@misc{35436, author = {{Alpsancar, Suzana}}, booktitle = {{Nachdenken über Technik}}, number = {{3}}, pages = {{66--71}}, publisher = {{Nomos}}, title = {{{Rezension zu Jean Baudrillard: Similucares et Simulation 1981/Simulacra and Simulation 1994}}}, doi = {{10.5771/9783845269238-66}}, year = {{2013}}, } @phdthesis{42184, author = {{Sauerland, Kim-Henning}}, publisher = {{Shaker}}, title = {{{Phenomenological Process Simulation and Multiscale Tool Simulation Directed to a Hybrid Forming Process}}}, year = {{2013}}, } @article{39523, abstract = {{ABSTRACTThermoelectric generators (TEG) are capable of transforming waste heat directly into electric power. With higher temperatures the yield of the devices rises which makes high-temperature contact materials important. The formation of titanium disilicide (TiSi2) and its properties were analyzed and optimized for the use in TEG. Depending on a direct or an indirect transformation into the C54 crystal structure the process forms a layer with a resistivity of 20-22 μΩcm. Process gases influence the resistivity and result in difference of 20 %. The growing rate of TiSi2on silicon dioxide was determined; it shows a strong dependence on the used atmosphere and temperature. A maximum overgrowing length of 30 μm was found.}}, author = {{Assion, Fabian and Schönhoff, Marcel and Hilleringmann, Ulrich}}, issn = {{0272-9172}}, journal = {{MRS Proceedings}}, keywords = {{General Engineering}}, pages = {{97--102}}, publisher = {{Springer Science and Business Media LLC}}, title = {{{Formation and Properties of TiSi2 as Contact Material for High-Temperature Thermoelectric Generators}}}, doi = {{10.1557/opl.2012.1557}}, volume = {{1490}}, year = {{2013}}, } @inproceedings{39524, author = {{Kanwar, K. and Fischer, C. and Geneiss, V. and Mager, T. and Ballhausen, U. and Hedayat, C. and Hilleringmann, Ulrich}}, booktitle = {{2012 IEEE International Conference on RFID-Technologies and Applications (RFID-TA)}}, publisher = {{IEEE}}, title = {{{Electrical characterization of rubber mixture sheets based on a coaxial probe method in combination with 3D electromagnetic simulation model}}}, doi = {{10.1109/rfid-ta.2012.6404507}}, year = {{2013}}, } @inproceedings{39516, author = {{Kanwar, K. and Geneiss, V. and Mager, T. and Scheele, S. and Ballhausen, U. and Hedayat, C. and Hilleringmann, Ulrich}}, booktitle = {{2013 21st International Conference on Software, Telecommunications and Computer Networks - (SoftCOM 2013)}}, publisher = {{IEEE}}, title = {{{Design and analysis of UHF RFID tag for a rubber transmission belt based on 3D electrical model}}}, doi = {{10.1109/softcom.2013.6671864}}, year = {{2013}}, } @article{56304, author = {{Bachmann, Ronald and Baumgarten, Daniel}}, issn = {{2193-9012}}, journal = {{IZA Journal of European Labor Studies}}, number = {{1}}, publisher = {{Springer Science and Business Media LLC}}, title = {{{How do the unemployed search for a job? – Evidence from the EU Labour Force Survey}}}, doi = {{10.1186/2193-9012-2-22}}, volume = {{2}}, year = {{2013}}, } @inproceedings{56540, author = {{Dargie, Waltenegus and Mendez, Julian and Möbius, Christoph and Rybina, Kateryna and Thost, Veronika and Turhan, Anni-Yasmin}}, booktitle = {{2013 IEEE International Conference on Pervasive Computing and Communications Workshops, PERCOM 2013 Workshops, San Diego, CA, USA, March 18-22, 2013}}, pages = {{31–36}}, publisher = {{IEEE Computer Society}}, title = {{{Situation recognition for service management systems using OWL 2 reasoners}}}, doi = {{10.1109/PERCOMW.2013.6529452}}, year = {{2013}}, } @inproceedings{28540, author = {{Bauer, Frank and Gausemeier, Jürgen and Rudtsch, Vinzent}}, publisher = {{publishing series of the Heinz Nixdorf Institute, Paderborn}}, title = {{{Automated generation of material flow simulation models for the timely safeguarding of production systems}}}, volume = {{311}}, year = {{2013}}, } @inproceedings{57715, author = {{Jöllenbeck, Thomas and Beck, K and Neuhaus, Dorothee and Pietschmann, J and Wawer, C}}, booktitle = {{22. Rehabilitationswissenschaftliches Kolloquium: Teilhabe 2.0 - Reha neu denken? DRV Schriften}}, pages = {{374--377}}, title = {{{Feedback-Training zum Erlernen einer vorgegeben Teilbelastung beim Gehen mit Gehstützen}}}, volume = {{101}}, year = {{2013}}, } @inproceedings{58669, author = {{Hennig, Markus and Gaspers, Daniel and Mertsching, Barbel}}, booktitle = {{12th International Conference on Information Technology Based Higher Education and Training (ITHET)}}, publisher = {{IEEE}}, title = {{{Interactive WebGL-based 3D Visualizations for Situated Mathematics Teaching}}}, doi = {{10.1109/ithet.2013.6671038}}, year = {{2013}}, } @article{60451, abstract = {{Nowadays, digital 3D models are in widespread and ubiquitous use, and each specific application dealing with 3D geometry has its own quality requirements that restrict the class of acceptable and supported models. This article analyzes typical defects that make a 3D model unsuitable for key application contexts, and surveys existing algorithms that process, repair, and improve its structure, geometry, and topology to make it appropriate to case-by-case requirements. The analysis is focused on polygon meshes, which constitute by far the most common 3D object representation. In particular, this article provides a structured overview of mesh repairing techniques from the point of view of the application context. Different types of mesh defects are classified according to the upstream application that produced the mesh, whereas mesh quality requirements are grouped by representative sets of downstream applications where the mesh is to be used. The numerous mesh repair methods that have been proposed during the last two decades are analyzed and classified in terms of their capabilities, properties, and guarantees. Based on these classifications, guidelines can be derived to support the identification of repairing algorithms best-suited to bridge the compatibility gap between the quality provided by the upstream process and the quality required by the downstream applications in a given geometry processing scenario.}}, author = {{Attene, Marco and Campen, Marcel and Kobbelt, Leif}}, issn = {{0360-0300}}, journal = {{ACM Computing Surveys}}, number = {{2}}, pages = {{1--33}}, publisher = {{Association for Computing Machinery (ACM)}}, title = {{{Polygon mesh repairing}}}, doi = {{10.1145/2431211.2431214}}, volume = {{45}}, year = {{2013}}, } @inproceedings{60454, author = {{Zimmer, Henrik and Campen, Marcel and Kobbelt, Leif}}, booktitle = {{2013 IEEE Conference on Computer Vision and Pattern Recognition}}, publisher = {{IEEE}}, title = {{{Efficient Computation of Shortest Path-Concavity for 3D Meshes}}}, doi = {{10.1109/cvpr.2013.280}}, year = {{2013}}, } @misc{64956, author = {{Mersch, Katharina Ulrike}}, booktitle = {{Niedersächsisches Jahrbuch für Landesgeschichte}}, pages = {{461--465}}, title = {{{Inschriften als Zeugnisse kulturellen Gedächtnisses. 40 Jahre Deutsche Inschriften in Göttingen. Beiträge zum Jubiläumskolloquium vom 22. Oktober 2010 in Göttingen, hrsg. von Nikolaus Henkel. Wiesbaden 2012 / Die Inschriften des Landkreises Holzminden, bearb. von Jörg H. Lampe und MeikeWilling. Wiesbaden 2012 (Die Deutschen Inschriften 83 / Göttinger Reihe 15)}}}, volume = {{85}}, year = {{2013}}, } @inproceedings{25432, author = {{Morsey, Mohamed and Lehmann, Jens and Auer, Sören and Ngonga Ngomo, Axel-Cyrille}}, booktitle = {{Proceedings of the Twenty-Sixth {AAAI} Conference on Artificial Intelligence, July 22-26, 2012, Toronto, Ontario, Canada}}, editor = {{Hoffmann, Jörg and Selman, Bart}}, publisher = {{{AAAI} Press}}, title = {{{Usage-Centric Benchmarking of RDF Triple Stores}}}, year = {{2012}}, } @inproceedings{25436, author = {{Shekarpour, Saeedeh and Ngonga Ngomo, Axel-Cyrille and Auer, Sören}}, booktitle = {{Semantic Technology, Second Joint International Conference, {JIST} 2012, Nara, Japan, December 2-4, 2012. Proceedings}}, editor = {{Takeda, Hideaki and Qu, Yuzhong and Mizoguchi, Riichiro and Kitamura, Yoshinobu}}, pages = {{159--174}}, publisher = {{Springer}}, title = {{{Keyword-Driven Resource Disambiguation over RDF Knowledge Bases}}}, doi = {{10.1007/978-3-642-37996-3\_11}}, volume = {{7774}}, year = {{2012}}, } @article{27972, author = {{Buyken, Anette and Alexy, U and Kersting, M and Remer, T}}, issn = {{1436-9990}}, journal = {{Bundesgesundheitsblatt Gesundheitsforschung Gesundheitsschutz}}, number = {{6-7}}, pages = {{875--884}}, title = {{{[The DONALD cohort. An updated overview on 25 years of research based on the Dortmund Nutritional and Anthropometric Longitudinally Designed study].}}}, doi = {{10.1007/s00103-012-1503-6}}, volume = {{55}}, year = {{2012}}, } @article{27983, author = {{Labayen, I and Ruiz, JR and Ortega, FB and Gottrand, F and Huybrechts, I and Dallongeville, J and Widhalm, K and Ferrari, M and Buyken, Anette and Kersting, M and Moschonis, G and Turck, D and Gómez, S and Sjostrom, M and Meirhaeghe, A and Moreno, LA}}, issn = {{0007-1145}}, journal = {{Br J Nutr}}, number = {{10}}, pages = {{1498--1504}}, title = {{{Body size at birth modifies the effect of fat mass and obesity associated (FTO) rs9939609 polymorphism on adiposity in adolescents: the Healthy Lifestyle in Europe by Nutrition in Adolescence (HELENA) study.}}}, doi = {{10.1017/s0007114511004600}}, volume = {{107}}, year = {{2012}}, } @article{27986, author = {{Standl, M and Lattka, E and Stach, B and Koletzko, S and Bauer, CP and von Berg, A and Berdel, D and Krämer, U and Schaaf, B and Röder, S and Herbarth, O and Buyken, Anette and Drogies, T and Thiery, J and Koletzko, B and Heinrich, J and Study Group, GINIplus and Study Group, LISAplus}}, issn = {{1932-6203}}, journal = {{PLoS One}}, number = {{5}}, pages = {{e37780}}, title = {{{FADS1 FADS2 gene cluster, PUFA intake and blood lipids in children: results from the GINIplus and LISAplus studies.}}}, doi = {{10.1371/journal.pone.0037780}}, volume = {{7}}, year = {{2012}}, } @phdthesis{28214, author = {{Delius, R.}}, isbn = {{978-3-942647-22-9}}, publisher = {{Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn}}, title = {{{Sicherstellen der Abrufe bei Automotive-Zulieferern mit minimalen Kosten unter besonderer Berücksichtigung von Liquiditäts-, Beschäftigungs-, Knowhow- und IT-Restriktionen}}}, volume = {{303}}, year = {{2012}}, } @inproceedings{28575, abstract = {{When designing complex mechatronic systems, a team of developers will be facing many challenges that can impede progress and innovation if not tackled properly. In meeting them simulation tools play a central role. Yet it is often impossible for a single developer to foresee the overall impact a design decision will have on the system and on the other domains involved. For this task multi-domain simulation tools exists, but because of its complexity and the different levels of detail that are needed, the effort to specify a complete system from scratch is very high. Another challenge is the selection of the most suitable solution elements provided by the manufacturers. Currently they are often chosen manually from catalogues. The development engineer is therefore usually inclined to employ well-known solution elements and suppliers. To tackle both challenges our aim is an increase in efficiency and innovation by means of generally available solution knowledge, such as well-proven solution patterns, ready-to-use solution elements, and established simulation models [1]. Our paper presents a tool-supported, sequential design process. From the outset, the comprehensive functional capability of the designed system is supervised by means of multi-domain simulation. At significant points in the design process, solution knowledge can be accessed as it is stored in ontologies and therefore available via Semantic Web [2]. Thus, one can overcome barriers resulting from different terminologies or referential systems and furthermore infer further knowledge from the stored knowledge. The paper focuses on an early testing in the conceptual design stage and on the subsequent semantic search for suitable solution elements. After the specification of a principle solution for the mechatronic system by combining solution patterns, an initial multi-domain model of the system is created. This is done on the basis of the active structure and of idealized simulation models which are part of a free library and associated with the chosen solution patterns via the ontologies. In further designing the controlled system and its parameters with the completed model, the developer defines additional criteria to be fed into the subsequent semantic search for solution elements. Information on the latter is provided by the manufacturers as well as detailed simulation models, which are used to analyze the functional capability of the concretized system. Therefore, the corresponding idealized models are replaced automatically with the parameterized models of the solution elements containing for example the specific friction model for the chosen motor. We show this process using the concrete example of a dough-production system. In particular, we focus on its transport system. Resulting requirements for the simulation models and their level of detail are expound, as well as the architecture and benefits of the ontologies. [1] Bauer, F., Anacker, H., Gaukstern, T., Gausemeier, J., Just, V., (2011), “Analyzing the dynamic behavior of mechatronic systems within the conceptual design”, Proceedings of the 18th International Conference on Engineering Design (ICED11), 4, Copenhagen, pp. 329-336. [2] Berners-Lee, T., Hendler, J.; Lassila, O., (2001), “The Semantic Web”, Scientific American, 284(5), pp. 34–43. }}, author = {{Oesters{\"o}tebier, Felix and Just, Viktor and Tr{\"a}chtler, Ansgar and Bauer, Frank and Dziwok, Stefan}}, booktitle = {{Proceedings of the ASME 2012 11th Biennial Conference on Engineering Systems Design and Analysis}}, pages = {{647----656}}, publisher = {{ASME}}, title = {{{Model-Based Design of Mechatronic Systems by Means of Semantic Web Ontologies and Reusable Solution Element}}}, year = {{2012}}, }