--- _id: '21542' abstract: - lang: eng text: Using near-field (NF) scan data to predict the far-field (FF) behaviour of radiating electronic systems represents a novel method to accompany the whole RF design process. This approach involves so-called Huygens' box as an efficient radiation model inside an electromagnetic (EM) simulation tool and then transforms the scanned NF measured data into the FF. For this, the basic idea of the Huygens'box principle and the NF-to-FF transformation are briefly presented. The NF is measured on the Huygens' box around a device under test using anNF scanner, recording the magnitude and phase of the site-related magnetic and electric components. A comparison between a fullwave simulation and the measurement results shows a good similarity in both the NF and the simulated and transformed FF.Thus, this method is applicable to predict the FF behaviour of any electronic system by measuring the NF. With this knowledge, the RF design can be improved due to allowing a significant reduction of EM compatibility failure at the end of the development flow. In addition, the very efficient FF radiation model can be used for detailed investigations in various environments and the impact of such an equivalent radiation source on other electronic systems can be assessed. author: - first_name: Dominik full_name: Schröder, Dominik last_name: Schröder - first_name: Sven full_name: Lange, Sven id: '38240' last_name: Lange - first_name: Christian full_name: Hangmann, Christian last_name: Hangmann - first_name: Christian full_name: Hedayat, Christian last_name: Hedayat citation: ama: 'Schröder D, Lange S, Hangmann C, Hedayat C. Far-field prediction combining simulations with near-field measurements for EMI assessment of PCBs. In: Tensorial Analysis of Networks (TAN) Modelling for PCB Signal Integrity and EMC Analysis. 1st ed. Croyton, UK: The Institution of Engineering and Technology (IET); 2020:315-346 (32). doi:10.1049/pbcs072e_ch14' apa: 'Schröder, D., Lange, S., Hangmann, C., & Hedayat, C. (2020). Far-field prediction combining simulations with near-field measurements for EMI assessment of PCBs. In Tensorial Analysis of Networks (TAN) Modelling for PCB Signal Integrity and EMC Analysis (1st ed., pp. 315-346 (32)). Croyton, UK: The Institution of Engineering and Technology (IET). https://doi.org/10.1049/pbcs072e_ch14' bibtex: '@inbook{Schröder_Lange_Hangmann_Hedayat_2020, place={Croyton, UK}, edition={1}, title={Far-field prediction combining simulations with near-field measurements for EMI assessment of PCBs}, DOI={10.1049/pbcs072e_ch14}, booktitle={Tensorial Analysis of Networks (TAN) Modelling for PCB Signal Integrity and EMC Analysis}, publisher={ The Institution of Engineering and Technology (IET)}, author={Schröder, Dominik and Lange, Sven and Hangmann, Christian and Hedayat, Christian}, year={2020}, pages={315-346 (32)} }' chicago: 'Schröder, Dominik, Sven Lange, Christian Hangmann, and Christian Hedayat. “Far-Field Prediction Combining Simulations with near-Field Measurements for EMI Assessment of PCBs.” In Tensorial Analysis of Networks (TAN) Modelling for PCB Signal Integrity and EMC Analysis, 1st ed., 315-346 (32). Croyton, UK: The Institution of Engineering and Technology (IET), 2020. https://doi.org/10.1049/pbcs072e_ch14.' ieee: 'D. Schröder, S. Lange, C. Hangmann, and C. Hedayat, “Far-field prediction combining simulations with near-field measurements for EMI assessment of PCBs,” in Tensorial Analysis of Networks (TAN) Modelling for PCB Signal Integrity and EMC Analysis, 1st ed., Croyton, UK: The Institution of Engineering and Technology (IET), 2020, pp. 315-346 (32).' mla: Schröder, Dominik, et al. “Far-Field Prediction Combining Simulations with near-Field Measurements for EMI Assessment of PCBs.” Tensorial Analysis of Networks (TAN) Modelling for PCB Signal Integrity and EMC Analysis, 1st ed., The Institution of Engineering and Technology (IET), 2020, pp. 315-346 (32), doi:10.1049/pbcs072e_ch14. short: 'D. Schröder, S. Lange, C. Hangmann, C. Hedayat, in: Tensorial Analysis of Networks (TAN) Modelling for PCB Signal Integrity and EMC Analysis, 1st ed., The Institution of Engineering and Technology (IET), Croyton, UK, 2020, pp. 315-346 (32).' date_created: 2021-03-18T13:49:49Z date_updated: 2022-01-06T06:55:03Z department: - _id: '485' doi: 10.1049/pbcs072e_ch14 edition: '1' keyword: - Huygens' box - NF-to-FF transformation - efficient FF radiation model - FF behaviour - EMI assessment - PCB - near-field measurements - efficient radiation model - far-field behaviour - RF design process - far-field prediction - Huygens'box principle - fullwave simulation - electronic system radiation - equivalent radiation source - electromagnetic simulation tool - near-field scan data - EM compatibility failure reduction language: - iso: eng main_file_link: - url: https://digital-library.theiet.org/content/books/10.1049/pbcs072e_ch14 page: 315-346 (32) place: Croyton, UK project: - _id: '52' name: Computing Resources Provided by the Paderborn Center for Parallel Computing publication: Tensorial Analysis of Networks (TAN) Modelling for PCB Signal Integrity and EMC Analysis publication_identifier: isbn: - '9781839530494' - '9781839530500' publication_status: published publisher: ' The Institution of Engineering and Technology (IET)' related_material: record: - id: '21542' relation: other status: public status: public title: Far-field prediction combining simulations with near-field measurements for EMI assessment of PCBs type: book_chapter user_id: '38240' year: '2020' ... --- _id: '20678' author: - first_name: Christian Roman full_name: Bielak, Christian Roman id: '34782' last_name: Bielak - first_name: Max full_name: Böhnke, Max id: '45779' last_name: Böhnke - first_name: Robert full_name: Beck, Robert id: '38279' last_name: Beck - first_name: Mathias full_name: Bobbert, Mathias id: '7850' last_name: Bobbert - first_name: Gerson full_name: Meschut, Gerson id: '32056' last_name: Meschut orcid: 0000-0002-2763-1246 citation: ama: Bielak CR, Böhnke M, Beck R, Bobbert M, Meschut G. Numerical analysis of the robustness of clinching process considering the pre-forming of the parts . Journal of Advanced Joining Processes . Published online 2020. doi:https://doi.org/10.1016/j.jajp.2020.100038 apa: Bielak, C. R., Böhnke, M., Beck, R., Bobbert, M., & Meschut, G. (2020). Numerical analysis of the robustness of clinching process considering the pre-forming of the parts . Journal of Advanced Joining Processes. . https://doi.org/10.1016/j.jajp.2020.100038 bibtex: '@article{Bielak_Böhnke_Beck_Bobbert_Meschut_2020, title={Numerical analysis of the robustness of clinching process considering the pre-forming of the parts }, DOI={https://doi.org/10.1016/j.jajp.2020.100038}, journal={Journal of Advanced Joining Processes. }, publisher={Elsevier}, author={Bielak, Christian Roman and Böhnke, Max and Beck, Robert and Bobbert, Mathias and Meschut, Gerson}, year={2020} }' chicago: Bielak, Christian Roman, Max Böhnke, Robert Beck, Mathias Bobbert, and Gerson Meschut. “Numerical Analysis of the Robustness of Clinching Process Considering the Pre-Forming of the Parts .” Journal of Advanced Joining Processes. , 2020. https://doi.org/10.1016/j.jajp.2020.100038. ieee: 'C. R. Bielak, M. Böhnke, R. Beck, M. Bobbert, and G. Meschut, “Numerical analysis of the robustness of clinching process considering the pre-forming of the parts ,” Journal of Advanced Joining Processes. , 2020, doi: https://doi.org/10.1016/j.jajp.2020.100038.' mla: Bielak, Christian Roman, et al. “Numerical Analysis of the Robustness of Clinching Process Considering the Pre-Forming of the Parts .” Journal of Advanced Joining Processes. , Elsevier, 2020, doi:https://doi.org/10.1016/j.jajp.2020.100038. short: C.R. Bielak, M. Böhnke, R. Beck, M. Bobbert, G. Meschut, Journal of Advanced Joining Processes. (2020). date_created: 2020-12-02T16:21:34Z date_updated: 2022-03-24T09:39:11Z department: - _id: '157' doi: https://doi.org/10.1016/j.jajp.2020.100038 keyword: - Clinching - process simulation - FEM - pre-straining - sensitivity analysis language: - iso: eng project: - _id: '130' grant_number: '418701707' name: 'TRR 285: TRR 285' - _id: '131' name: 'TRR 285 - A: TRR 285 - Project Area A' - _id: '135' name: 'TRR 285 – A01: TRR 285 - Subproject A01' publication: 'Journal of Advanced Joining Processes. ' publication_identifier: unknown: - https://doi.org/10.1016/j.jajp.2020.100038 publication_status: published publisher: Elsevier status: public title: 'Numerical analysis of the robustness of clinching process considering the pre-forming of the parts ' type: journal_article user_id: '34782' year: '2020' ... --- _id: '19390' abstract: - lang: eng text: "Due to the strong reduction of PV prices, storage plays a dominating role in overall system costs. A \r\nsteeper elevation angle would result in a more balanced seasonal PV yield, at the cost of PV yield reductions during \r\nsummer, but allowing reduced storage capacities. Additionally, the effect of a single-axis tracking system has been \r\ninvestigated, generating more electricity during the morning and evening hours, thus reducing daily storage \r\nrequirements. The necessary PV size and storage capacities required for the German energy supply (1,500 TWh after \r\nelectrification of all sectors) via 100% renewable energies and a 50% solar share have been calculated via the \r\nHOMER Pro software, considering the bridging of periods of \"dark lulls“ in winter, using costs of 2030 (Table 1). \r\nResults: The increase of module elevation angles above the typical 30° leads to a reduction of investment and supply \r\ncosts. The optimum is reached at a cost reduction of -1.5% for an elevation angle at the latitude of the installation \r\nsite. An explanation is that high elevation angles are favorable for clear winter days, but not at all for the critical days \r\nwith diffuse irradiance only, so the battery capacity must be increased. For the same reason, tracking systems do not \r\noffer any cost advantage (at least for the ones without an option for horizontal positioning during diffuse days)." author: - first_name: Stefan full_name: Krauter, Stefan id: '28836' last_name: Krauter orcid: 0000-0002-3594-260X - first_name: D. full_name: Rustemovic, D. last_name: Rustemovic - first_name: Arash full_name: Khatibi, Arash id: '43538' last_name: Khatibi citation: ama: 'Krauter S, Rustemovic D, Khatibi A. Reduction of required storage capacities for a 100% renewable energy supply in Germany, if new PV systems are installed with east-west tracking systems at increased elevation angles. In: Proceedings of the 37th European Photovoltaic Solar Energy Conference, 07 - 11 September 2020. ; 2020:1818-1819. doi:10.4229/EUPVSEC20202020-6BV.5.10' apa: Krauter, S., Rustemovic, D., & Khatibi, A. (2020). Reduction of required storage capacities for a 100% renewable energy supply in Germany, if new PV systems are installed with east-west tracking systems at increased elevation angles. Proceedings of the 37th European Photovoltaic Solar Energy Conference, 07 - 11 September 2020, 1818–1819. https://doi.org/10.4229/EUPVSEC20202020-6BV.5.10 bibtex: '@inproceedings{Krauter_Rustemovic_Khatibi_2020, title={Reduction of required storage capacities for a 100% renewable energy supply in Germany, if new PV systems are installed with east-west tracking systems at increased elevation angles}, DOI={10.4229/EUPVSEC20202020-6BV.5.10}, booktitle={Proceedings of the 37th European Photovoltaic Solar Energy Conference, 07 - 11 September 2020}, author={Krauter, Stefan and Rustemovic, D. and Khatibi, Arash}, year={2020}, pages={1818–1819} }' chicago: Krauter, Stefan, D. Rustemovic, and Arash Khatibi. “Reduction of Required Storage Capacities for a 100% Renewable Energy Supply in Germany, If New PV Systems Are Installed with East-West Tracking Systems at Increased Elevation Angles.” In Proceedings of the 37th European Photovoltaic Solar Energy Conference, 07 - 11 September 2020, 1818–19, 2020. https://doi.org/10.4229/EUPVSEC20202020-6BV.5.10. ieee: 'S. Krauter, D. Rustemovic, and A. Khatibi, “Reduction of required storage capacities for a 100% renewable energy supply in Germany, if new PV systems are installed with east-west tracking systems at increased elevation angles,” in Proceedings of the 37th European Photovoltaic Solar Energy Conference, 07 - 11 September 2020, online, 2020, pp. 1818–1819, doi: 10.4229/EUPVSEC20202020-6BV.5.10.' mla: Krauter, Stefan, et al. “Reduction of Required Storage Capacities for a 100% Renewable Energy Supply in Germany, If New PV Systems Are Installed with East-West Tracking Systems at Increased Elevation Angles.” Proceedings of the 37th European Photovoltaic Solar Energy Conference, 07 - 11 September 2020, 2020, pp. 1818–19, doi:10.4229/EUPVSEC20202020-6BV.5.10. short: 'S. Krauter, D. Rustemovic, A. Khatibi, in: Proceedings of the 37th European Photovoltaic Solar Energy Conference, 07 - 11 September 2020, 2020, pp. 1818–1819.' conference: end_date: 2020-09-11 location: online name: 37th European Photovoltaic Solar Energy Conference and Exhibition (EUPVSEC 2020) start_date: 2020-09-07 date_created: 2020-09-14T12:42:30Z date_updated: 2022-01-06T13:43:51Z ddc: - '620' department: - _id: '53' doi: 10.4229/EUPVSEC20202020-6BV.5.10 file: - access_level: closed content_type: application/pdf creator: krauter date_created: 2022-01-06T13:41:20Z date_updated: 2022-01-06T13:41:20Z file_id: '29178' file_name: Krauter Rustemovic Khatibi - Elevated Angle - EUPVSEC 2020.pdf file_size: 428312 relation: main_file success: 1 file_date_updated: 2022-01-06T13:41:20Z has_accepted_license: '1' keyword: - Energy Storage - PV system integration - Large Grid-connected PV systems - Simulation - Energy Supply Options language: - iso: eng page: 1818 - 1819 publication: Proceedings of the 37th European Photovoltaic Solar Energy Conference, 07 - 11 September 2020 publication_identifier: isbn: - 3-936338-73-6 publication_status: published quality_controlled: '1' status: public title: Reduction of required storage capacities for a 100% renewable energy supply in Germany, if new PV systems are installed with east-west tracking systems at increased elevation angles type: conference user_id: '28836' year: '2020' ... --- _id: '33263' abstract: - lang: eng text: Dynamical systems often admit geometric properties that must be taken into account when studying their behavior. We show that many such properties can be encoded by means of quiver representations. These properties include classical symmetry, hidden symmetry, and feedforward structure, as well as subnetwork and quotient relations in network dynamical systems. A quiver equivariant dynamical system consists of a collection of dynamical systems with maps between them that send solutions to solutions. We prove that such quiver structures are preserved under Lyapunov--Schmidt reduction, center manifold reduction, and normal form reduction. author: - first_name: Eddie full_name: Nijholt, Eddie last_name: Nijholt - first_name: Bob W. full_name: Rink, Bob W. last_name: Rink - first_name: Sören full_name: Schwenker, Sören id: '97359' last_name: Schwenker orcid: 0000-0002-8054-2058 citation: ama: Nijholt E, Rink BW, Schwenker S. Quiver Representations and Dimension Reduction in Dynamical Systems. SIAM Journal on Applied Dynamical Systems. 2020;19(4):2428-2468. doi:10.1137/20m1345670 apa: Nijholt, E., Rink, B. W., & Schwenker, S. (2020). Quiver Representations and Dimension Reduction in Dynamical Systems. SIAM Journal on Applied Dynamical Systems, 19(4), 2428–2468. https://doi.org/10.1137/20m1345670 bibtex: '@article{Nijholt_Rink_Schwenker_2020, title={Quiver Representations and Dimension Reduction in Dynamical Systems}, volume={19}, DOI={10.1137/20m1345670}, number={4}, journal={SIAM Journal on Applied Dynamical Systems}, publisher={Society for Industrial & Applied Mathematics (SIAM)}, author={Nijholt, Eddie and Rink, Bob W. and Schwenker, Sören}, year={2020}, pages={2428–2468} }' chicago: 'Nijholt, Eddie, Bob W. Rink, and Sören Schwenker. “Quiver Representations and Dimension Reduction in Dynamical Systems.” SIAM Journal on Applied Dynamical Systems 19, no. 4 (2020): 2428–68. https://doi.org/10.1137/20m1345670.' ieee: 'E. Nijholt, B. W. Rink, and S. Schwenker, “Quiver Representations and Dimension Reduction in Dynamical Systems,” SIAM Journal on Applied Dynamical Systems, vol. 19, no. 4, pp. 2428–2468, 2020, doi: 10.1137/20m1345670.' mla: Nijholt, Eddie, et al. “Quiver Representations and Dimension Reduction in Dynamical Systems.” SIAM Journal on Applied Dynamical Systems, vol. 19, no. 4, Society for Industrial & Applied Mathematics (SIAM), 2020, pp. 2428–68, doi:10.1137/20m1345670. short: E. Nijholt, B.W. Rink, S. Schwenker, SIAM Journal on Applied Dynamical Systems 19 (2020) 2428–2468. date_created: 2022-09-06T11:37:42Z date_updated: 2022-09-07T08:36:03Z doi: 10.1137/20m1345670 extern: '1' external_id: arxiv: - '2006.08073' intvolume: ' 19' issue: '4' keyword: - Modeling and Simulation - Analysis language: - iso: eng page: 2428-2468 publication: SIAM Journal on Applied Dynamical Systems publication_identifier: issn: - 1536-0040 publication_status: published publisher: Society for Industrial & Applied Mathematics (SIAM) status: public title: Quiver Representations and Dimension Reduction in Dynamical Systems type: journal_article user_id: '97359' volume: 19 year: '2020' ... --- _id: '34670' author: - first_name: Tobias full_name: Black, Tobias id: '23686' last_name: Black orcid: 0000-0001-9963-0800 citation: ama: Black T. Global generalized solutions to a forager–exploiter model with superlinear degradation and their eventual regularity properties. Mathematical Models and Methods in Applied Sciences. 2020;30(06):1075-1117. doi:10.1142/s0218202520400072 apa: Black, T. (2020). Global generalized solutions to a forager–exploiter model with superlinear degradation and their eventual regularity properties. Mathematical Models and Methods in Applied Sciences, 30(06), 1075–1117. https://doi.org/10.1142/s0218202520400072 bibtex: '@article{Black_2020, title={Global generalized solutions to a forager–exploiter model with superlinear degradation and their eventual regularity properties}, volume={30}, DOI={10.1142/s0218202520400072}, number={06}, journal={Mathematical Models and Methods in Applied Sciences}, publisher={World Scientific Pub Co Pte Lt}, author={Black, Tobias}, year={2020}, pages={1075–1117} }' chicago: 'Black, Tobias. “Global Generalized Solutions to a Forager–Exploiter Model with Superlinear Degradation and Their Eventual Regularity Properties.” Mathematical Models and Methods in Applied Sciences 30, no. 06 (2020): 1075–1117. https://doi.org/10.1142/s0218202520400072.' ieee: 'T. Black, “Global generalized solutions to a forager–exploiter model with superlinear degradation and their eventual regularity properties,” Mathematical Models and Methods in Applied Sciences, vol. 30, no. 06, pp. 1075–1117, 2020, doi: 10.1142/s0218202520400072.' mla: Black, Tobias. “Global Generalized Solutions to a Forager–Exploiter Model with Superlinear Degradation and Their Eventual Regularity Properties.” Mathematical Models and Methods in Applied Sciences, vol. 30, no. 06, World Scientific Pub Co Pte Lt, 2020, pp. 1075–117, doi:10.1142/s0218202520400072. short: T. Black, Mathematical Models and Methods in Applied Sciences 30 (2020) 1075–1117. date_created: 2022-12-21T09:48:11Z date_updated: 2023-07-10T11:39:59Z department: - _id: '34' - _id: '10' - _id: '90' doi: 10.1142/s0218202520400072 intvolume: ' 30' issue: '06' keyword: - Applied Mathematics - Modeling and Simulation language: - iso: eng page: 1075-1117 publication: Mathematical Models and Methods in Applied Sciences publication_identifier: issn: - 0218-2025 - 1793-6314 publication_status: published publisher: World Scientific Pub Co Pte Lt status: public title: Global generalized solutions to a forager–exploiter model with superlinear degradation and their eventual regularity properties type: journal_article user_id: '23686' volume: 30 year: '2020' ... --- _id: '15332' abstract: - lang: eng text: "Artificial intelligence (AI) has the potential for far-reaching – in our opinion – irreversible changes.\r\nThey range from effects on the individual and society to new societal and social issues. The question arises\r\nas to how students can learn the basic functioning of AI systems, what areas of life and society are affected\r\nby these and – most important – how their own lives are affected by these changes. Therefore, we are developing and evaluating school materials for the German ”Science Year AI”. It can be used for students of all\r\nschool types from the seventh grade upwards and will be distributed to about 2000 schools in autumn with\r\nthe support of the Federal Ministry of Education and Research. The material deals with the following aspects\r\nof AI: Discussing everyday experiences with AI, how does machine learning work, historical development\r\nof AI concepts, difference between man and machine, future distribution of roles between man and machine,\r\nin which AI world do we want to live and how much AI would we like to have in our lives. Through an\r\naccompanying evaluation, high quality of the technical content and didactic preparation is achieved in order\r\nto guarantee the long-term applicability in the teaching context in the different age groups and school types.\r\nIn this paper, we describe the current state of the material development, the challenges arising, and the results\r\nof tests with different classes to date. We also present first ideas for evaluating the results." author: - first_name: Michael full_name: Schlichtig, Michael id: '32312' last_name: Schlichtig orcid: 0000-0001-6600-6171 - first_name: Simone Anna full_name: Opel, Simone Anna id: '72932' last_name: Opel - first_name: Lea full_name: Budde, Lea id: '32443' last_name: Budde - first_name: Carsten full_name: Schulte, Carsten id: '60311' last_name: Schulte citation: ama: 'Schlichtig M, Opel SA, Budde L, Schulte C. Understanding Artificial Intelligence – A Project for the Development of Comprehensive Teaching Material. In: Jasutė E, Pozdniakov S, eds. ISSEP 2019 - 12th International Conference on Informatics in Schools: Situation, Evaluation and Perspectives, Local Proceedings. Vol 12. ; 2019:65-73.' apa: 'Schlichtig, M., Opel, S. A., Budde, L., & Schulte, C. (2019). Understanding Artificial Intelligence – A Project for the Development of Comprehensive Teaching Material. In E. Jasutė & S. Pozdniakov (Eds.), ISSEP 2019 - 12th International conference on informatics in schools: Situation, evaluation and perspectives, Local Proceedings (Vol. 12, pp. 65–73).' bibtex: '@inproceedings{Schlichtig_Opel_Budde_Schulte_2019, title={Understanding Artificial Intelligence – A Project for the Development of Comprehensive Teaching Material}, volume={12}, booktitle={ISSEP 2019 - 12th International conference on informatics in schools: Situation, evaluation and perspectives, Local Proceedings}, author={Schlichtig, Michael and Opel, Simone Anna and Budde, Lea and Schulte, Carsten}, editor={Jasutė, Eglė and Pozdniakov, Sergei}, year={2019}, pages={65–73} }' chicago: 'Schlichtig, Michael, Simone Anna Opel, Lea Budde, and Carsten Schulte. “Understanding Artificial Intelligence – A Project for the Development of Comprehensive Teaching Material.” In ISSEP 2019 - 12th International Conference on Informatics in Schools: Situation, Evaluation and Perspectives, Local Proceedings, edited by Eglė Jasutė and Sergei Pozdniakov, 12:65–73, 2019.' ieee: 'M. Schlichtig, S. A. Opel, L. Budde, and C. Schulte, “Understanding Artificial Intelligence – A Project for the Development of Comprehensive Teaching Material,” in ISSEP 2019 - 12th International conference on informatics in schools: Situation, evaluation and perspectives, Local Proceedings, Lanarca, 2019, vol. 12, pp. 65–73.' mla: 'Schlichtig, Michael, et al. “Understanding Artificial Intelligence – A Project for the Development of Comprehensive Teaching Material.” ISSEP 2019 - 12th International Conference on Informatics in Schools: Situation, Evaluation and Perspectives, Local Proceedings, edited by Eglė Jasutė and Sergei Pozdniakov, vol. 12, 2019, pp. 65–73.' short: 'M. Schlichtig, S.A. Opel, L. Budde, C. Schulte, in: E. Jasutė, S. Pozdniakov (Eds.), ISSEP 2019 - 12th International Conference on Informatics in Schools: Situation, Evaluation and Perspectives, Local Proceedings, 2019, pp. 65–73.' conference: end_date: 2019-11-20 location: Lanarca name: 'ISSEP 2019 - 12th International conference on informatics in schools: Situation, evaluation and perspectives' start_date: 2019-11-18 date_created: 2019-12-16T17:50:08Z date_updated: 2022-07-26T11:41:41Z department: - _id: '67' editor: - first_name: Eglė full_name: Jasutė, Eglė last_name: Jasutė - first_name: Sergei full_name: Pozdniakov, Sergei last_name: Pozdniakov intvolume: ' 12' keyword: - Artificial Intelligence - Machine Learning - Teaching Material - Societal Aspects - Ethics. Social Aspects - Science Year - Simulation Game language: - iso: eng main_file_link: - url: http://cyprusconferences.org/issep2019/wp-content/uploads/2019/10/LocalISSEP-v5.pdf page: 65 - 73 publication: 'ISSEP 2019 - 12th International conference on informatics in schools: Situation, evaluation and perspectives, Local Proceedings' publication_identifier: isbn: - 978-9925-553-27-3 publication_status: published quality_controlled: '1' status: public title: Understanding Artificial Intelligence – A Project for the Development of Comprehensive Teaching Material type: conference user_id: '32312' volume: 12 year: '2019' ... --- _id: '41958' abstract: - lang: ger text: Das Nasspressverfahren ist ein Serienherstellungsprozess für Bauteile aus duroplastischen Faserverbundkunststoffen (FVK) mit einer geringen Geometriekomplexität. Im Rahmen dieser Arbeit wurde ein modifiziertes Nasspressverfahren untersucht, welches die Herstellung von hybriden Blech-FVK-Strukturen ermöglicht. Die stoffschlüssige Verbindung zwischen dem metallischen Trägerbauteil und einem lokalen FVK-Verstärkungselement wird durch Co-Bonding im Nasspresswerkzeug aufgebaut. Epoxidbasierte Matrixharze und Klebstoffe wurden mit Methoden der Klebtechnik sowie thermischen und rheometrischen Prüfungen charakterisiert, um ein materialspezifisches Fertigungsprozessfenster einzugrenzen. Experimentelle Untersuchungen zum Nasspressen von GFK-Laminaten und Stahl-GFK-Hybridstrukturen fokussierten die Mikrostruktur und das strukturelle Verhalten von stoffschlüssigen Hybridverbindungen. Unter anderem wurden Einflüsse von zeit-, temperatur- und druckabhängigen Fertigungsparametern sowie der Einsatz von Strukturklebstofffilmen und internen Trennmitteln analysiert. Anhand von Fallturmtests an hybriden Demonstratorkomponenten konnte das modifizierte Nasspressverfahren für die Herstellung crashrelevanter Karosseriebauteile qualifiziert werden. author: - first_name: Hermann full_name: Opdemom, Hermann last_name: Opdemom citation: ama: Opdemom H. Experimentelle Untersuchung einse modifzierten Nasspressverfahrens für die Herstellung von hybriden Metall-Faserverbundkunststoff-Bauteilen. Vol 2019,35. Shaker Verlag; 2019. apa: 'Opdemom, H. (2019). Experimentelle Untersuchung einse modifzierten Nasspressverfahrens für die Herstellung von hybriden Metall-Faserverbundkunststoff-Bauteilen: Vol. 2019,35. Shaker Verlag.' bibtex: '@book{Opdemom_2019, series={Schriftenreihe Institut für Leichtbau mit Hybridsystemen}, title={Experimentelle Untersuchung einse modifzierten Nasspressverfahrens für die Herstellung von hybriden Metall-Faserverbundkunststoff-Bauteilen}, volume={2019,35}, publisher={Shaker Verlag}, author={Opdemom, Hermann}, year={2019}, collection={Schriftenreihe Institut für Leichtbau mit Hybridsystemen} }' chicago: Opdemom, Hermann. Experimentelle Untersuchung einse modifzierten Nasspressverfahrens für die Herstellung von hybriden Metall-Faserverbundkunststoff-Bauteilen. Vol. 2019,35. Schriftenreihe Institut für Leichtbau mit Hybridsystemen. Shaker Verlag, 2019. ieee: H. Opdemom, Experimentelle Untersuchung einse modifzierten Nasspressverfahrens für die Herstellung von hybriden Metall-Faserverbundkunststoff-Bauteilen, vol. 2019,35. Shaker Verlag, 2019. mla: Opdemom, Hermann. Experimentelle Untersuchung einse modifzierten Nasspressverfahrens für die Herstellung von hybriden Metall-Faserverbundkunststoff-Bauteilen. Shaker Verlag, 2019. short: H. Opdemom, Experimentelle Untersuchung einse modifzierten Nasspressverfahrens für die Herstellung von hybriden Metall-Faserverbundkunststoff-Bauteilen, Shaker Verlag, 2019. date_created: 2023-02-10T11:24:40Z date_updated: 2023-02-10T11:24:47Z department: - _id: '9' - _id: '149' - _id: '321' keyword: - Leichtbau - Faserverbundkunststoffe - Nasspressverfahren - Hybridbauteile - Rheologie - Klebtechnik - Co-Bonding language: - iso: ger page: '178' publication_identifier: isbn: - 978-3-8440-6428-5 publication_status: published publisher: Shaker Verlag series_title: Schriftenreihe Institut für Leichtbau mit Hybridsystemen status: public supervisor: - first_name: Thomas full_name: Tröster, Thomas id: '553' last_name: Tröster title: Experimentelle Untersuchung einse modifzierten Nasspressverfahrens für die Herstellung von hybriden Metall-Faserverbundkunststoff-Bauteilen type: dissertation user_id: '15952' volume: 2019,35 year: '2019' ... --- _id: '10000' abstract: - lang: eng text: Ultraschall wird zur Effizienzsteigerung in verfahrenstechnischen Prozessen eingesetzt. Die Betriebsparamter der Ultraschallsysteme werden empirisch ermittelt, da derzeit keine systematische Analyse der Wechselwirkung zwischen Ultraschallwandler und Schallfeld sowie kein Verfahren zur Messung der Kavitationsaktivität ohne zusätzlichen Sensor existieren. Auf Basis einer experimentellen Analyse des betrachteten sonochemischen Reaktors wird ein Finite-Elemente-Modell aufgebaut, das die Wechselwirkung zwischen Schallfeld und Ultraschallwandler berücksichtigt. Die modellbasierte Analyse zeigt, dass wegen der akustischen Eigenschaften des Autoklavs nur direkt an der Sonotrode Kavitation entsteht. Die Wechselwirkung zwischen Ultraschallwandler und Schallfeld ermöglicht Aussagen über das Schallfeld und die Kavitationsaktivität auf Basis der Rückwirkung auf den Ultraschallwandler. Die lineare Schalldruckverteilung ermöglicht eine Prognose über die Verteilung von Kavitationszonen. Das beschriebene Modell liefert wertvolle Erkenntnisse für die Auslegung, Analyse und Skalierung sonochemischer Reaktoren. Auf Grund der rauen Prozessrandbedingungen ist die Applikation von Sensoren zur Überwachung der Kavitationsaktivität in vielen sonochemischen Prozessen nicht möglich. Zur prozessbegleitenden Messung der Kavitationsaktivität wird ein Verfahren entwickelt, das die Bewertung der Kavitationsaktivität durch Auswertung der Rückwirkung auf den Ultraschallwandler erlaubt. Das Messverfahren ermöglicht eine vorhersagbare und reproduzierbare Durchführung kavitationsbasierter Prozesse und stellt eine wichtige Erweiterung für bestehende und neue Ultraschallsysteme dar. author: - first_name: Peter full_name: Bornmann, Peter last_name: Bornmann citation: ama: Bornmann P. Modellierung Und Experimentelle Charakterisierung Der Wechselwirkung Zwischen Ultraschallwandler Und Flüssigkeit in Kavitationsbasierten Prozessen. Shaker; 2019. apa: Bornmann, P. (2019). Modellierung und experimentelle Charakterisierung der Wechselwirkung zwischen Ultraschallwandler und Flüssigkeit in kavitationsbasierten Prozessen. Shaker. bibtex: '@book{Bornmann_2019, title={Modellierung und experimentelle Charakterisierung der Wechselwirkung zwischen Ultraschallwandler und Flüssigkeit in kavitationsbasierten Prozessen}, publisher={Shaker}, author={Bornmann, Peter}, year={2019} }' chicago: Bornmann, Peter. Modellierung Und Experimentelle Charakterisierung Der Wechselwirkung Zwischen Ultraschallwandler Und Flüssigkeit in Kavitationsbasierten Prozessen. Shaker, 2019. ieee: P. Bornmann, Modellierung und experimentelle Charakterisierung der Wechselwirkung zwischen Ultraschallwandler und Flüssigkeit in kavitationsbasierten Prozessen. Shaker, 2019. mla: Bornmann, Peter. Modellierung Und Experimentelle Charakterisierung Der Wechselwirkung Zwischen Ultraschallwandler Und Flüssigkeit in Kavitationsbasierten Prozessen. Shaker, 2019. short: P. Bornmann, Modellierung Und Experimentelle Charakterisierung Der Wechselwirkung Zwischen Ultraschallwandler Und Flüssigkeit in Kavitationsbasierten Prozessen, Shaker, 2019. date_created: 2019-05-27T10:29:53Z date_updated: 2023-09-15T12:23:55Z department: - _id: '151' keyword: - Sonochemie - Akustische Kavitation - Kavitationsmessung - Kavitationsdetektion - FEM-Simulation Ultraschallwandler - Prozessüberwachung - FEM-Simulation Schallfeld - Self-Sensing - Piezoelektrische Ultraschallwandler - Ultraschallreinigung language: - iso: eng publisher: Shaker status: public title: Modellierung und experimentelle Charakterisierung der Wechselwirkung zwischen Ultraschallwandler und Flüssigkeit in kavitationsbasierten Prozessen type: dissertation user_id: '210' year: '2019' ... --- _id: '64018' abstract: - lang: eng text: CO oxidation is an extensively studied reaction in heterogeneous catalysis due to its seeming simplicity and its great importance for emission control. However, the role of particle size and more specifically structure sensitivity in this reaction is still controversial. In the present study, colloidal “surfactant-free” Pt nanoparticles (NPs) in a size regime of 1–4 nm with narrow size distribution and control over particle size were synthesized and subsequently supported on Al2O3 to prepare model catalysts. CO oxidation was performed using Pt NPs catalysts with particles sizes of 1, 2, 3, and 4 nm at different reaction temperatures. It is shown that the reaction exhibits a particle size effect that depends strongly on the reaction conditions. At 170 °C, the reaction seems to proceed within the same kinetic regime for all particle sizes, but the surface normalized activity depends strongly on the particle size, with maximum activity for nanoparticles 2 nm in diameter. A temperature increase to 200 °C leads to a change of the kinetic regime that depends on the particle size. For Pt NPs 1 nm in diameter a reaction order of 1 for O2 was observed, indicating that O2 adsorbs molecularly and dissociates in a following step, which represents the generally accepted mechanism on Pt surfaces. The reaction order of −1 for CO demonstrates that the surface is saturated with CO under reaction conditions. With increasing particle size, the reaction orders of O2 and CO change. For particles 2 nm in size, an increase in temperature also results in reaction orders of 1 for O2 and −1 for CO; NPs of 3 and 4 nm, even at higher temperatures, show no clear kinetic behavior that can be explained by a single reaction mechanism. Instead, the Boudouard reaction between two adjacent adsorbed CO molecules was identified as an important additional reaction pathway that occurs preferentially on large particles and causes more complex kinetics. author: - first_name: Sarah full_name: Neumann, Sarah last_name: Neumann - first_name: Torsten full_name: Gutmann, Torsten id: '118165' last_name: Gutmann - first_name: Gerd full_name: Buntkowsky, Gerd last_name: Buntkowsky - first_name: Stephen full_name: Paul, Stephen last_name: Paul - first_name: Greg full_name: Thiele, Greg last_name: Thiele - first_name: Heiko full_name: Sievers, Heiko last_name: Sievers - first_name: Marcus full_name: Bäumer, Marcus last_name: Bäumer - first_name: Sebastian full_name: Kunz, Sebastian last_name: Kunz citation: ama: Neumann S, Gutmann T, Buntkowsky G, et al. Insights into the reaction mechanism and particle size effects of CO oxidation over supported Pt nanoparticle catalysts. Journal of Catalysis. 2019;377:662–672. doi:10.1016/j.jcat.2019.07.049 apa: Neumann, S., Gutmann, T., Buntkowsky, G., Paul, S., Thiele, G., Sievers, H., Bäumer, M., & Kunz, S. (2019). Insights into the reaction mechanism and particle size effects of CO oxidation over supported Pt nanoparticle catalysts. Journal of Catalysis, 377, 662–672. https://doi.org/10.1016/j.jcat.2019.07.049 bibtex: '@article{Neumann_Gutmann_Buntkowsky_Paul_Thiele_Sievers_Bäumer_Kunz_2019, title={Insights into the reaction mechanism and particle size effects of CO oxidation over supported Pt nanoparticle catalysts}, volume={377}, DOI={10.1016/j.jcat.2019.07.049}, journal={Journal of Catalysis}, author={Neumann, Sarah and Gutmann, Torsten and Buntkowsky, Gerd and Paul, Stephen and Thiele, Greg and Sievers, Heiko and Bäumer, Marcus and Kunz, Sebastian}, year={2019}, pages={662–672} }' chicago: 'Neumann, Sarah, Torsten Gutmann, Gerd Buntkowsky, Stephen Paul, Greg Thiele, Heiko Sievers, Marcus Bäumer, and Sebastian Kunz. “Insights into the Reaction Mechanism and Particle Size Effects of CO Oxidation over Supported Pt Nanoparticle Catalysts.” Journal of Catalysis 377 (2019): 662–672. https://doi.org/10.1016/j.jcat.2019.07.049.' ieee: 'S. Neumann et al., “Insights into the reaction mechanism and particle size effects of CO oxidation over supported Pt nanoparticle catalysts,” Journal of Catalysis, vol. 377, pp. 662–672, 2019, doi: 10.1016/j.jcat.2019.07.049.' mla: Neumann, Sarah, et al. “Insights into the Reaction Mechanism and Particle Size Effects of CO Oxidation over Supported Pt Nanoparticle Catalysts.” Journal of Catalysis, vol. 377, 2019, pp. 662–672, doi:10.1016/j.jcat.2019.07.049. short: S. Neumann, T. Gutmann, G. Buntkowsky, S. Paul, G. Thiele, H. Sievers, M. Bäumer, S. Kunz, Journal of Catalysis 377 (2019) 662–672. date_created: 2026-02-07T16:02:06Z date_updated: 2026-02-17T16:14:45Z doi: 10.1016/j.jcat.2019.07.049 extern: '1' intvolume: ' 377' keyword: - Solid state NMR - “Surfactant-free” platinum nanoparticles - CO oxidation - Particle size effect - Structure sensitivity language: - iso: eng page: 662–672 publication: Journal of Catalysis status: public title: Insights into the reaction mechanism and particle size effects of CO oxidation over supported Pt nanoparticle catalysts type: journal_article user_id: '100715' volume: 377 year: '2019' ... --- _id: '10598' abstract: - lang: eng text: "Approximate computing has become a very popular design\r\nstrategy that exploits error resilient computations to achieve higher\r\nperformance and energy efficiency. Automated synthesis of approximate\r\ncircuits is performed via functional approximation, in which various\r\nparts of the target circuit are extensively examined with a library\r\nof approximate components/transformations to trade off the functional\r\naccuracy and computational budget (i.e., power). However, as the number\r\nof possible approximate transformations increases, traditional search\r\ntechniques suffer from a combinatorial explosion due to the large\r\nbranching factor. In this work, we present a comprehensive framework\r\nfor automated synthesis of approximate circuits from either structural\r\nor behavioral descriptions. We adapt the Monte Carlo Tree Search\r\n(MCTS), as a stochastic search technique, to deal with the large design\r\nspace exploration, which enables a broader range of potential possible\r\napproximations through lightweight random simulations. The proposed\r\nframework is able to recognize the design Pareto set even with low\r\ncomputational budgets. Experimental results highlight the capabilities of\r\nthe proposed synthesis framework by resulting in up to 61.69% energy\r\nsaving while maintaining the predefined quality constraints." author: - first_name: Muhammad full_name: Awais, Muhammad id: '64665' last_name: Awais orcid: https://orcid.org/0000-0003-4148-2969 - first_name: Hassan full_name: Ghasemzadeh Mohammadi, Hassan id: '61186' last_name: Ghasemzadeh Mohammadi - first_name: Marco full_name: Platzner, Marco id: '398' last_name: Platzner citation: ama: 'Awais M, Ghasemzadeh Mohammadi H, Platzner M. An MCTS-based Framework for Synthesis of Approximate Circuits. In: 26th IFIP/IEEE International Conference on Very Large Scale Integration (VLSI-SoC). ; 2018:219-224. doi:10.1109/VLSI-SoC.2018.8645026' apa: Awais, M., Ghasemzadeh Mohammadi, H., & Platzner, M. (2018). An MCTS-based Framework for Synthesis of Approximate Circuits. In 26th IFIP/IEEE International Conference on Very Large Scale Integration (VLSI-SoC) (pp. 219–224). https://doi.org/10.1109/VLSI-SoC.2018.8645026 bibtex: '@inproceedings{Awais_Ghasemzadeh Mohammadi_Platzner_2018, title={An MCTS-based Framework for Synthesis of Approximate Circuits}, DOI={10.1109/VLSI-SoC.2018.8645026}, booktitle={26th IFIP/IEEE International Conference on Very Large Scale Integration (VLSI-SoC)}, author={Awais, Muhammad and Ghasemzadeh Mohammadi, Hassan and Platzner, Marco}, year={2018}, pages={219–224} }' chicago: Awais, Muhammad, Hassan Ghasemzadeh Mohammadi, and Marco Platzner. “An MCTS-Based Framework for Synthesis of Approximate Circuits.” In 26th IFIP/IEEE International Conference on Very Large Scale Integration (VLSI-SoC), 219–24, 2018. https://doi.org/10.1109/VLSI-SoC.2018.8645026. ieee: M. Awais, H. Ghasemzadeh Mohammadi, and M. Platzner, “An MCTS-based Framework for Synthesis of Approximate Circuits,” in 26th IFIP/IEEE International Conference on Very Large Scale Integration (VLSI-SoC), 2018, pp. 219–224. mla: Awais, Muhammad, et al. “An MCTS-Based Framework for Synthesis of Approximate Circuits.” 26th IFIP/IEEE International Conference on Very Large Scale Integration (VLSI-SoC), 2018, pp. 219–24, doi:10.1109/VLSI-SoC.2018.8645026. short: 'M. Awais, H. Ghasemzadeh Mohammadi, M. Platzner, in: 26th IFIP/IEEE International Conference on Very Large Scale Integration (VLSI-SoC), 2018, pp. 219–224.' date_created: 2019-07-10T09:21:38Z date_updated: 2022-01-06T06:50:46Z department: - _id: '78' doi: 10.1109/VLSI-SoC.2018.8645026 keyword: - Approximate computing - High-level synthesis - Accuracy - Monte-Carlo tree search - Circuit simulation language: - iso: eng page: 219-224 publication: 26th IFIP/IEEE International Conference on Very Large Scale Integration (VLSI-SoC) status: public title: An MCTS-based Framework for Synthesis of Approximate Circuits type: conference user_id: '64665' year: '2018' ... --- _id: '30935' author: - first_name: Juliane full_name: Anderski, Juliane last_name: Anderski - first_name: Laura full_name: Mahlert, Laura last_name: Mahlert - first_name: Jingjiang full_name: Sun, Jingjiang last_name: Sun - first_name: Wolfgang full_name: Birnbaum, Wolfgang last_name: Birnbaum - first_name: Dennis full_name: Mulac, Dennis last_name: Mulac - first_name: Sebastian full_name: Schreiber, Sebastian last_name: Schreiber - first_name: Fabian full_name: Herrmann, Fabian last_name: Herrmann - first_name: Dirk full_name: Kuckling, Dirk id: '287' last_name: Kuckling - first_name: Klaus full_name: Langer, Klaus last_name: Langer citation: ama: Anderski J, Mahlert L, Sun J, et al. Light-responsive nanoparticles based on new polycarbonate polymers as innovative drug delivery systems for photosensitizers in PDT. International Journal of Pharmaceutics. 2018;557:182-191. doi:10.1016/j.ijpharm.2018.12.040 apa: Anderski, J., Mahlert, L., Sun, J., Birnbaum, W., Mulac, D., Schreiber, S., Herrmann, F., Kuckling, D., & Langer, K. (2018). Light-responsive nanoparticles based on new polycarbonate polymers as innovative drug delivery systems for photosensitizers in PDT. International Journal of Pharmaceutics, 557, 182–191. https://doi.org/10.1016/j.ijpharm.2018.12.040 bibtex: '@article{Anderski_Mahlert_Sun_Birnbaum_Mulac_Schreiber_Herrmann_Kuckling_Langer_2018, title={Light-responsive nanoparticles based on new polycarbonate polymers as innovative drug delivery systems for photosensitizers in PDT}, volume={557}, DOI={10.1016/j.ijpharm.2018.12.040}, journal={International Journal of Pharmaceutics}, publisher={Elsevier BV}, author={Anderski, Juliane and Mahlert, Laura and Sun, Jingjiang and Birnbaum, Wolfgang and Mulac, Dennis and Schreiber, Sebastian and Herrmann, Fabian and Kuckling, Dirk and Langer, Klaus}, year={2018}, pages={182–191} }' chicago: 'Anderski, Juliane, Laura Mahlert, Jingjiang Sun, Wolfgang Birnbaum, Dennis Mulac, Sebastian Schreiber, Fabian Herrmann, Dirk Kuckling, and Klaus Langer. “Light-Responsive Nanoparticles Based on New Polycarbonate Polymers as Innovative Drug Delivery Systems for Photosensitizers in PDT.” International Journal of Pharmaceutics 557 (2018): 182–91. https://doi.org/10.1016/j.ijpharm.2018.12.040.' ieee: 'J. Anderski et al., “Light-responsive nanoparticles based on new polycarbonate polymers as innovative drug delivery systems for photosensitizers in PDT,” International Journal of Pharmaceutics, vol. 557, pp. 182–191, 2018, doi: 10.1016/j.ijpharm.2018.12.040.' mla: Anderski, Juliane, et al. “Light-Responsive Nanoparticles Based on New Polycarbonate Polymers as Innovative Drug Delivery Systems for Photosensitizers in PDT.” International Journal of Pharmaceutics, vol. 557, Elsevier BV, 2018, pp. 182–91, doi:10.1016/j.ijpharm.2018.12.040. short: J. Anderski, L. Mahlert, J. Sun, W. Birnbaum, D. Mulac, S. Schreiber, F. Herrmann, D. Kuckling, K. Langer, International Journal of Pharmaceutics 557 (2018) 182–191. date_created: 2022-04-21T09:13:47Z date_updated: 2022-04-21T09:14:49Z department: - _id: '311' doi: 10.1016/j.ijpharm.2018.12.040 intvolume: ' 557' keyword: - NanoparticlesLight-responsive polymersPhotodynamic therapyPoly(lactic-co-glycolic acid)Intestinal cancer language: - iso: eng page: 182-191 publication: International Journal of Pharmaceutics publication_identifier: issn: - 0378-5173 publication_status: published publisher: Elsevier BV status: public title: Light-responsive nanoparticles based on new polycarbonate polymers as innovative drug delivery systems for photosensitizers in PDT type: journal_article user_id: '94' volume: 557 year: '2018' ... --- _id: '20868' abstract: - lang: eng text: 'This study proposes a simple theoretical framework that allows for assessing financial distress up to five years in advance. We jointly model financial distress by using two of its key driving factors: declining cash-generating ability and insufficient liquidity reserves. The model is based on stochastic processes and incorporates firm-level and industry-sector developments. A large-scale empirical implementation for US-listed firms over the period of 1980-2010 shows important improvements in the discriminatory accuracy and demonstrates incremental information content beyond state-of-the-art accounting and market-based prediction models. Consequently, this study might provide important ex ante warning signals for investors, regulators and practitioners.' author: - first_name: Sönke full_name: Sievers, Sönke id: '46447' last_name: Sievers - first_name: Jan full_name: Klobucnik, Jan last_name: Klobucnik - first_name: David full_name: Miersch, David last_name: Miersch citation: ama: 'Sievers S, Klobucnik J, Miersch D. Predicting Early Warning Signals of Financial Distress: Theory and Empirical Evidence.; 2017. doi:10.2139/ssrn.2237757' apa: 'Sievers, S., Klobucnik, J., & Miersch, D. (2017). Predicting Early Warning Signals of Financial Distress: Theory and Empirical Evidence. https://doi.org/10.2139/ssrn.2237757' bibtex: '@book{Sievers_Klobucnik_Miersch_2017, title={Predicting Early Warning Signals of Financial Distress: Theory and Empirical Evidence}, DOI={10.2139/ssrn.2237757}, author={Sievers, Sönke and Klobucnik, Jan and Miersch, David}, year={2017} }' chicago: 'Sievers, Sönke, Jan Klobucnik, and David Miersch. Predicting Early Warning Signals of Financial Distress: Theory and Empirical Evidence, 2017. https://doi.org/10.2139/ssrn.2237757.' ieee: 'S. Sievers, J. Klobucnik, and D. Miersch, Predicting Early Warning Signals of Financial Distress: Theory and Empirical Evidence. 2017.' mla: 'Sievers, Sönke, et al. Predicting Early Warning Signals of Financial Distress: Theory and Empirical Evidence. 2017, doi:10.2139/ssrn.2237757.' short: 'S. Sievers, J. Klobucnik, D. Miersch, Predicting Early Warning Signals of Financial Distress: Theory and Empirical Evidence, 2017.' date_created: 2021-01-05T11:44:45Z date_updated: 2022-01-06T06:54:41Z department: - _id: '275' doi: 10.2139/ssrn.2237757 jel: - C63 - C52 - C53 - G33 - M41 keyword: - Financial distress prediction - probability of default - accounting information - stochastic processes - simulation language: - iso: eng main_file_link: - url: https://papers.ssrn.com/sol3/papers.cfm?abstract_id=2237757 page: '84' publication_status: published status: public title: 'Predicting Early Warning Signals of Financial Distress: Theory and Empirical Evidence' type: working_paper user_id: '46447' year: '2017' ... --- _id: '9972' abstract: - lang: eng text: The transportation of dry fine powders is an emerging technologic task, as in biotechnology, pharmaceu-tical and coatings industry the particle sizes of processed powders get smaller and smaller. Fine powdersare primarily defined by the fact that adhesive and cohesive forces outweigh the weight forces, leadingto mostly unwanted agglomeration (clumping) and adhesion to surfaces. Thereby it gets more difficult touse conventional conveyor systems (e.g. pneumatic or vibratory conveyors) for transport. A rather newmethod for transporting these fine powders is based on ultrasonic vibrations, which are used to reducefriction between powder and substrate. Within this contribution an experimental set-up consisting of apipe, a solenoid actuator for axial vibration and an annular piezoelectric actuator for the high frequencyradial vibration of the pipe is described. Since amplitudes of the radial pipe vibration should be as large aspossible to get high effects of friction reduction, the pipe is excited to vibrate in resonance. To determinethe optimum excitation frequency and actuator position the vibration modes and resonance frequenciesof the pipe are calculated and measured. Results are in good accordance. author: - first_name: Paul full_name: Dunst, Paul id: '22130' last_name: Dunst - first_name: Tobias full_name: Hemsel, Tobias id: '210' last_name: Hemsel - first_name: Walter full_name: Sextro, Walter id: '21220' last_name: Sextro citation: ama: Dunst P, Hemsel T, Sextro W. Analysis of pipe vibration in an ultrasonic powder transportationsystem. elsevier. 2017;Sensors and Actuators A 263:733-736. apa: Dunst, P., Hemsel, T., & Sextro, W. (2017). Analysis of pipe vibration in an ultrasonic powder transportationsystem. Elsevier, Sensors and Actuators A 263, 733–736. bibtex: '@article{Dunst_Hemsel_Sextro_2017, title={Analysis of pipe vibration in an ultrasonic powder transportationsystem}, volume={Sensors and Actuators A 263}, journal={elsevier}, author={Dunst, Paul and Hemsel, Tobias and Sextro, Walter}, year={2017}, pages={733–736} }' chicago: 'Dunst, Paul, Tobias Hemsel, and Walter Sextro. “Analysis of Pipe Vibration in an Ultrasonic Powder Transportationsystem.” Elsevier Sensors and Actuators A 263 (2017): 733–36.' ieee: P. Dunst, T. Hemsel, and W. Sextro, “Analysis of pipe vibration in an ultrasonic powder transportationsystem,” elsevier, vol. Sensors and Actuators A 263, pp. 733–736, 2017. mla: Dunst, Paul, et al. “Analysis of Pipe Vibration in an Ultrasonic Powder Transportationsystem.” Elsevier, vol. Sensors and Actuators A 263, 2017, pp. 733–36. short: P. Dunst, T. Hemsel, W. Sextro, Elsevier Sensors and Actuators A 263 (2017) 733–736. date_created: 2019-05-27T09:31:13Z date_updated: 2019-09-16T10:23:40Z department: - _id: '151' keyword: - Powder transport Piezoelectrics Ultrasonics Pipe vibration Finite element simulation Fine powder language: - iso: eng page: 733-736 publication: elsevier quality_controlled: '1' status: public title: Analysis of pipe vibration in an ultrasonic powder transportationsystem type: journal_article user_id: '55222' volume: Sensors and Actuators A 263 year: '2017' ... --- _id: '5199' abstract: - lang: eng text: 'This study proposes a simple theoretical framework that allows for assessing financial distress up to five years in advance. We jointly model financial distress by using two of its key driving factors: declining cash-generating ability and insufficient liquidity reserves. The model is based on stochastic processes and incorporates firm-level and industry-sector developments. A large-scale empirical implementation for US-listed firms over the period of 1980-2010 shows important improvements in the discriminatory accuracy and demonstrates incremental information content beyond state-of-the-art accounting and market-based prediction models. Consequently, this study might provide important ex ante warning signals for investors, regulators and practitioners. ' author: - first_name: Jan full_name: Klobucnik, Jan last_name: Klobucnik - first_name: David full_name: Miersch, David last_name: Miersch - first_name: Sönke full_name: Sievers, Sönke last_name: Sievers citation: ama: 'Klobucnik J, Miersch D, Sievers S. Predicting Early Warning Signals of Financial Distress: Theory and Empirical Evidence. SSRN Electronic Journal. 2017.' apa: 'Klobucnik, J., Miersch, D., & Sievers, S. (2017). Predicting Early Warning Signals of Financial Distress: Theory and Empirical Evidence. SSRN Electronic Journal.' bibtex: '@article{Klobucnik_Miersch_Sievers_2017, title={Predicting Early Warning Signals of Financial Distress: Theory and Empirical Evidence}, journal={SSRN Electronic Journal}, author={Klobucnik, Jan and Miersch, David and Sievers, Sönke}, year={2017} }' chicago: 'Klobucnik, Jan, David Miersch, and Sönke Sievers. “Predicting Early Warning Signals of Financial Distress: Theory and Empirical Evidence.” SSRN Electronic Journal, 2017.' ieee: 'J. Klobucnik, D. Miersch, and S. Sievers, “Predicting Early Warning Signals of Financial Distress: Theory and Empirical Evidence,” SSRN Electronic Journal, 2017.' mla: 'Klobucnik, Jan, et al. “Predicting Early Warning Signals of Financial Distress: Theory and Empirical Evidence.” SSRN Electronic Journal, 2017.' short: J. Klobucnik, D. Miersch, S. Sievers, SSRN Electronic Journal (2017). date_created: 2018-10-31T12:19:42Z date_updated: 2022-01-06T07:01:43Z department: - _id: '275' jel: - C63 - C52 - C53 - G33 - M41 keyword: - Financial distress prediction - probability of default - accounting information - stochastic processes - simulation language: - iso: eng publication: SSRN Electronic Journal publication_status: published status: public title: 'Predicting Early Warning Signals of Financial Distress: Theory and Empirical Evidence' type: journal_article user_id: '64756' year: '2017' ... --- _id: '9955' abstract: - lang: eng text: Wire bonding has been an established packaging technology for decades. When introducing copper as wire material for high power applications, adaptations to the bonding process and to machines became necessary. Here, challenges occur due to the stiffer wire material and changing oxide layers on the contact partners. To achieve sufficient process stability, a clean bond area is required, which can only be achieved with high shear stresses in the contact partners surfaces. These necessitate high normal forces to plastically deform the wire and substrate. To achieve such high stresses in the contact area, the bonding tool needs to be able to transmit the needed tangential forces to the top side of the wire. The wire itself performs a shear movement and transmits the force into the contact area to clean the contaminant and oxide layers and to level the desired bond surfaces. The main function of the tool is to transmit these forces. If the bond tool can only transmit low forces in the direction of excitation, the parameter space for a stable bond process is severely restricted. Here, a modeling approach to estimate how well different tool shapes meet the demand of transmitting high tangential forces is presented. The model depends on wire deformation and thus on the ultrasonic softening effect. author: - first_name: Simon full_name: Althoff, Simon last_name: Althoff - first_name: Tobias full_name: Meyer, Tobias last_name: Meyer - first_name: Andreas full_name: Unger, Andreas last_name: Unger - first_name: Walter full_name: Sextro, Walter id: '21220' last_name: Sextro - first_name: Florian full_name: Eacock, Florian last_name: Eacock citation: ama: 'Althoff S, Meyer T, Unger A, Sextro W, Eacock F. Shape-Dependent Transmittable Tangential Force of Wire Bond Tools. In: IEEE 66th Electronic Components and Technology Conference. ; 2016:2103-2110. doi:10.1109/ECTC.2016.234' apa: Althoff, S., Meyer, T., Unger, A., Sextro, W., & Eacock, F. (2016). Shape-Dependent Transmittable Tangential Force of Wire Bond Tools. In IEEE 66th Electronic Components and Technology Conference (pp. 2103–2110). https://doi.org/10.1109/ECTC.2016.234 bibtex: '@inproceedings{Althoff_Meyer_Unger_Sextro_Eacock_2016, title={Shape-Dependent Transmittable Tangential Force of Wire Bond Tools}, DOI={10.1109/ECTC.2016.234}, booktitle={IEEE 66th Electronic Components and Technology Conference}, author={Althoff, Simon and Meyer, Tobias and Unger, Andreas and Sextro, Walter and Eacock, Florian}, year={2016}, pages={2103–2110} }' chicago: Althoff, Simon, Tobias Meyer, Andreas Unger, Walter Sextro, and Florian Eacock. “Shape-Dependent Transmittable Tangential Force of Wire Bond Tools.” In IEEE 66th Electronic Components and Technology Conference, 2103–10, 2016. https://doi.org/10.1109/ECTC.2016.234. ieee: S. Althoff, T. Meyer, A. Unger, W. Sextro, and F. Eacock, “Shape-Dependent Transmittable Tangential Force of Wire Bond Tools,” in IEEE 66th Electronic Components and Technology Conference, 2016, pp. 2103–2110. mla: Althoff, Simon, et al. “Shape-Dependent Transmittable Tangential Force of Wire Bond Tools.” IEEE 66th Electronic Components and Technology Conference, 2016, pp. 2103–10, doi:10.1109/ECTC.2016.234. short: 'S. Althoff, T. Meyer, A. Unger, W. Sextro, F. Eacock, in: IEEE 66th Electronic Components and Technology Conference, 2016, pp. 2103–2110.' date_created: 2019-05-27T08:47:52Z date_updated: 2020-05-07T05:33:52Z department: - _id: '151' doi: 10.1109/ECTC.2016.234 keyword: - finite element simulation - wire bonding - tool geometry language: - iso: eng page: 2103-2110 project: - _id: '92' grant_number: 02 PQ2210 name: Intelligente Herstellung zuverlässiger Kupferbondverbindungen publication: IEEE 66th Electronic Components and Technology Conference quality_controlled: '1' status: public title: Shape-Dependent Transmittable Tangential Force of Wire Bond Tools type: conference user_id: '210' year: '2016' ... --- _id: '17659' author: - first_name: Gleb full_name: Polevoy, Gleb id: '83983' last_name: Polevoy - first_name: Stojan full_name: Trajanovski, Stojan last_name: Trajanovski - first_name: Mathijs M. full_name: de Weerdt, Mathijs M. last_name: de Weerdt citation: ama: 'Polevoy G, Trajanovski S, de Weerdt MM. Nash Equilibria in Shared Effort Games. In: Proceedings of the 2014 International Conference on Autonomous Agents and Multi-Agent Systems. AAMAS ’14. Richland, SC: International Foundation for Autonomous Agents and Multiagent Systems; 2014:861-868.' apa: 'Polevoy, G., Trajanovski, S., & de Weerdt, M. M. (2014). Nash Equilibria in Shared Effort Games. In Proceedings of the 2014 International Conference on Autonomous Agents and Multi-agent Systems (pp. 861–868). Richland, SC: International Foundation for Autonomous Agents and Multiagent Systems.' bibtex: '@inproceedings{Polevoy_Trajanovski_de Weerdt_2014, place={Richland, SC}, series={AAMAS ’14}, title={Nash Equilibria in Shared Effort Games}, booktitle={Proceedings of the 2014 International Conference on Autonomous Agents and Multi-agent Systems}, publisher={International Foundation for Autonomous Agents and Multiagent Systems}, author={Polevoy, Gleb and Trajanovski, Stojan and de Weerdt, Mathijs M.}, year={2014}, pages={861–868}, collection={AAMAS ’14} }' chicago: 'Polevoy, Gleb, Stojan Trajanovski, and Mathijs M. de Weerdt. “Nash Equilibria in Shared Effort Games.” In Proceedings of the 2014 International Conference on Autonomous Agents and Multi-Agent Systems, 861–68. AAMAS ’14. Richland, SC: International Foundation for Autonomous Agents and Multiagent Systems, 2014.' ieee: G. Polevoy, S. Trajanovski, and M. M. de Weerdt, “Nash Equilibria in Shared Effort Games,” in Proceedings of the 2014 International Conference on Autonomous Agents and Multi-agent Systems, 2014, pp. 861–868. mla: Polevoy, Gleb, et al. “Nash Equilibria in Shared Effort Games.” Proceedings of the 2014 International Conference on Autonomous Agents and Multi-Agent Systems, International Foundation for Autonomous Agents and Multiagent Systems, 2014, pp. 861–68. short: 'G. Polevoy, S. Trajanovski, M.M. de Weerdt, in: Proceedings of the 2014 International Conference on Autonomous Agents and Multi-Agent Systems, International Foundation for Autonomous Agents and Multiagent Systems, Richland, SC, 2014, pp. 861–868.' date_created: 2020-08-06T15:21:26Z date_updated: 2022-01-06T06:53:16Z department: - _id: '63' - _id: '541' extern: '1' keyword: - competition - equilibrium - market - models - shared effort games - simulation language: - iso: eng page: 861-868 place: Richland, SC publication: Proceedings of the 2014 International Conference on Autonomous Agents and Multi-agent Systems publication_identifier: isbn: - 978-1-4503-2738-1 publisher: International Foundation for Autonomous Agents and Multiagent Systems series_title: AAMAS '14 status: public title: Nash Equilibria in Shared Effort Games type: conference user_id: '83983' year: '2014' ... --- _id: '17661' author: - first_name: Thomas C. full_name: King, Thomas C. last_name: King - first_name: Qingzhi full_name: Liu, Qingzhi last_name: Liu - first_name: Gleb full_name: Polevoy, Gleb id: '83983' last_name: Polevoy - first_name: Mathijs full_name: de Weerdt, Mathijs last_name: de Weerdt - first_name: Virginia full_name: Dignum, Virginia last_name: Dignum - first_name: M. Birna full_name: van Riemsdijk, M. Birna last_name: van Riemsdijk - first_name: Martijn full_name: Warnier, Martijn last_name: Warnier citation: ama: 'King TC, Liu Q, Polevoy G, et al. Request Driven Social Sensing. In: Proceedings of the 2014 International Conference on Autonomous Agents and Multi-Agent Systems. AAMAS ’14. Richland, SC: International Foundation for Autonomous Agents and Multiagent Systems; 2014:1651-1652.' apa: 'King, T. C., Liu, Q., Polevoy, G., de Weerdt, M., Dignum, V., van Riemsdijk, M. B., & Warnier, M. (2014). Request Driven Social Sensing. In Proceedings of the 2014 International Conference on Autonomous Agents and Multi-agent Systems (pp. 1651–1652). Richland, SC: International Foundation for Autonomous Agents and Multiagent Systems.' bibtex: '@inproceedings{King_Liu_Polevoy_de Weerdt_Dignum_van Riemsdijk_Warnier_2014, place={Richland, SC}, series={AAMAS ’14}, title={Request Driven Social Sensing}, booktitle={Proceedings of the 2014 International Conference on Autonomous Agents and Multi-agent Systems}, publisher={International Foundation for Autonomous Agents and Multiagent Systems}, author={King, Thomas C. and Liu, Qingzhi and Polevoy, Gleb and de Weerdt, Mathijs and Dignum, Virginia and van Riemsdijk, M. Birna and Warnier, Martijn}, year={2014}, pages={1651–1652}, collection={AAMAS ’14} }' chicago: 'King, Thomas C., Qingzhi Liu, Gleb Polevoy, Mathijs de Weerdt, Virginia Dignum, M. Birna van Riemsdijk, and Martijn Warnier. “Request Driven Social Sensing.” In Proceedings of the 2014 International Conference on Autonomous Agents and Multi-Agent Systems, 1651–52. AAMAS ’14. Richland, SC: International Foundation for Autonomous Agents and Multiagent Systems, 2014.' ieee: T. C. King et al., “Request Driven Social Sensing,” in Proceedings of the 2014 International Conference on Autonomous Agents and Multi-agent Systems, 2014, pp. 1651–1652. mla: King, Thomas C., et al. “Request Driven Social Sensing.” Proceedings of the 2014 International Conference on Autonomous Agents and Multi-Agent Systems, International Foundation for Autonomous Agents and Multiagent Systems, 2014, pp. 1651–52. short: 'T.C. King, Q. Liu, G. Polevoy, M. de Weerdt, V. Dignum, M.B. van Riemsdijk, M. Warnier, in: Proceedings of the 2014 International Conference on Autonomous Agents and Multi-Agent Systems, International Foundation for Autonomous Agents and Multiagent Systems, Richland, SC, 2014, pp. 1651–1652.' date_created: 2020-08-06T15:21:45Z date_updated: 2022-01-06T06:53:16Z department: - _id: '63' - _id: '541' extern: '1' keyword: - crowd-sensing - crowdsourcing - data aggregation - game theory - norms - reciprocation - self interested agents - simulation language: - iso: eng page: 1651-1652 place: Richland, SC publication: Proceedings of the 2014 International Conference on Autonomous Agents and Multi-agent Systems publication_identifier: isbn: - 978-1-4503-2738-1 publisher: International Foundation for Autonomous Agents and Multiagent Systems series_title: AAMAS '14 status: public title: Request Driven Social Sensing type: conference user_id: '83983' year: '2014' ... --- _id: '17202' author: - first_name: Anna-Lisa full_name: Vollmer, Anna-Lisa last_name: Vollmer - first_name: Jonathan full_name: Grizou, Jonathan last_name: Grizou - first_name: Manuel full_name: Lopes, Manuel last_name: Lopes - first_name: Katharina full_name: Rohlfing, Katharina id: '50352' last_name: Rohlfing - first_name: Pierre-Yves full_name: Oudeyer, Pierre-Yves last_name: Oudeyer citation: ama: 'Vollmer A-L, Grizou J, Lopes M, Rohlfing K, Oudeyer P-Y. Studying the Co-Construction of Interaction Protocols in Collaborative Tasks with Humans. In: 2014 Joint IEEE International Conference on Development and Learning and on Epigenetic Robotics. IEEE; 2014:208-215.' apa: Vollmer, A.-L., Grizou, J., Lopes, M., Rohlfing, K., & Oudeyer, P.-Y. (2014). Studying the Co-Construction of Interaction Protocols in Collaborative Tasks with Humans. 2014 Joint IEEE International Conference on Development and Learning and on Epigenetic Robotics, 208–215. bibtex: '@inproceedings{Vollmer_Grizou_Lopes_Rohlfing_Oudeyer_2014, title={Studying the Co-Construction of Interaction Protocols in Collaborative Tasks with Humans}, booktitle={2014 Joint IEEE International Conference on Development and Learning and on Epigenetic Robotics}, publisher={IEEE}, author={Vollmer, Anna-Lisa and Grizou, Jonathan and Lopes, Manuel and Rohlfing, Katharina and Oudeyer, Pierre-Yves}, year={2014}, pages={208–215} }' chicago: Vollmer, Anna-Lisa, Jonathan Grizou, Manuel Lopes, Katharina Rohlfing, and Pierre-Yves Oudeyer. “Studying the Co-Construction of Interaction Protocols in Collaborative Tasks with Humans.” In 2014 Joint IEEE International Conference on Development and Learning and on Epigenetic Robotics, 208–15. IEEE, 2014. ieee: A.-L. Vollmer, J. Grizou, M. Lopes, K. Rohlfing, and P.-Y. Oudeyer, “Studying the Co-Construction of Interaction Protocols in Collaborative Tasks with Humans,” in 2014 Joint IEEE International Conference on Development and Learning and on Epigenetic Robotics, 2014, pp. 208–215. mla: Vollmer, Anna-Lisa, et al. “Studying the Co-Construction of Interaction Protocols in Collaborative Tasks with Humans.” 2014 Joint IEEE International Conference on Development and Learning and on Epigenetic Robotics, IEEE, 2014, pp. 208–15. short: 'A.-L. Vollmer, J. Grizou, M. Lopes, K. Rohlfing, P.-Y. Oudeyer, in: 2014 Joint IEEE International Conference on Development and Learning and on Epigenetic Robotics, IEEE, 2014, pp. 208–215.' date_created: 2020-06-24T13:01:21Z date_updated: 2023-02-01T16:11:59Z department: - _id: '749' keyword: - interaction - communication - co-construction - interaction protocols language: - iso: eng page: 208 - 215 publication: 2014 Joint IEEE International Conference on Development and Learning and on Epigenetic Robotics publication_identifier: isbn: - 978-1-4799-7540-2 publisher: IEEE status: public title: Studying the Co-Construction of Interaction Protocols in Collaborative Tasks with Humans type: conference user_id: '14931' year: '2014' ... --- _id: '34442' abstract: - lang: eng text: Radial shaft seals are used in a variety of applications, where rotating shafts in steady housings have to be sealed. Typical examples are crankshafts, camshafts, differential gear or hydraulic pumps. In the operating state the elastomeric seal ring and the shaft are separated by a lubrication film of just a few micrometers. Due to shear strain and fluid friction the contact area is subject to a higher temperature than the rest of the seal ring. The stiffness of the elastomeric material is intensely influenced by this temperature and thus contact pressure, friction and wear also strongly depend on the contact temperature. In order to simulate the contact behavior of elastomer seal rings it is essential to use a comprehensive approach which takes into consideration the interaction of temperature, friction and wear. Based on this idea a macroscopic simulation model has been developed at the MEGT. It combines a finite element approach for the simulation of contact pressure at different wear states, a semi-analytical approach for the calculation of contact temperature and an empirical approach for the calculation of friction. In this paper the model setup is presented, as well as simulation and experimental results. author: - first_name: D. full_name: Frölich, D. last_name: Frölich - first_name: Balázs full_name: Magyar, Balázs id: '97759' last_name: Magyar - first_name: B. full_name: Sauer, B. last_name: Sauer citation: ama: Frölich D, Magyar B, Sauer B. A comprehensive model of wear, friction and contact temperature in radial shaft seals. Wear. 2014;311(1):71-80. doi:https://doi.org/10.1016/j.wear.2013.12.030 apa: Frölich, D., Magyar, B., & Sauer, B. (2014). A comprehensive model of wear, friction and contact temperature in radial shaft seals. Wear, 311(1), 71–80. https://doi.org/10.1016/j.wear.2013.12.030 bibtex: '@article{Frölich_Magyar_Sauer_2014, title={A comprehensive model of wear, friction and contact temperature in radial shaft seals}, volume={311}, DOI={https://doi.org/10.1016/j.wear.2013.12.030}, number={1}, journal={Wear}, author={Frölich, D. and Magyar, Balázs and Sauer, B.}, year={2014}, pages={71–80} }' chicago: 'Frölich, D., Balázs Magyar, and B. Sauer. “A Comprehensive Model of Wear, Friction and Contact Temperature in Radial Shaft Seals.” Wear 311, no. 1 (2014): 71–80. https://doi.org/10.1016/j.wear.2013.12.030.' ieee: 'D. Frölich, B. Magyar, and B. Sauer, “A comprehensive model of wear, friction and contact temperature in radial shaft seals,” Wear, vol. 311, no. 1, pp. 71–80, 2014, doi: https://doi.org/10.1016/j.wear.2013.12.030.' mla: Frölich, D., et al. “A Comprehensive Model of Wear, Friction and Contact Temperature in Radial Shaft Seals.” Wear, vol. 311, no. 1, 2014, pp. 71–80, doi:https://doi.org/10.1016/j.wear.2013.12.030. short: D. Frölich, B. Magyar, B. Sauer, Wear 311 (2014) 71–80. date_created: 2022-12-15T10:19:37Z date_updated: 2026-07-18T13:18:17Z department: - _id: '146' doi: https://doi.org/10.1016/j.wear.2013.12.030 extern: '1' intvolume: ' 311' issue: '1' keyword: - Radial shaft seal ring - Contact temperature - Wear - Friction torque - Finite element simulation language: - iso: eng page: 71-80 publication: Wear publication_identifier: issn: - 0043-1648 quality_controlled: '1' status: public title: A comprehensive model of wear, friction and contact temperature in radial shaft seals type: journal_article user_id: '97759' volume: 311 year: '2014' ... --- _id: '31024' abstract: - lang: ger text: 'Im Zuge der systemweiten Einführung schulischer Inklusion gewinnen Ansätze einer Inklusion unterstützenden Didaktik zunehmend an Bedeutung. Der Beitrag beschreibt zunächst ausgehend vom Inklusionsbegriff die fünf Leitlinien des Bielefelder Ansatzes einer Didaktik für inklusive Lerngruppen: die Akzeptanz aller Schülerinnen und Schüler in ihrer Individualität, der Einsatz förderdiagnostisch fundierter individualisierter Curricula, die Verwirklichung eines adaptiven und binnendifferenzierten Unterrichts, eine besondere Aufmerksamkeit für die Herstellung von Gemeinsamkeit aller Schüler und die didaktische Umsetzung dieser Aspekte im Co-Teaching [...]. Anhand der Ergebnisse einer Interview-Studie mit Experten aus der Praxis wird dieser Ansatz in einem zweiten Schritt auf Praxisrelevanz überprüft und reflektiert.' article_type: original author: - first_name: Annette full_name: Textor, Annette last_name: Textor - first_name: Harry full_name: Kullmann, Harry id: '77972' last_name: Kullmann orcid: 0000-0001-5488-5105 - first_name: Birgit full_name: Lütje-Klose, Birgit last_name: Lütje-Klose citation: ama: Textor A, Kullmann H, Lütje-Klose B. Eine Inklusion unterstützende Didaktik – Rekonstruktionen aus der Perspektive inklusionserfahrener Lehrkräfte. Jahrbuch für Allgemeine Didaktik. 2014;4:69–91. apa: Textor, A., Kullmann, H., & Lütje-Klose, B. (2014). Eine Inklusion unterstützende Didaktik – Rekonstruktionen aus der Perspektive inklusionserfahrener Lehrkräfte. Jahrbuch für Allgemeine Didaktik, 4, 69–91. bibtex: '@article{Textor_Kullmann_Lütje-Klose_2014, title={Eine Inklusion unterstützende Didaktik – Rekonstruktionen aus der Perspektive inklusionserfahrener Lehrkräfte}, volume={4}, journal={Jahrbuch für Allgemeine Didaktik}, author={Textor, Annette and Kullmann, Harry and Lütje-Klose, Birgit}, year={2014}, pages={69–91} }' chicago: 'Textor, Annette, Harry Kullmann, and Birgit Lütje-Klose. “Eine Inklusion unterstützende Didaktik – Rekonstruktionen aus der Perspektive inklusionserfahrener Lehrkräfte.” Jahrbuch für Allgemeine Didaktik 4 (2014): 69–91.' ieee: A. Textor, H. Kullmann, and B. Lütje-Klose, “Eine Inklusion unterstützende Didaktik – Rekonstruktionen aus der Perspektive inklusionserfahrener Lehrkräfte,” Jahrbuch für Allgemeine Didaktik, vol. 4, pp. 69–91, 2014. mla: Textor, Annette, et al. “Eine Inklusion unterstützende Didaktik – Rekonstruktionen aus der Perspektive inklusionserfahrener Lehrkräfte.” Jahrbuch für Allgemeine Didaktik, vol. 4, 2014, pp. 69–91. short: A. Textor, H. Kullmann, B. Lütje-Klose, Jahrbuch für Allgemeine Didaktik 4 (2014) 69–91. date_created: 2022-05-03T06:53:11Z date_updated: 2026-08-22T12:48:24Z department: - _id: '556' intvolume: ' 4' jel: - I24 keyword: - Inklusion - Didaktik - Unterricht - Co-Teaching - Individualisierung - Soziale Integration - Einstellungen language: - iso: ger main_file_link: - open_access: '1' url: https://www.researchgate.net/publication/323454405_Eine_Inklusion_unterstutzende_Didaktik_-_Rekonstruktionen_aus_der_Perspektive_inklusionserfahrener_Lehrkrafte oa: '1' page: 69–91 publication: Jahrbuch für Allgemeine Didaktik publication_status: published quality_controlled: '1' status: public title: Eine Inklusion unterstützende Didaktik – Rekonstruktionen aus der Perspektive inklusionserfahrener Lehrkräfte type: journal_article user_id: '105186' volume: 4 year: '2014' ...