---
_id: '22420'
abstract:
- lang: eng
text: 'Additive Fertigungsverfahren (engl.: Additive Manufacturing, kurz: AM) ermöglichen
die werkzeuglose Herstellung von Komponenten und kompletten Baugruppen direkt
aus dem 3D-CAD-Modell. Insbesondere additiv hergestellte Leichtbaukonstruktionen
weisen ein hohes Potential für den Elektromaschinenbau auf. In diesem Paper werden
erste Ansätze zur additiven Fertigung einer Rotorwelle für eine permanentmagneterregte
Synchronmaschine (PMSM) aufgezeigt. Die Verbesserung einer ausgeprägten Leichtbaukonstruktion
der Rotorwelle sowie die Charakterisierung des additiv verarbeiteten Werkstoffs
werden aufgeführt. Hierzu wurden Prüfkörper aus dem Werkstoffs H13 (1.2344) hergestellt.
Des Weiteren wurden Prüfkörper additiv gefertigter Gitterstrukturen entwickelt
und untersucht. Zur Werkstoffcharakterisierung wurden sowohl mechanische Eigenschaften
ermittelt, wie die Streckgrenze, die Zugfestigkeit und die Härte als auch elektromagnetische
Eigenschaften, wie die Koerzitivfeldstärke, die elektrische Leitfähigkeit und
die Permeabilität. Die Ergebnisse zeigen, dass die magnetischen Eigenschaften
von H13 durch eine angeschlossene Wärmebehandlung deutlich verbessert werden konnten.
Im Anschluss an die Werkstoffcharakterisierung wurde ein innovatives Leichtbau-Rotorwellenkonzept
mit internen Gitterstrukturen entwickelt. Verglichen mit einem konventionell gefertigten
Rotor konnte die Rotormasse um 25% reduziert werden sowie das Massenträgheitsmoment
um 23% reduziert werden bei einer Testdrehzahl von 3000 U/min und einem Drehmoment
von 71,98 Nm.'
author:
- first_name: Stefan
full_name: Lammers, Stefan
id: '13835'
last_name: Lammers
- first_name: Francesco
full_name: Quattrone, Francesco
last_name: Quattrone
- first_name: Rafael
full_name: Mrozek, Rafael
last_name: Mrozek
- first_name: Detmar
full_name: Zimmer, Detmar
id: '604'
last_name: Zimmer
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
last_name: Schmid
- first_name: Bernd
full_name: Ponick, Bernd
last_name: Ponick
- first_name: Michael
full_name: Hoffmann, Michael
last_name: Hoffmann
citation:
ama: 'Lammers S, Quattrone F, Mrozek R, et al. Entwicklung und additive Herstellung
einer Leichtbau-Rotorwelle für eine permanentmagneterregte Synchronmaschine. In:
Proceedings of the 14th Rapid.Tech Conference. Hanser Verlag; 2017:80-93.
doi:10.3139/9783446454606.006'
apa: Lammers, S., Quattrone, F., Mrozek, R., Zimmer, D., Schmid, H.-J., Ponick,
B., & Hoffmann, M. (2017). Entwicklung und additive Herstellung einer Leichtbau-Rotorwelle
für eine permanentmagneterregte Synchronmaschine. In Proceedings of the 14th
Rapid.Tech Conference (pp. 80–93). Hanser Verlag. https://doi.org/10.3139/9783446454606.006
bibtex: '@inproceedings{Lammers_Quattrone_Mrozek_Zimmer_Schmid_Ponick_Hoffmann_2017,
title={Entwicklung und additive Herstellung einer Leichtbau-Rotorwelle für eine
permanentmagneterregte Synchronmaschine}, DOI={10.3139/9783446454606.006},
booktitle={Proceedings of the 14th Rapid.Tech Conference}, publisher={Hanser Verlag},
author={Lammers, Stefan and Quattrone, Francesco and Mrozek, Rafael and Zimmer,
Detmar and Schmid, Hans-Joachim and Ponick, Bernd and Hoffmann, Michael}, year={2017},
pages={80–93} }'
chicago: Lammers, Stefan, Francesco Quattrone, Rafael Mrozek, Detmar Zimmer, Hans-Joachim
Schmid, Bernd Ponick, and Michael Hoffmann. “Entwicklung Und Additive Herstellung
Einer Leichtbau-Rotorwelle Für Eine Permanentmagneterregte Synchronmaschine.”
In Proceedings of the 14th Rapid.Tech Conference, 80–93. Hanser Verlag,
2017. https://doi.org/10.3139/9783446454606.006.
ieee: S. Lammers et al., “Entwicklung und additive Herstellung einer Leichtbau-Rotorwelle
für eine permanentmagneterregte Synchronmaschine,” in Proceedings of the 14th
Rapid.Tech Conference, 2017, pp. 80–93.
mla: Lammers, Stefan, et al. “Entwicklung Und Additive Herstellung Einer Leichtbau-Rotorwelle
Für Eine Permanentmagneterregte Synchronmaschine.” Proceedings of the 14th
Rapid.Tech Conference, Hanser Verlag, 2017, pp. 80–93, doi:10.3139/9783446454606.006.
short: 'S. Lammers, F. Quattrone, R. Mrozek, D. Zimmer, H.-J. Schmid, B. Ponick,
M. Hoffmann, in: Proceedings of the 14th Rapid.Tech Conference, Hanser Verlag,
2017, pp. 80–93.'
date_created: 2021-06-15T11:09:50Z
date_updated: 2022-01-06T06:55:32Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
doi: 10.3139/9783446454606.006
language:
- iso: eng
page: 80-93
publication: Proceedings of the 14th Rapid.Tech Conference
publication_identifier:
isbn:
- 978-3-446-45459-0
publisher: Hanser Verlag
status: public
title: Entwicklung und additive Herstellung einer Leichtbau-Rotorwelle für eine permanentmagneterregte
Synchronmaschine
type: conference
user_id: '38077'
year: '2017'
...
---
_id: '22422'
author:
- first_name: Frederick
full_name: Knoop, Frederick
last_name: Knoop
- first_name: Tobias
full_name: Lieneke, Tobias
id: '13956'
last_name: Lieneke
citation:
ama: 'Knoop F, Lieneke T. Dimensional Tolerances for Additive Manufacturing: Fused
Deposition Modeling. In: Inside 3D Printing 2017. ; 2017.'
apa: 'Knoop, F., & Lieneke, T. (2017). Dimensional Tolerances for Additive Manufacturing:
Fused Deposition Modeling. In Inside 3D Printing 2017.'
bibtex: '@inproceedings{Knoop_Lieneke_2017, title={Dimensional Tolerances for Additive
Manufacturing: Fused Deposition Modeling}, booktitle={Inside 3D Printing 2017},
author={Knoop, Frederick and Lieneke, Tobias}, year={2017} }'
chicago: 'Knoop, Frederick, and Tobias Lieneke. “Dimensional Tolerances for Additive
Manufacturing: Fused Deposition Modeling.” In Inside 3D Printing 2017,
2017.'
ieee: 'F. Knoop and T. Lieneke, “Dimensional Tolerances for Additive Manufacturing:
Fused Deposition Modeling,” in Inside 3D Printing 2017, 2017.'
mla: 'Knoop, Frederick, and Tobias Lieneke. “Dimensional Tolerances for Additive
Manufacturing: Fused Deposition Modeling.” Inside 3D Printing 2017, 2017.'
short: 'F. Knoop, T. Lieneke, in: Inside 3D Printing 2017, 2017.'
date_created: 2021-06-15T11:09:52Z
date_updated: 2022-01-06T06:55:32Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
- _id: '367'
language:
- iso: eng
publication: Inside 3D Printing 2017
status: public
title: 'Dimensional Tolerances for Additive Manufacturing: Fused Deposition Modeling'
type: conference
user_id: '38077'
year: '2017'
...
---
_id: '21691'
abstract:
- lang: eng
text: Designing parts for additive manufacturing (AM) offers a broad range of geometrical
and functional potentials. On the one hand the manufacturingtechnology offers
the possibility of manufacturing highly complex freeform shapes, often referred
to as bionic shapes. By use of these, perfect force fluxes without stress risings
due to imperfect notches are realizable, getting the most value of used material.
On the other hand these complex structures require a reliable geometry representation
in compatible CAD-files. Conventional CAD systems were developed to generate geometries
that are manufacturable with conventional machining. These are not capable of
representing the high complex designs for AM. Especially for geometries generated
by CAE like from topology optimization the conventional CAD systems fail to take
advantage of the combination of CAE and AM. This paper explains why there is a
lack of compatibility of well-known CAD systems with the potentials of AM. Therefore
the AM-side of the problem is described by showing some potentials of AM and the
need of high complex structures for this manufacturing technology. For the other
side of the problem conventional methodologies for geometry representation of
CAD systems are described and their limitations with regard to AM are worked out.
Finally a voxel based geometry representation is presented as a solution for computer
aided geometry generation of high complex AM–structures.
author:
- first_name: T.
full_name: Reiher, T.
last_name: Reiher
- first_name: S.
full_name: Vogelsang, S.
last_name: Vogelsang
- first_name: R.
full_name: Koch, R.
last_name: Koch
citation:
ama: 'Reiher T, Vogelsang S, Koch R. Computer integration for geometry generation
for product optimization with Additive Manufacturing. In: 28th Annual International
Solid Freeform Fabrication Symposium. Vol 28. ; 2017:903-921. doi:http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/ComputerIntegrationforGeometryGenerationforP.pdf'
apa: Reiher, T., Vogelsang, S., & Koch, R. (2017). Computer integration for
geometry generation for product optimization with Additive Manufacturing. In 28th
Annual International Solid Freeform Fabrication Symposium (Vol. 28, pp. 903–921).
http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/ComputerIntegrationforGeometryGenerationforP.pdf
bibtex: '@inproceedings{Reiher_Vogelsang_Koch_2017, title={Computer integration
for geometry generation for product optimization with Additive Manufacturing},
volume={28}, DOI={http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/ComputerIntegrationforGeometryGenerationforP.pdf},
booktitle={28th Annual International Solid Freeform Fabrication Symposium}, author={Reiher,
T. and Vogelsang, S. and Koch, R.}, year={2017}, pages={903–921} }'
chicago: Reiher, T., S. Vogelsang, and R. Koch. “Computer Integration for Geometry
Generation for Product Optimization with Additive Manufacturing.” In 28th Annual
International Solid Freeform Fabrication Symposium, 28:903–21, 2017. http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/ComputerIntegrationforGeometryGenerationforP.pdf.
ieee: T. Reiher, S. Vogelsang, and R. Koch, “Computer integration for geometry generation
for product optimization with Additive Manufacturing,” in 28th Annual International
Solid Freeform Fabrication Symposium, 2017, vol. 28, pp. 903–921.
mla: Reiher, T., et al. “Computer Integration for Geometry Generation for Product
Optimization with Additive Manufacturing.” 28th Annual International Solid
Freeform Fabrication Symposium, vol. 28, 2017, pp. 903–21, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/ComputerIntegrationforGeometryGenerationforP.pdf.
short: 'T. Reiher, S. Vogelsang, R. Koch, in: 28th Annual International Solid Freeform
Fabrication Symposium, 2017, pp. 903–921.'
date_created: 2021-04-21T07:32:06Z
date_updated: 2022-01-06T06:55:10Z
department:
- _id: '144'
- _id: '219'
- _id: '624'
doi: http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/ComputerIntegrationforGeometryGenerationforP.pdf
intvolume: ' 28'
language:
- iso: eng
page: 903-921
publication: 28th Annual International Solid Freeform Fabrication Symposium
status: public
title: Computer integration for geometry generation for product optimization with
Additive Manufacturing
type: conference
user_id: '55833'
volume: 28
year: '2017'
...
---
_id: '21695'
abstract:
- lang: eng
text: Designing parts for additive manufacturing (AM) offers a broad range of geometrical
and functional potentials. On the one hand the manufacturingtechnology offers
the possibility of manufacturing highly complex freeform shapes, often referred
to as bionic shapes. By use of these, perfect force fluxes without stress risings
due to imperfect notches are realizable, getting the most value of used material.
On the other hand these complex structures require a reliable geometry representation
in compatible CAD-files. Conventional CAD systems were developed to generate geometries
that are manufacturable with conventional machining. These are not capable of
representing the high complex designs for AM. Especially for geometries generated
by CAE like from topology optimization the conventional CAD systems fail to take
advantage of the combination of CAE and AM. This paper explains why there is a
lack of compatibility of well-known CAD systems with the potentials of AM. Therefore
the AM-side of the problem is described by showing some potentials of AM and the
need of high complex structures for this manufacturing technology. For the other
side of the problem conventional methodologies for geometry representation of
CAD systems are described and their limitations with regard to AM are worked out.
Finally a voxel based geometry representation is presented as a solution for computer
aided geometry generation of high complex AM–structures.
author:
- first_name: T.
full_name: Reiher, T.
last_name: Reiher
- first_name: S.
full_name: Vogelsang, S.
last_name: Vogelsang
- first_name: R.
full_name: Koch, R.
last_name: Koch
citation:
ama: 'Reiher T, Vogelsang S, Koch R. Computer integration for geometry generation
for product optimization with Additive Manufacturing. In: 28th Annual International
Solid Freeform Fabrication Symposium. Vol 28. ; 2017:903-921. doi:http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/ComputerIntegrationforGeometryGenerationforP.pdf'
apa: Reiher, T., Vogelsang, S., & Koch, R. (2017). Computer integration for
geometry generation for product optimization with Additive Manufacturing. In 28th
Annual International Solid Freeform Fabrication Symposium (Vol. 28, pp. 903–921).
http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/ComputerIntegrationforGeometryGenerationforP.pdf
bibtex: '@inproceedings{Reiher_Vogelsang_Koch_2017, title={Computer integration
for geometry generation for product optimization with Additive Manufacturing},
volume={28}, DOI={http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/ComputerIntegrationforGeometryGenerationforP.pdf},
booktitle={28th Annual International Solid Freeform Fabrication Symposium}, author={Reiher,
T. and Vogelsang, S. and Koch, R.}, year={2017}, pages={903–921} }'
chicago: Reiher, T., S. Vogelsang, and R. Koch. “Computer Integration for Geometry
Generation for Product Optimization with Additive Manufacturing.” In 28th Annual
International Solid Freeform Fabrication Symposium, 28:903–21, 2017. http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/ComputerIntegrationforGeometryGenerationforP.pdf.
ieee: T. Reiher, S. Vogelsang, and R. Koch, “Computer integration for geometry generation
for product optimization with Additive Manufacturing,” in 28th Annual International
Solid Freeform Fabrication Symposium, 2017, vol. 28, pp. 903–921.
mla: Reiher, T., et al. “Computer Integration for Geometry Generation for Product
Optimization with Additive Manufacturing.” 28th Annual International Solid
Freeform Fabrication Symposium, vol. 28, 2017, pp. 903–21, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/ComputerIntegrationforGeometryGenerationforP.pdf.
short: 'T. Reiher, S. Vogelsang, R. Koch, in: 28th Annual International Solid Freeform
Fabrication Symposium, 2017, pp. 903–921.'
date_created: 2021-04-21T07:38:05Z
date_updated: 2022-01-06T06:55:10Z
department:
- _id: '144'
- _id: '219'
- _id: '624'
doi: http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/ComputerIntegrationforGeometryGenerationforP.pdf
intvolume: ' 28'
language:
- iso: eng
page: 903-921
publication: 28th Annual International Solid Freeform Fabrication Symposium
status: public
title: Computer integration for geometry generation for product optimization with
Additive Manufacturing
type: conference
user_id: '55833'
volume: 28
year: '2017'
...
---
_id: '21704'
abstract:
- lang: eng
text: Even in times where additive manufacturing has a peak in media and industry
interest, only few companies have already implemented this technology. Many companies
struggle with the use of AM even if they have already identified the benefits
of this technology for their business. Additional knowledge along the whole product
development chain is necessary to succeed in implementing this technology. As
all other production technologies, AM has certain strength and weaknesses which
affect the suitable part candidates. Redesign or manufacturing approaches of unsuited
part candidates are no very likely to be successful. In general, aspects like
design rules need to be known along the product development process in order to
achieve technology-based benefits during production and post-processing resulting
in economic success. This paper will present a holistic approach which will assist
the designer during product development and manufacturing based on an example
part from the space industry. Then methodology starts with an appropriate part
selection as a key parameter for the product development process. Based on the
promising part candidates, deductions for the further product development process
will be described. This includes approaches for functional integration as well
as a methodology for the compilation of part requirements. Those are utilized
for a black box methodology, ensuring a time-efficient redesign based on FEA optimization
and design rules for additive manufacturing. Best practices for integrating (or
in the best case avoiding) traditional technologies are discussed. Based on this,
the development of industrialization and test and verification plans for production
are shown. This includes the marking of parts for traceability during the whole
product lifecycle for quality reasons as well as for product protection. Furthermore,
production and production planning are discussed. This is followed by post-processing
and testing procedures of the part. The paper will close with a detailed economic
view on the topic and some deductions regarding the changes in the supply chain.
The methodology itself is discussed and explained on a real sample metal part.
The general methodology is discussed on the basis of the space industry but is
subject to be adapted to other industries.
author:
- first_name: T.
full_name: Reiher, T.
last_name: Reiher
- first_name: C.
full_name: Lindemann, C.
last_name: Lindemann
- first_name: U.
full_name: Jahnke, U.
last_name: Jahnke
- first_name: G.
full_name: Deppe, G.
last_name: Deppe
- first_name: R.
full_name: Koch, R.
last_name: Koch
citation:
ama: Reiher T, Lindemann C, Jahnke U, Deppe G, Koch R. Holistic approach for industrializing
AM technology - from part selection to test and verification. Progress in Additive
Manufacturing. 2017;2:43-55. doi:https://doi.org/10.1007/s40964-017-0018-y
apa: Reiher, T., Lindemann, C., Jahnke, U., Deppe, G., & Koch, R. (2017). Holistic
approach for industrializing AM technology - from part selection to test and verification.
Progress in Additive Manufacturing, 2, 43–55. https://doi.org/10.1007/s40964-017-0018-y
bibtex: '@article{Reiher_Lindemann_Jahnke_Deppe_Koch_2017, title={Holistic approach
for industrializing AM technology - from part selection to test and verification},
volume={2}, DOI={https://doi.org/10.1007/s40964-017-0018-y},
journal={Progress in Additive Manufacturing}, publisher={Springer}, author={Reiher,
T. and Lindemann, C. and Jahnke, U. and Deppe, G. and Koch, R.}, year={2017},
pages={43–55} }'
chicago: 'Reiher, T., C. Lindemann, U. Jahnke, G. Deppe, and R. Koch. “Holistic
Approach for Industrializing AM Technology - from Part Selection to Test and Verification.”
Progress in Additive Manufacturing 2 (2017): 43–55. https://doi.org/10.1007/s40964-017-0018-y.'
ieee: T. Reiher, C. Lindemann, U. Jahnke, G. Deppe, and R. Koch, “Holistic approach
for industrializing AM technology - from part selection to test and verification,”
Progress in Additive Manufacturing, vol. 2, pp. 43–55, 2017.
mla: Reiher, T., et al. “Holistic Approach for Industrializing AM Technology - from
Part Selection to Test and Verification.” Progress in Additive Manufacturing,
vol. 2, Springer, 2017, pp. 43–55, doi:https://doi.org/10.1007/s40964-017-0018-y.
short: T. Reiher, C. Lindemann, U. Jahnke, G. Deppe, R. Koch, Progress in Additive
Manufacturing 2 (2017) 43–55.
date_created: 2021-04-21T07:45:01Z
date_updated: 2022-01-06T06:55:11Z
department:
- _id: '144'
- _id: '219'
- _id: '624'
doi: https://doi.org/10.1007/s40964-017-0018-y
intvolume: ' 2'
language:
- iso: eng
page: 43-55
publication: Progress in Additive Manufacturing
publication_identifier:
isbn:
- 2363-9520
publisher: Springer
status: public
title: Holistic approach for industrializing AM technology - from part selection to
test and verification
type: journal_article
user_id: '55833'
volume: 2
year: '2017'
...
---
_id: '58'
abstract:
- lang: eng
text: Network function virtualization and software-defined networking allow services
consisting of virtual network functions to be designed and implemented with great
flexibility by facilitating automatic deployments, migrations, and reconfigurations
for services and their components. For extended flexibility, we go beyond seeing
services as a fixed chain of functions. We define the service structure in a flexible
way that enables changing the order of functions in case the functionality of
the service is not influenced by this, and propose a YANG data model for expressing
this flexibility. Flexible structures allow the network orchestration system to
choose the optimal composition of service components that for example gives the
best results for placement of services in the network. When number of flexible
services and number of components in each service increase, combinatorial explosion
limits the practical use of this flexibility. In this paper, we describe a selection
heuristic that gives a Pareto set of the possible compositions of a service as
well as possible combinations of different services, with respect to different
optimization objectives. Moreover, we present a heuristic algorithm for placement
of a combination of services, which aims at placing service components along shortest
paths that have enough capacity for accommodating the services. By applying these
solutions, we show that allowing flexibility in the service structure is feasible.
author:
- first_name: Sevil
full_name: Dräxler, Sevil
id: '31764'
last_name: Dräxler
- first_name: Holger
full_name: Karl, Holger
id: '126'
last_name: Karl
citation:
ama: Dräxler S, Karl H. Specification, Composition, and Placement of Network Services
with Flexible Structures. International Journal of Network Management.
2017;(2):1--16. doi:10.1002/nem.1963
apa: Dräxler, S., & Karl, H. (2017). Specification, Composition, and Placement
of Network Services with Flexible Structures. International Journal of Network
Management, (2), 1--16. https://doi.org/10.1002/nem.1963
bibtex: '@article{Dräxler_Karl_2017, title={Specification, Composition, and Placement
of Network Services with Flexible Structures}, DOI={10.1002/nem.1963},
number={2}, journal={International Journal of Network Management}, publisher={Wiley
Online Library}, author={Dräxler, Sevil and Karl, Holger}, year={2017}, pages={1--16}
}'
chicago: 'Dräxler, Sevil, and Holger Karl. “Specification, Composition, and Placement
of Network Services with Flexible Structures.” International Journal of Network
Management, no. 2 (2017): 1--16. https://doi.org/10.1002/nem.1963.'
ieee: S. Dräxler and H. Karl, “Specification, Composition, and Placement of Network
Services with Flexible Structures,” International Journal of Network Management,
no. 2, pp. 1--16, 2017.
mla: Dräxler, Sevil, and Holger Karl. “Specification, Composition, and Placement
of Network Services with Flexible Structures.” International Journal of Network
Management, no. 2, Wiley Online Library, 2017, pp. 1--16, doi:10.1002/nem.1963.
short: S. Dräxler, H. Karl, International Journal of Network Management (2017) 1--16.
date_created: 2017-10-17T12:41:02Z
date_updated: 2022-01-06T07:02:42Z
ddc:
- '040'
department:
- _id: '75'
doi: 10.1002/nem.1963
file:
- access_level: open_access
content_type: application/pdf
creator: florida
date_created: 2018-03-21T13:18:13Z
date_updated: 2018-06-13T09:15:42Z
file_id: '1579'
file_name: 58-preprint-ijnm.pdf
file_size: 2765738
relation: hidden
- access_level: open_access
content_type: application/pdf
creator: sevilmeh
date_created: 2018-06-13T09:22:37Z
date_updated: 2018-06-13T09:22:37Z
file_id: '3197'
file_name: 58-accepted-ijnm.pdf
file_size: 2766920
relation: main_file
file_date_updated: 2018-06-13T09:22:37Z
has_accepted_license: '1'
issue: '2'
oa: '1'
page: 1--16
project:
- _id: '1'
name: SFB 901
- _id: '16'
name: SFB 901 - Subprojekt C4
- _id: '4'
name: SFB 901 - Project Area C
- _id: '25'
call_identifier: 5G PPP Phase 1
grant_number: '671517'
name: 'SONATA NFV: Agile Service Development and Orchestration in 5G Virtualized
Networks'
publication: International Journal of Network Management
publisher: Wiley Online Library
status: public
title: Specification, Composition, and Placement of Network Services with Flexible
Structures
type: journal_article
urn: '582'
user_id: '477'
year: '2017'
...
---
_id: '5914'
abstract:
- lang: eng
text: During the last years, alternative drive technologies, for example electrically
powered vehicles (EV), have gained more and more attention, mainly caused by an
increasing awareness of the impact of CO2 emissions on climate change and by the
limitation of fossil fuels. However, these technologies currently come with new
challenges due to limited lithium ion battery storage density and high battery
costs which lead to a considerably reduced range in comparison to conventional
internal combustion engine powered vehicles. For this reason, it is desirable
to increase the vehicle range without enlarging the battery. When the route and
the road slope are known in advance, it is possible to vary the vehicles velocity
within certain limits in order to reduce the overall drivetrain energy consumption.
This may either result in an increased range or, alternatively, in larger energy
reserves for comfort functions such as air conditioning. In this presentation,
we formulate the challenge of range extension as a multiobjective optimal control
problem. We then apply different numerical methods to calculate the so-called
Pareto set of optimal compromises for the drivetrain power profile with respect
to the two concurrent objectives battery state of charge and mean velocity. In
order to numerically solve the optimal control problem by means of a direct method,
a time discretization of the drivetrain power profile is necessary. In combination
with a vehicle dynamics simulation model, the optimal control problem is transformed
into a high dimensional nonlinear optimization problem. For the approximation
of the Pareto set, two different optimization algorithms implemented in the software
package GAIO are used. The first one yields a global optimal solution by applying
a set-oriented subdivision technique to parameter space. By construction, this
technique is limited to coarse discretizations of the drivetrain power profile.
In contrast, the second technique, which is based on an image space continuation
method, is more suitable when the number of parameters is large while the number
of objectives is less than five. We compare the solutions of the two algorithms
and study the influence of different discretizations on the quality of the solutions.
A MATLAB/Simulink model is used to describe the dynamics of an EV. It is based
on a drivetrain efficiency map and considers vehicle properties such as rolling
friction and air drag, as well as environmental conditions like slope and ambient
temperature. The vehicle model takes into account the traction battery too, enabling
an exact prediction of the batterys response to power requests of drivetrain and
auxiliary loads, including state of charge.
author:
- first_name: Michael
full_name: Dellnitz, Michael
last_name: Dellnitz
- first_name: Julian
full_name: Eckstein, Julian
last_name: Eckstein
- first_name: Kathrin
full_name: Flaßkamp, Kathrin
last_name: Flaßkamp
- first_name: Patrick
full_name: Friedel, Patrick
last_name: Friedel
- first_name: Christian
full_name: Horenkamp, Christian
last_name: Horenkamp
- first_name: Ulrich
full_name: Köhler, Ulrich
last_name: Köhler
- first_name: Sina
full_name: Ober-Blöbaum, Sina
id: '16494'
last_name: Ober-Blöbaum
- first_name: Sebastian
full_name: Peitz, Sebastian
id: '47427'
last_name: Peitz
orcid: https://orcid.org/0000-0002-3389-793X
- first_name: Sebastian
full_name: Tiemeyer, Sebastian
last_name: Tiemeyer
citation:
ama: 'Dellnitz M, Eckstein J, Flaßkamp K, et al. Multiobjective Optimal Control
Methods for the Development of an Intelligent Cruise Control. In: Progress
in Industrial Mathematics at ECMI 2014 . Cham: Springer International Publishing;
2017:633-641. doi:10.1007/978-3-319-23413-7_87'
apa: 'Dellnitz, M., Eckstein, J., Flaßkamp, K., Friedel, P., Horenkamp, C., Köhler,
U., … Tiemeyer, S. (2017). Multiobjective Optimal Control Methods for the Development
of an Intelligent Cruise Control. In Progress in Industrial Mathematics at
ECMI 2014 (pp. 633–641). Cham: Springer International Publishing. https://doi.org/10.1007/978-3-319-23413-7_87'
bibtex: '@inproceedings{Dellnitz_Eckstein_Flaßkamp_Friedel_Horenkamp_Köhler_Ober-Blöbaum_Peitz_Tiemeyer_2017,
place={Cham}, title={Multiobjective Optimal Control Methods for the Development
of an Intelligent Cruise Control}, DOI={10.1007/978-3-319-23413-7_87},
booktitle={Progress in Industrial Mathematics at ECMI 2014 }, publisher={Springer
International Publishing}, author={Dellnitz, Michael and Eckstein, Julian and
Flaßkamp, Kathrin and Friedel, Patrick and Horenkamp, Christian and Köhler, Ulrich
and Ober-Blöbaum, Sina and Peitz, Sebastian and Tiemeyer, Sebastian}, year={2017},
pages={633–641} }'
chicago: 'Dellnitz, Michael, Julian Eckstein, Kathrin Flaßkamp, Patrick Friedel,
Christian Horenkamp, Ulrich Köhler, Sina Ober-Blöbaum, Sebastian Peitz, and Sebastian
Tiemeyer. “Multiobjective Optimal Control Methods for the Development of an Intelligent
Cruise Control.” In Progress in Industrial Mathematics at ECMI 2014 , 633–41.
Cham: Springer International Publishing, 2017. https://doi.org/10.1007/978-3-319-23413-7_87.'
ieee: M. Dellnitz et al., “Multiobjective Optimal Control Methods for the
Development of an Intelligent Cruise Control,” in Progress in Industrial Mathematics
at ECMI 2014 , 2017, pp. 633–641.
mla: Dellnitz, Michael, et al. “Multiobjective Optimal Control Methods for the Development
of an Intelligent Cruise Control.” Progress in Industrial Mathematics at ECMI
2014 , Springer International Publishing, 2017, pp. 633–41, doi:10.1007/978-3-319-23413-7_87.
short: 'M. Dellnitz, J. Eckstein, K. Flaßkamp, P. Friedel, C. Horenkamp, U. Köhler,
S. Ober-Blöbaum, S. Peitz, S. Tiemeyer, in: Progress in Industrial Mathematics
at ECMI 2014 , Springer International Publishing, Cham, 2017, pp. 633–641.'
date_created: 2018-11-27T14:46:52Z
date_updated: 2022-01-06T07:02:47Z
doi: 10.1007/978-3-319-23413-7_87
language:
- iso: eng
page: 633-641
place: Cham
project:
- _id: '52'
name: Computing Resources Provided by the Paderborn Center for Parallel Computing
publication: 'Progress in Industrial Mathematics at ECMI 2014 '
publication_identifier:
isbn:
- '9783319234120'
- '9783319234137'
issn:
- 1612-3956
- 2198-3283
publication_status: published
publisher: Springer International Publishing
status: public
title: Multiobjective Optimal Control Methods for the Development of an Intelligent
Cruise Control
type: conference
user_id: '47427'
year: '2017'
...
---
_id: '70'
author:
- first_name: Björn
full_name: Feldkord, Björn
id: '22704'
last_name: Feldkord
- first_name: Christine
full_name: Markarian, Christine
id: '37612'
last_name: Markarian
- first_name: Friedhelm
full_name: Meyer auf der Heide, Friedhelm
id: '15523'
last_name: Meyer auf der Heide
citation:
ama: 'Feldkord B, Markarian C, Meyer auf der Heide F. Price Fluctuations in Online
Leasing. In: Proceedings of the 11th Annual International Conference on Combinatorial
Optimization and Applications (COCOA). ; 2017:17-31. doi:10.1007/978-3-319-71147-8_2'
apa: Feldkord, B., Markarian, C., & Meyer auf der Heide, F. (2017). Price Fluctuations
in Online Leasing. In Proceedings of the 11th Annual International Conference
on Combinatorial Optimization and Applications (COCOA) (pp. 17–31). https://doi.org/10.1007/978-3-319-71147-8_2
bibtex: '@inproceedings{Feldkord_Markarian_Meyer auf der Heide_2017, title={Price
Fluctuations in Online Leasing}, DOI={10.1007/978-3-319-71147-8_2},
booktitle={Proceedings of the 11th Annual International Conference on Combinatorial
Optimization and Applications (COCOA)}, author={Feldkord, Björn and Markarian,
Christine and Meyer auf der Heide, Friedhelm}, year={2017}, pages={17–31} }'
chicago: Feldkord, Björn, Christine Markarian, and Friedhelm Meyer auf der Heide.
“Price Fluctuations in Online Leasing.” In Proceedings of the 11th Annual International
Conference on Combinatorial Optimization and Applications (COCOA), 17–31,
2017. https://doi.org/10.1007/978-3-319-71147-8_2.
ieee: B. Feldkord, C. Markarian, and F. Meyer auf der Heide, “Price Fluctuations
in Online Leasing,” in Proceedings of the 11th Annual International Conference
on Combinatorial Optimization and Applications (COCOA), 2017, pp. 17–31.
mla: Feldkord, Björn, et al. “Price Fluctuations in Online Leasing.” Proceedings
of the 11th Annual International Conference on Combinatorial Optimization and
Applications (COCOA), 2017, pp. 17–31, doi:10.1007/978-3-319-71147-8_2.
short: 'B. Feldkord, C. Markarian, F. Meyer auf der Heide, in: Proceedings of the
11th Annual International Conference on Combinatorial Optimization and Applications
(COCOA), 2017, pp. 17–31.'
date_created: 2017-10-17T12:41:05Z
date_updated: 2022-01-06T07:03:26Z
ddc:
- '000'
department:
- _id: '63'
doi: 10.1007/978-3-319-71147-8_2
file:
- access_level: closed
content_type: application/pdf
creator: ups
date_created: 2018-11-02T15:06:13Z
date_updated: 2018-11-02T15:06:13Z
file_id: '5293'
file_name: PriceFluctuationInOnlineLeasin.pdf
file_size: 287315
relation: main_file
success: 1
file_date_updated: 2018-11-02T15:06:13Z
has_accepted_license: '1'
language:
- iso: eng
page: 17 - 31
project:
- _id: '1'
name: SFB 901
- _id: '5'
name: SFB 901 - Subprojekt A1
- _id: '2'
name: SFB 901 - Project Area A
publication: Proceedings of the 11th Annual International Conference on Combinatorial
Optimization and Applications (COCOA)
status: public
title: Price Fluctuations in Online Leasing
type: conference
user_id: '477'
year: '2017'
...
---
_id: '706'
author:
- first_name: Alexander
full_name: Mäcker, Alexander
id: '13536'
last_name: Mäcker
- first_name: Manuel
full_name: Malatyali, Manuel
last_name: Malatyali
- first_name: Friedhelm
full_name: Meyer auf der Heide, Friedhelm
id: '15523'
last_name: Meyer auf der Heide
- first_name: Sören
full_name: Riechers, Sören
last_name: Riechers
citation:
ama: Mäcker A, Malatyali M, Meyer auf der Heide F, Riechers S. Cost-efficient Scheduling
on Machines from the Cloud. Journal of Combinatorial Optimization. 2017;36(4):1168-1194.
doi:10.1007/s10878-017-0198-x
apa: Mäcker, A., Malatyali, M., Meyer auf der Heide, F., & Riechers, S. (2017).
Cost-efficient Scheduling on Machines from the Cloud. Journal of Combinatorial
Optimization, 36(4), 1168–1194. https://doi.org/10.1007/s10878-017-0198-x
bibtex: '@article{Mäcker_Malatyali_Meyer auf der Heide_Riechers_2017, title={Cost-efficient
Scheduling on Machines from the Cloud}, volume={36}, DOI={10.1007/s10878-017-0198-x},
number={4}, journal={Journal of Combinatorial Optimization}, publisher={Springer},
author={Mäcker, Alexander and Malatyali, Manuel and Meyer auf der Heide, Friedhelm
and Riechers, Sören}, year={2017}, pages={1168–1194} }'
chicago: 'Mäcker, Alexander, Manuel Malatyali, Friedhelm Meyer auf der Heide, and
Sören Riechers. “Cost-Efficient Scheduling on Machines from the Cloud.” Journal
of Combinatorial Optimization 36, no. 4 (2017): 1168–94. https://doi.org/10.1007/s10878-017-0198-x.'
ieee: A. Mäcker, M. Malatyali, F. Meyer auf der Heide, and S. Riechers, “Cost-efficient
Scheduling on Machines from the Cloud,” Journal of Combinatorial Optimization,
vol. 36, no. 4, pp. 1168–1194, 2017.
mla: Mäcker, Alexander, et al. “Cost-Efficient Scheduling on Machines from the Cloud.”
Journal of Combinatorial Optimization, vol. 36, no. 4, Springer, 2017,
pp. 1168–94, doi:10.1007/s10878-017-0198-x.
short: A. Mäcker, M. Malatyali, F. Meyer auf der Heide, S. Riechers, Journal of
Combinatorial Optimization 36 (2017) 1168–1194.
date_created: 2017-11-15T10:21:34Z
date_updated: 2022-01-06T07:03:27Z
ddc:
- '040'
department:
- _id: '63'
doi: 10.1007/s10878-017-0198-x
file:
- access_level: closed
content_type: application/pdf
creator: florida
date_created: 2018-03-14T12:21:34Z
date_updated: 2018-03-14T12:21:34Z
file_id: '1210'
file_name: 706-chp_3A10.1007_2F978-3-319-48749-6_42.pdf
file_size: 608614
relation: main_file
success: 1
file_date_updated: 2018-03-14T12:21:34Z
has_accepted_license: '1'
intvolume: ' 36'
issue: '4'
language:
- iso: eng
page: 1168-1194
project:
- _id: '1'
name: SFB 901
- _id: '16'
name: SFB 901 - Subprojekt C4
- _id: '4'
name: SFB 901 - Project Area C
publication: Journal of Combinatorial Optimization
publisher: Springer
status: public
title: Cost-efficient Scheduling on Machines from the Cloud
type: journal_article
user_id: '15415'
volume: 36
year: '2017'
...
---
_id: '87'
abstract:
- lang: eng
text: Management of complex network services requires flexible and efficient service
provisioning as well as optimized handling of continuous changes in the workload
of the service.To adapt to changes in the demand, service components need to be
replicated (scaling) and allocated to physical resources (placement) dynamically.
In this paper, we propose a fullyautomated approach to the joint optimization
problem of scaling and placement, enabling quick reaction to changes. We formalize
the problem, analyze its complexity, and develop two algorithms to solve it. Extensive
empirical results show the applicability andeffectiveness of the proposed approach.
author:
- first_name: Sevil
full_name: Dräxler, Sevil
id: '31764'
last_name: Dräxler
- first_name: Holger
full_name: Karl, Holger
id: '126'
last_name: Karl
- first_name: Zoltan Adam
full_name: Mann, Zoltan Adam
last_name: Mann
citation:
ama: 'Dräxler S, Karl H, Mann ZA. Joint Optimization of Scaling and Placement of
Virtual Network Services. In: Proceedings of the 17th IEEE/ACM International
Symposium on Cluster, Cloud and Grid Computing (CCGrid 2017). ; 2017. doi:10.1109/CCGRID.2017.25'
apa: Dräxler, S., Karl, H., & Mann, Z. A. (2017). Joint Optimization of Scaling
and Placement of Virtual Network Services. In Proceedings of the 17th IEEE/ACM
International Symposium on Cluster, Cloud and Grid Computing (CCGrid 2017).
https://doi.org/10.1109/CCGRID.2017.25
bibtex: '@inproceedings{Dräxler_Karl_Mann_2017, title={Joint Optimization of Scaling
and Placement of Virtual Network Services}, DOI={10.1109/CCGRID.2017.25},
booktitle={Proceedings of the 17th IEEE/ACM International Symposium on Cluster,
Cloud and Grid Computing (CCGrid 2017)}, author={Dräxler, Sevil and Karl, Holger
and Mann, Zoltan Adam}, year={2017} }'
chicago: Dräxler, Sevil, Holger Karl, and Zoltan Adam Mann. “Joint Optimization
of Scaling and Placement of Virtual Network Services.” In Proceedings of the
17th IEEE/ACM International Symposium on Cluster, Cloud and Grid Computing (CCGrid
2017), 2017. https://doi.org/10.1109/CCGRID.2017.25.
ieee: S. Dräxler, H. Karl, and Z. A. Mann, “Joint Optimization of Scaling and Placement
of Virtual Network Services,” in Proceedings of the 17th IEEE/ACM International
Symposium on Cluster, Cloud and Grid Computing (CCGrid 2017), 2017.
mla: Dräxler, Sevil, et al. “Joint Optimization of Scaling and Placement of Virtual
Network Services.” Proceedings of the 17th IEEE/ACM International Symposium
on Cluster, Cloud and Grid Computing (CCGrid 2017), 2017, doi:10.1109/CCGRID.2017.25.
short: 'S. Dräxler, H. Karl, Z.A. Mann, in: Proceedings of the 17th IEEE/ACM International
Symposium on Cluster, Cloud and Grid Computing (CCGrid 2017), 2017.'
date_created: 2017-10-17T12:41:08Z
date_updated: 2022-01-06T07:03:59Z
ddc:
- '040'
department:
- _id: '75'
doi: 10.1109/CCGRID.2017.25
file:
- access_level: open_access
content_type: application/pdf
creator: sevilmeh
date_created: 2018-06-25T08:07:43Z
date_updated: 2018-06-25T08:07:43Z
file_id: '3324'
file_name: RIS.pdf
file_size: 2229109
relation: main_file
file_date_updated: 2018-06-25T08:07:43Z
has_accepted_license: '1'
oa: '1'
project:
- _id: '1'
name: SFB 901
- _id: '16'
name: SFB 901 - Subprojekt C4
- _id: '4'
name: SFB 901 - Project Area C
- _id: '25'
call_identifier: 5G PPP Phase 1
grant_number: '671517'
name: 'SONATA NFV: Agile Service Development and Orchestration in 5G Virtualized
Networks'
publication: Proceedings of the 17th IEEE/ACM International Symposium on Cluster,
Cloud and Grid Computing (CCGrid 2017)
status: public
title: Joint Optimization of Scaling and Placement of Virtual Network Services
type: conference
urn: '873'
user_id: '31764'
year: '2017'
...
---
_id: '8752'
abstract:
- lang: eng
text: In this article we develop a gradient-based algorithm for the solution of
multiobjective optimization problems with uncertainties. To this end, an additional
condition is derived for the descent direction in order to account for inaccuracies
in the gradients and then incorporated into a subdivision algorithm for the computation
of global solutions to multiobjective optimization problems. Convergence to a
superset of the Pareto set is proved and an upper bound for the maximal distance
to the set of substationary points is given. Besides the applicability to problems
with uncertainties, the algorithm is developed with the intention to use it in
combination with model order reduction techniques in order to efficiently solve
PDE-constrained multiobjective optimization problems.
author:
- first_name: Sebastian
full_name: Peitz, Sebastian
id: '47427'
last_name: Peitz
orcid: https://orcid.org/0000-0002-3389-793X
- first_name: Michael
full_name: Dellnitz, Michael
last_name: Dellnitz
citation:
ama: 'Peitz S, Dellnitz M. Gradient-Based Multiobjective Optimization with Uncertainties.
In: NEO 2016. Cham; 2017:159-182. doi:10.1007/978-3-319-64063-1_7'
apa: Peitz, S., & Dellnitz, M. (2017). Gradient-Based Multiobjective Optimization
with Uncertainties. In NEO 2016 (pp. 159–182). Cham. https://doi.org/10.1007/978-3-319-64063-1_7
bibtex: '@inproceedings{Peitz_Dellnitz_2017, place={Cham}, title={Gradient-Based
Multiobjective Optimization with Uncertainties}, DOI={10.1007/978-3-319-64063-1_7},
booktitle={NEO 2016}, author={Peitz, Sebastian and Dellnitz, Michael}, year={2017},
pages={159–182} }'
chicago: Peitz, Sebastian, and Michael Dellnitz. “Gradient-Based Multiobjective
Optimization with Uncertainties.” In NEO 2016, 159–82. Cham, 2017. https://doi.org/10.1007/978-3-319-64063-1_7.
ieee: S. Peitz and M. Dellnitz, “Gradient-Based Multiobjective Optimization with
Uncertainties,” in NEO 2016, 2017, pp. 159–182.
mla: Peitz, Sebastian, and Michael Dellnitz. “Gradient-Based Multiobjective Optimization
with Uncertainties.” NEO 2016, 2017, pp. 159–82, doi:10.1007/978-3-319-64063-1_7.
short: 'S. Peitz, M. Dellnitz, in: NEO 2016, Cham, 2017, pp. 159–182.'
date_created: 2019-03-29T13:28:56Z
date_updated: 2022-01-06T07:04:00Z
department:
- _id: '101'
doi: 10.1007/978-3-319-64063-1_7
language:
- iso: eng
page: 159-182
place: Cham
project:
- _id: '52'
name: Computing Resources Provided by the Paderborn Center for Parallel Computing
publication: NEO 2016
publication_identifier:
isbn:
- '9783319640624'
- '9783319640631'
issn:
- 1860-949X
- 1860-9503
publication_status: published
status: public
title: Gradient-Based Multiobjective Optimization with Uncertainties
type: conference
user_id: '47427'
year: '2017'
...
---
_id: '983'
author:
- first_name: Sébastien
full_name: Auroux, Sébastien
id: '42575'
last_name: Auroux
- first_name: S.
full_name: Scholz, S.
last_name: Scholz
- first_name: Holger
full_name: Karl, Holger
id: '126'
last_name: Karl
citation:
ama: 'Auroux S, Scholz S, Karl H. Assessing Genetic Algorithms for Placing Flow
Processing-aware Control Applications. In: Proc. European Wireless. ; 2017.'
apa: Auroux, S., Scholz, S., & Karl, H. (2017). Assessing Genetic Algorithms
for Placing Flow Processing-aware Control Applications. In Proc. European Wireless.
bibtex: '@inproceedings{Auroux_Scholz_Karl_2017, title={Assessing Genetic Algorithms
for Placing Flow Processing-aware Control Applications}, booktitle={Proc. European
Wireless}, author={Auroux, Sébastien and Scholz, S. and Karl, Holger}, year={2017}
}'
chicago: Auroux, Sébastien, S. Scholz, and Holger Karl. “Assessing Genetic Algorithms
for Placing Flow Processing-Aware Control Applications.” In Proc. European
Wireless, 2017.
ieee: S. Auroux, S. Scholz, and H. Karl, “Assessing Genetic Algorithms for Placing
Flow Processing-aware Control Applications,” in Proc. European Wireless,
2017.
mla: Auroux, Sébastien, et al. “Assessing Genetic Algorithms for Placing Flow Processing-Aware
Control Applications.” Proc. European Wireless, 2017.
short: 'S. Auroux, S. Scholz, H. Karl, in: Proc. European Wireless, 2017.'
date_created: 2017-11-27T10:22:29Z
date_updated: 2019-01-03T13:18:55Z
ddc:
- '004'
department:
- _id: '75'
ec_funded: '1'
main_file_link:
- url: http://ieeexplore.ieee.org/document/8011315/
project:
- _id: '22'
call_identifier: FP7-ICT-2011-C
grant_number: '318115'
name: Connectivity management for eneRgy Optimised Wireless Dense works
publication: Proc. European Wireless
status: public
title: Assessing Genetic Algorithms for Placing Flow Processing-aware Control Applications
type: conference
user_id: '126'
year: '2017'
...
---
_id: '9862'
abstract:
- lang: eng
text: 'In order to improve the credibility of modern simulation tools, uncertainties
of different kinds have to be considered. This work is focused on epistemic uncertainties
in the framework of continuum mechanics, which are taken into account by fuzzy
analysis. The underlying min-max optimization problem of the extension principle
is approximated by α-discretization, resulting in a separation of minimum and
maximum problems. To become more universal, so-called quantities of interest are
employed, which allow a general formulation for the target problem of interest.
In this way, the relation to parameter identification problems based on least-squares
functions is highlighted. The solutions of the related optimization problems with
simple constraints are obtained with a gradient-based scheme, which is derived
from a sensitvity analysis for the target problem by means of a variational formulation.
Two numerical examples for the fuzzy analysis of material parameters are concerned
with a necking problem at large strain elastoplasticity and a perforated strip
at large strain hyperelasticity to demonstrate the versatility of the proposed
variational formulation. '
author:
- first_name: Rolf
full_name: Mahnken, Rolf
last_name: Mahnken
citation:
ama: Mahnken R. “A variational formulation for fuzzy analysis in continuum mechanics.”
Mathematics and Mechanics of complex systems. 2017;5(3-4).
apa: Mahnken, R. (2017). “A variational formulation for fuzzy analysis in continuum
mechanics.” Mathematics and Mechanics of Complex Systems, 5(3–4).
bibtex: '@article{Mahnken_2017, title={“A variational formulation for fuzzy analysis
in continuum mechanics”}, volume={5}, number={3–4}, journal={Mathematics and Mechanics
of complex systems}, author={Mahnken, Rolf}, year={2017} }'
chicago: Mahnken, Rolf. “‘A Variational Formulation for Fuzzy Analysis in Continuum
Mechanics.’” Mathematics and Mechanics of Complex Systems 5, no. 3–4 (2017).
ieee: R. Mahnken, “‘A variational formulation for fuzzy analysis in continuum mechanics,’”
Mathematics and Mechanics of complex systems, vol. 5, no. 3–4, 2017.
mla: Mahnken, Rolf. “‘A Variational Formulation for Fuzzy Analysis in Continuum
Mechanics.’” Mathematics and Mechanics of Complex Systems, vol. 5, no.
3–4, 2017.
short: R. Mahnken, Mathematics and Mechanics of Complex Systems 5 (2017).
date_created: 2019-05-20T11:36:47Z
date_updated: 2019-05-27T12:54:35Z
department:
- _id: '154'
intvolume: ' 5'
issue: 3-4
keyword:
- fuzzy analysis
- α-level optimization
- quantities of interest
- optimization with simple constraints
- large strain elasticity
- large strain elastoplasticity
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://msp.org/memocs/2017/5-3/memocs-v5-n3-p03-s.pdf
oa: '1'
publication: Mathematics and Mechanics of complex systems
publication_identifier:
issn:
- ' 2325-3444'
publication_status: published
status: public
title: '"A variational formulation for fuzzy analysis in continuum mechanics"'
type: journal_article
user_id: '78813'
volume: 5
year: '2017'
...
---
_id: '9976'
abstract:
- lang: eng
text: State-of-the-art mechatronic systems offer inherent intelligence that enables
them to autonomously adapt their behavior to current environmental conditions
and to their own system state. This autonomous behavior adaptation is made possible
by software in combination with complex sensor and actuator systems and by sophisticated
information processing, all of which make these systems increasingly complex.
This increasing complexity makes the design process a challenging task and brings
new complex possibilities for operation and maintenance. However, with the risk
of increased system complexity also comes the chance to adapt system behavior
based on current reliability, which in turn increases reliability. The development
of such an adaption strategy requires appropriate methods to evaluate reliability
based on currently selected system behavior. A common approach to implement such
adaptivity is to base system behavior on different working points that are obtained
using multiobjective optimization. During operation, selection among these allows
a changed operating strategy. To allow for multiobjective optimization, an accurate
system model including system reliability is required. This model is repeatedly
evaluated by the optimization algorithm. At present, modeling of system reliability
and synchronization of the models of behavior and reliability is a laborious manual
task and thus very error-prone. Since system behavior is crucial for system reliability,
an integrated model is introduced that integrates system behavior and system reliability.
The proposed approach is used to formulate reliability-related objective functions
for a clutch test rig that are used to compute feasible working points using multiobjective
optimization.
author:
- first_name: Thorben
full_name: Kaul, Thorben
id: '14802'
last_name: Kaul
- first_name: Tobias
full_name: Meyer, Tobias
last_name: Meyer
- first_name: Walter
full_name: Sextro, Walter
id: '21220'
last_name: Sextro
citation:
ama: Kaul T, Meyer T, Sextro W. Formulation of reliability-related objective functions
for design of intelligent mechatronic systems. SAGE Journals. 2017;Vol.
231(4):390-399. doi:10.1177/1748006X17709376
apa: Kaul, T., Meyer, T., & Sextro, W. (2017). Formulation of reliability-related
objective functions for design of intelligent mechatronic systems. SAGE Journals,
Vol. 231(4), 390–399. https://doi.org/10.1177/1748006X17709376
bibtex: '@article{Kaul_Meyer_Sextro_2017, title={Formulation of reliability-related
objective functions for design of intelligent mechatronic systems}, volume={Vol.
231(4)}, DOI={10.1177/1748006X17709376},
journal={SAGE Journals}, author={Kaul, Thorben and Meyer, Tobias and Sextro, Walter},
year={2017}, pages={390–399} }'
chicago: 'Kaul, Thorben, Tobias Meyer, and Walter Sextro. “Formulation of Reliability-Related
Objective Functions for Design of Intelligent Mechatronic Systems.” SAGE Journals
Vol. 231(4) (2017): 390–99. https://doi.org/10.1177/1748006X17709376.'
ieee: T. Kaul, T. Meyer, and W. Sextro, “Formulation of reliability-related objective
functions for design of intelligent mechatronic systems,” SAGE Journals,
vol. Vol. 231(4), pp. 390–399, 2017.
mla: Kaul, Thorben, et al. “Formulation of Reliability-Related Objective Functions
for Design of Intelligent Mechatronic Systems.” SAGE Journals, vol. Vol.
231(4), 2017, pp. 390–99, doi:10.1177/1748006X17709376.
short: T. Kaul, T. Meyer, W. Sextro, SAGE Journals Vol. 231(4) (2017) 390–399.
date_created: 2019-05-27T09:37:46Z
date_updated: 2019-09-16T10:20:49Z
department:
- _id: '151'
doi: 10.1177/1748006X17709376
keyword:
- Integrated model
- reliability
- system behavior
- Bayesian network
- multiobjective optimization
language:
- iso: eng
page: 390 - 399
publication: SAGE Journals
quality_controlled: '1'
status: public
title: Formulation of reliability-related objective functions for design of intelligent
mechatronic systems
type: journal_article
user_id: '55222'
volume: Vol. 231(4)
year: '2017'
...
---
_id: '9983'
author:
- first_name: Sebastian
full_name: Schulze, Sebastian
last_name: Schulze
- first_name: Walter
full_name: Sextro, Walter
id: '21220'
last_name: Sextro
- first_name: K.
full_name: Kister, K.
last_name: Kister
citation:
ama: 'Schulze S, Sextro W, Kister K. Model based optimization of dynamics in adaptive
headlamps. In: Proceedings of the 12th International Symposium on Automotive
Lighting 2017. ; 2017.'
apa: Schulze, S., Sextro, W., & Kister, K. (2017). Model based optimization
of dynamics in adaptive headlamps. In Proceedings of the 12th International
Symposium on Automotive Lighting 2017.
bibtex: '@inproceedings{Schulze_Sextro_Kister_2017, title={Model based optimization
of dynamics in adaptive headlamps}, booktitle={Proceedings of the 12th International
Symposium on Automotive Lighting 2017}, author={Schulze, Sebastian and Sextro,
Walter and Kister, K.}, year={2017} }'
chicago: Schulze, Sebastian, Walter Sextro, and K. Kister. “Model Based Optimization
of Dynamics in Adaptive Headlamps.” In Proceedings of the 12th International
Symposium on Automotive Lighting 2017, 2017.
ieee: S. Schulze, W. Sextro, and K. Kister, “Model based optimization of dynamics
in adaptive headlamps,” in Proceedings of the 12th International Symposium
on Automotive Lighting 2017, 2017.
mla: Schulze, Sebastian, et al. “Model Based Optimization of Dynamics in Adaptive
Headlamps.” Proceedings of the 12th International Symposium on Automotive Lighting
2017, 2017.
short: 'S. Schulze, W. Sextro, K. Kister, in: Proceedings of the 12th International
Symposium on Automotive Lighting 2017, 2017.'
date_created: 2019-05-27T09:50:09Z
date_updated: 2019-05-27T09:52:17Z
department:
- _id: '151'
language:
- iso: eng
publication: Proceedings of the 12th International Symposium on Automotive Lighting
2017
status: public
title: Model based optimization of dynamics in adaptive headlamps
type: conference
user_id: '55222'
year: '2017'
...
---
_id: '65'
abstract:
- lang: eng
text: Heterogeneous compute nodes in form of CPUs with attached GPU and FPGA accelerators
have strongly gained interested in the last years. Applications differ in their
execution characteristics and can therefore benefit from such heterogeneous resources
in terms of performance or energy consumption. While performance optimization
has been the only goal for a long time, nowadays research is more and more focusing
on techniques to minimize energy consumption due to rising electricity costs.This
paper presents reMinMin, a novel static list scheduling approach for optimizing
the total energy consumption for a set of tasks executed on a heterogeneous compute
node. reMinMin bases on a new energy model that differentiates between static
and dynamic energy components and covers effects of accelerator tasks on the host
CPU. The required energy values are retrieved by measurements on the real computing
system. In order to evaluate reMinMin, we compare it with two reference implementations
on three task sets with different degrees of heterogeneity. In our experiments,
MinMin is consistently better than a scheduler optimizing for dynamic energy only,
which requires up to 19.43% more energy, and very close to optimal schedules.
author:
- first_name: Achim
full_name: Lösch, Achim
id: '43646'
last_name: Lösch
- first_name: Marco
full_name: Platzner, Marco
id: '398'
last_name: Platzner
citation:
ama: 'Lösch A, Platzner M. reMinMin: A Novel Static Energy-Centric List Scheduling
Approach Based on Real Measurements. In: Proceedings of the 28th Annual IEEE
International Conference on Application-Specific Systems, Architectures and Processors
(ASAP). ; 2017. doi:10.1109/ASAP.2017.7995272'
apa: 'Lösch, A., & Platzner, M. (2017). reMinMin: A Novel Static Energy-Centric
List Scheduling Approach Based on Real Measurements. In Proceedings of the
28th Annual IEEE International Conference on Application-specific Systems, Architectures
and Processors (ASAP). https://doi.org/10.1109/ASAP.2017.7995272'
bibtex: '@inproceedings{Lösch_Platzner_2017, title={reMinMin: A Novel Static Energy-Centric
List Scheduling Approach Based on Real Measurements}, DOI={10.1109/ASAP.2017.7995272},
booktitle={Proceedings of the 28th Annual IEEE International Conference on Application-specific
Systems, Architectures and Processors (ASAP)}, author={Lösch, Achim and Platzner,
Marco}, year={2017} }'
chicago: 'Lösch, Achim, and Marco Platzner. “ReMinMin: A Novel Static Energy-Centric
List Scheduling Approach Based on Real Measurements.” In Proceedings of the
28th Annual IEEE International Conference on Application-Specific Systems, Architectures
and Processors (ASAP), 2017. https://doi.org/10.1109/ASAP.2017.7995272.'
ieee: 'A. Lösch and M. Platzner, “reMinMin: A Novel Static Energy-Centric List Scheduling
Approach Based on Real Measurements,” in Proceedings of the 28th Annual IEEE
International Conference on Application-specific Systems, Architectures and Processors
(ASAP), 2017.'
mla: 'Lösch, Achim, and Marco Platzner. “ReMinMin: A Novel Static Energy-Centric
List Scheduling Approach Based on Real Measurements.” Proceedings of the 28th
Annual IEEE International Conference on Application-Specific Systems, Architectures
and Processors (ASAP), 2017, doi:10.1109/ASAP.2017.7995272.'
short: 'A. Lösch, M. Platzner, in: Proceedings of the 28th Annual IEEE International
Conference on Application-Specific Systems, Architectures and Processors (ASAP),
2017.'
date_created: 2017-10-17T12:41:04Z
date_updated: 2022-01-06T07:03:08Z
ddc:
- '040'
department:
- _id: '78'
doi: 10.1109/ASAP.2017.7995272
file:
- access_level: closed
content_type: application/pdf
creator: aloesch
date_created: 2018-11-14T09:37:55Z
date_updated: 2018-11-14T09:37:55Z
file_id: '5550'
file_name: loesch_asap2017.pdf
file_size: 467545
relation: main_file
success: 1
file_date_updated: 2018-11-14T09:37:55Z
has_accepted_license: '1'
language:
- iso: eng
project:
- _id: '1'
name: SFB 901
- _id: '14'
name: SFB 901 - Subprojekt C2
- _id: '4'
name: SFB 901 - Project Area C
publication: Proceedings of the 28th Annual IEEE International Conference on Application-specific
Systems, Architectures and Processors (ASAP)
status: public
title: 'reMinMin: A Novel Static Energy-Centric List Scheduling Approach Based on
Real Measurements'
type: conference
user_id: '477'
year: '2017'
...
---
_id: '6565'
author:
- first_name: Axel
full_name: Jäger, Axel
last_name: Jäger
- first_name: Sarah
full_name: Johannesmann, Sarah
id: '29190'
last_name: Johannesmann
- first_name: Leander
full_name: Claes, Leander
id: '11829'
last_name: Claes
orcid: 0000-0002-4393-268X
- first_name: Manuel
full_name: Webersen, Manuel
id: '11289'
last_name: Webersen
orcid: 0000-0001-6411-4232
- first_name: Bernd
full_name: Henning, Bernd
id: '213'
last_name: Henning
- first_name: Mario
full_name: Kupnik, Mario
last_name: Kupnik
citation:
ama: 'Jäger A, Johannesmann S, Claes L, Webersen M, Henning B, Kupnik M. Evaluating
the Influence of 3D-Printing Parameters on Acoustic Material Properties. In: 2017
IEEE IUS~Proceedings. ; 2017.'
apa: Jäger, A., Johannesmann, S., Claes, L., Webersen, M., Henning, B., & Kupnik,
M. (2017). Evaluating the Influence of 3D-Printing Parameters on Acoustic Material
Properties. In 2017 IEEE IUS~Proceedings.
bibtex: '@inproceedings{Jäger_Johannesmann_Claes_Webersen_Henning_Kupnik_2017, title={Evaluating
the Influence of 3D-Printing Parameters on Acoustic Material Properties}, booktitle={2017
IEEE IUS~Proceedings}, author={Jäger, Axel and Johannesmann, Sarah and Claes,
Leander and Webersen, Manuel and Henning, Bernd and Kupnik, Mario}, year={2017}
}'
chicago: Jäger, Axel, Sarah Johannesmann, Leander Claes, Manuel Webersen, Bernd
Henning, and Mario Kupnik. “Evaluating the Influence of 3D-Printing Parameters
on Acoustic Material Properties.” In 2017 IEEE IUS~Proceedings, 2017.
ieee: A. Jäger, S. Johannesmann, L. Claes, M. Webersen, B. Henning, and M. Kupnik,
“Evaluating the Influence of 3D-Printing Parameters on Acoustic Material Properties,”
in 2017 IEEE IUS~Proceedings, 2017.
mla: Jäger, Axel, et al. “Evaluating the Influence of 3D-Printing Parameters on
Acoustic Material Properties.” 2017 IEEE IUS~Proceedings, 2017.
short: 'A. Jäger, S. Johannesmann, L. Claes, M. Webersen, B. Henning, M. Kupnik,
in: 2017 IEEE IUS~Proceedings, 2017.'
date_created: 2019-01-09T14:37:13Z
date_updated: 2022-01-06T07:03:12Z
department:
- _id: '49'
language:
- iso: eng
publication: 2017 IEEE IUS~Proceedings
status: public
title: Evaluating the Influence of 3D-Printing Parameters on Acoustic Material Properties
type: conference
user_id: '11829'
year: '2017'
...
---
_id: '6638'
author:
- first_name: Stefan
full_name: Krauter, Stefan
id: '28836'
last_name: Krauter
orcid: 0000-0002-3594-260X
citation:
ama: 'Krauter S. Comparison of Conversion Efficiencies and Energy Yields of Micro-Inverters
for Photovoltaic Modules. In: VDE-Proceedings of NEIS 2017 – Conference on
Sustainable Energy Supply and Energy Storage Systems by IEEE-PES. Hamburg (Deutschland),
21.–22. September, 2017. Hamburg; 2017.'
apa: Krauter, S. (2017). Comparison of Conversion Efficiencies and Energy Yields
of Micro-Inverters for Photovoltaic Modules. In VDE-Proceedings of NEIS 2017
– Conference on Sustainable Energy Supply and Energy Storage Systems by IEEE-PES.
Hamburg (Deutschland), 21.–22. September, 2017. Hamburg.
bibtex: '@inproceedings{Krauter_2017, place={Hamburg}, title={Comparison of Conversion
Efficiencies and Energy Yields of Micro-Inverters for Photovoltaic Modules}, booktitle={VDE-Proceedings
of NEIS 2017 – Conference on Sustainable Energy Supply and Energy Storage Systems
by IEEE-PES. Hamburg (Deutschland), 21.–22. September, 2017.}, author={Krauter,
Stefan}, year={2017} }'
chicago: Krauter, Stefan. “Comparison of Conversion Efficiencies and Energy Yields
of Micro-Inverters for Photovoltaic Modules.” In VDE-Proceedings of NEIS 2017
– Conference on Sustainable Energy Supply and Energy Storage Systems by IEEE-PES.
Hamburg (Deutschland), 21.–22. September, 2017. Hamburg, 2017.
ieee: S. Krauter, “Comparison of Conversion Efficiencies and Energy Yields of Micro-Inverters
for Photovoltaic Modules,” in VDE-Proceedings of NEIS 2017 – Conference on
Sustainable Energy Supply and Energy Storage Systems by IEEE-PES. Hamburg (Deutschland),
21.–22. September, 2017., Hamburg, 2017.
mla: Krauter, Stefan. “Comparison of Conversion Efficiencies and Energy Yields of
Micro-Inverters for Photovoltaic Modules.” VDE-Proceedings of NEIS 2017 – Conference
on Sustainable Energy Supply and Energy Storage Systems by IEEE-PES. Hamburg (Deutschland),
21.–22. September, 2017., 2017.
short: 'S. Krauter, in: VDE-Proceedings of NEIS 2017 – Conference on Sustainable
Energy Supply and Energy Storage Systems by IEEE-PES. Hamburg (Deutschland), 21.–22.
September, 2017., Hamburg, 2017.'
conference:
end_date: 2017-11-22
location: Hamburg
name: NEIS 2017 – Conference on Sustainable Energy Supply and Energy Storage Systems
by IEEE-PES
start_date: 2017-11-21
date_created: 2019-01-14T08:40:37Z
date_updated: 2022-01-06T07:03:13Z
department:
- _id: '53'
language:
- iso: eng
place: Hamburg
publication: VDE-Proceedings of NEIS 2017 – Conference on Sustainable Energy Supply
and Energy Storage Systems by IEEE-PES. Hamburg (Deutschland), 21.–22. September,
2017.
status: public
title: Comparison of Conversion Efficiencies and Energy Yields of Micro-Inverters
for Photovoltaic Modules
type: conference
user_id: '16148'
year: '2017'
...
---
_id: '6639'
author:
- first_name: Stefan
full_name: Krauter, Stefan
id: '28836'
last_name: Krauter
orcid: 0000-0002-3594-260X
- first_name: Ali
full_name: Ameli, Ali
last_name: Ameli
citation:
ama: 'Krauter S, Ameli A. Smart Charging Management System of Plugged-in EVs for
Optimal Operation of Future Power Systems. In: VDE-Proceedings of NEIS 2017
– Conference on Sustainable Energy Supply and Energy Storage Systems by IEEE-PES.
Hamburg (Deutschland), 21.–22. September, 2017. Hamburg; 2017.'
apa: Krauter, S., & Ameli, A. (2017). Smart Charging Management System of Plugged-in
EVs for Optimal Operation of Future Power Systems. In VDE-Proceedings of NEIS
2017 – Conference on Sustainable Energy Supply and Energy Storage Systems by IEEE-PES.
Hamburg (Deutschland), 21.–22. September, 2017. Hamburg.
bibtex: '@inproceedings{Krauter_Ameli_2017, place={Hamburg}, title={Smart Charging
Management System of Plugged-in EVs for Optimal Operation of Future Power Systems.},
booktitle={VDE-Proceedings of NEIS 2017 – Conference on Sustainable Energy Supply
and Energy Storage Systems by IEEE-PES. Hamburg (Deutschland), 21.–22. September,
2017.}, author={Krauter, Stefan and Ameli, Ali}, year={2017} }'
chicago: Krauter, Stefan, and Ali Ameli. “Smart Charging Management System of Plugged-in
EVs for Optimal Operation of Future Power Systems.” In VDE-Proceedings of NEIS
2017 – Conference on Sustainable Energy Supply and Energy Storage Systems by IEEE-PES.
Hamburg (Deutschland), 21.–22. September, 2017. Hamburg, 2017.
ieee: S. Krauter and A. Ameli, “Smart Charging Management System of Plugged-in EVs
for Optimal Operation of Future Power Systems.,” in VDE-Proceedings of NEIS
2017 – Conference on Sustainable Energy Supply and Energy Storage Systems by IEEE-PES.
Hamburg (Deutschland), 21.–22. September, 2017., Hamburg, 2017.
mla: Krauter, Stefan, and Ali Ameli. “Smart Charging Management System of Plugged-in
EVs for Optimal Operation of Future Power Systems.” VDE-Proceedings of NEIS
2017 – Conference on Sustainable Energy Supply and Energy Storage Systems by IEEE-PES.
Hamburg (Deutschland), 21.–22. September, 2017., 2017.
short: 'S. Krauter, A. Ameli, in: VDE-Proceedings of NEIS 2017 – Conference on Sustainable
Energy Supply and Energy Storage Systems by IEEE-PES. Hamburg (Deutschland), 21.–22.
September, 2017., Hamburg, 2017.'
conference:
end_date: 2017-09-22
location: Hamburg
name: NEIS 2017 – Conference on Sustainable Energy Supply and Energy Storage Systems
by IEEE-PES
start_date: 2017-09-21
date_created: 2019-01-14T08:46:02Z
date_updated: 2022-01-06T07:03:13Z
department:
- _id: '53'
language:
- iso: eng
place: Hamburg
publication: VDE-Proceedings of NEIS 2017 – Conference on Sustainable Energy Supply
and Energy Storage Systems by IEEE-PES. Hamburg (Deutschland), 21.–22. September,
2017.
status: public
title: Smart Charging Management System of Plugged-in EVs for Optimal Operation of
Future Power Systems.
type: conference
user_id: '16148'
year: '2017'
...
---
_id: '10594'
abstract:
- lang: eng
text: "Multiobjective optimization plays an increasingly important role in modern
applications, where several criteria are often of equal importance. The task in
multiobjective optimization and multiobjective optimal control is therefore to
compute\r\nthe set of optimal compromises (the Pareto set) between the conflicting
objectives.\r\n\r\nSince – in contrast to the solution of a single objective optimization
problem – the\r\nPareto set generally consists of an infinite number of solutions,
the computational\r\neffort can quickly become challenging. This is even more
the case when many problems have to be solved, when the number of objectives is
high, or when the objectives\r\nare costly to evaluate. Consequently, this thesis
is devoted to the identification and\r\nexploitation of structure both in the
Pareto set and the dynamics of the underlying\r\nmodel as well as to the development
of efficient algorithms for solving problems with\r\nadditional parameters, with
a high number of objectives or with PDE-constraints.\r\nThese three challenges
are addressed in three respective parts.\r\n\r\nIn the first part, predictor-corrector
methods are extended to entire Pareto sets.\r\nWhen certain smoothness assumptions
are satisfied, then the set of parameter dependent Pareto sets possesses additional
structure, i.e. it is a manifold. The tangent\r\nspace can be approximated numerically
which yields a direction for the predictor\r\nstep. In the corrector step, the
predicted set converges to the Pareto set at a new\r\nparameter value. The resulting
algorithm is applied to an example from autonomous\r\ndriving.\r\n\r\nIn the second
part, the hierarchical structure of Pareto sets is investigated. When\r\nconsidering
a subset of the objectives, the resulting solution is a subset of the Pareto\r\nset
of the original problem. Under additional smoothness assumptions, the respective
subsets are located on the boundary of the Pareto set of the full problem. This\r\nway,
the “skeleton” of a Pareto set can be computed and due to the exponential\r\nincrease
in computing time with the number of objectives, the computations of\r\nthese
subsets are significantly faster which is demonstrated using an example from\r\nindustrial
laundries.\r\n\r\nIn the third part, PDE-constrained multiobjective optimal control
problems are\r\naddressed by reduced order modeling methods. Reduced order models
exploit the\r\nstructure in the system dynamics, for example by describing the
dynamics of only the\r\nmost energetic modes. The model reduction introduces an
error in both the function values and their gradients, which has to be taken into
account in the development of\r\nalgorithms. Both scalarization and set-oriented
approaches are coupled with reduced\r\norder modeling. Convergence results are
presented and the numerical benefit is\r\ninvestigated. The algorithms are applied
to semi-linear heat flow problems as well\r\nas to the Navier-Stokes equations.\r\n"
author:
- first_name: Sebastian
full_name: Peitz, Sebastian
id: '47427'
last_name: Peitz
orcid: https://orcid.org/0000-0002-3389-793X
citation:
ama: Peitz S. Exploiting Structure in Multiobjective Optimization and Optimal
Control.; 2017. doi:10.17619/UNIPB/1-176
apa: Peitz, S. (2017). Exploiting structure in multiobjective optimization
and optimal control. https://doi.org/10.17619/UNIPB/1-176
bibtex: '@book{Peitz_2017, title={ Exploiting structure in multiobjective optimization
and optimal control}, DOI={10.17619/UNIPB/1-176},
author={Peitz, Sebastian}, year={2017} }'
chicago: Peitz, Sebastian. Exploiting Structure in Multiobjective Optimization
and Optimal Control, 2017. https://doi.org/10.17619/UNIPB/1-176.
ieee: S. Peitz, Exploiting structure in multiobjective optimization and optimal
control. 2017.
mla: Peitz, Sebastian. Exploiting Structure in Multiobjective Optimization
and Optimal Control. 2017, doi:10.17619/UNIPB/1-176.
short: S. Peitz, Exploiting Structure in Multiobjective Optimization and Optimal
Control, 2017.
date_created: 2019-07-10T08:12:22Z
date_updated: 2022-01-06T06:50:46Z
ddc:
- '510'
department:
- _id: '101'
doi: 10.17619/UNIPB/1-176
file:
- access_level: closed
content_type: application/pdf
creator: speitz
date_created: 2020-03-13T12:52:50Z
date_updated: 2020-03-13T12:52:50Z
file_id: '16298'
file_name: Dissertation_Peitz.pdf
file_size: 16636801
relation: main_file
success: 1
file_date_updated: 2020-03-13T12:52:50Z
has_accepted_license: '1'
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://d-nb.info/1139356542/34
oa: '1'
project:
- _id: '52'
name: Computing Resources Provided by the Paderborn Center for Parallel Computing
publication_status: published
status: public
title: " \tExploiting structure in multiobjective optimization and optimal control"
type: dissertation
user_id: '47427'
year: '2017'
...