---
_id: '23173'
author:
- first_name: Bassem
full_name: Hassan, Bassem
last_name: Hassan
- first_name: Helene
full_name: Wassmann, Helene
last_name: Wassmann
- first_name: Alexander
full_name: Klaas, Alexander
last_name: Klaas
- first_name: Jan Henning
full_name: Kessler, Jan Henning
last_name: Kessler
citation:
ama: 'Hassan B, Wassmann H, Klaas A, Kessler JH. Cascaded Heterogeneous Simulations
for Analysis of Mechatronic Systems in Large Scale Transportation Scenarios. In:
Proceedings of the 2012 Emerging M&S Applications in Industry & Academia
Symposium, Spring Simulation Multiconference. ; 2012.'
apa: Hassan, B., Wassmann, H., Klaas, A., & Kessler, J. H. (2012). Cascaded
Heterogeneous Simulations for Analysis of Mechatronic Systems in Large Scale Transportation
Scenarios. In Proceedings of the 2012 Emerging M&S Applications in Industry
& Academia Symposium, Spring Simulation Multiconference.
bibtex: '@inproceedings{Hassan_Wassmann_Klaas_Kessler_2012, title={Cascaded Heterogeneous
Simulations for Analysis of Mechatronic Systems in Large Scale Transportation
Scenarios}, booktitle={Proceedings of the 2012 Emerging M&S Applications in
Industry & Academia Symposium, Spring Simulation Multiconference}, author={Hassan,
Bassem and Wassmann, Helene and Klaas, Alexander and Kessler, Jan Henning}, year={2012}
}'
chicago: Hassan, Bassem, Helene Wassmann, Alexander Klaas, and Jan Henning Kessler.
“Cascaded Heterogeneous Simulations for Analysis of Mechatronic Systems in Large
Scale Transportation Scenarios.” In Proceedings of the 2012 Emerging M&S
Applications in Industry & Academia Symposium, Spring Simulation Multiconference,
2012.
ieee: B. Hassan, H. Wassmann, A. Klaas, and J. H. Kessler, “Cascaded Heterogeneous
Simulations for Analysis of Mechatronic Systems in Large Scale Transportation
Scenarios,” in Proceedings of the 2012 Emerging M&S Applications in Industry
& Academia Symposium, Spring Simulation Multiconference, 2012.
mla: Hassan, Bassem, et al. “Cascaded Heterogeneous Simulations for Analysis of
Mechatronic Systems in Large Scale Transportation Scenarios.” Proceedings of
the 2012 Emerging M&S Applications in Industry & Academia Symposium, Spring
Simulation Multiconference, 2012.
short: 'B. Hassan, H. Wassmann, A. Klaas, J.H. Kessler, in: Proceedings of the 2012
Emerging M&S Applications in Industry & Academia Symposium, Spring Simulation
Multiconference, 2012.'
date_created: 2021-08-09T07:28:26Z
date_updated: 2022-01-06T06:55:47Z
department:
- _id: '153'
language:
- iso: eng
publication: Proceedings of the 2012 Emerging M&S Applications in Industry & Academia
Symposium, Spring Simulation Multiconference
status: public
title: Cascaded Heterogeneous Simulations for Analysis of Mechatronic Systems in Large
Scale Transportation Scenarios
type: conference
user_id: '24876'
year: '2012'
...
---
_id: '21680'
abstract:
- lang: eng
text: The costs of additive manufactured parts often seem too high in comparison
to those of traditionally manufactured parts, as the information about major cost
drivers, especially for additive manufactured metal parts, is weak. Therefore,
a lifecycle analysis of additive manufactured parts is needed to understand and
rate the cost drivers that act as the largest contributors to unit costs, and
to provide a focus for future cost reduction activities for the Additive Manufacturing
(AM) technology. A better understanding of the cost structure will help to compare
the AM costs with the opportunity costs of the classical manufacturing technologies
and will make it easier to justify the use of AM manufactured parts. This paper
will present work in progress and methodology based on a sample investigated with
business process analysis / simulation and activity based costing. In addition,
cost drivers associated with metal AM process will be rated.
author:
- first_name: C.
full_name: Lindemann, C.
last_name: Lindemann
- first_name: U.
full_name: Jahnke, U.
last_name: Jahnke
- first_name: M.
full_name: Moi, M.
last_name: Moi
- first_name: R.
full_name: Koch, R.
last_name: Koch
citation:
ama: 'Lindemann C, Jahnke U, Moi M, Koch R. Analyzing Product Lifecycle Costs for
a Better Understanding of Cost Drivers in Additve Manufacturing. In: 23rd Annual
International Solid Freeform Fabrication Symposium. Vol 23. ; 2012:177-188.
doi:http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-12-Lindemann.pdf'
apa: Lindemann, C., Jahnke, U., Moi, M., & Koch, R. (2012). Analyzing Product
Lifecycle Costs for a Better Understanding of Cost Drivers in Additve Manufacturing.
In 23rd Annual International Solid Freeform Fabrication Symposium (Vol.
23, pp. 177–188). http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-12-Lindemann.pdf
bibtex: '@inproceedings{Lindemann_Jahnke_Moi_Koch_2012, title={Analyzing Product
Lifecycle Costs for a Better Understanding of Cost Drivers in Additve Manufacturing},
volume={23}, DOI={http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-12-Lindemann.pdf},
booktitle={23rd Annual International Solid Freeform Fabrication Symposium}, author={Lindemann,
C. and Jahnke, U. and Moi, M. and Koch, R.}, year={2012}, pages={177–188} }'
chicago: Lindemann, C., U. Jahnke, M. Moi, and R. Koch. “Analyzing Product Lifecycle
Costs for a Better Understanding of Cost Drivers in Additve Manufacturing.” In
23rd Annual International Solid Freeform Fabrication Symposium, 23:177–88,
2012. http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-12-Lindemann.pdf.
ieee: C. Lindemann, U. Jahnke, M. Moi, and R. Koch, “Analyzing Product Lifecycle
Costs for a Better Understanding of Cost Drivers in Additve Manufacturing,” in
23rd Annual International Solid Freeform Fabrication Symposium, 2012, vol.
23, pp. 177–188.
mla: Lindemann, C., et al. “Analyzing Product Lifecycle Costs for a Better Understanding
of Cost Drivers in Additve Manufacturing.” 23rd Annual International Solid
Freeform Fabrication Symposium, vol. 23, 2012, pp. 177–88, doi:http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-12-Lindemann.pdf.
short: 'C. Lindemann, U. Jahnke, M. Moi, R. Koch, in: 23rd Annual International
Solid Freeform Fabrication Symposium, 2012, pp. 177–188.'
date_created: 2021-04-21T06:34:46Z
date_updated: 2022-01-06T06:55:10Z
department:
- _id: '144'
- _id: '219'
- _id: '624'
doi: http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-12-Lindemann.pdf
intvolume: ' 23'
language:
- iso: eng
page: 177-188
publication: 23rd Annual International Solid Freeform Fabrication Symposium
publication_identifier:
isbn:
- 1053-2153
status: public
title: Analyzing Product Lifecycle Costs for a Better Understanding of Cost Drivers
in Additve Manufacturing
type: conference
user_id: '55833'
volume: 23
year: '2012'
...
---
_id: '21757'
author:
- first_name: W. F.
full_name: Koning, W. F.
last_name: Koning
citation:
ama: 'Koning WF. Teaching 3D Computer Animation to Illustrators: The Instructor
as Translator and Technical Director. IEEE Computer Graphics and Applications.
2012;32(5):81-83. doi:10.1109/MCG.2012.106'
apa: 'Koning, W. F. (2012). Teaching 3D Computer Animation to Illustrators: The
Instructor as Translator and Technical Director. IEEE Computer Graphics and
Applications, 32(5), 81–83. https://doi.org/10.1109/MCG.2012.106'
bibtex: '@article{Koning_2012, title={Teaching 3D Computer Animation to Illustrators:
The Instructor as Translator and Technical Director}, volume={32}, DOI={10.1109/MCG.2012.106},
number={5}, journal={IEEE Computer Graphics and Applications}, publisher={IEEE},
author={Koning, W. F.}, year={2012}, pages={81–83} }'
chicago: 'Koning, W. F. “Teaching 3D Computer Animation to Illustrators: The Instructor
as Translator and Technical Director.” IEEE Computer Graphics and Applications
32, no. 5 (2012): 81–83. https://doi.org/10.1109/MCG.2012.106.'
ieee: 'W. F. Koning, “Teaching 3D Computer Animation to Illustrators: The Instructor
as Translator and Technical Director,” IEEE Computer Graphics and Applications,
vol. 32, no. 5, pp. 81–83, 2012.'
mla: 'Koning, W. F. “Teaching 3D Computer Animation to Illustrators: The Instructor
as Translator and Technical Director.” IEEE Computer Graphics and Applications,
vol. 32, no. 5, IEEE, 2012, pp. 81–83, doi:10.1109/MCG.2012.106.'
short: W.F. Koning, IEEE Computer Graphics and Applications 32 (2012) 81–83.
date_created: 2021-04-25T16:15:47Z
date_updated: 2022-01-06T06:55:13Z
department:
- _id: '65'
doi: 10.1109/MCG.2012.106
intvolume: ' 32'
issue: '5'
language:
- iso: eng
page: 81-83
publication: IEEE Computer Graphics and Applications
publisher: IEEE
status: public
title: 'Teaching 3D Computer Animation to Illustrators: The Instructor as Translator
and Technical Director'
type: journal_article
user_id: '14955'
volume: 32
year: '2012'
...
---
_id: '2178'
author:
- first_name: Sandra
full_name: Gesing, Sandra
last_name: Gesing
- first_name: Sonja
full_name: Herres-Pawlis, Sonja
last_name: Herres-Pawlis
- first_name: Georg
full_name: Birkenheuer, Georg
last_name: Birkenheuer
- first_name: André
full_name: Brinkmann, André
last_name: Brinkmann
- first_name: Richard
full_name: Grunzke, Richard
last_name: Grunzke
- first_name: Peter
full_name: Kacsuk, Peter
last_name: Kacsuk
- first_name: Oliver
full_name: Kohlbacher, Oliver
last_name: Kohlbacher
- first_name: Miklos
full_name: Kozlovszky, Miklos
last_name: Kozlovszky
- first_name: Jens
full_name: Krüger, Jens
last_name: Krüger
- first_name: Ralph
full_name: Müller-Pfefferkorn, Ralph
last_name: Müller-Pfefferkorn
- first_name: Patrick
full_name: Schäfer, Patrick
last_name: Schäfer
- first_name: Thomas
full_name: Steinke, Thomas
last_name: Steinke
citation:
ama: 'Gesing S, Herres-Pawlis S, Birkenheuer G, et al. A Science Gateway Getting
Ready for Serving the International Molecular Simulation Community. In: Proceedings
of Science. Vol PoS(EGICF12-EMITC2)050. ; 2012.'
apa: Gesing, S., Herres-Pawlis, S., Birkenheuer, G., Brinkmann, A., Grunzke, R.,
Kacsuk, P., … Steinke, T. (2012). A Science Gateway Getting Ready for Serving
the International Molecular Simulation Community. In Proceedings of Science
(Vol. PoS(EGICF12-EMITC2)050).
bibtex: '@inproceedings{Gesing_Herres-Pawlis_Birkenheuer_Brinkmann_Grunzke_Kacsuk_Kohlbacher_Kozlovszky_Krüger_Müller-Pfefferkorn_et
al._2012, title={A Science Gateway Getting Ready for Serving the International
Molecular Simulation Community}, volume={PoS(EGICF12-EMITC2)050}, booktitle={Proceedings
of Science}, author={Gesing, Sandra and Herres-Pawlis, Sonja and Birkenheuer,
Georg and Brinkmann, André and Grunzke, Richard and Kacsuk, Peter and Kohlbacher,
Oliver and Kozlovszky, Miklos and Krüger, Jens and Müller-Pfefferkorn, Ralph and
et al.}, year={2012} }'
chicago: Gesing, Sandra, Sonja Herres-Pawlis, Georg Birkenheuer, André Brinkmann,
Richard Grunzke, Peter Kacsuk, Oliver Kohlbacher, et al. “A Science Gateway Getting
Ready for Serving the International Molecular Simulation Community.” In Proceedings
of Science, Vol. PoS(EGICF12-EMITC2)050, 2012.
ieee: S. Gesing et al., “A Science Gateway Getting Ready for Serving the
International Molecular Simulation Community,” in Proceedings of Science,
2012, vol. PoS(EGICF12-EMITC2)050.
mla: Gesing, Sandra, et al. “A Science Gateway Getting Ready for Serving the International
Molecular Simulation Community.” Proceedings of Science, vol. PoS(EGICF12-EMITC2)050,
2012.
short: 'S. Gesing, S. Herres-Pawlis, G. Birkenheuer, A. Brinkmann, R. Grunzke, P.
Kacsuk, O. Kohlbacher, M. Kozlovszky, J. Krüger, R. Müller-Pfefferkorn, P. Schäfer,
T. Steinke, in: Proceedings of Science, 2012.'
date_created: 2018-04-03T09:15:35Z
date_updated: 2022-01-06T06:55:13Z
department:
- _id: '27'
publication: Proceedings of Science
status: public
title: A Science Gateway Getting Ready for Serving the International Molecular Simulation
Community
type: conference
user_id: '24135'
volume: PoS(EGICF12-EMITC2)050
year: '2012'
...
---
_id: '788'
author:
- first_name: Christian
full_name: Dannewitz, Christian
last_name: Dannewitz
- first_name: Matthias
full_name: Herlich, Matthias
last_name: Herlich
- first_name: Holger
full_name: Karl, Holger
id: '126'
last_name: Karl
citation:
ama: 'Dannewitz C, Herlich M, Karl H. OpenNetInf - prototyping an information-centric
Network Architecture. In: 37th Annual IEEE Conference on Local Computer Networks,
Workshop Proceedings, Clearwater Beach, FL, USA, October 22-25, 2012. ; 2012:1061--1069.
doi:10.1109/LCNW.2012.6424044'
apa: Dannewitz, C., Herlich, M., & Karl, H. (2012). OpenNetInf - prototyping
an information-centric Network Architecture. In 37th Annual IEEE Conference
on Local Computer Networks, Workshop Proceedings, Clearwater Beach, FL, USA, October
22-25, 2012 (pp. 1061--1069). https://doi.org/10.1109/LCNW.2012.6424044
bibtex: '@inproceedings{Dannewitz_Herlich_Karl_2012, title={OpenNetInf - prototyping
an information-centric Network Architecture}, DOI={10.1109/LCNW.2012.6424044},
booktitle={37th Annual IEEE Conference on Local Computer Networks, Workshop Proceedings,
Clearwater Beach, FL, USA, October 22-25, 2012}, author={Dannewitz, Christian
and Herlich, Matthias and Karl, Holger}, year={2012}, pages={1061--1069} }'
chicago: Dannewitz, Christian, Matthias Herlich, and Holger Karl. “OpenNetInf -
Prototyping an Information-Centric Network Architecture.” In 37th Annual IEEE
Conference on Local Computer Networks, Workshop Proceedings, Clearwater Beach,
FL, USA, October 22-25, 2012, 1061--1069, 2012. https://doi.org/10.1109/LCNW.2012.6424044.
ieee: C. Dannewitz, M. Herlich, and H. Karl, “OpenNetInf - prototyping an information-centric
Network Architecture,” in 37th Annual IEEE Conference on Local Computer Networks,
Workshop Proceedings, Clearwater Beach, FL, USA, October 22-25, 2012, 2012,
pp. 1061--1069.
mla: Dannewitz, Christian, et al. “OpenNetInf - Prototyping an Information-Centric
Network Architecture.” 37th Annual IEEE Conference on Local Computer Networks,
Workshop Proceedings, Clearwater Beach, FL, USA, October 22-25, 2012, 2012,
pp. 1061--1069, doi:10.1109/LCNW.2012.6424044.
short: 'C. Dannewitz, M. Herlich, H. Karl, in: 37th Annual IEEE Conference on Local
Computer Networks, Workshop Proceedings, Clearwater Beach, FL, USA, October 22-25,
2012, 2012, pp. 1061--1069.'
date_created: 2017-11-27T10:22:26Z
date_updated: 2022-01-06T07:03:47Z
department:
- _id: '75'
doi: 10.1109/LCNW.2012.6424044
page: 1061--1069
publication: 37th Annual IEEE Conference on Local Computer Networks, Workshop Proceedings,
Clearwater Beach, FL, USA, October 22-25, 2012
status: public
title: OpenNetInf - prototyping an information-centric Network Architecture
type: conference
user_id: '15572'
year: '2012'
...
---
_id: '790'
author:
- first_name: Martin
full_name: Dräxler, Martin
last_name: Dräxler
- first_name: Frederic
full_name: Beister, Frederic
last_name: Beister
- first_name: Stephan
full_name: Kruska, Stephan
last_name: Kruska
- first_name: J.
full_name: Aelken, J.
last_name: Aelken
- first_name: Holger
full_name: Karl, Holger
id: '126'
last_name: Karl
citation:
ama: 'Dräxler M, Beister F, Kruska S, Aelken J, Karl H. Using OMNeT++ for energy
optimization simulations in mobile core networks. In: International ICST Conference
on Simulation Tools and Techniques, SIMUTOOLS ’12, Sirmione-Desenzano, Italy,
March 19-23, 2012. ; 2012:157--165. doi:10.4108/icst.simutools.2012.247676'
apa: Dräxler, M., Beister, F., Kruska, S., Aelken, J., & Karl, H. (2012). Using
OMNeT++ for energy optimization simulations in mobile core networks. In International
ICST Conference on Simulation Tools and Techniques, SIMUTOOLS ’12, Sirmione-Desenzano,
Italy, March 19-23, 2012 (pp. 157--165). https://doi.org/10.4108/icst.simutools.2012.247676
bibtex: '@inproceedings{Dräxler_Beister_Kruska_Aelken_Karl_2012, title={Using OMNeT++
for energy optimization simulations in mobile core networks}, DOI={10.4108/icst.simutools.2012.247676},
booktitle={International ICST Conference on Simulation Tools and Techniques, SIMUTOOLS
’12, Sirmione-Desenzano, Italy, March 19-23, 2012}, author={Dräxler, Martin and
Beister, Frederic and Kruska, Stephan and Aelken, J. and Karl, Holger}, year={2012},
pages={157--165} }'
chicago: Dräxler, Martin, Frederic Beister, Stephan Kruska, J. Aelken, and Holger
Karl. “Using OMNeT++ for Energy Optimization Simulations in Mobile Core Networks.”
In International ICST Conference on Simulation Tools and Techniques, SIMUTOOLS
’12, Sirmione-Desenzano, Italy, March 19-23, 2012, 157--165, 2012. https://doi.org/10.4108/icst.simutools.2012.247676.
ieee: M. Dräxler, F. Beister, S. Kruska, J. Aelken, and H. Karl, “Using OMNeT++
for energy optimization simulations in mobile core networks,” in International
ICST Conference on Simulation Tools and Techniques, SIMUTOOLS ’12, Sirmione-Desenzano,
Italy, March 19-23, 2012, 2012, pp. 157--165.
mla: Dräxler, Martin, et al. “Using OMNeT++ for Energy Optimization Simulations
in Mobile Core Networks.” International ICST Conference on Simulation Tools
and Techniques, SIMUTOOLS ’12, Sirmione-Desenzano, Italy, March 19-23, 2012,
2012, pp. 157--165, doi:10.4108/icst.simutools.2012.247676.
short: 'M. Dräxler, F. Beister, S. Kruska, J. Aelken, H. Karl, in: International
ICST Conference on Simulation Tools and Techniques, SIMUTOOLS ’12, Sirmione-Desenzano,
Italy, March 19-23, 2012, 2012, pp. 157--165.'
date_created: 2017-11-27T10:22:26Z
date_updated: 2022-01-06T07:03:47Z
department:
- _id: '75'
doi: 10.4108/icst.simutools.2012.247676
page: 157--165
publication: International ICST Conference on Simulation Tools and Techniques, SIMUTOOLS
'12, Sirmione-Desenzano, Italy, March 19-23, 2012
status: public
title: Using OMNeT++ for energy optimization simulations in mobile core networks
type: conference
user_id: '15572'
year: '2012'
...
---
_id: '619'
abstract:
- lang: eng
text: 'Dynamics in networks is caused by a variety of reasons, like nodes moving
in 2D (or 3D) in multihop cellphone networks, joins and leaves in peer-to-peer
networks, evolution in social networks, and many others. In order to understand
such kinds of dynamics, and to design distributed algorithms that behave well
under dynamics, many ways to model dynamics are introduced and analyzed w.r.t.
correctness and eciency of distributed algorithms. In [16], Kuhn, Lynch, and Oshman
have introduced a very general, worst case type model of dynamics: The edge set
of the network may change arbitrarily from step to step, the only restriction
is that it is connected at all times and the set of nodes does not change. An
extended model demands that a xed connected subnetwork is maintained over each
time interval of length T (T-interval dynamics). They have presented, among others,
algorithms for counting the number of nodes under such general models of dynamics.In
this paper, we generalize their models and algorithms by adding random edge faults,
i.e., we consider fault-prone dynamic networks: We assume that an edge currently
existing may fail to transmit data with some probability p. We rst observe that
strong counting, i.e., each node knows the correct count and stops, is not possible
in a model with random edge faults. Our main two positive results are feasibility
and runtime bounds for weak counting, i.e., stopping is no longer required (but
still a correct count in each node), and for strong counting with an upper bound,
i.e., an upper bound N on n is known to all nodes.'
author:
- first_name: Philipp
full_name: Brandes, Philipp
last_name: Brandes
- first_name: Friedhelm
full_name: Meyer auf der Heide, Friedhelm
id: '15523'
last_name: Meyer auf der Heide
citation:
ama: 'Brandes P, Meyer auf der Heide F. Distributed Computing in Fault-Prone Dynamic
Networks. In: Proceedings of the 4th Workshop on Theoretical Aspects of Dynamic
Distributed Systems (TADDS). ICPS. ; 2012:9-14. doi:10.1145/2414815.2414818'
apa: Brandes, P., & Meyer auf der Heide, F. (2012). Distributed Computing in
Fault-Prone Dynamic Networks. In Proceedings of the 4th Workshop on Theoretical
Aspects of Dynamic Distributed Systems (TADDS) (pp. 9–14). https://doi.org/10.1145/2414815.2414818
bibtex: '@inproceedings{Brandes_Meyer auf der Heide_2012, series={ICPS}, title={Distributed
Computing in Fault-Prone Dynamic Networks}, DOI={10.1145/2414815.2414818},
booktitle={Proceedings of the 4th Workshop on Theoretical Aspects of Dynamic Distributed
Systems (TADDS)}, author={Brandes, Philipp and Meyer auf der Heide, Friedhelm},
year={2012}, pages={9–14}, collection={ICPS} }'
chicago: Brandes, Philipp, and Friedhelm Meyer auf der Heide. “Distributed Computing
in Fault-Prone Dynamic Networks.” In Proceedings of the 4th Workshop on Theoretical
Aspects of Dynamic Distributed Systems (TADDS), 9–14. ICPS, 2012. https://doi.org/10.1145/2414815.2414818.
ieee: P. Brandes and F. Meyer auf der Heide, “Distributed Computing in Fault-Prone
Dynamic Networks,” in Proceedings of the 4th Workshop on Theoretical Aspects
of Dynamic Distributed Systems (TADDS), 2012, pp. 9–14.
mla: Brandes, Philipp, and Friedhelm Meyer auf der Heide. “Distributed Computing
in Fault-Prone Dynamic Networks.” Proceedings of the 4th Workshop on Theoretical
Aspects of Dynamic Distributed Systems (TADDS), 2012, pp. 9–14, doi:10.1145/2414815.2414818.
short: 'P. Brandes, F. Meyer auf der Heide, in: Proceedings of the 4th Workshop
on Theoretical Aspects of Dynamic Distributed Systems (TADDS), 2012, pp. 9–14.'
date_created: 2017-10-17T12:42:52Z
date_updated: 2022-01-06T07:02:56Z
ddc:
- '040'
department:
- _id: '63'
doi: 10.1145/2414815.2414818
file:
- access_level: closed
content_type: application/pdf
creator: florida
date_created: 2018-03-15T06:47:15Z
date_updated: 2018-03-15T06:47:15Z
file_id: '1244'
file_name: 619-Brandes_MadHTADDS12_01.pdf
file_size: 346044
relation: main_file
success: 1
file_date_updated: 2018-03-15T06:47:15Z
has_accepted_license: '1'
page: 9-14
project:
- _id: '1'
name: SFB 901
- _id: '5'
name: SFB 901 - Subprojekt A1
- _id: '2'
name: SFB 901 - Project Area A
publication: Proceedings of the 4th Workshop on Theoretical Aspects of Dynamic Distributed
Systems (TADDS)
series_title: ICPS
status: public
title: Distributed Computing in Fault-Prone Dynamic Networks
type: conference
user_id: '15504'
year: '2012'
...
---
_id: '634'
author:
- first_name: Julian
full_name: Kratzmann, Julian
last_name: Kratzmann
citation:
ama: Kratzmann J. Analyse und Simulation von energieeffizienten Online-Scheduling
Algorithmen. Universität Paderborn; 2012.
apa: Kratzmann, J. (2012). Analyse und Simulation von energieeffizienten Online-Scheduling
Algorithmen. Universität Paderborn.
bibtex: '@book{Kratzmann_2012, title={Analyse und Simulation von energieeffizienten
Online-Scheduling Algorithmen}, publisher={Universität Paderborn}, author={Kratzmann,
Julian}, year={2012} }'
chicago: Kratzmann, Julian. Analyse und Simulation von energieeffizienten Online-Scheduling
Algorithmen. Universität Paderborn, 2012.
ieee: J. Kratzmann, Analyse und Simulation von energieeffizienten Online-Scheduling
Algorithmen. Universität Paderborn, 2012.
mla: Kratzmann, Julian. Analyse und Simulation von energieeffizienten Online-Scheduling
Algorithmen. Universität Paderborn, 2012.
short: J. Kratzmann, Analyse und Simulation von energieeffizienten Online-Scheduling
Algorithmen, Universität Paderborn, 2012.
date_created: 2017-10-17T12:42:55Z
date_updated: 2022-01-06T07:03:01Z
language:
- iso: ger
project:
- _id: '1'
name: SFB 901
- _id: '14'
name: SFB 901 - Subprojekt C2
- _id: '4'
name: SFB 901 - Project Area C
publisher: Universität Paderborn
status: public
title: Analyse und Simulation von energieeffizienten Online-Scheduling Algorithmen
type: bachelorsthesis
user_id: '477'
year: '2012'
...
---
_id: '4706'
abstract:
- lang: eng
text: Purpose – The purpose of this paper is to show how to employ complex event
processing (CEP) for the observation and management of business processes. It
proposes a conceptual architecture of BPM event producer, processor, and consumer
and describes technical implications for the application with standard software
in a perfect order scenario. Design/methodology/approach – The authors discuss
business process analytics as the technological background. The capabilities of
CEP in a BPM context are outlined an architecture design is proposed. A sophisticated
proof-of-concept demonstrates its applicability. Findings – The results overcome
the separation and data latency issues of process controlling, monitoring, and
simulation. Distinct analyses of past, present, and future blur into a holistic
real-time approach. The authors highlight the necessity for configurable event
producer in BPM engines, process event support in CEP engines, a common process
event format, connectors to visualizers, notifiers and return channels to the
BPM engine. Research limitations/implications – Further research will thoroughly
evaluate the approach in a variety of business settings. New concepts and standards
for the architecture's building blocks will be needed to improve maintainability
and operability. Practical implications – Managers learn how CEP can yield insights
into business processes' operations. The paper illustrates a path to overcome
inflexibility, latency, and missing feedback mechanisms of current process modeling
and control solutions. Software vendors might be interested in the conceptualization
and the described needs for further development. Originality/value – So far, there
is no commercial CEP-based BPM solution which facilitates a round trip from insight
to action as outlines. As major software vendors have begun developing solutions
(BPM/BPA solutions), this paper will stimulate a debate between research and practice
on suitable design and technology.
author:
- first_name: Christian
full_name: Janiesch, Christian
last_name: Janiesch
- first_name: Martin
full_name: Matzner, Martin
last_name: Matzner
- first_name: Oliver
full_name: Müller, Oliver
id: '72849'
last_name: Müller
citation:
ama: 'Janiesch C, Matzner M, Müller O. Beyond process monitoring: A proof-of-concept
of event-driven business activity management. Business Process Management Journal.
2012;(4):625--643. doi:10.1108/14637151211253765'
apa: 'Janiesch, C., Matzner, M., & Müller, O. (2012). Beyond process monitoring:
A proof-of-concept of event-driven business activity management. Business Process
Management Journal, (4), 625--643. https://doi.org/10.1108/14637151211253765'
bibtex: '@article{Janiesch_Matzner_Müller_2012, title={Beyond process monitoring:
A proof-of-concept of event-driven business activity management}, DOI={10.1108/14637151211253765},
number={4}, journal={Business Process Management Journal}, author={Janiesch, Christian
and Matzner, Martin and Müller, Oliver}, year={2012}, pages={625--643} }'
chicago: 'Janiesch, Christian, Martin Matzner, and Oliver Müller. “Beyond Process
Monitoring: A Proof-of-Concept of Event-Driven Business Activity Management.”
Business Process Management Journal, no. 4 (2012): 625--643. https://doi.org/10.1108/14637151211253765.'
ieee: 'C. Janiesch, M. Matzner, and O. Müller, “Beyond process monitoring: A proof-of-concept
of event-driven business activity management,” Business Process Management
Journal, no. 4, pp. 625--643, 2012.'
mla: 'Janiesch, Christian, et al. “Beyond Process Monitoring: A Proof-of-Concept
of Event-Driven Business Activity Management.” Business Process Management
Journal, no. 4, 2012, pp. 625--643, doi:10.1108/14637151211253765.'
short: C. Janiesch, M. Matzner, O. Müller, Business Process Management Journal (2012)
625--643.
date_created: 2018-10-12T08:36:51Z
date_updated: 2022-01-06T07:01:19Z
doi: 10.1108/14637151211253765
extern: '1'
issue: '4'
keyword:
- Architecture
- Business activity monitoring
- Business process management
- Business process re-engineering
- Complex event processing
- Computer software
- Standard software
page: 625--643
publication: Business Process Management Journal
publication_identifier:
isbn:
- '1020120096'
issn:
- '14637154'
status: public
title: 'Beyond process monitoring: A proof-of-concept of event-driven business activity
management'
type: journal_article
user_id: '72849'
year: '2012'
...
---
_id: '9784'
abstract:
- lang: eng
text: Piezoelectric inertia motors use the inertia of a body to drive it by means
of a friction contact in a series of small steps. These motors can operate in
``stick-slip'' or ``slip-slip'' mode, with the fundamental frequency of the driving
signal ranging from several Hertz to more than 100 kHz. To predict the motor characteristics,
a Coulomb friction model is sufficient in many cases, but numerical simulation
requires microscopic time steps. This contribution proposes a much faster simulation
technique using one evaluation per period of the excitation signal. The proposed
technique produces results very close to those of timestep simulation for ultrasonics
inertia motors and allows direct determination of the steady-state velocity of
an inertia motor from the motion profile of the driving part. Thus it is a useful
simulation technique which can be applied in both analysis and design of inertia
motors, especially for parameter studies and optimisation.
author:
- first_name: Matthias
full_name: Hunstig, Matthias
last_name: Hunstig
- first_name: Tobias
full_name: Hemsel, Tobias
last_name: Hemsel
- first_name: Walter
full_name: Sextro, Walter
last_name: Sextro
citation:
ama: 'Hunstig M, Hemsel T, Sextro W. An efficient simulation technique for high-frequency
piezoelectric inertia motors. In: Ultrasonics Symposium (IUS), 2012 IEEE International.
; 2012:277-280. doi:10.1109/ULTSYM.2012.0068'
apa: Hunstig, M., Hemsel, T., & Sextro, W. (2012). An efficient simulation technique
for high-frequency piezoelectric inertia motors. In Ultrasonics Symposium (IUS),
2012 IEEE International (pp. 277–280). https://doi.org/10.1109/ULTSYM.2012.0068
bibtex: '@inproceedings{Hunstig_Hemsel_Sextro_2012, title={An efficient simulation
technique for high-frequency piezoelectric inertia motors}, DOI={10.1109/ULTSYM.2012.0068},
booktitle={Ultrasonics Symposium (IUS), 2012 IEEE International}, author={Hunstig,
Matthias and Hemsel, Tobias and Sextro, Walter}, year={2012}, pages={277–280}
}'
chicago: Hunstig, Matthias, Tobias Hemsel, and Walter Sextro. “An Efficient Simulation
Technique for High-Frequency Piezoelectric Inertia Motors.” In Ultrasonics
Symposium (IUS), 2012 IEEE International, 277–80, 2012. https://doi.org/10.1109/ULTSYM.2012.0068.
ieee: M. Hunstig, T. Hemsel, and W. Sextro, “An efficient simulation technique for
high-frequency piezoelectric inertia motors,” in Ultrasonics Symposium (IUS),
2012 IEEE International, 2012, pp. 277–280.
mla: Hunstig, Matthias, et al. “An Efficient Simulation Technique for High-Frequency
Piezoelectric Inertia Motors.” Ultrasonics Symposium (IUS), 2012 IEEE International,
2012, pp. 277–80, doi:10.1109/ULTSYM.2012.0068.
short: 'M. Hunstig, T. Hemsel, W. Sextro, in: Ultrasonics Symposium (IUS), 2012
IEEE International, 2012, pp. 277–280.'
date_created: 2019-05-13T13:20:17Z
date_updated: 2022-01-06T07:04:20Z
department:
- _id: '151'
doi: 10.1109/ULTSYM.2012.0068
keyword:
- friction
- ultrasonic motors
- Coulomb friction model
- efficient simulation technique
- friction contact
- high-frequency piezoelectric inertia motor
- motor characteristics prediction
- numerical simulation
- slip-slip mode
- stick-slip mode
- time-step simulation
- ultrasonic inertia motor
- Acceleration
- Acoustics
- Actuators
- Computational modeling
- Friction
- Numerical models
- Steady-state
language:
- iso: eng
page: 277-280
publication: Ultrasonics Symposium (IUS), 2012 IEEE International
publication_identifier:
issn:
- 1948-5719
quality_controlled: '1'
status: public
title: An efficient simulation technique for high-frequency piezoelectric inertia
motors
type: conference
user_id: '55222'
year: '2012'
...
---
_id: '4114'
abstract:
- lang: eng
text: Two methods to create biomimetic anti-reflection nanostructures in ordinary
glass microscope object slides are presented. One technique is based on a nanosphere
lithography process combined with physical vapour deposition of nickel and reactive
ion etching (RIE). The other uses plasma induced dewetting of a smooth nickel
surface. The amount of reflected light was measured and a method to simulate the
reflectivity from an atomic force microscopy (AFM) topography scan of the glass
surface is presented. The reflectivity for visible light at normal incidence was
reduced to 20-50 % of the original value with both methods and the simulation
gives results in good agreement to the measurement.
article_type: original
author:
- first_name: Jörn
full_name: Achtelik, Jörn
last_name: Achtelik
- first_name: Ricarda M.
full_name: Kemper, Ricarda M.
last_name: Kemper
- first_name: Werner
full_name: Sievers, Werner
last_name: Sievers
- first_name: Jörg
full_name: Lindner, Jörg
last_name: Lindner
citation:
ama: Achtelik J, Kemper RM, Sievers W, Lindner J. Self-Organized Nanostructure Formation
for Anti-Reflection Glass Surfaces. MRS Proceedings. 2012;1389. doi:10.1557/opl.2012.491
apa: Achtelik, J., Kemper, R. M., Sievers, W., & Lindner, J. (2012). Self-Organized
Nanostructure Formation for Anti-Reflection Glass Surfaces. MRS Proceedings,
1389. https://doi.org/10.1557/opl.2012.491
bibtex: '@article{Achtelik_Kemper_Sievers_Lindner_2012, title={Self-Organized Nanostructure
Formation for Anti-Reflection Glass Surfaces}, volume={1389}, DOI={10.1557/opl.2012.491},
journal={MRS Proceedings}, publisher={Cambridge University Press (CUP)}, author={Achtelik,
Jörn and Kemper, Ricarda M. and Sievers, Werner and Lindner, Jörg}, year={2012}
}'
chicago: Achtelik, Jörn, Ricarda M. Kemper, Werner Sievers, and Jörg Lindner. “Self-Organized
Nanostructure Formation for Anti-Reflection Glass Surfaces.” MRS Proceedings
1389 (2012). https://doi.org/10.1557/opl.2012.491.
ieee: J. Achtelik, R. M. Kemper, W. Sievers, and J. Lindner, “Self-Organized Nanostructure
Formation for Anti-Reflection Glass Surfaces,” MRS Proceedings, vol. 1389,
2012.
mla: Achtelik, Jörn, et al. “Self-Organized Nanostructure Formation for Anti-Reflection
Glass Surfaces.” MRS Proceedings, vol. 1389, Cambridge University Press
(CUP), 2012, doi:10.1557/opl.2012.491.
short: J. Achtelik, R.M. Kemper, W. Sievers, J. Lindner, MRS Proceedings 1389 (2012).
conference:
end_date: 2011-12-02
location: Boston (USA)
name: MRS Fall Meeting 2011
start_date: 2011-11-28
date_created: 2018-08-23T13:29:50Z
date_updated: 2022-01-06T07:00:18Z
department:
- _id: '15'
- _id: '286'
doi: 10.1557/opl.2012.491
intvolume: ' 1389'
language:
- iso: eng
publication: MRS Proceedings
publication_identifier:
issn:
- 1946-4274
publication_status: published
publisher: Cambridge University Press (CUP)
status: public
title: Self-Organized Nanostructure Formation for Anti-Reflection Glass Surfaces
type: journal_article
user_id: '55706'
volume: 1389
year: '2012'
...
---
_id: '16696'
author:
- first_name: A.
full_name: Zanzottera, A.
last_name: Zanzottera
- first_name: G.
full_name: Mingotti, G.
last_name: Mingotti
- first_name: R.
full_name: Castelli, R.
last_name: Castelli
- first_name: M.
full_name: Dellnitz, M.
last_name: Dellnitz
citation:
ama: 'Zanzottera A, Mingotti G, Castelli R, Dellnitz M. Intersecting invariant manifolds
in spatial restricted three-body problems: Design and optimization of Earth-to-halo
transfers in the Sun–Earth–Moon scenario. Communications in Nonlinear Science
and Numerical Simulation. 2012:832-843. doi:10.1016/j.cnsns.2011.06.032'
apa: 'Zanzottera, A., Mingotti, G., Castelli, R., & Dellnitz, M. (2012). Intersecting
invariant manifolds in spatial restricted three-body problems: Design and optimization
of Earth-to-halo transfers in the Sun–Earth–Moon scenario. Communications in
Nonlinear Science and Numerical Simulation, 832–843. https://doi.org/10.1016/j.cnsns.2011.06.032'
bibtex: '@article{Zanzottera_Mingotti_Castelli_Dellnitz_2012, title={Intersecting
invariant manifolds in spatial restricted three-body problems: Design and optimization
of Earth-to-halo transfers in the Sun–Earth–Moon scenario}, DOI={10.1016/j.cnsns.2011.06.032},
journal={Communications in Nonlinear Science and Numerical Simulation}, author={Zanzottera,
A. and Mingotti, G. and Castelli, R. and Dellnitz, M.}, year={2012}, pages={832–843}
}'
chicago: 'Zanzottera, A., G. Mingotti, R. Castelli, and M. Dellnitz. “Intersecting
Invariant Manifolds in Spatial Restricted Three-Body Problems: Design and Optimization
of Earth-to-Halo Transfers in the Sun–Earth–Moon Scenario.” Communications
in Nonlinear Science and Numerical Simulation, 2012, 832–43. https://doi.org/10.1016/j.cnsns.2011.06.032.'
ieee: 'A. Zanzottera, G. Mingotti, R. Castelli, and M. Dellnitz, “Intersecting invariant
manifolds in spatial restricted three-body problems: Design and optimization of
Earth-to-halo transfers in the Sun–Earth–Moon scenario,” Communications in
Nonlinear Science and Numerical Simulation, pp. 832–843, 2012.'
mla: 'Zanzottera, A., et al. “Intersecting Invariant Manifolds in Spatial Restricted
Three-Body Problems: Design and Optimization of Earth-to-Halo Transfers in the
Sun–Earth–Moon Scenario.” Communications in Nonlinear Science and Numerical
Simulation, 2012, pp. 832–43, doi:10.1016/j.cnsns.2011.06.032.'
short: A. Zanzottera, G. Mingotti, R. Castelli, M. Dellnitz, Communications in Nonlinear
Science and Numerical Simulation (2012) 832–843.
date_created: 2020-04-16T10:56:56Z
date_updated: 2022-01-06T06:52:54Z
department:
- _id: '101'
doi: 10.1016/j.cnsns.2011.06.032
language:
- iso: eng
page: 832-843
publication: Communications in Nonlinear Science and Numerical Simulation
publication_identifier:
issn:
- 1007-5704
publication_status: published
status: public
title: 'Intersecting invariant manifolds in spatial restricted three-body problems:
Design and optimization of Earth-to-halo transfers in the Sun–Earth–Moon scenario'
type: journal_article
user_id: '15701'
year: '2012'
...
---
_id: '10650'
author:
- first_name: Denis
full_name: Dridger, Denis
last_name: Dridger
citation:
ama: Dridger D. Design and Implementation of a Nanophotonics Simulation Personality
for the Convey HC-1 Hybrid Core Computer. Paderborn University; 2012.
apa: Dridger, D. (2012). Design and Implementation of a Nanophotonics Simulation
Personality for the Convey HC-1 Hybrid Core Computer. Paderborn University.
bibtex: '@book{Dridger_2012, title={Design and Implementation of a Nanophotonics
Simulation Personality for the Convey HC-1 Hybrid Core Computer}, publisher={Paderborn
University}, author={Dridger, Denis}, year={2012} }'
chicago: Dridger, Denis. Design and Implementation of a Nanophotonics Simulation
Personality for the Convey HC-1 Hybrid Core Computer. Paderborn University,
2012.
ieee: D. Dridger, Design and Implementation of a Nanophotonics Simulation Personality
for the Convey HC-1 Hybrid Core Computer. Paderborn University, 2012.
mla: Dridger, Denis. Design and Implementation of a Nanophotonics Simulation
Personality for the Convey HC-1 Hybrid Core Computer. Paderborn University,
2012.
short: D. Dridger, Design and Implementation of a Nanophotonics Simulation Personality
for the Convey HC-1 Hybrid Core Computer, Paderborn University, 2012.
date_created: 2019-07-10T11:10:59Z
date_updated: 2022-01-06T06:50:49Z
department:
- _id: '78'
language:
- iso: eng
publisher: Paderborn University
status: public
title: Design and Implementation of a Nanophotonics Simulation Personality for the
Convey HC-1 Hybrid Core Computer
type: mastersthesis
user_id: '3118'
year: '2012'
...
---
_id: '12001'
author:
- first_name: David
full_name: Eckhoff, David
last_name: Eckhoff
- first_name: Christoph
full_name: Sommer, Christoph
id: '49154'
last_name: Sommer
orcid: 0000-0002-4336-7350
- first_name: Falko
full_name: Dressler, Falko
last_name: Dressler
citation:
ama: 'Eckhoff D, Sommer C, Dressler F. On the Necessity of Accurate IEEE 802.11P
Models for IVC Protocol Simulation. In: 2012 IEEE 75th Vehicular Technology
Conference (VTC Spring). ; 2012. doi:10.1109/vetecs.2012.6240064'
apa: Eckhoff, D., Sommer, C., & Dressler, F. (2012). On the Necessity of Accurate
IEEE 802.11P Models for IVC Protocol Simulation. In 2012 IEEE 75th Vehicular
Technology Conference (VTC Spring). https://doi.org/10.1109/vetecs.2012.6240064
bibtex: '@inproceedings{Eckhoff_Sommer_Dressler_2012, title={On the Necessity of
Accurate IEEE 802.11P Models for IVC Protocol Simulation}, DOI={10.1109/vetecs.2012.6240064},
booktitle={2012 IEEE 75th Vehicular Technology Conference (VTC Spring)}, author={Eckhoff,
David and Sommer, Christoph and Dressler, Falko}, year={2012} }'
chicago: Eckhoff, David, Christoph Sommer, and Falko Dressler. “On the Necessity
of Accurate IEEE 802.11P Models for IVC Protocol Simulation.” In 2012 IEEE
75th Vehicular Technology Conference (VTC Spring), 2012. https://doi.org/10.1109/vetecs.2012.6240064.
ieee: D. Eckhoff, C. Sommer, and F. Dressler, “On the Necessity of Accurate IEEE
802.11P Models for IVC Protocol Simulation,” in 2012 IEEE 75th Vehicular Technology
Conference (VTC Spring), 2012.
mla: Eckhoff, David, et al. “On the Necessity of Accurate IEEE 802.11P Models for
IVC Protocol Simulation.” 2012 IEEE 75th Vehicular Technology Conference (VTC
Spring), 2012, doi:10.1109/vetecs.2012.6240064.
short: 'D. Eckhoff, C. Sommer, F. Dressler, in: 2012 IEEE 75th Vehicular Technology
Conference (VTC Spring), 2012.'
date_created: 2019-07-18T09:52:38Z
date_updated: 2022-01-06T06:51:15Z
department:
- _id: '589'
doi: 10.1109/vetecs.2012.6240064
language:
- iso: eng
publication: 2012 IEEE 75th Vehicular Technology Conference (VTC Spring)
publication_identifier:
isbn:
- '9781467309905'
- '9781467309899'
- '9781467309882'
publication_status: published
status: public
title: On the Necessity of Accurate IEEE 802.11P Models for IVC Protocol Simulation
type: conference
user_id: '49154'
year: '2012'
...
---
_id: '12023'
author:
- first_name: Stefan
full_name: Joerer, Stefan
last_name: Joerer
- first_name: Christoph
full_name: Sommer, Christoph
id: '49154'
last_name: Sommer
orcid: 0000-0002-4336-7350
- first_name: Falko
full_name: Dressler, Falko
last_name: Dressler
citation:
ama: 'Joerer S, Sommer C, Dressler F. Toward reproducibility and comparability of
IVC simulation studies: a literature survey. IEEE Communications Magazine.
2012:82-88. doi:10.1109/mcom.2012.6316780'
apa: 'Joerer, S., Sommer, C., & Dressler, F. (2012). Toward reproducibility
and comparability of IVC simulation studies: a literature survey. IEEE Communications
Magazine, 82–88. https://doi.org/10.1109/mcom.2012.6316780'
bibtex: '@article{Joerer_Sommer_Dressler_2012, title={Toward reproducibility and
comparability of IVC simulation studies: a literature survey}, DOI={10.1109/mcom.2012.6316780},
journal={IEEE Communications Magazine}, author={Joerer, Stefan and Sommer, Christoph
and Dressler, Falko}, year={2012}, pages={82–88} }'
chicago: 'Joerer, Stefan, Christoph Sommer, and Falko Dressler. “Toward Reproducibility
and Comparability of IVC Simulation Studies: A Literature Survey.” IEEE Communications
Magazine, 2012, 82–88. https://doi.org/10.1109/mcom.2012.6316780.'
ieee: 'S. Joerer, C. Sommer, and F. Dressler, “Toward reproducibility and comparability
of IVC simulation studies: a literature survey,” IEEE Communications Magazine,
pp. 82–88, 2012.'
mla: 'Joerer, Stefan, et al. “Toward Reproducibility and Comparability of IVC Simulation
Studies: A Literature Survey.” IEEE Communications Magazine, 2012, pp.
82–88, doi:10.1109/mcom.2012.6316780.'
short: S. Joerer, C. Sommer, F. Dressler, IEEE Communications Magazine (2012) 82–88.
date_created: 2019-07-18T09:53:45Z
date_updated: 2022-01-06T06:51:15Z
department:
- _id: '589'
doi: 10.1109/mcom.2012.6316780
language:
- iso: eng
page: 82-88
publication: IEEE Communications Magazine
publication_identifier:
issn:
- 0163-6804
publication_status: published
status: public
title: 'Toward reproducibility and comparability of IVC simulation studies: a literature
survey'
type: journal_article
user_id: '49154'
year: '2012'
...
---
_id: '15985'
author:
- first_name: Corin
full_name: Reuter, Corin
last_name: Reuter
- first_name: Meike
full_name: Frantz, Meike
last_name: Frantz
- first_name: Christian
full_name: Lauter, Christian
last_name: Lauter
- first_name: Holger
full_name: Block, Holger
last_name: Block
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: 'Reuter C, Frantz M, Lauter C, Block H, Tröster T. Simulation and testing of
hybrid structures consisting of press-hardened steel and CFRP. In: ; 2012.'
apa: Reuter, C., Frantz, M., Lauter, C., Block, H., & Tröster, T. (2012). Simulation
and testing of hybrid structures consisting of press-hardened steel and CFRP.
Presented at the 1st International Conference on Mechanics of Nano, Micro and
Macro Composite Structures (ICNMMCS), Turin, Italy.
bibtex: '@inproceedings{Reuter_Frantz_Lauter_Block_Tröster_2012, title={Simulation
and testing of hybrid structures consisting of press-hardened steel and CFRP},
author={Reuter, Corin and Frantz, Meike and Lauter, Christian and Block, Holger
and Tröster, Thomas}, year={2012} }'
chicago: Reuter, Corin, Meike Frantz, Christian Lauter, Holger Block, and Thomas
Tröster. “Simulation and Testing of Hybrid Structures Consisting of Press-Hardened
Steel and CFRP,” 2012.
ieee: C. Reuter, M. Frantz, C. Lauter, H. Block, and T. Tröster, “Simulation and
testing of hybrid structures consisting of press-hardened steel and CFRP,” presented
at the 1st International Conference on Mechanics of Nano, Micro and Macro Composite
Structures (ICNMMCS), Turin, Italy, 2012.
mla: Reuter, Corin, et al. Simulation and Testing of Hybrid Structures Consisting
of Press-Hardened Steel and CFRP. 2012.
short: 'C. Reuter, M. Frantz, C. Lauter, H. Block, T. Tröster, in: 2012.'
conference:
end_date: 2012-06-20
location: Turin, Italy
name: 1st International Conference on Mechanics of Nano, Micro and Macro Composite
Structures (ICNMMCS)
start_date: 2012-06-18
date_created: 2020-02-24T08:48:14Z
date_updated: 2022-01-06T06:52:41Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: eng
project:
- _id: '52'
name: Computing Resources Provided by the Paderborn Center for Parallel Computing
status: public
title: Simulation and testing of hybrid structures consisting of press-hardened steel
and CFRP
type: conference
user_id: '72008'
year: '2012'
...
---
_id: '16238'
author:
- first_name: Frederik
full_name: Hankeln, Frederik
id: '6695'
last_name: Hankeln
- first_name: Rolf
full_name: Mahnken, Rolf
last_name: Mahnken
citation:
ama: 'Hankeln F, Mahnken R. Carbon Fibre Prepregs: Simulation of a Thermo-Mechanical-Chemical
Coupled Problem. PAMM. 2012:289-290. doi:10.1002/pamm.201210134'
apa: 'Hankeln, F., & Mahnken, R. (2012). Carbon Fibre Prepregs: Simulation of
a Thermo-Mechanical-Chemical Coupled Problem. PAMM, 289–290. https://doi.org/10.1002/pamm.201210134'
bibtex: '@article{Hankeln_Mahnken_2012, title={Carbon Fibre Prepregs: Simulation
of a Thermo-Mechanical-Chemical Coupled Problem}, DOI={10.1002/pamm.201210134},
journal={PAMM}, author={Hankeln, Frederik and Mahnken, Rolf}, year={2012}, pages={289–290}
}'
chicago: 'Hankeln, Frederik, and Rolf Mahnken. “Carbon Fibre Prepregs: Simulation
of a Thermo-Mechanical-Chemical Coupled Problem.” PAMM, 2012, 289–90. https://doi.org/10.1002/pamm.201210134.'
ieee: 'F. Hankeln and R. Mahnken, “Carbon Fibre Prepregs: Simulation of a Thermo-Mechanical-Chemical
Coupled Problem,” PAMM, pp. 289–290, 2012.'
mla: 'Hankeln, Frederik, and Rolf Mahnken. “Carbon Fibre Prepregs: Simulation of
a Thermo-Mechanical-Chemical Coupled Problem.” PAMM, 2012, pp. 289–90,
doi:10.1002/pamm.201210134.'
short: F. Hankeln, R. Mahnken, PAMM (2012) 289–290.
date_created: 2020-03-04T09:39:47Z
date_updated: 2022-01-06T06:52:46Z
doi: 10.1002/pamm.201210134
language:
- iso: eng
page: 289-290
publication: PAMM
publication_identifier:
issn:
- 1617-7061
publication_status: published
status: public
title: 'Carbon Fibre Prepregs: Simulation of a Thermo-Mechanical-Chemical Coupled
Problem'
type: journal_article
user_id: '6695'
year: '2012'
...
---
_id: '16408'
abstract:
- lang: eng
text: "We present a parallel rendering system for heterogeneous PC clusters to visualize
massive models. One single, powerful visualization node is supported by a group
of backend nodes with weak graphics performance. While the visualization node
renders the visible objects, the backend nodes asynchronously perform visibility
tests and supply the front end with visible scene objects. The visualization node
stores only currently visible objects in its memory, while the scene is distributed
among the backend nodes’ memory without redundancy. To efficiently compute the
occlusion tests in spite of that each backend node stores only a fraction of the
original geometry, we complete the scene by adding highly simplified versions
of the objects stored on other nodes. We test our system with 15 backend nodes.
It is able to render a ≈ 350,M polygons (≈ 8.5,GiB) large aircraft model with
20, to 30,fps and thus allows a walk-through in real-time.\r\n"
author:
- first_name: Tim
full_name: Suess, Tim
last_name: Suess
- first_name: Clemens
full_name: Koch, Clemens
last_name: Koch
- first_name: Claudius
full_name: Jähn, Claudius
last_name: Jähn
- first_name: Matthias
full_name: Fischer, Matthias
id: '146'
last_name: Fischer
- first_name: Friedhelm
full_name: Meyer auf der Heide, Friedhelm
id: '15523'
last_name: Meyer auf der Heide
citation:
ama: 'Suess T, Koch C, Jähn C, Fischer M, Meyer auf der Heide F. Asynchronous Occlusion
Culling on Heterogeneous PC Clusters for Distributed 3D Scenes. In: Advances
in Visual Computing. Vol 7431. Lecture Notes in Computer Science. ; 2012:502-512.
doi:10.1007/978-3-642-33179-4_48'
apa: Suess, T., Koch, C., Jähn, C., Fischer, M., & Meyer auf der Heide, F. (2012).
Asynchronous Occlusion Culling on Heterogeneous PC Clusters for Distributed 3D
Scenes. Advances in Visual Computing, 7431, 502–512. https://doi.org/10.1007/978-3-642-33179-4_48
bibtex: '@inproceedings{Suess_Koch_Jähn_Fischer_Meyer auf der Heide_2012, place={Berlin,
Heidelberg}, series={Lecture Notes in Computer Science}, title={Asynchronous Occlusion
Culling on Heterogeneous PC Clusters for Distributed 3D Scenes}, volume={7431},
DOI={10.1007/978-3-642-33179-4_48},
booktitle={Advances in Visual Computing}, author={Suess, Tim and Koch, Clemens
and Jähn, Claudius and Fischer, Matthias and Meyer auf der Heide, Friedhelm},
year={2012}, pages={502–512}, collection={Lecture Notes in Computer Science} }'
chicago: Suess, Tim, Clemens Koch, Claudius Jähn, Matthias Fischer, and Friedhelm
Meyer auf der Heide. “Asynchronous Occlusion Culling on Heterogeneous PC Clusters
for Distributed 3D Scenes.” In Advances in Visual Computing, 7431:502–12.
Lecture Notes in Computer Science. Berlin, Heidelberg, 2012. https://doi.org/10.1007/978-3-642-33179-4_48.
ieee: 'T. Suess, C. Koch, C. Jähn, M. Fischer, and F. Meyer auf der Heide, “Asynchronous
Occlusion Culling on Heterogeneous PC Clusters for Distributed 3D Scenes,” in
Advances in Visual Computing, 2012, vol. 7431, pp. 502–512, doi: 10.1007/978-3-642-33179-4_48.'
mla: Suess, Tim, et al. “Asynchronous Occlusion Culling on Heterogeneous PC Clusters
for Distributed 3D Scenes.” Advances in Visual Computing, vol. 7431, 2012,
pp. 502–12, doi:10.1007/978-3-642-33179-4_48.
short: 'T. Suess, C. Koch, C. Jähn, M. Fischer, F. Meyer auf der Heide, in: Advances
in Visual Computing, Berlin, Heidelberg, 2012, pp. 502–512.'
date_created: 2020-04-06T07:40:57Z
date_updated: 2022-01-06T06:52:50Z
department:
- _id: '63'
doi: 10.1007/978-3-642-33179-4_48
intvolume: ' 7431'
language:
- iso: eng
page: 502-512
place: Berlin, Heidelberg
publication: Advances in Visual Computing
publication_identifier:
isbn:
- '9783642331787'
- '9783642331794'
issn:
- 0302-9743
- 1611-3349
publication_status: published
series_title: Lecture Notes in Computer Science
status: public
title: Asynchronous Occlusion Culling on Heterogeneous PC Clusters for Distributed
3D Scenes
type: conference
user_id: '15415'
volume: 7431
year: '2012'
...
---
_id: '14002'
author:
- first_name: Jens
full_name: Rautenberg, Jens
last_name: Rautenberg
citation:
ama: 'Rautenberg J. Ein Wellenleiterbasiertes Verfahren Zur Bestimmung von Materialdaten
Für Die Realitätsnahe Simulation von Schallausbreitungsphänomenen Am Beispiel
Stark Absorbierender Kunststoffe. Paderborn: Elektrotechnik; 2012.'
apa: 'Rautenberg, J. (2012). Ein wellenleiterbasiertes Verfahren zur Bestimmung
von Materialdaten für die realitätsnahe Simulation von Schallausbreitungsphänomenen
am Beispiel stark absorbierender Kunststoffe. Paderborn: Elektrotechnik.'
bibtex: '@book{Rautenberg_2012, place={Paderborn}, title={Ein wellenleiterbasiertes
Verfahren zur Bestimmung von Materialdaten für die realitätsnahe Simulation von
Schallausbreitungsphänomenen am Beispiel stark absorbierender Kunststoffe}, publisher={Elektrotechnik},
author={Rautenberg, Jens}, year={2012} }'
chicago: 'Rautenberg, Jens. Ein Wellenleiterbasiertes Verfahren Zur Bestimmung
von Materialdaten Für Die Realitätsnahe Simulation von Schallausbreitungsphänomenen
Am Beispiel Stark Absorbierender Kunststoffe. Paderborn: Elektrotechnik, 2012.'
ieee: 'J. Rautenberg, Ein wellenleiterbasiertes Verfahren zur Bestimmung von
Materialdaten für die realitätsnahe Simulation von Schallausbreitungsphänomenen
am Beispiel stark absorbierender Kunststoffe. Paderborn: Elektrotechnik, 2012.'
mla: Rautenberg, Jens. Ein Wellenleiterbasiertes Verfahren Zur Bestimmung von
Materialdaten Für Die Realitätsnahe Simulation von Schallausbreitungsphänomenen
Am Beispiel Stark Absorbierender Kunststoffe. Elektrotechnik, 2012.
short: J. Rautenberg, Ein Wellenleiterbasiertes Verfahren Zur Bestimmung von Materialdaten
Für Die Realitätsnahe Simulation von Schallausbreitungsphänomenen Am Beispiel
Stark Absorbierender Kunststoffe, Elektrotechnik, Paderborn, 2012.
date_created: 2019-10-24T13:25:49Z
date_updated: 2022-01-06T06:51:49Z
department:
- _id: '49'
keyword:
- akustische Wellenleiter
- Kunststoffe
- Materialdatenbestimmung
- Transmissionsmessung
language:
- iso: eng
place: Paderborn
publisher: Elektrotechnik
status: public
title: Ein wellenleiterbasiertes Verfahren zur Bestimmung von Materialdaten für die
realitätsnahe Simulation von Schallausbreitungsphänomenen am Beispiel stark absorbierender
Kunststoffe
type: dissertation
user_id: '15911'
year: '2012'
...
---
_id: '14003'
abstract:
- lang: eng
text: Das Spektrum akustischer Wellenleiter zur Flüssig-keitscharakterisierung reicht
von der Seismologie und Geophysik mit Wellenleiterdimensionen von einigen km über
die zerstörungsfreie Prüfung bis hin zur Prozessmesstechnik mit Sensordimensio-nen
von wenigen mm. In diesem Beitrag wird ein phänomenologischer Weg zur Klassifizierung
der Wellenleiter entwickelt, wobei stets die Oberflä-chenauslenkungen an der Wellenleitergrenze
und die Anzahl der an der Wellenausbreitung beteiligten Moden Berücksichtigung
finden. Im weiteren Verlauf werden Möglichkeiten zur Modellierung, Simulation
und Messung multimodaler Wellenausbreitung im akustischen Wellenleiter gezeigt.
author:
- first_name: Jens
full_name: Rautenberg, Jens
last_name: Rautenberg
- first_name: Fabian
full_name: Bause, Fabian
last_name: Bause
- first_name: Bernd
full_name: Henning, Bernd
id: '213'
last_name: Henning
citation:
ama: Rautenberg J, Bause F, Henning B. Geführte akustische Wellen zur Flüssigkeitscharakterisierung.
Technisches Messen. 2012;79(3):135-142.
apa: Rautenberg, J., Bause, F., & Henning, B. (2012). Geführte akustische Wellen
zur Flüssigkeitscharakterisierung. Technisches Messen, 79(3), 135–142.
bibtex: '@article{Rautenberg_Bause_Henning_2012, title={Geführte akustische Wellen
zur Flüssigkeitscharakterisierung}, volume={79}, number={3}, journal={Technisches
Messen}, author={Rautenberg, Jens and Bause, Fabian and Henning, Bernd}, year={2012},
pages={135–142} }'
chicago: 'Rautenberg, Jens, Fabian Bause, and Bernd Henning. “Geführte Akustische
Wellen Zur Flüssigkeitscharakterisierung.” Technisches Messen 79, no. 3
(2012): 135–42.'
ieee: J. Rautenberg, F. Bause, and B. Henning, “Geführte akustische Wellen zur Flüssigkeitscharakterisierung,”
Technisches Messen, vol. 79, no. 3, pp. 135–142, 2012.
mla: Rautenberg, Jens, et al. “Geführte Akustische Wellen Zur Flüssigkeitscharakterisierung.”
Technisches Messen, vol. 79, no. 3, 2012, pp. 135–42.
short: J. Rautenberg, F. Bause, B. Henning, Technisches Messen 79 (2012) 135–142.
date_created: 2019-10-24T13:27:01Z
date_updated: 2022-01-06T06:51:49Z
department:
- _id: '49'
intvolume: ' 79'
issue: '3'
language:
- iso: eng
page: 135-142
publication: Technisches Messen
status: public
title: Geführte akustische Wellen zur Flüssigkeitscharakterisierung
type: journal_article
user_id: '15911'
volume: 79
year: '2012'
...