@inbook{21542,
  abstract     = {{Using near-field (NF) scan data to predict the far-field (FF) behaviour of radiating electronic systems represents a novel method to accompany the whole RF design process. This approach involves so-called Huygens' box as an efficient radiation model inside an electromagnetic (EM) simulation tool and then transforms the scanned NF measured data into the FF. For this, the basic idea of the Huygens'box principle and the NF-to-FF transformation are briefly presented. The NF is measured on the Huygens' box around a device under test using anNF scanner, recording the magnitude and phase of the site-related magnetic and electric components. A comparison between a fullwave simulation and the measurement results shows a good similarity in both the NF and the simulated and transformed FF.Thus, this method is applicable to predict the FF behaviour of any electronic system by measuring the NF. With this knowledge, the RF design can be improved due to allowing a significant reduction of EM compatibility failure at the end of the development flow. In addition, the very efficient FF radiation model can be used for detailed investigations in various environments and the impact of such an equivalent radiation source on other electronic systems can be assessed.}},
  author       = {{Schröder, Dominik and Lange, Sven and Hangmann, Christian and Hedayat, Christian}},
  booktitle    = {{Tensorial Analysis of Networks (TAN) Modelling for PCB Signal Integrity and EMC Analysis}},
  isbn         = {{9781839530494}},
  keywords     = {{Huygens' box, NF-to-FF transformation, efficient FF radiation model, FF behaviour, EMI assessment, PCB, near-field measurements, efficient radiation model, far-field behaviour, RF design process, far-field prediction, Huygens'box principle, fullwave simulation, electronic system radiation, equivalent radiation source, electromagnetic simulation tool, near-field scan data, EM compatibility failure reduction}},
  pages        = {{315--346 (32)}},
  publisher    = {{ The Institution of Engineering and Technology (IET)}},
  title        = {{{Far-field prediction combining simulations with near-field measurements for EMI assessment of PCBs}}},
  doi          = {{10.1049/pbcs072e_ch14}},
  year         = {{2020}},
}

@article{20678,
  author       = {{Bielak, Christian Roman and Böhnke, Max and Beck, Robert and Bobbert, Mathias and Meschut, Gerson}},
  journal      = {{Journal of Advanced Joining Processes. }},
  keywords     = {{Clinching, process simulation, FEM, pre-straining, sensitivity analysis}},
  publisher    = {{Elsevier}},
  title        = {{{Numerical analysis of the robustness of clinching process considering the pre-forming of the parts }}},
  doi          = {{https://doi.org/10.1016/j.jajp.2020.100038}},
  year         = {{2020}},
}

@inproceedings{19390,
  abstract     = {{Due to the strong reduction of PV prices, storage plays a dominating role in overall system costs. A 
steeper elevation angle would result in a more balanced seasonal PV yield, at the cost of PV yield reductions during 
summer, but allowing reduced storage capacities. Additionally, the effect of a single-axis tracking system has been 
investigated, generating more electricity during the morning and evening hours, thus reducing daily storage 
requirements. The necessary PV size and storage capacities required for the German energy supply (1,500 TWh after 
electrification of all sectors) via 100% renewable energies and a 50% solar share have been calculated via the 
HOMER Pro software, considering the bridging of periods of "dark lulls“ in winter, using costs of 2030 (Table 1). 
Results: The increase of module elevation angles above the typical 30° leads to a reduction of investment and supply 
costs. The optimum is reached at a cost reduction of -1.5% for an elevation angle at the latitude of the installation 
site. An explanation is that high elevation angles are favorable for clear winter days, but not at all for the critical days 
with diffuse irradiance only, so the battery capacity must be increased. For the same reason, tracking systems do not 
offer any cost advantage (at least for the ones without an option for horizontal positioning during diffuse days).}},
  author       = {{Krauter, Stefan and Rustemovic, D. and Khatibi, Arash}},
  booktitle    = {{Proceedings of the 37th European Photovoltaic Solar Energy Conference, 07 - 11 September 2020}},
  isbn         = {{3-936338-73-6}},
  keywords     = {{Energy Storage, PV system integration, Large Grid-connected PV systems, Simulation, Energy Supply Options}},
  location     = {{online}},
  pages        = {{1818 -- 1819}},
  title        = {{{Reduction of required storage capacities for a 100% renewable energy supply in Germany, if new PV systems are installed with east-west tracking systems at increased elevation angles}}},
  doi          = {{10.4229/EUPVSEC20202020-6BV.5.10}},
  year         = {{2020}},
}

@article{33263,
  abstract     = {{Dynamical systems often admit geometric properties that must be taken into account when studying their behavior. We show that many such properties can be encoded by means of quiver representations. These properties include classical symmetry, hidden symmetry, and feedforward structure, as well as subnetwork and quotient relations in network dynamical systems. A quiver equivariant dynamical system consists of a collection of dynamical systems with maps between them that send solutions to solutions. We prove that such quiver structures are preserved under Lyapunov--Schmidt reduction, center manifold reduction, and normal form reduction.}},
  author       = {{Nijholt, Eddie and Rink, Bob W. and Schwenker, Sören}},
  issn         = {{1536-0040}},
  journal      = {{SIAM Journal on Applied Dynamical Systems}},
  keywords     = {{Modeling and Simulation, Analysis}},
  number       = {{4}},
  pages        = {{2428--2468}},
  publisher    = {{Society for Industrial & Applied Mathematics (SIAM)}},
  title        = {{{Quiver Representations and Dimension Reduction in Dynamical Systems}}},
  doi          = {{10.1137/20m1345670}},
  volume       = {{19}},
  year         = {{2020}},
}

@article{34670,
  author       = {{Black, Tobias}},
  issn         = {{0218-2025}},
  journal      = {{Mathematical Models and Methods in Applied Sciences}},
  keywords     = {{Applied Mathematics, Modeling and Simulation}},
  number       = {{06}},
  pages        = {{1075--1117}},
  publisher    = {{World Scientific Pub Co Pte Lt}},
  title        = {{{Global generalized solutions to a forager–exploiter model with superlinear degradation and their eventual regularity properties}}},
  doi          = {{10.1142/s0218202520400072}},
  volume       = {{30}},
  year         = {{2020}},
}

@inproceedings{15332,
  abstract     = {{Artificial intelligence (AI) has the potential for far-reaching – in our opinion – irreversible changes.
They range from effects on the individual and society to new societal and social issues. The question arises
as to how students can learn the basic functioning of AI systems, what areas of life and society are affected
by these and – most important – how their own lives are affected by these changes. Therefore, we are developing and evaluating school materials for the German ”Science Year AI”. It can be used for students of all
school types from the seventh grade upwards and will be distributed to about 2000 schools in autumn with
the support of the Federal Ministry of Education and Research. The material deals with the following aspects
of AI: Discussing everyday experiences with AI, how does machine learning work, historical development
of AI concepts, difference between man and machine, future distribution of roles between man and machine,
in which AI world do we want to live and how much AI would we like to have in our lives. Through an
accompanying evaluation, high quality of the technical content and didactic preparation is achieved in order
to guarantee the long-term applicability in the teaching context in the different age groups and school types.
In this paper, we describe the current state of the material development, the challenges arising, and the results
of tests with different classes to date. We also present first ideas for evaluating the results.}},
  author       = {{Schlichtig, Michael and Opel, Simone Anna and Budde, Lea and Schulte, Carsten}},
  booktitle    = {{ISSEP 2019 - 12th International conference on informatics in schools: Situation, evaluation and perspectives, Local Proceedings}},
  editor       = {{Jasutė, Eglė and Pozdniakov, Sergei}},
  isbn         = {{978-9925-553-27-3}},
  keywords     = {{Artificial Intelligence, Machine Learning, Teaching Material, Societal Aspects, Ethics. Social Aspects, Science Year, Simulation Game}},
  location     = {{Lanarca}},
  pages        = {{65 -- 73}},
  title        = {{{Understanding Artificial Intelligence – A Project for the Development of Comprehensive Teaching Material}}},
  volume       = {{12}},
  year         = {{2019}},
}

@phdthesis{41958,
  abstract     = {{Das Nasspressverfahren ist ein Serienherstellungsprozess für Bauteile aus duroplastischen Faserverbundkunststoffen (FVK) mit einer geringen Geometriekomplexität. Im Rahmen dieser Arbeit wurde ein modifiziertes Nasspressverfahren untersucht, welches die Herstellung von hybriden Blech-FVK-Strukturen ermöglicht. Die stoffschlüssige Verbindung zwischen dem metallischen Trägerbauteil und einem lokalen FVK-Verstärkungselement wird durch Co-Bonding im Nasspresswerkzeug aufgebaut. Epoxidbasierte Matrixharze und Klebstoffe wurden mit Methoden der Klebtechnik sowie thermischen und rheometrischen Prüfungen charakterisiert, um ein materialspezifisches Fertigungsprozessfenster einzugrenzen. Experimentelle Untersuchungen zum Nasspressen von GFK-Laminaten und Stahl-GFK-Hybridstrukturen fokussierten die Mikrostruktur und das strukturelle Verhalten von stoffschlüssigen Hybridverbindungen. Unter anderem wurden Einflüsse von zeit-, temperatur- und druckabhängigen Fertigungsparametern sowie der Einsatz von Strukturklebstofffilmen und internen Trennmitteln analysiert. Anhand von Fallturmtests an hybriden Demonstratorkomponenten konnte das modifizierte Nasspressverfahren für die Herstellung crashrelevanter Karosseriebauteile qualifiziert werden.}},
  author       = {{Opdemom, Hermann}},
  isbn         = {{978-3-8440-6428-5}},
  keywords     = {{Leichtbau, Faserverbundkunststoffe, Nasspressverfahren, Hybridbauteile, Rheologie, Klebtechnik, Co-Bonding}},
  pages        = {{178}},
  publisher    = {{Shaker Verlag}},
  title        = {{{Experimentelle Untersuchung einse modifzierten Nasspressverfahrens für die Herstellung von hybriden Metall-Faserverbundkunststoff-Bauteilen}}},
  volume       = {{2019,35}},
  year         = {{2019}},
}

@phdthesis{10000,
  abstract     = {{Ultraschall wird zur Effizienzsteigerung in verfahrenstechnischen Prozessen eingesetzt. Die Betriebsparamter der Ultraschallsysteme werden empirisch ermittelt, da derzeit keine systematische Analyse der Wechselwirkung zwischen Ultraschallwandler und Schallfeld sowie kein Verfahren zur Messung der Kavitationsaktivität ohne zusätzlichen Sensor existieren. Auf Basis einer experimentellen Analyse des betrachteten sonochemischen Reaktors wird ein Finite-Elemente-Modell aufgebaut, das die Wechselwirkung zwischen Schallfeld und Ultraschallwandler berücksichtigt. Die modellbasierte Analyse zeigt, dass wegen der akustischen Eigenschaften des Autoklavs nur direkt an der Sonotrode Kavitation entsteht. Die Wechselwirkung zwischen Ultraschallwandler und Schallfeld ermöglicht Aussagen über das Schallfeld und die Kavitationsaktivität auf Basis der Rückwirkung auf den Ultraschallwandler. Die lineare Schalldruckverteilung ermöglicht eine Prognose über die Verteilung von Kavitationszonen. Das beschriebene Modell liefert wertvolle Erkenntnisse für die Auslegung, Analyse und Skalierung sonochemischer Reaktoren. Auf Grund der rauen Prozessrandbedingungen ist die Applikation von Sensoren zur Überwachung der Kavitationsaktivität in vielen sonochemischen Prozessen nicht möglich. Zur prozessbegleitenden Messung der Kavitationsaktivität wird ein Verfahren entwickelt, das die Bewertung der Kavitationsaktivität durch Auswertung der Rückwirkung auf den Ultraschallwandler erlaubt. Das Messverfahren ermöglicht eine vorhersagbare und reproduzierbare Durchführung kavitationsbasierter Prozesse und stellt eine wichtige Erweiterung für bestehende und neue Ultraschallsysteme dar.}},
  author       = {{Bornmann, Peter}},
  keywords     = {{Sonochemie, Akustische Kavitation, Kavitationsmessung, Kavitationsdetektion, FEM-Simulation Ultraschallwandler, Prozessüberwachung, FEM-Simulation Schallfeld, Self-Sensing, Piezoelektrische Ultraschallwandler, Ultraschallreinigung}},
  publisher    = {{Shaker}},
  title        = {{{Modellierung und experimentelle Charakterisierung der Wechselwirkung zwischen Ultraschallwandler und Flüssigkeit in kavitationsbasierten Prozessen}}},
  year         = {{2019}},
}

@article{64018,
  abstract     = {{CO oxidation is an extensively studied reaction in heterogeneous catalysis due to its seeming simplicity and its great importance for emission control. However, the role of particle size and more specifically structure sensitivity in this reaction is still controversial. In the present study, colloidal “surfactant-free” Pt nanoparticles (NPs) in a size regime of 1–4 nm with narrow size distribution and control over particle size were synthesized and subsequently supported on Al2O3 to prepare model catalysts. CO oxidation was performed using Pt NPs catalysts with particles sizes of 1, 2, 3, and 4 nm at different reaction temperatures. It is shown that the reaction exhibits a particle size effect that depends strongly on the reaction conditions. At 170 °C, the reaction seems to proceed within the same kinetic regime for all particle sizes, but the surface normalized activity depends strongly on the particle size, with maximum activity for nanoparticles 2 nm in diameter. A temperature increase to 200 °C leads to a change of the kinetic regime that depends on the particle size. For Pt NPs 1 nm in diameter a reaction order of 1 for O2 was observed, indicating that O2 adsorbs molecularly and dissociates in a following step, which represents the generally accepted mechanism on Pt surfaces. The reaction order of −1 for CO demonstrates that the surface is saturated with CO under reaction conditions. With increasing particle size, the reaction orders of O2 and CO change. For particles 2 nm in size, an increase in temperature also results in reaction orders of 1 for O2 and −1 for CO; NPs of 3 and 4 nm, even at higher temperatures, show no clear kinetic behavior that can be explained by a single reaction mechanism. Instead, the Boudouard reaction between two adjacent adsorbed CO molecules was identified as an important additional reaction pathway that occurs preferentially on large particles and causes more complex kinetics.}},
  author       = {{Neumann, Sarah and Gutmann, Torsten and Buntkowsky, Gerd and Paul, Stephen and Thiele, Greg and Sievers, Heiko and Bäumer, Marcus and Kunz, Sebastian}},
  journal      = {{Journal of Catalysis}},
  keywords     = {{Solid state NMR, “Surfactant-free” platinum nanoparticles, CO oxidation, Particle size effect, Structure sensitivity}},
  pages        = {{662–672}},
  title        = {{{Insights into the reaction mechanism and particle size effects of CO oxidation over supported Pt nanoparticle catalysts}}},
  doi          = {{10.1016/j.jcat.2019.07.049}},
  volume       = {{377}},
  year         = {{2019}},
}

@inproceedings{10598,
  abstract     = {{Approximate computing has become a very popular design
strategy that exploits error resilient computations to achieve higher
performance and energy efficiency. Automated synthesis of approximate
circuits is performed via functional approximation, in which various
parts of the target circuit are extensively examined with a library
of approximate components/transformations to trade off the functional
accuracy and computational budget (i.e., power). However, as the number
of possible approximate transformations increases, traditional search
techniques suffer from a combinatorial explosion due to the large
branching factor. In this work, we present a comprehensive framework
for automated synthesis of approximate circuits from either structural
or behavioral descriptions. We adapt the Monte Carlo Tree Search
(MCTS), as a stochastic search technique, to deal with the large design
space exploration, which enables a broader range of potential possible
approximations through lightweight random simulations. The proposed
framework is able to recognize the design Pareto set even with low
computational budgets. Experimental results highlight the capabilities of
the proposed synthesis framework by resulting in up to 61.69% energy
saving while maintaining the predefined quality constraints.}},
  author       = {{Awais, Muhammad and Ghasemzadeh Mohammadi, Hassan and Platzner, Marco}},
  booktitle    = {{26th IFIP/IEEE International Conference on Very Large Scale Integration (VLSI-SoC)}},
  keywords     = {{Approximate computing, High-level synthesis, Accuracy, Monte-Carlo tree search, Circuit simulation}},
  pages        = {{219--224}},
  title        = {{{An MCTS-based Framework for Synthesis of Approximate Circuits}}},
  doi          = {{10.1109/VLSI-SoC.2018.8645026}},
  year         = {{2018}},
}

@article{30935,
  author       = {{Anderski, Juliane and Mahlert, Laura and Sun, Jingjiang and Birnbaum, Wolfgang and Mulac, Dennis and Schreiber, Sebastian and Herrmann, Fabian and Kuckling, Dirk and Langer, Klaus}},
  issn         = {{0378-5173}},
  journal      = {{International Journal of Pharmaceutics}},
  keywords     = {{NanoparticlesLight-responsive polymersPhotodynamic therapyPoly(lactic-co-glycolic acid)Intestinal cancer}},
  pages        = {{182--191}},
  publisher    = {{Elsevier BV}},
  title        = {{{Light-responsive nanoparticles based on new polycarbonate polymers as innovative drug delivery systems for photosensitizers in PDT}}},
  doi          = {{10.1016/j.ijpharm.2018.12.040}},
  volume       = {{557}},
  year         = {{2018}},
}

@techreport{20868,
  abstract     = {{This study proposes a simple theoretical framework that allows for assessing financial distress up to five years in advance. We jointly model financial distress by using two of its key driving factors: declining cash-generating ability and insufficient liquidity reserves. The model is based on stochastic processes and incorporates firm-level and industry-sector developments. A large-scale empirical implementation for US-listed firms over the period of 1980-2010 shows important improvements in the discriminatory accuracy and demonstrates incremental information content beyond state-of-the-art accounting and market-based prediction models. Consequently, this study might provide important ex ante warning signals for investors, regulators and practitioners.}},
  author       = {{Sievers, Sönke and Klobucnik, Jan and Miersch, David}},
  keywords     = {{Financial distress prediction, probability of default, accounting information, stochastic processes, simulation}},
  pages        = {{84}},
  title        = {{{Predicting Early Warning Signals of Financial Distress: Theory and Empirical Evidence}}},
  doi          = {{10.2139/ssrn.2237757}},
  year         = {{2017}},
}

@article{9972,
  abstract     = {{The transportation of dry fine powders is an emerging technologic task, as in biotechnology, pharmaceu-tical and coatings industry the particle sizes of processed powders get smaller and smaller. Fine powdersare primarily defined by the fact that adhesive and cohesive forces outweigh the weight forces, leadingto mostly unwanted agglomeration (clumping) and adhesion to surfaces. Thereby it gets more difficult touse conventional conveyor systems (e.g. pneumatic or vibratory conveyors) for transport. A rather newmethod for transporting these fine powders is based on ultrasonic vibrations, which are used to reducefriction between powder and substrate. Within this contribution an experimental set-up consisting of apipe, a solenoid actuator for axial vibration and an annular piezoelectric actuator for the high frequencyradial vibration of the pipe is described. Since amplitudes of the radial pipe vibration should be as large aspossible to get high effects of friction reduction, the pipe is excited to vibrate in resonance. To determinethe optimum excitation frequency and actuator position the vibration modes and resonance frequenciesof the pipe are calculated and measured. Results are in good accordance.}},
  author       = {{Dunst, Paul and Hemsel, Tobias and Sextro, Walter}},
  journal      = {{elsevier}},
  keywords     = {{Powder transport Piezoelectrics Ultrasonics Pipe vibration Finite element simulation Fine powder}},
  pages        = {{733--736}},
  title        = {{{Analysis of pipe vibration in an ultrasonic powder transportationsystem}}},
  volume       = {{Sensors and Actuators A 263}},
  year         = {{2017}},
}

@article{5199,
  abstract     = {{This study proposes a simple theoretical framework that allows for assessing financial distress up to five years in advance. We jointly model financial distress by using two of its key driving factors: declining cash-generating ability and insufficient liquidity reserves. The model is based on stochastic processes and incorporates firm-level and industry-sector developments. A large-scale empirical implementation for US-listed firms over the period of 1980-2010 shows important improvements in the discriminatory accuracy and demonstrates incremental information content beyond state-of-the-art accounting and market-based prediction models. Consequently, this study might provide important ex ante warning signals for investors, regulators and practitioners. }},
  author       = {{Klobucnik, Jan and Miersch, David and Sievers, Sönke}},
  journal      = {{SSRN Electronic Journal}},
  keywords     = {{Financial distress prediction, probability of default, accounting information, stochastic processes, simulation}},
  title        = {{{Predicting Early Warning Signals of Financial Distress: Theory and Empirical Evidence}}},
  year         = {{2017}},
}

@inproceedings{9955,
  abstract     = {{Wire bonding has been an established packaging technology for decades. When introducing copper as wire material for high power applications, adaptations to the bonding process and to machines became necessary. Here, challenges occur due to the stiffer wire material and changing oxide layers on the contact partners. To achieve sufficient process stability, a clean bond area is required, which can only be achieved with high shear stresses in the contact partners surfaces. These necessitate high normal forces to plastically deform the wire and substrate. To achieve such high stresses in the contact area, the bonding tool needs to be able to transmit the needed tangential forces to the top side of the wire. The wire itself performs a shear movement and transmits the force into the contact area to clean the contaminant and oxide layers and to level the desired bond surfaces. The main function of the tool is to transmit these forces. If the bond tool can only transmit low forces in the direction of excitation, the parameter space for a stable bond process is severely restricted. Here, a modeling approach to estimate how well different tool shapes meet the demand of transmitting high tangential forces is presented. The model depends on wire deformation and thus on the ultrasonic softening effect.}},
  author       = {{Althoff, Simon and Meyer, Tobias and Unger, Andreas and Sextro, Walter and Eacock, Florian}},
  booktitle    = {{IEEE 66th Electronic Components and Technology Conference}},
  keywords     = {{finite element simulation, wire bonding, tool geometry}},
  pages        = {{2103--2110}},
  title        = {{{Shape-Dependent Transmittable Tangential Force of Wire Bond Tools}}},
  doi          = {{10.1109/ECTC.2016.234}},
  year         = {{2016}},
}

@inproceedings{17659,
  author       = {{Polevoy, Gleb and Trajanovski, Stojan and de Weerdt, Mathijs M.}},
  booktitle    = {{Proceedings of the 2014 International Conference on Autonomous Agents and Multi-agent Systems}},
  isbn         = {{978-1-4503-2738-1}},
  keywords     = {{competition, equilibrium, market, models, shared effort games, simulation}},
  pages        = {{861--868}},
  publisher    = {{International Foundation for Autonomous Agents and Multiagent Systems}},
  title        = {{{Nash Equilibria in Shared Effort Games}}},
  year         = {{2014}},
}

@inproceedings{17661,
  author       = {{King, Thomas C. and Liu, Qingzhi and Polevoy, Gleb and de Weerdt, Mathijs and Dignum, Virginia and van Riemsdijk, M. Birna and Warnier, Martijn}},
  booktitle    = {{Proceedings of the 2014 International Conference on Autonomous Agents and Multi-agent Systems}},
  isbn         = {{978-1-4503-2738-1}},
  keywords     = {{crowd-sensing, crowdsourcing, data aggregation, game theory, norms, reciprocation, self interested agents, simulation}},
  pages        = {{1651--1652}},
  publisher    = {{International Foundation for Autonomous Agents and Multiagent Systems}},
  title        = {{{Request Driven Social Sensing}}},
  year         = {{2014}},
}

@inproceedings{17202,
  author       = {{Vollmer, Anna-Lisa and Grizou, Jonathan and Lopes, Manuel and Rohlfing, Katharina and Oudeyer, Pierre-Yves}},
  booktitle    = {{2014 Joint IEEE International Conference on Development and Learning and on Epigenetic Robotics}},
  isbn         = {{978-1-4799-7540-2}},
  keywords     = {{interaction, communication, co-construction, interaction protocols}},
  pages        = {{208 -- 215}},
  publisher    = {{IEEE}},
  title        = {{{Studying the Co-Construction of Interaction Protocols in Collaborative Tasks with Humans}}},
  year         = {{2014}},
}

@article{34442,
  abstract     = {{Radial shaft seals are used in a variety of applications, where rotating shafts in steady housings have to be sealed. Typical examples are crankshafts, camshafts, differential gear or hydraulic pumps. In the operating state the elastomeric seal ring and the shaft are separated by a lubrication film of just a few micrometers. Due to shear strain and fluid friction the contact area is subject to a higher temperature than the rest of the seal ring. The stiffness of the elastomeric material is intensely influenced by this temperature and thus contact pressure, friction and wear also strongly depend on the contact temperature. In order to simulate the contact behavior of elastomer seal rings it is essential to use a comprehensive approach which takes into consideration the interaction of temperature, friction and wear. Based on this idea a macroscopic simulation model has been developed at the MEGT. It combines a finite element approach for the simulation of contact pressure at different wear states, a semi-analytical approach for the calculation of contact temperature and an empirical approach for the calculation of friction. In this paper the model setup is presented, as well as simulation and experimental results.}},
  author       = {{Frölich, D. and Magyar, Balázs and Sauer, B.}},
  issn         = {{0043-1648}},
  journal      = {{Wear}},
  keywords     = {{Radial shaft seal ring, Contact temperature, Wear, Friction torque, Finite element simulation}},
  number       = {{1}},
  pages        = {{71--80}},
  title        = {{{A comprehensive model of wear, friction and contact temperature in radial shaft seals}}},
  doi          = {{https://doi.org/10.1016/j.wear.2013.12.030}},
  volume       = {{311}},
  year         = {{2014}},
}

@article{31024,
  abstract     = {{Im Zuge der systemweiten Einführung schulischer Inklusion gewinnen Ansätze einer Inklusion unterstützenden Didaktik zunehmend an Bedeutung. Der Beitrag beschreibt zunächst ausgehend vom Inklusionsbegriff die fünf Leitlinien des Bielefelder Ansatzes einer Didaktik für inklusive Lerngruppen: die Akzeptanz aller Schülerinnen und Schüler in ihrer Individualität, der Einsatz förderdiagnostisch fundierter individualisierter Curricula, die Verwirklichung eines adaptiven und binnendifferenzierten Unterrichts, eine besondere Aufmerksamkeit für die Herstellung von Gemeinsamkeit aller Schüler und die didaktische Umsetzung dieser Aspekte im Co-Teaching [...]. Anhand der Ergebnisse einer Interview-Studie mit Experten aus der Praxis wird dieser Ansatz in einem zweiten Schritt auf Praxisrelevanz überprüft und reflektiert.}},
  author       = {{Textor, Annette and Kullmann, Harry and Lütje-Klose, Birgit}},
  journal      = {{Jahrbuch für Allgemeine Didaktik}},
  keywords     = {{Inklusion, Didaktik, Unterricht, Co-Teaching, Individualisierung, Soziale Integration, Einstellungen}},
  pages        = {{69–91}},
  title        = {{{Eine Inklusion unterstützende Didaktik – Rekonstruktionen aus der Perspektive inklusionserfahrener Lehrkräfte}}},
  volume       = {{4}},
  year         = {{2014}},
}