---
_id: '63223'
abstract:
- lang: eng
text: AbstractThe quartz crystal microbalance with
dissipation monitoring (QCM‐D) is routinely used to investigate structured samples.
Here, a simulation technique is described, that predicts the shifts of frequency
and half bandwidth, Δfn and ΔΓn,
of a quartz resonator operating on different overtone orders, n,
induced by structured samples in contact with the resonator surface in liquid.
The technique, abbreviated as FreqD‐LBM, solves the Stokes equation in the frequency
domain. The solution provides the complex amplitude of the area‐averaged tangential
stress at the resonator surface, from which Δfn
and ΔΓn are derived. Because the
dynamical variables are complex amplitudes, the viscosity can be complex, as well.
The technique naturally covers viscoelasticity. Limitations are linked to the
grid resolution and to problems at large viscosity. Validation steps include viscoelastic
films, rough surfaces, an oscillating cylinder in a viscous medium, and a free‐floating
sphere above the resonator. Application examples are soft adsorbed particles,
stiff adsorbed particles, and a large, immobile spherical cap above the resonator,
which allows to study the high‐frequency properties of the material in the gap.
FreqDLBM runs on an office PC and does not require expert knowledge of numerical
techniques. It is accessible to an experimentalist.
article_number: '2401373'
article_type: original
author:
- first_name: Diethelm
full_name: Johannsmann, Diethelm
last_name: Johannsmann
- first_name: Paul
full_name: Häusner, Paul
last_name: Häusner
- first_name: Arne
full_name: Langhoff, Arne
last_name: Langhoff
- first_name: Christian
full_name: Leppin, Christian
id: '117722'
last_name: Leppin
- first_name: Ilya
full_name: Reviakine, Ilya
last_name: Reviakine
- first_name: Viktor
full_name: Vanoppen, Viktor
last_name: Vanoppen
citation:
ama: 'Johannsmann D, Häusner P, Langhoff A, Leppin C, Reviakine I, Vanoppen V. The
Frequency‐Domain Lattice Boltzmann Method (FreqD‐LBM): A Versatile Tool to Predict
the QCM Response Induced by Structured Samples. Advanced Theory and Simulations.
2025;8(7). doi:10.1002/adts.202401373'
apa: 'Johannsmann, D., Häusner, P., Langhoff, A., Leppin, C., Reviakine, I., &
Vanoppen, V. (2025). The Frequency‐Domain Lattice Boltzmann Method (FreqD‐LBM):
A Versatile Tool to Predict the QCM Response Induced by Structured Samples. Advanced
Theory and Simulations, 8(7), Article 2401373. https://doi.org/10.1002/adts.202401373'
bibtex: '@article{Johannsmann_Häusner_Langhoff_Leppin_Reviakine_Vanoppen_2025, title={The
Frequency‐Domain Lattice Boltzmann Method (FreqD‐LBM): A Versatile Tool to Predict
the QCM Response Induced by Structured Samples}, volume={8}, DOI={10.1002/adts.202401373},
number={72401373}, journal={Advanced Theory and Simulations}, publisher={Wiley},
author={Johannsmann, Diethelm and Häusner, Paul and Langhoff, Arne and Leppin,
Christian and Reviakine, Ilya and Vanoppen, Viktor}, year={2025} }'
chicago: 'Johannsmann, Diethelm, Paul Häusner, Arne Langhoff, Christian Leppin,
Ilya Reviakine, and Viktor Vanoppen. “The Frequency‐Domain Lattice Boltzmann Method
(FreqD‐LBM): A Versatile Tool to Predict the QCM Response Induced by Structured
Samples.” Advanced Theory and Simulations 8, no. 7 (2025). https://doi.org/10.1002/adts.202401373.'
ieee: 'D. Johannsmann, P. Häusner, A. Langhoff, C. Leppin, I. Reviakine, and V.
Vanoppen, “The Frequency‐Domain Lattice Boltzmann Method (FreqD‐LBM): A Versatile
Tool to Predict the QCM Response Induced by Structured Samples,” Advanced Theory
and Simulations, vol. 8, no. 7, Art. no. 2401373, 2025, doi: 10.1002/adts.202401373.'
mla: 'Johannsmann, Diethelm, et al. “The Frequency‐Domain Lattice Boltzmann Method
(FreqD‐LBM): A Versatile Tool to Predict the QCM Response Induced by Structured
Samples.” Advanced Theory and Simulations, vol. 8, no. 7, 2401373, Wiley,
2025, doi:10.1002/adts.202401373.'
short: D. Johannsmann, P. Häusner, A. Langhoff, C. Leppin, I. Reviakine, V. Vanoppen,
Advanced Theory and Simulations 8 (2025).
date_created: 2025-12-18T16:57:22Z
date_updated: 2025-12-18T17:46:34Z
doi: 10.1002/adts.202401373
intvolume: ' 8'
issue: '7'
language:
- iso: eng
publication: Advanced Theory and Simulations
publication_identifier:
issn:
- 2513-0390
- 2513-0390
publication_status: published
publisher: Wiley
quality_controlled: '1'
status: public
title: 'The Frequency‐Domain Lattice Boltzmann Method (FreqD‐LBM): A Versatile Tool
to Predict the QCM Response Induced by Structured Samples'
type: journal_article
user_id: '117722'
volume: 8
year: '2025'
...
---
_id: '62766'
abstract:
- lang: eng
text: raditional assessment formats in university-based EFL teacher education programs
usually focus on cognitive dispositions rather than on the actual performance
of pre-service EFL teachers in everyday teaching situations. This assessment gap
is addressed in this thesis by developing and validating a role-play-based simulation
(RobS) designed for the summative assessment of pre-service EFL teachers' feedback
competence on writing. Drawing on theories from multiple disciplines, such as
higher education, medical education, teacher education, educational psychology,
and EFL-specific didactics, the RobS is developed as a performance-oriented assessment
format. In the RobS, pre-service EFL teachers engage in a feedback conversation
with trained actors who portray a standardized learner. Following an argument-based
approach to validation, the extent to which the RobS can be considered valid is
investigated. Data from multiple studies, focusing on aspects such as authenticity,
fairness, reliability, and external validity, are presented. The discussion in
the validity argument indicates that the RobS can elicit and assess the performative
facet of feedback competence on writing with sufficient confidence. This work
contributes a novel, empirically supported assessment framework to teacher education
research. Moreover, it presents an approach to address the assessment gap, enabling
pre-service EFL teachers to show how they provide feedback, rather than just tell
their lecturers about it.
author:
- first_name: Thomas
full_name: Janzen, Thomas
id: '89329'
last_name: Janzen
orcid: 0009-0003-1941-166X
citation:
ama: Janzen T. Show, Don’t Tell - Developing and Validating a Role-Play-Based
Simulation (RobS) for the Assessment of Pre-Service EFL Teachers’ Feedback Competence
on Writing. Logos Verlag; 2025. doi:https://doi.org/10.30819/5994
apa: Janzen, T. (2025). Show, don’t tell - Developing and Validating a Role-Play-Based
Simulation (RobS) for the Assessment of Pre-Service EFL Teachers’ Feedback Competence
on Writing. Logos Verlag. https://doi.org/10.30819/5994
bibtex: '@book{Janzen_2025, place={Berlin}, title={Show, don’t tell - Developing
and Validating a Role-Play-Based Simulation (RobS) for the Assessment of Pre-Service
EFL Teachers’ Feedback Competence on Writing}, DOI={https://doi.org/10.30819/5994},
publisher={Logos Verlag}, author={Janzen, Thomas}, year={2025} }'
chicago: 'Janzen, Thomas. Show, Don’t Tell - Developing and Validating a Role-Play-Based
Simulation (RobS) for the Assessment of Pre-Service EFL Teachers’ Feedback Competence
on Writing. Berlin: Logos Verlag, 2025. https://doi.org/10.30819/5994.'
ieee: 'T. Janzen, Show, don’t tell - Developing and Validating a Role-Play-Based
Simulation (RobS) for the Assessment of Pre-Service EFL Teachers’ Feedback Competence
on Writing. Berlin: Logos Verlag, 2025.'
mla: Janzen, Thomas. Show, Don’t Tell - Developing and Validating a Role-Play-Based
Simulation (RobS) for the Assessment of Pre-Service EFL Teachers’ Feedback Competence
on Writing. Logos Verlag, 2025, doi:https://doi.org/10.30819/5994.
short: T. Janzen, Show, Don’t Tell - Developing and Validating a Role-Play-Based
Simulation (RobS) for the Assessment of Pre-Service EFL Teachers’ Feedback Competence
on Writing, Logos Verlag, Berlin, 2025.
date_created: 2025-12-03T11:11:44Z
date_updated: 2025-12-23T07:33:22Z
ddc:
- '370'
doi: https://doi.org/10.30819/5994
extern: '1'
file:
- access_level: open_access
content_type: application/pdf
creator: janzent
date_created: 2025-12-23T07:31:25Z
date_updated: 2025-12-23T07:31:25Z
file_id: '63404'
file_name: Janzen, T. (2025).pdf
file_size: 9551046
relation: main_file
file_date_updated: 2025-12-23T07:31:25Z
has_accepted_license: '1'
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://doi.org/10.30819/5994
oa: '1'
place: Berlin
publication_identifier:
unknown:
- ' 978-3-8325-5994-6'
publication_status: published
publisher: Logos Verlag
status: public
supervisor:
- first_name: Christoph
full_name: Vogelsang, Christoph
id: '4245'
last_name: Vogelsang
orcid: 0000-0002-5804-1855
title: Show, don’t tell - Developing and Validating a Role-Play-Based Simulation (RobS)
for the Assessment of Pre-Service EFL Teachers’ Feedback Competence on Writing
type: dissertation
user_id: '89329'
year: '2025'
...
---
_id: '63209'
abstract:
- lang: ger
text: 'Die DFG-Projekte AddFeRo-PM (406108415) und AddFeRo-SR (465089065) untersuchten
die Potenziale des LB-PBF/M-Verfahrens zur Herstellung von Rotoren für unterschiedliche
elektrische Maschinen. Im interdisziplinären Ansatz wurden Materialentwicklung
und mechanische sowie elektromagnetische Optimierung verbunden. Im Projekt „AddFeRo-PM“
wurde der Rotor einer permanentmagneterregten Synchron- maschine (PMSM) untersucht.
FeSi erwies sich als geeignete Legierung, konnte aber wegen Spannungsrissen nur
bis zu 3 % Siliziumanteil (kurz: FeSi3) verarbeitet werden. Mechanische und elektromagnetische
Untersuchungen ermöglichten eine 3D-Optimierung der Rotorgeometrie und -struktur.
Der Demonstrator wurde additiv gefertigt und zeigt Leicht-baupotenziale sowie
reduzierte Drehmomentwelligkeit. Im Folgeprojekt „AddFeRo-SR“ kam eine Hochtemperatur-Bauraumheizung
(HTBH) zum Einsatz, die FeSi mit 6,5 % Siliziumanteil verarbeitbar machte, welches
bessere elektro- magnetische Eigenschaften bietet. Sie wurde bei einer Synchron-Reluktanzmaschine
(SynRM) getestet. Eine hybride Rotorfertigung erwies sich jedoch aufgrund von
HTBH-Einschränkungen als ungeeignet, weshalb eine einteilige Fertigung mit FeSi3
umgesetzt wurde. Experimente bestätigten vergleichbare Betriebsergebnisse zur
konventionellen Fertigung bei reduzierter Rotormasse. Zusätzlich wurde eine Methodik
entwickelt, um additive Verfahren als Ergänzung zur konventionellen Fertigung
zu integrieren. Beide Projekte zeigen das Potenzial additiver Fertigung für Leichtbau
und Wirkungsgradsteigerung im Elektromaschinenbau und bieten wertvolle Grundlagen
für industrielle Anwendungen.'
author:
- first_name: Michael
full_name: Haase, Michael
id: '35970'
last_name: Haase
- first_name: Marius
full_name: Behrendt, Marius
last_name: Behrendt
- first_name: Florian
full_name: Hengsbach, Florian
id: '14073'
last_name: Hengsbach
- first_name: Vinay
full_name: Kunnathully Sathees Kumar, Vinay
id: '60979'
last_name: Kunnathully Sathees Kumar
- first_name: Sebastian
full_name: Magerkohl, Sebastian
id: '28520'
last_name: Magerkohl
- first_name: Balázs
full_name: Magyar, Balázs
id: '97759'
last_name: Magyar
- first_name: Bernd
full_name: Ponick, Bernd
last_name: Ponick
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
- first_name: Detmar
full_name: Zimmer, Detmar
id: '604'
last_name: Zimmer
citation:
ama: 'Haase M, Behrendt M, Hengsbach F, et al. Additive Fertigung im Elektromaschinenbau:
Erforschung von Potentialen der additiven Fertigung in Rotoren permanentmagneterregter
Synchronmaschinen. Technische Informationsbibliothek; 2025. doi:10.34657/26753'
apa: 'Haase, M., Behrendt, M., Hengsbach, F., Kunnathully Sathees Kumar, V., Magerkohl,
S., Magyar, B., Ponick, B., Schaper, M., & Zimmer, D. (2025). Additive
Fertigung im Elektromaschinenbau: Erforschung von Potentialen der additiven Fertigung
in Rotoren permanentmagneterregter Synchronmaschinen. Technische Informationsbibliothek.
https://doi.org/10.34657/26753'
bibtex: '@book{Haase_Behrendt_Hengsbach_Kunnathully Sathees Kumar_Magerkohl_Magyar_Ponick_Schaper_Zimmer_2025,
place={Hannover}, title={Additive Fertigung im Elektromaschinenbau: Erforschung
von Potentialen der additiven Fertigung in Rotoren permanentmagneterregter Synchronmaschinen},
DOI={10.34657/26753}, publisher={Technische
Informationsbibliothek}, author={Haase, Michael and Behrendt, Marius and Hengsbach,
Florian and Kunnathully Sathees Kumar, Vinay and Magerkohl, Sebastian and Magyar,
Balázs and Ponick, Bernd and Schaper, Mirko and Zimmer, Detmar}, year={2025} }'
chicago: 'Haase, Michael, Marius Behrendt, Florian Hengsbach, Vinay Kunnathully
Sathees Kumar, Sebastian Magerkohl, Balázs Magyar, Bernd Ponick, Mirko Schaper,
and Detmar Zimmer. Additive Fertigung im Elektromaschinenbau: Erforschung von
Potentialen der additiven Fertigung in Rotoren permanentmagneterregter Synchronmaschinen.
Hannover: Technische Informationsbibliothek, 2025. https://doi.org/10.34657/26753.'
ieee: 'M. Haase et al., Additive Fertigung im Elektromaschinenbau: Erforschung
von Potentialen der additiven Fertigung in Rotoren permanentmagneterregter Synchronmaschinen.
Hannover: Technische Informationsbibliothek, 2025.'
mla: 'Haase, Michael, et al. Additive Fertigung im Elektromaschinenbau: Erforschung
von Potentialen der additiven Fertigung in Rotoren permanentmagneterregter Synchronmaschinen.
Technische Informationsbibliothek, 2025, doi:10.34657/26753.'
short: 'M. Haase, M. Behrendt, F. Hengsbach, V. Kunnathully Sathees Kumar, S. Magerkohl,
B. Magyar, B. Ponick, M. Schaper, D. Zimmer, Additive Fertigung im Elektromaschinenbau:
Erforschung von Potentialen der additiven Fertigung in Rotoren permanentmagneterregter
Synchronmaschinen, Technische Informationsbibliothek, Hannover, 2025.'
date_created: 2025-12-18T12:14:12Z
date_updated: 2026-01-06T08:09:33Z
department:
- _id: '146'
- _id: '158'
doi: 10.34657/26753
has_accepted_license: '1'
keyword:
- Additive Fertigung
- Elektromotor
- Leichtbau
- Synchronmotor
- DFG
language:
- iso: ger
main_file_link:
- open_access: '1'
url: https://oa.tib.eu/renate/bitstreams/9121e5bb-d113-4cfe-8fc6-610465afcd66/download
oa: '1'
place: Hannover
publication_status: published
publisher: Technische Informationsbibliothek
status: public
title: 'Additive Fertigung im Elektromaschinenbau: Erforschung von Potentialen der
additiven Fertigung in Rotoren permanentmagneterregter Synchronmaschinen'
type: report
user_id: '97759'
year: '2025'
...
---
_id: '63534'
abstract:
- lang: eng
text: Boson sampling is a key candidate for demonstrating quantum advantage
and has already yielded significant advances in quantum simulation, machine learning,
and graph theory. In this work, a unification and extension of distinct forms
of boson sampling is developed. The devised protocol merges discrete-variable
scattershot boson sampling with continuous-variable Gaussian boson sampling. Therefore,
it is rendered possible to harness the complexity of more interesting states,
such as squeezed photons, in advanced sampling protocols. A generating function
formalism is developed for the joint description of multiphoton and multimode
light undergoing Gaussian transformations. The resulting analytical tools enable
one to explore interfaces of different photonic quantum-information-processing
platforms. A numerical simulation of unified sampling is carried out, benchmarking
its performance, complexity, and scalability. Entanglement is characterized to
exemplify the generation of quantum correlations from the nonlinear interactions
of a unified sampler.
article_number: L042068
author:
- first_name: Luca
full_name: Bianchi, Luca
last_name: Bianchi
- first_name: Carlo
full_name: Marconi, Carlo
last_name: Marconi
- first_name: Laura
full_name: Ares, Laura
last_name: Ares
- first_name: Davide
full_name: Bacco, Davide
last_name: Bacco
- first_name: Jan
full_name: Sperling, Jan
id: '75127'
last_name: Sperling
orcid: 0000-0002-5844-3205
citation:
ama: Bianchi L, Marconi C, Ares L, Bacco D, Sperling J. Unified boson sampling.
Physical Review Research. 2025;7(4). doi:10.1103/8hy1-m5gg
apa: Bianchi, L., Marconi, C., Ares, L., Bacco, D., & Sperling, J. (2025). Unified
boson sampling. Physical Review Research, 7(4), Article L042068.
https://doi.org/10.1103/8hy1-m5gg
bibtex: '@article{Bianchi_Marconi_Ares_Bacco_Sperling_2025, title={Unified boson
sampling}, volume={7}, DOI={10.1103/8hy1-m5gg},
number={4L042068}, journal={Physical Review Research}, publisher={American Physical
Society (APS)}, author={Bianchi, Luca and Marconi, Carlo and Ares, Laura and Bacco,
Davide and Sperling, Jan}, year={2025} }'
chicago: Bianchi, Luca, Carlo Marconi, Laura Ares, Davide Bacco, and Jan Sperling.
“Unified Boson Sampling.” Physical Review Research 7, no. 4 (2025). https://doi.org/10.1103/8hy1-m5gg.
ieee: 'L. Bianchi, C. Marconi, L. Ares, D. Bacco, and J. Sperling, “Unified boson
sampling,” Physical Review Research, vol. 7, no. 4, Art. no. L042068, 2025,
doi: 10.1103/8hy1-m5gg.'
mla: Bianchi, Luca, et al. “Unified Boson Sampling.” Physical Review Research,
vol. 7, no. 4, L042068, American Physical Society (APS), 2025, doi:10.1103/8hy1-m5gg.
short: L. Bianchi, C. Marconi, L. Ares, D. Bacco, J. Sperling, Physical Review Research
7 (2025).
date_created: 2026-01-09T08:02:57Z
date_updated: 2026-01-09T08:03:38Z
department:
- _id: '623'
- _id: '15'
- _id: '170'
- _id: '706'
- _id: '429'
doi: 10.1103/8hy1-m5gg
intvolume: ' 7'
issue: '4'
language:
- iso: eng
publication: Physical Review Research
publication_identifier:
issn:
- 2643-1564
publication_status: published
publisher: American Physical Society (APS)
status: public
title: Unified boson sampling
type: journal_article
user_id: '75127'
volume: 7
year: '2025'
...
---
_id: '58650'
abstract:
- lang: eng
text: 'Technical systems are characterized by increasing interdisciplinarity, complexity
and networking. A product and its corresponding production systems require interdisciplinary
multi-objective optimization. Sustainability and recyclability demands increase
said complexity. The efficiency of previously established engineering methods
is reaching its limits, which can only be overcome by systematic integration of
extreme data. The aim of "hybrid decision support" is as follows: Data science
and artificial intelligence should be used to supplement human capabilities in
conjunction with existing heuristics, methods, modeling and simulation to increase
the efficiency of product creation.'
alternative_title:
- Hybride Entscheidungsunterstützung in der Produktentstehung - Mit Data Science und
Künstlicher Intelligenz die Leistungsfähigkeit erhöhen
article_type: original
author:
- first_name: Iris
full_name: Gräßler, Iris
id: '47565'
last_name: Gräßler
orcid: 0000-0001-5765-971X
- first_name: Jens
full_name: Pottebaum, Jens
id: '405'
last_name: Pottebaum
orcid: http://orcid.org/0000-0001-8778-2989
- first_name: Peter
full_name: Nyhuis, Peter
last_name: Nyhuis
- first_name: Rainer
full_name: Stark, Rainer
last_name: Stark
- first_name: Klaus-Dieter
full_name: Thoben, Klaus-Dieter
last_name: Thoben
- first_name: Petra
full_name: Wiederkehr, Petra
last_name: Wiederkehr
citation:
ama: Gräßler I, Pottebaum J, Nyhuis P, Stark R, Thoben K-D, Wiederkehr P. Hybrid
Decision Support in Product Creation - Improving performance with data science
and artificial intelligence. Industry 40 Science. 2025;2025(1). doi:10.30844/i4sd.25.1.18
apa: Gräßler, I., Pottebaum, J., Nyhuis, P., Stark, R., Thoben, K.-D., & Wiederkehr,
P. (2025). Hybrid Decision Support in Product Creation - Improving performance
with data science and artificial intelligence. Industry 4.0 Science, 2025(1).
https://doi.org/10.30844/i4sd.25.1.18
bibtex: '@article{Gräßler_Pottebaum_Nyhuis_Stark_Thoben_Wiederkehr_2025, title={Hybrid
Decision Support in Product Creation - Improving performance with data science
and artificial intelligence}, volume={2025}, DOI={10.30844/i4sd.25.1.18},
number={1}, journal={Industry 4.0 Science}, publisher={GITO mbH Verlag}, author={Gräßler,
Iris and Pottebaum, Jens and Nyhuis, Peter and Stark, Rainer and Thoben, Klaus-Dieter
and Wiederkehr, Petra}, year={2025} }'
chicago: Gräßler, Iris, Jens Pottebaum, Peter Nyhuis, Rainer Stark, Klaus-Dieter
Thoben, and Petra Wiederkehr. “Hybrid Decision Support in Product Creation - Improving
Performance with Data Science and Artificial Intelligence.” Industry 4.0 Science
2025, no. 1 (2025). https://doi.org/10.30844/i4sd.25.1.18.
ieee: 'I. Gräßler, J. Pottebaum, P. Nyhuis, R. Stark, K.-D. Thoben, and P. Wiederkehr,
“Hybrid Decision Support in Product Creation - Improving performance with data
science and artificial intelligence,” Industry 4.0 Science, vol. 2025,
no. 1, 2025, doi: 10.30844/i4sd.25.1.18.'
mla: Gräßler, Iris, et al. “Hybrid Decision Support in Product Creation - Improving
Performance with Data Science and Artificial Intelligence.” Industry 4.0 Science,
vol. 2025, no. 1, GITO mbH Verlag, 2025, doi:10.30844/i4sd.25.1.18.
short: I. Gräßler, J. Pottebaum, P. Nyhuis, R. Stark, K.-D. Thoben, P. Wiederkehr,
Industry 4.0 Science 2025 (2025).
date_created: 2025-02-15T09:31:30Z
date_updated: 2025-02-15T09:40:52Z
department:
- _id: '152'
doi: 10.30844/i4sd.25.1.18
intvolume: ' 2025'
issue: '1'
keyword:
- AI
- artificial intelligence
- Data Science
- decision support
- extreme data
- Künstliche Intelligenz
- product creation
- product development
language:
- iso: eng
main_file_link:
- open_access: '1'
oa: '1'
publication: Industry 4.0 Science
publication_identifier:
issn:
- 2942-6170
publication_status: published
publisher: GITO mbH Verlag
quality_controlled: '1'
status: public
title: Hybrid Decision Support in Product Creation - Improving performance with data
science and artificial intelligence
type: journal_article
user_id: '405'
volume: 2025
year: '2025'
...
---
_id: '58811'
abstract:
- lang: eng
text: |-
Abstract
Fractional dissipation is a powerful tool to study nonlocal physical phenomena such as damping models. The design of geometric, in particular, variational integrators for the numerical simulation of such systems relies on a variational formulation of the model. In Jiménez and Ober-Blöbaum (J Nonlinear Sci 31:46, 2021), a new approach is proposed to deal with dissipative systems including fractionally damped systems in a variational way for both, the continuous and discrete setting. It is based on the doubling of variables and their fractional derivatives. The aim of this work is to derive higher-order fractional variational integrators by means of convolution quadrature (CQ) based on backward difference formulas. We then provide numerical methods that are of order 2 improving a previous result in Jiménez and Ober-Blöbaum (J Nonlinear Sci 31:46, 2021). The convergence properties of the fractional variational integrators and saturation effects due to the approximation of the fractional derivatives by CQ are studied numerically.
article_number: '38'
author:
- first_name: Khaled
full_name: Hariz Belgacem, Khaled
last_name: Hariz Belgacem
- first_name: Fernando
full_name: Jiménez, Fernando
last_name: Jiménez
- first_name: Sina
full_name: Ober-Blöbaum, Sina
last_name: Ober-Blöbaum
citation:
ama: Hariz Belgacem K, Jiménez F, Ober-Blöbaum S. Fractional Variational Integrators
Based on Convolution Quadrature. Journal of Nonlinear Science. 2025;35(2).
doi:10.1007/s00332-025-10131-0
apa: Hariz Belgacem, K., Jiménez, F., & Ober-Blöbaum, S. (2025). Fractional
Variational Integrators Based on Convolution Quadrature. Journal of Nonlinear
Science, 35(2), Article 38. https://doi.org/10.1007/s00332-025-10131-0
bibtex: '@article{Hariz Belgacem_Jiménez_Ober-Blöbaum_2025, title={Fractional Variational
Integrators Based on Convolution Quadrature}, volume={35}, DOI={10.1007/s00332-025-10131-0},
number={238}, journal={Journal of Nonlinear Science}, publisher={Springer Science
and Business Media LLC}, author={Hariz Belgacem, Khaled and Jiménez, Fernando
and Ober-Blöbaum, Sina}, year={2025} }'
chicago: Hariz Belgacem, Khaled, Fernando Jiménez, and Sina Ober-Blöbaum. “Fractional
Variational Integrators Based on Convolution Quadrature.” Journal of Nonlinear
Science 35, no. 2 (2025). https://doi.org/10.1007/s00332-025-10131-0.
ieee: 'K. Hariz Belgacem, F. Jiménez, and S. Ober-Blöbaum, “Fractional Variational
Integrators Based on Convolution Quadrature,” Journal of Nonlinear Science,
vol. 35, no. 2, Art. no. 38, 2025, doi: 10.1007/s00332-025-10131-0.'
mla: Hariz Belgacem, Khaled, et al. “Fractional Variational Integrators Based on
Convolution Quadrature.” Journal of Nonlinear Science, vol. 35, no. 2,
38, Springer Science and Business Media LLC, 2025, doi:10.1007/s00332-025-10131-0.
short: K. Hariz Belgacem, F. Jiménez, S. Ober-Blöbaum, Journal of Nonlinear Science
35 (2025).
date_created: 2025-02-24T11:52:16Z
date_updated: 2025-02-24T11:55:58Z
doi: 10.1007/s00332-025-10131-0
intvolume: ' 35'
issue: '2'
language:
- iso: eng
publication: Journal of Nonlinear Science
publication_identifier:
issn:
- 0938-8974
- 1432-1467
publication_status: published
publisher: Springer Science and Business Media LLC
status: public
title: Fractional Variational Integrators Based on Convolution Quadrature
type: journal_article
user_id: '98857'
volume: 35
year: '2025'
...
---
_id: '58556'
abstract:
- lang: eng
text: 'To predict and prevent uneven tire wear in addition to a reduction of overall
tire wear, it is essential to estimate not only the total amount of wear but also
how the wear is distributed across the tire width. This requires knowledge of
the frictional power distribution in the tire contact patch, which is the basis
for calculating tire wear using a wear law. Usually, only 3D structural tire models
can generate such distributed contact results. However, they involve high computational
costs and cannot be used for comprehensive optimization of a vehicle’s suspension
system with respect to tire wear characteristics. Hence, this contribution presents
a methodology on how to accelerate the prediction of the frictional power distribution
using two components: The structural tire model is replaced by an empirical tire
model that on its own is not able to generate distributed contact results. Therefore,
an artificial neural network is trained to predict the desired contact results
from the kinematic quantities calculated by the empirical tire model. In the initial
training phase, both components are fitted to data generated by the original complex
tire model. After training, the empirical tire model can replace the structural
tire model in vehicle simulations, resulting in significantly shorter calculation
times. The simulation results are fed into the artificial neural network, which
predicts the frictional power distributions over the tire width with negligible
additional effort. Overall, the methodology reduces calculation time for the prediction
of tire wear based on virtual test drives to approximately 25% of the time needed
when using structural tire models.'
article_type: original
author:
- first_name: Lars
full_name: Muth, Lars
id: '77313'
last_name: Muth
orcid: 0000-0002-2938-5616
- first_name: Raphael
full_name: Zharia, Raphael
last_name: Zharia
- first_name: Hürkan
full_name: Sahin, Hürkan
last_name: Sahin
- first_name: Walter
full_name: Sextro, Walter
id: '21220'
last_name: Sextro
citation:
ama: Muth L, Zharia R, Sahin H, Sextro W. Prediction of the Frictional Power Distribution
in the Tire Contact Patch Based on an Empirical Tire Model and an Artificial Neural
Network. Tire Science and Technology. Published online 2025. doi:https://doi.org/10.2346/TST-24-009
apa: Muth, L., Zharia, R., Sahin, H., & Sextro, W. (2025). Prediction of the
Frictional Power Distribution in the Tire Contact Patch Based on an Empirical
Tire Model and an Artificial Neural Network. Tire Science and Technology.
https://doi.org/10.2346/TST-24-009
bibtex: '@article{Muth_Zharia_Sahin_Sextro_2025, title={Prediction of the Frictional
Power Distribution in the Tire Contact Patch Based on an Empirical Tire Model
and an Artificial Neural Network}, DOI={https://doi.org/10.2346/TST-24-009},
journal={Tire Science and Technology}, publisher={The Tire Society}, author={Muth,
Lars and Zharia, Raphael and Sahin, Hürkan and Sextro, Walter}, year={2025} }'
chicago: Muth, Lars, Raphael Zharia, Hürkan Sahin, and Walter Sextro. “Prediction
of the Frictional Power Distribution in the Tire Contact Patch Based on an Empirical
Tire Model and an Artificial Neural Network.” Tire Science and Technology,
2025. https://doi.org/10.2346/TST-24-009.
ieee: 'L. Muth, R. Zharia, H. Sahin, and W. Sextro, “Prediction of the Frictional
Power Distribution in the Tire Contact Patch Based on an Empirical Tire Model
and an Artificial Neural Network,” Tire Science and Technology, 2025, doi:
https://doi.org/10.2346/TST-24-009.'
mla: Muth, Lars, et al. “Prediction of the Frictional Power Distribution in the
Tire Contact Patch Based on an Empirical Tire Model and an Artificial Neural Network.”
Tire Science and Technology, The Tire Society, 2025, doi:https://doi.org/10.2346/TST-24-009.
short: L. Muth, R. Zharia, H. Sahin, W. Sextro, Tire Science and Technology (2025).
date_created: 2025-02-10T19:54:28Z
date_updated: 2025-02-27T19:53:09Z
department:
- _id: '151'
- _id: '9'
doi: https://doi.org/10.2346/TST-24-009
extern: '1'
language:
- iso: eng
publication: Tire Science and Technology
publication_status: epub_ahead
publisher: The Tire Society
quality_controlled: '1'
status: public
title: Prediction of the Frictional Power Distribution in the Tire Contact Patch Based
on an Empirical Tire Model and an Artificial Neural Network
type: journal_article
user_id: '77313'
year: '2025'
...
---
_id: '59229'
abstract:
- lang: eng
text: Die Nahrungszubereitung als zentraler Bestandteil eines haushaltsbezogenen
Unterrichts dient der Anbahnung von Kompetenzen für die Zubereitung von Speisen
und die Gestaltung von Mahlzeiten unter Berücksichtigung von Gesundheit und Nachhaltigkeit.
Ebenso bedeutsam, jedoch häufig vernachlässigt, ist die Berücksichtigung unterschiedlicher
Esskulturen, lebensweltlicher Erfahrungen und sozioökonomischer Hintergründe der
Lernenden.
author:
- first_name: Kirsten
full_name: Schlegel-Matthies, Kirsten
last_name: Schlegel-Matthies
citation:
ama: Schlegel-Matthies K. Essen in der Vielfalt – Esskultur und Nahrungszubereitung.
HiBiFo – Haushalt in Bildung & Forschung. 2025;14(1):49-63. doi:10.3224/hibifo.v14i1.05
apa: Schlegel-Matthies, K. (2025). Essen in der Vielfalt – Esskultur und Nahrungszubereitung.
HiBiFo – Haushalt in Bildung & Forschung, 14(1), 49–63.
https://doi.org/10.3224/hibifo.v14i1.05
bibtex: '@article{Schlegel-Matthies_2025, title={Essen in der Vielfalt – Esskultur
und Nahrungszubereitung}, volume={14}, DOI={10.3224/hibifo.v14i1.05},
number={1}, journal={HiBiFo – Haushalt in Bildung & Forschung}, publisher={Verlag
Barbara Budrich GmbH}, author={Schlegel-Matthies, Kirsten}, year={2025}, pages={49–63}
}'
chicago: 'Schlegel-Matthies, Kirsten. “Essen in der Vielfalt – Esskultur und Nahrungszubereitung.”
HiBiFo – Haushalt in Bildung & Forschung 14, no. 1 (2025): 49–63.
https://doi.org/10.3224/hibifo.v14i1.05.'
ieee: 'K. Schlegel-Matthies, “Essen in der Vielfalt – Esskultur und Nahrungszubereitung,”
HiBiFo – Haushalt in Bildung & Forschung, vol. 14, no. 1, pp. 49–63,
2025, doi: 10.3224/hibifo.v14i1.05.'
mla: Schlegel-Matthies, Kirsten. “Essen in der Vielfalt – Esskultur und Nahrungszubereitung.”
HiBiFo – Haushalt in Bildung & Forschung, vol. 14, no. 1, Verlag
Barbara Budrich GmbH, 2025, pp. 49–63, doi:10.3224/hibifo.v14i1.05.
short: K. Schlegel-Matthies, HiBiFo – Haushalt in Bildung & Forschung 14
(2025) 49–63.
date_created: 2025-04-01T08:50:40Z
date_updated: 2025-04-01T08:53:14Z
department:
- _id: '35'
- _id: '17'
- _id: '22'
- _id: '396'
doi: 10.3224/hibifo.v14i1.05
intvolume: ' 14'
issue: '1'
language:
- iso: ger
page: 49-63
publication: HiBiFo – Haushalt in Bildung & Forschung
publication_identifier:
issn:
- 2193-8806
- 2196-1662
publication_status: published
publisher: Verlag Barbara Budrich GmbH
status: public
title: Essen in der Vielfalt – Esskultur und Nahrungszubereitung
type: journal_article
user_id: '459'
volume: 14
year: '2025'
...
---
_id: '59239'
abstract:
- lang: ger
text: Diese Arbeit behandelt die Modellierung und Optimierung von mit Phasenwechselmaterialien
(PCM) ausgestatteten, energietechnischen Komponenten anhand zweier Fallstudien.
PCM sind Materialien, deren Phasenwechseleigenschaften während des Schmelzens
und Erstarrens für Heiz- und Kühlzwecke genutzt werden. Zunächst werden die theoretischen
Grundlagen zu Wärmeübertragungsproblemen mit Phasenwechsel erörtert und entsprechende
numerische Lösungsmethoden diskutiert. Ein Modell für Phasenwechselvorgänge wird
vorgestellt, welches anhand analytischer Lösungen validiert wurde und in den Fallstudien
zum Einsatz kam. Für beide Fallstudien wird der Stand der Technik erörtert und
die entsprechenden Forschungsfragen werden formuliert. Die erste Fallstudie behandelt
PCM-integrierte Photovoltaikmodule und die zweite Festbett-Latentwärmespeicher,
welche nicht-kugelförmiger PCM-Kapseln verwenden. Für beide Systeme wurden thermische
Model-le entwickelt und anhand experimenteller Daten mit guter Genauigkeit validiert.
Diese Modelle wurden in Parameterstudien eingesetzt, um optimierte Systemkonfigurationen
zu identifizieren. Die vorgestellten Ergebnisse zeigen, dass ein PCM-Kühlkörper
mit ausreichender Dicke und Wärmeleitfähigkeit den Wirkungsgrad und die Lebensdauer
von Photovoltaikmodulen erheblich erhöht. Darüber hinaus verbessern PCM-Kapseln
mit hoher Packungs-dichte und Oberfläche sowohl die volumenspezifische Speicherkapazität
als auch die thermische Leistung von Festbett-Latentwärmespeichern.
- lang: eng
text: This thesis explores the modeling and optimization of energy system components
incorporating phase change materials (PCM) through two different case studies.
PCM are materials whose phase change characteristics during melting and solidification
are utilized for heating and cooling purposes. The theoretical foundations of
heat transfer problems involving phase change, along with the relevant numerical
solution methods, are discussed. A phase change model is presented, which was
validated against analytical solutions and applied in the case studies. For both
case studies, a review of the state of the art is provided, followed by the formulation
of specific research problems. The first case study investigated PCM-enhanced
photovoltaic modules, while the second focused on packed bed latent heat storages
(PBLHS) utilizing non-spherical PCM capsules. Thermal models were developed for
both systems and validated with good accuracy against experimental data. These
models were employed in parameter studies to identify optimized system configurations.
The presented results demonstrate that a PCM heat sink with sufficient thickness
and thermal conductivity can significantly improve the efficiency and lifespan
of photovoltaic modules. Furthermore, PCM capsules with both high packing density
and surface area increase the volume-specific storage capacity and thermal power
output of PBLHS.
author:
- first_name: Matti
full_name: Grabo, Matti
id: '66520'
last_name: Grabo
citation:
ama: Grabo M. Modeling and Optimization of Energy System Components Equipped
with Phase Change Materials.; 2025. doi:10.17619/UNIPB/1-2199
apa: Grabo, M. (2025). Modeling and optimization of energy system components
equipped with phase change materials. https://doi.org/10.17619/UNIPB/1-2199
bibtex: '@book{Grabo_2025, place={Paderborn}, title={Modeling and optimization of
energy system components equipped with phase change materials}, DOI={10.17619/UNIPB/1-2199},
author={Grabo, Matti}, year={2025} }'
chicago: Grabo, Matti. Modeling and Optimization of Energy System Components
Equipped with Phase Change Materials. Paderborn, 2025. https://doi.org/10.17619/UNIPB/1-2199.
ieee: M. Grabo, Modeling and optimization of energy system components equipped
with phase change materials. Paderborn, 2025.
mla: Grabo, Matti. Modeling and Optimization of Energy System Components Equipped
with Phase Change Materials. 2025, doi:10.17619/UNIPB/1-2199.
short: M. Grabo, Modeling and Optimization of Energy System Components Equipped
with Phase Change Materials, Paderborn, 2025.
date_created: 2025-04-02T09:25:58Z
date_updated: 2025-04-02T09:44:05Z
department:
- _id: '9'
doi: 10.17619/UNIPB/1-2199
keyword:
- Heat transfer
- PCM
- numerical simulation
- renewable energy
- heat storage
language:
- iso: eng
place: Paderborn
publication_status: published
status: public
supervisor:
- first_name: Eugeny
full_name: Kenig, Eugeny
id: '665'
last_name: Kenig
title: Modeling and optimization of energy system components equipped with phase change
materials
type: dissertation
user_id: '66520'
year: '2025'
...
---
_id: '60186'
author:
- first_name: A
full_name: Lang, A
last_name: Lang
- first_name: E
full_name: Schaefer, E
last_name: Schaefer
- first_name: Y
full_name: Kupriyanova, Y
last_name: Kupriyanova
- first_name: J
full_name: Goletzke, J
last_name: Goletzke
- first_name: KS
full_name: Weber, KS
last_name: Weber
- first_name: Anette
full_name: Buyken, Anette
id: '65985'
last_name: Buyken
- first_name: S
full_name: Kahl, S
last_name: Kahl
- first_name: OP
full_name: Zaharia, OP
last_name: Zaharia
- first_name: C
full_name: Herder, C
last_name: Herder
- first_name: VB
full_name: Schrauwen-Hinderling, VB
last_name: Schrauwen-Hinderling
- first_name: O
full_name: Kuss, O
last_name: Kuss
- first_name: R
full_name: Wagner, R
last_name: Wagner
- first_name: M
full_name: Roden, M
last_name: Roden
- first_name: S
full_name: Schlesinger, S
last_name: Schlesinger
- first_name: German
full_name: Diabetes Study Group, German
last_name: Diabetes Study Group
citation:
ama: Lang A, Schaefer E, Kupriyanova Y, et al. Cross-sectional association between
the isocaloric replacement of carbohydrates with protein and fat in relation to
fat compartments distribution and hepatic lipid content in recent-onset type 1
and type 2 diabetes. Nutr J. 2025;24(1):74.
apa: Lang, A., Schaefer, E., Kupriyanova, Y., Goletzke, J., Weber, K., Buyken, A.,
Kahl, S., Zaharia, O., Herder, C., Schrauwen-Hinderling, V., Kuss, O., Wagner,
R., Roden, M., Schlesinger, S., & Diabetes Study Group, G. (2025). Cross-sectional
association between the isocaloric replacement of carbohydrates with protein and
fat in relation to fat compartments distribution and hepatic lipid content in
recent-onset type 1 and type 2 diabetes. Nutr J, 24(1), 74.
bibtex: '@article{Lang_Schaefer_Kupriyanova_Goletzke_Weber_Buyken_Kahl_Zaharia_Herder_Schrauwen-Hinderling_et
al._2025, title={Cross-sectional association between the isocaloric replacement
of carbohydrates with protein and fat in relation to fat compartments distribution
and hepatic lipid content in recent-onset type 1 and type 2 diabetes.}, volume={24},
number={1}, journal={Nutr J}, author={Lang, A and Schaefer, E and Kupriyanova,
Y and Goletzke, J and Weber, KS and Buyken, Anette and Kahl, S and Zaharia, OP
and Herder, C and Schrauwen-Hinderling, VB and et al.}, year={2025}, pages={74}
}'
chicago: 'Lang, A, E Schaefer, Y Kupriyanova, J Goletzke, KS Weber, Anette Buyken,
S Kahl, et al. “Cross-Sectional Association between the Isocaloric Replacement
of Carbohydrates with Protein and Fat in Relation to Fat Compartments Distribution
and Hepatic Lipid Content in Recent-Onset Type 1 and Type 2 Diabetes.” Nutr
J 24, no. 1 (2025): 74.'
ieee: A. Lang et al., “Cross-sectional association between the isocaloric
replacement of carbohydrates with protein and fat in relation to fat compartments
distribution and hepatic lipid content in recent-onset type 1 and type 2 diabetes.,”
Nutr J, vol. 24, no. 1, p. 74, 2025.
mla: Lang, A., et al. “Cross-Sectional Association between the Isocaloric Replacement
of Carbohydrates with Protein and Fat in Relation to Fat Compartments Distribution
and Hepatic Lipid Content in Recent-Onset Type 1 and Type 2 Diabetes.” Nutr
J, vol. 24, no. 1, 2025, p. 74.
short: A. Lang, E. Schaefer, Y. Kupriyanova, J. Goletzke, K. Weber, A. Buyken, S.
Kahl, O. Zaharia, C. Herder, V. Schrauwen-Hinderling, O. Kuss, R. Wagner, M. Roden,
S. Schlesinger, G. Diabetes Study Group, Nutr J 24 (2025) 74.
date_created: 2025-06-11T08:54:08Z
date_updated: 2025-06-11T08:55:22Z
department:
- _id: '22'
external_id:
pmid:
- '40349038'
intvolume: ' 24'
issue: '1'
language:
- iso: eng
page: '74'
pmid: '1'
publication: Nutr J
publication_identifier:
issn:
- 1475-2891
status: public
title: Cross-sectional association between the isocaloric replacement of carbohydrates
with protein and fat in relation to fat compartments distribution and hepatic lipid
content in recent-onset type 1 and type 2 diabetes.
type: journal_article
user_id: '92491'
volume: 24
year: '2025'
...
---
_id: '60182'
author:
- first_name: I
full_name: Perrar, I
last_name: Perrar
- first_name: E
full_name: Hohoff, E
last_name: Hohoff
- first_name: A
full_name: Lesani, A
last_name: Lesani
- first_name: S
full_name: Schmitting, S
last_name: Schmitting
- first_name: Lars
full_name: Libuda, Lars
id: '88682'
last_name: Libuda
orcid: 0000-0003-1603-3133
- first_name: Bettina
full_name: Krüger, Bettina
id: '49428'
last_name: Krüger
orcid: 0000-0001-5351-1785
- first_name: Bianca
full_name: Stutz, Bianca
id: '77099'
last_name: Stutz
- first_name: U
full_name: Nöthlings, U
last_name: Nöthlings
- first_name: Anette
full_name: Buyken, Anette
id: '65985'
last_name: Buyken
- first_name: U
full_name: Alexy, U
last_name: Alexy
- first_name: N
full_name: Jankovic, N
last_name: Jankovic
citation:
ama: Perrar I, Hohoff E, Lesani A, et al. Circadian eating patterns track from infancy
to pre- and primary school-age, but are not prospectively associated with body
composition in childhood - Results of the DONALD cohort study. Eur J Nutr.
2025;64(4):165.
apa: Perrar, I., Hohoff, E., Lesani, A., Schmitting, S., Libuda, L., Krüger, B.,
Stutz, B., Nöthlings, U., Buyken, A., Alexy, U., & Jankovic, N. (2025). Circadian
eating patterns track from infancy to pre- and primary school-age, but are not
prospectively associated with body composition in childhood - Results of the DONALD
cohort study. Eur J Nutr, 64(4), 165.
bibtex: '@article{Perrar_Hohoff_Lesani_Schmitting_Libuda_Krüger_Stutz_Nöthlings_Buyken_Alexy_et
al._2025, title={Circadian eating patterns track from infancy to pre- and primary
school-age, but are not prospectively associated with body composition in childhood
- Results of the DONALD cohort study.}, volume={64}, number={4}, journal={Eur
J Nutr}, author={Perrar, I and Hohoff, E and Lesani, A and Schmitting, S and Libuda,
Lars and Krüger, Bettina and Stutz, Bianca and Nöthlings, U and Buyken, Anette
and Alexy, U and et al.}, year={2025}, pages={165} }'
chicago: 'Perrar, I, E Hohoff, A Lesani, S Schmitting, Lars Libuda, Bettina Krüger,
Bianca Stutz, et al. “Circadian Eating Patterns Track from Infancy to Pre- and
Primary School-Age, but Are Not Prospectively Associated with Body Composition
in Childhood - Results of the DONALD Cohort Study.” Eur J Nutr 64, no.
4 (2025): 165.'
ieee: I. Perrar et al., “Circadian eating patterns track from infancy to
pre- and primary school-age, but are not prospectively associated with body composition
in childhood - Results of the DONALD cohort study.,” Eur J Nutr, vol. 64,
no. 4, p. 165, 2025.
mla: Perrar, I., et al. “Circadian Eating Patterns Track from Infancy to Pre- and
Primary School-Age, but Are Not Prospectively Associated with Body Composition
in Childhood - Results of the DONALD Cohort Study.” Eur J Nutr, vol. 64,
no. 4, 2025, p. 165.
short: I. Perrar, E. Hohoff, A. Lesani, S. Schmitting, L. Libuda, B. Krüger, B.
Stutz, U. Nöthlings, A. Buyken, U. Alexy, N. Jankovic, Eur J Nutr 64 (2025) 165.
date_created: 2025-06-11T08:49:19Z
date_updated: 2025-06-11T08:51:28Z
department:
- _id: '22'
external_id:
pmid:
- '40285866'
intvolume: ' 64'
issue: '4'
language:
- iso: eng
page: '165'
pmid: '1'
publication: Eur J Nutr
publication_identifier:
issn:
- 1436-6207
- 1436-6215
status: public
title: Circadian eating patterns track from infancy to pre- and primary school-age,
but are not prospectively associated with body composition in childhood - Results
of the DONALD cohort study.
type: journal_article
user_id: '92491'
volume: 64
year: '2025'
...
---
_id: '60184'
author:
- first_name: KA
full_name: Della Corte, KA
last_name: Della Corte
- first_name: T
full_name: Bosler, T
last_name: Bosler
- first_name: C
full_name: McClure, C
last_name: McClure
- first_name: Anette
full_name: Buyken, Anette
id: '65985'
last_name: Buyken
- first_name: JD
full_name: LeCheminant, JD
last_name: LeCheminant
- first_name: L
full_name: Schwingshackl, L
last_name: Schwingshackl
- first_name: D
full_name: Della Corte, D
last_name: Della Corte
citation:
ama: 'Della Corte K, Bosler T, McClure C, et al. Dietary Sugar Intake and Incident
Type 2 Diabetes Risk: A Systematic Review and Dose-Response Meta-Analysis of Prospective
Cohort Studies. Adv Nutr. 2025;16(5):100413.'
apa: 'Della Corte, K., Bosler, T., McClure, C., Buyken, A., LeCheminant, J., Schwingshackl,
L., & Della Corte, D. (2025). Dietary Sugar Intake and Incident Type 2 Diabetes
Risk: A Systematic Review and Dose-Response Meta-Analysis of Prospective Cohort
Studies. Adv Nutr, 16(5), 100413.'
bibtex: '@article{Della Corte_Bosler_McClure_Buyken_LeCheminant_Schwingshackl_Della
Corte_2025, title={Dietary Sugar Intake and Incident Type 2 Diabetes Risk: A Systematic
Review and Dose-Response Meta-Analysis of Prospective Cohort Studies.}, volume={16},
number={5}, journal={Adv Nutr}, author={Della Corte, KA and Bosler, T and McClure,
C and Buyken, Anette and LeCheminant, JD and Schwingshackl, L and Della Corte,
D}, year={2025}, pages={100413} }'
chicago: 'Della Corte, KA, T Bosler, C McClure, Anette Buyken, JD LeCheminant, L
Schwingshackl, and D Della Corte. “Dietary Sugar Intake and Incident Type 2 Diabetes
Risk: A Systematic Review and Dose-Response Meta-Analysis of Prospective Cohort
Studies.” Adv Nutr 16, no. 5 (2025): 100413.'
ieee: 'K. Della Corte et al., “Dietary Sugar Intake and Incident Type 2 Diabetes
Risk: A Systematic Review and Dose-Response Meta-Analysis of Prospective Cohort
Studies.,” Adv Nutr, vol. 16, no. 5, p. 100413, 2025.'
mla: 'Della Corte, KA, et al. “Dietary Sugar Intake and Incident Type 2 Diabetes
Risk: A Systematic Review and Dose-Response Meta-Analysis of Prospective Cohort
Studies.” Adv Nutr, vol. 16, no. 5, 2025, p. 100413.'
short: K. Della Corte, T. Bosler, C. McClure, A. Buyken, J. LeCheminant, L. Schwingshackl,
D. Della Corte, Adv Nutr 16 (2025) 100413.
date_created: 2025-06-11T08:51:45Z
date_updated: 2025-06-11T08:52:32Z
department:
- _id: '22'
external_id:
pmid:
- '40122386'
intvolume: ' 16'
issue: '5'
language:
- iso: eng
page: '100413'
pmid: '1'
publication: Adv Nutr
publication_identifier:
issn:
- 2161-8313
- 2156-5376
status: public
title: 'Dietary Sugar Intake and Incident Type 2 Diabetes Risk: A Systematic Review
and Dose-Response Meta-Analysis of Prospective Cohort Studies.'
type: journal_article
user_id: '92491'
volume: 16
year: '2025'
...
---
_id: '60187'
author:
- first_name: I
full_name: Revheim, I
last_name: Revheim
- first_name: Z
full_name: Sabir, Z
last_name: Sabir
- first_name: J
full_name: Dierkes, J
last_name: Dierkes
- first_name: Anette
full_name: Buyken, Anette
id: '65985'
last_name: Buyken
- first_name: R
full_name: Landberg, R
last_name: Landberg
- first_name: I
full_name: Alten, I
last_name: Alten
- first_name: U
full_name: Spielau, U
last_name: Spielau
- first_name: H
full_name: Rosendahl-Riise, H
last_name: Rosendahl-Riise
citation:
ama: 'Revheim I, Sabir Z, Dierkes J, et al. Bread, wholegrain consumption and weight
change from middle to late adulthood: a prospective cohort study. . Eur J Nutr.
2025;64(5):197.'
apa: 'Revheim, I., Sabir, Z., Dierkes, J., Buyken, A., Landberg, R., Alten, I.,
Spielau, U., & Rosendahl-Riise, H. (2025). Bread, wholegrain consumption and
weight change from middle to late adulthood: a prospective cohort study. . Eur
J Nutr, 64(5), 197.'
bibtex: '@article{Revheim_Sabir_Dierkes_Buyken_Landberg_Alten_Spielau_Rosendahl-Riise_2025,
title={Bread, wholegrain consumption and weight change from middle to late adulthood:
a prospective cohort study. }, volume={64}, number={5}, journal={Eur J Nutr},
author={Revheim, I and Sabir, Z and Dierkes, J and Buyken, Anette and Landberg,
R and Alten, I and Spielau, U and Rosendahl-Riise, H}, year={2025}, pages={197}
}'
chicago: 'Revheim, I, Z Sabir, J Dierkes, Anette Buyken, R Landberg, I Alten, U
Spielau, and H Rosendahl-Riise. “Bread, Wholegrain Consumption and Weight Change
from Middle to Late Adulthood: A Prospective Cohort Study. .” Eur J Nutr
64, no. 5 (2025): 197.'
ieee: 'I. Revheim et al., “Bread, wholegrain consumption and weight change
from middle to late adulthood: a prospective cohort study. ,” Eur J Nutr,
vol. 64, no. 5, p. 197, 2025.'
mla: 'Revheim, I., et al. “Bread, Wholegrain Consumption and Weight Change from
Middle to Late Adulthood: A Prospective Cohort Study. .” Eur J Nutr, vol.
64, no. 5, 2025, p. 197.'
short: I. Revheim, Z. Sabir, J. Dierkes, A. Buyken, R. Landberg, I. Alten, U. Spielau,
H. Rosendahl-Riise, Eur J Nutr 64 (2025) 197.
date_created: 2025-06-11T08:55:41Z
date_updated: 2025-06-11T08:56:45Z
department:
- _id: '22'
external_id:
pmid:
- '40445392'
intvolume: ' 64'
issue: '5'
language:
- iso: eng
page: '197'
pmid: '1'
publication: Eur J Nutr
publication_identifier:
issn:
- 1436-6207
- 1436-6215
status: public
title: 'Bread, wholegrain consumption and weight change from middle to late adulthood:
a prospective cohort study. '
type: journal_article
user_id: '92491'
volume: 64
year: '2025'
...
---
_id: '60181'
author:
- first_name: I
full_name: Dannheim, I
last_name: Dannheim
- first_name: H
full_name: Ludwig-Walz, H
last_name: Ludwig-Walz
- first_name: H
full_name: Kirsch, H
last_name: Kirsch
- first_name: M
full_name: Bujard, M
last_name: Bujard
- first_name: Anette
full_name: Buyken, Anette
id: '65985'
last_name: Buyken
- first_name: KM
full_name: Richardson, KM
last_name: Richardson
- first_name: A
full_name: Kroke, A
last_name: Kroke
citation:
ama: 'Dannheim I, Ludwig-Walz H, Kirsch H, et al. Effectiveness of leader-targeted
stress management interventions: A systematic review and meta-analysis. Scand
J Work Environ Health. Published online 2025:4219.'
apa: 'Dannheim, I., Ludwig-Walz, H., Kirsch, H., Bujard, M., Buyken, A., Richardson,
K., & Kroke, A. (2025). Effectiveness of leader-targeted stress management
interventions: A systematic review and meta-analysis. Scand J Work Environ
Health, 4219.'
bibtex: '@article{Dannheim_Ludwig-Walz_Kirsch_Bujard_Buyken_Richardson_Kroke_2025,
title={Effectiveness of leader-targeted stress management interventions: A systematic
review and meta-analysis.}, journal={Scand J Work Environ Health}, author={Dannheim,
I and Ludwig-Walz, H and Kirsch, H and Bujard, M and Buyken, Anette and Richardson,
KM and Kroke, A}, year={2025}, pages={4219} }'
chicago: 'Dannheim, I, H Ludwig-Walz, H Kirsch, M Bujard, Anette Buyken, KM Richardson,
and A Kroke. “Effectiveness of Leader-Targeted Stress Management Interventions:
A Systematic Review and Meta-Analysis.” Scand J Work Environ Health, 2025,
4219.'
ieee: 'I. Dannheim et al., “Effectiveness of leader-targeted stress management
interventions: A systematic review and meta-analysis.,” Scand J Work Environ
Health, p. 4219, 2025.'
mla: 'Dannheim, I., et al. “Effectiveness of Leader-Targeted Stress Management Interventions:
A Systematic Review and Meta-Analysis.” Scand J Work Environ Health, 2025,
p. 4219.'
short: I. Dannheim, H. Ludwig-Walz, H. Kirsch, M. Bujard, A. Buyken, K. Richardson,
A. Kroke, Scand J Work Environ Health (2025) 4219.
date_created: 2025-06-11T08:48:08Z
date_updated: 2025-06-11T08:48:49Z
department:
- _id: '22'
external_id:
pmid:
- '40101167'
language:
- iso: eng
page: '4219'
pmid: '1'
publication: Scand J Work Environ Health
publication_identifier:
issn:
- 0355-3140
- 1795-990x
status: public
title: 'Effectiveness of leader-targeted stress management interventions: A systematic
review and meta-analysis.'
type: journal_article
user_id: '92491'
year: '2025'
...
---
_id: '60136'
abstract:
- lang: eng
text: Modulation conditioned on measurements on entangled photonic quantum
states is a cornerstone technology of optical quantum information processing.
Performing this task with low latency requires combining single-photon-level detectors
with both electronic logic processing and optical modulation in close proximity.
Here, we demonstrate low-latency feedforward using a quasi-photon-number-resolved
measurement on a quantum light source. Specifically, we use a multipixel superconducting
nanowire single-photon detector, amplifier, logic, and an integrated electro-optic
modulator in situ below 4 K. We modulate
the signal mode of a spontaneous parametric down-conversion source, conditional
on a photon-number measurement of the idler mode, with a total latency of (23±3)ns.
Furthermore, we investigate the resulting change in the photon statistics. This
represents an important benchmark for the fastest quantum photonic feedforward
experiments comprising measurement, amplification, logic, and modulation. This
has direct applications in quantum computing, communication, and simulation protocols.
article_number: '720'
author:
- first_name: Frederik
full_name: Thiele, Frederik
id: '50819'
last_name: Thiele
orcid: 0000-0003-0663-5587
- first_name: Niklas
full_name: Lamberty, Niklas
id: '75307'
last_name: Lamberty
- first_name: Thomas
full_name: Hummel, Thomas
id: '83846'
last_name: Hummel
orcid: 0000-0001-8627-2119
- first_name: Nina Amelie
full_name: Lange, Nina Amelie
id: '56843'
last_name: Lange
orcid: 0000-0001-6624-7098
- first_name: Lorenzo Manuel
full_name: Procopio Peña, Lorenzo Manuel
id: '105816'
last_name: Procopio Peña
- first_name: Aishi
full_name: Barua, Aishi
id: '104502'
last_name: Barua
- first_name: Sebastian
full_name: Lengeling, Sebastian
id: '44373'
last_name: Lengeling
- first_name: Viktor
full_name: Quiring, Viktor
last_name: Quiring
- first_name: Christof
full_name: Eigner, Christof
id: '13244'
last_name: Eigner
orcid: https://orcid.org/0000-0002-5693-3083
- first_name: Christine
full_name: Silberhorn, Christine
id: '26263'
last_name: Silberhorn
- first_name: Tim
full_name: Bartley, Tim
id: '49683'
last_name: Bartley
citation:
ama: Thiele F, Lamberty N, Hummel T, et al. Cryogenic feedforward of a photonic
quantum state. Optica. 2025;12(5). doi:10.1364/optica.551287
apa: Thiele, F., Lamberty, N., Hummel, T., Lange, N. A., Procopio Peña, L. M., Barua,
A., Lengeling, S., Quiring, V., Eigner, C., Silberhorn, C., & Bartley, T.
(2025). Cryogenic feedforward of a photonic quantum state. Optica, 12(5),
Article 720. https://doi.org/10.1364/optica.551287
bibtex: '@article{Thiele_Lamberty_Hummel_Lange_Procopio Peña_Barua_Lengeling_Quiring_Eigner_Silberhorn_et
al._2025, title={Cryogenic feedforward of a photonic quantum state}, volume={12},
DOI={10.1364/optica.551287},
number={5720}, journal={Optica}, publisher={Optica Publishing Group}, author={Thiele,
Frederik and Lamberty, Niklas and Hummel, Thomas and Lange, Nina Amelie and Procopio
Peña, Lorenzo Manuel and Barua, Aishi and Lengeling, Sebastian and Quiring, Viktor
and Eigner, Christof and Silberhorn, Christine and et al.}, year={2025} }'
chicago: Thiele, Frederik, Niklas Lamberty, Thomas Hummel, Nina Amelie Lange, Lorenzo
Manuel Procopio Peña, Aishi Barua, Sebastian Lengeling, et al. “Cryogenic Feedforward
of a Photonic Quantum State.” Optica 12, no. 5 (2025). https://doi.org/10.1364/optica.551287.
ieee: 'F. Thiele et al., “Cryogenic feedforward of a photonic quantum state,”
Optica, vol. 12, no. 5, Art. no. 720, 2025, doi: 10.1364/optica.551287.'
mla: Thiele, Frederik, et al. “Cryogenic Feedforward of a Photonic Quantum State.”
Optica, vol. 12, no. 5, 720, Optica Publishing Group, 2025, doi:10.1364/optica.551287.
short: F. Thiele, N. Lamberty, T. Hummel, N.A. Lange, L.M. Procopio Peña, A. Barua,
S. Lengeling, V. Quiring, C. Eigner, C. Silberhorn, T. Bartley, Optica 12 (2025).
date_created: 2025-06-04T18:34:16Z
date_updated: 2025-06-12T09:56:47Z
doi: 10.1364/optica.551287
intvolume: ' 12'
issue: '5'
language:
- iso: eng
publication: Optica
publication_identifier:
issn:
- 2334-2536
publication_status: published
publisher: Optica Publishing Group
status: public
title: Cryogenic feedforward of a photonic quantum state
type: journal_article
user_id: '56843'
volume: 12
year: '2025'
...
---
_id: '60174'
abstract:
- lang: eng
text: Fähigkeiten zur Wahrnehmung und Regulation von Emotionen sind von
besonderer Relevanz für Studierende, da Fördermaßnahmen im Bereich der Emotionsregulation
auch positive Effekte auf die Studienqualität, den Studienerfolg und die allgemeine
Persönlichkeitsentwicklung haben können. Jedoch wird diesem Thema wenig Aufmerksamkeit
geschenkt und hochschuldidaktisch steht die Gestaltung von kognitiven und inhaltsbezogenen
Lernarrangements im Zentrum. Die Einbindung von Gelegenheiten zur Emotionsreflexion
in die Lehre bietet eine niederschwellige Maßnahme zur Förderung emotionaler Kompetenzen,
weshalb im vorliegenden Beitrag ein Instrument zur Umsetzung dieser Aufgabe vorgeschlagen
wird.
author:
- first_name: Regine
full_name: Lehberger, Regine
id: '98966'
last_name: Lehberger
orcid: 0009-0007-0289-0288
citation:
ama: Lehberger R. Emotionsreflexion als Element universitären Lehrens und Lernens
Emotional reflection as an element of university teaching and learning. Zeitschrift
für Hochschulentwicklung. 2025;20(1). doi:10.21240/zfhe/20-1/22
apa: Lehberger, R. (2025). Emotionsreflexion als Element universitären Lehrens und
Lernens Emotional reflection as an element of university teaching and learning.
Zeitschrift für Hochschulentwicklung, 20(1). https://doi.org/10.21240/zfhe/20-1/22
bibtex: '@article{Lehberger_2025, title={Emotionsreflexion als Element universitären
Lehrens und Lernens Emotional reflection as an element of university teaching
and learning}, volume={20}, DOI={10.21240/zfhe/20-1/22},
number={1}, journal={Zeitschrift für Hochschulentwicklung}, publisher={OAPublishing
Collective}, author={Lehberger, Regine}, year={2025} }'
chicago: Lehberger, Regine. “Emotionsreflexion als Element universitären Lehrens
und Lernens Emotional reflection as an element of university teaching and learning.”
Zeitschrift für Hochschulentwicklung 20, no. 1 (2025). https://doi.org/10.21240/zfhe/20-1/22.
ieee: 'R. Lehberger, “Emotionsreflexion als Element universitären Lehrens und Lernens
Emotional reflection as an element of university teaching and learning,” Zeitschrift
für Hochschulentwicklung, vol. 20, no. 1, 2025, doi: 10.21240/zfhe/20-1/22.'
mla: Lehberger, Regine. “Emotionsreflexion als Element universitären Lehrens und
Lernens Emotional reflection as an element of university teaching and learning.”
Zeitschrift für Hochschulentwicklung, vol. 20, no. 1, OAPublishing Collective,
2025, doi:10.21240/zfhe/20-1/22.
short: R. Lehberger, Zeitschrift für Hochschulentwicklung 20 (2025).
date_created: 2025-06-11T08:03:35Z
date_updated: 2025-06-16T12:41:37Z
doi: 10.21240/zfhe/20-1/22
intvolume: ' 20'
issue: '1'
keyword:
- Emotionsreflexion
- Studierende
- Hochschullehre
- Reflexion
language:
- iso: ger
main_file_link:
- open_access: '1'
url: https://www.zfhe.at/index.php/zfhe/article/view/2141
oa: '1'
publication: Zeitschrift für Hochschulentwicklung
publication_identifier:
issn:
- 2219-6994
publication_status: published
publisher: OAPublishing Collective
quality_controlled: '1'
status: public
title: Emotionsreflexion als Element universitären Lehrens und Lernens Emotional reflection
as an element of university teaching and learning
type: journal_article
user_id: '98966'
volume: 20
year: '2025'
...
---
_id: '60299'
abstract:
- lang: eng
text: Non-rotationally symmetrical joints can have different properties that can
be controlled by the joint orientation. This hypothesis is tested using a Reuleaux
triangle joint geometry. A tool design is carried out, followed by a numerical
sensitivity analysis of the tool geometry. Initial tools were manufactured for
experimental investigations and then adapted based on the findings of the sensitivity
analysis. The joints are characterized by micrographs, 3D scans, shear tensile
tests, head tensile tests and three-point bending tests and compared with a round
geometry. The analysis confirms the hypothesis. Thus, joints with adaptable properties
can be produced with one tool set.
author:
- first_name: Christian
full_name: Steinfelder, Christian
last_name: Steinfelder
- first_name: Clemens
full_name: Acksteiner, Clemens
last_name: Acksteiner
- first_name: Alexander
full_name: Brosius, Alexander
last_name: Brosius
citation:
ama: Steinfelder C, Acksteiner C, Brosius A. A new joint with versatile properties
based on a Reuleaux triangle geometry. CIRP Annals. Published online 2025.
doi:10.1016/j.cirp.2025.03.002
apa: Steinfelder, C., Acksteiner, C., & Brosius, A. (2025). A new joint with
versatile properties based on a Reuleaux triangle geometry. CIRP Annals.
https://doi.org/10.1016/j.cirp.2025.03.002
bibtex: '@article{Steinfelder_Acksteiner_Brosius_2025, title={A new joint with versatile
properties based on a Reuleaux triangle geometry}, DOI={10.1016/j.cirp.2025.03.002},
journal={CIRP Annals}, publisher={Elsevier BV}, author={Steinfelder, Christian
and Acksteiner, Clemens and Brosius, Alexander}, year={2025} }'
chicago: Steinfelder, Christian, Clemens Acksteiner, and Alexander Brosius. “A New
Joint with Versatile Properties Based on a Reuleaux Triangle Geometry.” CIRP
Annals, 2025. https://doi.org/10.1016/j.cirp.2025.03.002.
ieee: 'C. Steinfelder, C. Acksteiner, and A. Brosius, “A new joint with versatile
properties based on a Reuleaux triangle geometry,” CIRP Annals, 2025, doi:
10.1016/j.cirp.2025.03.002.'
mla: Steinfelder, Christian, et al. “A New Joint with Versatile Properties Based
on a Reuleaux Triangle Geometry.” CIRP Annals, Elsevier BV, 2025, doi:10.1016/j.cirp.2025.03.002.
short: C. Steinfelder, C. Acksteiner, A. Brosius, CIRP Annals (2025).
date_created: 2025-06-23T07:47:56Z
date_updated: 2025-06-23T08:00:05Z
department:
- _id: '630'
doi: 10.1016/j.cirp.2025.03.002
keyword:
- Joining
- Forming
- Property adjustment
language:
- iso: eng
project:
- _id: '130'
grant_number: '418701707'
name: 'TRR 285: TRR 285: Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen
Prozessketten'
- _id: '132'
name: 'TRR 285 - B: TRR 285 - Project Area B'
- _id: '140'
name: 'TRR 285 – B01: TRR 285 - Subproject B01'
publication: CIRP Annals
publication_identifier:
issn:
- 0007-8506
publication_status: published
publisher: Elsevier BV
status: public
title: A new joint with versatile properties based on a Reuleaux triangle geometry
type: journal_article
user_id: '104464'
year: '2025'
...
---
_id: '60336'
author:
- first_name: Kirsten
full_name: Schlegel-Matthies, Kirsten
id: '459'
last_name: Schlegel-Matthies
citation:
ama: Schlegel-Matthies K. Essen in der Vielfalt – Esskultur und Nahrungszubereitung.
Haushalt in Bildung und Forschung. 2025:49-63.
apa: Schlegel-Matthies, K. (2025). Essen in der Vielfalt – Esskultur und Nahrungszubereitung.
Haushalt in Bildung und Forschung, 14(1), 49–63.
bibtex: '@article{Schlegel-Matthies_2025, title={Essen in der Vielfalt – Esskultur
und Nahrungszubereitung}, volume={14}, number={1}, journal={Haushalt in Bildung
und Forschung}, author={Schlegel-Matthies, Kirsten}, year={2025}, pages={49–63}
}'
chicago: Schlegel-Matthies, Kirsten. “Essen in der Vielfalt – Esskultur und Nahrungszubereitung.”
Haushalt in Bildung und Forschung, 2025.
ieee: K. Schlegel-Matthies, “Essen in der Vielfalt – Esskultur und Nahrungszubereitung,”
Haushalt in Bildung und Forschung, vol. 14, no. 1, pp. 49–63, 2025.
mla: Schlegel-Matthies, Kirsten. “Essen in der Vielfalt – Esskultur und Nahrungszubereitung.”
Haushalt in Bildung und Forschung, vol. 14, no. 1, 2025, pp. 49–63.
short: K. Schlegel-Matthies, Haushalt in Bildung und Forschung 14 (2025) 49–63.
date_created: 2025-06-23T10:48:51Z
date_updated: 2025-06-23T10:49:05Z
department:
- _id: '35'
- _id: '17'
- _id: '22'
- _id: '396'
intvolume: ' 14'
issue: '1'
language:
- iso: ger
page: 49-63
publication: Haushalt in Bildung und Forschung
publication_date: 01.03.2025
publication_identifier:
eissn:
- 2196-1662
issn:
- 2193-8806
publication_status: published
status: public
title: Essen in der Vielfalt – Esskultur und Nahrungszubereitung
type: newspaper_article
user_id: '459'
volume: 14
year: '2025'
...
---
_id: '60471'
author:
- first_name: N
full_name: Knoll-Pientka, N
last_name: Knoll-Pientka
- first_name: D
full_name: Schils, D
last_name: Schils
- first_name: K
full_name: Pasternak, K
last_name: Pasternak
- first_name: S
full_name: Czarnetzky, S
last_name: Czarnetzky
- first_name: C
full_name: Jansen, C
last_name: Jansen
- first_name: G
full_name: Gradl-Dietsch, G
last_name: Gradl-Dietsch
- first_name: J
full_name: Seitz, J
last_name: Seitz
- first_name: EM
full_name: Skoda, EM
last_name: Skoda
- first_name: Lars
full_name: Libuda, Lars
id: '88682'
last_name: Libuda
orcid: 0000-0003-1603-3133
- first_name: A
full_name: Schweda, A
last_name: Schweda
- first_name: M
full_name: Teufel, M
last_name: Teufel
citation:
ama: Knoll-Pientka N, Schils D, Pasternak K, et al. Can bioelectrical impedance
analysis be used to identify water loading in patients with anorexia nervosa?-
Implications from experimental measurements in young, healthy, and normal weight
women. J Eat Disord. 2025;13(1):87.
apa: Knoll-Pientka, N., Schils, D., Pasternak, K., Czarnetzky, S., Jansen, C., Gradl-Dietsch,
G., Seitz, J., Skoda, E., Libuda, L., Schweda, A., & Teufel, M. (2025). Can
bioelectrical impedance analysis be used to identify water loading in patients
with anorexia nervosa?- Implications from experimental measurements in young,
healthy, and normal weight women. J Eat Disord, 13(1), 87.
bibtex: '@article{Knoll-Pientka_Schils_Pasternak_Czarnetzky_Jansen_Gradl-Dietsch_Seitz_Skoda_Libuda_Schweda_et
al._2025, title={Can bioelectrical impedance analysis be used to identify water
loading in patients with anorexia nervosa?- Implications from experimental measurements
in young, healthy, and normal weight women.}, volume={13}, number={1}, journal={J
Eat Disord}, author={Knoll-Pientka, N and Schils, D and Pasternak, K and Czarnetzky,
S and Jansen, C and Gradl-Dietsch, G and Seitz, J and Skoda, EM and Libuda, Lars
and Schweda, A and et al.}, year={2025}, pages={87} }'
chicago: 'Knoll-Pientka, N, D Schils, K Pasternak, S Czarnetzky, C Jansen, G Gradl-Dietsch,
J Seitz, et al. “Can Bioelectrical Impedance Analysis Be Used to Identify Water
Loading in Patients with Anorexia Nervosa?- Implications from Experimental Measurements
in Young, Healthy, and Normal Weight Women.” J Eat Disord 13, no. 1 (2025):
87.'
ieee: N. Knoll-Pientka et al., “Can bioelectrical impedance analysis be used
to identify water loading in patients with anorexia nervosa?- Implications from
experimental measurements in young, healthy, and normal weight women.,” J Eat
Disord, vol. 13, no. 1, p. 87, 2025.
mla: Knoll-Pientka, N., et al. “Can Bioelectrical Impedance Analysis Be Used to
Identify Water Loading in Patients with Anorexia Nervosa?- Implications from Experimental
Measurements in Young, Healthy, and Normal Weight Women.” J Eat Disord,
vol. 13, no. 1, 2025, p. 87.
short: N. Knoll-Pientka, D. Schils, K. Pasternak, S. Czarnetzky, C. Jansen, G. Gradl-Dietsch,
J. Seitz, E. Skoda, L. Libuda, A. Schweda, M. Teufel, J Eat Disord 13 (2025) 87.
date_created: 2025-06-30T10:24:32Z
date_updated: 2025-06-30T10:26:06Z
department:
- _id: '35'
- _id: '17'
- _id: '22'
external_id:
pmid:
- '40390023'
intvolume: ' 13'
issue: '1'
language:
- iso: eng
page: '87'
pmid: '1'
publication: J Eat Disord
publication_identifier:
issn:
- 2050-2974
status: public
title: Can bioelectrical impedance analysis be used to identify water loading in patients
with anorexia nervosa?- Implications from experimental measurements in young, healthy,
and normal weight women.
type: journal_article
user_id: '88682'
volume: 13
year: '2025'
...
---
_id: '60494'
abstract:
- lang: eng
text: Pillow-plate heat exchangers (PPHEs) represent a viable alternative to conventional
shell-and-tube and plate heat exchangers. The waviness of their channels intensifies
fluid mixing in the boundary layers and facilitates heat transfer. Applying secondary
surface structuring can further enhance the overall thermo-hydraulic performance
of PPHEs, thus increasing their competitiveness against conventional heat exchangers.
In this work, streamlined secondary structures applied on the PPHE surface were
studied numerically to explore their potential in enhancing near-wall fluid mixing.
Computational fluid dynamics (CFD) simulations of single-phase turbulent flow
in the inner PPHE channel were performed and pressure drop, heat transfer coefficients,
and overall thermo-hydraulic efficiency were determined. The simulation results
clearly demonstrate a favourable influence of secondary structuring on the heat
transfer performance of PPHEs.
author:
- first_name: Reza
full_name: Afsahnoudeh, Reza
id: '90390'
last_name: Afsahnoudeh
orcid: https://orcid.org/0009-0001-3161-8036
- first_name: Julia
full_name: Riese, Julia
id: '101499'
last_name: Riese
orcid: 0000-0002-3053-0534
- first_name: Eugeny Y.
full_name: Kenig, Eugeny Y.
last_name: Kenig
citation:
ama: 'Afsahnoudeh R, Riese J, Kenig EY. Thermo-Hydraulic Performance of Pillow-Plate
Heat Exchangers with Streamlined Secondary Structures: A Numerical Analysis. In:
Systems and Control Transactions. Vol 4. PSE Press; 2025. doi:10.69997/sct.178665'
apa: 'Afsahnoudeh, R., Riese, J., & Kenig, E. Y. (2025). Thermo-Hydraulic Performance
of Pillow-Plate Heat Exchangers with Streamlined Secondary Structures: A Numerical
Analysis. Systems and Control Transactions, 4. https://doi.org/10.69997/sct.178665'
bibtex: '@inproceedings{Afsahnoudeh_Riese_Kenig_2025, title={Thermo-Hydraulic Performance
of Pillow-Plate Heat Exchangers with Streamlined Secondary Structures: A Numerical
Analysis}, volume={4}, DOI={10.69997/sct.178665},
booktitle={Systems and Control Transactions}, publisher={PSE Press}, author={Afsahnoudeh,
Reza and Riese, Julia and Kenig, Eugeny Y.}, year={2025} }'
chicago: 'Afsahnoudeh, Reza, Julia Riese, and Eugeny Y. Kenig. “Thermo-Hydraulic
Performance of Pillow-Plate Heat Exchangers with Streamlined Secondary Structures:
A Numerical Analysis.” In Systems and Control Transactions, Vol. 4. PSE
Press, 2025. https://doi.org/10.69997/sct.178665.'
ieee: 'R. Afsahnoudeh, J. Riese, and E. Y. Kenig, “Thermo-Hydraulic Performance
of Pillow-Plate Heat Exchangers with Streamlined Secondary Structures: A Numerical
Analysis,” in Systems and Control Transactions, 2025, vol. 4, doi: 10.69997/sct.178665.'
mla: 'Afsahnoudeh, Reza, et al. “Thermo-Hydraulic Performance of Pillow-Plate Heat
Exchangers with Streamlined Secondary Structures: A Numerical Analysis.” Systems
and Control Transactions, vol. 4, PSE Press, 2025, doi:10.69997/sct.178665.'
short: 'R. Afsahnoudeh, J. Riese, E.Y. Kenig, in: Systems and Control Transactions,
PSE Press, 2025.'
date_created: 2025-07-02T07:56:12Z
date_updated: 2025-07-02T07:57:08Z
department:
- _id: '831'
doi: 10.69997/sct.178665
intvolume: ' 4'
language:
- iso: eng
project:
- _id: '52'
name: 'PC2: Computing Resources Provided by the Paderborn Center for Parallel Computing'
publication: Systems and Control Transactions
publication_identifier:
issn:
- 2818-4734
publication_status: published
publisher: PSE Press
quality_controlled: '1'
status: public
title: 'Thermo-Hydraulic Performance of Pillow-Plate Heat Exchangers with Streamlined
Secondary Structures: A Numerical Analysis'
type: conference
user_id: '101499'
volume: 4
year: '2025'
...