@article{53163,
  abstract     = {{<jats:p>An SPR-based dually crosslinked gel sensor for adiponitrile bearing pillar[5]arene responsive sites with a low limit of detection was developed.</jats:p>}},
  author       = {{Rodin, Maksim and Helle, David and Kuckling, Dirk}},
  issn         = {{1759-9954}},
  journal      = {{Polymer Chemistry}},
  keywords     = {{Organic Chemistry, Polymers and Plastics, Biochemistry, Bioengineering}},
  number       = {{7}},
  pages        = {{661--679}},
  publisher    = {{Royal Society of Chemistry (RSC)}},
  title        = {{{Pillar[5]arene-based dually crosslinked supramolecular gel as a sensor for the detection of adiponitrile}}},
  doi          = {{10.1039/d3py01354e}},
  volume       = {{15}},
  year         = {{2024}},
}

@article{47992,
  abstract     = {{Ferroelectric domain boundaries are quasi-two-dimensional functional interfaces with high prospects for nanoelectronic applications. Despite their reduced dimensionality, they can exhibit complex non-Ising polarization configurations and unexpected physical properties. Here, the impact of the three-dimensional (3D) curvature on the polarization profile of nominally uncharged 180° domain walls in LiNbO3 is studied using second-harmonic generation microscopy and 3D polarimetry analysis. Correlations between the domain-wall curvature and the variation of its internal polarization unfold in the form of modulations of the Néel-like character, which we attribute to the flexoelectric effect. While the Néel-like character originates mainly from the tilting of the domain wall, the internal polarization adjusts its orientation due to the synergetic upshot of dipolar and monopolar bound charges and their variation with the 3D curvature. Our results show that curved interfaces in solid crystals may offer a rich playground for tailoring nanoscale polar states.}},
  author       = {{Acevedo-Salas, Ulises and Croes, Boris and Zhang, Yide and Cregut, Olivier and Dorkenoo, Kokou Dodzi and Kirbus, Benjamin and Singh, Ekta and Beccard, Henrik and Rüsing, Michael and Eng, Lukas M. and Hertel, Riccardo and Eliseev, Eugene A. and Morozovska, Anna N. and Cherifi-Hertel, Salia}},
  issn         = {{1530-6984}},
  journal      = {{Nano Letters}},
  keywords     = {{Mechanical Engineering, Condensed Matter Physics, General Materials Science, General Chemistry, Bioengineering}},
  number       = {{3}},
  pages        = {{795--803}},
  publisher    = {{American Chemical Society (ACS)}},
  title        = {{{Impact of 3D Curvature on the Polarization Orientation in Non-Ising Domain Walls}}},
  doi          = {{10.1021/acs.nanolett.2c03579}},
  volume       = {{23}},
  year         = {{2023}},
}

@article{49580,
  abstract     = {{<jats:title>Abstract</jats:title><jats:p>The time‐dependent adjustment of a system's power demand simultaneously with current power generation is commonly referred to as demand side management (DSM). DSM strategies are based on the flexibility to purchase electricity at times when prices are low, which can result in monetary benefits. One option to increase the flexibility of continuously operated processes is to oversize them. From an economic point of view, this leads to an increased investment. DSM only serves an economic purpose if the monetary benefits exceed this increase in capital costs. The main goal of this contribution is to develop a decision support tool to help evaluate unit operations regarding their feasibility for DSM implementation. In a case study, the decision support tool was applied to show its functionality on a biomethane production plant. The results show that with the help of the decision support tool, evaluating unit operations concerning their economic DSM potential is possible.</jats:p>}},
  author       = {{Röder, Lilli and Etzold, Hendrik and Gröngröft, Arne and Grünewald, Marcus and Riese, Julia}},
  issn         = {{1932-104X}},
  journal      = {{Biofuels, Bioproducts and Biorefining}},
  keywords     = {{Renewable Energy, Sustainability and the Environment, Bioengineering}},
  publisher    = {{Wiley}},
  title        = {{{Decision support tool to determine the suitability of demand side management implementation in continuously operated processes – A biorefinery case study}}},
  doi          = {{10.1002/bbb.2558}},
  year         = {{2023}},
}

@article{33447,
  author       = {{Julin, Sofia and Keller, Adrian and Linko, Veikko}},
  issn         = {{1043-1802}},
  journal      = {{Bioconjugate Chemistry}},
  keywords     = {{Organic Chemistry, Pharmaceutical Science, Pharmacology, Biomedical Engineering, Bioengineering, Biotechnology}},
  pages        = {{18--29}},
  publisher    = {{American Chemical Society (ACS)}},
  title        = {{{Dynamics of DNA Origami Lattices}}},
  doi          = {{10.1021/acs.bioconjchem.2c00359}},
  volume       = {{34}},
  year         = {{2023}},
}

@article{43457,
  abstract     = {{The production of hydrogen and the utilization of biomass for sustainable concepts of energy conversion and storage require gas sensors that discriminate between hydrogen (H2) and carbon monoxide (CO). Mesoporous copper–ceria (Cu–CeO2) materials with large specific surface areas and uniform porosity are prepared by nanocasting, and their textural properties are characterized by N2 physisorption, powder XRD, scanning electron microscopy, transmission electron microscopy, and energy-dispersive X-ray spectroscopy. The oxidation states of copper (Cu+, Cu2+) and cerium (Ce3+, Ce4+) are investigated by XPS. The materials are used as resistive gas sensors for H2 and CO. The sensors show a stronger response to CO than to H2 and low cross-sensitivity to humidity. Copper turns out to be a necessary component; copper-free ceria materials prepared by the same method show only poor sensing performance. By measuring both gases (CO and H2) simultaneously, it is shown that this behavior can be utilized for selective sensing of CO in the presence of H2.}},
  author       = {{Baier, Dominik and Priamushko, Tatiana and Weinberger, Christian and Kleitz, Freddy and Tiemann, Michael}},
  issn         = {{2379-3694}},
  journal      = {{ACS Sensors}},
  keywords     = {{Fluid Flow and Transfer Processes, Process Chemistry and Technology, Instrumentation, Bioengineering}},
  number       = {{4}},
  pages        = {{1616 -- 1623}},
  publisher    = {{American Chemical Society (ACS)}},
  title        = {{{Selective Discrimination between CO and H2 with Copper–Ceria-Resistive Gas Sensors}}},
  doi          = {{10.1021/acssensors.2c02739}},
  volume       = {{8}},
  year         = {{2023}},
}

@article{44044,
  abstract     = {{Dispersion is present in every optical setup and is often an undesired effect, especially in nonlinear-optical experiments where ultrashort laser pulses are needed. Typically, bulky pulse compressors consisting of gratings or prisms are used
to address this issue by precompensating the dispersion of the optical components. However, these devices are only able to compensate for a part of the dispersion (second-order dispersion). Here, we present a compact pulse-shaping device that uses plasmonic metasurfaces to apply an arbitrarily designed spectral phase delay allowing for a full dispersion control. Furthermore, with specific phase encodings, this device can be used to temporally reshape the incident laser pulses into more complex pulse forms such as a double pulse. We verify the performance of our device by using an SHG-FROG measurement setup together with a retrieval algorithm to extract the dispersion that our device applies to an incident laser pulse.}},
  author       = {{Geromel, René and Georgi, Philip and Protte, Maximilian and Lei, Shiwei and Bartley, Tim and Huang, Lingling and Zentgraf, Thomas}},
  issn         = {{1530-6984}},
  journal      = {{Nano Letters}},
  keywords     = {{Mechanical Engineering, Condensed Matter Physics, General Materials Science, General Chemistry, Bioengineering}},
  number       = {{8}},
  pages        = {{3196 -- 3201}},
  publisher    = {{American Chemical Society (ACS)}},
  title        = {{{Compact Metasurface-Based Optical Pulse-Shaping Device}}},
  doi          = {{10.1021/acs.nanolett.2c04980}},
  volume       = {{23}},
  year         = {{2023}},
}

@article{35642,
  abstract     = {{<jats:p>There is an increasing interest in sensing applications for a variety of analytes in aqueous environments, as conventional methods do not work reliably under humid conditions or they require complex equipment with experienced operators. Hydrogel sensors are easy to fabricate, are incredibly sensitive, and have broad dynamic ranges. Experiments on their robustness, reliability, and reusability have indicated the possible long-term applications of these systems in a variety of fields, including disease diagnosis, detection of pharmaceuticals, and in environmental testing. It is possible to produce hydrogels, which, upon sensing a specific analyte, can adsorb it onto their 3D-structure and can therefore be used to remove them from a given environment. High specificity can be obtained by using molecularly imprinted polymers. Typical detection principles involve optical methods including fluorescence and chemiluminescence, and volume changes in colloidal photonic crystals, as well as electrochemical methods. Here, we explore the current research utilizing hydrogel-based sensors in three main areas: (1) biomedical applications, (2) for detecting and quantifying pharmaceuticals of interest, and (3) detecting and quantifying environmental contaminants in aqueous environments.</jats:p>}},
  author       = {{Völlmecke, Katharina and Afroz, Rowshon and Bierbach, Sascha and Brenker, Lee Josephine and Frücht, Sebastian and Glass, Alexandra and Giebelhaus, Ryland and Hoppe, Axel and Kanemaru, Karen and Lazarek, Michal and Rabbe, Lukas and Song, Longfei and Velasco Suarez, Andrea and Wu, Shuang and Serpe, Michael and Kuckling, Dirk}},
  issn         = {{2310-2861}},
  journal      = {{Gels}},
  keywords     = {{Polymers and Plastics, Organic Chemistry, Biomaterials, Bioengineering}},
  number       = {{12}},
  publisher    = {{MDPI AG}},
  title        = {{{Hydrogel-Based Biosensors}}},
  doi          = {{10.3390/gels8120768}},
  volume       = {{8}},
  year         = {{2022}},
}

@article{47560,
  abstract     = {{<jats:p>As a part of the worldwide efforts to substantially reduce CO2 emissions, power-to-fuel technologies offer a promising path to make the transport sector CO2-free, complementing the electrification of vehicles. This study focused on the coupling of Fischer–Tropsch synthesis for the production of synthetic diesel and kerosene with a high-temperature electrolysis unit. For this purpose, a process model was set up consisting of several modules including a high-temperature co-electrolyzer and a steam electrolyzer, both of which were based on solid oxide electrolysis cell technology, Fischer–Tropsch synthesis, a hydrocracker, and a carrier steam distillation. The integration of the fuel synthesis reduced the electrical energy demand of the co-electrolysis process by more than 20%. The results from the process simulations indicated a power-to-fuel efficiency that varied between 46% and 67%, with a decisive share of the energy consumption of the co-electrolysis process within the energy balance. Moreover, the utilization of excess heat can substantially to completely cover the energy demand for CO2 separation. The economic analysis suggests production costs of 1.85 €/lDE for the base case and the potential to cut the costs to 0.94 €/lDE in the best case scenario. These results underline the huge potential of the developed power-to-fuel technology.</jats:p>}},
  author       = {{Peters, Ralf and Wegener, Nils and Samsun, Remzi Can and Schorn, Felix and Riese, Julia and Grünewald, Marcus and Stolten, Detlef}},
  issn         = {{2227-9717}},
  journal      = {{Processes}},
  keywords     = {{Process Chemistry and Technology, Chemical Engineering (miscellaneous), Bioengineering}},
  number       = {{4}},
  publisher    = {{MDPI AG}},
  title        = {{{A Techno-Economic Assessment of Fischer–Tropsch Fuels Based on Syngas from Co-Electrolysis}}},
  doi          = {{10.3390/pr10040699}},
  volume       = {{10}},
  year         = {{2022}},
}

@article{47553,
  abstract     = {{<jats:title>Abstract</jats:title><jats:p>Minimizing the emissions produced during the processing of biofuel, one aim is to reduce or completely replace the amount of the required fossil fuels used for internal process energy. For the transition of process energy from fossil to renewable energy sources, such as solar and wind, the energy demand of biomass processing must be adjustable to the fluctuating electricity supply. The flexible adjustment of a system's power demand to follow the current power generation is commonly referred to as demand side management (DSM). This contribution shows the results of a study on the implementation of DSM in biofuel biorefineries. By identifying reference concepts that could represent biofuel production plants, the specific mass and energy consumption for the individual process steps in these reference concepts was analyzed through a literature study. The annual throughput and energy consumption of process steps in biofuel production could then be calculated, enabling the identification of the most energy‐consuming process steps. Subsequently, possible flexible operating load ranges of the respective process steps in biofuel production were identified. These findings allowed an assessment of the potential for different process units of biorefinery systems concerning the quantitative adaptability of the electricity load – the theoretical DSM potential. An approximate theoretical DSM potential of 146 MW has been identified for biofuel production in Germany. This cumulated theoretical DSM potential in biofuel production was compared to that of other industrial processes, demonstrating the magnitude and importance of the implementation of DSM in biofuel production. © 2022 The Authors. Biofuels, Bioproducts and Biorefining published by Society of Industrial Chemistry and John Wiley &amp; Sons Ltd.</jats:p>}},
  author       = {{Röder, Lilli Sophia and Gröngröft, Arne and Grünewald, Marcus and Riese, Julia}},
  issn         = {{1932-104X}},
  journal      = {{Biofuels, Bioproducts and Biorefining}},
  keywords     = {{Renewable Energy, Sustainability and the Environment, Bioengineering}},
  number       = {{1}},
  pages        = {{56--70}},
  publisher    = {{Wiley}},
  title        = {{{Assessing the demand side management potential in biofuel production; A theoretical study for biodiesel, bioethanol, and biomethane in Germany}}},
  doi          = {{10.1002/bbb.2452}},
  volume       = {{17}},
  year         = {{2022}},
}

@article{41649,
  author       = {{Büngeler, Anne and Kollmann, Fabian and Huber, Klaus and Strube, Oliver I.}},
  issn         = {{1525-7797}},
  journal      = {{Biomacromolecules}},
  keywords     = {{Materials Chemistry, Polymers and Plastics, Biomaterials, Bioengineering}},
  number       = {{3}},
  pages        = {{1020--1029}},
  publisher    = {{American Chemical Society (ACS)}},
  title        = {{{Targeted Synthesis of the Type-A Particle Substructure from Enzymatically Produced Eumelanin}}},
  doi          = {{10.1021/acs.biomac.1c01390}},
  volume       = {{23}},
  year         = {{2022}},
}

@article{37713,
  author       = {{Murzakhanov, Fadis F. and Mamin, Georgy Vladimirovich and Orlinskii, Sergei Borisovich and Gerstmann, Uwe and Schmidt, Wolf Gero and Biktagirov, Timur and Aharonovich, Igor and Gottscholl, Andreas and Sperlich, Andreas and Dyakonov, Vladimir and Soltamov, Victor A.}},
  issn         = {{1530-6984}},
  journal      = {{Nano Letters}},
  keywords     = {{Mechanical Engineering, Condensed Matter Physics, General Materials Science, General Chemistry, Bioengineering}},
  number       = {{7}},
  pages        = {{2718--2724}},
  publisher    = {{American Chemical Society (ACS)}},
  title        = {{{Electron–Nuclear Coherent Coupling and Nuclear Spin Readout through Optically Polarized V<sub>B</sub><sup>–</sup> Spin States in hBN}}},
  doi          = {{10.1021/acs.nanolett.1c04610}},
  volume       = {{22}},
  year         = {{2022}},
}

@article{41818,
  author       = {{Hense, Dominik and Büngeler, Anne and Kollmann, Fabian and Hanke, Marcel and Orive, Alejandro and Keller, Adrian and Grundmeier, Guido and Huber, Klaus and Strube, Oliver I.}},
  issn         = {{1525-7797}},
  journal      = {{Biomacromolecules}},
  keywords     = {{Materials Chemistry, Polymers and Plastics, Biomaterials, Bioengineering}},
  number       = {{10}},
  pages        = {{4084--4094}},
  publisher    = {{American Chemical Society (ACS)}},
  title        = {{{Self-Assembled Fibrinogen Hydro- and Aerogels with Fibrin-like 3D Structures}}},
  doi          = {{10.1021/acs.biomac.1c00489}},
  volume       = {{22}},
  year         = {{2021}},
}

@article{46017,
  author       = {{Zhang, Dawei and Luo, Zheng-Dong and Yao, Yin and Schoenherr, Peggy and Sha, Chuhan and Pan, Ying and Sharma, Pankaj and Alexe, Marin and Seidel, Jan}},
  issn         = {{1530-6984}},
  journal      = {{Nano Letters}},
  keywords     = {{Mechanical Engineering, Condensed Matter Physics, General Materials Science, General Chemistry, Bioengineering}},
  number       = {{2}},
  pages        = {{995--1002}},
  publisher    = {{American Chemical Society (ACS)}},
  title        = {{{Anisotropic Ion Migration and Electronic Conduction in van der Waals Ferroelectric CuInP2S6}}},
  doi          = {{10.1021/acs.nanolett.0c04023}},
  volume       = {{21}},
  year         = {{2021}},
}

@article{29747,
  author       = {{Jurgen von Bardeleben, Hans and Cantin, Jean-Louis and Gerstmann, Uwe and Schmidt, Wolf Gero and Biktagirov, Timur}},
  issn         = {{1530-6984}},
  journal      = {{Nano Letters}},
  keywords     = {{Mechanical Engineering, Condensed Matter Physics, General Materials Science, General Chemistry, Bioengineering}},
  number       = {{19}},
  pages        = {{8119--8125}},
  publisher    = {{American Chemical Society (ACS)}},
  title        = {{{Spin Polarization, Electron–Phonon Coupling, and Zero-Phonon Line of the NV Center in 3C-SiC}}},
  doi          = {{10.1021/acs.nanolett.1c02564}},
  volume       = {{21}},
  year         = {{2021}},
}

@article{47572,
  abstract     = {{<jats:title>Abstract</jats:title><jats:p>Due to high energy‐intensive processes and a dependence on carbon‐based materials, the process industry plays a major role in climate change. Therefore, the substitution of fossil resources by bio‐based resources is indispensable. This leads to challenges arising from accompanying changes of the type, amount and location of resources. At the same time, transformable production systems are currently in the focus of research addressing the required flexibility. These systems which consist of modular production and logistics units offer the possibility to adapt flexibly in volatile conditions within dynamic supply chains. Hence, this work compiles elements for environmental sustainability, which minimize the carbon footprint in the process industry: transformable production systems, the utilization of bio‐based resources, carbon dioxide and renewable energy as well as the application of these elements in decentral production networks. Finally, possible use cases are determined based on the combination of these elements through a multi‐criteria analysis.</jats:p>}},
  author       = {{Pannok, Maik and Finkbeiner, Marco and Fasel, Henrik and Riese, Julia and Lier, Stefan}},
  issn         = {{2196-9744}},
  journal      = {{ChemBioEng Reviews}},
  keywords     = {{Industrial and Manufacturing Engineering, Filtration and Separation, Process Chemistry and Technology, Biochemistry, Chemical Engineering (miscellaneous), Bioengineering}},
  number       = {{6}},
  pages        = {{216--228}},
  publisher    = {{Wiley}},
  title        = {{{Transformable Decentral Production for Local Economies with Minimized Carbon Footprint}}},
  doi          = {{10.1002/cben.202000008}},
  volume       = {{7}},
  year         = {{2020}},
}

@article{47582,
  abstract     = {{<jats:title>Abstract</jats:title><jats:p>Modeling of heat and mass transfer in fixed‐bed reactors for heterogeneously catalyzed gas phase reactions is possible using different methods. Homogeneous and heterogeneous continuum models as well as particle resolved modeling of fixed‐bed reactors show high potential for application. Considering those approaches, advantages and disadvantages as well as underlying assumptions and boundary conditions are discussed. Additionally, methods for experimental validation are presented and discussed focusing on the two‐dimensional homogeneous models.</jats:p>}},
  author       = {{Stegehake, Carolin and Riese, Julia and Grünewald, Marcus}},
  issn         = {{2196-9744}},
  journal      = {{ChemBioEng Reviews}},
  keywords     = {{Industrial and Manufacturing Engineering, Filtration and Separation, Process Chemistry and Technology, Biochemistry, Chemical Engineering (miscellaneous), Bioengineering}},
  number       = {{2}},
  pages        = {{28--44}},
  publisher    = {{Wiley}},
  title        = {{{Modeling and Validating Fixed‐Bed Reactors: A State‐of‐the‐Art Review}}},
  doi          = {{10.1002/cben.201900002}},
  volume       = {{6}},
  year         = {{2019}},
}

@article{40604,
  author       = {{Taetz, Bertram and Teufl, Wolfgang and Weidmann, Alexander and Pietschmann, Juliane and Jöllenbeck, Thomas and Bleser, Gabriele}},
  issn         = {{1025-5842}},
  journal      = {{Computer Methods in Biomechanics and Biomedical Engineering}},
  keywords     = {{Computer Science Applications, Human-Computer Interaction, Biomedical Engineering, General Medicine, Bioengineering}},
  number       = {{1}},
  pages        = {{12--22}},
  publisher    = {{Informa UK Limited}},
  title        = {{{Depth camera based statistical shape fitting approach for the creation of an individualized lower body biomechanical model: validity and reliability}}},
  doi          = {{10.1080/10255842.2019.1688310}},
  volume       = {{23}},
  year         = {{2019}},
}

@article{41524,
  author       = {{Engelkemeier, Katja and Lindner, Jörg K N and Bürger, Julius and Vaupel, Kathrin and Hartmann, Marc and Tiemann, Michael and Hoyer, Kay-Peter and Schaper, Mirko}},
  issn         = {{0957-4484}},
  journal      = {{Nanotechnology}},
  keywords     = {{Electrical and Electronic Engineering, Mechanical Engineering, Mechanics of Materials, General Materials Science, General Chemistry, Bioengineering}},
  number       = {{9}},
  publisher    = {{IOP Publishing}},
  title        = {{{Nano-architectural complexity of zinc oxide nanowall hollow microspheres and their structural properties}}},
  doi          = {{10.1088/1361-6528/ab55bc}},
  volume       = {{31}},
  year         = {{2019}},
}

@article{35330,
  abstract     = {{<jats:p>Gelled lyotropic liquid crystals can be formed by adding a gelator to a mixture of surfactant and solvent. If the gel network and the liquid-crystalline phase coexist without influencing each other, the self-assembly is called orthogonal. In this study, the influence of the organogelator 12-hydroxyoctadecanoic acid (12-HOA) on the lamellar and hexagonal liquid crystalline phases of the binary system H2O–C12E7 (heptaethylene glycol monododecyl ether) is investigated. More precisely, we added 12-HOA at mass fractions from 0.015 to 0.05 and studied the resulting phase diagram of the system H2O–C12E7 by visual observation of birefringence and by 2H NMR spectroscopy. In addition, the dynamic shear moduli of the samples were measured in order to examine their gel character. The results show that 12-HOA is partly acting as co-surfactant, manifested by the destabilization of the hexagonal phase and the stabilization of the lamellar phase. The higher the total surfactant concentration, the more 12-HOA is incorporated in the surfactant layer. Accordingly, its gelation capacity is substantially reduced in the surfactant solution compared to the system 12-HOA–n-decane, and large amounts of gelator are required for gels to form, especially in the lamellar phase.</jats:p>}},
  author       = {{Steck, Katja and Schmidt, Claudia and Stubenrauch, Cosima}},
  issn         = {{2310-2861}},
  journal      = {{Gels}},
  keywords     = {{Polymers and Plastics, Organic Chemistry, Biomaterials, Bioengineering}},
  number       = {{3}},
  publisher    = {{MDPI AG}},
  title        = {{{The Twofold Role of 12-Hydroxyoctadecanoic Acid (12-HOA) in a Ternary Water—Surfactant—12-HOA System: Gelator and Co-Surfactant}}},
  doi          = {{10.3390/gels4030078}},
  volume       = {{4}},
  year         = {{2018}},
}

@article{46003,
  abstract     = {{<p>Silver nanowire (Ag NW) based composites have shown a great potential not just in transparent electrodes but in diverse functional applications.</p>}},
  author       = {{Du, Haojin and Pan, Ying and Zhang, Xiao and Cao, Fuyang and Wan, Tao and Du, Haiwei and Joshi, Rakesh and Chu, Dewei}},
  issn         = {{2516-0230}},
  journal      = {{Nanoscale Advances}},
  keywords     = {{General Engineering, General Materials Science, General Chemistry, Atomic and Molecular Physics, and Optics, Bioengineering}},
  number       = {{1}},
  pages        = {{140--146}},
  publisher    = {{Royal Society of Chemistry (RSC)}},
  title        = {{{Silver nanowire/nickel hydroxide nanosheet composite for a transparent electrode and all-solid-state supercapacitor}}},
  doi          = {{10.1039/c8na00110c}},
  volume       = {{1}},
  year         = {{2018}},
}