[{"_id":"61834","user_id":"106786","language":[{"iso":"eng"}],"type":"journal_article","publication":"The International Journal of Advanced Manufacturing Technology","abstract":[{"lang":"eng","text":"<jats:title>Abstract</jats:title><jats:p>3D printing or additive manufacturing (AM) possesses enormous potential to benefit the manufacturing industry. Presently, rotary draw bending (RDB) is one of the most commonly used cold-forming industrial process for bending metal tubes. Pressure die is a fundamental forming tool in RDB processes, and it is conventionally made by various grades of comparatively expensive alloy steels. This research presents a novel design of a pressure die which can be 3D printed by using inexpensive polymeric filaments. In this research paper, the 3D-printed pressure die is named as “FFF-pressure die.” The material used to fabricate the FFF-pressure die is a thermoplastic polymer known as “ecoPLA.” The mechanical properties of ecoPLA are studied in relation to the process conditions of a RDB process. Firstly, an initial feasibility of using the FFF-pressure die in a RDB process is obtained by conducting a quick static stress analysis with actual process conditions. After initial feasibility, a complete RDB process is developed and simulated with actual process conditions and material properties. The FFF-pressure die is then practically fabricated by FFF 3D printer and experimentally tested on an industrial RDB machine. The results of practical experiments are compared with the simulation results. In order to make a comparison of the FFF-pressure die with the conventional metal pressure die, the simulation and practical process is also conducted with the conventional metal pressure die. A performance and cost comparison is made between the polymeric FFF-pressure die and the conventional metal pressure die.  Von Mises stresses, contact forces, failure risk, and elastic deformations are analyzed. The advantages and limitations of using the FFF-pressure die in a RDB process are discussed in the end. This research intends to widen the avenue of using cost-effective and lightweight forming tools in metal forming industries.</jats:p>"}],"status":"public","date_updated":"2025-10-15T13:08:16Z","publisher":"Springer Science and Business Media LLC","date_created":"2025-10-15T09:02:15Z","author":[{"last_name":"Kaleem","full_name":"Kaleem, Muhammad Ali","first_name":"Muhammad Ali"},{"full_name":"Steinheimer, Rainer","last_name":"Steinheimer","first_name":"Rainer"},{"full_name":"Frohn-Sörensen, Peter","last_name":"Frohn-Sörensen","first_name":"Peter"},{"first_name":"Steffen","full_name":"Gabsa, Steffen","id":"106786","last_name":"Gabsa"},{"first_name":"Bernd","full_name":"Engel, Bernd","last_name":"Engel"}],"volume":134,"title":"Additive manufacturing of polymeric pressure die for rotary draw bending process","doi":"10.1007/s00170-024-14221-3","publication_status":"published","publication_identifier":{"issn":["0268-3768","1433-3015"]},"issue":"3-4","year":"2024","citation":{"bibtex":"@article{Kaleem_Steinheimer_Frohn-Sörensen_Gabsa_Engel_2024, title={Additive manufacturing of polymeric pressure die for rotary draw bending process}, volume={134}, DOI={<a href=\"https://doi.org/10.1007/s00170-024-14221-3\">10.1007/s00170-024-14221-3</a>}, number={3–4}, journal={The International Journal of Advanced Manufacturing Technology}, publisher={Springer Science and Business Media LLC}, author={Kaleem, Muhammad Ali and Steinheimer, Rainer and Frohn-Sörensen, Peter and Gabsa, Steffen and Engel, Bernd}, year={2024}, pages={1789–1804} }","mla":"Kaleem, Muhammad Ali, et al. “Additive Manufacturing of Polymeric Pressure Die for Rotary Draw Bending Process.” <i>The International Journal of Advanced Manufacturing Technology</i>, vol. 134, no. 3–4, Springer Science and Business Media LLC, 2024, pp. 1789–804, doi:<a href=\"https://doi.org/10.1007/s00170-024-14221-3\">10.1007/s00170-024-14221-3</a>.","short":"M.A. Kaleem, R. Steinheimer, P. Frohn-Sörensen, S. Gabsa, B. Engel, The International Journal of Advanced Manufacturing Technology 134 (2024) 1789–1804.","apa":"Kaleem, M. A., Steinheimer, R., Frohn-Sörensen, P., Gabsa, S., &#38; Engel, B. (2024). Additive manufacturing of polymeric pressure die for rotary draw bending process. <i>The International Journal of Advanced Manufacturing Technology</i>, <i>134</i>(3–4), 1789–1804. <a href=\"https://doi.org/10.1007/s00170-024-14221-3\">https://doi.org/10.1007/s00170-024-14221-3</a>","ama":"Kaleem MA, Steinheimer R, Frohn-Sörensen P, Gabsa S, Engel B. Additive manufacturing of polymeric pressure die for rotary draw bending process. <i>The International Journal of Advanced Manufacturing Technology</i>. 2024;134(3-4):1789-1804. doi:<a href=\"https://doi.org/10.1007/s00170-024-14221-3\">10.1007/s00170-024-14221-3</a>","chicago":"Kaleem, Muhammad Ali, Rainer Steinheimer, Peter Frohn-Sörensen, Steffen Gabsa, and Bernd Engel. “Additive Manufacturing of Polymeric Pressure Die for Rotary Draw Bending Process.” <i>The International Journal of Advanced Manufacturing Technology</i> 134, no. 3–4 (2024): 1789–1804. <a href=\"https://doi.org/10.1007/s00170-024-14221-3\">https://doi.org/10.1007/s00170-024-14221-3</a>.","ieee":"M. A. Kaleem, R. Steinheimer, P. Frohn-Sörensen, S. Gabsa, and B. Engel, “Additive manufacturing of polymeric pressure die for rotary draw bending process,” <i>The International Journal of Advanced Manufacturing Technology</i>, vol. 134, no. 3–4, pp. 1789–1804, 2024, doi: <a href=\"https://doi.org/10.1007/s00170-024-14221-3\">10.1007/s00170-024-14221-3</a>."},"intvolume":"       134","page":"1789-1804"},{"year":"2022","title":"Robust estimation of clinch joint characteristics based on data-driven methods","date_created":"2022-12-14T12:24:29Z","publisher":"Springer Science and Business Media LLC","abstract":[{"text":"Given a steadily increasing demand on multi-material lightweight designs, fast and cost-efficient production technologies, such as the mechanical joining process clinching, are becoming more and more relevant for series production. Since the application of such joining techniques often base on the ability to reach similar or even better joint loading capacities compared to established joining processes (e.g., spot welding), few contributions investigated the systematic improvement of clinch joint characteristics. In this regard, the use of data-driven methods in combination with optimization algorithms showed already high potentials for the analysis of individual joints and the definition of optimal tool configurations. However, the often missing consideration of uncertainties, such as varying material properties, and the related calculation of their impact on clinch joint properties can lead to poor estimation results and thus to a decreased reliability of the entire joint connection. This can cause major challenges, especially for the design and dimensioning of safety-relevant components, such as in car bodies. Motivated by this, the presented contribution introduces a novel method for the robust estimation of clinch joint characteristics including uncertainties of varying and versatile process chains in mechanical joining. Therefore, the utilization of Gaussian process regression models is demonstrated and evaluated regarding the ability to achieve sufficient prediction qualities.","lang":"eng"}],"publication":"The International Journal of Advanced Manufacturing Technology","language":[{"iso":"eng"}],"keyword":["Industrial and Manufacturing Engineering","Computer Science Applications","Mechanical Engineering","Software","Control and Systems Engineering"],"citation":{"ama":"Zirngibl C, Schleich B, Wartzack S. Robust estimation of clinch joint characteristics based on data-driven methods. <i>The International Journal of Advanced Manufacturing Technology</i>. Published online 2022. doi:<a href=\"https://doi.org/10.1007/s00170-022-10441-7\">10.1007/s00170-022-10441-7</a>","ieee":"C. Zirngibl, B. Schleich, and S. Wartzack, “Robust estimation of clinch joint characteristics based on data-driven methods,” <i>The International Journal of Advanced Manufacturing Technology</i>, 2022, doi: <a href=\"https://doi.org/10.1007/s00170-022-10441-7\">10.1007/s00170-022-10441-7</a>.","chicago":"Zirngibl, Christoph, Benjamin Schleich, and Sandro Wartzack. “Robust Estimation of Clinch Joint Characteristics Based on Data-Driven Methods.” <i>The International Journal of Advanced Manufacturing Technology</i>, 2022. <a href=\"https://doi.org/10.1007/s00170-022-10441-7\">https://doi.org/10.1007/s00170-022-10441-7</a>.","bibtex":"@article{Zirngibl_Schleich_Wartzack_2022, title={Robust estimation of clinch joint characteristics based on data-driven methods}, DOI={<a href=\"https://doi.org/10.1007/s00170-022-10441-7\">10.1007/s00170-022-10441-7</a>}, journal={The International Journal of Advanced Manufacturing Technology}, publisher={Springer Science and Business Media LLC}, author={Zirngibl, Christoph and Schleich, Benjamin and Wartzack, Sandro}, year={2022} }","mla":"Zirngibl, Christoph, et al. “Robust Estimation of Clinch Joint Characteristics Based on Data-Driven Methods.” <i>The International Journal of Advanced Manufacturing Technology</i>, Springer Science and Business Media LLC, 2022, doi:<a href=\"https://doi.org/10.1007/s00170-022-10441-7\">10.1007/s00170-022-10441-7</a>.","short":"C. Zirngibl, B. Schleich, S. Wartzack, The International Journal of Advanced Manufacturing Technology (2022).","apa":"Zirngibl, C., Schleich, B., &#38; Wartzack, S. (2022). Robust estimation of clinch joint characteristics based on data-driven methods. <i>The International Journal of Advanced Manufacturing Technology</i>. <a href=\"https://doi.org/10.1007/s00170-022-10441-7\">https://doi.org/10.1007/s00170-022-10441-7</a>"},"publication_identifier":{"issn":["0268-3768","1433-3015"]},"publication_status":"published","doi":"10.1007/s00170-022-10441-7","main_file_link":[{"url":"https://link.springer.com/article/10.1007/s00170-022-10441-7","open_access":"1"}],"author":[{"first_name":"Christoph","last_name":"Zirngibl","full_name":"Zirngibl, Christoph"},{"first_name":"Benjamin","full_name":"Schleich, Benjamin","last_name":"Schleich"},{"first_name":"Sandro","last_name":"Wartzack","full_name":"Wartzack, Sandro"}],"date_updated":"2023-01-02T11:14:26Z","oa":"1","status":"public","type":"journal_article","department":[{"_id":"630"}],"user_id":"14931","_id":"34414","project":[{"name":"TRR 285: TRR 285","_id":"130","grant_number":"418701707"},{"_id":"132","name":"TRR 285 - B: TRR 285 - Project Area B"},{"name":"TRR 285 – B05: TRR 285 - Subproject B05","_id":"144"}]},{"citation":{"ieee":"M. Böhnke, M. S. Rossel, C. R. Bielak, M. Bobbert, and G. Meschut, “Concept development of a method for identifying friction coefficients for the numerical simulation of clinching processes,” <i>The International Journal of Advanced Manufacturing Technology</i>, 2021, doi: <a href=\"https://doi.org/10.1007/s00170-021-07986-4\">10.1007/s00170-021-07986-4</a>.","chicago":"Böhnke, Max, Moritz Sebastian Rossel, Christian Roman Bielak, Mathias Bobbert, and Gerson Meschut. “Concept Development of a Method for Identifying Friction Coefficients for the Numerical Simulation of Clinching Processes.” <i>The International Journal of Advanced Manufacturing Technology</i>, 2021. <a href=\"https://doi.org/10.1007/s00170-021-07986-4\">https://doi.org/10.1007/s00170-021-07986-4</a>.","ama":"Böhnke M, Rossel MS, Bielak CR, Bobbert M, Meschut G. Concept development of a method for identifying friction coefficients for the numerical simulation of clinching processes. <i>The International Journal of Advanced Manufacturing Technology</i>. Published online 2021. doi:<a href=\"https://doi.org/10.1007/s00170-021-07986-4\">10.1007/s00170-021-07986-4</a>","mla":"Böhnke, Max, et al. “Concept Development of a Method for Identifying Friction Coefficients for the Numerical Simulation of Clinching Processes.” <i>The International Journal of Advanced Manufacturing Technology</i>, 2021, doi:<a href=\"https://doi.org/10.1007/s00170-021-07986-4\">10.1007/s00170-021-07986-4</a>.","short":"M. Böhnke, M.S. Rossel, C.R. Bielak, M. Bobbert, G. Meschut, The International Journal of Advanced Manufacturing Technology (2021).","bibtex":"@article{Böhnke_Rossel_Bielak_Bobbert_Meschut_2021, title={Concept development of a method for identifying friction coefficients for the numerical simulation of clinching processes}, DOI={<a href=\"https://doi.org/10.1007/s00170-021-07986-4\">10.1007/s00170-021-07986-4</a>}, journal={The International Journal of Advanced Manufacturing Technology}, author={Böhnke, Max and Rossel, Moritz Sebastian and Bielak, Christian Roman and Bobbert, Mathias and Meschut, Gerson}, year={2021} }","apa":"Böhnke, M., Rossel, M. S., Bielak, C. R., Bobbert, M., &#38; Meschut, G. (2021). Concept development of a method for identifying friction coefficients for the numerical simulation of clinching processes. <i>The International Journal of Advanced Manufacturing Technology</i>. <a href=\"https://doi.org/10.1007/s00170-021-07986-4\">https://doi.org/10.1007/s00170-021-07986-4</a>"},"year":"2021","publication_status":"published","publication_identifier":{"issn":["0268-3768","1433-3015"]},"quality_controlled":"1","main_file_link":[{"url":"https://link.springer.com/article/10.1007/s00170-021-07986-4","open_access":"1"}],"doi":"10.1007/s00170-021-07986-4","title":"Concept development of a method for identifying friction coefficients for the numerical simulation of clinching processes","author":[{"last_name":"Böhnke","full_name":"Böhnke, Max","id":"45779","first_name":"Max"},{"last_name":"Rossel","full_name":"Rossel, Moritz Sebastian","id":"44503","first_name":"Moritz Sebastian"},{"last_name":"Bielak","id":"34782","full_name":"Bielak, Christian Roman","first_name":"Christian Roman"},{"first_name":"Mathias","id":"7850","full_name":"Bobbert, Mathias","last_name":"Bobbert"},{"full_name":"Meschut, Gerson","id":"32056","last_name":"Meschut","orcid":"0000-0002-2763-1246","first_name":"Gerson"}],"date_created":"2021-10-06T10:39:08Z","date_updated":"2023-01-17T09:01:52Z","oa":"1","status":"public","abstract":[{"text":"<jats:title>Abstract</jats:title><jats:p>In order to reduce fuel consumption and thus pollutant emissions, the automotive industry is increasingly developing lightweight construction concepts that are accompanied by an increasing usage of aluminum materials. Due to poor weldability of aluminum in combination with other materials, mechanical joining methods such as clinching were developed and established in series production. In order to predict the relevant characteristics of clinched joints and to ensure the reliability of the process, it is simulated numerically during product development processes. In this regard, the predictive accuracy of the simulated process highly depends on the implemented friction model. In particular, the frictional behavior between the sheet metals as well as between the sheet metal and clinching tools has a significant impact on the geometrical formation of the clinched joint. No testing methods exist that can sufficiently investigate the frictional behavior in sheet materials, especially under high interface pressures, different relative velocities, and long friction paths, while allowing a decoupled consideration of the test parameters. This paper describes the development of further testing concepts based on a proven tribo-torsion test method for determining friction coefficients between sheet metal materials for the simulation of clinching processes. For this purpose, the correlation of interface pressure and the relative velocity between aluminum and steel sheet material in clinching processes is investigated using numerical simulation. Based on these findings, the developed concepts focus on determining friction coefficients at interface pressures of the above materials, yield stress, as well as the reproduction of the occurring friction conditions between sheet metal materials and tool surfaces in clinching processes using tool substitutes. Furthermore, wear investigations between sheet metal material and tool surface were carried out in the friction tests with subsequent EDX analyses of the frictioned tool surfaces. The developed method also allows an optical deformation measurement of the sheet metal material specimen by means of digital image correlation (DIC). Based on a methodological approach, the test setups and the test systems used are explained, and the functionality of the concepts is proven by experimental tests using different sheet metal materials.</jats:p>","lang":"eng"}],"type":"journal_article","publication":"The International Journal of Advanced Manufacturing Technology","language":[{"iso":"eng"}],"user_id":"45779","department":[{"_id":"157"},{"_id":"630"}],"project":[{"grant_number":"418701707","name":"TRR 285: TRR 285","_id":"130"},{"name":"TRR 285 - A: TRR 285 - Project Area A","_id":"131"},{"_id":"135","name":"TRR 285 – A01: TRR 285 - Subproject A01"}],"_id":"25556"},{"title":"Concept development of a method for identifying friction coefficients for the numerical simulation of clinching processes","doi":"10.1007/s00170-021-07986-4","date_updated":"2023-01-17T09:01:35Z","author":[{"full_name":"Böhnke, Max","last_name":"Böhnke","first_name":"Max"},{"last_name":"Rossel","full_name":"Rossel, Moritz","first_name":"Moritz"},{"full_name":"Bielak, Christian R.","last_name":"Bielak","first_name":"Christian R."},{"first_name":"Mathias","full_name":"Bobbert, Mathias","last_name":"Bobbert"},{"last_name":"Meschut","full_name":"Meschut, Gerson","first_name":"Gerson"}],"date_created":"2021-09-21T07:37:02Z","year":"2021","citation":{"apa":"Böhnke, M., Rossel, M., Bielak, C. R., Bobbert, M., &#38; Meschut, G. (2021). Concept development of a method for identifying friction coefficients for the numerical simulation of clinching processes. <i>The International Journal of Advanced Manufacturing Technology</i>. <a href=\"https://doi.org/10.1007/s00170-021-07986-4\">https://doi.org/10.1007/s00170-021-07986-4</a>","mla":"Böhnke, Max, et al. “Concept Development of a Method for Identifying Friction Coefficients for the Numerical Simulation of Clinching Processes.” <i>The International Journal of Advanced Manufacturing Technology</i>, 2021, doi:<a href=\"https://doi.org/10.1007/s00170-021-07986-4\">10.1007/s00170-021-07986-4</a>.","bibtex":"@article{Böhnke_Rossel_Bielak_Bobbert_Meschut_2021, title={Concept development of a method for identifying friction coefficients for the numerical simulation of clinching processes}, DOI={<a href=\"https://doi.org/10.1007/s00170-021-07986-4\">10.1007/s00170-021-07986-4</a>}, journal={The International Journal of Advanced Manufacturing Technology}, author={Böhnke, Max and Rossel, Moritz and Bielak, Christian R. and Bobbert, Mathias and Meschut, Gerson}, year={2021} }","short":"M. Böhnke, M. Rossel, C.R. Bielak, M. Bobbert, G. Meschut, The International Journal of Advanced Manufacturing Technology (2021).","ieee":"M. Böhnke, M. Rossel, C. R. Bielak, M. Bobbert, and G. Meschut, “Concept development of a method for identifying friction coefficients for the numerical simulation of clinching processes,” <i>The International Journal of Advanced Manufacturing Technology</i>, 2021, doi: <a href=\"https://doi.org/10.1007/s00170-021-07986-4\">10.1007/s00170-021-07986-4</a>.","chicago":"Böhnke, Max, Moritz Rossel, Christian R. Bielak, Mathias Bobbert, and Gerson Meschut. “Concept Development of a Method for Identifying Friction Coefficients for the Numerical Simulation of Clinching Processes.” <i>The International Journal of Advanced Manufacturing Technology</i>, 2021. <a href=\"https://doi.org/10.1007/s00170-021-07986-4\">https://doi.org/10.1007/s00170-021-07986-4</a>.","ama":"Böhnke M, Rossel M, Bielak CR, Bobbert M, Meschut G. Concept development of a method for identifying friction coefficients for the numerical simulation of clinching processes. <i>The International Journal of Advanced Manufacturing Technology</i>. Published online 2021. doi:<a href=\"https://doi.org/10.1007/s00170-021-07986-4\">10.1007/s00170-021-07986-4</a>"},"quality_controlled":"1","publication_identifier":{"issn":["0268-3768","1433-3015"]},"publication_status":"published","article_type":"original","language":[{"iso":"eng"}],"_id":"24739","user_id":"45779","abstract":[{"lang":"eng","text":"<jats:title>Abstract</jats:title><jats:p>In order to reduce fuel consumption and thus pollutant emissions, the automotive industry is increasingly developing lightweight construction concepts that are accompanied by an increasing usage of aluminum materials. Due to poor weldability of aluminum in combination with other materials, mechanical joining methods such as clinching were developed and established in series production. In order to predict the relevant characteristics of clinched joints and to ensure the reliability of the process, it is simulated numerically during product development processes. In this regard, the predictive accuracy of the simulated process highly depends on the implemented friction model. In particular, the frictional behavior between the sheet metals as well as between the sheet metal and clinching tools has a significant impact on the geometrical formation of the clinched joint. No testing methods exist that can sufficiently investigate the frictional behavior in sheet materials, especially under high interface pressures, different relative velocities, and long friction paths, while allowing a decoupled consideration of the test parameters. This paper describes the development of further testing concepts based on a proven tribo-torsion test method for determining friction coefficients between sheet metal materials for the simulation of clinching processes. For this purpose, the correlation of interface pressure and the relative velocity between aluminum and steel sheet material in clinching processes is investigated using numerical simulation. Based on these findings, the developed concepts focus on determining friction coefficients at interface pressures of the above materials, yield stress, as well as the reproduction of the occurring friction conditions between sheet metal materials and tool surfaces in clinching processes using tool substitutes. Furthermore, wear investigations between sheet metal material and tool surface were carried out in the friction tests with subsequent EDX analyses of the frictioned tool surfaces. The developed method also allows an optical deformation measurement of the sheet metal material specimen by means of digital image correlation (DIC). Based on a methodological approach, the test setups and the test systems used are explained, and the functionality of the concepts is proven by experimental tests using different sheet metal materials.</jats:p>"}],"status":"public","publication":"The International Journal of Advanced Manufacturing Technology","type":"journal_article"},{"citation":{"bibtex":"@article{Tavana_Zareinejad_Santos-Arteaga_Kaviani_2016, title={A conceptual analytic network model for evaluating and selecting third-party reverse logistics providers}, volume={86}, DOI={<a href=\"https://doi.org/10.1007/s00170-015-8208-6\">10.1007/s00170-015-8208-6</a>}, number={5–8}, journal={The International Journal of Advanced Manufacturing Technology}, publisher={Springer Science and Business Media LLC}, author={Tavana, Madjid and Zareinejad, Mohsen and Santos-Arteaga, Francisco J. and Kaviani, Mohamad Amin}, year={2016}, pages={1705–1721} }","short":"M. Tavana, M. Zareinejad, F.J. Santos-Arteaga, M.A. Kaviani, The International Journal of Advanced Manufacturing Technology 86 (2016) 1705–1721.","mla":"Tavana, Madjid, et al. “A Conceptual Analytic Network Model for Evaluating and Selecting Third-Party Reverse Logistics Providers.” <i>The International Journal of Advanced Manufacturing Technology</i>, vol. 86, no. 5–8, Springer Science and Business Media LLC, 2016, pp. 1705–21, doi:<a href=\"https://doi.org/10.1007/s00170-015-8208-6\">10.1007/s00170-015-8208-6</a>.","apa":"Tavana, M., Zareinejad, M., Santos-Arteaga, F. J., &#38; Kaviani, M. A. (2016). A conceptual analytic network model for evaluating and selecting third-party reverse logistics providers. <i>The International Journal of Advanced Manufacturing Technology</i>, <i>86</i>(5–8), 1705–1721. <a href=\"https://doi.org/10.1007/s00170-015-8208-6\">https://doi.org/10.1007/s00170-015-8208-6</a>","chicago":"Tavana, Madjid, Mohsen Zareinejad, Francisco J. Santos-Arteaga, and Mohamad Amin Kaviani. “A Conceptual Analytic Network Model for Evaluating and Selecting Third-Party Reverse Logistics Providers.” <i>The International Journal of Advanced Manufacturing Technology</i> 86, no. 5–8 (2016): 1705–21. <a href=\"https://doi.org/10.1007/s00170-015-8208-6\">https://doi.org/10.1007/s00170-015-8208-6</a>.","ieee":"M. Tavana, M. Zareinejad, F. J. Santos-Arteaga, and M. A. Kaviani, “A conceptual analytic network model for evaluating and selecting third-party reverse logistics providers,” <i>The International Journal of Advanced Manufacturing Technology</i>, vol. 86, no. 5–8, pp. 1705–1721, 2016, doi: <a href=\"https://doi.org/10.1007/s00170-015-8208-6\">10.1007/s00170-015-8208-6</a>.","ama":"Tavana M, Zareinejad M, Santos-Arteaga FJ, Kaviani MA. A conceptual analytic network model for evaluating and selecting third-party reverse logistics providers. <i>The International Journal of Advanced Manufacturing Technology</i>. 2016;86(5-8):1705-1721. doi:<a href=\"https://doi.org/10.1007/s00170-015-8208-6\">10.1007/s00170-015-8208-6</a>"},"intvolume":"        86","page":"1705-1721","year":"2016","issue":"5-8","publication_status":"published","publication_identifier":{"issn":["0268-3768","1433-3015"]},"doi":"10.1007/s00170-015-8208-6","title":"A conceptual analytic network model for evaluating and selecting third-party reverse logistics providers","author":[{"first_name":"Madjid","full_name":"Tavana, Madjid","id":"31858","last_name":"Tavana"},{"full_name":"Zareinejad, Mohsen","last_name":"Zareinejad","first_name":"Mohsen"},{"last_name":"Santos-Arteaga","full_name":"Santos-Arteaga, Francisco J.","first_name":"Francisco J."},{"first_name":"Mohamad Amin","full_name":"Kaviani, Mohamad Amin","last_name":"Kaviani"}],"date_created":"2024-05-11T11:20:13Z","volume":86,"date_updated":"2024-05-11T11:52:31Z","publisher":"Springer Science and Business Media LLC","status":"public","type":"journal_article","publication":"The International Journal of Advanced Manufacturing Technology","language":[{"iso":"eng"}],"user_id":"51811","department":[{"_id":"277"}],"_id":"54160"}]