---
_id: '17651'
abstract:
- lang: eng
text: 'Consider mitigating the effects of denial of service or of malicious traffic
in networks by deleting edges. Edge deletion reduces the DoS or the number of
the malicious flows, but it also inadvertently removes some of the desired flows.
To model this important problem, we formulate two problems: (1) remove all the
undesirable flows while minimizing the damage to the desirable ones and (2) balance
removing the undesirable flows and not removing too many of the desirable flows.
We prove these problems are equivalent to important theoretical problems, thereby
being important not only practically but also theoretically, and very hard to
approximate in a general network. We employ reductions to nonetheless approximate
the problem and also provide a greedy approximation. When the network is a tree,
the problems are still MAX SNP-hard, but we provide a greedy-based 2l-approximation
algorithm, where l is the longest desirable flow. We also provide an algorithm,
approximating the first and the second problem within {\$}{\$}2 {\backslash}sqrt{\{}
2{\backslash}left| E {\backslash}right| {\}}{\$}{\$}and {\$}{\$}2 {\backslash}sqrt{\{}2
({\backslash}left| E {\backslash}right| + {\backslash}left| {\backslash}text {\{}undesirable
flows{\}} {\backslash}right| ){\}}{\$}{\$}, respectively, where E is the set of
the edges of the network. We also provide a fixed-parameter tractable (FPT) algorithm.
Finally, if the tree has a root such that every flow in the tree flows on the
path from the root to a leaf, we solve the problem exactly using dynamic programming.'
author:
- first_name: Gleb
full_name: Polevoy, Gleb
id: '83983'
last_name: Polevoy
- first_name: Stojan
full_name: Trajanovski, Stojan
last_name: Trajanovski
- first_name: Paola
full_name: Grosso, Paola
last_name: Grosso
- first_name: Cees
full_name: de Laat, Cees
last_name: de Laat
citation:
ama: 'Polevoy G, Trajanovski S, Grosso P, de Laat C. Removing Undesirable Flows
by Edge Deletion. In: Kim D, Uma RN, Zelikovsky A, eds. Combinatorial Optimization
and Applications. Cham: Springer International Publishing; 2018:217-232.'
apa: 'Polevoy, G., Trajanovski, S., Grosso, P., & de Laat, C. (2018). Removing
Undesirable Flows by Edge Deletion. In D. Kim, R. N. Uma, & A. Zelikovsky
(Eds.), Combinatorial Optimization and Applications (pp. 217–232). Cham:
Springer International Publishing.'
bibtex: '@inproceedings{Polevoy_Trajanovski_Grosso_de Laat_2018, place={Cham}, title={Removing
Undesirable Flows by Edge Deletion}, booktitle={Combinatorial Optimization and
Applications}, publisher={Springer International Publishing}, author={Polevoy,
Gleb and Trajanovski, Stojan and Grosso, Paola and de Laat, Cees}, editor={Kim,
Donghyun and Uma, R. N. and Zelikovsky, AlexanderEditors}, year={2018}, pages={217–232}
}'
chicago: 'Polevoy, Gleb, Stojan Trajanovski, Paola Grosso, and Cees de Laat. “Removing
Undesirable Flows by Edge Deletion.” In Combinatorial Optimization and Applications,
edited by Donghyun Kim, R. N. Uma, and Alexander Zelikovsky, 217–32. Cham: Springer
International Publishing, 2018.'
ieee: G. Polevoy, S. Trajanovski, P. Grosso, and C. de Laat, “Removing Undesirable
Flows by Edge Deletion,” in Combinatorial Optimization and Applications,
2018, pp. 217–232.
mla: Polevoy, Gleb, et al. “Removing Undesirable Flows by Edge Deletion.” Combinatorial
Optimization and Applications, edited by Donghyun Kim et al., Springer International
Publishing, 2018, pp. 217–32.
short: 'G. Polevoy, S. Trajanovski, P. Grosso, C. de Laat, in: D. Kim, R.N. Uma,
A. Zelikovsky (Eds.), Combinatorial Optimization and Applications, Springer International
Publishing, Cham, 2018, pp. 217–232.'
date_created: 2020-08-06T15:19:36Z
date_updated: 2022-01-06T06:53:16Z
department:
- _id: '63'
- _id: '541'
editor:
- first_name: Donghyun
full_name: Kim, Donghyun
last_name: Kim
- first_name: R. N.
full_name: Uma, R. N.
last_name: Uma
- first_name: Alexander
full_name: Zelikovsky, Alexander
last_name: Zelikovsky
extern: '1'
keyword:
- flow
- Red-Blue Set Cover
- Positive-Negative Partial Set Cover
- approximation
- tree
- MAX SNP-hard
- root
- leaf
- dynamic programming
- FPT
language:
- iso: eng
page: 217-232
place: Cham
publication: Combinatorial Optimization and Applications
publication_identifier:
isbn:
- 978-3-030-04651-4
publisher: Springer International Publishing
status: public
title: Removing Undesirable Flows by Edge Deletion
type: conference
user_id: '83983'
year: '2018'
...
---
_id: '23626'
abstract:
- lang: eng
text: Interfaces of room temperature ionic liquids (RTILs) are important
for both applications and basic science and are therefore intensely studied. However,
the evolution of their interface structure with the cation’s alkyl chain length
n from Coulomb to van der Waals interaction domination has not yet been studied
for even a single broad homologous RTIL series. We present here such a study of
the liquid–air interface for n=2to 22,
using angstrom-resolution X-ray methods. For n<6,
a typical “simple liquid” monotonic surface-normal electron density profile ρe(z)
is obtained, like those of water and organic solvents. For n>6,
increasingly more pronounced nanoscale self-segregation of the molecules’ charged
moieties and apolar chains yields surface layering with alternating regions of
headgroups and chains. The layering decays into the bulk over a few, to a few
tens, of nanometers. The layering periods and decay lengths, their linear n dependence,
and slopes are discussed within two models, one with partial-chain interdigitation
and the other with liquid-like chains. No surface-parallel long-range order is
found within the surface layer. For n=22,
a different surface phase is observed above melting. Our results also impact general
liquid-phase issues like supramolecular self-aggregation and bulk–surface structure
relations.
author:
- first_name: Julia
full_name: Haddad, Julia
last_name: Haddad
- first_name: Diego
full_name: Pontoni, Diego
last_name: Pontoni
- first_name: Bridget M.
full_name: Murphy, Bridget M.
last_name: Murphy
- first_name: Sven
full_name: Festersen, Sven
last_name: Festersen
- first_name: Benjamin
full_name: Runge, Benjamin
last_name: Runge
- first_name: Olaf M.
full_name: Magnussen, Olaf M.
last_name: Magnussen
- first_name: Hans-Georg
full_name: Steinrück, Hans-Georg
id: '84268'
last_name: Steinrück
orcid: 0000-0001-6373-0877
- first_name: Harald
full_name: Reichert, Harald
last_name: Reichert
- first_name: Benjamin M.
full_name: Ocko, Benjamin M.
last_name: Ocko
- first_name: Moshe
full_name: Deutsch, Moshe
last_name: Deutsch
citation:
ama: Haddad J, Pontoni D, Murphy BM, et al. Surface structure evolution in a homologous
series of ionic liquids. Proceedings of the National Academy of Sciences.
2018;115:E1100-E1107. doi:10.1073/pnas.1716418115
apa: Haddad, J., Pontoni, D., Murphy, B. M., Festersen, S., Runge, B., Magnussen,
O. M., Steinrück, H.-G., Reichert, H., Ocko, B. M., & Deutsch, M. (2018).
Surface structure evolution in a homologous series of ionic liquids. Proceedings
of the National Academy of Sciences, 115, E1100–E1107. https://doi.org/10.1073/pnas.1716418115
bibtex: '@article{Haddad_Pontoni_Murphy_Festersen_Runge_Magnussen_Steinrück_Reichert_Ocko_Deutsch_2018,
title={Surface structure evolution in a homologous series of ionic liquids}, volume={115},
DOI={10.1073/pnas.1716418115},
journal={Proceedings of the National Academy of Sciences}, author={Haddad, Julia
and Pontoni, Diego and Murphy, Bridget M. and Festersen, Sven and Runge, Benjamin
and Magnussen, Olaf M. and Steinrück, Hans-Georg and Reichert, Harald and Ocko,
Benjamin M. and Deutsch, Moshe}, year={2018}, pages={E1100–E1107} }'
chicago: 'Haddad, Julia, Diego Pontoni, Bridget M. Murphy, Sven Festersen, Benjamin
Runge, Olaf M. Magnussen, Hans-Georg Steinrück, Harald Reichert, Benjamin M. Ocko,
and Moshe Deutsch. “Surface Structure Evolution in a Homologous Series of Ionic
Liquids.” Proceedings of the National Academy of Sciences 115 (2018): E1100–1107.
https://doi.org/10.1073/pnas.1716418115.'
ieee: 'J. Haddad et al., “Surface structure evolution in a homologous series
of ionic liquids,” Proceedings of the National Academy of Sciences, vol.
115, pp. E1100–E1107, 2018, doi: 10.1073/pnas.1716418115.'
mla: Haddad, Julia, et al. “Surface Structure Evolution in a Homologous Series of
Ionic Liquids.” Proceedings of the National Academy of Sciences, vol. 115,
2018, pp. E1100–07, doi:10.1073/pnas.1716418115.
short: J. Haddad, D. Pontoni, B.M. Murphy, S. Festersen, B. Runge, O.M. Magnussen,
H.-G. Steinrück, H. Reichert, B.M. Ocko, M. Deutsch, Proceedings of the National
Academy of Sciences 115 (2018) E1100–E1107.
date_created: 2021-09-01T09:47:27Z
date_updated: 2022-01-06T06:55:57Z
department:
- _id: '633'
doi: 10.1073/pnas.1716418115
intvolume: ' 115'
language:
- iso: eng
page: E1100-E1107
publication: Proceedings of the National Academy of Sciences
publication_identifier:
issn:
- 0027-8424
- 1091-6490
publication_status: published
status: public
title: Surface structure evolution in a homologous series of ionic liquids
type: journal_article
user_id: '84268'
volume: 115
year: '2018'
...
---
_id: '22117'
author:
- first_name: B.
full_name: Schramm, B.
last_name: Schramm
- first_name: L.
full_name: Risse, L.
last_name: Risse
- first_name: J.P.
full_name: Brüggemann, J.P.
last_name: Brüggemann
- first_name: H.A.
full_name: Richard, H.A.
last_name: Richard
- first_name: G.
full_name: Kullmer, G.
last_name: Kullmer
citation:
ama: Schramm B, Risse L, Brüggemann JP, Richard HA, Kullmer G. Additive manufacturing
for medical applications. Journal of 3D Printing in medicine. 2018;2.
apa: Schramm, B., Risse, L., Brüggemann, J. P., Richard, H. A., & Kullmer, G.
(2018). Additive manufacturing for medical applications. Journal of 3D Printing
in Medicine, 2.
bibtex: '@article{Schramm_Risse_Brüggemann_Richard_Kullmer_2018, title={Additive
manufacturing for medical applications}, volume={2}, journal={Journal of 3D Printing
in medicine}, author={Schramm, B. and Risse, L. and Brüggemann, J.P. and Richard,
H.A. and Kullmer, G.}, year={2018} }'
chicago: Schramm, B., L. Risse, J.P. Brüggemann, H.A. Richard, and G. Kullmer. “Additive
Manufacturing for Medical Applications.” Journal of 3D Printing in Medicine
2 (2018).
ieee: B. Schramm, L. Risse, J. P. Brüggemann, H. A. Richard, and G. Kullmer, “Additive
manufacturing for medical applications,” Journal of 3D Printing in medicine,
vol. 2, 2018.
mla: Schramm, B., et al. “Additive Manufacturing for Medical Applications.” Journal
of 3D Printing in Medicine, vol. 2, 2018.
short: B. Schramm, L. Risse, J.P. Brüggemann, H.A. Richard, G. Kullmer, Journal
of 3D Printing in Medicine 2 (2018).
date_created: 2021-05-11T07:48:03Z
date_updated: 2022-01-06T06:55:26Z
department:
- _id: '143'
- _id: '219'
intvolume: ' 2'
publication: Journal of 3D Printing in medicine
status: public
title: Additive manufacturing for medical applications
type: journal_article
user_id: '60486'
volume: 2
year: '2018'
...
---
_id: '22145'
abstract:
- lang: eng
text: results clearly demonstrate the great potential of additive
author:
- first_name: T.D.
full_name: Joy, T.D.
last_name: Joy
- first_name: J.P.
full_name: Brüggemann, J.P.
last_name: Brüggemann
- first_name: G.
full_name: Kullmer, G.
last_name: Kullmer
citation:
ama: 'Joy TD, Brüggemann JP, Kullmer G. Crack Growth Simulation with Adapcrack3D
in 3D Structures under the influence of Temperature. In: Procedia Structural
Integrity. ; 2018:in press.'
apa: Joy, T. D., Brüggemann, J. P., & Kullmer, G. (2018). Crack Growth Simulation
with Adapcrack3D in 3D Structures under the influence of Temperature. In Procedia
Structural Integrity (p. in press).
bibtex: '@inproceedings{Joy_Brüggemann_Kullmer_2018, title={Crack Growth Simulation
with Adapcrack3D in 3D Structures under the influence of Temperature}, booktitle={Procedia
Structural Integrity}, author={Joy, T.D. and Brüggemann, J.P. and Kullmer, G.},
year={2018}, pages={in press} }'
chicago: Joy, T.D., J.P. Brüggemann, and G. Kullmer. “Crack Growth Simulation with
Adapcrack3D in 3D Structures under the Influence of Temperature.” In Procedia
Structural Integrity, in press, 2018.
ieee: T. D. Joy, J. P. Brüggemann, and G. Kullmer, “Crack Growth Simulation with
Adapcrack3D in 3D Structures under the influence of Temperature,” in Procedia
Structural Integrity, 2018, p. in press.
mla: Joy, T. D., et al. “Crack Growth Simulation with Adapcrack3D in 3D Structures
under the Influence of Temperature.” Procedia Structural Integrity, 2018,
p. in press.
short: 'T.D. Joy, J.P. Brüggemann, G. Kullmer, in: Procedia Structural Integrity,
2018, p. in press.'
date_created: 2021-05-11T07:48:36Z
date_updated: 2022-01-06T06:55:27Z
department:
- _id: '143'
- _id: '219'
page: in press
publication: Procedia Structural Integrity
status: public
title: Crack Growth Simulation with Adapcrack3D in 3D Structures under the influence
of Temperature
type: conference
user_id: '60486'
year: '2018'
...
---
_id: '22147'
author:
- first_name: J.P.
full_name: Brüggemann, J.P.
last_name: Brüggemann
- first_name: L.
full_name: Risse, L.
last_name: Risse
- first_name: G.
full_name: Kullmer, G.
last_name: Kullmer
- first_name: B.
full_name: Schramm, B.
last_name: Schramm
- first_name: H.A.
full_name: Richard, H.A.
last_name: Richard
citation:
ama: 'Brüggemann JP, Risse L, Kullmer G, Schramm B, Richard HA. Optimization of
the fracture mechanical properties of additively manufactured EN AW-7075. In:
Procedia Structural Integrity. ; 2018:in press. doi:10.1016/j.prostr.2018.12.052'
apa: Brüggemann, J. P., Risse, L., Kullmer, G., Schramm, B., & Richard, H. A.
(2018). Optimization of the fracture mechanical properties of additively manufactured
EN AW-7075. In Procedia Structural Integrity (p. in press). https://doi.org/10.1016/j.prostr.2018.12.052
bibtex: '@inproceedings{Brüggemann_Risse_Kullmer_Schramm_Richard_2018, title={Optimization
of the fracture mechanical properties of additively manufactured EN AW-7075},
DOI={10.1016/j.prostr.2018.12.052},
booktitle={Procedia Structural Integrity}, author={Brüggemann, J.P. and Risse,
L. and Kullmer, G. and Schramm, B. and Richard, H.A.}, year={2018}, pages={in
press} }'
chicago: Brüggemann, J.P., L. Risse, G. Kullmer, B. Schramm, and H.A. Richard. “Optimization
of the Fracture Mechanical Properties of Additively Manufactured EN AW-7075.”
In Procedia Structural Integrity, in press, 2018. https://doi.org/10.1016/j.prostr.2018.12.052.
ieee: J. P. Brüggemann, L. Risse, G. Kullmer, B. Schramm, and H. A. Richard, “Optimization
of the fracture mechanical properties of additively manufactured EN AW-7075,”
in Procedia Structural Integrity, 2018, p. in press.
mla: Brüggemann, J. P., et al. “Optimization of the Fracture Mechanical Properties
of Additively Manufactured EN AW-7075.” Procedia Structural Integrity,
2018, p. in press, doi:10.1016/j.prostr.2018.12.052.
short: 'J.P. Brüggemann, L. Risse, G. Kullmer, B. Schramm, H.A. Richard, in: Procedia
Structural Integrity, 2018, p. in press.'
date_created: 2021-05-11T07:48:38Z
date_updated: 2022-01-06T06:55:27Z
department:
- _id: '143'
- _id: '219'
doi: 10.1016/j.prostr.2018.12.052
page: in press
publication: Procedia Structural Integrity
status: public
title: Optimization of the fracture mechanical properties of additively manufactured
EN AW-7075
type: conference
user_id: '60486'
year: '2018'
...
---
_id: '22759'
author:
- first_name: Alexander
full_name: Albers, Alexander
last_name: Albers
- first_name: Ruslan
full_name: Bernijazov, Ruslan
last_name: Bernijazov
- first_name: Lydia
full_name: Kaiser, Lydia
last_name: Kaiser
- first_name: Roman
full_name: Dumitrescu, Roman
id: '16190'
last_name: Dumitrescu
citation:
ama: 'Albers A, Bernijazov R, Kaiser L, Dumitrescu R. Internet of Things Canvas
for Ideation in Model-Based Product Generation Planning. In: IEEE - 13th System
of Systems Engineering Conference, 19. - 22. Jun. 2018. ; 2018.'
apa: Albers, A., Bernijazov, R., Kaiser, L., & Dumitrescu, R. (2018). Internet
of Things Canvas for Ideation in Model-Based Product Generation Planning. In IEEE
- 13th System of Systems Engineering Conference, 19. - 22. Jun. 2018.
bibtex: '@inproceedings{Albers_Bernijazov_Kaiser_Dumitrescu_2018, title={Internet
of Things Canvas for Ideation in Model-Based Product Generation Planning}, booktitle={IEEE
- 13th System of Systems Engineering Conference, 19. - 22. Jun. 2018}, author={Albers,
Alexander and Bernijazov, Ruslan and Kaiser, Lydia and Dumitrescu, Roman}, year={2018}
}'
chicago: Albers, Alexander, Ruslan Bernijazov, Lydia Kaiser, and Roman Dumitrescu.
“Internet of Things Canvas for Ideation in Model-Based Product Generation Planning.”
In IEEE - 13th System of Systems Engineering Conference, 19. - 22. Jun. 2018,
2018.
ieee: A. Albers, R. Bernijazov, L. Kaiser, and R. Dumitrescu, “Internet of Things
Canvas for Ideation in Model-Based Product Generation Planning,” in IEEE -
13th System of Systems Engineering Conference, 19. - 22. Jun. 2018, 2018.
mla: Albers, Alexander, et al. “Internet of Things Canvas for Ideation in Model-Based
Product Generation Planning.” IEEE - 13th System of Systems Engineering Conference,
19. - 22. Jun. 2018, 2018.
short: 'A. Albers, R. Bernijazov, L. Kaiser, R. Dumitrescu, in: IEEE - 13th System
of Systems Engineering Conference, 19. - 22. Jun. 2018, 2018.'
conference:
end_date: 2018-06-22
name: IEEE - 13th System of Systems Engineering Conference
start_date: 2018-06-19
date_created: 2021-07-15T12:29:37Z
date_updated: 2022-01-06T06:55:39Z
department:
- _id: '563'
language:
- iso: eng
publication: IEEE - 13th System of Systems Engineering Conference, 19. - 22. Jun.
2018
status: public
title: Internet of Things Canvas for Ideation in Model-Based Product Generation Planning
type: conference
user_id: '21240'
year: '2018'
...
---
_id: '22786'
author:
- first_name: Robert
full_name: Joppen, Robert
last_name: Joppen
- first_name: Sebastian
full_name: von Enzberg, Sebastian
last_name: von Enzberg
- first_name: Arno
full_name: Kühn, Arno
last_name: Kühn
- first_name: Roman
full_name: Dumitrescu, Roman
id: '16190'
last_name: Dumitrescu
citation:
ama: 'Joppen R, von Enzberg S, Kühn A, Dumitrescu R. A practical Framework for the
Optimization of Production Management Processes. In: The 16th Global Conference
on Sustainable Manufacturing . ; 2018.'
apa: Joppen, R., von Enzberg, S., Kühn, A., & Dumitrescu, R. (2018). A practical
Framework for the Optimization of Production Management Processes. In The 16th
Global Conference on Sustainable Manufacturing .
bibtex: '@inproceedings{Joppen_von Enzberg_Kühn_Dumitrescu_2018, title={A practical
Framework for the Optimization of Production Management Processes}, booktitle={The
16th Global Conference on Sustainable Manufacturing }, author={Joppen, Robert
and von Enzberg, Sebastian and Kühn, Arno and Dumitrescu, Roman}, year={2018}
}'
chicago: Joppen, Robert, Sebastian von Enzberg, Arno Kühn, and Roman Dumitrescu.
“A Practical Framework for the Optimization of Production Management Processes.”
In The 16th Global Conference on Sustainable Manufacturing , 2018.
ieee: R. Joppen, S. von Enzberg, A. Kühn, and R. Dumitrescu, “A practical Framework
for the Optimization of Production Management Processes,” in The 16th Global
Conference on Sustainable Manufacturing , 2018.
mla: Joppen, Robert, et al. “A Practical Framework for the Optimization of Production
Management Processes.” The 16th Global Conference on Sustainable Manufacturing
, 2018.
short: 'R. Joppen, S. von Enzberg, A. Kühn, R. Dumitrescu, in: The 16th Global Conference
on Sustainable Manufacturing , 2018.'
date_created: 2021-07-22T08:28:15Z
date_updated: 2022-01-06T06:55:40Z
department:
- _id: '563'
language:
- iso: eng
publication: 'The 16th Global Conference on Sustainable Manufacturing '
status: public
title: A practical Framework for the Optimization of Production Management Processes
type: conference
user_id: '21240'
year: '2018'
...
---
_id: '5675'
abstract:
- lang: eng
text: When responding to natural disasters, professional relief units are often
supported by many volunteers which are not affiliated to humanitarian organizations.
The effective coordination of these volunteers is crucial to leverage their capabilities
and to avoid conflicts with professional relief units. In this paper, we empirically
identify key requirements that professional relief units pose on this coordination.
Based on these requirements, we suggest a decision model. We computationally solve
a real-world instance of the model and empirically validate the computed solution
in interviews with practitioners. Our results show that the suggested model allows
for solving volunteer coordination tasks of realistic size near-optimally within
short time, with the determined solution being well accepted by practitioners.
We also describe in this article how the suggested decision support model is integrated
in the volunteer coordination system which we develop in joint cooperation with
a disaster management authority and a software development company.
author:
- first_name: Gerhard
full_name: Rauchecker, Gerhard
last_name: Rauchecker
- first_name: Guido
full_name: Schryen, Guido
id: '72850'
last_name: Schryen
citation:
ama: 'Rauchecker G, Schryen G. Decision Support for the Optimal Coordination of
Spontaneous Volunteers in Disaster Relief. In: Proceedings of the 15th International
Conference on Information Systems for Crisis Response and Management. ; 2018.'
apa: Rauchecker, G., & Schryen, G. (2018). Decision Support for the Optimal
Coordination of Spontaneous Volunteers in Disaster Relief. In Proceedings of
the 15th International Conference on Information Systems for Crisis Response and
Management. Rochester, NY, USA.
bibtex: '@inproceedings{Rauchecker_Schryen_2018, title={Decision Support for the
Optimal Coordination of Spontaneous Volunteers in Disaster Relief}, booktitle={Proceedings
of the 15th International Conference on Information Systems for Crisis Response
and Management}, author={Rauchecker, Gerhard and Schryen, Guido}, year={2018}
}'
chicago: Rauchecker, Gerhard, and Guido Schryen. “Decision Support for the Optimal
Coordination of Spontaneous Volunteers in Disaster Relief.” In Proceedings
of the 15th International Conference on Information Systems for Crisis Response
and Management, 2018.
ieee: G. Rauchecker and G. Schryen, “Decision Support for the Optimal Coordination
of Spontaneous Volunteers in Disaster Relief,” in Proceedings of the 15th International
Conference on Information Systems for Crisis Response and Management, Rochester,
NY, USA, 2018.
mla: Rauchecker, Gerhard, and Guido Schryen. “Decision Support for the Optimal Coordination
of Spontaneous Volunteers in Disaster Relief.” Proceedings of the 15th International
Conference on Information Systems for Crisis Response and Management, 2018.
short: 'G. Rauchecker, G. Schryen, in: Proceedings of the 15th International Conference
on Information Systems for Crisis Response and Management, 2018.'
conference:
location: Rochester, NY, USA
name: 15th International Conference on Information Systems for Crisis Response and
Management
date_created: 2018-11-14T15:35:54Z
date_updated: 2022-01-06T07:02:28Z
ddc:
- '000'
department:
- _id: '277'
extern: '1'
file:
- access_level: open_access
content_type: application/pdf
creator: hsiemes
date_created: 2018-12-07T11:25:06Z
date_updated: 2018-12-13T15:05:44Z
file_id: '6020'
file_name: 2018_ISCRAM_Conference_Proceedings - Publication Version.pdf
file_size: 488472
relation: main_file
file_date_updated: 2018-12-13T15:05:44Z
has_accepted_license: '1'
keyword:
- Coordination of spontaneous volunteers
- volunteer coordination system
- decision support
- scheduling optimization model
- linear programming
language:
- iso: eng
oa: '1'
publication: Proceedings of the 15th International Conference on Information Systems
for Crisis Response and Management
status: public
title: Decision Support for the Optimal Coordination of Spontaneous Volunteers in
Disaster Relief
type: conference
user_id: '61579'
year: '2018'
...
---
_id: '5822'
author:
- first_name: Daniel
full_name: Gaspers, Daniel
last_name: Gaspers
- first_name: Christoph
full_name: Knorr, Christoph
last_name: Knorr
- first_name: Tobias
full_name: Nickchen, Tobias
id: '27340'
last_name: Nickchen
orcid: 0000-0001-8958-9330
- first_name: Daniel
full_name: Nickchen, Daniel
last_name: Nickchen
- first_name: Barbel
full_name: Mertsching, Barbel
last_name: Mertsching
- first_name: Mahmoud A.
full_name: Mohamed, Mahmoud A.
last_name: Mohamed
citation:
ama: 'Gaspers D, Knorr C, Nickchen T, Nickchen D, Mertsching B, Mohamed MA. Real-time
Graph-Based 3D Reconstruction of Sparse Feature Environments for Mobile Robot
Applications. In: 2018 IEEE International Symposium on Safety, Security, and
Rescue Robotics (SSRR). IEEE; 2018. doi:10.1109/ssrr.2018.8468658'
apa: Gaspers, D., Knorr, C., Nickchen, T., Nickchen, D., Mertsching, B., & Mohamed,
M. A. (2018). Real-time Graph-Based 3D Reconstruction of Sparse Feature Environments
for Mobile Robot Applications. In 2018 IEEE International Symposium on Safety,
Security, and Rescue Robotics (SSRR). IEEE. https://doi.org/10.1109/ssrr.2018.8468658
bibtex: '@inproceedings{Gaspers_Knorr_Nickchen_Nickchen_Mertsching_Mohamed_2018,
title={Real-time Graph-Based 3D Reconstruction of Sparse Feature Environments
for Mobile Robot Applications}, DOI={10.1109/ssrr.2018.8468658},
booktitle={2018 IEEE International Symposium on Safety, Security, and Rescue Robotics
(SSRR)}, publisher={IEEE}, author={Gaspers, Daniel and Knorr, Christoph and Nickchen,
Tobias and Nickchen, Daniel and Mertsching, Barbel and Mohamed, Mahmoud A.}, year={2018}
}'
chicago: Gaspers, Daniel, Christoph Knorr, Tobias Nickchen, Daniel Nickchen, Barbel
Mertsching, and Mahmoud A. Mohamed. “Real-Time Graph-Based 3D Reconstruction of
Sparse Feature Environments for Mobile Robot Applications.” In 2018 IEEE International
Symposium on Safety, Security, and Rescue Robotics (SSRR). IEEE, 2018. https://doi.org/10.1109/ssrr.2018.8468658.
ieee: D. Gaspers, C. Knorr, T. Nickchen, D. Nickchen, B. Mertsching, and M. A. Mohamed,
“Real-time Graph-Based 3D Reconstruction of Sparse Feature Environments for Mobile
Robot Applications,” in 2018 IEEE International Symposium on Safety, Security,
and Rescue Robotics (SSRR), 2018.
mla: Gaspers, Daniel, et al. “Real-Time Graph-Based 3D Reconstruction of Sparse
Feature Environments for Mobile Robot Applications.” 2018 IEEE International
Symposium on Safety, Security, and Rescue Robotics (SSRR), IEEE, 2018, doi:10.1109/ssrr.2018.8468658.
short: 'D. Gaspers, C. Knorr, T. Nickchen, D. Nickchen, B. Mertsching, M.A. Mohamed,
in: 2018 IEEE International Symposium on Safety, Security, and Rescue Robotics
(SSRR), IEEE, 2018.'
date_created: 2018-11-26T08:49:44Z
date_updated: 2022-01-06T07:02:43Z
department:
- _id: '66'
- _id: '534'
doi: 10.1109/ssrr.2018.8468658
language:
- iso: eng
publication: 2018 IEEE International Symposium on Safety, Security, and Rescue Robotics
(SSRR)
publication_identifier:
isbn:
- '9781538655726'
publication_status: published
publisher: IEEE
status: public
title: Real-time Graph-Based 3D Reconstruction of Sparse Feature Environments for
Mobile Robot Applications
type: conference
user_id: '27340'
year: '2018'
...
---
_id: '8750'
abstract:
- lang: eng
text: In this article we propose a descent method for equality and inequality constrained
multiobjective optimization problems (MOPs) which generalizes the steepest descent
method for unconstrained MOPs by Fliege and Svaiter to constrained problems by
using two active set strategies. Under some regularity assumptions on the problem,
we show that accumulation points of our descent method satisfy a necessary condition
for local Pareto optimality. Finally, we show the typical behavior of our method
in a numerical example.
author:
- first_name: Bennet
full_name: Gebken, Bennet
id: '32643'
last_name: Gebken
- first_name: Sebastian
full_name: Peitz, Sebastian
id: '47427'
last_name: Peitz
orcid: https://orcid.org/0000-0002-3389-793X
- first_name: Michael
full_name: Dellnitz, Michael
last_name: Dellnitz
citation:
ama: 'Gebken B, Peitz S, Dellnitz M. A Descent Method for Equality and Inequality
Constrained Multiobjective Optimization Problems. In: Numerical and Evolutionary
Optimization – NEO 2017. Cham; 2018. doi:10.1007/978-3-319-96104-0_2'
apa: Gebken, B., Peitz, S., & Dellnitz, M. (2018). A Descent Method for Equality
and Inequality Constrained Multiobjective Optimization Problems. In Numerical
and Evolutionary Optimization – NEO 2017. Cham. https://doi.org/10.1007/978-3-319-96104-0_2
bibtex: '@inproceedings{Gebken_Peitz_Dellnitz_2018, place={Cham}, title={A Descent
Method for Equality and Inequality Constrained Multiobjective Optimization Problems},
DOI={10.1007/978-3-319-96104-0_2},
booktitle={Numerical and Evolutionary Optimization – NEO 2017}, author={Gebken,
Bennet and Peitz, Sebastian and Dellnitz, Michael}, year={2018} }'
chicago: Gebken, Bennet, Sebastian Peitz, and Michael Dellnitz. “A Descent Method
for Equality and Inequality Constrained Multiobjective Optimization Problems.”
In Numerical and Evolutionary Optimization – NEO 2017. Cham, 2018. https://doi.org/10.1007/978-3-319-96104-0_2.
ieee: B. Gebken, S. Peitz, and M. Dellnitz, “A Descent Method for Equality and Inequality
Constrained Multiobjective Optimization Problems,” in Numerical and Evolutionary
Optimization – NEO 2017, 2018.
mla: Gebken, Bennet, et al. “A Descent Method for Equality and Inequality Constrained
Multiobjective Optimization Problems.” Numerical and Evolutionary Optimization
– NEO 2017, 2018, doi:10.1007/978-3-319-96104-0_2.
short: 'B. Gebken, S. Peitz, M. Dellnitz, in: Numerical and Evolutionary Optimization
– NEO 2017, Cham, 2018.'
conference:
name: 'NEO 2017: Numerical and Evolutionary Optimization'
date_created: 2019-03-29T13:26:47Z
date_updated: 2022-01-06T07:04:00Z
department:
- _id: '101'
doi: 10.1007/978-3-319-96104-0_2
language:
- iso: eng
place: Cham
publication: Numerical and Evolutionary Optimization – NEO 2017
publication_identifier:
isbn:
- '9783319961033'
- '9783319961040'
issn:
- 1860-949X
- 1860-9503
publication_status: published
status: public
title: A Descent Method for Equality and Inequality Constrained Multiobjective Optimization
Problems
type: conference
user_id: '47427'
year: '2018'
...
---
_id: '8751'
abstract:
- lang: eng
text: Multiobjective optimization plays an increasingly important role in modern
applications, where several criteria are often of equal importance. The task in
multiobjective optimization and multiobjective optimal control is therefore to
compute the set of optimal compromises (the Pareto set) between the conflicting
objectives. The advances in algorithms and the increasing interest in Pareto-optimal
solutions have led to a wide range of new applications related to optimal and
feedback control, which results in new challenges such as expensive models or
real-time applicability. Since the Pareto set generally consists of an infinite
number of solutions, the computational effort can quickly become challenging,
which is particularly problematic when the objectives are costly to evaluate or
when a solution has to be presented very quickly. This article gives an overview
of recent developments in accelerating multiobjective optimal control for complex
problems where either PDE constraints are present or where a feedback behavior
has to be achieved. In the first case, surrogate models yield significant speed-ups.
Besides classical meta-modeling techniques for multiobjective optimization, a
promising alternative for control problems is to introduce a surrogate model for
the system dynamics. In the case of real-time requirements, various promising
model predictive control approaches have been proposed, using either fast online
solvers or offline-online decomposition. We also briefly comment on dimension
reduction in many-objective optimization problems as another technique for reducing
the numerical effort.
article_type: review
author:
- first_name: Sebastian
full_name: Peitz, Sebastian
id: '47427'
last_name: Peitz
orcid: https://orcid.org/0000-0002-3389-793X
- first_name: Michael
full_name: Dellnitz, Michael
last_name: Dellnitz
citation:
ama: Peitz S, Dellnitz M. A Survey of Recent Trends in Multiobjective Optimal Control—Surrogate
Models, Feedback Control and Objective Reduction. Mathematical and Computational
Applications. 2018;23(2). doi:10.3390/mca23020030
apa: Peitz, S., & Dellnitz, M. (2018). A Survey of Recent Trends in Multiobjective
Optimal Control—Surrogate Models, Feedback Control and Objective Reduction. Mathematical
and Computational Applications, 23(2). https://doi.org/10.3390/mca23020030
bibtex: '@article{Peitz_Dellnitz_2018, title={A Survey of Recent Trends in Multiobjective
Optimal Control—Surrogate Models, Feedback Control and Objective Reduction}, volume={23},
DOI={10.3390/mca23020030}, number={2},
journal={Mathematical and Computational Applications}, author={Peitz, Sebastian
and Dellnitz, Michael}, year={2018} }'
chicago: Peitz, Sebastian, and Michael Dellnitz. “A Survey of Recent Trends in Multiobjective
Optimal Control—Surrogate Models, Feedback Control and Objective Reduction.” Mathematical
and Computational Applications 23, no. 2 (2018). https://doi.org/10.3390/mca23020030.
ieee: S. Peitz and M. Dellnitz, “A Survey of Recent Trends in Multiobjective Optimal
Control—Surrogate Models, Feedback Control and Objective Reduction,” Mathematical
and Computational Applications, vol. 23, no. 2, 2018.
mla: Peitz, Sebastian, and Michael Dellnitz. “A Survey of Recent Trends in Multiobjective
Optimal Control—Surrogate Models, Feedback Control and Objective Reduction.” Mathematical
and Computational Applications, vol. 23, no. 2, 2018, doi:10.3390/mca23020030.
short: S. Peitz, M. Dellnitz, Mathematical and Computational Applications 23 (2018).
date_created: 2019-03-29T13:27:51Z
date_updated: 2022-01-06T07:04:00Z
department:
- _id: '101'
doi: 10.3390/mca23020030
intvolume: ' 23'
issue: '2'
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.mdpi.com/2297-8747/23/2/30/pdf
oa: '1'
publication: Mathematical and Computational Applications
publication_identifier:
issn:
- 2297-8747
publication_status: published
status: public
title: A Survey of Recent Trends in Multiobjective Optimal Control—Surrogate Models,
Feedback Control and Objective Reduction
type: journal_article
user_id: '47427'
volume: 23
year: '2018'
...
---
_id: '8754'
abstract:
- lang: eng
text: In this chapter, we combine a global, derivative-free subdivision algorithm
for multiobjective optimization problems with a posteriori error estimates for
reduced-order models based on Proper Orthogonal Decomposition in order to efficiently
solve multiobjective optimization problems governed by partial differential equations.
An error bound for a semilinear heat equation is developed in such a way that
the errors in the conflicting objectives can be estimated individually. The resulting
algorithm constructs a library of locally valid reduced-order models online using
a Greedy (worst-first) search. Using this approach, the number of evaluations
of the full-order model can be reduced by a factor of more than 1000.
author:
- first_name: Dennis
full_name: Beermann, Dennis
last_name: Beermann
- first_name: Michael
full_name: Dellnitz, Michael
last_name: Dellnitz
- first_name: Sebastian
full_name: Peitz, Sebastian
id: '47427'
last_name: Peitz
orcid: https://orcid.org/0000-0002-3389-793X
- first_name: Stefan
full_name: Volkwein, Stefan
last_name: Volkwein
citation:
ama: 'Beermann D, Dellnitz M, Peitz S, Volkwein S. Set-Oriented Multiobjective Optimal
Control of PDEs Using Proper Orthogonal Decomposition. In: Reduced-Order Modeling
(ROM) for Simulation and Optimization. Cham; 2018:47-72. doi:10.1007/978-3-319-75319-5_3'
apa: Beermann, D., Dellnitz, M., Peitz, S., & Volkwein, S. (2018). Set-Oriented
Multiobjective Optimal Control of PDEs Using Proper Orthogonal Decomposition.
In Reduced-Order Modeling (ROM) for Simulation and Optimization (pp. 47–72).
Cham. https://doi.org/10.1007/978-3-319-75319-5_3
bibtex: '@inbook{Beermann_Dellnitz_Peitz_Volkwein_2018, place={Cham}, title={Set-Oriented
Multiobjective Optimal Control of PDEs Using Proper Orthogonal Decomposition},
DOI={10.1007/978-3-319-75319-5_3},
booktitle={Reduced-Order Modeling (ROM) for Simulation and Optimization}, author={Beermann,
Dennis and Dellnitz, Michael and Peitz, Sebastian and Volkwein, Stefan}, year={2018},
pages={47–72} }'
chicago: Beermann, Dennis, Michael Dellnitz, Sebastian Peitz, and Stefan Volkwein.
“Set-Oriented Multiobjective Optimal Control of PDEs Using Proper Orthogonal Decomposition.”
In Reduced-Order Modeling (ROM) for Simulation and Optimization, 47–72.
Cham, 2018. https://doi.org/10.1007/978-3-319-75319-5_3.
ieee: D. Beermann, M. Dellnitz, S. Peitz, and S. Volkwein, “Set-Oriented Multiobjective
Optimal Control of PDEs Using Proper Orthogonal Decomposition,” in Reduced-Order
Modeling (ROM) for Simulation and Optimization, Cham, 2018, pp. 47–72.
mla: Beermann, Dennis, et al. “Set-Oriented Multiobjective Optimal Control of PDEs
Using Proper Orthogonal Decomposition.” Reduced-Order Modeling (ROM) for Simulation
and Optimization, 2018, pp. 47–72, doi:10.1007/978-3-319-75319-5_3.
short: 'D. Beermann, M. Dellnitz, S. Peitz, S. Volkwein, in: Reduced-Order Modeling
(ROM) for Simulation and Optimization, Cham, 2018, pp. 47–72.'
date_created: 2019-03-29T13:31:20Z
date_updated: 2022-01-06T07:04:00Z
department:
- _id: '101'
doi: 10.1007/978-3-319-75319-5_3
language:
- iso: eng
page: 47-72
place: Cham
project:
- _id: '52'
name: Computing Resources Provided by the Paderborn Center for Parallel Computing
publication: Reduced-Order Modeling (ROM) for Simulation and Optimization
publication_identifier:
isbn:
- '9783319753188'
- '9783319753195'
publication_status: published
status: public
title: Set-Oriented Multiobjective Optimal Control of PDEs Using Proper Orthogonal
Decomposition
type: book_chapter
user_id: '47427'
year: '2018'
...
---
_id: '9999'
abstract:
- lang: eng
text: Ultrasonic wire bonding is an indispensable process in the industrial manufacturing
of semiconductor devices. Copper wire is increasingly replacing the well-established
aluminium wire because of its superior electrical, thermal and mechanical properties.
Copper wire processes differ significantly from aluminium processes and are more
sensitive to disturbances, which reduces the range of parameter values suitable
for a stable process. Disturbances can be compensated by an adaption of process
parameters, but finding suitable parameters manually is difficult and time-consuming.
This paper presents a physical model of the ultrasonic wire bonding process including
the friction contact between tool and wire. This model yields novel insights into
the process. A prototype of a multi-objective optimizing bonding machine (MOBM)
is presented. It uses multi-objective optimization, based on the complete process
model, to automatically select the best operating point as a compromise of concurrent
objectives.
author:
- first_name: Andreas
full_name: Unger, Andreas
last_name: Unger
- first_name: Matthias
full_name: Hunstig, Matthias
last_name: Hunstig
- first_name: Tobias
full_name: Meyer, Tobias
last_name: Meyer
- first_name: Michael
full_name: Brökelmann, Michael
last_name: Brökelmann
- first_name: Walter
full_name: Sextro, Walter
id: '21220'
last_name: Sextro
citation:
ama: 'Unger A, Hunstig M, Meyer T, Brökelmann M, Sextro W. Intelligent Production
of Wire Bonds using Multi-Objective Optimization – Insights, Opportunities and
Challenges. In: In Proceedings of IMAPS 2018 – 51st Symposium on Microelectronics,
Pasadena, CA, 2018. Vol Vol. 2018, No. 1, pp. 000572-000577. ; 2018. doi:10.4071/2380-4505-2018.1.000572'
apa: Unger, A., Hunstig, M., Meyer, T., Brökelmann, M., & Sextro, W. (2018).
Intelligent Production of Wire Bonds using Multi-Objective Optimization – Insights,
Opportunities and Challenges. In In Proceedings of IMAPS 2018 – 51st Symposium
on Microelectronics, Pasadena, CA, 2018 (Vol. Vol. 2018, No. 1, pp. 000572-000577.).
https://doi.org/10.4071/2380-4505-2018.1.000572
bibtex: '@inproceedings{Unger_Hunstig_Meyer_Brökelmann_Sextro_2018, title={Intelligent
Production of Wire Bonds using Multi-Objective Optimization – Insights, Opportunities
and Challenges}, volume={Vol. 2018, No. 1, pp. 000572-000577.}, DOI={10.4071/2380-4505-2018.1.000572},
booktitle={In Proceedings of IMAPS 2018 – 51st Symposium on Microelectronics,
Pasadena, CA, 2018}, author={Unger, Andreas and Hunstig, Matthias and Meyer, Tobias
and Brökelmann, Michael and Sextro, Walter}, year={2018} }'
chicago: Unger, Andreas, Matthias Hunstig, Tobias Meyer, Michael Brökelmann, and
Walter Sextro. “Intelligent Production of Wire Bonds Using Multi-Objective Optimization
– Insights, Opportunities and Challenges.” In In Proceedings of IMAPS 2018
– 51st Symposium on Microelectronics, Pasadena, CA, 2018, Vol. Vol. 2018,
No. 1, pp. 000572-000577., 2018. https://doi.org/10.4071/2380-4505-2018.1.000572.
ieee: A. Unger, M. Hunstig, T. Meyer, M. Brökelmann, and W. Sextro, “Intelligent
Production of Wire Bonds using Multi-Objective Optimization – Insights, Opportunities
and Challenges,” in In Proceedings of IMAPS 2018 – 51st Symposium on Microelectronics,
Pasadena, CA, 2018, 2018, vol. Vol. 2018, No. 1, pp. 000572-000577.
mla: Unger, Andreas, et al. “Intelligent Production of Wire Bonds Using Multi-Objective
Optimization – Insights, Opportunities and Challenges.” In Proceedings of IMAPS
2018 – 51st Symposium on Microelectronics, Pasadena, CA, 2018, vol. Vol. 2018,
No. 1, pp. 000572-000577., 2018, doi:10.4071/2380-4505-2018.1.000572.
short: 'A. Unger, M. Hunstig, T. Meyer, M. Brökelmann, W. Sextro, in: In Proceedings
of IMAPS 2018 – 51st Symposium on Microelectronics, Pasadena, CA, 2018, 2018.'
date_created: 2019-05-27T10:27:45Z
date_updated: 2020-05-07T05:33:56Z
department:
- _id: '151'
doi: 10.4071/2380-4505-2018.1.000572
keyword:
- wire bonding
- multi-objective optimization
- process model
- copper wire
- self-optimization
language:
- iso: eng
project:
- _id: '92'
grant_number: 02 PQ2210
name: Intelligente Herstellung zuverlässiger Kupferbondverbindungen
publication: In Proceedings of IMAPS 2018 – 51st Symposium on Microelectronics, Pasadena,
CA, 2018
quality_controlled: '1'
status: public
title: Intelligent Production of Wire Bonds using Multi-Objective Optimization – Insights,
Opportunities and Challenges
type: conference
user_id: '210'
volume: Vol. 2018, No. 1, pp. 000572-000577.
year: '2018'
...
---
_id: '3930'
author:
- first_name: Katharina
full_name: Brassat, Katharina
id: '11305'
last_name: Brassat
- first_name: A.
full_name: Taube, A.
last_name: Taube
- first_name: Daniel
full_name: Kool, Daniel
id: '44586'
last_name: Kool
- first_name: L.
full_name: Tasche, L.
last_name: Tasche
- first_name: K.P.
full_name: Hoyer, K.P.
last_name: Hoyer
- first_name: Mirko
full_name: Schaper, Mirko
last_name: Schaper
- first_name: Jörg
full_name: Lindner, Jörg
id: '20797'
last_name: Lindner
citation:
ama: 'Brassat K, Taube A, Kool D, et al. Ti-6Al-4V alloy: 3D printing of lightweight
implants and nanopatterning by self-assembly. In: ; 2018.'
apa: 'Brassat, K., Taube, A., Kool, D., Tasche, L., Hoyer, K. P., Schaper, M., &
Lindner, J. (2018). Ti-6Al-4V alloy: 3D printing of lightweight implants and nanopatterning
by self-assembly. Presented at the EMRS-Fall Meeting 2018, Warsaw, Poland.'
bibtex: '@inproceedings{Brassat_Taube_Kool_Tasche_Hoyer_Schaper_Lindner_2018, title={Ti-6Al-4V
alloy: 3D printing of lightweight implants and nanopatterning by self-assembly},
author={Brassat, Katharina and Taube, A. and Kool, Daniel and Tasche, L. and Hoyer,
K.P. and Schaper, Mirko and Lindner, Jörg}, year={2018} }'
chicago: 'Brassat, Katharina, A. Taube, Daniel Kool, L. Tasche, K.P. Hoyer, Mirko
Schaper, and Jörg Lindner. “Ti-6Al-4V Alloy: 3D Printing of Lightweight Implants
and Nanopatterning by Self-Assembly,” 2018.'
ieee: 'K. Brassat et al., “Ti-6Al-4V alloy: 3D printing of lightweight implants
and nanopatterning by self-assembly,” presented at the EMRS-Fall Meeting 2018,
Warsaw, Poland, 2018.'
mla: 'Brassat, Katharina, et al. Ti-6Al-4V Alloy: 3D Printing of Lightweight
Implants and Nanopatterning by Self-Assembly. 2018.'
short: 'K. Brassat, A. Taube, D. Kool, L. Tasche, K.P. Hoyer, M. Schaper, J. Lindner,
in: 2018.'
conference:
end_date: 2018-09-20
location: Warsaw, Poland
name: EMRS-Fall Meeting 2018
start_date: 2018-09-17
date_created: 2018-08-16T13:18:03Z
date_updated: 2022-01-06T06:59:56Z
department:
- _id: '286'
- _id: '15'
status: public
title: 'Ti-6Al-4V alloy: 3D printing of lightweight implants and nanopatterning by
self-assembly'
type: conference
user_id: '55706'
year: '2018'
...
---
_id: '669'
abstract:
- lang: eng
text: We study a new class of games which generalizes congestion games andits bottleneck
variant. We introduce congestion games with mixed objectives to modelnetwork scenarios
in which players seek to optimize for latency and bandwidths alike.We characterize
the (non-)existence of pure Nash equilibria (PNE), the convergenceof improvement
dynamics, the quality of equilibria and show the complexity of thedecision problem.
For games that do not possess PNE we give bounds on the approx-imation ratio of
approximate pure Nash equilibria.
author:
- first_name: Matthias
full_name: Feldotto, Matthias
id: '14052'
last_name: Feldotto
orcid: 0000-0003-1348-6516
- first_name: Lennart
full_name: Leder, Lennart
last_name: Leder
- first_name: Alexander
full_name: Skopalik, Alexander
id: '40384'
last_name: Skopalik
citation:
ama: Feldotto M, Leder L, Skopalik A. Congestion games with mixed objectives. Journal
of Combinatorial Optimization. 2018;36(4):1145-1167. doi:10.1007/s10878-017-0189-y
apa: Feldotto, M., Leder, L., & Skopalik, A. (2018). Congestion games with mixed
objectives. Journal of Combinatorial Optimization, 36(4), 1145–1167.
https://doi.org/10.1007/s10878-017-0189-y
bibtex: '@article{Feldotto_Leder_Skopalik_2018, title={Congestion games with mixed
objectives}, volume={36}, DOI={10.1007/s10878-017-0189-y},
number={4}, journal={Journal of Combinatorial Optimization}, publisher={Springer
Nature}, author={Feldotto, Matthias and Leder, Lennart and Skopalik, Alexander},
year={2018}, pages={1145–1167} }'
chicago: 'Feldotto, Matthias, Lennart Leder, and Alexander Skopalik. “Congestion
Games with Mixed Objectives.” Journal of Combinatorial Optimization 36,
no. 4 (2018): 1145–67. https://doi.org/10.1007/s10878-017-0189-y.'
ieee: M. Feldotto, L. Leder, and A. Skopalik, “Congestion games with mixed objectives,”
Journal of Combinatorial Optimization, vol. 36, no. 4, pp. 1145–1167, 2018.
mla: Feldotto, Matthias, et al. “Congestion Games with Mixed Objectives.” Journal
of Combinatorial Optimization, vol. 36, no. 4, Springer Nature, 2018, pp.
1145–67, doi:10.1007/s10878-017-0189-y.
short: M. Feldotto, L. Leder, A. Skopalik, Journal of Combinatorial Optimization
36 (2018) 1145–1167.
date_created: 2017-10-26T14:11:04Z
date_updated: 2022-01-06T07:03:15Z
ddc:
- '000'
department:
- _id: '63'
- _id: '541'
doi: 10.1007/s10878-017-0189-y
external_id:
arxiv:
- '1607.05143'
file:
- access_level: closed
content_type: application/pdf
creator: feldi
date_created: 2018-10-31T16:57:32Z
date_updated: 2018-10-31T16:57:32Z
file_id: '5226'
file_name: Feldotto2018_Article_CongestionGamesWithMixedObject.pdf
file_size: 605207
relation: main_file
success: 1
file_date_updated: 2018-10-31T16:57:32Z
has_accepted_license: '1'
intvolume: ' 36'
issue: '4'
language:
- iso: eng
page: 1145-1167
project:
- _id: '1'
name: SFB 901
- _id: '7'
name: SFB 901 - Subprojekt A3
- _id: '2'
name: SFB 901 - Project Area A
publication: Journal of Combinatorial Optimization
publication_identifier:
issn:
- 1382-6905
- 1573-2886
publication_status: published
publisher: Springer Nature
status: public
title: Congestion games with mixed objectives
type: journal_article
user_id: '14052'
volume: 36
year: '2018'
...
---
_id: '6970'
abstract:
- lang: eng
text: "Dynamic allocation of resources is a key feature in network function virtualization
(NFV), enabling flexible adjustment of slices and contained network services to
ever-changing service demands. \r\nConsidering resource allocation across the
entire network, many authors have proposed approaches to optimize the placement
and chaining of virtual network function (VNF) instances and the allocation of
resources to these VNF instances. In doing so, various optimization objectives
are conceivable, e.g., minimizing certain required resources or the end-to-end
delay of the placed services.\r\n\r\nIn this paper, we investigate the relationship
between four typical optimization objectives when coordinating the placement and
resource allocation of chained VNF instances. We observe an interesting trade-off
between minimizing the overhead of starting/stopping VNF instances and all other
objectives when adapting to changed service demands."
author:
- first_name: Stefan Balthasar
full_name: Schneider, Stefan Balthasar
id: '35343'
last_name: Schneider
orcid: 0000-0001-8210-4011
- first_name: Sevil
full_name: Dräxler, Sevil
id: '31764'
last_name: Dräxler
- first_name: Holger
full_name: Karl, Holger
id: '126'
last_name: Karl
citation:
ama: 'Schneider SB, Dräxler S, Karl H. Trade-offs in Dynamic Resource Allocation
in Network Function Virtualization. In: IEEE Global Communications Conference
(GLOBECOM 2018). IEEE; 2018.'
apa: 'Schneider, S. B., Dräxler, S., & Karl, H. (2018). Trade-offs in Dynamic
Resource Allocation in Network Function Virtualization. In IEEE Global Communications
Conference (GLOBECOM 2018). Abu Dhabi, UAE: IEEE.'
bibtex: '@inproceedings{Schneider_Dräxler_Karl_2018, title={Trade-offs in Dynamic
Resource Allocation in Network Function Virtualization}, booktitle={IEEE Global
Communications Conference (GLOBECOM 2018)}, publisher={IEEE}, author={Schneider,
Stefan Balthasar and Dräxler, Sevil and Karl, Holger}, year={2018} }'
chicago: Schneider, Stefan Balthasar, Sevil Dräxler, and Holger Karl. “Trade-Offs
in Dynamic Resource Allocation in Network Function Virtualization.” In IEEE
Global Communications Conference (GLOBECOM 2018). IEEE, 2018.
ieee: S. B. Schneider, S. Dräxler, and H. Karl, “Trade-offs in Dynamic Resource
Allocation in Network Function Virtualization,” in IEEE Global Communications
Conference (GLOBECOM 2018), Abu Dhabi, UAE, 2018.
mla: Schneider, Stefan Balthasar, et al. “Trade-Offs in Dynamic Resource Allocation
in Network Function Virtualization.” IEEE Global Communications Conference
(GLOBECOM 2018), IEEE, 2018.
short: 'S.B. Schneider, S. Dräxler, H. Karl, in: IEEE Global Communications Conference
(GLOBECOM 2018), IEEE, 2018.'
conference:
location: Abu Dhabi, UAE
name: IEEE Global Communications Conference (GLOBECOM 2018)
date_created: 2019-01-24T13:53:22Z
date_updated: 2022-01-06T07:03:24Z
ddc:
- '040'
department:
- _id: '75'
file:
- access_level: open_access
content_type: application/pdf
creator: stschn
date_created: 2019-01-24T13:53:16Z
date_updated: 2019-01-24T13:53:16Z
file_id: '6971'
file_name: preprint_ris.pdf
file_size: 422196
relation: main_file
file_date_updated: 2019-01-24T13:53:16Z
has_accepted_license: '1'
language:
- iso: eng
oa: '1'
project:
- _id: '28'
grant_number: '761493'
name: 5G Development and validation platform for global industry-specific network
services and Apps
- _id: '1'
name: SFB 901
- _id: '4'
name: SFB 901 - Project Area C
- _id: '16'
name: SFB 901 - Subproject C4
publication: IEEE Global Communications Conference (GLOBECOM 2018)
publisher: IEEE
status: public
title: Trade-offs in Dynamic Resource Allocation in Network Function Virtualization
type: conference
user_id: '35343'
year: '2018'
...
---
_id: '16425'
abstract:
- lang: eng
text: 'In recent years, OpenCL has been increasingly adopted as it enables software
programmers to harness the performance and power efficiency of FPGAs. Despite
simplifying the FPGA programming challenge, achieving high performance and energy
efficiency with OpenCL is still a difficult task. In order to further contribute
to the advance of the OpenCL usage for FPGAs, we utilize a realistic application
scenario as our case study: the AutoDock molecular docking software. While OpenCL
has proven its effectiveness in accelerating molecular docking on GPUs, for FPGA-based
AutoDock accelerators it struggles with difficult design patterns. Besides complex
multiple-producers to single-consumer datapaths, these include time-intensive
loops with variable runtimes. Therefore, this work presents the design and optimization
steps for implementing AutoDock in OpenCL targeting an Arria-10 FPGA, as well
as a corresponding execution runtime and energy-efficiency evaluation. Applying
these techniques improved the performance of the initial OpenCL implementation
for FPGAs by three orders of magnitude, with the final version of the code now
yielding speed-ups of up to ~2.7x, and energy-efficiency gains of up to ~1.8x
over the original serial AutoDock version executing on a current-generation CPU.'
author:
- first_name: Leonardo
full_name: Solis-Vasquez, Leonardo
last_name: Solis-Vasquez
- first_name: Andreas
full_name: Koch, Andreas
last_name: Koch
citation:
ama: 'Solis-Vasquez L, Koch A. A Case Study in Using OpenCL on FPGAs: Creating an
Open-Source Accelerator of the AutoDock Molecular Docking Software. In: FSP
Workshop 2018; Fifth International Workshop on FPGAs for Software Programmers.
; 2018:1-10.'
apa: 'Solis-Vasquez, L., & Koch, A. (2018). A Case Study in Using OpenCL on
FPGAs: Creating an Open-Source Accelerator of the AutoDock Molecular Docking Software.
In FSP Workshop 2018; Fifth International Workshop on FPGAs for Software Programmers
(pp. 1–10).'
bibtex: '@inproceedings{Solis-Vasquez_Koch_2018, title={A Case Study in Using OpenCL
on FPGAs: Creating an Open-Source Accelerator of the AutoDock Molecular Docking
Software}, booktitle={FSP Workshop 2018; Fifth International Workshop on FPGAs
for Software Programmers}, author={Solis-Vasquez, Leonardo and Koch, Andreas},
year={2018}, pages={1–10} }'
chicago: 'Solis-Vasquez, Leonardo, and Andreas Koch. “A Case Study in Using OpenCL
on FPGAs: Creating an Open-Source Accelerator of the AutoDock Molecular Docking
Software.” In FSP Workshop 2018; Fifth International Workshop on FPGAs for
Software Programmers, 1–10, 2018.'
ieee: 'L. Solis-Vasquez and A. Koch, “A Case Study in Using OpenCL on FPGAs: Creating
an Open-Source Accelerator of the AutoDock Molecular Docking Software,” in FSP
Workshop 2018; Fifth International Workshop on FPGAs for Software Programmers,
2018, pp. 1–10.'
mla: 'Solis-Vasquez, Leonardo, and Andreas Koch. “A Case Study in Using OpenCL on
FPGAs: Creating an Open-Source Accelerator of the AutoDock Molecular Docking Software.”
FSP Workshop 2018; Fifth International Workshop on FPGAs for Software Programmers,
2018, pp. 1–10.'
short: 'L. Solis-Vasquez, A. Koch, in: FSP Workshop 2018; Fifth International Workshop
on FPGAs for Software Programmers, 2018, pp. 1–10.'
date_created: 2020-04-06T12:23:38Z
date_updated: 2022-01-06T06:52:50Z
keyword:
- pc2-harp-ressources
language:
- iso: eng
page: 1-10
publication: FSP Workshop 2018; Fifth International Workshop on FPGAs for Software
Programmers
status: public
title: 'A Case Study in Using OpenCL on FPGAs: Creating an Open-Source Accelerator
of the AutoDock Molecular Docking Software'
type: conference
user_id: '61189'
year: '2018'
...
---
_id: '1181'
abstract:
- lang: eng
text: "The main idea in On-The-Fly Computing is to automatically compose existing
software services according to the wishes of end-users. However, since user requirements
are often ambiguous, vague and incomplete, the selection and composition of suitable
software services is a challanging task. In this paper, we present our current
approach to improve requirement descriptions before they are used for software
composition. This procedure is fully automated, but also has limitations, for
example, if necessary information is missing. In addition, and in response to
the limitations, we provide insights into our above-mentioned current work that
combines the existing optimization approach with a\r\nchatbot solution."
author:
- first_name: Frederik Simon
full_name: Bäumer, Frederik Simon
id: '38837'
last_name: Bäumer
- first_name: Michaela
full_name: Geierhos, Michaela
id: '42496'
last_name: Geierhos
orcid: 0000-0002-8180-5606
citation:
ama: 'Bäumer FS, Geierhos M. How to Deal with Inaccurate Service Requirements? Insights
in Our Current Approach and New Ideas. In: Schmid K, Spoletini P, Ben Charrada
E, et al., eds. Joint Proceedings of REFSQ-2018 Workshops, Doctoral Symposium,
Live Studies Track, and Poster Track Co-Located with the 23rd International Conference
on Requirements Engineering: Foundation for Software Quality (REFSQ 2018).
Vol 2075. CEUR Workshop Proceedings. CEUR-WS.org; 2018.'
apa: 'Bäumer, F. S., & Geierhos, M. (2018). How to Deal with Inaccurate Service
Requirements? Insights in Our Current Approach and New Ideas. In K. Schmid, P.
Spoletini, E. Ben Charrada, Y. Chisik, F. Dalpiaz, A. Ferrari, … A. Zamansky (Eds.),
Joint Proceedings of REFSQ-2018 Workshops, Doctoral Symposium, Live Studies
Track, and Poster Track co-located with the 23rd International Conference on Requirements
Engineering: Foundation for Software Quality (REFSQ 2018) (Vol. 2075). Utrecht,
The Netherlands: CEUR-WS.org.'
bibtex: '@inproceedings{Bäumer_Geierhos_2018, series={CEUR Workshop Proceedings},
title={How to Deal with Inaccurate Service Requirements? Insights in Our Current
Approach and New Ideas}, volume={2075}, booktitle={Joint Proceedings of REFSQ-2018
Workshops, Doctoral Symposium, Live Studies Track, and Poster Track co-located
with the 23rd International Conference on Requirements Engineering: Foundation
for Software Quality (REFSQ 2018)}, publisher={CEUR-WS.org}, author={Bäumer, Frederik
Simon and Geierhos, Michaela}, editor={Schmid, Klaus and Spoletini, Paola and
Ben Charrada, Eya and Chisik, Yoram and Dalpiaz, Fabiano and Ferrari, Alessio
and Forbrig, Peter and Franch, Xavier and Kirikova, Marite and Madhavji, Nazim
and et al.Editors}, year={2018}, collection={CEUR Workshop Proceedings} }'
chicago: 'Bäumer, Frederik Simon, and Michaela Geierhos. “How to Deal with Inaccurate
Service Requirements? Insights in Our Current Approach and New Ideas.” In Joint
Proceedings of REFSQ-2018 Workshops, Doctoral Symposium, Live Studies Track, and
Poster Track Co-Located with the 23rd International Conference on Requirements
Engineering: Foundation for Software Quality (REFSQ 2018), edited by Klaus
Schmid, Paola Spoletini, Eya Ben Charrada, Yoram Chisik, Fabiano Dalpiaz, Alessio
Ferrari, Peter Forbrig, et al., Vol. 2075. CEUR Workshop Proceedings. CEUR-WS.org,
2018.'
ieee: 'F. S. Bäumer and M. Geierhos, “How to Deal with Inaccurate Service Requirements?
Insights in Our Current Approach and New Ideas,” in Joint Proceedings of REFSQ-2018
Workshops, Doctoral Symposium, Live Studies Track, and Poster Track co-located
with the 23rd International Conference on Requirements Engineering: Foundation
for Software Quality (REFSQ 2018), Utrecht, The Netherlands, 2018, vol. 2075.'
mla: 'Bäumer, Frederik Simon, and Michaela Geierhos. “How to Deal with Inaccurate
Service Requirements? Insights in Our Current Approach and New Ideas.” Joint
Proceedings of REFSQ-2018 Workshops, Doctoral Symposium, Live Studies Track, and
Poster Track Co-Located with the 23rd International Conference on Requirements
Engineering: Foundation for Software Quality (REFSQ 2018), edited by Klaus
Schmid et al., vol. 2075, CEUR-WS.org, 2018.'
short: 'F.S. Bäumer, M. Geierhos, in: K. Schmid, P. Spoletini, E. Ben Charrada,
Y. Chisik, F. Dalpiaz, A. Ferrari, P. Forbrig, X. Franch, M. Kirikova, N. Madhavji,
C. Palomares, J. Ralyté, M. Sabetzadeh, P. Sawyer, D. van der Linden, A. Zamansky
(Eds.), Joint Proceedings of REFSQ-2018 Workshops, Doctoral Symposium, Live Studies
Track, and Poster Track Co-Located with the 23rd International Conference on Requirements
Engineering: Foundation for Software Quality (REFSQ 2018), CEUR-WS.org, 2018.'
conference:
end_date: 2018-03-19
location: Utrecht, The Netherlands
name: 1st Workshop on Natural Language Processing for Requirements Engineering (NLP4RE)
start_date: 2018-03-19
date_created: 2018-03-02T09:22:12Z
date_updated: 2022-01-06T06:51:09Z
ddc:
- '000'
department:
- _id: '36'
- _id: '1'
- _id: '579'
editor:
- first_name: Klaus
full_name: Schmid, Klaus
last_name: Schmid
- first_name: Paola
full_name: Spoletini, Paola
last_name: Spoletini
- first_name: Eya
full_name: Ben Charrada, Eya
last_name: Ben Charrada
- first_name: Yoram
full_name: Chisik, Yoram
last_name: Chisik
- first_name: Fabiano
full_name: Dalpiaz, Fabiano
last_name: Dalpiaz
- first_name: Alessio
full_name: Ferrari, Alessio
last_name: Ferrari
- first_name: Peter
full_name: Forbrig, Peter
last_name: Forbrig
- first_name: Xavier
full_name: Franch, Xavier
last_name: Franch
- first_name: Marite
full_name: Kirikova, Marite
last_name: Kirikova
- first_name: Nazim
full_name: Madhavji, Nazim
last_name: Madhavji
- first_name: Cristina
full_name: Palomares, Cristina
last_name: Palomares
- first_name: Jolita
full_name: Ralyté, Jolita
last_name: Ralyté
- first_name: Mehrdad
full_name: Sabetzadeh, Mehrdad
last_name: Sabetzadeh
- first_name: Pete
full_name: Sawyer, Pete
last_name: Sawyer
- first_name: Dirk
full_name: van der Linden, Dirk
last_name: van der Linden
- first_name: Anna
full_name: Zamansky, Anna
last_name: Zamansky
file:
- access_level: closed
content_type: application/pdf
creator: ups
date_created: 2018-11-02T13:52:54Z
date_updated: 2018-11-02T13:52:54Z
file_id: '5256'
file_name: NLP4RE_paper1.pdf
file_size: 1126820
relation: main_file
success: 1
file_date_updated: 2018-11-02T13:52:54Z
has_accepted_license: '1'
intvolume: ' 2075'
language:
- iso: eng
main_file_link:
- open_access: '1'
url: http://ceur-ws.org/Vol-2075/NLP4RE_paper1.pdf
oa: '1'
project:
- _id: '1'
name: SFB 901
- _id: '3'
name: SFB 901 - Project Area B
- _id: '9'
name: SFB 901 - Subproject B1
publication: 'Joint Proceedings of REFSQ-2018 Workshops, Doctoral Symposium, Live
Studies Track, and Poster Track co-located with the 23rd International Conference
on Requirements Engineering: Foundation for Software Quality (REFSQ 2018)'
publication_identifier:
issn:
- 1613-0073
publication_status: published
publisher: CEUR-WS.org
quality_controlled: '1'
series_title: CEUR Workshop Proceedings
status: public
title: How to Deal with Inaccurate Service Requirements? Insights in Our Current Approach
and New Ideas
type: conference
user_id: '477'
volume: 2075
year: '2018'
...
---
_id: '15585'
author:
- first_name: Roman
full_name: Bednarik, Roman
last_name: Bednarik
- first_name: Carsten
full_name: Schulte, Carsten
id: '60311'
last_name: Schulte
- first_name: Lea
full_name: Budde, Lea
id: '32443'
last_name: Budde
- first_name: Birte
full_name: Heinemann, Birte
last_name: Heinemann
- first_name: Hana
full_name: Vrzakova, Hana
last_name: Vrzakova
citation:
ama: 'Bednarik R, Schulte C, Budde L, Heinemann B, Vrzakova H. Eye-movement Modeling
Examples in Source Code Comprehension: A Classroom Study. In: Proceedings of
the 18th Koli Calling International Conference on Computing Education Research,
Koli, Finland, November 22-25, 2018. ; 2018:2:1-2:8. doi:10.1145/3279720.3279722'
apa: 'Bednarik, R., Schulte, C., Budde, L., Heinemann, B., & Vrzakova, H. (2018).
Eye-movement Modeling Examples in Source Code Comprehension: A Classroom Study.
In Proceedings of the 18th Koli Calling International Conference on Computing
Education Research, Koli, Finland, November 22-25, 2018 (pp. 2:1-2:8). https://doi.org/10.1145/3279720.3279722'
bibtex: '@inproceedings{Bednarik_Schulte_Budde_Heinemann_Vrzakova_2018, title={Eye-movement
Modeling Examples in Source Code Comprehension: A Classroom Study}, DOI={10.1145/3279720.3279722},
booktitle={Proceedings of the 18th Koli Calling International Conference on Computing
Education Research, Koli, Finland, November 22-25, 2018}, author={Bednarik, Roman
and Schulte, Carsten and Budde, Lea and Heinemann, Birte and Vrzakova, Hana},
year={2018}, pages={2:1-2:8} }'
chicago: 'Bednarik, Roman, Carsten Schulte, Lea Budde, Birte Heinemann, and Hana
Vrzakova. “Eye-Movement Modeling Examples in Source Code Comprehension: A Classroom
Study.” In Proceedings of the 18th Koli Calling International Conference on
Computing Education Research, Koli, Finland, November 22-25, 2018, 2:1-2:8,
2018. https://doi.org/10.1145/3279720.3279722.'
ieee: 'R. Bednarik, C. Schulte, L. Budde, B. Heinemann, and H. Vrzakova, “Eye-movement
Modeling Examples in Source Code Comprehension: A Classroom Study,” in Proceedings
of the 18th Koli Calling International Conference on Computing Education Research,
Koli, Finland, November 22-25, 2018, 2018, pp. 2:1-2:8.'
mla: 'Bednarik, Roman, et al. “Eye-Movement Modeling Examples in Source Code Comprehension:
A Classroom Study.” Proceedings of the 18th Koli Calling International Conference
on Computing Education Research, Koli, Finland, November 22-25, 2018, 2018,
pp. 2:1-2:8, doi:10.1145/3279720.3279722.'
short: 'R. Bednarik, C. Schulte, L. Budde, B. Heinemann, H. Vrzakova, in: Proceedings
of the 18th Koli Calling International Conference on Computing Education Research,
Koli, Finland, November 22-25, 2018, 2018, pp. 2:1-2:8.'
date_created: 2020-01-15T09:00:46Z
date_updated: 2022-01-06T06:52:30Z
department:
- _id: '67'
doi: 10.1145/3279720.3279722
language:
- iso: eng
page: 2:1-2:8
publication: Proceedings of the 18th Koli Calling International Conference on Computing
Education Research, Koli, Finland, November 22-25, 2018
status: public
title: 'Eye-movement Modeling Examples in Source Code Comprehension: A Classroom Study'
type: conference
user_id: '21145'
year: '2018'
...
---
_id: '14856'
author:
- first_name: Corinna
full_name: Hallmann, Corinna
last_name: Hallmann
- first_name: Sascha Christian
full_name: Burmeister, Sascha Christian
id: '32685'
last_name: Burmeister
- first_name: Michaela
full_name: Wissing, Michaela
id: '32439'
last_name: Wissing
- first_name: Leena
full_name: Suhl, Leena
last_name: Suhl
citation:
ama: 'Hallmann C, Burmeister SC, Wissing M, Suhl L. Heuristics and Simulation for
Water Tank Optimization. In: Communications in Computer and Information Science.
Cham; 2018. doi:10.1007/978-3-319-96271-9_5'
apa: Hallmann, C., Burmeister, S. C., Wissing, M., & Suhl, L. (2018). Heuristics
and Simulation for Water Tank Optimization. In Communications in Computer and
Information Science. Cham. https://doi.org/10.1007/978-3-319-96271-9_5
bibtex: '@inbook{Hallmann_Burmeister_Wissing_Suhl_2018, place={Cham}, title={Heuristics
and Simulation for Water Tank Optimization}, DOI={10.1007/978-3-319-96271-9_5},
booktitle={Communications in Computer and Information Science}, author={Hallmann,
Corinna and Burmeister, Sascha Christian and Wissing, Michaela and Suhl, Leena},
year={2018} }'
chicago: Hallmann, Corinna, Sascha Christian Burmeister, Michaela Wissing, and Leena
Suhl. “Heuristics and Simulation for Water Tank Optimization.” In Communications
in Computer and Information Science. Cham, 2018. https://doi.org/10.1007/978-3-319-96271-9_5.
ieee: C. Hallmann, S. C. Burmeister, M. Wissing, and L. Suhl, “Heuristics and Simulation
for Water Tank Optimization,” in Communications in Computer and Information
Science, Cham, 2018.
mla: Hallmann, Corinna, et al. “Heuristics and Simulation for Water Tank Optimization.”
Communications in Computer and Information Science, 2018, doi:10.1007/978-3-319-96271-9_5.
short: 'C. Hallmann, S.C. Burmeister, M. Wissing, L. Suhl, in: Communications in
Computer and Information Science, Cham, 2018.'
date_created: 2019-11-08T08:10:10Z
date_updated: 2022-01-06T06:52:08Z
department:
- _id: '277'
doi: 10.1007/978-3-319-96271-9_5
language:
- iso: eng
place: Cham
publication: Communications in Computer and Information Science
publication_identifier:
isbn:
- '9783319962702'
- '9783319962719'
issn:
- 1865-0929
- 1865-0937
publication_status: published
status: public
title: Heuristics and Simulation for Water Tank Optimization
type: book_chapter
user_id: '32439'
year: '2018'
...