@article{63223,
  abstract     = {{<jats:title>Abstract</jats:title><jats:p>The quartz crystal microbalance with dissipation monitoring (QCM‐D) is routinely used to investigate structured samples. Here, a simulation technique is described, that predicts the shifts of frequency and half bandwidth, Δ<jats:italic>f<jats:sub>n</jats:sub></jats:italic> and ΔΓ<jats:italic><jats:sub>n</jats:sub></jats:italic>, of a quartz resonator operating on different overtone orders, <jats:italic>n</jats:italic>, induced by structured samples in contact with the resonator surface in liquid. The technique, abbreviated as FreqD‐LBM, solves the Stokes equation in the frequency domain. The solution provides the complex amplitude of the area‐averaged tangential stress at the resonator surface, from which Δ<jats:italic>f<jats:sub>n</jats:sub></jats:italic> and ΔΓ<jats:italic><jats:sub>n</jats:sub></jats:italic> are derived. Because the dynamical variables are complex amplitudes, the viscosity can be complex, as well. The technique naturally covers viscoelasticity. Limitations are linked to the grid resolution and to problems at large viscosity. Validation steps include viscoelastic films, rough surfaces, an oscillating cylinder in a viscous medium, and a free‐floating sphere above the resonator. Application examples are soft adsorbed particles, stiff adsorbed particles, and a large, immobile spherical cap above the resonator, which allows to study the high‐frequency properties of the material in the gap. FreqDLBM runs on an office PC and does not require expert knowledge of numerical techniques. It is accessible to an experimentalist.</jats:p>}},
  author       = {{Johannsmann, Diethelm and Häusner, Paul and Langhoff, Arne and Leppin, Christian and Reviakine, Ilya and Vanoppen, Viktor}},
  issn         = {{2513-0390}},
  journal      = {{Advanced Theory and Simulations}},
  number       = {{7}},
  publisher    = {{Wiley}},
  title        = {{{The Frequency‐Domain Lattice Boltzmann Method (FreqD‐LBM): A Versatile Tool to Predict the QCM Response Induced by Structured Samples}}},
  doi          = {{10.1002/adts.202401373}},
  volume       = {{8}},
  year         = {{2025}},
}

@phdthesis{62766,
  abstract     = {{raditional assessment formats in university-based EFL teacher education programs usually focus on cognitive dispositions rather than on the actual performance of pre-service EFL teachers in everyday teaching situations. This assessment gap is addressed in this thesis by developing and validating a role-play-based simulation (RobS) designed for the summative assessment of pre-service EFL teachers' feedback competence on writing. Drawing on theories from multiple disciplines, such as higher education, medical education, teacher education, educational psychology, and EFL-specific didactics, the RobS is developed as a performance-oriented assessment format. In the RobS, pre-service EFL teachers engage in a feedback conversation with trained actors who portray a standardized learner. Following an argument-based approach to validation, the extent to which the RobS can be considered valid is investigated. Data from multiple studies, focusing on aspects such as authenticity, fairness, reliability, and external validity, are presented. The discussion in the validity argument indicates that the RobS can elicit and assess the performative facet of feedback competence on writing with sufficient confidence. This work contributes a novel, empirically supported assessment framework to teacher education research. Moreover, it presents an approach to address the assessment gap, enabling pre-service EFL teachers to show how they provide feedback, rather than just tell their lecturers about it.}},
  author       = {{Janzen, Thomas}},
  publisher    = {{Logos Verlag}},
  title        = {{{Show, don’t tell - Developing and Validating a Role-Play-Based Simulation (RobS) for the Assessment of Pre-Service EFL Teachers’ Feedback Competence on Writing}}},
  doi          = {{https://doi.org/10.30819/5994}},
  year         = {{2025}},
}

@techreport{63209,
  abstract     = {{Die DFG-Projekte AddFeRo-PM (406108415) und AddFeRo-SR (465089065) untersuchten die Potenziale des LB-PBF/M-Verfahrens zur Herstellung von Rotoren für unterschiedliche elektrische Maschinen. Im interdisziplinären Ansatz wurden Materialentwicklung und mechanische sowie elektromagnetische Optimierung verbunden. Im Projekt „AddFeRo-PM“ wurde der Rotor einer permanentmagneterregten Synchron- maschine (PMSM) untersucht. FeSi erwies sich als geeignete Legierung, konnte aber wegen Spannungsrissen nur bis zu 3 % Siliziumanteil (kurz: FeSi3) verarbeitet werden. Mechanische und elektromagnetische Untersuchungen ermöglichten eine 3D-Optimierung der Rotorgeometrie und -struktur. Der Demonstrator wurde additiv gefertigt und zeigt Leicht-baupotenziale sowie reduzierte Drehmomentwelligkeit. Im Folgeprojekt „AddFeRo-SR“ kam eine Hochtemperatur-Bauraumheizung (HTBH) zum Einsatz, die FeSi mit 6,5 % Siliziumanteil verarbeitbar machte, welches bessere elektro- magnetische Eigenschaften bietet. Sie wurde bei einer Synchron-Reluktanzmaschine (SynRM) getestet. Eine hybride Rotorfertigung erwies sich jedoch aufgrund von HTBH-Einschränkungen als ungeeignet, weshalb eine einteilige Fertigung mit FeSi3 umgesetzt wurde. Experimente bestätigten vergleichbare Betriebsergebnisse zur konventionellen Fertigung bei reduzierter Rotormasse. Zusätzlich wurde eine Methodik entwickelt, um additive Verfahren als Ergänzung zur konventionellen Fertigung zu integrieren. Beide Projekte zeigen das Potenzial additiver Fertigung für Leichtbau und Wirkungsgradsteigerung im Elektromaschinenbau und bieten wertvolle Grundlagen für industrielle Anwendungen.}},
  author       = {{Haase, Michael and Behrendt, Marius and Hengsbach, Florian and Kunnathully Sathees Kumar, Vinay and Magerkohl, Sebastian and Magyar, Balázs and Ponick, Bernd and Schaper, Mirko and Zimmer, Detmar}},
  keywords     = {{Additive Fertigung, Elektromotor, Leichtbau, Synchronmotor, DFG}},
  publisher    = {{Technische Informationsbibliothek}},
  title        = {{{Additive Fertigung im Elektromaschinenbau: Erforschung von Potentialen der additiven Fertigung in Rotoren permanentmagneterregter Synchronmaschinen}}},
  doi          = {{10.34657/26753}},
  year         = {{2025}},
}

@article{63534,
  abstract     = {{<jats:p>Boson sampling is a key candidate for demonstrating quantum advantage and has already yielded significant advances in quantum simulation, machine learning, and graph theory. In this work, a unification and extension of distinct forms of boson sampling is developed. The devised protocol merges discrete-variable scattershot boson sampling with continuous-variable Gaussian boson sampling. Therefore, it is rendered possible to harness the complexity of more interesting states, such as squeezed photons, in advanced sampling protocols. A generating function formalism is developed for the joint description of multiphoton and multimode light undergoing Gaussian transformations. The resulting analytical tools enable one to explore interfaces of different photonic quantum-information-processing platforms. A numerical simulation of unified sampling is carried out, benchmarking its performance, complexity, and scalability. Entanglement is characterized to exemplify the generation of quantum correlations from the nonlinear interactions of a unified sampler.</jats:p>}},
  author       = {{Bianchi, Luca and Marconi, Carlo and Ares, Laura and Bacco, Davide and Sperling, Jan}},
  issn         = {{2643-1564}},
  journal      = {{Physical Review Research}},
  number       = {{4}},
  publisher    = {{American Physical Society (APS)}},
  title        = {{{Unified boson sampling}}},
  doi          = {{10.1103/8hy1-m5gg}},
  volume       = {{7}},
  year         = {{2025}},
}

@article{58650,
  abstract     = {{Technical systems are characterized by increasing interdisciplinarity, complexity and networking. A product and its corresponding production systems require interdisciplinary multi-objective optimization. Sustainability and recyclability demands increase said complexity. The efficiency of previously established engineering methods is reaching its limits, which can only be overcome by systematic integration of extreme data. The aim of "hybrid decision support" is as follows: Data science and artificial intelligence should be used to supplement human capabilities in conjunction with existing heuristics, methods, modeling and simulation to increase the efficiency of product creation.}},
  author       = {{Gräßler, Iris and Pottebaum, Jens and Nyhuis, Peter and Stark, Rainer and Thoben, Klaus-Dieter and Wiederkehr, Petra}},
  issn         = {{2942-6170}},
  journal      = {{Industry 4.0 Science}},
  keywords     = {{AI, artificial intelligence, Data Science, decision support, extreme data, Künstliche Intelligenz, product creation, product development}},
  number       = {{1}},
  publisher    = {{GITO mbH Verlag}},
  title        = {{{Hybrid Decision Support in Product Creation - Improving performance with data science and artificial intelligence}}},
  doi          = {{10.30844/i4sd.25.1.18}},
  volume       = {{2025}},
  year         = {{2025}},
}

@article{58811,
  abstract     = {{<jats:title>Abstract</jats:title>
          <jats:p>Fractional dissipation is a powerful tool to study nonlocal physical phenomena such as damping models. The design of geometric, in particular, variational integrators for the numerical simulation of such systems relies on a variational formulation of the model. In Jiménez and Ober-Blöbaum (J Nonlinear Sci 31:46, 2021), a new approach is proposed to deal with dissipative systems including fractionally damped systems in a variational way for both, the continuous and discrete setting. It is based on the doubling of variables and their fractional derivatives. The aim of this work is to derive higher-order fractional variational integrators by means of convolution quadrature (CQ) based on backward difference formulas. We then provide numerical methods that are of order 2 improving a previous result in Jiménez and Ober-Blöbaum (J Nonlinear Sci 31:46, 2021). The convergence properties of the fractional variational integrators and saturation effects due to the approximation of the fractional derivatives by CQ are studied numerically.</jats:p>}},
  author       = {{Hariz Belgacem, Khaled and Jiménez, Fernando and Ober-Blöbaum, Sina}},
  issn         = {{0938-8974}},
  journal      = {{Journal of Nonlinear Science}},
  number       = {{2}},
  publisher    = {{Springer Science and Business Media LLC}},
  title        = {{{Fractional Variational Integrators Based on Convolution Quadrature}}},
  doi          = {{10.1007/s00332-025-10131-0}},
  volume       = {{35}},
  year         = {{2025}},
}

@article{58556,
  abstract     = {{To predict and prevent uneven tire wear in addition to a reduction of overall tire wear, it is essential to estimate not only the total amount of wear but also how the wear is distributed across the tire width. This requires knowledge of the frictional power distribution in the tire contact patch, which is the basis for calculating tire wear using a wear law. Usually, only 3D structural tire models can generate such distributed contact results. However, they involve high computational costs and cannot be used for comprehensive optimization of a vehicle’s suspension system with respect to tire wear characteristics. Hence, this contribution presents a methodology on how to accelerate the prediction of the frictional power distribution using two components: The structural tire model is replaced by an empirical tire model that on its own is not able to generate distributed contact results. Therefore, an artificial neural network is trained to predict the desired contact results from the kinematic quantities calculated by the empirical tire model. In the initial training phase, both components are fitted to data generated by the original complex tire model. After training, the empirical tire model can replace the structural tire model in vehicle simulations, resulting in significantly shorter calculation times. The simulation results are fed into the artificial neural network, which predicts the frictional power distributions over the tire width with negligible additional effort. Overall, the methodology reduces calculation time for the prediction of tire wear based on virtual test drives to approximately 25% of the time needed when using structural tire models.}},
  author       = {{Muth, Lars and Zharia, Raphael and Sahin, Hürkan and Sextro, Walter}},
  journal      = {{Tire Science and Technology}},
  publisher    = {{The Tire Society}},
  title        = {{{Prediction of the Frictional Power Distribution in the Tire Contact Patch Based on an Empirical Tire Model and an Artificial Neural Network}}},
  doi          = {{https://doi.org/10.2346/TST-24-009}},
  year         = {{2025}},
}

@article{59229,
  abstract     = {{<jats:p>Die Nahrungszubereitung als zentraler Bestandteil eines haushaltsbezogenen Unterrichts dient der Anbahnung von Kompetenzen für die Zubereitung von Speisen und die Gestaltung von Mahlzeiten unter Berücksichtigung von Gesundheit und Nachhaltigkeit. Ebenso bedeutsam, jedoch häufig vernachlässigt, ist die Berücksichtigung unterschiedlicher Esskulturen, lebensweltlicher Erfahrungen und sozioökonomischer Hintergründe der Lernenden.</jats:p>}},
  author       = {{Schlegel-Matthies, Kirsten}},
  issn         = {{2193-8806}},
  journal      = {{HiBiFo – Haushalt in Bildung &amp; Forschung}},
  number       = {{1}},
  pages        = {{49--63}},
  publisher    = {{Verlag Barbara Budrich GmbH}},
  title        = {{{Essen in der Vielfalt – Esskultur und Nahrungszubereitung}}},
  doi          = {{10.3224/hibifo.v14i1.05}},
  volume       = {{14}},
  year         = {{2025}},
}

@phdthesis{59239,
  abstract     = {{Diese Arbeit behandelt die Modellierung und Optimierung von mit Phasenwechselmaterialien (PCM) ausgestatteten, energietechnischen Komponenten anhand zweier Fallstudien. PCM sind Materialien, deren Phasenwechseleigenschaften während des Schmelzens und Erstarrens für Heiz- und Kühlzwecke genutzt werden. Zunächst werden die theoretischen Grundlagen zu Wärmeübertragungsproblemen mit Phasenwechsel erörtert und entsprechende numerische Lösungsmethoden diskutiert. Ein Modell für Phasenwechselvorgänge wird vorgestellt, welches anhand analytischer Lösungen validiert wurde und in den Fallstudien zum Einsatz kam. Für beide Fallstudien wird der Stand der Technik erörtert und die entsprechenden Forschungsfragen werden formuliert. Die erste Fallstudie behandelt PCM-integrierte Photovoltaikmodule und die zweite Festbett-Latentwärmespeicher, welche nicht-kugelförmiger PCM-Kapseln verwenden. Für beide Systeme wurden thermische Model-le entwickelt und anhand experimenteller Daten mit guter Genauigkeit validiert. Diese Modelle wurden in Parameterstudien eingesetzt, um optimierte Systemkonfigurationen zu identifizieren. Die vorgestellten Ergebnisse zeigen, dass ein PCM-Kühlkörper mit ausreichender Dicke und Wärmeleitfähigkeit den Wirkungsgrad und die Lebensdauer von Photovoltaikmodulen erheblich erhöht. Darüber hinaus verbessern PCM-Kapseln mit hoher Packungs-dichte und Oberfläche sowohl die volumenspezifische Speicherkapazität als auch die thermische Leistung von Festbett-Latentwärmespeichern.}},
  author       = {{Grabo, Matti}},
  keywords     = {{Heat transfer, PCM, numerical simulation, renewable energy, heat storage}},
  title        = {{{Modeling and optimization of energy system components equipped with phase change materials}}},
  doi          = {{10.17619/UNIPB/1-2199}},
  year         = {{2025}},
}

@article{60186,
  author       = {{Lang, A and Schaefer, E and Kupriyanova, Y and Goletzke, J and Weber, KS and Buyken, Anette and Kahl, S and Zaharia, OP and Herder, C and Schrauwen-Hinderling, VB and Kuss, O and Wagner, R and Roden, M and Schlesinger, S and Diabetes Study Group, German}},
  issn         = {{1475-2891}},
  journal      = {{Nutr J}},
  number       = {{1}},
  pages        = {{74}},
  title        = {{{Cross-sectional association between the isocaloric replacement of carbohydrates with protein and fat in relation to fat compartments distribution and hepatic lipid content in recent-onset type 1 and type 2 diabetes.}}},
  volume       = {{24}},
  year         = {{2025}},
}

@article{60182,
  author       = {{Perrar, I and Hohoff, E and Lesani, A and Schmitting, S and Libuda, Lars and Krüger, Bettina and Stutz, Bianca and Nöthlings, U and Buyken, Anette and Alexy, U and Jankovic, N}},
  issn         = {{1436-6207}},
  journal      = {{Eur J Nutr}},
  number       = {{4}},
  pages        = {{165}},
  title        = {{{Circadian eating patterns track from infancy to pre- and primary school-age, but are not prospectively associated with body composition in childhood - Results of the DONALD cohort study.}}},
  volume       = {{64}},
  year         = {{2025}},
}

@article{60184,
  author       = {{Della Corte, KA and Bosler, T and McClure, C and Buyken, Anette and LeCheminant, JD and Schwingshackl, L and Della Corte, D}},
  issn         = {{2161-8313}},
  journal      = {{Adv Nutr}},
  number       = {{5}},
  pages        = {{100413}},
  title        = {{{Dietary Sugar Intake and Incident Type 2 Diabetes Risk: A Systematic Review and Dose-Response Meta-Analysis of Prospective Cohort Studies.}}},
  volume       = {{16}},
  year         = {{2025}},
}

@article{60187,
  author       = {{Revheim, I and Sabir, Z and Dierkes, J and Buyken, Anette and Landberg, R and Alten, I and Spielau, U and Rosendahl-Riise, H}},
  issn         = {{1436-6207}},
  journal      = {{Eur J Nutr}},
  number       = {{5}},
  pages        = {{197}},
  title        = {{{Bread, wholegrain consumption and weight change from middle to late adulthood: a prospective cohort study. }}},
  volume       = {{64}},
  year         = {{2025}},
}

@article{60181,
  author       = {{Dannheim, I and Ludwig-Walz, H and Kirsch, H and Bujard, M and Buyken, Anette and Richardson, KM and Kroke, A}},
  issn         = {{0355-3140}},
  journal      = {{Scand J Work Environ Health}},
  pages        = {{4219}},
  title        = {{{Effectiveness of leader-targeted stress management interventions: A systematic review and meta-analysis.}}},
  year         = {{2025}},
}

@article{60136,
  abstract     = {{<jats:p>Modulation conditioned on measurements on entangled photonic quantum states is a cornerstone technology of optical quantum information processing. Performing this task with low latency requires combining single-photon-level detectors with both electronic logic processing and optical modulation in close proximity. Here, we demonstrate low-latency feedforward using a quasi-photon-number-resolved measurement on a quantum light source. Specifically, we use a multipixel superconducting nanowire single-photon detector, amplifier, logic, and an integrated electro-optic modulator <jats:italic toggle="yes">in situ</jats:italic> below 4 K. We modulate the signal mode of a spontaneous parametric down-conversion source, conditional on a photon-number measurement of the idler mode, with a total latency of (23±3)ns. Furthermore, we investigate the resulting change in the photon statistics. This represents an important benchmark for the fastest quantum photonic feedforward experiments comprising measurement, amplification, logic, and modulation. This has direct applications in quantum computing, communication, and simulation protocols.</jats:p>}},
  author       = {{Thiele, Frederik and Lamberty, Niklas and Hummel, Thomas and Lange, Nina Amelie and Procopio Peña, Lorenzo Manuel and Barua, Aishi and Lengeling, Sebastian and Quiring, Viktor and Eigner, Christof and Silberhorn, Christine and Bartley, Tim}},
  issn         = {{2334-2536}},
  journal      = {{Optica}},
  number       = {{5}},
  publisher    = {{Optica Publishing Group}},
  title        = {{{Cryogenic feedforward of a photonic quantum state}}},
  doi          = {{10.1364/optica.551287}},
  volume       = {{12}},
  year         = {{2025}},
}

@article{60174,
  abstract     = {{<jats:p>Fähigkeiten zur Wahrnehmung und Regulation von Emotionen sind von besonderer Relevanz für Studierende, da Fördermaßnahmen im Bereich der Emotionsregulation auch positive Effekte auf die Studienqualität, den Studienerfolg und die allgemeine Persönlichkeitsentwicklung haben können. Jedoch wird diesem Thema wenig Aufmerksamkeit geschenkt und hochschuldidaktisch steht die Gestaltung von kognitiven und inhaltsbezogenen Lernarrangements im Zentrum. Die Einbindung von Gelegenheiten zur Emotionsreflexion in die Lehre bietet eine niederschwellige Maßnahme zur Förderung emotionaler Kompetenzen, weshalb im vorliegenden Beitrag ein Instrument zur Umsetzung dieser Aufgabe vorgeschlagen wird.</jats:p>}},
  author       = {{Lehberger, Regine}},
  issn         = {{2219-6994}},
  journal      = {{Zeitschrift für Hochschulentwicklung}},
  keywords     = {{Emotionsreflexion, Studierende, Hochschullehre, Reflexion}},
  number       = {{1}},
  publisher    = {{OAPublishing Collective}},
  title        = {{{Emotionsreflexion als Element universitären Lehrens und Lernens Emotional reflection as an element of university teaching and learning}}},
  doi          = {{10.21240/zfhe/20-1/22}},
  volume       = {{20}},
  year         = {{2025}},
}

@article{60299,
  abstract     = {{Non-rotationally symmetrical joints can have different properties that can be controlled by the joint orientation. This hypothesis is tested using a Reuleaux triangle joint geometry. A tool design is carried out, followed by a numerical sensitivity analysis of the tool geometry. Initial tools were manufactured for experimental investigations and then adapted based on the findings of the sensitivity analysis. The joints are characterized by micrographs, 3D scans, shear tensile tests, head tensile tests and three-point bending tests and compared with a round geometry. The analysis confirms the hypothesis. Thus, joints with adaptable properties can be produced with one tool set.}},
  author       = {{Steinfelder, Christian and Acksteiner, Clemens and Brosius, Alexander}},
  issn         = {{0007-8506}},
  journal      = {{CIRP Annals}},
  keywords     = {{Joining, Forming, Property adjustment}},
  publisher    = {{Elsevier BV}},
  title        = {{{A new joint with versatile properties based on a Reuleaux triangle geometry}}},
  doi          = {{10.1016/j.cirp.2025.03.002}},
  year         = {{2025}},
}

@misc{60336,
  author       = {{Schlegel-Matthies, Kirsten}},
  booktitle    = {{Haushalt in Bildung und Forschung}},
  issn         = {{2196-1662}},
  number       = {{1}},
  pages        = {{49--63}},
  title        = {{{Essen in der Vielfalt –   Esskultur und Nahrungszubereitung}}},
  volume       = {{14}},
  year         = {{2025}},
}

@article{60471,
  author       = {{Knoll-Pientka, N and Schils, D and Pasternak, K and Czarnetzky, S and Jansen, C and Gradl-Dietsch, G and Seitz, J and Skoda, EM and Libuda, Lars and Schweda, A and Teufel, M}},
  issn         = {{2050-2974}},
  journal      = {{J Eat Disord}},
  number       = {{1}},
  pages        = {{87}},
  title        = {{{Can bioelectrical impedance analysis be used to identify water loading in patients with anorexia nervosa?- Implications from experimental measurements in young, healthy, and normal weight women.}}},
  volume       = {{13}},
  year         = {{2025}},
}

@inproceedings{60494,
  abstract     = {{Pillow-plate heat exchangers (PPHEs) represent a viable alternative to conventional shell-and-tube and plate heat exchangers. The waviness of their channels intensifies fluid mixing in the boundary layers and facilitates heat transfer. Applying secondary surface structuring can further enhance the overall thermo-hydraulic performance of PPHEs, thus increasing their competitiveness against conventional heat exchangers. In this work, streamlined secondary structures applied on the PPHE surface were studied numerically to explore their potential in enhancing near-wall fluid mixing. Computational fluid dynamics (CFD) simulations of single-phase turbulent flow in the inner PPHE channel were performed and pressure drop, heat transfer coefficients, and overall thermo-hydraulic efficiency were determined. The simulation results clearly demonstrate a favourable influence of secondary structuring on the heat transfer performance of PPHEs.</jats:p>}},
  author       = {{Afsahnoudeh, Reza and Riese, Julia and Kenig, Eugeny Y.}},
  booktitle    = {{Systems and Control Transactions}},
  issn         = {{2818-4734}},
  publisher    = {{PSE Press}},
  title        = {{{Thermo-Hydraulic Performance of Pillow-Plate Heat Exchangers with Streamlined Secondary Structures: A Numerical Analysis}}},
  doi          = {{10.69997/sct.178665}},
  volume       = {{4}},
  year         = {{2025}},
}