[{"doi":"10.1103/cwsx-42c4","article_number":"034031","language":[{"iso":"eng"}],"publication_status":"published","date_updated":"2026-03-25T07:59:04Z","intvolume":" 25","year":"2026","title":"Toward integrated sensors for optimized optical coherence tomography with undetected photons","author":[{"first_name":"Franz","last_name":"Roeder","full_name":"Roeder, Franz","id":"88149"},{"id":"78890","first_name":"René","last_name":"Pollmann","full_name":"Pollmann, René"},{"last_name":"Quiring","first_name":"Viktor","full_name":"Quiring, Viktor"},{"full_name":"Eigner, Christof","last_name":"Eigner","orcid":"https://orcid.org/0000-0002-5693-3083","first_name":"Christof","id":"13244"},{"full_name":"Brecht, Benjamin","first_name":"Benjamin","last_name":"Brecht","orcid":"0000-0003-4140-0556 ","id":"27150"},{"id":"26263","last_name":"Silberhorn","first_name":"Christine","full_name":"Silberhorn, Christine"}],"publication_identifier":{"issn":["2331-7019"]},"type":"journal_article","department":[{"_id":"15"},{"_id":"623"},{"_id":"288"}],"date_created":"2026-03-23T12:28:33Z","abstract":[{"lang":"eng","text":"\r\n The development of practical sensors for optical coherence tomography (OCT) with undetected photons requires miniaturization via integration. To be practical, these sensors must exhibit a large spectral bandwidth and a high brightness, which are linked to a high axial resolution and a sufficient signal-to-noise ratio, respectively. Here, we combine these requirements in a scheme for OCT measurements with undetected photons based on nonlinear\r\n \r\n Ti\r\n :\r\n \r\n \r\n Li\r\n Nb\r\n O\r\n \r\n 3\r\n \r\n \r\n waveguides. We investigate the performance benchmarks of the commonly used SU(1,1) scheme in comparison to an induced-coherence scheme and find that the latter is actually better suited when implementing measurements with undetected photons in integrated systems. In both schemes, we perform pump-gain optimization and OCT measurements with undetected photons with an axial resolution as low as\r\n \r\n 28\r\n \r\n μ\r\n \r\n m\r\n \r\n \r\n .\r\n "}],"issue":"3","publication":"Physical Review Applied","user_id":"27150","volume":25,"publisher":"American Physical Society (APS)","_id":"65094","status":"public","citation":{"bibtex":"@article{Roeder_Pollmann_Quiring_Eigner_Brecht_Silberhorn_2026, title={Toward integrated sensors for optimized optical coherence tomography with undetected photons}, volume={25}, DOI={10.1103/cwsx-42c4}, number={3034031}, journal={Physical Review Applied}, publisher={American Physical Society (APS)}, author={Roeder, Franz and Pollmann, René and Quiring, Viktor and Eigner, Christof and Brecht, Benjamin and Silberhorn, Christine}, year={2026} }","ama":"Roeder F, Pollmann R, Quiring V, Eigner C, Brecht B, Silberhorn C. Toward integrated sensors for optimized optical coherence tomography with undetected photons. Physical Review Applied. 2026;25(3). doi:10.1103/cwsx-42c4","mla":"Roeder, Franz, et al. “Toward Integrated Sensors for Optimized Optical Coherence Tomography with Undetected Photons.” Physical Review Applied, vol. 25, no. 3, 034031, American Physical Society (APS), 2026, doi:10.1103/cwsx-42c4.","chicago":"Roeder, Franz, René Pollmann, Viktor Quiring, Christof Eigner, Benjamin Brecht, and Christine Silberhorn. “Toward Integrated Sensors for Optimized Optical Coherence Tomography with Undetected Photons.” Physical Review Applied 25, no. 3 (2026). https://doi.org/10.1103/cwsx-42c4.","short":"F. Roeder, R. Pollmann, V. Quiring, C. Eigner, B. Brecht, C. Silberhorn, Physical Review Applied 25 (2026).","ieee":"F. Roeder, R. Pollmann, V. Quiring, C. Eigner, B. Brecht, and C. Silberhorn, “Toward integrated sensors for optimized optical coherence tomography with undetected photons,” Physical Review Applied, vol. 25, no. 3, Art. no. 034031, 2026, doi: 10.1103/cwsx-42c4.","apa":"Roeder, F., Pollmann, R., Quiring, V., Eigner, C., Brecht, B., & Silberhorn, C. (2026). Toward integrated sensors for optimized optical coherence tomography with undetected photons. Physical Review Applied, 25(3), Article 034031. https://doi.org/10.1103/cwsx-42c4"}},{"date_created":"2026-03-25T07:43:24Z","type":"journal_article","department":[{"_id":"302"}],"publication":"Journal of Physics D: Applied Physics","citation":{"short":"A.C. Keller, V. Linko, Journal of Physics D: Applied Physics (2026).","chicago":"Keller, Adrian Clemens, and Veikko Linko. “Molecular Lithography with DNA Nanostructures: Methods and Applications.” Journal of Physics D: Applied Physics, 2026. https://doi.org/10.1088/1361-6463/ae5667.","ieee":"A. C. Keller and V. Linko, “Molecular lithography with DNA nanostructures: Methods and applications,” Journal of Physics D: Applied Physics, 2026, doi: 10.1088/1361-6463/ae5667.","apa":"Keller, A. C., & Linko, V. (2026). Molecular lithography with DNA nanostructures: Methods and applications. Journal of Physics D: Applied Physics. https://doi.org/10.1088/1361-6463/ae5667","bibtex":"@article{Keller_Linko_2026, title={Molecular lithography with DNA nanostructures: Methods and applications}, DOI={10.1088/1361-6463/ae5667}, journal={Journal of Physics D: Applied Physics}, publisher={IOP Publishing}, author={Keller, Adrian Clemens and Linko, Veikko}, year={2026} }","ama":"Keller AC, Linko V. Molecular lithography with DNA nanostructures: Methods and applications. Journal of Physics D: Applied Physics. Published online 2026. doi:10.1088/1361-6463/ae5667","mla":"Keller, Adrian Clemens, and Veikko Linko. “Molecular Lithography with DNA Nanostructures: Methods and Applications.” Journal of Physics D: Applied Physics, IOP Publishing, 2026, doi:10.1088/1361-6463/ae5667."},"abstract":[{"text":"Abstract\r\n Lithographic surface patterning is a cornerstone of modern materials and device fabrication. Although the available lithography techniques are constantly being advanced to push the feature sizes down to the few-nanometer scale, such developments are associated with many technological and economic challenges. Combining established top-down lithography with bottom-up self-assembly strategies has the potential to overcome those challenges and enable the manipulation of matter with molecular precision. One of the most exciting approaches in this regard is to harness the programmability of DNA self-assembly to create precise DNA nanostructure masks to be used in the lithographic patterning of diverse substrates. DNA nanotechnology has provided us with a versatile toolbox for the high-yield synthesis of 2D and 3D nanostructures with complex, user-defined shapes at unprecedented molecular accuracy. Consequently, the last decade has seen intense research efforts aimed at transferring such DNA nanostructure shapes into functional organic and inorganic materials and we have now arrived at a point where sophisticated molecular lithography approaches utilize DNA nanostructure masks for the fabrication of plasmonic surfaces for metamaterials and sensing applications. This review summarizes how the spatial information of such DNA nanostructure masks can be transferred into various organic and inorganic materials through selective etching and deposition steps. The review also discusses recent developments toward all-purpose molecular lithography schemes and highlights promising extensions of the discussed methods toward new materials systems and application fields.","lang":"eng"}],"_id":"65108","publisher":"IOP Publishing","language":[{"iso":"eng"}],"user_id":"48864","doi":"10.1088/1361-6463/ae5667","year":"2026","title":"Molecular lithography with DNA nanostructures: Methods and applications","status":"public","author":[{"id":"48864","first_name":"Adrian Clemens","orcid":"0000-0001-7139-3110","last_name":"Keller","full_name":"Keller, Adrian Clemens"},{"full_name":"Linko, Veikko","first_name":"Veikko","last_name":"Linko"}],"publication_identifier":{"issn":["0022-3727","1361-6463"]},"publication_status":"published","date_updated":"2026-03-25T07:44:52Z"},{"place":"Tampere, Finland","date_created":"2026-03-27T15:20:54Z","type":"conference","keyword":["Join Queries","Acyclic Queries","Query Processing"],"oa":"1","department":[{"_id":"888"}],"publication":"Proceedings of the 28th International Workshop on Design, Optimization, Languages and Analytical Processing of Big Data (DOLAP 2026)","citation":{"mla":"Böhm, Daniela, et al. “Selective Use of Yannakakis’ Algorithm for Consistent Performance Gains.” Proceedings of the 28th International Workshop on Design, Optimization, Languages and Analytical Processing of Big Data (DOLAP 2026), 2026.","bibtex":"@inproceedings{Böhm_Gottlob_Lanzinger_Longo_Okulmus_Pichler_Selzer_2026, place={Tampere, Finland}, title={Selective Use of Yannakakis’ Algorithm for Consistent Performance Gains}, booktitle={Proceedings of the 28th International Workshop on Design, Optimization, Languages and Analytical Processing of Big Data (DOLAP 2026)}, author={Böhm, Daniela and Gottlob, Georg and Lanzinger, Matthias and Longo, Davide Mario and Okulmus, Cem and Pichler, Reinhard and Selzer, Alexander}, year={2026} }","ama":"Böhm D, Gottlob G, Lanzinger M, et al. Selective Use of Yannakakis’ Algorithm for Consistent Performance Gains. In: Proceedings of the 28th International Workshop on Design, Optimization, Languages and Analytical Processing of Big Data (DOLAP 2026). ; 2026.","ieee":"D. Böhm et al., “Selective Use of Yannakakis’ Algorithm for Consistent Performance Gains,” 2026.","apa":"Böhm, D., Gottlob, G., Lanzinger, M., Longo, D. M., Okulmus, C., Pichler, R., & Selzer, A. (2026). Selective Use of Yannakakis’ Algorithm for Consistent Performance Gains. Proceedings of the 28th International Workshop on Design, Optimization, Languages and Analytical Processing of Big Data (DOLAP 2026).","short":"D. Böhm, G. Gottlob, M. Lanzinger, D.M. Longo, C. Okulmus, R. Pichler, A. Selzer, in: Proceedings of the 28th International Workshop on Design, Optimization, Languages and Analytical Processing of Big Data (DOLAP 2026), Tampere, Finland, 2026.","chicago":"Böhm, Daniela, Georg Gottlob, Matthias Lanzinger, Davide Mario Longo, Cem Okulmus, Reinhard Pichler, and Alexander Selzer. “Selective Use of Yannakakis’ Algorithm for Consistent Performance Gains.” In Proceedings of the 28th International Workshop on Design, Optimization, Languages and Analytical Processing of Big Data (DOLAP 2026). Tampere, Finland, 2026."},"abstract":[{"text":"Large intermediate results can cause join queries to run unexpectedly long. This problem is particularly common for analytical queries, which aggregate data over many tables to produce a comparatively small final output, and queries on graph data, where intermediate results blow up quickly. Recent work inspired by Yannakakis’ algorithm approaches this by modifying the query engine to avoid materializing unnecessary tuples. However, this requires significant changes to the core of the system, which is not feasible in many situations such as cloud environments or proprietary systems.\r\nIn this work, we propose a flexible approach for optimizing long-running join queries from the outside of the DBMS. Rewriting-based realizations of Yannakakis’ algorithm suffer from inherent overhead due to the creation of intermediate tables. Thus, we present an approach for detecting and targeting queries which would benefit from a Yannakakis-style optimization. We introduce a new benchmark combining 5 standard benchmarks and augmenting them with additional instances, which provides a sufficient size and diversity for a machine learning based solution. On PostgreSQL, DuckDB and SparkSQL, slowdowns on queries where the rewriting is counterproductive are mostly avoided, as opposed to a naïve application of the rewriting, and we observe significant improvements in end-to-end runtimes over standard query execution and unconditional rewriting.","lang":"eng"}],"main_file_link":[{"open_access":"1","url":"https://ceur-ws.org/Vol-4186/paper2.pdf"}],"_id":"65178","language":[{"iso":"eng"}],"user_id":"114410","title":"Selective Use of Yannakakis’ Algorithm for Consistent Performance Gains","year":"2026","status":"public","author":[{"full_name":"Böhm, Daniela","last_name":"Böhm","first_name":"Daniela"},{"full_name":"Gottlob, Georg","first_name":"Georg","last_name":"Gottlob"},{"last_name":"Lanzinger","first_name":"Matthias","full_name":"Lanzinger, Matthias"},{"last_name":"Longo","first_name":"Davide Mario","full_name":"Longo, Davide Mario"},{"full_name":"Okulmus, Cem","orcid":"0000-0002-7742-0439","last_name":"Okulmus","first_name":"Cem","id":"114410"},{"first_name":"Reinhard","last_name":"Pichler","full_name":"Pichler, Reinhard"},{"full_name":"Selzer, Alexander","last_name":"Selzer","first_name":"Alexander"}],"date_updated":"2026-03-27T15:22:01Z"},{"quality_controlled":"1","citation":{"ieee":"A. Börger, R. Mahnken, I. Caylak, and R. Ostwald, “Aspects of Parameter Identification for a Micromorphic Continuum applied to a Cold‐Box Sand,” Proceedings in Applied Mathematics and Mechanics, vol. 26, no. 2, Art. no. e70093, 2026, doi: 10.1002/pamm.70093.","apa":"Börger, A., Mahnken, R., Caylak, I., & Ostwald, R. (2026). Aspects of Parameter Identification for a Micromorphic Continuum applied to a Cold‐Box Sand. Proceedings in Applied Mathematics and Mechanics, 26(2), Article e70093. https://doi.org/10.1002/pamm.70093","short":"A. Börger, R. Mahnken, I. Caylak, R. Ostwald, Proceedings in Applied Mathematics and Mechanics 26 (2026).","chicago":"Börger, Alexander, Rolf Mahnken, Ismail Caylak, and Richard Ostwald. “Aspects of Parameter Identification for a Micromorphic Continuum Applied to a Cold‐Box Sand.” Proceedings in Applied Mathematics and Mechanics 26, no. 2 (2026). https://doi.org/10.1002/pamm.70093.","mla":"Börger, Alexander, et al. “Aspects of Parameter Identification for a Micromorphic Continuum Applied to a Cold‐Box Sand.” Proceedings in Applied Mathematics and Mechanics, vol. 26, no. 2, e70093, Wiley, 2026, doi:10.1002/pamm.70093.","bibtex":"@article{Börger_Mahnken_Caylak_Ostwald_2026, title={Aspects of Parameter Identification for a Micromorphic Continuum applied to a Cold‐Box Sand}, volume={26}, DOI={10.1002/pamm.70093}, number={2e70093}, journal={Proceedings in Applied Mathematics and Mechanics}, publisher={Wiley}, author={Börger, Alexander and Mahnken, Rolf and Caylak, Ismail and Ostwald, Richard}, year={2026} }","ama":"Börger A, Mahnken R, Caylak I, Ostwald R. Aspects of Parameter Identification for a Micromorphic Continuum applied to a Cold‐Box Sand. Proceedings in Applied Mathematics and Mechanics. 2026;26(2). doi:10.1002/pamm.70093"},"user_id":"85414","volume":26,"publisher":"Wiley","_id":"65266","status":"public","type":"journal_article","department":[{"_id":"9"},{"_id":"952"},{"_id":"321"}],"date_created":"2026-04-01T04:52:34Z","abstract":[{"text":"ABSTRACT\r\n This work is concerned with the modeling of a cold‐box sand, a composition of sand grains and a resin binder. To this end, experiments are performed, which show the following characteristics: localization phenomena in the form of a shear band, softening behavior in the force‐displacement curve, and asymmetric behavior for compression and tension. To model this complex material behavior, a micromorphic continuum is used. In the present contribution, we focus on the linear‐elastic regime and demonstrate the identifiability of micromorphic material parameters under deliberately induced inhomogeneous deformation states. In addition to the degrees of freedom of a classical continuum, the micromorphic model has additional degrees of freedom, introduced here in a phenomenological sense to represent kinematically enriched deformation modes associated with the granular microstructure. Accordingly, the micromorphic fields are not interpreted as a separate physical scale (e.g., “binder” vs. “grains”), but as an effective continuum description at the specimen scale. This contribution addresses parameter identification for a micromorphic model of cold‐box sand, with a clear separation between homogeneous deformation states governing classical elastic parameters and inhomogeneous states required to activate and identify micromorphic length‐scale parameters. The main challenge lies in identifying the micro material parameters. To determine these, the corresponding gradient terms in the constitutive formulation must be triggered via properly tuned experiments. Micro‐parameter identification is demonstrated using synthetic data generated from a boundary‐value problem with inhomogeneous displacement fields. The chosen benchmark enables controlled activation of gradient terms and thereby renders optimization‐based identification of micromorphic parameters feasible. The synthetic example is deliberately chosen to assess feasibility and identifiability under controlled conditions, thereby isolating micromorphic identifiability aspects from experimental uncertainties. The novelty of the contribution lies in explicitly linking micromorphic parameter identifiability to kinematic inhomogeneity, and in demonstrating this link within a tractable forward– inverse setting for a linear‐elastic micromorphic continuum.","lang":"eng"}],"publication":"Proceedings in Applied Mathematics and Mechanics","issue":"2","doi":"10.1002/pamm.70093","article_number":"e70093","language":[{"iso":"eng"}],"date_updated":"2026-04-01T04:54:17Z","publication_status":"published","intvolume":" 26","title":"Aspects of Parameter Identification for a Micromorphic Continuum applied to a Cold‐Box Sand","year":"2026","publication_identifier":{"issn":["1617-7061","1617-7061"]},"author":[{"full_name":"Börger, Alexander","last_name":"Börger","first_name":"Alexander","id":"52037"},{"full_name":"Mahnken, Rolf","first_name":"Rolf","last_name":"Mahnken"},{"first_name":"Ismail","last_name":"Caylak","full_name":"Caylak, Ismail","id":"75"},{"first_name":"Richard","orcid":"0000-0003-2147-8444","last_name":"Ostwald","full_name":"Ostwald, Richard","id":"106876"}]},{"language":[{"iso":"eng"}],"_id":"61152","doi":"10.1145/3807510","user_id":"55631","publication_identifier":{"issn":["1936-7406"]},"author":[{"full_name":"Umuroglu, Yaman","last_name":"Umuroglu","first_name":"Yaman"},{"id":"98854","full_name":"Berganski, Christoph","first_name":"Christoph","last_name":"Berganski"},{"id":"55631","full_name":"Jentzsch, Felix","first_name":"Felix","orcid":"0000-0003-4987-5708","last_name":"Jentzsch"},{"full_name":"Danilowicz, Michal","last_name":"Danilowicz","first_name":"Michal"},{"full_name":"Kryjak, Tomasz","last_name":"Kryjak","first_name":"Tomasz"},{"last_name":"Bezaitis","first_name":"Charalampos","full_name":"Bezaitis, Charalampos"},{"first_name":"Magnus","last_name":"Sjalander","full_name":"Sjalander, Magnus"},{"full_name":"Colbert, Ian","first_name":"Ian","last_name":"Colbert"},{"last_name":"Preusser","first_name":"Thomas","full_name":"Preusser, Thomas"},{"full_name":"Petri-Koenig, Jakoba","first_name":"Jakoba","last_name":"Petri-Koenig"},{"last_name":"Blott","first_name":"Michaela","full_name":"Blott, Michaela"}],"status":"public","title":"SIRA: Scaled-Integer Range Analysis for Optimizing FPGA Dataflow Neural Network Accelerators","year":"2026","date_updated":"2026-04-27T14:13:50Z","publication_status":"submitted","date_created":"2025-09-08T14:10:39Z","department":[{"_id":"78"}],"type":"journal_article","citation":{"apa":"Umuroglu, Y., Berganski, C., Jentzsch, F., Danilowicz, M., Kryjak, T., Bezaitis, C., Sjalander, M., Colbert, I., Preusser, T., Petri-Koenig, J., & Blott, M. (n.d.). SIRA: Scaled-Integer Range Analysis for Optimizing FPGA Dataflow Neural Network Accelerators. ACM Transactions on Reconfigurable Technology and Systems. https://doi.org/10.1145/3807510","ieee":"Y. Umuroglu et al., “SIRA: Scaled-Integer Range Analysis for Optimizing FPGA Dataflow Neural Network Accelerators,” ACM Transactions on Reconfigurable Technology and Systems, doi: 10.1145/3807510.","short":"Y. Umuroglu, C. Berganski, F. Jentzsch, M. Danilowicz, T. Kryjak, C. Bezaitis, M. Sjalander, I. Colbert, T. Preusser, J. Petri-Koenig, M. Blott, ACM Transactions on Reconfigurable Technology and Systems (n.d.).","chicago":"Umuroglu, Yaman, Christoph Berganski, Felix Jentzsch, Michal Danilowicz, Tomasz Kryjak, Charalampos Bezaitis, Magnus Sjalander, et al. “SIRA: Scaled-Integer Range Analysis for Optimizing FPGA Dataflow Neural Network Accelerators.” ACM Transactions on Reconfigurable Technology and Systems, n.d. https://doi.org/10.1145/3807510.","mla":"Umuroglu, Yaman, et al. “SIRA: Scaled-Integer Range Analysis for Optimizing FPGA Dataflow Neural Network Accelerators.” ACM Transactions on Reconfigurable Technology and Systems, doi:10.1145/3807510.","ama":"Umuroglu Y, Berganski C, Jentzsch F, et al. SIRA: Scaled-Integer Range Analysis for Optimizing FPGA Dataflow Neural Network Accelerators. ACM Transactions on Reconfigurable Technology and Systems. doi:10.1145/3807510","bibtex":"@article{Umuroglu_Berganski_Jentzsch_Danilowicz_Kryjak_Bezaitis_Sjalander_Colbert_Preusser_Petri-Koenig_et al., title={SIRA: Scaled-Integer Range Analysis for Optimizing FPGA Dataflow Neural Network Accelerators}, DOI={10.1145/3807510}, journal={ACM Transactions on Reconfigurable Technology and Systems}, author={Umuroglu, Yaman and Berganski, Christoph and Jentzsch, Felix and Danilowicz, Michal and Kryjak, Tomasz and Bezaitis, Charalampos and Sjalander, Magnus and Colbert, Ian and Preusser, Thomas and Petri-Koenig, Jakoba and et al.} }"},"publication":"ACM Transactions on Reconfigurable Technology and Systems","project":[{"name":"Computing Resources Provided by the Paderborn Center for Parallel Computing","_id":"52"}],"abstract":[{"lang":"eng","text":"While neural network quantization effectively reduces the cost of matrix multiplications, aggressive quantization can expose non-matrix-multiply operations as significant performance and resource bottlenecks on embedded systems. Addressing such bottlenecks requires a comprehensive approach to tailoring the precision across operations in the inference computation. To this end, we introduce scaled-integer range analysis (SIRA), a static analysis technique employing interval arithmetic to determine the range, scale, and bias for tensors in quantized neural networks. We show how this information can be exploited to reduce the resource footprint of FPGA dataflow neural network accelerators via tailored bitwidth adaptation for accumulators and downstream operations, aggregation of scales and biases, and conversion of consecutive elementwise operations to thresholding operations. We integrate SIRA-driven optimizations into the open-source FINN framework, then evaluate their effectiveness across a range of quantized neural network workloads and compare implementation alternatives for non-matrix-multiply operations. We demonstrate an average reduction of 17\\% for LUTs, 66\\% for DSPs, and 22\\% for accumulator bitwidths with SIRA optimizations, providing detailed benchmark analysis and analytical models to guide the implementation style for non-matrix layers. Finally, we open-source SIRA to facilitate community exploration of its benefits across various applications and hardware platforms."}]},{"language":[{"iso":"eng"}],"series_title":"Smart Technologies for an All-Electric Society","doi":"10.1007/978-3-032-07319-8_19","title":"Designing and Evaluating the Usability and Onboarding for a Mixed-Reality Application: A Case Study with PEARL (Paderborn Electrical Engineering AR Laboratory) and Meta Quest 3","year":"2026","publication_identifier":{"isbn":["9783032073181","9783032073198"],"issn":["2367-3370","2367-3389"]},"author":[{"full_name":"Alptekin, Mesut","last_name":"Alptekin","first_name":"Mesut","orcid":"0009-0004-8545-1165","id":"11763"},{"first_name":"Daniel","last_name":"Münstermann","full_name":"Münstermann, Daniel"},{"first_name":"Katrin","last_name":"Temmen","full_name":"Temmen, Katrin"}],"date_updated":"2026-04-29T09:23:02Z","publication_status":"published","intvolume":" 2","date_created":"2026-04-29T09:12:41Z","keyword":["Meta Quest 3","Augmented Reality","Mixed Reality","PEARL","Electrical Engineering","Laboratory Training","Onboarding","User Experience","User Interface","Heuristics"],"type":"book_chapter","department":[{"_id":"34"},{"_id":"3"},{"_id":"300"}],"publication":"Lecture Notes in Networks and Systems","abstract":[{"text":"Abstract This study explores the usability and onboarding process of a Mixed Reality (MR) application called PEARL, designed to prepare students for laboratory work. Originally developed for mobile Augmented Reality (mAR), PEARL was adapted for MR to offer a more immersive and intuitive experience through hand and gesture controls. Since many students lack experience with MR devices, a user-friendly onboarding system is essential. The study aims to redesign PEARL’s user interface and onboarding experience, evaluating how intuitive interaction elements impact usability. First, a literature review will identify existing usability guidelines for MR applications, which will guide the redesign of the interface. This new version will then be tested with students through a user study. Feedback will be collected via an online survey to assess the onboarding and user experience, and the findings will be used to refine the design further. The expected outcome is an improved onboarding process and interface, making PEARL accessible even for MR novices, enhancing their ability to interact with 3D objects in a real-world setting. Ultimately, the study aims to provide best practices for developing intuitive MR interfaces and effective onboarding experiences, especially in educational contexts.","lang":"eng"}],"page":"199-211","_id":"65515","publisher":"Springer Nature Switzerland","user_id":"11763","volume":2,"status":"public","conference":{"end_date":"2025-04-11","start_date":"2025-04-09","name":"International Conference on Smart Technologies & Education (STE2025)","location":"Santiago, Chile"},"place":"Cham","citation":{"apa":"Alptekin, M., Münstermann, D., & Temmen, K. (2026). Designing and Evaluating the Usability and Onboarding for a Mixed-Reality Application: A Case Study with PEARL (Paderborn Electrical Engineering AR Laboratory) and Meta Quest 3. In Lecture Notes in Networks and Systems (Vol. 2, pp. 199–211). Springer Nature Switzerland. https://doi.org/10.1007/978-3-032-07319-8_19","ieee":"M. Alptekin, D. Münstermann, and K. Temmen, “Designing and Evaluating the Usability and Onboarding for a Mixed-Reality Application: A Case Study with PEARL (Paderborn Electrical Engineering AR Laboratory) and Meta Quest 3,” in Lecture Notes in Networks and Systems, vol. 2, Cham: Springer Nature Switzerland, 2026, pp. 199–211.","short":"M. Alptekin, D. Münstermann, K. Temmen, in: Lecture Notes in Networks and Systems, Springer Nature Switzerland, Cham, 2026, pp. 199–211.","chicago":"Alptekin, Mesut, Daniel Münstermann, and Katrin Temmen. “Designing and Evaluating the Usability and Onboarding for a Mixed-Reality Application: A Case Study with PEARL (Paderborn Electrical Engineering AR Laboratory) and Meta Quest 3.” In Lecture Notes in Networks and Systems, 2:199–211. Smart Technologies for an All-Electric Society. Cham: Springer Nature Switzerland, 2026. https://doi.org/10.1007/978-3-032-07319-8_19.","mla":"Alptekin, Mesut, et al. “Designing and Evaluating the Usability and Onboarding for a Mixed-Reality Application: A Case Study with PEARL (Paderborn Electrical Engineering AR Laboratory) and Meta Quest 3.” Lecture Notes in Networks and Systems, vol. 2, Springer Nature Switzerland, 2026, pp. 199–211, doi:10.1007/978-3-032-07319-8_19.","ama":"Alptekin M, Münstermann D, Temmen K. Designing and Evaluating the Usability and Onboarding for a Mixed-Reality Application: A Case Study with PEARL (Paderborn Electrical Engineering AR Laboratory) and Meta Quest 3. In: Lecture Notes in Networks and Systems. Vol 2. Smart Technologies for an All-Electric Society. Springer Nature Switzerland; 2026:199-211. doi:10.1007/978-3-032-07319-8_19","bibtex":"@inbook{Alptekin_Münstermann_Temmen_2026, place={Cham}, series={Smart Technologies for an All-Electric Society}, title={Designing and Evaluating the Usability and Onboarding for a Mixed-Reality Application: A Case Study with PEARL (Paderborn Electrical Engineering AR Laboratory) and Meta Quest 3}, volume={2}, DOI={10.1007/978-3-032-07319-8_19}, booktitle={Lecture Notes in Networks and Systems}, publisher={Springer Nature Switzerland}, author={Alptekin, Mesut and Münstermann, Daniel and Temmen, Katrin}, year={2026}, pages={199–211}, collection={Smart Technologies for an All-Electric Society} }"}},{"publisher":"Springer Science and Business Media LLC","_id":"61441","user_id":"11674","status":"public","oa":"1","citation":{"bibtex":"@article{Homt_Bloh_Wehde_2026, title={Perspektiven angehender Lehrkräfte auf Forschendes Lernen – eine qualitative Längsschnittstudie im Referendariat und Berufseinstieg}, DOI={10.1007/s35834-025-00506-4}, journal={Zeitschrift für Bildungsforschung}, publisher={Springer Science and Business Media LLC}, author={Homt, Martina and Bloh, Bea and Wehde, Janis}, year={2026} }","ama":"Homt M, Bloh B, Wehde J. Perspektiven angehender Lehrkräfte auf Forschendes Lernen – eine qualitative Längsschnittstudie im Referendariat und Berufseinstieg. Zeitschrift für Bildungsforschung. Published online 2026. doi:10.1007/s35834-025-00506-4","mla":"Homt, Martina, et al. “Perspektiven angehender Lehrkräfte auf Forschendes Lernen – eine qualitative Längsschnittstudie im Referendariat und Berufseinstieg.” Zeitschrift für Bildungsforschung, Springer Science and Business Media LLC, 2026, doi:10.1007/s35834-025-00506-4.","short":"M. Homt, B. Bloh, J. Wehde, Zeitschrift für Bildungsforschung (2026).","chicago":"Homt, Martina, Bea Bloh, and Janis Wehde. “Perspektiven angehender Lehrkräfte auf Forschendes Lernen – eine qualitative Längsschnittstudie im Referendariat und Berufseinstieg.” Zeitschrift für Bildungsforschung, 2026. https://doi.org/10.1007/s35834-025-00506-4.","ieee":"M. Homt, B. Bloh, and J. Wehde, “Perspektiven angehender Lehrkräfte auf Forschendes Lernen – eine qualitative Längsschnittstudie im Referendariat und Berufseinstieg,” Zeitschrift für Bildungsforschung, 2026, doi: 10.1007/s35834-025-00506-4.","apa":"Homt, M., Bloh, B., & Wehde, J. (2026). Perspektiven angehender Lehrkräfte auf Forschendes Lernen – eine qualitative Längsschnittstudie im Referendariat und Berufseinstieg. Zeitschrift für Bildungsforschung. https://doi.org/10.1007/s35834-025-00506-4"},"quality_controlled":"1","main_file_link":[{"open_access":"1","url":"https://doi.org/10.1007/s35834-025-00506-4"}],"language":[{"iso":"ger"}],"doi":"10.1007/s35834-025-00506-4","alternative_title":["Perspectives of prospective teachers on research-based learning—a qualitative longitudinal study during teacher training and career entry"],"title":"Perspektiven angehender Lehrkräfte auf Forschendes Lernen – eine qualitative Längsschnittstudie im Referendariat und Berufseinstieg","year":"2026","author":[{"id":"11674","last_name":"Homt","first_name":"Martina","full_name":"Homt, Martina"},{"full_name":"Bloh, Bea","first_name":"Bea","last_name":"Bloh","id":"69910"},{"full_name":"Wehde, Janis","first_name":"Janis","last_name":"Wehde","orcid":"0009-0008-0720-7828","id":"82257"}],"publication_identifier":{"issn":["2190-6890","2190-6904"]},"date_updated":"2026-05-13T11:04:50Z","publication_status":"published","date_created":"2025-09-25T08:41:00Z","type":"journal_article","department":[{"_id":"456"},{"_id":"43"}],"publication":"Zeitschrift für Bildungsforschung","abstract":[{"text":"Das hochschuldidaktische Konzept des Forschenden Lernens gilt als zentrales Element der universitären Lehrkräftebildung in Deutschland und ist in fast allen Bundesländern Bestandteil des Praxissemesters. Damit einhergehende Erwartungen im Hinblick auf den Professionalisierungsprozess von Lehrkräften fokussieren insbesondere die Vermittlung einer forschenden Grundhaltung, die auf eine nicht-wissenschaftsferne Berufsausübung abzielt. Wir fassen die forschende Grundhaltung als Professionsüberzeugung, die aus einer kognitiven, affektiven und handlungsbezogenen Komponente besteht und untersuchen die Komponenten im Zusammenspiel sowie im Längsschnitt.\r\n Mittels teilstrukturierter Interviews mit 22 angehenden Lehrkräften im Referendariat und Berufseinstieg, die sich im Praxissemester mit Forschendem Lernen befasst haben, werden das Verständnis (kognitive Komponente) und die Bedeutsamkeit (affektive und handlungsbezogene Komponente) Forschenden Lernens in der jeweiligen Ausbildungs- bzw. Berufsphase erfragt. Die Daten werden inhaltsanalytisch sowie typenbildend ausgewertet, um das Verständnis und die Bedeutsamkeit in der jeweiligen Phase, längsschnittliche Entwicklungen sowie das Verhältnis von Verständnis und Bedeutsamkeit herauszuarbeiten. Die Befunde zeigen, dass die Verständnisse von Forschendem Lernen sowohl im Referendariat als auch im Berufseinstieg variieren. Zudem ist das Konzept – laut Schilderungen der Befragten – durchaus bedeutsam für ihre Lern- und Handlungspraxis, jedoch nicht für alle und in unterschiedlich ausgeprägter Form. Die Typenbildung verdeutlicht, dass die fehlende Bedeutsamkeit Forschenden Lernens mit Fehlkonzepten einhergeht und eine höhere Bedeutsamkeit erkennbar ist, wenn Adaptionsleistungen hinsichtlich des Konzepts vorgenommen werden. Insgesamt ist im Sinne der Auffassung als Professionsüberzeugung die Anbahnung einer forschenden Grundhaltung bei einigen Befragten erkennbar. Implikationen für eine künftige Hochschulbildung ergeben sich u. a. mit Blick auf die Unterstützung von Studierenden bei Adaptionsleistungen für die (jeweilige) Praxis.","lang":"ger"}]},{"date_updated":"2026-05-20T08:45:27Z","year":"2026","title":"Cells on Autopilot: Adaptive Cell (Re)Selection via Reinforcement Learning","status":"public","author":[{"id":"44169","orcid":"0009-0007-2992-8346","last_name":"Illian","first_name":"Marvin","full_name":"Illian, Marvin"},{"full_name":"Khalili, Ramin","last_name":"Khalili","first_name":"Ramin"},{"full_name":"A. de A. Rocha, Antonio","first_name":"Antonio","last_name":"A. de A. Rocha"},{"id":"102868","last_name":"Wang","orcid":"0000-0001-7181-6128","first_name":"Lin","full_name":"Wang, Lin"}],"user_id":"44169","language":[{"iso":"eng"}],"_id":"65013","publisher":"IFIP","quality_controlled":"1","publication":"2026 24th International Symposium on Modeling and Optimization in Mobile, Ad Hoc, and Wireless Networks (WiOpt)","citation":{"apa":"Illian, M., Khalili, R., A. de A. Rocha, A., & Wang, L. (2026). Cells on Autopilot: Adaptive Cell (Re)Selection via Reinforcement Learning. 2026 24th International Symposium on Modeling and Optimization in Mobile, Ad Hoc, and Wireless Networks (WiOpt).","ieee":"M. Illian, R. Khalili, A. A. de A. Rocha, and L. Wang, “Cells on Autopilot: Adaptive Cell (Re)Selection via Reinforcement Learning,” 2026.","short":"M. Illian, R. Khalili, A. A. de A. Rocha, L. Wang, in: 2026 24th International Symposium on Modeling and Optimization in Mobile, Ad Hoc, and Wireless Networks (WiOpt), IFIP, 2026.","chicago":"Illian, Marvin, Ramin Khalili, Antonio A. de A. Rocha, and Lin Wang. “Cells on Autopilot: Adaptive Cell (Re)Selection via Reinforcement Learning.” In 2026 24th International Symposium on Modeling and Optimization in Mobile, Ad Hoc, and Wireless Networks (WiOpt). IFIP, 2026.","mla":"Illian, Marvin, et al. “Cells on Autopilot: Adaptive Cell (Re)Selection via Reinforcement Learning.” 2026 24th International Symposium on Modeling and Optimization in Mobile, Ad Hoc, and Wireless Networks (WiOpt), IFIP, 2026.","ama":"Illian M, Khalili R, A. de A. Rocha A, Wang L. Cells on Autopilot: Adaptive Cell (Re)Selection via Reinforcement Learning. In: 2026 24th International Symposium on Modeling and Optimization in Mobile, Ad Hoc, and Wireless Networks (WiOpt). IFIP; 2026.","bibtex":"@inproceedings{Illian_Khalili_A. de A. Rocha_Wang_2026, title={Cells on Autopilot: Adaptive Cell (Re)Selection via Reinforcement Learning}, booktitle={2026 24th International Symposium on Modeling and Optimization in Mobile, Ad Hoc, and Wireless Networks (WiOpt)}, publisher={IFIP}, author={Illian, Marvin and Khalili, Ramin and A. de A. Rocha, Antonio and Wang, Lin}, year={2026} }"},"type":"conference","department":[{"_id":"75"}],"date_created":"2026-03-16T14:46:45Z"},{"date_created":"2023-05-25T14:42:35Z","type":"journal_article","department":[{"_id":"299"}],"publication":"MNU Journal","citation":{"ieee":"Y. Webersen and F. Daud, “Was steckt drin? Blackboxen aus dem 3D-Drucker für den Mechanikunterricht der Oberstufe,” MNU Journal.","apa":"Webersen, Y., & Daud, F. (n.d.). Was steckt drin? Blackboxen aus dem 3D-Drucker für den Mechanikunterricht der Oberstufe. MNU Journal.","chicago":"Webersen, Yvonne, and Fardien Daud. “Was steckt drin? Blackboxen aus dem 3D-Drucker für den Mechanikunterricht der Oberstufe.” MNU Journal, n.d.","short":"Y. Webersen, F. Daud, MNU Journal (n.d.).","mla":"Webersen, Yvonne, and Fardien Daud. “Was steckt drin? Blackboxen aus dem 3D-Drucker für den Mechanikunterricht der Oberstufe.” MNU Journal.","bibtex":"@article{Webersen_Daud, title={Was steckt drin? Blackboxen aus dem 3D-Drucker für den Mechanikunterricht der Oberstufe}, journal={MNU Journal}, author={Webersen, Yvonne and Daud, Fardien} }","ama":"Webersen Y, Daud F. Was steckt drin? Blackboxen aus dem 3D-Drucker für den Mechanikunterricht der Oberstufe. MNU Journal."},"_id":"45284","language":[{"iso":"ger"}],"user_id":"9605","title":"Was steckt drin? Blackboxen aus dem 3D-Drucker für den Mechanikunterricht der Oberstufe","year":"2026","status":"public","author":[{"full_name":"Webersen, Yvonne","orcid":"0009-0009-6583-8692","last_name":"Webersen","first_name":"Yvonne","id":"9605"},{"full_name":"Daud, Fardien","first_name":"Fardien","last_name":"Daud"}],"publication_status":"accepted","date_updated":"2026-05-21T12:29:01Z"},{"abstract":[{"lang":"eng","text":"The reduction of CO2-emissions in the chemical industry is essential to meet European climate targets. Particularly, the reliance on fossil fuels for process heat supply is a key factor for CO2-emissions. Electrically driven compression heat pumps are a promising option to reduce fossil fuel consumption by upgrading low-temperature waste heat to a higher temperature level, provided that low-carbon electricity is available. However, the integration of heat pumps into chemical utility systems remains a challenge due to economic constraints and the high complexity associated with site-wide heat integration and retrofit of existing structures. This work presents a mixed-integer linear programming (MILP) approach for the optimization of utility systems with integrated heat pumps. To address computational complexity, candidate utility temperature levels are pre-selected, and feasible heat pump coefficients of performance (COP) are precomputed. The framework is applied to both greenfield and retrofit scenarios for a synthetic case study consisting of 400 process streams. In the greenfield scenario, optimal utility temperature levels and heat pump integration configurations are identified. For the retrofit scenario, temperature levels of an existing utility system are modified to reduce total annual costs (TAC). Additionally, sensitivity analysis is conducted to assess the influence of key economic and environmental parameters. The presented case studies demonstrate short solution times, highlighting the suitability of the proposed framework for screening studies and systematic sensitivity analyses in early-stage design and retrofit applications."}],"publication":"Systems and Control Transactions","type":"conference","department":[{"_id":"831"}],"date_created":"2026-06-22T11:32:30Z","publication_status":"published","date_updated":"2026-06-22T11:33:05Z","intvolume":" 6","year":"2026","title":"Optimization of Site-wide Heat-Integrated Utility Systems with Heat Pumps using MILP","author":[{"full_name":"Hochhaus, Thorben","last_name":"Hochhaus","first_name":"Thorben"},{"last_name":"Grünewald","first_name":"Marcus","full_name":"Grünewald, Marcus"},{"id":"101499","first_name":"Julia","last_name":"Riese","orcid":"0000-0002-3053-0534","full_name":"Riese, Julia"}],"publication_identifier":{"issn":["2818-4734"]},"doi":"10.69997/sct.152209","language":[{"iso":"eng"}],"quality_controlled":"1","citation":{"bibtex":"@inproceedings{Hochhaus_Grünewald_Riese_2026, title={Optimization of Site-wide Heat-Integrated Utility Systems with Heat Pumps using MILP}, volume={6}, DOI={10.69997/sct.152209}, booktitle={Systems and Control Transactions}, publisher={PSE Press}, author={Hochhaus, Thorben and Grünewald, Marcus and Riese, Julia}, year={2026} }","ama":"Hochhaus T, Grünewald M, Riese J. Optimization of Site-wide Heat-Integrated Utility Systems with Heat Pumps using MILP. In: Systems and Control Transactions. Vol 6. PSE Press; 2026. doi:10.69997/sct.152209","mla":"Hochhaus, Thorben, et al. “Optimization of Site-Wide Heat-Integrated Utility Systems with Heat Pumps Using MILP.” Systems and Control Transactions, vol. 6, PSE Press, 2026, doi:10.69997/sct.152209.","chicago":"Hochhaus, Thorben, Marcus Grünewald, and Julia Riese. “Optimization of Site-Wide Heat-Integrated Utility Systems with Heat Pumps Using MILP.” In Systems and Control Transactions, Vol. 6. PSE Press, 2026. https://doi.org/10.69997/sct.152209.","short":"T. Hochhaus, M. Grünewald, J. Riese, in: Systems and Control Transactions, PSE Press, 2026.","ieee":"T. Hochhaus, M. Grünewald, and J. Riese, “Optimization of Site-wide Heat-Integrated Utility Systems with Heat Pumps using MILP,” in Systems and Control Transactions, 2026, vol. 6, doi: 10.69997/sct.152209.","apa":"Hochhaus, T., Grünewald, M., & Riese, J. (2026). Optimization of Site-wide Heat-Integrated Utility Systems with Heat Pumps using MILP. Systems and Control Transactions, 6. https://doi.org/10.69997/sct.152209"},"status":"public","user_id":"101499","volume":6,"_id":"66007","publisher":"PSE Press"},{"oa":"1","citation":{"ieee":"R. Pollmann, F. Roeder, C. Silberhorn, and B. Brecht, “Limitations of entangled two-photon absorption detection,” Physical Review A, vol. 114, no. 1, Art. no. 013718, 2026, doi: 10.1103/qpb1-hk5l.","apa":"Pollmann, R., Roeder, F., Silberhorn, C., & Brecht, B. (2026). Limitations of entangled two-photon absorption detection. Physical Review A, 114(1), Article 013718. https://doi.org/10.1103/qpb1-hk5l","short":"R. Pollmann, F. Roeder, C. Silberhorn, B. Brecht, Physical Review A 114 (2026).","chicago":"Pollmann, René, Franz Roeder, Christine Silberhorn, and Benjamin Brecht. “Limitations of Entangled Two-Photon Absorption Detection.” Physical Review A 114, no. 1 (2026). https://doi.org/10.1103/qpb1-hk5l.","mla":"Pollmann, René, et al. “Limitations of Entangled Two-Photon Absorption Detection.” Physical Review A, vol. 114, no. 1, 013718, American Physical Society (APS), 2026, doi:10.1103/qpb1-hk5l.","bibtex":"@article{Pollmann_Roeder_Silberhorn_Brecht_2026, title={Limitations of entangled two-photon absorption detection}, volume={114}, DOI={10.1103/qpb1-hk5l}, number={1013718}, journal={Physical Review A}, publisher={American Physical Society (APS)}, author={Pollmann, René and Roeder, Franz and Silberhorn, Christine and Brecht, Benjamin}, year={2026} }","ama":"Pollmann R, Roeder F, Silberhorn C, Brecht B. Limitations of entangled two-photon absorption detection. Physical Review A. 2026;114(1). doi:10.1103/qpb1-hk5l"},"user_id":"78890","volume":114,"_id":"66583","publisher":"American Physical Society (APS)","status":"public","type":"journal_article","department":[{"_id":"623"},{"_id":"15"}],"date_created":"2026-07-24T10:53:18Z","abstract":[{"lang":"eng","text":"We introduce a method for determining the sensitivity of any given entangled two-photon absorption (ETPA) measurement. By modeling all signal and noise contributions to the measurement, we derive a single numerical value that describes the sensitivity of the ETPA measurement in Göppert-Mayer units. This allows us to directly compare vastly different experimental approaches and determine whether ETPA will be detectable under the given conditions. Therefore we can quantify the effect of any change to a given experimental apparatus and identify the ideal optimization pathway."}],"issue":"1","publication":"Physical Review A","doi":"10.1103/qpb1-hk5l","main_file_link":[{"url":"https://journals.aps.org/pra/abstract/10.1103/qpb1-hk5l","open_access":"1"}],"article_number":"013718","language":[{"iso":"eng"}],"date_updated":"2026-07-24T11:00:08Z","publication_status":"published","intvolume":" 114","article_type":"original","title":"Limitations of entangled two-photon absorption detection","year":"2026","publication_identifier":{"issn":["2469-9926","2469-9934"]},"author":[{"id":"78890","first_name":"René","last_name":"Pollmann","full_name":"Pollmann, René"},{"last_name":"Roeder","first_name":"Franz","full_name":"Roeder, Franz","id":"88149"},{"id":"26263","full_name":"Silberhorn, Christine","first_name":"Christine","last_name":"Silberhorn"},{"first_name":"Benjamin","last_name":"Brecht","orcid":"0000-0003-4140-0556 ","full_name":"Brecht, Benjamin","id":"27150"}]},{"publication":"Discover Mechanical Engineering","issue":"1","abstract":[{"text":"Abstract\r\n The increasing use of thin-walled profiles in automotive battery housing construction is leading to a growing demand for one-sided access mechanical fasteners. Currently, the installation of blind rivet nuts still requires pre-drilling using chip-forming operations. In Meschut and Meyer (Vorlochfreies Setzen von Funktionselementen mittels Fließformen, Europäische Forschungsgesellschaft für Blechverarbeitung e.V. (EFB), Hannover, 2021), a chipless, two-step method for installing blind rivet nuts was developed, in which flow-drilling is the initial step. To eliminate the pre-drilling operation and optimise the joining process of blind rivet nuts, a pilot-hole-free joining method using a flow-drilling process is being pursued. The use of these blind rivet nuts can significantly simplify the joining process by eliminating chip-forming pre-drilling operations. Additionally, the screw-through capability reduces screw variance in automated fastening, optimising the feeding process by minimising the risk of incorrect screw selection. This work aims to develop a single-step process for the installation of a blind rivet nut. To achieve this, it is necessary to design the geometries of both the blind rivet nut and the flow-drill former, which also serves as the mandrel for the blind rivet nut. In addition to the geometries of the tools and functional elements, the flow-drilling process itself has been developed. Special attention is given to the pull-through and the formation of the closing head. To optimise the closing head formation, an iterative optimization process was used. The quality of the pull-through is improved by varying the tip geometries and adjusting the process parameters during flow-drilling.","lang":"eng"}],"date_created":"2026-07-31T07:00:58Z","type":"journal_article","title":"Single-stage setting of blind rivet nuts without pre-drilling","year":"2026","author":[{"id":"84119","first_name":"Yannic","last_name":"Böhm","full_name":"Böhm, Yannic"},{"id":"32056","full_name":"Meschut, Gerson","last_name":"Meschut","orcid":"0000-0002-2763-1246","first_name":"Gerson"}],"publication_identifier":{"issn":["2731-6564"]},"publication_status":"published","date_updated":"2026-07-31T07:04:13Z","intvolume":" 5","article_number":"121","language":[{"iso":"eng"}],"doi":"10.1007/s44245-026-00222-x","citation":{"short":"Y. Böhm, G. Meschut, Discover Mechanical Engineering 5 (2026).","chicago":"Böhm, Yannic, and Gerson Meschut. “Single-Stage Setting of Blind Rivet Nuts without Pre-Drilling.” Discover Mechanical Engineering 5, no. 1 (2026). https://doi.org/10.1007/s44245-026-00222-x.","ieee":"Y. Böhm and G. Meschut, “Single-stage setting of blind rivet nuts without pre-drilling,” Discover Mechanical Engineering, vol. 5, no. 1, Art. no. 121, 2026, doi: 10.1007/s44245-026-00222-x.","apa":"Böhm, Y., & Meschut, G. (2026). Single-stage setting of blind rivet nuts without pre-drilling. Discover Mechanical Engineering, 5(1), Article 121. https://doi.org/10.1007/s44245-026-00222-x","bibtex":"@article{Böhm_Meschut_2026, title={Single-stage setting of blind rivet nuts without pre-drilling}, volume={5}, DOI={10.1007/s44245-026-00222-x}, number={1121}, journal={Discover Mechanical Engineering}, publisher={Springer Science and Business Media LLC}, author={Böhm, Yannic and Meschut, Gerson}, year={2026} }","ama":"Böhm Y, Meschut G. Single-stage setting of blind rivet nuts without pre-drilling. Discover Mechanical Engineering. 2026;5(1). doi:10.1007/s44245-026-00222-x","mla":"Böhm, Yannic, and Gerson Meschut. “Single-Stage Setting of Blind Rivet Nuts without Pre-Drilling.” Discover Mechanical Engineering, vol. 5, no. 1, 121, Springer Science and Business Media LLC, 2026, doi:10.1007/s44245-026-00222-x."},"status":"public","publisher":"Springer Science and Business Media LLC","_id":"66622","user_id":"84119","volume":5},{"status":"public","_id":"66764","publisher":"Wiley","user_id":"111274","citation":{"short":"T. Schmücker, J. Riese, Chemie Ingenieur Technik (2026).","chicago":"Schmücker, Torben, and Julia Riese. “Model‐Based Optimization Framework for Catalyst Dilution Applications in CO2‐Methanation Reactors.” Chemie Ingenieur Technik, 2026. https://doi.org/10.1002/cite.70162.","ieee":"T. Schmücker and J. Riese, “Model‐Based Optimization Framework for Catalyst Dilution Applications in CO2‐Methanation Reactors,” Chemie Ingenieur Technik, Art. no. e70162, 2026, doi: 10.1002/cite.70162.","apa":"Schmücker, T., & Riese, J. (2026). Model‐Based Optimization Framework for Catalyst Dilution Applications in CO2‐Methanation Reactors. Chemie Ingenieur Technik, Article e70162. https://doi.org/10.1002/cite.70162","bibtex":"@article{Schmücker_Riese_2026, title={Model‐Based Optimization Framework for Catalyst Dilution Applications in CO2‐Methanation Reactors}, DOI={10.1002/cite.70162}, number={e70162}, journal={Chemie Ingenieur Technik}, publisher={Wiley}, author={Schmücker, Torben and Riese, Julia}, year={2026} }","ama":"Schmücker T, Riese J. Model‐Based Optimization Framework for Catalyst Dilution Applications in CO2‐Methanation Reactors. Chemie Ingenieur Technik. Published online 2026. doi:10.1002/cite.70162","mla":"Schmücker, Torben, and Julia Riese. “Model‐Based Optimization Framework for Catalyst Dilution Applications in CO2‐Methanation Reactors.” Chemie Ingenieur Technik, e70162, Wiley, 2026, doi:10.1002/cite.70162."},"quality_controlled":"1","year":"2026","title":"Model‐Based Optimization Framework for Catalyst Dilution Applications in CO2‐Methanation Reactors","publication_identifier":{"issn":["0009-286X","1522-2640"]},"author":[{"full_name":"Schmücker, Torben","last_name":"Schmücker","first_name":"Torben","id":"111274"},{"full_name":"Riese, Julia","orcid":"0000-0002-3053-0534","first_name":"Julia","last_name":"Riese","id":"101499"}],"publication_status":"published","date_updated":"2026-08-21T06:09:31Z","article_type":"original","article_number":"e70162","language":[{"iso":"eng"}],"doi":"10.1002/cite.70162","publication":"Chemie Ingenieur Technik","abstract":[{"text":"ABSTRACT\r\n \r\n Methane, synthesized from renewable hydrogen and biogenic CO\r\n 2\r\n , can be a part of the transformation towards renewable energy carriers. A major engineering challenge is the optimization of the fixed‐bed reactor design, specifically the heat dissipation in regions of high reaction heat release. A mitigation concept is the introduction of inert material into the fixed bed, called catalyst dilution. In this study, a 1D continuity model is presented, which aims to predict catalyst superheating. This model is used in an exploratory study to identify system sensitivity and optimization parameters. Subsequently, an optimization framework for improving the reactor design is tested, resulting in a 148‐K reduction in peak catalyst temperature when using a 33.3 vol% catalyst dilution.\r\n ","lang":"eng"}],"date_created":"2026-08-20T15:44:11Z","type":"journal_article","department":[{"_id":"831"}]},{"department":[{"_id":"819"}],"type":"conference","date_created":"2026-07-01T12:13:34Z","citation":{"ieee":"U. Skvorc, N. van Stein, M. Seiler, B. Grimme, T. Bäck, and H. Trautmann, “LLM Driven Design of Continuous Optimization Problems with Controllable High-Level Properties,” in Applications of Evolutionary Computation - 29th European Conference, EvoApplications 2026, Held as Part of EvoStar 2026, Toulouse, France, April 8-10, 2026, Proceedings, Part II, 2026, vol. 16525, pp. 183–199, doi: 10.1007/978-3-032-23607-4_12.","apa":"Skvorc, U., van Stein, N., Seiler, M., Grimme, B., Bäck, T., & Trautmann, H. (2026). LLM Driven Design of Continuous Optimization Problems with Controllable High-Level Properties. In P. García-Sánchez, J. D. lvarez, & A. Murphy (Eds.), Applications of Evolutionary Computation - 29th European Conference, EvoApplications 2026, Held as Part of EvoStar 2026, Toulouse, France, April 8-10, 2026, Proceedings, Part II (Vol. 16525, pp. 183–199). Springer. https://doi.org/10.1007/978-3-032-23607-4_12","short":"U. Skvorc, N. van Stein, M. Seiler, B. Grimme, T. Bäck, H. Trautmann, in: P. García-Sánchez, J.D. lvarez, A. Murphy (Eds.), Applications of Evolutionary Computation - 29th European Conference, EvoApplications 2026, Held as Part of EvoStar 2026, Toulouse, France, April 8-10, 2026, Proceedings, Part II, Springer, 2026, pp. 183–199.","chicago":"Skvorc, Urban, Niki van Stein, Moritz Seiler, Britta Grimme, Thomas Bäck, and Heike Trautmann. “LLM Driven Design of Continuous Optimization Problems with Controllable High-Level Properties.” In Applications of Evolutionary Computation - 29th European Conference, EvoApplications 2026, Held as Part of EvoStar 2026, Toulouse, France, April 8-10, 2026, Proceedings, Part II, edited by Pablo García-Sánchez, Josefa Díaz lvarez, and Aidan Murphy, 16525:183–199. Lecture Notes in Computer Science. Springer, 2026. https://doi.org/10.1007/978-3-032-23607-4_12.","mla":"Skvorc, Urban, et al. “LLM Driven Design of Continuous Optimization Problems with Controllable High-Level Properties.” Applications of Evolutionary Computation - 29th European Conference, EvoApplications 2026, Held as Part of EvoStar 2026, Toulouse, France, April 8-10, 2026, Proceedings, Part II, edited by Pablo García-Sánchez et al., vol. 16525, Springer, 2026, pp. 183–199, doi:10.1007/978-3-032-23607-4_12.","bibtex":"@inproceedings{Skvorc_van Stein_Seiler_Grimme_Bäck_Trautmann_2026, series={Lecture Notes in Computer Science}, title={LLM Driven Design of Continuous Optimization Problems with Controllable High-Level Properties}, volume={16525}, DOI={10.1007/978-3-032-23607-4_12}, booktitle={Applications of Evolutionary Computation - 29th European Conference, EvoApplications 2026, Held as Part of EvoStar 2026, Toulouse, France, April 8-10, 2026, Proceedings, Part II}, publisher={Springer}, author={Skvorc, Urban and van Stein, Niki and Seiler, Moritz and Grimme, Britta and Bäck, Thomas and Trautmann, Heike}, editor={García-Sánchez, Pablo and lvarez, Josefa Díaz and Murphy, Aidan}, year={2026}, pages={183–199}, collection={Lecture Notes in Computer Science} }","ama":"Skvorc U, van Stein N, Seiler M, Grimme B, Bäck T, Trautmann H. LLM Driven Design of Continuous Optimization Problems with Controllable High-Level Properties. In: García-Sánchez P, lvarez JD, Murphy A, eds. Applications of Evolutionary Computation - 29th European Conference, EvoApplications 2026, Held as Part of EvoStar 2026, Toulouse, France, April 8-10, 2026, Proceedings, Part II. Vol 16525. Lecture Notes in Computer Science. Springer; 2026:183–199. doi:10.1007/978-3-032-23607-4_12"},"publication":"Applications of Evolutionary Computation - 29th European Conference, EvoApplications 2026, Held as Part of EvoStar 2026, Toulouse, France, April 8-10, 2026, Proceedings, Part II","editor":[{"last_name":"García-Sánchez","first_name":"Pablo","full_name":"García-Sánchez, Pablo"},{"full_name":"lvarez, Josefa Díaz","last_name":"lvarez","first_name":"Josefa Díaz"},{"full_name":"Murphy, Aidan","first_name":"Aidan","last_name":"Murphy"}],"volume":16525,"doi":"10.1007/978-3-032-23607-4_12","user_id":"15504","_id":"66095","publisher":"Springer","series_title":"Lecture Notes in Computer Science","language":[{"iso":"eng"}],"page":"183–199","intvolume":" 16525","date_updated":"2026-07-01T12:14:04Z","author":[{"id":"103764","full_name":"Skvorc, Urban","first_name":"Urban","last_name":"Skvorc"},{"first_name":"Niki","last_name":"van Stein","full_name":"van Stein, Niki"},{"first_name":"Moritz","last_name":"Seiler","full_name":"Seiler, Moritz","id":"105520"},{"id":"103682","last_name":"Grimme","first_name":"Britta","full_name":"Grimme, Britta"},{"last_name":"Bäck","first_name":"Thomas","full_name":"Bäck, Thomas"},{"orcid":"0000-0002-9788-8282","last_name":"Trautmann","first_name":"Heike","full_name":"Trautmann, Heike","id":"100740"}],"year":"2026","status":"public","title":"LLM Driven Design of Continuous Optimization Problems with Controllable High-Level Properties"},{"date_created":"2026-07-13T12:54:11Z","keyword":["vocational teacher education","teacher shortage","career-changing teachers","teacher reflections"],"type":"conference","department":[{"_id":"300"}],"citation":{"mla":"Vernholz, Mats, et al. Different Pathways, Shared Challenges: Reflections on Entering Vocational Teaching in  Germany  . 2026.","bibtex":"@inproceedings{Vernholz_Jonas-Ahrend_Temmen_2026, title={Different Pathways, Shared Challenges: Reflections on Entering Vocational Teaching in  Germany  }, author={Vernholz, Mats and Jonas-Ahrend, Gabriela and Temmen, Katrin}, year={2026} }","ama":"Vernholz M, Jonas-Ahrend G, Temmen K. Different Pathways, Shared Challenges: Reflections on Entering Vocational Teaching in  Germany  . In: ; 2026.","ieee":"M. Vernholz, G. Jonas-Ahrend, and K. Temmen, “Different Pathways, Shared Challenges: Reflections on Entering Vocational Teaching in  Germany  ,” presented at the 19th Stockholm International Conference of Research on Vocational Education and Training, Boat Viking Glory, 2026.","apa":"Vernholz, M., Jonas-Ahrend, G., & Temmen, K. (2026). Different Pathways, Shared Challenges: Reflections on Entering Vocational Teaching in  Germany  . 19th Stockholm International Conference of Research on Vocational Education and Training, Boat Viking Glory.","short":"M. Vernholz, G. Jonas-Ahrend, K. Temmen, in: 2026.","chicago":"Vernholz, Mats, Gabriela Jonas-Ahrend, and Katrin Temmen. “Different Pathways, Shared Challenges: Reflections on Entering Vocational Teaching in  Germany  ,” 2026."},"abstract":[{"text":"Germany is experiencing a shortage of teachers, a situation that is particularly evident in the \r\ndomain of technical vocational education. In response to this, various pathways into vocational \r\nteacher education have been established. These pathways are diverse in their nature but all lead to \r\nthe same teacher degree as traditional teacher education. In two interview studies (n=22 (pre\r\nservice) vocational teachers), initial motives of entering teacher education (based on FIT-Choice) \r\nas well as retrospective views on the career choice after entering the profession (based on PLP\r\nmodel) are analyzed. The present study compares the reflective views of pre-service teachers and \r\ncareer-changing in-service teachers (CCIT). Although both groups generally perceive their career \r\nchoice positively, the results raise questions about why CCITs did not enter the field of teacher \r\neducation in the first place. Additionally, the analysis allows for further discussion about existing \r\nteacher education programs in times of teacher shortage.","lang":"eng"}],"_id":"66462","language":[{"iso":"eng"}],"user_id":"77633","title":"Different Pathways, Shared Challenges: Reflections on Entering Vocational Teaching in Germany ","year":"2026","status":"public","author":[{"full_name":"Vernholz, Mats","first_name":"Mats","last_name":"Vernholz","orcid":"0000-0001-5175-357X","id":"76955"},{"id":"77633","full_name":"Jonas-Ahrend, Gabriela","orcid":"0000-0003-3898-954X","first_name":"Gabriela","last_name":"Jonas-Ahrend"},{"full_name":"Temmen, Katrin","first_name":"Katrin","last_name":"Temmen"}],"conference":{"name":"19th Stockholm International Conference of Research on Vocational Education and Training","start_date":"2026-05-17","location":"Boat Viking Glory","end_date":"2026-05-19"},"date_updated":"2026-07-13T12:56:46Z"},{"status":"public","user_id":"30525","_id":"66632","publisher":"Wiley","quality_controlled":"1","citation":{"ieee":"V. Devaraj et al., “Spatially Uniform and Defect‐Tolerant Plasmonic Responses in 3D Printed Gold Nanoparticle Assemblies,” Laser &amp; Photonics Reviews, Art. no. e71686, 2026, doi: 10.1002/lpor.71686.","apa":"Devaraj, V., Kwak, S., Kim, H., Sung, S., Lee, J., Zentgraf, T., & Kim, W. (2026). Spatially Uniform and Defect‐Tolerant Plasmonic Responses in 3D Printed Gold Nanoparticle Assemblies. Laser &amp; Photonics Reviews, Article e71686. https://doi.org/10.1002/lpor.71686","short":"V. Devaraj, S. Kwak, H. Kim, S. Sung, J. Lee, T. Zentgraf, W. Kim, Laser &amp; Photonics Reviews (2026).","chicago":"Devaraj, Vasanthan, Sunghyun Kwak, Hyeongjip Kim, Sang‐Keun Sung, Jong‐Min Lee, Thomas Zentgraf, and Won‐Geun Kim. “Spatially Uniform and Defect‐Tolerant Plasmonic Responses in 3D Printed Gold Nanoparticle Assemblies.” Laser &amp; Photonics Reviews, 2026. https://doi.org/10.1002/lpor.71686.","mla":"Devaraj, Vasanthan, et al. “Spatially Uniform and Defect‐Tolerant Plasmonic Responses in 3D Printed Gold Nanoparticle Assemblies.” Laser &amp; Photonics Reviews, e71686, Wiley, 2026, doi:10.1002/lpor.71686.","bibtex":"@article{Devaraj_Kwak_Kim_Sung_Lee_Zentgraf_Kim_2026, title={Spatially Uniform and Defect‐Tolerant Plasmonic Responses in 3D Printed Gold Nanoparticle Assemblies}, DOI={10.1002/lpor.71686}, number={e71686}, journal={Laser &amp; Photonics Reviews}, publisher={Wiley}, author={Devaraj, Vasanthan and Kwak, Sunghyun and Kim, Hyeongjip and Sung, Sang‐Keun and Lee, Jong‐Min and Zentgraf, Thomas and Kim, Won‐Geun}, year={2026} }","ama":"Devaraj V, Kwak S, Kim H, et al. Spatially Uniform and Defect‐Tolerant Plasmonic Responses in 3D Printed Gold Nanoparticle Assemblies. Laser &amp; Photonics Reviews. Published online 2026. doi:10.1002/lpor.71686"},"oa":"1","date_updated":"2026-08-03T06:45:01Z","publication_status":"published","article_type":"original","year":"2026","title":"Spatially Uniform and Defect‐Tolerant Plasmonic Responses in 3D Printed Gold Nanoparticle Assemblies","publication_identifier":{"issn":["1863-8880","1863-8899"]},"author":[{"id":"103814","full_name":"Devaraj, Vasanthan","last_name":"Devaraj","first_name":"Vasanthan"},{"full_name":"Kwak, Sunghyun","first_name":"Sunghyun","last_name":"Kwak"},{"last_name":"Kim","first_name":"Hyeongjip","full_name":"Kim, Hyeongjip"},{"full_name":"Sung, Sang‐Keun","last_name":"Sung","first_name":"Sang‐Keun"},{"last_name":"Lee","first_name":"Jong‐Min","full_name":"Lee, Jong‐Min"},{"full_name":"Zentgraf, Thomas","last_name":"Zentgraf","first_name":"Thomas","orcid":"0000-0002-8662-1101","id":"30525"},{"first_name":"Won‐Geun","last_name":"Kim","full_name":"Kim, Won‐Geun"}],"doi":"10.1002/lpor.71686","main_file_link":[{"open_access":"1","url":"https://onlinelibrary.wiley.com/doi/10.1002/lpor.71686"}],"article_number":"e71686","language":[{"iso":"eng"}],"abstract":[{"lang":"eng","text":"Three‐dimensional (3D) assemblies of gold nanoparticles (AuNPs) offer a rich platform for plasmonic coupling and near‐field engineering, yet their optical behavior is often complex due to structural disorder and fabrication‐induced variability. Here, we present a systematic optical investigation of large‐scale 3D AuNP assemblies fabricated via meniscus‐guided assembly, focusing on the reproducibility, spatial uniformity, and mode evolution of their plasmonic responses. Spatially‐resolved dark‐field scattering measurements reveal that high‐aspect‐ratio AuNP pillars exhibit uniform scattering spectra along their height and across different pillars, despite variations in geometry and structure. Electromagnetic simulations suggest that this robustness arises from a collective many‐particle plasmonic response that remains optically active despite structural perturbations. The corresponding near‐field and surface‐charge distributions remain spatially distributed under representative structural perturbations, consistent with volumetric averaging across the three‐dimensional assembly. Building on this robust platform, we introduce compositional modulation through a core–satellite architecture by incorporating smaller AuNPs. This yields a composition‐dependent spectral redistribution, including the emergence of an additional long‐wavelength spectral feature in the core–satellite assemblies. Wavelength‐dependent surface‐enhanced Raman scattering measurements reveal contrasting responses under 633 and 785 nm excitation, reflecting redistribution of local plasmonic coupling pathways. These results provide process‐enabled guidelines for using meniscus‐guided 3D‐nanoprinting to realize robust nanoparticle assemblies."}],"publication":"Laser & Photonics Reviews","type":"journal_article","department":[{"_id":"15"},{"_id":"230"},{"_id":"289"},{"_id":"623"}],"date_created":"2026-08-03T06:43:03Z"},{"editor":[{"full_name":"Trujillo, Leonardo","first_name":"Leonardo","last_name":"Trujillo"},{"last_name":"Hu","first_name":"Ting","full_name":"Hu, Ting"}],"doi":"10.1145/3795095.3805136","user_id":"15504","publisher":"ACM","_id":"66670","language":[{"iso":"eng"}],"page":"134–142","date_updated":"2026-08-06T07:00:02Z","author":[{"full_name":"Mensendiek, Carolin","last_name":"Mensendiek","first_name":"Carolin","id":"75006"},{"last_name":"Preuß","orcid":"0009-0008-9308-2418","first_name":"Oliver Ludger","full_name":"Preuß, Oliver Ludger","id":"102978"},{"id":"102977","full_name":"Rook, Jeroen","last_name":"Rook","first_name":"Jeroen"},{"last_name":"Chicano","first_name":"Francisco","full_name":"Chicano, Francisco"},{"last_name":"Whitley","first_name":"Darrell","full_name":"Whitley, Darrell"},{"id":"100740","first_name":"Heike","orcid":"0000-0002-9788-8282","last_name":"Trautmann","full_name":"Trautmann, Heike"}],"status":"public","year":"2026","title":"Digging to the Ground Truth: Solving Multi-objective Gray-Box Optimization Problems through Hyperplane Elimination","department":[{"_id":"819"}],"type":"conference","date_created":"2026-08-06T06:59:20Z","citation":{"ieee":"C. Mensendiek, O. L. Preuß, J. Rook, F. Chicano, D. Whitley, and H. Trautmann, “Digging to the Ground Truth: Solving Multi-objective Gray-Box Optimization Problems through Hyperplane Elimination,” in Proceedings of the Genetic and Evolutionary Computation Conference, GECCO 2026, Centro Internacional de Convenciones CIC-ANDE, San Jose, Costa Rica, July 13-17, 2026, 2026, pp. 134–142, doi: 10.1145/3795095.3805136.","apa":"Mensendiek, C., Preuß, O. L., Rook, J., Chicano, F., Whitley, D., & Trautmann, H. (2026). Digging to the Ground Truth: Solving Multi-objective Gray-Box Optimization Problems through Hyperplane Elimination. In L. Trujillo & T. Hu (Eds.), Proceedings of the Genetic and Evolutionary Computation Conference, GECCO 2026, Centro Internacional de Convenciones CIC-ANDE, San Jose, Costa Rica, July 13-17, 2026 (pp. 134–142). ACM. https://doi.org/10.1145/3795095.3805136","chicago":"Mensendiek, Carolin, Oliver Ludger Preuß, Jeroen Rook, Francisco Chicano, Darrell Whitley, and Heike Trautmann. “Digging to the Ground Truth: Solving Multi-Objective Gray-Box Optimization Problems through Hyperplane Elimination.” In Proceedings of the Genetic and Evolutionary Computation Conference, GECCO 2026, Centro Internacional de Convenciones CIC-ANDE, San Jose, Costa Rica, July 13-17, 2026, edited by Leonardo Trujillo and Ting Hu, 134–142. ACM, 2026. https://doi.org/10.1145/3795095.3805136.","short":"C. Mensendiek, O.L. Preuß, J. Rook, F. Chicano, D. Whitley, H. Trautmann, in: L. Trujillo, T. Hu (Eds.), Proceedings of the Genetic and Evolutionary Computation Conference, GECCO 2026, Centro Internacional de Convenciones CIC-ANDE, San Jose, Costa Rica, July 13-17, 2026, ACM, 2026, pp. 134–142.","mla":"Mensendiek, Carolin, et al. “Digging to the Ground Truth: Solving Multi-Objective Gray-Box Optimization Problems through Hyperplane Elimination.” Proceedings of the Genetic and Evolutionary Computation Conference, GECCO 2026, Centro Internacional de Convenciones CIC-ANDE, San Jose, Costa Rica, July 13-17, 2026, edited by Leonardo Trujillo and Ting Hu, ACM, 2026, pp. 134–142, doi:10.1145/3795095.3805136.","bibtex":"@inproceedings{Mensendiek_Preuß_Rook_Chicano_Whitley_Trautmann_2026, title={Digging to the Ground Truth: Solving Multi-objective Gray-Box Optimization Problems through Hyperplane Elimination}, DOI={10.1145/3795095.3805136}, booktitle={Proceedings of the Genetic and Evolutionary Computation Conference, GECCO 2026, Centro Internacional de Convenciones CIC-ANDE, San Jose, Costa Rica, July 13-17, 2026}, publisher={ACM}, author={Mensendiek, Carolin and Preuß, Oliver Ludger and Rook, Jeroen and Chicano, Francisco and Whitley, Darrell and Trautmann, Heike}, editor={Trujillo, Leonardo and Hu, Ting}, year={2026}, pages={134–142} }","ama":"Mensendiek C, Preuß OL, Rook J, Chicano F, Whitley D, Trautmann H. Digging to the Ground Truth: Solving Multi-objective Gray-Box Optimization Problems through Hyperplane Elimination. In: Trujillo L, Hu T, eds. Proceedings of the Genetic and Evolutionary Computation Conference, GECCO 2026, Centro Internacional de Convenciones CIC-ANDE, San Jose, Costa Rica, July 13-17, 2026. ACM; 2026:134–142. doi:10.1145/3795095.3805136"},"publication":"Proceedings of the Genetic and Evolutionary Computation Conference, GECCO 2026, Centro Internacional de Convenciones CIC-ANDE, San Jose, Costa Rica, July 13-17, 2026"},{"publication":"Literatur in Westfalen. Beiträge zur Forschung 22","date_created":"2026-08-20T11:48:37Z","type":"book_chapter","corporate_editor":["Literaturkommission Westfalen des Landschaftsverbandes Westfalen-Lippe"],"publication_identifier":{"isbn":["978-3-8498-2149-4"]},"author":[{"id":"363","first_name":"Rita","last_name":"Morrien","full_name":"Morrien, Rita"}],"title":"\"Future Fresko\" - Charlotte Kraffts Münsterland-Blog MOMUMENT als dystopische Heimatliteratur","year":"2026","intvolume":" 22","date_updated":"2026-08-20T11:48:47Z","publication_status":"published","language":[{"iso":"ger"}],"series_title":"Literatur in Westfalen","citation":{"ieee":"R. Morrien, “‘Future Fresko’ - Charlotte Kraffts Münsterland-Blog MOMUMENT als dystopische Heimatliteratur,” in Literatur in Westfalen. Beiträge zur Forschung 22, vol. 22, S. Höppner, A. Maxwill, and Literaturkommission Westfalen des Landschaftsverbandes Westfalen-Lippe, Eds. Bielefeld: Aisthesis Verlag, 2026, pp. 429–438.","apa":"Morrien, R. (2026). “Future Fresko” - Charlotte Kraffts Münsterland-Blog MOMUMENT als dystopische Heimatliteratur. In S. Höppner, A. Maxwill, & Literaturkommission Westfalen des Landschaftsverbandes Westfalen-Lippe (Eds.), Literatur in Westfalen. Beiträge zur Forschung 22 (Vol. 22, pp. 429–438). Aisthesis Verlag.","short":"R. Morrien, in: S. Höppner, A. Maxwill, Literaturkommission Westfalen des Landschaftsverbandes Westfalen-Lippe (Eds.), Literatur in Westfalen. Beiträge zur Forschung 22, Aisthesis Verlag, Bielefeld, 2026, pp. 429–438.","chicago":"Morrien, Rita. “‘Future Fresko’ - Charlotte Kraffts Münsterland-Blog MOMUMENT als dystopische Heimatliteratur.” In Literatur in Westfalen. Beiträge zur Forschung 22, edited by Stefan Höppner, Arnold Maxwill, and Literaturkommission Westfalen des Landschaftsverbandes Westfalen-Lippe, 22:429–38. Literatur in Westfalen. Bielefeld: Aisthesis Verlag, 2026.","mla":"Morrien, Rita. “‘Future Fresko’ - Charlotte Kraffts Münsterland-Blog MOMUMENT als dystopische Heimatliteratur.” Literatur in Westfalen. Beiträge zur Forschung 22, edited by Stefan Höppner et al., vol. 22, Aisthesis Verlag, 2026, pp. 429–38.","bibtex":"@inbook{Morrien_2026, place={Bielefeld}, series={Literatur in Westfalen}, title={“Future Fresko” - Charlotte Kraffts Münsterland-Blog MOMUMENT als dystopische Heimatliteratur}, volume={22}, booktitle={Literatur in Westfalen. Beiträge zur Forschung 22}, publisher={Aisthesis Verlag}, author={Morrien, Rita}, editor={Höppner, Stefan and Maxwill, Arnold and Literaturkommission Westfalen des Landschaftsverbandes Westfalen-Lippe}, year={2026}, pages={429–438}, collection={Literatur in Westfalen} }","ama":"Morrien R. “Future Fresko” - Charlotte Kraffts Münsterland-Blog MOMUMENT als dystopische Heimatliteratur. In: Höppner S, Maxwill A, Literaturkommission Westfalen des Landschaftsverbandes Westfalen-Lippe, eds. Literatur in Westfalen. Beiträge zur Forschung 22. Vol 22. Literatur in Westfalen. Aisthesis Verlag; 2026:429-438."},"quality_controlled":"1","place":"Bielefeld","status":"public","publisher":"Aisthesis Verlag","_id":"66762","page":"429-438","editor":[{"first_name":"Stefan","last_name":"Höppner","full_name":"Höppner, Stefan"},{"full_name":"Maxwill, Arnold","last_name":"Maxwill","first_name":"Arnold"}],"volume":22,"user_id":"363"},{"type":"conference","department":[{"_id":"831"}],"date_created":"2026-09-04T07:36:15Z","quality_controlled":"1","publication":"Book of Full Paper 13th International Conference on Distillation & Absorption","citation":{"ieee":"N. Lutters, J. Riese, and Ö. A. Boz, “Electrification of Separation Column with 3D-Printed Ceramic Packings,” in Book of Full Paper 13th International Conference on Distillation & Absorption, 2026, pp. 709–714, doi: 10.83455/2026DISTILLATIONADSORPTION.","apa":"Lutters, N., Riese, J., & Boz, Ö. A. (2026). Electrification of Separation Column with 3D-Printed Ceramic Packings. Book of Full Paper 13th International Conference on Distillation & Absorption, 709–714. https://doi.org/10.83455/2026DISTILLATIONADSORPTION","short":"N. Lutters, J. Riese, Ö.A. Boz, in: Book of Full Paper 13th International Conference on Distillation & Absorption, 2026, pp. 709–714.","chicago":"Lutters, Nicole, Julia Riese, and Özgün Alkim Boz. “Electrification of Separation Column with 3D-Printed Ceramic Packings.” In Book of Full Paper 13th International Conference on Distillation & Absorption, 709–14, 2026. https://doi.org/10.83455/2026DISTILLATIONADSORPTION.","mla":"Lutters, Nicole, et al. “Electrification of Separation Column with 3D-Printed Ceramic Packings.” Book of Full Paper 13th International Conference on Distillation & Absorption, 2026, pp. 709–14, doi:10.83455/2026DISTILLATIONADSORPTION.","bibtex":"@inproceedings{Lutters_Riese_Boz_2026, title={Electrification of Separation Column with 3D-Printed Ceramic Packings}, DOI={10.83455/2026DISTILLATIONADSORPTION}, booktitle={Book of Full Paper 13th International Conference on Distillation & Absorption}, author={Lutters, Nicole and Riese, Julia and Boz, Özgün Alkim}, year={2026}, pages={709–714} }","ama":"Lutters N, Riese J, Boz ÖA. Electrification of Separation Column with 3D-Printed Ceramic Packings. In: Book of Full Paper 13th International Conference on Distillation & Absorption. ; 2026:709-714. doi:10.83455/2026DISTILLATIONADSORPTION"},"doi":"10.83455/2026DISTILLATIONADSORPTION","user_id":"101499","page":"709-714","_id":"66955","language":[{"iso":"eng"}],"date_updated":"2026-09-04T07:36:19Z","year":"2026","title":"Electrification of Separation Column with 3D-Printed Ceramic Packings","status":"public","author":[{"full_name":"Lutters, Nicole","last_name":"Lutters","orcid":"0009-0006-7828-8448","first_name":"Nicole","id":"22006"},{"first_name":"Julia","last_name":"Riese","orcid":"0000-0002-3053-0534","full_name":"Riese, Julia","id":"101499"},{"id":"116497","first_name":"Özgün Alkim","last_name":"Boz","full_name":"Boz, Özgün Alkim"}]},{"author":[{"id":"71541","full_name":"Gharibian, Sevag","orcid":"0000-0002-9992-3379","last_name":"Gharibian","first_name":"Sevag"},{"first_name":"Carsten","last_name":"Hecht","full_name":"Hecht, Carsten"},{"full_name":"Rudolph, Dorian","last_name":"Rudolph","first_name":"Dorian","id":"57863"}],"title":"Semidefinite extension complexity of the separable set, with applications to approximate disentanglers","status":"public","year":"2026","publication_status":"unpublished","date_updated":"2026-09-09T12:07:31Z","_id":"67088","language":[{"iso":"eng"}],"user_id":"71541","citation":{"mla":"Gharibian, Sevag, et al. “Semidefinite Extension Complexity of the Separable Set, with Applications to Approximate Disentanglers.” ArXiv:2609.09033.","bibtex":"@article{Gharibian_Hecht_Rudolph, title={Semidefinite extension complexity of the separable set, with applications to approximate disentanglers}, journal={arXiv:2609.09033}, author={Gharibian, Sevag and Hecht, Carsten and Rudolph, Dorian} }","ama":"Gharibian S, Hecht C, Rudolph D. Semidefinite extension complexity of the separable set, with applications to approximate disentanglers. arXiv:260909033.","ieee":"S. Gharibian, C. Hecht, and D. Rudolph, “Semidefinite extension complexity of the separable set, with applications to approximate disentanglers,” arXiv:2609.09033. .","apa":"Gharibian, S., Hecht, C., & Rudolph, D. (n.d.). Semidefinite extension complexity of the separable set, with applications to approximate disentanglers. In arXiv:2609.09033.","short":"S. Gharibian, C. Hecht, D. Rudolph, ArXiv:2609.09033 (n.d.).","chicago":"Gharibian, Sevag, Carsten Hecht, and Dorian Rudolph. “Semidefinite Extension Complexity of the Separable Set, with Applications to Approximate Disentanglers.” ArXiv:2609.09033, n.d."},"publication":"arXiv:2609.09033","abstract":[{"lang":"eng","text":"We prove quantitative lower bounds on the semidefinite extension complexity of the set of separable quantum states on $\\mathbb{C}^d\\otimes\\mathbb{C}^d$. We consider semidefinite programs (SDPs) that approximate the maximum acceptance probability of a measurement over separable states, the optimization problem underlying QMA(2). In the extended-formulation model of Harrow, Natarajan, and Wu (HNW), all measurements share a common feasible region and an objective-independent embedding of product states that exactly reproduces their acceptance probabilities. For every $0<θ<2/7$, there are constants $c_θ,a_θ>0$ such that, for sufficiently large $d$, any such SDP with uniform additive error $0