@article{45183,
  abstract     = {{<jats:p>We investigated the effect of fluorinated molecules on dipalmitoylphosphatidylcholine (DPPC) bilayers by force-field molecular dynamics simulations. In the first step, we developed all-atom force-field parameters for additive molecules in membranes to enable an accurate description of those systems. On the basis of this force field, we performed extensive simulations of various bilayer systems containing different additives. The additive molecules were chosen to be of different size and shape, and they included small molecules such as perfluorinated alcohols, but also more complex molecules. From these simulations, we investigated the structural and dynamic effects of the additives on the membrane properties, as well as the behavior of the additive molecules themselves. Our results are in good agreement with other theoretical and experimental studies, and they contribute to a microscopic understanding of interactions, which might be used to specifically tune membrane properties by additives in the future.</jats:p>}},
  author       = {{Peschel, Christopher and Brehm, Martin and Sebastiani, Daniel}},
  issn         = {{2073-4360}},
  journal      = {{Polymers}},
  keywords     = {{Polymers and Plastics, General Chemistry}},
  number       = {{9}},
  publisher    = {{MDPI AG}},
  title        = {{{Polyphilic Interactions as Structural Driving Force Investigated by Molecular Dynamics Simulation (Project 7)}}},
  doi          = {{10.3390/polym9090445}},
  volume       = {{9}},
  year         = {{2017}},
}

@article{27402,
  author       = {{Abdelgawad, Kareem and Gausemeier, Jürgen and Trächtler, Ansgar and Gausemeier, Sandra and Dumitrescu, Roman and Berssenbrügge, Jan and Stöcklein, Jörg and Grafe, Michael}},
  journal      = {{Designs ‒ International Journal of Engineering Designs, Band 1}},
  number       = {{1}},
  pages        = {{6.1--6.47}},
  publisher    = {{MDPI AG}},
  title        = {{{An Application-Oriented Design Method for Networked Driving Simulation}}},
  doi          = {{10.3390/designs1010006}},
  volume       = {{1}},
  year         = {{2017}},
}

@article{27406,
  author       = {{Abdelgawad, Kareem and Gausemeier, Jürgen and Dumitrescu, Roman and Grafe, Michael and Stöcklein, Jörg and Berssenbrügge, Jan}},
  journal      = {{Designs ‒ International Journal of Engineering Designs, Band 1 }},
  number       = {{1}},
  pages        = {{4.1--4.17}},
  publisher    = {{MDPI AG}},
  title        = {{{Networked Driving Simulation: Applications, State of the Art, and Design Considerations}}},
  doi          = {{10.3390/designs1010004}},
  volume       = {{1}},
  year         = {{2017}},
}

@article{7481,
  abstract     = {{The electronic band structures of hexagonal ZnO and cubic ZnS, ZnSe, and ZnTe compounds are determined within hybrid-density-functional theory and quasiparticle calculations. It is found that the band-edge energies calculated on the G0W0 (Zn chalcogenides) or GW (ZnO) level of theory agree well with experiment, while fully self-consistent QSGW calculations are required for the correct description of the Zn 3d bands. The quasiparticle band structures are used to calculate the linear response and second-harmonic-generation (SHG) spectra of the Zn–VI compounds. Excitonic effects in the optical absorption are accounted for within the Bethe–Salpeter approach. The calculated spectra are discussed in the context of previous experimental data and present SHG measurements for ZnO.}},
  author       = {{Riefer, Arthur and Weber, Nils and Mund, Johannes and Yakovlev, Dmitri R. and Bayer, Manfred and Schindlmayr, Arno and Meier, Cedrik and Schmidt, Wolf Gero}},
  issn         = {{1361-648X}},
  journal      = {{Journal of Physics: Condensed Matter}},
  number       = {{21}},
  publisher    = {{IOP Publishing}},
  title        = {{{Zn–VI quasiparticle gaps and optical spectra from many-body calculations}}},
  doi          = {{10.1088/1361-648x/aa6b2a}},
  volume       = {{29}},
  year         = {{2017}},
}

@inproceedings{24219,
  abstract     = {{In this paper we present theoretical, simulated and measured data for a reader to tag communication RFID system at 5.8 GHz. First a theoretical link budget analysis for a reader to tag architecture is shown for a wireless industrial application at 1m distance. This includes a power budget of the passively powered transponder. The received power level of the backscattered data for the theoretical link budget is -52:5 dBm. For the first setup slot antennas are developed and measured in the anechoic chamber. The measured gain is 4.0 dB. The power of the backscatter data in setup 1 is -74:8 dBm. This corresponds to the theoretical link budget since, all losses such as cable or lower antenna gain are taken into account. Setup 2 is upgraded on the reader side with horn antennas. At 5.8 GHz, the gain reaches the value of 10.8 dB. The second setup shows improvement in the receiving backscattered power to a value of -62:4 dBm. Furthermore, as a solution to detect those transponders not presented in the main slope of the antenna, a steerable beam is introduced by means of a Rotman lens. On the topic of the passive transponder, different harvesting topologies at 5.8 GHz are investigated, and the efficiency simulation of the harvesting circuitry has been performed. The simulated efficiency of the implemented technique is 68 %.}},
  author       = {{Kuhn, Peter and Haddadian, Sanaz and Meyer, Frederic and Hoffmann, Marc and Grabmaier, Anton and Scheytt, Christoph and Kaiser, Thomas}},
  booktitle    = {{Smart SysTech 2017; European Conference on Smart Objects, Systems and Technologies}},
  isbn         = {{978-3-8007-4428-2}},
  publisher    = {{VDE ITG}},
  title        = {{{SHF RFID System for Automatic Process Optimization with Intelligent Tools}}},
  year         = {{2017}},
}

@inproceedings{58667,
  abstract     = {{In this work, an innovative approach for the design and structuring of teaching videos systematically using 3D animations is presented. The approach focuses on the quantitative description of electromagnetic fields and the mathematical methods and competencies required for this purpose, exemplarily with regard to an undergraduate electrical engineering course during the initial phase of corresponding degree programs. An essential part of this course is the spatial and time-dependent description of electromagnetic fields. For this purpose, students have to work with multiple integrals in 3D space and in different coordinate systems. Such subjects are typically covered only later in mathematics courses and without a technical context, therefore leading to major difficulties for many students. The videos presented in this work are intended to support students and lecturers to work with these subjects in an instructive fashion. The 3D animations allow for effectively clarifying complex connections between technical and mathematical aspects. The videos and their specific design are discussed with regard to didactic and technical considerations. Additionally, their integration with existing interventions for the course is described.}},
  author       = {{Hennig, Markus and Mertsching, Bärbel}},
  booktitle    = {{Proceedings of the 3rd International Conference on Higher Education Advances (HEAd’17)}},
  publisher    = {{Universitat Politècnica València}},
  title        = {{{Innovative 3D Animations for Teaching Electromagnetic Field Theory and its Mathematics in Undergraduate Engineering}}},
  doi          = {{10.4995/head17.2017.5327}},
  year         = {{2017}},
}

@article{60397,
  author       = {{Campen, Marcel}},
  issn         = {{0272-1716}},
  journal      = {{IEEE Computer Graphics and Applications}},
  number       = {{3}},
  pages        = {{88--95}},
  publisher    = {{Institute of Electrical and Electronics Engineers (IEEE)}},
  title        = {{{Tiling the Bunny: Quad Layouts for Efficient 3D Geometry Representation}}},
  doi          = {{10.1109/mcg.2017.35}},
  volume       = {{37}},
  year         = {{2017}},
}

@inbook{60902,
  author       = {{Senk, Johanna and Yegenoglu, Alper and Amblet, Olivier and Brukau, Yury and Davison, Andrew and Lester, David Roland and Lührs, Anna and Quaglio, Pietro and Rostami, Vahid and Rowley, Andrew and Schuller, Bernd and Stokes, Alan Barry and van Albada, Sacha Jennifer and Zielasko, Daniel and Diesmann, Markus and Weyers, Benjamin and Denker, Michael and Grün, Sonja}},
  booktitle    = {{Lecture Notes in Computer Science}},
  isbn         = {{9783319538617}},
  issn         = {{0302-9743}},
  publisher    = {{Springer International Publishing}},
  title        = {{{A Collaborative Simulation-Analysis Workflow for Computational Neuroscience Using HPC}}},
  doi          = {{10.1007/978-3-319-53862-4_21}},
  year         = {{2017}},
}

@article{34440,
  abstract     = {{In this paper, the influence of surface roughness on the local tribological load with a dry sliding contact is studied. First, three artificial rough surfaces with similar structure but different asperity heights are generated and projected on a smooth ball. After that, a contact pattern is determined between a rough ball and a smooth surface taking into account the elastic only as well as the linear elastic-perfectly plastic material description. On the basis of the calculated contact pressure distribution, the subsurface stresses and a three-dimensional temperature distribution in the sliding contact are calculated. The solutions show that a low surface roughness not necessarily results in low local tribological load of the surface. }},
  author       = {{Magyar, Balázs and Sauer, Bernd}},
  journal      = {{Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology}},
  number       = {{4}},
  pages        = {{489--502}},
  title        = {{{Methods for the simulation of the pressure, stress, and temperature distribution in the contact of fractal generated rough surfaces}}},
  doi          = {{10.1177/1350650115593962}},
  volume       = {{231}},
  year         = {{2017}},
}

@inproceedings{25258,
  author       = {{Weber,  Jens}},
  publisher    = {{Springer}},
  title        = {{{A Multi-User-Collaboration Platform Concept for Managing Simulation-Based Optimization of Virtual Tooling as Big Data Exchange Service}}},
  year         = {{2016}},
}

@article{19842,
  abstract     = {{Non-trivial electronic properties of silver telluride and other chalcogenides, such as the presence of a topological insulator state, electronic topological transitions, metallization, and the possible emergence of superconductivity under pressure have attracted attention in recent years. In this work, we studied the electronic properties of silver selenide (Ag2Se). We performed direct current electrical resistivity measurements, in situ Raman spectroscopy, and synchrotron x-ray diffraction accompanied by ab initio calculations to explore pressure-induced changes to the atomic and electronic structure of Ag2Se. The temperature dependence of the electrical resistivity was measured up to 30 GPa in the 4–300 K temperature interval. Resistivity data showed an unusual increase in the thermal energy gap of phase I, which is a semiconductor under ambient conditions. Recently, a similar effect was reported for the 3D topological insulator Bi2Se3. Raman spectroscopy studies revealed lattice instability in phase I indicated by the softening of observed vibrational modes with pressure. Our hybrid functional band structure calculations predicted that phase I of Ag2Se would be a narrow band gap semiconductor, in accordance with experimental results. At a pressure of ~7.5 GPa, Ag2Se underwent a structural transition to phase II with an orthorhombic Pnma structure. The temperature dependence of the resistivity of Ag2Se phase II demonstrated its metallic character. Ag2Se phase III, which is stable above 16.5 GPa, is also metallic according to the resistivity data. No indication of the superconducting transition is found above 4 K in the studied pressure range.}},
  author       = {{Naumov, P and Barkalov, O and Mirhosseini, Hossein and Felser, C and A Medvedev, S}},
  journal      = {{Journal of Physics: Condensed Matter}},
  number       = {{38}},
  pages        = {{385801}},
  publisher    = {{{IOP} Publishing}},
  title        = {{{Atomic and electronic structures evolution of the narrow band gap semiconductor Ag2Se under high pressure}}},
  doi          = {{10.1088/0953-8984/28/38/385801}},
  volume       = {{28}},
  year         = {{2016}},
}

@inproceedings{19961,
  abstract     = {{The self-organizing bio-hybrid collaboration ofrobots and natural plants allows for a variety of interestingapplications. As an example we investigate how robots can beused to control the growth and motion of a natural plant, using LEDs to provide stimuli. We follow an evolutionaryrobotics approach where task performance is determined bymonitoring the plant's reaction. First, we do initial plantexperiments with simple, predetermined controllers. Then weuse image sampling data as a model of the dynamics ofthe plant tip xy position. Second, we use this approach toevolve robot controllers in simulation. The task is to makethe plant approach three predetermined, distinct points in anxy-plane. Finally, we test the evolved controllers in real plantexperiments and find that we cross the reality gap successfully. We shortly describe how we have extended from plant tipto many points on the plant, for a model of the plant stemdynamics. Future work will extend to two-axes image samplingfor a 3-d approach.}},
  author       = {{Wahby, Mostafa and Hofstadler, Daniel Nicolas and Heinrich, Mary Katherine and Zahadat, Payam and Hamann, Heiko}},
  booktitle    = {{Proc. of the 10th International Conference on Self-Adaptive and Self-Organizing Systems}},
  isbn         = {{9781509035342}},
  title        = {{{An Evolutionary Robotics Approach to the Control of Plant Growth and Motion: Modeling Plants and Crossing the Reality Gap}}},
  doi          = {{10.1109/saso.2016.8}},
  year         = {{2016}},
}

@article{27978,
  author       = {{Weber, KS and Buyken, Anette and Nowotny, B and Strassburger, K and Simon, MC and Pacini, G and Szendroedi, J and Müssig, K and Roden, M and Group, GDS}},
  issn         = {{0947-7349}},
  journal      = {{Exp Clin Endocrinol Diabetes}},
  number       = {{4}},
  pages        = {{230--238}},
  title        = {{{The Impact of Dietary Factors on Glycemic Control, Insulin Sensitivity and Secretion in the First Years after Diagnosis of Diabetes.}}},
  doi          = {{10.1055/s-0035-1569354}},
  volume       = {{124}},
  year         = {{2016}},
}

@article{27982,
  author       = {{Weber, KS and Knebel, B and Strassburger, K and Kotzka, J and Stehle, P and Szendroedi, J and Müssig, K and Buyken, Anette and Roden, M and Group, GDS}},
  issn         = {{1475-2840}},
  journal      = {{Cardiovasc Diabetol}},
  number       = {{1}},
  pages        = {{138}},
  title        = {{{Associations between explorative dietary patterns and serum lipid levels and their interactions with ApoA5 and ApoE haplotype in patients with recently diagnosed type 2 diabetes.}}},
  doi          = {{10.1186/s12933-016-0455-9}},
  volume       = {{15}},
  year         = {{2016}},
}

@inproceedings{26477,
  author       = {{Marx, Edgard and Höffner, Konrad and Shekarpour, Saeedeh and Ngonga Ngomo, Axel-Cyrille and Lehmann, Jens and Auer, Sören}},
  booktitle    = {{Metadata and Semantics Research - 10th International Conference, {MTSR} 2016, G{\"{o}}ttingen, Germany, November 22-25, 2016, Proceedings}},
  editor       = {{Garoufallou, Emmanouel and Subirats Coll, Imma and Stellato, Armando and Greenberg, Jane}},
  pages        = {{249--261}},
  title        = {{{Exploring Term Networks for Semantic Search over RDF Knowledge Graphs}}},
  doi          = {{10.1007/978-3-319-49157-8\_22}},
  volume       = {{672}},
  year         = {{2016}},
}

@article{26882,
  author       = {{Klünder, Nina and Meier-Gräwe, Uta}},
  journal      = {{Wie die Zeit vergeht. Analysen zur Zeitverwendung in Deutschland. Beiträge zur Ergebniskonferenz der Zeitverwendungserhebung }},
  pages        = {{65--90}},
  publisher    = {{Statistisches Bundesamt }},
  title        = {{{Gleichstellung und innerfamiliale Arbeitsteilung. Mahlzeitenmuster und Beköstigungsarbeit in Familien im Zeitvergleich}}},
  year         = {{2016}},
}

@article{26923,
  author       = {{Goletzke, J and Atkinson, F S and Ek, K L and Bell, K and Brand-Miller, J C and Buyken, Anette}},
  issn         = {{0954-3007}},
  journal      = {{European Journal of Clinical Nutrition}},
  pages        = {{808--811}},
  title        = {{{Glycaemic and insulin index of four common German breads}}},
  doi          = {{10.1038/ejcn.2016.9}},
  year         = {{2016}},
}

@article{26924,
  abstract     = {{<jats:title>Abstract</jats:title><jats:p>Given that commercial complementary food (CF) can contain high levels of added sugar, a high consumption may predispose to a preference for sweet taste later in life. This study examined cross-sectional associations between commercial CF consumption and added sugar intake in infancy as well as its prospective relation to added sugar intake in pre-school and primary-school age children. In all, 288 children of the Dortmund Nutritional and Anthropometric Longitudinally Designed Study with 3-d weighed dietary records at 0·5 and 0·75 (infancy), 3 and 4 (pre-school age) and 6 and 7 years of age (primary-school age) were included in this analysis. Individual commercial CF consumption as percentage of total commercial CF (%cCF) was averaged at 0·5 and 0·75 years. Individual total added sugar intake (g/d, energy percentage/d) was averaged for all three age groups. Multivariable logistic and linear regression models were used to analyse associations between %cCF and added sugar intake. In infancy, a higher %cCF was associated with odds for high added sugar intake from CF and for high total added sugar intake (&gt;75th percentile, <jats:italic>P</jats:italic>&lt;0·033). Prospectively, a higher %cCF was related to higher added sugar intake in both pre-school (<jats:italic>P</jats:italic>&lt;0·041) and primary-school age children (<jats:italic>P</jats:italic>&lt;0·039), although these associations were attenuated in models adjusting for added sugar intake in infancy. A higher %cCF in infancy may predispose to higher added sugar intake in later childhood by virtue of its added sugar content. Therefore, offering home-made CF or carefully chosen commercial CF without added sugar might be one strategy to reduce sugar intake in infancy and later on.</jats:p>}},
  author       = {{Foterek, Kristina and Buyken, Anette and Bolzenius, Katja and Hilbig, Annett and Nöthlings, Ute and Alexy, Ute}},
  issn         = {{0007-1145}},
  journal      = {{British Journal of Nutrition}},
  pages        = {{2067--2074}},
  title        = {{{Commercial complementary food consumption is prospectively associated with added sugar intake in childhood}}},
  doi          = {{10.1017/s0007114516001367}},
  year         = {{2016}},
}

@article{26925,
  author       = {{Roßbach, Sarah and Diederichs, Tanja and Bolzenius, Katja and Herder, Christian and Buyken, Anette and Alexy, Ute}},
  issn         = {{1436-6207}},
  journal      = {{European Journal of Nutrition}},
  pages        = {{2507--2517}},
  title        = {{{Age and time trends in eating frequency and duration of nightly fasting of German children and adolescents}}},
  doi          = {{10.1007/s00394-016-1286-x}},
  year         = {{2016}},
}

@article{26926,
  author       = {{Harris, C and Buyken, Anette and von Berg, A and Berdel, D and Lehmann, I and Hoffmann, B and Koletzko, S and Koletzko, B and Heinrich, J and Standl, M}},
  issn         = {{1475-2891}},
  journal      = {{Nutr J}},
  number       = {{1}},
  pages        = {{101}},
  title        = {{{Prospective associations of meat consumption during childhood with measures of body composition during adolescence: results from the GINIplus and LISAplus birth cohorts.}}},
  doi          = {{10.1186/s12937-016-0222-5}},
  volume       = {{15}},
  year         = {{2016}},
}