--- _id: '2381' abstract: - lang: eng text: Metric facility location and K-means are well-known problems of combinatorial optimization. Both admit a fairly simple heuristic called single-swap, which adds, drops or swaps open facilities until it reaches a local optimum. For both problems, it is known that this algorithm produces a solution that is at most a constant factor worse than the respective global optimum. In this paper, we show that single-swap applied to the weighted metric uncapacitated facility location and weighted discrete K-means problem is tightly PLS-complete and hence has exponential worst-case running time. author: - first_name: Sascha full_name: Brauer, Sascha id: '13291' last_name: Brauer citation: ama: 'Brauer S. Complexity of Single-Swap Heuristics for Metric Facility Location and Related Problems. In: Fotakis D, Pagourtzis A, Paschos VT, eds. Lecture Notes in Computer Science. Vol 10236. Cham: Springer International Publishing; 2017:116-127. doi:10.1007/978-3-319-57586-5_11' apa: 'Brauer, S. (2017). Complexity of Single-Swap Heuristics for Metric Facility Location and Related Problems. In D. Fotakis, A. Pagourtzis, & V. T. Paschos (Eds.), Lecture Notes in Computer Science (Vol. 10236, pp. 116–127). Cham: Springer International Publishing. https://doi.org/10.1007/978-3-319-57586-5_11' bibtex: '@inbook{Brauer_2017, place={Cham}, title={Complexity of Single-Swap Heuristics for Metric Facility Location and Related Problems}, volume={10236}, DOI={10.1007/978-3-319-57586-5_11}, booktitle={Lecture Notes in Computer Science}, publisher={Springer International Publishing}, author={Brauer, Sascha}, editor={Fotakis, Dimitris and Pagourtzis, Aris and Paschos, Vangelis Th.Editors}, year={2017}, pages={116–127} }' chicago: 'Brauer, Sascha. “Complexity of Single-Swap Heuristics for Metric Facility Location and Related Problems.” In Lecture Notes in Computer Science, edited by Dimitris Fotakis, Aris Pagourtzis, and Vangelis Th. Paschos, 10236:116–27. Cham: Springer International Publishing, 2017. https://doi.org/10.1007/978-3-319-57586-5_11.' ieee: 'S. Brauer, “Complexity of Single-Swap Heuristics for Metric Facility Location and Related Problems,” in Lecture Notes in Computer Science, vol. 10236, D. Fotakis, A. Pagourtzis, and V. T. Paschos, Eds. Cham: Springer International Publishing, 2017, pp. 116–127.' mla: Brauer, Sascha. “Complexity of Single-Swap Heuristics for Metric Facility Location and Related Problems.” Lecture Notes in Computer Science, edited by Dimitris Fotakis et al., vol. 10236, Springer International Publishing, 2017, pp. 116–27, doi:10.1007/978-3-319-57586-5_11. short: 'S. Brauer, in: D. Fotakis, A. Pagourtzis, V.T. Paschos (Eds.), Lecture Notes in Computer Science, Springer International Publishing, Cham, 2017, pp. 116–127.' conference: end_date: 2017-05-26 location: Athens, Greece name: 10th International Conference on Algorithms and Complexity start_date: 2017-05-24 date_created: 2018-04-17T12:20:53Z date_updated: 2022-01-06T06:56:00Z department: - _id: '64' doi: 10.1007/978-3-319-57586-5_11 editor: - first_name: Dimitris full_name: Fotakis, Dimitris last_name: Fotakis - first_name: Aris full_name: Pagourtzis, Aris last_name: Pagourtzis - first_name: Vangelis Th. full_name: Paschos, Vangelis Th. last_name: Paschos intvolume: ' 10236' language: - iso: eng page: 116-127 place: Cham publication: Lecture Notes in Computer Science publication_identifier: isbn: - '9783319575858' - '9783319575865' issn: - 0302-9743 - 1611-3349 publication_status: published publisher: Springer International Publishing status: public title: Complexity of Single-Swap Heuristics for Metric Facility Location and Related Problems type: book_chapter user_id: '13291' volume: 10236 year: '2017' ... --- _id: '23910' author: - first_name: Anatolii full_name: Andreiev, Anatolii id: '50215' last_name: Andreiev - first_name: Olexandr full_name: Grydin, Olexandr id: '43822' last_name: Grydin - first_name: Mirko full_name: Schaper, Mirko id: '43720' last_name: Schaper citation: ama: 'Andreiev A, Grydin O, Schaper M. A Rapid Heating Method for Press Hardening Processing. In: Proceedings of the 3rd Pan American Materials Congress. Cham; 2017. doi:10.1007/978-3-319-52132-9_72' apa: Andreiev, A., Grydin, O., & Schaper, M. (2017). A Rapid Heating Method for Press Hardening Processing. In Proceedings of the 3rd Pan American Materials Congress. Cham. https://doi.org/10.1007/978-3-319-52132-9_72 bibtex: '@inbook{Andreiev_Grydin_Schaper_2017, place={Cham}, title={A Rapid Heating Method for Press Hardening Processing}, DOI={10.1007/978-3-319-52132-9_72}, booktitle={Proceedings of the 3rd Pan American Materials Congress}, author={Andreiev, Anatolii and Grydin, Olexandr and Schaper, Mirko}, year={2017} }' chicago: Andreiev, Anatolii, Olexandr Grydin, and Mirko Schaper. “A Rapid Heating Method for Press Hardening Processing.” In Proceedings of the 3rd Pan American Materials Congress. Cham, 2017. https://doi.org/10.1007/978-3-319-52132-9_72. ieee: A. Andreiev, O. Grydin, and M. Schaper, “A Rapid Heating Method for Press Hardening Processing,” in Proceedings of the 3rd Pan American Materials Congress, Cham, 2017. mla: Andreiev, Anatolii, et al. “A Rapid Heating Method for Press Hardening Processing.” Proceedings of the 3rd Pan American Materials Congress, 2017, doi:10.1007/978-3-319-52132-9_72. short: 'A. Andreiev, O. Grydin, M. Schaper, in: Proceedings of the 3rd Pan American Materials Congress, Cham, 2017.' date_created: 2021-09-08T07:32:09Z date_updated: 2022-01-06T06:56:04Z department: - _id: '158' - _id: '321' doi: 10.1007/978-3-319-52132-9_72 language: - iso: eng place: Cham publication: Proceedings of the 3rd Pan American Materials Congress publication_identifier: issn: - 2367-1181 - 2367-1696 publication_status: published status: public title: A Rapid Heating Method for Press Hardening Processing type: book_chapter user_id: '50215' year: '2017' ... --- _id: '2050' author: - first_name: Dieter full_name: Krimphove, Dieter id: '282' last_name: Krimphove citation: ama: 'Krimphove D. Kommentierung § 3 GWB (Mittelstandskartelle). In: Busche J, Röhling A, eds. Kölner Kommentar Zum Kartellrecht Bd. 1 ( §§ 1 – 34a GWB). Köln: Carl Heymanns Verlag KG; 2017:466 – 538.' apa: 'Krimphove, D. (2017). Kommentierung § 3 GWB (Mittelstandskartelle). In J. Busche & A. Röhling (Eds.), Kölner Kommentar zum Kartellrecht Bd. 1 ( §§ 1 – 34a GWB) (pp. 466 – 538). Köln: Carl Heymanns Verlag KG.' bibtex: '@inbook{Krimphove_2017, place={Köln}, title={Kommentierung § 3 GWB (Mittelstandskartelle)}, booktitle={Kölner Kommentar zum Kartellrecht Bd. 1 ( §§ 1 – 34a GWB)}, publisher={Carl Heymanns Verlag KG}, author={Krimphove, Dieter}, editor={Busche, Jan and Röhling, AndreasEditors}, year={2017}, pages={466 – 538} }' chicago: 'Krimphove, Dieter. “Kommentierung § 3 GWB (Mittelstandskartelle).” In Kölner Kommentar Zum Kartellrecht Bd. 1 ( §§ 1 – 34a GWB), edited by Jan Busche and Andreas Röhling, 466 – 538. Köln: Carl Heymanns Verlag KG, 2017.' ieee: 'D. Krimphove, “Kommentierung § 3 GWB (Mittelstandskartelle),” in Kölner Kommentar zum Kartellrecht Bd. 1 ( §§ 1 – 34a GWB), J. Busche and A. Röhling, Eds. Köln: Carl Heymanns Verlag KG, 2017, pp. 466 – 538.' mla: Krimphove, Dieter. “Kommentierung § 3 GWB (Mittelstandskartelle).” Kölner Kommentar Zum Kartellrecht Bd. 1 ( §§ 1 – 34a GWB), edited by Jan Busche and Andreas Röhling, Carl Heymanns Verlag KG, 2017, pp. 466 – 538. short: 'D. Krimphove, in: J. Busche, A. Röhling (Eds.), Kölner Kommentar Zum Kartellrecht Bd. 1 ( §§ 1 – 34a GWB), Carl Heymanns Verlag KG, Köln, 2017, pp. 466 – 538.' date_created: 2018-03-29T12:52:52Z date_updated: 2022-01-06T06:54:28Z editor: - first_name: Jan full_name: Busche, Jan last_name: Busche - first_name: Andreas full_name: Röhling, Andreas last_name: Röhling page: 466 – 538 place: Köln publication: Kölner Kommentar zum Kartellrecht Bd. 1 ( §§ 1 – 34a GWB) publisher: Carl Heymanns Verlag KG status: public title: Kommentierung § 3 GWB (Mittelstandskartelle) type: book_chapter user_id: '282' year: '2017' ... --- _id: '20552' abstract: - lang: eng text: Das Zukunftsszenario der Industrie 4.0 ist gepr{\"a}gt durch einen massiven Anstieg der unternehmens{\"u}bergreifenden Vernetzung. Um einer Bedrohung durch unautorisierte Weitergabe oder Sabotage vertraulicher Daten entgegenzuwirken, muss der Informationssicherheit bereits im Entwurf der cyber-physischen Produktionssysteme ein hoher Stellenwert einger{\"a}umt werden. Dieses Paradigma wird als Security by Design bezeichnet. {\"U}ber den gesamten Entstehungsprozess hinweg muss nachverfolgt werden k{\"o}nnen, ob die Systeme spezifische Anforderungen an die Informationssicherheit erf{\"u}llen und damit die Eigenschaft der Industrial Security gew{\"a}hrleisten. Dieser Beitrag stellt einen Entwurfsansatz zur Nachverfolgung der Informationssicherheit vor, der durch Integration softwaretechnischer Methoden in das Systems Engineering eine Entwicklung nach dem Paradigma Security by Design erm{\"o}glicht. author: - first_name: Christopher full_name: Gerking, Christopher last_name: Gerking - first_name: Eric full_name: Bodden, Eric id: '59256' last_name: Bodden orcid: 0000-0003-3470-3647 - first_name: Wilhelm full_name: Schäfer, Wilhelm last_name: Schäfer citation: ama: 'Gerking C, Bodden E, Schäfer W. Industrial Security by Design. In: Maier GW, Engels G, Steffen E, eds. Handbuch Gestaltung Digitaler Und Vernetzter Arbeitswelten. Springer Berlin Heidelberg; 2017:1-24. doi:10.1007/978-3-662-52903-4_8-1' apa: Gerking, C., Bodden, E., & Schäfer, W. (2017). Industrial Security by Design. In G. W. Maier, G. Engels, & E. Steffen (Eds.), Handbuch Gestaltung digitaler und vernetzter Arbeitswelten (pp. 1–24). Springer Berlin Heidelberg. https://doi.org/10.1007/978-3-662-52903-4_8-1 bibtex: '@inbook{Gerking_Bodden_Schäfer_2017, place={Berlin, Heidelberg}, title={Industrial Security by Design}, DOI={10.1007/978-3-662-52903-4_8-1}, booktitle={Handbuch Gestaltung digitaler und vernetzter Arbeitswelten}, publisher={Springer Berlin Heidelberg}, author={Gerking, Christopher and Bodden, Eric and Schäfer, Wilhelm}, editor={Maier, Günter W. and Engels, Gregor and Steffen, Eckhard}, year={2017}, pages={1–24} }' chicago: 'Gerking, Christopher, Eric Bodden, and Wilhelm Schäfer. “Industrial Security by Design.” In Handbuch Gestaltung Digitaler Und Vernetzter Arbeitswelten, edited by Günter W. Maier, Gregor Engels, and Eckhard Steffen, 1–24. Berlin, Heidelberg: Springer Berlin Heidelberg, 2017. https://doi.org/10.1007/978-3-662-52903-4_8-1.' ieee: 'C. Gerking, E. Bodden, and W. Schäfer, “Industrial Security by Design,” in Handbuch Gestaltung digitaler und vernetzter Arbeitswelten, G. W. Maier, G. Engels, and E. Steffen, Eds. Berlin, Heidelberg: Springer Berlin Heidelberg, 2017, pp. 1–24.' mla: Gerking, Christopher, et al. “Industrial Security by Design.” Handbuch Gestaltung Digitaler Und Vernetzter Arbeitswelten, edited by Günter W. Maier et al., Springer Berlin Heidelberg, 2017, pp. 1–24, doi:10.1007/978-3-662-52903-4_8-1. short: 'C. Gerking, E. Bodden, W. Schäfer, in: G.W. Maier, G. Engels, E. Steffen (Eds.), Handbuch Gestaltung Digitaler Und Vernetzter Arbeitswelten, Springer Berlin Heidelberg, Berlin, Heidelberg, 2017, pp. 1–24.' date_created: 2020-11-30T09:56:23Z date_updated: 2022-01-06T06:54:29Z department: - _id: '76' doi: 10.1007/978-3-662-52903-4_8-1 editor: - first_name: Günter W. full_name: Maier, Günter W. last_name: Maier - first_name: Gregor full_name: Engels, Gregor last_name: Engels - first_name: Eckhard full_name: Steffen, Eckhard last_name: Steffen keyword: - ITSECWEBSITE language: - iso: eng page: 1-24 place: Berlin, Heidelberg publication: Handbuch Gestaltung digitaler und vernetzter Arbeitswelten publication_identifier: isbn: - 978-3-662-52903-4 publisher: Springer Berlin Heidelberg status: public title: Industrial Security by Design type: book_chapter user_id: '5786' year: '2017' ... --- _id: '20792' author: - first_name: Stefano full_name: Schivo, Stefano last_name: Schivo - first_name: Bugra M. full_name: Yildiz., Bugra M. last_name: Yildiz. - first_name: Enno full_name: Ruijters, Enno last_name: Ruijters - first_name: Christopher full_name: Gerking, Christopher last_name: Gerking - first_name: Rajesh full_name: Kumar, Rajesh last_name: Kumar - first_name: Stefan full_name: Dziwok, Stefan id: '3901' last_name: Dziwok orcid: http://orcid.org/0000-0002-8679-6673 - first_name: Arend full_name: Rensink, Arend last_name: Rensink - first_name: Mariëlle full_name: Stoelinga, Mariëlle last_name: Stoelinga citation: ama: 'Schivo S, Yildiz. BM, Ruijters E, et al. How to Efficiently Build a Front-End Tool for UPPAAL: A Model-Driven Approach. In: Larsen KG, Sokolsky O, Wang J, eds. Dependable Software Engineering, 3rd International Symposium (SETTA 2017). Lecture Notes in Computer Science. Springer; 2017:319-336. doi:10.1007/978-3-319-69483-2_19' apa: 'Schivo, S., Yildiz., B. M., Ruijters, E., Gerking, C., Kumar, R., Dziwok, S., Rensink, A., & Stoelinga, M. (2017). How to Efficiently Build a Front-End Tool for UPPAAL: A Model-Driven Approach. In K. G. Larsen, O. Sokolsky, & J. Wang (Eds.), Dependable Software Engineering, 3rd International Symposium (SETTA 2017) (Issue 10606, pp. 319–336). Springer. https://doi.org/10.1007/978-3-319-69483-2_19' bibtex: '@inproceedings{Schivo_Yildiz._Ruijters_Gerking_Kumar_Dziwok_Rensink_Stoelinga_2017, place={Changsha}, series={Lecture Notes in Computer Science}, title={How to Efficiently Build a Front-End Tool for UPPAAL: A Model-Driven Approach}, DOI={10.1007/978-3-319-69483-2_19}, number={10606}, booktitle={Dependable Software Engineering, 3rd International Symposium (SETTA 2017)}, publisher={Springer}, author={Schivo, Stefano and Yildiz., Bugra M. and Ruijters, Enno and Gerking, Christopher and Kumar, Rajesh and Dziwok, Stefan and Rensink, Arend and Stoelinga, Mariëlle}, editor={Larsen, Kim G. and Sokolsky, Oleg and Wang, Ji}, year={2017}, pages={319–336}, collection={Lecture Notes in Computer Science} }' chicago: 'Schivo, Stefano, Bugra M. Yildiz., Enno Ruijters, Christopher Gerking, Rajesh Kumar, Stefan Dziwok, Arend Rensink, and Mariëlle Stoelinga. “How to Efficiently Build a Front-End Tool for UPPAAL: A Model-Driven Approach.” In Dependable Software Engineering, 3rd International Symposium (SETTA 2017), edited by Kim G. Larsen, Oleg Sokolsky, and Ji Wang, 319–36. Lecture Notes in Computer Science. Changsha: Springer, 2017. https://doi.org/10.1007/978-3-319-69483-2_19.' ieee: 'S. Schivo et al., “How to Efficiently Build a Front-End Tool for UPPAAL: A Model-Driven Approach,” in Dependable Software Engineering, 3rd International Symposium (SETTA 2017), 2017, no. 10606, pp. 319–336, doi: 10.1007/978-3-319-69483-2_19.' mla: 'Schivo, Stefano, et al. “How to Efficiently Build a Front-End Tool for UPPAAL: A Model-Driven Approach.” Dependable Software Engineering, 3rd International Symposium (SETTA 2017), edited by Kim G. Larsen et al., no. 10606, Springer, 2017, pp. 319–36, doi:10.1007/978-3-319-69483-2_19.' short: 'S. Schivo, B.M. Yildiz., E. Ruijters, C. Gerking, R. Kumar, S. Dziwok, A. Rensink, M. Stoelinga, in: K.G. Larsen, O. Sokolsky, J. Wang (Eds.), Dependable Software Engineering, 3rd International Symposium (SETTA 2017), Springer, Changsha, 2017, pp. 319–336.' date_created: 2020-12-17T13:30:15Z date_updated: 2022-01-06T06:54:38Z department: - _id: '76' - _id: '241' doi: 10.1007/978-3-319-69483-2_19 editor: - first_name: Kim G. full_name: Larsen, Kim G. last_name: Larsen - first_name: Oleg full_name: Sokolsky, Oleg last_name: Sokolsky - first_name: Ji full_name: Wang, Ji last_name: Wang issue: '10606' language: - iso: eng page: 319-336 place: Changsha publication: Dependable Software Engineering, 3rd International Symposium (SETTA 2017) publisher: Springer series_title: Lecture Notes in Computer Science status: public title: 'How to Efficiently Build a Front-End Tool for UPPAAL: A Model-Driven Approach' type: conference user_id: '5786' year: '2017' ... --- _id: '18026' author: - first_name: 'Michél ' full_name: 'Burkhardt, Michél ' last_name: Burkhardt citation: ama: Burkhardt M. Untersuchungen Zum Cone-Hashing. Universität Paderborn; 2017. apa: Burkhardt, M. (2017). Untersuchungen zum Cone-Hashing. Universität Paderborn. bibtex: '@book{Burkhardt_2017, title={Untersuchungen zum Cone-Hashing}, publisher={Universität Paderborn}, author={Burkhardt, Michél }, year={2017} }' chicago: Burkhardt, Michél . Untersuchungen Zum Cone-Hashing. Universität Paderborn, 2017. ieee: M. Burkhardt, Untersuchungen zum Cone-Hashing. Universität Paderborn, 2017. mla: Burkhardt, Michél. Untersuchungen Zum Cone-Hashing. Universität Paderborn, 2017. short: M. Burkhardt, Untersuchungen Zum Cone-Hashing, Universität Paderborn, 2017. date_created: 2020-08-18T08:39:19Z date_updated: 2022-01-06T06:53:25Z department: - _id: '79' language: - iso: eng project: - _id: '1' name: SFB 901 - _id: '2' name: SFB 901 - Project Area A - _id: '5' name: SFB 901 - Subproject A1 publisher: Universität Paderborn status: public supervisor: - first_name: Christian full_name: Scheideler, Christian id: '20792' last_name: Scheideler title: Untersuchungen zum Cone-Hashing type: bachelorsthesis user_id: '477' year: '2017' ... --- _id: '18028' author: - first_name: Andreas full_name: Schenk, Andreas last_name: Schenk citation: ama: Schenk A. Monotone Suchbarkeit in Mehrdimensionalen Verteilten Datenstrukturen. Universität Paderborn; 2017. apa: Schenk, A. (2017). Monotone Suchbarkeit in mehrdimensionalen verteilten Datenstrukturen. Universität Paderborn. bibtex: '@book{Schenk_2017, title={Monotone Suchbarkeit in mehrdimensionalen verteilten Datenstrukturen}, publisher={Universität Paderborn}, author={Schenk, Andreas}, year={2017} }' chicago: Schenk, Andreas. Monotone Suchbarkeit in Mehrdimensionalen Verteilten Datenstrukturen. Universität Paderborn, 2017. ieee: A. Schenk, Monotone Suchbarkeit in mehrdimensionalen verteilten Datenstrukturen. Universität Paderborn, 2017. mla: Schenk, Andreas. Monotone Suchbarkeit in Mehrdimensionalen Verteilten Datenstrukturen. Universität Paderborn, 2017. short: A. Schenk, Monotone Suchbarkeit in Mehrdimensionalen Verteilten Datenstrukturen, Universität Paderborn, 2017. date_created: 2020-08-18T08:41:42Z date_updated: 2022-01-06T06:53:25Z department: - _id: '79' language: - iso: eng project: - _id: '1' name: SFB 901 - _id: '5' name: SFB 901 - Subproject A1 - _id: '2' name: SFB 901 - Project Area A publisher: Universität Paderborn status: public supervisor: - first_name: Christian full_name: Scheideler, Christian id: '20792' last_name: Scheideler title: Monotone Suchbarkeit in mehrdimensionalen verteilten Datenstrukturen type: bachelorsthesis user_id: '477' year: '2017' ... --- _id: '18029' author: - first_name: Björn full_name: Beckendorf, Björn last_name: Beckendorf citation: ama: Beckendorf B. Visualisierung Zu Algorithmen Verteilter Netzwerksysteme. Universität Paderborn; 2017. apa: Beckendorf, B. (2017). Visualisierung zu Algorithmen verteilter Netzwerksysteme. Universität Paderborn. bibtex: '@book{Beckendorf_2017, title={Visualisierung zu Algorithmen verteilter Netzwerksysteme}, publisher={Universität Paderborn}, author={Beckendorf, Björn}, year={2017} }' chicago: Beckendorf, Björn. Visualisierung Zu Algorithmen Verteilter Netzwerksysteme. Universität Paderborn, 2017. ieee: B. Beckendorf, Visualisierung zu Algorithmen verteilter Netzwerksysteme. Universität Paderborn, 2017. mla: Beckendorf, Björn. Visualisierung Zu Algorithmen Verteilter Netzwerksysteme. Universität Paderborn, 2017. short: B. Beckendorf, Visualisierung Zu Algorithmen Verteilter Netzwerksysteme, Universität Paderborn, 2017. date_created: 2020-08-18T08:42:36Z date_updated: 2022-01-06T06:53:25Z department: - _id: '79' language: - iso: eng project: - _id: '1' name: SFB 901 - _id: '2' name: SFB 901 - Project Area A - _id: '5' name: SFB 901 - Subproject A1 publisher: Universität Paderborn status: public supervisor: - first_name: Christian full_name: Scheideler, Christian id: '20792' last_name: Scheideler title: Visualisierung zu Algorithmen verteilter Netzwerksysteme type: bachelorsthesis user_id: '477' year: '2017' ... --- _id: '1815' author: - first_name: Joshua full_name: J. Daymude, Joshua last_name: J. Daymude - first_name: Robert full_name: Gmyr, Robert last_name: Gmyr - first_name: Andrea full_name: W. Richa, Andrea last_name: W. Richa - first_name: Christian full_name: Scheideler, Christian id: '20792' last_name: Scheideler - first_name: Thim Frederik full_name: Strothmann, Thim Frederik id: '11319' last_name: Strothmann citation: ama: 'J. Daymude J, Gmyr R, W. Richa A, Scheideler C, Strothmann TF. Improved Leader Election for Self-organizing Programmable Matter. In: Algorithms for Sensor Systems - 13th International Symposium on Algorithms and Experiments for Wireless Sensor Networks, ALGOSENSORS 2017, Vienna, Austria, September 7-8, 2017, Revised Selected Papers. ; 2017:127--140. doi:10.1007/978-3-319-72751-6_10' apa: J. Daymude, J., Gmyr, R., W. Richa, A., Scheideler, C., & Strothmann, T. F. (2017). Improved Leader Election for Self-organizing Programmable Matter. In Algorithms for Sensor Systems - 13th International Symposium on Algorithms and Experiments for Wireless Sensor Networks, ALGOSENSORS 2017, Vienna, Austria, September 7-8, 2017, Revised Selected Papers (pp. 127--140). https://doi.org/10.1007/978-3-319-72751-6_10 bibtex: '@inproceedings{J. Daymude_Gmyr_W. Richa_Scheideler_Strothmann_2017, title={Improved Leader Election for Self-organizing Programmable Matter}, DOI={10.1007/978-3-319-72751-6_10}, booktitle={Algorithms for Sensor Systems - 13th International Symposium on Algorithms and Experiments for Wireless Sensor Networks, ALGOSENSORS 2017, Vienna, Austria, September 7-8, 2017, Revised Selected Papers}, author={J. Daymude, Joshua and Gmyr, Robert and W. Richa, Andrea and Scheideler, Christian and Strothmann, Thim Frederik}, year={2017}, pages={127--140} }' chicago: J. Daymude, Joshua, Robert Gmyr, Andrea W. Richa, Christian Scheideler, and Thim Frederik Strothmann. “Improved Leader Election for Self-Organizing Programmable Matter.” In Algorithms for Sensor Systems - 13th International Symposium on Algorithms and Experiments for Wireless Sensor Networks, ALGOSENSORS 2017, Vienna, Austria, September 7-8, 2017, Revised Selected Papers, 127--140, 2017. https://doi.org/10.1007/978-3-319-72751-6_10. ieee: J. J. Daymude, R. Gmyr, A. W. Richa, C. Scheideler, and T. F. Strothmann, “Improved Leader Election for Self-organizing Programmable Matter,” in Algorithms for Sensor Systems - 13th International Symposium on Algorithms and Experiments for Wireless Sensor Networks, ALGOSENSORS 2017, Vienna, Austria, September 7-8, 2017, Revised Selected Papers, 2017, pp. 127--140. mla: J. Daymude, Joshua, et al. “Improved Leader Election for Self-Organizing Programmable Matter.” Algorithms for Sensor Systems - 13th International Symposium on Algorithms and Experiments for Wireless Sensor Networks, ALGOSENSORS 2017, Vienna, Austria, September 7-8, 2017, Revised Selected Papers, 2017, pp. 127--140, doi:10.1007/978-3-319-72751-6_10. short: 'J. J. Daymude, R. Gmyr, A. W. Richa, C. Scheideler, T.F. Strothmann, in: Algorithms for Sensor Systems - 13th International Symposium on Algorithms and Experiments for Wireless Sensor Networks, ALGOSENSORS 2017, Vienna, Austria, September 7-8, 2017, Revised Selected Papers, 2017, pp. 127--140.' date_created: 2018-03-27T11:25:58Z date_updated: 2022-01-06T06:53:26Z department: - _id: '79' doi: 10.1007/978-3-319-72751-6_10 language: - iso: eng page: 127--140 publication: Algorithms for Sensor Systems - 13th International Symposium on Algorithms and Experiments for Wireless Sensor Networks, ALGOSENSORS 2017, Vienna, Austria, September 7-8, 2017, Revised Selected Papers status: public title: Improved Leader Election for Self-organizing Programmable Matter type: conference user_id: '15504' year: '2017' ... --- _id: '22419' abstract: - lang: eng text: Schwingungen und Vibrationen sind in Technik und Alltag häufig anzutreffen. Meist sind sie unerwünscht und müssen durch Dämpfung reduziert werden. Hierzu werden aktuell häufig zusätzlich zu montierende Dämpfungselemente eingesetzt. Diese sind durch zusätzlichen Montageaufwand und erhöhte Kosten gekennzeichnet. Durch die zusätzliche Masse wird Leichtbauansätzen widersprochen. Additive Fertigungsverfahren bieten große Freiheiten in der Bauteilgestaltung. Dies ermöglicht ein hohes Maß an Funktionsintegration. So ergeben sich auch im Bereich der Schwingungsdämpfung Möglichkeiten zur gezielten Integration von Dämpfungsfunktionen durch die Eigenschaften der additiven Fertigungsverfahren. Mittels der pulverbasierten Verfahren kann disperses Stützmaterial innerhalb von Hohlräumen in der Struktur belassen werden. Dieses Pulvermaterial kann als Partikeldämpfer fungieren. Durch die Freiheiten in der Bauteilgestalt kann die Dämpfungswirkung über die geometrischen Merkmale der Hohlräume gezielt eingestellt werden. Im Rahmen dieses Beitrags werden speziell Untersuchungen zur Dämpfungswirkung additiv gefertigter Bauteile bei freien Biegeschwingungen betrachtet. Die praxisnahe Umsetzung zur Funktionsintegration von Dämpfungsstrukturen erfolgt am Beispiel der Ankerscheibe einer Federkraftbremse. Hier kann durch die additive Fertigung verbunden mit der Funktionsintegration von Partikeldämpfern eine Reduzierung der Schallabstrahlung für den Schaltvorgang der Bremse erreicht werden. author: - first_name: Thomas full_name: Künneke, Thomas id: '13226' last_name: Künneke - first_name: Detmar full_name: Zimmer, Detmar id: '604' last_name: Zimmer citation: ama: Künneke T, Zimmer D. Funktionsintegration Additiv Gefertigter Dämpfungsstrukturen Bei Biegeschwingungen. Springer Fachmedien Wiesbaden GmbH; 2017:61-74. doi:10.1007/978-3-658-17780-5 apa: Künneke, T., & Zimmer, D. (2017). Funktionsintegration additiv gefertigter Dämpfungsstrukturen bei Biegeschwingungen (pp. 61–74). Springer Fachmedien Wiesbaden GmbH. https://doi.org/10.1007/978-3-658-17780-5 bibtex: '@book{Künneke_Zimmer_2017, title={Funktionsintegration additiv gefertigter Dämpfungsstrukturen bei Biegeschwingungen}, DOI={10.1007/978-3-658-17780-5}, publisher={Springer Fachmedien Wiesbaden GmbH}, author={Künneke, Thomas and Zimmer, Detmar}, year={2017}, pages={61–74} }' chicago: Künneke, Thomas, and Detmar Zimmer. Funktionsintegration Additiv Gefertigter Dämpfungsstrukturen Bei Biegeschwingungen. Springer Fachmedien Wiesbaden GmbH, 2017. https://doi.org/10.1007/978-3-658-17780-5. ieee: T. Künneke and D. Zimmer, Funktionsintegration additiv gefertigter Dämpfungsstrukturen bei Biegeschwingungen. Springer Fachmedien Wiesbaden GmbH, 2017, pp. 61–74. mla: Künneke, Thomas, and Detmar Zimmer. Funktionsintegration Additiv Gefertigter Dämpfungsstrukturen Bei Biegeschwingungen. Springer Fachmedien Wiesbaden GmbH, 2017, pp. 61–74, doi:10.1007/978-3-658-17780-5. short: T. Künneke, D. Zimmer, Funktionsintegration Additiv Gefertigter Dämpfungsstrukturen Bei Biegeschwingungen, Springer Fachmedien Wiesbaden GmbH, 2017. date_created: 2021-06-15T11:09:49Z date_updated: 2022-01-06T06:55:32Z department: - _id: '9' - _id: '146' - _id: '219' - _id: '624' doi: 10.1007/978-3-658-17780-5 language: - iso: eng page: 61-74 publication_identifier: isbn: - 978-3-658-17780-5 publisher: Springer Fachmedien Wiesbaden GmbH status: public title: Funktionsintegration additiv gefertigter Dämpfungsstrukturen bei Biegeschwingungen type: book user_id: '38077' year: '2017' ... --- _id: '22420' abstract: - lang: eng text: 'Additive Fertigungsverfahren (engl.: Additive Manufacturing, kurz: AM) ermöglichen die werkzeuglose Herstellung von Komponenten und kompletten Baugruppen direkt aus dem 3D-CAD-Modell. Insbesondere additiv hergestellte Leichtbaukonstruktionen weisen ein hohes Potential für den Elektromaschinenbau auf. In diesem Paper werden erste Ansätze zur additiven Fertigung einer Rotorwelle für eine permanentmagneterregte Synchronmaschine (PMSM) aufgezeigt. Die Verbesserung einer ausgeprägten Leichtbaukonstruktion der Rotorwelle sowie die Charakterisierung des additiv verarbeiteten Werkstoffs werden aufgeführt. Hierzu wurden Prüfkörper aus dem Werkstoffs H13 (1.2344) hergestellt. Des Weiteren wurden Prüfkörper additiv gefertigter Gitterstrukturen entwickelt und untersucht. Zur Werkstoffcharakterisierung wurden sowohl mechanische Eigenschaften ermittelt, wie die Streckgrenze, die Zugfestigkeit und die Härte als auch elektromagnetische Eigenschaften, wie die Koerzitivfeldstärke, die elektrische Leitfähigkeit und die Permeabilität. Die Ergebnisse zeigen, dass die magnetischen Eigenschaften von H13 durch eine angeschlossene Wärmebehandlung deutlich verbessert werden konnten. Im Anschluss an die Werkstoffcharakterisierung wurde ein innovatives Leichtbau-Rotorwellenkonzept mit internen Gitterstrukturen entwickelt. Verglichen mit einem konventionell gefertigten Rotor konnte die Rotormasse um 25% reduziert werden sowie das Massenträgheitsmoment um 23% reduziert werden bei einer Testdrehzahl von 3000 U/min und einem Drehmoment von 71,98 Nm.' author: - first_name: Stefan full_name: Lammers, Stefan id: '13835' last_name: Lammers - first_name: Francesco full_name: Quattrone, Francesco last_name: Quattrone - first_name: Rafael full_name: Mrozek, Rafael last_name: Mrozek - first_name: Detmar full_name: Zimmer, Detmar id: '604' last_name: Zimmer - first_name: Hans-Joachim full_name: Schmid, Hans-Joachim last_name: Schmid - first_name: Bernd full_name: Ponick, Bernd last_name: Ponick - first_name: Michael full_name: Hoffmann, Michael last_name: Hoffmann citation: ama: 'Lammers S, Quattrone F, Mrozek R, et al. Entwicklung und additive Herstellung einer Leichtbau-Rotorwelle für eine permanentmagneterregte Synchronmaschine. In: Proceedings of the 14th Rapid.Tech Conference. Hanser Verlag; 2017:80-93. doi:10.3139/9783446454606.006' apa: Lammers, S., Quattrone, F., Mrozek, R., Zimmer, D., Schmid, H.-J., Ponick, B., & Hoffmann, M. (2017). Entwicklung und additive Herstellung einer Leichtbau-Rotorwelle für eine permanentmagneterregte Synchronmaschine. In Proceedings of the 14th Rapid.Tech Conference (pp. 80–93). Hanser Verlag. https://doi.org/10.3139/9783446454606.006 bibtex: '@inproceedings{Lammers_Quattrone_Mrozek_Zimmer_Schmid_Ponick_Hoffmann_2017, title={Entwicklung und additive Herstellung einer Leichtbau-Rotorwelle für eine permanentmagneterregte Synchronmaschine}, DOI={10.3139/9783446454606.006}, booktitle={Proceedings of the 14th Rapid.Tech Conference}, publisher={Hanser Verlag}, author={Lammers, Stefan and Quattrone, Francesco and Mrozek, Rafael and Zimmer, Detmar and Schmid, Hans-Joachim and Ponick, Bernd and Hoffmann, Michael}, year={2017}, pages={80–93} }' chicago: Lammers, Stefan, Francesco Quattrone, Rafael Mrozek, Detmar Zimmer, Hans-Joachim Schmid, Bernd Ponick, and Michael Hoffmann. “Entwicklung Und Additive Herstellung Einer Leichtbau-Rotorwelle Für Eine Permanentmagneterregte Synchronmaschine.” In Proceedings of the 14th Rapid.Tech Conference, 80–93. Hanser Verlag, 2017. https://doi.org/10.3139/9783446454606.006. ieee: S. Lammers et al., “Entwicklung und additive Herstellung einer Leichtbau-Rotorwelle für eine permanentmagneterregte Synchronmaschine,” in Proceedings of the 14th Rapid.Tech Conference, 2017, pp. 80–93. mla: Lammers, Stefan, et al. “Entwicklung Und Additive Herstellung Einer Leichtbau-Rotorwelle Für Eine Permanentmagneterregte Synchronmaschine.” Proceedings of the 14th Rapid.Tech Conference, Hanser Verlag, 2017, pp. 80–93, doi:10.3139/9783446454606.006. short: 'S. Lammers, F. Quattrone, R. Mrozek, D. Zimmer, H.-J. Schmid, B. Ponick, M. Hoffmann, in: Proceedings of the 14th Rapid.Tech Conference, Hanser Verlag, 2017, pp. 80–93.' date_created: 2021-06-15T11:09:50Z date_updated: 2022-01-06T06:55:32Z department: - _id: '9' - _id: '146' - _id: '219' - _id: '624' doi: 10.3139/9783446454606.006 language: - iso: eng page: 80-93 publication: Proceedings of the 14th Rapid.Tech Conference publication_identifier: isbn: - 978-3-446-45459-0 publisher: Hanser Verlag status: public title: Entwicklung und additive Herstellung einer Leichtbau-Rotorwelle für eine permanentmagneterregte Synchronmaschine type: conference user_id: '38077' year: '2017' ... --- _id: '22421' author: - first_name: Tobias full_name: Lieneke, Tobias id: '13956' last_name: Lieneke - first_name: Guido full_name: Adam, Guido last_name: Adam - first_name: Stefan full_name: Josupeit, Stefan last_name: Josupeit - first_name: Patrick full_name: Delfs, Patrick last_name: Delfs - first_name: Detmar full_name: Zimmer, Detmar id: '604' last_name: Zimmer citation: ama: 'Lieneke T, Adam G, Josupeit S, Delfs P, Zimmer D. Maßtoleranzen für die additive Fertigung: Experimentelle Untersuchungen für das Lasersintern. In: Proceedings of the 14th Rapid.Tech Conference. Hanser Verlag; 2017:327-344. doi:10.3139/9783446454606.024 ' apa: 'Lieneke, T., Adam, G., Josupeit, S., Delfs, P., & Zimmer, D. (2017). Maßtoleranzen für die additive Fertigung: Experimentelle Untersuchungen für das Lasersintern. In Proceedings of the 14th Rapid.Tech Conference (pp. 327–344). Hanser Verlag. https://doi.org/10.3139/9783446454606.024 ' bibtex: '@inproceedings{Lieneke_Adam_Josupeit_Delfs_Zimmer_2017, title={Maßtoleranzen für die additive Fertigung: Experimentelle Untersuchungen für das Lasersintern}, DOI={10.3139/9783446454606.024 }, booktitle={Proceedings of the 14th Rapid.Tech Conference}, publisher={Hanser Verlag}, author={Lieneke, Tobias and Adam, Guido and Josupeit, Stefan and Delfs, Patrick and Zimmer, Detmar}, year={2017}, pages={327–344} }' chicago: 'Lieneke, Tobias, Guido Adam, Stefan Josupeit, Patrick Delfs, and Detmar Zimmer. “Maßtoleranzen Für Die Additive Fertigung: Experimentelle Untersuchungen Für Das Lasersintern.” In Proceedings of the 14th Rapid.Tech Conference, 327–44. Hanser Verlag, 2017. https://doi.org/10.3139/9783446454606.024 .' ieee: 'T. Lieneke, G. Adam, S. Josupeit, P. Delfs, and D. Zimmer, “Maßtoleranzen für die additive Fertigung: Experimentelle Untersuchungen für das Lasersintern,” in Proceedings of the 14th Rapid.Tech Conference, 2017, pp. 327–344.' mla: 'Lieneke, Tobias, et al. “Maßtoleranzen Für Die Additive Fertigung: Experimentelle Untersuchungen Für Das Lasersintern.” Proceedings of the 14th Rapid.Tech Conference, Hanser Verlag, 2017, pp. 327–44, doi:10.3139/9783446454606.024 .' short: 'T. Lieneke, G. Adam, S. Josupeit, P. Delfs, D. Zimmer, in: Proceedings of the 14th Rapid.Tech Conference, Hanser Verlag, 2017, pp. 327–344.' date_created: 2021-06-15T11:09:51Z date_updated: 2022-01-06T06:55:32Z department: - _id: '9' - _id: '146' - _id: '219' - _id: '624' - _id: '150' doi: '10.3139/9783446454606.024 ' language: - iso: eng page: 327-344 publication: Proceedings of the 14th Rapid.Tech Conference publication_identifier: isbn: - 978-3-446-45460-6 publisher: Hanser Verlag status: public title: 'Maßtoleranzen für die additive Fertigung: Experimentelle Untersuchungen für das Lasersintern' type: conference user_id: '38077' year: '2017' ... --- _id: '22425' author: - first_name: Tobias full_name: Lieneke, Tobias id: '13956' last_name: Lieneke - first_name: Vera full_name: Denzer, Vera last_name: Denzer - first_name: Detmar full_name: Zimmer, Detmar id: '604' last_name: Zimmer citation: ama: 'Lieneke T, Denzer V, Zimmer D. Geometrische Toleranzen für additive Fertigungsverfahren. In: 3. Summer School Toleranzmangement 2017. Vol 3. ; 2017.' apa: Lieneke, T., Denzer, V., & Zimmer, D. (2017). Geometrische Toleranzen für additive Fertigungsverfahren. In 3. Summer School Toleranzmangement 2017 (Vol. 3). bibtex: '@inproceedings{Lieneke_Denzer_Zimmer_2017, title={Geometrische Toleranzen für additive Fertigungsverfahren}, volume={3}, booktitle={3. Summer School Toleranzmangement 2017}, author={Lieneke, Tobias and Denzer, Vera and Zimmer, Detmar}, year={2017} }' chicago: Lieneke, Tobias, Vera Denzer, and Detmar Zimmer. “Geometrische Toleranzen Für Additive Fertigungsverfahren.” In 3. Summer School Toleranzmangement 2017, Vol. 3, 2017. ieee: T. Lieneke, V. Denzer, and D. Zimmer, “Geometrische Toleranzen für additive Fertigungsverfahren,” in 3. Summer School Toleranzmangement 2017, 2017, vol. 3. mla: Lieneke, Tobias, et al. “Geometrische Toleranzen Für Additive Fertigungsverfahren.” 3. Summer School Toleranzmangement 2017, vol. 3, 2017. short: 'T. Lieneke, V. Denzer, D. Zimmer, in: 3. Summer School Toleranzmangement 2017, 2017.' date_created: 2021-06-15T11:09:56Z date_updated: 2022-01-06T06:55:32Z department: - _id: '9' - _id: '146' - _id: '219' - _id: '624' intvolume: ' 3' language: - iso: eng publication: 3. Summer School Toleranzmangement 2017 status: public title: Geometrische Toleranzen für additive Fertigungsverfahren type: conference user_id: '38077' volume: 3 year: '2017' ... --- _id: '22429' author: - first_name: Christian full_name: Lessmeier, Christian last_name: Lessmeier citation: ama: Lessmeier C. Datenbasierte Zustandsüberwachung von Wälzlagerschäden in Elektromechanischen Antriebssystemen. Shaker Verlag GmbH ; 2017. apa: Lessmeier, C. (2017). Datenbasierte Zustandsüberwachung von Wälzlagerschäden in elektromechanischen Antriebssystemen. Shaker Verlag GmbH . bibtex: '@book{Lessmeier_2017, title={Datenbasierte Zustandsüberwachung von Wälzlagerschäden in elektromechanischen Antriebssystemen}, publisher={Shaker Verlag GmbH }, author={Lessmeier, Christian}, year={2017} }' chicago: Lessmeier, Christian. Datenbasierte Zustandsüberwachung von Wälzlagerschäden in Elektromechanischen Antriebssystemen. Shaker Verlag GmbH , 2017. ieee: C. Lessmeier, Datenbasierte Zustandsüberwachung von Wälzlagerschäden in elektromechanischen Antriebssystemen. Shaker Verlag GmbH , 2017. mla: Lessmeier, Christian. Datenbasierte Zustandsüberwachung von Wälzlagerschäden in Elektromechanischen Antriebssystemen. Shaker Verlag GmbH , 2017. short: C. Lessmeier, Datenbasierte Zustandsüberwachung von Wälzlagerschäden in Elektromechanischen Antriebssystemen, Shaker Verlag GmbH , 2017. date_created: 2021-06-15T11:10:01Z date_updated: 2022-01-06T06:55:32Z department: - _id: '9' - _id: '146' language: - iso: eng publication_identifier: isbn: - 978-3-8440-5490-3 publisher: 'Shaker Verlag GmbH ' status: public title: Datenbasierte Zustandsüberwachung von Wälzlagerschäden in elektromechanischen Antriebssystemen type: dissertation user_id: '38077' year: '2017' ... --- _id: '22669' author: - first_name: Bastian full_name: Mosebach, Bastian last_name: Mosebach - first_name: Berkem full_name: Ozkaya, Berkem last_name: Ozkaya - first_name: Ignacio full_name: Giner, Ignacio last_name: Giner - first_name: Adrian full_name: Keller, Adrian id: '48864' last_name: Keller orcid: 0000-0001-7139-3110 - first_name: Guido full_name: Grundmeier, Guido id: '194' last_name: Grundmeier citation: ama: Mosebach B, Ozkaya B, Giner I, Keller A, Grundmeier G. Analysis of acid-base interactions at Al 2 O 3 (11-20) interfaces by means of single molecule force spectroscopy. Applied Surface Science. 2017;420:296-302. doi:10.1016/j.apsusc.2017.05.105 apa: Mosebach, B., Ozkaya, B., Giner, I., Keller, A., & Grundmeier, G. (2017). Analysis of acid-base interactions at Al 2 O 3 (11-20) interfaces by means of single molecule force spectroscopy. Applied Surface Science, 420, 296–302. https://doi.org/10.1016/j.apsusc.2017.05.105 bibtex: '@article{Mosebach_Ozkaya_Giner_Keller_Grundmeier_2017, title={Analysis of acid-base interactions at Al 2 O 3 (11-20) interfaces by means of single molecule force spectroscopy}, volume={420}, DOI={10.1016/j.apsusc.2017.05.105}, journal={Applied Surface Science}, author={Mosebach, Bastian and Ozkaya, Berkem and Giner, Ignacio and Keller, Adrian and Grundmeier, Guido}, year={2017}, pages={296–302} }' chicago: 'Mosebach, Bastian, Berkem Ozkaya, Ignacio Giner, Adrian Keller, and Guido Grundmeier. “Analysis of Acid-Base Interactions at Al 2 O 3 (11-20) Interfaces by Means of Single Molecule Force Spectroscopy.” Applied Surface Science 420 (2017): 296–302. https://doi.org/10.1016/j.apsusc.2017.05.105.' ieee: B. Mosebach, B. Ozkaya, I. Giner, A. Keller, and G. Grundmeier, “Analysis of acid-base interactions at Al 2 O 3 (11-20) interfaces by means of single molecule force spectroscopy,” Applied Surface Science, vol. 420, pp. 296–302, 2017. mla: Mosebach, Bastian, et al. “Analysis of Acid-Base Interactions at Al 2 O 3 (11-20) Interfaces by Means of Single Molecule Force Spectroscopy.” Applied Surface Science, vol. 420, 2017, pp. 296–302, doi:10.1016/j.apsusc.2017.05.105. short: B. Mosebach, B. Ozkaya, I. Giner, A. Keller, G. Grundmeier, Applied Surface Science 420 (2017) 296–302. date_created: 2021-07-08T12:39:31Z date_updated: 2022-01-06T06:55:38Z department: - _id: '302' doi: 10.1016/j.apsusc.2017.05.105 intvolume: ' 420' language: - iso: eng page: 296-302 publication: Applied Surface Science publication_identifier: issn: - 0169-4332 publication_status: published status: public title: Analysis of acid-base interactions at Al 2 O 3 (11-20) interfaces by means of single molecule force spectroscopy type: journal_article user_id: '48864' volume: 420 year: '2017' ... --- _id: '22848' abstract: - lang: eng text:

Heteroleptic and homoleptic In(iii)-amidinate complexes as promising CVD precursors for In2O3 thin films.

author: - first_name: M. full_name: Gebhard, M. last_name: Gebhard - first_name: M. full_name: Hellwig, M. last_name: Hellwig - first_name: A. full_name: Kroll, A. last_name: Kroll - first_name: D. full_name: Rogalla, D. last_name: Rogalla - first_name: M. full_name: Winter, M. last_name: Winter - first_name: B. full_name: Mallick, B. last_name: Mallick - first_name: A. full_name: Ludwig, A. last_name: Ludwig - first_name: M. full_name: Wiesing, M. last_name: Wiesing - first_name: A. D. full_name: Wieck, A. D. last_name: Wieck - first_name: Guido full_name: Grundmeier, Guido id: '194' last_name: Grundmeier - first_name: A. full_name: Devi, A. last_name: Devi citation: ama: 'Gebhard M, Hellwig M, Kroll A, et al. New amidinate complexes of indium(iii): promising CVD precursors for transparent and conductive In2O3 thin films. Dalton Transactions. 2017:10220-10231. doi:10.1039/c7dt01280b' apa: 'Gebhard, M., Hellwig, M., Kroll, A., Rogalla, D., Winter, M., Mallick, B., … Devi, A. (2017). New amidinate complexes of indium(iii): promising CVD precursors for transparent and conductive In2O3 thin films. Dalton Transactions, 10220–10231. https://doi.org/10.1039/c7dt01280b' bibtex: '@article{Gebhard_Hellwig_Kroll_Rogalla_Winter_Mallick_Ludwig_Wiesing_Wieck_Grundmeier_et al._2017, title={New amidinate complexes of indium(iii): promising CVD precursors for transparent and conductive In2O3 thin films}, DOI={10.1039/c7dt01280b}, journal={Dalton Transactions}, author={Gebhard, M. and Hellwig, M. and Kroll, A. and Rogalla, D. and Winter, M. and Mallick, B. and Ludwig, A. and Wiesing, M. and Wieck, A. D. and Grundmeier, Guido and et al.}, year={2017}, pages={10220–10231} }' chicago: 'Gebhard, M., M. Hellwig, A. Kroll, D. Rogalla, M. Winter, B. Mallick, A. Ludwig, et al. “New Amidinate Complexes of Indium(Iii): Promising CVD Precursors for Transparent and Conductive In2O3 Thin Films.” Dalton Transactions, 2017, 10220–31. https://doi.org/10.1039/c7dt01280b.' ieee: 'M. Gebhard et al., “New amidinate complexes of indium(iii): promising CVD precursors for transparent and conductive In2O3 thin films,” Dalton Transactions, pp. 10220–10231, 2017.' mla: 'Gebhard, M., et al. “New Amidinate Complexes of Indium(Iii): Promising CVD Precursors for Transparent and Conductive In2O3 Thin Films.” Dalton Transactions, 2017, pp. 10220–31, doi:10.1039/c7dt01280b.' short: M. Gebhard, M. Hellwig, A. Kroll, D. Rogalla, M. Winter, B. Mallick, A. Ludwig, M. Wiesing, A.D. Wieck, G. Grundmeier, A. Devi, Dalton Transactions (2017) 10220–10231. date_created: 2021-07-27T14:18:28Z date_updated: 2022-01-06T06:55:42Z doi: 10.1039/c7dt01280b language: - iso: eng page: 10220-10231 publication: Dalton Transactions publication_identifier: issn: - 1477-9226 - 1477-9234 publication_status: published status: public title: 'New amidinate complexes of indium(iii): promising CVD precursors for transparent and conductive In2O3 thin films' type: journal_article user_id: '194' year: '2017' ... --- _id: '21925' author: - first_name: Dominik full_name: Rumlich, Dominik id: '76026' last_name: Rumlich orcid: 0000-0001-8682-450X - first_name: Sabine full_name: Ahlers, Sabine last_name: Ahlers citation: ama: 'Rumlich D, Ahlers S. The rich environment of CLIL classes as an ideal setting for collaborative learning. In: Ludwig C, van de Poel K, eds. Collaborative Learning and New Media. Frankfurt am Main, Germany: Lang; 2017:259-274.' apa: 'Rumlich, D., & Ahlers, S. (2017). The rich environment of CLIL classes as an ideal setting for collaborative learning. In C. Ludwig & K. van de Poel (Eds.), Collaborative learning and new media (pp. 259–274). Frankfurt am Main, Germany: Lang.' bibtex: '@inbook{Rumlich_Ahlers_2017, place={Frankfurt am Main, Germany}, title={The rich environment of CLIL classes as an ideal setting for collaborative learning}, booktitle={Collaborative learning and new media}, publisher={Lang}, author={Rumlich, Dominik and Ahlers, Sabine}, editor={Ludwig, Christian and van de Poel, KrisEditors}, year={2017}, pages={259–274} }' chicago: 'Rumlich, Dominik, and Sabine Ahlers. “The Rich Environment of CLIL Classes as an Ideal Setting for Collaborative Learning.” In Collaborative Learning and New Media, edited by Christian Ludwig and Kris van de Poel, 259–74. Frankfurt am Main, Germany: Lang, 2017.' ieee: 'D. Rumlich and S. Ahlers, “The rich environment of CLIL classes as an ideal setting for collaborative learning,” in Collaborative learning and new media, C. Ludwig and K. van de Poel, Eds. Frankfurt am Main, Germany: Lang, 2017, pp. 259–274.' mla: Rumlich, Dominik, and Sabine Ahlers. “The Rich Environment of CLIL Classes as an Ideal Setting for Collaborative Learning.” Collaborative Learning and New Media, edited by Christian Ludwig and Kris van de Poel, Lang, 2017, pp. 259–74. short: 'D. Rumlich, S. Ahlers, in: C. Ludwig, K. van de Poel (Eds.), Collaborative Learning and New Media, Lang, Frankfurt am Main, Germany, 2017, pp. 259–274.' date_created: 2021-04-30T08:07:00Z date_updated: 2022-01-06T06:55:19Z department: - _id: '36' - _id: '1' - _id: '612' editor: - first_name: Christian full_name: Ludwig, Christian last_name: Ludwig - first_name: Kris full_name: van de Poel, Kris last_name: van de Poel extern: '1' language: - iso: eng page: 259-274 place: Frankfurt am Main, Germany publication: Collaborative learning and new media publication_identifier: isbn: - 978-3-631-66797-2 publisher: Lang status: public title: The rich environment of CLIL classes as an ideal setting for collaborative learning type: book_chapter user_id: '76026' year: '2017' ... --- _id: '22045' abstract: - lang: eng text: A widely used Additive Manufacturing (AM) technology is Fused Deposition Modeling (FDM) to create prototypes and end-use parts with close-to-production thermoplastics. For their use as a final product, it is necessary that additively manufactured parts strictly adhere to the geometrical requirements of the technical drawing. In this paper, the holes and cylinders of the cylindrical elements are investigated in terms of achievable geometrical accuracy. For this purpose, different test specimens that allow a measurement of inner and outer diameters from 3 to 80 mm were designed. All specimens were measured with a coordinate measuring machine (CMM) to evaluate deviations from the nominal dimension and form deviations. The measuring method includes a scanning of the surface to record the course of dimensional deviations over the diameter. Thus, it was possible to visualize how deviations on cylindrical elements manufactured in FDM occur. In order to counteract these deviations and to improve the dimensional accuracy, different shrink factors and filling patterns were investigated. Consequently, an improvement of the dimensional accuracy was achieved. author: - first_name: F. full_name: Knoop, F. last_name: Knoop - first_name: Volker full_name: Schöppner, Volker id: '20530' last_name: Schöppner citation: ama: 'Knoop F, Schöppner V. Geometrical Accuracy of Holes and Cylinders Manufactured with Fused Deposition Modeling. In: 28th Annual International Solid Freeform Fabrication Symposium. Vol 28. ; 2017:2757-2776. doi:http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/GeometricalAccuracyofHolesandCylindersManufa.pdf' apa: Knoop, F., & Schöppner, V. (2017). Geometrical Accuracy of Holes and Cylinders Manufactured with Fused Deposition Modeling. 28th Annual International Solid Freeform Fabrication Symposium, 28, 2757–2776. http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/GeometricalAccuracyofHolesandCylindersManufa.pdf bibtex: '@inproceedings{Knoop_Schöppner_2017, title={Geometrical Accuracy of Holes and Cylinders Manufactured with Fused Deposition Modeling}, volume={28}, DOI={http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/GeometricalAccuracyofHolesandCylindersManufa.pdf}, booktitle={28th Annual International Solid Freeform Fabrication Symposium}, author={Knoop, F. and Schöppner, Volker}, year={2017}, pages={2757–2776} }' chicago: Knoop, F., and Volker Schöppner. “Geometrical Accuracy of Holes and Cylinders Manufactured with Fused Deposition Modeling.” In 28th Annual International Solid Freeform Fabrication Symposium, 28:2757–76, 2017. http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/GeometricalAccuracyofHolesandCylindersManufa.pdf. ieee: 'F. Knoop and V. Schöppner, “Geometrical Accuracy of Holes and Cylinders Manufactured with Fused Deposition Modeling,” in 28th Annual International Solid Freeform Fabrication Symposium, 2017, vol. 28, pp. 2757–2776, doi: http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/GeometricalAccuracyofHolesandCylindersManufa.pdf.' mla: Knoop, F., and Volker Schöppner. “Geometrical Accuracy of Holes and Cylinders Manufactured with Fused Deposition Modeling.” 28th Annual International Solid Freeform Fabrication Symposium, vol. 28, 2017, pp. 2757–76, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/GeometricalAccuracyofHolesandCylindersManufa.pdf. short: 'F. Knoop, V. Schöppner, in: 28th Annual International Solid Freeform Fabrication Symposium, 2017, pp. 2757–2776.' date_created: 2021-05-07T13:23:28Z date_updated: 2022-01-06T06:55:23Z department: - _id: '219' - _id: '624' - _id: '367' - _id: '321' - _id: '9' doi: http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/GeometricalAccuracyofHolesandCylindersManufa.pdf intvolume: ' 28' language: - iso: eng page: 2757-2776 publication: 28th Annual International Solid Freeform Fabrication Symposium status: public title: Geometrical Accuracy of Holes and Cylinders Manufactured with Fused Deposition Modeling type: conference user_id: '70729' volume: 28 year: '2017' ... --- _id: '90' abstract: - lang: eng text: We propose and extend an approach for the verification of safety properties for parameterized timed systems modeled as networks of timed automata. For this task, we introduce an incremental workflow that is based on our algorithm IC3 with Zones. It proceeds in a cycle in which single models of the system are verified, and the verification results are employed for the reasoning about the entire system. Starting with the smallest instances, the verification of the safety property is carried out fast and efficient. On successful verification, the algorithm produces an inductive strengthening of the safety property. We reuse this result and try to reason about the entire parameterized timed system. To this end, we extrapolate the inductive strengthening into a candidate for the next-larger model. In case this candidate is a valid inductive strengthening for the next larger model, our main theorem reasons about all models of the parameterized timed system, stating that the safety property holds true for all models. Otherwise, the main cycle starts over with the verification of the next larger model. This workflow is iterated indefinitely, until able to reason about the entire parameterized timed system, until a counterexample trace is found, or until the single models become too large to be handled in the verification. We reuse the intermediate results in a Feedback-loop in order to accelerate the verification runs for the single models. Furthermore, we consider an extended formalism in comparison to our previous publications. author: - first_name: Tobias full_name: Isenberg, Tobias last_name: Isenberg citation: ama: Isenberg T. Incremental Inductive Verification of Parameterized Timed Systems. ACM Transactions on Embedded Computing Systems. 2017;(2):47:1-47:24. doi:10.1145/2984640 apa: Isenberg, T. (2017). Incremental Inductive Verification of Parameterized Timed Systems. ACM Transactions on Embedded Computing Systems, (2), 47:1-47:24. https://doi.org/10.1145/2984640 bibtex: '@article{Isenberg_2017, title={Incremental Inductive Verification of Parameterized Timed Systems}, DOI={10.1145/2984640}, number={2}, journal={ACM Transactions on Embedded Computing Systems}, publisher={ACM}, author={Isenberg, Tobias}, year={2017}, pages={47:1-47:24} }' chicago: 'Isenberg, Tobias. “Incremental Inductive Verification of Parameterized Timed Systems.” ACM Transactions on Embedded Computing Systems, no. 2 (2017): 47:1-47:24. https://doi.org/10.1145/2984640.' ieee: T. Isenberg, “Incremental Inductive Verification of Parameterized Timed Systems,” ACM Transactions on Embedded Computing Systems, no. 2, pp. 47:1-47:24, 2017. mla: Isenberg, Tobias. “Incremental Inductive Verification of Parameterized Timed Systems.” ACM Transactions on Embedded Computing Systems, no. 2, ACM, 2017, pp. 47:1-47:24, doi:10.1145/2984640. short: T. Isenberg, ACM Transactions on Embedded Computing Systems (2017) 47:1-47:24. date_created: 2017-10-17T12:41:09Z date_updated: 2022-01-06T07:04:06Z ddc: - '040' department: - _id: '77' doi: 10.1145/2984640 file: - access_level: closed content_type: application/pdf creator: florida date_created: 2018-03-21T13:13:04Z date_updated: 2018-03-21T13:13:04Z file_id: '1572' file_name: 90-a47-isenberg.pdf file_size: 584870 relation: main_file success: 1 file_date_updated: 2018-03-21T13:13:04Z has_accepted_license: '1' issue: '2' language: - iso: eng page: 47:1-47:24 project: - _id: '1' name: SFB 901 - _id: '12' name: SFB 901 - Subprojekt B4 - _id: '3' name: SFB 901 - Project Area B publication: ACM Transactions on Embedded Computing Systems publisher: ACM status: public title: Incremental Inductive Verification of Parameterized Timed Systems type: journal_article user_id: '477' year: '2017' ... --- _id: '93' abstract: - lang: eng text: "In recent years, there has been a proliferation of technological developments that incorporate processing of human language. Hardware and software can be specialized for designated subject areas, and computational devices are designed for a widening variety of applications. At the same time, new areas and applications are emerging by demanding intelligent technology enhanced by the processing of human language. These new applications often perform tasks which handle information, and they have a capacity to reason, using both formal and human language. Many sub-areas of Artificial Intelligence demand integration of Natural Language Processing, at least to some degree. Furthermore, technologies require coverage of known as well as unknown agents, and tasks with potential variations. All of this takes place in environments with unknown factors.\r\nThe book covers theoretical work, advanced applications, approaches, and techniques for computational models of information, reasoning systems, and presentation in language. The book promotes work on intelligent natural language processing and related models of information, thought, reasoning, and other cognitive processes. The topics covered by the chapters prompt further research and developments of advanced systems in the areas of logic, computability, computational linguistics, cognitive science, neuroscience of language, robotics, and artificial intelligence, among others." author: - first_name: Michaela full_name: Geierhos, Michaela id: '42496' last_name: Geierhos orcid: 0000-0002-8180-5606 - first_name: Frederik Simon full_name: Bäumer, Frederik Simon id: '38837' last_name: Bäumer citation: ama: 'Geierhos M, Bäumer FS. Guesswork? Resolving Vagueness in User-Generated Software Requirements. In: Christiansen H, Jiménez-López MD, Loukanova R, Moss LS, eds. Partiality and Underspecification in Information, Languages, and Knowledge. 1st ed. Newcastle upon Tyne, UK: Cambridge Scholars Publishing; 2017:65-108.' apa: 'Geierhos, M., & Bäumer, F. S. (2017). Guesswork? Resolving Vagueness in User-Generated Software Requirements. In H. Christiansen, M. D. Jiménez-López, R. Loukanova, & L. S. Moss (Eds.), Partiality and Underspecification in Information, Languages, and Knowledge (1st ed., pp. 65–108). Newcastle upon Tyne, UK: Cambridge Scholars Publishing.' bibtex: '@inbook{Geierhos_Bäumer_2017, place={Newcastle upon Tyne, UK}, edition={1}, title={Guesswork? Resolving Vagueness in User-Generated Software Requirements}, booktitle={Partiality and Underspecification in Information, Languages, and Knowledge}, publisher={Cambridge Scholars Publishing}, author={Geierhos, Michaela and Bäumer, Frederik Simon}, editor={Christiansen, Henning and Jiménez-López, M. Dolores and Loukanova, Roussanka and Moss, Lawrence S.Editors}, year={2017}, pages={65–108} }' chicago: 'Geierhos, Michaela, and Frederik Simon Bäumer. “Guesswork? Resolving Vagueness in User-Generated Software Requirements.” In Partiality and Underspecification in Information, Languages, and Knowledge, edited by Henning Christiansen, M. Dolores Jiménez-López, Roussanka Loukanova, and Lawrence S. Moss, 1st ed., 65–108. Newcastle upon Tyne, UK: Cambridge Scholars Publishing, 2017.' ieee: 'M. Geierhos and F. S. Bäumer, “Guesswork? Resolving Vagueness in User-Generated Software Requirements,” in Partiality and Underspecification in Information, Languages, and Knowledge, 1st ed., H. Christiansen, M. D. Jiménez-López, R. Loukanova, and L. S. Moss, Eds. Newcastle upon Tyne, UK: Cambridge Scholars Publishing, 2017, pp. 65–108.' mla: Geierhos, Michaela, and Frederik Simon Bäumer. “Guesswork? Resolving Vagueness in User-Generated Software Requirements.” Partiality and Underspecification in Information, Languages, and Knowledge, edited by Henning Christiansen et al., 1st ed., Cambridge Scholars Publishing, 2017, pp. 65–108. short: 'M. Geierhos, F.S. Bäumer, in: H. Christiansen, M.D. Jiménez-López, R. Loukanova, L.S. Moss (Eds.), Partiality and Underspecification in Information, Languages, and Knowledge, 1st ed., Cambridge Scholars Publishing, Newcastle upon Tyne, UK, 2017, pp. 65–108.' date_created: 2017-10-17T12:41:09Z date_updated: 2022-01-06T07:04:13Z ddc: - '004' department: - _id: '36' - _id: '1' - _id: '579' edition: '1' editor: - first_name: 'Henning ' full_name: 'Christiansen, Henning ' last_name: Christiansen - first_name: M. Dolores full_name: Jiménez-López, M. Dolores last_name: Jiménez-López - first_name: 'Roussanka ' full_name: 'Loukanova, Roussanka ' last_name: Loukanova - first_name: Lawrence S. full_name: Moss, Lawrence S. last_name: Moss file: - access_level: closed content_type: application/pdf creator: fbaeumer date_created: 2019-01-11T11:43:23Z date_updated: 2019-01-11T11:43:23Z file_id: '6625' file_name: CSP_Chapter_GeierhosBaeumer.pdf file_size: 2888473 relation: main_file success: 1 file_date_updated: 2019-01-11T11:43:23Z has_accepted_license: '1' language: - iso: eng page: 65-108 place: Newcastle upon Tyne, UK project: - _id: '1' name: SFB 901 - _id: '3' name: SFB 901 - Project Area B - _id: '9' name: SFB 901 - Subproject B1 publication: Partiality and Underspecification in Information, Languages, and Knowledge publication_identifier: isbn: - 978-1- 4438-7947-7 publication_status: published publisher: Cambridge Scholars Publishing quality_controlled: '1' status: public title: Guesswork? Resolving Vagueness in User-Generated Software Requirements type: book_chapter user_id: '38837' year: '2017' ...