norman
last_name: Heimes
- first_name: Johanna
full_name: Uhe, Johanna
last_name: Uhe
- first_name: Oliver
full_name: Koepler, Oliver
last_name: Koepler
- first_name: Sören
full_name: Auer, Sören
last_name: Auer
- first_name: Roland
full_name: Lachmayer, Roland
last_name: Lachmayer
- first_name: Iryna
full_name: Mozgova, Iryna
id: '95903'
last_name: Mozgova
citation:
ama: 'Müller L, Wawer ML, Heimes N, et al. Datenqualitätssicherung im Forschungsprozess
am Beispiel von Zugversuchen. In: DS 125: Proceedings of the 34th Symposium
Design for X (DFX2023). Erlangen : Ehemaligennetzwerk des Lehrstuhls für Konstruktionstechnik
(KTmfk) Erlangen e.V.; 2023:143-152. doi:
https://doi.org/10.35199/dfx2023.15'
apa: 'Müller, L., Wawer, M. L., Heimes, N., Uhe, J., Koepler, O., Auer, S., Lachmayer,
R., & Mozgova, I. (2023). Datenqualitätssicherung im Forschungsprozess am
Beispiel von Zugversuchen. DS 125: Proceedings of the 34th Symposium Design
for X (DFX2023), 143–152. https://doi.org/
https://doi.org/10.35199/dfx2023.15'
bibtex: '@inproceedings{Müller_Wawer_Heimes_Uhe_Koepler_Auer_Lachmayer_Mozgova_2023,
title={Datenqualitätssicherung im Forschungsprozess am Beispiel von Zugversuchen},
DOI={ https://doi.org/10.35199/dfx2023.15},
booktitle={DS 125: Proceedings of the 34th Symposium Design for X (DFX2023)},
publisher={Erlangen : Ehemaligennetzwerk des Lehrstuhls für Konstruktionstechnik
(KTmfk) Erlangen e.V.}, author={Müller, Laura and Wawer, Max Leo and Heimes, Norman
and Uhe, Johanna and Koepler, Oliver and Auer, Sören and Lachmayer, Roland and
Mozgova, Iryna}, year={2023}, pages={143–152} }'
chicago: 'Müller, Laura, Max Leo Wawer, Norman Heimes, Johanna Uhe, Oliver Koepler,
Sören Auer, Roland Lachmayer, and Iryna Mozgova. “Datenqualitätssicherung Im Forschungsprozess
Am Beispiel von Zugversuchen.” In DS 125: Proceedings of the 34th Symposium
Design for X (DFX2023), 143–52. Erlangen : Ehemaligennetzwerk des Lehrstuhls
für Konstruktionstechnik (KTmfk) Erlangen e.V., 2023. https://doi.org/ https://doi.org/10.35199/dfx2023.15.'
ieee: 'L. Müller et al., “Datenqualitätssicherung im Forschungsprozess am
Beispiel von Zugversuchen,” in DS 125: Proceedings of the 34th Symposium Design
for X (DFX2023), 2023, pp. 143–152, doi:
https://doi.org/10.35199/dfx2023.15.'
mla: 'Müller, Laura, et al. “Datenqualitätssicherung Im Forschungsprozess Am Beispiel
von Zugversuchen.” DS 125: Proceedings of the 34th Symposium Design for X (DFX2023),
Erlangen : Ehemaligennetzwerk des Lehrstuhls für Konstruktionstechnik (KTmfk)
Erlangen e.V., 2023, pp. 143–52, doi:
https://doi.org/10.35199/dfx2023.15.'
short: 'L. Müller, M.L. Wawer, N. Heimes, J. Uhe, O. Koepler, S. Auer, R. Lachmayer,
I. Mozgova, in: DS 125: Proceedings of the 34th Symposium Design for X (DFX2023),
Erlangen : Ehemaligennetzwerk des Lehrstuhls für Konstruktionstechnik (KTmfk)
Erlangen e.V., 2023, pp. 143–152.'
date_created: 2024-03-20T11:21:43Z
date_updated: 2026-02-20T13:00:21Z
department:
- _id: '741'
doi: ' https://doi.org/10.35199/dfx2023.15'
language:
- iso: eng
page: 143-152
publication: 'DS 125: Proceedings of the 34th Symposium Design for X (DFX2023)'
publisher: 'Erlangen : Ehemaligennetzwerk des Lehrstuhls für Konstruktionstechnik
(KTmfk) Erlangen e.V.'
quality_controlled: '1'
status: public
title: Datenqualitätssicherung im Forschungsprozess am Beispiel von Zugversuchen
type: conference
user_id: '44605'
year: '2023'
...
---
_id: '52689'
author:
- first_name: Marius
full_name: Striewe, Marius
id: '30228'
last_name: Striewe
- first_name: Dominik
full_name: Teutenberg, Dominik
id: '537'
last_name: Teutenberg
- first_name: David
full_name: Hein, David
id: '7728'
last_name: Hein
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: Lars
full_name: Schmelzle, Lars
last_name: Schmelzle
- first_name: Julia
full_name: Mergheim, Julia
last_name: Mergheim
- first_name: Gunnar
full_name: Possart, Gunnar
last_name: Possart
citation:
ama: 'Striewe M, Teutenberg D, Hein D, et al. Methode zur Simulation des temperaturabhängigen
Crashverhaltens von strukturellen Klebverbindungen. In: DVS Media GmbH, ed. Klebtechnische
Doktorandenseminare 2020 - 2022. Vol 369. DVS Berichte. ; 2023.'
apa: Striewe, M., Teutenberg, D., Hein, D., Meschut, G., Schmelzle, L., Mergheim,
J., & Possart, G. (2023). Methode zur Simulation des temperaturabhängigen
Crashverhaltens von strukturellen Klebverbindungen. In DVS Media GmbH (Ed.), Klebtechnische
Doktorandenseminare 2020 - 2022 (Vol. 369).
bibtex: '@inbook{Striewe_Teutenberg_Hein_Meschut_Schmelzle_Mergheim_Possart_2023,
series={DVS Berichte}, title={Methode zur Simulation des temperaturabhängigen
Crashverhaltens von strukturellen Klebverbindungen}, volume={369}, booktitle={Klebtechnische
Doktorandenseminare 2020 - 2022}, author={Striewe, Marius and Teutenberg, Dominik
and Hein, David and Meschut, Gerson and Schmelzle, Lars and Mergheim, Julia and
Possart, Gunnar}, editor={DVS Media GmbH}, year={2023}, collection={DVS Berichte}
}'
chicago: Striewe, Marius, Dominik Teutenberg, David Hein, Gerson Meschut, Lars Schmelzle,
Julia Mergheim, and Gunnar Possart. “Methode zur Simulation des temperaturabhängigen
Crashverhaltens von strukturellen Klebverbindungen.” In Klebtechnische Doktorandenseminare
2020 - 2022, edited by DVS Media GmbH, Vol. 369. DVS Berichte, 2023.
ieee: M. Striewe et al., “Methode zur Simulation des temperaturabhängigen
Crashverhaltens von strukturellen Klebverbindungen,” in Klebtechnische Doktorandenseminare
2020 - 2022, vol. 369, DVS Media GmbH, Ed. 2023.
mla: Striewe, Marius, et al. “Methode zur Simulation des temperaturabhängigen Crashverhaltens
von strukturellen Klebverbindungen.” Klebtechnische Doktorandenseminare 2020
- 2022, edited by DVS Media GmbH, vol. 369, 2023.
short: 'M. Striewe, D. Teutenberg, D. Hein, G. Meschut, L. Schmelzle, J. Mergheim,
G. Possart, in: DVS Media GmbH (Ed.), Klebtechnische Doktorandenseminare 2020
- 2022, 2023.'
conference:
location: Blankenburg (Harz)
name: 13. Doktorandenseminar Klebtechnik
corporate_editor:
- DVS Media GmbH
date_created: 2024-03-20T14:00:11Z
date_updated: 2026-02-23T08:27:39Z
department:
- _id: '157'
intvolume: ' 369'
language:
- iso: ger
publication: Klebtechnische Doktorandenseminare 2020 - 2022
publication_identifier:
isbn:
- 978-3-96144-139-6
quality_controlled: '1'
series_title: DVS Berichte
status: public
title: Methode zur Simulation des temperaturabhängigen Crashverhaltens von strukturellen
Klebverbindungen
type: book_chapter
user_id: '537'
volume: 369
year: '2023'
...
---
_id: '46164'
author:
- first_name: Nick
full_name: Chudalla, Nick
id: '41235'
last_name: Chudalla
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: Dominik
full_name: Teutenberg, Dominik
id: '537'
last_name: Teutenberg
- first_name: Miriam
full_name: Schneider, Miriam
last_name: Schneider
- first_name: 'Dominic '
full_name: 'Smart, Dominic '
last_name: Smart
citation:
ama: Chudalla N, Meschut G, Teutenberg D, Schneider M, Smart D. Rechnergestützte
Versagensanalyse geklebter Verbindungen. adhäsion KLEBEN & DICHTEN.
2023;(6). doi:https://doi.org/10.1007/s35145-023-1198-x
apa: Chudalla, N., Meschut, G., Teutenberg, D., Schneider, M., & Smart, D. (2023).
Rechnergestützte Versagensanalyse geklebter Verbindungen. Adhäsion KLEBEN
& DICHTEN, 6. https://doi.org/10.1007/s35145-023-1198-x
bibtex: '@article{Chudalla_Meschut_Teutenberg_Schneider_Smart_2023, title={Rechnergestützte
Versagensanalyse geklebter Verbindungen}, DOI={https://doi.org/10.1007/s35145-023-1198-x }, number={6}, journal={ adhäsion
KLEBEN & DICHTEN}, author={Chudalla, Nick and Meschut, Gerson and Teutenberg,
Dominik and Schneider, Miriam and Smart, Dominic }, year={2023} }'
chicago: Chudalla, Nick, Gerson Meschut, Dominik Teutenberg, Miriam Schneider, and
Dominic Smart. “Rechnergestützte Versagensanalyse Geklebter Verbindungen.”
Adhäsion KLEBEN & DICHTEN, no. 6 (2023). https://doi.org/10.1007/s35145-023-1198-x .
ieee: 'N. Chudalla, G. Meschut, D. Teutenberg, M. Schneider, and D. Smart, “Rechnergestützte
Versagensanalyse geklebter Verbindungen,” adhäsion KLEBEN & DICHTEN,
no. 6, 2023, doi: https://doi.org/10.1007/s35145-023-1198-x
.'
mla: Chudalla, Nick, et al. “Rechnergestützte Versagensanalyse Geklebter Verbindungen.”
Adhäsion KLEBEN & DICHTEN, no. 6, 2023, doi:https://doi.org/10.1007/s35145-023-1198-x .
short: N. Chudalla, G. Meschut, D. Teutenberg, M. Schneider, D. Smart, Adhäsion
KLEBEN & DICHTEN (2023).
date_created: 2023-07-27T06:55:20Z
date_updated: 2026-02-23T08:27:14Z
department:
- _id: '157'
doi: 'https://doi.org/10.1007/s35145-023-1198-x '
issue: '6'
language:
- iso: eng
publication: ' adhäsion KLEBEN & DICHTEN'
quality_controlled: '1'
status: public
title: Rechnergestützte Versagensanalyse geklebter Verbindungen
type: journal_article
user_id: '537'
year: '2023'
...
---
_id: '50727'
abstract:
- lang: eng
text: "Die aktuellen politischen und wirtschaftlichen Rahmenbedingungen zur Reduzierung
der CO2-Emissionen sowie der Trend zur flächendeckenden Elektromobilität führen
zu einer Vielzahl an neuen Herausforderungen für die Auslegung zukünftiger Fahrzeugkonzepte.
Eine besondere Herausforderung ist das durch die Batterie ins Fahrzeug eingebrachte
Zusatzgewicht. Hierdurch ergibt sich ein Konflikt zu der bestehenden Kundenerwartung
nach einer hohen Reichweite.\r\nDurch den umfangreichen Einsatz von höchstfesten
Stählen in dünnen Blechdicken im Karosseriebau soll die Reduzierung des Gesamtfahrzeuggewichts
vorangetrieben werden. Vor allem im stahlintensiven Leichtbau ist das Widerstandspunktschweißen
aufgrund des hohen Automatisierungsgrads, der Prozesssicherheit und der damit
verbundenen Wirtschaftlichkeit das dominierende Fügeverfahren. Um Begrenzungen
des Bauraums der Karosserie zu begegnen und um den Materialeinsatz im Leichtbau
möglichst effizient zu gestalten, werden mehrschnittige Punktschweißverbindungen
eingesetzt. Hieraus ergeben sich neue Herausforderungen für die Vorhersage des
Trag- und Versagensverhaltens unter Crashbelastung.\r\nDieser Beitrag stellt eine
systematische Charakterisierung von 3-Blechverbindungen zur Auffindung von formelmäßigen,
empirischen Zusammenhängen zwischen der Festigkeit der Verbindung und den Einflussgrößen
vor.\r\nNach der Identifikation geeigneter Einflussgrößen, wie zum Beispiel Blechfestigkeit,
Blechanordnung, Blechdickenkombination sowie Belastungsart und Lasteinleitung,
auf das Trag- und Versagensverhalten, werden numerische Simulationen durchgeführt,
um Ursachen für auftretende Phänomene aus den experimentellen Ergebnissen aufzuklären.
Weiterhin wird untersucht, inwieweit das Verhalten von 2-Blechverbindungen auf
\r\n3-Blechverbindungen übertragbar ist. Die gefundenen Zusammenhänge sollen schnelle
und kostengünstige Abschätzungen über die Festigkeit von 3-Blechbverbindungen
ermöglichen. Darüber hinaus werden Ersatzmodelle für die Crashsimulation von \r\n3-Blechverbindungen
entwickelt, die recheneffizient für die Sicherheitsbewertung von großen, geschweißten
Bauteilen eingesetzt werden können. Dabei sollen insbesondere die Einflüsse des
Lastangriffs an jeweils einer oder beiden Fügebenen auf die Festigkeit und Energieabsorption
unter verschiedenen Belastungen wie Zug, Scherung sowie Biegung abbildbar sein. "
author:
- first_name: Viktoria
full_name: Olfert, Viktoria
id: '5974'
last_name: Olfert
- first_name: Lilia
full_name: Schuster, Lilia
last_name: Schuster
- first_name: Philipp
full_name: Bähr, Philipp
last_name: Bähr
- first_name: David
full_name: Hein, David
id: '7728'
last_name: Hein
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: Silke
full_name: Sommer, Silke
last_name: Sommer
citation:
ama: 'Olfert V, Schuster L, Bähr P, Hein D, Meschut G, Sommer S. Methodenentwicklung
zur Prognose des Crashverhaltens von widerstandspunktgeschweißten 3-Stahlblechverbindungen.
In: ; 2023.'
apa: Olfert, V., Schuster, L., Bähr, P., Hein, D., Meschut, G., & Sommer, S.
(2023). Methodenentwicklung zur Prognose des Crashverhaltens von widerstandspunktgeschweißten
3-Stahlblechverbindungen. 25. DVC-Sondertagung Widerstandsschweissen , Duisburg.
bibtex: '@inproceedings{Olfert_Schuster_Bähr_Hein_Meschut_Sommer_2023, title={Methodenentwicklung
zur Prognose des Crashverhaltens von widerstandspunktgeschweißten 3-Stahlblechverbindungen},
author={Olfert, Viktoria and Schuster, Lilia and Bähr, Philipp and Hein, David
and Meschut, Gerson and Sommer, Silke}, year={2023} }'
chicago: Olfert, Viktoria, Lilia Schuster, Philipp Bähr, David Hein, Gerson Meschut,
and Silke Sommer. “Methodenentwicklung Zur Prognose Des Crashverhaltens von Widerstandspunktgeschweißten
3-Stahlblechverbindungen,” 2023.
ieee: V. Olfert, L. Schuster, P. Bähr, D. Hein, G. Meschut, and S. Sommer, “Methodenentwicklung
zur Prognose des Crashverhaltens von widerstandspunktgeschweißten 3-Stahlblechverbindungen,”
presented at the 25. DVC-Sondertagung Widerstandsschweissen , Duisburg, 2023.
mla: Olfert, Viktoria, et al. Methodenentwicklung Zur Prognose Des Crashverhaltens
von Widerstandspunktgeschweißten 3-Stahlblechverbindungen. 2023.
short: 'V. Olfert, L. Schuster, P. Bähr, D. Hein, G. Meschut, S. Sommer, in: 2023.'
conference:
end_date: 2023-06-29
location: Duisburg
name: '25. DVC-Sondertagung Widerstandsschweissen '
start_date: 2023-06-28
date_created: 2024-01-22T09:25:52Z
date_updated: 2026-02-23T10:26:52Z
department:
- _id: '157'
language:
- iso: eng
quality_controlled: '1'
status: public
title: Methodenentwicklung zur Prognose des Crashverhaltens von widerstandspunktgeschweißten
3-Stahlblechverbindungen
type: conference
user_id: '7728'
year: '2023'
...
---
_id: '48585'
abstract:
- lang: eng
text: The use of stainless steel with high strain hardening as material for self-piercing
rivets is a promising approach to shorten the manufacturing process. Due to the
corrosion resistance of the material and the achieved high strength within the
forming process, the heat treatment and the coating can be omitted. As the strength
within the rivet material is achieved by cold forming, the strength distribution
within the rivet remains intact after the manufacturing process. The aim of the
contribution presented is the exploitation of the potential of this strength distribution
to improve the performance of the self-piercing rivets. Therefore, the scope of
the examination is on the analysis of the influence of the local strength on the
deformation behaviour of the rivet during joining. While it is unfeasible to manufacture
rivets with any desired strength distribution, numerical simulation offers an
efficient opportunity to study the effects of varying local strengths. By using
a definable true strain distribution within the rivet as presetting for the simulation,
different strength distributions can be modelled. Through the simulation of the
joining process, the deformation behaviour of the rivet can be examined. Based
on the insights of this analysis, a strength distribution is created that supports
the joining of challenging material combinations consisting of high strength steel
and aluminium. Finally, the approach is verified by experimental joining tests.
author:
- first_name: Benedikt
full_name: Uhe, Benedikt
id: '38131'
last_name: Uhe
- first_name: Clara-Maria
full_name: Kuball, Clara-Maria
last_name: Kuball
- first_name: Marion
full_name: Merklein, Marion
last_name: Merklein
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: 'Uhe B, Kuball C-M, Merklein M, Meschut G. Controlled Rivet Deformation During
Self-piercing Riveting Through a Tailored Strength Distribution Within the Rivet
Material. In: Mocellin K, Bouchard P-O, Bigot Régis, Balan T, eds. Proceedings
of the 14th International Conference on the Technology of Plasticity - Current
Trends in the Technology of Plasticity. Vol 3. Lecture Notes in Mechanical
Engineering. Springer; 2023:64-71. doi:10.1007/978-3-031-41341-4_8'
apa: Uhe, B., Kuball, C.-M., Merklein, M., & Meschut, G. (2023). Controlled
Rivet Deformation During Self-piercing Riveting Through a Tailored Strength Distribution
Within the Rivet Material. In K. Mocellin, P.-O. Bouchard, Régis Bigot, &
T. Balan (Eds.), Proceedings of the 14th International Conference on the Technology
of Plasticity - Current Trends in the Technology of Plasticity. (Vol. 3, pp.
64–71). Springer. https://doi.org/10.1007/978-3-031-41341-4_8
bibtex: '@inproceedings{Uhe_Kuball_Merklein_Meschut_2023, place={Cham}, series={Lecture
Notes in Mechanical Engineering.}, title={Controlled Rivet Deformation During
Self-piercing Riveting Through a Tailored Strength Distribution Within the Rivet
Material}, volume={3}, DOI={10.1007/978-3-031-41341-4_8},
booktitle={Proceedings of the 14th International Conference on the Technology
of Plasticity - Current Trends in the Technology of Plasticity.}, publisher={Springer},
author={Uhe, Benedikt and Kuball, Clara-Maria and Merklein, Marion and Meschut,
Gerson}, editor={Mocellin, Katia and Bouchard, Pierre-Olivier and Bigot, Régis
and Balan, Tudor}, year={2023}, pages={64–71}, collection={Lecture Notes in Mechanical
Engineering.} }'
chicago: 'Uhe, Benedikt, Clara-Maria Kuball, Marion Merklein, and Gerson Meschut.
“Controlled Rivet Deformation During Self-Piercing Riveting Through a Tailored
Strength Distribution Within the Rivet Material.” In Proceedings of the 14th
International Conference on the Technology of Plasticity - Current Trends in the
Technology of Plasticity., edited by Katia Mocellin, Pierre-Olivier Bouchard, Régis
Bigot, and Tudor Balan, 3:64–71. Lecture Notes in Mechanical Engineering. Cham:
Springer, 2023. https://doi.org/10.1007/978-3-031-41341-4_8.'
ieee: 'B. Uhe, C.-M. Kuball, M. Merklein, and G. Meschut, “Controlled Rivet Deformation
During Self-piercing Riveting Through a Tailored Strength Distribution Within
the Rivet Material,” in Proceedings of the 14th International Conference on
the Technology of Plasticity - Current Trends in the Technology of Plasticity.,
2023, vol. 3, pp. 64–71, doi: 10.1007/978-3-031-41341-4_8.'
mla: Uhe, Benedikt, et al. “Controlled Rivet Deformation During Self-Piercing Riveting
Through a Tailored Strength Distribution Within the Rivet Material.” Proceedings
of the 14th International Conference on the Technology of Plasticity - Current
Trends in the Technology of Plasticity., edited by Katia Mocellin et al.,
vol. 3, Springer, 2023, pp. 64–71, doi:10.1007/978-3-031-41341-4_8.
short: 'B. Uhe, C.-M. Kuball, M. Merklein, G. Meschut, in: K. Mocellin, P.-O. Bouchard, Régis
Bigot, T. Balan (Eds.), Proceedings of the 14th International Conference on the
Technology of Plasticity - Current Trends in the Technology of Plasticity., Springer,
Cham, 2023, pp. 64–71.'
date_created: 2023-11-02T08:06:11Z
date_updated: 2026-02-27T10:07:14Z
department:
- _id: '157'
doi: 10.1007/978-3-031-41341-4_8
editor:
- first_name: Katia
full_name: Mocellin, Katia
last_name: Mocellin
- first_name: Pierre-Olivier
full_name: Bouchard, Pierre-Olivier
last_name: Bouchard
- first_name: ' Régis'
full_name: Bigot, Régis
last_name: Bigot
- first_name: Tudor
full_name: Balan, Tudor
last_name: Balan
intvolume: ' 3'
language:
- iso: eng
page: 64-71
place: Cham
publication: Proceedings of the 14th International Conference on the Technology of
Plasticity - Current Trends in the Technology of Plasticity.
publisher: Springer
quality_controlled: '1'
series_title: Lecture Notes in Mechanical Engineering.
status: public
title: Controlled Rivet Deformation During Self-piercing Riveting Through a Tailored
Strength Distribution Within the Rivet Material
type: conference
user_id: '53912'
volume: 3
year: '2023'
...
---
_id: '48584'
abstract:
- lang: eng
text: The sustainability of the manufacturing industry is of special importance
to increase the protection of the environment. The production of fasteners like
self-piercing rivets, however, is costly, time-consuming and energy-intensive.
The heat treatment and the coating, which are mandatory in conventional self-piercing
rivets to achieve adequate strength, ductility and corrosion resistance, are especially
crucial in this respect. Within this paper, an approach for an increase in the
sustainability in fastener production is presented. The use of alternative, high
strain hardening stainless steels as rivet material enables a shortening of the
process chain, because post treatment of the rivets after they are formed can
be omitted. As the change in rivet material and processing causes some issues
along the process chain, the focus of this paper is on the holistic evaluation
of the challenges within the forming of high strain hardening steel and the impact
of the changed rivet properties on the joining result.
article_number: '193'
author:
- first_name: Benedikt
full_name: Uhe, Benedikt
id: '38131'
last_name: Uhe
- first_name: Clara-Maria
full_name: Kuball, Clara-Maria
last_name: Kuball
- first_name: Marion
full_name: Merklein, Marion
last_name: Merklein
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: Uhe B, Kuball C-M, Merklein M, Meschut G. Increased Sustainability in Fastener
Production with the Example of Self-Piercing Rivets. Journal of Manufacturing
and Materials Processing. 2023;7(6). doi:10.3390/jmmp7060193
apa: Uhe, B., Kuball, C.-M., Merklein, M., & Meschut, G. (2023). Increased Sustainability
in Fastener Production with the Example of Self-Piercing Rivets. Journal of
Manufacturing and Materials Processing, 7(6), Article 193. https://doi.org/10.3390/jmmp7060193
bibtex: '@article{Uhe_Kuball_Merklein_Meschut_2023, title={Increased Sustainability
in Fastener Production with the Example of Self-Piercing Rivets}, volume={7},
DOI={10.3390/jmmp7060193}, number={6193},
journal={Journal of Manufacturing and Materials Processing}, publisher={MDPI AG},
author={Uhe, Benedikt and Kuball, Clara-Maria and Merklein, Marion and Meschut,
Gerson}, year={2023} }'
chicago: Uhe, Benedikt, Clara-Maria Kuball, Marion Merklein, and Gerson Meschut.
“Increased Sustainability in Fastener Production with the Example of Self-Piercing
Rivets.” Journal of Manufacturing and Materials Processing 7, no. 6 (2023).
https://doi.org/10.3390/jmmp7060193.
ieee: 'B. Uhe, C.-M. Kuball, M. Merklein, and G. Meschut, “Increased Sustainability
in Fastener Production with the Example of Self-Piercing Rivets,” Journal of
Manufacturing and Materials Processing, vol. 7, no. 6, Art. no. 193, 2023,
doi: 10.3390/jmmp7060193.'
mla: Uhe, Benedikt, et al. “Increased Sustainability in Fastener Production with
the Example of Self-Piercing Rivets.” Journal of Manufacturing and Materials
Processing, vol. 7, no. 6, 193, MDPI AG, 2023, doi:10.3390/jmmp7060193.
short: B. Uhe, C.-M. Kuball, M. Merklein, G. Meschut, Journal of Manufacturing and
Materials Processing 7 (2023).
date_created: 2023-11-02T07:58:35Z
date_updated: 2026-02-27T10:16:17Z
department:
- _id: '157'
doi: 10.3390/jmmp7060193
intvolume: ' 7'
issue: '6'
keyword:
- Industrial and Manufacturing Engineering
- Mechanical Engineering
- Mechanics of Materials
language:
- iso: eng
publication: Journal of Manufacturing and Materials Processing
publication_identifier:
issn:
- 2504-4494
publication_status: published
publisher: MDPI AG
quality_controlled: '1'
status: public
title: Increased Sustainability in Fastener Production with the Example of Self-Piercing
Rivets
type: journal_article
user_id: '38131'
volume: 7
year: '2023'
...
---
_id: '44220'
abstract:
- lang: eng
text: With regard to environmental protection, the sustainability of production
processes is decisive. Mechanical joining technologies like self-piercing riveting
are of special importance with regard to realising lightweight constructions in
the automotive industry. However, the production of self-piercing rivets is costly,
time-consuming and energy-intensive, as the rivets conventionally must be heat
treated and coated in order to ensure an adequate strength, ductility and corrosion
resistance. Within this paper, it is shown by the example of a newly established
rivet manufacturing process how the sustainability of fastener production can
be increased. The general approach in this context is the use of alternative,
high strain hardening stainless steels as rivet material, which allows the omission
of the post treatment of the rivets after forming. The shortening of the process
chain enables a more sustainable rivet production. Thus, not only the energy consumption
is reduced, but also costs, which is why the novel manufacturing process is also
of interest from an economic point of view.
author:
- first_name: Benedikt
full_name: Uhe, Benedikt
id: '38131'
last_name: Uhe
- first_name: Clara-Maria
full_name: Kuball, Clara-Maria
last_name: Kuball
- first_name: Marion
full_name: Merklein, Marion
last_name: Merklein
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: 'Uhe B, Kuball C-M, Merklein M, Meschut G. Approach for a sustainable process
chain in manufacturing of fasteners for mechanical joining. In: Materials Research
Proceedings; 2023. doi:10.21741/9781644902417-49'
apa: Uhe, B., Kuball, C.-M., Merklein, M., & Meschut, G. (2023). Approach
for a sustainable process chain in manufacturing of fasteners for mechanical joining.
20th International Conference on Sheet Metal (SheMet) 2023, Nürnberg. https://doi.org/10.21741/9781644902417-49
bibtex: '@inproceedings{Uhe_Kuball_Merklein_Meschut_2023, place={Millersville, PA,
USA}, title={Approach for a sustainable process chain in manufacturing of fasteners
for mechanical joining}, DOI={10.21741/9781644902417-49},
publisher={Materials Research Proceedings}, author={Uhe, Benedikt and Kuball,
Clara-Maria and Merklein, Marion and Meschut, Gerson}, year={2023} }'
chicago: 'Uhe, Benedikt, Clara-Maria Kuball, Marion Merklein, and Gerson Meschut.
“Approach for a Sustainable Process Chain in Manufacturing of Fasteners for Mechanical
Joining.” Millersville, PA, USA: Materials Research Proceedings, 2023. https://doi.org/10.21741/9781644902417-49.'
ieee: 'B. Uhe, C.-M. Kuball, M. Merklein, and G. Meschut, “Approach for a sustainable
process chain in manufacturing of fasteners for mechanical joining,” presented
at the 20th International Conference on Sheet Metal (SheMet) 2023, Nürnberg, 2023,
doi: 10.21741/9781644902417-49.'
mla: Uhe, Benedikt, et al. Approach for a Sustainable Process Chain in Manufacturing
of Fasteners for Mechanical Joining. Materials Research Proceedings, 2023,
doi:10.21741/9781644902417-49.
short: 'B. Uhe, C.-M. Kuball, M. Merklein, G. Meschut, in: Materials Research Proceedings,
Millersville, PA, USA, 2023.'
conference:
end_date: 2023-04-05
location: Nürnberg
name: 20th International Conference on Sheet Metal (SheMet) 2023
start_date: 2023-04-02
date_created: 2023-04-27T10:56:34Z
date_updated: 2026-02-27T10:19:07Z
department:
- _id: '157'
doi: 10.21741/9781644902417-49
language:
- iso: eng
place: Millersville, PA, USA
publisher: Materials Research Proceedings
quality_controlled: '1'
status: public
title: Approach for a sustainable process chain in manufacturing of fasteners for
mechanical joining
type: conference
user_id: '53912'
year: '2023'
...
---
_id: '51117'
author:
- first_name: Claus
full_name: Scheidemann, Claus
id: '38259'
last_name: Scheidemann
- first_name: Tobias
full_name: Hemsel, Tobias
id: '210'
last_name: Hemsel
- first_name: Olga
full_name: Friesen, Olga
id: '44026'
last_name: Friesen
- first_name: Leander
full_name: Claes, Leander
id: '11829'
last_name: Claes
orcid: 0000-0002-4393-268X
- first_name: Walter
full_name: Sextro, Walter
id: '21220'
last_name: Sextro
citation:
ama: 'Scheidemann C, Hemsel T, Friesen O, Claes L, Sextro W. Influence of Temperature
and Pre-Stress on the Piezoelectric Material Behavior of Ring-Shaped Ceramics.
In: ; 2023.'
apa: Scheidemann, C., Hemsel, T., Friesen, O., Claes, L., & Sextro, W. (2023).
Influence of Temperature and Pre-Stress on the Piezoelectric Material Behavior
of Ring-Shaped Ceramics. 7th International Conference on Advanced Electromaterials
(ICAE 2023), Jeju, Korea.
bibtex: '@inproceedings{Scheidemann_Hemsel_Friesen_Claes_Sextro_2023, title={Influence
of Temperature and Pre-Stress on the Piezoelectric Material Behavior of Ring-Shaped
Ceramics}, author={Scheidemann, Claus and Hemsel, Tobias and Friesen, Olga and
Claes, Leander and Sextro, Walter}, year={2023} }'
chicago: Scheidemann, Claus, Tobias Hemsel, Olga Friesen, Leander Claes, and Walter
Sextro. “Influence of Temperature and Pre-Stress on the Piezoelectric Material
Behavior of Ring-Shaped Ceramics,” 2023.
ieee: C. Scheidemann, T. Hemsel, O. Friesen, L. Claes, and W. Sextro, “Influence
of Temperature and Pre-Stress on the Piezoelectric Material Behavior of Ring-Shaped
Ceramics,” presented at the 7th International Conference on Advanced Electromaterials
(ICAE 2023), Jeju, Korea, 2023.
mla: Scheidemann, Claus, et al. Influence of Temperature and Pre-Stress on the
Piezoelectric Material Behavior of Ring-Shaped Ceramics. 2023.
short: 'C. Scheidemann, T. Hemsel, O. Friesen, L. Claes, W. Sextro, in: 2023.'
conference:
end_date: 2023-11-03
location: Jeju, Korea
name: 7th International Conference on Advanced Electromaterials (ICAE 2023)
start_date: 2023-10-31
date_created: 2024-02-01T15:55:44Z
date_updated: 2026-03-02T10:59:13Z
ddc:
- '620'
department:
- _id: '151'
- _id: '49'
file:
- access_level: open_access
content_type: application/pdf
creator: hemsel
date_created: 2026-01-30T07:15:31Z
date_updated: 2026-03-02T10:59:13Z
file_id: '63815'
file_name: Sch23_ICAE_2023.pdf
file_size: 608243
relation: main_file
file_date_updated: 2026-03-02T10:59:13Z
has_accepted_license: '1'
language:
- iso: eng
oa: '1'
project:
- _id: '245'
name: 'FOR 5208: Modellbasierte Bestimmung nichtlinearer Eigenschaften von Piezokeramiken
für Leistungsschallanwendungen (NEPTUN)'
status: public
title: Influence of Temperature and Pre-Stress on the Piezoelectric Material Behavior
of Ring-Shaped Ceramics
type: conference
user_id: '210'
year: '2023'
...