[{"publication_status":"published","date_updated":"2025-12-18T17:46:34Z","article_type":"original","intvolume":"         8","year":"2025","title":"The Frequency‐Domain Lattice Boltzmann Method (FreqD‐LBM): A Versatile Tool to Predict the QCM Response Induced by Structured Samples","publication_identifier":{"issn":["2513-0390","2513-0390"]},"author":[{"first_name":"Diethelm","last_name":"Johannsmann","full_name":"Johannsmann, Diethelm"},{"full_name":"Häusner, Paul","first_name":"Paul","last_name":"Häusner"},{"first_name":"Arne","last_name":"Langhoff","full_name":"Langhoff, Arne"},{"id":"117722","last_name":"Leppin","first_name":"Christian","full_name":"Leppin, Christian"},{"first_name":"Ilya","last_name":"Reviakine","full_name":"Reviakine, Ilya"},{"full_name":"Vanoppen, Viktor","first_name":"Viktor","last_name":"Vanoppen"}],"doi":"10.1002/adts.202401373","article_number":"2401373","language":[{"iso":"eng"}],"abstract":[{"lang":"eng","text":"<jats:title>Abstract</jats:title><jats:p>The quartz crystal microbalance with dissipation monitoring (QCM‐D) is routinely used to investigate structured samples. Here, a simulation technique is described, that predicts the shifts of frequency and half bandwidth, Δ<jats:italic>f<jats:sub>n</jats:sub></jats:italic> and ΔΓ<jats:italic><jats:sub>n</jats:sub></jats:italic>, of a quartz resonator operating on different overtone orders, <jats:italic>n</jats:italic>, induced by structured samples in contact with the resonator surface in liquid. The technique, abbreviated as FreqD‐LBM, solves the Stokes equation in the frequency domain. The solution provides the complex amplitude of the area‐averaged tangential stress at the resonator surface, from which Δ<jats:italic>f<jats:sub>n</jats:sub></jats:italic> and ΔΓ<jats:italic><jats:sub>n</jats:sub></jats:italic> are derived. Because the dynamical variables are complex amplitudes, the viscosity can be complex, as well. The technique naturally covers viscoelasticity. Limitations are linked to the grid resolution and to problems at large viscosity. Validation steps include viscoelastic films, rough surfaces, an oscillating cylinder in a viscous medium, and a free‐floating sphere above the resonator. Application examples are soft adsorbed particles, stiff adsorbed particles, and a large, immobile spherical cap above the resonator, which allows to study the high‐frequency properties of the material in the gap. FreqDLBM runs on an office PC and does not require expert knowledge of numerical techniques. It is accessible to an experimentalist.</jats:p>"}],"issue":"7","publication":"Advanced Theory and Simulations","type":"journal_article","date_created":"2025-12-18T16:57:22Z","status":"public","user_id":"117722","volume":8,"publisher":"Wiley","_id":"63223","quality_controlled":"1","citation":{"ieee":"D. Johannsmann, P. Häusner, A. Langhoff, C. Leppin, I. Reviakine, and V. Vanoppen, “The Frequency‐Domain Lattice Boltzmann Method (FreqD‐LBM): A Versatile Tool to Predict the QCM Response Induced by Structured Samples,” <i>Advanced Theory and Simulations</i>, vol. 8, no. 7, Art. no. 2401373, 2025, doi: <a href=\"https://doi.org/10.1002/adts.202401373\">10.1002/adts.202401373</a>.","apa":"Johannsmann, D., Häusner, P., Langhoff, A., Leppin, C., Reviakine, I., &#38; Vanoppen, V. (2025). The Frequency‐Domain Lattice Boltzmann Method (FreqD‐LBM): A Versatile Tool to Predict the QCM Response Induced by Structured Samples. <i>Advanced Theory and Simulations</i>, <i>8</i>(7), Article 2401373. <a href=\"https://doi.org/10.1002/adts.202401373\">https://doi.org/10.1002/adts.202401373</a>","short":"D. Johannsmann, P. Häusner, A. Langhoff, C. Leppin, I. Reviakine, V. Vanoppen, Advanced Theory and Simulations 8 (2025).","chicago":"Johannsmann, Diethelm, Paul Häusner, Arne Langhoff, Christian Leppin, Ilya Reviakine, and Viktor Vanoppen. “The Frequency‐Domain Lattice Boltzmann Method (FreqD‐LBM): A Versatile Tool to Predict the QCM Response Induced by Structured Samples.” <i>Advanced Theory and Simulations</i> 8, no. 7 (2025). <a href=\"https://doi.org/10.1002/adts.202401373\">https://doi.org/10.1002/adts.202401373</a>.","mla":"Johannsmann, Diethelm, et al. “The Frequency‐Domain Lattice Boltzmann Method (FreqD‐LBM): A Versatile Tool to Predict the QCM Response Induced by Structured Samples.” <i>Advanced Theory and Simulations</i>, vol. 8, no. 7, 2401373, Wiley, 2025, doi:<a href=\"https://doi.org/10.1002/adts.202401373\">10.1002/adts.202401373</a>.","bibtex":"@article{Johannsmann_Häusner_Langhoff_Leppin_Reviakine_Vanoppen_2025, title={The Frequency‐Domain Lattice Boltzmann Method (FreqD‐LBM): A Versatile Tool to Predict the QCM Response Induced by Structured Samples}, volume={8}, DOI={<a href=\"https://doi.org/10.1002/adts.202401373\">10.1002/adts.202401373</a>}, number={72401373}, journal={Advanced Theory and Simulations}, publisher={Wiley}, author={Johannsmann, Diethelm and Häusner, Paul and Langhoff, Arne and Leppin, Christian and Reviakine, Ilya and Vanoppen, Viktor}, year={2025} }","ama":"Johannsmann D, Häusner P, Langhoff A, Leppin C, Reviakine I, Vanoppen V. The Frequency‐Domain Lattice Boltzmann Method (FreqD‐LBM): A Versatile Tool to Predict the QCM Response Induced by Structured Samples. <i>Advanced Theory and Simulations</i>. 2025;8(7). doi:<a href=\"https://doi.org/10.1002/adts.202401373\">10.1002/adts.202401373</a>"}},{"has_accepted_license":"1","status":"public","ddc":["370"],"user_id":"89329","publisher":"Logos Verlag","_id":"62766","file_date_updated":"2025-12-23T07:31:25Z","supervisor":[{"full_name":"Vogelsang, Christoph","first_name":"Christoph","last_name":"Vogelsang","orcid":"0000-0002-5804-1855","id":"4245"}],"citation":{"mla":"Janzen, Thomas. <i>Show, Don’t Tell - Developing and Validating a Role-Play-Based Simulation (RobS) for the Assessment of Pre-Service EFL Teachers’ Feedback Competence on Writing</i>. Logos Verlag, 2025, doi:<a href=\"https://doi.org/10.30819/5994\">https://doi.org/10.30819/5994</a>.","bibtex":"@book{Janzen_2025, place={Berlin}, title={Show, don’t tell - Developing and Validating a Role-Play-Based Simulation (RobS) for the Assessment of Pre-Service EFL Teachers’ Feedback Competence on Writing}, DOI={<a href=\"https://doi.org/10.30819/5994\">https://doi.org/10.30819/5994</a>}, publisher={Logos Verlag}, author={Janzen, Thomas}, year={2025} }","ama":"Janzen T. <i>Show, Don’t Tell - Developing and Validating a Role-Play-Based Simulation (RobS) for the Assessment of Pre-Service EFL Teachers’ Feedback Competence on Writing</i>. Logos Verlag; 2025. doi:<a href=\"https://doi.org/10.30819/5994\">https://doi.org/10.30819/5994</a>","ieee":"T. Janzen, <i>Show, don’t tell - Developing and Validating a Role-Play-Based Simulation (RobS) for the Assessment of Pre-Service EFL Teachers’ Feedback Competence on Writing</i>. Berlin: Logos Verlag, 2025.","apa":"Janzen, T. (2025). <i>Show, don’t tell - Developing and Validating a Role-Play-Based Simulation (RobS) for the Assessment of Pre-Service EFL Teachers’ Feedback Competence on Writing</i>. Logos Verlag. <a href=\"https://doi.org/10.30819/5994\">https://doi.org/10.30819/5994</a>","chicago":"Janzen, Thomas. <i>Show, Don’t Tell - Developing and Validating a Role-Play-Based Simulation (RobS) for the Assessment of Pre-Service EFL Teachers’ Feedback Competence on Writing</i>. Berlin: Logos Verlag, 2025. <a href=\"https://doi.org/10.30819/5994\">https://doi.org/10.30819/5994</a>.","short":"T. Janzen, Show, Don’t Tell - Developing and Validating a Role-Play-Based Simulation (RobS) for the Assessment of Pre-Service EFL Teachers’ Feedback Competence on Writing, Logos Verlag, Berlin, 2025."},"oa":"1","place":"Berlin","date_updated":"2025-12-23T07:33:22Z","publication_status":"published","title":"Show, don’t tell - Developing and Validating a Role-Play-Based Simulation (RobS) for the Assessment of Pre-Service EFL Teachers’ Feedback Competence on Writing","year":"2025","author":[{"id":"89329","first_name":"Thomas","orcid":"0009-0003-1941-166X","last_name":"Janzen","full_name":"Janzen, Thomas"}],"publication_identifier":{"unknown":[" 978-3-8325-5994-6"]},"doi":"https://doi.org/10.30819/5994","main_file_link":[{"url":"https://doi.org/10.30819/5994","open_access":"1"}],"language":[{"iso":"eng"}],"abstract":[{"lang":"eng","text":"raditional assessment formats in university-based EFL teacher education programs usually focus on cognitive dispositions rather than on the actual performance of pre-service EFL teachers in everyday teaching situations. This assessment gap is addressed in this thesis by developing and validating a role-play-based simulation (RobS) designed for the summative assessment of pre-service EFL teachers' feedback competence on writing. Drawing on theories from multiple disciplines, such as higher education, medical education, teacher education, educational psychology, and EFL-specific didactics, the RobS is developed as a performance-oriented assessment format. In the RobS, pre-service EFL teachers engage in a feedback conversation with trained actors who portray a standardized learner. Following an argument-based approach to validation, the extent to which the RobS can be considered valid is investigated. Data from multiple studies, focusing on aspects such as authenticity, fairness, reliability, and external validity, are presented. The discussion in the validity argument indicates that the RobS can elicit and assess the performative facet of feedback competence on writing with sufficient confidence. This work contributes a novel, empirically supported assessment framework to teacher education research. Moreover, it presents an approach to address the assessment gap, enabling pre-service EFL teachers to show how they provide feedback, rather than just tell their lecturers about it."}],"extern":"1","license":"https://creativecommons.org/licenses/by-sa/4.0/","type":"dissertation","file":[{"creator":"janzent","date_created":"2025-12-23T07:31:25Z","file_name":"Janzen, T. (2025).pdf","file_size":9551046,"access_level":"open_access","relation":"main_file","date_updated":"2025-12-23T07:31:25Z","file_id":"63404","content_type":"application/pdf"}],"date_created":"2025-12-03T11:11:44Z"},{"date_created":"2025-12-18T12:14:12Z","type":"report","keyword":["Additive Fertigung","Elektromotor","Leichtbau","Synchronmotor","DFG"],"department":[{"_id":"146"},{"_id":"158"}],"abstract":[{"lang":"ger","text":"Die DFG-Projekte AddFeRo-PM (406108415) und AddFeRo-SR (465089065) untersuchten die Potenziale des LB-PBF/M-Verfahrens zur Herstellung von Rotoren für unterschiedliche elektrische Maschinen. Im interdisziplinären Ansatz wurden Materialentwicklung und mechanische sowie elektromagnetische Optimierung verbunden. Im Projekt „AddFeRo-PM“ wurde der Rotor einer permanentmagneterregten Synchron- maschine (PMSM) untersucht. FeSi erwies sich als geeignete Legierung, konnte aber wegen Spannungsrissen nur bis zu 3 % Siliziumanteil (kurz: FeSi3) verarbeitet werden. Mechanische und elektromagnetische Untersuchungen ermöglichten eine 3D-Optimierung der Rotorgeometrie und -struktur. Der Demonstrator wurde additiv gefertigt und zeigt Leicht-baupotenziale sowie reduzierte Drehmomentwelligkeit. Im Folgeprojekt „AddFeRo-SR“ kam eine Hochtemperatur-Bauraumheizung (HTBH) zum Einsatz, die FeSi mit 6,5 % Siliziumanteil verarbeitbar machte, welches bessere elektro- magnetische Eigenschaften bietet. Sie wurde bei einer Synchron-Reluktanzmaschine (SynRM) getestet. Eine hybride Rotorfertigung erwies sich jedoch aufgrund von HTBH-Einschränkungen als ungeeignet, weshalb eine einteilige Fertigung mit FeSi3 umgesetzt wurde. Experimente bestätigten vergleichbare Betriebsergebnisse zur konventionellen Fertigung bei reduzierter Rotormasse. Zusätzlich wurde eine Methodik entwickelt, um additive Verfahren als Ergänzung zur konventionellen Fertigung zu integrieren. Beide Projekte zeigen das Potenzial additiver Fertigung für Leichtbau und Wirkungsgradsteigerung im Elektromaschinenbau und bieten wertvolle Grundlagen für industrielle Anwendungen."}],"main_file_link":[{"url":"https://oa.tib.eu/renate/bitstreams/9121e5bb-d113-4cfe-8fc6-610465afcd66/download","open_access":"1"}],"language":[{"iso":"ger"}],"doi":"10.34657/26753","year":"2025","title":"Additive Fertigung im Elektromaschinenbau: Erforschung von Potentialen der additiven Fertigung in Rotoren permanentmagneterregter Synchronmaschinen","author":[{"full_name":"Haase, Michael","first_name":"Michael","last_name":"Haase","id":"35970"},{"full_name":"Behrendt, Marius","first_name":"Marius","last_name":"Behrendt"},{"id":"14073","last_name":"Hengsbach","first_name":"Florian","full_name":"Hengsbach, Florian"},{"id":"60979","first_name":"Vinay","last_name":"Kunnathully Sathees Kumar","full_name":"Kunnathully Sathees Kumar, Vinay"},{"id":"28520","full_name":"Magerkohl, Sebastian","first_name":"Sebastian","last_name":"Magerkohl"},{"full_name":"Magyar, Balázs","last_name":"Magyar","first_name":"Balázs","id":"97759"},{"full_name":"Ponick, Bernd","first_name":"Bernd","last_name":"Ponick"},{"id":"43720","full_name":"Schaper, Mirko","last_name":"Schaper","first_name":"Mirko"},{"last_name":"Zimmer","first_name":"Detmar","full_name":"Zimmer, Detmar","id":"604"}],"date_updated":"2026-01-06T08:09:33Z","publication_status":"published","place":"Hannover","oa":"1","citation":{"mla":"Haase, Michael, et al. <i>Additive Fertigung im Elektromaschinenbau: Erforschung von Potentialen der additiven Fertigung in Rotoren permanentmagneterregter Synchronmaschinen</i>. Technische Informationsbibliothek, 2025, doi:<a href=\"https://doi.org/10.34657/26753\">10.34657/26753</a>.","bibtex":"@book{Haase_Behrendt_Hengsbach_Kunnathully Sathees Kumar_Magerkohl_Magyar_Ponick_Schaper_Zimmer_2025, place={Hannover}, title={Additive Fertigung im Elektromaschinenbau: Erforschung von Potentialen der additiven Fertigung in Rotoren permanentmagneterregter Synchronmaschinen}, DOI={<a href=\"https://doi.org/10.34657/26753\">10.34657/26753</a>}, publisher={Technische Informationsbibliothek}, author={Haase, Michael and Behrendt, Marius and Hengsbach, Florian and Kunnathully Sathees Kumar, Vinay and Magerkohl, Sebastian and Magyar, Balázs and Ponick, Bernd and Schaper, Mirko and Zimmer, Detmar}, year={2025} }","ama":"Haase M, Behrendt M, Hengsbach F, et al. <i>Additive Fertigung im Elektromaschinenbau: Erforschung von Potentialen der additiven Fertigung in Rotoren permanentmagneterregter Synchronmaschinen</i>. Technische Informationsbibliothek; 2025. doi:<a href=\"https://doi.org/10.34657/26753\">10.34657/26753</a>","ieee":"M. Haase <i>et al.</i>, <i>Additive Fertigung im Elektromaschinenbau: Erforschung von Potentialen der additiven Fertigung in Rotoren permanentmagneterregter Synchronmaschinen</i>. Hannover: Technische Informationsbibliothek, 2025.","apa":"Haase, M., Behrendt, M., Hengsbach, F., Kunnathully Sathees Kumar, V., Magerkohl, S., Magyar, B., Ponick, B., Schaper, M., &#38; Zimmer, D. (2025). <i>Additive Fertigung im Elektromaschinenbau: Erforschung von Potentialen der additiven Fertigung in Rotoren permanentmagneterregter Synchronmaschinen</i>. Technische Informationsbibliothek. <a href=\"https://doi.org/10.34657/26753\">https://doi.org/10.34657/26753</a>","chicago":"Haase, Michael, Marius Behrendt, Florian Hengsbach, Vinay Kunnathully Sathees Kumar, Sebastian Magerkohl, Balázs Magyar, Bernd Ponick, Mirko Schaper, and Detmar Zimmer. <i>Additive Fertigung im Elektromaschinenbau: Erforschung von Potentialen der additiven Fertigung in Rotoren permanentmagneterregter Synchronmaschinen</i>. Hannover: Technische Informationsbibliothek, 2025. <a href=\"https://doi.org/10.34657/26753\">https://doi.org/10.34657/26753</a>.","short":"M. Haase, M. Behrendt, F. Hengsbach, V. Kunnathully Sathees Kumar, S. Magerkohl, B. Magyar, B. Ponick, M. Schaper, D. Zimmer, Additive Fertigung im Elektromaschinenbau: Erforschung von Potentialen der additiven Fertigung in Rotoren permanentmagneterregter Synchronmaschinen, Technische Informationsbibliothek, Hannover, 2025."},"_id":"63209","publisher":"Technische Informationsbibliothek","user_id":"97759","status":"public","has_accepted_license":"1"},{"language":[{"iso":"eng"}],"article_number":"L042068","doi":"10.1103/8hy1-m5gg","author":[{"first_name":"Luca","last_name":"Bianchi","full_name":"Bianchi, Luca"},{"last_name":"Marconi","first_name":"Carlo","full_name":"Marconi, Carlo"},{"full_name":"Ares, Laura","first_name":"Laura","last_name":"Ares"},{"full_name":"Bacco, Davide","first_name":"Davide","last_name":"Bacco"},{"id":"75127","first_name":"Jan","orcid":"0000-0002-5844-3205","last_name":"Sperling","full_name":"Sperling, Jan"}],"publication_identifier":{"issn":["2643-1564"]},"year":"2025","title":"Unified boson sampling","intvolume":"         7","date_updated":"2026-01-09T08:03:38Z","publication_status":"published","date_created":"2026-01-09T08:02:57Z","department":[{"_id":"623"},{"_id":"15"},{"_id":"170"},{"_id":"706"},{"_id":"429"}],"type":"journal_article","publication":"Physical Review Research","issue":"4","abstract":[{"lang":"eng","text":"<jats:p>Boson sampling is a key candidate for demonstrating quantum advantage and has already yielded significant advances in quantum simulation, machine learning, and graph theory. In this work, a unification and extension of distinct forms of boson sampling is developed. The devised protocol merges discrete-variable scattershot boson sampling with continuous-variable Gaussian boson sampling. Therefore, it is rendered possible to harness the complexity of more interesting states, such as squeezed photons, in advanced sampling protocols. A generating function formalism is developed for the joint description of multiphoton and multimode light undergoing Gaussian transformations. The resulting analytical tools enable one to explore interfaces of different photonic quantum-information-processing platforms. A numerical simulation of unified sampling is carried out, benchmarking its performance, complexity, and scalability. Entanglement is characterized to exemplify the generation of quantum correlations from the nonlinear interactions of a unified sampler.</jats:p>"}],"publisher":"American Physical Society (APS)","_id":"63534","volume":7,"user_id":"75127","status":"public","citation":{"short":"L. Bianchi, C. Marconi, L. Ares, D. Bacco, J. Sperling, Physical Review Research 7 (2025).","chicago":"Bianchi, Luca, Carlo Marconi, Laura Ares, Davide Bacco, and Jan Sperling. “Unified Boson Sampling.” <i>Physical Review Research</i> 7, no. 4 (2025). <a href=\"https://doi.org/10.1103/8hy1-m5gg\">https://doi.org/10.1103/8hy1-m5gg</a>.","ieee":"L. Bianchi, C. Marconi, L. Ares, D. Bacco, and J. Sperling, “Unified boson sampling,” <i>Physical Review Research</i>, vol. 7, no. 4, Art. no. L042068, 2025, doi: <a href=\"https://doi.org/10.1103/8hy1-m5gg\">10.1103/8hy1-m5gg</a>.","apa":"Bianchi, L., Marconi, C., Ares, L., Bacco, D., &#38; Sperling, J. (2025). Unified boson sampling. <i>Physical Review Research</i>, <i>7</i>(4), Article L042068. <a href=\"https://doi.org/10.1103/8hy1-m5gg\">https://doi.org/10.1103/8hy1-m5gg</a>","bibtex":"@article{Bianchi_Marconi_Ares_Bacco_Sperling_2025, title={Unified boson sampling}, volume={7}, DOI={<a href=\"https://doi.org/10.1103/8hy1-m5gg\">10.1103/8hy1-m5gg</a>}, number={4L042068}, journal={Physical Review Research}, publisher={American Physical Society (APS)}, author={Bianchi, Luca and Marconi, Carlo and Ares, Laura and Bacco, Davide and Sperling, Jan}, year={2025} }","ama":"Bianchi L, Marconi C, Ares L, Bacco D, Sperling J. Unified boson sampling. <i>Physical Review Research</i>. 2025;7(4). doi:<a href=\"https://doi.org/10.1103/8hy1-m5gg\">10.1103/8hy1-m5gg</a>","mla":"Bianchi, Luca, et al. “Unified Boson Sampling.” <i>Physical Review Research</i>, vol. 7, no. 4, L042068, American Physical Society (APS), 2025, doi:<a href=\"https://doi.org/10.1103/8hy1-m5gg\">10.1103/8hy1-m5gg</a>."}},{"volume":2025,"user_id":"405","_id":"58650","publisher":"GITO mbH Verlag","status":"public","oa":"1","quality_controlled":"1","citation":{"ama":"Gräßler I, Pottebaum J, Nyhuis P, Stark R, Thoben K-D, Wiederkehr P. Hybrid Decision Support in Product Creation - Improving performance with data science and artificial intelligence. <i>Industry 40 Science</i>. 2025;2025(1). doi:<a href=\"https://doi.org/10.30844/i4sd.25.1.18\">10.30844/i4sd.25.1.18</a>","bibtex":"@article{Gräßler_Pottebaum_Nyhuis_Stark_Thoben_Wiederkehr_2025, title={Hybrid Decision Support in Product Creation - Improving performance with data science and artificial intelligence}, volume={2025}, DOI={<a href=\"https://doi.org/10.30844/i4sd.25.1.18\">10.30844/i4sd.25.1.18</a>}, number={1}, journal={Industry 4.0 Science}, publisher={GITO mbH Verlag}, author={Gräßler, Iris and Pottebaum, Jens and Nyhuis, Peter and Stark, Rainer and Thoben, Klaus-Dieter and Wiederkehr, Petra}, year={2025} }","mla":"Gräßler, Iris, et al. “Hybrid Decision Support in Product Creation - Improving Performance with Data Science and Artificial Intelligence.” <i>Industry 4.0 Science</i>, vol. 2025, no. 1, GITO mbH Verlag, 2025, doi:<a href=\"https://doi.org/10.30844/i4sd.25.1.18\">10.30844/i4sd.25.1.18</a>.","short":"I. Gräßler, J. Pottebaum, P. Nyhuis, R. Stark, K.-D. Thoben, P. Wiederkehr, Industry 4.0 Science 2025 (2025).","chicago":"Gräßler, Iris, Jens Pottebaum, Peter Nyhuis, Rainer Stark, Klaus-Dieter Thoben, and Petra Wiederkehr. “Hybrid Decision Support in Product Creation - Improving Performance with Data Science and Artificial Intelligence.” <i>Industry 4.0 Science</i> 2025, no. 1 (2025). <a href=\"https://doi.org/10.30844/i4sd.25.1.18\">https://doi.org/10.30844/i4sd.25.1.18</a>.","apa":"Gräßler, I., Pottebaum, J., Nyhuis, P., Stark, R., Thoben, K.-D., &#38; Wiederkehr, P. (2025). Hybrid Decision Support in Product Creation - Improving performance with data science and artificial intelligence. <i>Industry 4.0 Science</i>, <i>2025</i>(1). <a href=\"https://doi.org/10.30844/i4sd.25.1.18\">https://doi.org/10.30844/i4sd.25.1.18</a>","ieee":"I. Gräßler, J. Pottebaum, P. Nyhuis, R. Stark, K.-D. Thoben, and P. Wiederkehr, “Hybrid Decision Support in Product Creation - Improving performance with data science and artificial intelligence,” <i>Industry 4.0 Science</i>, vol. 2025, no. 1, 2025, doi: <a href=\"https://doi.org/10.30844/i4sd.25.1.18\">10.30844/i4sd.25.1.18</a>."},"alternative_title":["Hybride Entscheidungsunterstützung in der Produktentstehung - Mit Data Science und Künstlicher Intelligenz die Leistungsfähigkeit erhöhen"],"doi":"10.30844/i4sd.25.1.18","language":[{"iso":"eng"}],"main_file_link":[{"open_access":"1"}],"intvolume":"      2025","article_type":"original","date_updated":"2025-02-15T09:40:52Z","publication_status":"published","author":[{"id":"47565","orcid":"0000-0001-5765-971X","last_name":"Gräßler","first_name":"Iris","full_name":"Gräßler, Iris"},{"last_name":"Pottebaum","first_name":"Jens","orcid":"http://orcid.org/0000-0001-8778-2989","full_name":"Pottebaum, Jens","id":"405"},{"first_name":"Peter","last_name":"Nyhuis","full_name":"Nyhuis, Peter"},{"full_name":"Stark, Rainer","first_name":"Rainer","last_name":"Stark"},{"first_name":"Klaus-Dieter","last_name":"Thoben","full_name":"Thoben, Klaus-Dieter"},{"first_name":"Petra","last_name":"Wiederkehr","full_name":"Wiederkehr, Petra"}],"publication_identifier":{"issn":["2942-6170"]},"year":"2025","title":"Hybrid Decision Support in Product Creation - Improving performance with data science and artificial intelligence","department":[{"_id":"152"}],"type":"journal_article","keyword":["AI","artificial intelligence","Data Science","decision support","extreme data","Künstliche Intelligenz","product creation","product development"],"date_created":"2025-02-15T09:31:30Z","abstract":[{"text":"Technical systems are characterized by increasing interdisciplinarity, complexity and networking. A product and its corresponding production systems require interdisciplinary multi-objective optimization. Sustainability and recyclability demands increase said complexity. The efficiency of previously established engineering methods is reaching its limits, which can only be overcome by systematic integration of extreme data. The aim of \"hybrid decision support\" is as follows: Data science and artificial intelligence should be used to supplement human capabilities in conjunction with existing heuristics, methods, modeling and simulation to increase the efficiency of product creation.","lang":"eng"}],"publication":"Industry 4.0 Science","issue":"1"},{"date_created":"2025-02-24T11:52:16Z","type":"journal_article","issue":"2","publication":"Journal of Nonlinear Science","abstract":[{"lang":"eng","text":"<jats:title>Abstract</jats:title>\n          <jats:p>Fractional dissipation is a powerful tool to study nonlocal physical phenomena such as damping models. The design of geometric, in particular, variational integrators for the numerical simulation of such systems relies on a variational formulation of the model. In Jiménez and Ober-Blöbaum (J Nonlinear Sci 31:46, 2021), a new approach is proposed to deal with dissipative systems including fractionally damped systems in a variational way for both, the continuous and discrete setting. It is based on the doubling of variables and their fractional derivatives. The aim of this work is to derive higher-order fractional variational integrators by means of convolution quadrature (CQ) based on backward difference formulas. We then provide numerical methods that are of order 2 improving a previous result in Jiménez and Ober-Blöbaum (J Nonlinear Sci 31:46, 2021). The convergence properties of the fractional variational integrators and saturation effects due to the approximation of the fractional derivatives by CQ are studied numerically.</jats:p>"}],"article_number":"38","language":[{"iso":"eng"}],"doi":"10.1007/s00332-025-10131-0","title":"Fractional Variational Integrators Based on Convolution Quadrature","year":"2025","author":[{"full_name":"Hariz Belgacem, Khaled","first_name":"Khaled","last_name":"Hariz Belgacem"},{"full_name":"Jiménez, Fernando","first_name":"Fernando","last_name":"Jiménez"},{"full_name":"Ober-Blöbaum, Sina","first_name":"Sina","last_name":"Ober-Blöbaum"}],"publication_identifier":{"issn":["0938-8974","1432-1467"]},"publication_status":"published","date_updated":"2025-02-24T11:55:58Z","intvolume":"        35","citation":{"chicago":"Hariz Belgacem, Khaled, Fernando Jiménez, and Sina Ober-Blöbaum. “Fractional Variational Integrators Based on Convolution Quadrature.” <i>Journal of Nonlinear Science</i> 35, no. 2 (2025). <a href=\"https://doi.org/10.1007/s00332-025-10131-0\">https://doi.org/10.1007/s00332-025-10131-0</a>.","short":"K. Hariz Belgacem, F. Jiménez, S. Ober-Blöbaum, Journal of Nonlinear Science 35 (2025).","ieee":"K. Hariz Belgacem, F. Jiménez, and S. Ober-Blöbaum, “Fractional Variational Integrators Based on Convolution Quadrature,” <i>Journal of Nonlinear Science</i>, vol. 35, no. 2, Art. no. 38, 2025, doi: <a href=\"https://doi.org/10.1007/s00332-025-10131-0\">10.1007/s00332-025-10131-0</a>.","apa":"Hariz Belgacem, K., Jiménez, F., &#38; Ober-Blöbaum, S. (2025). Fractional Variational Integrators Based on Convolution Quadrature. <i>Journal of Nonlinear Science</i>, <i>35</i>(2), Article 38. <a href=\"https://doi.org/10.1007/s00332-025-10131-0\">https://doi.org/10.1007/s00332-025-10131-0</a>","bibtex":"@article{Hariz Belgacem_Jiménez_Ober-Blöbaum_2025, title={Fractional Variational Integrators Based on Convolution Quadrature}, volume={35}, DOI={<a href=\"https://doi.org/10.1007/s00332-025-10131-0\">10.1007/s00332-025-10131-0</a>}, number={238}, journal={Journal of Nonlinear Science}, publisher={Springer Science and Business Media LLC}, author={Hariz Belgacem, Khaled and Jiménez, Fernando and Ober-Blöbaum, Sina}, year={2025} }","ama":"Hariz Belgacem K, Jiménez F, Ober-Blöbaum S. Fractional Variational Integrators Based on Convolution Quadrature. <i>Journal of Nonlinear Science</i>. 2025;35(2). doi:<a href=\"https://doi.org/10.1007/s00332-025-10131-0\">10.1007/s00332-025-10131-0</a>","mla":"Hariz Belgacem, Khaled, et al. “Fractional Variational Integrators Based on Convolution Quadrature.” <i>Journal of Nonlinear Science</i>, vol. 35, no. 2, 38, Springer Science and Business Media LLC, 2025, doi:<a href=\"https://doi.org/10.1007/s00332-025-10131-0\">10.1007/s00332-025-10131-0</a>."},"publisher":"Springer Science and Business Media LLC","_id":"58811","user_id":"98857","volume":35,"status":"public"},{"_id":"58556","publisher":"The Tire Society","language":[{"iso":"eng"}],"doi":"https://doi.org/10.2346/TST-24-009","user_id":"77313","author":[{"first_name":"Lars","orcid":"0000-0002-2938-5616","last_name":"Muth","full_name":"Muth, Lars","id":"77313"},{"first_name":"Raphael","last_name":"Zharia","full_name":"Zharia, Raphael"},{"full_name":"Sahin, Hürkan","first_name":"Hürkan","last_name":"Sahin"},{"full_name":"Sextro, Walter","first_name":"Walter","last_name":"Sextro","id":"21220"}],"title":"Prediction of the Frictional Power Distribution in the Tire Contact Patch Based on an Empirical Tire Model and an Artificial Neural Network","status":"public","year":"2025","article_type":"original","date_updated":"2025-02-27T19:53:09Z","publication_status":"epub_ahead","date_created":"2025-02-10T19:54:28Z","department":[{"_id":"151"},{"_id":"9"}],"type":"journal_article","citation":{"ieee":"L. Muth, R. Zharia, H. Sahin, and W. Sextro, “Prediction of the Frictional Power Distribution in the Tire Contact Patch Based on an Empirical Tire Model and an Artificial Neural Network,” <i>Tire Science and Technology</i>, 2025, doi: <a href=\"https://doi.org/10.2346/TST-24-009\">https://doi.org/10.2346/TST-24-009</a>.","mla":"Muth, Lars, et al. “Prediction of the Frictional Power Distribution in the Tire Contact Patch Based on an Empirical Tire Model and an Artificial Neural Network.” <i>Tire Science and Technology</i>, The Tire Society, 2025, doi:<a href=\"https://doi.org/10.2346/TST-24-009\">https://doi.org/10.2346/TST-24-009</a>.","apa":"Muth, L., Zharia, R., Sahin, H., &#38; Sextro, W. (2025). Prediction of the Frictional Power Distribution in the Tire Contact Patch Based on an Empirical Tire Model and an Artificial Neural Network. <i>Tire Science and Technology</i>. <a href=\"https://doi.org/10.2346/TST-24-009\">https://doi.org/10.2346/TST-24-009</a>","bibtex":"@article{Muth_Zharia_Sahin_Sextro_2025, title={Prediction of the Frictional Power Distribution in the Tire Contact Patch Based on an Empirical Tire Model and an Artificial Neural Network}, DOI={<a href=\"https://doi.org/10.2346/TST-24-009\">https://doi.org/10.2346/TST-24-009</a>}, journal={Tire Science and Technology}, publisher={The Tire Society}, author={Muth, Lars and Zharia, Raphael and Sahin, Hürkan and Sextro, Walter}, year={2025} }","ama":"Muth L, Zharia R, Sahin H, Sextro W. Prediction of the Frictional Power Distribution in the Tire Contact Patch Based on an Empirical Tire Model and an Artificial Neural Network. <i>Tire Science and Technology</i>. Published online 2025. doi:<a href=\"https://doi.org/10.2346/TST-24-009\">https://doi.org/10.2346/TST-24-009</a>","short":"L. Muth, R. Zharia, H. Sahin, W. Sextro, Tire Science and Technology (2025).","chicago":"Muth, Lars, Raphael Zharia, Hürkan Sahin, and Walter Sextro. “Prediction of the Frictional Power Distribution in the Tire Contact Patch Based on an Empirical Tire Model and an Artificial Neural Network.” <i>Tire Science and Technology</i>, 2025. <a href=\"https://doi.org/10.2346/TST-24-009\">https://doi.org/10.2346/TST-24-009</a>."},"publication":"Tire Science and Technology","abstract":[{"lang":"eng","text":"To predict and prevent uneven tire wear in addition to a reduction of overall tire wear, it is essential to estimate not only the total amount of wear but also how the wear is distributed across the tire width. This requires knowledge of the frictional power distribution in the tire contact patch, which is the basis for calculating tire wear using a wear law. Usually, only 3D structural tire models can generate such distributed contact results. However, they involve high computational costs and cannot be used for comprehensive optimization of a vehicle’s suspension system with respect to tire wear characteristics. Hence, this contribution presents a methodology on how to accelerate the prediction of the frictional power distribution using two components: The structural tire model is replaced by an empirical tire model that on its own is not able to generate distributed contact results. Therefore, an artificial neural network is trained to predict the desired contact results from the kinematic quantities calculated by the empirical tire model. In the initial training phase, both components are fitted to data generated by the original complex tire model. After training, the empirical tire model can replace the structural tire model in vehicle simulations, resulting in significantly shorter calculation times. The simulation results are fed into the artificial neural network, which predicts the frictional power distributions over the tire width with negligible additional effort. Overall, the methodology reduces calculation time for the prediction of tire wear based on virtual test drives to approximately 25% of the time needed when using structural tire models."}],"quality_controlled":"1","extern":"1"},{"abstract":[{"lang":"eng","text":"<jats:p>Die Nahrungszubereitung als zentraler Bestandteil eines haushaltsbezogenen Unterrichts dient der Anbahnung von Kompetenzen für die Zubereitung von Speisen und die Gestaltung von Mahlzeiten unter Berücksichtigung von Gesundheit und Nachhaltigkeit. Ebenso bedeutsam, jedoch häufig vernachlässigt, ist die Berücksichtigung unterschiedlicher Esskulturen, lebensweltlicher Erfahrungen und sozioökonomischer Hintergründe der Lernenden.</jats:p>"}],"publication":"HiBiFo – Haushalt in Bildung &amp; Forschung","issue":"1","department":[{"_id":"35"},{"_id":"17"},{"_id":"22"},{"_id":"396"}],"type":"journal_article","date_created":"2025-04-01T08:50:40Z","intvolume":"        14","date_updated":"2025-04-01T08:53:14Z","publication_status":"published","publication_identifier":{"issn":["2193-8806","2196-1662"]},"author":[{"full_name":"Schlegel-Matthies, Kirsten","last_name":"Schlegel-Matthies","first_name":"Kirsten"}],"year":"2025","title":"Essen in der Vielfalt – Esskultur und Nahrungszubereitung","doi":"10.3224/hibifo.v14i1.05","language":[{"iso":"ger"}],"citation":{"bibtex":"@article{Schlegel-Matthies_2025, title={Essen in der Vielfalt – Esskultur und Nahrungszubereitung}, volume={14}, DOI={<a href=\"https://doi.org/10.3224/hibifo.v14i1.05\">10.3224/hibifo.v14i1.05</a>}, number={1}, journal={HiBiFo – Haushalt in Bildung &#38;amp; Forschung}, publisher={Verlag Barbara Budrich GmbH}, author={Schlegel-Matthies, Kirsten}, year={2025}, pages={49–63} }","ama":"Schlegel-Matthies K. Essen in der Vielfalt – Esskultur und Nahrungszubereitung. <i>HiBiFo – Haushalt in Bildung &#38;amp; Forschung</i>. 2025;14(1):49-63. doi:<a href=\"https://doi.org/10.3224/hibifo.v14i1.05\">10.3224/hibifo.v14i1.05</a>","mla":"Schlegel-Matthies, Kirsten. “Essen in der Vielfalt – Esskultur und Nahrungszubereitung.” <i>HiBiFo – Haushalt in Bildung &#38;amp; Forschung</i>, vol. 14, no. 1, Verlag Barbara Budrich GmbH, 2025, pp. 49–63, doi:<a href=\"https://doi.org/10.3224/hibifo.v14i1.05\">10.3224/hibifo.v14i1.05</a>.","short":"K. Schlegel-Matthies, HiBiFo – Haushalt in Bildung &#38;amp; Forschung 14 (2025) 49–63.","chicago":"Schlegel-Matthies, Kirsten. “Essen in der Vielfalt – Esskultur und Nahrungszubereitung.” <i>HiBiFo – Haushalt in Bildung &#38;amp; Forschung</i> 14, no. 1 (2025): 49–63. <a href=\"https://doi.org/10.3224/hibifo.v14i1.05\">https://doi.org/10.3224/hibifo.v14i1.05</a>.","ieee":"K. Schlegel-Matthies, “Essen in der Vielfalt – Esskultur und Nahrungszubereitung,” <i>HiBiFo – Haushalt in Bildung &#38;amp; Forschung</i>, vol. 14, no. 1, pp. 49–63, 2025, doi: <a href=\"https://doi.org/10.3224/hibifo.v14i1.05\">10.3224/hibifo.v14i1.05</a>.","apa":"Schlegel-Matthies, K. (2025). Essen in der Vielfalt – Esskultur und Nahrungszubereitung. <i>HiBiFo – Haushalt in Bildung &#38;amp; Forschung</i>, <i>14</i>(1), 49–63. <a href=\"https://doi.org/10.3224/hibifo.v14i1.05\">https://doi.org/10.3224/hibifo.v14i1.05</a>"},"status":"public","volume":14,"user_id":"459","publisher":"Verlag Barbara Budrich GmbH","_id":"59229","page":"49-63"},{"date_created":"2025-04-02T09:25:58Z","place":"Paderborn","type":"dissertation","keyword":["Heat transfer","PCM","numerical simulation","renewable energy","heat storage"],"department":[{"_id":"9"}],"citation":{"ama":"Grabo M. <i>Modeling and Optimization of Energy System Components Equipped with Phase Change Materials</i>.; 2025. doi:<a href=\"https://doi.org/10.17619/UNIPB/1-2199\">10.17619/UNIPB/1-2199</a>","bibtex":"@book{Grabo_2025, place={Paderborn}, title={Modeling and optimization of energy system components equipped with phase change materials}, DOI={<a href=\"https://doi.org/10.17619/UNIPB/1-2199\">10.17619/UNIPB/1-2199</a>}, author={Grabo, Matti}, year={2025} }","mla":"Grabo, Matti. <i>Modeling and Optimization of Energy System Components Equipped with Phase Change Materials</i>. 2025, doi:<a href=\"https://doi.org/10.17619/UNIPB/1-2199\">10.17619/UNIPB/1-2199</a>.","chicago":"Grabo, Matti. <i>Modeling and Optimization of Energy System Components Equipped with Phase Change Materials</i>. Paderborn, 2025. <a href=\"https://doi.org/10.17619/UNIPB/1-2199\">https://doi.org/10.17619/UNIPB/1-2199</a>.","short":"M. Grabo, Modeling and Optimization of Energy System Components Equipped with Phase Change Materials, Paderborn, 2025.","apa":"Grabo, M. (2025). <i>Modeling and optimization of energy system components equipped with phase change materials</i>. <a href=\"https://doi.org/10.17619/UNIPB/1-2199\">https://doi.org/10.17619/UNIPB/1-2199</a>","ieee":"M. Grabo, <i>Modeling and optimization of energy system components equipped with phase change materials</i>. Paderborn, 2025."},"supervisor":[{"id":"665","last_name":"Kenig","first_name":"Eugeny","full_name":"Kenig, Eugeny"}],"abstract":[{"text":"Diese Arbeit behandelt die Modellierung und Optimierung von mit Phasenwechselmaterialien (PCM) ausgestatteten, energietechnischen Komponenten anhand zweier Fallstudien. PCM sind Materialien, deren Phasenwechseleigenschaften während des Schmelzens und Erstarrens für Heiz- und Kühlzwecke genutzt werden. Zunächst werden die theoretischen Grundlagen zu Wärmeübertragungsproblemen mit Phasenwechsel erörtert und entsprechende numerische Lösungsmethoden diskutiert. Ein Modell für Phasenwechselvorgänge wird vorgestellt, welches anhand analytischer Lösungen validiert wurde und in den Fallstudien zum Einsatz kam. Für beide Fallstudien wird der Stand der Technik erörtert und die entsprechenden Forschungsfragen werden formuliert. Die erste Fallstudie behandelt PCM-integrierte Photovoltaikmodule und die zweite Festbett-Latentwärmespeicher, welche nicht-kugelförmiger PCM-Kapseln verwenden. Für beide Systeme wurden thermische Model-le entwickelt und anhand experimenteller Daten mit guter Genauigkeit validiert. Diese Modelle wurden in Parameterstudien eingesetzt, um optimierte Systemkonfigurationen zu identifizieren. Die vorgestellten Ergebnisse zeigen, dass ein PCM-Kühlkörper mit ausreichender Dicke und Wärmeleitfähigkeit den Wirkungsgrad und die Lebensdauer von Photovoltaikmodulen erheblich erhöht. Darüber hinaus verbessern PCM-Kapseln mit hoher Packungs-dichte und Oberfläche sowohl die volumenspezifische Speicherkapazität als auch die thermische Leistung von Festbett-Latentwärmespeichern.","lang":"ger"},{"text":"This thesis explores the modeling and optimization of energy system components incorporating phase change materials (PCM) through two different case studies. PCM are materials whose phase change characteristics during melting and solidification are utilized for heating and cooling purposes. The theoretical foundations of heat transfer problems involving phase change, along with the relevant numerical solution methods, are discussed. A phase change model is presented, which was validated against analytical solutions and applied in the case studies. For both case studies, a review of the state of the art is provided, followed by the formulation of specific research problems. The first case study investigated PCM-enhanced photovoltaic modules, while the second focused on packed bed latent heat storages (PBLHS) utilizing non-spherical PCM capsules. Thermal models were developed for both systems and validated with good accuracy against experimental data. These models were employed in parameter studies to identify optimized system configurations. The presented results demonstrate that a PCM heat sink with sufficient thickness and thermal conductivity can significantly improve the efficiency and lifespan of photovoltaic modules. Furthermore, PCM capsules with both high packing density and surface area increase the volume-specific storage capacity and thermal power output of PBLHS.","lang":"eng"}],"license":"https://creativecommons.org/licenses/by-nc-sa/4.0/","language":[{"iso":"eng"}],"_id":"59239","user_id":"66520","doi":"10.17619/UNIPB/1-2199","status":"public","year":"2025","title":"Modeling and optimization of energy system components equipped with phase change materials","author":[{"full_name":"Grabo, Matti","last_name":"Grabo","first_name":"Matti","id":"66520"}],"publication_status":"published","date_updated":"2025-04-02T09:44:05Z"},{"citation":{"short":"A. Lang, E. Schaefer, Y. Kupriyanova, J. Goletzke, K. Weber, A. Buyken, S. Kahl, O. Zaharia, C. Herder, V. Schrauwen-Hinderling, O. Kuss, R. Wagner, M. Roden, S. Schlesinger, G. Diabetes Study Group, Nutr J 24 (2025) 74.","chicago":"Lang, A, E Schaefer, Y Kupriyanova, J Goletzke, KS Weber, Anette Buyken, S Kahl, et al. “Cross-Sectional Association between the Isocaloric Replacement of Carbohydrates with Protein and Fat in Relation to Fat Compartments Distribution and Hepatic Lipid Content in Recent-Onset Type 1 and Type 2 Diabetes.” <i>Nutr J</i> 24, no. 1 (2025): 74.","apa":"Lang, A., Schaefer, E., Kupriyanova, Y., Goletzke, J., Weber, K., Buyken, A., Kahl, S., Zaharia, O., Herder, C., Schrauwen-Hinderling, V., Kuss, O., Wagner, R., Roden, M., Schlesinger, S., &#38; Diabetes Study Group, G. (2025). Cross-sectional association between the isocaloric replacement of carbohydrates with protein and fat in relation to fat compartments distribution and hepatic lipid content in recent-onset type 1 and type 2 diabetes. <i>Nutr J</i>, <i>24</i>(1), 74.","ieee":"A. Lang <i>et al.</i>, “Cross-sectional association between the isocaloric replacement of carbohydrates with protein and fat in relation to fat compartments distribution and hepatic lipid content in recent-onset type 1 and type 2 diabetes.,” <i>Nutr J</i>, vol. 24, no. 1, p. 74, 2025.","ama":"Lang A, Schaefer E, Kupriyanova Y, et al. Cross-sectional association between the isocaloric replacement of carbohydrates with protein and fat in relation to fat compartments distribution and hepatic lipid content in recent-onset type 1 and type 2 diabetes. <i>Nutr J</i>. 2025;24(1):74.","bibtex":"@article{Lang_Schaefer_Kupriyanova_Goletzke_Weber_Buyken_Kahl_Zaharia_Herder_Schrauwen-Hinderling_et al._2025, title={Cross-sectional association between the isocaloric replacement of carbohydrates with protein and fat in relation to fat compartments distribution and hepatic lipid content in recent-onset type 1 and type 2 diabetes.}, volume={24}, number={1}, journal={Nutr J}, author={Lang, A and Schaefer, E and Kupriyanova, Y and Goletzke, J and Weber, KS and Buyken, Anette and Kahl, S and Zaharia, OP and Herder, C and Schrauwen-Hinderling, VB and et al.}, year={2025}, pages={74} }","mla":"Lang, A., et al. “Cross-Sectional Association between the Isocaloric Replacement of Carbohydrates with Protein and Fat in Relation to Fat Compartments Distribution and Hepatic Lipid Content in Recent-Onset Type 1 and Type 2 Diabetes.” <i>Nutr J</i>, vol. 24, no. 1, 2025, p. 74."},"publication":"Nutr J","issue":"1","date_created":"2025-06-11T08:54:08Z","external_id":{"pmid":["40349038"]},"department":[{"_id":"22"}],"type":"journal_article","author":[{"first_name":"A","last_name":"Lang","full_name":"Lang, A"},{"full_name":"Schaefer, E","first_name":"E","last_name":"Schaefer"},{"full_name":"Kupriyanova, Y","first_name":"Y","last_name":"Kupriyanova"},{"full_name":"Goletzke, J","first_name":"J","last_name":"Goletzke"},{"first_name":"KS","last_name":"Weber","full_name":"Weber, KS"},{"id":"65985","last_name":"Buyken","first_name":"Anette","full_name":"Buyken, Anette"},{"first_name":"S","last_name":"Kahl","full_name":"Kahl, S"},{"full_name":"Zaharia, OP","first_name":"OP","last_name":"Zaharia"},{"first_name":"C","last_name":"Herder","full_name":"Herder, C"},{"full_name":"Schrauwen-Hinderling, VB","last_name":"Schrauwen-Hinderling","first_name":"VB"},{"full_name":"Kuss, O","last_name":"Kuss","first_name":"O"},{"full_name":"Wagner, R","first_name":"R","last_name":"Wagner"},{"full_name":"Roden, M","last_name":"Roden","first_name":"M"},{"last_name":"Schlesinger","first_name":"S","full_name":"Schlesinger, S"},{"full_name":"Diabetes Study Group, German","first_name":"German","last_name":"Diabetes Study Group"}],"publication_identifier":{"issn":["1475-2891"]},"status":"public","year":"2025","title":"Cross-sectional association between the isocaloric replacement of carbohydrates with protein and fat in relation to fat compartments distribution and hepatic lipid content in recent-onset type 1 and type 2 diabetes.","intvolume":"        24","date_updated":"2025-06-11T08:55:22Z","_id":"60186","language":[{"iso":"eng"}],"page":"74","volume":24,"user_id":"92491","pmid":"1"},{"author":[{"first_name":"I","last_name":"Perrar","full_name":"Perrar, I"},{"full_name":"Hohoff, E","last_name":"Hohoff","first_name":"E"},{"full_name":"Lesani, A","last_name":"Lesani","first_name":"A"},{"first_name":"S","last_name":"Schmitting","full_name":"Schmitting, S"},{"full_name":"Libuda, Lars","first_name":"Lars","orcid":"0000-0003-1603-3133","last_name":"Libuda","id":"88682"},{"id":"49428","first_name":"Bettina","orcid":"0000-0001-5351-1785","last_name":"Krüger","full_name":"Krüger, Bettina"},{"full_name":"Stutz, Bianca","last_name":"Stutz","first_name":"Bianca","id":"77099"},{"full_name":"Nöthlings, U","last_name":"Nöthlings","first_name":"U"},{"last_name":"Buyken","first_name":"Anette","full_name":"Buyken, Anette","id":"65985"},{"first_name":"U","last_name":"Alexy","full_name":"Alexy, U"},{"full_name":"Jankovic, N","first_name":"N","last_name":"Jankovic"}],"publication_identifier":{"issn":["1436-6207","1436-6215"]},"year":"2025","title":"Circadian eating patterns track from infancy to pre- and primary school-age, but are not prospectively associated with body composition in childhood - Results of the DONALD cohort study.","status":"public","intvolume":"        64","date_updated":"2025-06-11T08:51:28Z","_id":"60182","language":[{"iso":"eng"}],"page":"165","volume":64,"user_id":"92491","pmid":"1","citation":{"ieee":"I. Perrar <i>et al.</i>, “Circadian eating patterns track from infancy to pre- and primary school-age, but are not prospectively associated with body composition in childhood - Results of the DONALD cohort study.,” <i>Eur J Nutr</i>, vol. 64, no. 4, p. 165, 2025.","apa":"Perrar, I., Hohoff, E., Lesani, A., Schmitting, S., Libuda, L., Krüger, B., Stutz, B., Nöthlings, U., Buyken, A., Alexy, U., &#38; Jankovic, N. (2025). Circadian eating patterns track from infancy to pre- and primary school-age, but are not prospectively associated with body composition in childhood - Results of the DONALD cohort study. <i>Eur J Nutr</i>, <i>64</i>(4), 165.","chicago":"Perrar, I, E Hohoff, A Lesani, S Schmitting, Lars Libuda, Bettina Krüger, Bianca Stutz, et al. “Circadian Eating Patterns Track from Infancy to Pre- and Primary School-Age, but Are Not Prospectively Associated with Body Composition in Childhood - Results of the DONALD Cohort Study.” <i>Eur J Nutr</i> 64, no. 4 (2025): 165.","short":"I. Perrar, E. Hohoff, A. Lesani, S. Schmitting, L. Libuda, B. Krüger, B. Stutz, U. Nöthlings, A. Buyken, U. Alexy, N. Jankovic, Eur J Nutr 64 (2025) 165.","mla":"Perrar, I., et al. “Circadian Eating Patterns Track from Infancy to Pre- and Primary School-Age, but Are Not Prospectively Associated with Body Composition in Childhood - Results of the DONALD Cohort Study.” <i>Eur J Nutr</i>, vol. 64, no. 4, 2025, p. 165.","bibtex":"@article{Perrar_Hohoff_Lesani_Schmitting_Libuda_Krüger_Stutz_Nöthlings_Buyken_Alexy_et al._2025, title={Circadian eating patterns track from infancy to pre- and primary school-age, but are not prospectively associated with body composition in childhood - Results of the DONALD cohort study.}, volume={64}, number={4}, journal={Eur J Nutr}, author={Perrar, I and Hohoff, E and Lesani, A and Schmitting, S and Libuda, Lars and Krüger, Bettina and Stutz, Bianca and Nöthlings, U and Buyken, Anette and Alexy, U and et al.}, year={2025}, pages={165} }","ama":"Perrar I, Hohoff E, Lesani A, et al. Circadian eating patterns track from infancy to pre- and primary school-age, but are not prospectively associated with body composition in childhood - Results of the DONALD cohort study. <i>Eur J Nutr</i>. 2025;64(4):165."},"publication":"Eur J Nutr","issue":"4","date_created":"2025-06-11T08:49:19Z","external_id":{"pmid":["40285866"]},"department":[{"_id":"22"}],"type":"journal_article"},{"citation":{"mla":"Della Corte, KA, et al. “Dietary Sugar Intake and Incident Type 2 Diabetes Risk: A Systematic Review and Dose-Response Meta-Analysis of Prospective Cohort Studies.” <i>Adv Nutr</i>, vol. 16, no. 5, 2025, p. 100413.","ama":"Della Corte K, Bosler T, McClure C, et al. Dietary Sugar Intake and Incident Type 2 Diabetes Risk: A Systematic Review and Dose-Response Meta-Analysis of Prospective Cohort Studies. <i>Adv Nutr</i>. 2025;16(5):100413.","bibtex":"@article{Della Corte_Bosler_McClure_Buyken_LeCheminant_Schwingshackl_Della Corte_2025, title={Dietary Sugar Intake and Incident Type 2 Diabetes Risk: A Systematic Review and Dose-Response Meta-Analysis of Prospective Cohort Studies.}, volume={16}, number={5}, journal={Adv Nutr}, author={Della Corte, KA and Bosler, T and McClure, C and Buyken, Anette and LeCheminant, JD and Schwingshackl, L and Della Corte, D}, year={2025}, pages={100413} }","apa":"Della Corte, K., Bosler, T., McClure, C., Buyken, A., LeCheminant, J., Schwingshackl, L., &#38; Della Corte, D. (2025). Dietary Sugar Intake and Incident Type 2 Diabetes Risk: A Systematic Review and Dose-Response Meta-Analysis of Prospective Cohort Studies. <i>Adv Nutr</i>, <i>16</i>(5), 100413.","ieee":"K. Della Corte <i>et al.</i>, “Dietary Sugar Intake and Incident Type 2 Diabetes Risk: A Systematic Review and Dose-Response Meta-Analysis of Prospective Cohort Studies.,” <i>Adv Nutr</i>, vol. 16, no. 5, p. 100413, 2025.","chicago":"Della Corte, KA, T Bosler, C McClure, Anette Buyken, JD LeCheminant, L Schwingshackl, and D Della Corte. “Dietary Sugar Intake and Incident Type 2 Diabetes Risk: A Systematic Review and Dose-Response Meta-Analysis of Prospective Cohort Studies.” <i>Adv Nutr</i> 16, no. 5 (2025): 100413.","short":"K. Della Corte, T. Bosler, C. McClure, A. Buyken, J. LeCheminant, L. Schwingshackl, D. Della Corte, Adv Nutr 16 (2025) 100413."},"publication":"Adv Nutr","issue":"5","department":[{"_id":"22"}],"type":"journal_article","date_created":"2025-06-11T08:51:45Z","external_id":{"pmid":["40122386"]},"intvolume":"        16","date_updated":"2025-06-11T08:52:32Z","author":[{"full_name":"Della Corte, KA","first_name":"KA","last_name":"Della Corte"},{"full_name":"Bosler, T","last_name":"Bosler","first_name":"T"},{"full_name":"McClure, C","last_name":"McClure","first_name":"C"},{"full_name":"Buyken, Anette","first_name":"Anette","last_name":"Buyken","id":"65985"},{"last_name":"LeCheminant","first_name":"JD","full_name":"LeCheminant, JD"},{"first_name":"L","last_name":"Schwingshackl","full_name":"Schwingshackl, L"},{"first_name":"D","last_name":"Della Corte","full_name":"Della Corte, D"}],"publication_identifier":{"issn":["2161-8313","2156-5376"]},"title":"Dietary Sugar Intake and Incident Type 2 Diabetes Risk: A Systematic Review and Dose-Response Meta-Analysis of Prospective Cohort Studies.","status":"public","year":"2025","volume":16,"user_id":"92491","pmid":"1","language":[{"iso":"eng"}],"_id":"60184","page":"100413"},{"date_created":"2025-06-11T08:55:41Z","external_id":{"pmid":["40445392"]},"department":[{"_id":"22"}],"type":"journal_article","citation":{"mla":"Revheim, I., et al. “Bread, Wholegrain Consumption and Weight Change from Middle to Late Adulthood: A Prospective Cohort Study. .” <i>Eur J Nutr</i>, vol. 64, no. 5, 2025, p. 197.","ama":"Revheim I, Sabir Z, Dierkes J, et al. Bread, wholegrain consumption and weight change from middle to late adulthood: a prospective cohort study. . <i>Eur J Nutr</i>. 2025;64(5):197.","bibtex":"@article{Revheim_Sabir_Dierkes_Buyken_Landberg_Alten_Spielau_Rosendahl-Riise_2025, title={Bread, wholegrain consumption and weight change from middle to late adulthood: a prospective cohort study. }, volume={64}, number={5}, journal={Eur J Nutr}, author={Revheim, I and Sabir, Z and Dierkes, J and Buyken, Anette and Landberg, R and Alten, I and Spielau, U and Rosendahl-Riise, H}, year={2025}, pages={197} }","apa":"Revheim, I., Sabir, Z., Dierkes, J., Buyken, A., Landberg, R., Alten, I., Spielau, U., &#38; Rosendahl-Riise, H. (2025). Bread, wholegrain consumption and weight change from middle to late adulthood: a prospective cohort study. . <i>Eur J Nutr</i>, <i>64</i>(5), 197.","ieee":"I. Revheim <i>et al.</i>, “Bread, wholegrain consumption and weight change from middle to late adulthood: a prospective cohort study. ,” <i>Eur J Nutr</i>, vol. 64, no. 5, p. 197, 2025.","chicago":"Revheim, I, Z Sabir, J Dierkes, Anette Buyken, R Landberg, I Alten, U Spielau, and H Rosendahl-Riise. “Bread, Wholegrain Consumption and Weight Change from Middle to Late Adulthood: A Prospective Cohort Study. .” <i>Eur J Nutr</i> 64, no. 5 (2025): 197.","short":"I. Revheim, Z. Sabir, J. Dierkes, A. Buyken, R. Landberg, I. Alten, U. Spielau, H. Rosendahl-Riise, Eur J Nutr 64 (2025) 197."},"issue":"5","publication":"Eur J Nutr","language":[{"iso":"eng"}],"_id":"60187","page":"197","volume":64,"user_id":"92491","pmid":"1","author":[{"full_name":"Revheim, I","last_name":"Revheim","first_name":"I"},{"full_name":"Sabir, Z","last_name":"Sabir","first_name":"Z"},{"first_name":"J","last_name":"Dierkes","full_name":"Dierkes, J"},{"id":"65985","first_name":"Anette","last_name":"Buyken","full_name":"Buyken, Anette"},{"first_name":"R","last_name":"Landberg","full_name":"Landberg, R"},{"full_name":"Alten, I","first_name":"I","last_name":"Alten"},{"last_name":"Spielau","first_name":"U","full_name":"Spielau, U"},{"last_name":"Rosendahl-Riise","first_name":"H","full_name":"Rosendahl-Riise, H"}],"publication_identifier":{"issn":["1436-6207","1436-6215"]},"title":"Bread, wholegrain consumption and weight change from middle to late adulthood: a prospective cohort study. ","status":"public","year":"2025","intvolume":"        64","date_updated":"2025-06-11T08:56:45Z"},{"type":"journal_article","department":[{"_id":"22"}],"external_id":{"pmid":["40101167"]},"date_created":"2025-06-11T08:48:08Z","publication":"Scand J Work Environ Health","citation":{"mla":"Dannheim, I., et al. “Effectiveness of Leader-Targeted Stress Management Interventions: A Systematic Review and Meta-Analysis.” <i>Scand J Work Environ Health</i>, 2025, p. 4219.","ama":"Dannheim I, Ludwig-Walz H, Kirsch H, et al. Effectiveness of leader-targeted stress management interventions: A systematic review and meta-analysis. <i>Scand J Work Environ Health</i>. Published online 2025:4219.","bibtex":"@article{Dannheim_Ludwig-Walz_Kirsch_Bujard_Buyken_Richardson_Kroke_2025, title={Effectiveness of leader-targeted stress management interventions: A systematic review and meta-analysis.}, journal={Scand J Work Environ Health}, author={Dannheim, I and Ludwig-Walz, H and Kirsch, H and Bujard, M and Buyken, Anette and Richardson, KM and Kroke, A}, year={2025}, pages={4219} }","apa":"Dannheim, I., Ludwig-Walz, H., Kirsch, H., Bujard, M., Buyken, A., Richardson, K., &#38; Kroke, A. (2025). Effectiveness of leader-targeted stress management interventions: A systematic review and meta-analysis. <i>Scand J Work Environ Health</i>, 4219.","ieee":"I. Dannheim <i>et al.</i>, “Effectiveness of leader-targeted stress management interventions: A systematic review and meta-analysis.,” <i>Scand J Work Environ Health</i>, p. 4219, 2025.","chicago":"Dannheim, I, H Ludwig-Walz, H Kirsch, M Bujard, Anette Buyken, KM Richardson, and A Kroke. “Effectiveness of Leader-Targeted Stress Management Interventions: A Systematic Review and Meta-Analysis.” <i>Scand J Work Environ Health</i>, 2025, 4219.","short":"I. Dannheim, H. Ludwig-Walz, H. Kirsch, M. Bujard, A. Buyken, K. Richardson, A. Kroke, Scand J Work Environ Health (2025) 4219."},"pmid":"1","user_id":"92491","page":"4219","_id":"60181","language":[{"iso":"eng"}],"date_updated":"2025-06-11T08:48:49Z","status":"public","title":"Effectiveness of leader-targeted stress management interventions: A systematic review and meta-analysis.","year":"2025","author":[{"full_name":"Dannheim, I","first_name":"I","last_name":"Dannheim"},{"full_name":"Ludwig-Walz, H","last_name":"Ludwig-Walz","first_name":"H"},{"full_name":"Kirsch, H","last_name":"Kirsch","first_name":"H"},{"full_name":"Bujard, M","last_name":"Bujard","first_name":"M"},{"id":"65985","full_name":"Buyken, Anette","last_name":"Buyken","first_name":"Anette"},{"last_name":"Richardson","first_name":"KM","full_name":"Richardson, KM"},{"first_name":"A","last_name":"Kroke","full_name":"Kroke, A"}],"publication_identifier":{"issn":["0355-3140","1795-990x"]}},{"citation":{"bibtex":"@article{Thiele_Lamberty_Hummel_Lange_Procopio Peña_Barua_Lengeling_Quiring_Eigner_Silberhorn_et al._2025, title={Cryogenic feedforward of a photonic quantum state}, volume={12}, DOI={<a href=\"https://doi.org/10.1364/optica.551287\">10.1364/optica.551287</a>}, number={5720}, journal={Optica}, publisher={Optica Publishing Group}, author={Thiele, Frederik and Lamberty, Niklas and Hummel, Thomas and Lange, Nina Amelie and Procopio Peña, Lorenzo Manuel and Barua, Aishi and Lengeling, Sebastian and Quiring, Viktor and Eigner, Christof and Silberhorn, Christine and et al.}, year={2025} }","ama":"Thiele F, Lamberty N, Hummel T, et al. Cryogenic feedforward of a photonic quantum state. <i>Optica</i>. 2025;12(5). doi:<a href=\"https://doi.org/10.1364/optica.551287\">10.1364/optica.551287</a>","mla":"Thiele, Frederik, et al. “Cryogenic Feedforward of a Photonic Quantum State.” <i>Optica</i>, vol. 12, no. 5, 720, Optica Publishing Group, 2025, doi:<a href=\"https://doi.org/10.1364/optica.551287\">10.1364/optica.551287</a>.","short":"F. Thiele, N. Lamberty, T. Hummel, N.A. Lange, L.M. Procopio Peña, A. Barua, S. Lengeling, V. Quiring, C. Eigner, C. Silberhorn, T. Bartley, Optica 12 (2025).","chicago":"Thiele, Frederik, Niklas Lamberty, Thomas Hummel, Nina Amelie Lange, Lorenzo Manuel Procopio Peña, Aishi Barua, Sebastian Lengeling, et al. “Cryogenic Feedforward of a Photonic Quantum State.” <i>Optica</i> 12, no. 5 (2025). <a href=\"https://doi.org/10.1364/optica.551287\">https://doi.org/10.1364/optica.551287</a>.","ieee":"F. Thiele <i>et al.</i>, “Cryogenic feedforward of a photonic quantum state,” <i>Optica</i>, vol. 12, no. 5, Art. no. 720, 2025, doi: <a href=\"https://doi.org/10.1364/optica.551287\">10.1364/optica.551287</a>.","apa":"Thiele, F., Lamberty, N., Hummel, T., Lange, N. A., Procopio Peña, L. M., Barua, A., Lengeling, S., Quiring, V., Eigner, C., Silberhorn, C., &#38; Bartley, T. (2025). Cryogenic feedforward of a photonic quantum state. <i>Optica</i>, <i>12</i>(5), Article 720. <a href=\"https://doi.org/10.1364/optica.551287\">https://doi.org/10.1364/optica.551287</a>"},"status":"public","publisher":"Optica Publishing Group","_id":"60136","user_id":"56843","volume":12,"publication":"Optica","issue":"5","abstract":[{"lang":"eng","text":"<jats:p>Modulation conditioned on measurements on entangled photonic quantum states is a cornerstone technology of optical quantum information processing. Performing this task with low latency requires combining single-photon-level detectors with both electronic logic processing and optical modulation in close proximity. Here, we demonstrate low-latency feedforward using a quasi-photon-number-resolved measurement on a quantum light source. Specifically, we use a multipixel superconducting nanowire single-photon detector, amplifier, logic, and an integrated electro-optic modulator <jats:italic toggle=\"yes\">in situ</jats:italic> below 4 K. We modulate the signal mode of a spontaneous parametric down-conversion source, conditional on a photon-number measurement of the idler mode, with a total latency of (23±3)ns. Furthermore, we investigate the resulting change in the photon statistics. This represents an important benchmark for the fastest quantum photonic feedforward experiments comprising measurement, amplification, logic, and modulation. This has direct applications in quantum computing, communication, and simulation protocols.</jats:p>"}],"date_created":"2025-06-04T18:34:16Z","type":"journal_article","title":"Cryogenic feedforward of a photonic quantum state","year":"2025","author":[{"first_name":"Frederik","orcid":"0000-0003-0663-5587","last_name":"Thiele","full_name":"Thiele, Frederik","id":"50819"},{"last_name":"Lamberty","first_name":"Niklas","full_name":"Lamberty, Niklas","id":"75307"},{"id":"83846","last_name":"Hummel","first_name":"Thomas","orcid":"0000-0001-8627-2119","full_name":"Hummel, Thomas"},{"first_name":"Nina Amelie","last_name":"Lange","orcid":"0000-0001-6624-7098","full_name":"Lange, Nina Amelie","id":"56843"},{"id":"105816","full_name":"Procopio Peña, Lorenzo Manuel","first_name":"Lorenzo Manuel","last_name":"Procopio Peña"},{"id":"104502","full_name":"Barua, Aishi","first_name":"Aishi","last_name":"Barua"},{"id":"44373","full_name":"Lengeling, Sebastian","last_name":"Lengeling","first_name":"Sebastian"},{"full_name":"Quiring, Viktor","last_name":"Quiring","first_name":"Viktor"},{"id":"13244","first_name":"Christof","orcid":"https://orcid.org/0000-0002-5693-3083","last_name":"Eigner","full_name":"Eigner, Christof"},{"id":"26263","first_name":"Christine","last_name":"Silberhorn","full_name":"Silberhorn, Christine"},{"full_name":"Bartley, Tim","last_name":"Bartley","first_name":"Tim","id":"49683"}],"publication_identifier":{"issn":["2334-2536"]},"publication_status":"published","date_updated":"2025-06-12T09:56:47Z","intvolume":"        12","article_number":"720","language":[{"iso":"eng"}],"doi":"10.1364/optica.551287"},{"quality_controlled":"1","citation":{"ieee":"R. Lehberger, “Emotionsreflexion als Element universitären Lehrens und Lernens Emotional reflection as an element of university teaching and learning,” <i>Zeitschrift für Hochschulentwicklung</i>, vol. 20, no. 1, 2025, doi: <a href=\"https://doi.org/10.21240/zfhe/20-1/22\">10.21240/zfhe/20-1/22</a>.","apa":"Lehberger, R. (2025). Emotionsreflexion als Element universitären Lehrens und Lernens Emotional reflection as an element of university teaching and learning. <i>Zeitschrift für Hochschulentwicklung</i>, <i>20</i>(1). <a href=\"https://doi.org/10.21240/zfhe/20-1/22\">https://doi.org/10.21240/zfhe/20-1/22</a>","chicago":"Lehberger, Regine. “Emotionsreflexion als Element universitären Lehrens und Lernens Emotional reflection as an element of university teaching and learning.” <i>Zeitschrift für Hochschulentwicklung</i> 20, no. 1 (2025). <a href=\"https://doi.org/10.21240/zfhe/20-1/22\">https://doi.org/10.21240/zfhe/20-1/22</a>.","short":"R. Lehberger, Zeitschrift für Hochschulentwicklung 20 (2025).","mla":"Lehberger, Regine. “Emotionsreflexion als Element universitären Lehrens und Lernens Emotional reflection as an element of university teaching and learning.” <i>Zeitschrift für Hochschulentwicklung</i>, vol. 20, no. 1, OAPublishing Collective, 2025, doi:<a href=\"https://doi.org/10.21240/zfhe/20-1/22\">10.21240/zfhe/20-1/22</a>.","bibtex":"@article{Lehberger_2025, title={Emotionsreflexion als Element universitären Lehrens und Lernens Emotional reflection as an element of university teaching and learning}, volume={20}, DOI={<a href=\"https://doi.org/10.21240/zfhe/20-1/22\">10.21240/zfhe/20-1/22</a>}, number={1}, journal={Zeitschrift für Hochschulentwicklung}, publisher={OAPublishing Collective}, author={Lehberger, Regine}, year={2025} }","ama":"Lehberger R. Emotionsreflexion als Element universitären Lehrens und Lernens Emotional reflection as an element of university teaching and learning. <i>Zeitschrift für Hochschulentwicklung</i>. 2025;20(1). doi:<a href=\"https://doi.org/10.21240/zfhe/20-1/22\">10.21240/zfhe/20-1/22</a>"},"oa":"1","status":"public","volume":20,"user_id":"98966","publisher":"OAPublishing Collective","_id":"60174","abstract":[{"lang":"eng","text":"<jats:p>Fähigkeiten zur Wahrnehmung und Regulation von Emotionen sind von besonderer Relevanz für Studierende, da Fördermaßnahmen im Bereich der Emotionsregulation auch positive Effekte auf die Studienqualität, den Studienerfolg und die allgemeine Persönlichkeitsentwicklung haben können. Jedoch wird diesem Thema wenig Aufmerksamkeit geschenkt und hochschuldidaktisch steht die Gestaltung von kognitiven und inhaltsbezogenen Lernarrangements im Zentrum. Die Einbindung von Gelegenheiten zur Emotionsreflexion in die Lehre bietet eine niederschwellige Maßnahme zur Förderung emotionaler Kompetenzen, weshalb im vorliegenden Beitrag ein Instrument zur Umsetzung dieser Aufgabe vorgeschlagen wird.</jats:p>"}],"publication":"Zeitschrift für Hochschulentwicklung","issue":"1","keyword":["Emotionsreflexion","Studierende","Hochschullehre","Reflexion"],"type":"journal_article","date_created":"2025-06-11T08:03:35Z","intvolume":"        20","publication_status":"published","date_updated":"2025-06-16T12:41:37Z","author":[{"last_name":"Lehberger","orcid":"0009-0007-0289-0288","first_name":"Regine","full_name":"Lehberger, Regine","id":"98966"}],"publication_identifier":{"issn":["2219-6994"]},"year":"2025","title":"Emotionsreflexion als Element universitären Lehrens und Lernens Emotional reflection as an element of university teaching and learning","doi":"10.21240/zfhe/20-1/22","language":[{"iso":"ger"}],"main_file_link":[{"open_access":"1","url":"https://www.zfhe.at/index.php/zfhe/article/view/2141"}]},{"keyword":["Joining","Forming","Property adjustment"],"type":"journal_article","department":[{"_id":"630"}],"date_created":"2025-06-23T07:47:56Z","abstract":[{"text":"Non-rotationally symmetrical joints can have different properties that can be controlled by the joint orientation. This hypothesis is tested using a Reuleaux triangle joint geometry. A tool design is carried out, followed by a numerical sensitivity analysis of the tool geometry. Initial tools were manufactured for experimental investigations and then adapted based on the findings of the sensitivity analysis. The joints are characterized by micrographs, 3D scans, shear tensile tests, head tensile tests and three-point bending tests and compared with a round geometry. The analysis confirms the hypothesis. Thus, joints with adaptable properties can be produced with one tool set.","lang":"eng"}],"project":[{"name":"TRR 285: TRR 285:  Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen Prozessketten","_id":"130","grant_number":"418701707"},{"name":"TRR 285 - B: TRR 285 - Project Area B","_id":"132"},{"_id":"140","name":"TRR 285 – B01: TRR 285 - Subproject B01"}],"publication":"CIRP Annals","citation":{"chicago":"Steinfelder, Christian, Clemens Acksteiner, and Alexander Brosius. “A New Joint with Versatile Properties Based on a Reuleaux Triangle Geometry.” <i>CIRP Annals</i>, 2025. <a href=\"https://doi.org/10.1016/j.cirp.2025.03.002\">https://doi.org/10.1016/j.cirp.2025.03.002</a>.","short":"C. Steinfelder, C. Acksteiner, A. Brosius, CIRP Annals (2025).","ieee":"C. Steinfelder, C. Acksteiner, and A. Brosius, “A new joint with versatile properties based on a Reuleaux triangle geometry,” <i>CIRP Annals</i>, 2025, doi: <a href=\"https://doi.org/10.1016/j.cirp.2025.03.002\">10.1016/j.cirp.2025.03.002</a>.","apa":"Steinfelder, C., Acksteiner, C., &#38; Brosius, A. (2025). A new joint with versatile properties based on a Reuleaux triangle geometry. <i>CIRP Annals</i>. <a href=\"https://doi.org/10.1016/j.cirp.2025.03.002\">https://doi.org/10.1016/j.cirp.2025.03.002</a>","bibtex":"@article{Steinfelder_Acksteiner_Brosius_2025, title={A new joint with versatile properties based on a Reuleaux triangle geometry}, DOI={<a href=\"https://doi.org/10.1016/j.cirp.2025.03.002\">10.1016/j.cirp.2025.03.002</a>}, journal={CIRP Annals}, publisher={Elsevier BV}, author={Steinfelder, Christian and Acksteiner, Clemens and Brosius, Alexander}, year={2025} }","ama":"Steinfelder C, Acksteiner C, Brosius A. A new joint with versatile properties based on a Reuleaux triangle geometry. <i>CIRP Annals</i>. Published online 2025. doi:<a href=\"https://doi.org/10.1016/j.cirp.2025.03.002\">10.1016/j.cirp.2025.03.002</a>","mla":"Steinfelder, Christian, et al. “A New Joint with Versatile Properties Based on a Reuleaux Triangle Geometry.” <i>CIRP Annals</i>, Elsevier BV, 2025, doi:<a href=\"https://doi.org/10.1016/j.cirp.2025.03.002\">10.1016/j.cirp.2025.03.002</a>."},"user_id":"104464","doi":"10.1016/j.cirp.2025.03.002","_id":"60299","language":[{"iso":"eng"}],"publisher":"Elsevier BV","publication_status":"published","date_updated":"2025-06-23T08:00:05Z","title":"A new joint with versatile properties based on a Reuleaux triangle geometry","status":"public","year":"2025","publication_identifier":{"issn":["0007-8506"]},"author":[{"full_name":"Steinfelder, Christian","first_name":"Christian","last_name":"Steinfelder"},{"first_name":"Clemens","last_name":"Acksteiner","full_name":"Acksteiner, Clemens"},{"full_name":"Brosius, Alexander","first_name":"Alexander","last_name":"Brosius"}]},{"volume":14,"user_id":"459","publication_date":"01.03.2025","_id":"60336","language":[{"iso":"ger"}],"page":"49-63","intvolume":"        14","publication_status":"published","date_updated":"2025-06-23T10:49:05Z","author":[{"id":"459","full_name":"Schlegel-Matthies, Kirsten","last_name":"Schlegel-Matthies","first_name":"Kirsten"}],"publication_identifier":{"issn":["2193-8806"],"eissn":["2196-1662"]},"year":"2025","title":"Essen in der Vielfalt –   Esskultur und Nahrungszubereitung","status":"public","department":[{"_id":"35"},{"_id":"17"},{"_id":"22"},{"_id":"396"}],"type":"newspaper_article","date_created":"2025-06-23T10:48:51Z","citation":{"apa":"Schlegel-Matthies, K. (2025). Essen in der Vielfalt –   Esskultur und Nahrungszubereitung. <i>Haushalt in Bildung und Forschung</i>, <i>14</i>(1), 49–63.","ieee":"K. Schlegel-Matthies, “Essen in der Vielfalt –   Esskultur und Nahrungszubereitung,” <i>Haushalt in Bildung und Forschung</i>, vol. 14, no. 1, pp. 49–63, 2025.","chicago":"Schlegel-Matthies, Kirsten. “Essen in der Vielfalt –   Esskultur und Nahrungszubereitung.” <i>Haushalt in Bildung und Forschung</i>, 2025.","short":"K. Schlegel-Matthies, Haushalt in Bildung und Forschung 14 (2025) 49–63.","mla":"Schlegel-Matthies, Kirsten. “Essen in der Vielfalt –   Esskultur und Nahrungszubereitung.” <i>Haushalt in Bildung und Forschung</i>, vol. 14, no. 1, 2025, pp. 49–63.","ama":"Schlegel-Matthies K. Essen in der Vielfalt –   Esskultur und Nahrungszubereitung. <i>Haushalt in Bildung und Forschung</i>. 2025:49-63.","bibtex":"@article{Schlegel-Matthies_2025, title={Essen in der Vielfalt –   Esskultur und Nahrungszubereitung}, volume={14}, number={1}, journal={Haushalt in Bildung und Forschung}, author={Schlegel-Matthies, Kirsten}, year={2025}, pages={49–63} }"},"issue":"1","publication":"Haushalt in Bildung und Forschung"},{"publication":"J Eat Disord","issue":"1","citation":{"short":"N. Knoll-Pientka, D. Schils, K. Pasternak, S. Czarnetzky, C. Jansen, G. Gradl-Dietsch, J. Seitz, E. Skoda, L. Libuda, A. Schweda, M. Teufel, J Eat Disord 13 (2025) 87.","chicago":"Knoll-Pientka, N, D Schils, K Pasternak, S Czarnetzky, C Jansen, G Gradl-Dietsch, J Seitz, et al. “Can Bioelectrical Impedance Analysis Be Used to Identify Water Loading in Patients with Anorexia Nervosa?- Implications from Experimental Measurements in Young, Healthy, and Normal Weight Women.” <i>J Eat Disord</i> 13, no. 1 (2025): 87.","apa":"Knoll-Pientka, N., Schils, D., Pasternak, K., Czarnetzky, S., Jansen, C., Gradl-Dietsch, G., Seitz, J., Skoda, E., Libuda, L., Schweda, A., &#38; Teufel, M. (2025). Can bioelectrical impedance analysis be used to identify water loading in patients with anorexia nervosa?- Implications from experimental measurements in young, healthy, and normal weight women. <i>J Eat Disord</i>, <i>13</i>(1), 87.","ieee":"N. Knoll-Pientka <i>et al.</i>, “Can bioelectrical impedance analysis be used to identify water loading in patients with anorexia nervosa?- Implications from experimental measurements in young, healthy, and normal weight women.,” <i>J Eat Disord</i>, vol. 13, no. 1, p. 87, 2025.","ama":"Knoll-Pientka N, Schils D, Pasternak K, et al. Can bioelectrical impedance analysis be used to identify water loading in patients with anorexia nervosa?- Implications from experimental measurements in young, healthy, and normal weight women. <i>J Eat Disord</i>. 2025;13(1):87.","bibtex":"@article{Knoll-Pientka_Schils_Pasternak_Czarnetzky_Jansen_Gradl-Dietsch_Seitz_Skoda_Libuda_Schweda_et al._2025, title={Can bioelectrical impedance analysis be used to identify water loading in patients with anorexia nervosa?- Implications from experimental measurements in young, healthy, and normal weight women.}, volume={13}, number={1}, journal={J Eat Disord}, author={Knoll-Pientka, N and Schils, D and Pasternak, K and Czarnetzky, S and Jansen, C and Gradl-Dietsch, G and Seitz, J and Skoda, EM and Libuda, Lars and Schweda, A and et al.}, year={2025}, pages={87} }","mla":"Knoll-Pientka, N., et al. “Can Bioelectrical Impedance Analysis Be Used to Identify Water Loading in Patients with Anorexia Nervosa?- Implications from Experimental Measurements in Young, Healthy, and Normal Weight Women.” <i>J Eat Disord</i>, vol. 13, no. 1, 2025, p. 87."},"external_id":{"pmid":["40390023"]},"date_created":"2025-06-30T10:24:32Z","type":"journal_article","department":[{"_id":"35"},{"_id":"17"},{"_id":"22"}],"year":"2025","status":"public","title":"Can bioelectrical impedance analysis be used to identify water loading in patients with anorexia nervosa?- Implications from experimental measurements in young, healthy, and normal weight women.","author":[{"last_name":"Knoll-Pientka","first_name":"N","full_name":"Knoll-Pientka, N"},{"last_name":"Schils","first_name":"D","full_name":"Schils, D"},{"full_name":"Pasternak, K","last_name":"Pasternak","first_name":"K"},{"first_name":"S","last_name":"Czarnetzky","full_name":"Czarnetzky, S"},{"full_name":"Jansen, C","last_name":"Jansen","first_name":"C"},{"last_name":"Gradl-Dietsch","first_name":"G","full_name":"Gradl-Dietsch, G"},{"full_name":"Seitz, J","first_name":"J","last_name":"Seitz"},{"full_name":"Skoda, EM","first_name":"EM","last_name":"Skoda"},{"last_name":"Libuda","orcid":"0000-0003-1603-3133","first_name":"Lars","full_name":"Libuda, Lars","id":"88682"},{"full_name":"Schweda, A","first_name":"A","last_name":"Schweda"},{"last_name":"Teufel","first_name":"M","full_name":"Teufel, M"}],"publication_identifier":{"issn":["2050-2974"]},"date_updated":"2025-06-30T10:26:06Z","intvolume":"        13","page":"87","_id":"60471","language":[{"iso":"eng"}],"user_id":"88682","pmid":"1","volume":13},{"citation":{"mla":"Afsahnoudeh, Reza, et al. “Thermo-Hydraulic Performance of Pillow-Plate Heat Exchangers with Streamlined Secondary Structures: A Numerical Analysis.” <i>Systems and Control Transactions</i>, vol. 4, PSE Press, 2025, doi:<a href=\"https://doi.org/10.69997/sct.178665\">10.69997/sct.178665</a>.","bibtex":"@inproceedings{Afsahnoudeh_Riese_Kenig_2025, title={Thermo-Hydraulic Performance of Pillow-Plate Heat Exchangers with Streamlined Secondary Structures: A Numerical Analysis}, volume={4}, DOI={<a href=\"https://doi.org/10.69997/sct.178665\">10.69997/sct.178665</a>}, booktitle={Systems and Control Transactions}, publisher={PSE Press}, author={Afsahnoudeh, Reza and Riese, Julia and Kenig, Eugeny Y.}, year={2025} }","ama":"Afsahnoudeh R, Riese J, Kenig EY. Thermo-Hydraulic Performance of Pillow-Plate Heat Exchangers with Streamlined Secondary Structures: A Numerical Analysis. In: <i>Systems and Control Transactions</i>. Vol 4. PSE Press; 2025. doi:<a href=\"https://doi.org/10.69997/sct.178665\">10.69997/sct.178665</a>","ieee":"R. Afsahnoudeh, J. Riese, and E. Y. Kenig, “Thermo-Hydraulic Performance of Pillow-Plate Heat Exchangers with Streamlined Secondary Structures: A Numerical Analysis,” in <i>Systems and Control Transactions</i>, 2025, vol. 4, doi: <a href=\"https://doi.org/10.69997/sct.178665\">10.69997/sct.178665</a>.","apa":"Afsahnoudeh, R., Riese, J., &#38; Kenig, E. Y. (2025). Thermo-Hydraulic Performance of Pillow-Plate Heat Exchangers with Streamlined Secondary Structures: A Numerical Analysis. <i>Systems and Control Transactions</i>, <i>4</i>. <a href=\"https://doi.org/10.69997/sct.178665\">https://doi.org/10.69997/sct.178665</a>","chicago":"Afsahnoudeh, Reza, Julia Riese, and Eugeny Y. Kenig. “Thermo-Hydraulic Performance of Pillow-Plate Heat Exchangers with Streamlined Secondary Structures: A Numerical Analysis.” In <i>Systems and Control Transactions</i>, Vol. 4. PSE Press, 2025. <a href=\"https://doi.org/10.69997/sct.178665\">https://doi.org/10.69997/sct.178665</a>.","short":"R. Afsahnoudeh, J. Riese, E.Y. Kenig, in: Systems and Control Transactions, PSE Press, 2025."},"project":[{"_id":"52","name":"PC2: Computing Resources Provided by the Paderborn Center for Parallel Computing"}],"quality_controlled":"1","status":"public","_id":"60494","publisher":"PSE Press","volume":4,"user_id":"101499","publication":"Systems and Control Transactions","abstract":[{"text":"Pillow-plate heat exchangers (PPHEs) represent a viable alternative to conventional shell-and-tube and plate heat exchangers. The waviness of their channels intensifies fluid mixing in the boundary layers and facilitates heat transfer. Applying secondary surface structuring can further enhance the overall thermo-hydraulic performance of PPHEs, thus increasing their competitiveness against conventional heat exchangers. In this work, streamlined secondary structures applied on the PPHE surface were studied numerically to explore their potential in enhancing near-wall fluid mixing. Computational fluid dynamics (CFD) simulations of single-phase turbulent flow in the inner PPHE channel were performed and pressure drop, heat transfer coefficients, and overall thermo-hydraulic efficiency were determined. The simulation results clearly demonstrate a favourable influence of secondary structuring on the heat transfer performance of PPHEs.</jats:p>","lang":"eng"}],"date_created":"2025-07-02T07:56:12Z","department":[{"_id":"831"}],"type":"conference","publication_identifier":{"issn":["2818-4734"]},"author":[{"full_name":"Afsahnoudeh, Reza","last_name":"Afsahnoudeh","first_name":"Reza","orcid":"https://orcid.org/0009-0001-3161-8036","id":"90390"},{"id":"101499","full_name":"Riese, Julia","first_name":"Julia","orcid":"0000-0002-3053-0534","last_name":"Riese"},{"full_name":"Kenig, Eugeny Y.","last_name":"Kenig","first_name":"Eugeny Y."}],"title":"Thermo-Hydraulic Performance of Pillow-Plate Heat Exchangers with Streamlined Secondary Structures: A Numerical Analysis","year":"2025","intvolume":"         4","date_updated":"2025-07-02T07:57:08Z","publication_status":"published","language":[{"iso":"eng"}],"doi":"10.69997/sct.178665"}]