--- _id: '64985' abstract: - lang: eng text: Modern industrial development has necessitated a wide range of joining technologies. Self-pierce riveting has become a prevalent technique for sheet metal assembly, especially in automotive applications. Achieving proper joint geometry and adequate load-bearing capacity depends on appropriate tool selection and precise process control. Material properties and condition also play a significant role in process performance. To accommodate the inevitable variations in component characteristics during production, a robust and stable joining process is essential. The study focuses on investigating the influence of preformed joining partners on the joining process and the joint's load capacity. An EN AW-6014 in T4 condition, as well as an HCT590X, are used as materials for this study. For this purpose, an exemplary process chain consisting of the steps of performing, joining, and shear load testing is studied. Each process step is implemented using an FE model to predict the outcome of subsequent steps. For analysis of the influence of pre-strain, an optimisation software is used to plan and execute variations of the process. These variations are used to create a meta-model that can describe the relationships between pre-forming and characteristic parameters of subsequent process steps. The resulting model is validated by comparing simulation and experimental data. Finally, in a novel approach, the robustness of the presented process chain is analyzed in terms of a tolerable performance level for the joining partners. article_number: '100391' author: - first_name: Jean-Patrick full_name: Ludwig, Jean-Patrick id: '76631' last_name: Ludwig - first_name: Emil full_name: Tolke, Emil last_name: Tolke - first_name: Malte Christian full_name: Schlichter, Malte Christian id: '61977' last_name: Schlichter - first_name: Mathias full_name: Bobbert, Mathias id: '7850' last_name: Bobbert - first_name: Gerson full_name: Meschut, Gerson id: '32056' last_name: Meschut orcid: 0000-0002-2763-1246 citation: ama: Ludwig J-P, Tolke E, Schlichter MC, Bobbert M, Meschut G. Numerical analysis of the robustness of self-pierce riveting with pre-formed joining partners. Journal of Advanced Joining Processes. 2026;13. doi:10.1016/j.jajp.2026.100391 apa: Ludwig, J.-P., Tolke, E., Schlichter, M. C., Bobbert, M., & Meschut, G. (2026). Numerical analysis of the robustness of self-pierce riveting with pre-formed joining partners. Journal of Advanced Joining Processes, 13, Article 100391. https://doi.org/10.1016/j.jajp.2026.100391 bibtex: '@article{Ludwig_Tolke_Schlichter_Bobbert_Meschut_2026, title={Numerical analysis of the robustness of self-pierce riveting with pre-formed joining partners}, volume={13}, DOI={10.1016/j.jajp.2026.100391}, number={100391}, journal={Journal of Advanced Joining Processes}, publisher={Elsevier BV}, author={Ludwig, Jean-Patrick and Tolke, Emil and Schlichter, Malte Christian and Bobbert, Mathias and Meschut, Gerson}, year={2026} }' chicago: Ludwig, Jean-Patrick, Emil Tolke, Malte Christian Schlichter, Mathias Bobbert, and Gerson Meschut. “Numerical Analysis of the Robustness of Self-Pierce Riveting with Pre-Formed Joining Partners.” Journal of Advanced Joining Processes 13 (2026). https://doi.org/10.1016/j.jajp.2026.100391. ieee: 'J.-P. Ludwig, E. Tolke, M. C. Schlichter, M. Bobbert, and G. Meschut, “Numerical analysis of the robustness of self-pierce riveting with pre-formed joining partners,” Journal of Advanced Joining Processes, vol. 13, Art. no. 100391, 2026, doi: 10.1016/j.jajp.2026.100391.' mla: Ludwig, Jean-Patrick, et al. “Numerical Analysis of the Robustness of Self-Pierce Riveting with Pre-Formed Joining Partners.” Journal of Advanced Joining Processes, vol. 13, 100391, Elsevier BV, 2026, doi:10.1016/j.jajp.2026.100391. short: J.-P. Ludwig, E. Tolke, M.C. Schlichter, M. Bobbert, G. Meschut, Journal of Advanced Joining Processes 13 (2026). date_created: 2026-03-16T12:30:39Z date_updated: 2026-03-16T12:38:13Z department: - _id: '9' doi: 10.1016/j.jajp.2026.100391 intvolume: ' 13' keyword: - Self-pierce riveting - FE modelling - Plastic pre-deformation - Meta modelling language: - iso: eng project: - _id: '131' name: TRR 285 - Project Area A - _id: '135' name: TRR 285 - Subproject A01 - _id: '130' name: 'TRR 285: Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen Prozessketten' publication: Journal of Advanced Joining Processes publication_identifier: issn: - 2666-3309 publication_status: published publisher: Elsevier BV quality_controlled: '1' status: public title: Numerical analysis of the robustness of self-pierce riveting with pre-formed joining partners type: journal_article user_id: '76631' volume: 13 year: '2026' ... --- _id: '65488' article_number: '100402' author: - first_name: Julia full_name: Mergheim, Julia last_name: Mergheim - first_name: Thomas full_name: Wallmersperger, Thomas last_name: Wallmersperger - first_name: Eugen full_name: Wolf, Eugen last_name: Wolf - first_name: Malte full_name: Schlichter, Malte last_name: Schlichter - first_name: Jean-Patrick full_name: Ludwig, Jean-Patrick last_name: Ludwig - first_name: Johannes full_name: Friedlein, Johannes last_name: Friedlein - first_name: Johannes full_name: Gerritzen, Johannes last_name: Gerritzen - first_name: Deekshith Reddy full_name: Devulapally, Deekshith Reddy id: '76837' last_name: Devulapally - first_name: Chin full_name: Chen, Chin last_name: Chen - first_name: Deborah full_name: Weiss, Deborah last_name: Weiss - first_name: Sven full_name: Krome, Sven last_name: Krome - first_name: Gregor full_name: Reschke, Gregor last_name: Reschke - first_name: Maik full_name: Gude, Maik last_name: Gude citation: ama: 'Mergheim J, Wallmersperger T, Wolf E, et al. Simulation-based process chain for aluminum clinched joints: Predicting geometry, strength, and failure behavior. Journal of Advanced Joining Processes. Published online 2026. doi:10.1016/j.jajp.2026.100402' apa: 'Mergheim, J., Wallmersperger, T., Wolf, E., Schlichter, M., Ludwig, J.-P., Friedlein, J., Gerritzen, J., Devulapally, D. R., Chen, C., Weiss, D., Krome, S., Reschke, G., & Gude, M. (2026). Simulation-based process chain for aluminum clinched joints: Predicting geometry, strength, and failure behavior. Journal of Advanced Joining Processes, Article 100402. https://doi.org/10.1016/j.jajp.2026.100402' bibtex: '@article{Mergheim_Wallmersperger_Wolf_Schlichter_Ludwig_Friedlein_Gerritzen_Devulapally_Chen_Weiss_et al._2026, title={Simulation-based process chain for aluminum clinched joints: Predicting geometry, strength, and failure behavior}, DOI={10.1016/j.jajp.2026.100402}, number={100402}, journal={Journal of Advanced Joining Processes}, publisher={Elsevier BV}, author={Mergheim, Julia and Wallmersperger, Thomas and Wolf, Eugen and Schlichter, Malte and Ludwig, Jean-Patrick and Friedlein, Johannes and Gerritzen, Johannes and Devulapally, Deekshith Reddy and Chen, Chin and Weiss, Deborah and et al.}, year={2026} }' chicago: 'Mergheim, Julia, Thomas Wallmersperger, Eugen Wolf, Malte Schlichter, Jean-Patrick Ludwig, Johannes Friedlein, Johannes Gerritzen, et al. “Simulation-Based Process Chain for Aluminum Clinched Joints: Predicting Geometry, Strength, and Failure Behavior.” Journal of Advanced Joining Processes, 2026. https://doi.org/10.1016/j.jajp.2026.100402.' ieee: 'J. Mergheim et al., “Simulation-based process chain for aluminum clinched joints: Predicting geometry, strength, and failure behavior,” Journal of Advanced Joining Processes, Art. no. 100402, 2026, doi: 10.1016/j.jajp.2026.100402.' mla: 'Mergheim, Julia, et al. “Simulation-Based Process Chain for Aluminum Clinched Joints: Predicting Geometry, Strength, and Failure Behavior.” Journal of Advanced Joining Processes, 100402, Elsevier BV, 2026, doi:10.1016/j.jajp.2026.100402.' short: J. Mergheim, T. Wallmersperger, E. Wolf, M. Schlichter, J.-P. Ludwig, J. Friedlein, J. Gerritzen, D.R. Devulapally, C. Chen, D. Weiss, S. Krome, G. Reschke, M. Gude, Journal of Advanced Joining Processes (2026). date_created: 2026-04-22T10:23:12Z date_updated: 2026-04-22T10:26:11Z department: - _id: '149' - _id: '321' - _id: '9' doi: 10.1016/j.jajp.2026.100402 language: - iso: eng project: - _id: '130' name: 'TRR 285: Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen Prozessketten' - _id: '140' name: TRR 285 - Subproject B01 publication: Journal of Advanced Joining Processes publication_identifier: issn: - 2666-3309 publication_status: published publisher: Elsevier BV status: public title: 'Simulation-based process chain for aluminum clinched joints: Predicting geometry, strength, and failure behavior' type: journal_article user_id: '76837' year: '2026' ... --- _id: '59584' article_number: '100299' author: - first_name: Johannes full_name: Friedlein, Johannes last_name: Friedlein - first_name: Stephan full_name: Lüder, Stephan last_name: Lüder - first_name: Jan full_name: Kalich, Jan last_name: Kalich - first_name: Hans Christian full_name: Schmale, Hans Christian last_name: Schmale - first_name: Max full_name: Böhnke, Max id: '45779' last_name: Böhnke - first_name: Malte Christian full_name: Schlichter, Malte Christian id: '61977' last_name: Schlichter - first_name: Mathias full_name: Bobbert, Mathias id: '7850' last_name: Bobbert - first_name: Gerson full_name: Meschut, Gerson id: '32056' last_name: Meschut orcid: 0000-0002-2763-1246 - first_name: Paul full_name: Steinmann, Paul last_name: Steinmann - first_name: Julia full_name: Mergheim, Julia last_name: Mergheim citation: ama: Friedlein J, Lüder S, Kalich J, et al. Application of stress-state-dependent ductile damage and failure model to clinch joining for a wide range of tool and material combinations. Journal of Advanced Joining Processes. 2025;11. doi:10.1016/j.jajp.2025.100299 apa: Friedlein, J., Lüder, S., Kalich, J., Schmale, H. C., Böhnke, M., Schlichter, M. C., Bobbert, M., Meschut, G., Steinmann, P., & Mergheim, J. (2025). Application of stress-state-dependent ductile damage and failure model to clinch joining for a wide range of tool and material combinations. Journal of Advanced Joining Processes, 11, Article 100299. https://doi.org/10.1016/j.jajp.2025.100299 bibtex: '@article{Friedlein_Lüder_Kalich_Schmale_Böhnke_Schlichter_Bobbert_Meschut_Steinmann_Mergheim_2025, title={Application of stress-state-dependent ductile damage and failure model to clinch joining for a wide range of tool and material combinations}, volume={11}, DOI={10.1016/j.jajp.2025.100299}, number={100299}, journal={Journal of Advanced Joining Processes}, publisher={Elsevier BV}, author={Friedlein, Johannes and Lüder, Stephan and Kalich, Jan and Schmale, Hans Christian and Böhnke, Max and Schlichter, Malte Christian and Bobbert, Mathias and Meschut, Gerson and Steinmann, Paul and Mergheim, Julia}, year={2025} }' chicago: Friedlein, Johannes, Stephan Lüder, Jan Kalich, Hans Christian Schmale, Max Böhnke, Malte Christian Schlichter, Mathias Bobbert, Gerson Meschut, Paul Steinmann, and Julia Mergheim. “Application of Stress-State-Dependent Ductile Damage and Failure Model to Clinch Joining for a Wide Range of Tool and Material Combinations.” Journal of Advanced Joining Processes 11 (2025). https://doi.org/10.1016/j.jajp.2025.100299. ieee: 'J. Friedlein et al., “Application of stress-state-dependent ductile damage and failure model to clinch joining for a wide range of tool and material combinations,” Journal of Advanced Joining Processes, vol. 11, Art. no. 100299, 2025, doi: 10.1016/j.jajp.2025.100299.' mla: Friedlein, Johannes, et al. “Application of Stress-State-Dependent Ductile Damage and Failure Model to Clinch Joining for a Wide Range of Tool and Material Combinations.” Journal of Advanced Joining Processes, vol. 11, 100299, Elsevier BV, 2025, doi:10.1016/j.jajp.2025.100299. short: J. Friedlein, S. Lüder, J. Kalich, H.C. Schmale, M. Böhnke, M.C. Schlichter, M. Bobbert, G. Meschut, P. Steinmann, J. Mergheim, Journal of Advanced Joining Processes 11 (2025). date_created: 2025-04-15T11:00:56Z date_updated: 2026-02-24T14:00:55Z doi: 10.1016/j.jajp.2025.100299 intvolume: ' 11' language: - iso: eng project: - _id: '131' name: 'TRR 285 - A: TRR 285 - Project Area A' - _id: '135' name: 'TRR 285 – A01: TRR 285 - Subproject A01' - _id: '138' name: 'TRR 285 – A04: TRR 285 - Subproject A04' - _id: '139' name: 'TRR 285 – A05: TRR 285 - Subproject A05' - _id: '130' name: 'TRR 285: Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen Prozessketten' publication: Journal of Advanced Joining Processes publication_identifier: issn: - 2666-3309 publication_status: published publisher: Elsevier BV quality_controlled: '1' status: public title: Application of stress-state-dependent ductile damage and failure model to clinch joining for a wide range of tool and material combinations type: journal_article user_id: '7850' volume: 11 year: '2025' ... --- _id: '63828' article_number: '100368' author: - first_name: Johannes full_name: Gerritzen, Johannes id: '105344' last_name: Gerritzen orcid: 0000-0002-0169-8602 - first_name: Kunal full_name: Chopra, Kunal last_name: Chopra - first_name: Gregor full_name: Reschke, Gregor id: '98812' last_name: Reschke - first_name: Andreas full_name: Hornig, Andreas last_name: Hornig - first_name: Alexander full_name: Brosius, Alexander last_name: Brosius - first_name: Maik full_name: Gude, Maik last_name: Gude citation: ama: Gerritzen J, Chopra K, Reschke G, Hornig A, Brosius A, Gude M. Quality assurance of clinched joints using explainable machine learning. Journal of Advanced Joining Processes. 2025;13. doi:10.1016/j.jajp.2025.100368 apa: Gerritzen, J., Chopra, K., Reschke, G., Hornig, A., Brosius, A., & Gude, M. (2025). Quality assurance of clinched joints using explainable machine learning. Journal of Advanced Joining Processes, 13, Article 100368. https://doi.org/10.1016/j.jajp.2025.100368 bibtex: '@article{Gerritzen_Chopra_Reschke_Hornig_Brosius_Gude_2025, title={Quality assurance of clinched joints using explainable machine learning}, volume={13}, DOI={10.1016/j.jajp.2025.100368}, number={100368}, journal={Journal of Advanced Joining Processes}, publisher={Elsevier BV}, author={Gerritzen, Johannes and Chopra, Kunal and Reschke, Gregor and Hornig, Andreas and Brosius, Alexander and Gude, Maik}, year={2025} }' chicago: Gerritzen, Johannes, Kunal Chopra, Gregor Reschke, Andreas Hornig, Alexander Brosius, and Maik Gude. “Quality Assurance of Clinched Joints Using Explainable Machine Learning.” Journal of Advanced Joining Processes 13 (2025). https://doi.org/10.1016/j.jajp.2025.100368. ieee: 'J. Gerritzen, K. Chopra, G. Reschke, A. Hornig, A. Brosius, and M. Gude, “Quality assurance of clinched joints using explainable machine learning,” Journal of Advanced Joining Processes, vol. 13, Art. no. 100368, 2025, doi: 10.1016/j.jajp.2025.100368.' mla: Gerritzen, Johannes, et al. “Quality Assurance of Clinched Joints Using Explainable Machine Learning.” Journal of Advanced Joining Processes, vol. 13, 100368, Elsevier BV, 2025, doi:10.1016/j.jajp.2025.100368. short: J. Gerritzen, K. Chopra, G. Reschke, A. Hornig, A. Brosius, M. Gude, Journal of Advanced Joining Processes 13 (2025). date_created: 2026-02-02T08:32:04Z date_updated: 2026-02-27T06:45:47Z doi: 10.1016/j.jajp.2025.100368 intvolume: ' 13' language: - iso: eng project: - _id: '137' name: TRR 285 - Subproject A03 - _id: '131' name: TRR 285 - Project Area A - _id: '130' name: 'TRR 285: Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen Prozessketten' - _id: '133' name: TRR 285 - Project Area C - _id: '148' name: TRR 285 - Subproject C04 publication: Journal of Advanced Joining Processes publication_identifier: issn: - 2666-3309 publication_status: published publisher: Elsevier BV status: public title: Quality assurance of clinched joints using explainable machine learning type: journal_article user_id: '105344' volume: 13 year: '2025' ... --- _id: '60837' abstract: - lang: eng text: "In light of growing demands for resource efficiency and sustainability in vehicle engineering, the environmentally compatible separation of structural adhesive joints is gaining increasing relevance. This study presents a comparative analysis of two physically based debonding methods: the established hot-air process and a cryogenic cold process based on liquid nitrogen (LN2). The primary objective is to assess the ecological impact and process-related sustainability of both approaches.\r\nExperimental investigations were conducted on a component-representative triple-sheet structure that simulates common automotive flange joints. Thermal input was applied either by convective heating using a hot air gun or by direct cooling through a contact-based LN2 tool. The resulting temperature profiles were recorded using spatially distributed thermocouples. Subsequently, the outer panel was selectively debonded to replicate a repair scenario, and the mechanical integrity of the remaining adhesive joint was evaluated through Mode I testing of L-shaped specimens. Process data served as input for an Life Cycle Assessment (LCA) according to DIN EN ISO 14040.\r\nThe cryogenic method achieved a 40% reduction in carbon footprint compared to the hot-air process (0.337 kg vs. 0.559 kg CO2-equivalents), primarily due to its shorter process time and more efficient heat transfer. While the hot-air method’s impact is mainly driven by electrical energy use, that of the cold method stems from cryogenic media consumption. Notwithstanding certain disadvantages in specific impact categories, the LN2-based process exhibits a superior overall ecological performance and signifies a promising solution for repair- and recycling-oriented adhesive separation in structural vehicle applications." article_number: '100332' article_type: original author: - first_name: Alex full_name: Jordan, Alex id: '62451' last_name: Jordan orcid: 0009-0007-9546-6071 - first_name: Lucas full_name: Hermelingmeier, Lucas id: '58649' last_name: Hermelingmeier - first_name: Julian full_name: Gilich, Julian id: '44391' last_name: Gilich - first_name: Gerson full_name: Meschut, Gerson id: '32056' last_name: Meschut orcid: 0000-0002-2763-1246 - first_name: Marco Sebastian full_name: De Santis, Marco Sebastian id: '52239' last_name: De Santis - first_name: Alexander full_name: Schlüter, Alexander id: '103302' last_name: Schlüter orcid: 0000-0002-2569-1624 citation: ama: Jordan A, Hermelingmeier L, Gilich J, Meschut G, De Santis MS, Schlüter A. Comparison of the economic efficiency and sustainability of two debonding processes for structurally bonded sills. Journal of Advanced Joining Processes. 2025;12. doi:10.1016/j.jajp.2025.100332 apa: Jordan, A., Hermelingmeier, L., Gilich, J., Meschut, G., De Santis, M. S., & Schlüter, A. (2025). Comparison of the economic efficiency and sustainability of two debonding processes for structurally bonded sills. Journal of Advanced Joining Processes, 12, Article 100332. https://doi.org/10.1016/j.jajp.2025.100332 bibtex: '@article{Jordan_Hermelingmeier_Gilich_Meschut_De Santis_Schlüter_2025, title={Comparison of the economic efficiency and sustainability of two debonding processes for structurally bonded sills}, volume={12}, DOI={10.1016/j.jajp.2025.100332}, number={100332}, journal={Journal of Advanced Joining Processes}, publisher={Elsevier}, author={Jordan, Alex and Hermelingmeier, Lucas and Gilich, Julian and Meschut, Gerson and De Santis, Marco Sebastian and Schlüter, Alexander}, year={2025} }' chicago: Jordan, Alex, Lucas Hermelingmeier, Julian Gilich, Gerson Meschut, Marco Sebastian De Santis, and Alexander Schlüter. “Comparison of the Economic Efficiency and Sustainability of Two Debonding Processes for Structurally Bonded Sills.” Journal of Advanced Joining Processes 12 (2025). https://doi.org/10.1016/j.jajp.2025.100332. ieee: 'A. Jordan, L. Hermelingmeier, J. Gilich, G. Meschut, M. S. De Santis, and A. Schlüter, “Comparison of the economic efficiency and sustainability of two debonding processes for structurally bonded sills,” Journal of Advanced Joining Processes, vol. 12, Art. no. 100332, 2025, doi: 10.1016/j.jajp.2025.100332.' mla: Jordan, Alex, et al. “Comparison of the Economic Efficiency and Sustainability of Two Debonding Processes for Structurally Bonded Sills.” Journal of Advanced Joining Processes, vol. 12, 100332, Elsevier, 2025, doi:10.1016/j.jajp.2025.100332. short: A. Jordan, L. Hermelingmeier, J. Gilich, G. Meschut, M.S. De Santis, A. Schlüter, Journal of Advanced Joining Processes 12 (2025). date_created: 2025-07-30T11:04:28Z date_updated: 2026-01-06T08:22:54Z department: - _id: '157' - _id: '876' - _id: '321' - _id: '9' doi: 10.1016/j.jajp.2025.100332 intvolume: ' 12' keyword: - Sustainable debonding - Structural adhesives - Sustainable joining technologies - Life Cycle Assessment (LCA) - Automotive repair process - Economically efficient debonding language: - iso: eng main_file_link: - open_access: '1' url: https://www.sciencedirect.com/science/article/pii/S2666330925000536?via%3Dihub oa: '1' publication: Journal of Advanced Joining Processes publication_identifier: issn: - 2666-3309 publication_status: published publisher: Elsevier quality_controlled: '1' status: public title: Comparison of the economic efficiency and sustainability of two debonding processes for structurally bonded sills type: journal_article user_id: '103302' volume: 12 year: '2025' ... --- _id: '56677' abstract: - lang: eng text: The rapid advancement in the electrification of modern vehicles has led to a continuous increase in electrical consumers for various comfort and safety functions. Ground studs serve as the electrical interface between the conductive vehicle body and the onboard network. Drawn arc stud welding is an economical and established joining process for producing ground stud joints. The circuits in the onboard network are increasingly subject to greater demands regarding current-carrying capacity and long-term stability. Reliable signal and power transmission require minimal contact resistance at the electrical connection points of the ground stud system and must withstand various operating and environmental conditions over the entire service life. In this study, a ground stud made of AlMg5, with a ZnNi-coated steel cap nut was used on a 2.0 mm thick sheet of AlMg3. The electrical connection of the ground studs was made using tinned copper cable lugs and 35 mm² cables. To analyze the electrical resistance behavior in an accelerated test, the ground studs were subjected to a superimposed load with a cyclic current profile for 1008 hours under changing climatic conditions. The results show that under the chosen operational and environmental conditions, accelerated aging and intermittent resistance behavior occur. A characteristic drop in resistance during the test indicates the failure point of the electrical connection. The cause of failure can be attributed to media penetration into the electrical contact zone. A failure of the electrical connection was observed after 512 hours. article_number: '100262' article_type: original author: - first_name: Viktor full_name: Haak, Viktor id: '60398' last_name: Haak - first_name: Keke full_name: Yang, Keke id: '65085' last_name: Yang orcid: 0000-0001-9201-9304 - first_name: Gerson full_name: Meschut, Gerson id: '32056' last_name: Meschut orcid: 0000-0002-2763-1246 citation: ama: Haak V, Yang K, Meschut G. Investigation of the electrical quality and long-term stability of aluminum ground stud connections in automotive applications. Journal of Advanced Joining Processes. 2024;10. doi:10.1016/j.jajp.2024.100262 apa: Haak, V., Yang, K., & Meschut, G. (2024). Investigation of the electrical quality and long-term stability of aluminum ground stud connections in automotive applications. Journal of Advanced Joining Processes, 10, Article 100262. https://doi.org/10.1016/j.jajp.2024.100262 bibtex: '@article{Haak_Yang_Meschut_2024, title={Investigation of the electrical quality and long-term stability of aluminum ground stud connections in automotive applications}, volume={10}, DOI={10.1016/j.jajp.2024.100262}, number={100262}, journal={Journal of Advanced Joining Processes}, publisher={Elsevier BV}, author={Haak, Viktor and Yang, Keke and Meschut, Gerson}, year={2024} }' chicago: Haak, Viktor, Keke Yang, and Gerson Meschut. “Investigation of the Electrical Quality and Long-Term Stability of Aluminum Ground Stud Connections in Automotive Applications.” Journal of Advanced Joining Processes 10 (2024). https://doi.org/10.1016/j.jajp.2024.100262. ieee: 'V. Haak, K. Yang, and G. Meschut, “Investigation of the electrical quality and long-term stability of aluminum ground stud connections in automotive applications,” Journal of Advanced Joining Processes, vol. 10, Art. no. 100262, 2024, doi: 10.1016/j.jajp.2024.100262.' mla: Haak, Viktor, et al. “Investigation of the Electrical Quality and Long-Term Stability of Aluminum Ground Stud Connections in Automotive Applications.” Journal of Advanced Joining Processes, vol. 10, 100262, Elsevier BV, 2024, doi:10.1016/j.jajp.2024.100262. short: V. Haak, K. Yang, G. Meschut, Journal of Advanced Joining Processes 10 (2024). date_created: 2024-10-18T06:54:39Z date_updated: 2025-02-24T07:30:44Z ddc: - '670' department: - _id: '157' doi: 10.1016/j.jajp.2024.100262 file: - access_level: closed content_type: application/pdf creator: kekeyang date_created: 2024-10-20T04:32:18Z date_updated: 2024-10-20T04:32:18Z file_id: '56688' file_name: 1-s2.0-S2666330924000785-main.pdf file_size: 27976520 relation: main_file success: 1 file_date_updated: 2024-10-20T04:32:18Z has_accepted_license: '1' intvolume: ' 10' keyword: - Stud welding - aluminum grounding connection - electrical resistance - superimposed load language: - iso: eng main_file_link: - open_access: '1' oa: '1' publication: Journal of Advanced Joining Processes publication_identifier: issn: - 2666-3309 publication_status: published publisher: Elsevier BV quality_controlled: '1' status: public title: Investigation of the electrical quality and long-term stability of aluminum ground stud connections in automotive applications type: journal_article user_id: '65085' volume: 10 year: '2024' ... --- _id: '60300' abstract: - lang: eng text: This study focuses on the phenomenological change in material strength caused by a specific heat treatment and the subsequent analysis of the influence on the clinching process and the resulting joint properties. For this purpose, three series of tests were performed. In the first series of tests, the influence of heat treatment up to 340 °C on the mechanical properties of an age-hardenable AlMgSi alloy was investigated. Holding time and temperature were varied and the material strength was evaluated by tensile and hardness tests. Two strength-increasing and two strength-reducing heat treatment parameters were identified. In the second series of tests, selected heat treatment parameters were applied to a larger number of specimens and the joint strength was investigated by shear and head tensile tests. In the shear tensile test, mainly the properties of the punch-side material have an influence on the resulting joint strength. A change in strength of the die-side material can be neglected. In contrast, the properties of both sheets are important in the head tensile test. The strength of the joint will only increase if the strength of both sheets is increased. In general, a strength increasing heat treatment resulted in higher joint strength. In the third series of tests, the factor of punch displacement was considered, which was demonstrated to directly influence the formation of the clinched joint geometry. article_number: '100263' author: - first_name: Christian full_name: Steinfelder, Christian last_name: Steinfelder - first_name: Dennis full_name: Rempel, Dennis last_name: Rempel - first_name: Alexander full_name: Brosius, Alexander last_name: Brosius citation: ama: Steinfelder C, Rempel D, Brosius A. Influence of the material properties on the clinching process and the resulting load-bearing capacity of the joint. Journal of Advanced Joining Processes. 2024;10. doi:10.1016/j.jajp.2024.100263 apa: Steinfelder, C., Rempel, D., & Brosius, A. (2024). Influence of the material properties on the clinching process and the resulting load-bearing capacity of the joint. Journal of Advanced Joining Processes, 10, Article 100263. https://doi.org/10.1016/j.jajp.2024.100263 bibtex: '@article{Steinfelder_Rempel_Brosius_2024, title={Influence of the material properties on the clinching process and the resulting load-bearing capacity of the joint}, volume={10}, DOI={10.1016/j.jajp.2024.100263}, number={100263}, journal={Journal of Advanced Joining Processes}, publisher={Elsevier BV}, author={Steinfelder, Christian and Rempel, Dennis and Brosius, Alexander}, year={2024} }' chicago: Steinfelder, Christian, Dennis Rempel, and Alexander Brosius. “Influence of the Material Properties on the Clinching Process and the Resulting Load-Bearing Capacity of the Joint.” Journal of Advanced Joining Processes 10 (2024). https://doi.org/10.1016/j.jajp.2024.100263. ieee: 'C. Steinfelder, D. Rempel, and A. Brosius, “Influence of the material properties on the clinching process and the resulting load-bearing capacity of the joint,” Journal of Advanced Joining Processes, vol. 10, Art. no. 100263, 2024, doi: 10.1016/j.jajp.2024.100263.' mla: Steinfelder, Christian, et al. “Influence of the Material Properties on the Clinching Process and the Resulting Load-Bearing Capacity of the Joint.” Journal of Advanced Joining Processes, vol. 10, 100263, Elsevier BV, 2024, doi:10.1016/j.jajp.2024.100263. short: C. Steinfelder, D. Rempel, A. Brosius, Journal of Advanced Joining Processes 10 (2024). date_created: 2025-06-23T07:54:23Z date_updated: 2025-06-23T07:57:53Z department: - _id: '630' doi: 10.1016/j.jajp.2024.100263 intvolume: ' 10' keyword: - Joining by forming - Clinching - EN AW-6014 - Heat treatment - Load-bearing capacity language: - iso: eng project: - _id: '130' grant_number: '418701707' name: 'TRR 285: TRR 285: Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen Prozessketten' - _id: '132' name: 'TRR 285 - B: TRR 285 - Project Area B' - _id: '140' name: 'TRR 285 – B01: TRR 285 - Subproject B01' publication: Journal of Advanced Joining Processes publication_identifier: issn: - 2666-3309 publication_status: published publisher: Elsevier BV status: public title: Influence of the material properties on the clinching process and the resulting load-bearing capacity of the joint type: journal_article user_id: '104464' volume: 10 year: '2024' ... --- _id: '54649' article_number: '100185' author: - first_name: Thomas full_name: Borgert, Thomas id: '83141' last_name: Borgert - first_name: Ansgar Bernhard full_name: Nordieker, Ansgar Bernhard id: '88725' last_name: Nordieker - first_name: Eugen full_name: Wiens, Eugen id: '7888' last_name: Wiens - first_name: Werner full_name: Homberg, Werner id: '233' last_name: Homberg citation: ama: Borgert T, Nordieker AB, Wiens E, Homberg W. Investigations to improve the tool life during thermomechanical and incremental forming of steel auxiliary joining elements. Journal of Advanced Joining Processes. 2024;9. doi:10.1016/j.jajp.2024.100185 apa: Borgert, T., Nordieker, A. B., Wiens, E., & Homberg, W. (2024). Investigations to improve the tool life during thermomechanical and incremental forming of steel auxiliary joining elements. Journal of Advanced Joining Processes, 9, Article 100185. https://doi.org/10.1016/j.jajp.2024.100185 bibtex: '@article{Borgert_Nordieker_Wiens_Homberg_2024, title={Investigations to improve the tool life during thermomechanical and incremental forming of steel auxiliary joining elements}, volume={9}, DOI={10.1016/j.jajp.2024.100185}, number={100185}, journal={Journal of Advanced Joining Processes}, publisher={Elsevier BV}, author={Borgert, Thomas and Nordieker, Ansgar Bernhard and Wiens, Eugen and Homberg, Werner}, year={2024} }' chicago: Borgert, Thomas, Ansgar Bernhard Nordieker, Eugen Wiens, and Werner Homberg. “Investigations to Improve the Tool Life during Thermomechanical and Incremental Forming of Steel Auxiliary Joining Elements.” Journal of Advanced Joining Processes 9 (2024). https://doi.org/10.1016/j.jajp.2024.100185. ieee: 'T. Borgert, A. B. Nordieker, E. Wiens, and W. Homberg, “Investigations to improve the tool life during thermomechanical and incremental forming of steel auxiliary joining elements,” Journal of Advanced Joining Processes, vol. 9, Art. no. 100185, 2024, doi: 10.1016/j.jajp.2024.100185.' mla: Borgert, Thomas, et al. “Investigations to Improve the Tool Life during Thermomechanical and Incremental Forming of Steel Auxiliary Joining Elements.” Journal of Advanced Joining Processes, vol. 9, 100185, Elsevier BV, 2024, doi:10.1016/j.jajp.2024.100185. short: T. Borgert, A.B. Nordieker, E. Wiens, W. Homberg, Journal of Advanced Joining Processes 9 (2024). date_created: 2024-06-07T09:31:59Z date_updated: 2026-05-12T11:56:15Z department: - _id: '156' doi: 10.1016/j.jajp.2024.100185 intvolume: ' 9' language: - iso: eng project: - _id: '133' name: TRR 285 - Project Area C - _id: '147' name: TRR 285 - Subproject C03 - _id: '130' name: 'TRR 285: Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen Prozessketten' publication: Journal of Advanced Joining Processes publication_identifier: issn: - 2666-3309 publication_status: published publisher: Elsevier BV status: public title: Investigations to improve the tool life during thermomechanical and incremental forming of steel auxiliary joining elements type: journal_article user_id: '7850' volume: 9 year: '2024' ... --- _id: '51167' article_number: '100181' author: - first_name: B. full_name: Duderija, B. last_name: Duderija - first_name: F. full_name: Sahin, F. last_name: Sahin - first_name: D. full_name: Meinderink, D. last_name: Meinderink - first_name: J.C. full_name: Calderón-Gómez, J.C. last_name: Calderón-Gómez - first_name: H.C. full_name: Schmidt, H.C. last_name: Schmidt - first_name: W. full_name: Homberg, W. last_name: Homberg - first_name: G. full_name: Grundmeier, G. last_name: Grundmeier - first_name: A. full_name: González-Orive, A. last_name: González-Orive citation: ama: Duderija B, Sahin F, Meinderink D, et al. Electropolymerization of acrylic acid on steel for enhanced joining by plastic deformation. Journal of Advanced Joining Processes. 2023;9. doi:10.1016/j.jajp.2023.100181 apa: Duderija, B., Sahin, F., Meinderink, D., Calderón-Gómez, J. C., Schmidt, H. C., Homberg, W., Grundmeier, G., & González-Orive, A. (2023). Electropolymerization of acrylic acid on steel for enhanced joining by plastic deformation. Journal of Advanced Joining Processes, 9, Article 100181. https://doi.org/10.1016/j.jajp.2023.100181 bibtex: '@article{Duderija_Sahin_Meinderink_Calderón-Gómez_Schmidt_Homberg_Grundmeier_González-Orive_2023, title={Electropolymerization of acrylic acid on steel for enhanced joining by plastic deformation}, volume={9}, DOI={10.1016/j.jajp.2023.100181}, number={100181}, journal={Journal of Advanced Joining Processes}, publisher={Elsevier BV}, author={Duderija, B. and Sahin, F. and Meinderink, D. and Calderón-Gómez, J.C. and Schmidt, H.C. and Homberg, W. and Grundmeier, G. and González-Orive, A.}, year={2023} }' chicago: Duderija, B., F. Sahin, D. Meinderink, J.C. Calderón-Gómez, H.C. Schmidt, W. Homberg, G. Grundmeier, and A. González-Orive. “Electropolymerization of Acrylic Acid on Steel for Enhanced Joining by Plastic Deformation.” Journal of Advanced Joining Processes 9 (2023). https://doi.org/10.1016/j.jajp.2023.100181. ieee: 'B. Duderija et al., “Electropolymerization of acrylic acid on steel for enhanced joining by plastic deformation,” Journal of Advanced Joining Processes, vol. 9, Art. no. 100181, 2023, doi: 10.1016/j.jajp.2023.100181.' mla: Duderija, B., et al. “Electropolymerization of Acrylic Acid on Steel for Enhanced Joining by Plastic Deformation.” Journal of Advanced Joining Processes, vol. 9, 100181, Elsevier BV, 2023, doi:10.1016/j.jajp.2023.100181. short: B. Duderija, F. Sahin, D. Meinderink, J.C. Calderón-Gómez, H.C. Schmidt, W. Homberg, G. Grundmeier, A. González-Orive, Journal of Advanced Joining Processes 9 (2023). date_created: 2024-02-06T12:29:53Z date_updated: 2024-02-06T12:32:37Z department: - _id: '321' - _id: '302' doi: 10.1016/j.jajp.2023.100181 intvolume: ' 9' keyword: - Mechanical Engineering - Mechanics of Materials - Engineering (miscellaneous) - Chemical Engineering (miscellaneous) language: - iso: eng publication: Journal of Advanced Joining Processes publication_identifier: issn: - 2666-3309 publication_status: published publisher: Elsevier BV status: public title: Electropolymerization of acrylic acid on steel for enhanced joining by plastic deformation type: journal_article user_id: '54863' volume: 9 year: '2023' ... --- _id: '34253' abstract: - lang: eng text: "Lightweight construction has increasingly become the focus of scientific research in recent years, not least due to\r\nthe constantly increasing fuel price, which is a key factor in the economic viability of many companies. In this\r\nrespect, the use of hybrid structures, made of dissimilar materials offers many advantages. However, such hybrid\r\nstructures often have undesirable side effects. For example, brittle intermetallic phases are formed when\r\naluminum and steel are welded. Clinching as a mechanical joining process does not produce such intermetallic\r\nphases since the connection is realized through form and force closure. In this process, a punch passes through\r\ntwo or more sheets and forms them into a permanent joint in a die. In the present work, the corrosion phenomena\r\nof an aluminum-steel clinched joint have been investigated by both experiments and numerical simulations in\r\norder to explain the superior fatigue behavior of pre-corroded joints. Therefore, the clinched joints have been\r\ncorroded by a three-week salt-spray test. In addition, the electric potential and the von Mises stress are calculated\r\nunder the assumption of a static loading. The results of both experiments and numerical simulations can explain\r\nthe improvement in the fatigue behavior of the corroded specimens. This phenomenon can be attributed to the\r\naccumulation of corrosion products in small gaps between the joined metal sheets." article_number: '100130' author: - first_name: Sven full_name: Harzheim, Sven last_name: Harzheim - first_name: Lars full_name: Ewenz, Lars last_name: Ewenz - first_name: Martina full_name: Zimmermann, Martina last_name: Zimmermann - first_name: Thomas full_name: Wallmersperger, Thomas last_name: Wallmersperger citation: ama: 'Harzheim S, Ewenz L, Zimmermann M, Wallmersperger T. Corrosion Phenomena and Fatigue Behavior of Clinched Joints: Numerical and Experimental Investigations. Journal of Advanced Joining Processes. 2022;6. doi:10.1016/j.jajp.2022.100130' apa: 'Harzheim, S., Ewenz, L., Zimmermann, M., & Wallmersperger, T. (2022). Corrosion Phenomena and Fatigue Behavior of Clinched Joints: Numerical and Experimental Investigations. Journal of Advanced Joining Processes, 6, Article 100130. https://doi.org/10.1016/j.jajp.2022.100130' bibtex: '@article{Harzheim_Ewenz_Zimmermann_Wallmersperger_2022, title={Corrosion Phenomena and Fatigue Behavior of Clinched Joints: Numerical and Experimental Investigations}, volume={6}, DOI={10.1016/j.jajp.2022.100130}, number={100130}, journal={Journal of Advanced Joining Processes}, publisher={Elsevier BV}, author={Harzheim, Sven and Ewenz, Lars and Zimmermann, Martina and Wallmersperger, Thomas}, year={2022} }' chicago: 'Harzheim, Sven, Lars Ewenz, Martina Zimmermann, and Thomas Wallmersperger. “Corrosion Phenomena and Fatigue Behavior of Clinched Joints: Numerical and Experimental Investigations.” Journal of Advanced Joining Processes 6 (2022). https://doi.org/10.1016/j.jajp.2022.100130.' ieee: 'S. Harzheim, L. Ewenz, M. Zimmermann, and T. Wallmersperger, “Corrosion Phenomena and Fatigue Behavior of Clinched Joints: Numerical and Experimental Investigations,” Journal of Advanced Joining Processes, vol. 6, Art. no. 100130, 2022, doi: 10.1016/j.jajp.2022.100130.' mla: 'Harzheim, Sven, et al. “Corrosion Phenomena and Fatigue Behavior of Clinched Joints: Numerical and Experimental Investigations.” Journal of Advanced Joining Processes, vol. 6, 100130, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100130.' short: S. Harzheim, L. Ewenz, M. Zimmermann, T. Wallmersperger, Journal of Advanced Joining Processes 6 (2022). date_created: 2022-12-06T19:29:59Z date_updated: 2023-01-02T11:04:06Z department: - _id: '630' doi: 10.1016/j.jajp.2022.100130 intvolume: ' 6' keyword: - Mechanical Engineering - Mechanics of Materials - Engineering (miscellaneous) - Chemical Engineering (miscellaneous) language: - iso: eng main_file_link: - open_access: '1' url: https://www.sciencedirect.com/science/article/pii/S2666330922000346?via%3Dihub oa: '1' project: - _id: '130' grant_number: '418701707' name: 'TRR 285: TRR 285' - _id: '132' name: 'TRR 285 - B: TRR 285 - Project Area B' - _id: '141' name: 'TRR 285 – B02: TRR 285 - Subproject B02' - _id: '142' name: 'TRR 285 – B03: TRR 285 - Subproject B03' publication: Journal of Advanced Joining Processes publication_identifier: issn: - 2666-3309 publication_status: published publisher: Elsevier BV status: public title: 'Corrosion Phenomena and Fatigue Behavior of Clinched Joints: Numerical and Experimental Investigations' type: journal_article user_id: '14931' volume: 6 year: '2022' ... --- _id: '43021' article_number: '100137' author: - first_name: B. full_name: Duderija, B. last_name: Duderija - first_name: A. full_name: González-Orive, A. last_name: González-Orive - first_name: H.C. full_name: Schmidt, H.C. last_name: Schmidt - first_name: J.C. full_name: Calderón, J.C. last_name: Calderón - first_name: I. full_name: Hordych, I. last_name: Hordych - first_name: H.J. full_name: Maier, H.J. last_name: Maier - first_name: W. full_name: Homberg, W. last_name: Homberg - first_name: G. full_name: Grundmeier, G. last_name: Grundmeier citation: ama: 'Duderija B, González-Orive A, Schmidt HC, et al. Electrografting of BTSE: Zn films for advanced steel-aluminum joining by plastic deformation. Journal of Advanced Joining Processes. 2022;7. doi:10.1016/j.jajp.2022.100137' apa: 'Duderija, B., González-Orive, A., Schmidt, H. C., Calderón, J. C., Hordych, I., Maier, H. J., Homberg, W., & Grundmeier, G. (2022). Electrografting of BTSE: Zn films for advanced steel-aluminum joining by plastic deformation. Journal of Advanced Joining Processes, 7, Article 100137. https://doi.org/10.1016/j.jajp.2022.100137' bibtex: '@article{Duderija_González-Orive_Schmidt_Calderón_Hordych_Maier_Homberg_Grundmeier_2022, title={Electrografting of BTSE: Zn films for advanced steel-aluminum joining by plastic deformation}, volume={7}, DOI={10.1016/j.jajp.2022.100137}, number={100137}, journal={Journal of Advanced Joining Processes}, publisher={Elsevier BV}, author={Duderija, B. and González-Orive, A. and Schmidt, H.C. and Calderón, J.C. and Hordych, I. and Maier, H.J. and Homberg, W. and Grundmeier, G.}, year={2022} }' chicago: 'Duderija, B., A. González-Orive, H.C. Schmidt, J.C. Calderón, I. Hordych, H.J. Maier, W. Homberg, and G. Grundmeier. “Electrografting of BTSE: Zn Films for Advanced Steel-Aluminum Joining by Plastic Deformation.” Journal of Advanced Joining Processes 7 (2022). https://doi.org/10.1016/j.jajp.2022.100137.' ieee: 'B. Duderija et al., “Electrografting of BTSE: Zn films for advanced steel-aluminum joining by plastic deformation,” Journal of Advanced Joining Processes, vol. 7, Art. no. 100137, 2022, doi: 10.1016/j.jajp.2022.100137.' mla: 'Duderija, B., et al. “Electrografting of BTSE: Zn Films for Advanced Steel-Aluminum Joining by Plastic Deformation.” Journal of Advanced Joining Processes, vol. 7, 100137, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100137.' short: B. Duderija, A. González-Orive, H.C. Schmidt, J.C. Calderón, I. Hordych, H.J. Maier, W. Homberg, G. Grundmeier, Journal of Advanced Joining Processes 7 (2022). date_created: 2023-03-14T13:02:55Z date_updated: 2024-02-06T12:33:20Z department: - _id: '321' - _id: '302' doi: 10.1016/j.jajp.2022.100137 intvolume: ' 7' keyword: - Mechanical Engineering - Mechanics of Materials - Engineering (miscellaneous) - Chemical Engineering (miscellaneous) language: - iso: eng publication: Journal of Advanced Joining Processes publication_identifier: issn: - 2666-3309 publication_status: published publisher: Elsevier BV status: public title: 'Electrografting of BTSE: Zn films for advanced steel-aluminum joining by plastic deformation' type: journal_article user_id: '54863' volume: 7 year: '2022' ... --- _id: '31828' article_number: '100108' author: - first_name: Robert full_name: Kupfer, Robert last_name: Kupfer - first_name: Daniel full_name: Köhler, Daniel last_name: Köhler - first_name: David full_name: Römisch, David last_name: Römisch - first_name: Simon full_name: Wituschek, Simon last_name: Wituschek - first_name: Lars full_name: Ewenz, Lars last_name: Ewenz - first_name: Jan full_name: Kalich, Jan last_name: Kalich - first_name: Deborah full_name: Weiß, Deborah id: '45673' last_name: Weiß - first_name: Behdad full_name: Sadeghian, Behdad last_name: Sadeghian - first_name: Matthias full_name: Busch, Matthias last_name: Busch - first_name: Jan full_name: Krüger, Jan last_name: Krüger - first_name: Moritz full_name: Neuser, Moritz id: '32340' last_name: Neuser - first_name: Olexandr full_name: Grydin, Olexandr id: '43822' last_name: Grydin - first_name: Max full_name: Böhnke, Max id: '45779' last_name: Böhnke - first_name: Christian Roman full_name: Bielak, Christian Roman id: '34782' last_name: Bielak - first_name: Juliane full_name: Troschitz, Juliane last_name: Troschitz citation: ama: Kupfer R, Köhler D, Römisch D, et al. Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties. Journal of Advanced Joining Processes. 2022;5. doi:10.1016/j.jajp.2022.100108 apa: Kupfer, R., Köhler, D., Römisch, D., Wituschek, S., Ewenz, L., Kalich, J., Weiß, D., Sadeghian, B., Busch, M., Krüger, J., Neuser, M., Grydin, O., Böhnke, M., Bielak, C. R., & Troschitz, J. (2022). Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties. Journal of Advanced Joining Processes, 5, Article 100108. https://doi.org/10.1016/j.jajp.2022.100108 bibtex: '@article{Kupfer_Köhler_Römisch_Wituschek_Ewenz_Kalich_Weiß_Sadeghian_Busch_Krüger_et al._2022, title={Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties}, volume={5}, DOI={10.1016/j.jajp.2022.100108}, number={100108}, journal={Journal of Advanced Joining Processes}, publisher={Elsevier BV}, author={Kupfer, Robert and Köhler, Daniel and Römisch, David and Wituschek, Simon and Ewenz, Lars and Kalich, Jan and Weiß, Deborah and Sadeghian, Behdad and Busch, Matthias and Krüger, Jan and et al.}, year={2022} }' chicago: Kupfer, Robert, Daniel Köhler, David Römisch, Simon Wituschek, Lars Ewenz, Jan Kalich, Deborah Weiß, et al. “Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties.” Journal of Advanced Joining Processes 5 (2022). https://doi.org/10.1016/j.jajp.2022.100108. ieee: 'R. Kupfer et al., “Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties,” Journal of Advanced Joining Processes, vol. 5, Art. no. 100108, 2022, doi: 10.1016/j.jajp.2022.100108.' mla: Kupfer, Robert, et al. “Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties.” Journal of Advanced Joining Processes, vol. 5, 100108, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100108. short: R. Kupfer, D. Köhler, D. Römisch, S. Wituschek, L. Ewenz, J. Kalich, D. Weiß, B. Sadeghian, M. Busch, J. Krüger, M. Neuser, O. Grydin, M. Böhnke, C.R. Bielak, J. Troschitz, Journal of Advanced Joining Processes 5 (2022). date_created: 2022-06-09T06:23:00Z date_updated: 2024-03-14T15:22:46Z department: - _id: '157' - _id: '158' doi: 10.1016/j.jajp.2022.100108 intvolume: ' 5' keyword: - Mechanical Engineering - Mechanics of Materials - Engineering (miscellaneous) - Chemical Engineering (miscellaneous) language: - iso: eng project: - _id: '130' grant_number: '418701707' name: 'TRR 285: TRR 285' - _id: '131' name: 'TRR 285 - A: TRR 285 - Project Area A' - _id: '59' grant_number: '231447078' name: 'TRR 142 - A02: TRR 142 - Subproject A02' publication: Journal of Advanced Joining Processes publication_identifier: issn: - 2666-3309 publication_status: published publisher: Elsevier BV quality_controlled: '1' status: public title: Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties type: journal_article user_id: '32340' volume: 5 year: '2022' ... --- _id: '34215' abstract: - lang: eng text: 'Clinching as a mechanical joining technique allows a fast and reliable joining of metal sheets in large-scale production. An efficient design and dimensioning of clinched joints requires a holistic understanding of the material, the joining process and the resulting properties of the joint. In this paper, the process chain for clinching metal sheets is described and experimental techniques are proposed to analyze the process-microstructure-property relationships from the sheet metal to the joined structure. At the example of clinching aluminum EN AW 6014, characterization methods are applied and discussed for the following characteristics: the mechanical properties of the sheet materials, the tribological behavior in the joining system, the joining process and the resulting material structure, the load-bearing behavior of the joint, the damage and degradation as well as the service life and crack growth behavior. The compilation of the characterization methods gives an overview on the advantages and weaknesses of the methods and the multiple interactions of material, process and properties during clinching. In addition, the results of the analyses on EN AW 6014 can be applied for parameterization and validation of simulations.' article_number: '100108' author: - first_name: Robert full_name: Kupfer, Robert last_name: Kupfer - first_name: Daniel full_name: Köhler, Daniel last_name: Köhler - first_name: David full_name: Römisch, David last_name: Römisch - first_name: Simon full_name: Wituschek, Simon last_name: Wituschek - first_name: Lars full_name: Ewenz, Lars last_name: Ewenz - first_name: Jan full_name: Kalich, Jan last_name: Kalich - first_name: Deborah full_name: Weiß, Deborah id: '45673' last_name: Weiß - first_name: Behdad full_name: Sadeghian, Behdad last_name: Sadeghian - first_name: Matthias full_name: Busch, Matthias last_name: Busch - first_name: Jan Tobias full_name: Krüger, Jan Tobias id: '44307' last_name: Krüger orcid: 0000-0002-0827-9654 - first_name: Moritz full_name: Neuser, Moritz id: '32340' last_name: Neuser - first_name: Olexandr full_name: Grydin, Olexandr id: '43822' last_name: Grydin - first_name: Max full_name: Böhnke, Max id: '45779' last_name: Böhnke - first_name: Christian Roman full_name: Bielak, Christian Roman id: '34782' last_name: Bielak - first_name: Juliane full_name: Troschitz, Juliane last_name: Troschitz citation: ama: Kupfer R, Köhler D, Römisch D, et al. Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties. Journal of Advanced Joining Processes. 2022;5. doi:10.1016/j.jajp.2022.100108 apa: Kupfer, R., Köhler, D., Römisch, D., Wituschek, S., Ewenz, L., Kalich, J., Weiß, D., Sadeghian, B., Busch, M., Krüger, J. T., Neuser, M., Grydin, O., Böhnke, M., Bielak, C. R., & Troschitz, J. (2022). Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties. Journal of Advanced Joining Processes, 5, Article 100108. https://doi.org/10.1016/j.jajp.2022.100108 bibtex: '@article{Kupfer_Köhler_Römisch_Wituschek_Ewenz_Kalich_Weiß_Sadeghian_Busch_Krüger_et al._2022, title={Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties}, volume={5}, DOI={10.1016/j.jajp.2022.100108}, number={100108}, journal={Journal of Advanced Joining Processes}, publisher={Elsevier BV}, author={Kupfer, Robert and Köhler, Daniel and Römisch, David and Wituschek, Simon and Ewenz, Lars and Kalich, Jan and Weiß, Deborah and Sadeghian, Behdad and Busch, Matthias and Krüger, Jan Tobias and et al.}, year={2022} }' chicago: Kupfer, Robert, Daniel Köhler, David Römisch, Simon Wituschek, Lars Ewenz, Jan Kalich, Deborah Weiß, et al. “Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties.” Journal of Advanced Joining Processes 5 (2022). https://doi.org/10.1016/j.jajp.2022.100108. ieee: 'R. Kupfer et al., “Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties,” Journal of Advanced Joining Processes, vol. 5, Art. no. 100108, 2022, doi: 10.1016/j.jajp.2022.100108.' mla: Kupfer, Robert, et al. “Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties.” Journal of Advanced Joining Processes, vol. 5, 100108, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100108. short: R. Kupfer, D. Köhler, D. Römisch, S. Wituschek, L. Ewenz, J. Kalich, D. Weiß, B. Sadeghian, M. Busch, J.T. Krüger, M. Neuser, O. Grydin, M. Böhnke, C.R. Bielak, J. Troschitz, Journal of Advanced Joining Processes 5 (2022). date_created: 2022-12-05T21:17:22Z date_updated: 2024-03-20T11:54:33Z department: - _id: '630' - _id: '158' doi: 10.1016/j.jajp.2022.100108 intvolume: ' 5' keyword: - Mechanical Engineering - Mechanics of Materials - Engineering (miscellaneous) - Chemical Engineering (miscellaneous) language: - iso: eng project: - _id: '130' grant_number: '418701707' name: 'TRR 285: TRR 285' - _id: '133' name: 'TRR 285 - C: TRR 285 - Project Area C' - _id: '148' name: 'TRR 285 – C04: TRR 285 - Subproject C04' - _id: '146' name: 'TRR 285 – C02: TRR 285 - Subproject C02' - _id: '145' name: 'TRR 285 – C01: TRR 285 - Subproject C01' - _id: '132' name: 'TRR 285 - B: TRR 285 - Project Area B' - _id: '141' name: 'TRR 285 – B02: TRR 285 - Subproject B02' - _id: '138' name: 'TRR 285 – A04: TRR 285 - Subproject A04' - _id: '135' name: 'TRR 285 – A01: TRR 285 - Subproject A01' - _id: '136' name: 'TRR 285 – A02: TRR 285 - Subproject A02' - _id: '149' name: 'TRR 285 – C05: TRR 285 - Subproject C05' - _id: '143' name: 'TRR 285 – B04: TRR 285 - Subproject B04' publication: Journal of Advanced Joining Processes publication_identifier: issn: - 2666-3309 publication_status: published publisher: Elsevier BV quality_controlled: '1' status: public title: Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties type: journal_article user_id: '34782' volume: 5 year: '2022' ... --- _id: '34216' abstract: - lang: eng text: Mechanical joining technologies are increasingly used in multi-material lightweight constructions and offer opportunities to create versatile joining processes due to their low heat input, robustness to metallurgical incompatibilities and various process variants. They can be categorised into technologies which require an auxiliary joining element, or do not require an auxiliary joining element. A typical example for a mechanical joining process with auxiliary joining element is self-piercing riveting. A wide range of processes exist which are not requiring an auxiliary joining element. This allows both point-shaped (e.g., by clinching) and line-shaped (e.g., friction stir welding) joints to be produced. In order to achieve versatile processes, challenges exist in particular in the creation of intervention possibilities in the process and the understanding and handling of materials that are difficult to join, such as fiber reinforced plastics (FRP) or high-strength metals. In addition, predictive capability is required, which in particular requires accurate process simulation. Finally, the processes must be measured non-destructively in order to generate control variables in the process or to investigate the cause-effect relationship. This paper covers the state of the art in scientific research concerning mechanical joining and discusses future challenges on the way to versatile mechanical joining processes. article_number: '100113' author: - first_name: Gerson full_name: Meschut, Gerson id: '32056' last_name: Meschut orcid: 0000-0002-2763-1246 - first_name: M. full_name: Merklein, M. last_name: Merklein - first_name: A. full_name: Brosius, A. last_name: Brosius - first_name: D. full_name: Drummer, D. last_name: Drummer - first_name: L. full_name: Fratini, L. last_name: Fratini - first_name: U. full_name: Füssel, U. last_name: Füssel - first_name: M. full_name: Gude, M. last_name: Gude - first_name: Werner full_name: Homberg, Werner id: '233' last_name: Homberg - first_name: P.A.F. full_name: Martins, P.A.F. last_name: Martins - first_name: Mathias full_name: Bobbert, Mathias id: '7850' last_name: Bobbert - first_name: M. full_name: Lechner, M. last_name: Lechner - first_name: R. full_name: Kupfer, R. last_name: Kupfer - first_name: B. full_name: Gröger, B. last_name: Gröger - first_name: Daxin full_name: Han, Daxin id: '36544' last_name: Han - first_name: J. full_name: Kalich, J. last_name: Kalich - first_name: Fabian full_name: Kappe, Fabian id: '66459' last_name: Kappe - first_name: T. full_name: Kleffel, T. last_name: Kleffel - first_name: D. full_name: Köhler, D. last_name: Köhler - first_name: C.-M. full_name: Kuball, C.-M. last_name: Kuball - first_name: J. full_name: Popp, J. last_name: Popp - first_name: D. full_name: Römisch, D. last_name: Römisch - first_name: J. full_name: Troschitz, J. last_name: Troschitz - first_name: Christian full_name: Wischer, Christian id: '72219' last_name: Wischer - first_name: S. full_name: Wituschek, S. last_name: Wituschek - first_name: M. full_name: Wolf, M. last_name: Wolf citation: ama: Meschut G, Merklein M, Brosius A, et al. Review on mechanical joining by plastic deformation. Journal of Advanced Joining Processes. 2022;5. doi:10.1016/j.jajp.2022.100113 apa: Meschut, G., Merklein, M., Brosius, A., Drummer, D., Fratini, L., Füssel, U., Gude, M., Homberg, W., Martins, P. A. F., Bobbert, M., Lechner, M., Kupfer, R., Gröger, B., Han, D., Kalich, J., Kappe, F., Kleffel, T., Köhler, D., Kuball, C.-M., … Wolf, M. (2022). Review on mechanical joining by plastic deformation. Journal of Advanced Joining Processes, 5, Article 100113. https://doi.org/10.1016/j.jajp.2022.100113 bibtex: '@article{Meschut_Merklein_Brosius_Drummer_Fratini_Füssel_Gude_Homberg_Martins_Bobbert_et al._2022, title={Review on mechanical joining by plastic deformation}, volume={5}, DOI={10.1016/j.jajp.2022.100113}, number={100113}, journal={Journal of Advanced Joining Processes}, publisher={Elsevier BV}, author={Meschut, Gerson and Merklein, M. and Brosius, A. and Drummer, D. and Fratini, L. and Füssel, U. and Gude, M. and Homberg, Werner and Martins, P.A.F. and Bobbert, Mathias and et al.}, year={2022} }' chicago: Meschut, Gerson, M. Merklein, A. Brosius, D. Drummer, L. Fratini, U. Füssel, M. Gude, et al. “Review on Mechanical Joining by Plastic Deformation.” Journal of Advanced Joining Processes 5 (2022). https://doi.org/10.1016/j.jajp.2022.100113. ieee: 'G. Meschut et al., “Review on mechanical joining by plastic deformation,” Journal of Advanced Joining Processes, vol. 5, Art. no. 100113, 2022, doi: 10.1016/j.jajp.2022.100113.' mla: Meschut, Gerson, et al. “Review on Mechanical Joining by Plastic Deformation.” Journal of Advanced Joining Processes, vol. 5, 100113, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100113. short: G. Meschut, M. Merklein, A. Brosius, D. Drummer, L. Fratini, U. Füssel, M. Gude, W. Homberg, P.A.F. Martins, M. Bobbert, M. Lechner, R. Kupfer, B. Gröger, D. Han, J. Kalich, F. Kappe, T. Kleffel, D. Köhler, C.-M. Kuball, J. Popp, D. Römisch, J. Troschitz, C. Wischer, S. Wituschek, M. Wolf, Journal of Advanced Joining Processes 5 (2022). date_created: 2022-12-05T21:24:49Z date_updated: 2023-04-27T08:52:38Z department: - _id: '157' - _id: '156' - _id: '9' doi: 10.1016/j.jajp.2022.100113 intvolume: ' 5' keyword: - Mechanical Engineering - Mechanics of Materials - Engineering (miscellaneous) - Chemical Engineering (miscellaneous) language: - iso: eng project: - _id: '130' grant_number: '418701707' name: 'TRR 285: TRR 285' - _id: '131' name: 'TRR 285 - A: TRR 285 - Project Area A' - _id: '135' name: 'TRR 285 – A01: TRR 285 - Subproject A01' - _id: '138' name: 'TRR 285 – A04: TRR 285 - Subproject A04' - _id: '137' name: 'TRR 285 – A03: TRR 285 - Subproject A03' - _id: '132' name: 'TRR 285 - B: TRR 285 - Project Area B' - _id: '140' name: 'TRR 285 – B01: TRR 285 - Subproject B01' - _id: '133' name: 'TRR 285 - C: TRR 285 - Project Area C' - _id: '145' name: 'TRR 285 – C01: TRR 285 - Subproject C01' - _id: '146' name: 'TRR 285 – C02: TRR 285 - Subproject C02' - _id: '147' name: 'TRR 285 – C03: TRR 285 - Subproject C03' - _id: '148' name: 'TRR 285 – C04: TRR 285 - Subproject C04' publication: Journal of Advanced Joining Processes publication_identifier: issn: - 2666-3309 publication_status: published publisher: Elsevier BV quality_controlled: '1' status: public title: Review on mechanical joining by plastic deformation type: journal_article user_id: '66459' volume: 5 year: '2022' ... --- _id: '32275' article_number: '100113' author: - first_name: G. full_name: Meschut, G. last_name: Meschut - first_name: M. full_name: Merklein, M. last_name: Merklein - first_name: A. full_name: Brosius, A. last_name: Brosius - first_name: D. full_name: Drummer, D. last_name: Drummer - first_name: L. full_name: Fratini, L. last_name: Fratini - first_name: U. full_name: Füssel, U. last_name: Füssel - first_name: M. full_name: Gude, M. last_name: Gude - first_name: W. full_name: Homberg, W. last_name: Homberg - first_name: P.A.F. full_name: Martins, P.A.F. last_name: Martins - first_name: M. full_name: Bobbert, M. last_name: Bobbert - first_name: M. full_name: Lechner, M. last_name: Lechner - first_name: R. full_name: Kupfer, R. last_name: Kupfer - first_name: B. full_name: Gröger, B. last_name: Gröger - first_name: D. full_name: Han, D. last_name: Han - first_name: J. full_name: Kalich, J. last_name: Kalich - first_name: F. full_name: Kappe, F. last_name: Kappe - first_name: T. full_name: Kleffel, T. last_name: Kleffel - first_name: D. full_name: Köhler, D. last_name: Köhler - first_name: C.-M. full_name: Kuball, C.-M. last_name: Kuball - first_name: J. full_name: Popp, J. last_name: Popp - first_name: D. full_name: Römisch, D. last_name: Römisch - first_name: J. full_name: Troschitz, J. last_name: Troschitz - first_name: C. full_name: Wischer, C. last_name: Wischer - first_name: S. full_name: Wituschek, S. last_name: Wituschek - first_name: M. full_name: Wolf, M. last_name: Wolf citation: ama: Meschut G, Merklein M, Brosius A, et al. Review on mechanical joining by plastic deformation. Journal of Advanced Joining Processes. 2022;5. doi:10.1016/j.jajp.2022.100113 apa: Meschut, G., Merklein, M., Brosius, A., Drummer, D., Fratini, L., Füssel, U., Gude, M., Homberg, W., Martins, P. A. F., Bobbert, M., Lechner, M., Kupfer, R., Gröger, B., Han, D., Kalich, J., Kappe, F., Kleffel, T., Köhler, D., Kuball, C.-M., … Wolf, M. (2022). Review on mechanical joining by plastic deformation. Journal of Advanced Joining Processes, 5, Article 100113. https://doi.org/10.1016/j.jajp.2022.100113 bibtex: '@article{Meschut_Merklein_Brosius_Drummer_Fratini_Füssel_Gude_Homberg_Martins_Bobbert_et al._2022, title={Review on mechanical joining by plastic deformation}, volume={5}, DOI={10.1016/j.jajp.2022.100113}, number={100113}, journal={Journal of Advanced Joining Processes}, publisher={Elsevier BV}, author={Meschut, G. and Merklein, M. and Brosius, A. and Drummer, D. and Fratini, L. and Füssel, U. and Gude, M. and Homberg, W. and Martins, P.A.F. and Bobbert, M. and et al.}, year={2022} }' chicago: Meschut, G., M. Merklein, A. Brosius, D. Drummer, L. Fratini, U. Füssel, M. Gude, et al. “Review on Mechanical Joining by Plastic Deformation.” Journal of Advanced Joining Processes 5 (2022). https://doi.org/10.1016/j.jajp.2022.100113. ieee: 'G. Meschut et al., “Review on mechanical joining by plastic deformation,” Journal of Advanced Joining Processes, vol. 5, Art. no. 100113, 2022, doi: 10.1016/j.jajp.2022.100113.' mla: Meschut, G., et al. “Review on Mechanical Joining by Plastic Deformation.” Journal of Advanced Joining Processes, vol. 5, 100113, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100113. short: G. Meschut, M. Merklein, A. Brosius, D. Drummer, L. Fratini, U. Füssel, M. Gude, W. Homberg, P.A.F. Martins, M. Bobbert, M. Lechner, R. Kupfer, B. Gröger, D. Han, J. Kalich, F. Kappe, T. Kleffel, D. Köhler, C.-M. Kuball, J. Popp, D. Römisch, J. Troschitz, C. Wischer, S. Wituschek, M. Wolf, Journal of Advanced Joining Processes 5 (2022). date_created: 2022-06-29T07:42:45Z date_updated: 2023-04-27T08:55:13Z doi: 10.1016/j.jajp.2022.100113 intvolume: ' 5' keyword: - Mechanical Engineering - Mechanics of Materials - Engineering (miscellaneous) - Chemical Engineering (miscellaneous) language: - iso: eng publication: Journal of Advanced Joining Processes publication_identifier: issn: - 2666-3309 publication_status: published publisher: Elsevier BV quality_controlled: '1' status: public title: Review on mechanical joining by plastic deformation type: journal_article user_id: '66459' volume: 5 year: '2022' ... --- _id: '51193' article_number: '100108' author: - first_name: Robert full_name: Kupfer, Robert last_name: Kupfer - first_name: Daniel full_name: Köhler, Daniel last_name: Köhler - first_name: David full_name: Römisch, David last_name: Römisch - first_name: Simon full_name: Wituschek, Simon last_name: Wituschek - first_name: Lars full_name: Ewenz, Lars last_name: Ewenz - first_name: Jan full_name: Kalich, Jan last_name: Kalich - first_name: Deborah full_name: Weiß, Deborah last_name: Weiß - first_name: Behdad full_name: Sadeghian, Behdad last_name: Sadeghian - first_name: Matthias full_name: Busch, Matthias last_name: Busch - first_name: Jan full_name: Krüger, Jan last_name: Krüger - first_name: Moritz full_name: Neuser, Moritz last_name: Neuser - first_name: Olexandr full_name: Grydin, Olexandr last_name: Grydin - first_name: Max full_name: Böhnke, Max last_name: Böhnke - first_name: Christian-Roman full_name: Bielak, Christian-Roman last_name: Bielak - first_name: Juliane full_name: Troschitz, Juliane last_name: Troschitz citation: ama: Kupfer R, Köhler D, Römisch D, et al. Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties. Journal of Advanced Joining Processes. 2022;5. doi:10.1016/j.jajp.2022.100108 apa: Kupfer, R., Köhler, D., Römisch, D., Wituschek, S., Ewenz, L., Kalich, J., Weiß, D., Sadeghian, B., Busch, M., Krüger, J., Neuser, M., Grydin, O., Böhnke, M., Bielak, C.-R., & Troschitz, J. (2022). Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties. Journal of Advanced Joining Processes, 5, Article 100108. https://doi.org/10.1016/j.jajp.2022.100108 bibtex: '@article{Kupfer_Köhler_Römisch_Wituschek_Ewenz_Kalich_Weiß_Sadeghian_Busch_Krüger_et al._2022, title={Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties}, volume={5}, DOI={10.1016/j.jajp.2022.100108}, number={100108}, journal={Journal of Advanced Joining Processes}, publisher={Elsevier BV}, author={Kupfer, Robert and Köhler, Daniel and Römisch, David and Wituschek, Simon and Ewenz, Lars and Kalich, Jan and Weiß, Deborah and Sadeghian, Behdad and Busch, Matthias and Krüger, Jan and et al.}, year={2022} }' chicago: Kupfer, Robert, Daniel Köhler, David Römisch, Simon Wituschek, Lars Ewenz, Jan Kalich, Deborah Weiß, et al. “Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties.” Journal of Advanced Joining Processes 5 (2022). https://doi.org/10.1016/j.jajp.2022.100108. ieee: 'R. Kupfer et al., “Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties,” Journal of Advanced Joining Processes, vol. 5, Art. no. 100108, 2022, doi: 10.1016/j.jajp.2022.100108.' mla: Kupfer, Robert, et al. “Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties.” Journal of Advanced Joining Processes, vol. 5, 100108, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100108. short: R. Kupfer, D. Köhler, D. Römisch, S. Wituschek, L. Ewenz, J. Kalich, D. Weiß, B. Sadeghian, M. Busch, J. Krüger, M. Neuser, O. Grydin, M. Böhnke, C.-R. Bielak, J. Troschitz, Journal of Advanced Joining Processes 5 (2022). date_created: 2024-02-06T15:01:32Z date_updated: 2025-06-02T20:20:08Z doi: 10.1016/j.jajp.2022.100108 intvolume: ' 5' keyword: - Mechanical Engineering - Mechanics of Materials - Engineering (miscellaneous) - Chemical Engineering (miscellaneous) language: - iso: eng publication: Journal of Advanced Joining Processes publication_identifier: issn: - 2666-3309 publication_status: published publisher: Elsevier BV status: public title: Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties type: journal_article user_id: '83408' volume: 5 year: '2022' ... --- _id: '51196' article_number: '100113' author: - first_name: G. full_name: Meschut, G. last_name: Meschut - first_name: M. full_name: Merklein, M. last_name: Merklein - first_name: A. full_name: Brosius, A. last_name: Brosius - first_name: D. full_name: Drummer, D. last_name: Drummer - first_name: L. full_name: Fratini, L. last_name: Fratini - first_name: U. full_name: Füssel, U. last_name: Füssel - first_name: M. full_name: Gude, M. last_name: Gude - first_name: W. full_name: Homberg, W. last_name: Homberg - first_name: P.A.F. full_name: Martins, P.A.F. last_name: Martins - first_name: M. full_name: Bobbert, M. last_name: Bobbert - first_name: M. full_name: Lechner, M. last_name: Lechner - first_name: R. full_name: Kupfer, R. last_name: Kupfer - first_name: B. full_name: Gröger, B. last_name: Gröger - first_name: D. full_name: Han, D. last_name: Han - first_name: J. full_name: Kalich, J. last_name: Kalich - first_name: F. full_name: Kappe, F. last_name: Kappe - first_name: T. full_name: Kleffel, T. last_name: Kleffel - first_name: D. full_name: Köhler, D. last_name: Köhler - first_name: C.-M. full_name: Kuball, C.-M. last_name: Kuball - first_name: J. full_name: Popp, J. last_name: Popp - first_name: D. full_name: Römisch, D. last_name: Römisch - first_name: J. full_name: Troschitz, J. last_name: Troschitz - first_name: C. full_name: Wischer, C. last_name: Wischer - first_name: S. full_name: Wituschek, S. last_name: Wituschek - first_name: M. full_name: Wolf, M. last_name: Wolf citation: ama: Meschut G, Merklein M, Brosius A, et al. Review on mechanical joining by plastic deformation. Journal of Advanced Joining Processes. 2022;5. doi:10.1016/j.jajp.2022.100113 apa: Meschut, G., Merklein, M., Brosius, A., Drummer, D., Fratini, L., Füssel, U., Gude, M., Homberg, W., Martins, P. A. F., Bobbert, M., Lechner, M., Kupfer, R., Gröger, B., Han, D., Kalich, J., Kappe, F., Kleffel, T., Köhler, D., Kuball, C.-M., … Wolf, M. (2022). Review on mechanical joining by plastic deformation. Journal of Advanced Joining Processes, 5, Article 100113. https://doi.org/10.1016/j.jajp.2022.100113 bibtex: '@article{Meschut_Merklein_Brosius_Drummer_Fratini_Füssel_Gude_Homberg_Martins_Bobbert_et al._2022, title={Review on mechanical joining by plastic deformation}, volume={5}, DOI={10.1016/j.jajp.2022.100113}, number={100113}, journal={Journal of Advanced Joining Processes}, publisher={Elsevier BV}, author={Meschut, G. and Merklein, M. and Brosius, A. and Drummer, D. and Fratini, L. and Füssel, U. and Gude, M. and Homberg, W. and Martins, P.A.F. and Bobbert, M. and et al.}, year={2022} }' chicago: Meschut, G., M. Merklein, A. Brosius, D. Drummer, L. Fratini, U. Füssel, M. Gude, et al. “Review on Mechanical Joining by Plastic Deformation.” Journal of Advanced Joining Processes 5 (2022). https://doi.org/10.1016/j.jajp.2022.100113. ieee: 'G. Meschut et al., “Review on mechanical joining by plastic deformation,” Journal of Advanced Joining Processes, vol. 5, Art. no. 100113, 2022, doi: 10.1016/j.jajp.2022.100113.' mla: Meschut, G., et al. “Review on Mechanical Joining by Plastic Deformation.” Journal of Advanced Joining Processes, vol. 5, 100113, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100113. short: G. Meschut, M. Merklein, A. Brosius, D. Drummer, L. Fratini, U. Füssel, M. Gude, W. Homberg, P.A.F. Martins, M. Bobbert, M. Lechner, R. Kupfer, B. Gröger, D. Han, J. Kalich, F. Kappe, T. Kleffel, D. Köhler, C.-M. Kuball, J. Popp, D. Römisch, J. Troschitz, C. Wischer, S. Wituschek, M. Wolf, Journal of Advanced Joining Processes 5 (2022). date_created: 2024-02-06T15:03:43Z date_updated: 2025-06-02T20:20:04Z doi: 10.1016/j.jajp.2022.100113 intvolume: ' 5' keyword: - Mechanical Engineering - Mechanics of Materials - Engineering (miscellaneous) - Chemical Engineering (miscellaneous) language: - iso: eng publication: Journal of Advanced Joining Processes publication_identifier: issn: - 2666-3309 publication_status: published publisher: Elsevier BV status: public title: Review on mechanical joining by plastic deformation type: journal_article user_id: '83408' volume: 5 year: '2022' ... --- _id: '34069' article_number: '100133' author: - first_name: Britta full_name: Schramm, Britta id: '4668' last_name: Schramm - first_name: Sven full_name: Martin, Sven id: '38177' last_name: Martin - first_name: Christian full_name: Steinfelder, Christian last_name: Steinfelder - first_name: Christian Roman full_name: Bielak, Christian Roman id: '34782' last_name: Bielak - first_name: Alexander full_name: Brosius, Alexander last_name: Brosius - first_name: Gerson full_name: Meschut, Gerson id: '32056' last_name: Meschut orcid: 0000-0002-2763-1246 - first_name: Thomas full_name: Tröster, Thomas id: '553' last_name: Tröster - first_name: Thomas full_name: Wallmersperger, Thomas last_name: Wallmersperger - first_name: Julia full_name: Mergheim, Julia last_name: Mergheim citation: ama: 'Schramm B, Martin S, Steinfelder C, et al. A Review on the Modeling of the Clinching Process Chain - Part I: Design Phase. Journal of Advanced Joining Processes. 2022;6. doi:10.1016/j.jajp.2022.100133' apa: 'Schramm, B., Martin, S., Steinfelder, C., Bielak, C. R., Brosius, A., Meschut, G., Tröster, T., Wallmersperger, T., & Mergheim, J. (2022). A Review on the Modeling of the Clinching Process Chain - Part I: Design Phase. Journal of Advanced Joining Processes, 6, Article 100133. https://doi.org/10.1016/j.jajp.2022.100133' bibtex: '@article{Schramm_Martin_Steinfelder_Bielak_Brosius_Meschut_Tröster_Wallmersperger_Mergheim_2022, title={A Review on the Modeling of the Clinching Process Chain - Part I: Design Phase}, volume={6}, DOI={10.1016/j.jajp.2022.100133}, number={100133}, journal={Journal of Advanced Joining Processes}, publisher={Elsevier BV}, author={Schramm, Britta and Martin, Sven and Steinfelder, Christian and Bielak, Christian Roman and Brosius, Alexander and Meschut, Gerson and Tröster, Thomas and Wallmersperger, Thomas and Mergheim, Julia}, year={2022} }' chicago: 'Schramm, Britta, Sven Martin, Christian Steinfelder, Christian Roman Bielak, Alexander Brosius, Gerson Meschut, Thomas Tröster, Thomas Wallmersperger, and Julia Mergheim. “A Review on the Modeling of the Clinching Process Chain - Part I: Design Phase.” Journal of Advanced Joining Processes 6 (2022). https://doi.org/10.1016/j.jajp.2022.100133.' ieee: 'B. Schramm et al., “A Review on the Modeling of the Clinching Process Chain - Part I: Design Phase,” Journal of Advanced Joining Processes, vol. 6, Art. no. 100133, 2022, doi: 10.1016/j.jajp.2022.100133.' mla: 'Schramm, Britta, et al. “A Review on the Modeling of the Clinching Process Chain - Part I: Design Phase.” Journal of Advanced Joining Processes, vol. 6, 100133, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100133.' short: B. Schramm, S. Martin, C. Steinfelder, C.R. Bielak, A. Brosius, G. Meschut, T. Tröster, T. Wallmersperger, J. Mergheim, Journal of Advanced Joining Processes 6 (2022). date_created: 2022-11-14T08:53:49Z date_updated: 2026-05-12T12:59:39Z department: - _id: '143' - _id: '157' doi: 10.1016/j.jajp.2022.100133 intvolume: ' 6' keyword: - Mechanical Engineering - Mechanics of Materials - Engineering (miscellaneous) - Chemical Engineering (miscellaneous) language: - iso: eng project: - _id: '130' name: 'TRR 285: TRR 285' - _id: '143' name: 'TRR 285 – B04: TRR 285 - Subproject B04' - _id: '140' name: 'TRR 285 – B01: TRR 285 - Subproject B01' - _id: '135' name: 'TRR 285 – A01: TRR 285 - Subproject A01' - _id: '142' name: 'TRR 285 – B03: TRR 285 - Subproject B03' - _id: '139' name: 'TRR 285 – A05: TRR 285 - Subproject A05' - _id: '132' name: TRR 285 - Project Area B - _id: '131' name: TRR 285 - Project Area A publication: Journal of Advanced Joining Processes publication_identifier: issn: - 2666-3309 publication_status: published publisher: Elsevier BV quality_controlled: '1' status: public title: 'A Review on the Modeling of the Clinching Process Chain - Part I: Design Phase' type: journal_article user_id: '7850' volume: 6 year: '2022' ... --- _id: '34068' article_number: '100134' author: - first_name: Britta full_name: Schramm, Britta id: '4668' last_name: Schramm - first_name: Johannes full_name: Friedlein, Johannes last_name: Friedlein - first_name: Benjamin full_name: Gröger, Benjamin last_name: Gröger - first_name: Christian Roman full_name: Bielak, Christian Roman id: '34782' last_name: Bielak - first_name: Mathias full_name: Bobbert, Mathias id: '7850' last_name: Bobbert - first_name: Maik full_name: Gude, Maik last_name: Gude - first_name: Gerson full_name: Meschut, Gerson id: '32056' last_name: Meschut orcid: 0000-0002-2763-1246 - first_name: Thomas full_name: Wallmersperger, Thomas last_name: Wallmersperger - first_name: Julia full_name: Mergheim, Julia last_name: Mergheim citation: ama: 'Schramm B, Friedlein J, Gröger B, et al. A Review on the Modeling of the Clinching Process Chain - Part II: Joining Process. Journal of Advanced Joining Processes. Published online 2022. doi:10.1016/j.jajp.2022.100134' apa: 'Schramm, B., Friedlein, J., Gröger, B., Bielak, C. R., Bobbert, M., Gude, M., Meschut, G., Wallmersperger, T., & Mergheim, J. (2022). A Review on the Modeling of the Clinching Process Chain - Part II: Joining Process. Journal of Advanced Joining Processes, Article 100134. https://doi.org/10.1016/j.jajp.2022.100134' bibtex: '@article{Schramm_Friedlein_Gröger_Bielak_Bobbert_Gude_Meschut_Wallmersperger_Mergheim_2022, title={A Review on the Modeling of the Clinching Process Chain - Part II: Joining Process}, DOI={10.1016/j.jajp.2022.100134}, number={100134}, journal={Journal of Advanced Joining Processes}, publisher={Elsevier BV}, author={Schramm, Britta and Friedlein, Johannes and Gröger, Benjamin and Bielak, Christian Roman and Bobbert, Mathias and Gude, Maik and Meschut, Gerson and Wallmersperger, Thomas and Mergheim, Julia}, year={2022} }' chicago: 'Schramm, Britta, Johannes Friedlein, Benjamin Gröger, Christian Roman Bielak, Mathias Bobbert, Maik Gude, Gerson Meschut, Thomas Wallmersperger, and Julia Mergheim. “A Review on the Modeling of the Clinching Process Chain - Part II: Joining Process.” Journal of Advanced Joining Processes, 2022. https://doi.org/10.1016/j.jajp.2022.100134.' ieee: 'B. Schramm et al., “A Review on the Modeling of the Clinching Process Chain - Part II: Joining Process,” Journal of Advanced Joining Processes, Art. no. 100134, 2022, doi: 10.1016/j.jajp.2022.100134.' mla: 'Schramm, Britta, et al. “A Review on the Modeling of the Clinching Process Chain - Part II: Joining Process.” Journal of Advanced Joining Processes, 100134, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100134.' short: B. Schramm, J. Friedlein, B. Gröger, C.R. Bielak, M. Bobbert, M. Gude, G. Meschut, T. Wallmersperger, J. Mergheim, Journal of Advanced Joining Processes (2022). date_created: 2022-11-14T08:53:07Z date_updated: 2026-05-12T12:58:23Z department: - _id: '143' - _id: '157' doi: 10.1016/j.jajp.2022.100134 keyword: - Mechanical Engineering - Mechanics of Materials - Engineering (miscellaneous) - Chemical Engineering (miscellaneous) language: - iso: eng project: - _id: '130' name: 'TRR 285: TRR 285' - _id: '143' name: 'TRR 285 – B04: TRR 285 - Subproject B04' - _id: '139' name: 'TRR 285 – A05: TRR 285 - Subproject A05' - _id: '137' name: 'TRR 285 – A03: TRR 285 - Subproject A03' - _id: '135' name: 'TRR 285 – A01: TRR 285 - Subproject A01' - _id: '142' name: 'TRR 285 – B03: TRR 285 - Subproject B03' - _id: '131' name: TRR 285 - Project Area A - _id: '132' name: TRR 285 - Project Area B publication: Journal of Advanced Joining Processes publication_identifier: issn: - 2666-3309 publication_status: published publisher: Elsevier BV quality_controlled: '1' status: public title: 'A Review on the Modeling of the Clinching Process Chain - Part II: Joining Process' type: journal_article user_id: '7850' year: '2022' ... --- _id: '34070' article_number: '100135' author: - first_name: Britta full_name: Schramm, Britta id: '4668' last_name: Schramm - first_name: Sven full_name: Harzheim, Sven last_name: Harzheim - first_name: Deborah full_name: Weiß, Deborah id: '45673' last_name: Weiß - first_name: Tintu David full_name: Joy, Tintu David id: '30821' last_name: Joy - first_name: Martin full_name: Hofmann, Martin last_name: Hofmann - first_name: Julia full_name: Mergheim, Julia last_name: Mergheim - first_name: Thomas full_name: Wallmersperger, Thomas last_name: Wallmersperger citation: ama: 'Schramm B, Harzheim S, Weiß D, et al. A Review on the Modeling of the Clinching Process Chain - Part III: Operational Phase. Journal of Advanced Joining Processes. Published online 2022. doi:10.1016/j.jajp.2022.100135' apa: 'Schramm, B., Harzheim, S., Weiß, D., Joy, T. D., Hofmann, M., Mergheim, J., & Wallmersperger, T. (2022). A Review on the Modeling of the Clinching Process Chain - Part III: Operational Phase. Journal of Advanced Joining Processes, Article 100135. https://doi.org/10.1016/j.jajp.2022.100135' bibtex: '@article{Schramm_Harzheim_Weiß_Joy_Hofmann_Mergheim_Wallmersperger_2022, title={A Review on the Modeling of the Clinching Process Chain - Part III: Operational Phase}, DOI={10.1016/j.jajp.2022.100135}, number={100135}, journal={Journal of Advanced Joining Processes}, publisher={Elsevier BV}, author={Schramm, Britta and Harzheim, Sven and Weiß, Deborah and Joy, Tintu David and Hofmann, Martin and Mergheim, Julia and Wallmersperger, Thomas}, year={2022} }' chicago: 'Schramm, Britta, Sven Harzheim, Deborah Weiß, Tintu David Joy, Martin Hofmann, Julia Mergheim, and Thomas Wallmersperger. “A Review on the Modeling of the Clinching Process Chain - Part III: Operational Phase.” Journal of Advanced Joining Processes, 2022. https://doi.org/10.1016/j.jajp.2022.100135.' ieee: 'B. Schramm et al., “A Review on the Modeling of the Clinching Process Chain - Part III: Operational Phase,” Journal of Advanced Joining Processes, Art. no. 100135, 2022, doi: 10.1016/j.jajp.2022.100135.' mla: 'Schramm, Britta, et al. “A Review on the Modeling of the Clinching Process Chain - Part III: Operational Phase.” Journal of Advanced Joining Processes, 100135, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100135.' short: B. Schramm, S. Harzheim, D. Weiß, T.D. Joy, M. Hofmann, J. Mergheim, T. Wallmersperger, Journal of Advanced Joining Processes (2022). date_created: 2022-11-14T08:55:34Z date_updated: 2026-05-12T12:52:34Z department: - _id: '143' doi: 10.1016/j.jajp.2022.100135 keyword: - Mechanical Engineering - Mechanics of Materials - Engineering (miscellaneous) - Chemical Engineering (miscellaneous) language: - iso: eng project: - _id: '130' name: 'TRR 285: TRR 285' - _id: '143' name: 'TRR 285 – B04: TRR 285 - Subproject B04' - _id: '142' name: 'TRR 285 – B03: TRR 285 - Subproject B03' - _id: '139' name: 'TRR 285 – A05: TRR 285 - Subproject A05' - _id: '132' name: TRR 285 - Project Area B - _id: '131' name: TRR 285 - Project Area A publication: Journal of Advanced Joining Processes publication_identifier: issn: - 2666-3309 publication_status: published publisher: Elsevier BV quality_controlled: '1' status: public title: 'A Review on the Modeling of the Clinching Process Chain - Part III: Operational Phase' type: journal_article user_id: '7850' year: '2022' ...