---
_id: '17422'
abstract:
- lang: eng
text: "Commercial software of material flow simulations has the ability to layout
the simulated models. Arranged equipment, such as conveyors or machines, includes
the need to model and determine motion paths for moving objects like forklifts
or automatically guided vehicles, so that the simulation framework is able to
navigate all vehicles across those motion paths. After analyzing first scenarios,
the user often carries out layout changes in the simulation model, e.g. moving,
adding or deleting equipment. However, those changes cause time consuming, additional
modeling of the motion paths for the user. Our motion planning algorithm reduces
these changes by automatically determining the motion paths for moving objects,
depending on an actual model layout without colliding with other objects. The
algorithm works on the basis of the virtual scene\x92s 3D-data used for the simulation
model\x92s visualization. We demonstrate the technique with a multi-floor building
example."
author:
- first_name: Matthias
full_name: Fischer, Matthias
id: '146'
last_name: Fischer
- first_name: Hendrik
full_name: Renken, Hendrik
last_name: Renken
- first_name: Christoph
full_name: Laroque, Christoph
last_name: Laroque
- first_name: Guido
full_name: Schaumann, Guido
last_name: Schaumann
- first_name: Wilhelm
full_name: Dangelmaier, Wilhelm
last_name: Dangelmaier
citation:
ama: 'Fischer M, Renken H, Laroque C, Schaumann G, Dangelmaier W. Automated 3D-motion
planning for ramps and stairs in intra-logistics material flow simulations. In:
Proceedings of the 2010 Winter Simulation Conference. ; 2010. doi:10.1109/wsc.2010.5678906'
apa: Fischer, M., Renken, H., Laroque, C., Schaumann, G., & Dangelmaier, W.
(2010). Automated 3D-motion planning for ramps and stairs in intra-logistics material
flow simulations. In Proceedings of the 2010 Winter Simulation Conference.
https://doi.org/10.1109/wsc.2010.5678906
bibtex: '@inproceedings{Fischer_Renken_Laroque_Schaumann_Dangelmaier_2010, title={Automated
3D-motion planning for ramps and stairs in intra-logistics material flow simulations},
DOI={10.1109/wsc.2010.5678906},
booktitle={Proceedings of the 2010 Winter Simulation Conference}, author={Fischer,
Matthias and Renken, Hendrik and Laroque, Christoph and Schaumann, Guido and Dangelmaier,
Wilhelm}, year={2010} }'
chicago: Fischer, Matthias, Hendrik Renken, Christoph Laroque, Guido Schaumann,
and Wilhelm Dangelmaier. “Automated 3D-Motion Planning for Ramps and Stairs in
Intra-Logistics Material Flow Simulations.” In Proceedings of the 2010 Winter
Simulation Conference, 2010. https://doi.org/10.1109/wsc.2010.5678906.
ieee: M. Fischer, H. Renken, C. Laroque, G. Schaumann, and W. Dangelmaier, “Automated
3D-motion planning for ramps and stairs in intra-logistics material flow simulations,”
in Proceedings of the 2010 Winter Simulation Conference, 2010.
mla: Fischer, Matthias, et al. “Automated 3D-Motion Planning for Ramps and Stairs
in Intra-Logistics Material Flow Simulations.” Proceedings of the 2010 Winter
Simulation Conference, 2010, doi:10.1109/wsc.2010.5678906.
short: 'M. Fischer, H. Renken, C. Laroque, G. Schaumann, W. Dangelmaier, in: Proceedings
of the 2010 Winter Simulation Conference, 2010.'
date_created: 2020-07-27T19:33:16Z
date_updated: 2022-01-06T06:53:11Z
department:
- _id: '63'
doi: 10.1109/wsc.2010.5678906
language:
- iso: eng
publication: Proceedings of the 2010 Winter Simulation Conference
publication_identifier:
isbn:
- '9781424498666'
publication_status: published
status: public
title: Automated 3D-motion planning for ramps and stairs in intra-logistics material
flow simulations
type: conference
user_id: '15415'
year: '2010'
...
---
_id: '19016'
abstract:
- lang: eng
text: Load balancing is an important requirement for the efficient execu-tion of
parallel numerical simulations. In particular when the simulation domainchanges
over time, the mapping of computational tasks to processors needs tobe modified accordingly. State-of-the-art libraries for this problem are basedon
graph repartitioning. They have a number of drawbacks, including the opti-mized
metric and the difficulty of parallelizing the popular repartitioning heuris-tic
Kernighan-Lin (KL).Here we further explore the very promising diffusion-based
graph partitioningalgorithm DIBAP (Meyerhenke et al., JPDC 69(9):750–761, 2009)
by adaptingDIBAP to the related problem of load balancing. Experiments with graph se-quences
that imitate adaptive numerical simulations demonstrate the applicabilityand high
quality of DIBAP for load balancing by repartitioning. Compared to thefaster state-of-the-art
repartitioners PARMETIS and parallel JOSTLE, DIBAP’ssolutions have partitions
with significantly fewer external edges and boundarynodes and the resulting average migration volume in the important maximumnorm
is also the best in most cases.We also prove that one of DIBAP’s key components
optimizes a relaxed versionof the minimum edge cut problem. Moreover, we hint
at a distributed algorithmbased on ideas used in DIBAP for clustering a virtual
P2P supercomputer.
author:
- first_name: Joachim
full_name: Gehweiler, Joachim
last_name: Gehweiler
- first_name: Henning
full_name: Meyerhenke, Henning
last_name: Meyerhenke
citation:
ama: 'Gehweiler J, Meyerhenke H. On Dynamic Graph Partitioning and Graph Clustering
using Diffusion. In: Dagstuhl Seminar Proceedings 10261: Algorithm Engineering.
; 2010.'
apa: 'Gehweiler, J., & Meyerhenke, H. (2010). On Dynamic Graph Partitioning
and Graph Clustering using Diffusion. In Dagstuhl Seminar Proceedings 10261:
Algorithm Engineering.'
bibtex: '@inproceedings{Gehweiler_Meyerhenke_2010, title={On Dynamic Graph Partitioning
and Graph Clustering using Diffusion}, booktitle={Dagstuhl Seminar Proceedings
10261: Algorithm Engineering}, author={Gehweiler, Joachim and Meyerhenke, Henning},
year={2010} }'
chicago: 'Gehweiler, Joachim, and Henning Meyerhenke. “On Dynamic Graph Partitioning
and Graph Clustering Using Diffusion.” In Dagstuhl Seminar Proceedings 10261:
Algorithm Engineering, 2010.'
ieee: 'J. Gehweiler and H. Meyerhenke, “On Dynamic Graph Partitioning and Graph
Clustering using Diffusion,” in Dagstuhl Seminar Proceedings 10261: Algorithm
Engineering, 2010.'
mla: 'Gehweiler, Joachim, and Henning Meyerhenke. “On Dynamic Graph Partitioning
and Graph Clustering Using Diffusion.” Dagstuhl Seminar Proceedings 10261:
Algorithm Engineering, 2010.'
short: 'J. Gehweiler, H. Meyerhenke, in: Dagstuhl Seminar Proceedings 10261: Algorithm
Engineering, 2010.'
date_created: 2020-09-04T10:45:47Z
date_updated: 2022-01-06T06:53:57Z
department:
- _id: '63'
language:
- iso: eng
publication: 'Dagstuhl Seminar Proceedings 10261: Algorithm Engineering'
related_material:
link:
- relation: confirmation
url: https://drops.dagstuhl.de/opus/volltexte/2010/2798/pdf/10261.MeyerhenkeHenning.Paper.2798.pdf
status: public
title: On Dynamic Graph Partitioning and Graph Clustering using Diffusion
type: conference
user_id: '15415'
year: '2010'
...
---
_id: '23858'
abstract:
- lang: eng
text: A large proportion of plastics today is compounded, which means the process
from refining a raw material to the processable material. For this process compounding
extruders are used which mostly involve tightly intermeshing, co-rotating twin
screw extruders. These extruders consist of two closely spaced screws which rotate
in the same direction and convey the raw material to the screw tip. These screws
are surrounded by several barrel modules which heat or cool the material. As the
whole design of the machine is modularly arranged the process behavior of a twin
screw extruder depends for the main part on the arrangement of the screw and the
barrel elements. Until today this arrangement and process optimization is conducted
by experienced engineers and with the help of trial-and-error methods. Furthermore,
theoretical models are used with which the behavior of the extruder is estimated.
As these models are mostly very complex they are only made available with the
realization in different software projects. One of the tools is called SIGMA.
Within this paper SIGMA is introduced as a software to optimize a twin screw extruder.
SIGMA supports the engineer already in the early stages of the extruder arrangement.
author:
- first_name: Nils
full_name: Kretzschmar, Nils
id: '15387'
last_name: Kretzschmar
- first_name: Volker
full_name: Schöppner, Volker
id: '20530'
last_name: Schöppner
citation:
ama: 'Kretzschmar N, Schöppner V. Simulating Tightly Intermeshing, Co-Rotating Twin
Screw Extruders with SIGMA. In: Proceedings of the 2010 Summer Computer Simulation
Conference. SCSC ’10. San Diego, CA, USA: Society for Computer Simulation
International; 2010:133–140.'
apa: 'Kretzschmar, N., & Schöppner, V. (2010). Simulating Tightly Intermeshing,
Co-Rotating Twin Screw Extruders with SIGMA. In Proceedings of the 2010 Summer
Computer Simulation Conference (pp. 133–140). San Diego, CA, USA: Society
for Computer Simulation International.'
bibtex: '@inproceedings{Kretzschmar_Schöppner_2010, place={San Diego, CA, USA},
series={SCSC ’10}, title={Simulating Tightly Intermeshing, Co-Rotating Twin Screw
Extruders with SIGMA}, booktitle={Proceedings of the 2010 Summer Computer Simulation
Conference}, publisher={Society for Computer Simulation International}, author={Kretzschmar,
Nils and Schöppner, Volker}, year={2010}, pages={133–140}, collection={SCSC ’10}
}'
chicago: 'Kretzschmar, Nils, and Volker Schöppner. “Simulating Tightly Intermeshing,
Co-Rotating Twin Screw Extruders with SIGMA.” In Proceedings of the 2010 Summer
Computer Simulation Conference, 133–140. SCSC ’10. San Diego, CA, USA: Society
for Computer Simulation International, 2010.'
ieee: N. Kretzschmar and V. Schöppner, “Simulating Tightly Intermeshing, Co-Rotating
Twin Screw Extruders with SIGMA,” in Proceedings of the 2010 Summer Computer
Simulation Conference, 2010, pp. 133–140.
mla: Kretzschmar, Nils, and Volker Schöppner. “Simulating Tightly Intermeshing,
Co-Rotating Twin Screw Extruders with SIGMA.” Proceedings of the 2010 Summer
Computer Simulation Conference, Society for Computer Simulation International,
2010, pp. 133–140.
short: 'N. Kretzschmar, V. Schöppner, in: Proceedings of the 2010 Summer Computer
Simulation Conference, Society for Computer Simulation International, San Diego,
CA, USA, 2010, pp. 133–140.'
date_created: 2021-09-07T10:31:48Z
date_updated: 2022-01-06T06:56:02Z
department:
- _id: '367'
keyword:
- process optimization
- polymer engineering
- compounding
- twin screw extruder
- simulation
language:
- iso: eng
page: 133–140
place: San Diego, CA, USA
publication: Proceedings of the 2010 Summer Computer Simulation Conference
publisher: Society for Computer Simulation International
series_title: SCSC '10
status: public
title: Simulating Tightly Intermeshing, Co-Rotating Twin Screw Extruders with SIGMA
type: conference
user_id: '15387'
year: '2010'
...
---
_id: '9744'
abstract:
- lang: eng
text: Direct ultrasound irradiation is advantageous to increase the efficiency of
the hydrothermal method which can be used for the production of piezoelectric
thin films and lead free piezoelectric ceramics. To apply ultrasound directly
to the process transducer prototypes were developed regarding the boundary conditions
of the hydrothermal method. LiNbO$_{3}$ and PIC 181 were proven as feasible materials
for high temperature resistant transducers ($\geq 200^\circ C$). Resistance of
the transducers horn against the corrosive mineralizer was achieved by using Hastelloy
C-22. The efficiency of the ultrasound assisted hydrothermal method depends on
the generated sound field. Impedance and sound field measurements have shown that
the sound field depends on the filling level and the position and design of the
transducer.
author:
- first_name: Peter
full_name: Bornmann, Peter
last_name: Bornmann
- first_name: Tobias
full_name: Hemsel, Tobias
id: '210'
last_name: Hemsel
- first_name: Walter
full_name: Littmann, Walter
last_name: Littmann
- first_name: Ryo
full_name: Ageba, Ryo
last_name: Ageba
- first_name: Yoishi
full_name: Kadota, Yoishi
last_name: Kadota
- first_name: Takeshi
full_name: Morita, Takeshi
last_name: Morita
citation:
ama: Bornmann P, Hemsel T, Littmann W, Ageba R, Kadota Y, Morita T. Ultrasonic Transducer
for the Hydrothermal Method. Journal of Korean Physical Society. 2010;57(4):1122.
doi:10.3938/jkps.57.1122
apa: Bornmann, P., Hemsel, T., Littmann, W., Ageba, R., Kadota, Y., & Morita,
T. (2010). Ultrasonic Transducer for the Hydrothermal Method. Journal of Korean
Physical Society, 57(4), 1122. https://doi.org/10.3938/jkps.57.1122
bibtex: '@article{Bornmann_Hemsel_Littmann_Ageba_Kadota_Morita_2010, title={Ultrasonic
Transducer for the Hydrothermal Method}, volume={57}, DOI={10.3938/jkps.57.1122},
number={4}, journal={Journal of Korean Physical Society}, author={Bornmann, Peter
and Hemsel, Tobias and Littmann, Walter and Ageba, Ryo and Kadota, Yoishi and
Morita, Takeshi}, year={2010}, pages={1122} }'
chicago: 'Bornmann, Peter, Tobias Hemsel, Walter Littmann, Ryo Ageba, Yoishi Kadota,
and Takeshi Morita. “Ultrasonic Transducer for the Hydrothermal Method.” Journal
of Korean Physical Society 57, no. 4 (2010): 1122. https://doi.org/10.3938/jkps.57.1122.'
ieee: P. Bornmann, T. Hemsel, W. Littmann, R. Ageba, Y. Kadota, and T. Morita, “Ultrasonic
Transducer for the Hydrothermal Method,” Journal of Korean Physical Society,
vol. 57, no. 4, p. 1122, 2010.
mla: Bornmann, Peter, et al. “Ultrasonic Transducer for the Hydrothermal Method.”
Journal of Korean Physical Society, vol. 57, no. 4, 2010, p. 1122, doi:10.3938/jkps.57.1122.
short: P. Bornmann, T. Hemsel, W. Littmann, R. Ageba, Y. Kadota, T. Morita, Journal
of Korean Physical Society 57 (2010) 1122.
date_created: 2019-05-13T09:37:56Z
date_updated: 2022-01-06T07:04:19Z
department:
- _id: '151'
doi: 10.3938/jkps.57.1122
intvolume: ' 57'
issue: '4'
keyword:
- High-temperature transducer
- Hydrothermal method
- Lithium-niobate transducer
language:
- iso: eng
page: '1122'
publication: Journal of Korean Physical Society
publication_identifier:
issn:
- 1948-5719
quality_controlled: '1'
status: public
title: Ultrasonic Transducer for the Hydrothermal Method
type: journal_article
user_id: '55222'
volume: 57
year: '2010'
...
---
_id: '9748'
abstract:
- lang: eng
text: For many technical applications it is necessary to avoid or to reduce vibrations.
Factors benefiting from vibration reduction are for example the durability of
the application, which is increased, as well as cost expenses and the level of
noise, which are both decreased. Rough, bolted interfaces are common in most machines
and can be used as damping devices with some effort. Perhaps in future such contact
surfaces could be used as damping devices at the interfaces of an automotive engine
or exhaust system. Nevertheless it is difficult to predict the effect of a change
in contact interface parameters on the dynamic behavior of the entire mechanical
system. Therefore a method for calculating the steady state behavior of elastic
multi-body systems was developed. The basis of this method is a finite element
model of each contacting unit. On each model a modal reduction is applied in order
to reduce the degrees of freedom. The method of Ritz and Galerkin is used to calculate
the frequency response functions of the reduced system including contact. This
method allows the calculation of the steady-state behavior of elastic multi-body
systems with rough, bolted contact interfaces, by taking the pre-stress of the
bolts, the roughness and the friction coefficient of the contacting surfaces as
parameters. In order to verify calculated results, a test stand was built. The
comparison of calculated and experimental results showed a satisfying correlation.
author:
- first_name: Johannes Sebastian
full_name: ' Hölzl, Johannes Sebastian'
last_name: ' Hölzl'
- first_name: Walter
full_name: Sextro, Walter
id: '21220'
last_name: Sextro
citation:
ama: Hölzl JS, Sextro W. Simulation of the Dynamical Behavior of Elastic Multi-Body
Systems with Bolted, Rough Contact Interfaces. SAE International Journal of
Passenger Cars- Mechanical Systems. 2010:929-935. doi:10.4271/2010-01-1422
apa: Hölzl, J. S., & Sextro, W. (2010). Simulation of the Dynamical Behavior
of Elastic Multi-Body Systems with Bolted, Rough Contact Interfaces. SAE International
Journal of Passenger Cars- Mechanical Systems, 929–935. https://doi.org/10.4271/2010-01-1422
bibtex: '@article{ Hölzl_Sextro_2010, title={Simulation of the Dynamical Behavior
of Elastic Multi-Body Systems with Bolted, Rough Contact Interfaces}, DOI={10.4271/2010-01-1422}, journal={SAE
International Journal of Passenger Cars- Mechanical Systems}, author={ Hölzl,
Johannes Sebastian and Sextro, Walter}, year={2010}, pages={929–935} }'
chicago: Hölzl, Johannes Sebastian, and Walter Sextro. “Simulation of the Dynamical
Behavior of Elastic Multi-Body Systems with Bolted, Rough Contact Interfaces.”
SAE International Journal of Passenger Cars- Mechanical Systems, 2010,
929–35. https://doi.org/10.4271/2010-01-1422.
ieee: J. S. Hölzl and W. Sextro, “Simulation of the Dynamical Behavior of Elastic
Multi-Body Systems with Bolted, Rough Contact Interfaces,” SAE International
Journal of Passenger Cars- Mechanical Systems, pp. 929–935, 2010.
mla: Hölzl, Johannes Sebastian, and Walter Sextro. “Simulation of the Dynamical
Behavior of Elastic Multi-Body Systems with Bolted, Rough Contact Interfaces.”
SAE International Journal of Passenger Cars- Mechanical Systems, 2010,
pp. 929–35, doi:10.4271/2010-01-1422.
short: J.S. Hölzl, W. Sextro, SAE International Journal of Passenger Cars- Mechanical
Systems (2010) 929–935.
date_created: 2019-05-13T09:49:24Z
date_updated: 2022-01-06T07:04:19Z
department:
- _id: '151'
doi: 10.4271/2010-01-1422
keyword:
- Automotive
language:
- iso: eng
page: 929-935
publication: SAE International Journal of Passenger Cars- Mechanical Systems
quality_controlled: '1'
status: public
title: Simulation of the Dynamical Behavior of Elastic Multi-Body Systems with Bolted,
Rough Contact Interfaces
type: journal_article
user_id: '55222'
year: '2010'
...
---
_id: '4194'
abstract:
- lang: eng
text: A heterojunction field-effect transistor (HFET) was fabricated of nonpolar
cubic AlGaN/GaN grown on Ar+ implanted 3C–SiC (001) by molecular beam epitaxy.
The device shows a clear field effect at positive bias voltages with V_th=0.6
V. The HFET output characteristics were calculated using ATLAS simulation program.
The electron channel at the cubic AlGaN/GaN interface was detected by room temperature
capacitance-voltage measurements.
article_number: '253501'
article_type: original
author:
- first_name: E.
full_name: Tschumak, E.
last_name: Tschumak
- first_name: R.
full_name: Granzner, R.
last_name: Granzner
- first_name: Jörg
full_name: Lindner, Jörg
id: '20797'
last_name: Lindner
- first_name: F.
full_name: Schwierz, F.
last_name: Schwierz
- first_name: K.
full_name: Lischka, K.
last_name: Lischka
- first_name: H.
full_name: Nagasawa, H.
last_name: Nagasawa
- first_name: M.
full_name: Abe, M.
last_name: Abe
- first_name: Donald
full_name: As, Donald
last_name: As
citation:
ama: Tschumak E, Granzner R, Lindner J, et al. Nonpolar cubic AlGaN/GaN heterojunction
field-effect transistor on Ar+ implanted 3C–SiC (001). Applied Physics Letters.
2010;96(25). doi:10.1063/1.3455066
apa: Tschumak, E., Granzner, R., Lindner, J., Schwierz, F., Lischka, K., Nagasawa,
H., … As, D. (2010). Nonpolar cubic AlGaN/GaN heterojunction field-effect transistor
on Ar+ implanted 3C–SiC (001). Applied Physics Letters, 96(25).
https://doi.org/10.1063/1.3455066
bibtex: '@article{Tschumak_Granzner_Lindner_Schwierz_Lischka_Nagasawa_Abe_As_2010,
title={Nonpolar cubic AlGaN/GaN heterojunction field-effect transistor on Ar+
implanted 3C–SiC (001)}, volume={96}, DOI={10.1063/1.3455066},
number={25253501}, journal={Applied Physics Letters}, publisher={AIP Publishing},
author={Tschumak, E. and Granzner, R. and Lindner, Jörg and Schwierz, F. and Lischka,
K. and Nagasawa, H. and Abe, M. and As, Donald}, year={2010} }'
chicago: Tschumak, E., R. Granzner, Jörg Lindner, F. Schwierz, K. Lischka, H. Nagasawa,
M. Abe, and Donald As. “Nonpolar Cubic AlGaN/GaN Heterojunction Field-Effect Transistor
on Ar+ Implanted 3C–SiC (001).” Applied Physics Letters 96, no. 25 (2010).
https://doi.org/10.1063/1.3455066.
ieee: E. Tschumak et al., “Nonpolar cubic AlGaN/GaN heterojunction field-effect
transistor on Ar+ implanted 3C–SiC (001),” Applied Physics Letters, vol.
96, no. 25, 2010.
mla: Tschumak, E., et al. “Nonpolar Cubic AlGaN/GaN Heterojunction Field-Effect
Transistor on Ar+ Implanted 3C–SiC (001).” Applied Physics Letters, vol.
96, no. 25, 253501, AIP Publishing, 2010, doi:10.1063/1.3455066.
short: E. Tschumak, R. Granzner, J. Lindner, F. Schwierz, K. Lischka, H. Nagasawa,
M. Abe, D. As, Applied Physics Letters 96 (2010).
date_created: 2018-08-28T11:56:08Z
date_updated: 2022-01-06T07:00:33Z
ddc:
- '530'
department:
- _id: '15'
- _id: '286'
doi: 10.1063/1.3455066
file:
- access_level: closed
content_type: application/pdf
creator: hclaudia
date_created: 2018-08-28T11:58:27Z
date_updated: 2018-08-28T11:58:27Z
file_id: '4195'
file_name: Non-polar cubic AlGaN-GaN HFET on Ar+ implanted 3C-SiC 001.pdf
file_size: 277385
relation: main_file
success: 1
file_date_updated: 2018-08-28T11:58:27Z
has_accepted_license: '1'
intvolume: ' 96'
issue: '25'
language:
- iso: eng
publication: Applied Physics Letters
publication_identifier:
issn:
- 0003-6951
- 1077-3118
publication_status: published
publisher: AIP Publishing
status: public
title: Nonpolar cubic AlGaN/GaN heterojunction field-effect transistor on Ar+ implanted
3C–SiC (001)
type: journal_article
user_id: '55706'
volume: 96
year: '2010'
...
---
_id: '4202'
abstract:
- lang: eng
text: "Unintentional doping in nonpolar a-plane \x01112¯0\x02 gallium nitride \x01GaN\x02
grown on r-plane \x0111¯02\x02\r\nsapphire using a three-dimensional \x013D\x02–two-dimensional
\x012D\x02 growth method has been\r\ncharacterized. For both 2D only and 3D–2D
growth, the presence of an unintentionally doped region\r\nadjacent to the GaN/sapphire
interface is observed by scanning capacitance microscopy \x01SCM\x02. The\r\naverage
width of this unintentionally doped layer is found to increase with increasing
3D growth\r\ntime. By using an intentionally doped GaN:Si staircase structure
for calibration, it is shown that the\r\nunintentionally doped region has an average
carrier concentration of \x012.5\x010.3\x02\x021018 cm−3. SCM\r\nalso reveals
the presence of unintentionally doped features extending at 60° from the GaN/sapphire\r\ninterface.
The observation of decreasing carrier concentration with distance from the GaN/sapphire\r\ninterface
along these features may suggest that the unintentional doping arises from oxygen\r\ndiffusion
from the sapphire substrate. Low temperature cathodoluminescence spectra reveal\r\nemission
peaks at 3.41 and 3.30 eV, which are believed to originate from basal plane stacking
faults\r\n\x01BSFs\x02 and prismatic stacking faults \x01PSFs\x02, respectively.
It is shown that the inclined features\r\nextending from the GaN/sapphire interface
exhibit both enhanced BSF and PSF emission. We\r\nsuggest that enhanced unintentional
doping occurs in regions around PSFs. Where BSFs intersect\r\nthis doped material
their emission is also enhanced due to reduced nonradiative recombination.\r\nTransmission
electron microscopy confirms the presence of PSFs extending through the film at
60°\r\nfrom the GaN/sapphire interface."
article_number: '023503'
article_type: original
author:
- first_name: Tongtong
full_name: Zhu, Tongtong
last_name: Zhu
- first_name: Carol F.
full_name: Johnston, Carol F.
last_name: Johnston
- first_name: Maik
full_name: Häberlen, Maik
last_name: Häberlen
- first_name: Menno J.
full_name: Kappers, Menno J.
last_name: Kappers
- first_name: Rachel A.
full_name: Oliver, Rachel A.
last_name: Oliver
citation:
ama: Zhu T, Johnston CF, Häberlen M, Kappers MJ, Oliver RA. Characterization of
unintentional doping in nonpolar GaN. Journal of Applied Physics. 2010;107(2).
doi:10.1063/1.3284944
apa: Zhu, T., Johnston, C. F., Häberlen, M., Kappers, M. J., & Oliver, R. A.
(2010). Characterization of unintentional doping in nonpolar GaN. Journal of
Applied Physics, 107(2). https://doi.org/10.1063/1.3284944
bibtex: '@article{Zhu_Johnston_Häberlen_Kappers_Oliver_2010, title={Characterization
of unintentional doping in nonpolar GaN}, volume={107}, DOI={10.1063/1.3284944},
number={2023503}, journal={Journal of Applied Physics}, publisher={AIP Publishing},
author={Zhu, Tongtong and Johnston, Carol F. and Häberlen, Maik and Kappers, Menno
J. and Oliver, Rachel A.}, year={2010} }'
chicago: Zhu, Tongtong, Carol F. Johnston, Maik Häberlen, Menno J. Kappers, and
Rachel A. Oliver. “Characterization of Unintentional Doping in Nonpolar GaN.”
Journal of Applied Physics 107, no. 2 (2010). https://doi.org/10.1063/1.3284944.
ieee: T. Zhu, C. F. Johnston, M. Häberlen, M. J. Kappers, and R. A. Oliver, “Characterization
of unintentional doping in nonpolar GaN,” Journal of Applied Physics, vol.
107, no. 2, 2010.
mla: Zhu, Tongtong, et al. “Characterization of Unintentional Doping in Nonpolar
GaN.” Journal of Applied Physics, vol. 107, no. 2, 023503, AIP Publishing,
2010, doi:10.1063/1.3284944.
short: T. Zhu, C.F. Johnston, M. Häberlen, M.J. Kappers, R.A. Oliver, Journal of
Applied Physics 107 (2010).
date_created: 2018-08-28T12:27:34Z
date_updated: 2022-01-06T07:00:34Z
ddc:
- '530'
department:
- _id: '15'
doi: 10.1063/1.3284944
extern: '1'
file:
- access_level: closed
content_type: application/pdf
creator: hclaudia
date_created: 2018-08-28T12:28:22Z
date_updated: 2018-08-28T12:28:22Z
file_id: '4203'
file_name: Characterization of unintentional doping in nonpolar GaN.pdf
file_size: 688753
relation: main_file
success: 1
file_date_updated: 2018-08-28T12:28:22Z
has_accepted_license: '1'
intvolume: ' 107'
issue: '2'
language:
- iso: eng
publication: Journal of Applied Physics
publication_identifier:
issn:
- 0021-8979
- 1089-7550
publication_status: published
publisher: AIP Publishing
status: public
title: Characterization of unintentional doping in nonpolar GaN
type: journal_article
user_id: '55706'
volume: 107
year: '2010'
...
---
_id: '4210'
abstract:
- lang: eng
text: "In this paper we demonstrate a strain-driven GaN interlayer method to reduce
dislocation densities in GaN grown on (111) oriented silicon by metal organic
vapour phase epitaxy (MOVPE). In order to achieve crack-free GaN layers of\r\nreasonable
thicknesses and dislocation densities it is crucial to integrate both dislocation
reduction and strain management layers. In contrast to techniques like FACELO
or nanoELO we show the in situ formation of GaN islands directly on the AlN nucleation
layer without the need to deposit a SiO2 or SiNx mask. A graded AlGaN layer for
strain management can be grown on top of this dislocation reducing 3D GaN inter-layer
in order to achieve crack-free GaN layers grown on top of the AlGaN strain management
layer. Furthermore, an additional SiNx layer for subsequent dislocation reduction
can also be incorporated into the structure and is shown to efficiently reduce
the dislocation density down to the low 10^9 cm^2. The structural properties of
the 3D GaN island buffer layer and overgrown\r\nsamples are studied by means of
SEM, cross-sectional, and plan view TEM. Cathodoluminiscence in an SEM is employed
to correlate the dislocation microstructure as observed by plan view TEM with
luminescent properties."
article_type: original
author:
- first_name: Maik
full_name: Häberlen, Maik
last_name: Häberlen
- first_name: Dandan
full_name: Zhu, Dandan
last_name: Zhu
- first_name: Clifford
full_name: McAleese, Clifford
last_name: McAleese
- first_name: Tongtong
full_name: Zhu, Tongtong
last_name: Zhu
- first_name: Menno J.
full_name: Kappers, Menno J.
last_name: Kappers
- first_name: Colin J.
full_name: Humphreys, Colin J.
last_name: Humphreys
citation:
ama: Häberlen M, Zhu D, McAleese C, Zhu T, Kappers MJ, Humphreys CJ. Dislocation
reduction in GaN grown on Si(111) using a strain-driven 3D GaN interlayer. physica
status solidi (b). 2010;247(7):1753-1756. doi:10.1002/pssb.200983537
apa: Häberlen, M., Zhu, D., McAleese, C., Zhu, T., Kappers, M. J., & Humphreys,
C. J. (2010). Dislocation reduction in GaN grown on Si(111) using a strain-driven
3D GaN interlayer. Physica Status Solidi (B), 247(7), 1753–1756.
https://doi.org/10.1002/pssb.200983537
bibtex: '@article{Häberlen_Zhu_McAleese_Zhu_Kappers_Humphreys_2010, title={Dislocation
reduction in GaN grown on Si(111) using a strain-driven 3D GaN interlayer}, volume={247},
DOI={10.1002/pssb.200983537},
number={7}, journal={physica status solidi (b)}, publisher={Wiley}, author={Häberlen,
Maik and Zhu, Dandan and McAleese, Clifford and Zhu, Tongtong and Kappers, Menno
J. and Humphreys, Colin J.}, year={2010}, pages={1753–1756} }'
chicago: 'Häberlen, Maik, Dandan Zhu, Clifford McAleese, Tongtong Zhu, Menno J.
Kappers, and Colin J. Humphreys. “Dislocation Reduction in GaN Grown on Si(111)
Using a Strain-Driven 3D GaN Interlayer.” Physica Status Solidi (B) 247,
no. 7 (2010): 1753–56. https://doi.org/10.1002/pssb.200983537.'
ieee: M. Häberlen, D. Zhu, C. McAleese, T. Zhu, M. J. Kappers, and C. J. Humphreys,
“Dislocation reduction in GaN grown on Si(111) using a strain-driven 3D GaN interlayer,”
physica status solidi (b), vol. 247, no. 7, pp. 1753–1756, 2010.
mla: Häberlen, Maik, et al. “Dislocation Reduction in GaN Grown on Si(111) Using
a Strain-Driven 3D GaN Interlayer.” Physica Status Solidi (B), vol. 247,
no. 7, Wiley, 2010, pp. 1753–56, doi:10.1002/pssb.200983537.
short: M. Häberlen, D. Zhu, C. McAleese, T. Zhu, M.J. Kappers, C.J. Humphreys, Physica
Status Solidi (B) 247 (2010) 1753–1756.
date_created: 2018-08-28T12:42:58Z
date_updated: 2022-01-06T07:00:36Z
ddc:
- '530'
department:
- _id: '15'
doi: 10.1002/pssb.200983537
file:
- access_level: closed
content_type: application/pdf
creator: hclaudia
date_created: 2018-08-28T12:43:31Z
date_updated: 2018-08-28T12:43:31Z
file_id: '4211'
file_name: Dislocation reduction in GaN grown on Si(111) using a strain-driven 3D
GaN interlayer.pdf
file_size: 911931
relation: main_file
success: 1
file_date_updated: 2018-08-28T12:43:31Z
has_accepted_license: '1'
intvolume: ' 247'
issue: '7'
language:
- iso: eng
page: 1753-1756
publication: physica status solidi (b)
publication_identifier:
issn:
- 0370-1972
- 1521-3951
publication_status: published
publisher: Wiley
status: public
title: Dislocation reduction in GaN grown on Si(111) using a strain-driven 3D GaN
interlayer
type: journal_article
user_id: '55706'
volume: 247
year: '2010'
...
---
_id: '5644'
abstract:
- lang: eng
text: The economic relevance of information systems has been studied for many years
and has attracted an abundance of research papers. However, the ?productivity
paradoxon? of the 90s, Carr?s widely recognized paper ?IT doesn?t matter?, and
several studies that do not find a positive correlation between IS investments
and economic performance reveal long-lasting difficulties for IS researchers to
explain ?IS business value?. Business executives and researchers also continue
to question the value of IS investments. This raises the question of whether literature
reviews have tapped their potential to address the concerns by covering key research
areas of IS business value and preserving their key findings. In order to address
this question, this paper identifies and describes 12 key research areas, and
synthesizes what literature reviews published in pertinent academic outlets have
done to preserve knowledge. The analysis of 22 literature reviews shows that some
crucial areas have not been (sufficiently) covered. They provide fertile areas
for future literature reviews. As this work is based on the results of more than
200 research papers, it is capable of drawing a comprehensive picture of the current
state-of-the-art in IS business value research.
author:
- first_name: Guido
full_name: Schryen, Guido
id: '72850'
last_name: Schryen
citation:
ama: 'Schryen G. Preserving knowledge on IS business value: what literature reviews
have done. Business \& Information Systems Engineering (BISE). 2010;52(4):225-237.'
apa: 'Schryen, G. (2010). Preserving knowledge on IS business value: what literature
reviews have done. Business \& Information Systems Engineering (BISE),
52(4), 225–237.'
bibtex: '@article{Schryen_2010, title={Preserving knowledge on IS business value:
what literature reviews have done}, volume={52}, number={4}, journal={Business
\& Information Systems Engineering (BISE)}, publisher={Springer}, author={Schryen,
Guido}, year={2010}, pages={225–237} }'
chicago: 'Schryen, Guido. “Preserving Knowledge on IS Business Value: What Literature
Reviews Have Done.” Business \& Information Systems Engineering (BISE)
52, no. 4 (2010): 225–37.'
ieee: 'G. Schryen, “Preserving knowledge on IS business value: what literature reviews
have done,” Business \& Information Systems Engineering (BISE), vol.
52, no. 4, pp. 225–237, 2010.'
mla: 'Schryen, Guido. “Preserving Knowledge on IS Business Value: What Literature
Reviews Have Done.” Business \& Information Systems Engineering (BISE),
vol. 52, no. 4, Springer, 2010, pp. 225–37.'
short: G. Schryen, Business \& Information Systems Engineering (BISE) 52 (2010)
225–237.
date_created: 2018-11-14T14:38:02Z
date_updated: 2022-01-06T07:02:19Z
ddc:
- '000'
department:
- _id: '277'
extern: '1'
file:
- access_level: open_access
content_type: application/pdf
creator: hsiemes
date_created: 2018-12-11T15:19:37Z
date_updated: 2018-12-13T15:17:12Z
file_id: '6187'
file_name: BISE-PreservingknowledgeonISbusinessvalue-Manuscript-1.pdf
file_size: 525443
relation: main_file
file_date_updated: 2018-12-13T15:17:12Z
has_accepted_license: '1'
intvolume: ' 52'
issue: '4'
keyword:
- Business value
- Information systems
- Literature review
- Meta review
language:
- iso: eng
oa: '1'
page: 225-237
publication: Business \& Information Systems Engineering (BISE)
publisher: Springer
status: public
title: 'Preserving knowledge on IS business value: what literature reviews have done'
type: journal_article
user_id: '61579'
volume: 52
year: '2010'
...
---
_id: '5645'
abstract:
- lang: eng
text: The economic relevance of information systems has been studied for many years
and has attracted an abundance of research papers. However, the ?productivity
paradoxon? of the 1990s, Carr?s widely recognized paper ?IT doesn?t matter?, and
several studies that do not find a positive correlation between IS investments
and economic performance reveal long-lasting difficulties for IS researchers to
explain ?IS business value?. Business executives and researchers also continue
to question the value of IS investments. This raises the question of whether literature
reviews have tapped their potential to address the concerns by covering key research
areas of IS business value and preserving their key findings. In order to address
this question, this paper identifies and describes 12 key research areas, and
synthesizes what literature reviews published in pertinent academic outlets have
done to preserve knowledge. The analysis of 22 literature reviews shows that some
crucial areas have not been (sufficiently) covered. They provide fertile areas
for future literature reviews. As this work is based on the results of more than
200 research papers, it is capable of drawing a comprehensive picture of the current
state-of-the-art in IS business value research.
author:
- first_name: Guido
full_name: Schryen, Guido
id: '72850'
last_name: Schryen
citation:
ama: Schryen G. Ökonomischer Wert von Informationssystemen - Beitrag von Literatur-Reviews
zum Wissenserhalt ( = Preserving Knowledge on IS Business Value. What Literature
Reviews Have Done). Wirtschaftsinformatik. 2010;52(4):225-237.
apa: Schryen, G. (2010). Ökonomischer Wert von Informationssystemen - Beitrag von
Literatur-Reviews zum Wissenserhalt ( = Preserving Knowledge on IS Business Value.
What Literature Reviews Have Done). Wirtschaftsinformatik, 52(4),
225–237.
bibtex: '@article{Schryen_2010, title={Ökonomischer Wert von Informationssystemen
- Beitrag von Literatur-Reviews zum Wissenserhalt ( = Preserving Knowledge on
IS Business Value. What Literature Reviews Have Done)}, volume={52}, number={4},
journal={Wirtschaftsinformatik}, publisher={Gabler; Springer}, author={Schryen,
Guido}, year={2010}, pages={225–237} }'
chicago: 'Schryen, Guido. “Ökonomischer Wert von Informationssystemen - Beitrag
von Literatur-Reviews Zum Wissenserhalt ( = Preserving Knowledge on IS Business
Value. What Literature Reviews Have Done).” Wirtschaftsinformatik 52, no.
4 (2010): 225–37.'
ieee: G. Schryen, “Ökonomischer Wert von Informationssystemen - Beitrag von Literatur-Reviews
zum Wissenserhalt ( = Preserving Knowledge on IS Business Value. What Literature
Reviews Have Done),” Wirtschaftsinformatik, vol. 52, no. 4, pp. 225–237,
2010.
mla: Schryen, Guido. “Ökonomischer Wert von Informationssystemen - Beitrag von Literatur-Reviews
Zum Wissenserhalt ( = Preserving Knowledge on IS Business Value. What Literature
Reviews Have Done).” Wirtschaftsinformatik, vol. 52, no. 4, Gabler; Springer,
2010, pp. 225–37.
short: G. Schryen, Wirtschaftsinformatik 52 (2010) 225–237.
date_created: 2018-11-14T14:38:45Z
date_updated: 2022-01-06T07:02:19Z
ddc:
- '000'
department:
- _id: '277'
extern: '1'
file:
- access_level: open_access
content_type: application/pdf
creator: hsiemes
date_created: 2018-12-11T15:21:36Z
date_updated: 2018-12-13T15:19:50Z
file_id: '6189'
file_name: Schryen2010_Article_ÖkonomischerWertVonInformation.pdf
file_size: 850718
relation: main_file
file_date_updated: 2018-12-13T15:19:50Z
has_accepted_license: '1'
intvolume: ' 52'
issue: '4'
language:
- iso: eng
oa: '1'
page: 225-237
publication: Wirtschaftsinformatik
publisher: Gabler; Springer
status: public
title: Ökonomischer Wert von Informationssystemen - Beitrag von Literatur-Reviews
zum Wissenserhalt ( = Preserving Knowledge on IS Business Value. What Literature
Reviews Have Done)
type: journal_article
user_id: '61579'
volume: 52
year: '2010'
...
---
_id: '16505'
abstract:
- lang: eng
text: We present an approach for real-time rendering of complex 3D scenes consisting
of millions of polygons on limited graphics hardware. In a preprocessing step,
powerful hardware is used to gain fine granular global visibility information
of a scene using an adaptive sampling algorithm. Additively the visual influence
of each object on the eventual rendered image is estimated. This influence is
used to select the most important objects to display in our approximative culling
algorithm. After the visibility data is compressed to meet the storage capabilities
of small devices, we achieve an interactive walkthrough of the Power Plant scene
on a standard netbook with an integrated graphics chipset.
author:
- first_name: Benjamin
full_name: Eikel, Benjamin
last_name: Eikel
- first_name: Claudius
full_name: Jähn, Claudius
last_name: Jähn
- first_name: Matthias
full_name: Fischer, Matthias
id: '146'
last_name: Fischer
citation:
ama: 'Eikel B, Jähn C, Fischer M. Preprocessed Global Visibility for Real-Time Rendering
on Low-End Hardware. In: Advances in Visual Computing. Berlin, Heidelberg;
2010. doi:10.1007/978-3-642-17289-2_60'
apa: Eikel, B., Jähn, C., & Fischer, M. (2010). Preprocessed Global Visibility
for Real-Time Rendering on Low-End Hardware. In Advances in Visual Computing.
Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-17289-2_60
bibtex: '@inbook{Eikel_Jähn_Fischer_2010, place={Berlin, Heidelberg}, title={Preprocessed
Global Visibility for Real-Time Rendering on Low-End Hardware}, DOI={10.1007/978-3-642-17289-2_60},
booktitle={Advances in Visual Computing}, author={Eikel, Benjamin and Jähn, Claudius
and Fischer, Matthias}, year={2010} }'
chicago: Eikel, Benjamin, Claudius Jähn, and Matthias Fischer. “Preprocessed Global
Visibility for Real-Time Rendering on Low-End Hardware.” In Advances in Visual
Computing. Berlin, Heidelberg, 2010. https://doi.org/10.1007/978-3-642-17289-2_60.
ieee: B. Eikel, C. Jähn, and M. Fischer, “Preprocessed Global Visibility for Real-Time
Rendering on Low-End Hardware,” in Advances in Visual Computing, Berlin,
Heidelberg, 2010.
mla: Eikel, Benjamin, et al. “Preprocessed Global Visibility for Real-Time Rendering
on Low-End Hardware.” Advances in Visual Computing, 2010, doi:10.1007/978-3-642-17289-2_60.
short: 'B. Eikel, C. Jähn, M. Fischer, in: Advances in Visual Computing, Berlin,
Heidelberg, 2010.'
date_created: 2020-04-14T13:06:51Z
date_updated: 2022-01-06T06:52:52Z
department:
- _id: '63'
doi: 10.1007/978-3-642-17289-2_60
language:
- iso: eng
place: Berlin, Heidelberg
publication: Advances in Visual Computing
publication_identifier:
isbn:
- '9783642172885'
- '9783642172892'
issn:
- 0302-9743
- 1611-3349
publication_status: published
status: public
title: Preprocessed Global Visibility for Real-Time Rendering on Low-End Hardware
type: book_chapter
user_id: '15415'
year: '2010'
...
---
_id: '12059'
author:
- first_name: Christoph
full_name: Sommer, Christoph
id: '49154'
last_name: Sommer
orcid: 0000-0002-4336-7350
- first_name: David
full_name: Eckhoff, David
last_name: Eckhoff
- first_name: Falko
full_name: Dressler, Falko
last_name: Dressler
citation:
ama: Sommer C, Eckhoff D, Dressler F. Improving the Accuracy of IVC Simulation Using
Crowd-sourced Geodata. PIK - Praxis der Informationsverarbeitung und Kommunikation.
2010. doi:10.1515/piko.2010.047
apa: Sommer, C., Eckhoff, D., & Dressler, F. (2010). Improving the Accuracy
of IVC Simulation Using Crowd-sourced Geodata. PIK - Praxis Der Informationsverarbeitung
Und Kommunikation. https://doi.org/10.1515/piko.2010.047
bibtex: '@article{Sommer_Eckhoff_Dressler_2010, title={Improving the Accuracy of
IVC Simulation Using Crowd-sourced Geodata}, DOI={10.1515/piko.2010.047},
journal={PIK - Praxis der Informationsverarbeitung und Kommunikation}, author={Sommer,
Christoph and Eckhoff, David and Dressler, Falko}, year={2010} }'
chicago: Sommer, Christoph, David Eckhoff, and Falko Dressler. “Improving the Accuracy
of IVC Simulation Using Crowd-Sourced Geodata.” PIK - Praxis Der Informationsverarbeitung
Und Kommunikation, 2010. https://doi.org/10.1515/piko.2010.047.
ieee: C. Sommer, D. Eckhoff, and F. Dressler, “Improving the Accuracy of IVC Simulation
Using Crowd-sourced Geodata,” PIK - Praxis der Informationsverarbeitung und
Kommunikation, 2010.
mla: Sommer, Christoph, et al. “Improving the Accuracy of IVC Simulation Using Crowd-Sourced
Geodata.” PIK - Praxis Der Informationsverarbeitung Und Kommunikation,
2010, doi:10.1515/piko.2010.047.
short: C. Sommer, D. Eckhoff, F. Dressler, PIK - Praxis Der Informationsverarbeitung
Und Kommunikation (2010).
date_created: 2019-07-18T09:55:18Z
date_updated: 2022-01-06T06:51:16Z
department:
- _id: '589'
doi: 10.1515/piko.2010.047
language:
- iso: eng
publication: PIK - Praxis der Informationsverarbeitung und Kommunikation
publication_identifier:
issn:
- 0930-5157
- 1865-8342
publication_status: published
status: public
title: Improving the Accuracy of IVC Simulation Using Crowd-sourced Geodata
type: journal_article
user_id: '49154'
year: '2010'
...
---
_id: '14563'
abstract:
- lang: eng
text: "Die computergestützte Simulation geführter elastischer Wellen in ein- oder
mehrschichtigen Wellenleitern ist in vielen Bereichen der akustischen Forschung
ein essentielles Modellierungswerkzeug. Sie ermöglicht, auch in komplexen Systemen,
eine Beschreibung der Wellenausbreitungsvorgänge, deren analytische Lösung zu
aufwendig oder nicht durchführbar ist.\r\nIm ersten Abschnitt dieses Beitrags
wird auf den halbanalytischen Solver bzw. die mathematische Formulierung des die
Wellenausbreitung beschreibenden Problems eingegangen. Der zweite Abschnitt beinhaltet
den mehrstufigen Aufbau eines Tracing-Algorithmus, welcher den Lösungsraum des
Solvers adaptiv einschränkt, so dass Leistungsfähigkeit und Robustheit des Gesamtalgorithmus
gestärkt werden."
author:
- first_name: Fabian
full_name: Bause, Fabian
last_name: Bause
- first_name: Jens
full_name: Rautenberg, Jens
last_name: Rautenberg
- first_name: Bernd
full_name: Henning, Bernd
id: '213'
last_name: Henning
citation:
ama: 'Bause F, Rautenberg J, Henning B. Entwicklung und Parametrisierung eines Mode-Tracing
Algorithmus für halbanalytische Solver. In: ; 2010:1027-1028.'
apa: Bause, F., Rautenberg, J., & Henning, B. (2010). Entwicklung und Parametrisierung
eines Mode-Tracing Algorithmus für halbanalytische Solver (pp. 1027–1028). Presented
at the 36. Jahrestagung für Akustik (DAGA 2010), Berlin.
bibtex: '@inproceedings{Bause_Rautenberg_Henning_2010, title={Entwicklung und Parametrisierung
eines Mode-Tracing Algorithmus für halbanalytische Solver}, author={Bause, Fabian
and Rautenberg, Jens and Henning, Bernd}, year={2010}, pages={1027–1028} }'
chicago: Bause, Fabian, Jens Rautenberg, and Bernd Henning. “Entwicklung Und Parametrisierung
Eines Mode-Tracing Algorithmus Für Halbanalytische Solver,” 1027–28, 2010.
ieee: F. Bause, J. Rautenberg, and B. Henning, “Entwicklung und Parametrisierung
eines Mode-Tracing Algorithmus für halbanalytische Solver,” presented at the 36.
Jahrestagung für Akustik (DAGA 2010), Berlin, 2010, pp. 1027–1028.
mla: Bause, Fabian, et al. Entwicklung Und Parametrisierung Eines Mode-Tracing
Algorithmus Für Halbanalytische Solver. 2010, pp. 1027–28.
short: 'F. Bause, J. Rautenberg, B. Henning, in: 2010, pp. 1027–1028.'
conference:
end_date: 18.03.2010
location: Berlin
name: 36. Jahrestagung für Akustik (DAGA 2010)
start_date: 15.03.2010
date_created: 2019-11-05T15:15:10Z
date_updated: 2022-01-06T06:52:03Z
department:
- _id: '49'
language:
- iso: eng
page: 1027-1028
publication_identifier:
isbn:
- 978-3-9808659-8-2
status: public
title: Entwicklung und Parametrisierung eines Mode-Tracing Algorithmus für halbanalytische
Solver
type: conference
user_id: '15911'
year: '2010'
...
---
_id: '14552'
author:
- first_name: Fabian
full_name: Bause, Fabian
last_name: Bause
- first_name: Bernd
full_name: Henning, Bernd
id: '213'
last_name: Henning
citation:
ama: 'Bause F, Henning B. Adaptives Mode-Tracing und numerische Stabilisierung modellierter
Anregungsstrukturen für die halbanalytische Simulation geführter Wellen. In: ;
21AD.'
apa: Bause, F., & Henning, B. (21AD). Adaptives Mode-Tracing und numerische
Stabilisierung modellierter Anregungsstrukturen für die halbanalytische Simulation
geführter Wellen.
bibtex: '@inproceedings{Bause_Henning_21AD, title={Adaptives Mode-Tracing und numerische
Stabilisierung modellierter Anregungsstrukturen für die halbanalytische Simulation
geführter Wellen}, author={Bause, Fabian and Henning, Bernd}, year={21AD} }'
chicago: Bause, Fabian, and Bernd Henning. “Adaptives Mode-Tracing Und Numerische
Stabilisierung Modellierter Anregungsstrukturen Für Die Halbanalytische Simulation
Geführter Wellen,” 21AD.
ieee: F. Bause and B. Henning, “Adaptives Mode-Tracing und numerische Stabilisierung
modellierter Anregungsstrukturen für die halbanalytische Simulation geführter
Wellen,” 21AD.
mla: Bause, Fabian, and Bernd Henning. Adaptives Mode-Tracing Und Numerische
Stabilisierung Modellierter Anregungsstrukturen Für Die Halbanalytische Simulation
Geführter Wellen. 21AD.
short: 'F. Bause, B. Henning, in: 21AD.'
date_created: 2019-11-05T15:01:12Z
date_updated: 2022-01-06T06:52:02Z
department:
- _id: '49'
language:
- iso: eng
status: public
title: Adaptives Mode-Tracing und numerische Stabilisierung modellierter Anregungsstrukturen
für die halbanalytische Simulation geführter Wellen
type: conference_abstract
user_id: '15911'
year: '2010'
...
---
_id: '30797'
author:
- first_name: Alexander
full_name: Mehler, Alexander
last_name: Mehler
- first_name: Petra
full_name: Weiß, Petra
last_name: Weiß
- first_name: Peter
full_name: Menke, Peter
id: '59649'
last_name: Menke
- first_name: Andy
full_name: Lücking, Andy
last_name: Lücking
citation:
ama: 'Mehler A, Weiß P, Menke P, Lücking A. Towards a Simulation Model of Dialogical
Alignment. In: Proceedings of the 8th International Conference on the Evolution
of Language (Evolang8). ; 2010:238–245.'
apa: Mehler, A., Weiß, P., Menke, P., & Lücking, A. (2010). Towards a Simulation
Model of Dialogical Alignment. Proceedings of the 8th International Conference
on the Evolution of Language (Evolang8), 238–245.
bibtex: '@inproceedings{Mehler_Weiß_Menke_Lücking_2010, title={Towards a Simulation
Model of Dialogical Alignment}, booktitle={Proceedings of the 8th International
Conference on the Evolution of Language (Evolang8)}, author={Mehler, Alexander
and Weiß, Petra and Menke, Peter and Lücking, Andy}, year={2010}, pages={238–245}
}'
chicago: Mehler, Alexander, Petra Weiß, Peter Menke, and Andy Lücking. “Towards
a Simulation Model of Dialogical Alignment.” In Proceedings of the 8th International
Conference on the Evolution of Language (Evolang8), 238–245, 2010.
ieee: A. Mehler, P. Weiß, P. Menke, and A. Lücking, “Towards a Simulation Model
of Dialogical Alignment,” in Proceedings of the 8th International Conference
on the Evolution of Language (Evolang8), 2010, pp. 238–245.
mla: Mehler, Alexander, et al. “Towards a Simulation Model of Dialogical Alignment.”
Proceedings of the 8th International Conference on the Evolution of Language
(Evolang8), 2010, pp. 238–245.
short: 'A. Mehler, P. Weiß, P. Menke, A. Lücking, in: Proceedings of the 8th International
Conference on the Evolution of Language (Evolang8), 2010, pp. 238–245.'
date_created: 2022-04-06T07:20:31Z
date_updated: 2022-04-06T07:29:50Z
language:
- iso: eng
page: 238–245
publication: Proceedings of the 8th International Conference on the Evolution of Language
(Evolang8)
status: public
title: Towards a Simulation Model of Dialogical Alignment
type: conference
user_id: '59649'
year: '2010'
...
---
_id: '22050'
abstract:
- lang: eng
text: Generative production techniques have the advantage of manufacturing parts
via an additive process without needing a forming tool. One of these additive
manufacturing technologies is “Fused Deposition Modeling” (FDM). From a 3D-CAD
data set, components and assemblies are manufactured out of thermoplastic material
in only a few working steps. Native software automatically slices the data, calculates
the support structures, and creates toolpaths. The parts then are built up layer
by layer by means of an additive process. An extrusion head deposits the molten
thermoplastic filament to create each layer. This technology began as a process
for creating prototype parts; recently it has found new utility in the production
of manufacturing tools and as a manufacturing process for end-use parts. In order
to be used as a part for serial production, the components must possess the required
mechanical properties. To this end, not only is the chosen material relevant,
but a correct process control is also necessary. An interesting material for the
aircraft and automotive industry is the material PEI with the trade name Ultem*9085.
This material should typically be used on FDM-machines for the manufacturing of
end products. The aim of the research is to determine the present mechanical data
based on the process control, as well as reproducibility from job to job. In this
work the influence of the orientation and the structure of the manufactured parts
based on the mechanical data are analyzed. Sample parts are generated with the
given parameters of the native software based upon the CAD data. First, specimens
were analyzed concerning their geometry and configuration. The dimensions and
weight were measured. The mechanical tests conducted were the tensile and compression
tests.
author:
- first_name: A.
full_name: Bagsik, A.
last_name: Bagsik
- first_name: Volker
full_name: Schöppner, Volker
id: '20530'
last_name: Schöppner
- first_name: E.
full_name: Klemp, E.
last_name: Klemp
citation:
ama: 'Bagsik A, Schöppner V, Klemp E. FDM Part Quality Manufactured with ULTEM 9085.
In: Proceedings of International Conference Polymeric Materials. ; 2010.
doi:https://docplayer.net/255735-Fdm-part-quality-manufactured-with-ultem-9085.html'
apa: Bagsik, A., Schöppner, V., & Klemp, E. (2010). FDM Part Quality Manufactured
with ULTEM 9085. Proceedings of International Conference Polymeric Materials.
https://docplayer.net/255735-Fdm-part-quality-manufactured-with-ultem-9085.html
bibtex: '@inproceedings{Bagsik_Schöppner_Klemp_2010, title={FDM Part Quality Manufactured
with ULTEM 9085}, DOI={https://docplayer.net/255735-Fdm-part-quality-manufactured-with-ultem-9085.html},
booktitle={Proceedings of International Conference Polymeric Materials}, author={Bagsik,
A. and Schöppner, Volker and Klemp, E.}, year={2010} }'
chicago: Bagsik, A., Volker Schöppner, and E. Klemp. “FDM Part Quality Manufactured
with ULTEM 9085.” In Proceedings of International Conference Polymeric Materials,
2010. https://docplayer.net/255735-Fdm-part-quality-manufactured-with-ultem-9085.html.
ieee: 'A. Bagsik, V. Schöppner, and E. Klemp, “FDM Part Quality Manufactured with
ULTEM 9085,” 2010, doi: https://docplayer.net/255735-Fdm-part-quality-manufactured-with-ultem-9085.html.'
mla: Bagsik, A., et al. “FDM Part Quality Manufactured with ULTEM 9085.” Proceedings
of International Conference Polymeric Materials, 2010, doi:https://docplayer.net/255735-Fdm-part-quality-manufactured-with-ultem-9085.html.
short: 'A. Bagsik, V. Schöppner, E. Klemp, in: Proceedings of International Conference
Polymeric Materials, 2010.'
date_created: 2021-05-07T13:23:34Z
date_updated: 2022-04-25T08:04:26Z
department:
- _id: '219'
- _id: '624'
- _id: '367'
- _id: '9'
doi: https://docplayer.net/255735-Fdm-part-quality-manufactured-with-ultem-9085.html
language:
- iso: eng
publication: Proceedings of International Conference Polymeric Materials
publication_identifier:
isbn:
- 978-3-868-29282-4
quality_controlled: '1'
status: public
title: FDM Part Quality Manufactured with ULTEM 9085
type: conference
user_id: '70729'
year: '2010'
...
---
_id: '36036'
author:
- first_name: Kirsten
full_name: Schlegel-Matthies, Kirsten
id: '459'
last_name: Schlegel-Matthies
citation:
ama: 'Schlegel-Matthies K. Überschuldung - Bildungsbezogene Perspektive. In: Müller
C, Schulz F, Thien U, eds. Auf dem Weg zum Jugendintegrationskonzept. Grundlagen
und Herausforderungen angesichts veränderter Lebenslagen junger Menschen.
Lit-Verlag; 2010:247-250.'
apa: Schlegel-Matthies, K. (2010). Überschuldung - Bildungsbezogene Perspektive.
In C. Müller, F. Schulz, & U. Thien (Eds.), Auf dem Weg zum Jugendintegrationskonzept.
Grundlagen und Herausforderungen angesichts veränderter Lebenslagen junger Menschen
(pp. 247–250). Lit-Verlag.
bibtex: '@inbook{Schlegel-Matthies_2010, place={Münster, Berlin}, title={Überschuldung
- Bildungsbezogene Perspektive}, booktitle={Auf dem Weg zum Jugendintegrationskonzept.
Grundlagen und Herausforderungen angesichts veränderter Lebenslagen junger Menschen},
publisher={Lit-Verlag}, author={Schlegel-Matthies, Kirsten}, editor={Müller, Christine
and Schulz, Franziska and Thien, Ulrich}, year={2010}, pages={247–250} }'
chicago: 'Schlegel-Matthies, Kirsten. “Überschuldung - Bildungsbezogene Perspektive.”
In Auf dem Weg zum Jugendintegrationskonzept. Grundlagen und Herausforderungen
angesichts veränderter Lebenslagen junger Menschen, edited by Christine Müller,
Franziska Schulz, and Ulrich Thien, 247–50. Münster, Berlin: Lit-Verlag, 2010.'
ieee: 'K. Schlegel-Matthies, “Überschuldung - Bildungsbezogene Perspektive,” in
Auf dem Weg zum Jugendintegrationskonzept. Grundlagen und Herausforderungen
angesichts veränderter Lebenslagen junger Menschen, C. Müller, F. Schulz,
and U. Thien, Eds. Münster, Berlin: Lit-Verlag, 2010, pp. 247–250.'
mla: Schlegel-Matthies, Kirsten. “Überschuldung - Bildungsbezogene Perspektive.”
Auf dem Weg zum Jugendintegrationskonzept. Grundlagen und Herausforderungen
angesichts veränderter Lebenslagen junger Menschen, edited by Christine Müller
et al., Lit-Verlag, 2010, pp. 247–50.
short: 'K. Schlegel-Matthies, in: C. Müller, F. Schulz, U. Thien (Eds.), Auf dem
Weg zum Jugendintegrationskonzept. Grundlagen und Herausforderungen angesichts
veränderter Lebenslagen junger Menschen, Lit-Verlag, Münster, Berlin, 2010, pp.
247–250.'
date_created: 2023-01-11T11:13:01Z
date_updated: 2023-01-11T11:25:57Z
department:
- _id: '35'
- _id: '17'
- _id: '22'
- _id: '396'
editor:
- first_name: Christine
full_name: Müller, Christine
last_name: Müller
- first_name: Franziska
full_name: Schulz, Franziska
last_name: Schulz
- first_name: Ulrich
full_name: Thien, Ulrich
last_name: Thien
language:
- iso: ger
page: 247 - 250
place: Münster, Berlin
publication: Auf dem Weg zum Jugendintegrationskonzept. Grundlagen und Herausforderungen
angesichts veränderter Lebenslagen junger Menschen
publication_identifier:
isbn:
- '9783643105103'
publication_status: published
publisher: Lit-Verlag
status: public
title: Überschuldung - Bildungsbezogene Perspektive
type: book_chapter
user_id: '459'
year: '2010'
...
---
_id: '54942'
abstract:
- lang: eng
text: Loss-of-function mutations of the epithelial sodium channel (ENaC) may contribute
to pulmonary symptoms resembling those of patients with atypical cystic fibrosis
(CF). Recently, we identified a loss-of-function mutation in the alpha-subunit
of ENaC (alphaF61L) in an atypical CF patient without mutations in CFTR. To investigate
the functional effect of this mutation, we expressed human wild-type alpha beta
gamma-ENaC or mutant alpha(F61L) beta gamma-ENaC in Xenopus laevis oocytes. The
alphaF61L mutation reduced the ENaC mediated whole-cell currents by approximately
90%. In contrast, the mutation decreased channel surface expression only by approximately
40% and did not alter the single-channel conductance. These findings indicate
that the major effect of the mutation is a reduction of the average channel open
probability (P(o)). This was confirmed by experiments using the betaS520C mutant
ENaC which can be converted to a channel with a P(o) of nearly one, and by experiments
using chymotrypsin to proteolytically activate the channel. These experiments
revealed that the mutation reduced the average P(o) of ENaC by approximately 75%.
Na(+) self inhibition of the mutant channel was significantly enhanced, but the
observed effect was too small to account for the large reduction in average channel
P(o). The ENaC-activator S3969 partially rescued the loss-of-function phenotype
of the alphaF61L mutation. We conclude that the alphaF61L mutation may contribute
to respiratory symptoms in atypical CF patients.
author:
- first_name: Regina
full_name: Huber, Regina
last_name: Huber
- first_name: Bettina
full_name: Krueger, Bettina
id: '49428'
last_name: Krueger
orcid: 0000-0001-5351-1785
- first_name: Alexei
full_name: Diakov, Alexei
last_name: Diakov
- first_name: Judit
full_name: Korbmacher, Judit
last_name: Korbmacher
- first_name: Silke
full_name: Haerteis, Silke
last_name: Haerteis
- first_name: Jürgen
full_name: Einsiedel, Jürgen
last_name: Einsiedel
- first_name: Peter
full_name: Gmeiner, Peter
last_name: Gmeiner
- first_name: Abul
full_name: Azad, Abul
last_name: Azad
- first_name: Harry
full_name: Cuppens, Harry
last_name: Cuppens
- first_name: Jean-Jaques
full_name: Cassiman, Jean-Jaques
last_name: Cassiman
- first_name: Christoph
full_name: Korbmacher, Christoph
last_name: Korbmacher
- first_name: Robert
full_name: Rauh, Robert
last_name: Rauh
citation:
ama: Huber R, Krueger B, Diakov A, et al. Functional Characterization of a Partial
Loss-of-Function Mutation of the Epithelial Sodium Channel (ENaC) Associated with
Atypical Cystic Fibrosis. Cellular Physiology and Biochemistry. 2010;25(001):145–158.
doi:10.1159/000272059
apa: Huber, R., Krueger, B., Diakov, A., Korbmacher, J., Haerteis, S., Einsiedel,
J., Gmeiner, P., Azad, A., Cuppens, H., Cassiman, J.-J., Korbmacher, C., &
Rauh, R. (2010). Functional Characterization of a Partial Loss-of-Function Mutation
of the Epithelial Sodium Channel (ENaC) Associated with Atypical Cystic Fibrosis.
Cellular Physiology and Biochemistry, 25(001), 145–158. https://doi.org/10.1159/000272059
bibtex: '@article{Huber_Krueger_Diakov_Korbmacher_Haerteis_Einsiedel_Gmeiner_Azad_Cuppens_Cassiman_et
al._2010, title={Functional Characterization of a Partial Loss-of-Function Mutation
of the Epithelial Sodium Channel (ENaC) Associated with Atypical Cystic Fibrosis},
volume={25}, DOI={10.1159/000272059},
number={001}, journal={Cellular Physiology and Biochemistry}, publisher={S. Karger
AG}, author={Huber, Regina and Krueger, Bettina and Diakov, Alexei and Korbmacher,
Judit and Haerteis, Silke and Einsiedel, Jürgen and Gmeiner, Peter and Azad, Abul
and Cuppens, Harry and Cassiman, Jean-Jaques and et al.}, year={2010}, pages={145–158}
}'
chicago: 'Huber, Regina, Bettina Krueger, Alexei Diakov, Judit Korbmacher, Silke
Haerteis, Jürgen Einsiedel, Peter Gmeiner, et al. “Functional Characterization
of a Partial Loss-of-Function Mutation of the Epithelial Sodium Channel (ENaC)
Associated with Atypical Cystic Fibrosis.” Cellular Physiology and Biochemistry
25, no. 001 (2010): 145–158. https://doi.org/10.1159/000272059.'
ieee: 'R. Huber et al., “Functional Characterization of a Partial Loss-of-Function
Mutation of the Epithelial Sodium Channel (ENaC) Associated with Atypical Cystic
Fibrosis,” Cellular Physiology and Biochemistry, vol. 25, no. 001, pp.
145–158, 2010, doi: 10.1159/000272059.'
mla: Huber, Regina, et al. “Functional Characterization of a Partial Loss-of-Function
Mutation of the Epithelial Sodium Channel (ENaC) Associated with Atypical Cystic
Fibrosis.” Cellular Physiology and Biochemistry, vol. 25, no. 001, S. Karger
AG, 2010, pp. 145–158, doi:10.1159/000272059.
short: R. Huber, B. Krueger, A. Diakov, J. Korbmacher, S. Haerteis, J. Einsiedel,
P. Gmeiner, A. Azad, H. Cuppens, J.-J. Cassiman, C. Korbmacher, R. Rauh, Cellular
Physiology and Biochemistry 25 (2010) 145–158.
date_created: 2024-06-30T13:56:57Z
date_updated: 2024-06-30T13:57:07Z
department:
- _id: '35'
- _id: '22'
doi: 10.1159/000272059
intvolume: ' 25'
issue: '001'
language:
- iso: eng
page: 145–158
publication: Cellular Physiology and Biochemistry
publisher: S. Karger AG
status: public
title: Functional Characterization of a Partial Loss-of-Function Mutation of the Epithelial
Sodium Channel (ENaC) Associated with Atypical Cystic Fibrosis
type: journal_article
user_id: '49428'
volume: 25
year: '2010'
...
---
_id: '37007'
abstract:
- lang: eng
text: UML is widely applied for the specification and modeling of software and some
studies have demonstrated that it is applicable for HW/SW codesign. However, in
this area there is still a big gap from UML modeling to SystemC-based verification
and synthesis environments. This paper presents an efficient approach to bridge
this gap in the context of Systems-on-a-Chip (SoC) design. We propose a framework
for the seamless integration of a customized SysML entry with code generation
for HW/SW cosimulation and high-level FPGA synthesis. For this, we extended the
SysML UML profile by SystemC and synthesis capabilities. Two case studies demonstrate
the applicability of our approach.
author:
- first_name: Fabian
full_name: Mischkalla, Fabian
last_name: Mischkalla
- first_name: Da
full_name: He, Da
last_name: He
- first_name: Wolfgang
full_name: Müller, Wolfgang
id: '16243'
last_name: Müller
citation:
ama: 'Mischkalla F, He D, Müller W. Closing the Gap between UML-based Modeling and
Simulation of Combined HW/SW Systems. In: Proceedings of DATE’10. IEEE;
2010. doi:10.1109/DATE.2010.5456990'
apa: Mischkalla, F., He, D., & Müller, W. (2010). Closing the Gap between UML-based
Modeling and Simulation of Combined HW/SW Systems. Proceedings of DATE’10.
2010 Design, Automation & Test in Europe Conference & Exhibition (DATE
2010), Dresden. https://doi.org/10.1109/DATE.2010.5456990
bibtex: '@inproceedings{Mischkalla_He_Müller_2010, place={Dresden}, title={Closing
the Gap between UML-based Modeling and Simulation of Combined HW/SW Systems},
DOI={10.1109/DATE.2010.5456990},
booktitle={Proceedings of DATE’10}, publisher={IEEE}, author={Mischkalla, Fabian
and He, Da and Müller, Wolfgang}, year={2010} }'
chicago: 'Mischkalla, Fabian, Da He, and Wolfgang Müller. “Closing the Gap between
UML-Based Modeling and Simulation of Combined HW/SW Systems.” In Proceedings
of DATE’10. Dresden: IEEE, 2010. https://doi.org/10.1109/DATE.2010.5456990.'
ieee: 'F. Mischkalla, D. He, and W. Müller, “Closing the Gap between UML-based Modeling
and Simulation of Combined HW/SW Systems,” presented at the 2010 Design, Automation
& Test in Europe Conference & Exhibition (DATE 2010), Dresden, 2010, doi:
10.1109/DATE.2010.5456990.'
mla: Mischkalla, Fabian, et al. “Closing the Gap between UML-Based Modeling and
Simulation of Combined HW/SW Systems.” Proceedings of DATE’10, IEEE, 2010,
doi:10.1109/DATE.2010.5456990.
short: 'F. Mischkalla, D. He, W. Müller, in: Proceedings of DATE’10, IEEE, Dresden,
2010.'
conference:
location: Dresden
name: 2010 Design, Automation & Test in Europe Conference & Exhibition (DATE 2010)
date_created: 2023-01-17T09:12:35Z
date_updated: 2023-01-17T09:12:44Z
department:
- _id: '672'
doi: 10.1109/DATE.2010.5456990
keyword:
- Unified modeling language
- Field programmable gate arrays
- Bridges
- Helium
- Real time systems
- Operating systems
- Documentation
- Application software
- XML
- Space exploration
language:
- iso: eng
place: Dresden
publication: Proceedings of DATE’10
publication_identifier:
eisbn:
- 978-3-9810801-6-2
publisher: IEEE
status: public
title: Closing the Gap between UML-based Modeling and Simulation of Combined HW/SW
Systems
type: conference
user_id: '5786'
year: '2010'
...
---
_id: '37009'
abstract:
- lang: eng
text: Today, mobile and embedded real time systems have to cope with the migration
and allocation of multiple software tasks running on top of a real time operating
system (RTOS) residing on one or several processors. For scaling of each task
set and processor configuration, instruction set simulation and worst case timing
analysis are typically applied. This paper presents a complementary approach for
the verification of RTOS properties based on an abstract RTOS-Model in SystemC.
We apply IEEE P1850 PSL for which we present an approach and first experiences
for the assertion-based verification of RTOS properties.
author:
- first_name: Marcio F. S.
full_name: Oliveira, Marcio F. S.
last_name: Oliveira
- first_name: Henning
full_name: Zabel, Henning
last_name: Zabel
- first_name: Wolfgang
full_name: Müller, Wolfgang
id: '16243'
last_name: Müller
citation:
ama: 'Oliveira MFS, Zabel H, Müller W. Assertion-Based Verification of RTOS Properties.
In: Proceedings of DATE’10. IEEE; 2010. doi:10.1109/DATE.2010.5457130'
apa: Oliveira, M. F. S., Zabel, H., & Müller, W. (2010). Assertion-Based Verification
of RTOS Properties. Proceedings of DATE’10. 2010 Design, Automation &
Test in Europe Conference & Exhibition (DATE 2010), Dresden. https://doi.org/10.1109/DATE.2010.5457130
bibtex: '@inproceedings{Oliveira_Zabel_Müller_2010, place={Dresden}, title={Assertion-Based
Verification of RTOS Properties}, DOI={10.1109/DATE.2010.5457130},
booktitle={Proceedings of DATE’10}, publisher={IEEE}, author={Oliveira, Marcio
F. S. and Zabel, Henning and Müller, Wolfgang}, year={2010} }'
chicago: 'Oliveira, Marcio F. S., Henning Zabel, and Wolfgang Müller. “Assertion-Based
Verification of RTOS Properties.” In Proceedings of DATE’10. Dresden: IEEE,
2010. https://doi.org/10.1109/DATE.2010.5457130.'
ieee: 'M. F. S. Oliveira, H. Zabel, and W. Müller, “Assertion-Based Verification
of RTOS Properties,” presented at the 2010 Design, Automation & Test in Europe
Conference & Exhibition (DATE 2010), Dresden, 2010, doi: 10.1109/DATE.2010.5457130.'
mla: Oliveira, Marcio F. S., et al. “Assertion-Based Verification of RTOS Properties.”
Proceedings of DATE’10, IEEE, 2010, doi:10.1109/DATE.2010.5457130.
short: 'M.F.S. Oliveira, H. Zabel, W. Müller, in: Proceedings of DATE’10, IEEE,
Dresden, 2010.'
conference:
location: Dresden
name: 2010 Design, Automation & Test in Europe Conference & Exhibition (DATE 2010)
date_created: 2023-01-17T09:15:10Z
date_updated: 2023-01-17T09:15:18Z
department:
- _id: '672'
doi: 10.1109/DATE.2010.5457130
keyword:
- Operating systems
- Real time systems
- Timing
- Hardware
- Analytical models
- Embedded software
- Software systems
- Processor scheduling
- Software performance
- Performance analysis
language:
- iso: eng
place: Dresden
publication: Proceedings of DATE’10
publisher: IEEE
status: public
title: Assertion-Based Verification of RTOS Properties
type: conference
user_id: '5786'
year: '2010'
...