@phdthesis{21183, abstract = {{Die präzise Kenntnis der Eigenschaften verwendeter Materialien hat große Bedeutung für den Entwurf technischer Systeme aller Art, aber auch für die Überwachung solcher Systeme im Betrieb. Für verschiedene physikalische Eigenschaften, Betriebsbedingungen und Materialklassen werden daher geeignete messtechnische Verfahren zur Materialcharakterisierung benötigt. In der vorliegenden Arbeit wird ein Verfahren zur ultraschallbasierten Charakterisierung der mechanischen Eigenschaften von homogenen und faserverstärkten thermoplastischen Polymeren unter Berücksichtigung der Richtungsabhängigkeit vorgestellt. Plattenförmige Probekörper werden dazu mittels Laser-Pulsen hoher Energie breitbandig angeregt und die resultierenden akustischen Lamb-Wellen aufgezeichnet. Auf Basis der dispersiven Eigenschaften der detektierten Wellenleitermoden werden in einem inversen Verfahren die Parameter eines linear-elastischen Materialmodells identifiziert. Darüber hinaus wird ein Verfahren zur vollständigen Charakterisierung der Richtungsabhängigkeit in orthotropen Materialien wie Faserverbundwerkstoffen unter Verwendung eines zweidimensionalen Simulationsmodells vorgestellt. Das Messverfahren wird anhand einer Untersuchungsreihe an künstlich gealterten Polymer- und Faserverbundwerkstoffen verifiziert und die Übertragbarkeit der Ergebnisse auf den quasistatischen Fall betrachtet. Im Vergleich mit den Ergebnissen mechanischer Zugversuche werden die Voraussetzungen und Einschränkungen, insbesondere durch die Annahme eines ideal-elastischen Materialmodells, diskutiert.}}, author = {{Webersen, Manuel}}, publisher = {{Universitätsbibliothek Paderborn}}, title = {{{Zerstörungsfreie Charakterisierung der elastischen Materialeigenschaften thermoplastischer Polymerwerkstoffe mittels Ultraschall}}}, doi = {{10.17619/UNIPB/1-1088}}, year = {{2021}}, } @article{21264, abstract = {{Abstract Background Hand amputation can have a truly debilitating impact on the life of the affected person. A multifunctional myoelectric prosthesis controlled using pattern classification can be used to restore some of the lost motor abilities. However, learning to control an advanced prosthesis can be a challenging task, but virtual and augmented reality (AR) provide means to create an engaging and motivating training. Methods In this study, we present a novel training framework that integrates virtual elements within a real scene (AR) while allowing the view from the first-person perspective. The framework was evaluated in 13 able-bodied subjects and a limb-deficient person divided into intervention (IG) and control (CG) groups. The IG received training by performing simulated clothespin task and both groups conducted a pre- and posttest with a real prosthesis. When training with the AR, the subjects received visual feedback on the generated grasping force. The main outcome measure was the number of pins that were successfully transferred within 20 min (task duration), while the number of dropped and broken pins were also registered. The participants were asked to score the difficulty of the real task (posttest), fun-factor and motivation, as well as the utility of the feedback. Results The performance (median/interquartile range) consistently increased during the training sessions (4/3 to 22/4). While the results were similar for the two groups in the pretest, the performance improved in the posttest only in IG. In addition, the subjects in IG transferred significantly more pins (28/10.5 versus 14.5/11), and dropped (1/2.5 versus 3.5/2) and broke (5/3.8 versus 14.5/9) significantly fewer pins in the posttest compared to CG. The participants in IG assigned (mean ± std) significantly lower scores to the difficulty compared to CG (5.2 ± 1.9 versus 7.1 ± 0.9), and they highly rated the fun factor (8.7 ± 1.3) and usefulness of feedback (8.5 ± 1.7). Conclusion The results demonstrated that the proposed AR system allows for the transfer of skills from the simulated to the real task while providing a positive user experience. The present study demonstrates the effectiveness and flexibility of the proposed AR framework. Importantly, the developed system is open source and available for download and further development. }}, author = {{Boschmann, Alexander and Neuhaus, Dorothee and Vogt, Sarah and Kaltschmidt, Christian and Platzner, Marco and Dosen, Strahinja}}, issn = {{1743-0003}}, journal = {{Journal of NeuroEngineering and Rehabilitation}}, title = {{{Immersive augmented reality system for the training of pattern classification control with a myoelectric prosthesis}}}, doi = {{10.1186/s12984-021-00822-6}}, year = {{2021}}, } @misc{21564, author = {{Itner, Dominik and Gravenkamp, Hauke and Dreiling, Dmitrij and Feldmann, Nadine and Henning, Bernd}}, title = {{{On the forward simulation and cost functions for the ultrasonic material characterization of polymers }}}, year = {{2021}}, } @article{23612, author = {{Zhang, Yong and Lewis, Nicholas H. C. and Mars, Julian and Wan, Gang and Weadock, Nicholas J. and Takacs, Christopher J. and Lukatskaya, Maria R. and Steinrück, Hans-Georg and Toney, Michael F. and Tokmakoff, Andrei and Maginn, Edward J.}}, issn = {{1520-6106}}, journal = {{The Journal of Physical Chemistry B}}, pages = {{4501--4513}}, title = {{{Water-in-Salt LiTFSI Aqueous Electrolytes. 1. Liquid Structure from Combined Molecular Dynamics Simulation and Experimental Studies}}}, doi = {{10.1021/acs.jpcb.1c02189}}, volume = {{125}}, year = {{2021}}, } @article{22206, abstract = {{AbstractWe consider tracking control for multibody systems which are modeled using holonomic and non-holonomic constraints. Furthermore, the systems may be underactuated and contain kinematic loops and are thus described by a set of differential-algebraic equations that cannot be reformulated as ordinary differential equations in general. We propose a control strategy which combines a feedforward controller based on the servo-constraints approach with a feedback controller based on a recent funnel control design. As an important tool for both approaches, we present a new procedure to derive the internal dynamics of a multibody system. Furthermore, we present a feasible set of coordinates for the internal dynamics avoiding the effort involved with the computation of the Byrnes–Isidori form. The control design is demonstrated by a simulation for a nonlinear non-minimum phase multi-input, multi-output robotic manipulator with kinematic loop.}}, author = {{Berger, Thomas and Drücker, Svenja and Lanza, Lukas Johannes and Reis, Timo and Seifried, Robert}}, issn = {{0924-090X}}, journal = {{Nonlinear Dynamics}}, title = {{{Tracking control for underactuated non-minimum phase multibody systems}}}, doi = {{10.1007/s11071-021-06458-4}}, year = {{2021}}, } @inproceedings{22460, author = {{Bothe, Mike and Lutters, Nicole and Kenig, Eugeny}}, location = {{online-Konferenz (Leipzig)}}, publisher = {{Jahrestreffen der ProcessNet-Fachgruppen Fluidverfahrenstechnik und Wärme- und Stoffübertragung}}, title = {{{Dynamische Simulation von Gefahrensituationen bei industriellen Kreislaufprozessen am Beispiel der chemischen Absorption}}}, year = {{2021}}, } @article{22511, abstract = {{In this paper, we reconsider the well-known discrete, round-based Go-To-The-Center algorithm due to Ando, Suzuki, and Yamashita [2] for gathering n autonomous mobile robots with limited viewing range in the plane. Remarquably, this algorithm exploits the fact that during its execution, many collisions of robots occur. Such collisions are interpreted as a success because it is assumed that such collided robots behave the same from now on. This is acceptable under the assumption that each robot is represented by a single point. Otherwise, collisions should be avoided. In this paper, we consider a continuous Go-To-The-Center algorithm in which the robots continuously observe the positions of their neighbors and adapt their speed (assuming a speed limit) and direction. Our first results are time bounds of O(n2) for gathering in two dimensions Euclidean space, and Θ(n) for the one dimension. Our main contribution is the introduction and evaluation of a continuous algorithm which performs Go-To-The-Center considering only the neighbors of a robot with respect to the Gabriel subgraph of the visibility graph, i.e. Go-To-The-Gabriel-Center algorithm. We show that this modification still correctly executes gathering in one and two dimensions, with the same time bounds as above. Simulations exhibit a severe difference of the behavior of the Go-To-The-Center and the Go-To-The-Gabriel-Center algorithms: Whereas lots of collisions occur during a run of the Go-To-The-Center algorithm, typically only one, namely the final collision occurs during a run of the Go-To-The-Gabriel-Center algorithm. We can prove this “collisionless property” of the Go-To-The-Gabriel-Center algorithm for one dimension. In two-dimensional Euclidean space, we conjecture that the “collisionless property” holds for almost every initial configuration. We support our conjecture with measurements obtained from the simulation where robots execute both continuous Go-To-The-Center and Go-To-The-Gabriel-Center algorithms. }}, author = {{Li, Shouwei and Meyer auf der Heide, Friedhelm and Podlipyan, Pavel}}, issn = {{0304-3975}}, journal = {{Theoretical Computer Science}}, keywords = {{Local algorithms, Distributed algorithms, Collisionless gathering, Mobile robots, Multiagent system}}, pages = {{29--40}}, title = {{{The impact of the Gabriel subgraph of the visibility graph on the gathering of mobile autonomous robots}}}, doi = {{10.1016/j.tcs.2020.11.009}}, volume = {{852}}, year = {{2021}}, } @article{22637, abstract = {{Abstract Doxorubicin (DOX) is a common drug in cancer chemotherapy, and its high DNA-binding affinity can be harnessed in preparing DOX-loaded DNA nanostructures for targeted delivery and therapeutics. Although DOX has been widely studied, the existing literature of DOX-loaded DNA-carriers remains limited and incoherent. Here, based on an in-depth spectroscopic analysis, we characterize and optimize the DOX loading into different 2D and 3D scaffolded DNA origami nanostructures (DONs). In our experimental conditions, all DONs show similar DOX binding capacities (one DOX molecule per two to three base pairs), and the binding equilibrium is reached within seconds, remarkably faster than previously acknowledged. To characterize drug release profiles, DON degradation and DOX release from the complexes upon DNase I digestion was studied. For the employed DONs, the relative doses (DOX molecules released per unit time) may vary by two orders of magnitude depending on the DON superstructure. In addition, we identify DOX aggregation mechanisms and spectral changes linked to pH, magnesium, and DOX concentration. These features have been largely ignored in experimenting with DNA nanostructures, but are probably the major sources of the incoherence of the experimental results so far. Therefore, we believe this work can act as a guide to tailoring the release profiles and developing better drug delivery systems based on DNA-carriers.}}, author = {{Ijäs, Heini and Shen, Boxuan and Heuer-Jungemann, Amelie and Keller, Adrian and Kostiainen, Mauri A and Liedl, Tim and Ihalainen, Janne A and Linko, Veikko}}, issn = {{0305-1048}}, journal = {{Nucleic Acids Research}}, pages = {{3048--3062}}, title = {{{Unraveling the interaction between doxorubicin and DNA origami nanostructures for customizable chemotherapeutic drug release}}}, doi = {{10.1093/nar/gkab097}}, volume = {{49}}, year = {{2021}}, } @unpublished{22807, abstract = {{Photonic quantum technologies [1] with applications in quantum communication, sensing as well as quantum simulation and computing, are on the verge of becoming commercially available. One crucial building block are tailored nanoscale integratable quantum light sources, matching the specific needs of use-cases. Several different approaches to realize solid-state quantum emitters [2] with high performance [3] have been pursued. However, the properties of the emitted single photons are always defined by the individual quantum light source and despite numerous quantum emitter tuning techniques [4-7], scalability is still a major challenge. Here we show an emitter-independent method to tailor and control the properties of the single photon emission. We demonstrate a laser-controlled down-conversion process from an excited state of a quantum three-level system [8]. Starting from a biexciton state, a tunable control laser field defines a virtual state in a stimulated process. From there, spontaneous emission to the ground state leads to optically controlled single photon emission. Based on this concept, we demonstrate energy tuning of the single photon emission with a control laser field. The nature of the involved quantum states furthermore provides a unique basis for the future control of polarization and bandwidth, as predicted by theory [9,10]. Our demonstration marks an important step towards tailored single photon emission from a photonic quantum system based on quantum optical principles.}}, author = {{Jonas, B. and Heinze, D. and Schöll, E. and Kallert, P. and Langer, T. and Krehs, S. and Widhalm, A. and Jöns, K. D. and Reuter, D. and Schumacher, S. and Zrenner, Artur}}, booktitle = {{arXiv:2105.12393}}, title = {{{Nonlinear down-conversion in a single quantum dot}}}, year = {{2021}}, } @inproceedings{22927, author = {{Derrick, John and Doherty, Simon and Dongol, Brijesh and Schellhorn, Gerhard and Wehrheim, Heike}}, booktitle = {{Proceedings of the 35th International Symposium on Distributed Computing (DISC)}}, publisher = {{Schloß Dagstuhl}}, title = {{{On Strong Observational Refinement and Forward Simulation}}}, year = {{2021}}, } @article{23023, abstract = {{DNA origami nanostructures (DONs) are promising substrates for the single-molecule investigation of biomolecular reactions and dynamics by in situ atomic force microscopy (AFM). For this, they are typically immobilized on mica substrates by adding millimolar concentrations of Mg2+ ions to the sample solution, which enable the adsorption of the negatively charged DONs at the like-charged mica surface. These non-physiological Mg2+ concentrations, however, present a serious limitation in such experiments as they may interfere with the reactions and processes under investigation. Therefore, we here evaluate three approaches to efficiently immobilize DONs at mica surfaces under essentially Mg2+-free conditions. These approaches rely on the pre-adsorption of different multivalent cations, i.e., Ni2+, poly-l-lysine (PLL), and spermidine (Spdn). DON adsorption is studied in phosphate-buffered saline (PBS) and pure water. In general, Ni2+ shows the worst performance with heavily deformed DONs. For 2D DON triangles, adsorption at PLL- and in particular Spdn-modified mica may outperform even Mg2+-mediated adsorption in terms of surface coverage, depending on the employed solution. For 3D six-helix bundles, less pronounced differences between the individual strategies are observed. Our results provide some general guidance for the immobilization of DONs at mica surfaces under Mg2+-free conditions and may aid future in situ AFM studies.}}, author = {{Xin, Yang and Zargariantabrizi, Amir Ardalan and Grundmeier, Guido and Keller, Adrian}}, issn = {{1420-3049}}, journal = {{Molecules}}, pages = {{4798}}, title = {{{Magnesium-Free Immobilization of DNA Origami Nanostructures at Mica Surfaces for Atomic Force Microscopy}}}, doi = {{10.3390/molecules26164798}}, volume = {{26}}, year = {{2021}}, } @article{21679, abstract = {{Three-dimensional modelling enables to determine the in-plane material flow in asymmetrical situation. Thus, the distortion of the sheets to be joined can be characterized more exactly. This study shows a method for building up a three-dimensional shear-clinching framework without damage criteria. In fact, the die-sided sheet in shear-clinching was designed as a pre-punched sheet and slugs. The material separation in the die-sided joining partner, which in two-dimensional simulation is often described by macro- and micromechanical fracture criteria, was realised in this study based on a defined contact condition. By means of a shear-cutting simulation, a correlation between the break angle and the separation stress was determined, which was used as a separation criterion in the shear-clinching simulation. The separation line was confirmed using post-particles. To validate this model, the results of the simulation using a quadratic single-point specimen were compared to the experiments with respect to the distortion of the joining partner. In general, the built three-dimensional framework provides for further tool developments with regard to the reduction of distortion in shear-clinching.}}, author = {{Han, Daxin and Yang, Chen and Meschut, Gerson}}, journal = {{ESAFORM 2021}}, title = {{{A method for three-dimensional modelling of the shear-clinching process}}}, doi = {{10.25518/esaform21.1948}}, year = {{2021}}, } @inproceedings{22013, author = {{Zeipert, Henning and Claes, Leander and Johannesmann, Sarah and Webersen, Manuel and Lugovtsova, Yevgeniya and Prager, Jens and Henning, Bernd}}, location = {{Nürnberg}}, pages = {{91 -- 92}}, title = {{{Measurement and Simulation of Lamb Waves in Adhesive-bonded Multilayer Systems}}}, doi = {{10.5162/SMSI2021/A8.2}}, year = {{2021}}, } @inproceedings{29849, abstract = {{DC-DC converters for on-board chargers (OBC) of electrical vehicles are usually galvanically isolated allowing modular single-phase PFC front-end solutions, but require transformers which are more bulky, costly and lossy than inductors of non-isolated DC-DCs. Furthermore, for vehicle-to-grid applications, bidirectional converters with transformers are generally more complex and have a higher count on semiconductor switches than transformerless solutions. However, when using non-isolated DC-DC converters within an OBC, the large common-mode (CM) capacitance comprising capacitive parasitics of the traction battery as well as explicit Y-capacitors connecting the high-voltage DC-system (HV-system) within specific HV-loads to ground has to be considered. For the PFC front-end stage, when supplied from the three-phase mains this means that generation of high-frequency and high-amplitude CM voltages, as it is common e.g. with the conventional six-switch full-bridge converter, has to be strictly avoided. For this reason, a modified topology is suggested leading to a different mode of operation and to a very low common-mode noise behaviour: The three-phase four-wire full-bridge PFC with split DC-link, whose midpoint is connected to the mains neutral provides very stable potentials at the DC-link rails and therefore it can be classified as Zero-CM-topology.For dedicated single-phase operation, as required for most OBC, an additional balancing leg may be added to the topology to reduce the required DC-link capacitance and allow non-electrolytic capacitors.The function of the bidirectional Zero-CM three-phase four-wire full-bridge PFC was verified by simulation and on an 11 kW-laboratory sample. The power factor is above 0.999 and an efficiency of 98 % is measured.}}, author = {{Strothmann, Benjamin and Schafmeister, Frank and Böcker, Joachim}}, booktitle = {{2021 IEEE Applied Power Electronics Conference and Exposition (APEC)}}, keywords = {{Three-phase four-wire, OBC, Y2G, PFC, CM, EY charger, balancing circuit}}, publisher = {{IEEE}}, title = {{{Common-Mode-Free Bidirectional Three-Phase PFC-Rectifier for Non-Isolated EV Charger}}}, doi = {{10.1109/apec42165.2021.9487462}}, year = {{2021}}, } @article{22162, author = {{Book, Gerrit and Traue, Arne and Balakrishna, Praneeth and Brosch, Anian and Schenke, Maximilian and Hanke, Sören and Kirchgässner, Wilhelm and Wallscheid, Oliver}}, issn = {{2644-1314}}, journal = {{IEEE Open Journal of Power Electronics}}, pages = {{187--201}}, title = {{{Transferring Online Reinforcement Learning for Electric Motor Control From Simulation to Real-World Experiments}}}, doi = {{10.1109/ojpel.2021.3065877}}, year = {{2021}}, } @inproceedings{29871, abstract = {{LLC resonant converters typically employ power MOSFETs in their inverter stage. The generally weak reverse recovery behaviour of the intrinsic body diodes of those MOSFETs causes significant turn-on losses when being forced to hard commutations. Continuous operation in this way will lead to self-destruction of the transistors. Consequently, zero-voltage switching (ZVS) is essential in a MOSFET-based inverter stage. To ensure ZVS, the LLC converter is operated in the inductive region. On the contrary, IGBTs show dominant turn-off losses and are therefore conventionally not applied in LLC converters typically requiring high switching frequencies to achieve low output voltages. However, if the LLC converter is intentionally designed for capacitive operation, zero-current switching (ZCS) is enabled and thus robust and cost-efficient IGBTs can be applied in the inverter stage. The aim of this work is to investigate the use IGBTs in the inverter of an LLC converter. The theory behind the capacitive operated LLC is derived using a switched simulation model and compared with the fundamental harmonic approximation (FHA). The results prove FHA to be useless for practical converter design. Instead, a stress value analysis based on switched model simulations is proposed to the design a capacitive operated LLC utilizing ZCS. A 2 kW prototype for on-board EV applications was built to verify the theory and design approach. The prototype confirms the derived theory and thus the deployment of IGBTs in the inverter stage of LLC resonant converters. Synchronous rectification turns out to require a specific control solution, but if given the resulting efficiency in the most critical operation point exceeds the value of a MOSFET-based (inductive operated) LLC-design of an identical application. Therefore, this concept should be further developed.}}, author = {{Urbaneck, Daniel and Rehlaender, Philipp and Böcker, Joachim and Schafmeister, Frank}}, booktitle = {{2021 IEEE Applied Power Electronics Conference and Exposition (APEC)}}, location = {{Arizona}}, title = {{{LLC Converter in Capacitive Operation Utilizing ZCS for IGBTs – Theory, Concept and Verification of a 2 kW DC-DC Converter for EVs}}}, year = {{2021}}, } @article{21254, author = {{Balakrishna, Praneeth and Book, Gerrit and Kirchgässner, Wilhelm and Schenke, Maximilian and Traue, Arne and Wallscheid, Oliver}}, issn = {{2475-9066}}, journal = {{Journal of Open Source Software}}, title = {{{gym-electric-motor (GEM): A Python toolbox for the simulation of electric drive systems}}}, doi = {{10.21105/joss.02498}}, year = {{2021}}, } @article{30648, abstract = {{In clinching, the combinations of requirements, materials, component dimensions and tools influence the resulting joint geometry and the resulting bonding mechanisms. These in turn affect the property profile of the joint. For example, it is possible to use different tools to flexibly adapt clinching points to the respective required load regime. Clinching points dimensioned in this way can be geometrically similar, but have different mechanical stress states, which leads to different properties in terms of load-bearing behavior. Within the scope of this work, the clinching process with different tools in optimal and compromise design and its effect on the force and form-closure component, is investigated in a torsion test of the clinched connection. Clinched steel sheets with two thicknesses and joining directions are analyzed. Virtual experiments are carried out using finite element analyses (FEA) of the joining process and are followed by a springback simulation. Subsequently, the surface pressure between the two joining partners in the clinching points is calculated on the basis of the results from the FEA and the transmittable moment of the connection, as an indicator for the force-closure component, is determined. Finally, the experimental and simulated data are compared and discussed.}}, author = {{Steinfelder, C. and Kalich, J. and Brosius, A. and Füssel, U.}}, journal = {{IOP Conference Series: Materials Science and Engineering}}, pages = {{012003}}, title = {{{Numerical and experimental investigation of the transmission moment of clinching points}}}, doi = {{10.1088/1757-899x/1157/1/012003}}, volume = {{1157}}, year = {{2021}}, } @article{30906, abstract = {{Abstract Background Hand amputation can have a truly debilitating impact on the life of the affected person. A multifunctional myoelectric prosthesis controlled using pattern classification can be used to restore some of the lost motor abilities. However, learning to control an advanced prosthesis can be a challenging task, but virtual and augmented reality (AR) provide means to create an engaging and motivating training. Methods In this study, we present a novel training framework that integrates virtual elements within a real scene (AR) while allowing the view from the first-person perspective. The framework was evaluated in 13 able-bodied subjects and a limb-deficient person divided into intervention (IG) and control (CG) groups. The IG received training by performing simulated clothespin task and both groups conducted a pre- and posttest with a real prosthesis. When training with the AR, the subjects received visual feedback on the generated grasping force. The main outcome measure was the number of pins that were successfully transferred within 20 min (task duration), while the number of dropped and broken pins were also registered. The participants were asked to score the difficulty of the real task (posttest), fun-factor and motivation, as well as the utility of the feedback. Results The performance (median/interquartile range) consistently increased during the training sessions (4/3 to 22/4). While the results were similar for the two groups in the pretest, the performance improved in the posttest only in IG. In addition, the subjects in IG transferred significantly more pins (28/10.5 versus 14.5/11), and dropped (1/2.5 versus 3.5/2) and broke (5/3.8 versus 14.5/9) significantly fewer pins in the posttest compared to CG. The participants in IG assigned (mean ± std) significantly lower scores to the difficulty compared to CG (5.2 ± 1.9 versus 7.1 ± 0.9), and they highly rated the fun factor (8.7 ± 1.3) and usefulness of feedback (8.5 ± 1.7). Conclusion The results demonstrated that the proposed AR system allows for the transfer of skills from the simulated to the real task while providing a positive user experience. The present study demonstrates the effectiveness and flexibility of the proposed AR framework. Importantly, the developed system is open source and available for download and further development. }}, author = {{Boschmann, Alexander and Neuhaus, Dorothee and Vogt, Sarah and Kaltschmidt, Christian and Platzner, Marco and Dosen, Strahinja}}, issn = {{1743-0003}}, journal = {{Journal of NeuroEngineering and Rehabilitation}}, keywords = {{Health Informatics, Rehabilitation}}, number = {{1}}, publisher = {{Springer Science and Business Media LLC}}, title = {{{Immersive augmented reality system for the training of pattern classification control with a myoelectric prosthesis}}}, doi = {{10.1186/s12984-021-00822-6}}, volume = {{18}}, year = {{2021}}, } @article{25476, abstract = {{This study deals with the damage behavior of metallic materials by the application of different manufacturing processes and using different optical measurement methods to identify the crack initiation in the damage specimen. The study is intended to highlight the importance of considering manufacturing processes and optical measurement methods in a numerical simulation when analyzing the damage behavior of metallic materials. To describe the damage behavior of the material in the process chain simulations, it is important to calibrate the parameters of damage model more accurately. These parameters are determined using experimental investigation of desired damage specimens. In this regard, a selected damage specimen manufactured by different cutting processes is first experimentally and then numerically investigated. It is shown that the manufacturing process and the optical measurement methods influence the stress state analyzed in the numerical simulation.}}, author = {{Otroshi, Mortaza and Meschut, Gerson and Nesakumar, Aathavan}}, journal = {{Journal of Manufacturing Engineering}}, keywords = {{Damage behaviour, Stress triaxiality, Manufacturing process and Optical measurement}}, number = {{3}}, pages = {{70--76}}, title = {{{The influence of manufacturing processes and optical measurement methods on the damage behavior of HX340LAD micro-alloyed steels}}}, doi = {{https://doi.org/10.37255/jme.v16i3pp070-076}}, volume = {{16}}, year = {{2021}}, }