---
_id: '22050'
abstract:
- lang: eng
  text: Generative production techniques have the advantage of manufacturing parts
    via an additive process without needing a forming tool. One of these additive
    manufacturing technologies is “Fused Deposition Modeling” (FDM). From a 3D-CAD
    data set, components and assemblies are manufactured out of thermoplastic material
    in only a few working steps. Native software automatically slices the data, calculates
    the support structures, and creates toolpaths. The parts then are built up layer
    by layer by means of an additive process. An extrusion head deposits the molten
    thermoplastic filament to create each layer. This technology began as a process
    for creating prototype parts; recently it has found new utility in the production
    of manufacturing tools and as a manufacturing process for end-use parts. In order
    to be used as a part for serial production, the components must possess the required
    mechanical properties. To this end, not only is the chosen material relevant,
    but a correct process control is also necessary. An interesting material for the
    aircraft and automotive industry is the material PEI with the trade name Ultem*9085.
    This material should typically be used on FDM-machines for the manufacturing of
    end products. The aim of the research is to determine the present mechanical data
    based on the process control, as well as reproducibility from job to job. In this
    work the influence of the orientation and the structure of the manufactured parts
    based on the mechanical data are analyzed. Sample parts are generated with the
    given parameters of the native software based upon the CAD data. First, specimens
    were analyzed concerning their geometry and configuration. The dimensions and
    weight were measured. The mechanical tests conducted were the tensile and compression
    tests.
author:
- first_name: A.
  full_name: Bagsik, A.
  last_name: Bagsik
- first_name: Volker
  full_name: Schöppner, Volker
  id: '20530'
  last_name: Schöppner
- first_name: E.
  full_name: Klemp, E.
  last_name: Klemp
citation:
  ama: 'Bagsik A, Schöppner V, Klemp E. FDM Part Quality Manufactured with ULTEM 9085.
    In: <i>Proceedings of International Conference Polymeric Materials</i>. ; 2010.
    doi:<a href="https://docplayer.net/255735-Fdm-part-quality-manufactured-with-ultem-9085.html">https://docplayer.net/255735-Fdm-part-quality-manufactured-with-ultem-9085.html</a>'
  apa: Bagsik, A., Schöppner, V., &#38; Klemp, E. (2010). FDM Part Quality Manufactured
    with ULTEM 9085. <i>Proceedings of International Conference Polymeric Materials</i>.
    <a href="https://docplayer.net/255735-Fdm-part-quality-manufactured-with-ultem-9085.html">https://docplayer.net/255735-Fdm-part-quality-manufactured-with-ultem-9085.html</a>
  bibtex: '@inproceedings{Bagsik_Schöppner_Klemp_2010, title={FDM Part Quality Manufactured
    with ULTEM 9085}, DOI={<a href="https://docplayer.net/255735-Fdm-part-quality-manufactured-with-ultem-9085.html">https://docplayer.net/255735-Fdm-part-quality-manufactured-with-ultem-9085.html</a>},
    booktitle={Proceedings of International Conference Polymeric Materials}, author={Bagsik,
    A. and Schöppner, Volker and Klemp, E.}, year={2010} }'
  chicago: Bagsik, A., Volker Schöppner, and E. Klemp. “FDM Part Quality Manufactured
    with ULTEM 9085.” In <i>Proceedings of International Conference Polymeric Materials</i>,
    2010. <a href="https://docplayer.net/255735-Fdm-part-quality-manufactured-with-ultem-9085.html">https://docplayer.net/255735-Fdm-part-quality-manufactured-with-ultem-9085.html</a>.
  ieee: 'A. Bagsik, V. Schöppner, and E. Klemp, “FDM Part Quality Manufactured with
    ULTEM 9085,” 2010, doi: <a href="https://docplayer.net/255735-Fdm-part-quality-manufactured-with-ultem-9085.html">https://docplayer.net/255735-Fdm-part-quality-manufactured-with-ultem-9085.html</a>.'
  mla: Bagsik, A., et al. “FDM Part Quality Manufactured with ULTEM 9085.” <i>Proceedings
    of International Conference Polymeric Materials</i>, 2010, doi:<a href="https://docplayer.net/255735-Fdm-part-quality-manufactured-with-ultem-9085.html">https://docplayer.net/255735-Fdm-part-quality-manufactured-with-ultem-9085.html</a>.
  short: 'A. Bagsik, V. Schöppner, E. Klemp, in: Proceedings of International Conference
    Polymeric Materials, 2010.'
date_created: 2021-05-07T13:23:34Z
date_updated: 2022-04-25T08:04:26Z
department:
- _id: '219'
- _id: '624'
- _id: '367'
- _id: '9'
doi: https://docplayer.net/255735-Fdm-part-quality-manufactured-with-ultem-9085.html
language:
- iso: eng
publication: Proceedings of International Conference Polymeric Materials
publication_identifier:
  isbn:
  - 978-3-868-29282-4
quality_controlled: '1'
status: public
title: FDM Part Quality Manufactured with ULTEM 9085
type: conference
user_id: '70729'
year: '2010'
...