---
_id: '34000'
abstract:
- lang: eng
text: "Abstract\r\n This paper presents
the characterization of the microstructure evolution during flow forming of austenitic
stainless steel AISI 304L. Due to plastic deformation of metastable austenitic
steel, phase transformation from γ-austenite into α’-martensite occurs. This is
initiated by the formation of shear bands as product of the external stresses.
By means of coupled microscopic and micromagnetic investigations, a characterization
of the microstructure was carried out. In particular, this study shows the distribution
of the strain-induced α’-martensite and its influence on material properties like
hardness at different depths. The microstructural analyses by means of electron
backscattered diffraction (EBSD) technique, evidence a higher amount of α’-martensite
(ca. 23 %) close to the outer specimen surface, where the plastic deformation
and the direct contact with the forming tool take place. In the middle area (ca.
1.5 mm depth from the outer surface), the portion of transformed α’-martensite
drops to 7 % and in the inner surface to 2 %. These results are well correlated
with microhardness and micromagnetic measurements at different depths. EBSD and
atomic force microscopy (AFM) were used to make a detailed characterization of
the topography and degree of deformation of the shear bands. Likewise, the mechanisms
of nucleation of α’-martensite were discussed. This research contributes to the
development of micromagnetic sensors to monitor the evolution of properties during
flow forming. This makes them more suitable for closed-loop property control,
which offers possibilities for an application-oriented and more efficient production."
author:
- first_name: Julian
full_name: Rozo Vasquez, Julian
last_name: Rozo Vasquez
- first_name: Hanigah
full_name: Kanagarajah, Hanigah
last_name: Kanagarajah
- first_name: Bahman
full_name: Arian, Bahman
id: '36287'
last_name: Arian
- first_name: Lukas
full_name: Kersting, Lukas
last_name: Kersting
- first_name: Werner
full_name: Homberg, Werner
id: '233'
last_name: Homberg
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
- first_name: Frank
full_name: Walther, Frank
last_name: Walther
citation:
ama: Rozo Vasquez J, Kanagarajah H, Arian B, et al. Coupled microscopic and micromagnetic
depth-specific analysis of plastic deformation and phase transformation of metastable
austenitic steel AISI 304L by flow forming. Practical Metallography. 2022;59(11):660-675.
doi:10.1515/pm-2022-0064
apa: Rozo Vasquez, J., Kanagarajah, H., Arian, B., Kersting, L., Homberg, W., Trächtler,
A., & Walther, F. (2022). Coupled microscopic and micromagnetic depth-specific
analysis of plastic deformation and phase transformation of metastable austenitic
steel AISI 304L by flow forming. Practical Metallography, 59(11),
660–675. https://doi.org/10.1515/pm-2022-0064
bibtex: '@article{Rozo Vasquez_Kanagarajah_Arian_Kersting_Homberg_Trächtler_Walther_2022,
title={Coupled microscopic and micromagnetic depth-specific analysis of plastic
deformation and phase transformation of metastable austenitic steel AISI 304L
by flow forming}, volume={59}, DOI={10.1515/pm-2022-0064},
number={11}, journal={Practical Metallography}, publisher={Walter de Gruyter GmbH},
author={Rozo Vasquez, Julian and Kanagarajah, Hanigah and Arian, Bahman and Kersting,
Lukas and Homberg, Werner and Trächtler, Ansgar and Walther, Frank}, year={2022},
pages={660–675} }'
chicago: 'Rozo Vasquez, Julian, Hanigah Kanagarajah, Bahman Arian, Lukas Kersting,
Werner Homberg, Ansgar Trächtler, and Frank Walther. “Coupled Microscopic and
Micromagnetic Depth-Specific Analysis of Plastic Deformation and Phase Transformation
of Metastable Austenitic Steel AISI 304L by Flow Forming.” Practical Metallography
59, no. 11 (2022): 660–75. https://doi.org/10.1515/pm-2022-0064.'
ieee: 'J. Rozo Vasquez et al., “Coupled microscopic and micromagnetic depth-specific
analysis of plastic deformation and phase transformation of metastable austenitic
steel AISI 304L by flow forming,” Practical Metallography, vol. 59, no.
11, pp. 660–675, 2022, doi: 10.1515/pm-2022-0064.'
mla: Rozo Vasquez, Julian, et al. “Coupled Microscopic and Micromagnetic Depth-Specific
Analysis of Plastic Deformation and Phase Transformation of Metastable Austenitic
Steel AISI 304L by Flow Forming.” Practical Metallography, vol. 59, no.
11, Walter de Gruyter GmbH, 2022, pp. 660–75, doi:10.1515/pm-2022-0064.
short: J. Rozo Vasquez, H. Kanagarajah, B. Arian, L. Kersting, W. Homberg, A. Trächtler,
F. Walther, Practical Metallography 59 (2022) 660–675.
date_created: 2022-11-04T08:29:21Z
date_updated: 2023-05-02T08:19:27Z
department:
- _id: '156'
- _id: '153'
- _id: '241'
doi: 10.1515/pm-2022-0064
intvolume: ' 59'
issue: '11'
keyword:
- Metals and Alloys
- Mechanics of Materials
- Condensed Matter Physics
- Electronic
- Optical and Magnetic Materials
language:
- iso: eng
page: 660-675
publication: Practical Metallography
publication_identifier:
issn:
- 2195-8599
- 0032-678X
publication_status: published
publisher: Walter de Gruyter GmbH
quality_controlled: '1'
status: public
title: Coupled microscopic and micromagnetic depth-specific analysis of plastic deformation
and phase transformation of metastable austenitic steel AISI 304L by flow forming
type: journal_article
user_id: '36287'
volume: 59
year: '2022'
...
---
_id: '44469'
article_number: '2100397'
author:
- first_name: Dennis
full_name: Menge, Dennis
id: '29240'
last_name: Menge
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
id: '464'
last_name: Schmid
orcid: 000-0001-8590-1921
citation:
ama: Menge D, Schmid H-J. Low Temperature Laser Sintering with PA12 and PA6 on a
Standard System. Macromolecular Symposia. 2022;404(1). doi:10.1002/masy.202100397
apa: Menge, D., & Schmid, H.-J. (2022). Low Temperature Laser Sintering with
PA12 and PA6 on a Standard System. Macromolecular Symposia, 404(1),
Article 2100397. https://doi.org/10.1002/masy.202100397
bibtex: '@article{Menge_Schmid_2022, title={Low Temperature Laser Sintering with
PA12 and PA6 on a Standard System}, volume={404}, DOI={10.1002/masy.202100397},
number={12100397}, journal={Macromolecular Symposia}, publisher={Wiley}, author={Menge,
Dennis and Schmid, Hans-Joachim}, year={2022} }'
chicago: Menge, Dennis, and Hans-Joachim Schmid. “Low Temperature Laser Sintering
with PA12 and PA6 on a Standard System.” Macromolecular Symposia 404, no.
1 (2022). https://doi.org/10.1002/masy.202100397.
ieee: 'D. Menge and H.-J. Schmid, “Low Temperature Laser Sintering with PA12 and
PA6 on a Standard System,” Macromolecular Symposia, vol. 404, no. 1, Art.
no. 2100397, 2022, doi: 10.1002/masy.202100397.'
mla: Menge, Dennis, and Hans-Joachim Schmid. “Low Temperature Laser Sintering with
PA12 and PA6 on a Standard System.” Macromolecular Symposia, vol. 404,
no. 1, 2100397, Wiley, 2022, doi:10.1002/masy.202100397.
short: D. Menge, H.-J. Schmid, Macromolecular Symposia 404 (2022).
date_created: 2023-05-04T08:21:02Z
date_updated: 2023-05-04T08:24:10Z
department:
- _id: '150'
doi: 10.1002/masy.202100397
intvolume: ' 404'
issue: '1'
keyword:
- Materials Chemistry
- Polymers and Plastics
- Organic Chemistry
- Condensed Matter Physics
language:
- iso: eng
publication: Macromolecular Symposia
publication_identifier:
issn:
- 1022-1360
- 1521-3900
publication_status: published
publisher: Wiley
quality_controlled: '1'
status: public
title: Low Temperature Laser Sintering with PA12 and PA6 on a Standard System
type: journal_article
user_id: '3959'
volume: 404
year: '2022'
...
---
_id: '46479'
article_number: '128927'
author:
- first_name: K.
full_name: Bobzin, K.
last_name: Bobzin
- first_name: C.
full_name: Kalscheuer, C.
last_name: Kalscheuer
- first_name: Guido
full_name: Grundmeier, Guido
id: '194'
last_name: Grundmeier
- first_name: S.
full_name: Kollmann, S.
last_name: Kollmann
- first_name: M.
full_name: Carlet, M.
last_name: Carlet
- first_name: Maria Teresa
full_name: de los Arcos de Pedro, Maria Teresa
id: '54556'
last_name: de los Arcos de Pedro
citation:
ama: Bobzin K, Kalscheuer C, Grundmeier G, Kollmann S, Carlet M, de los Arcos de
Pedro MT. Oxidation stability of chromium aluminum oxynitride hard coatings. Surface
and Coatings Technology. 2022;449. doi:10.1016/j.surfcoat.2022.128927
apa: Bobzin, K., Kalscheuer, C., Grundmeier, G., Kollmann, S., Carlet, M., &
de los Arcos de Pedro, M. T. (2022). Oxidation stability of chromium aluminum
oxynitride hard coatings. Surface and Coatings Technology, 449,
Article 128927. https://doi.org/10.1016/j.surfcoat.2022.128927
bibtex: '@article{Bobzin_Kalscheuer_Grundmeier_Kollmann_Carlet_de los Arcos de Pedro_2022,
title={Oxidation stability of chromium aluminum oxynitride hard coatings}, volume={449},
DOI={10.1016/j.surfcoat.2022.128927},
number={128927}, journal={Surface and Coatings Technology}, publisher={Elsevier
BV}, author={Bobzin, K. and Kalscheuer, C. and Grundmeier, Guido and Kollmann,
S. and Carlet, M. and de los Arcos de Pedro, Maria Teresa}, year={2022} }'
chicago: Bobzin, K., C. Kalscheuer, Guido Grundmeier, S. Kollmann, M. Carlet, and
Maria Teresa de los Arcos de Pedro. “Oxidation Stability of Chromium Aluminum
Oxynitride Hard Coatings.” Surface and Coatings Technology 449 (2022).
https://doi.org/10.1016/j.surfcoat.2022.128927.
ieee: 'K. Bobzin, C. Kalscheuer, G. Grundmeier, S. Kollmann, M. Carlet, and M. T.
de los Arcos de Pedro, “Oxidation stability of chromium aluminum oxynitride hard
coatings,” Surface and Coatings Technology, vol. 449, Art. no. 128927,
2022, doi: 10.1016/j.surfcoat.2022.128927.'
mla: Bobzin, K., et al. “Oxidation Stability of Chromium Aluminum Oxynitride Hard
Coatings.” Surface and Coatings Technology, vol. 449, 128927, Elsevier
BV, 2022, doi:10.1016/j.surfcoat.2022.128927.
short: K. Bobzin, C. Kalscheuer, G. Grundmeier, S. Kollmann, M. Carlet, M.T. de
los Arcos de Pedro, Surface and Coatings Technology 449 (2022).
date_created: 2023-08-11T14:08:33Z
date_updated: 2023-08-11T14:13:27Z
department:
- _id: '302'
doi: 10.1016/j.surfcoat.2022.128927
intvolume: ' 449'
keyword:
- Materials Chemistry
- Surfaces
- Coatings and Films
- Surfaces and Interfaces
- Condensed Matter Physics
- General Chemistry
language:
- iso: eng
publication: Surface and Coatings Technology
publication_identifier:
issn:
- 0257-8972
publication_status: published
publisher: Elsevier BV
status: public
title: Oxidation stability of chromium aluminum oxynitride hard coatings
type: journal_article
user_id: '54556'
volume: 449
year: '2022'
...
---
_id: '37713'
author:
- first_name: Fadis F.
full_name: Murzakhanov, Fadis F.
last_name: Murzakhanov
- first_name: Georgy Vladimirovich
full_name: Mamin, Georgy Vladimirovich
last_name: Mamin
- first_name: Sergei Borisovich
full_name: Orlinskii, Sergei Borisovich
last_name: Orlinskii
- first_name: Uwe
full_name: Gerstmann, Uwe
id: '171'
last_name: Gerstmann
orcid: 0000-0002-4476-223X
- first_name: Wolf Gero
full_name: Schmidt, Wolf Gero
id: '468'
last_name: Schmidt
orcid: 0000-0002-2717-5076
- first_name: Timur
full_name: Biktagirov, Timur
id: '65612'
last_name: Biktagirov
- first_name: Igor
full_name: Aharonovich, Igor
last_name: Aharonovich
- first_name: Andreas
full_name: Gottscholl, Andreas
last_name: Gottscholl
- first_name: Andreas
full_name: Sperlich, Andreas
last_name: Sperlich
- first_name: Vladimir
full_name: Dyakonov, Vladimir
last_name: Dyakonov
- first_name: Victor A.
full_name: Soltamov, Victor A.
last_name: Soltamov
citation:
ama: Murzakhanov FF, Mamin GV, Orlinskii SB, et al. Electron–Nuclear Coherent Coupling
and Nuclear Spin Readout through Optically Polarized VB–
Spin States in hBN. Nano Letters. 2022;22(7):2718-2724. doi:10.1021/acs.nanolett.1c04610
apa: Murzakhanov, F. F., Mamin, G. V., Orlinskii, S. B., Gerstmann, U., Schmidt,
W. G., Biktagirov, T., Aharonovich, I., Gottscholl, A., Sperlich, A., Dyakonov,
V., & Soltamov, V. A. (2022). Electron–Nuclear Coherent Coupling and Nuclear
Spin Readout through Optically Polarized VB– Spin States
in hBN. Nano Letters, 22(7), 2718–2724. https://doi.org/10.1021/acs.nanolett.1c04610
bibtex: '@article{Murzakhanov_Mamin_Orlinskii_Gerstmann_Schmidt_Biktagirov_Aharonovich_Gottscholl_Sperlich_Dyakonov_et
al._2022, title={Electron–Nuclear Coherent Coupling and Nuclear Spin Readout through
Optically Polarized VB– Spin States in hBN}, volume={22},
DOI={10.1021/acs.nanolett.1c04610},
number={7}, journal={Nano Letters}, publisher={American Chemical Society (ACS)},
author={Murzakhanov, Fadis F. and Mamin, Georgy Vladimirovich and Orlinskii, Sergei
Borisovich and Gerstmann, Uwe and Schmidt, Wolf Gero and Biktagirov, Timur and
Aharonovich, Igor and Gottscholl, Andreas and Sperlich, Andreas and Dyakonov,
Vladimir and et al.}, year={2022}, pages={2718–2724} }'
chicago: 'Murzakhanov, Fadis F., Georgy Vladimirovich Mamin, Sergei Borisovich Orlinskii,
Uwe Gerstmann, Wolf Gero Schmidt, Timur Biktagirov, Igor Aharonovich, et al. “Electron–Nuclear
Coherent Coupling and Nuclear Spin Readout through Optically Polarized VB–
Spin States in HBN.” Nano Letters 22, no. 7 (2022): 2718–24. https://doi.org/10.1021/acs.nanolett.1c04610.'
ieee: 'F. F. Murzakhanov et al., “Electron–Nuclear Coherent Coupling and
Nuclear Spin Readout through Optically Polarized VB– Spin
States in hBN,” Nano Letters, vol. 22, no. 7, pp. 2718–2724, 2022, doi:
10.1021/acs.nanolett.1c04610.'
mla: Murzakhanov, Fadis F., et al. “Electron–Nuclear Coherent Coupling and Nuclear
Spin Readout through Optically Polarized VB– Spin States
in HBN.” Nano Letters, vol. 22, no. 7, American Chemical Society (ACS),
2022, pp. 2718–24, doi:10.1021/acs.nanolett.1c04610.
short: F.F. Murzakhanov, G.V. Mamin, S.B. Orlinskii, U. Gerstmann, W.G. Schmidt,
T. Biktagirov, I. Aharonovich, A. Gottscholl, A. Sperlich, V. Dyakonov, V.A. Soltamov,
Nano Letters 22 (2022) 2718–2724.
date_created: 2023-01-20T11:21:22Z
date_updated: 2025-12-05T13:57:24Z
department:
- _id: '15'
- _id: '170'
- _id: '295'
- _id: '230'
- _id: '429'
- _id: '35'
- _id: '790'
doi: 10.1021/acs.nanolett.1c04610
intvolume: ' 22'
issue: '7'
keyword:
- Mechanical Engineering
- Condensed Matter Physics
- General Materials Science
- General Chemistry
- Bioengineering
language:
- iso: eng
page: 2718-2724
project:
- _id: '53'
name: 'TRR 142: TRR 142'
- _id: '54'
name: 'TRR 142 - A: TRR 142 - Project Area A'
- _id: '55'
name: 'TRR 142 - B: TRR 142 - Project Area B'
- _id: '166'
name: 'TRR 142 - A11: TRR 142 - Subproject A11'
- _id: '168'
name: 'TRR 142 - B07: TRR 142 - Subproject B07'
- _id: '52'
name: 'PC2: Computing Resources Provided by the Paderborn Center for Parallel Computing'
- _id: '53'
name: 'TRR 142: Maßgeschneiderte nichtlineare Photonik: Von grundlegenden Konzepten
zu funktionellen Strukturen'
publication: Nano Letters
publication_identifier:
issn:
- 1530-6984
- 1530-6992
publication_status: published
publisher: American Chemical Society (ACS)
status: public
title: Electron–Nuclear Coherent Coupling and Nuclear Spin Readout through Optically
Polarized VB– Spin States in hBN
type: journal_article
user_id: '16199'
volume: 22
year: '2022'
...
---
_id: '36332'
abstract:
- lang: eng
text: AlSi casting alloys combine excellent castability with high strength. Hence,
this group of alloys is often used in the automotive sector. The challenge for
this application is the brittle character of these alloys which leads to cracks
during joint formation when mechanical joining technologies are used. A rise in
ductility can be achieved by a considerable increase in the solidification rate
which results in grain refinement. High solidification rates can be realized in
twin–roll casting (TRC) by water-cooled rolls. Therefore, a hypoeutectic EN AC–AlSi9
(for European Norm - aluminum cast product) is manufactured by the TRC process
and analyzed. Subsequently, joining investigations are performed on castings in
as-cast and heat-treated condition using the self-piercing riveting process considering
the joint formation and the load-bearing capacity. Due to the fine microstructure,
the crack initiation can be avoided during joining, while maintaining the joining
parameters, especially by specimens in heat treatment conditions. Furthermore,
due to the extremely fine microstructure, the load-bearing capacity of the joint
can be significantly increased in terms of the maximum load-bearing force and
the energy absorbed.
article_number: '2200874'
article_type: original
author:
- first_name: Moritz
full_name: Neuser, Moritz
id: '32340'
last_name: Neuser
- first_name: Fabian
full_name: Kappe, Fabian
id: '66459'
last_name: Kappe
- first_name: Jakob
full_name: Ostermeier, Jakob
last_name: Ostermeier
- first_name: Jan Tobias
full_name: Krüger, Jan Tobias
id: '44307'
last_name: Krüger
orcid: 0000-0002-0827-9654
- first_name: Mathias
full_name: Bobbert, Mathias
id: '7850'
last_name: Bobbert
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
- first_name: Olexandr
full_name: Grydin, Olexandr
id: '43822'
last_name: Grydin
citation:
ama: Neuser M, Kappe F, Ostermeier J, et al. Mechanical Properties and Joinability
of AlSi9 Alloy Manufactured by Twin‐Roll Casting. Advanced Engineering Materials.
2022;24(10). doi:10.1002/adem.202200874
apa: Neuser, M., Kappe, F., Ostermeier, J., Krüger, J. T., Bobbert, M., Meschut,
G., Schaper, M., & Grydin, O. (2022). Mechanical Properties and Joinability
of AlSi9 Alloy Manufactured by Twin‐Roll Casting. Advanced Engineering Materials,
24(10), Article 2200874. https://doi.org/10.1002/adem.202200874
bibtex: '@article{Neuser_Kappe_Ostermeier_Krüger_Bobbert_Meschut_Schaper_Grydin_2022,
title={Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll
Casting}, volume={24}, DOI={10.1002/adem.202200874},
number={102200874}, journal={Advanced Engineering Materials}, publisher={Wiley},
author={Neuser, Moritz and Kappe, Fabian and Ostermeier, Jakob and Krüger, Jan
Tobias and Bobbert, Mathias and Meschut, Gerson and Schaper, Mirko and Grydin,
Olexandr}, year={2022} }'
chicago: Neuser, Moritz, Fabian Kappe, Jakob Ostermeier, Jan Tobias Krüger, Mathias
Bobbert, Gerson Meschut, Mirko Schaper, and Olexandr Grydin. “Mechanical Properties
and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting.” Advanced
Engineering Materials 24, no. 10 (2022). https://doi.org/10.1002/adem.202200874.
ieee: 'M. Neuser et al., “Mechanical Properties and Joinability of AlSi9
Alloy Manufactured by Twin‐Roll Casting,” Advanced Engineering Materials,
vol. 24, no. 10, Art. no. 2200874, 2022, doi: 10.1002/adem.202200874.'
mla: Neuser, Moritz, et al. “Mechanical Properties and Joinability of AlSi9 Alloy
Manufactured by Twin‐Roll Casting.” Advanced Engineering Materials, vol.
24, no. 10, 2200874, Wiley, 2022, doi:10.1002/adem.202200874.
short: M. Neuser, F. Kappe, J. Ostermeier, J.T. Krüger, M. Bobbert, G. Meschut,
M. Schaper, O. Grydin, Advanced Engineering Materials 24 (2022).
date_created: 2023-01-12T09:33:55Z
date_updated: 2026-05-12T12:15:46Z
department:
- _id: '158'
- _id: '157'
- _id: '321'
doi: 10.1002/adem.202200874
intvolume: ' 24'
issue: '10'
keyword:
- Condensed Matter Physics
- General Materials Science
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://onlinelibrary.wiley.com/doi/full/10.1002/adem.202200874
oa: '1'
project:
- _id: '136'
name: 'TRR 285 – A02: TRR 285 - Subproject A02'
- _id: '131'
name: 'TRR 285 - A: TRR 285 - Project Area A'
- _id: '133'
name: 'TRR 285 - C: TRR 285 - Project Area C'
- _id: '146'
name: 'TRR 285 – C02: TRR 285 - Subproject C02'
- _id: '130'
name: 'TRR 285: Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen
Prozessketten'
publication: Advanced Engineering Materials
publication_identifier:
issn:
- 1438-1656
- 1527-2648
publication_status: published
publisher: Wiley
quality_controlled: '1'
status: public
title: Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll
Casting
type: journal_article
user_id: '7850'
volume: 24
year: '2022'
...
---
_id: '29168'
abstract:
- lang: eng
text: AbstractThe homogeneous density of the liquid
phase is experimentally investigated for methyl diethanolamine. Data are obtained
along five isotherms in a temperature range between 300 K and 360 K for pressures
up to 95 MPa. Two different apparatuses are used to measure the speed of sound
for the temperatures between 322 K and 450 K with a maximum pressure of 95 MPa.
These measurements and literature data are used to develop a fundamental equation
of state for methyl diethanolamine. The model is formulated in terms of the Helmholtz
energy and allows for the calculation of all thermodynamic properties in gaseous,
liquid, supercritical, and saturation states. The experimental data are represented
within their uncertainties. The physical and extrapolation behavior is validated
qualitatively to ensure reasonable calculations outside of the range of validity.
Based on the experimental datasets, the equation of state is valid for temperatures
from 250 K to 750 K and pressures up to 100 MPa.
article_number: '10'
author:
- first_name: Tobias
full_name: Neumann, Tobias
last_name: Neumann
- first_name: Elmar
full_name: Baumhögger, Elmar
id: '15164'
last_name: Baumhögger
- first_name: Roland
full_name: Span, Roland
last_name: Span
- first_name: Jadran
full_name: Vrabec, Jadran
last_name: Vrabec
- first_name: Monika
full_name: Thol, Monika
last_name: Thol
citation:
ama: Neumann T, Baumhögger E, Span R, Vrabec J, Thol M. Thermodynamic Properties
of Methyl Diethanolamine. International Journal of Thermophysics. 2021;43(1).
doi:10.1007/s10765-021-02933-7
apa: Neumann, T., Baumhögger, E., Span, R., Vrabec, J., & Thol, M. (2021). Thermodynamic
Properties of Methyl Diethanolamine. International Journal of Thermophysics,
43(1), Article 10. https://doi.org/10.1007/s10765-021-02933-7
bibtex: '@article{Neumann_Baumhögger_Span_Vrabec_Thol_2021, title={Thermodynamic
Properties of Methyl Diethanolamine}, volume={43}, DOI={10.1007/s10765-021-02933-7},
number={110}, journal={International Journal of Thermophysics}, publisher={Springer
Science and Business Media LLC}, author={Neumann, Tobias and Baumhögger, Elmar
and Span, Roland and Vrabec, Jadran and Thol, Monika}, year={2021} }'
chicago: Neumann, Tobias, Elmar Baumhögger, Roland Span, Jadran Vrabec, and Monika
Thol. “Thermodynamic Properties of Methyl Diethanolamine.” International Journal
of Thermophysics 43, no. 1 (2021). https://doi.org/10.1007/s10765-021-02933-7.
ieee: 'T. Neumann, E. Baumhögger, R. Span, J. Vrabec, and M. Thol, “Thermodynamic
Properties of Methyl Diethanolamine,” International Journal of Thermophysics,
vol. 43, no. 1, Art. no. 10, 2021, doi: 10.1007/s10765-021-02933-7.'
mla: Neumann, Tobias, et al. “Thermodynamic Properties of Methyl Diethanolamine.”
International Journal of Thermophysics, vol. 43, no. 1, 10, Springer Science
and Business Media LLC, 2021, doi:10.1007/s10765-021-02933-7.
short: T. Neumann, E. Baumhögger, R. Span, J. Vrabec, M. Thol, International Journal
of Thermophysics 43 (2021).
date_created: 2022-01-06T09:44:07Z
date_updated: 2022-01-06T09:45:32Z
department:
- _id: '155'
doi: 10.1007/s10765-021-02933-7
intvolume: ' 43'
issue: '1'
keyword:
- Condensed Matter Physics
language:
- iso: eng
publication: International Journal of Thermophysics
publication_identifier:
issn:
- 0195-928X
- 1572-9567
publication_status: published
publisher: Springer Science and Business Media LLC
status: public
title: Thermodynamic Properties of Methyl Diethanolamine
type: journal_article
user_id: '15164'
volume: 43
year: '2021'
...
---
_id: '34647'
article_number: '035204'
author:
- first_name: T
full_name: Brögelmann, T
last_name: Brögelmann
- first_name: K
full_name: Bobzin, K
last_name: Bobzin
- first_name: Guido
full_name: Grundmeier, Guido
id: '194'
last_name: Grundmeier
- first_name: T
full_name: de los Arcos, T
last_name: de los Arcos
- first_name: N C
full_name: Kruppe, N C
last_name: Kruppe
- first_name: S
full_name: Schwiderek, S
last_name: Schwiderek
- first_name: M
full_name: Carlet, M
last_name: Carlet
citation:
ama: 'Brögelmann T, Bobzin K, Grundmeier G, et al. Durability of nanolayer Ti–Al–O–N
hard coatings under simulated polycarbonate melt processing conditions. Journal
of Physics D: Applied Physics. 2021;55(3). doi:10.1088/1361-6463/ac2e31'
apa: 'Brögelmann, T., Bobzin, K., Grundmeier, G., de los Arcos, T., Kruppe, N. C.,
Schwiderek, S., & Carlet, M. (2021). Durability of nanolayer Ti–Al–O–N hard
coatings under simulated polycarbonate melt processing conditions. Journal
of Physics D: Applied Physics, 55(3), Article 035204. https://doi.org/10.1088/1361-6463/ac2e31'
bibtex: '@article{Brögelmann_Bobzin_Grundmeier_de los Arcos_Kruppe_Schwiderek_Carlet_2021,
title={Durability of nanolayer Ti–Al–O–N hard coatings under simulated polycarbonate
melt processing conditions}, volume={55}, DOI={10.1088/1361-6463/ac2e31},
number={3035204}, journal={Journal of Physics D: Applied Physics}, publisher={IOP
Publishing}, author={Brögelmann, T and Bobzin, K and Grundmeier, Guido and de
los Arcos, T and Kruppe, N C and Schwiderek, S and Carlet, M}, year={2021} }'
chicago: 'Brögelmann, T, K Bobzin, Guido Grundmeier, T de los Arcos, N C Kruppe,
S Schwiderek, and M Carlet. “Durability of Nanolayer Ti–Al–O–N Hard Coatings under
Simulated Polycarbonate Melt Processing Conditions.” Journal of Physics D:
Applied Physics 55, no. 3 (2021). https://doi.org/10.1088/1361-6463/ac2e31.'
ieee: 'T. Brögelmann et al., “Durability of nanolayer Ti–Al–O–N hard coatings
under simulated polycarbonate melt processing conditions,” Journal of Physics
D: Applied Physics, vol. 55, no. 3, Art. no. 035204, 2021, doi: 10.1088/1361-6463/ac2e31.'
mla: 'Brögelmann, T., et al. “Durability of Nanolayer Ti–Al–O–N Hard Coatings under
Simulated Polycarbonate Melt Processing Conditions.” Journal of Physics D:
Applied Physics, vol. 55, no. 3, 035204, IOP Publishing, 2021, doi:10.1088/1361-6463/ac2e31.'
short: 'T. Brögelmann, K. Bobzin, G. Grundmeier, T. de los Arcos, N.C. Kruppe, S.
Schwiderek, M. Carlet, Journal of Physics D: Applied Physics 55 (2021).'
date_created: 2022-12-21T09:32:09Z
date_updated: 2022-12-21T09:32:39Z
department:
- _id: '302'
doi: 10.1088/1361-6463/ac2e31
intvolume: ' 55'
issue: '3'
keyword:
- Surfaces
- Coatings and Films
- Acoustics and Ultrasonics
- Condensed Matter Physics
- Electronic
- Optical and Magnetic Materials
language:
- iso: eng
publication: 'Journal of Physics D: Applied Physics'
publication_identifier:
issn:
- 0022-3727
- 1361-6463
publication_status: published
publisher: IOP Publishing
status: public
title: Durability of nanolayer Ti–Al–O–N hard coatings under simulated polycarbonate
melt processing conditions
type: journal_article
user_id: '48864'
volume: 55
year: '2021'
...
---
_id: '34645'
article_number: '2100446'
author:
- first_name: Tripurari Sharan
full_name: Tripathi, Tripurari Sharan
last_name: Tripathi
- first_name: Martin
full_name: Wilken, Martin
last_name: Wilken
- first_name: Christian
full_name: Hoppe, Christian
id: '27401'
last_name: Hoppe
- first_name: Teresa
full_name: de los Arcos, Teresa
last_name: de los Arcos
- first_name: Guido
full_name: Grundmeier, Guido
id: '194'
last_name: Grundmeier
- first_name: Anjana
full_name: Devi, Anjana
last_name: Devi
- first_name: Maarit
full_name: Karppinen, Maarit
last_name: Karppinen
citation:
ama: Tripathi TS, Wilken M, Hoppe C, et al. Atomic Layer Deposition of Copper Metal
Films from Cu(acac) 2 and Hydroquinone Reductant.
Advanced Engineering Materials. 2021;23(10). doi:10.1002/adem.202100446
apa: Tripathi, T. S., Wilken, M., Hoppe, C., de los Arcos, T., Grundmeier, G., Devi,
A., & Karppinen, M. (2021). Atomic Layer Deposition of Copper Metal Films
from Cu(acac) 2 and Hydroquinone Reductant. Advanced
Engineering Materials, 23(10), Article 2100446. https://doi.org/10.1002/adem.202100446
bibtex: '@article{Tripathi_Wilken_Hoppe_de los Arcos_Grundmeier_Devi_Karppinen_2021,
title={Atomic Layer Deposition of Copper Metal Films from Cu(acac)
2 and Hydroquinone Reductant}, volume={23}, DOI={10.1002/adem.202100446},
number={102100446}, journal={Advanced Engineering Materials}, publisher={Wiley},
author={Tripathi, Tripurari Sharan and Wilken, Martin and Hoppe, Christian and
de los Arcos, Teresa and Grundmeier, Guido and Devi, Anjana and Karppinen, Maarit},
year={2021} }'
chicago: Tripathi, Tripurari Sharan, Martin Wilken, Christian Hoppe, Teresa de los
Arcos, Guido Grundmeier, Anjana Devi, and Maarit Karppinen. “Atomic Layer Deposition
of Copper Metal Films from Cu(Acac) 2 and Hydroquinone
Reductant.” Advanced Engineering Materials 23, no. 10 (2021). https://doi.org/10.1002/adem.202100446.
ieee: 'T. S. Tripathi et al., “Atomic Layer Deposition of Copper Metal Films
from Cu(acac) 2 and Hydroquinone Reductant,”
Advanced Engineering Materials, vol. 23, no. 10, Art. no. 2100446, 2021,
doi: 10.1002/adem.202100446.'
mla: Tripathi, Tripurari Sharan, et al. “Atomic Layer Deposition of Copper Metal
Films from Cu(Acac) 2 and Hydroquinone Reductant.”
Advanced Engineering Materials, vol. 23, no. 10, 2100446, Wiley, 2021,
doi:10.1002/adem.202100446.
short: T.S. Tripathi, M. Wilken, C. Hoppe, T. de los Arcos, G. Grundmeier, A. Devi,
M. Karppinen, Advanced Engineering Materials 23 (2021).
date_created: 2022-12-21T09:30:44Z
date_updated: 2022-12-21T09:31:52Z
department:
- _id: '302'
doi: 10.1002/adem.202100446
intvolume: ' 23'
issue: '10'
keyword:
- Condensed Matter Physics
- General Materials Science
language:
- iso: eng
publication: Advanced Engineering Materials
publication_identifier:
issn:
- 1438-1656
- 1527-2648
publication_status: published
publisher: Wiley
status: public
title: Atomic Layer Deposition of Copper Metal Films from Cu(acac) 2 and
Hydroquinone Reductant
type: journal_article
user_id: '48864'
volume: 23
year: '2021'
...
---
_id: '33587'
abstract:
- lang: eng
text: "Abstract\r\n We performed
a virtual materials screening to identify promising topological materials for
photocatalytic water splitting under visible light irradiation. Topological compounds
were screened based on band gap, band edge energy, and thermodynamics stability
criteria. In addition, topological types for our final candidates were computed
based on electronic structures calculated usingthe hybrid density functional theory
including exact Hartree–Fock exchange. Our final list contains materials which
have band gaps between 1.0 and 2.7 eV in addition to band edge energies suitable
for water oxidation and reduction. However, the topological types of these compounds
calculated with the hybrid functional differ from those reported previously. To
that end, we discuss the importance of computational methods for the calculation
of atomic and electronic structures in materials screening processes."
article_number: '015001'
author:
- first_name: Ahmad
full_name: Ranjbar, Ahmad
last_name: Ranjbar
- first_name: Hossein
full_name: Mirhosseini, Hossein
last_name: Mirhosseini
- first_name: Thomas D
full_name: Kühne, Thomas D
last_name: Kühne
citation:
ama: 'Ranjbar A, Mirhosseini H, Kühne TD. On topological materials as photocatalysts
for water splitting by visible light. Journal of Physics: Materials. 2021;5(1).
doi:10.1088/2515-7639/ac363d'
apa: 'Ranjbar, A., Mirhosseini, H., & Kühne, T. D. (2021). On topological materials
as photocatalysts for water splitting by visible light. Journal of Physics:
Materials, 5(1), Article 015001. https://doi.org/10.1088/2515-7639/ac363d'
bibtex: '@article{Ranjbar_Mirhosseini_Kühne_2021, title={On topological materials
as photocatalysts for water splitting by visible light}, volume={5}, DOI={10.1088/2515-7639/ac363d},
number={1015001}, journal={Journal of Physics: Materials}, publisher={IOP Publishing},
author={Ranjbar, Ahmad and Mirhosseini, Hossein and Kühne, Thomas D}, year={2021}
}'
chicago: 'Ranjbar, Ahmad, Hossein Mirhosseini, and Thomas D Kühne. “On Topological
Materials as Photocatalysts for Water Splitting by Visible Light.” Journal
of Physics: Materials 5, no. 1 (2021). https://doi.org/10.1088/2515-7639/ac363d.'
ieee: 'A. Ranjbar, H. Mirhosseini, and T. D. Kühne, “On topological materials as
photocatalysts for water splitting by visible light,” Journal of Physics: Materials,
vol. 5, no. 1, Art. no. 015001, 2021, doi: 10.1088/2515-7639/ac363d.'
mla: 'Ranjbar, Ahmad, et al. “On Topological Materials as Photocatalysts for Water
Splitting by Visible Light.” Journal of Physics: Materials, vol. 5, no.
1, 015001, IOP Publishing, 2021, doi:10.1088/2515-7639/ac363d.'
short: 'A. Ranjbar, H. Mirhosseini, T.D. Kühne, Journal of Physics: Materials 5
(2021).'
date_created: 2022-10-09T15:25:09Z
date_updated: 2022-10-09T15:25:19Z
department:
- _id: '613'
doi: 10.1088/2515-7639/ac363d
intvolume: ' 5'
issue: '1'
keyword:
- Condensed Matter Physics
- General Materials Science
- Atomic and Molecular Physics
- and Optics
language:
- iso: eng
publication: 'Journal of Physics: Materials'
publication_identifier:
issn:
- 2515-7639
publication_status: published
publisher: IOP Publishing
status: public
title: On topological materials as photocatalysts for water splitting by visible light
type: journal_article
user_id: '71051'
volume: 5
year: '2021'
...
---
_id: '33659'
abstract:
- lang: eng
text: "Abstract\r\n We performed
a virtual materials screening to identify promising topological materials for
photocatalytic water splitting under visible light irradiation. Topological compounds
were screened based on band gap, band edge energy, and thermodynamics stability
criteria. In addition, topological types for our final candidates were computed
based on electronic structures calculated usingthe hybrid density functional theory
including exact Hartree–Fock exchange. Our final list contains materials which
have band gaps between 1.0 and 2.7 eV in addition to band edge energies suitable
for water oxidation and reduction. However, the topological types of these compounds
calculated with the hybrid functional differ from those reported previously. To
that end, we discuss the importance of computational methods for the calculation
of atomic and electronic structures in materials screening processes."
article_number: '015001'
author:
- first_name: Ahmad
full_name: Ranjbar, Ahmad
last_name: Ranjbar
- first_name: Hossein
full_name: Mirhosseini, Hossein
id: '71051'
last_name: Mirhosseini
orcid: 0000-0001-6179-1545
- first_name: Thomas
full_name: Kühne, Thomas
id: '49079'
last_name: Kühne
citation:
ama: 'Ranjbar A, Mirhosseini H, Kühne T. On topological materials as photocatalysts
for water splitting by visible light. Journal of Physics: Materials. 2021;5(1).
doi:10.1088/2515-7639/ac363d'
apa: 'Ranjbar, A., Mirhosseini, H., & Kühne, T. (2021). On topological materials
as photocatalysts for water splitting by visible light. Journal of Physics:
Materials, 5(1), Article 015001. https://doi.org/10.1088/2515-7639/ac363d'
bibtex: '@article{Ranjbar_Mirhosseini_Kühne_2021, title={On topological materials
as photocatalysts for water splitting by visible light}, volume={5}, DOI={10.1088/2515-7639/ac363d},
number={1015001}, journal={Journal of Physics: Materials}, publisher={IOP Publishing},
author={Ranjbar, Ahmad and Mirhosseini, Hossein and Kühne, Thomas}, year={2021}
}'
chicago: 'Ranjbar, Ahmad, Hossein Mirhosseini, and Thomas Kühne. “On Topological
Materials as Photocatalysts for Water Splitting by Visible Light.” Journal
of Physics: Materials 5, no. 1 (2021). https://doi.org/10.1088/2515-7639/ac363d.'
ieee: 'A. Ranjbar, H. Mirhosseini, and T. Kühne, “On topological materials as photocatalysts
for water splitting by visible light,” Journal of Physics: Materials, vol.
5, no. 1, Art. no. 015001, 2021, doi: 10.1088/2515-7639/ac363d.'
mla: 'Ranjbar, Ahmad, et al. “On Topological Materials as Photocatalysts for Water
Splitting by Visible Light.” Journal of Physics: Materials, vol. 5, no.
1, 015001, IOP Publishing, 2021, doi:10.1088/2515-7639/ac363d.'
short: 'A. Ranjbar, H. Mirhosseini, T. Kühne, Journal of Physics: Materials 5 (2021).'
date_created: 2022-10-10T08:25:19Z
date_updated: 2022-10-10T08:25:30Z
department:
- _id: '613'
doi: 10.1088/2515-7639/ac363d
intvolume: ' 5'
issue: '1'
keyword:
- Condensed Matter Physics
- General Materials Science
- Atomic and Molecular Physics
- and Optics
language:
- iso: eng
publication: 'Journal of Physics: Materials'
publication_identifier:
issn:
- 2515-7639
publication_status: published
publisher: IOP Publishing
status: public
title: On topological materials as photocatalysts for water splitting by visible light
type: journal_article
user_id: '71051'
volume: 5
year: '2021'
...
---
_id: '35327'
article_number: '121536'
article_type: original
author:
- first_name: Martin
full_name: Wortmann, Martin
last_name: Wortmann
- first_name: Klaus
full_name: Viertel, Klaus
last_name: Viertel
- first_name: Alexander
full_name: Welle, Alexander
last_name: Welle
- first_name: Waldemar
full_name: Keil, Waldemar
last_name: Keil
- first_name: Natalie
full_name: Frese, Natalie
last_name: Frese
- first_name: Wiebke
full_name: Hachmann, Wiebke
last_name: Hachmann
- first_name: Philipp
full_name: Krieger, Philipp
last_name: Krieger
- first_name: Johannes
full_name: Brikmann, Johannes
last_name: Brikmann
- first_name: Claudia
full_name: Schmidt, Claudia
id: '466'
last_name: Schmidt
orcid: 0000-0003-3179-9997
- first_name: Elmar
full_name: Moritzer, Elmar
id: '20531'
last_name: Moritzer
- first_name: Bruno
full_name: Hüsgen, Bruno
last_name: Hüsgen
citation:
ama: Wortmann M, Viertel K, Welle A, et al. Anomalous bulk diffusion of methylene
diphenyl diisocyanate in silicone elastomer. International Journal of Heat
and Mass Transfer. 2021;177. doi:10.1016/j.ijheatmasstransfer.2021.121536
apa: Wortmann, M., Viertel, K., Welle, A., Keil, W., Frese, N., Hachmann, W., Krieger,
P., Brikmann, J., Schmidt, C., Moritzer, E., & Hüsgen, B. (2021). Anomalous
bulk diffusion of methylene diphenyl diisocyanate in silicone elastomer. International
Journal of Heat and Mass Transfer, 177, Article 121536. https://doi.org/10.1016/j.ijheatmasstransfer.2021.121536
bibtex: '@article{Wortmann_Viertel_Welle_Keil_Frese_Hachmann_Krieger_Brikmann_Schmidt_Moritzer_et
al._2021, title={Anomalous bulk diffusion of methylene diphenyl diisocyanate in
silicone elastomer}, volume={177}, DOI={10.1016/j.ijheatmasstransfer.2021.121536},
number={121536}, journal={International Journal of Heat and Mass Transfer}, publisher={Elsevier
BV}, author={Wortmann, Martin and Viertel, Klaus and Welle, Alexander and Keil,
Waldemar and Frese, Natalie and Hachmann, Wiebke and Krieger, Philipp and Brikmann,
Johannes and Schmidt, Claudia and Moritzer, Elmar and et al.}, year={2021} }'
chicago: Wortmann, Martin, Klaus Viertel, Alexander Welle, Waldemar Keil, Natalie
Frese, Wiebke Hachmann, Philipp Krieger, et al. “Anomalous Bulk Diffusion of Methylene
Diphenyl Diisocyanate in Silicone Elastomer.” International Journal of Heat
and Mass Transfer 177 (2021). https://doi.org/10.1016/j.ijheatmasstransfer.2021.121536.
ieee: 'M. Wortmann et al., “Anomalous bulk diffusion of methylene diphenyl
diisocyanate in silicone elastomer,” International Journal of Heat and Mass
Transfer, vol. 177, Art. no. 121536, 2021, doi: 10.1016/j.ijheatmasstransfer.2021.121536.'
mla: Wortmann, Martin, et al. “Anomalous Bulk Diffusion of Methylene Diphenyl Diisocyanate
in Silicone Elastomer.” International Journal of Heat and Mass Transfer,
vol. 177, 121536, Elsevier BV, 2021, doi:10.1016/j.ijheatmasstransfer.2021.121536.
short: M. Wortmann, K. Viertel, A. Welle, W. Keil, N. Frese, W. Hachmann, P. Krieger,
J. Brikmann, C. Schmidt, E. Moritzer, B. Hüsgen, International Journal of Heat
and Mass Transfer 177 (2021).
date_created: 2023-01-06T12:20:46Z
date_updated: 2023-01-07T10:25:55Z
department:
- _id: '2'
- _id: '9'
- _id: '315'
doi: 10.1016/j.ijheatmasstransfer.2021.121536
intvolume: ' 177'
keyword:
- Fluid Flow and Transfer Processes
- Mechanical Engineering
- Condensed Matter Physics
language:
- iso: eng
publication: International Journal of Heat and Mass Transfer
publication_identifier:
issn:
- 0017-9310
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: Anomalous bulk diffusion of methylene diphenyl diisocyanate in silicone elastomer
type: journal_article
user_id: '466'
volume: 177
year: '2021'
...
---
_id: '47963'
abstract:
- lang: eng
text: Nonlinear and quantum optical devices based on periodically-poled thin film
lithium niobate (PP-TFLN) have gained considerable interest lately, due to their
significantly improved performance as compared to their bulk counterparts. Nevertheless,
performance parameters such as conversion efficiency, minimum pump power, and
spectral bandwidth strongly depend on the quality of the domain structure in these
PP-TFLN samples, e.g., their homogeneity and duty cycle, as well as on the overlap
and penetration depth of domains with the waveguide mode. Hence, in order to propose
improved fabrication protocols, a profound quality control of domain structures
is needed that allows quantifying and thoroughly analyzing these parameters. In
this paper, we propose to combine a set of nanometer-to-micrometer-scale imaging
techniques, i.e., piezoresponse force microscopy (PFM), second-harmonic generation
(SHG), and Raman spectroscopy (RS), to access the relevant and crucial sample
properties through cross-correlating these methods. Based on our findings, we
designate SHG to be the best-suited standard imaging technique for this purpose,
in particular when investigating the domain poling process in x-cut TFLNs. While
PFM is excellently recommended for near-surface high-resolution imaging, RS provides
thorough insights into stress and/or defect distributions, as associated with
these domain structures. In this context, our work here indicates unexpectedly
large signs for internal fields occurring in x-cut PP-TFLNs that are substantially
larger as compared to previous observations in bulk LN.
article_number: '288'
article_type: original
author:
- first_name: Sven
full_name: Reitzig, Sven
last_name: Reitzig
- first_name: Michael
full_name: Rüsing, Michael
id: '22501'
last_name: Rüsing
orcid: 0000-0003-4682-4577
- first_name: Jie
full_name: Zhao, Jie
last_name: Zhao
- first_name: Benjamin
full_name: Kirbus, Benjamin
last_name: Kirbus
- first_name: Shayan
full_name: Mookherjea, Shayan
last_name: Mookherjea
- first_name: Lukas M.
full_name: Eng, Lukas M.
last_name: Eng
citation:
ama: Reitzig S, Rüsing M, Zhao J, Kirbus B, Mookherjea S, Eng LM. “Seeing Is Believing”—In-Depth
Analysis by Co-Imaging of Periodically-Poled X-Cut Lithium Niobate Thin Films.
Crystals. 2021;11(3). doi:10.3390/cryst11030288
apa: Reitzig, S., Rüsing, M., Zhao, J., Kirbus, B., Mookherjea, S., & Eng, L.
M. (2021). “Seeing Is Believing”—In-Depth Analysis by Co-Imaging of Periodically-Poled
X-Cut Lithium Niobate Thin Films. Crystals, 11(3), Article 288.
https://doi.org/10.3390/cryst11030288
bibtex: '@article{Reitzig_Rüsing_Zhao_Kirbus_Mookherjea_Eng_2021, title={“Seeing
Is Believing”—In-Depth Analysis by Co-Imaging of Periodically-Poled X-Cut Lithium
Niobate Thin Films}, volume={11}, DOI={10.3390/cryst11030288},
number={3288}, journal={Crystals}, publisher={MDPI AG}, author={Reitzig, Sven
and Rüsing, Michael and Zhao, Jie and Kirbus, Benjamin and Mookherjea, Shayan
and Eng, Lukas M.}, year={2021} }'
chicago: Reitzig, Sven, Michael Rüsing, Jie Zhao, Benjamin Kirbus, Shayan Mookherjea,
and Lukas M. Eng. “‘Seeing Is Believing’—In-Depth Analysis by Co-Imaging of Periodically-Poled
X-Cut Lithium Niobate Thin Films.” Crystals 11, no. 3 (2021). https://doi.org/10.3390/cryst11030288.
ieee: 'S. Reitzig, M. Rüsing, J. Zhao, B. Kirbus, S. Mookherjea, and L. M. Eng,
“‘Seeing Is Believing’—In-Depth Analysis by Co-Imaging of Periodically-Poled X-Cut
Lithium Niobate Thin Films,” Crystals, vol. 11, no. 3, Art. no. 288, 2021,
doi: 10.3390/cryst11030288.'
mla: Reitzig, Sven, et al. “‘Seeing Is Believing’—In-Depth Analysis by Co-Imaging
of Periodically-Poled X-Cut Lithium Niobate Thin Films.” Crystals, vol.
11, no. 3, 288, MDPI AG, 2021, doi:10.3390/cryst11030288.
short: S. Reitzig, M. Rüsing, J. Zhao, B. Kirbus, S. Mookherjea, L.M. Eng, Crystals
11 (2021).
date_created: 2023-10-11T08:19:51Z
date_updated: 2023-10-11T08:20:25Z
doi: 10.3390/cryst11030288
extern: '1'
intvolume: ' 11'
issue: '3'
keyword:
- Inorganic Chemistry
- Condensed Matter Physics
- General Materials Science
- General Chemical Engineering
language:
- iso: eng
publication: Crystals
publication_identifier:
issn:
- 2073-4352
publication_status: published
publisher: MDPI AG
quality_controlled: '1'
status: public
title: “Seeing Is Believing”—In-Depth Analysis by Co-Imaging of Periodically-Poled
X-Cut Lithium Niobate Thin Films
type: journal_article
user_id: '22501'
volume: 11
year: '2021'
...
---
_id: '47964'
abstract:
- lang: eng
text: In the last two decades, variably doped strontium barium niobate (SBN) has
attracted a lot of scientific interest mainly due to its specific non-linear optical
response. Comparably, the parental compound, i.e., undoped SBN, appears to be
less studied so far. Here, two different cuts of single-crystalline nominally
pure strontium barium niobate in the composition Sr0.61Ba0.39Nb2O6 (SBN61) are
comprehensively studied and analyzed with regard to their photoconductive responses.
We present conductance measurements under systematically varied illumination conditions
along either the polar z-axis or perpendicular to it (x-cut). Apart from a pronounced
photoconductance (PC) already under daylight and a large effect upon super-bandgap
illumination in general, we observe (i) distinct spectral features when sweeping
the excitation wavelength over the sub-bandgap region as then discussed in the
context of deep and shallow trap states, (ii) extremely slow long-term relaxation
for both light-on and light-off transients in the range of hours and days, (iii)
a critical dependence of the photoresponse on the pre-illumination history of
the sample, and (iv) a current–voltage hysteresis depending on both the illumination
and the electrical-measurement conditions in a complex manner.
article_number: '780'
article_type: original
author:
- first_name: Elke
full_name: Beyreuther, Elke
last_name: Beyreuther
- first_name: Julius
full_name: Ratzenberger, Julius
last_name: Ratzenberger
- first_name: Matthias
full_name: Roeper, Matthias
last_name: Roeper
- first_name: Benjamin
full_name: Kirbus, Benjamin
last_name: Kirbus
- first_name: Michael
full_name: Rüsing, Michael
id: '22501'
last_name: Rüsing
orcid: 0000-0003-4682-4577
- first_name: Liudmila I.
full_name: Ivleva, Liudmila I.
last_name: Ivleva
- first_name: Lukas M.
full_name: Eng, Lukas M.
last_name: Eng
citation:
ama: Beyreuther E, Ratzenberger J, Roeper M, et al. Photoconduction of Polar and
Nonpolar Cuts of Undoped Sr0.61Ba0.39Nb2O6 Single Crystals. Crystals. 2021;11(7).
doi:10.3390/cryst11070780
apa: Beyreuther, E., Ratzenberger, J., Roeper, M., Kirbus, B., Rüsing, M., Ivleva,
L. I., & Eng, L. M. (2021). Photoconduction of Polar and Nonpolar Cuts of
Undoped Sr0.61Ba0.39Nb2O6 Single Crystals. Crystals, 11(7), Article
780. https://doi.org/10.3390/cryst11070780
bibtex: '@article{Beyreuther_Ratzenberger_Roeper_Kirbus_Rüsing_Ivleva_Eng_2021,
title={Photoconduction of Polar and Nonpolar Cuts of Undoped Sr0.61Ba0.39Nb2O6
Single Crystals}, volume={11}, DOI={10.3390/cryst11070780},
number={7780}, journal={Crystals}, publisher={MDPI AG}, author={Beyreuther, Elke
and Ratzenberger, Julius and Roeper, Matthias and Kirbus, Benjamin and Rüsing,
Michael and Ivleva, Liudmila I. and Eng, Lukas M.}, year={2021} }'
chicago: Beyreuther, Elke, Julius Ratzenberger, Matthias Roeper, Benjamin Kirbus,
Michael Rüsing, Liudmila I. Ivleva, and Lukas M. Eng. “Photoconduction of Polar
and Nonpolar Cuts of Undoped Sr0.61Ba0.39Nb2O6 Single Crystals.” Crystals
11, no. 7 (2021). https://doi.org/10.3390/cryst11070780.
ieee: 'E. Beyreuther et al., “Photoconduction of Polar and Nonpolar Cuts
of Undoped Sr0.61Ba0.39Nb2O6 Single Crystals,” Crystals, vol. 11, no. 7,
Art. no. 780, 2021, doi: 10.3390/cryst11070780.'
mla: Beyreuther, Elke, et al. “Photoconduction of Polar and Nonpolar Cuts of Undoped
Sr0.61Ba0.39Nb2O6 Single Crystals.” Crystals, vol. 11, no. 7, 780, MDPI
AG, 2021, doi:10.3390/cryst11070780.
short: E. Beyreuther, J. Ratzenberger, M. Roeper, B. Kirbus, M. Rüsing, L.I. Ivleva,
L.M. Eng, Crystals 11 (2021).
date_created: 2023-10-11T08:20:40Z
date_updated: 2023-10-11T08:21:17Z
doi: 10.3390/cryst11070780
extern: '1'
funded_apc: '1'
intvolume: ' 11'
issue: '7'
keyword:
- Inorganic Chemistry
- Condensed Matter Physics
- General Materials Science
- General Chemical Engineering
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://doi.org/10.3390/cryst11070780
oa: '1'
publication: Crystals
publication_identifier:
issn:
- 2073-4352
publication_status: published
publisher: MDPI AG
quality_controlled: '1'
status: public
title: Photoconduction of Polar and Nonpolar Cuts of Undoped Sr0.61Ba0.39Nb2O6 Single
Crystals
type: journal_article
user_id: '22501'
volume: 11
year: '2021'
...
---
_id: '41817'
abstract:
- lang: eng
text: Pseudo isocyanine chloride monomers equilibrate with H-oligomers and,
separated by a threshold, with H-oligomers and fiber-like J-aggregates. The mechanism
and thermodynamics of J-aggregate formation is interpreted with the concept of
chain growth.
author:
- first_name: Benjamin
full_name: Hämisch, Benjamin
last_name: Hämisch
- first_name: Klaus
full_name: Huber, Klaus
id: '237'
last_name: Huber
citation:
ama: Hämisch B, Huber K. Mechanism and equilibrium thermodynamics of H- and J-aggregate
formation from pseudo isocyanine chloride in water. Soft Matter. 2021;17(35):8140-8152.
doi:10.1039/d1sm00979f
apa: Hämisch, B., & Huber, K. (2021). Mechanism and equilibrium thermodynamics
of H- and J-aggregate formation from pseudo isocyanine chloride in water. Soft
Matter, 17(35), 8140–8152. https://doi.org/10.1039/d1sm00979f
bibtex: '@article{Hämisch_Huber_2021, title={Mechanism and equilibrium thermodynamics
of H- and J-aggregate formation from pseudo isocyanine chloride in water}, volume={17},
DOI={10.1039/d1sm00979f}, number={35},
journal={Soft Matter}, publisher={Royal Society of Chemistry (RSC)}, author={Hämisch,
Benjamin and Huber, Klaus}, year={2021}, pages={8140–8152} }'
chicago: 'Hämisch, Benjamin, and Klaus Huber. “Mechanism and Equilibrium Thermodynamics
of H- and J-Aggregate Formation from Pseudo Isocyanine Chloride in Water.” Soft
Matter 17, no. 35 (2021): 8140–52. https://doi.org/10.1039/d1sm00979f.'
ieee: 'B. Hämisch and K. Huber, “Mechanism and equilibrium thermodynamics of H-
and J-aggregate formation from pseudo isocyanine chloride in water,” Soft Matter,
vol. 17, no. 35, pp. 8140–8152, 2021, doi: 10.1039/d1sm00979f.'
mla: Hämisch, Benjamin, and Klaus Huber. “Mechanism and Equilibrium Thermodynamics
of H- and J-Aggregate Formation from Pseudo Isocyanine Chloride in Water.” Soft
Matter, vol. 17, no. 35, Royal Society of Chemistry (RSC), 2021, pp. 8140–52,
doi:10.1039/d1sm00979f.
short: B. Hämisch, K. Huber, Soft Matter 17 (2021) 8140–8152.
date_created: 2023-02-06T12:08:04Z
date_updated: 2023-02-06T12:08:46Z
department:
- _id: '314'
doi: 10.1039/d1sm00979f
intvolume: ' 17'
issue: '35'
keyword:
- Condensed Matter Physics
- General Chemistry
language:
- iso: eng
page: 8140-8152
publication: Soft Matter
publication_identifier:
issn:
- 1744-683X
- 1744-6848
publication_status: published
publisher: Royal Society of Chemistry (RSC)
status: public
title: Mechanism and equilibrium thermodynamics of H- and J-aggregate formation from
pseudo isocyanine chloride in water
type: journal_article
user_id: '237'
volume: 17
year: '2021'
...
---
_id: '40244'
article_number: '2100462'
author:
- first_name: Lukas
full_name: Meier, Lukas
last_name: Meier
- first_name: Wolf Gero
full_name: Schmidt, Wolf Gero
id: '468'
last_name: Schmidt
orcid: 0000-0002-2717-5076
citation:
ama: Meier L, Schmidt WG. GaInP/AlInP(001) Interfaces from Density Functional Theory.
physica status solidi (b). 2021;259(1). doi:10.1002/pssb.202100462
apa: Meier, L., & Schmidt, W. G. (2021). GaInP/AlInP(001) Interfaces from Density
Functional Theory. Physica Status Solidi (b), 259(1), Article 2100462.
https://doi.org/10.1002/pssb.202100462
bibtex: '@article{Meier_Schmidt_2021, title={GaInP/AlInP(001) Interfaces from Density
Functional Theory}, volume={259}, DOI={10.1002/pssb.202100462},
number={12100462}, journal={physica status solidi (b)}, publisher={Wiley}, author={Meier,
Lukas and Schmidt, Wolf Gero}, year={2021} }'
chicago: Meier, Lukas, and Wolf Gero Schmidt. “GaInP/AlInP(001) Interfaces from
Density Functional Theory.” Physica Status Solidi (b) 259, no. 1 (2021).
https://doi.org/10.1002/pssb.202100462.
ieee: 'L. Meier and W. G. Schmidt, “GaInP/AlInP(001) Interfaces from Density Functional
Theory,” physica status solidi (b), vol. 259, no. 1, Art. no. 2100462,
2021, doi: 10.1002/pssb.202100462.'
mla: Meier, Lukas, and Wolf Gero Schmidt. “GaInP/AlInP(001) Interfaces from Density
Functional Theory.” Physica Status Solidi (b), vol. 259, no. 1, 2100462,
Wiley, 2021, doi:10.1002/pssb.202100462.
short: L. Meier, W.G. Schmidt, Physica Status Solidi (b) 259 (2021).
date_created: 2023-01-26T09:41:51Z
date_updated: 2023-04-20T14:28:22Z
department:
- _id: '15'
- _id: '170'
- _id: '295'
- _id: '230'
- _id: '35'
doi: 10.1002/pssb.202100462
intvolume: ' 259'
issue: '1'
keyword:
- Condensed Matter Physics
- Electronic
- Optical and Magnetic Materials
language:
- iso: eng
project:
- _id: '52'
name: 'PC2: Computing Resources Provided by the Paderborn Center for Parallel Computing'
publication: physica status solidi (b)
publication_identifier:
issn:
- 0370-1972
- 1521-3951
publication_status: published
publisher: Wiley
status: public
title: GaInP/AlInP(001) Interfaces from Density Functional Theory
type: journal_article
user_id: '16199'
volume: 259
year: '2021'
...
---
_id: '41511'
author:
- first_name: Maxwell
full_name: Hein, Maxwell
id: '52771'
last_name: Hein
orcid: 0000-0002-3732-2236
- first_name: Kay-Peter
full_name: Hoyer, Kay-Peter
id: '48411'
last_name: Hoyer
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
citation:
ama: Hein M, Hoyer K-P, Schaper M. Additively processed TiAl6Nb7 alloy for biomedical
applications. Materialwissenschaft und Werkstofftechnik. 2021;52(7):703-716.
doi:10.1002/mawe.202000288
apa: Hein, M., Hoyer, K.-P., & Schaper, M. (2021). Additively processed TiAl6Nb7
alloy for biomedical applications. Materialwissenschaft Und Werkstofftechnik,
52(7), 703–716. https://doi.org/10.1002/mawe.202000288
bibtex: '@article{Hein_Hoyer_Schaper_2021, title={Additively processed TiAl6Nb7
alloy for biomedical applications}, volume={52}, DOI={10.1002/mawe.202000288},
number={7}, journal={Materialwissenschaft und Werkstofftechnik}, publisher={Wiley},
author={Hein, Maxwell and Hoyer, Kay-Peter and Schaper, Mirko}, year={2021}, pages={703–716}
}'
chicago: 'Hein, Maxwell, Kay-Peter Hoyer, and Mirko Schaper. “Additively Processed
TiAl6Nb7 Alloy for Biomedical Applications.” Materialwissenschaft Und Werkstofftechnik
52, no. 7 (2021): 703–16. https://doi.org/10.1002/mawe.202000288.'
ieee: 'M. Hein, K.-P. Hoyer, and M. Schaper, “Additively processed TiAl6Nb7 alloy
for biomedical applications,” Materialwissenschaft und Werkstofftechnik,
vol. 52, no. 7, pp. 703–716, 2021, doi: 10.1002/mawe.202000288.'
mla: Hein, Maxwell, et al. “Additively Processed TiAl6Nb7 Alloy for Biomedical Applications.”
Materialwissenschaft Und Werkstofftechnik, vol. 52, no. 7, Wiley, 2021,
pp. 703–16, doi:10.1002/mawe.202000288.
short: M. Hein, K.-P. Hoyer, M. Schaper, Materialwissenschaft Und Werkstofftechnik
52 (2021) 703–716.
date_created: 2023-02-02T14:33:23Z
date_updated: 2023-06-01T14:33:34Z
department:
- _id: '9'
- _id: '158'
doi: 10.1002/mawe.202000288
intvolume: ' 52'
issue: '7'
keyword:
- Mechanical Engineering
- Mechanics of Materials
- Condensed Matter Physics
- General Materials Science
language:
- iso: eng
page: 703-716
publication: Materialwissenschaft und Werkstofftechnik
publication_identifier:
issn:
- 0933-5137
- 1521-4052
publication_status: published
publisher: Wiley
quality_controlled: '1'
status: public
title: Additively processed TiAl6Nb7 alloy for biomedical applications
type: journal_article
user_id: '43720'
volume: 52
year: '2021'
...
---
_id: '41516'
article_number: '127384'
author:
- first_name: Wolfgang
full_name: Tillmann, Wolfgang
last_name: Tillmann
- first_name: Nelson Filipe
full_name: Lopes Dias, Nelson Filipe
last_name: Lopes Dias
- first_name: Carlo
full_name: Franke, Carlo
last_name: Franke
- first_name: David
full_name: Kokalj, David
last_name: Kokalj
- first_name: Dominic
full_name: Stangier, Dominic
last_name: Stangier
- first_name: Viviane
full_name: Filor, Viviane
last_name: Filor
- first_name: Rafael Hernán
full_name: Mateus-Vargas, Rafael Hernán
last_name: Mateus-Vargas
- first_name: Hilke
full_name: Oltmanns, Hilke
last_name: Oltmanns
- first_name: Manfred
full_name: Kietzmann, Manfred
last_name: Kietzmann
- first_name: Jessica
full_name: Meißner, Jessica
last_name: Meißner
- first_name: Maxwell
full_name: Hein, Maxwell
id: '52771'
last_name: Hein
orcid: 0000-0002-3732-2236
- first_name: Sudipta
full_name: Pramanik, Sudipta
last_name: Pramanik
- first_name: Kay-Peter
full_name: Hoyer, Kay-Peter
id: '48411'
last_name: Hoyer
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
- first_name: Alexander
full_name: Nienhaus, Alexander
last_name: Nienhaus
- first_name: Carl Arne
full_name: Thomann, Carl Arne
last_name: Thomann
- first_name: Jörg
full_name: Debus, Jörg
last_name: Debus
citation:
ama: Tillmann W, Lopes Dias NF, Franke C, et al. Tribo-mechanical properties and
biocompatibility of Ag-containing amorphous carbon films deposited onto Ti6Al4V.
Surface and Coatings Technology. 2021;421. doi:10.1016/j.surfcoat.2021.127384
apa: Tillmann, W., Lopes Dias, N. F., Franke, C., Kokalj, D., Stangier, D., Filor,
V., Mateus-Vargas, R. H., Oltmanns, H., Kietzmann, M., Meißner, J., Hein, M.,
Pramanik, S., Hoyer, K.-P., Schaper, M., Nienhaus, A., Thomann, C. A., & Debus,
J. (2021). Tribo-mechanical properties and biocompatibility of Ag-containing amorphous
carbon films deposited onto Ti6Al4V. Surface and Coatings Technology, 421,
Article 127384. https://doi.org/10.1016/j.surfcoat.2021.127384
bibtex: '@article{Tillmann_Lopes Dias_Franke_Kokalj_Stangier_Filor_Mateus-Vargas_Oltmanns_Kietzmann_Meißner_et
al._2021, title={Tribo-mechanical properties and biocompatibility of Ag-containing
amorphous carbon films deposited onto Ti6Al4V}, volume={421}, DOI={10.1016/j.surfcoat.2021.127384},
number={127384}, journal={Surface and Coatings Technology}, publisher={Elsevier
BV}, author={Tillmann, Wolfgang and Lopes Dias, Nelson Filipe and Franke, Carlo
and Kokalj, David and Stangier, Dominic and Filor, Viviane and Mateus-Vargas,
Rafael Hernán and Oltmanns, Hilke and Kietzmann, Manfred and Meißner, Jessica
and et al.}, year={2021} }'
chicago: Tillmann, Wolfgang, Nelson Filipe Lopes Dias, Carlo Franke, David Kokalj,
Dominic Stangier, Viviane Filor, Rafael Hernán Mateus-Vargas, et al. “Tribo-Mechanical
Properties and Biocompatibility of Ag-Containing Amorphous Carbon Films Deposited
onto Ti6Al4V.” Surface and Coatings Technology 421 (2021). https://doi.org/10.1016/j.surfcoat.2021.127384.
ieee: 'W. Tillmann et al., “Tribo-mechanical properties and biocompatibility
of Ag-containing amorphous carbon films deposited onto Ti6Al4V,” Surface and
Coatings Technology, vol. 421, Art. no. 127384, 2021, doi: 10.1016/j.surfcoat.2021.127384.'
mla: Tillmann, Wolfgang, et al. “Tribo-Mechanical Properties and Biocompatibility
of Ag-Containing Amorphous Carbon Films Deposited onto Ti6Al4V.” Surface and
Coatings Technology, vol. 421, 127384, Elsevier BV, 2021, doi:10.1016/j.surfcoat.2021.127384.
short: W. Tillmann, N.F. Lopes Dias, C. Franke, D. Kokalj, D. Stangier, V. Filor,
R.H. Mateus-Vargas, H. Oltmanns, M. Kietzmann, J. Meißner, M. Hein, S. Pramanik,
K.-P. Hoyer, M. Schaper, A. Nienhaus, C.A. Thomann, J. Debus, Surface and Coatings
Technology 421 (2021).
date_created: 2023-02-02T14:35:21Z
date_updated: 2023-06-01T14:33:50Z
department:
- _id: '9'
- _id: '158'
doi: 10.1016/j.surfcoat.2021.127384
intvolume: ' 421'
keyword:
- Materials Chemistry
- Surfaces
- Coatings and Films
- Surfaces and Interfaces
- Condensed Matter Physics
- General Chemistry
language:
- iso: eng
publication: Surface and Coatings Technology
publication_identifier:
issn:
- 0257-8972
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: Tribo-mechanical properties and biocompatibility of Ag-containing amorphous
carbon films deposited onto Ti6Al4V
type: journal_article
user_id: '43720'
volume: 421
year: '2021'
...
---
_id: '41512'
article_number: '141662'
author:
- first_name: Anatolii
full_name: Andreiev, Anatolii
id: '50215'
last_name: Andreiev
- first_name: Kay-Peter
full_name: Hoyer, Kay-Peter
id: '48411'
last_name: Hoyer
- first_name: Dimitri
full_name: Dula, Dimitri
last_name: Dula
- first_name: Florian
full_name: Hengsbach, Florian
last_name: Hengsbach
- first_name: Olexandr
full_name: Grydin, Olexandr
id: '43822'
last_name: Grydin
- first_name: Yaroslav
full_name: Frolov, Yaroslav
last_name: Frolov
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
citation:
ama: 'Andreiev A, Hoyer K-P, Dula D, et al. Laser beam melting of functionally graded
materials with application-adapted tailoring of magnetic and mechanical performance.
Materials Science and Engineering: A. 2021;822. doi:10.1016/j.msea.2021.141662'
apa: 'Andreiev, A., Hoyer, K.-P., Dula, D., Hengsbach, F., Grydin, O., Frolov, Y.,
& Schaper, M. (2021). Laser beam melting of functionally graded materials
with application-adapted tailoring of magnetic and mechanical performance. Materials
Science and Engineering: A, 822, Article 141662. https://doi.org/10.1016/j.msea.2021.141662'
bibtex: '@article{Andreiev_Hoyer_Dula_Hengsbach_Grydin_Frolov_Schaper_2021, title={Laser
beam melting of functionally graded materials with application-adapted tailoring
of magnetic and mechanical performance}, volume={822}, DOI={10.1016/j.msea.2021.141662},
number={141662}, journal={Materials Science and Engineering: A}, publisher={Elsevier
BV}, author={Andreiev, Anatolii and Hoyer, Kay-Peter and Dula, Dimitri and Hengsbach,
Florian and Grydin, Olexandr and Frolov, Yaroslav and Schaper, Mirko}, year={2021}
}'
chicago: 'Andreiev, Anatolii, Kay-Peter Hoyer, Dimitri Dula, Florian Hengsbach,
Olexandr Grydin, Yaroslav Frolov, and Mirko Schaper. “Laser Beam Melting of Functionally
Graded Materials with Application-Adapted Tailoring of Magnetic and Mechanical
Performance.” Materials Science and Engineering: A 822 (2021). https://doi.org/10.1016/j.msea.2021.141662.'
ieee: 'A. Andreiev et al., “Laser beam melting of functionally graded materials
with application-adapted tailoring of magnetic and mechanical performance,” Materials
Science and Engineering: A, vol. 822, Art. no. 141662, 2021, doi: 10.1016/j.msea.2021.141662.'
mla: 'Andreiev, Anatolii, et al. “Laser Beam Melting of Functionally Graded Materials
with Application-Adapted Tailoring of Magnetic and Mechanical Performance.” Materials
Science and Engineering: A, vol. 822, 141662, Elsevier BV, 2021, doi:10.1016/j.msea.2021.141662.'
short: 'A. Andreiev, K.-P. Hoyer, D. Dula, F. Hengsbach, O. Grydin, Y. Frolov, M.
Schaper, Materials Science and Engineering: A 822 (2021).'
date_created: 2023-02-02T14:33:52Z
date_updated: 2023-06-01T14:35:26Z
department:
- _id: '9'
- _id: '158'
doi: 10.1016/j.msea.2021.141662
intvolume: ' 822'
keyword:
- Mechanical Engineering
- Mechanics of Materials
- Condensed Matter Physics
- General Materials Science
language:
- iso: eng
publication: 'Materials Science and Engineering: A'
publication_identifier:
issn:
- 0921-5093
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: Laser beam melting of functionally graded materials with application-adapted
tailoring of magnetic and mechanical performance
type: journal_article
user_id: '43720'
volume: 822
year: '2021'
...
---
_id: '41509'
article_number: '130890'
author:
- first_name: Jan Tobias
full_name: Krüger, Jan Tobias
id: '44307'
last_name: Krüger
orcid: 0000-0002-0827-9654
- first_name: Kay-Peter
full_name: Hoyer, Kay-Peter
id: '48411'
last_name: Hoyer
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
citation:
ama: Krüger JT, Hoyer K-P, Schaper M. Bioresorbable AgCe and AgCeLa alloys for adapted
Fe-based implants. Materials Letters. 2021;306. doi:10.1016/j.matlet.2021.130890
apa: Krüger, J. T., Hoyer, K.-P., & Schaper, M. (2021). Bioresorbable AgCe and
AgCeLa alloys for adapted Fe-based implants. Materials Letters, 306,
Article 130890. https://doi.org/10.1016/j.matlet.2021.130890
bibtex: '@article{Krüger_Hoyer_Schaper_2021, title={Bioresorbable AgCe and AgCeLa
alloys for adapted Fe-based implants}, volume={306}, DOI={10.1016/j.matlet.2021.130890},
number={130890}, journal={Materials Letters}, publisher={Elsevier BV}, author={Krüger,
Jan Tobias and Hoyer, Kay-Peter and Schaper, Mirko}, year={2021} }'
chicago: Krüger, Jan Tobias, Kay-Peter Hoyer, and Mirko Schaper. “Bioresorbable
AgCe and AgCeLa Alloys for Adapted Fe-Based Implants.” Materials Letters
306 (2021). https://doi.org/10.1016/j.matlet.2021.130890.
ieee: 'J. T. Krüger, K.-P. Hoyer, and M. Schaper, “Bioresorbable AgCe and AgCeLa
alloys for adapted Fe-based implants,” Materials Letters, vol. 306, Art.
no. 130890, 2021, doi: 10.1016/j.matlet.2021.130890.'
mla: Krüger, Jan Tobias, et al. “Bioresorbable AgCe and AgCeLa Alloys for Adapted
Fe-Based Implants.” Materials Letters, vol. 306, 130890, Elsevier BV, 2021,
doi:10.1016/j.matlet.2021.130890.
short: J.T. Krüger, K.-P. Hoyer, M. Schaper, Materials Letters 306 (2021).
date_created: 2023-02-02T14:32:48Z
date_updated: 2023-06-01T14:34:08Z
department:
- _id: '9'
- _id: '158'
doi: 10.1016/j.matlet.2021.130890
intvolume: ' 306'
keyword:
- Mechanical Engineering
- Mechanics of Materials
- Condensed Matter Physics
- General Materials Science
language:
- iso: eng
publication: Materials Letters
publication_identifier:
issn:
- 0167-577X
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: Bioresorbable AgCe and AgCeLa alloys for adapted Fe-based implants
type: journal_article
user_id: '43720'
volume: 306
year: '2021'
...
---
_id: '46017'
author:
- first_name: Dawei
full_name: Zhang, Dawei
last_name: Zhang
- first_name: Zheng-Dong
full_name: Luo, Zheng-Dong
last_name: Luo
- first_name: Yin
full_name: Yao, Yin
last_name: Yao
- first_name: Peggy
full_name: Schoenherr, Peggy
last_name: Schoenherr
- first_name: Chuhan
full_name: Sha, Chuhan
last_name: Sha
- first_name: Ying
full_name: Pan, Ying
id: '100383'
last_name: Pan
- first_name: Pankaj
full_name: Sharma, Pankaj
last_name: Sharma
- first_name: Marin
full_name: Alexe, Marin
last_name: Alexe
- first_name: Jan
full_name: Seidel, Jan
last_name: Seidel
citation:
ama: Zhang D, Luo Z-D, Yao Y, et al. Anisotropic Ion Migration and Electronic Conduction
in van der Waals Ferroelectric CuInP2S6. Nano Letters. 2021;21(2):995-1002.
doi:10.1021/acs.nanolett.0c04023
apa: Zhang, D., Luo, Z.-D., Yao, Y., Schoenherr, P., Sha, C., Pan, Y., Sharma, P.,
Alexe, M., & Seidel, J. (2021). Anisotropic Ion Migration and Electronic Conduction
in van der Waals Ferroelectric CuInP2S6. Nano Letters, 21(2), 995–1002.
https://doi.org/10.1021/acs.nanolett.0c04023
bibtex: '@article{Zhang_Luo_Yao_Schoenherr_Sha_Pan_Sharma_Alexe_Seidel_2021, title={Anisotropic
Ion Migration and Electronic Conduction in van der Waals Ferroelectric CuInP2S6},
volume={21}, DOI={10.1021/acs.nanolett.0c04023},
number={2}, journal={Nano Letters}, publisher={American Chemical Society (ACS)},
author={Zhang, Dawei and Luo, Zheng-Dong and Yao, Yin and Schoenherr, Peggy and
Sha, Chuhan and Pan, Ying and Sharma, Pankaj and Alexe, Marin and Seidel, Jan},
year={2021}, pages={995–1002} }'
chicago: 'Zhang, Dawei, Zheng-Dong Luo, Yin Yao, Peggy Schoenherr, Chuhan Sha, Ying
Pan, Pankaj Sharma, Marin Alexe, and Jan Seidel. “Anisotropic Ion Migration and
Electronic Conduction in van Der Waals Ferroelectric CuInP2S6.” Nano Letters
21, no. 2 (2021): 995–1002. https://doi.org/10.1021/acs.nanolett.0c04023.'
ieee: 'D. Zhang et al., “Anisotropic Ion Migration and Electronic Conduction
in van der Waals Ferroelectric CuInP2S6,” Nano Letters, vol. 21, no. 2,
pp. 995–1002, 2021, doi: 10.1021/acs.nanolett.0c04023.'
mla: Zhang, Dawei, et al. “Anisotropic Ion Migration and Electronic Conduction in
van Der Waals Ferroelectric CuInP2S6.” Nano Letters, vol. 21, no. 2, American
Chemical Society (ACS), 2021, pp. 995–1002, doi:10.1021/acs.nanolett.0c04023.
short: D. Zhang, Z.-D. Luo, Y. Yao, P. Schoenherr, C. Sha, Y. Pan, P. Sharma, M.
Alexe, J. Seidel, Nano Letters 21 (2021) 995–1002.
date_created: 2023-07-11T16:48:45Z
date_updated: 2023-07-11T16:54:28Z
doi: 10.1021/acs.nanolett.0c04023
extern: '1'
intvolume: ' 21'
issue: '2'
keyword:
- Mechanical Engineering
- Condensed Matter Physics
- General Materials Science
- General Chemistry
- Bioengineering
language:
- iso: eng
page: 995-1002
publication: Nano Letters
publication_identifier:
issn:
- 1530-6984
- 1530-6992
publication_status: published
publisher: American Chemical Society (ACS)
status: public
title: Anisotropic Ion Migration and Electronic Conduction in van der Waals Ferroelectric
CuInP2S6
type: journal_article
user_id: '100383'
volume: 21
year: '2021'
...