---
_id: '23052'
author:
- first_name: Zeeshan
full_name: Shareef, Zeeshan
last_name: Shareef
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
citation:
ama: Shareef Z, Trächtler A. Simultaneous path planning and trajectory optimization
for robotic manipulators using discrete mechanics and optimal control. Robotica.
2016;34(06):1322-1334.
apa: Shareef, Z., & Trächtler, A. (2016). Simultaneous path planning and trajectory
optimization for robotic manipulators using discrete mechanics and optimal control.
Robotica, 34(06), 1322–1334.
bibtex: '@article{Shareef_Trächtler_2016, title={Simultaneous path planning and
trajectory optimization for robotic manipulators using discrete mechanics and
optimal control}, volume={34}, number={06}, journal={Robotica}, author={Shareef,
Zeeshan and Trächtler, Ansgar}, year={2016}, pages={1322–1334} }'
chicago: 'Shareef, Zeeshan, and Ansgar Trächtler. “Simultaneous Path Planning and
Trajectory Optimization for Robotic Manipulators Using Discrete Mechanics and
Optimal Control.” Robotica 34, no. 06 (2016): 1322–34.'
ieee: Z. Shareef and A. Trächtler, “Simultaneous path planning and trajectory optimization
for robotic manipulators using discrete mechanics and optimal control,” Robotica,
vol. 34, no. 06, pp. 1322–1334, 2016.
mla: Shareef, Zeeshan, and Ansgar Trächtler. “Simultaneous Path Planning and Trajectory
Optimization for Robotic Manipulators Using Discrete Mechanics and Optimal Control.”
Robotica, vol. 34, no. 06, 2016, pp. 1322–34.
short: Z. Shareef, A. Trächtler, Robotica 34 (2016) 1322–1334.
date_created: 2021-08-09T06:34:39Z
date_updated: 2022-01-06T06:55:45Z
department:
- _id: '153'
intvolume: ' 34'
issue: '06'
language:
- iso: eng
page: 1322 - 1334
publication: Robotica
status: public
title: Simultaneous path planning and trajectory optimization for robotic manipulators
using discrete mechanics and optimal control
type: journal_article
user_id: '24876'
volume: 34
year: '2016'
...
---
_id: '21688'
abstract:
- lang: eng
text: Additive Manufacturing offers a great potential for the optimization of products.
Therefore different approaches are feasible to exploit these potentials for elaborating
optimal solutions. For example these include optimization of weight or stiffness
of structural components as well as the integration of functions and other entities
of assemblies. Note, however, that additive manufacturing processes have process
specific limitations. Products, components and assemblies, as well as procedures
for the design and production preparation must be optimized with regard to a successful
additive manufacturing. The use of already known tools for the optimization and
design needs to be reconsidered and adapted to theadditive manufacturing. This
also includes the production planning with component orientation in build chamber
as well as a necessary quality management system. This paper shows several ways
for product optimization with additive manufacturing, often based on topology
optimization, and procedures for information gathering, decision making and shape
determination for part optimization for Additive Manufacturing.
author:
- first_name: T.
full_name: Reiher, T.
last_name: Reiher
- first_name: R.
full_name: Koch, R.
last_name: Koch
citation:
ama: 'Reiher T, Koch R. Product optimization with and for Additive Manufacturing.
In: 27th Annual International Solid Freeform Fabrication Symposium . Vol
27. ; 2016:2236-2249. doi:http://utw10945.utweb.utexas.edu/sites/default/files/2016/179-Reiher.pdf'
apa: Reiher, T., & Koch, R. (2016). Product optimization with and for Additive
Manufacturing. In 27th Annual International Solid Freeform Fabrication Symposium
(Vol. 27, pp. 2236–2249). http://utw10945.utweb.utexas.edu/sites/default/files/2016/179-Reiher.pdf
bibtex: '@inproceedings{Reiher_Koch_2016, title={Product optimization with and for
Additive Manufacturing}, volume={27}, DOI={http://utw10945.utweb.utexas.edu/sites/default/files/2016/179-Reiher.pdf},
booktitle={27th Annual International Solid Freeform Fabrication Symposium }, author={Reiher,
T. and Koch, R.}, year={2016}, pages={2236–2249} }'
chicago: Reiher, T., and R. Koch. “Product Optimization with and for Additive Manufacturing.”
In 27th Annual International Solid Freeform Fabrication Symposium , 27:2236–49,
2016. http://utw10945.utweb.utexas.edu/sites/default/files/2016/179-Reiher.pdf.
ieee: T. Reiher and R. Koch, “Product optimization with and for Additive Manufacturing,”
in 27th Annual International Solid Freeform Fabrication Symposium , 2016,
vol. 27, pp. 2236–2249.
mla: Reiher, T., and R. Koch. “Product Optimization with and for Additive Manufacturing.”
27th Annual International Solid Freeform Fabrication Symposium , vol. 27,
2016, pp. 2236–49, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2016/179-Reiher.pdf.
short: 'T. Reiher, R. Koch, in: 27th Annual International Solid Freeform Fabrication
Symposium , 2016, pp. 2236–2249.'
date_created: 2021-04-21T07:32:02Z
date_updated: 2022-01-06T06:55:10Z
department:
- _id: '144'
- _id: '219'
- _id: '624'
doi: http://utw10945.utweb.utexas.edu/sites/default/files/2016/179-Reiher.pdf
intvolume: ' 27'
language:
- iso: eng
page: 2236-2249
publication: '27th Annual International Solid Freeform Fabrication Symposium '
status: public
title: Product optimization with and for Additive Manufacturing
type: conference
user_id: '55833'
volume: 27
year: '2016'
...
---
_id: '21702'
abstract:
- lang: eng
text: Nowadays, the material efficiency and part reliability are two majorissues
in product development. Thus a product optimization often requires complex structures
that are hard to be manufactured conventionally. Additive Manufacturing (AM) however
offers great potentials for producing complex shaped parts economically. Different
approaches are feasible to exploit these potentials based on the part’s application
from shape optimization of structural components to the integration of functions
and other entities of assemblies. Several parameters are defined that influence
the costs and quality of the future product and carefully have to be balanced.
To do so, the use of already known tools for the optimization and design needs
to be reconsidered and adapted to the special characteristics of AM. As not all
optimization potentials can be realized perfectly, a decision methodology is required
to obtain the relevant potentials and to get to a trade-off between all requirements
including the ecological impact. The paper shows different approaches for product
optimization with AM and procedures for decision making in order to get to the
optimal solution.
author:
- first_name: T.
full_name: Reiher, T.
last_name: Reiher
- first_name: G.
full_name: Deppe, G.
last_name: Deppe
- first_name: R.
full_name: Koch, R.
last_name: Koch
citation:
ama: 'Reiher T, Deppe G, Koch R. Combining material efficiency and part reliability
by product optimization applying additive manufacturing. In: International
Conference Production Engineering and Management 2016. Vol 6. ; 2016:27-38.
doi:https://www.th-owl.de/elsa/download/333/334/PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf'
apa: Reiher, T., Deppe, G., & Koch, R. (2016). Combining material efficiency
and part reliability by product optimization applying additive manufacturing.
In International Conference Production Engineering and Management 2016
(Vol. 6, pp. 27–38). https://www.th-owl.de/elsa/download/333/334/PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf
bibtex: '@inproceedings{Reiher_Deppe_Koch_2016, title={Combining material efficiency
and part reliability by product optimization applying additive manufacturing},
volume={6}, DOI={https://www.th-owl.de/elsa/download/333/334/PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf},
booktitle={International Conference Production Engineering and Management 2016},
author={Reiher, T. and Deppe, G. and Koch, R.}, year={2016}, pages={27–38} }'
chicago: Reiher, T., G. Deppe, and R. Koch. “Combining Material Efficiency and Part
Reliability by Product Optimization Applying Additive Manufacturing.” In International
Conference Production Engineering and Management 2016, 6:27–38, 2016. https://www.th-owl.de/elsa/download/333/334/PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf.
ieee: T. Reiher, G. Deppe, and R. Koch, “Combining material efficiency and part
reliability by product optimization applying additive manufacturing,” in International
Conference Production Engineering and Management 2016, 2016, vol. 6, pp. 27–38.
mla: Reiher, T., et al. “Combining Material Efficiency and Part Reliability by Product
Optimization Applying Additive Manufacturing.” International Conference Production
Engineering and Management 2016, vol. 6, 2016, pp. 27–38, doi:https://www.th-owl.de/elsa/download/333/334/PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf.
short: 'T. Reiher, G. Deppe, R. Koch, in: International Conference Production Engineering
and Management 2016, 2016, pp. 27–38.'
date_created: 2021-04-21T07:40:35Z
date_updated: 2022-01-06T06:55:11Z
department:
- _id: '144'
- _id: '219'
- _id: '624'
doi: https://www.th-owl.de/elsa/download/333/334/PEM_2016_Proceeding_2016_09_14_Inhaltsnavigation.pdf
intvolume: ' 6'
language:
- iso: eng
page: 27-38
publication: International Conference Production Engineering and Management 2016
publication_identifier:
isbn:
- 978-3-946856-00-9
status: public
title: Combining material efficiency and part reliability by product optimization
applying additive manufacturing
type: conference
user_id: '55833'
volume: 6
year: '2016'
...
---
_id: '21730'
author:
- first_name: K.
full_name: Yanaka, K.
last_name: Yanaka
- first_name: T.
full_name: Yamanouchi, T.
last_name: Yamanouchi
citation:
ama: Yanaka K, Yamanouchi T. 3D Image Display Courses for Information Media Students.
IEEE Computer Graphics and Applications. 2016;36(2):68-73. doi:10.1109/MCG.2016.36
apa: Yanaka, K., & Yamanouchi, T. (2016). 3D Image Display Courses for Information
Media Students. IEEE Computer Graphics and Applications, 36(2),
68–73. https://doi.org/10.1109/MCG.2016.36
bibtex: '@article{Yanaka_Yamanouchi_2016, title={3D Image Display Courses for Information
Media Students}, volume={36}, DOI={10.1109/MCG.2016.36},
number={2}, journal={IEEE Computer Graphics and Applications}, publisher={Editors
G. Domik and G. S. Owen}, author={Yanaka, K. and Yamanouchi, T.}, year={2016},
pages={68–73} }'
chicago: 'Yanaka, K., and T. Yamanouchi. “3D Image Display Courses for Information
Media Students.” IEEE Computer Graphics and Applications 36, no. 2 (2016):
68–73. https://doi.org/10.1109/MCG.2016.36.'
ieee: K. Yanaka and T. Yamanouchi, “3D Image Display Courses for Information Media
Students,” IEEE Computer Graphics and Applications, vol. 36, no. 2, pp.
68–73, 2016.
mla: Yanaka, K., and T. Yamanouchi. “3D Image Display Courses for Information Media
Students.” IEEE Computer Graphics and Applications, vol. 36, no. 2, Editors
G. Domik and G. S. Owen, 2016, pp. 68–73, doi:10.1109/MCG.2016.36.
short: K. Yanaka, T. Yamanouchi, IEEE Computer Graphics and Applications 36 (2016)
68–73.
date_created: 2021-04-25T13:35:37Z
date_updated: 2022-01-06T06:55:12Z
department:
- _id: '65'
doi: 10.1109/MCG.2016.36
intvolume: ' 36'
issue: '2'
language:
- iso: eng
page: 68-73
publication: IEEE Computer Graphics and Applications
publisher: Editors G. Domik and G. S. Owen
status: public
title: 3D Image Display Courses for Information Media Students
type: journal_article
user_id: '90'
volume: 36
year: '2016'
...
---
_id: '731'
abstract:
- lang: eng
text: "Traditional cellular networks are forced to remain active regardless of the
actual amount of traffic that is currently produced/requested, with a clear waste
of energy. Two-layer mobile networks with separated signalling and data layers
have been recently proposed for energy savings in future implementations. These
networks are able to switch off unneeded data cells completely while maintaining
full coverage with their signalling cells, thus saving energy. In this demonstration,
we showcase a testbed that uses Wi-Fi access points to emulate small cells of
the data layer and a publicly available cellular connection as the signalling
layer. We use off-the-shelf Android smartphones with an ad-hoc networking management
module and a MultiPath TCP-enabled kernel to manage the Wi-Fi and cellular interfaces
simultaneously.\r\nThe testbed is used to demonstrate the general feasibility
of this layered architecture and to facilitate experiments with network-wide resource
optimization. "
author:
- first_name: Manuel
full_name: Peuster, Manuel
id: '13271'
last_name: Peuster
- first_name: Holger
full_name: Karl, Holger
id: '126'
last_name: Karl
- first_name: Alessandro
full_name: Enrico Redondi, Alessandro
last_name: Enrico Redondi
- first_name: Antonio
full_name: Capone, Antonio
last_name: Capone
citation:
ama: 'Peuster M, Karl H, Enrico Redondi A, Capone A. Demonstrating on-demand cell
switching with a two-layer mobile network testbed. In: IEEE Conference on Computer
Communications Workshops, INFOCOM Workshops 2016, San Francisco, CA, USA, April
10-14, 2016. ; 2016:1015--1016. doi:10.1109/INFCOMW.2016.7562232'
apa: Peuster, M., Karl, H., Enrico Redondi, A., & Capone, A. (2016). Demonstrating
on-demand cell switching with a two-layer mobile network testbed. In IEEE Conference
on Computer Communications Workshops, INFOCOM Workshops 2016, San Francisco, CA,
USA, April 10-14, 2016 (pp. 1015--1016). San Francisco. https://doi.org/10.1109/INFCOMW.2016.7562232
bibtex: '@inproceedings{Peuster_Karl_Enrico Redondi_Capone_2016, title={Demonstrating
on-demand cell switching with a two-layer mobile network testbed}, DOI={10.1109/INFCOMW.2016.7562232},
booktitle={IEEE Conference on Computer Communications Workshops, INFOCOM Workshops
2016, San Francisco, CA, USA, April 10-14, 2016}, author={Peuster, Manuel and
Karl, Holger and Enrico Redondi, Alessandro and Capone, Antonio}, year={2016},
pages={1015--1016} }'
chicago: Peuster, Manuel, Holger Karl, Alessandro Enrico Redondi, and Antonio Capone.
“Demonstrating On-Demand Cell Switching with a Two-Layer Mobile Network Testbed.”
In IEEE Conference on Computer Communications Workshops, INFOCOM Workshops
2016, San Francisco, CA, USA, April 10-14, 2016, 1015--1016, 2016. https://doi.org/10.1109/INFCOMW.2016.7562232.
ieee: M. Peuster, H. Karl, A. Enrico Redondi, and A. Capone, “Demonstrating on-demand
cell switching with a two-layer mobile network testbed,” in IEEE Conference
on Computer Communications Workshops, INFOCOM Workshops 2016, San Francisco, CA,
USA, April 10-14, 2016, San Francisco, 2016, pp. 1015--1016.
mla: Peuster, Manuel, et al. “Demonstrating On-Demand Cell Switching with a Two-Layer
Mobile Network Testbed.” IEEE Conference on Computer Communications Workshops,
INFOCOM Workshops 2016, San Francisco, CA, USA, April 10-14, 2016, 2016, pp.
1015--1016, doi:10.1109/INFCOMW.2016.7562232.
short: 'M. Peuster, H. Karl, A. Enrico Redondi, A. Capone, in: IEEE Conference on
Computer Communications Workshops, INFOCOM Workshops 2016, San Francisco, CA,
USA, April 10-14, 2016, 2016, pp. 1015--1016.'
conference:
location: San Francisco
name: IEEE Conference on Computer Communications Workshops, INFOCOM
date_created: 2017-11-27T10:22:25Z
date_updated: 2022-01-06T07:03:34Z
ddc:
- '000'
department:
- _id: '75'
doi: 10.1109/INFCOMW.2016.7562232
file:
- access_level: closed
content_type: application/pdf
creator: ups
date_created: 2018-11-02T14:11:50Z
date_updated: 2018-11-02T14:11:50Z
file_id: '5264'
file_name: 07562232.pdf
file_size: 2080026
relation: main_file
success: 1
file_date_updated: 2018-11-02T14:11:50Z
has_accepted_license: '1'
language:
- iso: eng
main_file_link:
- url: http://ieeexplore.ieee.org/document/7562232/
page: 1015--1016
project:
- _id: '4'
name: SFB 901 - Project Area C
- _id: '1'
name: SFB 901
- _id: '16'
name: SFB 901 - Subproject C4
publication: IEEE Conference on Computer Communications Workshops, INFOCOM Workshops
2016, San Francisco, CA, USA, April 10-14, 2016
publication_status: published
status: public
title: Demonstrating on-demand cell switching with a two-layer mobile network testbed
type: conference
user_id: '477'
year: '2016'
...
---
_id: '7484'
author:
- first_name: Sandro Phil
full_name: Hoffmann, Sandro Phil
last_name: Hoffmann
- first_name: Maximilian
full_name: Albert, Maximilian
last_name: Albert
- first_name: Cedrik
full_name: Meier, Cedrik
id: '20798'
last_name: Meier
orcid: https://orcid.org/0000-0002-3787-3572
citation:
ama: Hoffmann SP, Albert M, Meier C. Fabrication of fully undercut ZnO-based photonic
crystal membranes with 3D optical confinement. Superlattices and Microstructures.
2016;97:397-408. doi:10.1016/j.spmi.2016.07.006
apa: Hoffmann, S. P., Albert, M., & Meier, C. (2016). Fabrication of fully undercut
ZnO-based photonic crystal membranes with 3D optical confinement. Superlattices
and Microstructures, 97, 397–408. https://doi.org/10.1016/j.spmi.2016.07.006
bibtex: '@article{Hoffmann_Albert_Meier_2016, title={Fabrication of fully undercut
ZnO-based photonic crystal membranes with 3D optical confinement}, volume={97},
DOI={10.1016/j.spmi.2016.07.006},
journal={Superlattices and Microstructures}, publisher={Elsevier BV}, author={Hoffmann,
Sandro Phil and Albert, Maximilian and Meier, Cedrik}, year={2016}, pages={397–408}
}'
chicago: 'Hoffmann, Sandro Phil, Maximilian Albert, and Cedrik Meier. “Fabrication
of Fully Undercut ZnO-Based Photonic Crystal Membranes with 3D Optical Confinement.”
Superlattices and Microstructures 97 (2016): 397–408. https://doi.org/10.1016/j.spmi.2016.07.006.'
ieee: S. P. Hoffmann, M. Albert, and C. Meier, “Fabrication of fully undercut ZnO-based
photonic crystal membranes with 3D optical confinement,” Superlattices and
Microstructures, vol. 97, pp. 397–408, 2016.
mla: Hoffmann, Sandro Phil, et al. “Fabrication of Fully Undercut ZnO-Based Photonic
Crystal Membranes with 3D Optical Confinement.” Superlattices and Microstructures,
vol. 97, Elsevier BV, 2016, pp. 397–408, doi:10.1016/j.spmi.2016.07.006.
short: S.P. Hoffmann, M. Albert, C. Meier, Superlattices and Microstructures 97
(2016) 397–408.
date_created: 2019-02-04T13:55:37Z
date_updated: 2022-01-06T07:03:39Z
department:
- _id: '15'
- _id: '230'
- _id: '35'
- _id: '287'
doi: 10.1016/j.spmi.2016.07.006
intvolume: ' 97'
language:
- iso: eng
page: 397-408
project:
- _id: '53'
name: TRR 142
- _id: '55'
name: TRR 142 - Project Area B
- _id: '54'
name: TRR 142 - Project Area A
- _id: '66'
name: TRR 142 - Subproject B1
- _id: '62'
name: TRR 142 - Subproject A5
publication: Superlattices and Microstructures
publication_identifier:
issn:
- 0749-6036
publication_status: published
publisher: Elsevier BV
status: public
title: Fabrication of fully undercut ZnO-based photonic crystal membranes with 3D
optical confinement
type: journal_article
user_id: '20798'
volume: 97
year: '2016'
...
---
_id: '8759'
abstract:
- lang: eng
text: In a wide range of applications, it is desirable to optimally control a system
with respect to concurrent, potentially competing goals. This gives rise to a
multiobjective optimal control problem where, instead of computing a single optimal
solution, the set of optimal compromises, the so-called Pareto set, has to be
approximated. When it is not possible to compute the entire control trajectory
in advance, for instance due to uncertainties or unforeseeable events, model predictive
control methods can be applied to control the system during operation in real
time. In this article, we present an algorithm for the solution of multiobjective
model predictive control problems. In an offline scenario, it can be used to compute
the entire set of optimal compromises whereas in a real time scenario, one optimal
compromise is computed according to an operator's preference. The results are
illustrated using the example of an industrial laundry. A logistics model of the
laundry is developed and then utilized in the optimization routine. Results are
presented for an offline as well as an online scenario.
author:
- first_name: Sebastian
full_name: Peitz, Sebastian
id: '47427'
last_name: Peitz
orcid: https://orcid.org/0000-0002-3389-793X
- first_name: Manuel
full_name: Gräler, Manuel
last_name: Gräler
- first_name: Christian
full_name: Henke, Christian
last_name: Henke
- first_name: Mirko Hessel-von
full_name: Molo, Mirko Hessel-von
last_name: Molo
- first_name: Michael
full_name: Dellnitz, Michael
last_name: Dellnitz
- first_name: Ansgar
full_name: Trächtler, Ansgar
last_name: Trächtler
citation:
ama: 'Peitz S, Gräler M, Henke C, Molo MH, Dellnitz M, Trächtler A. Multiobjective
Model Predictive Control of an Industrial Laundry. In: Procedia Technology.
; 2016:483-490. doi:10.1016/j.protcy.2016.08.061'
apa: Peitz, S., Gräler, M., Henke, C., Molo, M. H., Dellnitz, M., & Trächtler,
A. (2016). Multiobjective Model Predictive Control of an Industrial Laundry. In
Procedia Technology (pp. 483–490). https://doi.org/10.1016/j.protcy.2016.08.061
bibtex: '@inproceedings{Peitz_Gräler_Henke_Molo_Dellnitz_Trächtler_2016, title={Multiobjective
Model Predictive Control of an Industrial Laundry}, DOI={10.1016/j.protcy.2016.08.061},
booktitle={Procedia Technology}, author={Peitz, Sebastian and Gräler, Manuel and
Henke, Christian and Molo, Mirko Hessel-von and Dellnitz, Michael and Trächtler,
Ansgar}, year={2016}, pages={483–490} }'
chicago: Peitz, Sebastian, Manuel Gräler, Christian Henke, Mirko Hessel-von Molo,
Michael Dellnitz, and Ansgar Trächtler. “Multiobjective Model Predictive Control
of an Industrial Laundry.” In Procedia Technology, 483–90, 2016. https://doi.org/10.1016/j.protcy.2016.08.061.
ieee: S. Peitz, M. Gräler, C. Henke, M. H. Molo, M. Dellnitz, and A. Trächtler,
“Multiobjective Model Predictive Control of an Industrial Laundry,” in Procedia
Technology, 2016, pp. 483–490.
mla: Peitz, Sebastian, et al. “Multiobjective Model Predictive Control of an Industrial
Laundry.” Procedia Technology, 2016, pp. 483–90, doi:10.1016/j.protcy.2016.08.061.
short: 'S. Peitz, M. Gräler, C. Henke, M.H. Molo, M. Dellnitz, A. Trächtler, in:
Procedia Technology, 2016, pp. 483–490.'
date_created: 2019-03-29T13:35:59Z
date_updated: 2022-01-06T07:04:00Z
department:
- _id: '101'
doi: 10.1016/j.protcy.2016.08.061
language:
- iso: eng
page: 483-490
publication: Procedia Technology
publication_identifier:
issn:
- 2212-0173
publication_status: published
status: public
title: Multiobjective Model Predictive Control of an Industrial Laundry
type: conference
user_id: '47427'
year: '2016'
...
---
_id: '9957'
abstract:
- lang: eng
text: Leistungshalbleitermodule werden leistungsfähiger, effizienter, kompakter
und haltbarer Ziel dieses Innovationsprojekts des Spitzenclusters „it’s OWL –
Intelligente Technische Systeme OstWestfalen-Lippe“ ist die Entwicklung von selbstoptimierenden
Verfahren, um unter variablen Produktionsbedingungen zuverlässige Kupferbondverbindungen
herstellen zu können. Die Ultraschall-Drahtbondmaschine erhält die Fähigkeit,
sich automatisch an veränderte Bedingungen anzupassen. Hierzu wird der gesamte
Prozess der Ultraschall-Verbindungsbildung modelliert und neueste Verfahren der
Selbstoptimierung angewandt. Die Evaluierung erfolgt anhand eines Prototypen in
Form einer modifizierten Bondmaschine. Intelligent production of heavy copper
wire bonds It is the aim of this innovation-project to develop a self-optimization
system for ultrasonic copper wire bonding. It is part of the leading edge cluster
“it’s OWL”. The bonding machine will be able to react autonomously to changing
boundary conditions to ensure constant and reliable bonding results. For this,
the hole bonding process is modeled in great detail and newest self-optimization
techniques are utilized. A prototype-system incorporated in a serial machine is
used for evaluation.
author:
- first_name: Michael
full_name: Brökelmann, Michael
last_name: Brökelmann
- first_name: Andreas
full_name: Unger, Andreas
last_name: Unger
- first_name: Tobias
full_name: Meyer, Tobias
last_name: Meyer
- first_name: Simon
full_name: Althoff, Simon
last_name: Althoff
- first_name: Walter
full_name: Sextro, Walter
id: '21220'
last_name: Sextro
- first_name: Matthias
full_name: Hunstig, Matthias
last_name: Hunstig
- first_name: Florian
full_name: Biermann, Florian
last_name: Biermann
- first_name: Karsten
full_name: Guth, Karsten
last_name: Guth
citation:
ama: Brökelmann M, Unger A, Meyer T, et al. Kupferbondverbindungen intelligent herstellen.
wt-online. 2016;7/8:512-519.
apa: Brökelmann, M., Unger, A., Meyer, T., Althoff, S., Sextro, W., Hunstig, M.,
… Guth, K. (2016). Kupferbondverbindungen intelligent herstellen. Wt-Online,
7/8, 512–519.
bibtex: '@article{Brökelmann_Unger_Meyer_Althoff_Sextro_Hunstig_Biermann_Guth_2016,
title={Kupferbondverbindungen intelligent herstellen}, volume={7/8}, journal={wt-online},
author={Brökelmann, Michael and Unger, Andreas and Meyer, Tobias and Althoff,
Simon and Sextro, Walter and Hunstig, Matthias and Biermann, Florian and Guth,
Karsten}, year={2016}, pages={512–519} }'
chicago: 'Brökelmann, Michael, Andreas Unger, Tobias Meyer, Simon Althoff, Walter
Sextro, Matthias Hunstig, Florian Biermann, and Karsten Guth. “Kupferbondverbindungen
Intelligent Herstellen.” Wt-Online 7/8 (2016): 512–19.'
ieee: M. Brökelmann et al., “Kupferbondverbindungen intelligent herstellen,”
wt-online, vol. 7/8, pp. 512–519, 2016.
mla: Brökelmann, Michael, et al. “Kupferbondverbindungen Intelligent Herstellen.”
Wt-Online, vol. 7/8, 2016, pp. 512–19.
short: M. Brökelmann, A. Unger, T. Meyer, S. Althoff, W. Sextro, M. Hunstig, F.
Biermann, K. Guth, Wt-Online 7/8 (2016) 512–519.
date_created: 2019-05-27T08:53:18Z
date_updated: 2020-05-07T05:33:52Z
department:
- _id: '151'
language:
- iso: eng
page: 512-519
popular_science: '1'
project:
- _id: '92'
grant_number: 02 PQ2210
name: Intelligente Herstellung zuverlässiger Kupferbondverbindungen
publication: wt-online
status: public
title: Kupferbondverbindungen intelligent herstellen
type: journal_article
user_id: '210'
volume: 7/8
year: '2016'
...
---
_id: '9963'
abstract:
- lang: eng
text: Tire-wheel assembly is the only connection between road and vehicle. Contacting
directly with road within postcard size of contact area, it is mounted and guided
by the suspension system. Therefore kinematics and compliances of suspension system
greatly influence the frictional coupling of tire tread elements and road surface
asperities by affecting pressure and sliding velocity distribution in the contact
zone. This study emphasizes the development of a numerical methodology for frictional
rolling contact analysis with focus on interaction of suspension system dynamics
and tire-road contact using ADAMS. For this purpose a comprehensive flexible multibody
system of the multi-link rear suspension is established, where both flexible and
rigid bodies are modeled to allow large displacements with included elastic effects.
To meet accuracy requirements for the high frequency applications, such as road
excitations, the amplitude- and frequency-dependency of rubber-metal bushings
is included. Furthermore the proposed flexible viscoelastic suspension model is
enhanced by a Flexible Ring Tire Model (FTire), which describes a 3D tire dynamic
response and covers any road excitations by tread submodel connected to road surface
model. Concerning the verification and validation procedure numerous experiments
are carried out to confirm the validity and the accuracy of both the developed
submodels and the entire model. The devised approach makes it possible to investigate
the influence of suspension system design on dynamical rolling contact and to
evaluate tire tread wear. Therefore it can be a useful tool to predict frictional
power distribution within the contact area under more realistic conditions.
author:
- first_name: Sergej
full_name: Kohl, Sergej
last_name: Kohl
- first_name: Walter
full_name: Sextro, Walter
id: '21220'
last_name: Sextro
- first_name: Sebastian
full_name: Schulze, Sebastian
last_name: Schulze
citation:
ama: 'Kohl S, Sextro W, Schulze S. Aspects of Flexible Viscoelastic Suspension Modeling
for Frictional Rolling Contact Analysis using ADAMS. In: The 2nd International
Conference on Automotive Innovation and Green Energy Vehicle (AiGEV 2016), Cyberjaya,
Malaysia, 2016. Cyberjaya, Malaysia, 2016; 2016:1-12.'
apa: Kohl, S., Sextro, W., & Schulze, S. (2016). Aspects of Flexible Viscoelastic
Suspension Modeling for Frictional Rolling Contact Analysis using ADAMS. In The
2nd International Conference on Automotive Innovation and Green Energy Vehicle
(AiGEV 2016), Cyberjaya, Malaysia, 2016. (pp. 1–12). Cyberjaya, Malaysia,
2016.
bibtex: '@inproceedings{Kohl_Sextro_Schulze_2016, place={Cyberjaya, Malaysia, 2016},
title={Aspects of Flexible Viscoelastic Suspension Modeling for Frictional Rolling
Contact Analysis using ADAMS}, booktitle={The 2nd International Conference on
Automotive Innovation and Green Energy Vehicle (AiGEV 2016), Cyberjaya, Malaysia,
2016.}, author={Kohl, Sergej and Sextro, Walter and Schulze, Sebastian}, year={2016},
pages={1–12} }'
chicago: Kohl, Sergej, Walter Sextro, and Sebastian Schulze. “Aspects of Flexible
Viscoelastic Suspension Modeling for Frictional Rolling Contact Analysis Using
ADAMS.” In The 2nd International Conference on Automotive Innovation and Green
Energy Vehicle (AiGEV 2016), Cyberjaya, Malaysia, 2016., 1–12. Cyberjaya,
Malaysia, 2016, 2016.
ieee: S. Kohl, W. Sextro, and S. Schulze, “Aspects of Flexible Viscoelastic Suspension
Modeling for Frictional Rolling Contact Analysis using ADAMS,” in The 2nd International
Conference on Automotive Innovation and Green Energy Vehicle (AiGEV 2016), Cyberjaya,
Malaysia, 2016., 2016, pp. 1–12.
mla: Kohl, Sergej, et al. “Aspects of Flexible Viscoelastic Suspension Modeling
for Frictional Rolling Contact Analysis Using ADAMS.” The 2nd International
Conference on Automotive Innovation and Green Energy Vehicle (AiGEV 2016), Cyberjaya,
Malaysia, 2016., 2016, pp. 1–12.
short: 'S. Kohl, W. Sextro, S. Schulze, in: The 2nd International Conference on
Automotive Innovation and Green Energy Vehicle (AiGEV 2016), Cyberjaya, Malaysia,
2016., Cyberjaya, Malaysia, 2016, 2016, pp. 1–12.'
date_created: 2019-05-27T09:13:14Z
date_updated: 2019-05-27T09:13:54Z
department:
- _id: '151'
keyword:
- Kinematics and compliances
- flexible viscoelastic suspension model
- frictional rolling contact analysis
- frictional power distribution.
language:
- iso: eng
page: 1-12
place: Cyberjaya, Malaysia, 2016
publication: The 2nd International Conference on Automotive Innovation and Green Energy
Vehicle (AiGEV 2016), Cyberjaya, Malaysia, 2016.
status: public
title: Aspects of Flexible Viscoelastic Suspension Modeling for Frictional Rolling
Contact Analysis using ADAMS
type: conference
user_id: '55222'
year: '2016'
...
---
_id: '9966'
abstract:
- lang: eng
text: Usage of copper wire bonds allows to push power boundaries imposed by aluminum
wire bonds. Copper allows higher electrical, thermal and mechanical loads than
aluminum, which currently is the most commonly used material in heavy wire bonding.
This is the main driving factor for increased usage of copper in high power applications
such as wind turbines, locomotives or electric vehicles. At the same time, usage
of copper also increases tool wear and reduces the range of parameter values for
a stable process, making the process more challenging. To overcome these drawbacks,
parameter adaptation at runtime using self-optimization is desired. A self-optimizing
system is based on system objectives that evaluate and quantify system performance.
System parameters can be changed at runtime such that pre-selected objective values
are reached. For adaptation of bond process parameters, model-based self-optimization
is employed. Since it is based on a model of the system, the bond process was
modeled. In addition to static model parameters such as wire and substrate material
properties and vibration characteristics of transducer and tool, variable model
inputs are process parameters. Main simulation result is bonded area in the wiresubstrate
contact. This model is then used to find valid and optimal working points before
operation. The working point is composed of normal force and ultrasonic voltage
trajectories, which are usually determined experimentally. Instead, multiobjective
optimalization is used to compute trajectories that simultaneously optimize bond
quality, process duration, tool wear and probability of tool-substrate contacts.
The values of these objectives are computed using the process model. At runtime,
selection among pre-determined optimal working points is sufficient to prioritize
individual objectives. This way, the computationally expensive process of numerically
solving a multiobjective optimal control problem and the demanding high speed
bonding process are separated. To evaluate to what extent the pre-defined goals
of self-optimization are met, an offthe- shelf heavy wire bonding machine was
modified to allow for parameter adaptation and for transmitting of measurement
data at runtime. This data is received by an external computer system and evaluated
to select a new working point. Then, new process parameters are sent to the modified
bonding machine for use for subsequent bonds. With these components, a full self-optimizing
system has been implemented.
author:
- first_name: Tobias
full_name: Meyer , Tobias
last_name: 'Meyer '
- first_name: Andreas
full_name: Unger, Andreas
last_name: Unger
- first_name: Simon
full_name: Althoff, Simon
last_name: Althoff
- first_name: Walter
full_name: Sextro, Walter
id: '21220'
last_name: Sextro
- first_name: Michael
full_name: Brökelmann, Michael
last_name: Brökelmann
- first_name: Matthias
full_name: Hunstig, Matthias
last_name: Hunstig
- first_name: Karsten
full_name: Guth, Karsten
last_name: Guth
citation:
ama: 'Meyer T, Unger A, Althoff S, et al. Reliable Manufacturing of Heavy Copper
Wire Bonds Using Online Parameter Adaptation. In: IEEE 66th Electronic Components
and Technology Conference. ; 2016:622-628. doi:10.1109/ECTC.2016.215'
apa: Meyer , T., Unger, A., Althoff, S., Sextro, W., Brökelmann, M., Hunstig, M.,
& Guth, K. (2016). Reliable Manufacturing of Heavy Copper Wire Bonds Using
Online Parameter Adaptation. In IEEE 66th Electronic Components and Technology
Conference (pp. 622–628). https://doi.org/10.1109/ECTC.2016.215
bibtex: '@inproceedings{Meyer _Unger_Althoff_Sextro_Brökelmann_Hunstig_Guth_2016,
title={Reliable Manufacturing of Heavy Copper Wire Bonds Using Online Parameter
Adaptation}, DOI={10.1109/ECTC.2016.215},
booktitle={IEEE 66th Electronic Components and Technology Conference}, author={Meyer
, Tobias and Unger, Andreas and Althoff, Simon and Sextro, Walter and Brökelmann,
Michael and Hunstig, Matthias and Guth, Karsten}, year={2016}, pages={622–628}
}'
chicago: Meyer , Tobias, Andreas Unger, Simon Althoff, Walter Sextro, Michael Brökelmann,
Matthias Hunstig, and Karsten Guth. “Reliable Manufacturing of Heavy Copper Wire
Bonds Using Online Parameter Adaptation.” In IEEE 66th Electronic Components
and Technology Conference, 622–28, 2016. https://doi.org/10.1109/ECTC.2016.215.
ieee: T. Meyer et al., “Reliable Manufacturing of Heavy Copper Wire Bonds
Using Online Parameter Adaptation,” in IEEE 66th Electronic Components and
Technology Conference, 2016, pp. 622–628.
mla: Meyer , Tobias, et al. “Reliable Manufacturing of Heavy Copper Wire Bonds Using
Online Parameter Adaptation.” IEEE 66th Electronic Components and Technology
Conference, 2016, pp. 622–28, doi:10.1109/ECTC.2016.215.
short: 'T. Meyer , A. Unger, S. Althoff, W. Sextro, M. Brökelmann, M. Hunstig, K.
Guth, in: IEEE 66th Electronic Components and Technology Conference, 2016, pp.
622–628.'
date_created: 2019-05-27T09:17:26Z
date_updated: 2020-05-07T05:33:53Z
department:
- _id: '151'
doi: 10.1109/ECTC.2016.215
keyword:
- Self-optimization
- adaptive system
- bond process
- copper wire
language:
- iso: eng
page: 622-628
project:
- _id: '92'
grant_number: 02 PQ2210
name: Intelligente Herstellung zuverlässiger Kupferbondverbindungen
publication: IEEE 66th Electronic Components and Technology Conference
quality_controlled: '1'
status: public
title: Reliable Manufacturing of Heavy Copper Wire Bonds Using Online Parameter Adaptation
type: conference
user_id: '210'
year: '2016'
...
---
_id: '9968'
abstract:
- lang: eng
text: To increase quality and reliability of copper wire bonds, self-optimization
is a promising technique. For the implementation of self-optimization for ultrasonic
heavy copper wire bonding machines, a model of stick-slip motion between tool
and wire and between wire and substrate during the bonding process is essential.
Investigations confirm that both of these contacts do indeed show stick-slip movement
in each period oscillation. In a first step, this paper shows the importance of
modeling the stick-slip effect by determining, monitoring and analyzing amplitudes
and phase angles of tooltip, wire and substrate experimentally during bonding
via laser measurements. In a second step, the paper presents a dynamic model which
has been parameterized using an iterative numerical parameter identification method.
This model includes Archard’s wear approach in order to compute the lost volume
of tool tip due to wear over the entire process time. A validation of the model
by comparing measured and calculated amplitudes of tool tip and wire reveals high
model quality. Then it is then possible to calculate the lifetime of the tool
for different process parameters, i.e. values of normal force and ultrasonic voltage.
author:
- first_name: Andreas
full_name: Unger, Andreas
last_name: Unger
- first_name: Reinhard
full_name: Schemmel, Reinhard
id: '28647'
last_name: Schemmel
- first_name: Tobias
full_name: Meyer, Tobias
last_name: Meyer
- first_name: Florian
full_name: Eacock, Florian
last_name: Eacock
- first_name: Paul
full_name: Eichwald, Paul
last_name: Eichwald
- first_name: Simon
full_name: Althoff, Simon
last_name: Althoff
- first_name: Walter
full_name: Sextro, Walter
id: '21220'
last_name: Sextro
- first_name: Michael
full_name: Brökelmann, Michael
last_name: Brökelmann
- first_name: Matthias
full_name: Hunstig, Matthias
last_name: Hunstig
- first_name: Karsten
full_name: Guth, Karsten
last_name: Guth
citation:
ama: 'Unger A, Schemmel R, Meyer T, et al. Validated Simulation of the Ultrasonic
Wire Bonding Process. In: Wear Modeling in Copper Wire Wedge Bonding. IEEE
CPMT Symposium Japan, 2016. IEEE CPMT Symposium Japan; 2016:251-254.'
apa: Unger, A., Schemmel, R., Meyer, T., Eacock, F., Eichwald, P., Althoff, S.,
… Guth, K. (2016). Validated Simulation of the Ultrasonic Wire Bonding Process.
In Wear Modeling in Copper Wire Wedge Bonding. IEEE CPMT Symposium Japan, 2016
(pp. 251–254). IEEE CPMT Symposium Japan.
bibtex: '@inproceedings{Unger_Schemmel_Meyer_Eacock_Eichwald_Althoff_Sextro_Brökelmann_Hunstig_Guth_2016,
place={IEEE CPMT Symposium Japan}, title={Validated Simulation of the Ultrasonic
Wire Bonding Process}, booktitle={Wear Modeling in Copper Wire Wedge Bonding.
IEEE CPMT Symposium Japan, 2016}, author={Unger, Andreas and Schemmel, Reinhard
and Meyer, Tobias and Eacock, Florian and Eichwald, Paul and Althoff, Simon and
Sextro, Walter and Brökelmann, Michael and Hunstig, Matthias and Guth, Karsten},
year={2016}, pages={251–254} }'
chicago: Unger, Andreas, Reinhard Schemmel, Tobias Meyer, Florian Eacock, Paul Eichwald,
Simon Althoff, Walter Sextro, Michael Brökelmann, Matthias Hunstig, and Karsten
Guth. “Validated Simulation of the Ultrasonic Wire Bonding Process.” In Wear
Modeling in Copper Wire Wedge Bonding. IEEE CPMT Symposium Japan, 2016, 251–54.
IEEE CPMT Symposium Japan, 2016.
ieee: A. Unger et al., “Validated Simulation of the Ultrasonic Wire Bonding
Process,” in Wear Modeling in Copper Wire Wedge Bonding. IEEE CPMT Symposium
Japan, 2016, 2016, pp. 251–254.
mla: Unger, Andreas, et al. “Validated Simulation of the Ultrasonic Wire Bonding
Process.” Wear Modeling in Copper Wire Wedge Bonding. IEEE CPMT Symposium Japan,
2016, 2016, pp. 251–54.
short: 'A. Unger, R. Schemmel, T. Meyer, F. Eacock, P. Eichwald, S. Althoff, W.
Sextro, M. Brökelmann, M. Hunstig, K. Guth, in: Wear Modeling in Copper Wire Wedge
Bonding. IEEE CPMT Symposium Japan, 2016, IEEE CPMT Symposium Japan, 2016, pp.
251–254.'
date_created: 2019-05-27T09:20:10Z
date_updated: 2020-05-07T05:33:53Z
department:
- _id: '151'
keyword:
- the Ultrasonic Wire Bonding Process
language:
- iso: eng
page: 251-254
place: IEEE CPMT Symposium Japan
project:
- _id: '92'
grant_number: 02 PQ2210
name: Intelligente Herstellung zuverlässiger Kupferbondverbindungen
publication: Wear Modeling in Copper Wire Wedge Bonding. IEEE CPMT Symposium Japan,
2016
quality_controlled: '1'
status: public
title: Validated Simulation of the Ultrasonic Wire Bonding Process
type: conference
user_id: '210'
year: '2016'
...
---
_id: '172'
author:
- first_name: Florian
full_name: Stapel, Florian
last_name: Stapel
citation:
ama: Stapel F. Ontology-Based Representation of Abstract Optimization Models
for Model Formulation and System Generation. Universität Paderborn; 2016.
apa: Stapel, F. (2016). Ontology-based representation of abstract optimization
models for model formulation and system generation. Universität Paderborn.
bibtex: '@book{Stapel_2016, title={Ontology-based representation of abstract optimization
models for model formulation and system generation}, publisher={Universität Paderborn},
author={Stapel, Florian}, year={2016} }'
chicago: Stapel, Florian. Ontology-Based Representation of Abstract Optimization
Models for Model Formulation and System Generation. Universität Paderborn,
2016.
ieee: F. Stapel, Ontology-based representation of abstract optimization models
for model formulation and system generation. Universität Paderborn, 2016.
mla: Stapel, Florian. Ontology-Based Representation of Abstract Optimization
Models for Model Formulation and System Generation. Universität Paderborn,
2016.
short: F. Stapel, Ontology-Based Representation of Abstract Optimization Models
for Model Formulation and System Generation, Universität Paderborn, 2016.
date_created: 2017-10-17T12:41:25Z
date_updated: 2022-01-06T06:53:06Z
ddc:
- '040'
department:
- _id: '19'
file:
- access_level: closed
content_type: application/pdf
creator: florida
date_created: 2018-03-21T12:39:19Z
date_updated: 2018-03-21T12:39:19Z
file_id: '1537'
file_name: 172-FStapelDissertation.pdf
file_size: 9301431
relation: main_file
success: 1
file_date_updated: 2018-03-21T12:39:19Z
has_accepted_license: '1'
project:
- _id: '1'
name: SFB 901
- _id: '15'
name: SFB 901 - Subprojekt C3
- _id: '4'
name: SFB 901 - Project Area C
publisher: Universität Paderborn
status: public
supervisor:
- first_name: Lena
full_name: Suhl, Lena
last_name: Suhl
title: Ontology-based representation of abstract optimization models for model formulation
and system generation
type: dissertation
user_id: '477'
year: '2016'
...
---
_id: '11834'
abstract:
- lang: eng
text: We present a system for the 4th CHiME challenge which significantly increases
the performance for all three tracks with respect to the provided baseline system.
The front-end uses a bi-directional Long Short-Term Memory (BLSTM)-based neural
network to estimate signal statistics. These then steer a Generalized Eigenvalue
beamformer. The back-end consists of a 22 layer deep Wide Residual Network and
two extra BLSTM layers. Working on a whole utterance instead of frames allows
us to refine Batch-Normalization. We also train our own BLSTM-based language model.
Adding a discriminative speaker adaptation leads to further gains. The final system
achieves a word error rate on the six channel real test data of 3.48%. For the
two channel track we achieve 5.96% and for the one channel track 9.34%. This is
the best reported performance on the challenge achieved by a single system, i.e.,
a configuration, which does not combine multiple systems. At the same time, our
system is independent of the microphone configuration. We can thus use the same
components for all three tracks.
author:
- first_name: Jahn
full_name: Heymann, Jahn
id: '9168'
last_name: Heymann
- first_name: Lukas
full_name: Drude, Lukas
id: '11213'
last_name: Drude
- first_name: Reinhold
full_name: Haeb-Umbach, Reinhold
id: '242'
last_name: Haeb-Umbach
citation:
ama: 'Heymann J, Drude L, Haeb-Umbach R. Wide Residual BLSTM Network with Discriminative
Speaker Adaptation for Robust Speech Recognition. In: Computer Speech and Language.
; 2016.'
apa: Heymann, J., Drude, L., & Haeb-Umbach, R. (2016). Wide Residual BLSTM Network
with Discriminative Speaker Adaptation for Robust Speech Recognition. In Computer
Speech and Language.
bibtex: '@inproceedings{Heymann_Drude_Haeb-Umbach_2016, title={Wide Residual BLSTM
Network with Discriminative Speaker Adaptation for Robust Speech Recognition},
booktitle={Computer Speech and Language}, author={Heymann, Jahn and Drude, Lukas
and Haeb-Umbach, Reinhold}, year={2016} }'
chicago: Heymann, Jahn, Lukas Drude, and Reinhold Haeb-Umbach. “Wide Residual BLSTM
Network with Discriminative Speaker Adaptation for Robust Speech Recognition.”
In Computer Speech and Language, 2016.
ieee: J. Heymann, L. Drude, and R. Haeb-Umbach, “Wide Residual BLSTM Network with
Discriminative Speaker Adaptation for Robust Speech Recognition,” in Computer
Speech and Language, 2016.
mla: Heymann, Jahn, et al. “Wide Residual BLSTM Network with Discriminative Speaker
Adaptation for Robust Speech Recognition.” Computer Speech and Language,
2016.
short: 'J. Heymann, L. Drude, R. Haeb-Umbach, in: Computer Speech and Language,
2016.'
date_created: 2019-07-12T05:29:09Z
date_updated: 2022-01-06T06:51:11Z
department:
- _id: '54'
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://groups.uni-paderborn.de/nt/pubs/2016/chime4_upbonly_paper.pdf
oa: '1'
publication: Computer Speech and Language
related_material:
link:
- description: Poster
relation: supplementary_material
url: https://groups.uni-paderborn.de/nt/pubs/2016/chime4_upbonly_poster.pdf
status: public
title: Wide Residual BLSTM Network with Discriminative Speaker Adaptation for Robust
Speech Recognition
type: conference
user_id: '44006'
year: '2016'
...
---
_id: '157'
abstract:
- lang: eng
text: Consider a scheduling problem in which a set of jobs with interjob communication,
canonically represented by a weighted tree, needs to be scheduled on m parallel
processors interconnected by a shared communication channel. In each time step,
we may allow any processed job to use a certain capacity of the channel in order
to satisfy (parts of) its communication demands to adjacent jobs processed in
parallel. The goal is to find a schedule that minimizes the makespan and in which
communication demands of all jobs are satisfied.We show that this problem is NP-hard
in the strong sense even if the number of processors and the maximum degree of
the underlying tree is constant.Consequently, we design and analyze simple approximation
algorithms with asymptotic approximation ratio 2-2/m in case of paths and a ratio
of 5/2 in case of arbitrary trees.
author:
- first_name: Jürgen
full_name: König, Jürgen
last_name: König
- first_name: Alexander
full_name: Mäcker, Alexander
id: '13536'
last_name: Mäcker
- first_name: Friedhelm
full_name: Meyer auf der Heide, Friedhelm
id: '15523'
last_name: Meyer auf der Heide
- first_name: Sören
full_name: Riechers, Sören
last_name: Riechers
citation:
ama: 'König J, Mäcker A, Meyer auf der Heide F, Riechers S. Scheduling with Interjob
Communication on Parallel Processors. In: Proceedings of the 10th Annual International
Conference on Combinatorial Optimization and Applications (COCOA). LNCS. ;
2016:563--577. doi:10.1007/978-3-319-48749-6_41'
apa: König, J., Mäcker, A., Meyer auf der Heide, F., & Riechers, S. (2016).
Scheduling with Interjob Communication on Parallel Processors. In Proceedings
of the 10th Annual International Conference on Combinatorial Optimization and
Applications (COCOA) (pp. 563--577). https://doi.org/10.1007/978-3-319-48749-6_41
bibtex: '@inproceedings{König_Mäcker_Meyer auf der Heide_Riechers_2016, series={LNCS},
title={Scheduling with Interjob Communication on Parallel Processors}, DOI={10.1007/978-3-319-48749-6_41},
booktitle={Proceedings of the 10th Annual International Conference on Combinatorial
Optimization and Applications (COCOA)}, author={König, Jürgen and Mäcker, Alexander
and Meyer auf der Heide, Friedhelm and Riechers, Sören}, year={2016}, pages={563--577},
collection={LNCS} }'
chicago: König, Jürgen, Alexander Mäcker, Friedhelm Meyer auf der Heide, and Sören
Riechers. “Scheduling with Interjob Communication on Parallel Processors.” In
Proceedings of the 10th Annual International Conference on Combinatorial Optimization
and Applications (COCOA), 563--577. LNCS, 2016. https://doi.org/10.1007/978-3-319-48749-6_41.
ieee: J. König, A. Mäcker, F. Meyer auf der Heide, and S. Riechers, “Scheduling
with Interjob Communication on Parallel Processors,” in Proceedings of the
10th Annual International Conference on Combinatorial Optimization and Applications
(COCOA), 2016, pp. 563--577.
mla: König, Jürgen, et al. “Scheduling with Interjob Communication on Parallel Processors.”
Proceedings of the 10th Annual International Conference on Combinatorial Optimization
and Applications (COCOA), 2016, pp. 563--577, doi:10.1007/978-3-319-48749-6_41.
short: 'J. König, A. Mäcker, F. Meyer auf der Heide, S. Riechers, in: Proceedings
of the 10th Annual International Conference on Combinatorial Optimization and
Applications (COCOA), 2016, pp. 563--577.'
date_created: 2017-10-17T12:41:22Z
date_updated: 2022-01-06T06:52:32Z
ddc:
- '040'
department:
- _id: '63'
doi: 10.1007/978-3-319-48749-6_41
file:
- access_level: closed
content_type: application/pdf
creator: florida
date_created: 2018-03-21T12:50:29Z
date_updated: 2018-03-21T12:50:29Z
file_id: '1549'
file_name: 157-chp_3A10.1007_2F978-3-319-48749-6_41.pdf
file_size: 753147
relation: main_file
success: 1
file_date_updated: 2018-03-21T12:50:29Z
has_accepted_license: '1'
page: 563--577
project:
- _id: '1'
name: SFB 901
- _id: '16'
name: SFB 901 - Subprojekt C4
- _id: '4'
name: SFB 901 - Project Area C
publication: Proceedings of the 10th Annual International Conference on Combinatorial
Optimization and Applications (COCOA)
series_title: LNCS
status: public
title: Scheduling with Interjob Communication on Parallel Processors
type: conference
user_id: '15504'
year: '2016'
...
---
_id: '149'
abstract:
- lang: eng
text: 'In this paper we consider a strategic variant of the online facility location
problem. Given is a graph in which each node serves two roles: it is a strategic
client stating requests as well as a potential location for a facility. In each
time step one client states a request which induces private costs equal to the
distance to the closest facility. Before serving, the clients may collectively
decide to open new facilities, sharing the corresponding price. Instead of optimizing
the global costs, each client acts selfishly. The prices of new facilities vary
between nodes and also change over time, but are always bounded by some fixed
value α. Both the requests as well as the facility prices are given by an online
sequence and are not known in advance.We characterize the optimal strategies of
the clients and analyze their overall performance in comparison to a centralized
offline solution. If all players optimize their own competitiveness, the global
performance of the system is O(√α⋅α) times worse than the offline optimum. A restriction
to a natural subclass of strategies improves this result to O(α). We also show
that for fixed facility costs, we can find strategies such that this bound further
improves to O(√α).'
author:
- first_name: Maximilian
full_name: Drees, Maximilian
last_name: Drees
- first_name: Björn
full_name: Feldkord, Björn
id: '22704'
last_name: Feldkord
- first_name: Alexander
full_name: Skopalik, Alexander
id: '40384'
last_name: Skopalik
citation:
ama: 'Drees M, Feldkord B, Skopalik A. Strategic Online Facility Location. In: Proceedings
of the 10th Annual International Conference on Combinatorial Optimization and
Applications (COCOA). LNCS. ; 2016:593--607. doi:10.1007/978-3-319-48749-6_43'
apa: Drees, M., Feldkord, B., & Skopalik, A. (2016). Strategic Online Facility
Location. In Proceedings of the 10th Annual International Conference on Combinatorial
Optimization and Applications (COCOA) (pp. 593--607). https://doi.org/10.1007/978-3-319-48749-6_43
bibtex: '@inproceedings{Drees_Feldkord_Skopalik_2016, series={LNCS}, title={Strategic
Online Facility Location}, DOI={10.1007/978-3-319-48749-6_43},
booktitle={Proceedings of the 10th Annual International Conference on Combinatorial
Optimization and Applications (COCOA)}, author={Drees, Maximilian and Feldkord,
Björn and Skopalik, Alexander}, year={2016}, pages={593--607}, collection={LNCS}
}'
chicago: Drees, Maximilian, Björn Feldkord, and Alexander Skopalik. “Strategic Online
Facility Location.” In Proceedings of the 10th Annual International Conference
on Combinatorial Optimization and Applications (COCOA), 593--607. LNCS, 2016.
https://doi.org/10.1007/978-3-319-48749-6_43.
ieee: M. Drees, B. Feldkord, and A. Skopalik, “Strategic Online Facility Location,”
in Proceedings of the 10th Annual International Conference on Combinatorial
Optimization and Applications (COCOA), 2016, pp. 593--607.
mla: Drees, Maximilian, et al. “Strategic Online Facility Location.” Proceedings
of the 10th Annual International Conference on Combinatorial Optimization and
Applications (COCOA), 2016, pp. 593--607, doi:10.1007/978-3-319-48749-6_43.
short: 'M. Drees, B. Feldkord, A. Skopalik, in: Proceedings of the 10th Annual International
Conference on Combinatorial Optimization and Applications (COCOA), 2016, pp. 593--607.'
date_created: 2017-10-17T12:41:21Z
date_updated: 2022-01-06T06:52:10Z
ddc:
- '040'
department:
- _id: '63'
- _id: '541'
doi: 10.1007/978-3-319-48749-6_43
file:
- access_level: closed
content_type: application/pdf
creator: florida
date_created: 2018-03-21T12:55:43Z
date_updated: 2018-03-21T12:55:43Z
file_id: '1553'
file_name: 149-chp_3A10.1007_2F978-3-319-48749-6_43.pdf
file_size: 236253
relation: main_file
success: 1
file_date_updated: 2018-03-21T12:55:43Z
has_accepted_license: '1'
language:
- iso: eng
page: 593--607
project:
- _id: '1'
name: SFB 901
- _id: '5'
name: SFB 901 - Subprojekt A1
- _id: '7'
name: SFB 901 - Subproject A3
- _id: '2'
name: SFB 901 - Project Area A
publication: Proceedings of the 10th Annual International Conference on Combinatorial
Optimization and Applications (COCOA)
series_title: LNCS
status: public
title: Strategic Online Facility Location
type: conference
user_id: '477'
year: '2016'
...
---
_id: '139'
abstract:
- lang: eng
text: 'We consider online optimization problems in which certain goods have to be
acquired in order to provide a service or infrastructure. Classically, decisions
for such problems are considered as final: one buys the goods. However, in many
real world applications, there is a shift away from the idea of buying goods.
Instead, leasing is often a more flexible and lucrative business model. Research
has realized this shift and recently initiated the theoretical study of leasing
models (Anthony and Gupta in Proceedings of the integer programming and combinatorial
optimization: 12th International IPCO Conference, Ithaca, NY, USA, June 25–27,
2007; Meyerson in Proceedings of the 46th Annual IEEE Symposium on Foundations
of Computer Science (FOCS 2005), 23–25 Oct 2005, Pittsburgh, PA, USA, 2005; Nagarajan
and Williamson in Discret Optim 10(4):361–370, 2013) We extend this line of work
and suggest a more systematic study of leasing aspects for a class of online optimization
problems. We provide two major technical results. We introduce the leasing variant
of online set multicover and give an O(log(mK)logn)-competitive algorithm (with
n, m, and K being the number of elements, sets, and leases, respectively). Our
results also imply improvements for the non-leasing variant of online set cover.
Moreover, we extend results for the leasing variant of online facility location.
Nagarajan and Williamson (Discret Optim 10(4):361–370, 2013) gave an O(Klogn)-competitive
algorithm for this problem (with n and K being the number of clients and leases,
respectively). We remove the dependency on n (and, thereby, on time). In general,
this leads to a bound of O(lmaxloglmax) (with the maximal lease length lmax).
For many natural problem instances, the bound improves to O(K2).'
author:
- first_name: Sebastian
full_name: Abshoff, Sebastian
last_name: Abshoff
- first_name: Peter
full_name: Kling, Peter
last_name: Kling
- first_name: Christine
full_name: Markarian, Christine
id: '37612'
last_name: Markarian
- first_name: Friedhelm
full_name: Meyer auf der Heide, Friedhelm
id: '15523'
last_name: Meyer auf der Heide
- first_name: 'Peter '
full_name: 'Pietrzyk, Peter '
last_name: Pietrzyk
citation:
ama: Abshoff S, Kling P, Markarian C, Meyer auf der Heide F, Pietrzyk P. Towards
the price of leasing online. Journal of Combinatorial Optimization. 2016;(4):1197--1216.
doi:10.1007/s10878-015-9915-5
apa: Abshoff, S., Kling, P., Markarian, C., Meyer auf der Heide, F., & Pietrzyk,
P. (2016). Towards the price of leasing online. Journal of Combinatorial Optimization,
(4), 1197--1216. https://doi.org/10.1007/s10878-015-9915-5
bibtex: '@article{Abshoff_Kling_Markarian_Meyer auf der Heide_Pietrzyk_2016, title={Towards
the price of leasing online}, DOI={10.1007/s10878-015-9915-5},
number={4}, journal={Journal of Combinatorial Optimization}, publisher={Springer},
author={Abshoff, Sebastian and Kling, Peter and Markarian, Christine and Meyer
auf der Heide, Friedhelm and Pietrzyk, Peter }, year={2016}, pages={1197--1216}
}'
chicago: 'Abshoff, Sebastian, Peter Kling, Christine Markarian, Friedhelm Meyer
auf der Heide, and Peter Pietrzyk. “Towards the Price of Leasing Online.” Journal
of Combinatorial Optimization, no. 4 (2016): 1197--1216. https://doi.org/10.1007/s10878-015-9915-5.'
ieee: S. Abshoff, P. Kling, C. Markarian, F. Meyer auf der Heide, and P. Pietrzyk,
“Towards the price of leasing online,” Journal of Combinatorial Optimization,
no. 4, pp. 1197--1216, 2016.
mla: Abshoff, Sebastian, et al. “Towards the Price of Leasing Online.” Journal
of Combinatorial Optimization, no. 4, Springer, 2016, pp. 1197--1216, doi:10.1007/s10878-015-9915-5.
short: S. Abshoff, P. Kling, C. Markarian, F. Meyer auf der Heide, P. Pietrzyk,
Journal of Combinatorial Optimization (2016) 1197--1216.
date_created: 2017-10-17T12:41:18Z
date_updated: 2022-01-06T06:51:46Z
ddc:
- '000'
department:
- _id: '63'
doi: 10.1007/s10878-015-9915-5
file:
- access_level: closed
content_type: application/pdf
creator: ups
date_created: 2018-11-02T15:57:25Z
date_updated: 2018-11-02T15:57:25Z
file_id: '5318'
file_name: Abshoff-TowardsThePriceOfLeasingOnline.pdf
file_size: 654903
relation: main_file
success: 1
file_date_updated: 2018-11-02T15:57:25Z
has_accepted_license: '1'
issue: '4'
language:
- iso: eng
page: ' 1197--1216'
project:
- _id: '1'
name: SFB 901
- _id: '5'
name: SFB 901 - Subprojekt A1
- _id: '16'
name: SFB 901 - Subprojekt C4
- _id: '2'
name: SFB 901 - Project Area A
- _id: '4'
name: SFB 901 - Project Area C
publication: Journal of Combinatorial Optimization
publisher: Springer
status: public
title: Towards the price of leasing online
type: journal_article
user_id: '477'
year: '2016'
...
---
_id: '144'
abstract:
- lang: eng
text: 'Following the direction pioneered by Fiat and Papadimitriou in their 2010
paper [12], we study the complexity of deciding the existence of mixed equilibria
for minimization games where players use valuations other than expectation to
evaluate their costs. We consider risk-averse players seeking to minimize the
sum V=E+R of expectationE and a risk valuationR of their costs; R is non-negative
and vanishes exactly when the cost incurred to a player is constant over all choices
of strategies by the other players. In a V-equilibrium, no player could unilaterally
reduce her cost.Say that V has the Weak-Equilibrium-for-Expectation property if
all strategies supported in a player''s best-response mixed strategy incur the
same conditional expectation of her cost. We introduce E-strict concavity and
observe that every E-strictly concave valuation has the Weak-Equilibrium-for-Expectation
property. We focus on a broad class of valuations shown to have the Weak-Equilibrium-for-Expectation
property, which we exploit to prove two main complexity results, the first of
their kind, for the two simplest cases of the problem:• Two strategies: Deciding
the existence of a V-equilibrium is strongly NP-hard for the restricted class
of player-specific scheduling games on two ordered links [22], when choosing R
as (1)Var (variance), or (2)SD (standard deviation), or (3) a concave linear sum
of even moments of small order.• Two players: Deciding the existence of a V-equilibrium
is strongly NP-hard when choosing R as (1)γ⋅Var, or (2)γ⋅SD, where γ>0 is the
risk-coefficient, or choosing V as (3) a convex combination of E+γ⋅Var and the
concave ν-valuationν−1(E(ν(⋅))), where ν(x)=xr, with r≥2. This is a concrete consequence
of a general strong NP-hardness result that only needs the Weak-Equilibrium-for-Expectation
property and a few additional properties for V; its proof involves a reduction
with a single parameter, which can be chosen efficiently so that each valuation
satisfies the additional properties.'
author:
- first_name: Burkhard
full_name: Monien, Burkhard
last_name: Monien
- first_name: Marios
full_name: Mavronicolas, Marios
last_name: Mavronicolas
citation:
ama: Monien B, Mavronicolas M. The complexity of equilibria for risk-modeling valuations.
Theoretical Computer Science. 2016;634:67-96. doi:10.1016/j.tcs.2016.04.013
apa: Monien, B., & Mavronicolas, M. (2016). The complexity of equilibria for
risk-modeling valuations. Theoretical Computer Science, 634, 67–96.
https://doi.org/10.1016/j.tcs.2016.04.013
bibtex: '@article{Monien_Mavronicolas_2016, title={The complexity of equilibria
for risk-modeling valuations}, volume={634}, DOI={10.1016/j.tcs.2016.04.013},
journal={Theoretical Computer Science}, publisher={Elsevier}, author={Monien,
Burkhard and Mavronicolas, Marios}, year={2016}, pages={67–96} }'
chicago: 'Monien, Burkhard, and Marios Mavronicolas. “The Complexity of Equilibria
for Risk-Modeling Valuations.” Theoretical Computer Science 634 (2016):
67–96. https://doi.org/10.1016/j.tcs.2016.04.013.'
ieee: B. Monien and M. Mavronicolas, “The complexity of equilibria for risk-modeling
valuations,” Theoretical Computer Science, vol. 634, pp. 67–96, 2016.
mla: Monien, Burkhard, and Marios Mavronicolas. “The Complexity of Equilibria for
Risk-Modeling Valuations.” Theoretical Computer Science, vol. 634, Elsevier,
2016, pp. 67–96, doi:10.1016/j.tcs.2016.04.013.
short: B. Monien, M. Mavronicolas, Theoretical Computer Science 634 (2016) 67–96.
date_created: 2017-10-17T12:41:20Z
date_updated: 2022-01-06T06:51:59Z
ddc:
- '040'
doi: 10.1016/j.tcs.2016.04.013
file:
- access_level: closed
content_type: application/pdf
creator: florida
date_created: 2018-03-21T12:58:42Z
date_updated: 2018-03-21T12:58:42Z
file_id: '1557'
file_name: 144-Monien_Mavronicolas-TCS2016_01.pdf
file_size: 633599
relation: main_file
success: 1
file_date_updated: 2018-03-21T12:58:42Z
has_accepted_license: '1'
intvolume: ' 634'
language:
- iso: eng
page: 67-96
project:
- _id: '1'
name: SFB 901
- _id: '7'
name: SFB 901 - Subprojekt A3
- _id: '2'
name: SFB 901 - Project Area A
publication: Theoretical Computer Science
publisher: Elsevier
status: public
title: The complexity of equilibria for risk-modeling valuations
type: journal_article
user_id: '42447'
volume: 634
year: '2016'
...
---
_id: '29962'
author:
- first_name: Karl Stephan Christian
full_name: Stille, Karl Stephan Christian
id: '30152'
last_name: Stille
orcid: 0000-0002-4212-6555
- first_name: Joachim
full_name: Böcker, Joachim
id: '66'
last_name: Böcker
orcid: 0000-0002-8480-7295
- first_name: Norbert
full_name: Fröhleke, Norbert
last_name: Fröhleke
- first_name: Ralf
full_name: Bettentrup, Ralf
last_name: Bettentrup
- first_name: Ingo
full_name: Kaiser, Ingo
last_name: Kaiser
citation:
ama: 'Stille KSC, Böcker J, Fröhleke N, Bettentrup R, Kaiser I. Integration of home
photovoltaic generation into electricity tariff for load optimization. In: 2016
4th International Istanbul Smart Grid Congress and Fair (ICSG). IEEE; 2016.
doi:10.1109/sgcf.2016.7492441'
apa: Stille, K. S. C., Böcker, J., Fröhleke, N., Bettentrup, R., & Kaiser, I.
(2016). Integration of home photovoltaic generation into electricity tariff for
load optimization. 2016 4th International Istanbul Smart Grid Congress and
Fair (ICSG). https://doi.org/10.1109/sgcf.2016.7492441
bibtex: '@inproceedings{Stille_Böcker_Fröhleke_Bettentrup_Kaiser_2016, title={Integration
of home photovoltaic generation into electricity tariff for load optimization},
DOI={10.1109/sgcf.2016.7492441},
booktitle={2016 4th International Istanbul Smart Grid Congress and Fair (ICSG)},
publisher={IEEE}, author={Stille, Karl Stephan Christian and Böcker, Joachim and
Fröhleke, Norbert and Bettentrup, Ralf and Kaiser, Ingo}, year={2016} }'
chicago: Stille, Karl Stephan Christian, Joachim Böcker, Norbert Fröhleke, Ralf
Bettentrup, and Ingo Kaiser. “Integration of Home Photovoltaic Generation into
Electricity Tariff for Load Optimization.” In 2016 4th International Istanbul
Smart Grid Congress and Fair (ICSG). IEEE, 2016. https://doi.org/10.1109/sgcf.2016.7492441.
ieee: 'K. S. C. Stille, J. Böcker, N. Fröhleke, R. Bettentrup, and I. Kaiser, “Integration
of home photovoltaic generation into electricity tariff for load optimization,”
2016, doi: 10.1109/sgcf.2016.7492441.'
mla: Stille, Karl Stephan Christian, et al. “Integration of Home Photovoltaic Generation
into Electricity Tariff for Load Optimization.” 2016 4th International Istanbul
Smart Grid Congress and Fair (ICSG), IEEE, 2016, doi:10.1109/sgcf.2016.7492441.
short: 'K.S.C. Stille, J. Böcker, N. Fröhleke, R. Bettentrup, I. Kaiser, in: 2016
4th International Istanbul Smart Grid Congress and Fair (ICSG), IEEE, 2016.'
date_created: 2022-02-23T09:12:00Z
date_updated: 2022-02-23T09:43:40Z
department:
- _id: '52'
doi: 10.1109/sgcf.2016.7492441
language:
- iso: eng
publication: 2016 4th International Istanbul Smart Grid Congress and Fair (ICSG)
publication_status: published
publisher: IEEE
status: public
title: Integration of home photovoltaic generation into electricity tariff for load
optimization
type: conference
user_id: '66'
year: '2016'
...
---
_id: '29960'
author:
- first_name: Karl Stephan Christian
full_name: Stille, Karl Stephan Christian
id: '30152'
last_name: Stille
orcid: 0000-0002-4212-6555
- first_name: Joachim
full_name: Böcker, Joachim
id: '66'
last_name: Böcker
orcid: 0000-0002-8480-7295
- first_name: Norbert
full_name: Fröhleke, Norbert
last_name: Fröhleke
- first_name: Ralf
full_name: Bettentrup, Ralf
last_name: Bettentrup
- first_name: Ingo
full_name: Kaiser, Ingo
last_name: Kaiser
citation:
ama: 'Stille KSC, Böcker J, Fröhleke N, Bettentrup R, Kaiser I. Supervisional load
optimization for households with intelligent domestic appliances. In: 2016
10th International Conference on Compatibility, Power Electronics and Power Engineering
(CPE-POWERENG). IEEE; 2016. doi:10.1109/cpe.2016.7544176'
apa: Stille, K. S. C., Böcker, J., Fröhleke, N., Bettentrup, R., & Kaiser, I.
(2016). Supervisional load optimization for households with intelligent domestic
appliances. 2016 10th International Conference on Compatibility, Power Electronics
and Power Engineering (CPE-POWERENG). https://doi.org/10.1109/cpe.2016.7544176
bibtex: '@inproceedings{Stille_Böcker_Fröhleke_Bettentrup_Kaiser_2016, title={Supervisional
load optimization for households with intelligent domestic appliances}, DOI={10.1109/cpe.2016.7544176},
booktitle={2016 10th International Conference on Compatibility, Power Electronics
and Power Engineering (CPE-POWERENG)}, publisher={IEEE}, author={Stille, Karl
Stephan Christian and Böcker, Joachim and Fröhleke, Norbert and Bettentrup, Ralf
and Kaiser, Ingo}, year={2016} }'
chicago: Stille, Karl Stephan Christian, Joachim Böcker, Norbert Fröhleke, Ralf
Bettentrup, and Ingo Kaiser. “Supervisional Load Optimization for Households with
Intelligent Domestic Appliances.” In 2016 10th International Conference on
Compatibility, Power Electronics and Power Engineering (CPE-POWERENG). IEEE,
2016. https://doi.org/10.1109/cpe.2016.7544176.
ieee: 'K. S. C. Stille, J. Böcker, N. Fröhleke, R. Bettentrup, and I. Kaiser, “Supervisional
load optimization for households with intelligent domestic appliances,” 2016,
doi: 10.1109/cpe.2016.7544176.'
mla: Stille, Karl Stephan Christian, et al. “Supervisional Load Optimization for
Households with Intelligent Domestic Appliances.” 2016 10th International Conference
on Compatibility, Power Electronics and Power Engineering (CPE-POWERENG),
IEEE, 2016, doi:10.1109/cpe.2016.7544176.
short: 'K.S.C. Stille, J. Böcker, N. Fröhleke, R. Bettentrup, I. Kaiser, in: 2016
10th International Conference on Compatibility, Power Electronics and Power Engineering
(CPE-POWERENG), IEEE, 2016.'
date_created: 2022-02-23T09:11:10Z
date_updated: 2022-02-23T10:06:56Z
department:
- _id: '52'
doi: 10.1109/cpe.2016.7544176
language:
- iso: eng
publication: 2016 10th International Conference on Compatibility, Power Electronics
and Power Engineering (CPE-POWERENG)
publication_status: published
publisher: IEEE
status: public
title: Supervisional load optimization for households with intelligent domestic appliances
type: conference
user_id: '66'
year: '2016'
...
---
_id: '30607'
author:
- first_name: Carsten
full_name: Henkenius, Carsten
last_name: Henkenius
- first_name: Norbert
full_name: Fröhleke, Norbert
last_name: Fröhleke
- first_name: Joachim
full_name: Böcker, Joachim
id: '66'
last_name: Böcker
orcid: 0000-0002-8480-7295
- first_name: Heiko
full_name: Figge, Heiko
last_name: Figge
citation:
ama: 'Henkenius C, Fröhleke N, Böcker J, Figge H. Numerical optimization of passive
line filter components for suppression of electromagnetic interference (EMI).
In: 2016 IEEE Applied Power Electronics Conference and Exposition (APEC).
IEEE; 2016. doi:10.1109/apec.2016.7468073'
apa: Henkenius, C., Fröhleke, N., Böcker, J., & Figge, H. (2016). Numerical
optimization of passive line filter components for suppression of electromagnetic
interference (EMI). 2016 IEEE Applied Power Electronics Conference and Exposition
(APEC). https://doi.org/10.1109/apec.2016.7468073
bibtex: '@inproceedings{Henkenius_Fröhleke_Böcker_Figge_2016, title={Numerical optimization
of passive line filter components for suppression of electromagnetic interference
(EMI)}, DOI={10.1109/apec.2016.7468073},
booktitle={2016 IEEE Applied Power Electronics Conference and Exposition (APEC)},
publisher={IEEE}, author={Henkenius, Carsten and Fröhleke, Norbert and Böcker,
Joachim and Figge, Heiko}, year={2016} }'
chicago: Henkenius, Carsten, Norbert Fröhleke, Joachim Böcker, and Heiko Figge.
“Numerical Optimization of Passive Line Filter Components for Suppression of Electromagnetic
Interference (EMI).” In 2016 IEEE Applied Power Electronics Conference and
Exposition (APEC). IEEE, 2016. https://doi.org/10.1109/apec.2016.7468073.
ieee: 'C. Henkenius, N. Fröhleke, J. Böcker, and H. Figge, “Numerical optimization
of passive line filter components for suppression of electromagnetic interference
(EMI),” 2016, doi: 10.1109/apec.2016.7468073.'
mla: Henkenius, Carsten, et al. “Numerical Optimization of Passive Line Filter Components
for Suppression of Electromagnetic Interference (EMI).” 2016 IEEE Applied Power
Electronics Conference and Exposition (APEC), IEEE, 2016, doi:10.1109/apec.2016.7468073.
short: 'C. Henkenius, N. Fröhleke, J. Böcker, H. Figge, in: 2016 IEEE Applied Power
Electronics Conference and Exposition (APEC), IEEE, 2016.'
date_created: 2022-03-28T08:00:21Z
date_updated: 2022-03-28T08:55:16Z
department:
- _id: '52'
doi: 10.1109/apec.2016.7468073
language:
- iso: eng
publication: 2016 IEEE Applied Power Electronics Conference and Exposition (APEC)
publication_status: published
publisher: IEEE
status: public
title: Numerical optimization of passive line filter components for suppression of
electromagnetic interference (EMI)
type: conference
user_id: '66'
year: '2016'
...