---
_id: '5914'
abstract:
- lang: eng
text: During the last years, alternative drive technologies, for example electrically
powered vehicles (EV), have gained more and more attention, mainly caused by an
increasing awareness of the impact of CO2 emissions on climate change and by the
limitation of fossil fuels. However, these technologies currently come with new
challenges due to limited lithium ion battery storage density and high battery
costs which lead to a considerably reduced range in comparison to conventional
internal combustion engine powered vehicles. For this reason, it is desirable
to increase the vehicle range without enlarging the battery. When the route and
the road slope are known in advance, it is possible to vary the vehicles velocity
within certain limits in order to reduce the overall drivetrain energy consumption.
This may either result in an increased range or, alternatively, in larger energy
reserves for comfort functions such as air conditioning. In this presentation,
we formulate the challenge of range extension as a multiobjective optimal control
problem. We then apply different numerical methods to calculate the so-called
Pareto set of optimal compromises for the drivetrain power profile with respect
to the two concurrent objectives battery state of charge and mean velocity. In
order to numerically solve the optimal control problem by means of a direct method,
a time discretization of the drivetrain power profile is necessary. In combination
with a vehicle dynamics simulation model, the optimal control problem is transformed
into a high dimensional nonlinear optimization problem. For the approximation
of the Pareto set, two different optimization algorithms implemented in the software
package GAIO are used. The first one yields a global optimal solution by applying
a set-oriented subdivision technique to parameter space. By construction, this
technique is limited to coarse discretizations of the drivetrain power profile.
In contrast, the second technique, which is based on an image space continuation
method, is more suitable when the number of parameters is large while the number
of objectives is less than five. We compare the solutions of the two algorithms
and study the influence of different discretizations on the quality of the solutions.
A MATLAB/Simulink model is used to describe the dynamics of an EV. It is based
on a drivetrain efficiency map and considers vehicle properties such as rolling
friction and air drag, as well as environmental conditions like slope and ambient
temperature. The vehicle model takes into account the traction battery too, enabling
an exact prediction of the batterys response to power requests of drivetrain and
auxiliary loads, including state of charge.
author:
- first_name: Michael
full_name: Dellnitz, Michael
last_name: Dellnitz
- first_name: Julian
full_name: Eckstein, Julian
last_name: Eckstein
- first_name: Kathrin
full_name: Flaßkamp, Kathrin
last_name: Flaßkamp
- first_name: Patrick
full_name: Friedel, Patrick
last_name: Friedel
- first_name: Christian
full_name: Horenkamp, Christian
last_name: Horenkamp
- first_name: Ulrich
full_name: Köhler, Ulrich
last_name: Köhler
- first_name: Sina
full_name: Ober-Blöbaum, Sina
id: '16494'
last_name: Ober-Blöbaum
- first_name: Sebastian
full_name: Peitz, Sebastian
id: '47427'
last_name: Peitz
orcid: https://orcid.org/0000-0002-3389-793X
- first_name: Sebastian
full_name: Tiemeyer, Sebastian
last_name: Tiemeyer
citation:
ama: 'Dellnitz M, Eckstein J, Flaßkamp K, et al. Multiobjective Optimal Control
Methods for the Development of an Intelligent Cruise Control. In: Progress
in Industrial Mathematics at ECMI 2014 . Cham: Springer International Publishing;
2017:633-641. doi:10.1007/978-3-319-23413-7_87'
apa: 'Dellnitz, M., Eckstein, J., Flaßkamp, K., Friedel, P., Horenkamp, C., Köhler,
U., … Tiemeyer, S. (2017). Multiobjective Optimal Control Methods for the Development
of an Intelligent Cruise Control. In Progress in Industrial Mathematics at
ECMI 2014 (pp. 633–641). Cham: Springer International Publishing. https://doi.org/10.1007/978-3-319-23413-7_87'
bibtex: '@inproceedings{Dellnitz_Eckstein_Flaßkamp_Friedel_Horenkamp_Köhler_Ober-Blöbaum_Peitz_Tiemeyer_2017,
place={Cham}, title={Multiobjective Optimal Control Methods for the Development
of an Intelligent Cruise Control}, DOI={10.1007/978-3-319-23413-7_87},
booktitle={Progress in Industrial Mathematics at ECMI 2014 }, publisher={Springer
International Publishing}, author={Dellnitz, Michael and Eckstein, Julian and
Flaßkamp, Kathrin and Friedel, Patrick and Horenkamp, Christian and Köhler, Ulrich
and Ober-Blöbaum, Sina and Peitz, Sebastian and Tiemeyer, Sebastian}, year={2017},
pages={633–641} }'
chicago: 'Dellnitz, Michael, Julian Eckstein, Kathrin Flaßkamp, Patrick Friedel,
Christian Horenkamp, Ulrich Köhler, Sina Ober-Blöbaum, Sebastian Peitz, and Sebastian
Tiemeyer. “Multiobjective Optimal Control Methods for the Development of an Intelligent
Cruise Control.” In Progress in Industrial Mathematics at ECMI 2014 , 633–41.
Cham: Springer International Publishing, 2017. https://doi.org/10.1007/978-3-319-23413-7_87.'
ieee: M. Dellnitz et al., “Multiobjective Optimal Control Methods for the
Development of an Intelligent Cruise Control,” in Progress in Industrial Mathematics
at ECMI 2014 , 2017, pp. 633–641.
mla: Dellnitz, Michael, et al. “Multiobjective Optimal Control Methods for the Development
of an Intelligent Cruise Control.” Progress in Industrial Mathematics at ECMI
2014 , Springer International Publishing, 2017, pp. 633–41, doi:10.1007/978-3-319-23413-7_87.
short: 'M. Dellnitz, J. Eckstein, K. Flaßkamp, P. Friedel, C. Horenkamp, U. Köhler,
S. Ober-Blöbaum, S. Peitz, S. Tiemeyer, in: Progress in Industrial Mathematics
at ECMI 2014 , Springer International Publishing, Cham, 2017, pp. 633–641.'
date_created: 2018-11-27T14:46:52Z
date_updated: 2022-01-06T07:02:47Z
doi: 10.1007/978-3-319-23413-7_87
language:
- iso: eng
page: 633-641
place: Cham
project:
- _id: '52'
name: Computing Resources Provided by the Paderborn Center for Parallel Computing
publication: 'Progress in Industrial Mathematics at ECMI 2014 '
publication_identifier:
isbn:
- '9783319234120'
- '9783319234137'
issn:
- 1612-3956
- 2198-3283
publication_status: published
publisher: Springer International Publishing
status: public
title: Multiobjective Optimal Control Methods for the Development of an Intelligent
Cruise Control
type: conference
user_id: '47427'
year: '2017'
...
---
_id: '983'
author:
- first_name: Sébastien
full_name: Auroux, Sébastien
id: '42575'
last_name: Auroux
- first_name: S.
full_name: Scholz, S.
last_name: Scholz
- first_name: Holger
full_name: Karl, Holger
id: '126'
last_name: Karl
citation:
ama: 'Auroux S, Scholz S, Karl H. Assessing Genetic Algorithms for Placing Flow
Processing-aware Control Applications. In: Proc. European Wireless. ; 2017.'
apa: Auroux, S., Scholz, S., & Karl, H. (2017). Assessing Genetic Algorithms
for Placing Flow Processing-aware Control Applications. In Proc. European Wireless.
bibtex: '@inproceedings{Auroux_Scholz_Karl_2017, title={Assessing Genetic Algorithms
for Placing Flow Processing-aware Control Applications}, booktitle={Proc. European
Wireless}, author={Auroux, Sébastien and Scholz, S. and Karl, Holger}, year={2017}
}'
chicago: Auroux, Sébastien, S. Scholz, and Holger Karl. “Assessing Genetic Algorithms
for Placing Flow Processing-Aware Control Applications.” In Proc. European
Wireless, 2017.
ieee: S. Auroux, S. Scholz, and H. Karl, “Assessing Genetic Algorithms for Placing
Flow Processing-aware Control Applications,” in Proc. European Wireless,
2017.
mla: Auroux, Sébastien, et al. “Assessing Genetic Algorithms for Placing Flow Processing-Aware
Control Applications.” Proc. European Wireless, 2017.
short: 'S. Auroux, S. Scholz, H. Karl, in: Proc. European Wireless, 2017.'
date_created: 2017-11-27T10:22:29Z
date_updated: 2019-01-03T13:18:55Z
ddc:
- '004'
department:
- _id: '75'
ec_funded: '1'
main_file_link:
- url: http://ieeexplore.ieee.org/document/8011315/
project:
- _id: '22'
call_identifier: FP7-ICT-2011-C
grant_number: '318115'
name: Connectivity management for eneRgy Optimised Wireless Dense works
publication: Proc. European Wireless
status: public
title: Assessing Genetic Algorithms for Placing Flow Processing-aware Control Applications
type: conference
user_id: '126'
year: '2017'
...
---
_id: '9862'
abstract:
- lang: eng
text: 'In order to improve the credibility of modern simulation tools, uncertainties
of different kinds have to be considered. This work is focused on epistemic uncertainties
in the framework of continuum mechanics, which are taken into account by fuzzy
analysis. The underlying min-max optimization problem of the extension principle
is approximated by α-discretization, resulting in a separation of minimum and
maximum problems. To become more universal, so-called quantities of interest are
employed, which allow a general formulation for the target problem of interest.
In this way, the relation to parameter identification problems based on least-squares
functions is highlighted. The solutions of the related optimization problems with
simple constraints are obtained with a gradient-based scheme, which is derived
from a sensitvity analysis for the target problem by means of a variational formulation.
Two numerical examples for the fuzzy analysis of material parameters are concerned
with a necking problem at large strain elastoplasticity and a perforated strip
at large strain hyperelasticity to demonstrate the versatility of the proposed
variational formulation. '
author:
- first_name: Rolf
full_name: Mahnken, Rolf
last_name: Mahnken
citation:
ama: Mahnken R. “A variational formulation for fuzzy analysis in continuum mechanics.”
Mathematics and Mechanics of complex systems. 2017;5(3-4).
apa: Mahnken, R. (2017). “A variational formulation for fuzzy analysis in continuum
mechanics.” Mathematics and Mechanics of Complex Systems, 5(3–4).
bibtex: '@article{Mahnken_2017, title={“A variational formulation for fuzzy analysis
in continuum mechanics”}, volume={5}, number={3–4}, journal={Mathematics and Mechanics
of complex systems}, author={Mahnken, Rolf}, year={2017} }'
chicago: Mahnken, Rolf. “‘A Variational Formulation for Fuzzy Analysis in Continuum
Mechanics.’” Mathematics and Mechanics of Complex Systems 5, no. 3–4 (2017).
ieee: R. Mahnken, “‘A variational formulation for fuzzy analysis in continuum mechanics,’”
Mathematics and Mechanics of complex systems, vol. 5, no. 3–4, 2017.
mla: Mahnken, Rolf. “‘A Variational Formulation for Fuzzy Analysis in Continuum
Mechanics.’” Mathematics and Mechanics of Complex Systems, vol. 5, no.
3–4, 2017.
short: R. Mahnken, Mathematics and Mechanics of Complex Systems 5 (2017).
date_created: 2019-05-20T11:36:47Z
date_updated: 2019-05-27T12:54:35Z
department:
- _id: '154'
intvolume: ' 5'
issue: 3-4
keyword:
- fuzzy analysis
- α-level optimization
- quantities of interest
- optimization with simple constraints
- large strain elasticity
- large strain elastoplasticity
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://msp.org/memocs/2017/5-3/memocs-v5-n3-p03-s.pdf
oa: '1'
publication: Mathematics and Mechanics of complex systems
publication_identifier:
issn:
- ' 2325-3444'
publication_status: published
status: public
title: '"A variational formulation for fuzzy analysis in continuum mechanics"'
type: journal_article
user_id: '78813'
volume: 5
year: '2017'
...
---
_id: '9972'
abstract:
- lang: eng
text: The transportation of dry fine powders is an emerging technologic task, as
in biotechnology, pharmaceu-tical and coatings industry the particle sizes of
processed powders get smaller and smaller. Fine powdersare primarily defined by
the fact that adhesive and cohesive forces outweigh the weight forces, leadingto
mostly unwanted agglomeration (clumping) and adhesion to surfaces. Thereby it
gets more difficult touse conventional conveyor systems (e.g. pneumatic or vibratory
conveyors) for transport. A rather newmethod for transporting these fine powders
is based on ultrasonic vibrations, which are used to reducefriction between powder
and substrate. Within this contribution an experimental set-up consisting of apipe,
a solenoid actuator for axial vibration and an annular piezoelectric actuator
for the high frequencyradial vibration of the pipe is described. Since amplitudes
of the radial pipe vibration should be as large aspossible to get high effects
of friction reduction, the pipe is excited to vibrate in resonance. To determinethe
optimum excitation frequency and actuator position the vibration modes and resonance
frequenciesof the pipe are calculated and measured. Results are in good accordance.
author:
- first_name: Paul
full_name: Dunst, Paul
id: '22130'
last_name: Dunst
- first_name: Tobias
full_name: Hemsel, Tobias
id: '210'
last_name: Hemsel
- first_name: Walter
full_name: Sextro, Walter
id: '21220'
last_name: Sextro
citation:
ama: Dunst P, Hemsel T, Sextro W. Analysis of pipe vibration in an ultrasonic powder
transportationsystem. elsevier. 2017;Sensors and Actuators A 263:733-736.
apa: Dunst, P., Hemsel, T., & Sextro, W. (2017). Analysis of pipe vibration
in an ultrasonic powder transportationsystem. Elsevier, Sensors and
Actuators A 263, 733–736.
bibtex: '@article{Dunst_Hemsel_Sextro_2017, title={Analysis of pipe vibration in
an ultrasonic powder transportationsystem}, volume={Sensors and Actuators A 263},
journal={elsevier}, author={Dunst, Paul and Hemsel, Tobias and Sextro, Walter},
year={2017}, pages={733–736} }'
chicago: 'Dunst, Paul, Tobias Hemsel, and Walter Sextro. “Analysis of Pipe Vibration
in an Ultrasonic Powder Transportationsystem.” Elsevier Sensors and Actuators
A 263 (2017): 733–36.'
ieee: P. Dunst, T. Hemsel, and W. Sextro, “Analysis of pipe vibration in an ultrasonic
powder transportationsystem,” elsevier, vol. Sensors and Actuators A 263,
pp. 733–736, 2017.
mla: Dunst, Paul, et al. “Analysis of Pipe Vibration in an Ultrasonic Powder Transportationsystem.”
Elsevier, vol. Sensors and Actuators A 263, 2017, pp. 733–36.
short: P. Dunst, T. Hemsel, W. Sextro, Elsevier Sensors and Actuators A 263 (2017)
733–736.
date_created: 2019-05-27T09:31:13Z
date_updated: 2019-09-16T10:23:40Z
department:
- _id: '151'
keyword:
- Powder transport Piezoelectrics Ultrasonics Pipe vibration Finite element simulation
Fine powder
language:
- iso: eng
page: 733-736
publication: elsevier
quality_controlled: '1'
status: public
title: Analysis of pipe vibration in an ultrasonic powder transportationsystem
type: journal_article
user_id: '55222'
volume: Sensors and Actuators A 263
year: '2017'
...
---
_id: '9975'
abstract:
- lang: eng
text: Piezoelectric inertia motors also known as stick-slip motors or (smooth) impact
drives use the inertia of a body to drive it in small steps by means of an uninterrupted
friction contact. In addition to the typical advantages of piezoelectric motors,
they are especially suited for miniaturisation due to their simple structure and
inherent fine-positioning capability. Originally developed for positioning in
microscopy in the 1980s, they have nowadays also found application in mass-produced
consumer goods. Recent research results are likely to enable more applications
of piezoelectric inertia motors in the future. This contribution gives a critical
overview of their historical development, functional principles, and related terminology.
The most relevant aspects regarding their design i.e., friction contact, solid
state actuator, and electrical excitation are discussed, including aspects of
control and simulation. The article closes with an outlook on possible future
developments and research perspectives.
author:
- first_name: Matthias
full_name: Hunstig, Matthias
last_name: Hunstig
citation:
ama: Hunstig M. Piezoelectric Inertia Motors—A Critical Review of History, Concepts,
Design, Applications, and Perspectives. Actuators 2017, 6(1)-7. 2017:1-35.
doi:10.3390/act6010007
apa: Hunstig, M. (2017). Piezoelectric Inertia Motors—A Critical Review of History,
Concepts, Design, Applications, and Perspectives. Actuators. 2017, 6(1)-7.,
1–35. https://doi.org/10.3390/act6010007
bibtex: '@article{Hunstig_2017, title={Piezoelectric Inertia Motors—A Critical Review
of History, Concepts, Design, Applications, and Perspectives.}, DOI={10.3390/act6010007},
journal={Actuators. 2017, 6(1)-7.}, author={Hunstig, Matthias}, year={2017}, pages={1–35}
}'
chicago: Hunstig, Matthias. “Piezoelectric Inertia Motors—A Critical Review of History,
Concepts, Design, Applications, and Perspectives.” Actuators. 2017, 6(1)-7.,
2017, 1–35. https://doi.org/10.3390/act6010007.
ieee: M. Hunstig, “Piezoelectric Inertia Motors—A Critical Review of History, Concepts,
Design, Applications, and Perspectives.,” Actuators. 2017, 6(1)-7., pp.
1–35, 2017.
mla: Hunstig, Matthias. “Piezoelectric Inertia Motors—A Critical Review of History,
Concepts, Design, Applications, and Perspectives.” Actuators. 2017, 6(1)-7.,
2017, pp. 1–35, doi:10.3390/act6010007.
short: M. Hunstig, Actuators. 2017, 6(1)-7. (2017) 1–35.
date_created: 2019-05-27T09:36:55Z
date_updated: 2019-09-16T09:57:39Z
department:
- _id: '151'
doi: 10.3390/act6010007
language:
- iso: eng
page: 1-35
publication: Actuators. 2017, 6(1)-7.
quality_controlled: '1'
status: public
title: Piezoelectric Inertia Motors—A Critical Review of History, Concepts, Design,
Applications, and Perspectives.
type: journal_article
user_id: '55222'
year: '2017'
...
---
_id: '5199'
abstract:
- lang: eng
text: 'This study proposes a simple theoretical framework that allows for assessing
financial distress up to five years in advance. We jointly model financial distress
by using two of its key driving factors: declining cash-generating ability and
insufficient liquidity reserves. The model is based on stochastic processes and
incorporates firm-level and industry-sector developments. A large-scale empirical
implementation for US-listed firms over the period of 1980-2010 shows important
improvements in the discriminatory accuracy and demonstrates incremental information
content beyond state-of-the-art accounting and market-based prediction models.
Consequently, this study might provide important ex ante warning signals for investors,
regulators and practitioners. '
author:
- first_name: Jan
full_name: Klobucnik, Jan
last_name: Klobucnik
- first_name: David
full_name: Miersch, David
last_name: Miersch
- first_name: Sönke
full_name: Sievers, Sönke
last_name: Sievers
citation:
ama: 'Klobucnik J, Miersch D, Sievers S. Predicting Early Warning Signals of Financial
Distress: Theory and Empirical Evidence. SSRN Electronic Journal. 2017.'
apa: 'Klobucnik, J., Miersch, D., & Sievers, S. (2017). Predicting Early Warning
Signals of Financial Distress: Theory and Empirical Evidence. SSRN Electronic
Journal.'
bibtex: '@article{Klobucnik_Miersch_Sievers_2017, title={Predicting Early Warning
Signals of Financial Distress: Theory and Empirical Evidence}, journal={SSRN Electronic
Journal}, author={Klobucnik, Jan and Miersch, David and Sievers, Sönke}, year={2017}
}'
chicago: 'Klobucnik, Jan, David Miersch, and Sönke Sievers. “Predicting Early Warning
Signals of Financial Distress: Theory and Empirical Evidence.” SSRN Electronic
Journal, 2017.'
ieee: 'J. Klobucnik, D. Miersch, and S. Sievers, “Predicting Early Warning Signals
of Financial Distress: Theory and Empirical Evidence,” SSRN Electronic Journal,
2017.'
mla: 'Klobucnik, Jan, et al. “Predicting Early Warning Signals of Financial Distress:
Theory and Empirical Evidence.” SSRN Electronic Journal, 2017.'
short: J. Klobucnik, D. Miersch, S. Sievers, SSRN Electronic Journal (2017).
date_created: 2018-10-31T12:19:42Z
date_updated: 2022-01-06T07:01:43Z
department:
- _id: '275'
jel:
- C63
- C52
- C53
- G33
- M41
keyword:
- Financial distress prediction
- probability of default
- accounting information
- stochastic processes
- simulation
language:
- iso: eng
publication: SSRN Electronic Journal
publication_status: published
status: public
title: 'Predicting Early Warning Signals of Financial Distress: Theory and Empirical
Evidence'
type: journal_article
user_id: '64756'
year: '2017'
...
---
_id: '6565'
author:
- first_name: Axel
full_name: Jäger, Axel
last_name: Jäger
- first_name: Sarah
full_name: Johannesmann, Sarah
id: '29190'
last_name: Johannesmann
- first_name: Leander
full_name: Claes, Leander
id: '11829'
last_name: Claes
orcid: 0000-0002-4393-268X
- first_name: Manuel
full_name: Webersen, Manuel
id: '11289'
last_name: Webersen
orcid: 0000-0001-6411-4232
- first_name: Bernd
full_name: Henning, Bernd
id: '213'
last_name: Henning
- first_name: Mario
full_name: Kupnik, Mario
last_name: Kupnik
citation:
ama: 'Jäger A, Johannesmann S, Claes L, Webersen M, Henning B, Kupnik M. Evaluating
the Influence of 3D-Printing Parameters on Acoustic Material Properties. In: 2017
IEEE IUS~Proceedings. ; 2017.'
apa: Jäger, A., Johannesmann, S., Claes, L., Webersen, M., Henning, B., & Kupnik,
M. (2017). Evaluating the Influence of 3D-Printing Parameters on Acoustic Material
Properties. In 2017 IEEE IUS~Proceedings.
bibtex: '@inproceedings{Jäger_Johannesmann_Claes_Webersen_Henning_Kupnik_2017, title={Evaluating
the Influence of 3D-Printing Parameters on Acoustic Material Properties}, booktitle={2017
IEEE IUS~Proceedings}, author={Jäger, Axel and Johannesmann, Sarah and Claes,
Leander and Webersen, Manuel and Henning, Bernd and Kupnik, Mario}, year={2017}
}'
chicago: Jäger, Axel, Sarah Johannesmann, Leander Claes, Manuel Webersen, Bernd
Henning, and Mario Kupnik. “Evaluating the Influence of 3D-Printing Parameters
on Acoustic Material Properties.” In 2017 IEEE IUS~Proceedings, 2017.
ieee: A. Jäger, S. Johannesmann, L. Claes, M. Webersen, B. Henning, and M. Kupnik,
“Evaluating the Influence of 3D-Printing Parameters on Acoustic Material Properties,”
in 2017 IEEE IUS~Proceedings, 2017.
mla: Jäger, Axel, et al. “Evaluating the Influence of 3D-Printing Parameters on
Acoustic Material Properties.” 2017 IEEE IUS~Proceedings, 2017.
short: 'A. Jäger, S. Johannesmann, L. Claes, M. Webersen, B. Henning, M. Kupnik,
in: 2017 IEEE IUS~Proceedings, 2017.'
date_created: 2019-01-09T14:37:13Z
date_updated: 2022-01-06T07:03:12Z
department:
- _id: '49'
language:
- iso: eng
publication: 2017 IEEE IUS~Proceedings
status: public
title: Evaluating the Influence of 3D-Printing Parameters on Acoustic Material Properties
type: conference
user_id: '11829'
year: '2017'
...
---
_id: '6638'
author:
- first_name: Stefan
full_name: Krauter, Stefan
id: '28836'
last_name: Krauter
orcid: 0000-0002-3594-260X
citation:
ama: 'Krauter S. Comparison of Conversion Efficiencies and Energy Yields of Micro-Inverters
for Photovoltaic Modules. In: VDE-Proceedings of NEIS 2017 – Conference on
Sustainable Energy Supply and Energy Storage Systems by IEEE-PES. Hamburg (Deutschland),
21.–22. September, 2017. Hamburg; 2017.'
apa: Krauter, S. (2017). Comparison of Conversion Efficiencies and Energy Yields
of Micro-Inverters for Photovoltaic Modules. In VDE-Proceedings of NEIS 2017
– Conference on Sustainable Energy Supply and Energy Storage Systems by IEEE-PES.
Hamburg (Deutschland), 21.–22. September, 2017. Hamburg.
bibtex: '@inproceedings{Krauter_2017, place={Hamburg}, title={Comparison of Conversion
Efficiencies and Energy Yields of Micro-Inverters for Photovoltaic Modules}, booktitle={VDE-Proceedings
of NEIS 2017 – Conference on Sustainable Energy Supply and Energy Storage Systems
by IEEE-PES. Hamburg (Deutschland), 21.–22. September, 2017.}, author={Krauter,
Stefan}, year={2017} }'
chicago: Krauter, Stefan. “Comparison of Conversion Efficiencies and Energy Yields
of Micro-Inverters for Photovoltaic Modules.” In VDE-Proceedings of NEIS 2017
– Conference on Sustainable Energy Supply and Energy Storage Systems by IEEE-PES.
Hamburg (Deutschland), 21.–22. September, 2017. Hamburg, 2017.
ieee: S. Krauter, “Comparison of Conversion Efficiencies and Energy Yields of Micro-Inverters
for Photovoltaic Modules,” in VDE-Proceedings of NEIS 2017 – Conference on
Sustainable Energy Supply and Energy Storage Systems by IEEE-PES. Hamburg (Deutschland),
21.–22. September, 2017., Hamburg, 2017.
mla: Krauter, Stefan. “Comparison of Conversion Efficiencies and Energy Yields of
Micro-Inverters for Photovoltaic Modules.” VDE-Proceedings of NEIS 2017 – Conference
on Sustainable Energy Supply and Energy Storage Systems by IEEE-PES. Hamburg (Deutschland),
21.–22. September, 2017., 2017.
short: 'S. Krauter, in: VDE-Proceedings of NEIS 2017 – Conference on Sustainable
Energy Supply and Energy Storage Systems by IEEE-PES. Hamburg (Deutschland), 21.–22.
September, 2017., Hamburg, 2017.'
conference:
end_date: 2017-11-22
location: Hamburg
name: NEIS 2017 – Conference on Sustainable Energy Supply and Energy Storage Systems
by IEEE-PES
start_date: 2017-11-21
date_created: 2019-01-14T08:40:37Z
date_updated: 2022-01-06T07:03:13Z
department:
- _id: '53'
language:
- iso: eng
place: Hamburg
publication: VDE-Proceedings of NEIS 2017 – Conference on Sustainable Energy Supply
and Energy Storage Systems by IEEE-PES. Hamburg (Deutschland), 21.–22. September,
2017.
status: public
title: Comparison of Conversion Efficiencies and Energy Yields of Micro-Inverters
for Photovoltaic Modules
type: conference
user_id: '16148'
year: '2017'
...
---
_id: '6639'
author:
- first_name: Stefan
full_name: Krauter, Stefan
id: '28836'
last_name: Krauter
orcid: 0000-0002-3594-260X
- first_name: Ali
full_name: Ameli, Ali
last_name: Ameli
citation:
ama: 'Krauter S, Ameli A. Smart Charging Management System of Plugged-in EVs for
Optimal Operation of Future Power Systems. In: VDE-Proceedings of NEIS 2017
– Conference on Sustainable Energy Supply and Energy Storage Systems by IEEE-PES.
Hamburg (Deutschland), 21.–22. September, 2017. Hamburg; 2017.'
apa: Krauter, S., & Ameli, A. (2017). Smart Charging Management System of Plugged-in
EVs for Optimal Operation of Future Power Systems. In VDE-Proceedings of NEIS
2017 – Conference on Sustainable Energy Supply and Energy Storage Systems by IEEE-PES.
Hamburg (Deutschland), 21.–22. September, 2017. Hamburg.
bibtex: '@inproceedings{Krauter_Ameli_2017, place={Hamburg}, title={Smart Charging
Management System of Plugged-in EVs for Optimal Operation of Future Power Systems.},
booktitle={VDE-Proceedings of NEIS 2017 – Conference on Sustainable Energy Supply
and Energy Storage Systems by IEEE-PES. Hamburg (Deutschland), 21.–22. September,
2017.}, author={Krauter, Stefan and Ameli, Ali}, year={2017} }'
chicago: Krauter, Stefan, and Ali Ameli. “Smart Charging Management System of Plugged-in
EVs for Optimal Operation of Future Power Systems.” In VDE-Proceedings of NEIS
2017 – Conference on Sustainable Energy Supply and Energy Storage Systems by IEEE-PES.
Hamburg (Deutschland), 21.–22. September, 2017. Hamburg, 2017.
ieee: S. Krauter and A. Ameli, “Smart Charging Management System of Plugged-in EVs
for Optimal Operation of Future Power Systems.,” in VDE-Proceedings of NEIS
2017 – Conference on Sustainable Energy Supply and Energy Storage Systems by IEEE-PES.
Hamburg (Deutschland), 21.–22. September, 2017., Hamburg, 2017.
mla: Krauter, Stefan, and Ali Ameli. “Smart Charging Management System of Plugged-in
EVs for Optimal Operation of Future Power Systems.” VDE-Proceedings of NEIS
2017 – Conference on Sustainable Energy Supply and Energy Storage Systems by IEEE-PES.
Hamburg (Deutschland), 21.–22. September, 2017., 2017.
short: 'S. Krauter, A. Ameli, in: VDE-Proceedings of NEIS 2017 – Conference on Sustainable
Energy Supply and Energy Storage Systems by IEEE-PES. Hamburg (Deutschland), 21.–22.
September, 2017., Hamburg, 2017.'
conference:
end_date: 2017-09-22
location: Hamburg
name: NEIS 2017 – Conference on Sustainable Energy Supply and Energy Storage Systems
by IEEE-PES
start_date: 2017-09-21
date_created: 2019-01-14T08:46:02Z
date_updated: 2022-01-06T07:03:13Z
department:
- _id: '53'
language:
- iso: eng
place: Hamburg
publication: VDE-Proceedings of NEIS 2017 – Conference on Sustainable Energy Supply
and Energy Storage Systems by IEEE-PES. Hamburg (Deutschland), 21.–22. September,
2017.
status: public
title: Smart Charging Management System of Plugged-in EVs for Optimal Operation of
Future Power Systems.
type: conference
user_id: '16148'
year: '2017'
...
---
_id: '12005'
author:
- first_name: David
full_name: Eckhoff, David
last_name: Eckhoff
- first_name: Alexander
full_name: Brummer, Alexander
last_name: Brummer
- first_name: Christoph
full_name: Sommer, Christoph
id: '49154'
last_name: Sommer
orcid: 0000-0002-4336-7350
citation:
ama: 'Eckhoff D, Brummer A, Sommer C. On the impact of antenna patterns on VANET
simulation. In: 2016 IEEE Vehicular Networking Conference (VNC). ; 2017.
doi:10.1109/vnc.2016.7835925'
apa: Eckhoff, D., Brummer, A., & Sommer, C. (2017). On the impact of antenna
patterns on VANET simulation. In 2016 IEEE Vehicular Networking Conference
(VNC). https://doi.org/10.1109/vnc.2016.7835925
bibtex: '@inproceedings{Eckhoff_Brummer_Sommer_2017, title={On the impact of antenna
patterns on VANET simulation}, DOI={10.1109/vnc.2016.7835925},
booktitle={2016 IEEE Vehicular Networking Conference (VNC)}, author={Eckhoff,
David and Brummer, Alexander and Sommer, Christoph}, year={2017} }'
chicago: Eckhoff, David, Alexander Brummer, and Christoph Sommer. “On the Impact
of Antenna Patterns on VANET Simulation.” In 2016 IEEE Vehicular Networking
Conference (VNC), 2017. https://doi.org/10.1109/vnc.2016.7835925.
ieee: D. Eckhoff, A. Brummer, and C. Sommer, “On the impact of antenna patterns
on VANET simulation,” in 2016 IEEE Vehicular Networking Conference (VNC),
2017.
mla: Eckhoff, David, et al. “On the Impact of Antenna Patterns on VANET Simulation.”
2016 IEEE Vehicular Networking Conference (VNC), 2017, doi:10.1109/vnc.2016.7835925.
short: 'D. Eckhoff, A. Brummer, C. Sommer, in: 2016 IEEE Vehicular Networking Conference
(VNC), 2017.'
date_created: 2019-07-18T09:52:50Z
date_updated: 2022-01-06T06:51:15Z
department:
- _id: '589'
doi: 10.1109/vnc.2016.7835925
language:
- iso: eng
publication: 2016 IEEE Vehicular Networking Conference (VNC)
publication_identifier:
isbn:
- '9781509051977'
publication_status: published
status: public
title: On the impact of antenna patterns on VANET simulation
type: conference
user_id: '49154'
year: '2017'
...
---
_id: '15942'
author:
- first_name: Corin
full_name: Reuter, Corin
last_name: Reuter
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: Reuter C, Tröster T. Crashworthiness and numerical simulation of hybrid aluminium-CFRP
tubes under axial impact. Thin-Walled Structures. 2017;117:1-9. doi:10.1016/j.tws.2017.03.034
apa: Reuter, C., & Tröster, T. (2017). Crashworthiness and numerical simulation
of hybrid aluminium-CFRP tubes under axial impact. Thin-Walled Structures,
117, 1–9. https://doi.org/10.1016/j.tws.2017.03.034
bibtex: '@article{Reuter_Tröster_2017, title={Crashworthiness and numerical simulation
of hybrid aluminium-CFRP tubes under axial impact}, volume={117}, DOI={10.1016/j.tws.2017.03.034},
journal={Thin-Walled Structures}, author={Reuter, Corin and Tröster, Thomas},
year={2017}, pages={1–9} }'
chicago: 'Reuter, Corin, and Thomas Tröster. “Crashworthiness and Numerical Simulation
of Hybrid Aluminium-CFRP Tubes under Axial Impact.” Thin-Walled Structures
117 (2017): 1–9. https://doi.org/10.1016/j.tws.2017.03.034.'
ieee: C. Reuter and T. Tröster, “Crashworthiness and numerical simulation of hybrid
aluminium-CFRP tubes under axial impact,” Thin-Walled Structures, vol.
117, pp. 1–9, 2017.
mla: Reuter, Corin, and Thomas Tröster. “Crashworthiness and Numerical Simulation
of Hybrid Aluminium-CFRP Tubes under Axial Impact.” Thin-Walled Structures,
vol. 117, 2017, pp. 1–9, doi:10.1016/j.tws.2017.03.034.
short: C. Reuter, T. Tröster, Thin-Walled Structures 117 (2017) 1–9.
date_created: 2020-02-20T13:33:08Z
date_updated: 2022-01-06T06:52:41Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
doi: 10.1016/j.tws.2017.03.034
intvolume: ' 117'
language:
- iso: eng
page: 1-9
project:
- _id: '52'
name: Computing Resources Provided by the Paderborn Center for Parallel Computing
publication: Thin-Walled Structures
publication_identifier:
issn:
- 0263-8231
publication_status: published
status: public
title: Crashworthiness and numerical simulation of hybrid aluminium-CFRP tubes under
axial impact
type: journal_article
user_id: '72008'
volume: 117
year: '2017'
...
---
_id: '16070'
author:
- first_name: 'Nathalie '
full_name: 'Weiß Borkowski, Nathalie '
last_name: Weiß Borkowski
citation:
ama: Weiß Borkowski N. Analyse des Verformungsverhaltens von Übergangszonen partiell
pressgehärteter Strukturen. Shaker Verlag Band 2017/22; 2017.
apa: Weiß Borkowski, N. (2017). Analyse des Verformungsverhaltens von Übergangszonen
partiell pressgehärteter Strukturen. Shaker Verlag Band 2017/22.
bibtex: '@book{Weiß Borkowski_2017, title={Analyse des Verformungsverhaltens von
Übergangszonen partiell pressgehärteter Strukturen}, publisher={Shaker Verlag
Band 2017/22}, author={Weiß Borkowski, Nathalie }, year={2017} }'
chicago: Weiß Borkowski, Nathalie . Analyse des Verformungsverhaltens von Übergangszonen
partiell pressgehärteter Strukturen. Shaker Verlag Band 2017/22, 2017.
ieee: N. Weiß Borkowski, Analyse des Verformungsverhaltens von Übergangszonen
partiell pressgehärteter Strukturen. Shaker Verlag Band 2017/22, 2017.
mla: Weiß Borkowski, Nathalie. Analyse des Verformungsverhaltens von Übergangszonen
partiell pressgehärteter Strukturen. Shaker Verlag Band 2017/22, 2017.
short: N. Weiß Borkowski, Analyse des Verformungsverhaltens von Übergangszonen partiell
pressgehärteter Strukturen, Shaker Verlag Band 2017/22, 2017.
date_created: 2020-02-25T10:24:55Z
date_updated: 2022-01-06T06:52:42Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: ger
publication_identifier:
isbn:
- 978-3-8440-5013-4
publisher: Shaker Verlag Band 2017/22
status: public
supervisor:
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
title: Analyse des Verformungsverhaltens von Übergangszonen partiell pressgehärteter
Strukturen
type: dissertation
user_id: '72008'
year: '2017'
...
---
_id: '16075'
author:
- first_name: Dominik
full_name: Ahlers, Dominik
id: '11207'
last_name: Ahlers
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: 'Ahlers D, Tröster T. Aspekte der Produktentwicklung in der additiven Fertigung.
In: ; 2017.'
apa: 'Ahlers, D., & Tröster, T. (2017). Aspekte der Produktentwicklung in der
additiven Fertigung. Presented at the Technikforum: Design, Konstruktion, 3D Druck:
Der Weg zum fertigen Bauteil, Nördlingen.'
bibtex: '@inproceedings{Ahlers_Tröster_2017, title={Aspekte der Produktentwicklung
in der additiven Fertigung}, author={Ahlers, Dominik and Tröster, Thomas}, year={2017}
}'
chicago: Ahlers, Dominik, and Thomas Tröster. “Aspekte der Produktentwicklung in
der additiven Fertigung,” 2017.
ieee: 'D. Ahlers and T. Tröster, “Aspekte der Produktentwicklung in der additiven
Fertigung,” presented at the Technikforum: Design, Konstruktion, 3D Druck: Der
Weg zum fertigen Bauteil, Nördlingen, 2017.'
mla: Ahlers, Dominik, and Thomas Tröster. Aspekte der Produktentwicklung in der
additiven Fertigung. 2017.
short: 'D. Ahlers, T. Tröster, in: 2017.'
conference:
location: Nördlingen
name: 'Technikforum: Design, Konstruktion, 3D Druck: Der Weg zum fertigen Bauteil'
start_date: 2017-07-04
date_created: 2020-02-25T10:55:13Z
date_updated: 2022-01-06T06:52:43Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
- _id: '219'
language:
- iso: ger
status: public
title: Aspekte der Produktentwicklung in der additiven Fertigung
type: conference
user_id: '11207'
year: '2017'
...
---
_id: '16338'
abstract:
- lang: eng
text: To detect errors or find potential for improvement during the CAD-supported
development of a complex technical system like modern industrial machines, the
system’s virtual prototype can be examined in virtual reality (VR) in the context
of virtual design reviews. Besides exploring the static shape of the examined
system, observing the machines’ mechanics (e.g., motor-driven mechanisms) and
transport routes for the material transport (e.g., via conveyor belts or chains,
or rail-based transport systems) can play an equally important role in such a
review. In practice it is often the case, that the relevant information about
transport routes, or kinematic properties is either not consequently modeled in
the CAD data or is lost during conversion processes. To significantly reduce the
manual effort and costs for creating animations of the machines complex behavior
with such limited input data for a design review, we present a set of algorithms
to automatically determine geometrical properties of machine parts based only
on their triangulated surfaces. The algorithms allow to detect the course of transport
systems, the orientation of objects in 3d space, rotation axes of cylindrical
objects and holes, the number of tooth of gears, as well as the tooth spacing
of toothed racks. We implemented the algorithms in the VR system PADrend and applied
them to animate virtual prototypes of real machines.
author:
- first_name: Sascha
full_name: Brandt, Sascha
id: '11648'
last_name: Brandt
orcid: https://orcid.org/0000-0003-3546-203X
- first_name: Matthias
full_name: Fischer, Matthias
id: '146'
last_name: Fischer
- first_name: Maria
full_name: Gerges, Maria
last_name: Gerges
- first_name: Claudius
full_name: Jähn, Claudius
last_name: Jähn
- first_name: Jan
full_name: Berssenbrügge, Jan
last_name: Berssenbrügge
citation:
ama: 'Brandt S, Fischer M, Gerges M, Jähn C, Berssenbrügge J. Automatic Derivation
of Geometric Properties of Components From 3D Polygon Models. In: Volume 1:
37th Computers and Information in Engineering Conference. Vol 1. ; 2017:91:1-91:10.
doi:10.1115/detc2017-67528'
apa: 'Brandt, S., Fischer, M., Gerges, M., Jähn, C., & Berssenbrügge, J. (2017).
Automatic Derivation of Geometric Properties of Components From 3D Polygon Models.
In Volume 1: 37th Computers and Information in Engineering Conference (Vol.
1, pp. 91:1-91:10). Cleveland, USA. https://doi.org/10.1115/detc2017-67528'
bibtex: '@inproceedings{Brandt_Fischer_Gerges_Jähn_Berssenbrügge_2017, title={Automatic
Derivation of Geometric Properties of Components From 3D Polygon Models}, volume={1},
DOI={10.1115/detc2017-67528},
booktitle={Volume 1: 37th Computers and Information in Engineering Conference},
author={Brandt, Sascha and Fischer, Matthias and Gerges, Maria and Jähn, Claudius
and Berssenbrügge, Jan}, year={2017}, pages={91:1-91:10} }'
chicago: 'Brandt, Sascha, Matthias Fischer, Maria Gerges, Claudius Jähn, and Jan
Berssenbrügge. “Automatic Derivation of Geometric Properties of Components From
3D Polygon Models.” In Volume 1: 37th Computers and Information in Engineering
Conference, 1:91:1-91:10, 2017. https://doi.org/10.1115/detc2017-67528.'
ieee: 'S. Brandt, M. Fischer, M. Gerges, C. Jähn, and J. Berssenbrügge, “Automatic
Derivation of Geometric Properties of Components From 3D Polygon Models,” in Volume
1: 37th Computers and Information in Engineering Conference, Cleveland, USA,
2017, vol. 1, pp. 91:1-91:10.'
mla: 'Brandt, Sascha, et al. “Automatic Derivation of Geometric Properties of Components
From 3D Polygon Models.” Volume 1: 37th Computers and Information in Engineering
Conference, vol. 1, 2017, pp. 91:1-91:10, doi:10.1115/detc2017-67528.'
short: 'S. Brandt, M. Fischer, M. Gerges, C. Jähn, J. Berssenbrügge, in: Volume
1: 37th Computers and Information in Engineering Conference, 2017, pp. 91:1-91:10.'
conference:
end_date: 2017-08-09
location: Cleveland, USA
name: 37th Computers and Information in Engineering Conference
start_date: 2017-08-06
date_created: 2020-03-24T08:36:05Z
date_updated: 2022-01-06T06:52:49Z
department:
- _id: '63'
doi: 10.1115/detc2017-67528
intvolume: ' 1'
language:
- iso: eng
page: 91:1-91:10
publication: 'Volume 1: 37th Computers and Information in Engineering Conference'
publication_identifier:
isbn:
- '9780791858110'
publication_status: published
status: public
title: Automatic Derivation of Geometric Properties of Components From 3D Polygon
Models
type: conference
user_id: '15415'
volume: 1
year: '2017'
...
---
_id: '16339'
abstract:
- lang: ger
text: In der CAD-unterstützten Entwicklung von technischen Systemen (Maschinen,
Anlagen etc.) werden virtuelle Prototypen im Rahmen eines virtuellen Design-Reviews
mit Hilfe eines VR-Systems gesamtheitlich betrachtet, um frühzeitig Fehler und
Verbesserungsbedarf zu erkennen. Ein wichtiger Untersuchungsgegenstand ist dabei
die Analyse von Transportwegen für den Materialtransport mittels Fließbändern,
Förderketten oder schienenbasierten Transportsystemen. Diese Transportwege werden
im VR-System animiert. Problematisch dabei ist, dass derartige Transportsysteme
im zugrundeliegenden CAD-Modell in der Praxis oft nicht modelliert und nur exemplarisch
angedeutet werden, da diese für die Konstruktion nicht relevant sind (z.B. der
Fördergurt eines Förderbandes, oder die Kette einer Förderkette), oder die Informationen
über den Verlauf bei der Konvertierung der Daten in das VR-System verloren gehen.
Bei der Animation dieser Transportsysteme in einem VR-System muss der Transportweg
also aufwändig, manuell nachgearbeitet werden. Das Ziel dieser Arbeit ist die
Reduzierung des notwendigen manuellen Nachbearbeitungsaufwandes für das Design-Review
durch eine automatische Berechnung der Animationspfade entlang eines Transportsystems.
Es wird ein Algorithmus vorgestellt, der es ermöglicht mit nur geringem zeitlichem
Benutzeraufwand den Animationspfad aus den reinen polygonalen dreidimensionalen
Daten eines Transportsystems automatisch zu rekonstruieren.
author:
- first_name: Sascha
full_name: Brandt, Sascha
id: '11648'
last_name: Brandt
orcid: https://orcid.org/0000-0003-3546-203X
- first_name: Matthias
full_name: Fischer, Matthias
id: '146'
last_name: Fischer
citation:
ama: 'Brandt S, Fischer M. Automatische Ableitung der Transportwege von Transportsystemen
aus dem 3D-Polygonmodell. In: Wissenschaftsforum Intelligente Technische Systeme
(WInTeSys) 2017. Vol 369. Paderborn: Verlagsschriftenreihe des Heinz Nixdorf
Instituts, Paderborn; 2017:415-427.'
apa: 'Brandt, S., & Fischer, M. (2017). Automatische Ableitung der Transportwege
von Transportsystemen aus dem 3D-Polygonmodell. In Wissenschaftsforum Intelligente
Technische Systeme (WInTeSys) 2017 (Vol. 369, pp. 415–427). Paderborn: Verlagsschriftenreihe
des Heinz Nixdorf Instituts, Paderborn.'
bibtex: '@inproceedings{Brandt_Fischer_2017, place={Paderborn}, title={Automatische
Ableitung der Transportwege von Transportsystemen aus dem 3D-Polygonmodell}, volume={369},
booktitle={Wissenschaftsforum Intelligente Technische Systeme (WInTeSys) 2017},
publisher={Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn}, author={Brandt,
Sascha and Fischer, Matthias}, year={2017}, pages={415–427} }'
chicago: 'Brandt, Sascha, and Matthias Fischer. “Automatische Ableitung der Transportwege
von Transportsystemen aus dem 3D-Polygonmodell.” In Wissenschaftsforum Intelligente
Technische Systeme (WInTeSys) 2017, 369:415–27. Paderborn: Verlagsschriftenreihe
des Heinz Nixdorf Instituts, Paderborn, 2017.'
ieee: S. Brandt and M. Fischer, “Automatische Ableitung der Transportwege von Transportsystemen
aus dem 3D-Polygonmodell,” in Wissenschaftsforum Intelligente Technische Systeme
(WInTeSys) 2017, Paderborn, 2017, vol. 369, pp. 415–427.
mla: Brandt, Sascha, and Matthias Fischer. “Automatische Ableitung der Transportwege
von Transportsystemen aus dem 3D-Polygonmodell.” Wissenschaftsforum Intelligente
Technische Systeme (WInTeSys) 2017, vol. 369, Verlagsschriftenreihe des Heinz
Nixdorf Instituts, Paderborn, 2017, pp. 415–27.
short: 'S. Brandt, M. Fischer, in: Wissenschaftsforum Intelligente Technische Systeme
(WInTeSys) 2017, Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn,
Paderborn, 2017, pp. 415–427.'
conference:
end_date: 2017-05-12
location: Paderborn
name: Wissenschaftsforum Intelligente Technische Systeme (WInTeSys) 2017
start_date: 2017-05-11
date_created: 2020-03-24T08:44:25Z
date_updated: 2022-01-06T06:52:49Z
department:
- _id: '63'
intvolume: ' 369'
language:
- iso: ger
page: 415-427
place: Paderborn
publication: Wissenschaftsforum Intelligente Technische Systeme (WInTeSys) 2017
publication_status: published
publisher: Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn
status: public
title: Automatische Ableitung der Transportwege von Transportsystemen aus dem 3D-Polygonmodell
type: conference
user_id: '11648'
volume: 369
year: '2017'
...
---
_id: '16382'
author:
- first_name: Florian
full_name: Klingler, Florian
last_name: Klingler
- first_name: Gurjashan Singh
full_name: Pannu, Gurjashan Singh
last_name: Pannu
- first_name: Christoph
full_name: Sommer, Christoph
last_name: Sommer
- first_name: Falko
full_name: Dressler, Falko
last_name: Dressler
citation:
ama: 'Klingler F, Pannu GS, Sommer C, Dressler F. Connecting Simulation and Real
World: IEEE 802.11p in the Loop. In: Proceedings of the 23rd Annual International
Conference on Mobile Computing and Networking - MobiCom ’17. ; 2017. doi:10.1145/3117811.3131265'
apa: 'Klingler, F., Pannu, G. S., Sommer, C., & Dressler, F. (2017). Connecting
Simulation and Real World: IEEE 802.11p in the Loop. In Proceedings of the
23rd Annual International Conference on Mobile Computing and Networking - MobiCom
’17. https://doi.org/10.1145/3117811.3131265'
bibtex: '@inproceedings{Klingler_Pannu_Sommer_Dressler_2017, title={Connecting Simulation
and Real World: IEEE 802.11p in the Loop}, DOI={10.1145/3117811.3131265},
booktitle={Proceedings of the 23rd Annual International Conference on Mobile Computing
and Networking - MobiCom ’17}, author={Klingler, Florian and Pannu, Gurjashan
Singh and Sommer, Christoph and Dressler, Falko}, year={2017} }'
chicago: 'Klingler, Florian, Gurjashan Singh Pannu, Christoph Sommer, and Falko
Dressler. “Connecting Simulation and Real World: IEEE 802.11p in the Loop.” In
Proceedings of the 23rd Annual International Conference on Mobile Computing
and Networking - MobiCom ’17, 2017. https://doi.org/10.1145/3117811.3131265.'
ieee: 'F. Klingler, G. S. Pannu, C. Sommer, and F. Dressler, “Connecting Simulation
and Real World: IEEE 802.11p in the Loop,” in Proceedings of the 23rd Annual
International Conference on Mobile Computing and Networking - MobiCom ’17,
2017.'
mla: 'Klingler, Florian, et al. “Connecting Simulation and Real World: IEEE 802.11p
in the Loop.” Proceedings of the 23rd Annual International Conference on Mobile
Computing and Networking - MobiCom ’17, 2017, doi:10.1145/3117811.3131265.'
short: 'F. Klingler, G.S. Pannu, C. Sommer, F. Dressler, in: Proceedings of the
23rd Annual International Conference on Mobile Computing and Networking - MobiCom
’17, 2017.'
date_created: 2020-04-02T15:40:16Z
date_updated: 2022-01-06T06:52:49Z
doi: 10.1145/3117811.3131265
language:
- iso: eng
publication: Proceedings of the 23rd Annual International Conference on Mobile Computing
and Networking - MobiCom '17
publication_identifier:
isbn:
- '9781450349161'
publication_status: published
status: public
title: 'Connecting Simulation and Real World: IEEE 802.11p in the Loop'
type: conference
user_id: '49153'
year: '2017'
...
---
_id: '13276'
author:
- first_name: Gábor
full_name: Rutkai, Gábor
last_name: Rutkai
- first_name: Andreas
full_name: Köster, Andreas
last_name: Köster
- first_name: Gabriela
full_name: Guevara-Carrion, Gabriela
last_name: Guevara-Carrion
- first_name: Tatjana
full_name: Janzen, Tatjana
last_name: Janzen
- first_name: Michael
full_name: Schappals, Michael
last_name: Schappals
- first_name: Colin W.
full_name: Glass, Colin W.
last_name: Glass
- first_name: Martin
full_name: Bernreuther, Martin
last_name: Bernreuther
- first_name: Amer
full_name: Wafai, Amer
last_name: Wafai
- first_name: Simon
full_name: Stephan, Simon
last_name: Stephan
- first_name: Maximilian
full_name: Kohns, Maximilian
last_name: Kohns
- first_name: Steffen
full_name: Reiser, Steffen
last_name: Reiser
- first_name: Stephan
full_name: Deublein, Stephan
last_name: Deublein
- first_name: Martin
full_name: Horsch, Martin
last_name: Horsch
- first_name: Hans
full_name: Hasse, Hans
last_name: Hasse
- first_name: Jadran
full_name: Vrabec, Jadran
last_name: Vrabec
citation:
ama: 'Rutkai G, Köster A, Guevara-Carrion G, et al. ms2: A Molecular Simulation
Tool for Thermodynamic Properties, Release 3.0. Computer Physics Communications.
2017;221:343-351. doi:10.1016/j.cpc.2017.07.025'
apa: 'Rutkai, G., Köster, A., Guevara-Carrion, G., Janzen, T., Schappals, M., Glass,
C. W., … Vrabec, J. (2017). ms2: A Molecular Simulation Tool for Thermodynamic
Properties, Release 3.0. Computer Physics Communications, 221, 343–351.
https://doi.org/10.1016/j.cpc.2017.07.025'
bibtex: '@article{Rutkai_Köster_Guevara-Carrion_Janzen_Schappals_Glass_Bernreuther_Wafai_Stephan_Kohns_et
al._2017, title={ms2: A Molecular Simulation Tool for Thermodynamic Properties,
Release 3.0}, volume={221}, DOI={10.1016/j.cpc.2017.07.025},
journal={Computer Physics Communications}, author={Rutkai, Gábor and Köster, Andreas
and Guevara-Carrion, Gabriela and Janzen, Tatjana and Schappals, Michael and Glass,
Colin W. and Bernreuther, Martin and Wafai, Amer and Stephan, Simon and Kohns,
Maximilian and et al.}, year={2017}, pages={343–351} }'
chicago: 'Rutkai, Gábor, Andreas Köster, Gabriela Guevara-Carrion, Tatjana Janzen,
Michael Schappals, Colin W. Glass, Martin Bernreuther, et al. “Ms2: A Molecular
Simulation Tool for Thermodynamic Properties, Release 3.0.” Computer Physics
Communications 221 (2017): 343–51. https://doi.org/10.1016/j.cpc.2017.07.025.'
ieee: 'G. Rutkai et al., “ms2: A Molecular Simulation Tool for Thermodynamic
Properties, Release 3.0,” Computer Physics Communications, vol. 221, pp.
343–351, 2017.'
mla: 'Rutkai, Gábor, et al. “Ms2: A Molecular Simulation Tool for Thermodynamic
Properties, Release 3.0.” Computer Physics Communications, vol. 221, 2017,
pp. 343–51, doi:10.1016/j.cpc.2017.07.025.'
short: G. Rutkai, A. Köster, G. Guevara-Carrion, T. Janzen, M. Schappals, C.W. Glass,
M. Bernreuther, A. Wafai, S. Stephan, M. Kohns, S. Reiser, S. Deublein, M. Horsch,
H. Hasse, J. Vrabec, Computer Physics Communications 221 (2017) 343–351.
date_created: 2019-09-18T08:50:35Z
date_updated: 2022-01-06T06:51:31Z
doi: 10.1016/j.cpc.2017.07.025
intvolume: ' 221'
language:
- iso: eng
page: 343-351
project:
- _id: '52'
name: Computing Resources Provided by the Paderborn Center for Parallel Computing
publication: Computer Physics Communications
publication_identifier:
issn:
- 0010-4655
publication_status: published
status: public
title: 'ms2: A Molecular Simulation Tool for Thermodynamic Properties, Release 3.0'
type: journal_article
user_id: '40778'
volume: 221
year: '2017'
...
---
_id: '13279'
author:
- first_name: Michael
full_name: Schappals, Michael
last_name: Schappals
- first_name: Andreas
full_name: Mecklenfeld, Andreas
last_name: Mecklenfeld
- first_name: Leif
full_name: Kröger, Leif
last_name: Kröger
- first_name: Vitalie
full_name: Botan, Vitalie
last_name: Botan
- first_name: Andreas
full_name: Köster, Andreas
last_name: Köster
- first_name: Simon
full_name: Stephan, Simon
last_name: Stephan
- first_name: Edder J.
full_name: García, Edder J.
last_name: García
- first_name: Gabor
full_name: Rutkai, Gabor
last_name: Rutkai
- first_name: Gabriele
full_name: Raabe, Gabriele
last_name: Raabe
- first_name: Peter
full_name: Klein, Peter
last_name: Klein
- first_name: Kai
full_name: Leonhard, Kai
last_name: Leonhard
- first_name: Colin W.
full_name: Glass, Colin W.
last_name: Glass
- first_name: Johannes
full_name: Lenhard, Johannes
last_name: Lenhard
- first_name: Jadran
full_name: Vrabec, Jadran
last_name: Vrabec
- first_name: Hans
full_name: Hasse, Hans
last_name: Hasse
citation:
ama: 'Schappals M, Mecklenfeld A, Kröger L, et al. Round Robin Study: Molecular
Simulation of Thermodynamic Properties from Models with Internal Degrees of Freedom.
Journal of Chemical Theory and Computation. 2017;13(9):4270-4280. doi:10.1021/acs.jctc.7b00489'
apa: 'Schappals, M., Mecklenfeld, A., Kröger, L., Botan, V., Köster, A., Stephan,
S., … Hasse, H. (2017). Round Robin Study: Molecular Simulation of Thermodynamic
Properties from Models with Internal Degrees of Freedom. Journal of Chemical
Theory and Computation, 13(9), 4270–4280. https://doi.org/10.1021/acs.jctc.7b00489'
bibtex: '@article{Schappals_Mecklenfeld_Kröger_Botan_Köster_Stephan_García_Rutkai_Raabe_Klein_et
al._2017, title={Round Robin Study: Molecular Simulation of Thermodynamic Properties
from Models with Internal Degrees of Freedom}, volume={13}, DOI={10.1021/acs.jctc.7b00489},
number={9}, journal={Journal of Chemical Theory and Computation}, author={Schappals,
Michael and Mecklenfeld, Andreas and Kröger, Leif and Botan, Vitalie and Köster,
Andreas and Stephan, Simon and García, Edder J. and Rutkai, Gabor and Raabe, Gabriele
and Klein, Peter and et al.}, year={2017}, pages={4270–4280} }'
chicago: 'Schappals, Michael, Andreas Mecklenfeld, Leif Kröger, Vitalie Botan, Andreas
Köster, Simon Stephan, Edder J. García, et al. “Round Robin Study: Molecular Simulation
of Thermodynamic Properties from Models with Internal Degrees of Freedom.” Journal
of Chemical Theory and Computation 13, no. 9 (2017): 4270–80. https://doi.org/10.1021/acs.jctc.7b00489.'
ieee: 'M. Schappals et al., “Round Robin Study: Molecular Simulation of Thermodynamic
Properties from Models with Internal Degrees of Freedom,” Journal of Chemical
Theory and Computation, vol. 13, no. 9, pp. 4270–4280, 2017.'
mla: 'Schappals, Michael, et al. “Round Robin Study: Molecular Simulation of Thermodynamic
Properties from Models with Internal Degrees of Freedom.” Journal of Chemical
Theory and Computation, vol. 13, no. 9, 2017, pp. 4270–80, doi:10.1021/acs.jctc.7b00489.'
short: M. Schappals, A. Mecklenfeld, L. Kröger, V. Botan, A. Köster, S. Stephan,
E.J. García, G. Rutkai, G. Raabe, P. Klein, K. Leonhard, C.W. Glass, J. Lenhard,
J. Vrabec, H. Hasse, Journal of Chemical Theory and Computation 13 (2017) 4270–4280.
date_created: 2019-09-18T08:56:52Z
date_updated: 2022-01-06T06:51:31Z
doi: 10.1021/acs.jctc.7b00489
intvolume: ' 13'
issue: '9'
language:
- iso: eng
page: 4270-4280
project:
- _id: '52'
name: Computing Resources Provided by the Paderborn Center for Parallel Computing
publication: Journal of Chemical Theory and Computation
status: public
title: 'Round Robin Study: Molecular Simulation of Thermodynamic Properties from Models
with Internal Degrees of Freedom'
type: journal_article
user_id: '40778'
volume: 13
year: '2017'
...
---
_id: '102'
author:
- first_name: Matthias
full_name: Becker, Matthias
last_name: Becker
citation:
ama: Becker M. Engineering Self-Adaptive Systems with Simulation-Based Performence
Prediction. Universität Paderborn; 2017. doi:10.17619/UNIPB/1-133
apa: Becker, M. (2017). Engineering Self-Adaptive Systems with Simulation-Based
Performence Prediction. Universität Paderborn. https://doi.org/10.17619/UNIPB/1-133
bibtex: '@book{Becker_2017, title={Engineering Self-Adaptive Systems with Simulation-Based
Performence Prediction}, DOI={10.17619/UNIPB/1-133},
publisher={Universität Paderborn}, author={Becker, Matthias}, year={2017} }'
chicago: Becker, Matthias. Engineering Self-Adaptive Systems with Simulation-Based
Performence Prediction. Universität Paderborn, 2017. https://doi.org/10.17619/UNIPB/1-133.
ieee: M. Becker, Engineering Self-Adaptive Systems with Simulation-Based Performence
Prediction. Universität Paderborn, 2017.
mla: Becker, Matthias. Engineering Self-Adaptive Systems with Simulation-Based
Performence Prediction. Universität Paderborn, 2017, doi:10.17619/UNIPB/1-133.
short: M. Becker, Engineering Self-Adaptive Systems with Simulation-Based Performence
Prediction, Universität Paderborn, 2017.
date_created: 2017-10-17T12:41:11Z
date_updated: 2022-01-06T06:50:31Z
department:
- _id: '76'
doi: 10.17619/UNIPB/1-133
project:
- _id: '1'
name: SFB 901
- _id: '11'
name: SFB 901 - Subprojekt B3
- _id: '3'
name: SFB 901 - Project Area B
publisher: Universität Paderborn
status: public
supervisor:
- first_name: Steffen
full_name: Becker, Steffen
last_name: Becker
title: Engineering Self-Adaptive Systems with Simulation-Based Performence Prediction
type: dissertation
user_id: '477'
year: '2017'
...
---
_id: '22038'
abstract:
- lang: eng
text: 'Micro Physiological Systems (MPS), also known as Multi-Organ-Chip, Organ-on-a-Chip,
or Body-on-a-Chip, are advanced microfluidic systems that allow the cultivation
of different types of cells and tissue in just one common circuit. Furthermore,
they thus can also adjust the interaction of these different tissues. Perspectival
MPS will replace animal testing. For fast and flexible manufacturing and marking
of MPS, a concept for a universal micromachining platform has been developed which
provides the following latest key technologies: laser micro cutting of polymer
foils, laser micro- and sub-micro-structuring of polymer foils, 3D printing of
polymer components as well as optical inspection and online process control. The
combination of different laser sources, processing optics, inspection systems,
and print heads on multiple axes allows the change and exactly positioning to
the workpiece during the process. Therewith, the realization of MPS including
3D printed components as well as direct laser interference patterned surfaces
for well-defined cell adhesion and product protection is possible. Additional
basic technologies for the generation of periodical line-like structures at polycarbonate
foils using special Direct Laser Interference Patterning (DLIP) optics as well
as for the 3D printing of fluid-tight cell culture reservoirs made of Acrylonitrile
Butadiene Styrene directly onto polycarbonate microfluidics were established.
A first prototype of the universal micromachining platform combining different
lasers with Direct Laser Writing and DLIP is shown. With this laser micro cutting
as well as laser micro-structuring of polycarbonate (PC) foils and therewith functionalization
for MPS application could be successfully demonstrated.'
author:
- first_name: Elmar
full_name: Moritzer, Elmar
id: '20531'
last_name: Moritzer
- first_name: André
full_name: Hirsch, André
id: '27599'
last_name: Hirsch
- first_name: K.
full_name: Günther, K.
last_name: Günther
- first_name: F.
full_name: Sonntag, F.
last_name: Sonntag
- first_name: U.
full_name: Klotzbach, U.
last_name: Klotzbach
- first_name: A.F.
full_name: Lasagni, A.F.
last_name: Lasagni
citation:
ama: Moritzer E, Hirsch A, Günther K, Sonntag F, Klotzbach U, Lasagni AF. Universal
Micromachining Platform and Basic Technologies for the Manufacture and Marking
of Microphysiological Systems. Micromachines. 2017;8(246). doi:10.3390/mi8080246
apa: Moritzer, E., Hirsch, A., Günther, K., Sonntag, F., Klotzbach, U., & Lasagni,
A. F. (2017). Universal Micromachining Platform and Basic Technologies for the
Manufacture and Marking of Microphysiological Systems. Micromachines, 8(246).
https://doi.org/10.3390/mi8080246
bibtex: '@article{Moritzer_Hirsch_Günther_Sonntag_Klotzbach_Lasagni_2017, title={Universal
Micromachining Platform and Basic Technologies for the Manufacture and Marking
of Microphysiological Systems}, volume={8}, DOI={10.3390/mi8080246},
number={246}, journal={Micromachines}, publisher={MDPI}, author={Moritzer, Elmar
and Hirsch, André and Günther, K. and Sonntag, F. and Klotzbach, U. and Lasagni,
A.F.}, year={2017} }'
chicago: Moritzer, Elmar, André Hirsch, K. Günther, F. Sonntag, U. Klotzbach, and
A.F. Lasagni. “Universal Micromachining Platform and Basic Technologies for the
Manufacture and Marking of Microphysiological Systems.” Micromachines 8,
no. 246 (2017). https://doi.org/10.3390/mi8080246.
ieee: 'E. Moritzer, A. Hirsch, K. Günther, F. Sonntag, U. Klotzbach, and A. F. Lasagni,
“Universal Micromachining Platform and Basic Technologies for the Manufacture
and Marking of Microphysiological Systems,” Micromachines, vol. 8, no.
246, 2017, doi: 10.3390/mi8080246.'
mla: Moritzer, Elmar, et al. “Universal Micromachining Platform and Basic Technologies
for the Manufacture and Marking of Microphysiological Systems.” Micromachines,
vol. 8, no. 246, MDPI, 2017, doi:10.3390/mi8080246.
short: E. Moritzer, A. Hirsch, K. Günther, F. Sonntag, U. Klotzbach, A.F. Lasagni,
Micromachines 8 (2017).
date_created: 2021-05-07T13:23:20Z
date_updated: 2022-04-25T08:02:49Z
department:
- _id: '219'
- _id: '624'
- _id: '367'
- _id: '321'
- _id: '9'
doi: 10.3390/mi8080246
intvolume: ' 8'
issue: '246'
language:
- iso: eng
publication: Micromachines
publisher: MDPI
quality_controlled: '1'
status: public
title: Universal Micromachining Platform and Basic Technologies for the Manufacture
and Marking of Microphysiological Systems
type: journal_article
user_id: '70729'
volume: 8
year: '2017'
...