---
_id: '21682'
abstract:
- lang: eng
  text: At first sight the direct costs of Additive Manufacturing (AM) seem too high
    in comparison to traditional manufacturing. Considering the whole lifecycle costs
    of parts changes the point of view. Due to the modification of the new production
    process and new supply chains during a parts lifecycle, producing companies can
    strongly benefit from AM. Therefore, a costing model for assessing lifecycle costs
    with regard to specific applications and branches has been developed. The costing
    model represents the advantages of AM monetarily. For the evaluation of this model
    and the influence factors, different case studies have been performed including
    different approaches in part redesign. Deeper research is and will be carried
    out with respect to the AM building rates and the comparability of various AM
    machines, as these facts are hardly comparable for end users. This paper will
    present the methodology and some results of the case studies conducted over the
    whole product lifecycle.
author:
- first_name: C.
  full_name: Lindemann, C.
  last_name: Lindemann
- first_name: U.
  full_name: Jahnke, U.
  last_name: Jahnke
- first_name: M.
  full_name: Moi, M.
  last_name: Moi
- first_name: R.
  full_name: Koch, R.
  last_name: Koch
citation:
  ama: 'Lindemann C, Jahnke U, Moi M, Koch R. Impact and Influence Factors of Additive
    Manufacturing on Product Lifecycle Costs. In: <i>24th Annual International Solid
    Freeform Fabrication Symposium</i>. Vol 24. ; 2013:998-1008. doi:<a href="http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-79-Lindemann.pdf">http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-79-Lindemann.pdf</a>'
  apa: Lindemann, C., Jahnke, U., Moi, M., &#38; Koch, R. (2013). Impact and Influence
    Factors of Additive Manufacturing on Product Lifecycle Costs. In <i>24th Annual
    International Solid Freeform Fabrication Symposium</i> (Vol. 24, pp. 998–1008).
    <a href="http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-79-Lindemann.pdf">http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-79-Lindemann.pdf</a>
  bibtex: '@inproceedings{Lindemann_Jahnke_Moi_Koch_2013, title={Impact and Influence
    Factors of Additive Manufacturing on Product Lifecycle Costs}, volume={24}, DOI={<a
    href="http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-79-Lindemann.pdf">http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-79-Lindemann.pdf</a>},
    booktitle={24th Annual International Solid Freeform Fabrication Symposium}, author={Lindemann,
    C. and Jahnke, U. and Moi, M. and Koch, R.}, year={2013}, pages={998–1008} }'
  chicago: Lindemann, C., U. Jahnke, M. Moi, and R. Koch. “Impact and Influence Factors
    of Additive Manufacturing on Product Lifecycle Costs.” In <i>24th Annual International
    Solid Freeform Fabrication Symposium</i>, 24:998–1008, 2013. <a href="http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-79-Lindemann.pdf">http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-79-Lindemann.pdf</a>.
  ieee: C. Lindemann, U. Jahnke, M. Moi, and R. Koch, “Impact and Influence Factors
    of Additive Manufacturing on Product Lifecycle Costs,” in <i>24th Annual International
    Solid Freeform Fabrication Symposium</i>, 2013, vol. 24, pp. 998–1008.
  mla: Lindemann, C., et al. “Impact and Influence Factors of Additive Manufacturing
    on Product Lifecycle Costs.” <i>24th Annual International Solid Freeform Fabrication
    Symposium</i>, vol. 24, 2013, pp. 998–1008, doi:<a href="http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-79-Lindemann.pdf">http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-79-Lindemann.pdf</a>.
  short: 'C. Lindemann, U. Jahnke, M. Moi, R. Koch, in: 24th Annual International
    Solid Freeform Fabrication Symposium, 2013, pp. 998–1008.'
date_created: 2021-04-21T06:40:35Z
date_updated: 2022-01-06T06:55:10Z
department:
- _id: '144'
- _id: '219'
- _id: '624'
doi: http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-79-Lindemann.pdf
intvolume: '        24'
language:
- iso: eng
page: 998-1008
publication: 24th Annual International Solid Freeform Fabrication Symposium
publication_identifier:
  isbn:
  - 1053-2153
status: public
title: Impact and Influence Factors of Additive Manufacturing on Product Lifecycle
  Costs
type: conference
user_id: '55833'
volume: 24
year: '2013'
...
---
_id: '21680'
abstract:
- lang: eng
  text: The costs of additive manufactured parts often seem too high in comparison
    to those of traditionally manufactured parts, as the information about major cost
    drivers, especially for additive manufactured metal parts, is weak. Therefore,
    a lifecycle analysis of additive manufactured parts is needed to understand and
    rate the cost drivers that act as the largest contributors to unit costs, and
    to provide a focus for future cost reduction activities for the Additive Manufacturing
    (AM) technology. A better understanding of the cost structure will help to compare
    the AM costs with the opportunity costs of the classical manufacturing technologies
    and will make it easier to justify the use of AM manufactured parts. This paper
    will present work in progress and methodology based on a sample investigated with
    business process analysis / simulation and activity based costing. In addition,
    cost drivers associated with metal AM process will be rated.
author:
- first_name: C.
  full_name: Lindemann, C.
  last_name: Lindemann
- first_name: U.
  full_name: Jahnke, U.
  last_name: Jahnke
- first_name: M.
  full_name: Moi, M.
  last_name: Moi
- first_name: R.
  full_name: Koch, R.
  last_name: Koch
citation:
  ama: 'Lindemann C, Jahnke U, Moi M, Koch R. Analyzing Product Lifecycle Costs for
    a Better Understanding of Cost Drivers in Additve Manufacturing. In: <i>23rd Annual
    International Solid Freeform Fabrication Symposium</i>. Vol 23. ; 2012:177-188.
    doi:<a href="http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-12-Lindemann.pdf">http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-12-Lindemann.pdf</a>'
  apa: Lindemann, C., Jahnke, U., Moi, M., &#38; Koch, R. (2012). Analyzing Product
    Lifecycle Costs for a Better Understanding of Cost Drivers in Additve Manufacturing.
    In <i>23rd Annual International Solid Freeform Fabrication Symposium</i> (Vol.
    23, pp. 177–188). <a href="http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-12-Lindemann.pdf">http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-12-Lindemann.pdf</a>
  bibtex: '@inproceedings{Lindemann_Jahnke_Moi_Koch_2012, title={Analyzing Product
    Lifecycle Costs for a Better Understanding of Cost Drivers in Additve Manufacturing},
    volume={23}, DOI={<a href="http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-12-Lindemann.pdf">http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-12-Lindemann.pdf</a>},
    booktitle={23rd Annual International Solid Freeform Fabrication Symposium}, author={Lindemann,
    C. and Jahnke, U. and Moi, M. and Koch, R.}, year={2012}, pages={177–188} }'
  chicago: Lindemann, C., U. Jahnke, M. Moi, and R. Koch. “Analyzing Product Lifecycle
    Costs for a Better Understanding of Cost Drivers in Additve Manufacturing.” In
    <i>23rd Annual International Solid Freeform Fabrication Symposium</i>, 23:177–88,
    2012. <a href="http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-12-Lindemann.pdf">http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-12-Lindemann.pdf</a>.
  ieee: C. Lindemann, U. Jahnke, M. Moi, and R. Koch, “Analyzing Product Lifecycle
    Costs for a Better Understanding of Cost Drivers in Additve Manufacturing,” in
    <i>23rd Annual International Solid Freeform Fabrication Symposium</i>, 2012, vol.
    23, pp. 177–188.
  mla: Lindemann, C., et al. “Analyzing Product Lifecycle Costs for a Better Understanding
    of Cost Drivers in Additve Manufacturing.” <i>23rd Annual International Solid
    Freeform Fabrication Symposium</i>, vol. 23, 2012, pp. 177–88, doi:<a href="http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-12-Lindemann.pdf">http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-12-Lindemann.pdf</a>.
  short: 'C. Lindemann, U. Jahnke, M. Moi, R. Koch, in: 23rd Annual International
    Solid Freeform Fabrication Symposium, 2012, pp. 177–188.'
date_created: 2021-04-21T06:34:46Z
date_updated: 2022-01-06T06:55:10Z
department:
- _id: '144'
- _id: '219'
- _id: '624'
doi: http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-12-Lindemann.pdf
intvolume: '        23'
language:
- iso: eng
page: 177-188
publication: 23rd Annual International Solid Freeform Fabrication Symposium
publication_identifier:
  isbn:
  - 1053-2153
status: public
title: Analyzing Product Lifecycle Costs for a Better Understanding of Cost Drivers
  in Additve Manufacturing
type: conference
user_id: '55833'
volume: 23
year: '2012'
...