---
_id: '58702'
abstract:
- lang: eng
text: Background In
basketball, changing direction is one of the primary mechanisms of anterior cruciate
ligament (ACL) injury, often occurring within complex game situations with high
cognitive demands. It is unknown how visual attention affects sidestep cutting
kinematics during the entire energy absorption phase of the cut in an ecologically
valid environment. Purpose
The purpose of this research was to study the effect of added cognitive
load, in the form of increased visual attentional demands, on sidestep cutting
kinematics during the energy absorption phase of the cut in an ecologically valid
environment. Study
Design Crossover Study
Methods Fifteen male basketball players (aged
22.1 ± 2.3) performed ten sidestep cutting movements without (BASE) and with (VIS)
a visual attention dual task. 3D kinematics of the hip, knee and ankle were recorded
utilizing Xsens IMU motion capture. Temporal kinematics were analyzed using Statistical
Parametric Mapping. Discrete time point kinematics were additionally analyzed
at initial contact (IC) and at peak knee flexion utilizing paired t-tests. Effect
sizes were calculated. Results
Hip flexion was significantly reduced in the VIS condition compared to
the BASE condition (p<0.01), including at IC (VIS 35.0° ± 7.2°, BASE 40.7°
± 4.9°, p=0.02, d=0.92) and peak (VIS 37.8° ± 9.7°, BASE 45.5° ± 6.9°, p=0.001,
d=0.90). Knee flexion was significantly reduced in the VIS condition, in comparison
to the BASE condition (p<0.01), at peak (VIS 59.9° ± 7.5°, BASE 64.1° ± 7.4°,
p=0.001, d=0.55). Conclusion
The addition of visual attention during sidestep cutting altered lower
limb kinematics, which may increase ACL injury risk. It is suggested that ACL
injury risk screening and prevention should include sidestep cutting with visual
attentional demands, in order to mimic the cognitive demands of the sports environment.
Level of Evidence
3
author:
- first_name: Koen T.H.
full_name: Rikken, Koen T.H.
last_name: Rikken
- first_name: Tom
full_name: Panneman, Tom
last_name: Panneman
- first_name: Fabian
full_name: Vercauteren, Fabian
last_name: Vercauteren
- first_name: Alli
full_name: Gokeler, Alli
last_name: Gokeler
- first_name: Anne
full_name: Benjaminse, Anne
last_name: Benjaminse
citation:
ama: Rikken KTH, Panneman T, Vercauteren F, Gokeler A, Benjaminse A. Increased Visual
Attentional Demands Alter Lower Extremity Sidestep Cutting Kinematics in Male
Basketball Players. International Journal of Sports Physical Therapy. 2024;19(11).
doi:10.26603/001c.124804
apa: Rikken, K. T. H., Panneman, T., Vercauteren, F., Gokeler, A., & Benjaminse,
A. (2024). Increased Visual Attentional Demands Alter Lower Extremity Sidestep
Cutting Kinematics in Male Basketball Players. International Journal of Sports
Physical Therapy, 19(11). https://doi.org/10.26603/001c.124804
bibtex: '@article{Rikken_Panneman_Vercauteren_Gokeler_Benjaminse_2024, title={Increased
Visual Attentional Demands Alter Lower Extremity Sidestep Cutting Kinematics in
Male Basketball Players}, volume={19}, DOI={10.26603/001c.124804},
number={11}, journal={International Journal of Sports Physical Therapy}, publisher={International
Journal of Sports Physical Therapy}, author={Rikken, Koen T.H. and Panneman, Tom
and Vercauteren, Fabian and Gokeler, Alli and Benjaminse, Anne}, year={2024} }'
chicago: Rikken, Koen T.H., Tom Panneman, Fabian Vercauteren, Alli Gokeler, and
Anne Benjaminse. “Increased Visual Attentional Demands Alter Lower Extremity Sidestep
Cutting Kinematics in Male Basketball Players.” International Journal of Sports
Physical Therapy 19, no. 11 (2024). https://doi.org/10.26603/001c.124804.
ieee: 'K. T. H. Rikken, T. Panneman, F. Vercauteren, A. Gokeler, and A. Benjaminse,
“Increased Visual Attentional Demands Alter Lower Extremity Sidestep Cutting Kinematics
in Male Basketball Players,” International Journal of Sports Physical Therapy,
vol. 19, no. 11, 2024, doi: 10.26603/001c.124804.'
mla: Rikken, Koen T. H., et al. “Increased Visual Attentional Demands Alter Lower
Extremity Sidestep Cutting Kinematics in Male Basketball Players.” International
Journal of Sports Physical Therapy, vol. 19, no. 11, International Journal
of Sports Physical Therapy, 2024, doi:10.26603/001c.124804.
short: K.T.H. Rikken, T. Panneman, F. Vercauteren, A. Gokeler, A. Benjaminse, International
Journal of Sports Physical Therapy 19 (2024).
date_created: 2025-02-18T14:51:11Z
date_updated: 2025-02-18T14:51:20Z
department:
- _id: '172'
doi: 10.26603/001c.124804
intvolume: ' 19'
issue: '11'
language:
- iso: eng
publication: International Journal of Sports Physical Therapy
publication_identifier:
issn:
- 2159-2896
publication_status: published
publisher: International Journal of Sports Physical Therapy
status: public
title: Increased Visual Attentional Demands Alter Lower Extremity Sidestep Cutting
Kinematics in Male Basketball Players
type: journal_article
user_id: '46'
volume: 19
year: '2024'
...
---
_id: '57499'
author:
- first_name: J.
full_name: Maalouly, J.
last_name: Maalouly
- first_name: D.
full_name: Hemker, D.
last_name: Hemker
- first_name: C.
full_name: Hedayat, C.
last_name: Hedayat
- first_name: M.
full_name: Olbrich, M.
last_name: Olbrich
- first_name: Sven
full_name: Lange, Sven
id: '38240'
last_name: Lange
orcid: '0009-0007-9150-2266 '
- first_name: H.
full_name: Mathis, H.
last_name: Mathis
citation:
ama: Maalouly J, Hemker D, Hedayat C, Olbrich M, Lange S, Mathis H. Using Autoencoders
to Classify EMC Problems in Electronic System Development. Advances in Radio
Science. 2024;22:53–59. doi:10.5194/ars-22-53-2024
apa: Maalouly, J., Hemker, D., Hedayat, C., Olbrich, M., Lange, S., & Mathis,
H. (2024). Using Autoencoders to Classify EMC Problems in Electronic System Development.
Advances in Radio Science, 22, 53–59. https://doi.org/10.5194/ars-22-53-2024
bibtex: '@article{Maalouly_Hemker_Hedayat_Olbrich_Lange_Mathis_2024, title={Using
Autoencoders to Classify EMC Problems in Electronic System Development}, volume={22},
DOI={10.5194/ars-22-53-2024},
journal={Advances in Radio Science}, author={Maalouly, J. and Hemker, D. and Hedayat,
C. and Olbrich, M. and Lange, Sven and Mathis, H.}, year={2024}, pages={53–59}
}'
chicago: 'Maalouly, J., D. Hemker, C. Hedayat, M. Olbrich, Sven Lange, and H. Mathis.
“Using Autoencoders to Classify EMC Problems in Electronic System Development.”
Advances in Radio Science 22 (2024): 53–59. https://doi.org/10.5194/ars-22-53-2024.'
ieee: 'J. Maalouly, D. Hemker, C. Hedayat, M. Olbrich, S. Lange, and H. Mathis,
“Using Autoencoders to Classify EMC Problems in Electronic System Development,”
Advances in Radio Science, vol. 22, pp. 53–59, 2024, doi: 10.5194/ars-22-53-2024.'
mla: Maalouly, J., et al. “Using Autoencoders to Classify EMC Problems in Electronic
System Development.” Advances in Radio Science, vol. 22, 2024, pp. 53–59,
doi:10.5194/ars-22-53-2024.
short: J. Maalouly, D. Hemker, C. Hedayat, M. Olbrich, S. Lange, H. Mathis, Advances
in Radio Science 22 (2024) 53–59.
conference:
end_date: 2023-09-28
location: Miltenberg
name: Kleinheubacher Berichte 2023
start_date: 2023-09-26
date_created: 2024-11-29T10:05:47Z
date_updated: 2025-03-17T12:13:32Z
department:
- _id: '59'
- _id: '485'
doi: 10.5194/ars-22-53-2024
intvolume: ' 22'
language:
- iso: eng
main_file_link:
- url: https://ars.copernicus.org/articles/22/53/2024/
page: 53–59
project:
- _id: '52'
name: 'PC2: Computing Resources Provided by the Paderborn Center for Parallel Computing'
publication: Advances in Radio Science
publication_status: published
status: public
title: Using Autoencoders to Classify EMC Problems in Electronic System Development
type: journal_article
user_id: '38240'
volume: 22
year: '2024'
...
---
_id: '59131'
abstract:
- lang: eng
text: 'Füllstoffe erhöhen die Wärmeleitfähigkeit von im Fused Filament Fabrication
(FFF) Verfahren hergestellten Strukturen. Neben der Füllstoffart ist dabei der
Füllstoffvolumenanteil relevant. Der maximal verarbeitbare Füllstoffanteil ist
hier gegenüber vergleichbaren Spritzgussmaterialien reduziert. An der Kunststofftechnik
Paderborn (KTP) wurde untersucht, welchen Einfluss spezifische Füllstoffe auf
die Materialeigenschaften haben. Die additive Fertigung (AM) gewinnt durch stetig
steigende Anforderungen an die Bauteilkomplexität und Fertigungsflexibilität nicht
nur im Prototypenbau an Bedeutung [1]. Eines der am weitesten verbreiteten additiven
Fertigungsverfahren ist dabei das Fused Filament Fabrication (FFF) Verfahren [2].
Bei diesem Verfahren wird ein Kunststofffilament in eine temperierte Düse gefördert,
dort aufgeschmolzen und in einer charakteristischen, näherungsweise elliptischen
Stranggeometrie ausgetragen. Durch die Verfahrbewegung der Plastifiziereinheit
und der Bauplattform können dreidimensionale Strukturen gefertigt werden [3].
Das FFF-Verfahren zeichnet sich unter anderem durch die Verarbeitung einer großen
Bandbreite an thermoplastischen Kunststoffen aus [4]. Dies ermöglicht eine anwendungsspezifische
Materialauswahl. In diesem Zusammenhang stellt auch die Modifizierung mit Füllstoffen
eine Möglichkeit dar, die Materialeigenschaften gezielt einzustellen. Die Füllstoffe
können dabei nach dem jeweiligen Aspektverhältnis in Kugeln, Plättchen oder Fasern
unterteilt werden [5]. Die Steigerung der Wärmeleitfähigkeit von im FFF-Verfahren
hergestellten Strukturen ist aktuell Stand der Forschung, gewinnt jedoch vor dem
Hintergrund der aktuellen Herausforderungen, z. B. in der Elektrotechnik, an Bedeutung
[6]. Die Kunststofftechnik Paderborn (KTP) befasst sich am Direct Manufacturing
Research Center (DMRC) – Academic derzeit mit der Entwicklung und Verarbeitung
wärmeleitfähiger Kunststoffe für das FFF-Verfahren. Der Fokus liegt dabei auf
den material- und prozessseitigen Einflüssen auf die Materialeigenschaften. Für
die Erzielung hoher Wärmeleitfähigkeiten sind dabei die Wahl der Füllstoffart
und des Füllstoffvolumenanteils hervorzuheben. Kenntnisse über die Auswirkungen
der Füllstoffzugabe und dem Zusammenspiel zwischen den mechanischen Eigenschaften
und der Wärmeleitfähigkeit sind für die anwendungsgerechte Bauteilauslegung essenziell.
Das Vorgehen Zur Analyse der Wärmeleitfähigkeit wurde eine am DMRC – Academic
entwickelte Methode verwendet. Diese basiert auf der Fertigung von zylindrischen
Probekörpern, welche im FFF-Verfahren entlang der Längsachse parallel zu den drei
Koordinatenrichtungen X, Y und Z orientiert gefertigt werden. Im Anschluss werden
die Probekörper spanend auf das für die Messung erforderliche Maß nachbearbeitet.
Dadurch können fertigungsbedingte Einflüsse auf die Geometrie und Oberflächengüte
reduziert und damit die Messgenauigkeit erhöht werden (Bild 2). Durch die Fertigung
von drei unterschiedlichen Orientierungen kann weiterhin eine resultierende Anisotropie
bewertet werden. Die auf einem Doppelschneckenextruder (Thermo Fisher Process11)
hergestellten Filamente wurden nachfolgend mit einem Gewo HTP260 (Gewo Feinmechanik)
verarbeitet. Die entsprechenden FFF-Prozessparameter sind in Tabelle 1 dargestellt.
Dabei ist anzumerken, dass eine Bauraumtemperierung im Allgemeinen und der auf
120 °C beheizte Bauraum für die Verarbeitung der betrachteten Materialien im Speziellen
zur prozesssicheren FFF-Fertigung unerlässlich sind. Die Analyse der Wärmeleitfähigkeit
erfolgte schließlich mittels der Laser-Flash-Analyse (LFA) (Netzsch LFA 467 HyperFlash)
entsprechend der DIN EN ISO 22007-4 [7]. Für die Bewertung der mechanischen Eigenschaften
wurden Probekörper entsprechend der DIN EN ISO 527-2 Typ 1BA unter Verwendung
einer Kolben-Spritzgussmaschine (Thermo Fisher Mini Jet Pro) gefertigt und mit
einer Zugprüfmaschine (Zwick/Roell ProLine Z 010) geprüft, um den grundlegenden
Füllstoffeinfluss bewerten zu können [8]. Für die Untersuchungen wurde ein Kunststoff-Compound
basierend auf Polybutylenterephthalat (PBT) ohne (PBTx) und mit (PBTxa) Verarbeitungshilfe
verwendet. Als Füllstoffe kamen zwei wärmeleitfähige plättchenförmige Füllstoffe
(Bezeichnung: F1 und F2) zur Anwendung, welche einen mittleren Partikeldurchmesser
(d50) für F1 von 5,0 µm und für F2 von 7,9 µm aufweisen. Ergebnisse der Zugversuche
Die Auswertung der mechanischen Eigenschaften zeigt den Einfluss des Füllstoffvolumenanteils
anhand des Elastizitätsmoduls und der Bruchdehnung auf (Bild 3). Die resultierende
Festigkeit wird durch die geringe Verstärkungswirkung der Plättchen hingegen nur
geringfügig beeinflusst und ist folglich nicht gesondert aufgeführt. Im Gegensatz
dazu erhöht sich die Steifigkeit mit steigendem Füllstoffvolumenanteil, was auf
den erhöhten E-Modul der Füllstoffe gegenüber der Kunststoffmatrix zurückzuführen
ist. So kann durch die Füllstoffzugabe mit einem Volumenanteil in Höhe von 22
{%} der E-Modul für das Material PBTxa-F1 gegenüber der reinen Kunststoffmatrix
um den Faktor 2,7 gesteigert werden. Hingegen nimmt die Bruchdehnung mit steigendem
Füllstoffvolumenanteil ab. Diese mit dem Volumenanteil positiv korrelierende Versprödung
stellt einen begrenzenden Faktor bei der Herstellung hochgefüllter Filamente dar.
So neigen höher gefüllte Filamente eher zu einem Bruch bei der Herstellung und
Verarbeitung. Dies resultiert in den vorliegenden maximalen Füllstoffvolumenanteilen,
welche im Vergleich zu Spritzgussmaterialien deutlich reduziert sind. Eine weitere
Erhöhung führt zu einer unzureichenden Prozessstabilität und damit zu einer unzureichenden
Verarbeitungseignung für das FFF-Verfahren. Weiterhin zeigt sich, dass der Einfluss
der verwendeten plättchenförmigen Füllstoffe für eine identische Kunststoffmatrix
vergleichbar ist. Durch die Verwendung von Verarbeitungshilfen können die mechanischen
Eigenschaften allerdings beeinflusst werden. Die Erhöhung des E-Moduls und der
Bruchdehnung ist dabei auf die verbesserte Benetzung der Füllstoffpartikel und
damit eine verbesserte Kunststoff-Füllstoff-Interaktion zurückzuführen. Bewertung
der Wärmeleitfähigkeit Zur Darstellung der Ergebnisse der Wärmeleitfähigkeit wurden
die Messergebnisse von je vier Probekörpern über die Prüftemperaturen zwischen
30 °C und 180 °C in 30 °C Inkrementen gemittelt (Bild 4). Die Ergebnisse zeigen
eine positive Korrelation zwischen einem zunehmenden Füllstoffvolumenanteil und
der Wärmeleitfähigkeit. Diese Steigerung ist wiederum abhängig von der jeweilig
verwendeten Füllstoffart. Hierbei liefert das Material PBTx-F2-X eine vergleichbare
Wärmeleitfähigkeit wie die Materialien PBTx-F1 und PBTxa-F1 in der jeweiligen
Y-Orientierung. Die Unterschiede zwischen den beiden Materialien PBTx-F1 und PBTxa-F1
sind hingegen minimal und der Einfluss der Verarbeitungshilfe auf die Wärmeleitfähigkeit
dementsprechend als vernachlässigbar anzusehen. Weiterhin ist eine anisotrope
Wärmeleitfähigkeit für die mit Plättchen gefüllten Kunststoffe ersichtlich. Während
die X-Orientierung (entlang der abgelegten Stränge) eine erhöhte Wärmeleitfähigkeit
für alle Materialien liefert, ist diese für die Z-Orientierung (zwischen den Schichten)
am geringsten. Gründe hierfür sind der Strangverbund sowie die Füllstofforientierung
innerhalb der abgelegten Stränge. Dabei ist die aufgezeigte Anisotropie für den
Füllstoff F2 im Vergleich zu F1 leicht reduziert und bestätigt den spezifischen
Einfluss der Füllstoffart. Auf Basis der Ergebnisse können allgemein drei charakteristische
Orientierungen zur Bewertung der Wärmeleitfähigkeit erfasst werden. Für die Bauteilauslegung
ist der aufgezeigte Einfluss plättchenförmiger Füllstoffe auf die sich einstellende
Anisotropie von im FFF-Verfahren gefertigten Strukturen zwingend zu beachten.
Ausblick Die angeführten Untersuchungen zeigen, dass die Verwendung von plättchenförmigen
Füllstoffen in Abhängigkeit von dem Füllstoffvolumenanteil zu einer Beeinflussung
der Materialeigenschaften führt. Die dargelegten Ergebnisse stellen in diesem
Kontext eine Grundlage zur Bewertung des Zusammenhangs zwischen den mechanischen
Eigenschaften und der Wärmeleitfähigkeit dar. Insbesondere die Limitierung des
Füllstoffvolumenanteils durch die erhöhte Versprödung ist hierbei anzuführen.
Aktuelle Untersuchungen an der Kunststofftechnik Paderborn befassen sich mit der
Betrachtung weiterer material- und prozessseitiger Einflussgrößen auf die Wärmeleitfähigkeit.
Die generierten Daten sollen schließlich für die Entwicklung eines Modells zur
Vorhersage der Wärmeleitfähigkeit von im FFF-Verfahren gefertigten Strukturen
zusammengeführt werden.'
author:
- first_name: Elmar
full_name: Moritzer, Elmar
id: '20531'
last_name: Moritzer
- first_name: Christian Lennart
full_name: Elsner, Christian Lennart
id: '70729'
last_name: Elsner
- first_name: Maximilian Karl Franz
full_name: Salm, Maximilian Karl Franz
id: '57929'
last_name: Salm
citation:
ama: Moritzer E, Elsner CL, Salm MKF. Wie der Füllstoffvolumenanteil die Materialeigenschaften
beeinflusst. Plastverarbeiter. 2024;2024.
apa: Moritzer, E., Elsner, C. L., & Salm, M. K. F. (2024). Wie der Füllstoffvolumenanteil
die Materialeigenschaften beeinflusst. Plastverarbeiter, 2024.
bibtex: '@article{Moritzer_Elsner_Salm_2024, title={Wie der Füllstoffvolumenanteil
die Materialeigenschaften beeinflusst}, volume={2024}, journal={Plastverarbeiter},
author={Moritzer, Elmar and Elsner, Christian Lennart and Salm, Maximilian Karl
Franz}, year={2024} }'
chicago: Moritzer, Elmar, Christian Lennart Elsner, and Maximilian Karl Franz Salm.
“Wie Der Füllstoffvolumenanteil Die Materialeigenschaften Beeinflusst.” Plastverarbeiter
2024 (2024).
ieee: E. Moritzer, C. L. Elsner, and M. K. F. Salm, “Wie der Füllstoffvolumenanteil
die Materialeigenschaften beeinflusst,” Plastverarbeiter, vol. 2024, 2024.
mla: Moritzer, Elmar, et al. “Wie Der Füllstoffvolumenanteil Die Materialeigenschaften
Beeinflusst.” Plastverarbeiter, vol. 2024, 2024.
short: E. Moritzer, C.L. Elsner, M.K.F. Salm, Plastverarbeiter 2024 (2024).
date_created: 2025-03-25T10:18:06Z
date_updated: 2025-03-27T10:56:02Z
department:
- _id: '9'
- _id: '321'
- _id: '624'
- _id: '367'
intvolume: ' 2024'
keyword:
- Compoundieren
- Fused Filament Fabrication
language:
- iso: eng
publication: Plastverarbeiter
status: public
title: Wie der Füllstoffvolumenanteil die Materialeigenschaften beeinflusst
type: journal_article
user_id: '59363'
volume: 2024
year: '2024'
...
---
_id: '59135'
abstract:
- lang: eng
text: Compounding is an important step in processing base polymers and is used to
incorporate various additives into a polymer. For this purpose, different screw
elements are used for dispersive and distributive mixing on a co-rotating twin-screw
extruder. Optimising the screw configuration requires precise knowledge of the
screw elements’ mixing properties, which have not been thoroughly investigated.
This study analyses the mixing behaviour of individual screw elements regarding
dispersive and distributive mixing using 3D CFD flow simulations with subsequent
particle tracking. For distributive mixing, the particle distribution behind the
screw elements in the XY plane is analysed and the mixing index MQ, which relates
the standard deviation and the mean value of the triangular areas between the
particles, is calculated. For dispersive mixing, the maximum shear stress on the
particle path and the integral of the shear stress over the residence time of
each individual particle are determined. The results show that screw element geometry
and rotation speed have a significant influence on dispersive and distributive
mixing. In addition, better dispersive mixing is achievable with highly viscous
materials. These findings enable the optimisation of the mixing zone of a co-rotating
twin-screw extruder for the efficient mixing of mineral fillers.
author:
- first_name: Jan Philipp
full_name: Oldemeier, Jan Philipp
id: '56781'
last_name: Oldemeier
- first_name: Volker
full_name: Schöppner, Volker
id: '20530'
last_name: Schöppner
citation:
ama: Oldemeier JP, Schöppner V. Analysis of the Dispersive and Distributive Mixing
Effect of Screw Elements on the Co-Rotating Twin-Screw Extruder with Particle
Tracking. Polymers. 2024;16(21). doi:10.3390/polym16212952
apa: Oldemeier, J. P., & Schöppner, V. (2024). Analysis of the Dispersive and
Distributive Mixing Effect of Screw Elements on the Co-Rotating Twin-Screw Extruder
with Particle Tracking. Polymers, 16(21). https://doi.org/10.3390/polym16212952
bibtex: '@article{Oldemeier_Schöppner_2024, title={Analysis of the Dispersive and
Distributive Mixing Effect of Screw Elements on the Co-Rotating Twin-Screw Extruder
with Particle Tracking}, volume={16}, DOI={10.3390/polym16212952},
number={21}, journal={Polymers}, author={Oldemeier, Jan Philipp and Schöppner,
Volker}, year={2024} }'
chicago: Oldemeier, Jan Philipp, and Volker Schöppner. “Analysis of the Dispersive
and Distributive Mixing Effect of Screw Elements on the Co-Rotating Twin-Screw
Extruder with Particle Tracking.” Polymers 16, no. 21 (2024). https://doi.org/10.3390/polym16212952.
ieee: 'J. P. Oldemeier and V. Schöppner, “Analysis of the Dispersive and Distributive
Mixing Effect of Screw Elements on the Co-Rotating Twin-Screw Extruder with Particle
Tracking,” Polymers, vol. 16, no. 21, 2024, doi: 10.3390/polym16212952.'
mla: Oldemeier, Jan Philipp, and Volker Schöppner. “Analysis of the Dispersive and
Distributive Mixing Effect of Screw Elements on the Co-Rotating Twin-Screw Extruder
with Particle Tracking.” Polymers, vol. 16, no. 21, 2024, doi:10.3390/polym16212952.
short: J.P. Oldemeier, V. Schöppner, Polymers 16 (2024).
date_created: 2025-03-25T10:19:50Z
date_updated: 2025-03-27T12:56:35Z
department:
- _id: '9'
- _id: '321'
- _id: '367'
doi: 10.3390/polym16212952
intvolume: ' 16'
issue: '21'
keyword:
- Compoundieren
- disperses Mischen
- distributives Mischen
- Schneckenelemente
language:
- iso: eng
publication: Polymers
quality_controlled: '1'
status: public
title: Analysis of the Dispersive and Distributive Mixing Effect of Screw Elements
on the Co-Rotating Twin-Screw Extruder with Particle Tracking
type: journal_article
user_id: '59363'
volume: 16
year: '2024'
...
---
_id: '59269'
abstract:
- lang: eng
text: Ferroelectric materials play a crucial role in a broad range of technologies
due to their unique properties that are deeply connected to the pattern and behavior
of their ferroelectric (FE) domains. Chief among them, barium titanate (BaTiO3;
BTO) sees widespread applications such as in electronics but equally is a ferroelectric
model system for fundamental research, e.g., to study the interplay of such FE
domains, the domain walls (DWs), and their macroscopic properties, owed to BTO’s
multiple and experimentally accessible phase transitions. Here, we employ Second
Harmonic Generation Microscopy (SHGM) to in situ investigate the cubic-to-tetragonal
(at ∼126°C) and the tetragonal-to-orthorhombic (at ∼5°C) phase transition in single-crystalline
BTO via three-dimensional (3D) DW mapping. We demonstrate that SHGM imaging provides
the direct visualization of FE domain switching as well as the domain dynamics
in 3D, shedding light on the interplay of the domain structure and phase transition.
These results allow us to extract the different transition temperatures locally,
to unveil the hysteresis behavior, and to determine the type of phase transition
at play (first/second order) from the recorded SHGM data. The capabilities of
SHGM in uncovering these crucial phenomena can easily be applied to other ferroelectrics
to provide new possibilities for in situ engineering of advanced ferroic devices.
article_number: '154102'
article_type: original
author:
- first_name: Benjamin
full_name: Kirbus, Benjamin
last_name: Kirbus
- first_name: Samuel D.
full_name: Seddon, Samuel D.
last_name: Seddon
- first_name: Iuliia
full_name: Kiseleva, Iuliia
last_name: Kiseleva
- first_name: Elke
full_name: Beyreuther, Elke
last_name: Beyreuther
- first_name: Michael
full_name: Rüsing, Michael
id: '22501'
last_name: Rüsing
orcid: 0000-0003-4682-4577
- first_name: Lukas M.
full_name: Eng, Lukas M.
last_name: Eng
citation:
ama: Kirbus B, Seddon SD, Kiseleva I, Beyreuther E, Rüsing M, Eng LM. Probing ferroelectric
phase transitions in barium titanate single crystals via in-situ second harmonic
generation microscopy. Journal of Applied Physics. 2024;136(15). doi:10.1063/5.0237769
apa: Kirbus, B., Seddon, S. D., Kiseleva, I., Beyreuther, E., Rüsing, M., &
Eng, L. M. (2024). Probing ferroelectric phase transitions in barium titanate
single crystals via in-situ second harmonic generation microscopy. Journal
of Applied Physics, 136(15), Article 154102. https://doi.org/10.1063/5.0237769
bibtex: '@article{Kirbus_Seddon_Kiseleva_Beyreuther_Rüsing_Eng_2024, title={Probing
ferroelectric phase transitions in barium titanate single crystals via in-situ
second harmonic generation microscopy}, volume={136}, DOI={10.1063/5.0237769},
number={15154102}, journal={Journal of Applied Physics}, publisher={AIP Publishing},
author={Kirbus, Benjamin and Seddon, Samuel D. and Kiseleva, Iuliia and Beyreuther,
Elke and Rüsing, Michael and Eng, Lukas M.}, year={2024} }'
chicago: Kirbus, Benjamin, Samuel D. Seddon, Iuliia Kiseleva, Elke Beyreuther, Michael
Rüsing, and Lukas M. Eng. “Probing Ferroelectric Phase Transitions in Barium Titanate
Single Crystals via In-Situ Second Harmonic Generation Microscopy.” Journal
of Applied Physics 136, no. 15 (2024). https://doi.org/10.1063/5.0237769.
ieee: 'B. Kirbus, S. D. Seddon, I. Kiseleva, E. Beyreuther, M. Rüsing, and L. M.
Eng, “Probing ferroelectric phase transitions in barium titanate single crystals
via in-situ second harmonic generation microscopy,” Journal of Applied Physics,
vol. 136, no. 15, Art. no. 154102, 2024, doi: 10.1063/5.0237769.'
mla: Kirbus, Benjamin, et al. “Probing Ferroelectric Phase Transitions in Barium
Titanate Single Crystals via In-Situ Second Harmonic Generation Microscopy.” Journal
of Applied Physics, vol. 136, no. 15, 154102, AIP Publishing, 2024, doi:10.1063/5.0237769.
short: B. Kirbus, S.D. Seddon, I. Kiseleva, E. Beyreuther, M. Rüsing, L.M. Eng,
Journal of Applied Physics 136 (2024).
date_created: 2025-04-02T15:57:11Z
date_updated: 2025-04-02T15:59:55Z
department:
- _id: '15'
- _id: '623'
- _id: '288'
doi: 10.1063/5.0237769
intvolume: ' 136'
issue: '15'
language:
- iso: eng
main_file_link:
- open_access: '1'
url: ' https://doi.org/10.1063/5.0237769'
oa: '1'
publication: Journal of Applied Physics
publication_identifier:
issn:
- 0021-8979
- 1089-7550
publication_status: published
publisher: AIP Publishing
quality_controlled: '1'
status: public
title: Probing ferroelectric phase transitions in barium titanate single crystals
via in-situ second harmonic generation microscopy
type: journal_article
user_id: '22501'
volume: 136
year: '2024'
...
---
_id: '59273'
abstract:
- lang: eng
text: Ferroelectric domain walls (DWs) are promising structures for assembling future
nano-electronic circuit elements on a larger scale since reporting domain wall
currents of up to 1 mA per single DW. One key requirement hereto is their reproducible
manufacturing by gaining preparative control over domain size and domain wall
conductivity (DWC). To date, most works on DWC have focused on exploring the fundamental
electrical properties of individual DWs within single-shot experiments, with an
emphasis on quantifying the origins of DWC. Very few reports exist when it comes
to comparing the DWC properties between two separate DWs, and literally nothing
exists where issues of reproducibility in DWC devices have been addressed. To
fill this gap while facing the challenge of finding guidelines for achieving predictable
DWC performance, we report on a procedure that allows us to reproducibly prepare
single hexagonal domains of a predefined diameter into uniaxial ferroelectric
lithium niobate single crystals of 200 and 300 μm thickness, respectively. We
show that the domain diameter can be controlled with an uncertainty of a few percent.
As-grown DWs are then subjected to a standard procedure of current-limited high-voltage
DWC enhancement, and they repetitively reach a DWC increase of six orders of magnitude.
While all resulting DWs show significantly enhanced DWC values, their individual
current–voltage (I–V) characteristics exhibit different shapes, which can be explained
by variations in their 3D real structure reflecting local heterogeneities by defects,
DW pinning, and surface-near DW inclination.
article_type: original
author:
- first_name: Julius
full_name: Ratzenberger, Julius
last_name: Ratzenberger
- first_name: Iuliia
full_name: Kiseleva, Iuliia
last_name: Kiseleva
- first_name: Boris
full_name: Koppitz, Boris
last_name: Koppitz
- first_name: Elke
full_name: Beyreuther, Elke
last_name: Beyreuther
- first_name: Manuel
full_name: Zahn, Manuel
last_name: Zahn
- first_name: Joshua
full_name: Gössel, Joshua
last_name: Gössel
- first_name: Peter A.
full_name: Hegarty, Peter A.
last_name: Hegarty
- first_name: Zeeshan H.
full_name: Amber, Zeeshan H.
last_name: Amber
- first_name: Michael
full_name: Rüsing, Michael
id: '22501'
last_name: Rüsing
orcid: 0000-0003-4682-4577
- first_name: Lukas M.
full_name: Eng, Lukas M.
last_name: Eng
citation:
ama: Ratzenberger J, Kiseleva I, Koppitz B, et al. Toward the reproducible fabrication
of conductive ferroelectric domain walls into lithium niobate bulk single crystals.
Journal of Applied Physics. 2024;136(10):104302. doi:10.1063/5.0219300
apa: Ratzenberger, J., Kiseleva, I., Koppitz, B., Beyreuther, E., Zahn, M., Gössel,
J., Hegarty, P. A., Amber, Z. H., Rüsing, M., & Eng, L. M. (2024). Toward
the reproducible fabrication of conductive ferroelectric domain walls into lithium
niobate bulk single crystals. Journal of Applied Physics, 136(10),
104302. https://doi.org/10.1063/5.0219300
bibtex: '@article{Ratzenberger_Kiseleva_Koppitz_Beyreuther_Zahn_Gössel_Hegarty_Amber_Rüsing_Eng_2024,
title={Toward the reproducible fabrication of conductive ferroelectric domain
walls into lithium niobate bulk single crystals}, volume={136}, DOI={10.1063/5.0219300},
number={10}, journal={Journal of Applied Physics}, publisher={AIP Publishing},
author={Ratzenberger, Julius and Kiseleva, Iuliia and Koppitz, Boris and Beyreuther,
Elke and Zahn, Manuel and Gössel, Joshua and Hegarty, Peter A. and Amber, Zeeshan
H. and Rüsing, Michael and Eng, Lukas M.}, year={2024}, pages={104302} }'
chicago: 'Ratzenberger, Julius, Iuliia Kiseleva, Boris Koppitz, Elke Beyreuther,
Manuel Zahn, Joshua Gössel, Peter A. Hegarty, Zeeshan H. Amber, Michael Rüsing,
and Lukas M. Eng. “Toward the Reproducible Fabrication of Conductive Ferroelectric
Domain Walls into Lithium Niobate Bulk Single Crystals.” Journal of Applied
Physics 136, no. 10 (2024): 104302. https://doi.org/10.1063/5.0219300.'
ieee: 'J. Ratzenberger et al., “Toward the reproducible fabrication of conductive
ferroelectric domain walls into lithium niobate bulk single crystals,” Journal
of Applied Physics, vol. 136, no. 10, p. 104302, 2024, doi: 10.1063/5.0219300.'
mla: Ratzenberger, Julius, et al. “Toward the Reproducible Fabrication of Conductive
Ferroelectric Domain Walls into Lithium Niobate Bulk Single Crystals.” Journal
of Applied Physics, vol. 136, no. 10, AIP Publishing, 2024, p. 104302, doi:10.1063/5.0219300.
short: J. Ratzenberger, I. Kiseleva, B. Koppitz, E. Beyreuther, M. Zahn, J. Gössel,
P.A. Hegarty, Z.H. Amber, M. Rüsing, L.M. Eng, Journal of Applied Physics 136
(2024) 104302.
date_created: 2025-04-02T16:12:29Z
date_updated: 2025-04-02T16:14:31Z
department:
- _id: '288'
- _id: '15'
- _id: '623'
doi: 10.1063/5.0219300
intvolume: ' 136'
issue: '10'
language:
- iso: eng
main_file_link:
- open_access: '1'
url: ' https://doi.org/10.1063/5.0219300'
oa: '1'
page: '104302'
publication: Journal of Applied Physics
publication_identifier:
issn:
- 0021-8979
- 1089-7550
publication_status: published
publisher: AIP Publishing
quality_controlled: '1'
status: public
title: Toward the reproducible fabrication of conductive ferroelectric domain walls
into lithium niobate bulk single crystals
type: journal_article
user_id: '22501'
volume: 136
year: '2024'
...
---
_id: '54966'
abstract:
- lang: eng
text: Piezoresponse force microscopy (PFM) is one of the most widespread methods
for investigating and visualizing ferroelectric domain structures down to the
nanometer length scale. PFM makes use of the direct coupling of the piezoelectric
response to the crystal lattice, and hence, it is most often applied to spatially
map the three-dimensional (3D) near-surface domain distribution of any polar or
ferroic sample. Nonetheless, since most samples investigated by PFM are at least
semiconducting or fully insulating, the electric ac field emerging from the conductive
scanning force microscopy (SFM) tip penetrates the sample and, hence, may also
couple to polar features that are deeply buried into the bulk of the sample under
investigation. Thus, in the work presented here, we experimentally and theoretically
explore the contrast and depth resolution capabilities of PFM, by analyzing the
dependence of several key parameters. These key parameters include the depth of
the buried feature, i.e., here a domain wall (DW), as well as PFM-relevant technical
parameters such as the tip radius, the PFM drive voltage and frequency, and the
signal-to-noise ratio. The theoretical predictions are experimentally verified
using x-cut periodically poled lithium niobate single crystals that are specially
prepared into wedge-shaped samples, in order to allow the buried feature, here
the DW, to be “positioned” at any depth into the bulk. This inspection essentially
contributes to the fundamental understanding in PFM contrast analysis and to the
reconstruction of 3D domain structures down to a 1 μm-penetration depth into the
sample.
article_type: original
author:
- first_name: Matthias
full_name: Roeper, Matthias
last_name: Roeper
- first_name: Samuel D.
full_name: Seddon, Samuel D.
last_name: Seddon
- first_name: Zeeshan H.
full_name: Amber, Zeeshan H.
last_name: Amber
- first_name: Michael
full_name: Rüsing, Michael
id: '22501'
last_name: Rüsing
orcid: 0000-0003-4682-4577
- first_name: Lukas M.
full_name: Eng, Lukas M.
last_name: Eng
citation:
ama: Roeper M, Seddon SD, Amber ZH, Rüsing M, Eng LM. Depth resolution in piezoresponse
force microscopy. Journal of Applied Physics. 2024;135(22). doi:10.1063/5.0206784
apa: Roeper, M., Seddon, S. D., Amber, Z. H., Rüsing, M., & Eng, L. M. (2024).
Depth resolution in piezoresponse force microscopy. Journal of Applied Physics,
135(22). https://doi.org/10.1063/5.0206784
bibtex: '@article{Roeper_Seddon_Amber_Rüsing_Eng_2024, title={Depth resolution in
piezoresponse force microscopy}, volume={135}, DOI={10.1063/5.0206784},
number={22}, journal={Journal of Applied Physics}, publisher={AIP Publishing},
author={Roeper, Matthias and Seddon, Samuel D. and Amber, Zeeshan H. and Rüsing,
Michael and Eng, Lukas M.}, year={2024} }'
chicago: Roeper, Matthias, Samuel D. Seddon, Zeeshan H. Amber, Michael Rüsing, and
Lukas M. Eng. “Depth Resolution in Piezoresponse Force Microscopy.” Journal
of Applied Physics 135, no. 22 (2024). https://doi.org/10.1063/5.0206784.
ieee: 'M. Roeper, S. D. Seddon, Z. H. Amber, M. Rüsing, and L. M. Eng, “Depth resolution
in piezoresponse force microscopy,” Journal of Applied Physics, vol. 135,
no. 22, 2024, doi: 10.1063/5.0206784.'
mla: Roeper, Matthias, et al. “Depth Resolution in Piezoresponse Force Microscopy.”
Journal of Applied Physics, vol. 135, no. 22, AIP Publishing, 2024, doi:10.1063/5.0206784.
short: M. Roeper, S.D. Seddon, Z.H. Amber, M. Rüsing, L.M. Eng, Journal of Applied
Physics 135 (2024).
date_created: 2024-07-01T21:00:43Z
date_updated: 2025-04-03T12:35:34Z
department:
- _id: '15'
- _id: '169'
- _id: '288'
- _id: '623'
doi: 10.1063/5.0206784
intvolume: ' 135'
issue: '22'
keyword:
- Ferroelectrics
- lithium niobate
- piezoresponse force microscopy
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://doi.org/10.1063/5.0206784
oa: '1'
publication: Journal of Applied Physics
publication_identifier:
issn:
- 0021-8979
- 1089-7550
publication_status: published
publisher: AIP Publishing
quality_controlled: '1'
status: public
title: Depth resolution in piezoresponse force microscopy
type: journal_article
user_id: '22501'
volume: 135
year: '2024'
...
---
_id: '60413'
author:
- first_name: David
full_name: Bartlitz, David
id: '104560'
last_name: Bartlitz
orcid: '0000-0003-2967-8299 '
citation:
ama: Bartlitz D. Keine negativen Zinsen bei Berechnung der Vorfälligkeitsentschädigung.
Anmerkung zu OLG Nürnberg, Urt. v. 25. 7. 2023 - 14 U 2764/22. Zeitschrift
für Wirtschaftsrecht (ZIP). 2024;(12):616-617.
apa: Bartlitz, D. (2024). Keine negativen Zinsen bei Berechnung der Vorfälligkeitsentschädigung.
Anmerkung zu OLG Nürnberg, Urt. v. 25. 7. 2023 - 14 U 2764/22. Zeitschrift
für Wirtschaftsrecht (ZIP), 12, 616–617.
bibtex: '@article{Bartlitz_2024, title={Keine negativen Zinsen bei Berechnung der
Vorfälligkeitsentschädigung. Anmerkung zu OLG Nürnberg, Urt. v. 25. 7. 2023 -
14 U 2764/22}, number={12}, journal={Zeitschrift für Wirtschaftsrecht (ZIP)},
author={Bartlitz, David}, year={2024}, pages={616–617} }'
chicago: 'Bartlitz, David. “Keine negativen Zinsen bei Berechnung der Vorfälligkeitsentschädigung.
Anmerkung zu OLG Nürnberg, Urt. v. 25. 7. 2023 - 14 U 2764/22.” Zeitschrift
für Wirtschaftsrecht (ZIP), no. 12 (2024): 616–17.'
ieee: D. Bartlitz, “Keine negativen Zinsen bei Berechnung der Vorfälligkeitsentschädigung.
Anmerkung zu OLG Nürnberg, Urt. v. 25. 7. 2023 - 14 U 2764/22,” Zeitschrift
für Wirtschaftsrecht (ZIP), no. 12, pp. 616–617, 2024.
mla: Bartlitz, David. “Keine negativen Zinsen bei Berechnung der Vorfälligkeitsentschädigung.
Anmerkung zu OLG Nürnberg, Urt. v. 25. 7. 2023 - 14 U 2764/22.” Zeitschrift
für Wirtschaftsrecht (ZIP), no. 12, 2024, pp. 616–17.
short: D. Bartlitz, Zeitschrift für Wirtschaftsrecht (ZIP) (2024) 616–617.
date_created: 2025-06-26T09:42:09Z
date_updated: 2025-06-26T09:43:51Z
department:
- _id: '845'
issue: '12'
language:
- iso: ger
main_file_link:
- url: https://www.juris.de/perma?d=jzs-ZIP-2024-12-004-616
page: 616-617
publication: Zeitschrift für Wirtschaftsrecht (ZIP)
publication_status: published
status: public
title: Keine negativen Zinsen bei Berechnung der Vorfälligkeitsentschädigung. Anmerkung
zu OLG Nürnberg, Urt. v. 25. 7. 2023 - 14 U 2764/22
type: journal_article
user_id: '95606'
year: '2024'
...
---
_id: '60418'
abstract:
- lang: eng
text: 'Das Themenheft präsentiert forschende und strategische Perspektiven auf eine
postdigitale Hochschullehre. Die COVID-19-Pandemie führte zu einer grundlegenden
Umgestaltung der Hochschullehre und wirkte als Katalysator für die Gestaltung
digital unterstützender Innovationen in der Hochschullehre. Unter dem Schlagwort
postdigiale Hochschullehre beschäftigten sich die vorliegenden Beiträge der dghd-Tagung
2022 mit diesem veränderten Lehren und Lernen. '
citation:
ama: Neiske I, Trier U, Osthushenrich J, Weber T, eds. Transformationen. Forschende
Und Strategische Perspektiven Auf Eine Postdigitale Hochschullehre. Vol 10.;
2024. doi:10.3278/HSLT2402W
apa: Transformationen. Forschende und strategische Perspektiven auf eine postdigitale
Hochschullehre. (2024). In I. Neiske, U. Trier, J. Osthushenrich, & T. Weber
(Eds.), die hochschullehre (Vol. 10). https://doi.org/10.3278/HSLT2402W
bibtex: '@book{Neiske_Trier_Osthushenrich_Weber_2024, title={Transformationen. Forschende
und strategische Perspektiven auf eine postdigitale Hochschullehre}, volume={10},
DOI={10.3278/HSLT2402W}, journal={die
hochschullehre}, year={2024} }'
chicago: Neiske, Iris, Ulrike Trier, Judith Osthushenrich, and Tassja Weber, eds.
Transformationen. Forschende Und Strategische Perspektiven Auf Eine Postdigitale
Hochschullehre. Die Hochschullehre. Vol. 10, 2024. https://doi.org/10.3278/HSLT2402W.
ieee: I. Neiske, U. Trier, J. Osthushenrich, and T. Weber, Eds., Transformationen.
Forschende und strategische Perspektiven auf eine postdigitale Hochschullehre,
vol. 10. 2024.
mla: Neiske, Iris, et al., editors. “Transformationen. Forschende Und Strategische
Perspektiven Auf Eine Postdigitale Hochschullehre.” Die Hochschullehre,
vol. 10, 2024, doi:10.3278/HSLT2402W.
short: I. Neiske, U. Trier, J. Osthushenrich, T. Weber, eds., Transformationen.
Forschende Und Strategische Perspektiven Auf Eine Postdigitale Hochschullehre,
2024.
conference:
name: ' 22. Jahrestagung der Deutschen Gesellschaft für Hochschuldidaktik'
date_created: 2025-06-26T10:47:32Z
date_updated: 2025-06-26T10:55:38Z
doi: 10.3278/HSLT2402W
editor:
- first_name: Iris
full_name: Neiske, Iris
id: '53827'
last_name: Neiske
- first_name: Ulrike
full_name: Trier, Ulrike
id: '82117'
last_name: Trier
- first_name: Judith
full_name: Osthushenrich, Judith
id: '12360'
last_name: Osthushenrich
- first_name: Tassja
full_name: Weber, Tassja
id: '89571'
last_name: Weber
intvolume: ' 10'
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.wbv.de/shop/Transformationen.-Forschende-und-strategische-Perspektiven-auf-eine-postdigitale-Hochschullehre-HSLT2402W
oa: '1'
publication: die hochschullehre
status: public
title: Transformationen. Forschende und strategische Perspektiven auf eine postdigitale
Hochschullehre
type: journal_editor
user_id: '12360'
volume: 10
year: '2024'
...
---
_id: '60314'
abstract:
- lang: eng
text: A method for the construction of bijective volumetric maps between
3D shapes is presented. Arbitrary shapes of ball-topology are supported, overcoming
restrictions of previous methods to convex or star-shaped targets. In essence,
the mapping problem is decomposed into a set of simpler mapping problems, each
of which can be solved with previous methods for discrete star-shaped mapping
problems. Addressing the key challenges in this endeavor, algorithms are described
to reliably construct structurally compatible partitions of two shapes with constraints
regarding star-shapedness and to compute a parsimonious common refinement of two
triangulations.
author:
- first_name: Steffen
full_name: Hinderink, Steffen
id: '116615'
last_name: Hinderink
- first_name: Hendrik
full_name: Brückler, Hendrik
id: '115694'
last_name: Brückler
- first_name: Marcel
full_name: Campen, Marcel
id: '114904'
last_name: Campen
orcid: 0000-0003-2340-3462
citation:
ama: Hinderink S, Brückler H, Campen M. Bijective Volumetric Mapping via Star Decomposition.
ACM Transactions on Graphics. 2024;43(6):1-11. doi:10.1145/3687950
apa: Hinderink, S., Brückler, H., & Campen, M. (2024). Bijective Volumetric
Mapping via Star Decomposition. ACM Transactions on Graphics, 43(6),
1–11. https://doi.org/10.1145/3687950
bibtex: '@article{Hinderink_Brückler_Campen_2024, title={Bijective Volumetric Mapping
via Star Decomposition}, volume={43}, DOI={10.1145/3687950},
number={6}, journal={ACM Transactions on Graphics}, publisher={Association for
Computing Machinery (ACM)}, author={Hinderink, Steffen and Brückler, Hendrik and
Campen, Marcel}, year={2024}, pages={1–11} }'
chicago: 'Hinderink, Steffen, Hendrik Brückler, and Marcel Campen. “Bijective Volumetric
Mapping via Star Decomposition.” ACM Transactions on Graphics 43, no. 6
(2024): 1–11. https://doi.org/10.1145/3687950.'
ieee: 'S. Hinderink, H. Brückler, and M. Campen, “Bijective Volumetric Mapping via
Star Decomposition,” ACM Transactions on Graphics, vol. 43, no. 6, pp.
1–11, 2024, doi: 10.1145/3687950.'
mla: Hinderink, Steffen, et al. “Bijective Volumetric Mapping via Star Decomposition.”
ACM Transactions on Graphics, vol. 43, no. 6, Association for Computing
Machinery (ACM), 2024, pp. 1–11, doi:10.1145/3687950.
short: S. Hinderink, H. Brückler, M. Campen, ACM Transactions on Graphics 43 (2024)
1–11.
date_created: 2025-06-23T09:09:51Z
date_updated: 2025-07-14T12:33:54Z
department:
- _id: '969'
doi: 10.1145/3687950
extern: '1'
intvolume: ' 43'
issue: '6'
language:
- iso: eng
page: 1-11
publication: ACM Transactions on Graphics
publication_identifier:
issn:
- 0730-0301
- 1557-7368
publication_status: published
publisher: Association for Computing Machinery (ACM)
status: public
title: Bijective Volumetric Mapping via Star Decomposition
type: journal_article
user_id: '117512'
volume: 43
year: '2024'
...
---
_id: '52346'
abstract:
- lang: eng
text: Promising cathode materials for fluoride-ion batteries (FIBs) are 3d transition
metal containing oxides with Ruddlesden-Popper-type structure. So far, multi-elemental
compositions were not investigated, but could alternate electrochemical performance
similar to what has been found for cathode materials for lithium-ion batteries.
Within this study, we investigate RP type La2Ni0.75Co0.25O4.08 as an intercalation-based
active cathode material for all-solid-state FIBs. We determine the structural
changes of La2Ni0.75Co0.25O4.08 during fluoride intercalation / de-intercalation
by ex-situ X-ray diffraction, which showed that F- insertion leads to transformation
of the parent phase to three different phases. Changes in Ni and Co oxidation
states and coordination environment were examined by X-ray absorption spectroscopy
and magnetic measurements in order to understand the complex reaction behaviour
of the phases in detail, showing that the two transition metals behave differently
in the charging and discharging process. Under optimized operating conditions,
a cycle life of 120 cycles at a critical cut-off capacity of 40 mAh g-1 against
Pb/PbF2 was obtained, which is one of the highest observed for intercalation electrode
materials in FIBs so far. The average Coulombic efficiencies ranged from 85% to
90%. Thus, La2Ni0.75Co0.25O4.08 could be a promising candidate for cycling-stable
high-energy cathode materials for all-solid-state FIBs
author:
- first_name: Vanita
full_name: Vanita, Vanita
last_name: Vanita
- first_name: Aamir Iqbal
full_name: Waidha, Aamir Iqbal
last_name: Waidha
- first_name: Sami
full_name: Vasala, Sami
last_name: Vasala
- first_name: Pascal
full_name: Puphal, Pascal
last_name: Puphal
- first_name: Roland
full_name: Schoch, Roland
id: '48467'
last_name: Schoch
orcid: 0000-0003-2061-7289
- first_name: Pieter
full_name: Glatzel, Pieter
last_name: Glatzel
- first_name: Matthias
full_name: Bauer, Matthias
id: '47241'
last_name: Bauer
orcid: 0000-0002-9294-6076
- first_name: Oliver
full_name: Clemens, Oliver
last_name: Clemens
citation:
ama: Vanita V, Waidha AI, Vasala S, et al. Insights into the First Multi-Transition-Metal
Containing Ruddlesden Popper-Type Cathode for all-solid-state Fluoride Ion Batteries.
Journal of Materials Chemistry A. 2024;(12). doi:10.1039/d4ta00704b
apa: Vanita, V., Waidha, A. I., Vasala, S., Puphal, P., Schoch, R., Glatzel, P.,
Bauer, M., & Clemens, O. (2024). Insights into the First Multi-Transition-Metal
Containing Ruddlesden Popper-Type Cathode for all-solid-state Fluoride Ion Batteries.
Journal of Materials Chemistry A, 12. https://doi.org/10.1039/d4ta00704b
bibtex: '@article{Vanita_Waidha_Vasala_Puphal_Schoch_Glatzel_Bauer_Clemens_2024,
title={Insights into the First Multi-Transition-Metal Containing Ruddlesden Popper-Type
Cathode for all-solid-state Fluoride Ion Batteries}, DOI={10.1039/d4ta00704b},
number={12}, journal={Journal of Materials Chemistry A}, publisher={Royal Society
of Chemistry (RSC)}, author={Vanita, Vanita and Waidha, Aamir Iqbal and Vasala,
Sami and Puphal, Pascal and Schoch, Roland and Glatzel, Pieter and Bauer, Matthias
and Clemens, Oliver}, year={2024} }'
chicago: Vanita, Vanita, Aamir Iqbal Waidha, Sami Vasala, Pascal Puphal, Roland
Schoch, Pieter Glatzel, Matthias Bauer, and Oliver Clemens. “Insights into the
First Multi-Transition-Metal Containing Ruddlesden Popper-Type Cathode for All-Solid-State
Fluoride Ion Batteries.” Journal of Materials Chemistry A, no. 12 (2024).
https://doi.org/10.1039/d4ta00704b.
ieee: 'V. Vanita et al., “Insights into the First Multi-Transition-Metal
Containing Ruddlesden Popper-Type Cathode for all-solid-state Fluoride Ion Batteries,”
Journal of Materials Chemistry A, no. 12, 2024, doi: 10.1039/d4ta00704b.'
mla: Vanita, Vanita, et al. “Insights into the First Multi-Transition-Metal Containing
Ruddlesden Popper-Type Cathode for All-Solid-State Fluoride Ion Batteries.” Journal
of Materials Chemistry A, no. 12, Royal Society of Chemistry (RSC), 2024,
doi:10.1039/d4ta00704b.
short: V. Vanita, A.I. Waidha, S. Vasala, P. Puphal, R. Schoch, P. Glatzel, M. Bauer,
O. Clemens, Journal of Materials Chemistry A (2024).
date_created: 2024-03-07T10:01:09Z
date_updated: 2025-08-15T12:50:31Z
department:
- _id: '306'
doi: 10.1039/d4ta00704b
issue: '12'
keyword:
- Xray
language:
- iso: eng
publication: Journal of Materials Chemistry A
publication_identifier:
issn:
- 2050-7488
- 2050-7496
publication_status: published
publisher: Royal Society of Chemistry (RSC)
status: public
title: Insights into the First Multi-Transition-Metal Containing Ruddlesden Popper-Type
Cathode for all-solid-state Fluoride Ion Batteries
type: journal_article
user_id: '48467'
year: '2024'
...
---
_id: '61834'
abstract:
- lang: eng
text: Abstract3D printing or additive manufacturing
(AM) possesses enormous potential to benefit the manufacturing industry. Presently,
rotary draw bending (RDB) is one of the most commonly used cold-forming industrial
process for bending metal tubes. Pressure die is a fundamental forming tool in
RDB processes, and it is conventionally made by various grades of comparatively
expensive alloy steels. This research presents a novel design of a pressure die
which can be 3D printed by using inexpensive polymeric filaments. In this research
paper, the 3D-printed pressure die is named as “FFF-pressure die.” The material
used to fabricate the FFF-pressure die is a thermoplastic polymer known as “ecoPLA.”
The mechanical properties of ecoPLA are studied in relation to the process conditions
of a RDB process. Firstly, an initial feasibility of using the FFF-pressure die
in a RDB process is obtained by conducting a quick static stress analysis with
actual process conditions. After initial feasibility, a complete RDB process is
developed and simulated with actual process conditions and material properties.
The FFF-pressure die is then practically fabricated by FFF 3D printer and experimentally
tested on an industrial RDB machine. The results of practical experiments are
compared with the simulation results. In order to make a comparison of the FFF-pressure
die with the conventional metal pressure die, the simulation and practical process
is also conducted with the conventional metal pressure die. A performance and
cost comparison is made between the polymeric FFF-pressure die and the conventional
metal pressure die. Von Mises stresses, contact forces, failure risk, and elastic
deformations are analyzed. The advantages and limitations of using the FFF-pressure
die in a RDB process are discussed in the end. This research intends to widen
the avenue of using cost-effective and lightweight forming tools in metal forming
industries.
author:
- first_name: Muhammad Ali
full_name: Kaleem, Muhammad Ali
last_name: Kaleem
- first_name: Rainer
full_name: Steinheimer, Rainer
last_name: Steinheimer
- first_name: Peter
full_name: Frohn-Sörensen, Peter
last_name: Frohn-Sörensen
- first_name: Steffen
full_name: Gabsa, Steffen
id: '106786'
last_name: Gabsa
- first_name: Bernd
full_name: Engel, Bernd
last_name: Engel
citation:
ama: Kaleem MA, Steinheimer R, Frohn-Sörensen P, Gabsa S, Engel B. Additive manufacturing
of polymeric pressure die for rotary draw bending process. The International
Journal of Advanced Manufacturing Technology. 2024;134(3-4):1789-1804. doi:10.1007/s00170-024-14221-3
apa: Kaleem, M. A., Steinheimer, R., Frohn-Sörensen, P., Gabsa, S., & Engel,
B. (2024). Additive manufacturing of polymeric pressure die for rotary draw bending
process. The International Journal of Advanced Manufacturing Technology,
134(3–4), 1789–1804. https://doi.org/10.1007/s00170-024-14221-3
bibtex: '@article{Kaleem_Steinheimer_Frohn-Sörensen_Gabsa_Engel_2024, title={Additive
manufacturing of polymeric pressure die for rotary draw bending process}, volume={134},
DOI={10.1007/s00170-024-14221-3},
number={3–4}, journal={The International Journal of Advanced Manufacturing Technology},
publisher={Springer Science and Business Media LLC}, author={Kaleem, Muhammad
Ali and Steinheimer, Rainer and Frohn-Sörensen, Peter and Gabsa, Steffen and Engel,
Bernd}, year={2024}, pages={1789–1804} }'
chicago: 'Kaleem, Muhammad Ali, Rainer Steinheimer, Peter Frohn-Sörensen, Steffen
Gabsa, and Bernd Engel. “Additive Manufacturing of Polymeric Pressure Die for
Rotary Draw Bending Process.” The International Journal of Advanced Manufacturing
Technology 134, no. 3–4 (2024): 1789–1804. https://doi.org/10.1007/s00170-024-14221-3.'
ieee: 'M. A. Kaleem, R. Steinheimer, P. Frohn-Sörensen, S. Gabsa, and B. Engel,
“Additive manufacturing of polymeric pressure die for rotary draw bending process,”
The International Journal of Advanced Manufacturing Technology, vol. 134,
no. 3–4, pp. 1789–1804, 2024, doi: 10.1007/s00170-024-14221-3.'
mla: Kaleem, Muhammad Ali, et al. “Additive Manufacturing of Polymeric Pressure
Die for Rotary Draw Bending Process.” The International Journal of Advanced
Manufacturing Technology, vol. 134, no. 3–4, Springer Science and Business
Media LLC, 2024, pp. 1789–804, doi:10.1007/s00170-024-14221-3.
short: M.A. Kaleem, R. Steinheimer, P. Frohn-Sörensen, S. Gabsa, B. Engel, The International
Journal of Advanced Manufacturing Technology 134 (2024) 1789–1804.
date_created: 2025-10-15T09:02:15Z
date_updated: 2025-10-15T13:08:16Z
doi: 10.1007/s00170-024-14221-3
intvolume: ' 134'
issue: 3-4
language:
- iso: eng
page: 1789-1804
publication: The International Journal of Advanced Manufacturing Technology
publication_identifier:
issn:
- 0268-3768
- 1433-3015
publication_status: published
publisher: Springer Science and Business Media LLC
status: public
title: Additive manufacturing of polymeric pressure die for rotary draw bending process
type: journal_article
user_id: '106786'
volume: 134
year: '2024'
...
---
_id: '62942'
abstract:
- lang: eng
text: AbstractNanostructured bilayer thin films
with superhydrophobic and superhydrophilic surfaces were prepared using Ti6Al4V
alloy substrates which allowed for the comparative analysis of polyvinyl acetate
(PVAc) particle adsorption as a function of the interface structure. The PVAc
particles were obtained from emulsion polymerization of vinyl acetate. A superhydrophilic
TiO2 nanofiber-based 3D network was created on the Ti6Al4V
alloy substrate by application of a hydrothermal method. Subsequent UV-grafting
of ultra-thin polydimethylsiloxane (PDMS) layers resulted in a superhydrophobic
surface. The modification steps were followed via Diffuse Reflectance Infrared
Fourier Transform Spectroscopy, X-ray Photoelectron Spectroscopy, Field Emission-Scanning
Electron Microscopy, contact angle and Electrochemical Impedance Spectroscopy.
A mechanism for the adsorption of PVAc at the two electrolyte/substrate interfaces
could be revealed.
article_number: '294'
author:
- first_name: Vanessa
full_name: Neßlinger, Vanessa
id: '54649'
last_name: Neßlinger
orcid: 0000-0001-9416-1646
- first_name: Jan
full_name: Atlanov, Jan
last_name: Atlanov
- first_name: Guido
full_name: Grundmeier, Guido
id: '194'
last_name: Grundmeier
citation:
ama: Neßlinger V, Atlanov J, Grundmeier G. Interactions of polyvinyl acetate dispersions
with nanostructured superhydrophilic and superhydrophobic Ti6Al4V alloy surfaces.
Discover Applied Sciences. 2024;6(6). doi:10.1007/s42452-024-05916-z
apa: Neßlinger, V., Atlanov, J., & Grundmeier, G. (2024). Interactions of polyvinyl
acetate dispersions with nanostructured superhydrophilic and superhydrophobic
Ti6Al4V alloy surfaces. Discover Applied Sciences, 6(6), Article
294. https://doi.org/10.1007/s42452-024-05916-z
bibtex: '@article{Neßlinger_Atlanov_Grundmeier_2024, title={Interactions of polyvinyl
acetate dispersions with nanostructured superhydrophilic and superhydrophobic
Ti6Al4V alloy surfaces}, volume={6}, DOI={10.1007/s42452-024-05916-z},
number={6294}, journal={Discover Applied Sciences}, publisher={Springer Science
and Business Media LLC}, author={Neßlinger, Vanessa and Atlanov, Jan and Grundmeier,
Guido}, year={2024} }'
chicago: Neßlinger, Vanessa, Jan Atlanov, and Guido Grundmeier. “Interactions of
Polyvinyl Acetate Dispersions with Nanostructured Superhydrophilic and Superhydrophobic
Ti6Al4V Alloy Surfaces.” Discover Applied Sciences 6, no. 6 (2024). https://doi.org/10.1007/s42452-024-05916-z.
ieee: 'V. Neßlinger, J. Atlanov, and G. Grundmeier, “Interactions of polyvinyl acetate
dispersions with nanostructured superhydrophilic and superhydrophobic Ti6Al4V
alloy surfaces,” Discover Applied Sciences, vol. 6, no. 6, Art. no. 294,
2024, doi: 10.1007/s42452-024-05916-z.'
mla: Neßlinger, Vanessa, et al. “Interactions of Polyvinyl Acetate Dispersions with
Nanostructured Superhydrophilic and Superhydrophobic Ti6Al4V Alloy Surfaces.”
Discover Applied Sciences, vol. 6, no. 6, 294, Springer Science and Business
Media LLC, 2024, doi:10.1007/s42452-024-05916-z.
short: V. Neßlinger, J. Atlanov, G. Grundmeier, Discover Applied Sciences 6 (2024).
date_created: 2025-12-08T08:32:26Z
date_updated: 2025-12-08T08:33:00Z
department:
- _id: '302'
doi: 10.1007/s42452-024-05916-z
intvolume: ' 6'
issue: '6'
language:
- iso: eng
project:
- _id: '52'
name: Computing Resources Provided by the Paderborn Center for Parallel Computing
publication: Discover Applied Sciences
publication_identifier:
issn:
- 3004-9261
publication_status: published
publisher: Springer Science and Business Media LLC
status: public
title: Interactions of polyvinyl acetate dispersions with nanostructured superhydrophilic
and superhydrophobic Ti6Al4V alloy surfaces
type: journal_article
user_id: '54649'
volume: 6
year: '2024'
...
---
_id: '47992'
abstract:
- lang: eng
text: Ferroelectric domain boundaries are quasi-two-dimensional functional interfaces
with high prospects for nanoelectronic applications. Despite their reduced dimensionality,
they can exhibit complex non-Ising polarization configurations and unexpected
physical properties. Here, the impact of the three-dimensional (3D) curvature
on the polarization profile of nominally uncharged 180° domain walls in LiNbO3
is studied using second-harmonic generation microscopy and 3D polarimetry analysis.
Correlations between the domain-wall curvature and the variation of its internal
polarization unfold in the form of modulations of the Néel-like character, which
we attribute to the flexoelectric effect. While the Néel-like character originates
mainly from the tilting of the domain wall, the internal polarization adjusts
its orientation due to the synergetic upshot of dipolar and monopolar bound charges
and their variation with the 3D curvature. Our results show that curved interfaces
in solid crystals may offer a rich playground for tailoring nanoscale polar states.
article_type: original
author:
- first_name: Ulises
full_name: Acevedo-Salas, Ulises
last_name: Acevedo-Salas
- first_name: Boris
full_name: Croes, Boris
last_name: Croes
- first_name: Yide
full_name: Zhang, Yide
last_name: Zhang
- first_name: Olivier
full_name: Cregut, Olivier
last_name: Cregut
- first_name: Kokou Dodzi
full_name: Dorkenoo, Kokou Dodzi
last_name: Dorkenoo
- first_name: Benjamin
full_name: Kirbus, Benjamin
last_name: Kirbus
- first_name: Ekta
full_name: Singh, Ekta
last_name: Singh
- first_name: Henrik
full_name: Beccard, Henrik
last_name: Beccard
- first_name: Michael
full_name: Rüsing, Michael
id: '22501'
last_name: Rüsing
orcid: 0000-0003-4682-4577
- first_name: Lukas M.
full_name: Eng, Lukas M.
last_name: Eng
- first_name: Riccardo
full_name: Hertel, Riccardo
last_name: Hertel
- first_name: Eugene A.
full_name: Eliseev, Eugene A.
last_name: Eliseev
- first_name: Anna N.
full_name: Morozovska, Anna N.
last_name: Morozovska
- first_name: Salia
full_name: Cherifi-Hertel, Salia
last_name: Cherifi-Hertel
citation:
ama: Acevedo-Salas U, Croes B, Zhang Y, et al. Impact of 3D Curvature on the Polarization
Orientation in Non-Ising Domain Walls. Nano Letters. 2023;23(3):795-803.
doi:10.1021/acs.nanolett.2c03579
apa: Acevedo-Salas, U., Croes, B., Zhang, Y., Cregut, O., Dorkenoo, K. D., Kirbus,
B., Singh, E., Beccard, H., Rüsing, M., Eng, L. M., Hertel, R., Eliseev, E. A.,
Morozovska, A. N., & Cherifi-Hertel, S. (2023). Impact of 3D Curvature on
the Polarization Orientation in Non-Ising Domain Walls. Nano Letters, 23(3),
795–803. https://doi.org/10.1021/acs.nanolett.2c03579
bibtex: '@article{Acevedo-Salas_Croes_Zhang_Cregut_Dorkenoo_Kirbus_Singh_Beccard_Rüsing_Eng_et
al._2023, title={Impact of 3D Curvature on the Polarization Orientation in Non-Ising
Domain Walls}, volume={23}, DOI={10.1021/acs.nanolett.2c03579},
number={3}, journal={Nano Letters}, publisher={American Chemical Society (ACS)},
author={Acevedo-Salas, Ulises and Croes, Boris and Zhang, Yide and Cregut, Olivier
and Dorkenoo, Kokou Dodzi and Kirbus, Benjamin and Singh, Ekta and Beccard, Henrik
and Rüsing, Michael and Eng, Lukas M. and et al.}, year={2023}, pages={795–803}
}'
chicago: 'Acevedo-Salas, Ulises, Boris Croes, Yide Zhang, Olivier Cregut, Kokou
Dodzi Dorkenoo, Benjamin Kirbus, Ekta Singh, et al. “Impact of 3D Curvature on
the Polarization Orientation in Non-Ising Domain Walls.” Nano Letters 23,
no. 3 (2023): 795–803. https://doi.org/10.1021/acs.nanolett.2c03579.'
ieee: 'U. Acevedo-Salas et al., “Impact of 3D Curvature on the Polarization
Orientation in Non-Ising Domain Walls,” Nano Letters, vol. 23, no. 3, pp.
795–803, 2023, doi: 10.1021/acs.nanolett.2c03579.'
mla: Acevedo-Salas, Ulises, et al. “Impact of 3D Curvature on the Polarization Orientation
in Non-Ising Domain Walls.” Nano Letters, vol. 23, no. 3, American Chemical
Society (ACS), 2023, pp. 795–803, doi:10.1021/acs.nanolett.2c03579.
short: U. Acevedo-Salas, B. Croes, Y. Zhang, O. Cregut, K.D. Dorkenoo, B. Kirbus,
E. Singh, H. Beccard, M. Rüsing, L.M. Eng, R. Hertel, E.A. Eliseev, A.N. Morozovska,
S. Cherifi-Hertel, Nano Letters 23 (2023) 795–803.
date_created: 2023-10-11T09:06:05Z
date_updated: 2023-10-11T09:06:31Z
doi: 10.1021/acs.nanolett.2c03579
extern: '1'
intvolume: ' 23'
issue: '3'
keyword:
- Mechanical Engineering
- Condensed Matter Physics
- General Materials Science
- General Chemistry
- Bioengineering
language:
- iso: eng
page: 795-803
publication: Nano Letters
publication_identifier:
issn:
- 1530-6984
- 1530-6992
publication_status: published
publisher: American Chemical Society (ACS)
quality_controlled: '1'
status: public
title: Impact of 3D Curvature on the Polarization Orientation in Non-Ising Domain
Walls
type: journal_article
user_id: '22501'
volume: 23
year: '2023'
...
---
_id: '48377'
author:
- first_name: Katharina S.
full_name: Weber, Katharina S.
last_name: Weber
- first_name: Sabrina
full_name: Schlesinger, Sabrina
last_name: Schlesinger
- first_name: Alexander
full_name: Lang, Alexander
last_name: Lang
- first_name: Klaus
full_name: Straßburger, Klaus
last_name: Straßburger
- first_name: Haifa
full_name: Maalmi, Haifa
last_name: Maalmi
- first_name: Oana P.
full_name: Zaharia, Oana P.
last_name: Zaharia
- first_name: Janina
full_name: Goletzke, Janina
last_name: Goletzke
- first_name: Anette
full_name: Buyken, Anette
id: '65985'
last_name: Buyken
- first_name: Sandra
full_name: Trenkamp, Sandra
last_name: Trenkamp
- first_name: Robert
full_name: Wagner, Robert
last_name: Wagner
- first_name: Wolfgang
full_name: Lieb, Wolfgang
last_name: Lieb
- first_name: Michael
full_name: Roden, Michael
last_name: Roden
- first_name: Christian
full_name: Herder, Christian
last_name: Herder
citation:
ama: 'Weber KS, Schlesinger S, Lang A, et al. Plant-based dietary patterns and cardiometabolic
risk factors in subgroups of individuals with diabetes. In: Diabetologie Und
Stoffwechsel. Georg Thieme Verlag; 2023. doi:10.1055/s-0043-1767936'
apa: Weber, K. S., Schlesinger, S., Lang, A., Straßburger, K., Maalmi, H., Zaharia,
O. P., Goletzke, J., Buyken, A., Trenkamp, S., Wagner, R., Lieb, W., Roden, M.,
& Herder, C. (2023). Plant-based dietary patterns and cardiometabolic risk
factors in subgroups of individuals with diabetes. Diabetologie Und Stoffwechsel.
https://doi.org/10.1055/s-0043-1767936
bibtex: '@inproceedings{Weber_Schlesinger_Lang_Straßburger_Maalmi_Zaharia_Goletzke_Buyken_Trenkamp_Wagner_et
al._2023, title={Plant-based dietary patterns and cardiometabolic risk factors
in subgroups of individuals with diabetes}, DOI={10.1055/s-0043-1767936},
booktitle={Diabetologie und Stoffwechsel}, publisher={Georg Thieme Verlag}, author={Weber,
Katharina S. and Schlesinger, Sabrina and Lang, Alexander and Straßburger, Klaus
and Maalmi, Haifa and Zaharia, Oana P. and Goletzke, Janina and Buyken, Anette
and Trenkamp, Sandra and Wagner, Robert and et al.}, year={2023} }'
chicago: Weber, Katharina S., Sabrina Schlesinger, Alexander Lang, Klaus Straßburger,
Haifa Maalmi, Oana P. Zaharia, Janina Goletzke, et al. “Plant-Based Dietary Patterns
and Cardiometabolic Risk Factors in Subgroups of Individuals with Diabetes.” In
Diabetologie Und Stoffwechsel. Georg Thieme Verlag, 2023. https://doi.org/10.1055/s-0043-1767936.
ieee: 'K. S. Weber et al., “Plant-based dietary patterns and cardiometabolic
risk factors in subgroups of individuals with diabetes,” 2023, doi: 10.1055/s-0043-1767936.'
mla: Weber, Katharina S., et al. “Plant-Based Dietary Patterns and Cardiometabolic
Risk Factors in Subgroups of Individuals with Diabetes.” Diabetologie Und Stoffwechsel,
Georg Thieme Verlag, 2023, doi:10.1055/s-0043-1767936.
short: 'K.S. Weber, S. Schlesinger, A. Lang, K. Straßburger, H. Maalmi, O.P. Zaharia,
J. Goletzke, A. Buyken, S. Trenkamp, R. Wagner, W. Lieb, M. Roden, C. Herder,
in: Diabetologie Und Stoffwechsel, Georg Thieme Verlag, 2023.'
date_created: 2023-10-23T07:56:15Z
date_updated: 2023-10-23T07:56:54Z
department:
- _id: '22'
doi: 10.1055/s-0043-1767936
language:
- iso: eng
publication: Diabetologie und Stoffwechsel
publication_identifier:
issn:
- 1861-9010
publication_status: published
publisher: Georg Thieme Verlag
status: public
title: Plant-based dietary patterns and cardiometabolic risk factors in subgroups
of individuals with diabetes
type: conference
user_id: '92491'
year: '2023'
...
---
_id: '48374'
abstract:
- lang: eng
text: "Abstract\r\n Purpose\r\n
\ Protein-rich foods show heterogeneous associations with
the risk of type 2 diabetes (T2D) and it remains unclear whether habitual protein
intake is related to T2D risk. We carried out an umbrella review of systematic
reviews (SR) of randomised trials and/or cohort studies on protein intake in relation
to risks of T2D.\r\n \r\n Methods\r\n
\ Following a pre-specified protocol (PROSPERO: CRD42018082395),
we retrieved SRs on protein intake and T2D risk published between July 1st 2009
and May 22nd 2022, and assessed the methodological quality and outcome-specific
certainty of the evidence using a modified version of AMSTAR 2 and NutriGrade,
respectively. The overall certainty of evidence was rated according to predefined
criteria.\r\n \r\n Results\r\n
\ Eight SRs were identified of which six contained meta-analyses.
The majority of SRs on total protein intake had moderate or high methodological
quality and moderate outcome-specific certainty of evidence according to NutriGrade,
however, the latter was low for the majority of SRs on animal and plant protein.
Six of the eight SRs reported risk increases with both total and animal protein.
According to one SR, total protein intake in studies was ~ 21 energy percentage
(%E) in the highest intake category and 15%E in the lowest intake category. Relative
Risks comparing high versus low intake in most recent SRs ranged from 1.09 (two
SRs, 95% CIs 1.02–1.15 and 1.06–1.13) to 1.11 (1.05–1.16) for total protein (between
8 and 12 cohort studies included) and from 1.13 (1.08–1.19) to 1.19 (two SRs,
1.11–1.28 and 1.11–1.28) (8–9 cohort studies) for animal protein. However, SRs
on RCTs examining major glycaemic traits (HbA1c, fasting
glucose, fasting insulin) do not support a clear biological link with T2D risk.
For plant protein, some recent SRs pointed towards risk decreases and non-linear
associations, however, the majority did not support an association with T2D risk.\r\n
\ \r\n Conclusion\r\n
\ Higher total protein intake was possibly associated with
higher T2D risk, while there is insufficient evidence for a risk increase with
higher intakes of animal protein and a risk decrease with plant protein intake.
Given that most SRs on plant protein did not indicate an association, there is
possibly a lack of an effect.\r\n "
author:
- first_name: Matthias B.
full_name: Schulze, Matthias B.
last_name: Schulze
- first_name: Julia
full_name: Haardt, Julia
last_name: Haardt
- first_name: Anna M.
full_name: Amini, Anna M.
last_name: Amini
- first_name: Nicole
full_name: Kalotai, Nicole
last_name: Kalotai
- first_name: Andreas
full_name: Lehmann, Andreas
last_name: Lehmann
- first_name: Annemarie
full_name: Schmidt, Annemarie
last_name: Schmidt
- first_name: Anette
full_name: Buyken, Anette
id: '65985'
last_name: Buyken
- first_name: Sarah
full_name: Egert, Sarah
last_name: Egert
- first_name: Sabine
full_name: Ellinger, Sabine
last_name: Ellinger
- first_name: Anja
full_name: Kroke, Anja
last_name: Kroke
- first_name: Tilman
full_name: Kühn, Tilman
last_name: Kühn
- first_name: Sandrine
full_name: Louis, Sandrine
last_name: Louis
- first_name: Katharina
full_name: Nimptsch, Katharina
last_name: Nimptsch
- first_name: Lukas
full_name: Schwingshackl, Lukas
last_name: Schwingshackl
- first_name: Roswitha
full_name: Siener, Roswitha
last_name: Siener
- first_name: Armin
full_name: Zittermann, Armin
last_name: Zittermann
- first_name: Bernhard
full_name: Watzl, Bernhard
last_name: Watzl
- first_name: Stefan
full_name: Lorkowski, Stefan
last_name: Lorkowski
citation:
ama: 'Schulze MB, Haardt J, Amini AM, et al. Protein intake and type 2 diabetes
mellitus: an umbrella review of systematic reviews for the evidence-based guideline
for protein intake of the German Nutrition Society. European Journal of Nutrition.
Published online 2023. doi:10.1007/s00394-023-03234-5'
apa: 'Schulze, M. B., Haardt, J., Amini, A. M., Kalotai, N., Lehmann, A., Schmidt,
A., Buyken, A., Egert, S., Ellinger, S., Kroke, A., Kühn, T., Louis, S., Nimptsch,
K., Schwingshackl, L., Siener, R., Zittermann, A., Watzl, B., & Lorkowski,
S. (2023). Protein intake and type 2 diabetes mellitus: an umbrella review of
systematic reviews for the evidence-based guideline for protein intake of the
German Nutrition Society. European Journal of Nutrition. https://doi.org/10.1007/s00394-023-03234-5'
bibtex: '@article{Schulze_Haardt_Amini_Kalotai_Lehmann_Schmidt_Buyken_Egert_Ellinger_Kroke_et
al._2023, title={Protein intake and type 2 diabetes mellitus: an umbrella review
of systematic reviews for the evidence-based guideline for protein intake of the
German Nutrition Society}, DOI={10.1007/s00394-023-03234-5},
journal={European Journal of Nutrition}, publisher={Springer Science and Business
Media LLC}, author={Schulze, Matthias B. and Haardt, Julia and Amini, Anna M.
and Kalotai, Nicole and Lehmann, Andreas and Schmidt, Annemarie and Buyken, Anette
and Egert, Sarah and Ellinger, Sabine and Kroke, Anja and et al.}, year={2023}
}'
chicago: 'Schulze, Matthias B., Julia Haardt, Anna M. Amini, Nicole Kalotai, Andreas
Lehmann, Annemarie Schmidt, Anette Buyken, et al. “Protein Intake and Type 2 Diabetes
Mellitus: An Umbrella Review of Systematic Reviews for the Evidence-Based Guideline
for Protein Intake of the German Nutrition Society.” European Journal of Nutrition,
2023. https://doi.org/10.1007/s00394-023-03234-5.'
ieee: 'M. B. Schulze et al., “Protein intake and type 2 diabetes mellitus:
an umbrella review of systematic reviews for the evidence-based guideline for
protein intake of the German Nutrition Society,” European Journal of Nutrition,
2023, doi: 10.1007/s00394-023-03234-5.'
mla: 'Schulze, Matthias B., et al. “Protein Intake and Type 2 Diabetes Mellitus:
An Umbrella Review of Systematic Reviews for the Evidence-Based Guideline for
Protein Intake of the German Nutrition Society.” European Journal of Nutrition,
Springer Science and Business Media LLC, 2023, doi:10.1007/s00394-023-03234-5.'
short: M.B. Schulze, J. Haardt, A.M. Amini, N. Kalotai, A. Lehmann, A. Schmidt,
A. Buyken, S. Egert, S. Ellinger, A. Kroke, T. Kühn, S. Louis, K. Nimptsch, L.
Schwingshackl, R. Siener, A. Zittermann, B. Watzl, S. Lorkowski, European Journal
of Nutrition (2023).
date_created: 2023-10-23T07:35:18Z
date_updated: 2023-10-23T07:35:57Z
department:
- _id: '22'
doi: 10.1007/s00394-023-03234-5
keyword:
- Nutrition and Dietetics
- Medicine (miscellaneous)
language:
- iso: eng
publication: European Journal of Nutrition
publication_identifier:
issn:
- 1436-6207
- 1436-6215
publication_status: published
publisher: Springer Science and Business Media LLC
status: public
title: 'Protein intake and type 2 diabetes mellitus: an umbrella review of systematic
reviews for the evidence-based guideline for protein intake of the German Nutrition
Society'
type: journal_article
user_id: '92491'
year: '2023'
...
---
_id: '48373'
abstract:
- lang: eng
text: "Abstract\r\n Purpose\r\n
\ This umbrella review aimed to assess whether dietary protein
intake with regard to quantitative (higher vs. lower dietary protein intake) and
qualitative considerations (total, plant-based or animal-based protein intake)
affects body weight (BW), fat mass (FM) and waist circumference (WC).\r\n
\ \r\n Methods\r\n
\ A systematic literature search was conducted in PubMed,
Embase and Cochrane Database of Systematic Reviews for systematic reviews (SRs)
with and without meta-analyses of prospective studies published between 04 October
2007 and 04 January 2022. Methodological quality and outcome-specific certainty
of evidence of the retrieved SRs were assessed by using AMSTAR 2 and NutriGrade,
respectively, in order to rate the overall certainty of evidence using predefined
criteria.\r\n \r\n Results\r\n
\ Thirty-three SRs were included in this umbrella review;
29 were based on randomised controlled trials, a few included cohort studies.
In studies without energy restriction, a high-protein diet did not modulate BW,
FM and WC in adults in general (all “possible” evidence); for older adults, overall
certainty of evidence was “insufficient” for all parameters. Under hypoenergetic
diets, a high-protein diet mostly decreased BW and FM, but evidence was “insufficient”
due to low methodological quality. Evidence regarding an influence of the protein
type on BW, FM and WC was “insufficient”.\r\n \r\n
\ Conclusion\r\n “Possible”
evidence exists that the amount of protein does not affect BW, FM and WC in adults
under isoenergetic conditions. Its impact on the reduction in BW and FM under
hypoenergetic conditions remains unclear; evidence for an influence of protein
type on BW, FM and WC is “insufficient”.\r\n "
author:
- first_name: Sabine
full_name: Ellinger, Sabine
last_name: Ellinger
- first_name: Anna M.
full_name: Amini, Anna M.
last_name: Amini
- first_name: Julia
full_name: Haardt, Julia
last_name: Haardt
- first_name: Andreas
full_name: Lehmann, Andreas
last_name: Lehmann
- first_name: Annemarie
full_name: Schmidt, Annemarie
last_name: Schmidt
- first_name: Heike A.
full_name: Bischoff-Ferrari, Heike A.
last_name: Bischoff-Ferrari
- first_name: Anette
full_name: Buyken, Anette
id: '65985'
last_name: Buyken
- first_name: Anja
full_name: Kroke, Anja
last_name: Kroke
- first_name: Tilman
full_name: Kühn, Tilman
last_name: Kühn
- first_name: Sandrine
full_name: Louis, Sandrine
last_name: Louis
- first_name: Stefan
full_name: Lorkowski, Stefan
last_name: Lorkowski
- first_name: Katharina
full_name: Nimptsch, Katharina
last_name: Nimptsch
- first_name: Matthias B.
full_name: Schulze, Matthias B.
last_name: Schulze
- first_name: Lukas
full_name: Schwingshackl, Lukas
last_name: Schwingshackl
- first_name: Roswitha
full_name: Siener, Roswitha
last_name: Siener
- first_name: Gabriele I.
full_name: Stangl, Gabriele I.
last_name: Stangl
- first_name: Dorothee
full_name: Volkert, Dorothee
last_name: Volkert
- first_name: Armin
full_name: Zittermann, Armin
last_name: Zittermann
- first_name: Bernhard
full_name: Watzl, Bernhard
last_name: Watzl
- first_name: Sarah
full_name: Egert, Sarah
last_name: Egert
citation:
ama: 'Ellinger S, Amini AM, Haardt J, et al. Protein intake and body weight, fat
mass and waist circumference: an umbrella review of systematic reviews for the
evidence-based guideline on protein intake of the German Nutrition Society. European
Journal of Nutrition. Published online 2023. doi:10.1007/s00394-023-03220-x'
apa: 'Ellinger, S., Amini, A. M., Haardt, J., Lehmann, A., Schmidt, A., Bischoff-Ferrari,
H. A., Buyken, A., Kroke, A., Kühn, T., Louis, S., Lorkowski, S., Nimptsch, K.,
Schulze, M. B., Schwingshackl, L., Siener, R., Stangl, G. I., Volkert, D., Zittermann,
A., Watzl, B., & Egert, S. (2023). Protein intake and body weight, fat mass
and waist circumference: an umbrella review of systematic reviews for the evidence-based
guideline on protein intake of the German Nutrition Society. European Journal
of Nutrition. https://doi.org/10.1007/s00394-023-03220-x'
bibtex: '@article{Ellinger_Amini_Haardt_Lehmann_Schmidt_Bischoff-Ferrari_Buyken_Kroke_Kühn_Louis_et
al._2023, title={Protein intake and body weight, fat mass and waist circumference:
an umbrella review of systematic reviews for the evidence-based guideline on protein
intake of the German Nutrition Society}, DOI={10.1007/s00394-023-03220-x},
journal={European Journal of Nutrition}, publisher={Springer Science and Business
Media LLC}, author={Ellinger, Sabine and Amini, Anna M. and Haardt, Julia and
Lehmann, Andreas and Schmidt, Annemarie and Bischoff-Ferrari, Heike A. and Buyken,
Anette and Kroke, Anja and Kühn, Tilman and Louis, Sandrine and et al.}, year={2023}
}'
chicago: 'Ellinger, Sabine, Anna M. Amini, Julia Haardt, Andreas Lehmann, Annemarie
Schmidt, Heike A. Bischoff-Ferrari, Anette Buyken, et al. “Protein Intake and
Body Weight, Fat Mass and Waist Circumference: An Umbrella Review of Systematic
Reviews for the Evidence-Based Guideline on Protein Intake of the German Nutrition
Society.” European Journal of Nutrition, 2023. https://doi.org/10.1007/s00394-023-03220-x.'
ieee: 'S. Ellinger et al., “Protein intake and body weight, fat mass and
waist circumference: an umbrella review of systematic reviews for the evidence-based
guideline on protein intake of the German Nutrition Society,” European Journal
of Nutrition, 2023, doi: 10.1007/s00394-023-03220-x.'
mla: 'Ellinger, Sabine, et al. “Protein Intake and Body Weight, Fat Mass and Waist
Circumference: An Umbrella Review of Systematic Reviews for the Evidence-Based
Guideline on Protein Intake of the German Nutrition Society.” European Journal
of Nutrition, Springer Science and Business Media LLC, 2023, doi:10.1007/s00394-023-03220-x.'
short: S. Ellinger, A.M. Amini, J. Haardt, A. Lehmann, A. Schmidt, H.A. Bischoff-Ferrari,
A. Buyken, A. Kroke, T. Kühn, S. Louis, S. Lorkowski, K. Nimptsch, M.B. Schulze,
L. Schwingshackl, R. Siener, G.I. Stangl, D. Volkert, A. Zittermann, B. Watzl,
S. Egert, European Journal of Nutrition (2023).
date_created: 2023-10-23T07:23:52Z
date_updated: 2023-10-23T07:27:49Z
department:
- _id: '22'
doi: 10.1007/s00394-023-03220-x
keyword:
- Nutrition and Dietetics
- Medicine (miscellaneous)
language:
- iso: eng
publication: European Journal of Nutrition
publication_identifier:
issn:
- 1436-6207
- 1436-6215
publication_status: published
publisher: Springer Science and Business Media LLC
status: public
title: 'Protein intake and body weight, fat mass and waist circumference: an umbrella
review of systematic reviews for the evidence-based guideline on protein intake
of the German Nutrition Society'
type: journal_article
user_id: '92491'
year: '2023'
...
---
_id: '48456'
abstract:
- lang: eng
text: "Abstract\r\n Purpose\r\n
\ Our aim was to assess alignment in timing of ‘highest caloric
intake’ with individual chronotype and its association with body composition in
adolescents.\r\n \r\n Methods\r\n
\ We used repeatedly collected data from n = 196
adolescents (age 9–16 years, providing N = 401 yearly
questionnaires) of the DONALD open cohort study. Chronotype was assessed by the
Munich Chronotype Questionnaire from which midpoint of sleep (MSFsc) was derived.
A sex- and age-specific diet-chrono-alignment score (DCAS) was calculated as the
difference in hours between the chronotype-specific median timing of highest caloric
intake of the studied population and the individual timing of ‘highest caloric
intake’ or vice versa. Repeated-measures regression models were applied to study
cross-sectional and longitudinal associations between the DCAS and body composition,
e.g., Fat Mass Index (FMI) or Fat Free Mass Index (FFMI).\r\n \r\n
\ Results\r\n DCAS ranged
from −6:42 h to + 8:01 h and was not associated with body composition. Among adolescents
with a later chronotype (N = 201) a 1 h increase in
DCAS (later consumption of ‘highest caloric intake’ in comparison to the median
intake of that group), increased FFMI by 1.92 kg/m2 (95%
CI: 0.15, 3.69, p value = 0.04) over a median follow-up
of 0.94 year.\r\n \r\n Conclusion\r\n
\ Alignment of energy intake with individual chronotype appears
beneficial for FFMI among those with a late chronotype.\r\n "
author:
- first_name: Nicole
full_name: Jankovic, Nicole
last_name: Jankovic
- first_name: Sarah
full_name: Schmitting, Sarah
last_name: Schmitting
- first_name: Bianca
full_name: Stutz, Bianca
id: '77099'
last_name: Stutz
- first_name: Bettina
full_name: Krüger, Bettina
id: '49428'
last_name: Krüger
orcid: 0000-0001-5351-1785
- first_name: Anette
full_name: Buyken, Anette
id: '65985'
last_name: Buyken
- first_name: Ute
full_name: Alexy, Ute
last_name: Alexy
citation:
ama: 'Jankovic N, Schmitting S, Stutz B, Krüger B, Buyken A, Alexy U. Alignment
between timing of ‘highest caloric intake’ and chronotype in relation to body
composition during adolescence: the DONALD Study. European Journal of Nutrition.
Published online 2023. doi:10.1007/s00394-023-03259-w'
apa: 'Jankovic, N., Schmitting, S., Stutz, B., Krüger, B., Buyken, A., & Alexy,
U. (2023). Alignment between timing of ‘highest caloric intake’ and chronotype
in relation to body composition during adolescence: the DONALD Study. European
Journal of Nutrition. https://doi.org/10.1007/s00394-023-03259-w'
bibtex: '@article{Jankovic_Schmitting_Stutz_Krüger_Buyken_Alexy_2023, title={Alignment
between timing of ‘highest caloric intake’ and chronotype in relation to body
composition during adolescence: the DONALD Study}, DOI={10.1007/s00394-023-03259-w},
journal={European Journal of Nutrition}, publisher={Springer Science and Business
Media LLC}, author={Jankovic, Nicole and Schmitting, Sarah and Stutz, Bianca and
Krüger, Bettina and Buyken, Anette and Alexy, Ute}, year={2023} }'
chicago: 'Jankovic, Nicole, Sarah Schmitting, Bianca Stutz, Bettina Krüger, Anette
Buyken, and Ute Alexy. “Alignment between Timing of ‘Highest Caloric Intake’ and
Chronotype in Relation to Body Composition during Adolescence: The DONALD Study.”
European Journal of Nutrition, 2023. https://doi.org/10.1007/s00394-023-03259-w.'
ieee: 'N. Jankovic, S. Schmitting, B. Stutz, B. Krüger, A. Buyken, and U. Alexy,
“Alignment between timing of ‘highest caloric intake’ and chronotype in relation
to body composition during adolescence: the DONALD Study,” European Journal
of Nutrition, 2023, doi: 10.1007/s00394-023-03259-w.'
mla: 'Jankovic, Nicole, et al. “Alignment between Timing of ‘Highest Caloric Intake’
and Chronotype in Relation to Body Composition during Adolescence: The DONALD
Study.” European Journal of Nutrition, Springer Science and Business Media
LLC, 2023, doi:10.1007/s00394-023-03259-w.'
short: N. Jankovic, S. Schmitting, B. Stutz, B. Krüger, A. Buyken, U. Alexy, European
Journal of Nutrition (2023).
date_created: 2023-10-25T08:38:46Z
date_updated: 2023-10-25T08:39:21Z
department:
- _id: '22'
doi: 10.1007/s00394-023-03259-w
keyword:
- Nutrition and Dietetics
- Medicine (miscellaneous)
language:
- iso: eng
publication: European Journal of Nutrition
publication_identifier:
issn:
- 1436-6207
- 1436-6215
publication_status: published
publisher: Springer Science and Business Media LLC
status: public
title: 'Alignment between timing of ‘highest caloric intake’ and chronotype in relation
to body composition during adolescence: the DONALD Study'
type: journal_article
user_id: '92491'
year: '2023'
...
---
_id: '48900'
author:
- first_name: Sarah
full_name: Diederich, Sarah
last_name: Diederich
- first_name: Anja
full_name: Iseke, Anja
last_name: Iseke
- first_name: Kerstin
full_name: Pull, Kerstin
last_name: Pull
- first_name: Martin
full_name: Schneider, Martin
last_name: Schneider
citation:
ama: 'Diederich S, Iseke A, Pull K, Schneider M. Role (in-)congruity and the Catch
22 for female executives: how stereotyping contributes to the gender pay gap at
top executive level. The International Journal of Human Resource Management.
Published online 2023:1-29. doi:10.1080/09585192.2023.2273331'
apa: 'Diederich, S., Iseke, A., Pull, K., & Schneider, M. (2023). Role (in-)congruity
and the Catch 22 for female executives: how stereotyping contributes to the gender
pay gap at top executive level. The International Journal of Human Resource
Management, 1–29. https://doi.org/10.1080/09585192.2023.2273331'
bibtex: '@article{Diederich_Iseke_Pull_Schneider_2023, title={Role (in-)congruity
and the Catch 22 for female executives: how stereotyping contributes to the gender
pay gap at top executive level}, DOI={10.1080/09585192.2023.2273331},
journal={The International Journal of Human Resource Management}, publisher={Informa
UK Limited}, author={Diederich, Sarah and Iseke, Anja and Pull, Kerstin and Schneider,
Martin}, year={2023}, pages={1–29} }'
chicago: 'Diederich, Sarah, Anja Iseke, Kerstin Pull, and Martin Schneider. “Role
(in-)Congruity and the Catch 22 for Female Executives: How Stereotyping Contributes
to the Gender Pay Gap at Top Executive Level.” The International Journal of
Human Resource Management, 2023, 1–29. https://doi.org/10.1080/09585192.2023.2273331.'
ieee: 'S. Diederich, A. Iseke, K. Pull, and M. Schneider, “Role (in-)congruity and
the Catch 22 for female executives: how stereotyping contributes to the gender
pay gap at top executive level,” The International Journal of Human Resource
Management, pp. 1–29, 2023, doi: 10.1080/09585192.2023.2273331.'
mla: 'Diederich, Sarah, et al. “Role (in-)Congruity and the Catch 22 for Female
Executives: How Stereotyping Contributes to the Gender Pay Gap at Top Executive
Level.” The International Journal of Human Resource Management, Informa
UK Limited, 2023, pp. 1–29, doi:10.1080/09585192.2023.2273331.'
short: S. Diederich, A. Iseke, K. Pull, M. Schneider, The International Journal
of Human Resource Management (2023) 1–29.
date_created: 2023-11-14T16:13:46Z
date_updated: 2023-11-14T16:13:52Z
doi: 10.1080/09585192.2023.2273331
keyword:
- Management of Technology and Innovation
- Organizational Behavior and Human Resource Management
- Strategy and Management
- Business and International Management
- Industrial relations
language:
- iso: eng
page: 1-29
publication: The International Journal of Human Resource Management
publication_identifier:
issn:
- 0958-5192
- 1466-4399
publication_status: published
publisher: Informa UK Limited
status: public
title: 'Role (in-)congruity and the Catch 22 for female executives: how stereotyping
contributes to the gender pay gap at top executive level'
type: journal_article
user_id: '471'
year: '2023'
...
---
_id: '49446'
author:
- first_name: Sarah
full_name: Diederich, Sarah
last_name: Diederich
- first_name: Anja
full_name: Iseke, Anja
last_name: Iseke
- first_name: Kerstin
full_name: Pull, Kerstin
last_name: Pull
- first_name: Martin
full_name: Schneider, Martin
id: '471'
last_name: Schneider
orcid: https://orcid.org/0000-0002-6961-3716
citation:
ama: 'Diederich S, Iseke A, Pull K, Schneider M. Role (in-)congruity and the Catch
22 for female executives: how stereotyping contributes to the gender pay gap at
top executive level. The International Journal of Human Resource Management.
Published online 2023:1-29. doi:10.1080/09585192.2023.2273331'
apa: 'Diederich, S., Iseke, A., Pull, K., & Schneider, M. (2023). Role (in-)congruity
and the Catch 22 for female executives: how stereotyping contributes to the gender
pay gap at top executive level. The International Journal of Human Resource
Management, 1–29. https://doi.org/10.1080/09585192.2023.2273331'
bibtex: '@article{Diederich_Iseke_Pull_Schneider_2023, title={Role (in-)congruity
and the Catch 22 for female executives: how stereotyping contributes to the gender
pay gap at top executive level}, DOI={10.1080/09585192.2023.2273331},
journal={The International Journal of Human Resource Management}, publisher={Informa
UK Limited}, author={Diederich, Sarah and Iseke, Anja and Pull, Kerstin and Schneider,
Martin}, year={2023}, pages={1–29} }'
chicago: 'Diederich, Sarah, Anja Iseke, Kerstin Pull, and Martin Schneider. “Role
(in-)Congruity and the Catch 22 for Female Executives: How Stereotyping Contributes
to the Gender Pay Gap at Top Executive Level.” The International Journal of
Human Resource Management, 2023, 1–29. https://doi.org/10.1080/09585192.2023.2273331.'
ieee: 'S. Diederich, A. Iseke, K. Pull, and M. Schneider, “Role (in-)congruity and
the Catch 22 for female executives: how stereotyping contributes to the gender
pay gap at top executive level,” The International Journal of Human Resource
Management, pp. 1–29, 2023, doi: 10.1080/09585192.2023.2273331.'
mla: 'Diederich, Sarah, et al. “Role (in-)Congruity and the Catch 22 for Female
Executives: How Stereotyping Contributes to the Gender Pay Gap at Top Executive
Level.” The International Journal of Human Resource Management, Informa
UK Limited, 2023, pp. 1–29, doi:10.1080/09585192.2023.2273331.'
short: S. Diederich, A. Iseke, K. Pull, M. Schneider, The International Journal
of Human Resource Management (2023) 1–29.
date_created: 2023-12-04T11:59:27Z
date_updated: 2023-12-04T12:05:49Z
department:
- _id: '19'
- _id: '185'
doi: 10.1080/09585192.2023.2273331
keyword:
- Management of Technology and Innovation
- Organizational Behavior and Human Resource Management
- Strategy and Management
- Business and International Management
- Industrial relations
language:
- iso: eng
page: 1-29
publication: The International Journal of Human Resource Management
publication_identifier:
issn:
- 0958-5192
- 1466-4399
publication_status: published
publisher: Informa UK Limited
status: public
title: 'Role (in-)congruity and the Catch 22 for female executives: how stereotyping
contributes to the gender pay gap at top executive level'
type: journal_article
user_id: '54657'
year: '2023'
...