[{"intvolume":"        34","author":[{"first_name":"Lorenz","full_name":"Butzhammer, Lorenz","last_name":"Butzhammer"},{"last_name":"Müller","first_name":"Andreas Michael","full_name":"Müller, Andreas Michael"},{"last_name":"Hausotte","full_name":"Hausotte, Tino","first_name":"Tino"}],"department":[{"_id":"630"}],"citation":{"mla":"Butzhammer, Lorenz, et al. “Calibration of 3D Scan Trajectories for an Industrial Computed Tomography Setup with 6-DOF Object Manipulator System Using a Single Sphere.” <i>Measurement Science and Technology</i>, vol. 34, no. 1, 015403, IOP Publishing, 2022, doi:<a href=\"https://doi.org/10.1088/1361-6501/ac9856\">10.1088/1361-6501/ac9856</a>.","bibtex":"@article{Butzhammer_Müller_Hausotte_2022, title={Calibration of 3D scan trajectories for an industrial computed tomography setup with 6-DOF object manipulator system using a single sphere}, volume={34}, DOI={<a href=\"https://doi.org/10.1088/1361-6501/ac9856\">10.1088/1361-6501/ac9856</a>}, number={1015403}, journal={Measurement Science and Technology}, publisher={IOP Publishing}, author={Butzhammer, Lorenz and Müller, Andreas Michael and Hausotte, Tino}, year={2022} }","short":"L. Butzhammer, A.M. Müller, T. Hausotte, Measurement Science and Technology 34 (2022).","apa":"Butzhammer, L., Müller, A. M., &#38; Hausotte, T. (2022). Calibration of 3D scan trajectories for an industrial computed tomography setup with 6-DOF object manipulator system using a single sphere. <i>Measurement Science and Technology</i>, <i>34</i>(1), Article 015403. <a href=\"https://doi.org/10.1088/1361-6501/ac9856\">https://doi.org/10.1088/1361-6501/ac9856</a>","ama":"Butzhammer L, Müller AM, Hausotte T. Calibration of 3D scan trajectories for an industrial computed tomography setup with 6-DOF object manipulator system using a single sphere. <i>Measurement Science and Technology</i>. 2022;34(1). doi:<a href=\"https://doi.org/10.1088/1361-6501/ac9856\">10.1088/1361-6501/ac9856</a>","chicago":"Butzhammer, Lorenz, Andreas Michael Müller, and Tino Hausotte. “Calibration of 3D Scan Trajectories for an Industrial Computed Tomography Setup with 6-DOF Object Manipulator System Using a Single Sphere.” <i>Measurement Science and Technology</i> 34, no. 1 (2022). <a href=\"https://doi.org/10.1088/1361-6501/ac9856\">https://doi.org/10.1088/1361-6501/ac9856</a>.","ieee":"L. Butzhammer, A. M. Müller, and T. Hausotte, “Calibration of 3D scan trajectories for an industrial computed tomography setup with 6-DOF object manipulator system using a single sphere,” <i>Measurement Science and Technology</i>, vol. 34, no. 1, Art. no. 015403, 2022, doi: <a href=\"https://doi.org/10.1088/1361-6501/ac9856\">10.1088/1361-6501/ac9856</a>."},"publication_status":"published","language":[{"iso":"eng"}],"year":"2022","publication_identifier":{"issn":["0957-0233","1361-6501"]},"status":"public","date_created":"2022-12-07T10:46:14Z","publisher":"IOP Publishing","date_updated":"2023-01-13T14:34:31Z","_id":"34264","project":[{"grant_number":"418701707","name":"TRR 285: TRR 285","_id":"130"},{"_id":"133","name":"TRR 285 - C: TRR 285 - Project Area C"},{"_id":"149","name":"TRR 285 – C05: TRR 285 - Subproject C05"}],"abstract":[{"text":"In industrial x-ray computed tomography (CT), the application of more complex scan paths in comparison to the typical circular trajectory (${360}^{\\circ}$ rotation of the measurement object) can extend the potential of CT. One way to enable such 3D scan trajectories is to use a 6-degrees-of-freedom (DOF) object manipulator system. In our case, a hexapod is mounted on top of the rotary table of a commercial CT scanner. This allows for adaptive tilting of the measurement object during the scan. For high accuracy, the geometry calibration of such setups is typically done using the x-ray projections of a calibrated multi-sphere object. Contrary to this, here, we demonstrate a procedure that is based on only a single sphere and can therefore experimentally be implemented with low effort. Using the intrinsic geometry parameters of the CT device as prior information, the hexapod coordinate system with respect to the CT machine coordinate system is determined by means of a one-step optimization approach. The resulting parameters are used to calculate projection matrices that enable the volume reconstruction for 3D scan trajectories. The method is validated using simulated x-ray images and experimental investigations including dimensional measurements. For the used setup, geometric measurement results for 3D scan trajectories that are calibrated with the presented method show in sum increased errors compared to the circular scans. A limited pose accuracy of the manipulator system is discussed as a potential cause. The results nevertheless indicate that the presented method is generally feasible for dimensional CT measurements provided that the pose accuracy is sufficient. The calibration procedure can therefore be a low-cost and easier to implement alternative compared to trajectory calibration methods based on multi-sphere objects, but with a tendency towards lower measurement accuracy. The methodology can in principle be transferred to different setups with 6-DOF manipulator systems, e.g. C-arm CT devices with a robot arm.","lang":"eng"}],"doi":"10.1088/1361-6501/ac9856","title":"Calibration of 3D scan trajectories for an industrial computed tomography setup with 6-DOF object manipulator system using a single sphere","keyword":["Applied Mathematics","Instrumentation","Engineering (miscellaneous)"],"main_file_link":[{"open_access":"1","url":"https://iopscience.iop.org/article/10.1088/1361-6501/ac9856"}],"oa":"1","user_id":"7850","type":"journal_article","publication":"Measurement Science and Technology","article_number":"015403","issue":"1","volume":34},{"date_created":"2022-08-18T09:33:54Z","publisher":"Trans Tech Publications, Ltd.","publication_identifier":{"issn":["1662-9795"]},"year":"2022","language":[{"iso":"eng"}],"status":"public","_id":"33002","date_updated":"2023-01-17T09:02:59Z","conference":{"location":"Braga, Portugal","name":"ESAFORM 2022"},"author":[{"full_name":"Böhnke, Max","first_name":"Max","id":"45779","last_name":"Böhnke"},{"first_name":"Eduard","full_name":"Unruh, Eduard","id":"72763","last_name":"Unruh"},{"full_name":"Sell, Stanislaw","first_name":"Stanislaw","last_name":"Sell"},{"last_name":"Bobbert","id":"7850","full_name":"Bobbert, Mathias","first_name":"Mathias"},{"first_name":"David","full_name":"Hein, David","last_name":"Hein","id":"7728"},{"orcid":"0000-0002-2763-1246","first_name":"Gerson","full_name":"Meschut, Gerson","id":"32056","last_name":"Meschut"}],"intvolume":"       926","citation":{"bibtex":"@article{Böhnke_Unruh_Sell_Bobbert_Hein_Meschut_2022, title={Functionality Study of an Optical Measurement Concept for Local Force Signal Determination in High Strain Rate Tensile Tests}, volume={926}, DOI={<a href=\"https://doi.org/10.4028/p-wpuzyw\">10.4028/p-wpuzyw</a>}, journal={Key Engineering Materials}, publisher={Trans Tech Publications, Ltd.}, author={Böhnke, Max and Unruh, Eduard and Sell, Stanislaw and Bobbert, Mathias and Hein, David and Meschut, Gerson}, year={2022}, pages={1564–1572} }","mla":"Böhnke, Max, et al. “Functionality Study of an Optical Measurement Concept for Local Force Signal Determination in High Strain Rate Tensile Tests.” <i>Key Engineering Materials</i>, vol. 926, Trans Tech Publications, Ltd., 2022, pp. 1564–72, doi:<a href=\"https://doi.org/10.4028/p-wpuzyw\">10.4028/p-wpuzyw</a>.","short":"M. Böhnke, E. Unruh, S. Sell, M. Bobbert, D. Hein, G. Meschut, Key Engineering Materials 926 (2022) 1564–1572.","ama":"Böhnke M, Unruh E, Sell S, Bobbert M, Hein D, Meschut G. Functionality Study of an Optical Measurement Concept for Local Force Signal Determination in High Strain Rate Tensile Tests. <i>Key Engineering Materials</i>. 2022;926:1564-1572. doi:<a href=\"https://doi.org/10.4028/p-wpuzyw\">10.4028/p-wpuzyw</a>","apa":"Böhnke, M., Unruh, E., Sell, S., Bobbert, M., Hein, D., &#38; Meschut, G. (2022). Functionality Study of an Optical Measurement Concept for Local Force Signal Determination in High Strain Rate Tensile Tests. <i>Key Engineering Materials</i>, <i>926</i>, 1564–1572. <a href=\"https://doi.org/10.4028/p-wpuzyw\">https://doi.org/10.4028/p-wpuzyw</a>","ieee":"M. Böhnke, E. Unruh, S. Sell, M. Bobbert, D. Hein, and G. Meschut, “Functionality Study of an Optical Measurement Concept for Local Force Signal Determination in High Strain Rate Tensile Tests,” <i>Key Engineering Materials</i>, vol. 926, pp. 1564–1572, 2022, doi: <a href=\"https://doi.org/10.4028/p-wpuzyw\">10.4028/p-wpuzyw</a>.","chicago":"Böhnke, Max, Eduard Unruh, Stanislaw Sell, Mathias Bobbert, David Hein, and Gerson Meschut. “Functionality Study of an Optical Measurement Concept for Local Force Signal Determination in High Strain Rate Tensile Tests.” <i>Key Engineering Materials</i> 926 (2022): 1564–72. <a href=\"https://doi.org/10.4028/p-wpuzyw\">https://doi.org/10.4028/p-wpuzyw</a>."},"publication_status":"published","department":[{"_id":"157"},{"_id":"630"}],"publication":"Key Engineering Materials","quality_controlled":"1","type":"journal_article","page":"1564-1572","volume":926,"title":"Functionality Study of an Optical Measurement Concept for Local Force Signal Determination in High Strain Rate Tensile Tests","project":[{"grant_number":"418701707","name":"TRR 285: TRR 285","_id":"130"},{"_id":"131","name":"TRR 285 - A: TRR 285 - Project Area A"},{"_id":"135","name":"TRR 285 – A01: TRR 285 - Subproject A01"}],"abstract":[{"lang":"eng","text":"<jats:p>Many mechanical material properties show a dependence on the strain rate, e.g. yield stress or elongation at fracture. The quantitative description of the material behavior under dynamic loading is of major importance for the evaluation of crash safety. This is carried out using numerical methods and requires characteristic values for the materials used. For the standardized determination of dynamic characteristic values in sheet metal materials, tensile tests performed according to the guideline from [1]. A particular challenge in dynamic tensile tests is the force measurement during the test. For this purpose, strain gauges are attached on each specimen, wired to the measuring equipment and calibrated. This is a common way to determine a force signal that is as low in vibration and as free of bending moments as possible. The preparation effort for the used strain gauges are enormous. For these reasons, an optical method to determine the force by strain measurement using DIC is presented. The experiments are carried out on a high speed tensile testing system. In combioantion with a 3D DIC high speed system for optical strain measurement. The elastic deformation of the specimen in the dynamometric section is measured using strain gauges and the optical method. The measured signals are then compared to validate the presented method. The investigations are conducted using the dual phase steel material HCT590X and the aluminum material EN AW-6014 T4. Strain rates of up to 240 s-1 are investigated.</jats:p>"}],"doi":"10.4028/p-wpuzyw","user_id":"45779","keyword":["Mechanical Engineering","Mechanics of Materials","General Materials Science"]},{"volume":7,"page":"91-106","type":"conference","publication":"Bericht 407 - 7. Tagung des DVM-Arbeitskreises Additiv gefertigte Bauteile und Strukturen","user_id":"44204","keyword":["Künstliche Intelligenz","Neuronale Netze","3D-Druck","Design for Additive Manufacturing"],"doi":"10.48447/ADD-2022-014","abstract":[{"lang":"ger","text":"Die additive Fertigung bietet die Möglichkeit, digitale Prototypen dank der\r\nBesonderheit der werkzeuglosen Fertigung schnellstmöglich in reale Strukturen\r\numzusetzen. Dieses Verfahren kann jedoch nur dann mit optimaler Geschwindigkeit\r\ngenutzt werden, wenn Engpässe wirksam vermieden werden können. Einer dieser\r\nEngpässe ist der Konstruktionsprozess. Gerade im Bereich der additiven Fertigung\r\nsind in letzter Zeit immer leistungsfähigere Softwarelösungen erschienen, die das\r\nDesign für die additive Fertigung, einschließlich der meisten Computer-Aided-Design\r\n(CAD)-Aufgaben, beschleunigen. In vielen Bereichen wird daher bereits versucht, so\r\nviele Schritte wie möglich zu automatisieren, nicht selten unter Verwendung\r\nneuronaler Netze und künstlicher Intelligenz. Dieser Beitrag zeigt am Beispiel einer\r\nautomatisierten Strukturoptimierung eines Stuhls, warum das Nutzen neuronaler\r\nNetze im Konstruktionsprozess sinnvoll ist, um die Bereiche der konventionellen\r\nTopologieoptimierung und des Generative Design weiter zu verknüpfen und somit die\r\nProduktentwicklungszeit zu reduzieren."}],"title":"Neuronale Netze in der Konstruktion zur Ausschöpfung der Potentiale additiver Fertigungstechnologien","date_updated":"2023-01-18T08:52:56Z","_id":"36866","status":"public","year":"2022","language":[{"iso":"ger"}],"date_created":"2023-01-16T08:42:28Z","jel":["L74"],"department":[{"_id":"741"},{"_id":"144"}],"corporate_editor":["Deutscher Verband für Materialforschung und -prüfung e.V. "],"publication_status":"published","series_title":"Bericht 407 - 7. Tagung des DVM-Arbeitskreises Additiv gefertigte Bauteile und Strukturen","citation":{"ama":"Ott M, Meihöfener N, Koch R. Neuronale Netze in der Konstruktion zur Ausschöpfung der Potentiale additiver Fertigungstechnologien. In: Deutscher Verband für Materialforschung und -prüfung e.V. , ed. <i>Bericht 407 - 7. Tagung des DVM-Arbeitskreises Additiv gefertigte Bauteile und Strukturen</i>. Vol 7. Bericht 407 - 7. Tagung des DVM-Arbeitskreises Additiv gefertigte Bauteile und Strukturen. ; 2022:91-106. doi:<a href=\"https://doi.org/10.48447/ADD-2022-014\">10.48447/ADD-2022-014</a>","bibtex":"@inproceedings{Ott_Meihöfener_Koch_2022, place={Berlin}, series={Bericht 407 - 7. Tagung des DVM-Arbeitskreises Additiv gefertigte Bauteile und Strukturen}, title={Neuronale Netze in der Konstruktion zur Ausschöpfung der Potentiale additiver Fertigungstechnologien}, volume={7}, DOI={<a href=\"https://doi.org/10.48447/ADD-2022-014\">10.48447/ADD-2022-014</a>}, booktitle={Bericht 407 - 7. Tagung des DVM-Arbeitskreises Additiv gefertigte Bauteile und Strukturen}, author={Ott, Manuel and Meihöfener, Niclas and Koch, Rainer}, editor={Deutscher Verband für Materialforschung und -prüfung e.V. }, year={2022}, pages={91–106}, collection={Bericht 407 - 7. Tagung des DVM-Arbeitskreises Additiv gefertigte Bauteile und Strukturen} }","apa":"Ott, M., Meihöfener, N., &#38; Koch, R. (2022). Neuronale Netze in der Konstruktion zur Ausschöpfung der Potentiale additiver Fertigungstechnologien. In Deutscher Verband für Materialforschung und -prüfung e.V.  (Ed.), <i>Bericht 407 - 7. Tagung des DVM-Arbeitskreises Additiv gefertigte Bauteile und Strukturen</i> (Vol. 7, pp. 91–106). <a href=\"https://doi.org/10.48447/ADD-2022-014\">https://doi.org/10.48447/ADD-2022-014</a>","mla":"Ott, Manuel, et al. “Neuronale Netze in der Konstruktion zur Ausschöpfung der Potentiale additiver Fertigungstechnologien.” <i>Bericht 407 - 7. Tagung des DVM-Arbeitskreises Additiv gefertigte Bauteile und Strukturen</i>, edited by Deutscher Verband für Materialforschung und -prüfung e.V. , vol. 7, 2022, pp. 91–106, doi:<a href=\"https://doi.org/10.48447/ADD-2022-014\">10.48447/ADD-2022-014</a>.","ieee":"M. Ott, N. Meihöfener, and R. Koch, “Neuronale Netze in der Konstruktion zur Ausschöpfung der Potentiale additiver Fertigungstechnologien,” in <i>Bericht 407 - 7. Tagung des DVM-Arbeitskreises Additiv gefertigte Bauteile und Strukturen</i>, Berlin, 2022, vol. 7, pp. 91–106, doi: <a href=\"https://doi.org/10.48447/ADD-2022-014\">10.48447/ADD-2022-014</a>.","short":"M. Ott, N. Meihöfener, R. Koch, in: Deutscher Verband für Materialforschung und -prüfung e.V.  (Ed.), Bericht 407 - 7. Tagung des DVM-Arbeitskreises Additiv gefertigte Bauteile und Strukturen, Berlin, 2022, pp. 91–106.","chicago":"Ott, Manuel, Niclas Meihöfener, and Rainer Koch. “Neuronale Netze in der Konstruktion zur Ausschöpfung der Potentiale additiver Fertigungstechnologien.” In <i>Bericht 407 - 7. Tagung des DVM-Arbeitskreises Additiv gefertigte Bauteile und Strukturen</i>, edited by Deutscher Verband für Materialforschung und -prüfung e.V. , 7:91–106. Bericht 407 - 7. Tagung des DVM-Arbeitskreises Additiv gefertigte Bauteile und Strukturen. Berlin, 2022. <a href=\"https://doi.org/10.48447/ADD-2022-014\">https://doi.org/10.48447/ADD-2022-014</a>."},"intvolume":"         7","place":"Berlin","author":[{"first_name":"Manuel","full_name":"Ott, Manuel","last_name":"Ott","id":"44204"},{"last_name":"Meihöfener","first_name":"Niclas","full_name":"Meihöfener, Niclas"},{"last_name":"Koch","full_name":"Koch, Rainer","first_name":"Rainer"}],"conference":{"end_date":"2022-11-09","name":"7. Tagung des DVM-Arbeitskreises Additiv gefertigte Bauteile und Strukturen","start_date":"2022-11-08","location":"Berlin"}},{"status":"public","year":"2022","type":"conference","language":[{"iso":"eng"}],"publisher":"IEEE","publication":"EPE'22 ECCE Europe","date_created":"2022-09-27T10:47:02Z","date_updated":"2023-01-19T19:06:22Z","_id":"33489","place":"Hannover","author":[{"last_name":"Lange","id":"78801","first_name":"Jarren","full_name":"Lange, Jarren"},{"id":"7173","last_name":"Schmies","first_name":"Dominik","full_name":"Schmies, Dominik"},{"first_name":"Karl Stephan Christian","full_name":"Stille, Karl Stephan Christian","last_name":"Stille","id":"30152","orcid":"0000-0002-4212-6555"},{"last_name":"Böcker","id":"66","first_name":"Joachim","full_name":"Böcker, Joachim","orcid":"0000-0002-8480-7295"},{"last_name":"Wallscheid","id":"11291","full_name":"Wallscheid, Oliver","first_name":"Oliver","orcid":"https://orcid.org/0000-0001-9362-8777"}],"conference":{"name":"EPE'22 ECCE Europe","location":"Hannover"},"title":"Experimental Comparison of FPGA-Implemented Model Predictive Voltage Control to Cascaded Proportional Resonant Control for a Three-Phase Four-Wire Three-Level Grid-Forming Inverter of 250 kVA","department":[{"_id":"52"}],"user_id":"66","main_file_link":[{"url":"https://ieeexplore.ieee.org/document/9907737"}],"citation":{"bibtex":"@inproceedings{Lange_Schmies_Stille_Böcker_Wallscheid_2022, place={Hannover}, title={Experimental Comparison of FPGA-Implemented Model Predictive Voltage Control to Cascaded Proportional Resonant Control for a Three-Phase Four-Wire Three-Level Grid-Forming Inverter of 250 kVA}, booktitle={EPE’22 ECCE Europe}, publisher={IEEE}, author={Lange, Jarren and Schmies, Dominik and Stille, Karl Stephan Christian and Böcker, Joachim and Wallscheid, Oliver}, year={2022} }","ama":"Lange J, Schmies D, Stille KSC, Böcker J, Wallscheid O. Experimental Comparison of FPGA-Implemented Model Predictive Voltage Control to Cascaded Proportional Resonant Control for a Three-Phase Four-Wire Three-Level Grid-Forming Inverter of 250 kVA. In: <i>EPE’22 ECCE Europe</i>. IEEE; 2022.","apa":"Lange, J., Schmies, D., Stille, K. S. C., Böcker, J., &#38; Wallscheid, O. (2022). Experimental Comparison of FPGA-Implemented Model Predictive Voltage Control to Cascaded Proportional Resonant Control for a Three-Phase Four-Wire Three-Level Grid-Forming Inverter of 250 kVA. <i>EPE’22 ECCE Europe</i>. EPE’22 ECCE Europe, Hannover.","mla":"Lange, Jarren, et al. “Experimental Comparison of FPGA-Implemented Model Predictive Voltage Control to Cascaded Proportional Resonant Control for a Three-Phase Four-Wire Three-Level Grid-Forming Inverter of 250 KVA.” <i>EPE’22 ECCE Europe</i>, IEEE, 2022.","ieee":"J. Lange, D. Schmies, K. S. C. Stille, J. Böcker, and O. Wallscheid, “Experimental Comparison of FPGA-Implemented Model Predictive Voltage Control to Cascaded Proportional Resonant Control for a Three-Phase Four-Wire Three-Level Grid-Forming Inverter of 250 kVA,” presented at the EPE’22 ECCE Europe, Hannover, 2022.","short":"J. Lange, D. Schmies, K.S.C. Stille, J. Böcker, O. Wallscheid, in: EPE’22 ECCE Europe, IEEE, Hannover, 2022.","chicago":"Lange, Jarren, Dominik Schmies, Karl Stephan Christian Stille, Joachim Böcker, and Oliver Wallscheid. “Experimental Comparison of FPGA-Implemented Model Predictive Voltage Control to Cascaded Proportional Resonant Control for a Three-Phase Four-Wire Three-Level Grid-Forming Inverter of 250 KVA.” In <i>EPE’22 ECCE Europe</i>. Hannover: IEEE, 2022."}},{"date_created":"2023-01-24T09:03:49Z","year":"2022","publication_identifier":{"isbn":[" 2626-0913"]},"type":"conference","language":[{"iso":"eng"}],"status":"public","_id":"39066","date_updated":"2023-01-24T09:12:46Z","conference":{"end_date":"2021-09-24","start_date":"2021-09-23","location":"Hannover","name":"Leben 2050. Haushaltswissenschaftliche Perspektiven.  Dokumentation der Jubiläumstagung der Deutschen Gesellschaft für Hauswirtschaft vom 23. und 24. September 2021"},"title":"Alltagsmanagement und Alltagskompetenzen von Familien in besonderen Lebenslagen. Eine qualitative Studie über Informations- und Unterstützungsbedarfe von jungen Familien in Deutschland.","author":[{"last_name":"Wicker","id":"94976","first_name":"Kathrin","full_name":"Wicker, Kathrin"}],"place":"Rheine","doi":" 10.23782/HUW_02_2022","citation":{"ama":"Wicker K. Alltagsmanagement und Alltagskompetenzen von Familien in besonderen Lebenslagen. Eine qualitative Studie über Informations- und Unterstützungsbedarfe von jungen Familien in Deutschland. In: Deutsche Gesellschaft für Hauswirtschaft e.V., ed. ; 2022. doi:<a href=\"https://doi.org/ 10.23782/HUW_02_2022\"> 10.23782/HUW_02_2022</a>","apa":"Wicker, K. (2022). <i>Alltagsmanagement und Alltagskompetenzen von Familien in besonderen Lebenslagen. Eine qualitative Studie über Informations- und Unterstützungsbedarfe von jungen Familien in Deutschland.</i> (Deutsche Gesellschaft für Hauswirtschaft e.V., Ed.). <a href=\"https://doi.org/ 10.23782/HUW_02_2022\">https://doi.org/ 10.23782/HUW_02_2022</a>","chicago":"Wicker, Kathrin. “Alltagsmanagement Und Alltagskompetenzen von Familien in Besonderen Lebenslagen. Eine Qualitative Studie Über Informations- Und Unterstützungsbedarfe von Jungen Familien in Deutschland.” edited by Deutsche Gesellschaft für Hauswirtschaft e.V. Rheine, 2022. <a href=\"https://doi.org/ 10.23782/HUW_02_2022\">https://doi.org/ 10.23782/HUW_02_2022</a>.","ieee":"K. Wicker, “Alltagsmanagement und Alltagskompetenzen von Familien in besonderen Lebenslagen. Eine qualitative Studie über Informations- und Unterstützungsbedarfe von jungen Familien in Deutschland.,” Hannover, 2022, doi: <a href=\"https://doi.org/ 10.23782/HUW_02_2022\"> 10.23782/HUW_02_2022</a>.","mla":"Wicker, Kathrin. <i>Alltagsmanagement Und Alltagskompetenzen von Familien in Besonderen Lebenslagen. Eine Qualitative Studie Über Informations- Und Unterstützungsbedarfe von Jungen Familien in Deutschland.</i> Edited by Deutsche Gesellschaft für Hauswirtschaft e.V., 2022, doi:<a href=\"https://doi.org/ 10.23782/HUW_02_2022\"> 10.23782/HUW_02_2022</a>.","bibtex":"@inproceedings{Wicker_2022, place={Rheine}, title={Alltagsmanagement und Alltagskompetenzen von Familien in besonderen Lebenslagen. Eine qualitative Studie über Informations- und Unterstützungsbedarfe von jungen Familien in Deutschland.}, DOI={<a href=\"https://doi.org/ 10.23782/HUW_02_2022\"> 10.23782/HUW_02_2022</a>}, author={Wicker, Kathrin}, editor={Deutsche Gesellschaft für Hauswirtschaft e.V.}, year={2022} }","short":"K. Wicker, in: Deutsche Gesellschaft für Hauswirtschaft e.V. (Ed.), Rheine, 2022."},"user_id":"94976","corporate_editor":["Deutsche Gesellschaft für Hauswirtschaft e.V."],"department":[{"_id":"394"}]},{"author":[{"last_name":"Wicker","id":"94976","full_name":"Wicker, Kathrin","first_name":"Kathrin"}],"title":"Alltagsmanagement und Alltagskompetenzen von Familien in besonderen Lebenslagen","place":"Wiedenbach","user_id":"94976","main_file_link":[{"url":"https://www.stmelf.bayern.de/berufsbildung/berufe_hauswirtschaft/296855/index.php"}],"citation":{"apa":"Wicker, K. (2022). <i>Alltagsmanagement und Alltagskompetenzen von Familien in besonderen Lebenslagen</i>. Kompetenzzentrum Hauswirtschaft Bayern.","ama":"Wicker K. <i>Alltagsmanagement Und Alltagskompetenzen von Familien in Besonderen Lebenslagen</i>. Kompetenzzentrum Hauswirtschaft Bayern; 2022.","chicago":"Wicker, Kathrin. <i>Alltagsmanagement Und Alltagskompetenzen von Familien in Besonderen Lebenslagen</i>. Wiedenbach: Kompetenzzentrum Hauswirtschaft Bayern, 2022.","ieee":"K. Wicker, <i>Alltagsmanagement und Alltagskompetenzen von Familien in besonderen Lebenslagen</i>. Wiedenbach: Kompetenzzentrum Hauswirtschaft Bayern, 2022.","mla":"Wicker, Kathrin. <i>Alltagsmanagement Und Alltagskompetenzen von Familien in Besonderen Lebenslagen</i>. Kompetenzzentrum Hauswirtschaft Bayern, 2022.","bibtex":"@book{Wicker_2022, place={Wiedenbach}, title={Alltagsmanagement und Alltagskompetenzen von Familien in besonderen Lebenslagen}, publisher={Kompetenzzentrum Hauswirtschaft Bayern}, author={Wicker, Kathrin}, year={2022} }","short":"K. Wicker, Alltagsmanagement Und Alltagskompetenzen von Familien in Besonderen Lebenslagen, Kompetenzzentrum Hauswirtschaft Bayern, Wiedenbach, 2022."},"department":[{"_id":"394"}],"publisher":"Kompetenzzentrum Hauswirtschaft Bayern","related_material":{"link":[{"url":"https://www.stmelf.bayern.de/berufsbildung/berufe_hauswirtschaft/296855/index.php","relation":"confirmation"}]},"date_created":"2023-01-24T09:09:08Z","status":"public","year":"2022","type":"working_paper","language":[{"iso":"eng"}],"_id":"39076","date_updated":"2023-01-24T09:13:59Z"},{"citation":{"apa":"Stutz, B., Buyken, A., Schadow, A. M., Jankovic, N., Alexy, U., &#38; Krueger, B. (2022). Associations of chronotype and social jetlag with eating jetlag and their changes among German students during the first COVID-19 lockdown. The Chronotype and Nutrition study. <i>Appetite</i>, <i>180</i>, Article 106333. <a href=\"https://doi.org/10.1016/j.appet.2022.106333\">https://doi.org/10.1016/j.appet.2022.106333</a>","ama":"Stutz B, Buyken A, Schadow AM, Jankovic N, Alexy U, Krueger B. Associations of chronotype and social jetlag with eating jetlag and their changes among German students during the first COVID-19 lockdown. The Chronotype and Nutrition study. <i>Appetite</i>. 2022;180. doi:<a href=\"https://doi.org/10.1016/j.appet.2022.106333\">10.1016/j.appet.2022.106333</a>","ieee":"B. Stutz, A. Buyken, A. M. Schadow, N. Jankovic, U. Alexy, and B. Krueger, “Associations of chronotype and social jetlag with eating jetlag and their changes among German students during the first COVID-19 lockdown. The Chronotype and Nutrition study,” <i>Appetite</i>, vol. 180, Art. no. 106333, 2022, doi: <a href=\"https://doi.org/10.1016/j.appet.2022.106333\">10.1016/j.appet.2022.106333</a>.","chicago":"Stutz, Bianca, Anette Buyken, A.M. Schadow, N. Jankovic, U. Alexy, and B. Krueger. “Associations of Chronotype and Social Jetlag with Eating Jetlag and Their Changes among German Students during the First COVID-19 Lockdown. The Chronotype and Nutrition Study.” <i>Appetite</i> 180 (2022). <a href=\"https://doi.org/10.1016/j.appet.2022.106333\">https://doi.org/10.1016/j.appet.2022.106333</a>.","bibtex":"@article{Stutz_Buyken_Schadow_Jankovic_Alexy_Krueger_2022, title={Associations of chronotype and social jetlag with eating jetlag and their changes among German students during the first COVID-19 lockdown. The Chronotype and Nutrition study}, volume={180}, DOI={<a href=\"https://doi.org/10.1016/j.appet.2022.106333\">10.1016/j.appet.2022.106333</a>}, number={106333}, journal={Appetite}, publisher={Elsevier BV}, author={Stutz, Bianca and Buyken, Anette and Schadow, A.M. and Jankovic, N. and Alexy, U. and Krueger, B.}, year={2022} }","mla":"Stutz, Bianca, et al. “Associations of Chronotype and Social Jetlag with Eating Jetlag and Their Changes among German Students during the First COVID-19 Lockdown. The Chronotype and Nutrition Study.” <i>Appetite</i>, vol. 180, 106333, Elsevier BV, 2022, doi:<a href=\"https://doi.org/10.1016/j.appet.2022.106333\">10.1016/j.appet.2022.106333</a>.","short":"B. Stutz, A. Buyken, A.M. Schadow, N. Jankovic, U. Alexy, B. Krueger, Appetite 180 (2022)."},"publication_status":"published","keyword":["Nutrition and Dietetics","General Psychology"],"user_id":"61597","department":[{"_id":"35"},{"_id":"22"}],"title":"Associations of chronotype and social jetlag with eating jetlag and their changes among German students during the first COVID-19 lockdown. The Chronotype and Nutrition study","author":[{"first_name":"Bianca","full_name":"Stutz, Bianca","last_name":"Stutz","id":"77099"},{"full_name":"Buyken, Anette","first_name":"Anette","id":"65985","last_name":"Buyken"},{"full_name":"Schadow, A.M.","first_name":"A.M.","last_name":"Schadow"},{"last_name":"Jankovic","full_name":"Jankovic, N.","first_name":"N."},{"last_name":"Alexy","first_name":"U.","full_name":"Alexy, U."},{"last_name":"Krueger","first_name":"B.","full_name":"Krueger, B."}],"intvolume":"       180","doi":"10.1016/j.appet.2022.106333","_id":"35754","volume":180,"article_number":"106333","date_updated":"2023-01-24T11:54:36Z","date_created":"2023-01-10T10:21:17Z","publication":"Appetite","publisher":"Elsevier BV","language":[{"iso":"eng"}],"publication_identifier":{"issn":["0195-6663"]},"type":"journal_article","year":"2022","status":"public"},{"citation":{"short":"J. Goletzke, K. Weber, T. Kössler, O. Zaharia, K. Bódis, K. Müssig, J. Szendroedi, V. Burkart, B. Stutz, U. Nöthlings, A. Buyken, M. Roden, G. Group, Nutr Metab Cardiovasc Dis 32 (2022) 2310–2320.","bibtex":"@article{Goletzke_Weber_Kössler_Zaharia_Bódis_Müssig_Szendroedi_Burkart_Stutz_Nöthlings_et al._2022, title={Relative validity of a glycemic index extended food-frequency questionnaire.}, volume={32}, number={10}, journal={Nutr Metab Cardiovasc Dis}, author={Goletzke, J and Weber, KS and Kössler, T and Zaharia, OP and Bódis, K and Müssig, K and Szendroedi, J and Burkart, V and Stutz, Bianca and Nöthlings, U and et al.}, year={2022}, pages={2310–2320} }","mla":"Goletzke, J., et al. “Relative Validity of a Glycemic Index Extended Food-Frequency Questionnaire.” <i>Nutr Metab Cardiovasc Dis</i>, vol. 32, no. 10, 2022, pp. 2310–20.","ieee":"J. Goletzke <i>et al.</i>, “Relative validity of a glycemic index extended food-frequency questionnaire.,” <i>Nutr Metab Cardiovasc Dis</i>, vol. 32, no. 10, pp. 2310–2320, 2022.","chicago":"Goletzke, J, KS Weber, T Kössler, OP Zaharia, K Bódis, K Müssig, J Szendroedi, et al. “Relative Validity of a Glycemic Index Extended Food-Frequency Questionnaire.” <i>Nutr Metab Cardiovasc Dis</i> 32, no. 10 (2022): 2310–20.","ama":"Goletzke J, Weber K, Kössler T, et al. Relative validity of a glycemic index extended food-frequency questionnaire. <i>Nutr Metab Cardiovasc Dis</i>. 2022;32(10):2310-2320.","apa":"Goletzke, J., Weber, K., Kössler, T., Zaharia, O., Bódis, K., Müssig, K., Szendroedi, J., Burkart, V., Stutz, B., Nöthlings, U., Buyken, A., Roden, M., &#38; Group, G. (2022). Relative validity of a glycemic index extended food-frequency questionnaire. <i>Nutr Metab Cardiovasc Dis</i>, <i>32</i>(10), 2310–2320."},"user_id":"61597","external_id":{"pmid":["35973887"]},"department":[{"_id":"35"},{"_id":"17"},{"_id":"22"},{"_id":"571"}],"title":"Relative validity of a glycemic index extended food-frequency questionnaire.","author":[{"last_name":"Goletzke","first_name":"J","full_name":"Goletzke, J"},{"last_name":"Weber","first_name":"KS","full_name":"Weber, KS"},{"full_name":"Kössler, T","first_name":"T","last_name":"Kössler"},{"first_name":"OP","full_name":"Zaharia, OP","last_name":"Zaharia"},{"first_name":"K","full_name":"Bódis, K","last_name":"Bódis"},{"full_name":"Müssig, K","first_name":"K","last_name":"Müssig"},{"last_name":"Szendroedi","full_name":"Szendroedi, J","first_name":"J"},{"full_name":"Burkart, V","first_name":"V","last_name":"Burkart"},{"full_name":"Stutz, Bianca","first_name":"Bianca","last_name":"Stutz","id":"77099"},{"last_name":"Nöthlings","full_name":"Nöthlings, U","first_name":"U"},{"id":"65985","last_name":"Buyken","first_name":"Anette","full_name":"Buyken, Anette"},{"first_name":"M","full_name":"Roden, M","last_name":"Roden"},{"last_name":"Group","full_name":"Group, GDS","first_name":"GDS"}],"pmid":"1","intvolume":"        32","page":"2310-2320","_id":"35310","volume":32,"date_updated":"2023-01-24T11:54:58Z","issue":"10","publication":"Nutr Metab Cardiovasc Dis","date_created":"2023-01-05T16:35:24Z","publication_identifier":{"issn":["0939-4753","1590-3729"]},"year":"2022","type":"journal_article","language":[{"iso":"eng"}],"status":"public"},{"_id":"40267","date_updated":"2023-01-26T10:43:54Z","date_created":"2023-01-26T10:16:21Z","language":[{"iso":"eng"}],"year":"2022","type":"conference","status":"public","citation":{"mla":"Depenbusch, Sarah, et al. <i>Effects of Digital Transformation on Job Satisfaction and Employee Retention: An Integrative Framework</i>. 2022.","bibtex":"@inproceedings{Depenbusch_Schürmann_Schaper_Seifert_Schumacher_Straatmann_2022, title={Effects of Digital Transformation on Job Satisfaction and Employee Retention: An Integrative Framework}, author={Depenbusch, Sarah and Schürmann, Mirko and Schaper, Niclas and Seifert, Andreas and Schumacher, Jan-Philip and Straatmann, Tammo}, year={2022} }","short":"S. Depenbusch, M. Schürmann, N. Schaper, A. Seifert, J.-P. Schumacher, T. Straatmann, in: 2022.","ama":"Depenbusch S, Schürmann M, Schaper N, Seifert A, Schumacher J-P, Straatmann T. Effects of Digital Transformation on Job Satisfaction and Employee Retention: An Integrative Framework. In: ; 2022.","apa":"Depenbusch, S., Schürmann, M., Schaper, N., Seifert, A., Schumacher, J.-P., &#38; Straatmann, T. (2022). <i>Effects of Digital Transformation on Job Satisfaction and Employee Retention: An Integrative Framework</i>. EAWOP Kongress der European Association of Work and Organizational Psychology (EAWOP 22), Glasgow.","chicago":"Depenbusch, Sarah, Mirko Schürmann, Niclas Schaper, Andreas Seifert, Jan-Philip Schumacher, and Tammo Straatmann. “Effects of Digital Transformation on Job Satisfaction and Employee Retention: An Integrative Framework,” 2022.","ieee":"S. Depenbusch, M. Schürmann, N. Schaper, A. Seifert, J.-P. Schumacher, and T. Straatmann, “Effects of Digital Transformation on Job Satisfaction and Employee Retention: An Integrative Framework,” presented at the EAWOP Kongress der European Association of Work and Organizational Psychology (EAWOP 22), Glasgow, 2022."},"user_id":"693","department":[{"_id":"423"}],"title":"Effects of Digital Transformation on Job Satisfaction and Employee Retention: An Integrative Framework","conference":{"end_date":"14.01.2022","location":"Glasgow","start_date":"11.01.2022","name":"EAWOP Kongress der European Association of Work and Organizational Psychology (EAWOP 22)"},"author":[{"last_name":"Depenbusch","id":"32536","full_name":"Depenbusch, Sarah","first_name":"Sarah","orcid":"0000-0003-0655-9000"},{"first_name":"Mirko","full_name":"Schürmann, Mirko","id":"59707","last_name":"Schürmann","orcid":"0000-0003-2646-085X"},{"full_name":"Schaper, Niclas","first_name":"Niclas","last_name":"Schaper"},{"id":"693","last_name":"Seifert","first_name":"Andreas","full_name":"Seifert, Andreas"},{"first_name":"Jan-Philip","full_name":"Schumacher, Jan-Philip","last_name":"Schumacher"},{"full_name":"Straatmann, Tammo","first_name":"Tammo","last_name":"Straatmann"}]},{"publication":"22. Kolloquium: Gemeinsame Forschung in der Klebtechnik","date_created":"2022-02-16T07:15:44Z","status":"public","year":"2022","type":"conference","language":[{"iso":"ger"}],"_id":"29853","date_updated":"2023-02-08T08:43:39Z","author":[{"full_name":"Tews, Karina","first_name":"Karina","last_name":"Tews","id":"40263"},{"last_name":"Aubel","full_name":"Aubel, Tobias","first_name":"Tobias"},{"full_name":"Teutenberg, Dominik","first_name":"Dominik","last_name":"Teutenberg","id":"537"},{"last_name":"Meschut","id":"32056","first_name":"Gerson","full_name":"Meschut, Gerson","orcid":"0000-0002-2763-1246"},{"first_name":"Tobias","full_name":"Duffe, Tobias","last_name":"Duffe","id":"41322"},{"last_name":"Kullmer","id":"291","full_name":"Kullmer, Gunter","first_name":"Gunter"}],"conference":{"start_date":"2022-02-15","name":"22. Kolloquium: Gemeinsame Forschung in der Klebtechnik","end_date":"2022-02-16"},"title":"Methodenentwicklung zur numerischen Lebensdauerprognose von hyperelastischen Klebverbindungen infolge zyklischer Beanspruchung mittels bruchmechanischer Ansätze ","user_id":"41322","citation":{"bibtex":"@inproceedings{Tews_Aubel_Teutenberg_Meschut_Duffe_Kullmer_2022, title={Methodenentwicklung zur numerischen Lebensdauerprognose von hyperelastischen Klebverbindungen infolge zyklischer Beanspruchung mittels bruchmechanischer Ansätze }, booktitle={22. Kolloquium: Gemeinsame Forschung in der Klebtechnik}, author={Tews, Karina and Aubel, Tobias and Teutenberg, Dominik and Meschut, Gerson and Duffe, Tobias and Kullmer, Gunter}, year={2022} }","mla":"Tews, Karina, et al. “Methodenentwicklung zur numerischen Lebensdauerprognose von hyperelastischen Klebverbindungen infolge zyklischer Beanspruchung mittels bruchmechanischer Ansätze .” <i>22. Kolloquium: Gemeinsame Forschung in der Klebtechnik</i>, 2022.","short":"K. Tews, T. Aubel, D. Teutenberg, G. Meschut, T. Duffe, G. Kullmer, in: 22. Kolloquium: Gemeinsame Forschung in der Klebtechnik, 2022.","apa":"Tews, K., Aubel, T., Teutenberg, D., Meschut, G., Duffe, T., &#38; Kullmer, G. (2022). Methodenentwicklung zur numerischen Lebensdauerprognose von hyperelastischen Klebverbindungen infolge zyklischer Beanspruchung mittels bruchmechanischer Ansätze . <i>22. Kolloquium: Gemeinsame Forschung in der Klebtechnik</i>. 22. Kolloquium: Gemeinsame Forschung in der Klebtechnik.","ama":"Tews K, Aubel T, Teutenberg D, Meschut G, Duffe T, Kullmer G. Methodenentwicklung zur numerischen Lebensdauerprognose von hyperelastischen Klebverbindungen infolge zyklischer Beanspruchung mittels bruchmechanischer Ansätze . In: <i>22. Kolloquium: Gemeinsame Forschung in der Klebtechnik</i>. ; 2022.","ieee":"K. Tews, T. Aubel, D. Teutenberg, G. Meschut, T. Duffe, and G. Kullmer, “Methodenentwicklung zur numerischen Lebensdauerprognose von hyperelastischen Klebverbindungen infolge zyklischer Beanspruchung mittels bruchmechanischer Ansätze ,” presented at the 22. Kolloquium: Gemeinsame Forschung in der Klebtechnik, 2022.","chicago":"Tews, Karina, Tobias Aubel, Dominik Teutenberg, Gerson Meschut, Tobias Duffe, and Gunter Kullmer. “Methodenentwicklung zur numerischen Lebensdauerprognose von hyperelastischen Klebverbindungen infolge zyklischer Beanspruchung mittels bruchmechanischer Ansätze .” In <i>22. Kolloquium: Gemeinsame Forschung in der Klebtechnik</i>, 2022."},"department":[{"_id":"157"},{"_id":"143"}]},{"date_created":"2022-07-01T08:01:53Z","publication":"Proceedings of the 9th International Working Conference on Human-Centered Software Engineering (HCSE'22)","publisher":"Springer","language":[{"iso":"eng"}],"type":"conference","year":"2022","status":"public","_id":"32305","date_updated":"2023-02-14T10:47:15Z","title":"Automated UX Evaluation for User-Centered Design of VR Interfaces","author":[{"id":"70410","last_name":"Karakaya","full_name":"Karakaya, Kadiray","first_name":"Kadiray","orcid":"https://orcid.org/0000-0001-9266-2084"},{"orcid":"0000-0002-5967-833X","id":"8447","last_name":"Yigitbas","full_name":"Yigitbas, Enes","first_name":"Enes"},{"id":"107","last_name":"Engels","first_name":"Gregor","full_name":"Engels, Gregor"}],"citation":{"mla":"Karakaya, Kadiray, et al. “Automated UX Evaluation for User-Centered Design of VR Interfaces.” <i>Proceedings of the 9th International Working Conference on Human-Centered Software Engineering (HCSE’22)</i>, Springer, 2022.","apa":"Karakaya, K., Yigitbas, E., &#38; Engels, G. (2022). Automated UX Evaluation for User-Centered Design of VR Interfaces. <i>Proceedings of the 9th International Working Conference on Human-Centered Software Engineering (HCSE’22)</i>.","bibtex":"@inproceedings{Karakaya_Yigitbas_Engels_2022, title={Automated UX Evaluation for User-Centered Design of VR Interfaces}, booktitle={Proceedings of the 9th International Working Conference on Human-Centered Software Engineering (HCSE’22)}, publisher={Springer}, author={Karakaya, Kadiray and Yigitbas, Enes and Engels, Gregor}, year={2022} }","ama":"Karakaya K, Yigitbas E, Engels G. Automated UX Evaluation for User-Centered Design of VR Interfaces. In: <i>Proceedings of the 9th International Working Conference on Human-Centered Software Engineering (HCSE’22)</i>. Springer; 2022.","chicago":"Karakaya, Kadiray, Enes Yigitbas, and Gregor Engels. “Automated UX Evaluation for User-Centered Design of VR Interfaces.” In <i>Proceedings of the 9th International Working Conference on Human-Centered Software Engineering (HCSE’22)</i>. Springer, 2022.","short":"K. Karakaya, E. Yigitbas, G. Engels, in: Proceedings of the 9th International Working Conference on Human-Centered Software Engineering (HCSE’22), Springer, 2022.","ieee":"K. Karakaya, E. Yigitbas, and G. Engels, “Automated UX Evaluation for User-Centered Design of VR Interfaces,” 2022."},"user_id":"8447","department":[{"_id":"66"},{"_id":"534"}]},{"_id":"30153","date_updated":"2023-03-02T13:32:18Z","date_created":"2022-03-01T09:10:01Z","status":"public","type":"conference","year":"2022","language":[{"iso":"ger"}],"user_id":"44759","corporate_editor":["DECHEMA, Gesellschaft für Chemische Technik und Biotechnologie e.V."],"publication_status":"published","citation":{"bibtex":"@inproceedings{Schmolke_Teutenberg_Meschut_Meinderink_Golebiowska_Rieker_Ebbert_Grundmeier_2022, title={Entwicklung einer Methode zur Bewertung einer stahlintensiven Mischbau-Klebverbindung eines Batteriegehäuses gegenüber mechanischer und medialer Belastung unter Berücksichtigung der Interphasenstruktur}, author={Schmolke, Tobias and Teutenberg, Dominik and Meschut, Gerson and Meinderink, Dennis and Golebiowska, Sandra and Rieker, Florian and Ebbert, Christoph and Grundmeier, Guido}, editor={DECHEMA, Gesellschaft für Chemische Technik und Biotechnologie e.V.}, year={2022} }","mla":"Schmolke, Tobias, et al. <i>Entwicklung einer Methode zur Bewertung einer stahlintensiven Mischbau-Klebverbindung eines Batteriegehäuses gegenüber mechanischer und medialer Belastung unter Berücksichtigung der Interphasenstruktur</i>. Edited by DECHEMA, Gesellschaft für Chemische Technik und Biotechnologie e.V., 2022.","short":"T. Schmolke, D. Teutenberg, G. Meschut, D. Meinderink, S. Golebiowska, F. Rieker, C. Ebbert, G. Grundmeier, in: DECHEMA, Gesellschaft für Chemische Technik und Biotechnologie e.V. (Ed.), 2022.","apa":"Schmolke, T., Teutenberg, D., Meschut, G., Meinderink, D., Golebiowska, S., Rieker, F., Ebbert, C., &#38; Grundmeier, G. (2022). <i>Entwicklung einer Methode zur Bewertung einer stahlintensiven Mischbau-Klebverbindung eines Batteriegehäuses gegenüber mechanischer und medialer Belastung unter Berücksichtigung der Interphasenstruktur</i> (DECHEMA, Gesellschaft für Chemische Technik und Biotechnologie e.V., Ed.).","ama":"Schmolke T, Teutenberg D, Meschut G, et al. Entwicklung einer Methode zur Bewertung einer stahlintensiven Mischbau-Klebverbindung eines Batteriegehäuses gegenüber mechanischer und medialer Belastung unter Berücksichtigung der Interphasenstruktur. In: DECHEMA, Gesellschaft für Chemische Technik und Biotechnologie e.V., ed. ; 2022.","ieee":"T. Schmolke <i>et al.</i>, “Entwicklung einer Methode zur Bewertung einer stahlintensiven Mischbau-Klebverbindung eines Batteriegehäuses gegenüber mechanischer und medialer Belastung unter Berücksichtigung der Interphasenstruktur,” Online, 2022.","chicago":"Schmolke, Tobias, Dominik Teutenberg, Gerson Meschut, Dennis Meinderink, Sandra Golebiowska, Florian Rieker, Christoph Ebbert, and Guido Grundmeier. “Entwicklung einer Methode zur Bewertung einer stahlintensiven Mischbau-Klebverbindung eines Batteriegehäuses gegenüber mechanischer und medialer Belastung unter Berücksichtigung der Interphasenstruktur.” edited by DECHEMA, Gesellschaft für Chemische Technik und Biotechnologie e.V., 2022."},"department":[{"_id":"157"}],"author":[{"full_name":"Schmolke, Tobias","first_name":"Tobias","id":"44759","last_name":"Schmolke"},{"id":"537","last_name":"Teutenberg","first_name":"Dominik","full_name":"Teutenberg, Dominik"},{"orcid":"0000-0002-2763-1246","full_name":"Meschut, Gerson","first_name":"Gerson","last_name":"Meschut","id":"32056"},{"orcid":"0000-0002-2755-6514","first_name":"Dennis","full_name":"Meinderink, Dennis","id":"32378","last_name":"Meinderink"},{"last_name":"Golebiowska","full_name":"Golebiowska, Sandra","first_name":"Sandra"},{"full_name":"Rieker, Florian","first_name":"Florian","last_name":"Rieker"},{"full_name":"Ebbert, Christoph","first_name":"Christoph","last_name":"Ebbert","id":"7266"},{"last_name":"Grundmeier","id":"194","full_name":"Grundmeier, Guido","first_name":"Guido"}],"conference":{"start_date":"2022-02-15","location":"Online","name":"22. Kolloquium Gemeinsame Forschung in der Klebtechnik ","end_date":"2022-02-16"},"title":"Entwicklung einer Methode zur Bewertung einer stahlintensiven Mischbau-Klebverbindung eines Batteriegehäuses gegenüber mechanischer und medialer Belastung unter Berücksichtigung der Interphasenstruktur"},{"publisher":"ACM","date_created":"2022-07-01T08:14:16Z","publication":"Proceedings of the 5th International Workshop on Software-intensive Business (IWSiB'22) ","status":"public","language":[{"iso":"eng"}],"year":"2022","type":"conference","_id":"32309","date_updated":"2023-03-14T09:59:05Z","author":[{"id":"47208","last_name":"Gottschalk","first_name":"Sebastian","full_name":"Gottschalk, Sebastian"},{"orcid":"0000-0002-5967-833X","id":"8447","last_name":"Yigitbas","full_name":"Yigitbas, Enes","first_name":"Enes"},{"first_name":"Alexander","full_name":"Nowosad, Alexander","last_name":"Nowosad"},{"first_name":"Gregor","full_name":"Engels, Gregor","last_name":"Engels","id":"107"}],"title":"Towards Situation-specific Software Support for Cross-organizational Design Thinking Processes","abstract":[{"text":"Due to the increasing influences of a VUCA world, design thinking workshops have been established as a standard technique to build solutions according to uncertain customer needs. Concerning the ongoing pandemic and rising development of solutions across organizations, more and more workshops were conducted online with software support. However, existing software tools insufficiently address the different workshop situations in terms of the process (i.e., fixed tasks to conduct), the place (e.g., static online whiteboards), and people (i.e., synchronous working of all stakeholders).\r\nTherefore, we propose a design science study to develop a situation-specific software support that can be configured with flexible development processes, different places, and task-related people. Based on practical experience in existing research projects, we derive the initial design requirements and map them to a set of design principles. Out of that, we design a concept with its implementation as a software tool and point out open challenges. ","lang":"eng"}],"project":[{"name":"SFB 901: SFB 901","_id":"1"},{"name":"SFB 901 - C: SFB 901 - Project Area C","_id":"4"},{"_id":"17","name":"SFB 901 - C5: SFB 901 - Subproject C5"}],"keyword":["design thinking","situation-specific","cross-organizational","software support"],"user_id":"8447","citation":{"chicago":"Gottschalk, Sebastian, Enes Yigitbas, Alexander Nowosad, and Gregor Engels. “Towards Situation-Specific Software Support for Cross-Organizational Design Thinking Processes.” In <i>Proceedings of the 5th International Workshop on Software-Intensive Business (IWSiB’22) </i>. ACM, 2022.","ieee":"S. Gottschalk, E. Yigitbas, A. Nowosad, and G. Engels, “Towards Situation-specific Software Support for Cross-organizational Design Thinking Processes,” 2022.","apa":"Gottschalk, S., Yigitbas, E., Nowosad, A., &#38; Engels, G. (2022). Towards Situation-specific Software Support for Cross-organizational Design Thinking Processes. <i>Proceedings of the 5th International Workshop on Software-Intensive Business (IWSiB’22) </i>.","ama":"Gottschalk S, Yigitbas E, Nowosad A, Engels G. Towards Situation-specific Software Support for Cross-organizational Design Thinking Processes. In: <i>Proceedings of the 5th International Workshop on Software-Intensive Business (IWSiB’22) </i>. ACM; 2022.","short":"S. Gottschalk, E. Yigitbas, A. Nowosad, G. Engels, in: Proceedings of the 5th International Workshop on Software-Intensive Business (IWSiB’22) , ACM, 2022.","mla":"Gottschalk, Sebastian, et al. “Towards Situation-Specific Software Support for Cross-Organizational Design Thinking Processes.” <i>Proceedings of the 5th International Workshop on Software-Intensive Business (IWSiB’22) </i>, ACM, 2022.","bibtex":"@inproceedings{Gottschalk_Yigitbas_Nowosad_Engels_2022, title={Towards Situation-specific Software Support for Cross-organizational Design Thinking Processes}, booktitle={Proceedings of the 5th International Workshop on Software-intensive Business (IWSiB’22) }, publisher={ACM}, author={Gottschalk, Sebastian and Yigitbas, Enes and Nowosad, Alexander and Engels, Gregor}, year={2022} }"},"department":[{"_id":"66"},{"_id":"534"}]},{"title":"Comparative Evaluation of AR-based, VR-based, and Traditional Basic Life Support Training","author":[{"id":"8447","last_name":"Yigitbas","full_name":"Yigitbas, Enes","first_name":"Enes","orcid":"0000-0002-5967-833X"},{"first_name":"Sebastian","full_name":"Krois, Sebastian","last_name":"Krois"},{"full_name":"Renzelmann, Timo","first_name":"Timo","last_name":"Renzelmann"},{"id":"107","last_name":"Engels","first_name":"Gregor","full_name":"Engels, Gregor"}],"department":[{"_id":"66"},{"_id":"534"}],"citation":{"short":"E. Yigitbas, S. Krois, T. Renzelmann, G. Engels, in: Proceedings of the 10th International Conference on Serious Games and Applications for Health (SeGAH’22) , IEEE, 2022.","bibtex":"@inproceedings{Yigitbas_Krois_Renzelmann_Engels_2022, title={Comparative Evaluation of AR-based, VR-based, and Traditional Basic Life Support Training}, booktitle={Proceedings of the 10th International Conference on Serious Games and Applications for Health (SeGAH’22) }, publisher={IEEE}, author={Yigitbas, Enes and Krois, Sebastian and Renzelmann, Timo and Engels, Gregor}, year={2022} }","mla":"Yigitbas, Enes, et al. “Comparative Evaluation of AR-Based, VR-Based, and Traditional Basic Life Support Training.” <i>Proceedings of the 10th International Conference on Serious Games and Applications for Health (SeGAH’22) </i>, IEEE, 2022.","ieee":"E. Yigitbas, S. Krois, T. Renzelmann, and G. Engels, “Comparative Evaluation of AR-based, VR-based, and Traditional Basic Life Support Training,” 2022.","chicago":"Yigitbas, Enes, Sebastian Krois, Timo Renzelmann, and Gregor Engels. “Comparative Evaluation of AR-Based, VR-Based, and Traditional Basic Life Support Training.” In <i>Proceedings of the 10th International Conference on Serious Games and Applications for Health (SeGAH’22) </i>. IEEE, 2022.","apa":"Yigitbas, E., Krois, S., Renzelmann, T., &#38; Engels, G. (2022). Comparative Evaluation of AR-based, VR-based, and Traditional Basic Life Support Training. <i>Proceedings of the 10th International Conference on Serious Games and Applications for Health (SeGAH’22) </i>.","ama":"Yigitbas E, Krois S, Renzelmann T, Engels G. Comparative Evaluation of AR-based, VR-based, and Traditional Basic Life Support Training. In: <i>Proceedings of the 10th International Conference on Serious Games and Applications for Health (SeGAH’22) </i>. IEEE; 2022."},"user_id":"8447","language":[{"iso":"eng"}],"type":"conference","year":"2022","status":"public","date_created":"2022-07-01T08:10:18Z","publication":"Proceedings of the 10th International Conference on Serious Games and Applications for Health (SeGAH'22) ","publisher":"IEEE","date_updated":"2023-03-14T09:59:20Z","_id":"32308"},{"abstract":[{"lang":"eng","text":"Crack growth in structures depends on the cyclic loads applied on it, such as mechanical, thermal and contact, as well as residual stresses, etc. To provide an accurate simulation of crack growth in structures, it is of high importance to integrate all kinds of loading situations in the simulations. Adapcrack3D is a simulation program that can accurately predict the propagation of cracks in real structures. However, until now, this three-dimensional program has only considered mechanical loads and static thermal loads. Therefore, the features of Adapcrack3D have been extended by including contact loading in crack growth simulations. The numerical simulation of crack propagation with Adapcrack3D is generally carried out using FE models of structures provided by the user. For simulating models with contact loading situations, Adapcrack3D has been updated to work with FE models containing multiple parts and necessary features such as coupling and surface interactions. Because Adapcrack3D uses the submodel technique for fracture mechanical evaluations, the architecture of the submodel is also modified to simulate models with contact definitions between the crack surfaces. This paper discusses the newly implemented attribute of the program with the help of illustrative examples. The results confirm that the contact simulation in Adapcrack3D is a major step in improving the functionality of the program."}],"doi":"10.3390/app12157557","project":[{"name":"TRR 285: TRR 285","_id":"130","grant_number":"418701707"},{"_id":"132","name":"TRR 285 - B: TRR 285 - Project Area B"},{"name":"TRR 285 – B04: TRR 285 - Subproject B04","_id":"143"}],"title":"Further Development of 3D Crack Growth Simulation Program to Include Contact Loading Situations","keyword":["Fluid Flow and Transfer Processes","Computer Science Applications","Process Chemistry and Technology","General Engineering","Instrumentation","General Materials Science"],"user_id":"45673","type":"journal_article","quality_controlled":"1","publication":"Applied Sciences","issue":"15","article_number":"7557","volume":12,"intvolume":"        12","author":[{"first_name":"Tintu David","full_name":"Joy, Tintu David","id":"30821","last_name":"Joy"},{"first_name":"Deborah","full_name":"Weiß, Deborah","last_name":"Weiß","id":"45673"},{"first_name":"Britta","full_name":"Schramm, Britta","last_name":"Schramm","id":"4668"},{"full_name":"Kullmer, Gunter","first_name":"Gunter","id":"291","last_name":"Kullmer"}],"department":[{"_id":"143"}],"publication_status":"published","citation":{"apa":"Joy, T. D., Weiß, D., Schramm, B., &#38; Kullmer, G. (2022). Further Development of 3D Crack Growth Simulation Program to Include Contact Loading Situations. <i>Applied Sciences</i>, <i>12</i>(15), Article 7557. <a href=\"https://doi.org/10.3390/app12157557\">https://doi.org/10.3390/app12157557</a>","ama":"Joy TD, Weiß D, Schramm B, Kullmer G. Further Development of 3D Crack Growth Simulation Program to Include Contact Loading Situations. <i>Applied Sciences</i>. 2022;12(15). doi:<a href=\"https://doi.org/10.3390/app12157557\">10.3390/app12157557</a>","ieee":"T. D. Joy, D. Weiß, B. Schramm, and G. Kullmer, “Further Development of 3D Crack Growth Simulation Program to Include Contact Loading Situations,” <i>Applied Sciences</i>, vol. 12, no. 15, Art. no. 7557, 2022, doi: <a href=\"https://doi.org/10.3390/app12157557\">10.3390/app12157557</a>.","chicago":"Joy, Tintu David, Deborah Weiß, Britta Schramm, and Gunter Kullmer. “Further Development of 3D Crack Growth Simulation Program to Include Contact Loading Situations.” <i>Applied Sciences</i> 12, no. 15 (2022). <a href=\"https://doi.org/10.3390/app12157557\">https://doi.org/10.3390/app12157557</a>.","bibtex":"@article{Joy_Weiß_Schramm_Kullmer_2022, title={Further Development of 3D Crack Growth Simulation Program to Include Contact Loading Situations}, volume={12}, DOI={<a href=\"https://doi.org/10.3390/app12157557\">10.3390/app12157557</a>}, number={157557}, journal={Applied Sciences}, publisher={MDPI AG}, author={Joy, Tintu David and Weiß, Deborah and Schramm, Britta and Kullmer, Gunter}, year={2022} }","mla":"Joy, Tintu David, et al. “Further Development of 3D Crack Growth Simulation Program to Include Contact Loading Situations.” <i>Applied Sciences</i>, vol. 12, no. 15, 7557, MDPI AG, 2022, doi:<a href=\"https://doi.org/10.3390/app12157557\">10.3390/app12157557</a>.","short":"T.D. Joy, D. Weiß, B. Schramm, G. Kullmer, Applied Sciences 12 (2022)."},"status":"public","language":[{"iso":"eng"}],"publication_identifier":{"issn":["2076-3417"]},"year":"2022","publisher":"MDPI AG","date_created":"2022-12-05T21:49:48Z","date_updated":"2023-04-27T10:13:44Z","_id":"34224"},{"department":[{"_id":"157"}],"citation":{"apa":"Göddecke, J., Meschut, G., Göhrs, T., &#38; Große Gehling, M. (2022). <i>Methodenentwicklung zur Auslegung geklebter Verbindungen aus hochfestem Stahl unter Berücksichtigung betriebsrelevanter Beanspruchungen im Landmaschinen- und Anlagenbau</i> (DECHEMA, Gesellschaft für Chemische Technik und Biotechnologie e.V., Ed.).","ama":"Göddecke J, Meschut G, Göhrs T, Große Gehling M. Methodenentwicklung zur Auslegung geklebter Verbindungen aus hochfestem Stahl unter Berücksichtigung betriebsrelevanter Beanspruchungen im Landmaschinen- und Anlagenbau. In: DECHEMA, Gesellschaft für Chemische Technik und Biotechnologie e.V., ed. ; 2022.","ieee":"J. Göddecke, G. Meschut, T. Göhrs, and M. Große Gehling, “Methodenentwicklung zur Auslegung geklebter Verbindungen aus hochfestem Stahl unter Berücksichtigung betriebsrelevanter Beanspruchungen im Landmaschinen- und Anlagenbau,” Webkonferenz, 2022.","chicago":"Göddecke, Johannes, Gerson Meschut, Tim Göhrs, and Manfred Große Gehling. “Methodenentwicklung zur Auslegung geklebter Verbindungen aus hochfestem Stahl unter Berücksichtigung betriebsrelevanter Beanspruchungen im Landmaschinen- und Anlagenbau.” edited by DECHEMA, Gesellschaft für Chemische Technik und Biotechnologie e.V. Frankfurt, 2022.","bibtex":"@inproceedings{Göddecke_Meschut_Göhrs_Große Gehling_2022, place={Frankfurt}, title={Methodenentwicklung zur Auslegung geklebter Verbindungen aus hochfestem Stahl unter Berücksichtigung betriebsrelevanter Beanspruchungen im Landmaschinen- und Anlagenbau}, author={Göddecke, Johannes and Meschut, Gerson and Göhrs, Tim and Große Gehling, Manfred}, editor={DECHEMA, Gesellschaft für Chemische Technik und Biotechnologie e.V.}, year={2022} }","mla":"Göddecke, Johannes, et al. <i>Methodenentwicklung zur Auslegung geklebter Verbindungen aus hochfestem Stahl unter Berücksichtigung betriebsrelevanter Beanspruchungen im Landmaschinen- und Anlagenbau</i>. Edited by DECHEMA, Gesellschaft für Chemische Technik und Biotechnologie e.V., 2022.","short":"J. Göddecke, G. Meschut, T. Göhrs, M. Große Gehling, in: DECHEMA, Gesellschaft für Chemische Technik und Biotechnologie e.V. (Ed.), Frankfurt, 2022."},"user_id":"59070","corporate_editor":["DECHEMA, Gesellschaft für Chemische Technik und Biotechnologie e.V."],"publication_status":"published","place":"Frankfurt","conference":{"end_date":"2022-02-16","name":"22. Kolloquium gemeinsame Forschung in der Klebtechnik","start_date":"2022-02-15","location":"Webkonferenz"},"title":"Methodenentwicklung zur Auslegung geklebter Verbindungen aus hochfestem Stahl unter Berücksichtigung betriebsrelevanter Beanspruchungen im Landmaschinen- und Anlagenbau","author":[{"full_name":"Göddecke, Johannes","first_name":"Johannes","last_name":"Göddecke","id":"59070"},{"id":"32056","last_name":"Meschut","full_name":"Meschut, Gerson","first_name":"Gerson","orcid":"0000-0002-2763-1246"},{"last_name":"Göhrs","full_name":"Göhrs, Tim","first_name":"Tim"},{"first_name":"Manfred","full_name":"Große Gehling, Manfred","last_name":"Große Gehling"}],"date_updated":"2023-03-08T16:56:52Z","_id":"42874","type":"conference","year":"2022","language":[{"iso":"ger"}],"status":"public","date_created":"2023-03-08T16:46:33Z"},{"_id":"33515","date_updated":"2023-03-14T09:58:26Z","publication":"Proceedings of the Mensch Und Computer 2022 (MuC ’22) ","date_created":"2022-10-04T13:39:49Z","type":"conference","year":"2022","language":[{"iso":"eng"}],"status":"public","citation":{"mla":"Buschek, Daniel, et al. “UCAI 2022 - 3rd International Workshop on User-Centered Artificial Intelligence.” <i>Proceedings of the Mensch Und Computer 2022 (MuC ’22) </i>, 2022.","bibtex":"@inproceedings{Buschek_Hauptmann_Heuer_Loepp_Riener_Yigitbas_2022, title={UCAI 2022 - 3rd International Workshop on User-Centered Artificial Intelligence}, booktitle={Proceedings of the Mensch Und Computer 2022 (MuC ’22) }, author={Buschek, Daniel and Hauptmann, Hanna and Heuer, Hendrik and Loepp, Benedikt and Riener, Andreas  and Yigitbas, Enes}, year={2022} }","ama":"Buschek D, Hauptmann H, Heuer H, Loepp B, Riener A, Yigitbas E. UCAI 2022 - 3rd International Workshop on User-Centered Artificial Intelligence. In: <i>Proceedings of the Mensch Und Computer 2022 (MuC ’22) </i>. ; 2022.","apa":"Buschek, D., Hauptmann, H., Heuer, H., Loepp, B., Riener, A., &#38; Yigitbas, E. (2022). UCAI 2022 - 3rd International Workshop on User-Centered Artificial Intelligence. <i>Proceedings of the Mensch Und Computer 2022 (MuC ’22) </i>.","chicago":"Buschek, Daniel, Hanna Hauptmann, Hendrik Heuer, Benedikt Loepp, Andreas  Riener, and Enes Yigitbas. “UCAI 2022 - 3rd International Workshop on User-Centered Artificial Intelligence.” In <i>Proceedings of the Mensch Und Computer 2022 (MuC ’22) </i>, 2022.","short":"D. Buschek, H. Hauptmann, H. Heuer, B. Loepp, A. Riener, E. Yigitbas, in: Proceedings of the Mensch Und Computer 2022 (MuC ’22) , 2022.","ieee":"D. Buschek, H. Hauptmann, H. Heuer, B. Loepp, A. Riener, and E. Yigitbas, “UCAI 2022 - 3rd International Workshop on User-Centered Artificial Intelligence,” 2022."},"user_id":"8447","department":[{"_id":"66"},{"_id":"534"}],"title":"UCAI 2022 - 3rd International Workshop on User-Centered Artificial Intelligence","author":[{"last_name":"Buschek","full_name":"Buschek, Daniel","first_name":"Daniel"},{"last_name":"Hauptmann","full_name":"Hauptmann, Hanna","first_name":"Hanna"},{"last_name":"Heuer","first_name":"Hendrik","full_name":"Heuer, Hendrik"},{"last_name":"Loepp","first_name":"Benedikt","full_name":"Loepp, Benedikt"},{"first_name":"Andreas ","full_name":"Riener, Andreas ","last_name":"Riener"},{"id":"8447","last_name":"Yigitbas","full_name":"Yigitbas, Enes","first_name":"Enes","orcid":"0000-0002-5967-833X"}]},{"_id":"39372","date_updated":"2023-03-22T10:27:01Z","publisher":"IEEE","date_created":"2023-01-24T10:02:44Z","publication":"2022 Smart Systems Integration (SSI)","status":"public","language":[{"iso":"eng"}],"year":"2022","type":"conference","publication_status":"published","user_id":"20179","citation":{"bibtex":"@inproceedings{Lange_Hedayat_Kuhn_Hilleringmann_2022, title={Modeling and Characterization of a 3D Environment for the Design of an Inductively Based Locating Method by Coil Couplings}, DOI={<a href=\"https://doi.org/10.1109/ssi56489.2022.9901416\">10.1109/ssi56489.2022.9901416</a>}, booktitle={2022 Smart Systems Integration (SSI)}, publisher={IEEE}, author={Lange, Sven and Hedayat, Christian and Kuhn, Harald and Hilleringmann, Ulrich}, year={2022} }","mla":"Lange, Sven, et al. “Modeling and Characterization of a 3D Environment for the Design of an Inductively Based Locating Method by Coil Couplings.” <i>2022 Smart Systems Integration (SSI)</i>, IEEE, 2022, doi:<a href=\"https://doi.org/10.1109/ssi56489.2022.9901416\">10.1109/ssi56489.2022.9901416</a>.","short":"S. Lange, C. Hedayat, H. Kuhn, U. Hilleringmann, in: 2022 Smart Systems Integration (SSI), IEEE, 2022.","apa":"Lange, S., Hedayat, C., Kuhn, H., &#38; Hilleringmann, U. (2022). Modeling and Characterization of a 3D Environment for the Design of an Inductively Based Locating Method by Coil Couplings. <i>2022 Smart Systems Integration (SSI)</i>. <a href=\"https://doi.org/10.1109/ssi56489.2022.9901416\">https://doi.org/10.1109/ssi56489.2022.9901416</a>","ama":"Lange S, Hedayat C, Kuhn H, Hilleringmann U. Modeling and Characterization of a 3D Environment for the Design of an Inductively Based Locating Method by Coil Couplings. In: <i>2022 Smart Systems Integration (SSI)</i>. IEEE; 2022. doi:<a href=\"https://doi.org/10.1109/ssi56489.2022.9901416\">10.1109/ssi56489.2022.9901416</a>","ieee":"S. Lange, C. Hedayat, H. Kuhn, and U. Hilleringmann, “Modeling and Characterization of a 3D Environment for the Design of an Inductively Based Locating Method by Coil Couplings,” 2022, doi: <a href=\"https://doi.org/10.1109/ssi56489.2022.9901416\">10.1109/ssi56489.2022.9901416</a>.","chicago":"Lange, Sven, Christian Hedayat, Harald Kuhn, and Ulrich Hilleringmann. “Modeling and Characterization of a 3D Environment for the Design of an Inductively Based Locating Method by Coil Couplings.” In <i>2022 Smart Systems Integration (SSI)</i>. IEEE, 2022. <a href=\"https://doi.org/10.1109/ssi56489.2022.9901416\">https://doi.org/10.1109/ssi56489.2022.9901416</a>."},"department":[{"_id":"59"}],"author":[{"last_name":"Lange","full_name":"Lange, Sven","first_name":"Sven"},{"last_name":"Hedayat","first_name":"Christian","full_name":"Hedayat, Christian"},{"last_name":"Kuhn","first_name":"Harald","full_name":"Kuhn, Harald"},{"first_name":"Ulrich","full_name":"Hilleringmann, Ulrich","last_name":"Hilleringmann","id":"20179"}],"title":"Modeling and Characterization of a 3D Environment for the Design of an Inductively Based Locating Method by Coil Couplings","doi":"10.1109/ssi56489.2022.9901416"},{"doi":"10.1109/ssi56489.2022.9901416","author":[{"full_name":"Lange, Sven","first_name":"Sven","last_name":"Lange"},{"last_name":"Hedayat","first_name":"Christian","full_name":"Hedayat, Christian"},{"full_name":"Kuhn, Harald","first_name":"Harald","last_name":"Kuhn"},{"id":"20179","last_name":"Hilleringmann","full_name":"Hilleringmann, Ulrich","first_name":"Ulrich"}],"title":"Modeling and Characterization of a 3D Environment for the Design of an Inductively Based Locating Method by Coil Couplings","department":[{"_id":"59"}],"user_id":"20179","publication_status":"published","citation":{"apa":"Lange, S., Hedayat, C., Kuhn, H., &#38; Hilleringmann, U. (2022). Modeling and Characterization of a 3D Environment for the Design of an Inductively Based Locating Method by Coil Couplings. <i>2022 Smart Systems Integration (SSI)</i>. <a href=\"https://doi.org/10.1109/ssi56489.2022.9901416\">https://doi.org/10.1109/ssi56489.2022.9901416</a>","ama":"Lange S, Hedayat C, Kuhn H, Hilleringmann U. Modeling and Characterization of a 3D Environment for the Design of an Inductively Based Locating Method by Coil Couplings. In: <i>2022 Smart Systems Integration (SSI)</i>. IEEE; 2022. doi:<a href=\"https://doi.org/10.1109/ssi56489.2022.9901416\">10.1109/ssi56489.2022.9901416</a>","ieee":"S. Lange, C. Hedayat, H. Kuhn, and U. Hilleringmann, “Modeling and Characterization of a 3D Environment for the Design of an Inductively Based Locating Method by Coil Couplings,” 2022, doi: <a href=\"https://doi.org/10.1109/ssi56489.2022.9901416\">10.1109/ssi56489.2022.9901416</a>.","chicago":"Lange, Sven, Christian Hedayat, Harald Kuhn, and Ulrich Hilleringmann. “Modeling and Characterization of a 3D Environment for the Design of an Inductively Based Locating Method by Coil Couplings.” In <i>2022 Smart Systems Integration (SSI)</i>. IEEE, 2022. <a href=\"https://doi.org/10.1109/ssi56489.2022.9901416\">https://doi.org/10.1109/ssi56489.2022.9901416</a>.","bibtex":"@inproceedings{Lange_Hedayat_Kuhn_Hilleringmann_2022, title={Modeling and Characterization of a 3D Environment for the Design of an Inductively Based Locating Method by Coil Couplings}, DOI={<a href=\"https://doi.org/10.1109/ssi56489.2022.9901416\">10.1109/ssi56489.2022.9901416</a>}, booktitle={2022 Smart Systems Integration (SSI)}, publisher={IEEE}, author={Lange, Sven and Hedayat, Christian and Kuhn, Harald and Hilleringmann, Ulrich}, year={2022} }","mla":"Lange, Sven, et al. “Modeling and Characterization of a 3D Environment for the Design of an Inductively Based Locating Method by Coil Couplings.” <i>2022 Smart Systems Integration (SSI)</i>, IEEE, 2022, doi:<a href=\"https://doi.org/10.1109/ssi56489.2022.9901416\">10.1109/ssi56489.2022.9901416</a>.","short":"S. Lange, C. Hedayat, H. Kuhn, U. Hilleringmann, in: 2022 Smart Systems Integration (SSI), IEEE, 2022."},"status":"public","type":"conference","year":"2022","language":[{"iso":"eng"}],"publisher":"IEEE","publication":"2022 Smart Systems Integration (SSI)","date_created":"2023-01-24T10:03:39Z","date_updated":"2023-03-23T13:26:35Z","_id":"39373"},{"doi":"10.1109/ssi56489.2022.9901416","author":[{"first_name":"Sven","full_name":"Lange, Sven","last_name":"Lange"},{"last_name":"Hedayat","full_name":"Hedayat, Christian","first_name":"Christian"},{"first_name":"Harald","full_name":"Kuhn, Harald","last_name":"Kuhn"},{"last_name":"Hilleringmann","id":"20179","full_name":"Hilleringmann, Ulrich","first_name":"Ulrich"}],"title":"Modeling and Characterization of a 3D Environment for the Design of an Inductively Based Locating Method by Coil Couplings","department":[{"_id":"59"}],"user_id":"20179","publication_status":"published","citation":{"ama":"Lange S, Hedayat C, Kuhn H, Hilleringmann U. Modeling and Characterization of a 3D Environment for the Design of an Inductively Based Locating Method by Coil Couplings. In: <i>2022 Smart Systems Integration (SSI)</i>. IEEE; 2022. doi:<a href=\"https://doi.org/10.1109/ssi56489.2022.9901416\">10.1109/ssi56489.2022.9901416</a>","apa":"Lange, S., Hedayat, C., Kuhn, H., &#38; Hilleringmann, U. (2022). Modeling and Characterization of a 3D Environment for the Design of an Inductively Based Locating Method by Coil Couplings. <i>2022 Smart Systems Integration (SSI)</i>. <a href=\"https://doi.org/10.1109/ssi56489.2022.9901416\">https://doi.org/10.1109/ssi56489.2022.9901416</a>","ieee":"S. Lange, C. Hedayat, H. Kuhn, and U. Hilleringmann, “Modeling and Characterization of a 3D Environment for the Design of an Inductively Based Locating Method by Coil Couplings,” 2022, doi: <a href=\"https://doi.org/10.1109/ssi56489.2022.9901416\">10.1109/ssi56489.2022.9901416</a>.","chicago":"Lange, Sven, Christian Hedayat, Harald Kuhn, and Ulrich Hilleringmann. “Modeling and Characterization of a 3D Environment for the Design of an Inductively Based Locating Method by Coil Couplings.” In <i>2022 Smart Systems Integration (SSI)</i>. IEEE, 2022. <a href=\"https://doi.org/10.1109/ssi56489.2022.9901416\">https://doi.org/10.1109/ssi56489.2022.9901416</a>.","bibtex":"@inproceedings{Lange_Hedayat_Kuhn_Hilleringmann_2022, title={Modeling and Characterization of a 3D Environment for the Design of an Inductively Based Locating Method by Coil Couplings}, DOI={<a href=\"https://doi.org/10.1109/ssi56489.2022.9901416\">10.1109/ssi56489.2022.9901416</a>}, booktitle={2022 Smart Systems Integration (SSI)}, publisher={IEEE}, author={Lange, Sven and Hedayat, Christian and Kuhn, Harald and Hilleringmann, Ulrich}, year={2022} }","mla":"Lange, Sven, et al. “Modeling and Characterization of a 3D Environment for the Design of an Inductively Based Locating Method by Coil Couplings.” <i>2022 Smart Systems Integration (SSI)</i>, IEEE, 2022, doi:<a href=\"https://doi.org/10.1109/ssi56489.2022.9901416\">10.1109/ssi56489.2022.9901416</a>.","short":"S. Lange, C. Hedayat, H. Kuhn, U. Hilleringmann, in: 2022 Smart Systems Integration (SSI), IEEE, 2022."},"status":"public","type":"conference","year":"2022","language":[{"iso":"eng"}],"publisher":"IEEE","publication":"2022 Smart Systems Integration (SSI)","date_created":"2023-01-24T10:05:18Z","date_updated":"2023-03-23T13:27:07Z","_id":"39375"}]