---
_id: '27524'
abstract:
- lang: eng
text: Because of widespread irregular lunch consumption by both children
and adults, information on the effects of lunch on short-term cognitive functioning
is relevant to public health. In September 2012, a MEDLINE search was conducted
for studies in which the effects of lunch on cognitive performance were examined.
Eleven experimental studies published from 1981 to 1996 were found and evaluated;
all involved adults. In three studies, the effects of lunch and lunch skipping
were compared; the remaining studies involved a determination of the effects of
lunch size and lunch composition. Results of studies in which lunch was compared
with no lunch indicate that lunch leads to potential impairment of some aspects
of cognitive functioning in the early afternoon. Lunch size may influence cognitive
functioning, with impairment more likely to occur after a large lunch than a small
lunch. Furthermore, in comparison with low-fat lunches, high-fat lunches seem
to result in slower but more accurate responses to some cognitive tasks. However,
these suggestions must be viewed with caution, as they are based on only a few
studies and are not thoroughly supported by high-quality evidence. In addition,
results obtained with adults are not applicable to children. Thus, the potential
effects of lunch need further examination in children and adults.
author:
- first_name: Katrin
full_name: Müller, Katrin
last_name: Müller
- first_name: Lars
full_name: Libuda, Lars
id: '88682'
last_name: Libuda
orcid: 0000-0003-1603-3133
- first_name: Anna Maria
full_name: Terschlüsen, Anna Maria
last_name: Terschlüsen
- first_name: Mathilde
full_name: Kersting, Mathilde
last_name: Kersting
citation:
ama: 'Müller K, Libuda L, Terschlüsen AM, Kersting M. A Review of the Effects of
Lunch: On Adults’ Short-term Cognitive Functioning. Canadian Journal of Dietetic
Practice and Research. Published online 2013:181-188. doi:10.3148/74.4.2013.181'
apa: 'Müller, K., Libuda, L., Terschlüsen, A. M., & Kersting, M. (2013). A Review
of the Effects of Lunch: On Adults’ Short-term Cognitive Functioning. Canadian
Journal of Dietetic Practice and Research, 181–188. https://doi.org/10.3148/74.4.2013.181'
bibtex: '@article{Müller_Libuda_Terschlüsen_Kersting_2013, title={A Review of the
Effects of Lunch: On Adults’ Short-term Cognitive Functioning}, DOI={10.3148/74.4.2013.181},
journal={Canadian Journal of Dietetic Practice and Research}, author={Müller,
Katrin and Libuda, Lars and Terschlüsen, Anna Maria and Kersting, Mathilde}, year={2013},
pages={181–188} }'
chicago: 'Müller, Katrin, Lars Libuda, Anna Maria Terschlüsen, and Mathilde Kersting.
“A Review of the Effects of Lunch: On Adults’ Short-Term Cognitive Functioning.”
Canadian Journal of Dietetic Practice and Research, 2013, 181–88. https://doi.org/10.3148/74.4.2013.181.'
ieee: 'K. Müller, L. Libuda, A. M. Terschlüsen, and M. Kersting, “A Review of the
Effects of Lunch: On Adults’ Short-term Cognitive Functioning,” Canadian Journal
of Dietetic Practice and Research, pp. 181–188, 2013, doi: 10.3148/74.4.2013.181.'
mla: 'Müller, Katrin, et al. “A Review of the Effects of Lunch: On Adults’ Short-Term
Cognitive Functioning.” Canadian Journal of Dietetic Practice and Research,
2013, pp. 181–88, doi:10.3148/74.4.2013.181.'
short: K. Müller, L. Libuda, A.M. Terschlüsen, M. Kersting, Canadian Journal of
Dietetic Practice and Research (2013) 181–188.
date_created: 2021-11-17T11:07:28Z
date_updated: 2022-01-06T06:57:40Z
department:
- _id: '35'
- _id: '22'
- _id: '395'
doi: 10.3148/74.4.2013.181
language:
- iso: eng
page: 181-188
publication: Canadian Journal of Dietetic Practice and Research
publication_identifier:
issn:
- 1486-3847
- 2292-9592
publication_status: published
status: public
title: 'A Review of the Effects of Lunch: On Adults’ Short-term Cognitive Functioning'
type: journal_article
user_id: '49428'
year: '2013'
...
---
_id: '27581'
author:
- first_name: C.
full_name: Mesch, C.
last_name: Mesch
- first_name: 'M. '
full_name: 'Stimming, M. '
last_name: Stimming
- first_name: A.
full_name: Wagner, A.
last_name: Wagner
- first_name: Lars
full_name: Libuda, Lars
id: '88682'
last_name: Libuda
orcid: 0000-0003-1603-3133
- first_name: M.
full_name: Kersting, M.
last_name: Kersting
citation:
ama: Mesch C, Stimming M, Wagner A, Libuda L, Kersting M. Rekrutierung von Müttern
mit Säuglingen in einer Interventionsstudie – erste Erkenntnisse aus der PINGU-Studie.
. Ernährungsumschau International. 2013;7:110-115.
apa: Mesch, C., Stimming, M., Wagner, A., Libuda, L., & Kersting, M. (2013).
Rekrutierung von Müttern mit Säuglingen in einer Interventionsstudie – erste Erkenntnisse
aus der PINGU-Studie. . Ernährungsumschau International, 7, 110–115.
bibtex: '@article{Mesch_Stimming_Wagner_Libuda_Kersting_2013, title={Rekrutierung
von Müttern mit Säuglingen in einer Interventionsstudie – erste Erkenntnisse aus
der PINGU-Studie. }, volume={7}, journal={Ernährungsumschau International}, author={Mesch,
C. and Stimming, M. and Wagner, A. and Libuda, Lars and Kersting, M.}, year={2013},
pages={110–115} }'
chicago: 'Mesch, C., M. Stimming, A. Wagner, Lars Libuda, and M. Kersting. “Rekrutierung
von Müttern mit Säuglingen in einer Interventionsstudie – erste Erkenntnisse aus
der PINGU-Studie. .” Ernährungsumschau International 7 (2013): 110–15.'
ieee: C. Mesch, M. Stimming, A. Wagner, L. Libuda, and M. Kersting, “Rekrutierung
von Müttern mit Säuglingen in einer Interventionsstudie – erste Erkenntnisse aus
der PINGU-Studie. ,” Ernährungsumschau International, vol. 7, pp. 110–115,
2013.
mla: Mesch, C., et al. “Rekrutierung von Müttern mit Säuglingen in einer Interventionsstudie
– erste Erkenntnisse aus der PINGU-Studie. .” Ernährungsumschau International,
vol. 7, 2013, pp. 110–15.
short: C. Mesch, M. Stimming, A. Wagner, L. Libuda, M. Kersting, Ernährungsumschau
International 7 (2013) 110–115.
date_created: 2021-11-19T09:36:55Z
date_updated: 2022-01-06T06:57:42Z
department:
- _id: '35'
- _id: '22'
- _id: '395'
intvolume: ' 7'
language:
- iso: ger
page: 110-115
publication: Ernährungsumschau International
publication_status: published
status: public
title: 'Rekrutierung von Müttern mit Säuglingen in einer Interventionsstudie – erste
Erkenntnisse aus der PINGU-Studie. '
type: journal_article
user_id: '49428'
volume: 7
year: '2013'
...
---
_id: '27732'
author:
- first_name: K.E.
full_name: Assmann, K.E.
last_name: Assmann
- first_name: G.
full_name: Joslowski, G.
last_name: Joslowski
- first_name: Anette
full_name: Buyken, Anette
id: '65985'
last_name: Buyken
- first_name: G.
full_name: Cheng, G.
last_name: Cheng
- first_name: T.
full_name: Remer, T.
last_name: Remer
- first_name: A.
full_name: Kroke, A.
last_name: Kroke
- first_name: A.L.B.
full_name: Günther, A.L.B.
last_name: Günther
citation:
ama: Assmann KE, Joslowski G, Buyken A, et al. Prospective association of protein
intake during puberty with body composition in young adulthood. Obesity.
Published online 2013:E782-E789. doi:10.1002/oby.20516
apa: Assmann, K. E., Joslowski, G., Buyken, A., Cheng, G., Remer, T., Kroke, A.,
& Günther, A. L. B. (2013). Prospective association of protein intake during
puberty with body composition in young adulthood. Obesity, E782–E789. https://doi.org/10.1002/oby.20516
bibtex: '@article{Assmann_Joslowski_Buyken_Cheng_Remer_Kroke_Günther_2013, title={Prospective
association of protein intake during puberty with body composition in young adulthood},
DOI={10.1002/oby.20516}, journal={Obesity},
author={Assmann, K.E. and Joslowski, G. and Buyken, Anette and Cheng, G. and Remer,
T. and Kroke, A. and Günther, A.L.B.}, year={2013}, pages={E782–E789} }'
chicago: Assmann, K.E., G. Joslowski, Anette Buyken, G. Cheng, T. Remer, A. Kroke,
and A.L.B. Günther. “Prospective Association of Protein Intake during Puberty
with Body Composition in Young Adulthood.” Obesity, 2013, E782–89. https://doi.org/10.1002/oby.20516.
ieee: 'K. E. Assmann et al., “Prospective association of protein intake during
puberty with body composition in young adulthood,” Obesity, pp. E782–E789,
2013, doi: 10.1002/oby.20516.'
mla: Assmann, K. E., et al. “Prospective Association of Protein Intake during Puberty
with Body Composition in Young Adulthood.” Obesity, 2013, pp. E782–89,
doi:10.1002/oby.20516.
short: K.E. Assmann, G. Joslowski, A. Buyken, G. Cheng, T. Remer, A. Kroke, A.L.B.
Günther, Obesity (2013) E782–E789.
date_created: 2021-11-23T16:01:14Z
date_updated: 2022-01-06T06:57:44Z
department:
- _id: '17'
- _id: '22'
- _id: '571'
doi: 10.1002/oby.20516
language:
- iso: eng
page: E782-E789
publication: Obesity
publication_identifier:
issn:
- 1930-7381
publication_status: published
status: public
title: Prospective association of protein intake during puberty with body composition
in young adulthood
type: journal_article
user_id: '61597'
year: '2013'
...
---
_id: '27733'
article_number: e79436
author:
- first_name: Anke L. B.
full_name: Günther, Anke L. B.
last_name: Günther
- first_name: Helena
full_name: Walz, Helena
last_name: Walz
- first_name: Anja
full_name: Kroke, Anja
last_name: Kroke
- first_name: Stefan A.
full_name: Wudy, Stefan A.
last_name: Wudy
- first_name: Christina
full_name: Riedel, Christina
last_name: Riedel
- first_name: Rüdiger
full_name: von Kries, Rüdiger
last_name: von Kries
- first_name: Gesa
full_name: Joslowski, Gesa
last_name: Joslowski
- first_name: Thomas
full_name: Remer, Thomas
last_name: Remer
- first_name: Guo
full_name: Cheng, Guo
last_name: Cheng
- first_name: Anette
full_name: Buyken, Anette
id: '65985'
last_name: Buyken
citation:
ama: Günther ALB, Walz H, Kroke A, et al. Breastfeeding and Its Prospective Association
with Components of the GH-IGF-Axis, Insulin Resistance and Body Adiposity Measures
in Young Adulthood – Insights from Linear and Quantile Regression Analysis. PLoS
ONE. Published online 2013. doi:10.1371/journal.pone.0079436
apa: Günther, A. L. B., Walz, H., Kroke, A., Wudy, S. A., Riedel, C., von Kries,
R., Joslowski, G., Remer, T., Cheng, G., & Buyken, A. (2013). Breastfeeding
and Its Prospective Association with Components of the GH-IGF-Axis, Insulin Resistance
and Body Adiposity Measures in Young Adulthood – Insights from Linear and Quantile
Regression Analysis. PLoS ONE, Article e79436. https://doi.org/10.1371/journal.pone.0079436
bibtex: '@article{Günther_Walz_Kroke_Wudy_Riedel_von Kries_Joslowski_Remer_Cheng_Buyken_2013,
title={Breastfeeding and Its Prospective Association with Components of the GH-IGF-Axis,
Insulin Resistance and Body Adiposity Measures in Young Adulthood – Insights from
Linear and Quantile Regression Analysis}, DOI={10.1371/journal.pone.0079436},
number={e79436}, journal={PLoS ONE}, author={Günther, Anke L. B. and Walz, Helena
and Kroke, Anja and Wudy, Stefan A. and Riedel, Christina and von Kries, Rüdiger
and Joslowski, Gesa and Remer, Thomas and Cheng, Guo and Buyken, Anette}, year={2013}
}'
chicago: Günther, Anke L. B., Helena Walz, Anja Kroke, Stefan A. Wudy, Christina
Riedel, Rüdiger von Kries, Gesa Joslowski, Thomas Remer, Guo Cheng, and Anette
Buyken. “Breastfeeding and Its Prospective Association with Components of the
GH-IGF-Axis, Insulin Resistance and Body Adiposity Measures in Young Adulthood
– Insights from Linear and Quantile Regression Analysis.” PLoS ONE, 2013.
https://doi.org/10.1371/journal.pone.0079436.
ieee: 'A. L. B. Günther et al., “Breastfeeding and Its Prospective Association
with Components of the GH-IGF-Axis, Insulin Resistance and Body Adiposity Measures
in Young Adulthood – Insights from Linear and Quantile Regression Analysis,” PLoS
ONE, Art. no. e79436, 2013, doi: 10.1371/journal.pone.0079436.'
mla: Günther, Anke L. B., et al. “Breastfeeding and Its Prospective Association
with Components of the GH-IGF-Axis, Insulin Resistance and Body Adiposity Measures
in Young Adulthood – Insights from Linear and Quantile Regression Analysis.” PLoS
ONE, e79436, 2013, doi:10.1371/journal.pone.0079436.
short: A.L.B. Günther, H. Walz, A. Kroke, S.A. Wudy, C. Riedel, R. von Kries, G.
Joslowski, T. Remer, G. Cheng, A. Buyken, PLoS ONE (2013).
date_created: 2021-11-23T16:02:57Z
date_updated: 2022-01-06T06:57:44Z
department:
- _id: '17'
- _id: '22'
- _id: '571'
doi: 10.1371/journal.pone.0079436
language:
- iso: eng
publication: PLoS ONE
publication_identifier:
issn:
- 1932-6203
publication_status: published
status: public
title: Breastfeeding and Its Prospective Association with Components of the GH-IGF-Axis,
Insulin Resistance and Body Adiposity Measures in Young Adulthood – Insights from
Linear and Quantile Regression Analysis
type: journal_article
user_id: '61597'
year: '2013'
...
---
_id: '11619'
abstract:
- lang: eng
text: "Reconfigurable circuit devices have opened up a fundamentally new way of
creating adaptable systems. Combined with artificial evolution, reconfigurable
circuits allow an elegant adaptation approach to compensating for changes in the
distribution of input data, computational resource errors, and variations in resource
requirements. Referred to as ``Evolvable Hardware'' (EHW), this paradigm has yielded
astonishing results for traditional engineering challenges and has discovered
intriguing design principles, which have not yet been seen in conventional engineering.\r\n\r\nIn
this thesis, we present new and fundamental work on Evolvable Hardware motivated
by the insight that Evolvable Hardware needs to compensate for events with different
change rates. To solve the challenge of different adaptation speeds, we propose
a unified adaptation approach based on multi-objective evolution, evolving and
propagating candidate solutions that are diverse in objectives that may experience
radical changes.\r\n\r\nFocusing on algorithmic aspects, we enable Cartesian Genetic
Programming (CGP) model, which we are using to encode Boolean circuits, for multi-objective
optimization by introducing a meaningful recombination operator. We improve the
scalability of CGP by objectives scaling, periodization of local- and global-search
algorithms, and the automatic acquisition and reuse of subfunctions using age-
and cone-based techniques. We validate our methods on the applications of adaptation
of hardware classifiers to resource changes, recognition of muscular signals for
prosthesis control and optimization of processor caches."
author:
- first_name: Paul
full_name: Kaufmann, Paul
last_name: Kaufmann
citation:
ama: 'Kaufmann P. Adapting Hardware Systems by Means of Multi-Objective Evolution.
Berlin: Logos Verlag Berlin GmbH; 2013.'
apa: 'Kaufmann, P. (2013). Adapting Hardware Systems by Means of Multi-Objective
Evolution. Berlin: Logos Verlag Berlin GmbH.'
bibtex: '@book{Kaufmann_2013, place={Berlin}, title={Adapting Hardware Systems by
Means of Multi-Objective Evolution}, publisher={Logos Verlag Berlin GmbH}, author={Kaufmann,
Paul}, year={2013} }'
chicago: 'Kaufmann, Paul. Adapting Hardware Systems by Means of Multi-Objective
Evolution. Berlin: Logos Verlag Berlin GmbH, 2013.'
ieee: 'P. Kaufmann, Adapting Hardware Systems by Means of Multi-Objective Evolution.
Berlin: Logos Verlag Berlin GmbH, 2013.'
mla: Kaufmann, Paul. Adapting Hardware Systems by Means of Multi-Objective Evolution.
Logos Verlag Berlin GmbH, 2013.
short: P. Kaufmann, Adapting Hardware Systems by Means of Multi-Objective Evolution,
Logos Verlag Berlin GmbH, Berlin, 2013.
date_created: 2019-07-11T11:51:51Z
date_updated: 2022-01-06T06:51:04Z
department:
- _id: '78'
language:
- iso: eng
page: '249'
place: Berlin
publication_identifier:
isbn:
- 978-3-8325-3530-8
publication_status: published
publisher: Logos Verlag Berlin GmbH
status: public
supervisor:
- first_name: Marco
full_name: Platzner, Marco
id: '398'
last_name: Platzner
title: Adapting Hardware Systems by Means of Multi-Objective Evolution
type: dissertation
user_id: '3118'
year: '2013'
...
---
_id: '17440'
author:
- first_name: Benjamin
full_name: Eikel, Benjamin
last_name: Eikel
citation:
ama: 'Eikel B. Spherical Visibility Sampling : Preprocessed Visibility for Occlusion
Culling in Complex 3D Scenes. Universität Paderborn; 2013.'
apa: 'Eikel, B. (2013). Spherical visibility sampling : preprocessed visibility
for occlusion culling in complex 3D scenes. Universität Paderborn.'
bibtex: '@book{Eikel_2013, place={Universität Paderborn}, title={Spherical visibility
sampling : preprocessed visibility for occlusion culling in complex 3D scenes},
author={Eikel, Benjamin}, year={2013} }'
chicago: 'Eikel, Benjamin. Spherical Visibility Sampling : Preprocessed Visibility
for Occlusion Culling in Complex 3D Scenes. Universität Paderborn, 2013.'
ieee: 'B. Eikel, Spherical visibility sampling : preprocessed visibility for
occlusion culling in complex 3D scenes. Universität Paderborn, 2013.'
mla: 'Eikel, Benjamin. Spherical Visibility Sampling : Preprocessed Visibility
for Occlusion Culling in Complex 3D Scenes. 2013.'
short: 'B. Eikel, Spherical Visibility Sampling : Preprocessed Visibility for Occlusion
Culling in Complex 3D Scenes, Universität Paderborn, 2013.'
date_created: 2020-07-29T09:11:23Z
date_updated: 2022-01-06T06:53:12Z
department:
- _id: '63'
language:
- iso: eng
place: Universität Paderborn
related_material:
link:
- relation: confirmation
url: http://nbn-resolving.de/urn:nbn:de:hbz:466:2-12683
status: public
supervisor:
- first_name: Friedhelm
full_name: Meyer auf der Heide, Friedhelm
id: '15523'
last_name: Meyer auf der Heide
title: 'Spherical visibility sampling : preprocessed visibility for occlusion culling
in complex 3D scenes'
type: dissertation
user_id: '15415'
year: '2013'
...
---
_id: '1799'
author:
- first_name: Hassan
full_name: Ali-Ahmad, Hassan
last_name: Ali-Ahmad
- first_name: Claudio
full_name: Cicconetti, Claudio
last_name: Cicconetti
- first_name: Antonio
full_name: de la Oliva, Antonio
last_name: de la Oliva
- first_name: Martin
full_name: Draxler, Martin
last_name: Draxler
- first_name: Rohit
full_name: Gupta, Rohit
last_name: Gupta
- first_name: Vincenzo
full_name: Mancuso, Vincenzo
last_name: Mancuso
- first_name: Laurent
full_name: Roullet, Laurent
last_name: Roullet
- first_name: Vincenzo
full_name: Sciancalepore, Vincenzo
last_name: Sciancalepore
citation:
ama: 'Ali-Ahmad H, Cicconetti C, de la Oliva A, et al. CROWD: An SDN Approach for
DenseNets. In: 2013 Second European Workshop on Software Defined Networks.
IEEE; 2013. doi:10.1109/ewsdn.2013.11'
apa: 'Ali-Ahmad, H., Cicconetti, C., de la Oliva, A., Draxler, M., Gupta, R., Mancuso,
V., … Sciancalepore, V. (2013). CROWD: An SDN Approach for DenseNets. In 2013
Second European Workshop on Software Defined Networks. IEEE. https://doi.org/10.1109/ewsdn.2013.11'
bibtex: '@inproceedings{Ali-Ahmad_Cicconetti_de la Oliva_Draxler_Gupta_Mancuso_Roullet_Sciancalepore_2013,
title={CROWD: An SDN Approach for DenseNets}, DOI={10.1109/ewsdn.2013.11},
booktitle={2013 Second European Workshop on Software Defined Networks}, publisher={IEEE},
author={Ali-Ahmad, Hassan and Cicconetti, Claudio and de la Oliva, Antonio and
Draxler, Martin and Gupta, Rohit and Mancuso, Vincenzo and Roullet, Laurent and
Sciancalepore, Vincenzo}, year={2013} }'
chicago: 'Ali-Ahmad, Hassan, Claudio Cicconetti, Antonio de la Oliva, Martin Draxler,
Rohit Gupta, Vincenzo Mancuso, Laurent Roullet, and Vincenzo Sciancalepore. “CROWD:
An SDN Approach for DenseNets.” In 2013 Second European Workshop on Software
Defined Networks. IEEE, 2013. https://doi.org/10.1109/ewsdn.2013.11.'
ieee: 'H. Ali-Ahmad et al., “CROWD: An SDN Approach for DenseNets,” in 2013
Second European Workshop on Software Defined Networks, 2013.'
mla: 'Ali-Ahmad, Hassan, et al. “CROWD: An SDN Approach for DenseNets.” 2013
Second European Workshop on Software Defined Networks, IEEE, 2013, doi:10.1109/ewsdn.2013.11.'
short: 'H. Ali-Ahmad, C. Cicconetti, A. de la Oliva, M. Draxler, R. Gupta, V. Mancuso,
L. Roullet, V. Sciancalepore, in: 2013 Second European Workshop on Software Defined
Networks, IEEE, 2013.'
date_created: 2018-03-27T07:43:19Z
date_updated: 2022-01-06T06:53:24Z
department:
- _id: '75'
doi: 10.1109/ewsdn.2013.11
ec_funded: '1'
project:
- _id: '22'
call_identifier: FP7-ICT-2011-C
grant_number: '318115'
name: Connectivity management for eneRgy Optimised Wireless Dense works
publication: 2013 Second European Workshop on Software Defined Networks
publication_identifier:
isbn:
- '9781479924332'
publication_status: published
publisher: IEEE
status: public
title: 'CROWD: An SDN Approach for DenseNets'
type: conference
user_id: '15572'
year: '2013'
...
---
_id: '1804'
author:
- first_name: Antonio
full_name: de la Oliva, Antonio
last_name: de la Oliva
- first_name: Arianna
full_name: Morelli, Arianna
last_name: Morelli
- first_name: Vincenzo
full_name: Mancuso, Vincenzo
last_name: Mancuso
- first_name: Martin
full_name: Draexler, Martin
last_name: Draexler
- first_name: Tim
full_name: Hentschel, Tim
last_name: Hentschel
- first_name: Telemaco
full_name: Melia, Telemaco
last_name: Melia
- first_name: Pierrick
full_name: Seite, Pierrick
last_name: Seite
- first_name: Claudio
full_name: Cicconetti, Claudio
last_name: Cicconetti
citation:
ama: 'de la Oliva A, Morelli A, Mancuso V, et al. Denser Networks for the Future
Internet, the CROWD Approach. In: Lecture Notes of the Institute for Computer
Sciences, Social Informatics and Telecommunications Engineering. Berlin, Heidelberg:
Springer Berlin Heidelberg; 2013:28-41. doi:10.1007/978-3-642-37935-2_3'
apa: 'de la Oliva, A., Morelli, A., Mancuso, V., Draexler, M., Hentschel, T., Melia,
T., … Cicconetti, C. (2013). Denser Networks for the Future Internet, the CROWD
Approach. In Lecture Notes of the Institute for Computer Sciences, Social Informatics
and Telecommunications Engineering (pp. 28–41). Berlin, Heidelberg: Springer
Berlin Heidelberg. https://doi.org/10.1007/978-3-642-37935-2_3'
bibtex: '@inbook{de la Oliva_Morelli_Mancuso_Draexler_Hentschel_Melia_Seite_Cicconetti_2013,
place={Berlin, Heidelberg}, title={Denser Networks for the Future Internet, the
CROWD Approach}, DOI={10.1007/978-3-642-37935-2_3},
booktitle={Lecture Notes of the Institute for Computer Sciences, Social Informatics
and Telecommunications Engineering}, publisher={Springer Berlin Heidelberg}, author={de
la Oliva, Antonio and Morelli, Arianna and Mancuso, Vincenzo and Draexler, Martin
and Hentschel, Tim and Melia, Telemaco and Seite, Pierrick and Cicconetti, Claudio},
year={2013}, pages={28–41} }'
chicago: 'Oliva, Antonio de la, Arianna Morelli, Vincenzo Mancuso, Martin Draexler,
Tim Hentschel, Telemaco Melia, Pierrick Seite, and Claudio Cicconetti. “Denser
Networks for the Future Internet, the CROWD Approach.” In Lecture Notes of
the Institute for Computer Sciences, Social Informatics and Telecommunications
Engineering, 28–41. Berlin, Heidelberg: Springer Berlin Heidelberg, 2013.
https://doi.org/10.1007/978-3-642-37935-2_3.'
ieee: 'A. de la Oliva et al., “Denser Networks for the Future Internet, the
CROWD Approach,” in Lecture Notes of the Institute for Computer Sciences, Social
Informatics and Telecommunications Engineering, Berlin, Heidelberg: Springer
Berlin Heidelberg, 2013, pp. 28–41.'
mla: de la Oliva, Antonio, et al. “Denser Networks for the Future Internet, the
CROWD Approach.” Lecture Notes of the Institute for Computer Sciences, Social
Informatics and Telecommunications Engineering, Springer Berlin Heidelberg,
2013, pp. 28–41, doi:10.1007/978-3-642-37935-2_3.
short: 'A. de la Oliva, A. Morelli, V. Mancuso, M. Draexler, T. Hentschel, T. Melia,
P. Seite, C. Cicconetti, in: Lecture Notes of the Institute for Computer Sciences,
Social Informatics and Telecommunications Engineering, Springer Berlin Heidelberg,
Berlin, Heidelberg, 2013, pp. 28–41.'
date_created: 2018-03-27T08:04:37Z
date_updated: 2022-01-06T06:53:25Z
department:
- _id: '75'
doi: 10.1007/978-3-642-37935-2_3
ec_funded: '1'
page: 28-41
place: Berlin, Heidelberg
project:
- _id: '22'
call_identifier: FP7-ICT-2011-C
grant_number: '318115'
name: Connectivity management for eneRgy Optimised Wireless Dense works
publication: Lecture Notes of the Institute for Computer Sciences, Social Informatics
and Telecommunications Engineering
publication_identifier:
isbn:
- '9783642379345'
- '9783642379352'
issn:
- 1867-8211
- 1867-822X
publication_status: published
publisher: Springer Berlin Heidelberg
status: public
title: Denser Networks for the Future Internet, the CROWD Approach
type: book_chapter
user_id: '15572'
year: '2013'
...
---
_id: '22378'
author:
- first_name: Tobias
full_name: Meyer, Tobias
last_name: Meyer
- first_name: Christian
full_name: Hölscher, Christian
last_name: Hölscher
- first_name: Michael
full_name: Menke, Michael
last_name: Menke
- first_name: Walter
full_name: Sextro, Walter
last_name: Sextro
- first_name: Detmar
full_name: Zimmer, Detmar
id: '604'
last_name: Zimmer
citation:
ama: 'Meyer T, Hölscher C, Menke M, Sextro W, Zimmer D. Multiobjective Optimization
including Safety of Operation Applied to a Linear Drive System. In: PAMM -
Proceedings in Applied Mathematics and Mechanics . Vol 13. Gesellschaft für
Angewandte Mathematik und Mechanik (GAMM); 2013:483-484. doi:10.1002/pamm.201310234'
apa: Meyer, T., Hölscher, C., Menke, M., Sextro, W., & Zimmer, D. (2013). Multiobjective
Optimization including Safety of Operation Applied to a Linear Drive System. In
PAMM - Proceedings in Applied Mathematics and Mechanics (Vol. 13, pp.
483–484). Gesellschaft für Angewandte Mathematik und Mechanik (GAMM). https://doi.org/10.1002/pamm.201310234
bibtex: '@inproceedings{Meyer_Hölscher_Menke_Sextro_Zimmer_2013, title={Multiobjective
Optimization including Safety of Operation Applied to a Linear Drive System},
volume={13}, DOI={10.1002/pamm.201310234},
number={1}, booktitle={PAMM - Proceedings in Applied Mathematics and Mechanics
}, publisher={Gesellschaft für Angewandte Mathematik und Mechanik (GAMM)}, author={Meyer,
Tobias and Hölscher, Christian and Menke, Michael and Sextro, Walter and Zimmer,
Detmar}, year={2013}, pages={483–484} }'
chicago: Meyer, Tobias, Christian Hölscher, Michael Menke, Walter Sextro, and Detmar
Zimmer. “Multiobjective Optimization Including Safety of Operation Applied to
a Linear Drive System.” In PAMM - Proceedings in Applied Mathematics and Mechanics
, 13:483–84. Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), 2013.
https://doi.org/10.1002/pamm.201310234.
ieee: T. Meyer, C. Hölscher, M. Menke, W. Sextro, and D. Zimmer, “Multiobjective
Optimization including Safety of Operation Applied to a Linear Drive System,”
in PAMM - Proceedings in Applied Mathematics and Mechanics , 2013, vol.
13, no. 1, pp. 483–484.
mla: Meyer, Tobias, et al. “Multiobjective Optimization Including Safety of Operation
Applied to a Linear Drive System.” PAMM - Proceedings in Applied Mathematics
and Mechanics , vol. 13, no. 1, Gesellschaft für Angewandte Mathematik und
Mechanik (GAMM), 2013, pp. 483–84, doi:10.1002/pamm.201310234.
short: 'T. Meyer, C. Hölscher, M. Menke, W. Sextro, D. Zimmer, in: PAMM - Proceedings
in Applied Mathematics and Mechanics , Gesellschaft für Angewandte Mathematik
und Mechanik (GAMM), 2013, pp. 483–484.'
date_created: 2021-06-15T11:09:01Z
date_updated: 2022-01-06T06:55:32Z
department:
- _id: '9'
- _id: '146'
doi: 10.1002/pamm.201310234
intvolume: ' 13'
issue: '1'
language:
- iso: eng
page: 483-484
publication: 'PAMM - Proceedings in Applied Mathematics and Mechanics '
publisher: Gesellschaft für Angewandte Mathematik und Mechanik (GAMM)
status: public
title: Multiobjective Optimization including Safety of Operation Applied to a Linear
Drive System
type: conference
user_id: '38077'
volume: 13
year: '2013'
...
---
_id: '23125'
author:
- first_name: Shaady
full_name: Khatab, Shaady
last_name: Khatab
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
citation:
ama: 'Khatab S, Trächtler A. Trajectory Optimization and Optimal Control of Vehicle
Dynamics under Critically Stable Driving Conditions. In: IEEE International
Conference on System Science and Engineering (ICSSE). IEEE Xplore; 2013:117-121.'
apa: Khatab, S., & Trächtler, A. (2013). Trajectory Optimization and Optimal
Control of Vehicle Dynamics under Critically Stable Driving Conditions. In IEEE
International Conference on System Science and Engineering (ICSSE) (pp. 117–121).
IEEE Xplore.
bibtex: '@inproceedings{Khatab_Trächtler_2013, title={Trajectory Optimization and
Optimal Control of Vehicle Dynamics under Critically Stable Driving Conditions},
booktitle={IEEE International Conference on System Science and Engineering (ICSSE)},
publisher={IEEE Xplore}, author={Khatab, Shaady and Trächtler, Ansgar}, year={2013},
pages={117–121} }'
chicago: Khatab, Shaady, and Ansgar Trächtler. “Trajectory Optimization and Optimal
Control of Vehicle Dynamics under Critically Stable Driving Conditions.” In IEEE
International Conference on System Science and Engineering (ICSSE), 117–21.
IEEE Xplore, 2013.
ieee: S. Khatab and A. Trächtler, “Trajectory Optimization and Optimal Control of
Vehicle Dynamics under Critically Stable Driving Conditions,” in IEEE International
Conference on System Science and Engineering (ICSSE), 2013, pp. 117–121.
mla: Khatab, Shaady, and Ansgar Trächtler. “Trajectory Optimization and Optimal
Control of Vehicle Dynamics under Critically Stable Driving Conditions.” IEEE
International Conference on System Science and Engineering (ICSSE), IEEE Xplore,
2013, pp. 117–21.
short: 'S. Khatab, A. Trächtler, in: IEEE International Conference on System Science
and Engineering (ICSSE), IEEE Xplore, 2013, pp. 117–121.'
date_created: 2021-08-09T06:57:53Z
date_updated: 2022-01-06T06:55:46Z
department:
- _id: '153'
language:
- iso: eng
page: 117 - 121
publication: IEEE International Conference on System Science and Engineering (ICSSE)
publisher: IEEE Xplore
status: public
title: Trajectory Optimization and Optimal Control of Vehicle Dynamics under Critically
Stable Driving Conditions
type: conference
user_id: '24876'
year: '2013'
...
---
_id: '23148'
author:
- first_name: Peter
full_name: Reinold, Peter
last_name: Reinold
- first_name: Walter
full_name: Sextro, Walter
last_name: Sextro
- first_name: Christoph
full_name: Sondermann-Wölke, Christoph
last_name: Sondermann-Wölke
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
citation:
ama: 'Reinold P, Sextro W, Sondermann-Wölke C, Trächtler A. Dependability-oriented
Multiobjective Optimization. In: Dependability of Self-Optimizing Mechatronic
Systems. Springer-Verlag, Heidelberg, Germany; 2013:131-135.'
apa: Reinold, P., Sextro, W., Sondermann-Wölke, C., & Trächtler, A. (2013).
Dependability-oriented Multiobjective Optimization. In Dependability of Self-Optimizing
Mechatronic Systems (pp. 131–135). Springer-Verlag, Heidelberg, Germany.
bibtex: '@inbook{Reinold_Sextro_Sondermann-Wölke_Trächtler_2013, title={Dependability-oriented
Multiobjective Optimization}, booktitle={Dependability of Self-Optimizing Mechatronic
Systems}, publisher={Springer-Verlag, Heidelberg, Germany}, author={Reinold, Peter
and Sextro, Walter and Sondermann-Wölke, Christoph and Trächtler, Ansgar}, year={2013},
pages={131–135} }'
chicago: Reinold, Peter, Walter Sextro, Christoph Sondermann-Wölke, and Ansgar Trächtler.
“Dependability-Oriented Multiobjective Optimization.” In Dependability of Self-Optimizing
Mechatronic Systems, 131–35. Springer-Verlag, Heidelberg, Germany, 2013.
ieee: P. Reinold, W. Sextro, C. Sondermann-Wölke, and A. Trächtler, “Dependability-oriented
Multiobjective Optimization,” in Dependability of Self-Optimizing Mechatronic
Systems, Springer-Verlag, Heidelberg, Germany, 2013, pp. 131–135.
mla: Reinold, Peter, et al. “Dependability-Oriented Multiobjective Optimization.”
Dependability of Self-Optimizing Mechatronic Systems, Springer-Verlag,
Heidelberg, Germany, 2013, pp. 131–35.
short: 'P. Reinold, W. Sextro, C. Sondermann-Wölke, A. Trächtler, in: Dependability
of Self-Optimizing Mechatronic Systems, Springer-Verlag, Heidelberg, Germany,
2013, pp. 131–135.'
date_created: 2021-08-09T06:58:20Z
date_updated: 2022-01-06T06:55:46Z
department:
- _id: '153'
language:
- iso: eng
page: 131-135
publication: Dependability of Self-Optimizing Mechatronic Systems
publisher: Springer-Verlag, Heidelberg, Germany
status: public
title: Dependability-oriented Multiobjective Optimization
type: book_chapter
user_id: '24876'
year: '2013'
...
---
_id: '8789'
author:
- first_name: Dirk
full_name: Reuter, Dirk
id: '37763'
last_name: Reuter
- first_name: Gerhard
full_name: Gerth, Gerhard
last_name: Gerth
- first_name: J.
full_name: Kirschner, J.
last_name: Kirschner
citation:
ama: 'Reuter D, Gerth G, Kirschner J. Surface Diffusion of 3d-Metals on W(110).
In: Surface Diffusion. Boston, MA; 2013. doi:10.1007/978-1-4899-0262-7_43'
apa: Reuter, D., Gerth, G., & Kirschner, J. (2013). Surface Diffusion of 3d-Metals
on W(110). In Surface Diffusion. Boston, MA. https://doi.org/10.1007/978-1-4899-0262-7_43
bibtex: '@inbook{Reuter_Gerth_Kirschner_2013, place={Boston, MA}, title={Surface
Diffusion of 3d-Metals on W(110)}, DOI={10.1007/978-1-4899-0262-7_43},
booktitle={Surface Diffusion}, author={Reuter, Dirk and Gerth, Gerhard and Kirschner,
J.}, year={2013} }'
chicago: Reuter, Dirk, Gerhard Gerth, and J. Kirschner. “Surface Diffusion of 3d-Metals
on W(110).” In Surface Diffusion. Boston, MA, 2013. https://doi.org/10.1007/978-1-4899-0262-7_43.
ieee: D. Reuter, G. Gerth, and J. Kirschner, “Surface Diffusion of 3d-Metals on
W(110),” in Surface Diffusion, Boston, MA, 2013.
mla: Reuter, Dirk, et al. “Surface Diffusion of 3d-Metals on W(110).” Surface
Diffusion, 2013, doi:10.1007/978-1-4899-0262-7_43.
short: 'D. Reuter, G. Gerth, J. Kirschner, in: Surface Diffusion, Boston, MA, 2013.'
date_created: 2019-04-01T08:44:17Z
date_updated: 2022-01-06T07:04:00Z
department:
- _id: '15'
- _id: '230'
doi: 10.1007/978-1-4899-0262-7_43
language:
- iso: eng
place: Boston, MA
publication: Surface Diffusion
publication_identifier:
isbn:
- '9781489902641'
- '9781489902627'
issn:
- 0258-1221
publication_status: published
status: public
title: Surface Diffusion of 3d-Metals on W(110)
type: book_chapter
user_id: '42514'
year: '2013'
...
---
_id: '9807'
abstract:
- lang: eng
text: Recently, focus on maintenance strategies has been shifted towards prognostic
health management (PHM) and a number of state of the art algorithms based on data-driven
prognostics have been developed to predict the health states of degrading components
based on sensory data. Amongst these algorithms, Multiclass Support Vector Machines
(MC-SVM) has gained popularity due to its relatively high classification accuracy,
ability to classify multiple patterns and capability to handle noisy /incomplete
data. However, its application is limited by the difficulty in determining the
required kernel function and penalty parameters. To address this problem, this
paper proposes a hybrid differential evolution -- particle swarm optimization
(DE-PSO) algorithm to optimize the MC-SVM kernel function and penalty parameters.
The differential algorithm (DE) obtains the search limit for the SVM parameters,
while the particle swarm optimization algorithm (PSO) determines the global optimum
parameters for a given training data set. Since degrading machinery components
display several degradation stages in their lifetime, the MC-SVM trained with
optimum parameters are used to estimate the health states of a degrading machinery
component, from which the remaining useful life (RUL) is predicted. This method
improves the classification accuracy of MC-SVM in predicting the health states
of a machinery component and consequently increases the accuracy of RUL predictions.
The feasibility of the method is validated using bearing prognostic run-to-failure
data obtained from NASA public data repository. A comparative study between MC-SVM
with parameters obtained using simple grid search with n-fold cross validation
and MCSVM with DE-PSO based on prognostic performance metrics reveals that the
proposed method has better performance, with all the cases considered falling
within a 10 \% error margin. The method also outperforms other soft computing
methods proposed in literature.
author:
- first_name: James Kuria
full_name: Kimotho, James Kuria
last_name: Kimotho
- first_name: Christopher
full_name: Sondermann-Wölke, Christopher
last_name: Sondermann-Wölke
- first_name: Tobias
full_name: Meyer, Tobias
last_name: Meyer
- first_name: Walter
full_name: Sextro, Walter
id: '21220'
last_name: Sextro
citation:
ama: Kimotho JK, Sondermann-Wölke C, Meyer T, Sextro W. Machinery Prognostic Method
Based on Multi-Class Support Vector Machines and Hybrid Differential Evolution
-- Particle Swarm Optimization. Chemical Engineering Transactions. 2013;33:619-624.
doi:10.3303/CET1333104
apa: Kimotho, J. K., Sondermann-Wölke, C., Meyer, T., & Sextro, W. (2013). Machinery
Prognostic Method Based on Multi-Class Support Vector Machines and Hybrid Differential
Evolution -- Particle Swarm Optimization. Chemical Engineering Transactions,
33, 619–624. https://doi.org/10.3303/CET1333104
bibtex: '@article{Kimotho_Sondermann-Wölke_Meyer_Sextro_2013, title={Machinery Prognostic
Method Based on Multi-Class Support Vector Machines and Hybrid Differential Evolution
-- Particle Swarm Optimization}, volume={33}, DOI={10.3303/CET1333104},
journal={Chemical Engineering Transactions}, author={Kimotho, James Kuria and
Sondermann-Wölke, Christopher and Meyer, Tobias and Sextro, Walter}, year={2013},
pages={619–624} }'
chicago: 'Kimotho, James Kuria, Christopher Sondermann-Wölke, Tobias Meyer, and
Walter Sextro. “Machinery Prognostic Method Based on Multi-Class Support Vector
Machines and Hybrid Differential Evolution -- Particle Swarm Optimization.” Chemical
Engineering Transactions 33 (2013): 619–24. https://doi.org/10.3303/CET1333104.'
ieee: J. K. Kimotho, C. Sondermann-Wölke, T. Meyer, and W. Sextro, “Machinery Prognostic
Method Based on Multi-Class Support Vector Machines and Hybrid Differential Evolution
-- Particle Swarm Optimization,” Chemical Engineering Transactions, vol.
33, pp. 619–624, 2013.
mla: Kimotho, James Kuria, et al. “Machinery Prognostic Method Based on Multi-Class
Support Vector Machines and Hybrid Differential Evolution -- Particle Swarm Optimization.”
Chemical Engineering Transactions, vol. 33, 2013, pp. 619–24, doi:10.3303/CET1333104.
short: J.K. Kimotho, C. Sondermann-Wölke, T. Meyer, W. Sextro, Chemical Engineering
Transactions 33 (2013) 619–624.
date_created: 2019-05-13T14:13:26Z
date_updated: 2022-01-06T07:04:21Z
department:
- _id: '151'
doi: 10.3303/CET1333104
intvolume: ' 33'
language:
- iso: eng
page: 619-624
publication: Chemical Engineering Transactions
status: public
title: Machinery Prognostic Method Based on Multi-Class Support Vector Machines and
Hybrid Differential Evolution -- Particle Swarm Optimization
type: journal_article
user_id: '55222'
volume: 33
year: '2013'
...
---
_id: '9808'
abstract:
- lang: eng
text: This study presents the methods employed by a team from the department of
Mechatronics and Dynamics at the University of Paderborn, Germany for the 2013
PHM data challenge. The focus of the challenge was on maintenance action recommendation
for an industrial machinery based on remote monitoring and diagnosis. Since an
ensemble of data driven methods has been considered as the state of the art approach
in diagnosis and prognosis, the first approach was to evaluate the performance
of an ensemble of data driven methods using the parametric data as input and problems
(recommended maintenance action) as the output. Due to close correlation of parametric
data of different problems, this approach produced high misclassification rate.
Event-based decision trees were then constructed to identify problems associated
with particular events. To distinguish between problems associated with events
that appeared in multiple problems, support vector machine (SVM) with parameters
optimally tuned using particle swarm optimization (PSO) was employed. Parametric
data was used as the input to the SVM algorithm and majority voting was employed
to determine the final decision for cases with multiple events. A total of 165
SVM models were constructed. This approach improved the overall score from 21
to 48. The method was further enhanced by employing an ensemble of three data
driven methods, that is, SVM, random forests (RF) and bagged trees (BT), to build
the event based models. With this approach, a score of 51 was obtained . The results
demonstrate that the proposed event based method can be effective in maintenance
action recommendation based on events codes and parametric data acquired remotely
from an industrial equipment.
author:
- first_name: James Kuria
full_name: Kimotho, James Kuria
last_name: Kimotho
- first_name: Chritoph
full_name: Sondermann-Wölke, Chritoph
last_name: Sondermann-Wölke
- first_name: Tobias
full_name: Meyer, Tobias
last_name: Meyer
- first_name: Walter
full_name: Sextro, Walter
id: '21220'
last_name: Sextro
citation:
ama: Kimotho JK, Sondermann-Wölke C, Meyer T, Sextro W. Application of Event Based
Decision Tree and Ensemble of Data Driven Methods for Maintenance Action Recommendation.
International Journal of Prognostics and Health Management. 2013;4(2).
apa: Kimotho, J. K., Sondermann-Wölke, C., Meyer, T., & Sextro, W. (2013). Application
of Event Based Decision Tree and Ensemble of Data Driven Methods for Maintenance
Action Recommendation. International Journal of Prognostics and Health Management,
4(2).
bibtex: '@article{Kimotho_Sondermann-Wölke_Meyer_Sextro_2013, title={Application
of Event Based Decision Tree and Ensemble of Data Driven Methods for Maintenance
Action Recommendation}, volume={4}, number={2}, journal={International Journal
of Prognostics and Health Management}, author={Kimotho, James Kuria and Sondermann-Wölke,
Chritoph and Meyer, Tobias and Sextro, Walter}, year={2013} }'
chicago: Kimotho, James Kuria, Chritoph Sondermann-Wölke, Tobias Meyer, and Walter
Sextro. “Application of Event Based Decision Tree and Ensemble of Data Driven
Methods for Maintenance Action Recommendation.” International Journal of Prognostics
and Health Management 4, no. 2 (2013).
ieee: J. K. Kimotho, C. Sondermann-Wölke, T. Meyer, and W. Sextro, “Application
of Event Based Decision Tree and Ensemble of Data Driven Methods for Maintenance
Action Recommendation,” International Journal of Prognostics and Health Management,
vol. 4, no. 2, 2013.
mla: Kimotho, James Kuria, et al. “Application of Event Based Decision Tree and
Ensemble of Data Driven Methods for Maintenance Action Recommendation.” International
Journal of Prognostics and Health Management, vol. 4, no. 2, 2013.
short: J.K. Kimotho, C. Sondermann-Wölke, T. Meyer, W. Sextro, International Journal
of Prognostics and Health Management 4 (2013).
date_created: 2019-05-13T14:15:36Z
date_updated: 2022-01-06T07:04:21Z
department:
- _id: '151'
intvolume: ' 4'
issue: '2'
keyword:
- maintenance decision
- Bagged trees
- Decision trees
- PSO-SVM
- Random forests
language:
- iso: eng
publication: International Journal of Prognostics and Health Management
quality_controlled: '1'
status: public
title: Application of Event Based Decision Tree and Ensemble of Data Driven Methods
for Maintenance Action Recommendation
type: journal_article
user_id: '55222'
volume: 4
year: '2013'
...
---
_id: '9858'
abstract:
- lang: eng
text: In this contribution, we introduce a multiobjective optimization used to calculate
safe optimal working points for a mechatronic system by including stochastic safety-critical
signals in an objective function. Our application example consists of a linear
drive for a rail-bound vehicle and an actuation unit. The linear drive's secondary
part is fixed; the primary part is vehicle-mounted and can be adjusted vertically
to account for deviations of the height of the secondary part. A small air gap
between both parts improves efficiency, but increases the risk of a collision
between the two parts. Using height data of the secondary part, a trajectory for
the vertical adjustment of the primary part is calculated. However, unexpected
deviations necessitate a readjustment of the air gap. The probability of such
unexpected height deviations can be calculated from the readjustment data. The
system is equipped with sensors to measure the air gap. Assuming that the sensor
noise is normally distributed, noise characteristics are determined. Using this
information and the probability distribution of unexpected height deviations,
the probability of a collision is determined.T he sensor noise and the probability
of a collision between both parts of the linear drive are included in the dynamical
model of the system. Using multiobjective optimization, pareto-optimal working
points for the controller of the air gap are obtained. By selecting an appropriate
working point, safe operation can be ensured.
author:
- first_name: Tobias
full_name: Meyer, Tobias
last_name: Meyer
- first_name: Christina
full_name: Hölscher, Christina
last_name: Hölscher
- first_name: Michael
full_name: Menke, Michael
last_name: Menke
- first_name: Walter
full_name: Sextro, Walter
id: '21220'
last_name: Sextro
- first_name: Detmar
full_name: Zimmer, Detmar
last_name: Zimmer
citation:
ama: 'Meyer T, Hölscher C, Menke M, Sextro W, Zimmer D. Multiobjective Optimization
including Safety of Operation Applied to a Linear Drive System. In: Proc. Appl.
Math. Mech. Vol 13. ; 2013:483-484. doi:10.1002/pamm.201310234'
apa: Meyer, T., Hölscher, C., Menke, M., Sextro, W., & Zimmer, D. (2013). Multiobjective
Optimization including Safety of Operation Applied to a Linear Drive System. In
Proc. Appl. Math. Mech. (Vol. 13, pp. 483–484). https://doi.org/10.1002/pamm.201310234
bibtex: '@inproceedings{Meyer_Hölscher_Menke_Sextro_Zimmer_2013, title={Multiobjective
Optimization including Safety of Operation Applied to a Linear Drive System},
volume={13}, DOI={10.1002/pamm.201310234},
booktitle={Proc. Appl. Math. Mech.}, author={Meyer, Tobias and Hölscher, Christina
and Menke, Michael and Sextro, Walter and Zimmer, Detmar}, year={2013}, pages={483–484}
}'
chicago: Meyer, Tobias, Christina Hölscher, Michael Menke, Walter Sextro, and Detmar
Zimmer. “Multiobjective Optimization Including Safety of Operation Applied to
a Linear Drive System.” In Proc. Appl. Math. Mech., 13:483–84, 2013. https://doi.org/10.1002/pamm.201310234.
ieee: T. Meyer, C. Hölscher, M. Menke, W. Sextro, and D. Zimmer, “Multiobjective
Optimization including Safety of Operation Applied to a Linear Drive System,”
in Proc. Appl. Math. Mech., 2013, vol. 13, pp. 483–484.
mla: Meyer, Tobias, et al. “Multiobjective Optimization Including Safety of Operation
Applied to a Linear Drive System.” Proc. Appl. Math. Mech., vol. 13, 2013,
pp. 483–84, doi:10.1002/pamm.201310234.
short: 'T. Meyer, C. Hölscher, M. Menke, W. Sextro, D. Zimmer, in: Proc. Appl. Math.
Mech., 2013, pp. 483–484.'
date_created: 2019-05-20T11:10:20Z
date_updated: 2019-05-20T11:12:54Z
department:
- _id: '151'
doi: 10.1002/pamm.201310234
intvolume: ' 13'
language:
- iso: eng
page: 483-484
publication: Proc. Appl. Math. Mech.
status: public
title: Multiobjective Optimization including Safety of Operation Applied to a Linear
Drive System
type: conference
user_id: '55222'
volume: 13
year: '2013'
...
---
_id: '9859'
abstract:
- lang: eng
text: Self-optimizing mechatronic systems allow the adaptation of the system's behavior
to the current situation. This can be used to actively adapt the behavior to the
current degradation state of the system or of some of its components. To this
end, the Multi-Level Dependability Concept has been developed. In this contribution,
we show how the Multi-Level Dependability Concept has been applied to the active
suspension module of an innovative rail-bound vehicle. For this module, the usage
of control reconfiguration, which is a novel approach to exploit complex redundancy
systems, is required. We show that by combining self-optimization with the possibilities
given by control reconfiguration, the dependability of a complex mechatronic system
can be greatly improved.
author:
- first_name: Tobias
full_name: Meyer , Tobias
last_name: 'Meyer '
- first_name: Jan
full_name: Henning Keßler, Jan
last_name: Henning Keßler
- first_name: Walter
full_name: Sextro, Walter
id: '21220'
last_name: Sextro
- first_name: Ansgar
full_name: Trächtler, Ansgar
last_name: Trächtler
citation:
ama: 'Meyer T, Henning Keßler J, Sextro W, Trächtler A. Increasing Intelligent
Systems’ Reliability by Using Reconfiguration. In: Proceedings of the Annual
Reliability and Maintainability Symposium (RAMS). Orlando, FL; 2013. doi:10.1109/RAMS.2013.6517636'
apa: Meyer , T., Henning Keßler, J., Sextro, W., & Trächtler, A. (2013). Increasing
Intelligent Systems’ Reliability by Using Reconfiguration. In Proceedings of
the Annual Reliability and Maintainability Symposium (RAMS). Orlando, FL.
https://doi.org/10.1109/RAMS.2013.6517636
bibtex: '@inproceedings{Meyer _Henning Keßler_Sextro_Trächtler_2013, place={Orlando,
FL}, title={Increasing Intelligent Systems’ Reliability by Using Reconfiguration},
DOI={10.1109/RAMS.2013.6517636},
booktitle={Proceedings of the Annual Reliability and Maintainability Symposium
(RAMS)}, author={Meyer , Tobias and Henning Keßler, Jan and Sextro, Walter and
Trächtler, Ansgar}, year={2013} }'
chicago: Meyer , Tobias, Jan Henning Keßler, Walter Sextro, and Ansgar Trächtler.
“Increasing Intelligent Systems’ Reliability by Using Reconfiguration.” In Proceedings
of the Annual Reliability and Maintainability Symposium (RAMS). Orlando, FL,
2013. https://doi.org/10.1109/RAMS.2013.6517636.
ieee: T. Meyer , J. Henning Keßler, W. Sextro, and A. Trächtler, “Increasing Intelligent
Systems’ Reliability by Using Reconfiguration,” in Proceedings of the Annual
Reliability and Maintainability Symposium (RAMS), 2013.
mla: Meyer , Tobias, et al. “Increasing Intelligent Systems’ Reliability by Using
Reconfiguration.” Proceedings of the Annual Reliability and Maintainability
Symposium (RAMS), 2013, doi:10.1109/RAMS.2013.6517636.
short: 'T. Meyer , J. Henning Keßler, W. Sextro, A. Trächtler, in: Proceedings of
the Annual Reliability and Maintainability Symposium (RAMS), Orlando, FL, 2013.'
date_created: 2019-05-20T11:13:14Z
date_updated: 2019-09-16T11:22:45Z
department:
- _id: '151'
doi: 10.1109/RAMS.2013.6517636
language:
- iso: eng
place: Orlando, FL
publication: Proceedings of the Annual Reliability and Maintainability Symposium (RAMS)
quality_controlled: '1'
status: public
title: Increasing Intelligent Systems' Reliability by Using Reconfiguration
type: conference
user_id: '55222'
year: '2013'
...
---
_id: '9860'
abstract:
- lang: eng
text: Self-optimizing mechatronic systems offer possibilities well beyond those
of traditional mechatronic systems. Among these is the adaptation of the system
behavior to the current situation. To do so, they are able to choose from different
working points, which are pre-calculated using multiobjective optimization and
are thus Pareto-optimal with regard to the chosen objective functions. In this
contribution, a method is presented that allows to continuously control the system
degradation by adapting the behavior of a selfoptimizing system throughout its
complete lifetime. The current remaining useful lifetime is estimated and then
related to the spent lifetime and the desired useful lifetime. Using this information,
a reliability-related objective is prioritized using a closed-loop control, which
in turn is used to determine the working point of the self-optimizing system.
This way, the desired useful lifetime can be achieved. To exemplify the setup
of the controller structure and to demonstrate the adaptation of the system behavior,
a dynamic model of a clutch system is used. It can be seen that the closed loop
controller is able to correct for external perturbations, such as changed requirements,
as well as changed system parameters. This way, the modeled system is able to
achieve the desired lifetime reliably.
author:
- first_name: Tobias
full_name: Meyer, Tobias
last_name: Meyer
- first_name: Christoph
full_name: Sondermann-Wölke, Christoph
last_name: Sondermann-Wölke
- first_name: James Kuria
full_name: Kimotho, James Kuria
last_name: Kimotho
- first_name: Walter
full_name: Sextro, Walter
id: '21220'
last_name: Sextro
citation:
ama: Meyer T, Sondermann-Wölke C, Kimotho JK, Sextro W. Controlling the Remaining
Useful Lifetime using Self-Optimization. Chemical Engineering Transactions.
2013;33:625-630. doi:10.3303/CET1333105
apa: Meyer, T., Sondermann-Wölke, C., Kimotho, J. K., & Sextro, W. (2013). Controlling
the Remaining Useful Lifetime using Self-Optimization. Chemical Engineering
Transactions, 33, 625–630. https://doi.org/10.3303/CET1333105
bibtex: '@article{Meyer_Sondermann-Wölke_Kimotho_Sextro_2013, title={Controlling
the Remaining Useful Lifetime using Self-Optimization}, volume={33}, DOI={10.3303/CET1333105},
journal={Chemical Engineering Transactions}, author={Meyer, Tobias and Sondermann-Wölke,
Christoph and Kimotho, James Kuria and Sextro, Walter}, year={2013}, pages={625–630}
}'
chicago: 'Meyer, Tobias, Christoph Sondermann-Wölke, James Kuria Kimotho, and Walter
Sextro. “Controlling the Remaining Useful Lifetime Using Self-Optimization.” Chemical
Engineering Transactions 33 (2013): 625–30. https://doi.org/10.3303/CET1333105.'
ieee: T. Meyer, C. Sondermann-Wölke, J. K. Kimotho, and W. Sextro, “Controlling
the Remaining Useful Lifetime using Self-Optimization,” Chemical Engineering
Transactions, vol. 33, pp. 625–630, 2013.
mla: Meyer, Tobias, et al. “Controlling the Remaining Useful Lifetime Using Self-Optimization.”
Chemical Engineering Transactions, vol. 33, 2013, pp. 625–30, doi:10.3303/CET1333105.
short: T. Meyer, C. Sondermann-Wölke, J.K. Kimotho, W. Sextro, Chemical Engineering
Transactions 33 (2013) 625–630.
date_created: 2019-05-20T11:15:59Z
date_updated: 2019-09-16T11:20:50Z
department:
- _id: '151'
doi: 10.3303/CET1333105
intvolume: ' 33'
language:
- iso: eng
page: 625-630
publication: Chemical Engineering Transactions
quality_controlled: '1'
status: public
title: Controlling the Remaining Useful Lifetime using Self-Optimization
type: journal_article
user_id: '55222'
volume: 33
year: '2013'
...
---
_id: '9863'
abstract:
- lang: eng
text: The 9th International Workshop on Piezoelectric Materials and Applications
in Actuators (IWPMA 2012) was successfully held on 22–25 April 2012 in Hirosaki,
Japan. The general chair was Prof. M.K. Kurosawa from the Tokyo Institute of Technology,
Japan. In the past, Korea, Germany, Turkey, China, and USA have hosted the annual
conference, but this was the first time for the annual IWPMA conference to be
held in Japan. The IWPMA 2012 was organized as a joint symposium with JTTAS Smart
Actuator/Sensor Study Committee and ICAT International Actuator Symposium. More
than 150 people from the world (12 countries) participated and had fruitful discussions
with 138 presentations including 11 invited talks. In addition to piezoelectric
materials and piezoelectric actuators, the presentation topics were expanded to
include solid-state actuators, energy harvesting, multifunctional materials, and
other current important issues. It is our honor to pronounce that the “Sensors
and Actuators A” journal has published this special issue on the IWPMA 2012 including
the best 25 contributions. This issue covers the functional materials, such as
piezoelectric and magnetostrictive materials, and their applications. However,
for the innovative devices, various ideas concerning materials, mechanisms, designs,
fabrication process, and control-systems are also required to be organically combined.
From the view of this concept, we believe the published 25 papers can excite the
researcher's intellectual curiosity concerning these issues and can serve as the
driving force for further breakthroughs. Please enjoy the latest research results
selected by our editor team. Finally, we appreciate all participants in the IWPMA
2012 and the devoted reviewers for the publication. We hope that the papers in
this special issue will open up the next researches, which will be presented in
the future IWPMA conferences.
citation:
ama: Morita T, Hemsel T, Ijima T, et al., eds. Selected Papers from the 9th International
Workshop on Piezoelectric Materials and Applications in Actuators. Vol 200.
Elsevier; 2013:1-172. doi:10.1016/j.sna.2013.06.017
apa: 'Morita, T., Hemsel, T., Ijima, T., Jeong, D. Y., Kanda, T., Twiefel, J., …
Lallart, M. (Eds.). (2013). Selected Papers from the 9th International Workshop
on Piezoelectric Materials and Applications in Actuators. Sensors and Actuators
A: Physical (Vol. 200, pp. 1–172). Hirosaki: Elsevier. https://doi.org/10.1016/j.sna.2013.06.017'
bibtex: '@book{Morita_Hemsel_Ijima_Jeong_Kanda_Twiefel_Uzgur_Lallart_2013, title={Selected
Papers from the 9th International Workshop on Piezoelectric Materials and Applications
in Actuators}, volume={200}, DOI={10.1016/j.sna.2013.06.017},
journal={Sensors and Actuators A: Physical}, publisher={Elsevier}, year={2013},
pages={1–172} }'
chicago: 'Morita, Takeshi, Tobias Hemsel, T. Ijima, D. Y. Jeong, T. Kanda, Jens
Twiefel, E. Uzgur, and M. Lallart, eds. Selected Papers from the 9th International
Workshop on Piezoelectric Materials and Applications in Actuators. Sensors
and Actuators A: Physical. Vol. 200. Elsevier, 2013. https://doi.org/10.1016/j.sna.2013.06.017.'
ieee: T. Morita et al., Eds., Selected Papers from the 9th International
Workshop on Piezoelectric Materials and Applications in Actuators, vol. 200.
Elsevier, 2013, pp. 1–172.
mla: 'Morita, Takeshi, et al., editors. “Selected Papers from the 9th International
Workshop on Piezoelectric Materials and Applications in Actuators.” Sensors
and Actuators A: Physical, vol. 200, Elsevier, 2013, pp. 1–172, doi:10.1016/j.sna.2013.06.017.'
short: T. Morita, T. Hemsel, T. Ijima, D.Y. Jeong, T. Kanda, J. Twiefel, E. Uzgur,
M. Lallart, eds., Selected Papers from the 9th International Workshop on Piezoelectric
Materials and Applications in Actuators, Elsevier, 2013.
conference:
end_date: 2012-04-25
location: Hirosaki
name: International Workshop on Piezoelectric Materials and Applications in Actuators
start_date: 2012-04-22
date_created: 2019-05-20T11:56:03Z
date_updated: 2020-12-18T11:19:37Z
department:
- _id: '151'
doi: 10.1016/j.sna.2013.06.017
editor:
- first_name: Takeshi
full_name: Morita, Takeshi
last_name: Morita
- first_name: Tobias
full_name: Hemsel, Tobias
id: '210'
last_name: Hemsel
- first_name: T.
full_name: Ijima, T.
last_name: Ijima
- first_name: D. Y.
full_name: Jeong, D. Y.
last_name: Jeong
- first_name: T.
full_name: Kanda, T.
last_name: Kanda
- first_name: Jens
full_name: Twiefel, Jens
last_name: Twiefel
- first_name: E.
full_name: Uzgur, E.
last_name: Uzgur
- first_name: M.
full_name: Lallart, M.
last_name: Lallart
intvolume: ' 200'
language:
- iso: eng
page: 1-172
publication: 'Sensors and Actuators A: Physical'
publisher: Elsevier
quality_controlled: '1'
status: public
title: Selected Papers from the 9th International Workshop on Piezoelectric Materials
and Applications in Actuators
type: journal_editor
user_id: '210'
volume: 200
year: '2013'
...
---
_id: '9866'
abstract:
- lang: eng
text: The hydrothermal method utilizes a solution-based chemical reaction to synthesize
piezoelectric thin films and powders. This method has a number of advantages,
such as low-temperature synthesis, and high purity and high quality of the product.
In order to promote hydrothermal reactions, we developed an ultrasonic assisted
hydrothermal method and confirmed that it produces dense and thick lead--zirconate--titanate
(PZT) films. In the hydrothermal method, a crystal growth process follows the
nucleation process. In this study, we verified that ultrasonic irradiation is
effective for the nucleation process, and there is an optimum irradiation period
to obtain thicker PZT films. With this optimization, a 9.2-$\mu$ m-thick PZT polycrystalline
film was obtained in a single deposition process. For this film, ultrasonic irradiation
was carried out from the beginning of the reaction for 18 h, followed by a 6 h
deposition without ultrasonic irradiation. These results indicate that the ultrasonic
irradiation mainly promotes the nucleation process.
author:
- first_name: Kanako
full_name: Ohta, Kanako
last_name: Ohta
- first_name: Gaku
full_name: Isobe, Gaku
last_name: Isobe
- first_name: Peter
full_name: Bornmann, Peter
last_name: Bornmann
- first_name: Tobias
full_name: Hemsel, Tobias
id: '210'
last_name: Hemsel
- first_name: Takeshi
full_name: Morita, Takeshi
last_name: Morita
citation:
ama: Ohta K, Isobe G, Bornmann P, Hemsel T, Morita T. Study on optimizing ultrasonic
irradiation period for thick polycrystalline PZT film by hydrothermal method.
Ultrasonics. 2013;53(4):837-841. doi:10.1016/j.ultras.2012.12.003
apa: Ohta, K., Isobe, G., Bornmann, P., Hemsel, T., & Morita, T. (2013). Study
on optimizing ultrasonic irradiation period for thick polycrystalline PZT film
by hydrothermal method. Ultrasonics, 53(4), 837–841. https://doi.org/10.1016/j.ultras.2012.12.003
bibtex: '@article{Ohta_Isobe_Bornmann_Hemsel_Morita_2013, title={Study on optimizing
ultrasonic irradiation period for thick polycrystalline PZT film by hydrothermal
method}, volume={53}, DOI={10.1016/j.ultras.2012.12.003},
number={4}, journal={Ultrasonics}, author={Ohta, Kanako and Isobe, Gaku and Bornmann,
Peter and Hemsel, Tobias and Morita, Takeshi}, year={2013}, pages={837–841} }'
chicago: 'Ohta, Kanako, Gaku Isobe, Peter Bornmann, Tobias Hemsel, and Takeshi Morita.
“Study on Optimizing Ultrasonic Irradiation Period for Thick Polycrystalline PZT
Film by Hydrothermal Method.” Ultrasonics 53, no. 4 (2013): 837–41. https://doi.org/10.1016/j.ultras.2012.12.003.'
ieee: K. Ohta, G. Isobe, P. Bornmann, T. Hemsel, and T. Morita, “Study on optimizing
ultrasonic irradiation period for thick polycrystalline PZT film by hydrothermal
method,” Ultrasonics, vol. 53, no. 4, pp. 837–841, 2013.
mla: Ohta, Kanako, et al. “Study on Optimizing Ultrasonic Irradiation Period for
Thick Polycrystalline PZT Film by Hydrothermal Method.” Ultrasonics, vol.
53, no. 4, 2013, pp. 837–41, doi:10.1016/j.ultras.2012.12.003.
short: K. Ohta, G. Isobe, P. Bornmann, T. Hemsel, T. Morita, Ultrasonics 53 (2013)
837–841.
date_created: 2019-05-20T12:03:07Z
date_updated: 2019-09-16T10:54:27Z
department:
- _id: '151'
doi: 10.1016/j.ultras.2012.12.003
intvolume: ' 53'
issue: '4'
keyword:
- Piezoelectric material
language:
- iso: eng
page: 837 - 841
publication: Ultrasonics
publication_identifier:
issn:
- 0041-624X
quality_controlled: '1'
status: public
title: Study on optimizing ultrasonic irradiation period for thick polycrystalline
PZT film by hydrothermal method
type: journal_article
user_id: '55222'
volume: 53
year: '2013'
...
---
_id: '517'
abstract:
- lang: eng
text: In the Semantic (Web) Services area, services are considered black boxes with
a semantic description of their interfaces as to allow for precise service selection
and configuration. The semantic description is usually grounded on domain-specific
concepts as modeled in ontologies. This accounts for types used in service signatures,
but also predicates occurring in preconditions and effects of services. Ontologies,
in particular those enhanced with rules, capture the knowledge of domain experts
on properties of and relations between domain concepts. In this paper, we present
a verification technique for service compositions which makes use of this domain
knowledge. We consider a service composition to be an assembly of services of
which we just know signatures, preconditions, and effects. We aim at proving that
a composition satisfies a (user-defined) requirement, specified in terms of guaranteed
preconditions and required postconditions. As an underlying verification engine
we use an SMT solver. To take advantage of the domain knowledge (and often, to
enable verification at all), the knowledge is fed into the solver in the form of
sorts, uninterpreted functions and in particular assertions as to enhance the
solver’s reasoning capabilities. Thereby, we allow for deductions within a domain
previously unknown to the solver. We exemplify our technique on a case study from
the area of water network optimization software.
author:
- first_name: Sven
full_name: Walther, Sven
last_name: Walther
- first_name: Heike
full_name: Wehrheim, Heike
id: '573'
last_name: Wehrheim
citation:
ama: 'Walther S, Wehrheim H. Knowledge-Based Verification of Service Compositions
- An SMT approach. In: Proceedings of the 18th IEEE International Conference
on Engineering of Complex Computer Systems (ICECCS). ; 2013:24-32. doi:10.1109/ICECCS.2013.14'
apa: Walther, S., & Wehrheim, H. (2013). Knowledge-Based Verification of Service
Compositions - An SMT approach. In Proceedings of the 18th IEEE International
Conference on Engineering of Complex Computer Systems (ICECCS) (pp. 24–32).
https://doi.org/10.1109/ICECCS.2013.14
bibtex: '@inproceedings{Walther_Wehrheim_2013, title={Knowledge-Based Verification
of Service Compositions - An SMT approach}, DOI={10.1109/ICECCS.2013.14},
booktitle={Proceedings of the 18th IEEE International Conference on Engineering
of Complex Computer Systems (ICECCS)}, author={Walther, Sven and Wehrheim, Heike},
year={2013}, pages={24–32} }'
chicago: Walther, Sven, and Heike Wehrheim. “Knowledge-Based Verification of Service
Compositions - An SMT Approach.” In Proceedings of the 18th IEEE International
Conference on Engineering of Complex Computer Systems (ICECCS), 24–32, 2013.
https://doi.org/10.1109/ICECCS.2013.14.
ieee: S. Walther and H. Wehrheim, “Knowledge-Based Verification of Service Compositions
- An SMT approach,” in Proceedings of the 18th IEEE International Conference
on Engineering of Complex Computer Systems (ICECCS), 2013, pp. 24–32.
mla: Walther, Sven, and Heike Wehrheim. “Knowledge-Based Verification of Service
Compositions - An SMT Approach.” Proceedings of the 18th IEEE International
Conference on Engineering of Complex Computer Systems (ICECCS), 2013, pp.
24–32, doi:10.1109/ICECCS.2013.14.
short: 'S. Walther, H. Wehrheim, in: Proceedings of the 18th IEEE International
Conference on Engineering of Complex Computer Systems (ICECCS), 2013, pp. 24–32.'
date_created: 2017-10-17T12:42:33Z
date_updated: 2022-01-06T07:01:41Z
ddc:
- '000'
department:
- _id: '77'
doi: 10.1109/ICECCS.2013.14
file:
- access_level: closed
content_type: application/pdf
creator: ups
date_created: 2018-11-02T13:26:08Z
date_updated: 2018-11-02T13:26:08Z
file_id: '5248'
file_name: 06601801.pdf
file_size: 217085
relation: main_file
file_date_updated: 2018-11-02T13:26:08Z
has_accepted_license: '1'
language:
- iso: eng
page: '24 - 32 '
project:
- _id: '1'
name: SFB 901
- _id: '11'
name: SFB 901 - Subprojekt B3
- _id: '3'
name: SFB 901 - Project Area B
publication: Proceedings of the 18th IEEE International Conference on Engineering
of Complex Computer Systems (ICECCS)
status: public
title: Knowledge-Based Verification of Service Compositions - An SMT approach
type: conference
user_id: '477'
year: '2013'
...