---
_id: '46543'
abstract:
- lang: eng
text: The influence of nanoscale surface topography on protein adsorption
is highly important for numerous applications in medicine and technology. Herein,
ferritin adsorption at flat and nanofaceted, single-crystalline Al2O3 surfaces
is investigated using atomic force microscopy and X-ray photoelectron spectroscopy.
The nanofaceted surfaces are generated by the thermal annealing of Al2O3 wafers
at temperatures above 1000 °C, which leads to the formation of faceted saw-tooth-like
surface topographies with periodicities of about 160 nm and amplitudes of about
15 nm. Ferritin adsorption at these nanofaceted surfaces is notably suppressed
compared to the flat surface at a concentration of 10 mg/mL, which is attributed
to lower adsorption affinities of the newly formed facets. Consequently, adsorption
is restricted mostly to the pattern grooves, where the proteins can maximize their
contact area with the surface. However, this effect depends on the protein concentration,
with an inverse trend being observed at 30 mg/mL. Furthermore, different ferritin
adsorption behavior is observed at topographically similar nanofacet patterns
fabricated at different annealing temperatures and attributed to different step
and kink densities. These results demonstrate that while protein adsorption at
solid surfaces can be notably affected by nanofacet patterns, fine-tuning protein
adsorption in this way requires the precise control of facet properties.
article_number: '12808'
author:
- first_name: Bhanu K.
full_name: Pothineni, Bhanu K.
last_name: Pothineni
- first_name: Sabrina
full_name: Kollmann, Sabrina
last_name: Kollmann
- first_name: Xinyang
full_name: Li, Xinyang
last_name: Li
- first_name: Guido
full_name: Grundmeier, Guido
id: '194'
last_name: Grundmeier
- first_name: Denise J.
full_name: Erb, Denise J.
last_name: Erb
- first_name: Adrian
full_name: Keller, Adrian
id: '48864'
last_name: Keller
orcid: 0000-0001-7139-3110
citation:
ama: Pothineni BK, Kollmann S, Li X, Grundmeier G, Erb DJ, Keller A. Adsorption
of Ferritin at Nanofaceted Al2O3 Surfaces. International Journal of Molecular
Sciences. 2023;24(16). doi:10.3390/ijms241612808
apa: Pothineni, B. K., Kollmann, S., Li, X., Grundmeier, G., Erb, D. J., & Keller,
A. (2023). Adsorption of Ferritin at Nanofaceted Al2O3 Surfaces. International
Journal of Molecular Sciences, 24(16), Article 12808. https://doi.org/10.3390/ijms241612808
bibtex: '@article{Pothineni_Kollmann_Li_Grundmeier_Erb_Keller_2023, title={Adsorption
of Ferritin at Nanofaceted Al2O3 Surfaces}, volume={24}, DOI={10.3390/ijms241612808},
number={1612808}, journal={International Journal of Molecular Sciences}, publisher={MDPI
AG}, author={Pothineni, Bhanu K. and Kollmann, Sabrina and Li, Xinyang and Grundmeier,
Guido and Erb, Denise J. and Keller, Adrian}, year={2023} }'
chicago: Pothineni, Bhanu K., Sabrina Kollmann, Xinyang Li, Guido Grundmeier, Denise
J. Erb, and Adrian Keller. “Adsorption of Ferritin at Nanofaceted Al2O3 Surfaces.”
International Journal of Molecular Sciences 24, no. 16 (2023). https://doi.org/10.3390/ijms241612808.
ieee: 'B. K. Pothineni, S. Kollmann, X. Li, G. Grundmeier, D. J. Erb, and A. Keller,
“Adsorption of Ferritin at Nanofaceted Al2O3 Surfaces,” International Journal
of Molecular Sciences, vol. 24, no. 16, Art. no. 12808, 2023, doi: 10.3390/ijms241612808.'
mla: Pothineni, Bhanu K., et al. “Adsorption of Ferritin at Nanofaceted Al2O3 Surfaces.”
International Journal of Molecular Sciences, vol. 24, no. 16, 12808, MDPI
AG, 2023, doi:10.3390/ijms241612808.
short: B.K. Pothineni, S. Kollmann, X. Li, G. Grundmeier, D.J. Erb, A. Keller, International
Journal of Molecular Sciences 24 (2023).
date_created: 2023-08-16T10:52:25Z
date_updated: 2023-08-16T10:53:00Z
department:
- _id: '302'
doi: 10.3390/ijms241612808
intvolume: ' 24'
issue: '16'
keyword:
- Inorganic Chemistry
- Organic Chemistry
- Physical and Theoretical Chemistry
- Computer Science Applications
- Spectroscopy
- Molecular Biology
- General Medicine
- Catalysis
language:
- iso: eng
publication: International Journal of Molecular Sciences
publication_identifier:
issn:
- 1422-0067
publication_status: published
publisher: MDPI AG
status: public
title: Adsorption of Ferritin at Nanofaceted Al2O3 Surfaces
type: journal_article
user_id: '48864'
volume: 24
year: '2023'
...
---
_id: '44312'
abstract:
- lang: eng
text: "Zusammenfassung\r\n Aufgrund
aktueller Transformationsprozesse kommt der automatisierten und ressourceneffizienten
Fertigung hochfester Leichtbauteile eine steigende Bedeutung zu, beispielsweise
im Flugzeug- und Fahrzeugbau. Für kleine Losgrößen bietet sich hier insbesondere
das Fertigungsverfahren des Drückwalzens an. Der konventionelle, industriell genutzte
Drückwalzprozess stößt allerdings aufgrund der Prozesskomplexität hinsichtlich
der Reproduzierbarkeit an seine Grenzen. Dies wird in der Praxis teilweise durch
personengebundenes Erfahrungswissen kompensiert. Auch ist es nicht möglich, Bauteileigenschaften
definiert einzustellen. Aus diesem Grund bietet der Einsatz einer neuartigen Eigenschaftsregelung
Chancen zur Weiterentwicklung des Fertigungsprozesses und die Möglichkeit zur
Prozessautomatisierung. Hier werden die Werkzeugbahnen abhängig einer Online-Eigenschaftsmessung
über eine zusätzliche Reglerkaskade manipuliert. Die Entwicklung einer solchen
Eigenschaftsregelung erfordert den Einsatz geeigneter, modellbasierter Entwurfsmethoden.
In diesem Beitrag wird daher ein regelungstechnisches Systemmodell für das Drückwalzen
metastabiler austenitischer Edelstähle vorgestellt. Das Simulationsmodell weist
aufgrund seiner Echtzeitfähigkeit neben dem Einsatz als reines Entwurfsmodell
weitere Nutzungsmöglichkeiten z.B. in Beobachtern auf und grenzt sich somit von
domänenspezifischen Simulationstools wie der FEM ab."
author:
- first_name: Lukas
full_name: Kersting, Lukas
last_name: Kersting
- first_name: Bahman
full_name: Arian, Bahman
id: '36287'
last_name: Arian
- first_name: Julian
full_name: Rozo Vasquez, Julian
last_name: Rozo Vasquez
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
- first_name: Werner
full_name: Homberg, Werner
id: '233'
last_name: Homberg
- first_name: Frank
full_name: Walther, Frank
last_name: Walther
citation:
ama: Kersting L, Arian B, Rozo Vasquez J, Trächtler A, Homberg W, Walther F. Echtzeitfähige
Modellierung eines innovativen Drückwalzprozesses für die eigenschaftsgeregelte
Bauteilfertigung. at - Automatisierungstechnik. 2023;71(1):68-81. doi:10.1515/auto-2022-0106
apa: Kersting, L., Arian, B., Rozo Vasquez, J., Trächtler, A., Homberg, W., &
Walther, F. (2023). Echtzeitfähige Modellierung eines innovativen Drückwalzprozesses
für die eigenschaftsgeregelte Bauteilfertigung. At - Automatisierungstechnik,
71(1), 68–81. https://doi.org/10.1515/auto-2022-0106
bibtex: '@article{Kersting_Arian_Rozo Vasquez_Trächtler_Homberg_Walther_2023, title={Echtzeitfähige
Modellierung eines innovativen Drückwalzprozesses für die eigenschaftsgeregelte
Bauteilfertigung}, volume={71}, DOI={10.1515/auto-2022-0106},
number={1}, journal={at - Automatisierungstechnik}, publisher={Walter de Gruyter
GmbH}, author={Kersting, Lukas and Arian, Bahman and Rozo Vasquez, Julian and
Trächtler, Ansgar and Homberg, Werner and Walther, Frank}, year={2023}, pages={68–81}
}'
chicago: 'Kersting, Lukas, Bahman Arian, Julian Rozo Vasquez, Ansgar Trächtler,
Werner Homberg, and Frank Walther. “Echtzeitfähige Modellierung Eines Innovativen
Drückwalzprozesses Für Die Eigenschaftsgeregelte Bauteilfertigung.” At - Automatisierungstechnik
71, no. 1 (2023): 68–81. https://doi.org/10.1515/auto-2022-0106.'
ieee: 'L. Kersting, B. Arian, J. Rozo Vasquez, A. Trächtler, W. Homberg, and F.
Walther, “Echtzeitfähige Modellierung eines innovativen Drückwalzprozesses für
die eigenschaftsgeregelte Bauteilfertigung,” at - Automatisierungstechnik,
vol. 71, no. 1, pp. 68–81, 2023, doi: 10.1515/auto-2022-0106.'
mla: Kersting, Lukas, et al. “Echtzeitfähige Modellierung Eines Innovativen Drückwalzprozesses
Für Die Eigenschaftsgeregelte Bauteilfertigung.” At - Automatisierungstechnik,
vol. 71, no. 1, Walter de Gruyter GmbH, 2023, pp. 68–81, doi:10.1515/auto-2022-0106.
short: L. Kersting, B. Arian, J. Rozo Vasquez, A. Trächtler, W. Homberg, F. Walther,
At - Automatisierungstechnik 71 (2023) 68–81.
date_created: 2023-05-02T09:35:01Z
date_updated: 2023-09-25T10:08:25Z
department:
- _id: '156'
- _id: '241'
- _id: '153'
doi: 10.1515/auto-2022-0106
intvolume: ' 71'
issue: '1'
keyword:
- Electrical and Electronic Engineering
- Computer Science Applications
- Control and Systems Engineering
language:
- iso: eng
page: 68-81
publication: at - Automatisierungstechnik
publication_identifier:
issn:
- 0178-2312
- 2196-677X
publication_status: published
publisher: Walter de Gruyter GmbH
quality_controlled: '1'
status: public
title: Echtzeitfähige Modellierung eines innovativen Drückwalzprozesses für die eigenschaftsgeregelte
Bauteilfertigung
type: journal_article
user_id: '552'
volume: 71
year: '2023'
...
---
_id: '48678'
abstract:
- lang: eng
text: Explanation has been identified as an important capability for AI-based
systems, but research on systematic strategies for achieving understanding in
interaction with such systems is still sparse. Negation is a linguistic strategy
that is often used in explanations. It creates a contrast space between the affirmed
and the negated item that enriches explaining processes with additional contextual
information. While negation in human speech has been shown to lead to higher processing
costs and worse task performance in terms of recall or action execution when used
in isolation, it can decrease processing costs when used in context. So far, it
has not been considered as a guiding strategy for explanations in human-robot
interaction. We conducted an empirical study to investigate the use of negation
as a guiding strategy in explanatory human-robot dialogue, in which a virtual
robot explains tasks and possible actions to a human explainee to solve them in
terms of gestures on a touchscreen. Our results show that negation vs. affirmation
1) increases processing costs measured as reaction time and 2) increases several
aspects of task performance. While there was no significant effect of negation
on the number of initially correctly executed gestures, we found a significantly
lower number of attempts—measured as breaks in the finger movement data before
the correct gesture was carried out—when being instructed through a negation.
We further found that the gestures significantly resembled the presented prototype
gesture more following an instruction with a negation as opposed to an affirmation.
Also, the participants rated the benefit of contrastive vs. affirmative explanations
significantly higher. Repeating the instructions decreased the effects of negation,
yielding similar processing costs and task performance measures for negation and
affirmation after several iterations. We discuss our results with respect to possible
effects of negation on linguistic processing of explanations and limitations of
our study.
author:
- first_name: André
full_name: Groß, André
last_name: Groß
- first_name: Amit
full_name: Singh, Amit
last_name: Singh
- first_name: Ngoc Chi
full_name: Banh, Ngoc Chi
last_name: Banh
- first_name: Birte
full_name: Richter, Birte
last_name: Richter
- first_name: Ingrid
full_name: Scharlau, Ingrid
last_name: Scharlau
- first_name: Katharina J.
full_name: Rohlfing, Katharina J.
last_name: Rohlfing
- first_name: Britta
full_name: Wrede, Britta
last_name: Wrede
citation:
ama: Groß A, Singh A, Banh NC, et al. Scaffolding the human partner by contrastive
guidance in an explanatory human-robot dialogue. Frontiers in Robotics and
AI. 2023;10. doi:10.3389/frobt.2023.1236184
apa: Groß, A., Singh, A., Banh, N. C., Richter, B., Scharlau, I., Rohlfing, K. J.,
& Wrede, B. (2023). Scaffolding the human partner by contrastive guidance
in an explanatory human-robot dialogue. Frontiers in Robotics and AI, 10.
https://doi.org/10.3389/frobt.2023.1236184
bibtex: '@article{Groß_Singh_Banh_Richter_Scharlau_Rohlfing_Wrede_2023, title={Scaffolding
the human partner by contrastive guidance in an explanatory human-robot dialogue},
volume={10}, DOI={10.3389/frobt.2023.1236184},
journal={Frontiers in Robotics and AI}, publisher={Frontiers Media SA}, author={Groß,
André and Singh, Amit and Banh, Ngoc Chi and Richter, Birte and Scharlau, Ingrid
and Rohlfing, Katharina J. and Wrede, Britta}, year={2023} }'
chicago: Groß, André, Amit Singh, Ngoc Chi Banh, Birte Richter, Ingrid Scharlau,
Katharina J. Rohlfing, and Britta Wrede. “Scaffolding the Human Partner by Contrastive
Guidance in an Explanatory Human-Robot Dialogue.” Frontiers in Robotics and
AI 10 (2023). https://doi.org/10.3389/frobt.2023.1236184.
ieee: 'A. Groß et al., “Scaffolding the human partner by contrastive guidance
in an explanatory human-robot dialogue,” Frontiers in Robotics and AI,
vol. 10, 2023, doi: 10.3389/frobt.2023.1236184.'
mla: Groß, André, et al. “Scaffolding the Human Partner by Contrastive Guidance
in an Explanatory Human-Robot Dialogue.” Frontiers in Robotics and AI,
vol. 10, Frontiers Media SA, 2023, doi:10.3389/frobt.2023.1236184.
short: A. Groß, A. Singh, N.C. Banh, B. Richter, I. Scharlau, K.J. Rohlfing, B.
Wrede, Frontiers in Robotics and AI 10 (2023).
date_created: 2023-11-08T06:40:41Z
date_updated: 2025-09-11T10:32:44Z
doi: 10.3389/frobt.2023.1236184
intvolume: ' 10'
keyword:
- Artificial Intelligence
- Computer Science Applications
publication: Frontiers in Robotics and AI
publication_identifier:
issn:
- 2296-9144
publication_status: published
publisher: Frontiers Media SA
status: public
title: Scaffolding the human partner by contrastive guidance in an explanatory human-robot
dialogue
type: journal_article
user_id: '93405'
volume: 10
year: '2023'
...
---
_id: '47151'
abstract:
- lang: eng
text: When it comes to mastering the digital world, the education system
is more and more facing the task of making students competent and self-determined
agents when interacting with digital artefacts. This task often falls to computing
education. In the traditional fields of computing education, a plethora of models,
guidelines, and principles exist, which help scholars and teachers identify what
the relevant aspects are and which of them one should cover in the classroom.
When it comes to explaining the world of digital artefacts, however, there is
hardly any such guiding model. The ARIadne model introduced in this paper provides
a means of explanation and exploration of digital artefacts which help teachers
and students to do a subject analysis of digital artefacts by scrutinizing them
from several perspectives. Instead of artificially separating aspects which target
the same phenomena within different areas of education (like computing, ICT or
media education), the model integrates technological aspects of digital artefacts
and the relevant societal discourses of their usage, their impacts and the reasons
behind their development into a coherent explanation model.
author:
- first_name: Felix
full_name: Winkelnkemper, Felix
id: '3117'
last_name: Winkelnkemper
- first_name: Lukas
full_name: Höper, Lukas
id: '58041'
last_name: Höper
- first_name: Carsten
full_name: Schulte, Carsten
id: '60311'
last_name: Schulte
citation:
ama: Winkelnkemper F, Höper L, Schulte C. ARIadne – An Explanation Model for Digital
Artefacts. Informatics in Education. Published online 2023. doi:10.15388/infedu.2024.09
apa: Winkelnkemper, F., Höper, L., & Schulte, C. (2023). ARIadne – An Explanation
Model for Digital Artefacts. Informatics in Education. https://doi.org/10.15388/infedu.2024.09
bibtex: '@article{Winkelnkemper_Höper_Schulte_2023, title={ARIadne – An Explanation
Model for Digital Artefacts}, DOI={10.15388/infedu.2024.09},
journal={Informatics in Education}, publisher={Vilnius University Press}, author={Winkelnkemper,
Felix and Höper, Lukas and Schulte, Carsten}, year={2023} }'
chicago: Winkelnkemper, Felix, Lukas Höper, and Carsten Schulte. “ARIadne – An Explanation
Model for Digital Artefacts.” Informatics in Education, 2023. https://doi.org/10.15388/infedu.2024.09.
ieee: 'F. Winkelnkemper, L. Höper, and C. Schulte, “ARIadne – An Explanation Model
for Digital Artefacts,” Informatics in Education, 2023, doi: 10.15388/infedu.2024.09.'
mla: Winkelnkemper, Felix, et al. “ARIadne – An Explanation Model for Digital Artefacts.”
Informatics in Education, Vilnius University Press, 2023, doi:10.15388/infedu.2024.09.
short: F. Winkelnkemper, L. Höper, C. Schulte, Informatics in Education (2023).
date_created: 2023-09-21T11:24:41Z
date_updated: 2024-11-19T07:26:12Z
ddc:
- '000'
- '370'
department:
- _id: '67'
doi: 10.15388/infedu.2024.09
file:
- access_level: closed
content_type: application/pdf
creator: hoeper
date_created: 2024-11-19T07:25:56Z
date_updated: 2024-11-19T07:25:56Z
file_id: '57215'
file_name: infedu.2024.15.pdf
file_size: 1034363
relation: main_file
success: 1
file_date_updated: 2024-11-19T07:25:56Z
has_accepted_license: '1'
keyword:
- Computer Science Applications
- Communication
- Education
- General Engineering
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://infedu.vu.lt/journal/INFEDU/article/772/info
oa: '1'
publication: Informatics in Education
publication_identifier:
issn:
- 1648-5831
- 2335-8971
publication_status: published
publisher: Vilnius University Press
quality_controlled: '1'
status: public
title: ARIadne – An Explanation Model for Digital Artefacts
type: journal_article
user_id: '58041'
year: '2023'
...
---
_id: '48689'
article_number: '2'
author:
- first_name: Constanze
full_name: Niederhaus, Constanze
last_name: Niederhaus
- first_name: Matthias
full_name: Prikoszovits, Matthias
last_name: Prikoszovits
citation:
ama: 'Niederhaus C, Prikoszovits M. DaF und DaZ im Kontext Deutsch für den Beruf:
Schnittstellen und Divergenzen. Deutsch als Fremdsprache. 2023;(2). doi:10.37307/j.2198-2430.2023.02.02'
apa: 'Niederhaus, C., & Prikoszovits, M. (2023). DaF und DaZ im Kontext Deutsch
für den Beruf: Schnittstellen und Divergenzen. Deutsch als Fremdsprache,
2, Article 2. https://doi.org/10.37307/j.2198-2430.2023.02.02'
bibtex: '@article{Niederhaus_Prikoszovits_2023, title={DaF und DaZ im Kontext Deutsch
für den Beruf: Schnittstellen und Divergenzen}, DOI={10.37307/j.2198-2430.2023.02.02},
number={22}, journal={Deutsch als Fremdsprache}, publisher={Erich Schmidt Verlag
GmbH & Co. KG}, author={Niederhaus, Constanze and Prikoszovits, Matthias},
year={2023} }'
chicago: 'Niederhaus, Constanze, and Matthias Prikoszovits. “DaF und DaZ im Kontext
Deutsch für den Beruf: Schnittstellen und Divergenzen.” Deutsch als Fremdsprache,
no. 2 (2023). https://doi.org/10.37307/j.2198-2430.2023.02.02.'
ieee: 'C. Niederhaus and M. Prikoszovits, “DaF und DaZ im Kontext Deutsch für den
Beruf: Schnittstellen und Divergenzen,” Deutsch als Fremdsprache, no. 2,
Art. no. 2, 2023, doi: 10.37307/j.2198-2430.2023.02.02.'
mla: 'Niederhaus, Constanze, and Matthias Prikoszovits. “DaF und DaZ im Kontext
Deutsch für den Beruf: Schnittstellen und Divergenzen.” Deutsch als Fremdsprache,
no. 2, 2, Erich Schmidt Verlag GmbH & Co. KG, 2023, doi:10.37307/j.2198-2430.2023.02.02.'
short: C. Niederhaus, M. Prikoszovits, Deutsch als Fremdsprache (2023).
date_created: 2023-11-08T14:08:52Z
date_updated: 2024-12-21T15:39:30Z
doi: 10.37307/j.2198-2430.2023.02.02
issue: '2'
keyword:
- Computer Science Applications
- History
- Education
language:
- iso: ger
publication: Deutsch als Fremdsprache
publication_identifier:
issn:
- 2198-2430
publication_status: published
publisher: Erich Schmidt Verlag GmbH & Co. KG
status: public
title: 'DaF und DaZ im Kontext Deutsch für den Beruf: Schnittstellen und Divergenzen'
type: journal_article
user_id: '54999'
year: '2023'
...
---
_id: '29843'
article_number: '104877'
author:
- first_name: Jannik
full_name: Castenow, Jannik
id: '38705'
last_name: Castenow
- first_name: Peter
full_name: Kling, Peter
last_name: Kling
- first_name: Till
full_name: Knollmann, Till
id: '39241'
last_name: Knollmann
orcid: 0000-0003-2014-4696
- first_name: Friedhelm
full_name: Meyer auf der Heide, Friedhelm
id: '15523'
last_name: Meyer auf der Heide
citation:
ama: Castenow J, Kling P, Knollmann T, Meyer auf der Heide F. A Discrete and Continuous
Study of the Max-Chain-Formation Problem. Information and Computation.
Published online 2022. doi:10.1016/j.ic.2022.104877
apa: Castenow, J., Kling, P., Knollmann, T., & Meyer auf der Heide, F. (2022).
A Discrete and Continuous Study of the Max-Chain-Formation Problem. Information
and Computation, Article 104877. https://doi.org/10.1016/j.ic.2022.104877
bibtex: '@article{Castenow_Kling_Knollmann_Meyer auf der Heide_2022, title={A Discrete
and Continuous Study of the Max-Chain-Formation Problem}, DOI={10.1016/j.ic.2022.104877},
number={104877}, journal={Information and Computation}, publisher={Elsevier BV},
author={Castenow, Jannik and Kling, Peter and Knollmann, Till and Meyer auf der
Heide, Friedhelm}, year={2022} }'
chicago: Castenow, Jannik, Peter Kling, Till Knollmann, and Friedhelm Meyer auf
der Heide. “A Discrete and Continuous Study of the Max-Chain-Formation Problem.”
Information and Computation, 2022. https://doi.org/10.1016/j.ic.2022.104877.
ieee: 'J. Castenow, P. Kling, T. Knollmann, and F. Meyer auf der Heide, “A Discrete
and Continuous Study of the Max-Chain-Formation Problem,” Information and Computation,
Art. no. 104877, 2022, doi: 10.1016/j.ic.2022.104877.'
mla: Castenow, Jannik, et al. “A Discrete and Continuous Study of the Max-Chain-Formation
Problem.” Information and Computation, 104877, Elsevier BV, 2022, doi:10.1016/j.ic.2022.104877.
short: J. Castenow, P. Kling, T. Knollmann, F. Meyer auf der Heide, Information
and Computation (2022).
date_created: 2022-02-15T07:38:28Z
date_updated: 2022-02-15T07:41:00Z
department:
- _id: '63'
doi: 10.1016/j.ic.2022.104877
keyword:
- Computational Theory and Mathematics
- Computer Science Applications
- Information Systems
- Theoretical Computer Science
language:
- iso: eng
project:
- _id: '106'
name: 'Algorithmen für Schwarmrobotik: Verteiltes Rechnen trifft Dynamische Systeme'
publication: Information and Computation
publication_identifier:
issn:
- 0890-5401
publication_status: published
publisher: Elsevier BV
status: public
title: A Discrete and Continuous Study of the Max-Chain-Formation Problem
type: journal_article
user_id: '38705'
year: '2022'
...
---
_id: '30209'
abstract:
- lang: eng
text: DNA origami technology enables the folding of DNA strands into complex
nanoscale shapes whose properties and interactions with molecular species often
deviate significantly from that of genomic DNA. Here, we investigate the salting-out
of different DNA origami shapes by the kosmotropic salt ammonium sulfate that
is routinely employed in protein precipitation. We find that centrifugation in
the presence of 3 M ammonium sulfate results in notable precipitation of DNA origami
nanostructures but not of double-stranded genomic DNA. The precipitated DNA origami
nanostructures can be resuspended in ammonium sulfate-free buffer without apparent
formation of aggregates or loss of structural integrity. Even though quasi-1D
six-helix bundle DNA origami are slightly less susceptible toward salting-out
than more compact DNA origami triangles and 24-helix bundles, precipitation and
recovery yields appear to be mostly independent of DNA origami shape and superstructure.
Exploiting the specificity of ammonium sulfate salting-out for DNA origami nanostructures,
we further apply this method to separate DNA origami triangles from genomic DNA
fragments in a complex mixture. Our results thus demonstrate the possibility of
concentrating and purifying DNA origami nanostructures by ammonium sulfate-induced
salting-out.
author:
- first_name: Marcel
full_name: Hanke, Marcel
last_name: Hanke
- first_name: Niklas
full_name: Hansen, Niklas
last_name: Hansen
- first_name: Ruiping
full_name: Chen, Ruiping
last_name: Chen
- first_name: Guido
full_name: Grundmeier, Guido
last_name: Grundmeier
- first_name: Karim
full_name: Fahmy, Karim
last_name: Fahmy
- first_name: Adrian
full_name: Keller, Adrian
last_name: Keller
citation:
ama: Hanke M, Hansen N, Chen R, Grundmeier G, Fahmy K, Keller A. Salting-Out of
DNA Origami Nanostructures by Ammonium Sulfate. International Journal of Molecular
Sciences. 2022;23(5):2817. doi:10.3390/ijms23052817
apa: Hanke, M., Hansen, N., Chen, R., Grundmeier, G., Fahmy, K., & Keller, A.
(2022). Salting-Out of DNA Origami Nanostructures by Ammonium Sulfate. International
Journal of Molecular Sciences, 23(5), 2817. https://doi.org/10.3390/ijms23052817
bibtex: '@article{Hanke_Hansen_Chen_Grundmeier_Fahmy_Keller_2022, title={Salting-Out
of DNA Origami Nanostructures by Ammonium Sulfate}, volume={23}, DOI={10.3390/ijms23052817},
number={5}, journal={International Journal of Molecular Sciences}, publisher={MDPI
AG}, author={Hanke, Marcel and Hansen, Niklas and Chen, Ruiping and Grundmeier,
Guido and Fahmy, Karim and Keller, Adrian}, year={2022}, pages={2817} }'
chicago: 'Hanke, Marcel, Niklas Hansen, Ruiping Chen, Guido Grundmeier, Karim Fahmy,
and Adrian Keller. “Salting-Out of DNA Origami Nanostructures by Ammonium Sulfate.”
International Journal of Molecular Sciences 23, no. 5 (2022): 2817. https://doi.org/10.3390/ijms23052817.'
ieee: 'M. Hanke, N. Hansen, R. Chen, G. Grundmeier, K. Fahmy, and A. Keller, “Salting-Out
of DNA Origami Nanostructures by Ammonium Sulfate,” International Journal of
Molecular Sciences, vol. 23, no. 5, p. 2817, 2022, doi: 10.3390/ijms23052817.'
mla: Hanke, Marcel, et al. “Salting-Out of DNA Origami Nanostructures by Ammonium
Sulfate.” International Journal of Molecular Sciences, vol. 23, no. 5,
MDPI AG, 2022, p. 2817, doi:10.3390/ijms23052817.
short: M. Hanke, N. Hansen, R. Chen, G. Grundmeier, K. Fahmy, A. Keller, International
Journal of Molecular Sciences 23 (2022) 2817.
date_created: 2022-03-07T07:28:02Z
date_updated: 2022-03-07T07:29:27Z
department:
- _id: '302'
doi: 10.3390/ijms23052817
intvolume: ' 23'
issue: '5'
keyword:
- Inorganic Chemistry
- Organic Chemistry
- Physical and Theoretical Chemistry
- Computer Science Applications
- Spectroscopy
- Molecular Biology
- General Medicine
- Catalysis
language:
- iso: eng
page: '2817'
publication: International Journal of Molecular Sciences
publication_identifier:
issn:
- 1422-0067
publication_status: published
publisher: MDPI AG
status: public
title: Salting-Out of DNA Origami Nanostructures by Ammonium Sulfate
type: journal_article
user_id: '48864'
volume: 23
year: '2022'
...
---
_id: '32266'
author:
- first_name: Julia Amelie
full_name: Hoppe, Julia Amelie
last_name: Hoppe
- first_name: Helinä
full_name: Melkas, Helinä
last_name: Melkas
- first_name: Satu
full_name: Pekkarinen, Satu
last_name: Pekkarinen
- first_name: Outi
full_name: Tuisku, Outi
last_name: Tuisku
- first_name: Lea
full_name: Hennala, Lea
last_name: Hennala
- first_name: Rose-Marie
full_name: Johansson-Pajala, Rose-Marie
last_name: Johansson-Pajala
- first_name: Christine
full_name: Gustafsson, Christine
last_name: Gustafsson
- first_name: Kirsten
full_name: Thommes, Kirsten
last_name: Thommes
citation:
ama: Hoppe JA, Melkas H, Pekkarinen S, et al. Perception of Society’s Trust in Care
Robots by Public Opinion Leaders. International Journal of Human–Computer Interaction.
Published online 2022:1-17. doi:10.1080/10447318.2022.2081283
apa: Hoppe, J. A., Melkas, H., Pekkarinen, S., Tuisku, O., Hennala, L., Johansson-Pajala,
R.-M., Gustafsson, C., & Thommes, K. (2022). Perception of Society’s Trust
in Care Robots by Public Opinion Leaders. International Journal of Human–Computer
Interaction, 1–17. https://doi.org/10.1080/10447318.2022.2081283
bibtex: '@article{Hoppe_Melkas_Pekkarinen_Tuisku_Hennala_Johansson-Pajala_Gustafsson_Thommes_2022,
title={Perception of Society’s Trust in Care Robots by Public Opinion Leaders},
DOI={10.1080/10447318.2022.2081283},
journal={International Journal of Human–Computer Interaction}, publisher={Informa
UK Limited}, author={Hoppe, Julia Amelie and Melkas, Helinä and Pekkarinen, Satu
and Tuisku, Outi and Hennala, Lea and Johansson-Pajala, Rose-Marie and Gustafsson,
Christine and Thommes, Kirsten}, year={2022}, pages={1–17} }'
chicago: Hoppe, Julia Amelie, Helinä Melkas, Satu Pekkarinen, Outi Tuisku, Lea Hennala,
Rose-Marie Johansson-Pajala, Christine Gustafsson, and Kirsten Thommes. “Perception
of Society’s Trust in Care Robots by Public Opinion Leaders.” International
Journal of Human–Computer Interaction, 2022, 1–17. https://doi.org/10.1080/10447318.2022.2081283.
ieee: 'J. A. Hoppe et al., “Perception of Society’s Trust in Care Robots
by Public Opinion Leaders,” International Journal of Human–Computer Interaction,
pp. 1–17, 2022, doi: 10.1080/10447318.2022.2081283.'
mla: Hoppe, Julia Amelie, et al. “Perception of Society’s Trust in Care Robots by
Public Opinion Leaders.” International Journal of Human–Computer Interaction,
Informa UK Limited, 2022, pp. 1–17, doi:10.1080/10447318.2022.2081283.
short: J.A. Hoppe, H. Melkas, S. Pekkarinen, O. Tuisku, L. Hennala, R.-M. Johansson-Pajala,
C. Gustafsson, K. Thommes, International Journal of Human–Computer Interaction
(2022) 1–17.
date_created: 2022-06-28T13:13:41Z
date_updated: 2022-06-28T13:13:56Z
department:
- _id: '178'
- _id: '184'
doi: 10.1080/10447318.2022.2081283
keyword:
- Computer Science Applications
- Human-Computer Interaction
- Human Factors and Ergonomics
language:
- iso: eng
page: 1-17
publication: International Journal of Human–Computer Interaction
publication_identifier:
issn:
- 1044-7318
- 1532-7590
publication_status: published
publisher: Informa UK Limited
status: public
title: Perception of Society’s Trust in Care Robots by Public Opinion Leaders
type: journal_article
user_id: '72497'
year: '2022'
...
---
_id: '32267'
author:
- first_name: Julia Amelie
full_name: Hoppe, Julia Amelie
last_name: Hoppe
- first_name: Helinä
full_name: Melkas, Helinä
last_name: Melkas
- first_name: Satu
full_name: Pekkarinen, Satu
last_name: Pekkarinen
- first_name: Outi
full_name: Tuisku, Outi
last_name: Tuisku
- first_name: Lea
full_name: Hennala, Lea
last_name: Hennala
- first_name: Rose-Marie
full_name: Johansson-Pajala, Rose-Marie
last_name: Johansson-Pajala
- first_name: Christine
full_name: Gustafsson, Christine
last_name: Gustafsson
- first_name: Kirsten
full_name: Thommes, Kirsten
last_name: Thommes
citation:
ama: Hoppe JA, Melkas H, Pekkarinen S, et al. Perception of Society’s Trust in Care
Robots by Public Opinion Leaders. International Journal of Human–Computer Interaction.
Published online 2022:1-17. doi:10.1080/10447318.2022.2081283
apa: Hoppe, J. A., Melkas, H., Pekkarinen, S., Tuisku, O., Hennala, L., Johansson-Pajala,
R.-M., Gustafsson, C., & Thommes, K. (2022). Perception of Society’s Trust
in Care Robots by Public Opinion Leaders. International Journal of Human–Computer
Interaction, 1–17. https://doi.org/10.1080/10447318.2022.2081283
bibtex: '@article{Hoppe_Melkas_Pekkarinen_Tuisku_Hennala_Johansson-Pajala_Gustafsson_Thommes_2022,
title={Perception of Society’s Trust in Care Robots by Public Opinion Leaders},
DOI={10.1080/10447318.2022.2081283},
journal={International Journal of Human–Computer Interaction}, publisher={Informa
UK Limited}, author={Hoppe, Julia Amelie and Melkas, Helinä and Pekkarinen, Satu
and Tuisku, Outi and Hennala, Lea and Johansson-Pajala, Rose-Marie and Gustafsson,
Christine and Thommes, Kirsten}, year={2022}, pages={1–17} }'
chicago: Hoppe, Julia Amelie, Helinä Melkas, Satu Pekkarinen, Outi Tuisku, Lea Hennala,
Rose-Marie Johansson-Pajala, Christine Gustafsson, and Kirsten Thommes. “Perception
of Society’s Trust in Care Robots by Public Opinion Leaders.” International
Journal of Human–Computer Interaction, 2022, 1–17. https://doi.org/10.1080/10447318.2022.2081283.
ieee: 'J. A. Hoppe et al., “Perception of Society’s Trust in Care Robots
by Public Opinion Leaders,” International Journal of Human–Computer Interaction,
pp. 1–17, 2022, doi: 10.1080/10447318.2022.2081283.'
mla: Hoppe, Julia Amelie, et al. “Perception of Society’s Trust in Care Robots by
Public Opinion Leaders.” International Journal of Human–Computer Interaction,
Informa UK Limited, 2022, pp. 1–17, doi:10.1080/10447318.2022.2081283.
short: J.A. Hoppe, H. Melkas, S. Pekkarinen, O. Tuisku, L. Hennala, R.-M. Johansson-Pajala,
C. Gustafsson, K. Thommes, International Journal of Human–Computer Interaction
(2022) 1–17.
date_created: 2022-06-28T13:14:46Z
date_updated: 2022-06-28T13:14:54Z
department:
- _id: '178'
- _id: '184'
doi: 10.1080/10447318.2022.2081283
keyword:
- Computer Science Applications
- Human-Computer Interaction
- Human Factors and Ergonomics
language:
- iso: eng
page: 1-17
publication: International Journal of Human–Computer Interaction
publication_identifier:
issn:
- 1044-7318
- 1532-7590
publication_status: published
publisher: Informa UK Limited
status: public
title: Perception of Society’s Trust in Care Robots by Public Opinion Leaders
type: journal_article
user_id: '72497'
year: '2022'
...
---
_id: '32589'
abstract:
- lang: eng
text: Guanidinium (Gdm) undergoes interactions with both hydrophilic and
hydrophobic groups and, thus, is a highly potent denaturant of biomolecular structure.
However, our molecular understanding of the interaction of Gdm with proteins and
DNA is still rather limited. Here, we investigated the denaturation of DNA origami
nanostructures by three Gdm salts, i.e., guanidinium chloride (GdmCl), guanidinium
sulfate (Gdm2SO4), and guanidinium thiocyanate (GdmSCN), at different temperatures
and in dependence of incubation time. Using DNA origami nanostructures as sensors
that translate small molecular transitions into nanostructural changes, the denaturing
effects of the Gdm salts were directly visualized by atomic force microscopy.
GdmSCN was the most potent DNA denaturant, which caused complete DNA origami denaturation
at 50 °C already at a concentration of 2 M. Under such harsh conditions, denaturation
occurred within the first 15 min of Gdm exposure, whereas much slower kinetics
were observed for the more weakly denaturing salt Gdm2SO4 at 25 °C. Lastly, we
observed a novel non-monotonous temperature dependence of DNA origami denaturation
in Gdm2SO4 with the fraction of intact nanostructures having an intermediate minimum
at about 40 °C. Our results, thus, provide further insights into the highly complex
Gdm–DNA interaction and underscore the importance of the counteranion species.
author:
- first_name: Marcel
full_name: Hanke, Marcel
last_name: Hanke
- first_name: Niklas
full_name: Hansen, Niklas
last_name: Hansen
- first_name: Emilia
full_name: Tomm, Emilia
last_name: Tomm
- first_name: Guido
full_name: Grundmeier, Guido
id: '194'
last_name: Grundmeier
- first_name: Adrian
full_name: Keller, Adrian
id: '48864'
last_name: Keller
orcid: 0000-0001-7139-3110
citation:
ama: Hanke M, Hansen N, Tomm E, Grundmeier G, Keller A. Time-Dependent DNA Origami
Denaturation by Guanidinium Chloride, Guanidinium Sulfate, and Guanidinium Thiocyanate.
International Journal of Molecular Sciences. 2022;23(15):8547. doi:10.3390/ijms23158547
apa: Hanke, M., Hansen, N., Tomm, E., Grundmeier, G., & Keller, A. (2022). Time-Dependent
DNA Origami Denaturation by Guanidinium Chloride, Guanidinium Sulfate, and Guanidinium
Thiocyanate. International Journal of Molecular Sciences, 23(15),
8547. https://doi.org/10.3390/ijms23158547
bibtex: '@article{Hanke_Hansen_Tomm_Grundmeier_Keller_2022, title={Time-Dependent
DNA Origami Denaturation by Guanidinium Chloride, Guanidinium Sulfate, and Guanidinium
Thiocyanate}, volume={23}, DOI={10.3390/ijms23158547},
number={15}, journal={International Journal of Molecular Sciences}, publisher={MDPI
AG}, author={Hanke, Marcel and Hansen, Niklas and Tomm, Emilia and Grundmeier,
Guido and Keller, Adrian}, year={2022}, pages={8547} }'
chicago: 'Hanke, Marcel, Niklas Hansen, Emilia Tomm, Guido Grundmeier, and Adrian
Keller. “Time-Dependent DNA Origami Denaturation by Guanidinium Chloride, Guanidinium
Sulfate, and Guanidinium Thiocyanate.” International Journal of Molecular Sciences
23, no. 15 (2022): 8547. https://doi.org/10.3390/ijms23158547.'
ieee: 'M. Hanke, N. Hansen, E. Tomm, G. Grundmeier, and A. Keller, “Time-Dependent
DNA Origami Denaturation by Guanidinium Chloride, Guanidinium Sulfate, and Guanidinium
Thiocyanate,” International Journal of Molecular Sciences, vol. 23, no.
15, p. 8547, 2022, doi: 10.3390/ijms23158547.'
mla: Hanke, Marcel, et al. “Time-Dependent DNA Origami Denaturation by Guanidinium
Chloride, Guanidinium Sulfate, and Guanidinium Thiocyanate.” International
Journal of Molecular Sciences, vol. 23, no. 15, MDPI AG, 2022, p. 8547, doi:10.3390/ijms23158547.
short: M. Hanke, N. Hansen, E. Tomm, G. Grundmeier, A. Keller, International Journal
of Molecular Sciences 23 (2022) 8547.
date_created: 2022-08-08T06:39:20Z
date_updated: 2022-08-08T06:40:14Z
department:
- _id: '302'
doi: 10.3390/ijms23158547
intvolume: ' 23'
issue: '15'
keyword:
- Inorganic Chemistry
- Organic Chemistry
- Physical and Theoretical Chemistry
- Computer Science Applications
- Spectroscopy
- Molecular Biology
- General Medicine
- Catalysis
language:
- iso: eng
page: '8547'
publication: International Journal of Molecular Sciences
publication_identifier:
issn:
- 1422-0067
publication_status: published
publisher: MDPI AG
status: public
title: Time-Dependent DNA Origami Denaturation by Guanidinium Chloride, Guanidinium
Sulfate, and Guanidinium Thiocyanate
type: journal_article
user_id: '48864'
volume: 23
year: '2022'
...
---
_id: '34223'
abstract:
- lang: eng
text: In this study, quasi-unidirectional continuous fiber reinforced thermoplastics
(CFRTs) are joined with metal sheets via cold formed cylindrical, elliptical and
polygonal pin structures which are directly pressed into the CFRT component after
local infrared heating. In comparison to already available studies, the unique
novelty is the use of non-rotational symmetric pin structures for the CFRT/metal
hybrid joining. Thus, a variation in the fiber orientation in the CFRT component
as well as a variation in the non-rotational symmetric pins’ orientation in relation
to the sample orientation is conducted. The created samples are consequently mechanically
tested via single lap shear experiments in a quasi-static state. Finally, the
failure behavior of the single lap shear samples is investigated with the help
of microscopic images and detailed photographs. In the single lap shear tests,
it could be shown that non-rotational symmetric pin structures lead to an increase
in maximum testing forces of up to 74% when compared to cylindrical pins. However,
when normalized to the pin foot print related joint strength, only one polygonal
pin variation showed increased joint strength in comparison to cylindrical pin
structures. The investigation of the failure behavior showed two distinct failure
modes. The first failure mode was failure of the CFRT component due to an exceedance
of the maximum bearing strength of the pin-hole leading to significant damage
in the CFRT component. The second failure mode was pin-deflection due to the applied
testing load and a subsequent pin extraction from the CFRT component resulting
in significantly less visible damage in the CFRT component. Generally, CFRT failure
is more likely with a fiber orientation of 0° in relation to the load direction
while pin extraction typically occurs with a fiber orientation of 90°. It is assumed
that for future investigations, pin structures with an undercutting shape that
creates an interlocking joint could counteract the tendency for pin-extraction
and consequently lead to increased maximum joint strengths.
article_number: '4962'
author:
- first_name: Julian
full_name: Popp, Julian
last_name: Popp
- first_name: David
full_name: Römisch, David
last_name: Römisch
- first_name: Marion
full_name: Merklein, Marion
last_name: Merklein
- first_name: Dietmar
full_name: Drummer, Dietmar
last_name: Drummer
citation:
ama: Popp J, Römisch D, Merklein M, Drummer D. Joining of CFRT/Steel Hybrid Parts
via Direct Pressing of Cold Formed Non-Rotational Symmetric Pin Structures. Applied
Sciences. 2022;12(10). doi:10.3390/app12104962
apa: Popp, J., Römisch, D., Merklein, M., & Drummer, D. (2022). Joining of CFRT/Steel
Hybrid Parts via Direct Pressing of Cold Formed Non-Rotational Symmetric Pin Structures.
Applied Sciences, 12(10), Article 4962. https://doi.org/10.3390/app12104962
bibtex: '@article{Popp_Römisch_Merklein_Drummer_2022, title={Joining of CFRT/Steel
Hybrid Parts via Direct Pressing of Cold Formed Non-Rotational Symmetric Pin Structures},
volume={12}, DOI={10.3390/app12104962},
number={104962}, journal={Applied Sciences}, publisher={MDPI AG}, author={Popp,
Julian and Römisch, David and Merklein, Marion and Drummer, Dietmar}, year={2022}
}'
chicago: Popp, Julian, David Römisch, Marion Merklein, and Dietmar Drummer. “Joining
of CFRT/Steel Hybrid Parts via Direct Pressing of Cold Formed Non-Rotational Symmetric
Pin Structures.” Applied Sciences 12, no. 10 (2022). https://doi.org/10.3390/app12104962.
ieee: 'J. Popp, D. Römisch, M. Merklein, and D. Drummer, “Joining of CFRT/Steel
Hybrid Parts via Direct Pressing of Cold Formed Non-Rotational Symmetric Pin Structures,”
Applied Sciences, vol. 12, no. 10, Art. no. 4962, 2022, doi: 10.3390/app12104962.'
mla: Popp, Julian, et al. “Joining of CFRT/Steel Hybrid Parts via Direct Pressing
of Cold Formed Non-Rotational Symmetric Pin Structures.” Applied Sciences,
vol. 12, no. 10, 4962, MDPI AG, 2022, doi:10.3390/app12104962.
short: J. Popp, D. Römisch, M. Merklein, D. Drummer, Applied Sciences 12 (2022).
date_created: 2022-12-05T21:48:01Z
date_updated: 2022-12-05T21:49:30Z
doi: 10.3390/app12104962
intvolume: ' 12'
issue: '10'
keyword:
- Fluid Flow and Transfer Processes
- Computer Science Applications
- Process Chemistry and Technology
- General Engineering
- Instrumentation
- General Materials Science
language:
- iso: eng
project:
- _id: '130'
grant_number: '418701707'
name: 'TRR 285: TRR 285'
- _id: '133'
name: 'TRR 285 - C: TRR 285 - Project Area C'
- _id: '145'
name: 'TRR 285 – C01: TRR 285 - Subproject C01'
publication: Applied Sciences
publication_identifier:
issn:
- 2076-3417
publication_status: published
publisher: MDPI AG
status: public
title: Joining of CFRT/Steel Hybrid Parts via Direct Pressing of Cold Formed Non-Rotational
Symmetric Pin Structures
type: journal_article
user_id: '7850'
volume: 12
year: '2022'
...
---
_id: '31479'
author:
- first_name: Surender
full_name: Baswana, Surender
last_name: Baswana
- first_name: Shiv
full_name: Gupta, Shiv
last_name: Gupta
- first_name: Till
full_name: Knollmann, Till
id: '39241'
last_name: Knollmann
orcid: 0000-0003-2014-4696
citation:
ama: Baswana S, Gupta S, Knollmann T. Mincut Sensitivity Data Structures for the
Insertion of an Edge. Algorithmica. Published online 2022. doi:10.1007/s00453-022-00978-0
apa: Baswana, S., Gupta, S., & Knollmann, T. (2022). Mincut Sensitivity Data
Structures for the Insertion of an Edge. Algorithmica. https://doi.org/10.1007/s00453-022-00978-0
bibtex: '@article{Baswana_Gupta_Knollmann_2022, title={Mincut Sensitivity Data Structures
for the Insertion of an Edge}, DOI={10.1007/s00453-022-00978-0},
journal={Algorithmica}, publisher={Springer Science and Business Media LLC}, author={Baswana,
Surender and Gupta, Shiv and Knollmann, Till}, year={2022} }'
chicago: Baswana, Surender, Shiv Gupta, and Till Knollmann. “Mincut Sensitivity
Data Structures for the Insertion of an Edge.” Algorithmica, 2022. https://doi.org/10.1007/s00453-022-00978-0.
ieee: 'S. Baswana, S. Gupta, and T. Knollmann, “Mincut Sensitivity Data Structures
for the Insertion of an Edge,” Algorithmica, 2022, doi: 10.1007/s00453-022-00978-0.'
mla: Baswana, Surender, et al. “Mincut Sensitivity Data Structures for the Insertion
of an Edge.” Algorithmica, Springer Science and Business Media LLC, 2022,
doi:10.1007/s00453-022-00978-0.
short: S. Baswana, S. Gupta, T. Knollmann, Algorithmica (2022).
date_created: 2022-05-27T10:09:24Z
date_updated: 2022-05-27T10:14:27Z
department:
- _id: '63'
doi: 10.1007/s00453-022-00978-0
genbank:
- tillk
keyword:
- Applied Mathematics
- Computer Science Applications
- General Computer Science
language:
- iso: eng
project:
- _id: '1'
name: 'SFB 901: SFB 901'
- _id: '2'
name: 'SFB 901 - A: SFB 901 - Project Area A'
- _id: '5'
name: 'SFB 901 - A1: SFB 901 - Subproject A1'
publication: Algorithmica
publication_identifier:
issn:
- 0178-4617
- 1432-0541
publication_status: published
publisher: Springer Science and Business Media LLC
status: public
title: Mincut Sensitivity Data Structures for the Insertion of an Edge
type: journal_article
user_id: '39241'
year: '2022'
...
---
_id: '31547'
author:
- first_name: Marcel
full_name: Hanke, Marcel
last_name: Hanke
- first_name: Daniel
full_name: Dornbusch, Daniel
last_name: Dornbusch
- first_name: Christoph
full_name: Hadlich, Christoph
last_name: Hadlich
- first_name: Andre
full_name: Rossberg, Andre
last_name: Rossberg
- first_name: Niklas
full_name: Hansen, Niklas
last_name: Hansen
- first_name: Guido
full_name: Grundmeier, Guido
id: '194'
last_name: Grundmeier
- first_name: Satoru
full_name: Tsushima, Satoru
last_name: Tsushima
- first_name: Adrian
full_name: Keller, Adrian
id: '48864'
last_name: Keller
orcid: 0000-0001-7139-3110
- first_name: Karim
full_name: Fahmy, Karim
last_name: Fahmy
citation:
ama: Hanke M, Dornbusch D, Hadlich C, et al. Anion-specific structure and stability
of guanidinium-bound DNA origami. Computational and Structural Biotechnology
Journal. 2022;20:2611-2623. doi:10.1016/j.csbj.2022.05.037
apa: Hanke, M., Dornbusch, D., Hadlich, C., Rossberg, A., Hansen, N., Grundmeier,
G., Tsushima, S., Keller, A., & Fahmy, K. (2022). Anion-specific structure
and stability of guanidinium-bound DNA origami. Computational and Structural
Biotechnology Journal, 20, 2611–2623. https://doi.org/10.1016/j.csbj.2022.05.037
bibtex: '@article{Hanke_Dornbusch_Hadlich_Rossberg_Hansen_Grundmeier_Tsushima_Keller_Fahmy_2022,
title={Anion-specific structure and stability of guanidinium-bound DNA origami},
volume={20}, DOI={10.1016/j.csbj.2022.05.037},
journal={Computational and Structural Biotechnology Journal}, publisher={Elsevier
BV}, author={Hanke, Marcel and Dornbusch, Daniel and Hadlich, Christoph and Rossberg,
Andre and Hansen, Niklas and Grundmeier, Guido and Tsushima, Satoru and Keller,
Adrian and Fahmy, Karim}, year={2022}, pages={2611–2623} }'
chicago: 'Hanke, Marcel, Daniel Dornbusch, Christoph Hadlich, Andre Rossberg, Niklas
Hansen, Guido Grundmeier, Satoru Tsushima, Adrian Keller, and Karim Fahmy. “Anion-Specific
Structure and Stability of Guanidinium-Bound DNA Origami.” Computational and
Structural Biotechnology Journal 20 (2022): 2611–23. https://doi.org/10.1016/j.csbj.2022.05.037.'
ieee: 'M. Hanke et al., “Anion-specific structure and stability of guanidinium-bound
DNA origami,” Computational and Structural Biotechnology Journal, vol.
20, pp. 2611–2623, 2022, doi: 10.1016/j.csbj.2022.05.037.'
mla: Hanke, Marcel, et al. “Anion-Specific Structure and Stability of Guanidinium-Bound
DNA Origami.” Computational and Structural Biotechnology Journal, vol.
20, Elsevier BV, 2022, pp. 2611–23, doi:10.1016/j.csbj.2022.05.037.
short: M. Hanke, D. Dornbusch, C. Hadlich, A. Rossberg, N. Hansen, G. Grundmeier,
S. Tsushima, A. Keller, K. Fahmy, Computational and Structural Biotechnology Journal
20 (2022) 2611–2623.
date_created: 2022-05-31T07:25:23Z
date_updated: 2022-05-31T07:26:17Z
department:
- _id: '302'
doi: 10.1016/j.csbj.2022.05.037
intvolume: ' 20'
keyword:
- Computer Science Applications
- Genetics
- Biochemistry
- Structural Biology
- Biophysics
- Biotechnology
language:
- iso: eng
page: 2611-2623
publication: Computational and Structural Biotechnology Journal
publication_identifier:
issn:
- 2001-0370
publication_status: published
publisher: Elsevier BV
status: public
title: Anion-specific structure and stability of guanidinium-bound DNA origami
type: journal_article
user_id: '48864'
volume: 20
year: '2022'
...
---
_id: '34414'
abstract:
- lang: eng
text: Given a steadily increasing demand on multi-material lightweight designs,
fast and cost-efficient production technologies, such as the mechanical joining
process clinching, are becoming more and more relevant for series production.
Since the application of such joining techniques often base on the ability to
reach similar or even better joint loading capacities compared to established
joining processes (e.g., spot welding), few contributions investigated the systematic
improvement of clinch joint characteristics. In this regard, the use of data-driven
methods in combination with optimization algorithms showed already high potentials
for the analysis of individual joints and the definition of optimal tool configurations.
However, the often missing consideration of uncertainties, such as varying material
properties, and the related calculation of their impact on clinch joint properties
can lead to poor estimation results and thus to a decreased reliability of the
entire joint connection. This can cause major challenges, especially for the design
and dimensioning of safety-relevant components, such as in car bodies. Motivated
by this, the presented contribution introduces a novel method for the robust estimation
of clinch joint characteristics including uncertainties of varying and versatile
process chains in mechanical joining. Therefore, the utilization of Gaussian process
regression models is demonstrated and evaluated regarding the ability to achieve
sufficient prediction qualities.
author:
- first_name: Christoph
full_name: Zirngibl, Christoph
last_name: Zirngibl
- first_name: Benjamin
full_name: Schleich, Benjamin
last_name: Schleich
- first_name: Sandro
full_name: Wartzack, Sandro
last_name: Wartzack
citation:
ama: Zirngibl C, Schleich B, Wartzack S. Robust estimation of clinch joint characteristics
based on data-driven methods. The International Journal of Advanced Manufacturing
Technology. Published online 2022. doi:10.1007/s00170-022-10441-7
apa: Zirngibl, C., Schleich, B., & Wartzack, S. (2022). Robust estimation of
clinch joint characteristics based on data-driven methods. The International
Journal of Advanced Manufacturing Technology. https://doi.org/10.1007/s00170-022-10441-7
bibtex: '@article{Zirngibl_Schleich_Wartzack_2022, title={Robust estimation of clinch
joint characteristics based on data-driven methods}, DOI={10.1007/s00170-022-10441-7},
journal={The International Journal of Advanced Manufacturing Technology}, publisher={Springer
Science and Business Media LLC}, author={Zirngibl, Christoph and Schleich, Benjamin
and Wartzack, Sandro}, year={2022} }'
chicago: Zirngibl, Christoph, Benjamin Schleich, and Sandro Wartzack. “Robust Estimation
of Clinch Joint Characteristics Based on Data-Driven Methods.” The International
Journal of Advanced Manufacturing Technology, 2022. https://doi.org/10.1007/s00170-022-10441-7.
ieee: 'C. Zirngibl, B. Schleich, and S. Wartzack, “Robust estimation of clinch joint
characteristics based on data-driven methods,” The International Journal of
Advanced Manufacturing Technology, 2022, doi: 10.1007/s00170-022-10441-7.'
mla: Zirngibl, Christoph, et al. “Robust Estimation of Clinch Joint Characteristics
Based on Data-Driven Methods.” The International Journal of Advanced Manufacturing
Technology, Springer Science and Business Media LLC, 2022, doi:10.1007/s00170-022-10441-7.
short: C. Zirngibl, B. Schleich, S. Wartzack, The International Journal of Advanced
Manufacturing Technology (2022).
date_created: 2022-12-14T12:24:29Z
date_updated: 2023-01-02T11:14:26Z
department:
- _id: '630'
doi: 10.1007/s00170-022-10441-7
keyword:
- Industrial and Manufacturing Engineering
- Computer Science Applications
- Mechanical Engineering
- Software
- Control and Systems Engineering
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://link.springer.com/article/10.1007/s00170-022-10441-7
oa: '1'
project:
- _id: '130'
grant_number: '418701707'
name: 'TRR 285: TRR 285'
- _id: '132'
name: 'TRR 285 - B: TRR 285 - Project Area B'
- _id: '144'
name: 'TRR 285 – B05: TRR 285 - Subproject B05'
publication: The International Journal of Advanced Manufacturing Technology
publication_identifier:
issn:
- 0268-3768
- 1433-3015
publication_status: published
publisher: Springer Science and Business Media LLC
status: public
title: Robust estimation of clinch joint characteristics based on data-driven methods
type: journal_article
user_id: '14931'
year: '2022'
...
---
_id: '34046'
author:
- first_name: Christin
full_name: Hoffmann, Christin
last_name: Hoffmann
- first_name: Kirsten
full_name: Thommes, Kirsten
id: '72497'
last_name: Thommes
citation:
ama: Hoffmann C, Thommes K. Seizing the Opportunity for Automation—How Traffic Density
Determines Truck Drivers’ Use of Cruise Control. IEEE Transactions on Human-Machine
Systems. Published online 2022:1-11. doi:10.1109/thms.2022.3212335
apa: Hoffmann, C., & Thommes, K. (2022). Seizing the Opportunity for Automation—How
Traffic Density Determines Truck Drivers’ Use of Cruise Control. IEEE Transactions
on Human-Machine Systems, 1–11. https://doi.org/10.1109/thms.2022.3212335
bibtex: '@article{Hoffmann_Thommes_2022, title={Seizing the Opportunity for Automation—How
Traffic Density Determines Truck Drivers’ Use of Cruise Control}, DOI={10.1109/thms.2022.3212335},
journal={IEEE Transactions on Human-Machine Systems}, publisher={Institute of
Electrical and Electronics Engineers (IEEE)}, author={Hoffmann, Christin and Thommes,
Kirsten}, year={2022}, pages={1–11} }'
chicago: Hoffmann, Christin, and Kirsten Thommes. “Seizing the Opportunity for Automation—How
Traffic Density Determines Truck Drivers’ Use of Cruise Control.” IEEE Transactions
on Human-Machine Systems, 2022, 1–11. https://doi.org/10.1109/thms.2022.3212335.
ieee: 'C. Hoffmann and K. Thommes, “Seizing the Opportunity for Automation—How Traffic
Density Determines Truck Drivers’ Use of Cruise Control,” IEEE Transactions
on Human-Machine Systems, pp. 1–11, 2022, doi: 10.1109/thms.2022.3212335.'
mla: Hoffmann, Christin, and Kirsten Thommes. “Seizing the Opportunity for Automation—How
Traffic Density Determines Truck Drivers’ Use of Cruise Control.” IEEE Transactions
on Human-Machine Systems, Institute of Electrical and Electronics Engineers
(IEEE), 2022, pp. 1–11, doi:10.1109/thms.2022.3212335.
short: C. Hoffmann, K. Thommes, IEEE Transactions on Human-Machine Systems (2022)
1–11.
date_created: 2022-11-10T07:49:01Z
date_updated: 2023-01-09T14:05:54Z
department:
- _id: '178'
- _id: '184'
doi: 10.1109/thms.2022.3212335
keyword:
- Artificial Intelligence
- Computer Networks and Communications
- Computer Science Applications
- Human-Computer Interaction
- Signal Processing
- Control and Systems Engineering
- Human Factors and Ergonomics
language:
- iso: eng
page: 1-11
publication: IEEE Transactions on Human-Machine Systems
publication_identifier:
issn:
- 2168-2291
- 2168-2305
publication_status: published
publisher: Institute of Electrical and Electronics Engineers (IEEE)
quality_controlled: '1'
status: public
title: Seizing the Opportunity for Automation—How Traffic Density Determines Truck
Drivers' Use of Cruise Control
type: journal_article
user_id: '72497'
year: '2022'
...
---
_id: '35522'
abstract:
- lang: eng
text: Following concepts describing lesson planning as a form of anticipatory
reflection, preservice physics teachers’ reflection skills are assumed to be positively
connected with their planning skills. However, empirical evidence on this is scarce.
To explore how relations between these specific skills change over the course
of a field experience controlling for influences of professional knowledge, we
conduct a pre-post field study with N = 95 preservice physics teachers in a one-semester
field experience. Content knowledge (CK) and pedagogical content knowledge (PCK)
(paper-and-pencil tests), and reflection and planning skills (standardized performance
assessments) were assessed before and after the field experience. Path analyses
revealed almost no influence of reflection skills on planning skills. Reflections
skills did not contribute to preservice teachers planning skills beyond knowledge,
indicating both constructs might represent rather independent abilities. The results
show the need for further development of models describing the development of
teachers’ professional knowledge and skills in academic teacher education and
for the development of concepts for a better integration of reflection and lesson
planning in field experiences.
article_number: '479'
author:
- first_name: Christoph
full_name: Vogelsang, Christoph
id: '4245'
last_name: Vogelsang
- first_name: Christoph
full_name: Kulgemeyer, Christoph
last_name: Kulgemeyer
- first_name: Josef
full_name: Riese, Josef
last_name: Riese
citation:
ama: Vogelsang C, Kulgemeyer C, Riese J. Learning to Plan by Learning to Reflect?—Exploring
Relations between Professional Knowledge, Reflection Skills, and Planning Skills
of Preservice Physics Teachers in a One-Semester Field Experience. Education
Sciences. 2022;12(7). doi:10.3390/educsci12070479
apa: Vogelsang, C., Kulgemeyer, C., & Riese, J. (2022). Learning to Plan by
Learning to Reflect?—Exploring Relations between Professional Knowledge, Reflection
Skills, and Planning Skills of Preservice Physics Teachers in a One-Semester Field
Experience. Education Sciences, 12(7), Article 479. https://doi.org/10.3390/educsci12070479
bibtex: '@article{Vogelsang_Kulgemeyer_Riese_2022, title={Learning to Plan by Learning
to Reflect?—Exploring Relations between Professional Knowledge, Reflection Skills,
and Planning Skills of Preservice Physics Teachers in a One-Semester Field Experience},
volume={12}, DOI={10.3390/educsci12070479},
number={7479}, journal={Education Sciences}, publisher={MDPI AG}, author={Vogelsang,
Christoph and Kulgemeyer, Christoph and Riese, Josef}, year={2022} }'
chicago: Vogelsang, Christoph, Christoph Kulgemeyer, and Josef Riese. “Learning
to Plan by Learning to Reflect?—Exploring Relations between Professional Knowledge,
Reflection Skills, and Planning Skills of Preservice Physics Teachers in a One-Semester
Field Experience.” Education Sciences 12, no. 7 (2022). https://doi.org/10.3390/educsci12070479.
ieee: 'C. Vogelsang, C. Kulgemeyer, and J. Riese, “Learning to Plan by Learning
to Reflect?—Exploring Relations between Professional Knowledge, Reflection Skills,
and Planning Skills of Preservice Physics Teachers in a One-Semester Field Experience,”
Education Sciences, vol. 12, no. 7, Art. no. 479, 2022, doi: 10.3390/educsci12070479.'
mla: Vogelsang, Christoph, et al. “Learning to Plan by Learning to Reflect?—Exploring
Relations between Professional Knowledge, Reflection Skills, and Planning Skills
of Preservice Physics Teachers in a One-Semester Field Experience.” Education
Sciences, vol. 12, no. 7, 479, MDPI AG, 2022, doi:10.3390/educsci12070479.
short: C. Vogelsang, C. Kulgemeyer, J. Riese, Education Sciences 12 (2022).
date_created: 2023-01-09T15:25:28Z
date_updated: 2023-01-09T15:27:20Z
department:
- _id: '299'
- _id: '33'
doi: 10.3390/educsci12070479
intvolume: ' 12'
issue: '7'
keyword:
- Public Administration
- Developmental and Educational Psychology
- Education
- Computer Science Applications
- Computer Science (miscellaneous)
- Physical Therapy
- Sports Therapy and Rehabilitation
language:
- iso: eng
publication: Education Sciences
publication_identifier:
issn:
- 2227-7102
publication_status: published
publisher: MDPI AG
status: public
title: Learning to Plan by Learning to Reflect?—Exploring Relations between Professional
Knowledge, Reflection Skills, and Planning Skills of Preservice Physics Teachers
in a One-Semester Field Experience
type: journal_article
user_id: '4245'
volume: 12
year: '2022'
...
---
_id: '35740'
abstract:
- lang: eng
text: AbstractWhile the Information Systems (IS)
discipline has researched digital platforms extensively, the body of knowledge
appertaining to platforms still appears fragmented and lacking conceptual consistency.
Based on automated text mining and unsupervised machine learning, we collect,
analyze, and interpret the IS discipline’s comprehensive research on platforms—comprising
11,049 papers spanning 44 years of research activity. From a cluster analysis
concerning platform concepts’ semantically most similar words, we identify six
research streams on platforms, each with their own platform terms. Based on interpreting
the identified concepts vis-à-vis the extant research and considering a temporal
perspective on the concepts’ application, we present a lexicon of platform concepts,
to guide further research on platforms in the IS discipline. Researchers and managers
can build on our results to position their work appropriately, applying a specific
theoretical perspective on platforms in isolation or combining multiple perspectives
to study platform phenomena at a more abstract level.
author:
- first_name: Christian
full_name: Bartelheimer, Christian
last_name: Bartelheimer
- first_name: Philipp
full_name: zur Heiden, Philipp
last_name: zur Heiden
- first_name: Hedda
full_name: Lüttenberg, Hedda
last_name: Lüttenberg
- first_name: Daniel
full_name: Beverungen, Daniel
last_name: Beverungen
citation:
ama: 'Bartelheimer C, zur Heiden P, Lüttenberg H, Beverungen D. Systematizing the
lexicon of platforms in information systems: a data-driven study. Electronic
Markets. 2022;32(1):375-396. doi:10.1007/s12525-022-00530-6'
apa: 'Bartelheimer, C., zur Heiden, P., Lüttenberg, H., & Beverungen, D. (2022).
Systematizing the lexicon of platforms in information systems: a data-driven study.
Electronic Markets, 32(1), 375–396. https://doi.org/10.1007/s12525-022-00530-6'
bibtex: '@article{Bartelheimer_zur Heiden_Lüttenberg_Beverungen_2022, title={Systematizing
the lexicon of platforms in information systems: a data-driven study}, volume={32},
DOI={10.1007/s12525-022-00530-6},
number={1}, journal={Electronic Markets}, publisher={Springer Science and Business
Media LLC}, author={Bartelheimer, Christian and zur Heiden, Philipp and Lüttenberg,
Hedda and Beverungen, Daniel}, year={2022}, pages={375–396} }'
chicago: 'Bartelheimer, Christian, Philipp zur Heiden, Hedda Lüttenberg, and Daniel
Beverungen. “Systematizing the Lexicon of Platforms in Information Systems: A
Data-Driven Study.” Electronic Markets 32, no. 1 (2022): 375–96. https://doi.org/10.1007/s12525-022-00530-6.'
ieee: 'C. Bartelheimer, P. zur Heiden, H. Lüttenberg, and D. Beverungen, “Systematizing
the lexicon of platforms in information systems: a data-driven study,” Electronic
Markets, vol. 32, no. 1, pp. 375–396, 2022, doi: 10.1007/s12525-022-00530-6.'
mla: 'Bartelheimer, Christian, et al. “Systematizing the Lexicon of Platforms in
Information Systems: A Data-Driven Study.” Electronic Markets, vol. 32,
no. 1, Springer Science and Business Media LLC, 2022, pp. 375–96, doi:10.1007/s12525-022-00530-6.'
short: C. Bartelheimer, P. zur Heiden, H. Lüttenberg, D. Beverungen, Electronic
Markets 32 (2022) 375–396.
date_created: 2023-01-10T10:10:17Z
date_updated: 2023-01-10T10:12:09Z
department:
- _id: '526'
doi: 10.1007/s12525-022-00530-6
intvolume: ' 32'
issue: '1'
keyword:
- Management of Technology and Innovation
- Marketing
- Computer Science Applications
- Economics and Econometrics
- Business and International Management
language:
- iso: eng
page: 375-396
publication: Electronic Markets
publication_identifier:
issn:
- 1019-6781
- 1422-8890
publication_status: published
publisher: Springer Science and Business Media LLC
status: public
title: 'Systematizing the lexicon of platforms in information systems: a data-driven
study'
type: journal_article
user_id: '21671'
volume: 32
year: '2022'
...
---
_id: '44637'
article_number: '100258'
author:
- first_name: Julia Amelie
full_name: Hoppe, Julia Amelie
id: '73093'
last_name: Hoppe
- first_name: Outi
full_name: Tuisku, Outi
last_name: Tuisku
- first_name: Rose-Marie
full_name: Johansson-Pajala, Rose-Marie
last_name: Johansson-Pajala
- first_name: Satu
full_name: Pekkarinen, Satu
last_name: Pekkarinen
- first_name: Lea
full_name: Hennala, Lea
last_name: Hennala
- first_name: Christine
full_name: Gustafsson, Christine
last_name: Gustafsson
- first_name: Helinä
full_name: Melkas, Helinä
last_name: Melkas
- first_name: Kirsten
full_name: Thommes, Kirsten
id: '72497'
last_name: Thommes
citation:
ama: Hoppe JA, Tuisku O, Johansson-Pajala R-M, et al. When do individuals choose
care robots over a human caregiver? Insights from a laboratory experiment on choices
under uncertainty. Computers in Human Behavior Reports. 2022;9. doi:10.1016/j.chbr.2022.100258
apa: Hoppe, J. A., Tuisku, O., Johansson-Pajala, R.-M., Pekkarinen, S., Hennala,
L., Gustafsson, C., Melkas, H., & Thommes, K. (2022). When do individuals
choose care robots over a human caregiver? Insights from a laboratory experiment
on choices under uncertainty. Computers in Human Behavior Reports, 9,
Article 100258. https://doi.org/10.1016/j.chbr.2022.100258
bibtex: '@article{Hoppe_Tuisku_Johansson-Pajala_Pekkarinen_Hennala_Gustafsson_Melkas_Thommes_2022,
title={When do individuals choose care robots over a human caregiver? Insights
from a laboratory experiment on choices under uncertainty}, volume={9}, DOI={10.1016/j.chbr.2022.100258},
number={100258}, journal={Computers in Human Behavior Reports}, publisher={Elsevier
BV}, author={Hoppe, Julia Amelie and Tuisku, Outi and Johansson-Pajala, Rose-Marie
and Pekkarinen, Satu and Hennala, Lea and Gustafsson, Christine and Melkas, Helinä
and Thommes, Kirsten}, year={2022} }'
chicago: Hoppe, Julia Amelie, Outi Tuisku, Rose-Marie Johansson-Pajala, Satu Pekkarinen,
Lea Hennala, Christine Gustafsson, Helinä Melkas, and Kirsten Thommes. “When Do
Individuals Choose Care Robots over a Human Caregiver? Insights from a Laboratory
Experiment on Choices under Uncertainty.” Computers in Human Behavior Reports
9 (2022). https://doi.org/10.1016/j.chbr.2022.100258.
ieee: 'J. A. Hoppe et al., “When do individuals choose care robots over a
human caregiver? Insights from a laboratory experiment on choices under uncertainty,”
Computers in Human Behavior Reports, vol. 9, Art. no. 100258, 2022, doi:
10.1016/j.chbr.2022.100258.'
mla: Hoppe, Julia Amelie, et al. “When Do Individuals Choose Care Robots over a
Human Caregiver? Insights from a Laboratory Experiment on Choices under Uncertainty.”
Computers in Human Behavior Reports, vol. 9, 100258, Elsevier BV, 2022,
doi:10.1016/j.chbr.2022.100258.
short: J.A. Hoppe, O. Tuisku, R.-M. Johansson-Pajala, S. Pekkarinen, L. Hennala,
C. Gustafsson, H. Melkas, K. Thommes, Computers in Human Behavior Reports 9 (2022).
date_created: 2023-05-08T12:28:18Z
date_updated: 2023-12-06T09:17:32Z
department:
- _id: '178'
- _id: '184'
doi: 10.1016/j.chbr.2022.100258
intvolume: ' 9'
keyword:
- Artificial Intelligence
- Cognitive Neuroscience
- Computer Science Applications
- Human-Computer Interaction
- Applied Psychology
- Neuroscience (miscellaneous)
language:
- iso: eng
project:
- _id: '46'
grant_number: 16SV7954
name: 'ORIENT: Use of care robots in welfare services: New models for effective
orientation'
publication: Computers in Human Behavior Reports
publication_identifier:
issn:
- 2451-9588
publication_status: published
publisher: Elsevier BV
status: public
title: When do individuals choose care robots over a human caregiver? Insights from
a laboratory experiment on choices under uncertainty
type: journal_article
user_id: '42933'
volume: 9
year: '2022'
...
---
_id: '34295'
article_number: '100258'
author:
- first_name: Julia Amelie
full_name: Hoppe, Julia Amelie
id: '73093'
last_name: Hoppe
- first_name: Outi
full_name: Tuisku, Outi
last_name: Tuisku
- first_name: Rose-Marie
full_name: Johansson-Pajala, Rose-Marie
last_name: Johansson-Pajala
- first_name: Satu
full_name: Pekkarinen, Satu
last_name: Pekkarinen
- first_name: Lea
full_name: Hennala, Lea
last_name: Hennala
- first_name: Christine
full_name: Gustafsson, Christine
last_name: Gustafsson
- first_name: Helinä
full_name: Melkas, Helinä
last_name: Melkas
- first_name: Kirsten
full_name: Thommes, Kirsten
id: '72497'
last_name: Thommes
citation:
ama: Hoppe JA, Tuisku O, Johansson-Pajala R-M, et al. When do individuals choose
care robots over a human caregiver? Insights from a laboratory experiment on choices
under uncertainty. Computers in Human Behavior Reports. Published online
2022. doi:10.1016/j.chbr.2022.100258
apa: Hoppe, J. A., Tuisku, O., Johansson-Pajala, R.-M., Pekkarinen, S., Hennala,
L., Gustafsson, C., Melkas, H., & Thommes, K. (2022). When do individuals
choose care robots over a human caregiver? Insights from a laboratory experiment
on choices under uncertainty. Computers in Human Behavior Reports, Article
100258. https://doi.org/10.1016/j.chbr.2022.100258
bibtex: '@article{Hoppe_Tuisku_Johansson-Pajala_Pekkarinen_Hennala_Gustafsson_Melkas_Thommes_2022,
title={When do individuals choose care robots over a human caregiver? Insights
from a laboratory experiment on choices under uncertainty}, DOI={10.1016/j.chbr.2022.100258},
number={100258}, journal={Computers in Human Behavior Reports}, publisher={Elsevier
BV}, author={Hoppe, Julia Amelie and Tuisku, Outi and Johansson-Pajala, Rose-Marie
and Pekkarinen, Satu and Hennala, Lea and Gustafsson, Christine and Melkas, Helinä
and Thommes, Kirsten}, year={2022} }'
chicago: Hoppe, Julia Amelie, Outi Tuisku, Rose-Marie Johansson-Pajala, Satu Pekkarinen,
Lea Hennala, Christine Gustafsson, Helinä Melkas, and Kirsten Thommes. “When Do
Individuals Choose Care Robots over a Human Caregiver? Insights from a Laboratory
Experiment on Choices under Uncertainty.” Computers in Human Behavior Reports,
2022. https://doi.org/10.1016/j.chbr.2022.100258.
ieee: 'J. A. Hoppe et al., “When do individuals choose care robots over a
human caregiver? Insights from a laboratory experiment on choices under uncertainty,”
Computers in Human Behavior Reports, Art. no. 100258, 2022, doi: 10.1016/j.chbr.2022.100258.'
mla: Hoppe, Julia Amelie, et al. “When Do Individuals Choose Care Robots over a
Human Caregiver? Insights from a Laboratory Experiment on Choices under Uncertainty.”
Computers in Human Behavior Reports, 100258, Elsevier BV, 2022, doi:10.1016/j.chbr.2022.100258.
short: J.A. Hoppe, O. Tuisku, R.-M. Johansson-Pajala, S. Pekkarinen, L. Hennala,
C. Gustafsson, H. Melkas, K. Thommes, Computers in Human Behavior Reports (2022).
date_created: 2022-12-09T08:08:57Z
date_updated: 2023-12-06T09:18:14Z
department:
- _id: '178'
- _id: '184'
doi: 10.1016/j.chbr.2022.100258
keyword:
- Artificial Intelligence
- Cognitive Neuroscience
- Computer Science Applications
- Human-Computer Interaction
- Applied Psychology
- Neuroscience (miscellaneous)
language:
- iso: eng
project:
- _id: '46'
grant_number: 16SV7954
name: 'ORIENT: Use of care robots in welfare services: New models for effective
orientation'
publication: Computers in Human Behavior Reports
publication_identifier:
issn:
- 2451-9588
publication_status: published
publisher: Elsevier BV
status: public
title: When do individuals choose care robots over a human caregiver? Insights from
a laboratory experiment on choices under uncertainty
type: journal_article
user_id: '42933'
year: '2022'
...
---
_id: '44636'
article_number: '100258'
author:
- first_name: Julia A.
full_name: Hoppe, Julia A.
last_name: Hoppe
- first_name: Outi
full_name: Tuisku, Outi
last_name: Tuisku
- first_name: Rose-Marie
full_name: Johansson-Pajala, Rose-Marie
last_name: Johansson-Pajala
- first_name: Satu
full_name: Pekkarinen, Satu
last_name: Pekkarinen
- first_name: Lea
full_name: Hennala, Lea
last_name: Hennala
- first_name: Christine
full_name: Gustafsson, Christine
last_name: Gustafsson
- first_name: Helinä
full_name: Melkas, Helinä
last_name: Melkas
- first_name: Kirsten
full_name: Thommes, Kirsten
last_name: Thommes
citation:
ama: Hoppe JA, Tuisku O, Johansson-Pajala R-M, et al. When do individuals choose
care robots over a human caregiver? Insights from a laboratory experiment on choices
under uncertainty. Computers in Human Behavior Reports. 2022;9. doi:10.1016/j.chbr.2022.100258
apa: Hoppe, J. A., Tuisku, O., Johansson-Pajala, R.-M., Pekkarinen, S., Hennala,
L., Gustafsson, C., Melkas, H., & Thommes, K. (2022). When do individuals
choose care robots over a human caregiver? Insights from a laboratory experiment
on choices under uncertainty. Computers in Human Behavior Reports, 9,
Article 100258. https://doi.org/10.1016/j.chbr.2022.100258
bibtex: '@article{Hoppe_Tuisku_Johansson-Pajala_Pekkarinen_Hennala_Gustafsson_Melkas_Thommes_2022,
title={When do individuals choose care robots over a human caregiver? Insights
from a laboratory experiment on choices under uncertainty}, volume={9}, DOI={10.1016/j.chbr.2022.100258},
number={100258}, journal={Computers in Human Behavior Reports}, publisher={Elsevier
BV}, author={Hoppe, Julia A. and Tuisku, Outi and Johansson-Pajala, Rose-Marie
and Pekkarinen, Satu and Hennala, Lea and Gustafsson, Christine and Melkas, Helinä
and Thommes, Kirsten}, year={2022} }'
chicago: Hoppe, Julia A., Outi Tuisku, Rose-Marie Johansson-Pajala, Satu Pekkarinen,
Lea Hennala, Christine Gustafsson, Helinä Melkas, and Kirsten Thommes. “When Do
Individuals Choose Care Robots over a Human Caregiver? Insights from a Laboratory
Experiment on Choices under Uncertainty.” Computers in Human Behavior Reports
9 (2022). https://doi.org/10.1016/j.chbr.2022.100258.
ieee: 'J. A. Hoppe et al., “When do individuals choose care robots over a
human caregiver? Insights from a laboratory experiment on choices under uncertainty,”
Computers in Human Behavior Reports, vol. 9, Art. no. 100258, 2022, doi:
10.1016/j.chbr.2022.100258.'
mla: Hoppe, Julia A., et al. “When Do Individuals Choose Care Robots over a Human
Caregiver? Insights from a Laboratory Experiment on Choices under Uncertainty.”
Computers in Human Behavior Reports, vol. 9, 100258, Elsevier BV, 2022,
doi:10.1016/j.chbr.2022.100258.
short: J.A. Hoppe, O. Tuisku, R.-M. Johansson-Pajala, S. Pekkarinen, L. Hennala,
C. Gustafsson, H. Melkas, K. Thommes, Computers in Human Behavior Reports 9 (2022).
date_created: 2023-05-08T12:27:30Z
date_updated: 2023-12-06T09:17:55Z
department:
- _id: '178'
- _id: '184'
doi: 10.1016/j.chbr.2022.100258
intvolume: ' 9'
keyword:
- Artificial Intelligence
- Cognitive Neuroscience
- Computer Science Applications
- Human-Computer Interaction
- Applied Psychology
- Neuroscience (miscellaneous)
language:
- iso: eng
project:
- _id: '46'
grant_number: 16SV7954
name: 'ORIENT: Use of care robots in welfare services: New models for effective
orientation'
publication: Computers in Human Behavior Reports
publication_identifier:
issn:
- 2451-9588
publication_status: published
publisher: Elsevier BV
status: public
title: When do individuals choose care robots over a human caregiver? Insights from
a laboratory experiment on choices under uncertainty
type: journal_article
user_id: '42933'
volume: 9
year: '2022'
...