[{"status":"public","user_id":"66695","volume":27,"_id":"62160","publisher":"Wiley","citation":{"short":"I.M. Kuşoğlu, S. Garg, A. Abel, P.V. Balachandran, S. Barcikowski, L. Becker, J.-S. Bernsmann, J. Boseila, C. Broeckmann, M. Coskun, M. Dreyer, M. East, M. Easton, N. Ellendt, S. Gann, B. Gökce, M. Goßling, J. Greiner, P. Gruber, M. Grünewald, K. Gurung, N. Hantke, F. Hengsbach, H. Holländer, B. Van Hooreweder, K.-P. Hoyer, Y. Huang, F. Huber, O. Kessler, B.Ö. Kısasöz, S. Kleszczynski, E. Koc, T. Kurzynowski, A. Kwade, S. Leupold, D. Liu, F. Lomo, A. Lüddecke, G.A. Luinstra, D.A. Mauchline, F. Meyer, L. Meyer, P. Middendorf, S. Nolte, M. Olejarczyk, L. Overmeyer, A. Pich, S. Platt, F. Radtke, R. Ramm, S.-K. Rittinghaus, R. Rothfelder, J. Rudloff, M. Schaper, M.L. Scheck, J.H. Schleifenbaum, M. Schmidt, J.T. Sehrt, Y.P. Shabanga, A. Sommereyns, R. Steuer, L.S. Tisha, A. Toenjes, C. Tuck, A. Vaghar, B. Vrancken, Z. Wang, S. Weber, J. Wegner, B.-X. Xu, Y. Yang, D. Zhang, E. Zhuravlev, A.R. Ziefuss, Advanced Engineering Materials 27 (2025).","chicago":"Kuşoğlu, Ihsan Murat, Sunidhi Garg, Arvid Abel, Prasanna V. Balachandran, Stephan Barcikowski, Louis Becker, Jan-Simeon Bernsmann, et al. “Large‐Scale Interlaboratory Study Along the Entire Process Chain of Laser Powder Bed Fusion: Bridging Variability, Standards, and Optimization across Metals and Polymers.” <i>Advanced Engineering Materials</i> 27, no. 14 (2025). <a href=\"https://doi.org/10.1002/adem.202402930\">https://doi.org/10.1002/adem.202402930</a>.","apa":"Kuşoğlu, I. M., Garg, S., Abel, A., Balachandran, P. V., Barcikowski, S., Becker, L., Bernsmann, J.-S., Boseila, J., Broeckmann, C., Coskun, M., Dreyer, M., East, M., Easton, M., Ellendt, N., Gann, S., Gökce, B., Goßling, M., Greiner, J., Gruber, P., … Ziefuss, A. R. (2025). Large‐Scale Interlaboratory Study Along the Entire Process Chain of Laser Powder Bed Fusion: Bridging Variability, Standards, and Optimization across Metals and Polymers. <i>Advanced Engineering Materials</i>, <i>27</i>(14), Article 2402930. <a href=\"https://doi.org/10.1002/adem.202402930\">https://doi.org/10.1002/adem.202402930</a>","ieee":"I. M. Kuşoğlu <i>et al.</i>, “Large‐Scale Interlaboratory Study Along the Entire Process Chain of Laser Powder Bed Fusion: Bridging Variability, Standards, and Optimization across Metals and Polymers,” <i>Advanced Engineering Materials</i>, vol. 27, no. 14, Art. no. 2402930, 2025, doi: <a href=\"https://doi.org/10.1002/adem.202402930\">10.1002/adem.202402930</a>.","ama":"Kuşoğlu IM, Garg S, Abel A, et al. Large‐Scale Interlaboratory Study Along the Entire Process Chain of Laser Powder Bed Fusion: Bridging Variability, Standards, and Optimization across Metals and Polymers. <i>Advanced Engineering Materials</i>. 2025;27(14). doi:<a href=\"https://doi.org/10.1002/adem.202402930\">10.1002/adem.202402930</a>","bibtex":"@article{Kuşoğlu_Garg_Abel_Balachandran_Barcikowski_Becker_Bernsmann_Boseila_Broeckmann_Coskun_et al._2025, title={Large‐Scale Interlaboratory Study Along the Entire Process Chain of Laser Powder Bed Fusion: Bridging Variability, Standards, and Optimization across Metals and Polymers}, volume={27}, DOI={<a href=\"https://doi.org/10.1002/adem.202402930\">10.1002/adem.202402930</a>}, number={142402930}, journal={Advanced Engineering Materials}, publisher={Wiley}, author={Kuşoğlu, Ihsan Murat and Garg, Sunidhi and Abel, Arvid and Balachandran, Prasanna V. and Barcikowski, Stephan and Becker, Louis and Bernsmann, Jan-Simeon and Boseila, Jonas and Broeckmann, Christoph and Coskun, Mert and et al.}, year={2025} }","mla":"Kuşoğlu, Ihsan Murat, et al. “Large‐Scale Interlaboratory Study Along the Entire Process Chain of Laser Powder Bed Fusion: Bridging Variability, Standards, and Optimization across Metals and Polymers.” <i>Advanced Engineering Materials</i>, vol. 27, no. 14, 2402930, Wiley, 2025, doi:<a href=\"https://doi.org/10.1002/adem.202402930\">10.1002/adem.202402930</a>."},"publication_status":"published","date_updated":"2025-11-10T15:05:59Z","intvolume":"        27","title":"Large‐Scale Interlaboratory Study Along the Entire Process Chain of Laser Powder Bed Fusion: Bridging Variability, Standards, and Optimization across Metals and Polymers","year":"2025","author":[{"first_name":"Ihsan Murat","last_name":"Kuşoğlu","full_name":"Kuşoğlu, Ihsan Murat"},{"full_name":"Garg, Sunidhi","last_name":"Garg","first_name":"Sunidhi"},{"full_name":"Abel, Arvid","first_name":"Arvid","last_name":"Abel"},{"full_name":"Balachandran, Prasanna V.","last_name":"Balachandran","first_name":"Prasanna V."},{"full_name":"Barcikowski, Stephan","last_name":"Barcikowski","first_name":"Stephan"},{"full_name":"Becker, Louis","first_name":"Louis","last_name":"Becker"},{"first_name":"Jan-Simeon","last_name":"Bernsmann","full_name":"Bernsmann, Jan-Simeon"},{"last_name":"Boseila","first_name":"Jonas","full_name":"Boseila, Jonas"},{"full_name":"Broeckmann, Christoph","last_name":"Broeckmann","first_name":"Christoph"},{"first_name":"Mert","last_name":"Coskun","full_name":"Coskun, Mert"},{"last_name":"Dreyer","orcid":"0000-0001-9560-9510","first_name":"Malte","full_name":"Dreyer, Malte","id":"66695"},{"full_name":"East, Mark","first_name":"Mark","last_name":"East"},{"first_name":"Mark","last_name":"Easton","full_name":"Easton, Mark"},{"first_name":"Nils","last_name":"Ellendt","full_name":"Ellendt, Nils"},{"last_name":"Gann","first_name":"Stan","full_name":"Gann, Stan"},{"full_name":"Gökce, Bilal","first_name":"Bilal","last_name":"Gökce"},{"full_name":"Goßling, Mareen","first_name":"Mareen","last_name":"Goßling"},{"first_name":"Joachim","last_name":"Greiner","full_name":"Greiner, Joachim"},{"full_name":"Gruber, Piotr","first_name":"Piotr","last_name":"Gruber"},{"last_name":"Grünewald","first_name":"Moritz","full_name":"Grünewald, Moritz"},{"last_name":"Gurung","first_name":"Kopila","full_name":"Gurung, Kopila"},{"last_name":"Hantke","first_name":"Nick","full_name":"Hantke, Nick"},{"first_name":"Florian","last_name":"Hengsbach","full_name":"Hengsbach, Florian","id":"14073"},{"last_name":"Holländer","first_name":"Hannes","full_name":"Holländer, Hannes"},{"full_name":"Van Hooreweder, Brecht","first_name":"Brecht","last_name":"Van Hooreweder"},{"id":"48411","full_name":"Hoyer, Kay-Peter","last_name":"Hoyer","first_name":"Kay-Peter"},{"first_name":"Yajiang","last_name":"Huang","full_name":"Huang, Yajiang"},{"full_name":"Huber, Florian","first_name":"Florian","last_name":"Huber"},{"full_name":"Kessler, Olaf","first_name":"Olaf","last_name":"Kessler"},{"first_name":"Burçin Özbay","last_name":"Kısasöz","full_name":"Kısasöz, Burçin Özbay"},{"first_name":"Stefan","last_name":"Kleszczynski","full_name":"Kleszczynski, Stefan"},{"full_name":"Koc, Ebubekir","last_name":"Koc","first_name":"Ebubekir"},{"full_name":"Kurzynowski, Tomasz","last_name":"Kurzynowski","first_name":"Tomasz"},{"last_name":"Kwade","first_name":"Arno","full_name":"Kwade, Arno"},{"last_name":"Leupold","first_name":"Simon","full_name":"Leupold, Simon"},{"full_name":"Liu, Dongmei","first_name":"Dongmei","last_name":"Liu"},{"last_name":"Lomo","first_name":"Felix","full_name":"Lomo, Felix"},{"last_name":"Lüddecke","first_name":"Arne","full_name":"Lüddecke, Arne"},{"last_name":"Luinstra","first_name":"Gerrit A.","full_name":"Luinstra, Gerrit A."},{"full_name":"Mauchline, David A.","first_name":"David A.","last_name":"Mauchline"},{"first_name":"Fabian","last_name":"Meyer","full_name":"Meyer, Fabian"},{"first_name":"Lars","last_name":"Meyer","full_name":"Meyer, Lars"},{"full_name":"Middendorf, Peter","first_name":"Peter","last_name":"Middendorf"},{"full_name":"Nolte, Stefan","last_name":"Nolte","first_name":"Stefan"},{"full_name":"Olejarczyk, Michał","last_name":"Olejarczyk","first_name":"Michał"},{"last_name":"Overmeyer","first_name":"Ludger","full_name":"Overmeyer, Ludger"},{"full_name":"Pich, Andrij","first_name":"Andrij","last_name":"Pich"},{"last_name":"Platt","first_name":"Sebastian","full_name":"Platt, Sebastian"},{"full_name":"Radtke, Felix","last_name":"Radtke","first_name":"Felix"},{"full_name":"Ramm, Roland","last_name":"Ramm","first_name":"Roland"},{"full_name":"Rittinghaus, Silja-Katharina","last_name":"Rittinghaus","first_name":"Silja-Katharina"},{"full_name":"Rothfelder, Richard","first_name":"Richard","last_name":"Rothfelder"},{"first_name":"Johannes","last_name":"Rudloff","full_name":"Rudloff, Johannes"},{"full_name":"Schaper, Mirko","last_name":"Schaper","first_name":"Mirko","id":"43720"},{"full_name":"Scheck, Marie Luise","last_name":"Scheck","first_name":"Marie Luise"},{"last_name":"Schleifenbaum","first_name":"Johannes Henrich","full_name":"Schleifenbaum, Johannes Henrich"},{"full_name":"Schmidt, Michael","first_name":"Michael","last_name":"Schmidt"},{"full_name":"Sehrt, Jan T.","first_name":"Jan T.","last_name":"Sehrt"},{"full_name":"Shabanga, Yvonne P.","first_name":"Yvonne P.","last_name":"Shabanga"},{"full_name":"Sommereyns, Alexander","first_name":"Alexander","last_name":"Sommereyns"},{"first_name":"Rabea","last_name":"Steuer","full_name":"Steuer, Rabea"},{"full_name":"Tisha, Layla Shams","first_name":"Layla Shams","last_name":"Tisha"},{"last_name":"Toenjes","first_name":"Anastasiya","full_name":"Toenjes, Anastasiya"},{"first_name":"Christopher","last_name":"Tuck","full_name":"Tuck, Christopher"},{"full_name":"Vaghar, Adrian","last_name":"Vaghar","first_name":"Adrian"},{"full_name":"Vrancken, Bey","first_name":"Bey","last_name":"Vrancken"},{"full_name":"Wang, Zhengze","last_name":"Wang","first_name":"Zhengze"},{"full_name":"Weber, Sebastian","first_name":"Sebastian","last_name":"Weber"},{"last_name":"Wegner","first_name":"Jan","full_name":"Wegner, Jan"},{"full_name":"Xu, Bai-Xiang","last_name":"Xu","first_name":"Bai-Xiang"},{"first_name":"Yangyiwei","last_name":"Yang","full_name":"Yang, Yangyiwei"},{"last_name":"Zhang","first_name":"Duyao","full_name":"Zhang, Duyao"},{"full_name":"Zhuravlev, Evgeny","first_name":"Evgeny","last_name":"Zhuravlev"},{"first_name":"Anna R.","last_name":"Ziefuss","full_name":"Ziefuss, Anna R."}],"publication_identifier":{"issn":["1438-1656","1527-2648"]},"doi":"10.1002/adem.202402930","article_number":"2402930","language":[{"iso":"eng"}],"abstract":[{"text":"<jats:p>Laser powder bed fusion is a cornerstone technology for additive manufacturing (AM) of metals and polymers, yet challenges in achieving consistent reproducibility and process optimization persist. Addressing these requires a systematic understanding of the interactions between feedstock, process parameters, and final part characteristics throughout the entire production chain. This study presents results from a comprehensive interlaboratory investigation conducted by 32 research institutions, evaluating six feedstock, including nanoparticle‐modified aluminum alloy and polyamide powders, under standardized protocols. Data analysis encompasses 69 powder properties, 15 process parameters per print, and 78 part features, culminating in a dataset of over 1.2 million correlations. Advanced statistical methods and machine learning are employed to identify critical variability drivers, such as the impact of nanoparticle modifications on powder flowability and thermal conductivity, as well as the influence of process parameters on reproducibility. Newly introduced dimensionless figures of merit provide universal metrics to describe and predict thermal and mechanical interactions, simplifying process optimization and material characterization. The findings, supported by an open‐access dataset adhering to findable, accessible, interoperable, and reusable principles, advance understanding of material–process–structure–property relationships. They establish a benchmark for future research and lay the foundation for improving the reliability, quality, and sustainability of AM processes.</jats:p>","lang":"eng"}],"publication":"Advanced Engineering Materials","issue":"14","type":"journal_article","date_created":"2025-11-10T14:56:57Z"},{"publication":"Advanced Engineering Materials","issue":"1","abstract":[{"text":"The tribological behavior of thermo‐responsive poly(N‐isopropylacrylamide) (PNIPAAm)‐based microgels is investigated for use as water‐dispersible lubricant additives. Two types of microgels are synthesized using a surfactant‐free emulsion polymerization method: MG0, consisting of pure PNIPAAm with a volume phase transition temperature (VPTT) of ≈33 °C, and MG16, consisting of PNIPAAm copolymerized with hydrophobic tert‐butyl acrylamide, exhibiting a lower VPTT of around 23 °C. Swelling and lubrication performance are evaluated at 20 and 40 °C. Both microgels significantly reduce friction and wear compared to water alone. At 20 °C, MG0 remains fully swollen and provides effective wear protection through hydrated microgel lubrication. MG16, being near its VPTT, exhibits partial collapse and slightly higher wear. At 40 °C, MG16 demonstrates improved wear resistance, attributed to enhanced film compaction in the collapsed state. Raman spectroscopy and scanning electron microscopy–energy‐dispersive X‐ray spectroscopy confirm that carbon‐rich tribofilms are formed via tribochemical reactions. MG0 produces more graphitic films, while MG16 generates amorphous carbon structures. These findings highlight the tunability of microgel composition for designing adaptive, water‐based lubricants for temperature‐sensitive applications.","lang":"eng"}],"date_created":"2026-03-11T08:53:17Z","department":[{"_id":"163"}],"type":"journal_article","publication_identifier":{"issn":["1438-1656","1527-2648"]},"author":[{"full_name":"Syed, Junaid","first_name":"Junaid","last_name":"Syed"},{"full_name":"Dyck, Florian","last_name":"Dyck","first_name":"Florian"},{"full_name":"Herberg, Artjom","first_name":"Artjom","last_name":"Herberg","id":"94"},{"id":"287","last_name":"Kuckling","first_name":"Dirk","full_name":"Kuckling, Dirk"},{"full_name":"Gosvami, Nitya Nand","last_name":"Gosvami","first_name":"Nitya Nand"}],"title":"Microgel Additives for Aqueous Lubrication: Tailoring Friction and Wear via Composition and Thermal Responsiveness","year":"2025","intvolume":"        28","article_type":"original","date_updated":"2026-03-11T08:56:26Z","publication_status":"published","language":[{"iso":"eng"}],"main_file_link":[{"url":"https://advanced.onlinelibrary.wiley.com/doi/10.1002/adem.202501673"}],"article_number":"e202501673","doi":"10.1002/adem.202501673","citation":{"chicago":"Syed, Junaid, Florian Dyck, Artjom Herberg, Dirk Kuckling, and Nitya Nand Gosvami. “Microgel Additives for Aqueous Lubrication: Tailoring Friction and Wear via Composition and Thermal Responsiveness.” <i>Advanced Engineering Materials</i> 28, no. 1 (2025). <a href=\"https://doi.org/10.1002/adem.202501673\">https://doi.org/10.1002/adem.202501673</a>.","short":"J. Syed, F. Dyck, A. Herberg, D. Kuckling, N.N. Gosvami, Advanced Engineering Materials 28 (2025).","apa":"Syed, J., Dyck, F., Herberg, A., Kuckling, D., &#38; Gosvami, N. N. (2025). Microgel Additives for Aqueous Lubrication: Tailoring Friction and Wear via Composition and Thermal Responsiveness. <i>Advanced Engineering Materials</i>, <i>28</i>(1), Article e202501673. <a href=\"https://doi.org/10.1002/adem.202501673\">https://doi.org/10.1002/adem.202501673</a>","ieee":"J. Syed, F. Dyck, A. Herberg, D. Kuckling, and N. N. Gosvami, “Microgel Additives for Aqueous Lubrication: Tailoring Friction and Wear via Composition and Thermal Responsiveness,” <i>Advanced Engineering Materials</i>, vol. 28, no. 1, Art. no. e202501673, 2025, doi: <a href=\"https://doi.org/10.1002/adem.202501673\">10.1002/adem.202501673</a>.","ama":"Syed J, Dyck F, Herberg A, Kuckling D, Gosvami NN. Microgel Additives for Aqueous Lubrication: Tailoring Friction and Wear via Composition and Thermal Responsiveness. <i>Advanced Engineering Materials</i>. 2025;28(1). doi:<a href=\"https://doi.org/10.1002/adem.202501673\">10.1002/adem.202501673</a>","bibtex":"@article{Syed_Dyck_Herberg_Kuckling_Gosvami_2025, title={Microgel Additives for Aqueous Lubrication: Tailoring Friction and Wear via Composition and Thermal Responsiveness}, volume={28}, DOI={<a href=\"https://doi.org/10.1002/adem.202501673\">10.1002/adem.202501673</a>}, number={1e202501673}, journal={Advanced Engineering Materials}, publisher={Wiley}, author={Syed, Junaid and Dyck, Florian and Herberg, Artjom and Kuckling, Dirk and Gosvami, Nitya Nand}, year={2025} }","mla":"Syed, Junaid, et al. “Microgel Additives for Aqueous Lubrication: Tailoring Friction and Wear via Composition and Thermal Responsiveness.” <i>Advanced Engineering Materials</i>, vol. 28, no. 1, e202501673, Wiley, 2025, doi:<a href=\"https://doi.org/10.1002/adem.202501673\">10.1002/adem.202501673</a>."},"status":"public","publisher":"Wiley","_id":"64885","volume":28,"user_id":"94"},{"status":"public","_id":"46507","publisher":"Wiley","volume":25,"user_id":"48411","citation":{"chicago":"Pramanik, Sudipta, Dennis Milaege, Maxwell Hein, Anatolii Andreiev, Mirko Schaper, and Kay-Peter Hoyer. “An Experimental and Computational Modeling Study on Additively Manufactured Micro‐Architectured Ti–24Nb–4Zr–8Sn Hollow‐Strut Lattice Structures.” <i>Advanced Engineering Materials</i> 25, no. 14 (2023). <a href=\"https://doi.org/10.1002/adem.202201850\">https://doi.org/10.1002/adem.202201850</a>.","short":"S. Pramanik, D. Milaege, M. Hein, A. Andreiev, M. Schaper, K.-P. Hoyer, Advanced Engineering Materials 25 (2023).","apa":"Pramanik, S., Milaege, D., Hein, M., Andreiev, A., Schaper, M., &#38; Hoyer, K.-P. (2023). An Experimental and Computational Modeling Study on Additively Manufactured Micro‐Architectured Ti–24Nb–4Zr–8Sn Hollow‐Strut Lattice Structures. <i>Advanced Engineering Materials</i>, <i>25</i>(14). <a href=\"https://doi.org/10.1002/adem.202201850\">https://doi.org/10.1002/adem.202201850</a>","ieee":"S. Pramanik, D. Milaege, M. Hein, A. Andreiev, M. Schaper, and K.-P. Hoyer, “An Experimental and Computational Modeling Study on Additively Manufactured Micro‐Architectured Ti–24Nb–4Zr–8Sn Hollow‐Strut Lattice Structures,” <i>Advanced Engineering Materials</i>, vol. 25, no. 14, 2023, doi: <a href=\"https://doi.org/10.1002/adem.202201850\">10.1002/adem.202201850</a>.","ama":"Pramanik S, Milaege D, Hein M, Andreiev A, Schaper M, Hoyer K-P. An Experimental and Computational Modeling Study on Additively Manufactured Micro‐Architectured Ti–24Nb–4Zr–8Sn Hollow‐Strut Lattice Structures. <i>Advanced Engineering Materials</i>. 2023;25(14). doi:<a href=\"https://doi.org/10.1002/adem.202201850\">10.1002/adem.202201850</a>","bibtex":"@article{Pramanik_Milaege_Hein_Andreiev_Schaper_Hoyer_2023, title={An Experimental and Computational Modeling Study on Additively Manufactured Micro‐Architectured Ti–24Nb–4Zr–8Sn Hollow‐Strut Lattice Structures}, volume={25}, DOI={<a href=\"https://doi.org/10.1002/adem.202201850\">10.1002/adem.202201850</a>}, number={14}, journal={Advanced Engineering Materials}, publisher={Wiley}, author={Pramanik, Sudipta and Milaege, Dennis and Hein, Maxwell and Andreiev, Anatolii and Schaper, Mirko and Hoyer, Kay-Peter}, year={2023} }","mla":"Pramanik, Sudipta, et al. “An Experimental and Computational Modeling Study on Additively Manufactured Micro‐Architectured Ti–24Nb–4Zr–8Sn Hollow‐Strut Lattice Structures.” <i>Advanced Engineering Materials</i>, vol. 25, no. 14, Wiley, 2023, doi:<a href=\"https://doi.org/10.1002/adem.202201850\">10.1002/adem.202201850</a>."},"quality_controlled":"1","author":[{"first_name":"Sudipta","last_name":"Pramanik","full_name":"Pramanik, Sudipta"},{"full_name":"Milaege, Dennis","first_name":"Dennis","last_name":"Milaege"},{"orcid":"0000-0002-3732-2236","last_name":"Hein","first_name":"Maxwell","full_name":"Hein, Maxwell","id":"52771"},{"id":"50215","full_name":"Andreiev, Anatolii","last_name":"Andreiev","first_name":"Anatolii"},{"id":"43720","last_name":"Schaper","first_name":"Mirko","full_name":"Schaper, Mirko"},{"id":"48411","last_name":"Hoyer","first_name":"Kay-Peter","full_name":"Hoyer, Kay-Peter"}],"publication_identifier":{"issn":["1438-1656","1527-2648"]},"title":"An Experimental and Computational Modeling Study on Additively Manufactured Micro‐Architectured Ti–24Nb–4Zr–8Sn Hollow‐Strut Lattice Structures","year":"2023","intvolume":"        25","publication_status":"published","date_updated":"2023-08-16T06:29:36Z","language":[{"iso":"eng"}],"doi":"10.1002/adem.202201850","publication":"Advanced Engineering Materials","issue":"14","date_created":"2023-08-16T06:27:19Z","department":[{"_id":"9"},{"_id":"158"}],"type":"journal_article","keyword":["Condensed Matter Physics","General Materials Science"]},{"citation":{"mla":"Neuser, Moritz, et al. “Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting.” <i>Advanced Engineering Materials</i>, vol. 24, no. 10, 2200874, Wiley, 2022, doi:<a href=\"https://doi.org/10.1002/adem.202200874\">10.1002/adem.202200874</a>.","ama":"Neuser M, Kappe F, Ostermeier J, et al. Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting. <i>Advanced Engineering Materials</i>. 2022;24(10). doi:<a href=\"https://doi.org/10.1002/adem.202200874\">10.1002/adem.202200874</a>","bibtex":"@article{Neuser_Kappe_Ostermeier_Krüger_Bobbert_Meschut_Schaper_Grydin_2022, title={Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting}, volume={24}, DOI={<a href=\"https://doi.org/10.1002/adem.202200874\">10.1002/adem.202200874</a>}, number={102200874}, journal={Advanced Engineering Materials}, publisher={Wiley}, author={Neuser, Moritz and Kappe, Fabian and Ostermeier, Jakob and Krüger, Jan Tobias and Bobbert, Mathias and Meschut, Gerson and Schaper, Mirko and Grydin, Olexandr}, year={2022} }","apa":"Neuser, M., Kappe, F., Ostermeier, J., Krüger, J. T., Bobbert, M., Meschut, G., Schaper, M., &#38; Grydin, O. (2022). Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting. <i>Advanced Engineering Materials</i>, <i>24</i>(10), Article 2200874. <a href=\"https://doi.org/10.1002/adem.202200874\">https://doi.org/10.1002/adem.202200874</a>","ieee":"M. Neuser <i>et al.</i>, “Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting,” <i>Advanced Engineering Materials</i>, vol. 24, no. 10, Art. no. 2200874, 2022, doi: <a href=\"https://doi.org/10.1002/adem.202200874\">10.1002/adem.202200874</a>.","short":"M. Neuser, F. Kappe, J. Ostermeier, J.T. Krüger, M. Bobbert, G. Meschut, M. Schaper, O. Grydin, Advanced Engineering Materials 24 (2022).","chicago":"Neuser, Moritz, Fabian Kappe, Jakob Ostermeier, Jan Tobias Krüger, Mathias Bobbert, Gerson Meschut, Mirko Schaper, and Olexandr Grydin. “Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting.” <i>Advanced Engineering Materials</i> 24, no. 10 (2022). <a href=\"https://doi.org/10.1002/adem.202200874\">https://doi.org/10.1002/adem.202200874</a>."},"project":[{"_id":"130","grant_number":"418701707","name":"TRR 285: TRR 285"},{"name":"TRR 285 - A: TRR 285 - Project Area A","_id":"131"},{"_id":"136","name":"TRR 285 – A02: TRR 285 - Subproject A02"},{"_id":"133","name":"TRR 285 - C: TRR 285 - Project Area C"},{"_id":"146","name":"TRR 285 – C02: TRR 285 - Subproject C02"}],"status":"public","_id":"34207","publisher":"Wiley","volume":24,"user_id":"7850","publication":"Advanced Engineering Materials","issue":"10","abstract":[{"lang":"eng","text":"AlSi casting alloys combine excellent castability with high strength. Hence, this group of alloys is often used in the automotive sector. The challenge for this application is the brittle character of these alloys which leads to cracks during joint formation when mechanical joining technologies are used. A rise in ductility can be achieved by a considerable increase in the solidification rate which results in grain refinement. High solidification rates can be realized in twin–roll casting (TRC) by water-cooled rolls. Therefore, a hypoeutectic EN AC–AlSi9 (for European Norm - aluminum cast product) is manufactured by the TRC process and analyzed. Subsequently, joining investigations are performed on castings in as-cast and heat-treated condition using the self-piercing riveting process considering the joint formation and the load-bearing capacity. Due to the fine microstructure, the crack initiation can be avoided during joining, while maintaining the joining parameters, especially by specimens in heat treatment conditions. Furthermore, due to the extremely fine microstructure, the load-bearing capacity of the joint can be significantly increased in terms of the maximum load-bearing force and the energy absorbed."}],"date_created":"2022-12-05T20:07:55Z","type":"journal_article","keyword":["Condensed Matter Physics","General Materials Science"],"publication_identifier":{"issn":["1438-1656","1527-2648"]},"author":[{"first_name":"Moritz","last_name":"Neuser","full_name":"Neuser, Moritz"},{"full_name":"Kappe, Fabian","last_name":"Kappe","first_name":"Fabian"},{"first_name":"Jakob","last_name":"Ostermeier","full_name":"Ostermeier, Jakob"},{"full_name":"Krüger, Jan Tobias","last_name":"Krüger","first_name":"Jan Tobias"},{"first_name":"Mathias","last_name":"Bobbert","full_name":"Bobbert, Mathias"},{"full_name":"Meschut, Gerson","first_name":"Gerson","last_name":"Meschut"},{"last_name":"Schaper","first_name":"Mirko","full_name":"Schaper, Mirko"},{"last_name":"Grydin","first_name":"Olexandr","full_name":"Grydin, Olexandr"}],"year":"2022","title":"Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting","intvolume":"        24","publication_status":"published","date_updated":"2022-12-05T20:09:50Z","language":[{"iso":"eng"}],"article_number":"2200874","doi":"10.1002/adem.202200874"},{"date_created":"2022-10-14T08:10:07Z","department":[{"_id":"156"}],"type":"journal_article","keyword":["Condensed Matter Physics","General Materials Science"],"citation":{"bibtex":"@article{Vieth_Borgert_Homberg_Grundmeier_2022, title={Assessment of mechanical and optical properties of Al 6060 alloy particles by removal of contaminants}, DOI={<a href=\"https://doi.org/10.1002/adem.202201081\">10.1002/adem.202201081</a>}, journal={Advanced Engineering Materials}, publisher={Wiley}, author={Vieth, Pascal and Borgert, Thomas and Homberg, Werner and Grundmeier, Guido}, year={2022} }","ama":"Vieth P, Borgert T, Homberg W, Grundmeier G. Assessment of mechanical and optical properties of Al 6060 alloy particles by removal of contaminants. <i>Advanced Engineering Materials</i>. Published online 2022. doi:<a href=\"https://doi.org/10.1002/adem.202201081\">10.1002/adem.202201081</a>","mla":"Vieth, Pascal, et al. “Assessment of Mechanical and Optical Properties of Al 6060 Alloy Particles by Removal of Contaminants.” <i>Advanced Engineering Materials</i>, Wiley, 2022, doi:<a href=\"https://doi.org/10.1002/adem.202201081\">10.1002/adem.202201081</a>.","short":"P. Vieth, T. Borgert, W. Homberg, G. Grundmeier, Advanced Engineering Materials (2022).","chicago":"Vieth, Pascal, Thomas Borgert, Werner Homberg, and Guido Grundmeier. “Assessment of Mechanical and Optical Properties of Al 6060 Alloy Particles by Removal of Contaminants.” <i>Advanced Engineering Materials</i>, 2022. <a href=\"https://doi.org/10.1002/adem.202201081\">https://doi.org/10.1002/adem.202201081</a>.","ieee":"P. Vieth, T. Borgert, W. Homberg, and G. Grundmeier, “Assessment of mechanical and optical properties of Al 6060 alloy particles by removal of contaminants,” <i>Advanced Engineering Materials</i>, 2022, doi: <a href=\"https://doi.org/10.1002/adem.202201081\">10.1002/adem.202201081</a>.","apa":"Vieth, P., Borgert, T., Homberg, W., &#38; Grundmeier, G. (2022). Assessment of mechanical and optical properties of Al 6060 alloy particles by removal of contaminants. <i>Advanced Engineering Materials</i>. <a href=\"https://doi.org/10.1002/adem.202201081\">https://doi.org/10.1002/adem.202201081</a>"},"publication":"Advanced Engineering Materials","quality_controlled":"1","_id":"33724","language":[{"iso":"eng"}],"publisher":"Wiley","doi":"10.1002/adem.202201081","user_id":"83141","author":[{"last_name":"Vieth","first_name":"Pascal","full_name":"Vieth, Pascal"},{"full_name":"Borgert, Thomas","first_name":"Thomas","last_name":"Borgert","id":"83141"},{"full_name":"Homberg, Werner","first_name":"Werner","last_name":"Homberg"},{"id":"194","last_name":"Grundmeier","first_name":"Guido","full_name":"Grundmeier, Guido"}],"publication_identifier":{"issn":["1438-1656","1527-2648"]},"title":"Assessment of mechanical and optical properties of Al 6060 alloy particles by removal of contaminants","year":"2022","status":"public","date_updated":"2023-04-26T13:26:02Z","publication_status":"published"},{"project":[{"grant_number":"418701707","_id":"130","name":"TRR 285: TRR 285"},{"name":"TRR 285 - C: TRR 285 - Project Area C","_id":"133"},{"name":"TRR 285 – C02: TRR 285 - Subproject C02","_id":"146"}],"quality_controlled":"1","citation":{"ieee":"M. Neuser <i>et al.</i>, “Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting,” <i>Advanced Engineering Materials</i>, vol. 24, no. 10, Art. no. 2200874, 2022, doi: <a href=\"https://doi.org/10.1002/adem.202200874\">10.1002/adem.202200874</a>.","apa":"Neuser, M., Kappe, F., Ostermeier, J., Krüger, J. T., Bobbert, M., Meschut, G., Schaper, M., &#38; Grydin, O. (2022). Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting. <i>Advanced Engineering Materials</i>, <i>24</i>(10), Article 2200874. <a href=\"https://doi.org/10.1002/adem.202200874\">https://doi.org/10.1002/adem.202200874</a>","chicago":"Neuser, Moritz, Fabian Kappe, Jakob Ostermeier, Jan Tobias Krüger, Mathias Bobbert, Gerson Meschut, Mirko Schaper, and Olexandr Grydin. “Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting.” <i>Advanced Engineering Materials</i> 24, no. 10 (2022). <a href=\"https://doi.org/10.1002/adem.202200874\">https://doi.org/10.1002/adem.202200874</a>.","short":"M. Neuser, F. Kappe, J. Ostermeier, J.T. Krüger, M. Bobbert, G. Meschut, M. Schaper, O. Grydin, Advanced Engineering Materials 24 (2022).","mla":"Neuser, Moritz, et al. “Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting.” <i>Advanced Engineering Materials</i>, vol. 24, no. 10, 2200874, Wiley, 2022, doi:<a href=\"https://doi.org/10.1002/adem.202200874\">10.1002/adem.202200874</a>.","bibtex":"@article{Neuser_Kappe_Ostermeier_Krüger_Bobbert_Meschut_Schaper_Grydin_2022, title={Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting}, volume={24}, DOI={<a href=\"https://doi.org/10.1002/adem.202200874\">10.1002/adem.202200874</a>}, number={102200874}, journal={Advanced Engineering Materials}, publisher={Wiley}, author={Neuser, Moritz and Kappe, Fabian and Ostermeier, Jakob and Krüger, Jan Tobias and Bobbert, Mathias and Meschut, Gerson and Schaper, Mirko and Grydin, Olexandr}, year={2022} }","ama":"Neuser M, Kappe F, Ostermeier J, et al. Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting. <i>Advanced Engineering Materials</i>. 2022;24(10). doi:<a href=\"https://doi.org/10.1002/adem.202200874\">10.1002/adem.202200874</a>"},"volume":24,"user_id":"66459","publisher":"Wiley","_id":"34242","status":"public","keyword":["Condensed Matter Physics","General Materials Science"],"type":"journal_article","date_created":"2022-12-06T13:50:32Z","issue":"10","publication":"Advanced Engineering Materials","doi":"10.1002/adem.202200874","language":[{"iso":"eng"}],"article_number":"2200874","intvolume":"        24","date_updated":"2023-04-27T08:54:57Z","publication_status":"published","author":[{"last_name":"Neuser","first_name":"Moritz","full_name":"Neuser, Moritz"},{"full_name":"Kappe, Fabian","last_name":"Kappe","first_name":"Fabian"},{"full_name":"Ostermeier, Jakob","first_name":"Jakob","last_name":"Ostermeier"},{"first_name":"Jan Tobias","last_name":"Krüger","full_name":"Krüger, Jan Tobias"},{"last_name":"Bobbert","first_name":"Mathias","full_name":"Bobbert, Mathias"},{"full_name":"Meschut, Gerson","last_name":"Meschut","first_name":"Gerson"},{"full_name":"Schaper, Mirko","first_name":"Mirko","last_name":"Schaper"},{"last_name":"Grydin","first_name":"Olexandr","full_name":"Grydin, Olexandr"}],"publication_identifier":{"issn":["1438-1656","1527-2648"]},"year":"2022","title":"Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting"},{"year":"2022","status":"public","title":"Characterization and analysis of plastic instability in an ultrafine‐grained medium Mn TRIP steel","author":[{"full_name":"Teng, Zhenjie","first_name":"Zhenjie","last_name":"Teng"},{"full_name":"Wu, Haoran","last_name":"Wu","first_name":"Haoran"},{"full_name":"Pramanik, Sudipta","first_name":"Sudipta","last_name":"Pramanik"},{"full_name":"Hoyer, Kay-Peter","first_name":"Kay-Peter","last_name":"Hoyer","id":"48411"},{"id":"43720","full_name":"Schaper, Mirko","first_name":"Mirko","last_name":"Schaper"},{"full_name":"Zhang, Hanlon","first_name":"Hanlon","last_name":"Zhang"},{"full_name":"Boller, Christian","first_name":"Christian","last_name":"Boller"},{"full_name":"Starke, Peter","last_name":"Starke","first_name":"Peter"}],"publication_identifier":{"issn":["1438-1656","1527-2648"]},"publication_status":"published","date_updated":"2023-04-27T16:43:36Z","publisher":"Wiley","_id":"31075","language":[{"iso":"eng"}],"user_id":"43720","doi":"10.1002/adem.202200022","publication":"Advanced Engineering Materials","citation":{"mla":"Teng, Zhenjie, et al. “Characterization and Analysis of Plastic Instability in an Ultrafine‐grained Medium Mn TRIP Steel.” <i>Advanced Engineering Materials</i>, Wiley, 2022, doi:<a href=\"https://doi.org/10.1002/adem.202200022\">10.1002/adem.202200022</a>.","bibtex":"@article{Teng_Wu_Pramanik_Hoyer_Schaper_Zhang_Boller_Starke_2022, title={Characterization and analysis of plastic instability in an ultrafine‐grained medium Mn TRIP steel}, DOI={<a href=\"https://doi.org/10.1002/adem.202200022\">10.1002/adem.202200022</a>}, journal={Advanced Engineering Materials}, publisher={Wiley}, author={Teng, Zhenjie and Wu, Haoran and Pramanik, Sudipta and Hoyer, Kay-Peter and Schaper, Mirko and Zhang, Hanlon and Boller, Christian and Starke, Peter}, year={2022} }","ama":"Teng Z, Wu H, Pramanik S, et al. Characterization and analysis of plastic instability in an ultrafine‐grained medium Mn TRIP steel. <i>Advanced Engineering Materials</i>. Published online 2022. doi:<a href=\"https://doi.org/10.1002/adem.202200022\">10.1002/adem.202200022</a>","ieee":"Z. Teng <i>et al.</i>, “Characterization and analysis of plastic instability in an ultrafine‐grained medium Mn TRIP steel,” <i>Advanced Engineering Materials</i>, 2022, doi: <a href=\"https://doi.org/10.1002/adem.202200022\">10.1002/adem.202200022</a>.","apa":"Teng, Z., Wu, H., Pramanik, S., Hoyer, K.-P., Schaper, M., Zhang, H., Boller, C., &#38; Starke, P. (2022). Characterization and analysis of plastic instability in an ultrafine‐grained medium Mn TRIP steel. <i>Advanced Engineering Materials</i>. <a href=\"https://doi.org/10.1002/adem.202200022\">https://doi.org/10.1002/adem.202200022</a>","short":"Z. Teng, H. Wu, S. Pramanik, K.-P. Hoyer, M. Schaper, H. Zhang, C. Boller, P. Starke, Advanced Engineering Materials (2022).","chicago":"Teng, Zhenjie, Haoran Wu, Sudipta Pramanik, Kay-Peter Hoyer, Mirko Schaper, Hanlon Zhang, Christian Boller, and Peter Starke. “Characterization and Analysis of Plastic Instability in an Ultrafine‐grained Medium Mn TRIP Steel.” <i>Advanced Engineering Materials</i>, 2022. <a href=\"https://doi.org/10.1002/adem.202200022\">https://doi.org/10.1002/adem.202200022</a>."},"quality_controlled":"1","date_created":"2022-05-07T12:29:54Z","type":"journal_article","keyword":["Condensed Matter Physics","General Materials Science"],"department":[{"_id":"9"},{"_id":"158"}]},{"doi":"10.1002/adem.202200022","article_number":"2200022","language":[{"iso":"eng"}],"publication_status":"published","date_updated":"2023-04-27T16:46:25Z","intvolume":"        24","year":"2022","title":"Characterization and Analysis of Plastic Instability in an Ultrafine‐Grained Medium Mn TRIP Steel","publication_identifier":{"issn":["1438-1656","1527-2648"]},"author":[{"last_name":"Teng","first_name":"Zhenjie","full_name":"Teng, Zhenjie"},{"first_name":"Haoran","last_name":"Wu","full_name":"Wu, Haoran"},{"last_name":"Pramanik","first_name":"Sudipta","full_name":"Pramanik, Sudipta"},{"first_name":"Kay-Peter","last_name":"Hoyer","full_name":"Hoyer, Kay-Peter","id":"48411"},{"id":"43720","full_name":"Schaper, Mirko","last_name":"Schaper","first_name":"Mirko"},{"first_name":"Hanlong","last_name":"Zhang","full_name":"Zhang, Hanlong"},{"full_name":"Boller, Christian","first_name":"Christian","last_name":"Boller"},{"full_name":"Starke, Peter","first_name":"Peter","last_name":"Starke"}],"type":"journal_article","keyword":["Condensed Matter Physics","General Materials Science"],"department":[{"_id":"9"},{"_id":"158"}],"date_created":"2023-02-02T14:29:36Z","issue":"9","publication":"Advanced Engineering Materials","user_id":"43720","volume":24,"publisher":"Wiley","_id":"41502","status":"public","quality_controlled":"1","citation":{"chicago":"Teng, Zhenjie, Haoran Wu, Sudipta Pramanik, Kay-Peter Hoyer, Mirko Schaper, Hanlong Zhang, Christian Boller, and Peter Starke. “Characterization and Analysis of Plastic Instability in an Ultrafine‐Grained Medium Mn TRIP Steel.” <i>Advanced Engineering Materials</i> 24, no. 9 (2022). <a href=\"https://doi.org/10.1002/adem.202200022\">https://doi.org/10.1002/adem.202200022</a>.","short":"Z. Teng, H. Wu, S. Pramanik, K.-P. Hoyer, M. Schaper, H. Zhang, C. Boller, P. Starke, Advanced Engineering Materials 24 (2022).","ieee":"Z. Teng <i>et al.</i>, “Characterization and Analysis of Plastic Instability in an Ultrafine‐Grained Medium Mn TRIP Steel,” <i>Advanced Engineering Materials</i>, vol. 24, no. 9, Art. no. 2200022, 2022, doi: <a href=\"https://doi.org/10.1002/adem.202200022\">10.1002/adem.202200022</a>.","apa":"Teng, Z., Wu, H., Pramanik, S., Hoyer, K.-P., Schaper, M., Zhang, H., Boller, C., &#38; Starke, P. (2022). Characterization and Analysis of Plastic Instability in an Ultrafine‐Grained Medium Mn TRIP Steel. <i>Advanced Engineering Materials</i>, <i>24</i>(9), Article 2200022. <a href=\"https://doi.org/10.1002/adem.202200022\">https://doi.org/10.1002/adem.202200022</a>","bibtex":"@article{Teng_Wu_Pramanik_Hoyer_Schaper_Zhang_Boller_Starke_2022, title={Characterization and Analysis of Plastic Instability in an Ultrafine‐Grained Medium Mn TRIP Steel}, volume={24}, DOI={<a href=\"https://doi.org/10.1002/adem.202200022\">10.1002/adem.202200022</a>}, number={92200022}, journal={Advanced Engineering Materials}, publisher={Wiley}, author={Teng, Zhenjie and Wu, Haoran and Pramanik, Sudipta and Hoyer, Kay-Peter and Schaper, Mirko and Zhang, Hanlong and Boller, Christian and Starke, Peter}, year={2022} }","ama":"Teng Z, Wu H, Pramanik S, et al. Characterization and Analysis of Plastic Instability in an Ultrafine‐Grained Medium Mn TRIP Steel. <i>Advanced Engineering Materials</i>. 2022;24(9). doi:<a href=\"https://doi.org/10.1002/adem.202200022\">10.1002/adem.202200022</a>","mla":"Teng, Zhenjie, et al. “Characterization and Analysis of Plastic Instability in an Ultrafine‐Grained Medium Mn TRIP Steel.” <i>Advanced Engineering Materials</i>, vol. 24, no. 9, 2200022, Wiley, 2022, doi:<a href=\"https://doi.org/10.1002/adem.202200022\">10.1002/adem.202200022</a>."}},{"publication":"Advanced Engineering Materials","citation":{"bibtex":"@article{Krüger_Hoyer_Andreiev_Schaper_Zinn_2022, title={Modification of Iron with Degradable Silver Phases Processed via Laser Beam Melting for Implants with Adapted Degradation Rate}, DOI={<a href=\"https://doi.org/10.1002/adem.202201008\">10.1002/adem.202201008</a>}, number={2201008}, journal={Advanced Engineering Materials}, publisher={Wiley}, author={Krüger, Jan Tobias and Hoyer, Kay-Peter and Andreiev, Anatolii and Schaper, Mirko and Zinn, Carolin}, year={2022} }","ama":"Krüger JT, Hoyer K-P, Andreiev A, Schaper M, Zinn C. Modification of Iron with Degradable Silver Phases Processed via Laser Beam Melting for Implants with Adapted Degradation Rate. <i>Advanced Engineering Materials</i>. Published online 2022. doi:<a href=\"https://doi.org/10.1002/adem.202201008\">10.1002/adem.202201008</a>","mla":"Krüger, Jan Tobias, et al. “Modification of Iron with Degradable Silver Phases Processed via Laser Beam Melting for Implants with Adapted Degradation Rate.” <i>Advanced Engineering Materials</i>, 2201008, Wiley, 2022, doi:<a href=\"https://doi.org/10.1002/adem.202201008\">10.1002/adem.202201008</a>.","short":"J.T. Krüger, K.-P. Hoyer, A. Andreiev, M. Schaper, C. Zinn, Advanced Engineering Materials (2022).","chicago":"Krüger, Jan Tobias, Kay-Peter Hoyer, Anatolii Andreiev, Mirko Schaper, and Carolin Zinn. “Modification of Iron with Degradable Silver Phases Processed via Laser Beam Melting for Implants with Adapted Degradation Rate.” <i>Advanced Engineering Materials</i>, 2022. <a href=\"https://doi.org/10.1002/adem.202201008\">https://doi.org/10.1002/adem.202201008</a>.","ieee":"J. T. Krüger, K.-P. Hoyer, A. Andreiev, M. Schaper, and C. Zinn, “Modification of Iron with Degradable Silver Phases Processed via Laser Beam Melting for Implants with Adapted Degradation Rate,” <i>Advanced Engineering Materials</i>, Art. no. 2201008, 2022, doi: <a href=\"https://doi.org/10.1002/adem.202201008\">10.1002/adem.202201008</a>.","apa":"Krüger, J. T., Hoyer, K.-P., Andreiev, A., Schaper, M., &#38; Zinn, C. (2022). Modification of Iron with Degradable Silver Phases Processed via Laser Beam Melting for Implants with Adapted Degradation Rate. <i>Advanced Engineering Materials</i>, Article 2201008. <a href=\"https://doi.org/10.1002/adem.202201008\">https://doi.org/10.1002/adem.202201008</a>"},"type":"journal_article","keyword":["Condensed Matter Physics","General Materials Science"],"department":[{"_id":"9"},{"_id":"158"}],"date_created":"2023-02-02T14:25:30Z","date_updated":"2023-04-27T16:46:44Z","publication_status":"published","status":"public","year":"2022","title":"Modification of Iron with Degradable Silver Phases Processed via Laser Beam Melting for Implants with Adapted Degradation Rate","publication_identifier":{"issn":["1438-1656","1527-2648"]},"author":[{"id":"44307","full_name":"Krüger, Jan Tobias","first_name":"Jan Tobias","orcid":"0000-0002-0827-9654","last_name":"Krüger"},{"id":"48411","full_name":"Hoyer, Kay-Peter","first_name":"Kay-Peter","last_name":"Hoyer"},{"last_name":"Andreiev","first_name":"Anatolii","full_name":"Andreiev, Anatolii","id":"50215"},{"last_name":"Schaper","first_name":"Mirko","full_name":"Schaper, Mirko","id":"43720"},{"full_name":"Zinn, Carolin","first_name":"Carolin","last_name":"Zinn"}],"doi":"10.1002/adem.202201008","user_id":"48411","article_number":"2201008","_id":"41493","language":[{"iso":"eng"}],"publisher":"Wiley"},{"project":[{"name":"TRR 285 – A02: TRR 285 - Subproject A02","_id":"136"},{"name":"TRR 285 - A: TRR 285 - Project Area A","_id":"131"},{"_id":"133","name":"TRR 285 - C: TRR 285 - Project Area C"},{"_id":"146","name":"TRR 285 – C02: TRR 285 - Subproject C02"},{"name":"TRR 285:  Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen Prozessketten","_id":"130"}],"quality_controlled":"1","citation":{"ama":"Neuser M, Kappe F, Ostermeier J, et al. Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting. <i>Advanced Engineering Materials</i>. 2022;24(10). doi:<a href=\"https://doi.org/10.1002/adem.202200874\">10.1002/adem.202200874</a>","bibtex":"@article{Neuser_Kappe_Ostermeier_Krüger_Bobbert_Meschut_Schaper_Grydin_2022, title={Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting}, volume={24}, DOI={<a href=\"https://doi.org/10.1002/adem.202200874\">10.1002/adem.202200874</a>}, number={102200874}, journal={Advanced Engineering Materials}, publisher={Wiley}, author={Neuser, Moritz and Kappe, Fabian and Ostermeier, Jakob and Krüger, Jan Tobias and Bobbert, Mathias and Meschut, Gerson and Schaper, Mirko and Grydin, Olexandr}, year={2022} }","mla":"Neuser, Moritz, et al. “Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting.” <i>Advanced Engineering Materials</i>, vol. 24, no. 10, 2200874, Wiley, 2022, doi:<a href=\"https://doi.org/10.1002/adem.202200874\">10.1002/adem.202200874</a>.","short":"M. Neuser, F. Kappe, J. Ostermeier, J.T. Krüger, M. Bobbert, G. Meschut, M. Schaper, O. Grydin, Advanced Engineering Materials 24 (2022).","chicago":"Neuser, Moritz, Fabian Kappe, Jakob Ostermeier, Jan Tobias Krüger, Mathias Bobbert, Gerson Meschut, Mirko Schaper, and Olexandr Grydin. “Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting.” <i>Advanced Engineering Materials</i> 24, no. 10 (2022). <a href=\"https://doi.org/10.1002/adem.202200874\">https://doi.org/10.1002/adem.202200874</a>.","apa":"Neuser, M., Kappe, F., Ostermeier, J., Krüger, J. T., Bobbert, M., Meschut, G., Schaper, M., &#38; Grydin, O. (2022). Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting. <i>Advanced Engineering Materials</i>, <i>24</i>(10), Article 2200874. <a href=\"https://doi.org/10.1002/adem.202200874\">https://doi.org/10.1002/adem.202200874</a>","ieee":"M. Neuser <i>et al.</i>, “Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting,” <i>Advanced Engineering Materials</i>, vol. 24, no. 10, Art. no. 2200874, 2022, doi: <a href=\"https://doi.org/10.1002/adem.202200874\">10.1002/adem.202200874</a>."},"oa":"1","status":"public","volume":24,"user_id":"7850","publisher":"Wiley","_id":"36332","abstract":[{"lang":"eng","text":"AlSi casting alloys combine excellent castability with high strength. Hence, this group of alloys is often used in the automotive sector. The challenge for this application is the brittle character of these alloys which leads to cracks during joint formation when mechanical joining technologies are used. A rise in ductility can be achieved by a considerable increase in the solidification rate which results in grain refinement. High solidification rates can be realized in twin–roll casting (TRC) by water-cooled rolls. Therefore, a hypoeutectic EN AC–AlSi9 (for European Norm - aluminum cast product) is manufactured by the TRC process and analyzed. Subsequently, joining investigations are performed on castings in as-cast and heat-treated condition using the self-piercing riveting process considering the joint formation and the load-bearing capacity. Due to the fine microstructure, the crack initiation can be avoided during joining, while maintaining the joining parameters, especially by specimens in heat treatment conditions. Furthermore, due to the extremely fine microstructure, the load-bearing capacity of the joint can be significantly increased in terms of the maximum load-bearing force and the energy absorbed."}],"publication":"Advanced Engineering Materials","issue":"10","department":[{"_id":"158"},{"_id":"157"},{"_id":"321"}],"keyword":["Condensed Matter Physics","General Materials Science"],"type":"journal_article","date_created":"2023-01-12T09:33:55Z","intvolume":"        24","article_type":"original","date_updated":"2026-05-12T12:15:46Z","publication_status":"published","author":[{"id":"32340","first_name":"Moritz","last_name":"Neuser","full_name":"Neuser, Moritz"},{"id":"66459","full_name":"Kappe, Fabian","last_name":"Kappe","first_name":"Fabian"},{"last_name":"Ostermeier","first_name":"Jakob","full_name":"Ostermeier, Jakob"},{"id":"44307","first_name":"Jan Tobias","orcid":"0000-0002-0827-9654","last_name":"Krüger","full_name":"Krüger, Jan Tobias"},{"id":"7850","last_name":"Bobbert","first_name":"Mathias","full_name":"Bobbert, Mathias"},{"id":"32056","full_name":"Meschut, Gerson","orcid":"0000-0002-2763-1246","first_name":"Gerson","last_name":"Meschut"},{"id":"43720","full_name":"Schaper, Mirko","first_name":"Mirko","last_name":"Schaper"},{"id":"43822","full_name":"Grydin, Olexandr","first_name":"Olexandr","last_name":"Grydin"}],"publication_identifier":{"issn":["1438-1656","1527-2648"]},"title":"Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting","year":"2022","doi":"10.1002/adem.202200874","language":[{"iso":"eng"}],"main_file_link":[{"open_access":"1","url":"https://onlinelibrary.wiley.com/doi/full/10.1002/adem.202200874"}],"article_number":"2200874"},{"doi":"10.1002/adem.202100446","language":[{"iso":"eng"}],"article_number":"2100446","intvolume":"        23","publication_status":"published","date_updated":"2022-12-21T09:31:52Z","publication_identifier":{"issn":["1438-1656","1527-2648"]},"author":[{"full_name":"Tripathi, Tripurari Sharan","last_name":"Tripathi","first_name":"Tripurari Sharan"},{"full_name":"Wilken, Martin","first_name":"Martin","last_name":"Wilken"},{"first_name":"Christian","last_name":"Hoppe","full_name":"Hoppe, Christian","id":"27401"},{"last_name":"de los Arcos","first_name":"Teresa","full_name":"de los Arcos, Teresa"},{"first_name":"Guido","last_name":"Grundmeier","full_name":"Grundmeier, Guido","id":"194"},{"full_name":"Devi, Anjana","last_name":"Devi","first_name":"Anjana"},{"full_name":"Karppinen, Maarit","first_name":"Maarit","last_name":"Karppinen"}],"year":"2021","title":"Atomic Layer Deposition of Copper Metal Films from Cu(acac)            <sub>2</sub>            and Hydroquinone Reductant","department":[{"_id":"302"}],"keyword":["Condensed Matter Physics","General Materials Science"],"type":"journal_article","date_created":"2022-12-21T09:30:44Z","issue":"10","publication":"Advanced Engineering Materials","volume":23,"user_id":"48864","publisher":"Wiley","_id":"34645","status":"public","citation":{"apa":"Tripathi, T. S., Wilken, M., Hoppe, C., de los Arcos, T., Grundmeier, G., Devi, A., &#38; Karppinen, M. (2021). Atomic Layer Deposition of Copper Metal Films from Cu(acac)            <sub>2</sub>            and Hydroquinone Reductant. <i>Advanced Engineering Materials</i>, <i>23</i>(10), Article 2100446. <a href=\"https://doi.org/10.1002/adem.202100446\">https://doi.org/10.1002/adem.202100446</a>","ieee":"T. S. Tripathi <i>et al.</i>, “Atomic Layer Deposition of Copper Metal Films from Cu(acac)            <sub>2</sub>            and Hydroquinone Reductant,” <i>Advanced Engineering Materials</i>, vol. 23, no. 10, Art. no. 2100446, 2021, doi: <a href=\"https://doi.org/10.1002/adem.202100446\">10.1002/adem.202100446</a>.","short":"T.S. Tripathi, M. Wilken, C. Hoppe, T. de los Arcos, G. Grundmeier, A. Devi, M. Karppinen, Advanced Engineering Materials 23 (2021).","chicago":"Tripathi, Tripurari Sharan, Martin Wilken, Christian Hoppe, Teresa de los Arcos, Guido Grundmeier, Anjana Devi, and Maarit Karppinen. “Atomic Layer Deposition of Copper Metal Films from Cu(Acac)            <sub>2</sub>            and Hydroquinone Reductant.” <i>Advanced Engineering Materials</i> 23, no. 10 (2021). <a href=\"https://doi.org/10.1002/adem.202100446\">https://doi.org/10.1002/adem.202100446</a>.","mla":"Tripathi, Tripurari Sharan, et al. “Atomic Layer Deposition of Copper Metal Films from Cu(Acac)            <sub>2</sub>            and Hydroquinone Reductant.” <i>Advanced Engineering Materials</i>, vol. 23, no. 10, 2100446, Wiley, 2021, doi:<a href=\"https://doi.org/10.1002/adem.202100446\">10.1002/adem.202100446</a>.","ama":"Tripathi TS, Wilken M, Hoppe C, et al. Atomic Layer Deposition of Copper Metal Films from Cu(acac)            <sub>2</sub>            and Hydroquinone Reductant. <i>Advanced Engineering Materials</i>. 2021;23(10). doi:<a href=\"https://doi.org/10.1002/adem.202100446\">10.1002/adem.202100446</a>","bibtex":"@article{Tripathi_Wilken_Hoppe_de los Arcos_Grundmeier_Devi_Karppinen_2021, title={Atomic Layer Deposition of Copper Metal Films from Cu(acac)            <sub>2</sub>            and Hydroquinone Reductant}, volume={23}, DOI={<a href=\"https://doi.org/10.1002/adem.202100446\">10.1002/adem.202100446</a>}, number={102100446}, journal={Advanced Engineering Materials}, publisher={Wiley}, author={Tripathi, Tripurari Sharan and Wilken, Martin and Hoppe, Christian and de los Arcos, Teresa and Grundmeier, Guido and Devi, Anjana and Karppinen, Maarit}, year={2021} }"}},{"department":[{"_id":"158"},{"_id":"321"}],"type":"journal_article","date_created":"2021-09-08T07:29:58Z","quality_controlled":"1","citation":{"ieee":"O. Grydin, M. Matzelt, A. Andreiev, Y. Frolov, and M. Schaper, “Influence of Microstructure in Near‐Surface Areas of Feedstocks on the Bond Strength of Roll Bonded Aluminum Clads,” <i>Advanced Engineering Materials</i>, Art. no. 2000130, 2020, doi: <a href=\"https://doi.org/10.1002/adem.202000130\">10.1002/adem.202000130</a>.","apa":"Grydin, O., Matzelt, M., Andreiev, A., Frolov, Y., &#38; Schaper, M. (2020). Influence of Microstructure in Near‐Surface Areas of Feedstocks on the Bond Strength of Roll Bonded Aluminum Clads. <i>Advanced Engineering Materials</i>, Article 2000130. <a href=\"https://doi.org/10.1002/adem.202000130\">https://doi.org/10.1002/adem.202000130</a>","short":"O. Grydin, M. Matzelt, A. Andreiev, Y. Frolov, M. Schaper, Advanced Engineering Materials (2020).","chicago":"Grydin, Olexandr, Manuel Matzelt, Anatolii Andreiev, Yaroslav Frolov, and Mirko Schaper. “Influence of Microstructure in Near‐Surface Areas of Feedstocks on the Bond Strength of Roll Bonded Aluminum Clads.” <i>Advanced Engineering Materials</i>, 2020. <a href=\"https://doi.org/10.1002/adem.202000130\">https://doi.org/10.1002/adem.202000130</a>.","mla":"Grydin, Olexandr, et al. “Influence of Microstructure in Near‐Surface Areas of Feedstocks on the Bond Strength of Roll Bonded Aluminum Clads.” <i>Advanced Engineering Materials</i>, 2000130, 2020, doi:<a href=\"https://doi.org/10.1002/adem.202000130\">10.1002/adem.202000130</a>.","bibtex":"@article{Grydin_Matzelt_Andreiev_Frolov_Schaper_2020, title={Influence of Microstructure in Near‐Surface Areas of Feedstocks on the Bond Strength of Roll Bonded Aluminum Clads}, DOI={<a href=\"https://doi.org/10.1002/adem.202000130\">10.1002/adem.202000130</a>}, number={2000130}, journal={Advanced Engineering Materials}, author={Grydin, Olexandr and Matzelt, Manuel and Andreiev, Anatolii and Frolov, Yaroslav and Schaper, Mirko}, year={2020} }","ama":"Grydin O, Matzelt M, Andreiev A, Frolov Y, Schaper M. Influence of Microstructure in Near‐Surface Areas of Feedstocks on the Bond Strength of Roll Bonded Aluminum Clads. <i>Advanced Engineering Materials</i>. Published online 2020. doi:<a href=\"https://doi.org/10.1002/adem.202000130\">10.1002/adem.202000130</a>"},"publication":"Advanced Engineering Materials","doi":"10.1002/adem.202000130","user_id":"43720","language":[{"iso":"eng"}],"_id":"23899","article_number":"2000130","date_updated":"2023-06-01T14:32:53Z","publication_status":"published","author":[{"first_name":"Olexandr","last_name":"Grydin","full_name":"Grydin, Olexandr","id":"43822"},{"full_name":"Matzelt, Manuel","first_name":"Manuel","last_name":"Matzelt"},{"full_name":"Andreiev, Anatolii","first_name":"Anatolii","last_name":"Andreiev","id":"50215"},{"full_name":"Frolov, Yaroslav","first_name":"Yaroslav","last_name":"Frolov"},{"last_name":"Schaper","first_name":"Mirko","full_name":"Schaper, Mirko","id":"43720"}],"publication_identifier":{"issn":["1438-1656","1527-2648"]},"status":"public","year":"2020","title":"Influence of Microstructure in Near‐Surface Areas of Feedstocks on the Bond Strength of Roll Bonded Aluminum Clads"},{"publication":"Advanced Engineering Materials","citation":{"mla":"Grydin, Olexandr, et al. “Relationships between Microstructural and Mechanical Performance on Example of an Air‐Hardening Steel.” <i>Advanced Engineering Materials</i>, 1900134, 2019, doi:<a href=\"https://doi.org/10.1002/adem.201900134\">10.1002/adem.201900134</a>.","ama":"Grydin O, Andreiev A, Zogaj M, Frolov Y, Schaper M. Relationships between Microstructural and Mechanical Performance on Example of an Air‐Hardening Steel. <i>Advanced Engineering Materials</i>. Published online 2019. doi:<a href=\"https://doi.org/10.1002/adem.201900134\">10.1002/adem.201900134</a>","bibtex":"@article{Grydin_Andreiev_Zogaj_Frolov_Schaper_2019, title={Relationships between Microstructural and Mechanical Performance on Example of an Air‐Hardening Steel}, DOI={<a href=\"https://doi.org/10.1002/adem.201900134\">10.1002/adem.201900134</a>}, number={1900134}, journal={Advanced Engineering Materials}, author={Grydin, Olexandr and Andreiev, Anatolii and Zogaj, Mergim and Frolov, Yaroslav and Schaper, Mirko}, year={2019} }","apa":"Grydin, O., Andreiev, A., Zogaj, M., Frolov, Y., &#38; Schaper, M. (2019). Relationships between Microstructural and Mechanical Performance on Example of an Air‐Hardening Steel. <i>Advanced Engineering Materials</i>, Article 1900134. <a href=\"https://doi.org/10.1002/adem.201900134\">https://doi.org/10.1002/adem.201900134</a>","ieee":"O. Grydin, A. Andreiev, M. Zogaj, Y. Frolov, and M. Schaper, “Relationships between Microstructural and Mechanical Performance on Example of an Air‐Hardening Steel,” <i>Advanced Engineering Materials</i>, Art. no. 1900134, 2019, doi: <a href=\"https://doi.org/10.1002/adem.201900134\">10.1002/adem.201900134</a>.","short":"O. Grydin, A. Andreiev, M. Zogaj, Y. Frolov, M. Schaper, Advanced Engineering Materials (2019).","chicago":"Grydin, Olexandr, Anatolii Andreiev, Mergim Zogaj, Yaroslav Frolov, and Mirko Schaper. “Relationships between Microstructural and Mechanical Performance on Example of an Air‐Hardening Steel.” <i>Advanced Engineering Materials</i>, 2019. <a href=\"https://doi.org/10.1002/adem.201900134\">https://doi.org/10.1002/adem.201900134</a>."},"quality_controlled":"1","date_created":"2021-09-08T07:30:23Z","type":"journal_article","department":[{"_id":"158"},{"_id":"321"}],"status":"public","year":"2019","title":"Relationships between Microstructural and Mechanical Performance on Example of an Air‐Hardening Steel","author":[{"id":"43822","full_name":"Grydin, Olexandr","first_name":"Olexandr","last_name":"Grydin"},{"id":"50215","first_name":"Anatolii","last_name":"Andreiev","full_name":"Andreiev, Anatolii"},{"last_name":"Zogaj","first_name":"Mergim","full_name":"Zogaj, Mergim"},{"last_name":"Frolov","first_name":"Yaroslav","full_name":"Frolov, Yaroslav"},{"id":"43720","full_name":"Schaper, Mirko","first_name":"Mirko","last_name":"Schaper"}],"publication_identifier":{"issn":["1438-1656","1527-2648"]},"publication_status":"published","date_updated":"2023-06-01T14:28:17Z","article_number":"1900134","language":[{"iso":"eng"}],"_id":"23901","user_id":"43720","doi":"10.1002/adem.201900134"},{"doi":"10.1002/adem.201800290","article_number":"1800290","language":[{"iso":"eng"}],"date_updated":"2022-01-06T06:53:20Z","publication_status":"published","intvolume":"        20","year":"2018","title":"Additive Manufacturing of Porous Structures for Unmanned Aerial Vehicles Applications","author":[{"last_name":"Klippstein","first_name":"Sven Helge","full_name":"Klippstein, Sven Helge","id":"71545"},{"full_name":"Hassanin, Hany","last_name":"Hassanin","first_name":"Hany"},{"full_name":"Diaz De Cerio Sanchez, Alejandro","last_name":"Diaz De Cerio Sanchez","first_name":"Alejandro"},{"first_name":"Yahya","last_name":"Zweiri","full_name":"Zweiri, Yahya"},{"last_name":"Seneviratne","first_name":"Lakmal","full_name":"Seneviratne, Lakmal"}],"publication_identifier":{"issn":["1438-1656"]},"type":"journal_article","date_created":"2020-08-12T07:51:26Z","extern":"1","publication":"Advanced Engineering Materials","issue":"2","user_id":"71545","volume":20,"_id":"17835","status":"public","quality_controlled":"1","citation":{"ieee":"S. H. Klippstein, H. Hassanin, A. Diaz De Cerio Sanchez, Y. Zweiri, and L. Seneviratne, “Additive Manufacturing of Porous Structures for Unmanned Aerial Vehicles Applications,” <i>Advanced Engineering Materials</i>, vol. 20, no. 2, Art. no. 1800290, 2018, doi: <a href=\"https://doi.org/10.1002/adem.201800290\">10.1002/adem.201800290</a>.","apa":"Klippstein, S. H., Hassanin, H., Diaz De Cerio Sanchez, A., Zweiri, Y., &#38; Seneviratne, L. (2018). Additive Manufacturing of Porous Structures for Unmanned Aerial Vehicles Applications. <i>Advanced Engineering Materials</i>, <i>20</i>(2), Article 1800290. <a href=\"https://doi.org/10.1002/adem.201800290\">https://doi.org/10.1002/adem.201800290</a>","short":"S.H. Klippstein, H. Hassanin, A. Diaz De Cerio Sanchez, Y. Zweiri, L. Seneviratne, Advanced Engineering Materials 20 (2018).","chicago":"Klippstein, Sven Helge, Hany Hassanin, Alejandro Diaz De Cerio Sanchez, Yahya Zweiri, and Lakmal Seneviratne. “Additive Manufacturing of Porous Structures for Unmanned Aerial Vehicles Applications.” <i>Advanced Engineering Materials</i> 20, no. 2 (2018). <a href=\"https://doi.org/10.1002/adem.201800290\">https://doi.org/10.1002/adem.201800290</a>.","mla":"Klippstein, Sven Helge, et al. “Additive Manufacturing of Porous Structures for Unmanned Aerial Vehicles Applications.” <i>Advanced Engineering Materials</i>, vol. 20, no. 2, 1800290, 2018, doi:<a href=\"https://doi.org/10.1002/adem.201800290\">10.1002/adem.201800290</a>.","bibtex":"@article{Klippstein_Hassanin_Diaz De Cerio Sanchez_Zweiri_Seneviratne_2018, title={Additive Manufacturing of Porous Structures for Unmanned Aerial Vehicles Applications}, volume={20}, DOI={<a href=\"https://doi.org/10.1002/adem.201800290\">10.1002/adem.201800290</a>}, number={21800290}, journal={Advanced Engineering Materials}, author={Klippstein, Sven Helge and Hassanin, Hany and Diaz De Cerio Sanchez, Alejandro and Zweiri, Yahya and Seneviratne, Lakmal}, year={2018} }","ama":"Klippstein SH, Hassanin H, Diaz De Cerio Sanchez A, Zweiri Y, Seneviratne L. Additive Manufacturing of Porous Structures for Unmanned Aerial Vehicles Applications. <i>Advanced Engineering Materials</i>. 2018;20(2). doi:<a href=\"https://doi.org/10.1002/adem.201800290\">10.1002/adem.201800290</a>"}},{"citation":{"mla":"Klippstein, Sven Helge, et al. “Fused Deposition Modeling for Unmanned Aerial Vehicles (UAVs): A Review.” <i>Advanced Engineering Materials</i>, 1700552, 2017, doi:<a href=\"https://doi.org/10.1002/adem.201700552\">10.1002/adem.201700552</a>.","ama":"Klippstein SH, Diaz De Cerio Sanchez A, Hassanin H, Zweiri Y, Seneviratne L. Fused Deposition Modeling for Unmanned Aerial Vehicles (UAVs): A Review. <i>Advanced Engineering Materials</i>. Published online 2017. doi:<a href=\"https://doi.org/10.1002/adem.201700552\">10.1002/adem.201700552</a>","bibtex":"@article{Klippstein_Diaz De Cerio Sanchez_Hassanin_Zweiri_Seneviratne_2017, title={Fused Deposition Modeling for Unmanned Aerial Vehicles (UAVs): A Review}, DOI={<a href=\"https://doi.org/10.1002/adem.201700552\">10.1002/adem.201700552</a>}, number={1700552}, journal={Advanced Engineering Materials}, author={Klippstein, Sven Helge and Diaz De Cerio Sanchez, Alejandro and Hassanin, Hany and Zweiri, Yahya and Seneviratne, Lakmal}, year={2017} }","apa":"Klippstein, S. H., Diaz De Cerio Sanchez, A., Hassanin, H., Zweiri, Y., &#38; Seneviratne, L. (2017). Fused Deposition Modeling for Unmanned Aerial Vehicles (UAVs): A Review. <i>Advanced Engineering Materials</i>, Article 1700552. <a href=\"https://doi.org/10.1002/adem.201700552\">https://doi.org/10.1002/adem.201700552</a>","ieee":"S. H. Klippstein, A. Diaz De Cerio Sanchez, H. Hassanin, Y. Zweiri, and L. Seneviratne, “Fused Deposition Modeling for Unmanned Aerial Vehicles (UAVs): A Review,” <i>Advanced Engineering Materials</i>, Art. no. 1700552, 2017, doi: <a href=\"https://doi.org/10.1002/adem.201700552\">10.1002/adem.201700552</a>.","chicago":"Klippstein, Sven Helge, Alejandro Diaz De Cerio Sanchez, Hany Hassanin, Yahya Zweiri, and Lakmal Seneviratne. “Fused Deposition Modeling for Unmanned Aerial Vehicles (UAVs): A Review.” <i>Advanced Engineering Materials</i>, 2017. <a href=\"https://doi.org/10.1002/adem.201700552\">https://doi.org/10.1002/adem.201700552</a>.","short":"S.H. Klippstein, A. Diaz De Cerio Sanchez, H. Hassanin, Y. Zweiri, L. Seneviratne, Advanced Engineering Materials (2017)."},"publication":"Advanced Engineering Materials","extern":"1","quality_controlled":"1","abstract":[{"lang":"eng","text":"Additive Manufacturing (AM) is a game changing production technology for aerospace applications. Fused deposition modeling is one of the most widely used AM technologies and recently has gained much attention in the advancement of many products. This paper introduces an extensive review of fused deposition modeling and its application in the development of high performance unmanned aerial vehicles. The process methodology, materials, post processing, and properties of its products are discussed in details. Successful examples of using this technology for making functional, lightweight, and high endurance unmanned aerial vehicles are also highlighted. In addition, major opportunities, limitations, and outlook of fused deposition modeling are also explored. The paper shows that the emerge of fused deposition modeling as a robust technique for unmanned aerial vehicles represents a good opportunity to produce compact, strong, lightweight structures, and functional parts with embedded electronic."}],"date_created":"2020-03-06T12:00:07Z","type":"journal_article","keyword":["FDM","Review","UAV"],"author":[{"first_name":"Sven Helge","last_name":"Klippstein","full_name":"Klippstein, Sven Helge","id":"71545"},{"full_name":"Diaz De Cerio Sanchez, Alejandro","last_name":"Diaz De Cerio Sanchez","first_name":"Alejandro"},{"full_name":"Hassanin, Hany","last_name":"Hassanin","first_name":"Hany"},{"last_name":"Zweiri","first_name":"Yahya","full_name":"Zweiri, Yahya"},{"last_name":"Seneviratne","first_name":"Lakmal","full_name":"Seneviratne, Lakmal"}],"publication_identifier":{"issn":["1438-1656"]},"title":"Fused Deposition Modeling for Unmanned Aerial Vehicles (UAVs): A Review","status":"public","year":"2017","publication_status":"published","date_updated":"2022-01-06T06:52:47Z","language":[{"iso":"eng"}],"_id":"16252","article_number":"1700552","user_id":"71545","doi":"10.1002/adem.201700552"},{"date_created":"2021-01-13T10:12:46Z","type":"journal_article","department":[{"_id":"35"},{"_id":"302"},{"_id":"321"}],"publication":"ADVANCED ENGINEERING MATERIALS","issue":"8","abstract":[{"lang":"eng","text":"The influence of a chemical or mechanical surface modification followed by different post-heat treatments on the bond strength of galvanized steel/ aluminum composites is studied. An incremental rolling process is used for joint formation based on plastic deformation. The morphology, the chemical state of the modified surfaces as well as the cross-section, and local potential distribution of the welded zone is characterized by different microscopic and spectroscopic methods. The stability of the joint is analyzed by a shear-force test in combination with microscopic failure analysis. A clear correlation between pre/post-treatment and the joint strength is observed."}],"language":[{"iso":"eng"}],"doi":"10.1002/adem.201600085","year":"2016","title":"Influence of the Surface and Heat Treatment on the Bond Strength of Galvanized Steel/Aluminum Composites Joined by Plastic Deformation","publication_identifier":{"eissn":["1527-2648"],"issn":["1438-1656"]},"author":[{"first_name":"Christian","last_name":"Hoppe","full_name":"Hoppe, Christian","id":"27401"},{"id":"7266","full_name":"Ebbert, Christoph","first_name":"Christoph","last_name":"Ebbert"},{"full_name":"Grothe, Richard","last_name":"Grothe","first_name":"Richard"},{"full_name":"Schmidt, Hans Christian","last_name":"Schmidt","first_name":"Hans Christian"},{"last_name":"Hordych","first_name":"Illia","full_name":"Hordych, Illia"},{"full_name":"Homberg, Werner","first_name":"Werner","last_name":"Homberg"},{"full_name":"Maier, Hans Juergen","first_name":"Hans Juergen","last_name":"Maier"},{"id":"194","full_name":"Grundmeier, Guido","last_name":"Grundmeier","first_name":"Guido"}],"publication_status":"published","date_updated":"2022-01-06T06:54:41Z","intvolume":"        18","external_id":{"isi":["000382984300008"]},"isi":"1","citation":{"chicago":"Hoppe, Christian, Christoph Ebbert, Richard Grothe, Hans Christian Schmidt, Illia Hordych, Werner Homberg, Hans Juergen Maier, and Guido Grundmeier. “Influence of the Surface and Heat Treatment on the Bond Strength of Galvanized Steel/Aluminum Composites Joined by Plastic Deformation.” <i>ADVANCED ENGINEERING MATERIALS</i> 18, no. 8 (2016): 1371–80. <a href=\"https://doi.org/10.1002/adem.201600085\">https://doi.org/10.1002/adem.201600085</a>.","short":"C. Hoppe, C. Ebbert, R. Grothe, H.C. Schmidt, I. Hordych, W. Homberg, H.J. Maier, G. Grundmeier, ADVANCED ENGINEERING MATERIALS 18 (2016) 1371–1380.","apa":"Hoppe, C., Ebbert, C., Grothe, R., Schmidt, H. C., Hordych, I., Homberg, W., … Grundmeier, G. (2016). Influence of the Surface and Heat Treatment on the Bond Strength of Galvanized Steel/Aluminum Composites Joined by Plastic Deformation. <i>ADVANCED ENGINEERING MATERIALS</i>, <i>18</i>(8), 1371–1380. <a href=\"https://doi.org/10.1002/adem.201600085\">https://doi.org/10.1002/adem.201600085</a>","ieee":"C. Hoppe <i>et al.</i>, “Influence of the Surface and Heat Treatment on the Bond Strength of Galvanized Steel/Aluminum Composites Joined by Plastic Deformation,” <i>ADVANCED ENGINEERING MATERIALS</i>, vol. 18, no. 8, pp. 1371–1380, 2016.","ama":"Hoppe C, Ebbert C, Grothe R, et al. Influence of the Surface and Heat Treatment on the Bond Strength of Galvanized Steel/Aluminum Composites Joined by Plastic Deformation. <i>ADVANCED ENGINEERING MATERIALS</i>. 2016;18(8):1371-1380. doi:<a href=\"https://doi.org/10.1002/adem.201600085\">10.1002/adem.201600085</a>","bibtex":"@article{Hoppe_Ebbert_Grothe_Schmidt_Hordych_Homberg_Maier_Grundmeier_2016, title={Influence of the Surface and Heat Treatment on the Bond Strength of Galvanized Steel/Aluminum Composites Joined by Plastic Deformation}, volume={18}, DOI={<a href=\"https://doi.org/10.1002/adem.201600085\">10.1002/adem.201600085</a>}, number={8}, journal={ADVANCED ENGINEERING MATERIALS}, author={Hoppe, Christian and Ebbert, Christoph and Grothe, Richard and Schmidt, Hans Christian and Hordych, Illia and Homberg, Werner and Maier, Hans Juergen and Grundmeier, Guido}, year={2016}, pages={1371–1380} }","mla":"Hoppe, Christian, et al. “Influence of the Surface and Heat Treatment on the Bond Strength of Galvanized Steel/Aluminum Composites Joined by Plastic Deformation.” <i>ADVANCED ENGINEERING MATERIALS</i>, vol. 18, no. 8, 2016, pp. 1371–80, doi:<a href=\"https://doi.org/10.1002/adem.201600085\">10.1002/adem.201600085</a>."},"quality_controlled":"1","page":"1371-1380","_id":"20941","user_id":"7266","volume":18,"status":"public"},{"status":"public","page":"1066-1074","_id":"20942","user_id":"7266","volume":18,"citation":{"ama":"Hoppe C, Ebbert C, Voigt M, et al. Molecular Engineering of Aluminum-Copper Interfaces for Joining by Plastic Deformation. <i>ADVANCED ENGINEERING MATERIALS</i>. 2016;18(6):1066-1074. doi:<a href=\"https://doi.org/10.1002/adem.201500501\">10.1002/adem.201500501</a>","bibtex":"@article{Hoppe_Ebbert_Voigt_Schmidt_Rodman_Homberg_Maier_Grundmeier_2016, title={Molecular Engineering of Aluminum-Copper Interfaces for Joining by Plastic Deformation}, volume={18}, DOI={<a href=\"https://doi.org/10.1002/adem.201500501\">10.1002/adem.201500501</a>}, number={6}, journal={ADVANCED ENGINEERING MATERIALS}, author={Hoppe, Christian and Ebbert, Christoph and Voigt, Markus and Schmidt, Hans Christian and Rodman, Dmytro and Homberg, Werner and Maier, Hans Juergen and Grundmeier, Guido}, year={2016}, pages={1066–1074} }","mla":"Hoppe, Christian, et al. “Molecular Engineering of Aluminum-Copper Interfaces for Joining by Plastic Deformation.” <i>ADVANCED ENGINEERING MATERIALS</i>, vol. 18, no. 6, 2016, pp. 1066–74, doi:<a href=\"https://doi.org/10.1002/adem.201500501\">10.1002/adem.201500501</a>.","short":"C. Hoppe, C. Ebbert, M. Voigt, H.C. Schmidt, D. Rodman, W. Homberg, H.J. Maier, G. Grundmeier, ADVANCED ENGINEERING MATERIALS 18 (2016) 1066–1074.","chicago":"Hoppe, Christian, Christoph Ebbert, Markus Voigt, Hans Christian Schmidt, Dmytro Rodman, Werner Homberg, Hans Juergen Maier, and Guido Grundmeier. “Molecular Engineering of Aluminum-Copper Interfaces for Joining by Plastic Deformation.” <i>ADVANCED ENGINEERING MATERIALS</i> 18, no. 6 (2016): 1066–74. <a href=\"https://doi.org/10.1002/adem.201500501\">https://doi.org/10.1002/adem.201500501</a>.","apa":"Hoppe, C., Ebbert, C., Voigt, M., Schmidt, H. C., Rodman, D., Homberg, W., … Grundmeier, G. (2016). Molecular Engineering of Aluminum-Copper Interfaces for Joining by Plastic Deformation. <i>ADVANCED ENGINEERING MATERIALS</i>, <i>18</i>(6), 1066–1074. <a href=\"https://doi.org/10.1002/adem.201500501\">https://doi.org/10.1002/adem.201500501</a>","ieee":"C. Hoppe <i>et al.</i>, “Molecular Engineering of Aluminum-Copper Interfaces for Joining by Plastic Deformation,” <i>ADVANCED ENGINEERING MATERIALS</i>, vol. 18, no. 6, pp. 1066–1074, 2016."},"isi":"1","quality_controlled":"1","external_id":{"isi":["000378684200023"]},"year":"2016","title":"Molecular Engineering of Aluminum-Copper Interfaces for Joining by Plastic Deformation","publication_identifier":{"issn":["1438-1656"],"eissn":["1527-2648"]},"author":[{"id":"27401","full_name":"Hoppe, Christian","first_name":"Christian","last_name":"Hoppe"},{"full_name":"Ebbert, Christoph","last_name":"Ebbert","first_name":"Christoph","id":"7266"},{"full_name":"Voigt, Markus","first_name":"Markus","last_name":"Voigt"},{"first_name":"Hans Christian","last_name":"Schmidt","full_name":"Schmidt, Hans Christian"},{"full_name":"Rodman, Dmytro","last_name":"Rodman","first_name":"Dmytro"},{"full_name":"Homberg, Werner","last_name":"Homberg","first_name":"Werner"},{"last_name":"Maier","first_name":"Hans Juergen","full_name":"Maier, Hans Juergen"},{"id":"194","last_name":"Grundmeier","first_name":"Guido","full_name":"Grundmeier, Guido"}],"date_updated":"2022-01-06T06:54:41Z","publication_status":"published","intvolume":"        18","language":[{"iso":"eng"}],"doi":"10.1002/adem.201500501","publication":"ADVANCED ENGINEERING MATERIALS","issue":"6","abstract":[{"lang":"eng","text":"Interface modification based on ultra-thin mercapto-propyl(trimethoxy) silane (MPTMS) films is shown to promote joining of copper and aluminum by plastic deformation followed by a heat treatment. The surface morphology and the surface chemistry of the metal substrates were analyzed by means of FE-SEM, XPS, and FT-IRRAS. The spectroscopic data show that the MPTMS film is crosslinked via Si-O-Si bonds and that stable Cu-S and Si-O-Al interfacial bonds are formed. The shear-force tests of the joints led to force displacement curves that are characteristic for a covalently bonded interface. Complementary cross sectional SEM and EDS analysis of the joint proved that a defect-free interface was formed without any measureable interdiffusion of metals across the interface or cracking of an oxide films."}],"date_created":"2021-01-13T10:12:47Z","type":"journal_article","department":[{"_id":"35"},{"_id":"302"},{"_id":"321"}]},{"department":[{"_id":"9"},{"_id":"321"},{"_id":"149"}],"type":"journal_article","date_created":"2020-02-21T14:41:20Z","citation":{"apa":"Niendorf, T., Leuders, S., Riemer, A., Brenne, F., Tröster, T., Richard, H. A., &#38; Schwarze, D. (2014). Functionally Graded Alloys Obtained by Additive Manufacturing. <i>Advanced Engineering Materials</i>, 857–861. <a href=\"https://doi.org/10.1002/adem.201300579\">https://doi.org/10.1002/adem.201300579</a>","ieee":"T. Niendorf <i>et al.</i>, “Functionally Graded Alloys Obtained by Additive Manufacturing,” <i>Advanced Engineering Materials</i>, pp. 857–861, 2014.","chicago":"Niendorf, Thomas, Stefan Leuders, Andre Riemer, Florian Brenne, Thomas Tröster, Hans Albert Richard, and Dieter Schwarze. “Functionally Graded Alloys Obtained by Additive Manufacturing.” <i>Advanced Engineering Materials</i>, 2014, 857–61. <a href=\"https://doi.org/10.1002/adem.201300579\">https://doi.org/10.1002/adem.201300579</a>.","short":"T. Niendorf, S. Leuders, A. Riemer, F. Brenne, T. Tröster, H.A. Richard, D. Schwarze, Advanced Engineering Materials (2014) 857–861.","mla":"Niendorf, Thomas, et al. “Functionally Graded Alloys Obtained by Additive Manufacturing.” <i>Advanced Engineering Materials</i>, 2014, pp. 857–61, doi:<a href=\"https://doi.org/10.1002/adem.201300579\">10.1002/adem.201300579</a>.","ama":"Niendorf T, Leuders S, Riemer A, et al. Functionally Graded Alloys Obtained by Additive Manufacturing. <i>Advanced Engineering Materials</i>. 2014:857-861. doi:<a href=\"https://doi.org/10.1002/adem.201300579\">10.1002/adem.201300579</a>","bibtex":"@article{Niendorf_Leuders_Riemer_Brenne_Tröster_Richard_Schwarze_2014, title={Functionally Graded Alloys Obtained by Additive Manufacturing}, DOI={<a href=\"https://doi.org/10.1002/adem.201300579\">10.1002/adem.201300579</a>}, journal={Advanced Engineering Materials}, author={Niendorf, Thomas and Leuders, Stefan and Riemer, Andre and Brenne, Florian and Tröster, Thomas and Richard, Hans Albert and Schwarze, Dieter}, year={2014}, pages={857–861} }"},"publication":"Advanced Engineering Materials","doi":"10.1002/adem.201300579","user_id":"72008","_id":"15966","language":[{"iso":"eng"}],"page":"857-861","date_updated":"2022-01-06T06:52:41Z","publication_status":"published","publication_identifier":{"issn":["1438-1656"]},"author":[{"full_name":"Niendorf, Thomas","last_name":"Niendorf","first_name":"Thomas"},{"full_name":"Leuders, Stefan","first_name":"Stefan","last_name":"Leuders"},{"last_name":"Riemer","first_name":"Andre","full_name":"Riemer, Andre"},{"last_name":"Brenne","first_name":"Florian","full_name":"Brenne, Florian"},{"full_name":"Tröster, Thomas","last_name":"Tröster","first_name":"Thomas","id":"553"},{"first_name":"Hans Albert","last_name":"Richard","full_name":"Richard, Hans Albert"},{"full_name":"Schwarze, Dieter","first_name":"Dieter","last_name":"Schwarze"}],"year":"2014","title":"Functionally Graded Alloys Obtained by Additive Manufacturing","status":"public"},{"date_updated":"2023-01-24T08:20:08Z","publication_status":"published","publication_identifier":{"issn":["1438-1656"]},"author":[{"full_name":"König, Dennis","last_name":"König","first_name":"Dennis"},{"last_name":"Naujoks","first_name":"Dennis","full_name":"Naujoks, Dennis"},{"full_name":"de los Arcos de Pedro, Maria Teresa","first_name":"Maria Teresa","last_name":"de los Arcos de Pedro","id":"54556"},{"last_name":"Grosse-Kreul","first_name":"Simon","full_name":"Grosse-Kreul, Simon"},{"full_name":"Ludwig, Alfred","first_name":"Alfred","last_name":"Ludwig"}],"title":"X-Ray Photoelectron Spectroscopy Investigations of the Surface Reaction Layer and its Effects on the Transformation Properties of Nanoscale Ti51Ni38Cu11Shape Memory Thin Films","status":"public","year":"2014","doi":"10.1002/adem.201400317","user_id":"54556","_id":"22580","language":[{"iso":"eng"}],"page":"669-673","extern":"1","citation":{"apa":"König, D., Naujoks, D., de los Arcos de Pedro, M. T., Grosse-Kreul, S., &#38; Ludwig, A. (2014). X-Ray Photoelectron Spectroscopy Investigations of the Surface Reaction Layer and its Effects on the Transformation Properties of Nanoscale Ti51Ni38Cu11Shape Memory Thin Films. <i>Advanced Engineering Materials</i>, 669–673. <a href=\"https://doi.org/10.1002/adem.201400317\">https://doi.org/10.1002/adem.201400317</a>","ieee":"D. König, D. Naujoks, M. T. de los Arcos de Pedro, S. Grosse-Kreul, and A. Ludwig, “X-Ray Photoelectron Spectroscopy Investigations of the Surface Reaction Layer and its Effects on the Transformation Properties of Nanoscale Ti51Ni38Cu11Shape Memory Thin Films,” <i>Advanced Engineering Materials</i>, pp. 669–673, 2014, doi: <a href=\"https://doi.org/10.1002/adem.201400317\">10.1002/adem.201400317</a>.","chicago":"König, Dennis, Dennis Naujoks, Maria Teresa de los Arcos de Pedro, Simon Grosse-Kreul, and Alfred Ludwig. “X-Ray Photoelectron Spectroscopy Investigations of the Surface Reaction Layer and Its Effects on the Transformation Properties of Nanoscale Ti51Ni38Cu11Shape Memory Thin Films.” <i>Advanced Engineering Materials</i>, 2014, 669–73. <a href=\"https://doi.org/10.1002/adem.201400317\">https://doi.org/10.1002/adem.201400317</a>.","short":"D. König, D. Naujoks, M.T. de los Arcos de Pedro, S. Grosse-Kreul, A. Ludwig, Advanced Engineering Materials (2014) 669–673.","mla":"König, Dennis, et al. “X-Ray Photoelectron Spectroscopy Investigations of the Surface Reaction Layer and Its Effects on the Transformation Properties of Nanoscale Ti51Ni38Cu11Shape Memory Thin Films.” <i>Advanced Engineering Materials</i>, 2014, pp. 669–73, doi:<a href=\"https://doi.org/10.1002/adem.201400317\">10.1002/adem.201400317</a>.","ama":"König D, Naujoks D, de los Arcos de Pedro MT, Grosse-Kreul S, Ludwig A. X-Ray Photoelectron Spectroscopy Investigations of the Surface Reaction Layer and its Effects on the Transformation Properties of Nanoscale Ti51Ni38Cu11Shape Memory Thin Films. <i>Advanced Engineering Materials</i>. Published online 2014:669-673. doi:<a href=\"https://doi.org/10.1002/adem.201400317\">10.1002/adem.201400317</a>","bibtex":"@article{König_Naujoks_de los Arcos de Pedro_Grosse-Kreul_Ludwig_2014, title={X-Ray Photoelectron Spectroscopy Investigations of the Surface Reaction Layer and its Effects on the Transformation Properties of Nanoscale Ti51Ni38Cu11Shape Memory Thin Films}, DOI={<a href=\"https://doi.org/10.1002/adem.201400317\">10.1002/adem.201400317</a>}, journal={Advanced Engineering Materials}, author={König, Dennis and Naujoks, Dennis and de los Arcos de Pedro, Maria Teresa and Grosse-Kreul, Simon and Ludwig, Alfred}, year={2014}, pages={669–673} }"},"publication":"Advanced Engineering Materials","department":[{"_id":"302"}],"type":"journal_article","date_created":"2021-07-07T09:14:25Z"}]