[{"oa":"1","citation":{"mla":"Bender, Amelie. “A Multi-Model-Particle Filtering-Based Prognostic Approach to Consider Uncertainties in RUL Predictions.” Machines, vol. 9, no. 10, 210, 2021, doi:10.3390/machines9100210.","apa":"Bender, A. (2021). A Multi-Model-Particle Filtering-Based Prognostic Approach to Consider Uncertainties in RUL Predictions. Machines, 9(10), Article 210. https://doi.org/10.3390/machines9100210","ieee":"A. Bender, “A Multi-Model-Particle Filtering-Based Prognostic Approach to Consider Uncertainties in RUL Predictions,” Machines, vol. 9, no. 10, Art. no. 210, 2021, doi: 10.3390/machines9100210.","chicago":"Bender, Amelie. “A Multi-Model-Particle Filtering-Based Prognostic Approach to Consider Uncertainties in RUL Predictions.” Machines 9, no. 10 (2021). https://doi.org/10.3390/machines9100210.","ama":"Bender A. A Multi-Model-Particle Filtering-Based Prognostic Approach to Consider Uncertainties in RUL Predictions. Machines. 2021;9(10). doi:10.3390/machines9100210","short":"A. Bender, Machines 9 (2021).","bibtex":"@article{Bender_2021, title={A Multi-Model-Particle Filtering-Based Prognostic Approach to Consider Uncertainties in RUL Predictions}, volume={9}, DOI={10.3390/machines9100210}, number={10210}, journal={Machines}, author={Bender, Amelie}, year={2021} }"},"quality_controlled":"1","_id":"25046","user_id":"54290","volume":9,"status":"public","date_created":"2021-09-27T07:07:58Z","type":"journal_article","keyword":["prognostics","RUL predictions","particle filter","uncertainty consideration","Multi-Model-Particle Filter","model-based approach","rubber-metal-elements","predictive maintenance"],"department":[{"_id":"151"}],"publication":"Machines","issue":"10","abstract":[{"text":"While increasing digitalization enables multiple advantages for a reliable operation of technical systems, a remaining challenge in the context of condition monitoring is seen in suitable consideration of uncertainties affecting the monitored system. Therefore, a suitable prognostic approach to predict the remaining useful lifetime of complex technical systems is required. To handle different kinds of uncertainties, a novel Multi-Model-Particle Filtering-based prognostic approach is developed and evaluated by the use case of rubber-metal-elements. These elements are maintained preventively due to the strong influence of uncertainties on their behavior. In this paper, two measurement quantities are compared concerning their ability to establish a prediction of the remaining useful lifetime of the monitored elements and the influence of present uncertainties. Based on three performance indices, the results are evaluated. A comparison with predictions of a classical Particle Filter underlines the superiority of the developed Multi-Model-Particle Filter. Finally, the value of the developed method for enabling condition monitoring of technical systems related to uncertainties is given exemplary by a comparison between the preventive and the predictive maintenance strategy for the use case.","lang":"eng"}],"article_number":"210","main_file_link":[{"open_access":"1","url":"https://www.mdpi.com/2075-1702/9/10/210"}],"language":[{"iso":"eng"}],"doi":"10.3390/machines9100210","title":"A Multi-Model-Particle Filtering-Based Prognostic Approach to Consider Uncertainties in RUL Predictions","year":"2021","author":[{"full_name":"Bender, Amelie","last_name":"Bender","first_name":"Amelie","id":"54290"}],"publication_identifier":{"issn":["2075-1702"]},"publication_status":"published","date_updated":"2022-11-03T11:42:46Z","article_type":"original","intvolume":" 9"},{"status":"public","volume":8,"user_id":"86519","_id":"35202","page":"208–223","citation":{"mla":"Goller, Michael, et al. “Digitalisation in Agriculture: Knowledge and Learning Requirements of German Dairy Farmers.” International Journal for Research in Vocational Education and Training, vol. 8, no. 2, 2021, pp. 208–223, doi:10.13152/IJRVET.8.2.4.","ama":"Goller M, Caruso C, Harteis C. Digitalisation in Agriculture: Knowledge and Learning Requirements of German Dairy Farmers. International Journal for Research in Vocational Education and Training. 2021;8(2):208–223. doi:10.13152/IJRVET.8.2.4.","bibtex":"@article{Goller_Caruso_Harteis_2021, title={Digitalisation in Agriculture: Knowledge and Learning Requirements of German Dairy Farmers}, volume={8}, DOI={10.13152/IJRVET.8.2.4.}, number={2}, journal={International Journal for Research in Vocational Education and Training}, author={Goller, Michael and Caruso, Carina and Harteis, Christian}, year={2021}, pages={208–223} }","apa":"Goller, M., Caruso, C., & Harteis, C. (2021). Digitalisation in Agriculture: Knowledge and Learning Requirements of German Dairy Farmers. International Journal for Research in Vocational Education and Training, 8(2), 208–223. https://doi.org/10.13152/IJRVET.8.2.4.","ieee":"M. Goller, C. Caruso, and C. Harteis, “Digitalisation in Agriculture: Knowledge and Learning Requirements of German Dairy Farmers,” International Journal for Research in Vocational Education and Training, vol. 8, no. 2, pp. 208–223, 2021, doi: 10.13152/IJRVET.8.2.4.","short":"M. Goller, C. Caruso, C. Harteis, International Journal for Research in Vocational Education and Training 8 (2021) 208–223.","chicago":"Goller, Michael, Carina Caruso, and Christian Harteis. “Digitalisation in Agriculture: Knowledge and Learning Requirements of German Dairy Farmers.” International Journal for Research in Vocational Education and Training 8, no. 2 (2021): 208–223. https://doi.org/10.13152/IJRVET.8.2.4."},"intvolume":" 8","date_updated":"2023-01-06T12:17:27Z","publication_status":"published","publication_identifier":{"issn":["2197-8646"]},"author":[{"full_name":"Goller, Michael","first_name":"Michael","last_name":"Goller","orcid":"0000-0002-2820-9178","id":"30984"},{"id":"23123","first_name":"Carina","last_name":"Caruso","full_name":"Caruso, Carina"},{"full_name":"Harteis, Christian","last_name":"Harteis","orcid":"https://orcid.org/0000-0002-3570-7626","first_name":"Christian","id":"27503"}],"year":"2021","title":"Digitalisation in Agriculture: Knowledge and Learning Requirements of German Dairy Farmers","doi":"10.13152/IJRVET.8.2.4.","language":[{"iso":"eng"}],"abstract":[{"text":"Purpose: This study aims at investigating how digitalisation (in the sense of industry 4.0) has changed the work of farmers and how they experience the changes from more traditional work to digitalised agriculture. It also investigates what knowledge farmers require on digitalised farms and how they acquire it. Dairy farming was used as domain of investigation since it, unlike other industries, has strongly been affected by digitalisation throughout the last years.\r\n\r\nMethod: Exploratory interviews with 10 livestock farmers working on digitalised dairy farms were analysed using qualitative content analysis. A deductive and inductive coding strategy was used. \r\n\r\nFindings: Farming work has changed from more manual tasks towards symbol manipulation and data processing. Farmers must be able to use computers and other digital devices to retrieve and analyse sensor data that allow them to monitor and control the processes on their farm. For this new kind of work, farmers require elaborated mental models that link traditional farming knowledge with knowledge about digital systems, including a strong understanding of production processes underlying their farm. Learning is mostly based on instructions offered by manufacturers of the new technology as well as informal and non-formal learning modes. Even younger farmers report that digital technology was not sufficiently covered in their (vocational) degrees. In general, farmers emphasises the positive effects of digitalisation both on their working as well as private life. \r\n\r\nConclusions: Farmers should be aware of the opportunities as well as the potential drawbacks of the digitalisation of work processes in agriculture. Providers of agricultural education (like vocational schools or training institutes) need to incorporate the knowledge and skills required to work in digitalised environments (e.g., data literacy) in their syllabi. Further studies are required to assess how digitalisation changes farming practices and what knowledge as well as skills linked to these developments are required in the future.","lang":"eng"}],"issue":"2","publication":"International Journal for Research in Vocational Education and Training","keyword":["Work-Based Learning","Organisational Change","Digital Competences","Qualitative Research","Digitalisation","Farming","Dairy","VET","Vocational Education and Training"],"type":"journal_article","date_created":"2023-01-04T10:08:59Z"},{"doi":"10.1108/JOSM-03-2020-0066","language":[{"iso":"eng"}],"article_type":"original","intvolume":" 32","publication_status":"published","date_updated":"2024-04-18T12:46:37Z","author":[{"last_name":"Beverungen","first_name":"Daniel","full_name":"Beverungen, Daniel","id":"59677"},{"full_name":"Kundisch, Dennis","first_name":"Dennis","last_name":"Kundisch","id":"21117"},{"full_name":"Wünderlich, Nancy","first_name":"Nancy","last_name":"Wünderlich","id":"36392"}],"publication_identifier":{"issn":["507-532"]},"year":"2021","title":"Transforming into a Platform Provider: Strategic Options for Industrial Smart Service Providers","department":[{"_id":"276"},{"_id":"181"}],"keyword":["Smart service","Platform","Interdisciplinary research","Manufacturing company","Smart service provider","Platform economics","Information systems","Multi-sided markets","Business-to-business (B2B) markets"],"type":"journal_article","date_created":"2020-08-12T12:12:36Z","abstract":[{"text":"Purpose\r\nThe purpose of this paper is to identify strategic options and challenges that arise when an industrial firm moves from providing smart service toward providing a platform.\r\n\r\nDesign/methodology/approach\r\nThis conceptual study takes on a multidisciplinary research perspective that integrates concepts, theories and insights from service management and marketing, information systems and platform economics.\r\n\r\nFindings\r\nThe paper outlines three platform types – smart data platform, smart product platform and matching platform – as strategic options for firms that wish to evolve from smart service providers to platform providers.\r\n\r\nResearch limitations/implications\r\nInvestigating smart service platforms calls for launching interdisciplinary research initiatives. Promising research avenues are outlined to span boundaries that separate different research disciplines today.\r\n\r\nPractical implications\r\nManaging a successful transition from providing smart service toward providing a platform requires making significant investments in IT, platform-related capabilities and skills, as well as implement new approaches toward relationship management and brand-building.\r\n\r\nOriginality/value\r\nThe findings described in this paper are valuable to researchers in multiple disciplines seeking to develop and to justify theory related to platforms in industrial scenarios.","lang":"eng"}],"publication":"Journal of Service Management","issue":"4","volume":32,"user_id":"59677","ddc":["380"],"_id":"17860","publisher":"Emerald Insight","page":"507-532","status":"public","project":[{"name":"SFB 901","_id":"1","grant_number":"160364472"},{"_id":"4","name":"SFB 901 - Project Area C"},{"_id":"17","name":"SFB 901 - Subproject C5"}],"quality_controlled":"1","citation":{"ieee":"D. Beverungen, D. Kundisch, and N. Wünderlich, “Transforming into a Platform Provider: Strategic Options for Industrial Smart Service Providers,” Journal of Service Management, vol. 32, no. 4, pp. 507–532, 2021, doi: 10.1108/JOSM-03-2020-0066.","mla":"Beverungen, Daniel, et al. “Transforming into a Platform Provider: Strategic Options for Industrial Smart Service Providers.” Journal of Service Management, vol. 32, no. 4, Emerald Insight, 2021, pp. 507–32, doi:10.1108/JOSM-03-2020-0066.","apa":"Beverungen, D., Kundisch, D., & Wünderlich, N. (2021). Transforming into a Platform Provider: Strategic Options for Industrial Smart Service Providers. Journal of Service Management, 32(4), 507–532. https://doi.org/10.1108/JOSM-03-2020-0066","bibtex":"@article{Beverungen_Kundisch_Wünderlich_2021, title={Transforming into a Platform Provider: Strategic Options for Industrial Smart Service Providers}, volume={32}, DOI={10.1108/JOSM-03-2020-0066}, number={4}, journal={Journal of Service Management}, publisher={Emerald Insight}, author={Beverungen, Daniel and Kundisch, Dennis and Wünderlich, Nancy}, year={2021}, pages={507–532} }","chicago":"Beverungen, Daniel, Dennis Kundisch, and Nancy Wünderlich. “Transforming into a Platform Provider: Strategic Options for Industrial Smart Service Providers.” Journal of Service Management 32, no. 4 (2021): 507–32. https://doi.org/10.1108/JOSM-03-2020-0066.","short":"D. Beverungen, D. Kundisch, N. Wünderlich, Journal of Service Management 32 (2021) 507–532.","ama":"Beverungen D, Kundisch D, Wünderlich N. Transforming into a Platform Provider: Strategic Options for Industrial Smart Service Providers. Journal of Service Management. 2021;32(4):507-532. doi:10.1108/JOSM-03-2020-0066"}},{"date_updated":"2023-01-18T10:18:54Z","title":"Regulating Transitions from School to Work. An Institutional Ethnography of Activation Work in Action","year":"2021","status":"public","author":[{"last_name":"Dahmen","first_name":"Stephan","full_name":"Dahmen, Stephan","id":"95659"}],"doi":"10.14361/9783839457061","user_id":"48187","page":"312","_id":"37274","publisher":"Bielefeld University Press","language":[{"iso":"eng"}],"abstract":[{"lang":"eng","text":"How are activation programs for the young unemployed implemented? How do street-level bureaucrats deal with competing rationalities and demands for action? Transition policies increasingly aim at promoting self-regulation and constructing employable subjects. Stephan Dahmen explores the practical regulation of biographical transitions in activation programs for the young unemployed by focusing on the interactive accomplishment of activation work. The study reveals how the critical tensions of activation policies are continually re-interpreted and adapted to local contingencies and describes the various organisational technologies used for creating employable subjects."}],"citation":{"chicago":"Dahmen, Stephan. Regulating Transitions from School to Work. An Institutional Ethnography of Activation Work in Action. Bielefeld University Press, 2021. https://doi.org/10.14361/9783839457061.","short":"S. Dahmen, Regulating Transitions from School to Work. An Institutional Ethnography of Activation Work in Action, Bielefeld University Press, 2021.","apa":"Dahmen, S. (2021). Regulating Transitions from School to Work. An Institutional Ethnography of Activation Work in Action. Bielefeld University Press. https://doi.org/10.14361/9783839457061","ieee":"S. Dahmen, Regulating Transitions from School to Work. An Institutional Ethnography of Activation Work in Action. Bielefeld University Press, 2021.","ama":"Dahmen S. Regulating Transitions from School to Work. An Institutional Ethnography of Activation Work in Action. Bielefeld University Press; 2021. doi:10.14361/9783839457061","bibtex":"@book{Dahmen_2021, title={Regulating Transitions from School to Work. An Institutional Ethnography of Activation Work in Action}, DOI={10.14361/9783839457061}, publisher={Bielefeld University Press}, author={Dahmen, Stephan}, year={2021} }","mla":"Dahmen, Stephan. Regulating Transitions from School to Work. An Institutional Ethnography of Activation Work in Action. Bielefeld University Press, 2021, doi:10.14361/9783839457061."},"keyword":["Youth","Welfare State","Transitions","Human Service Organizations","Institutional Ethnography","Activation","Sociology of Conventions","Work","Education","Educational Research","Sociology of Education","Social Pedagogy","History of Education","Bielefeld University Press"],"type":"book","department":[{"_id":"723"},{"_id":"724"},{"_id":"36"}],"date_created":"2023-01-18T10:18:09Z"},{"abstract":[{"lang":"eng","text":"How are activation programs for the young unemployed implemented? How do street-level bureaucrats deal with competing rationalities and demands for action? Transition policies increasingly aim at promoting self-regulation and constructing employable subjects. Stephan Dahmen explores the practical regulation of biographical transitions in activation programs for the young unemployed by focusing on the interactive accomplishment of activation work. The study reveals how the critical tensions of activation policies are continually re-interpreted and adapted to local contingencies and describes the various organisational technologies used for creating employable subjects."}],"citation":{"apa":"Dahmen, S. (2021). Regulating Transitions from School to Work. An Institutional Ethnography of Activation Work in Action. Bielefeld University Press. https://doi.org/10.14361/9783839457061","ieee":"S. Dahmen, Regulating Transitions from School to Work. An Institutional Ethnography of Activation Work in Action. Bielefeld University Press, 2021.","chicago":"Dahmen, Stephan. Regulating Transitions from School to Work. An Institutional Ethnography of Activation Work in Action. Bielefeld University Press, 2021. https://doi.org/10.14361/9783839457061.","short":"S. Dahmen, Regulating Transitions from School to Work. An Institutional Ethnography of Activation Work in Action, Bielefeld University Press, 2021.","mla":"Dahmen, Stephan. Regulating Transitions from School to Work. An Institutional Ethnography of Activation Work in Action. Bielefeld University Press, 2021, doi:10.14361/9783839457061.","ama":"Dahmen S. Regulating Transitions from School to Work. An Institutional Ethnography of Activation Work in Action. Bielefeld University Press; 2021. doi:10.14361/9783839457061","bibtex":"@book{Dahmen_2021, title={Regulating Transitions from School to Work. An Institutional Ethnography of Activation Work in Action}, DOI={10.14361/9783839457061}, publisher={Bielefeld University Press}, author={Dahmen, Stephan}, year={2021} }"},"department":[{"_id":"723"},{"_id":"724"}],"keyword":["Youth","Welfare State","Transitions","Human Service Organizations","Institutional Ethnography","Activation","Sociology of Conventions","Work","Education","Educational Research","Sociology of Education","Social Pedagogy","History of Education","Bielefeld University Press"],"type":"book","date_created":"2023-01-18T10:14:30Z","date_updated":"2023-01-18T10:16:56Z","author":[{"full_name":"Dahmen, Stephan","last_name":"Dahmen","first_name":"Stephan"}],"title":"Regulating Transitions from School to Work. An Institutional Ethnography of Activation Work in Action","year":"2021","status":"public","doi":"10.14361/9783839457061","user_id":"48187","language":[{"iso":"eng"}],"_id":"37273","publisher":"Bielefeld University Press","page":"312"},{"conference":{"location":"Tutzing","name":"Symposium Design for X (DFX2021)","start_date":"27-09-2021","end_date":"28-09-2021"},"author":[{"full_name":"Gräßler, Iris","first_name":"Iris","last_name":"Gräßler","orcid":"0000-0001-5765-971X","id":"47565"},{"first_name":"Dominik","last_name":"Wiechel","full_name":"Wiechel, Dominik","id":"67161"}],"title":"Systematische Bewertung von Auswirkungsanalysen des Engineering Change Managements","year":"2021","status":"public","date_updated":"2023-05-09T18:22:30Z","publication_status":"published","language":[{"iso":"eng"}],"_id":"24280","editor":[{"last_name":"Krause","first_name":"Dieter","full_name":"Krause, Dieter"},{"first_name":"Kristin","last_name":"Paetzold","full_name":"Paetzold, Kristin"},{"full_name":"Wartzack, Sandro","first_name":"Sandro","last_name":"Wartzack"}],"doi":"10.35199/dfx2021.12","user_id":"67161","citation":{"bibtex":"@inproceedings{Gräßler_Wiechel_2021, title={Systematische Bewertung von Auswirkungsanalysen des Engineering Change Managements}, DOI={10.35199/dfx2021.12}, booktitle={DS 111: Proceedings of the 32nd Symposium Design for X}, author={Gräßler, Iris and Wiechel, Dominik}, editor={Krause, Dieter and Paetzold, Kristin and Wartzack, Sandro}, year={2021} }","short":"I. Gräßler, D. Wiechel, in: D. Krause, K. Paetzold, S. Wartzack (Eds.), DS 111: Proceedings of the 32nd Symposium Design for X, 2021.","ama":"Gräßler I, Wiechel D. Systematische Bewertung von Auswirkungsanalysen des Engineering Change Managements. In: Krause D, Paetzold K, Wartzack S, eds. DS 111: Proceedings of the 32nd Symposium Design for X. ; 2021. doi:10.35199/dfx2021.12","chicago":"Gräßler, Iris, and Dominik Wiechel. “Systematische Bewertung von Auswirkungsanalysen Des Engineering Change Managements.” In DS 111: Proceedings of the 32nd Symposium Design for X, edited by Dieter Krause, Kristin Paetzold, and Sandro Wartzack, 2021. https://doi.org/10.35199/dfx2021.12.","ieee":"I. Gräßler and D. Wiechel, “Systematische Bewertung von Auswirkungsanalysen des Engineering Change Managements,” in DS 111: Proceedings of the 32nd Symposium Design for X, Tutzing, 2021, doi: 10.35199/dfx2021.12.","mla":"Gräßler, Iris, and Dominik Wiechel. “Systematische Bewertung von Auswirkungsanalysen Des Engineering Change Managements.” DS 111: Proceedings of the 32nd Symposium Design for X, edited by Dieter Krause et al., 2021, doi:10.35199/dfx2021.12.","apa":"Gräßler, I., & Wiechel, D. (2021). Systematische Bewertung von Auswirkungsanalysen des Engineering Change Managements. In D. Krause, K. Paetzold, & S. Wartzack (Eds.), DS 111: Proceedings of the 32nd Symposium Design for X. https://doi.org/10.35199/dfx2021.12"},"publication":"DS 111: Proceedings of the 32nd Symposium Design for X","abstract":[{"text":"Challenges in decisions on technical changes are the lack of knowledge about the expected impact and change propagation. Currently, no literature study contains a systematic differentiation and evaluation of existing approaches, which is a prerequisite for practitioners to select a suitable approach. This research aims at defining differentiation criteria as well as generally applicable requirements for evaluation. A four-step approach is used: systematic literature review on approaches for impact analysis of engineering changes (1), categorization and prioritization of approaches based on reoccuring elements (2), derivation of context specific requirements for evaluation (3), and evaluation of approaches (4). The result indicates existing potential of object-oriented modeling approaches.","lang":"eng"}],"quality_controlled":"1","date_created":"2021-09-13T14:45:10Z","department":[{"_id":"152"}],"type":"conference","keyword":["Engineering Change Management","Impact Analysis","Engineering Changes","Model-based Systems Engineering","Product Developmen"]},{"abstract":[{"lang":"eng","text":"Self-piercing riveting is an established technique for joining multi-material structures in car body manufacturing. Rivets for self-piercing riveting differ in their geometry, the material used, the condition of the material and their surface condition. To shorten the manufacturing process by omitting the heat treatment and the coating process, the authors have elaborated a concept for the use of stainless steel with high strain hardening as a rivet material. The focus of the present investigation is on the evaluation of the influences of the rivet’s geometry and material on its deformation behaviour. Conventional rivets of types P and HD2, a rivet with an improved geometry made of treatable steel 38B2, and rivets made of the stainless steels 1.3815 and 1.4541 are examined. The analysis is conducted by means of multi-step joining tests for two material combinations comprising high-strength steel HCT70X and aluminium EN AW-5083. The joints are cut to provide a cross-section and the deformation behaviour of the different rivets is analysed on the basis of the measured changes in geometry and hardness. In parallel, an examination of the force-stroke curves provides further insights. It can be demonstrated that, besides the geometry, the material strength, in particular, has a significant influence on the deformation behaviour of the rivet. The strength of steel 1.4541 is seen to be too low for the joining task, while the strength of steel 1.3815 is sufficient, and hence the investigation confirms the capability of rivets made of 1.3815 for joining even challenging material combinations."}],"publication":"Forming the Future - Proceedings of the 13th International Conference on the Technology of Plasticity. The Minerals, Metals & Materials Series.","department":[{"_id":"157"}],"keyword":["Self-piercing riveting","Lightweight design","Deformation behaviour","Stainless steel","High nitrogen steel"],"type":"book_chapter","date_created":"2021-08-04T14:02:32Z","publication_status":"published","date_updated":"2026-02-27T10:40:39Z","author":[{"id":"38131","first_name":"Benedikt","last_name":"Uhe","full_name":"Uhe, Benedikt"},{"first_name":"Clara-Maria","last_name":"Kuball","full_name":"Kuball, Clara-Maria"},{"first_name":"Marion","last_name":"Merklein","full_name":"Merklein, Marion"},{"id":"32056","first_name":"Gerson","orcid":"0000-0002-2763-1246","last_name":"Meschut","full_name":"Meschut, Gerson"}],"title":"Self-Piercing Riveting Using Rivets Made of Stainless Steel with High Strain Hardening","year":"2021","doi":"10.1007/978-3-030-75381-8_124","language":[{"iso":"eng"}],"quality_controlled":"1","citation":{"chicago":"Uhe, Benedikt, Clara-Maria Kuball, Marion Merklein, and Gerson Meschut. “Self-Piercing Riveting Using Rivets Made of Stainless Steel with High Strain Hardening.” In Forming the Future - Proceedings of the 13th International Conference on the Technology of Plasticity. The Minerals, Metals & Materials Series., edited by Glenn Daehn, Jian Cao, Brad Kinsey, Erman Tekkaya, Anupam Vivek, and Yoshinori Yoshida, 1495–1506. Cham: Springer, 2021. https://doi.org/10.1007/978-3-030-75381-8_124.","short":"B. Uhe, C.-M. Kuball, M. Merklein, G. Meschut, in: G. Daehn, J. Cao, B. Kinsey, E. Tekkaya, A. Vivek, Y. Yoshida (Eds.), Forming the Future - Proceedings of the 13th International Conference on the Technology of Plasticity. The Minerals, Metals & Materials Series., Springer, Cham, 2021, pp. 1495–1506.","ieee":"B. Uhe, C.-M. Kuball, M. Merklein, and G. Meschut, “Self-Piercing Riveting Using Rivets Made of Stainless Steel with High Strain Hardening,” in Forming the Future - Proceedings of the 13th International Conference on the Technology of Plasticity. The Minerals, Metals & Materials Series., G. Daehn, J. Cao, B. Kinsey, E. Tekkaya, A. Vivek, and Y. Yoshida, Eds. Cham: Springer, 2021, pp. 1495–1506.","apa":"Uhe, B., Kuball, C.-M., Merklein, M., & Meschut, G. (2021). Self-Piercing Riveting Using Rivets Made of Stainless Steel with High Strain Hardening. In G. Daehn, J. Cao, B. Kinsey, E. Tekkaya, A. Vivek, & Y. Yoshida (Eds.), Forming the Future - Proceedings of the 13th International Conference on the Technology of Plasticity. The Minerals, Metals & Materials Series. (pp. 1495–1506). Springer. https://doi.org/10.1007/978-3-030-75381-8_124","bibtex":"@inbook{Uhe_Kuball_Merklein_Meschut_2021, place={Cham}, title={Self-Piercing Riveting Using Rivets Made of Stainless Steel with High Strain Hardening}, DOI={10.1007/978-3-030-75381-8_124}, booktitle={Forming the Future - Proceedings of the 13th International Conference on the Technology of Plasticity. The Minerals, Metals & Materials Series.}, publisher={Springer}, author={Uhe, Benedikt and Kuball, Clara-Maria and Merklein, Marion and Meschut, Gerson}, editor={Daehn, Glenn and Cao, Jian and Kinsey, Brad and Tekkaya, Erman and Vivek, Anupam and Yoshida, Yoshinori}, year={2021}, pages={1495–1506} }","ama":"Uhe B, Kuball C-M, Merklein M, Meschut G. Self-Piercing Riveting Using Rivets Made of Stainless Steel with High Strain Hardening. In: Daehn G, Cao J, Kinsey B, Tekkaya E, Vivek A, Yoshida Y, eds. Forming the Future - Proceedings of the 13th International Conference on the Technology of Plasticity. The Minerals, Metals & Materials Series. Springer; 2021:1495-1506. doi:10.1007/978-3-030-75381-8_124","mla":"Uhe, Benedikt, et al. “Self-Piercing Riveting Using Rivets Made of Stainless Steel with High Strain Hardening.” Forming the Future - Proceedings of the 13th International Conference on the Technology of Plasticity. The Minerals, Metals & Materials Series., edited by Glenn Daehn et al., Springer, 2021, pp. 1495–506, doi:10.1007/978-3-030-75381-8_124."},"place":"Cham","status":"public","editor":[{"last_name":"Daehn","first_name":"Glenn","full_name":"Daehn, Glenn"},{"full_name":"Cao, Jian","last_name":"Cao","first_name":"Jian"},{"full_name":"Kinsey, Brad","last_name":"Kinsey","first_name":"Brad"},{"last_name":"Tekkaya","first_name":"Erman","full_name":"Tekkaya, Erman"},{"full_name":"Vivek, Anupam","first_name":"Anupam","last_name":"Vivek"},{"full_name":"Yoshida, Yoshinori","last_name":"Yoshida","first_name":"Yoshinori"}],"user_id":"53912","publisher":"Springer","_id":"22930","page":"1495-1506"},{"project":[{"name":"KnowGraphs: KnowGraphs: Knowledge Graphs at Scale","_id":"410"}],"citation":{"apa":"Qudus, U., Saleem, M., Ngonga Ngomo, A.-C., & Lee, Y.-K. (n.d.). An Empirical Evaluation of Cost-based Federated SPARQL Query Processing Engines. Semantic Web, 12(6), 843–868. https://doi.org/10.3233/SW-200420","ieee":"U. Qudus, M. Saleem, A.-C. Ngonga Ngomo, and Y.-K. Lee, “An Empirical Evaluation of Cost-based Federated SPARQL Query Processing Engines,” Semantic Web, vol. 12, no. 6, pp. 843–868, doi: 10.3233/SW-200420.","chicago":"Qudus, Umair, Muhammad Saleem, Axel-Cyrille Ngonga Ngomo, and Young-Koo Lee. “An Empirical Evaluation of Cost-Based Federated SPARQL Query Processing Engines.” Semantic Web 12, no. 6 (n.d.): 843–68. https://doi.org/10.3233/SW-200420.","short":"U. Qudus, M. Saleem, A.-C. Ngonga Ngomo, Y.-K. Lee, Semantic Web 12 (n.d.) 843–868.","mla":"Qudus, Umair, et al. “An Empirical Evaluation of Cost-Based Federated SPARQL Query Processing Engines.” Semantic Web, vol. 12, no. 6, ISO Press, pp. 843–68, doi:10.3233/SW-200420.","ama":"Qudus U, Saleem M, Ngonga Ngomo A-C, Lee Y-K. An Empirical Evaluation of Cost-based Federated SPARQL Query Processing Engines. Semantic Web. 12(6):843-868. doi:10.3233/SW-200420","bibtex":"@article{Qudus_Saleem_Ngonga Ngomo_Lee, title={An Empirical Evaluation of Cost-based Federated SPARQL Query Processing Engines}, volume={12}, DOI={10.3233/SW-200420}, number={6}, journal={Semantic Web}, publisher={ISO Press}, author={Qudus, Umair and Saleem, Muhammad and Ngonga Ngomo, Axel-Cyrille and Lee, Young-Koo}, pages={843–868} }"},"file_date_updated":"2024-01-13T11:35:53Z","volume":12,"user_id":"83392","ddc":["000"],"publisher":"ISO Press","_id":"25212","page":"843-868","has_accepted_license":"1","status":"public","department":[{"_id":"574"}],"keyword":["SPARQL","benchmarking","cost-based","cost-free","federated","querying"],"type":"journal_article","date_created":"2021-10-01T06:52:52Z","file":[{"creator":"uqudus","date_created":"2024-01-13T11:35:53Z","date_updated":"2024-01-13T11:35:53Z","relation":"main_file","file_size":978478,"access_level":"closed","file_name":"swj2604.pdf","content_type":"application/pdf","success":1,"file_id":"50483"}],"abstract":[{"text":"Finding a good query plan is key to the optimization of query runtime. This holds in particular for cost-based federation\r\nengines, which make use of cardinality estimations to achieve this goal. A number of studies compare SPARQL federation engines across different performance metrics, including query runtime, result set completeness and correctness, number of sources selected and number of requests sent. Albeit informative, these metrics are generic and unable to quantify and evaluate the accuracy of the cardinality estimators of cost-based federation engines. To thoroughly evaluate cost-based federation engines, the effect of estimated cardinality errors on the overall query runtime performance must be measured. In this paper, we address this challenge by presenting novel evaluation metrics targeted at a fine-grained benchmarking of cost-based federated SPARQL query engines. We evaluate five cost-based federated SPARQL query engines using existing as well as novel evaluation metrics by using LargeRDFBench queries. Our results provide a detailed analysis of the experimental outcomes that reveal novel insights, useful for the development of future cost-based federated SPARQL query processing engines.","lang":"eng"}],"publication":"Semantic Web","issue":"6","doi":"10.3233/SW-200420","language":[{"iso":"eng"}],"article_type":"original","intvolume":" 12","publication_status":"accepted","date_updated":"2025-09-11T09:50:14Z","publication_identifier":{"issn":["2210-4968"]},"author":[{"id":"83392","full_name":"Qudus, Umair","first_name":"Umair","orcid":"0000-0001-6714-8729","last_name":"Qudus"},{"first_name":"Muhammad","last_name":"Saleem","full_name":"Saleem, Muhammad"},{"id":"65716","first_name":"Axel-Cyrille","last_name":"Ngonga Ngomo","full_name":"Ngonga Ngomo, Axel-Cyrille"},{"last_name":"Lee","first_name":"Young-Koo","full_name":"Lee, Young-Koo"}],"title":"An Empirical Evaluation of Cost-based Federated SPARQL Query Processing Engines","year":"2021"},{"publication":"Human-Centered Software Engineering. HCSE 2020","abstract":[{"lang":"eng","text":"Mobile shopping apps have been using Augmented Reality (AR) in the last years to place their products in the environment of the customer. While this is possible with atomic 3D objects, there is is still a lack in the runtime configuration of 3D object compositions based on user needs and environmental constraints. For this, we previously developed an approach for model-based AR-assisted product configuration based on the concept of Dynamic Software Product Lines. In this demonstration paper, we present the corresponding tool support ProConAR in the form of a Product Modeler and a Product Configurator. While the Product Modeler is an Angular web app that splits products (e.g. table) up into atomic parts (e.g. tabletop, table legs, funnier) and saves it within a configuration model, the Product Configurator is an Android client that uses the configuration model to place different product configurations within the environment of the customer. We show technical details of our ready to use tool-chain ProConAR by describing its implementation and usage as well as pointing out future research directions."}],"file":[{"relation":"main_file","date_updated":"2020-11-30T08:39:18Z","file_name":"HCSE20_demo.pdf","access_level":"open_access","file_size":3913885,"file_id":"20542","content_type":"application/pdf","creator":"sego","date_created":"2020-11-30T08:39:18Z"}],"date_created":"2020-09-21T17:01:11Z","type":"conference","keyword":["Product Configuration","Augmented Reality","Model-based","Tool Support"],"department":[{"_id":"66"},{"_id":"534"}],"year":"2020","title":"ProConAR: A Tool Support for Model-based AR Product Configuration","author":[{"full_name":"Gottschalk, Sebastian","last_name":"Gottschalk","first_name":"Sebastian","id":"47208"},{"id":"8447","orcid":"0000-0002-5967-833X","first_name":"Enes","last_name":"Yigitbas","full_name":"Yigitbas, Enes"},{"full_name":"Schmidt, Eugen","first_name":"Eugen","last_name":"Schmidt"},{"full_name":"Engels, Gregor","first_name":"Gregor","last_name":"Engels","id":"107"}],"date_updated":"2022-01-06T06:54:07Z","intvolume":" 12481","series_title":"Lecture Notes in Computer Science","language":[{"iso":"eng"}],"doi":"10.1007/978-3-030-64266-2_14","file_date_updated":"2020-11-30T08:39:18Z","citation":{"chicago":"Gottschalk, Sebastian, Enes Yigitbas, Eugen Schmidt, and Gregor Engels. “ProConAR: A Tool Support for Model-Based AR Product Configuration.” In Human-Centered Software Engineering. HCSE 2020, edited by Regina Bernhaupt, Carmelo Ardito, and Stefan Sauer, Vol. 12481. Lecture Notes in Computer Science. Cham: Springer, 2020. https://doi.org/10.1007/978-3-030-64266-2_14.","ama":"Gottschalk S, Yigitbas E, Schmidt E, Engels G. ProConAR: A Tool Support for Model-based AR Product Configuration. In: Bernhaupt R, Ardito C, Sauer S, eds. Human-Centered Software Engineering. HCSE 2020. Vol 12481. Lecture Notes in Computer Science. Cham: Springer; 2020. doi:10.1007/978-3-030-64266-2_14","short":"S. Gottschalk, E. Yigitbas, E. Schmidt, G. Engels, in: R. Bernhaupt, C. Ardito, S. Sauer (Eds.), Human-Centered Software Engineering. HCSE 2020, Springer, Cham, 2020.","bibtex":"@inproceedings{Gottschalk_Yigitbas_Schmidt_Engels_2020, place={Cham}, series={Lecture Notes in Computer Science}, title={ProConAR: A Tool Support for Model-based AR Product Configuration}, volume={12481}, DOI={10.1007/978-3-030-64266-2_14}, booktitle={Human-Centered Software Engineering. HCSE 2020}, publisher={Springer}, author={Gottschalk, Sebastian and Yigitbas, Enes and Schmidt, Eugen and Engels, Gregor}, editor={Bernhaupt, Regina and Ardito, Carmelo and Sauer, StefanEditors}, year={2020}, collection={Lecture Notes in Computer Science} }","apa":"Gottschalk, S., Yigitbas, E., Schmidt, E., & Engels, G. (2020). ProConAR: A Tool Support for Model-based AR Product Configuration. In R. Bernhaupt, C. Ardito, & S. Sauer (Eds.), Human-Centered Software Engineering. HCSE 2020 (Vol. 12481). Cham: Springer. https://doi.org/10.1007/978-3-030-64266-2_14","mla":"Gottschalk, Sebastian, et al. “ProConAR: A Tool Support for Model-Based AR Product Configuration.” Human-Centered Software Engineering. HCSE 2020, edited by Regina Bernhaupt et al., vol. 12481, Springer, 2020, doi:10.1007/978-3-030-64266-2_14.","ieee":"S. Gottschalk, E. Yigitbas, E. Schmidt, and G. Engels, “ProConAR: A Tool Support for Model-based AR Product Configuration,” in Human-Centered Software Engineering. HCSE 2020, Eindhoven, 2020, vol. 12481."},"project":[{"_id":"1","name":"SFB 901"},{"name":"SFB 901 - Project Area C","_id":"4"},{"_id":"17","name":"SFB 901 - Subproject C5"}],"place":"Cham","oa":"1","status":"public","conference":{"end_date":"2020-12-02","start_date":"2020-11-30","name":"8th International Working Conference on Human-Centered Software Engineering (HCSE'20)","location":"Eindhoven"},"has_accepted_license":"1","_id":"19606","publisher":"Springer","ddc":["000"],"user_id":"47208","editor":[{"last_name":"Bernhaupt","first_name":"Regina","full_name":"Bernhaupt, Regina"},{"first_name":"Carmelo","last_name":"Ardito","full_name":"Ardito, Carmelo"},{"first_name":"Stefan","last_name":"Sauer","full_name":"Sauer, Stefan"}],"volume":12481},{"user_id":"38240","edition":"1","_id":"21542","publisher":" The Institution of Engineering and Technology (IET)","page":"315-346 (32)","status":"public","place":"Croyton, UK","project":[{"name":"Computing Resources Provided by the Paderborn Center for Parallel Computing","_id":"52"}],"citation":{"short":"D. Schröder, S. Lange, C. Hangmann, C. Hedayat, in: Tensorial Analysis of Networks (TAN) Modelling for PCB Signal Integrity and EMC Analysis, 1st ed., The Institution of Engineering and Technology (IET), Croyton, UK, 2020, pp. 315-346 (32).","ama":"Schröder D, Lange S, Hangmann C, Hedayat C. Far-field prediction combining simulations with near-field measurements for EMI assessment of PCBs. In: Tensorial Analysis of Networks (TAN) Modelling for PCB Signal Integrity and EMC Analysis. 1st ed. Croyton, UK: The Institution of Engineering and Technology (IET); 2020:315-346 (32). doi:10.1049/pbcs072e_ch14","chicago":"Schröder, Dominik, Sven Lange, Christian Hangmann, and Christian Hedayat. “Far-Field Prediction Combining Simulations with near-Field Measurements for EMI Assessment of PCBs.” In Tensorial Analysis of Networks (TAN) Modelling for PCB Signal Integrity and EMC Analysis, 1st ed., 315-346 (32). Croyton, UK: The Institution of Engineering and Technology (IET), 2020. https://doi.org/10.1049/pbcs072e_ch14.","bibtex":"@inbook{Schröder_Lange_Hangmann_Hedayat_2020, place={Croyton, UK}, edition={1}, title={Far-field prediction combining simulations with near-field measurements for EMI assessment of PCBs}, DOI={10.1049/pbcs072e_ch14}, booktitle={Tensorial Analysis of Networks (TAN) Modelling for PCB Signal Integrity and EMC Analysis}, publisher={ The Institution of Engineering and Technology (IET)}, author={Schröder, Dominik and Lange, Sven and Hangmann, Christian and Hedayat, Christian}, year={2020}, pages={315-346 (32)} }","mla":"Schröder, Dominik, et al. “Far-Field Prediction Combining Simulations with near-Field Measurements for EMI Assessment of PCBs.” Tensorial Analysis of Networks (TAN) Modelling for PCB Signal Integrity and EMC Analysis, 1st ed., The Institution of Engineering and Technology (IET), 2020, pp. 315-346 (32), doi:10.1049/pbcs072e_ch14.","apa":"Schröder, D., Lange, S., Hangmann, C., & Hedayat, C. (2020). Far-field prediction combining simulations with near-field measurements for EMI assessment of PCBs. In Tensorial Analysis of Networks (TAN) Modelling for PCB Signal Integrity and EMC Analysis (1st ed., pp. 315-346 (32)). Croyton, UK: The Institution of Engineering and Technology (IET). https://doi.org/10.1049/pbcs072e_ch14","ieee":"D. Schröder, S. Lange, C. Hangmann, and C. Hedayat, “Far-field prediction combining simulations with near-field measurements for EMI assessment of PCBs,” in Tensorial Analysis of Networks (TAN) Modelling for PCB Signal Integrity and EMC Analysis, 1st ed., Croyton, UK: The Institution of Engineering and Technology (IET), 2020, pp. 315-346 (32)."},"doi":"10.1049/pbcs072e_ch14","language":[{"iso":"eng"}],"main_file_link":[{"url":"https://digital-library.theiet.org/content/books/10.1049/pbcs072e_ch14"}],"date_updated":"2022-01-06T06:55:03Z","publication_status":"published","author":[{"full_name":"Schröder, Dominik","last_name":"Schröder","first_name":"Dominik"},{"full_name":"Lange, Sven","last_name":"Lange","first_name":"Sven","id":"38240"},{"full_name":"Hangmann, Christian","last_name":"Hangmann","first_name":"Christian"},{"full_name":"Hedayat, Christian","first_name":"Christian","last_name":"Hedayat"}],"publication_identifier":{"isbn":["9781839530494","9781839530500"]},"year":"2020","title":"Far-field prediction combining simulations with near-field measurements for EMI assessment of PCBs","department":[{"_id":"485"}],"type":"book_chapter","keyword":["Huygens' box","NF-to-FF transformation","efficient FF radiation model","FF behaviour","EMI assessment","PCB","near-field measurements","efficient radiation model","far-field behaviour","RF design process","far-field prediction","Huygens'box principle","fullwave simulation","electronic system radiation","equivalent radiation source","electromagnetic simulation tool","near-field scan data","EM compatibility failure reduction"],"date_created":"2021-03-18T13:49:49Z","abstract":[{"lang":"eng","text":"Using near-field (NF) scan data to predict the far-field (FF) behaviour of radiating electronic systems represents a novel method to accompany the whole RF design process. This approach involves so-called Huygens' box as an efficient radiation model inside an electromagnetic (EM) simulation tool and then transforms the scanned NF measured data into the FF. For this, the basic idea of the Huygens'box principle and the NF-to-FF transformation are briefly presented. The NF is measured on the Huygens' box around a device under test using anNF scanner, recording the magnitude and phase of the site-related magnetic and electric components. A comparison between a fullwave simulation and the measurement results shows a good similarity in both the NF and the simulated and transformed FF.Thus, this method is applicable to predict the FF behaviour of any electronic system by measuring the NF. With this knowledge, the RF design can be improved due to allowing a significant reduction of EM compatibility failure at the end of the development flow. In addition, the very efficient FF radiation model can be used for detailed investigations in various environments and the impact of such an equivalent radiation source on other electronic systems can be assessed."}],"related_material":{"record":[{"status":"public","id":"21542","relation":"other"}]},"publication":"Tensorial Analysis of Networks (TAN) Modelling for PCB Signal Integrity and EMC Analysis"},{"page":"276-286","_id":"16934","publisher":"Springer International Publishing","ddc":["006"],"user_id":"47208","editor":[{"last_name":"Shishkov","first_name":"Boris","full_name":"Shishkov, Boris"}],"volume":391,"status":"public","conference":{"start_date":"2020-07-06","name":"10th International Symposium on Business Modeling and Software Design ","location":"Potsdam","end_date":"2020-07-08"},"has_accepted_license":"1","oa":"1","file_date_updated":"2020-07-14T09:28:33Z","citation":{"mla":"Gottschalk, Sebastian, et al. “Model-Based Hypothesis Engineering for Supporting Adaptation to Uncertain Customer Needs.” Business Modeling and Software Design, edited by Boris Shishkov, vol. 391, Springer International Publishing, 2020, pp. 276–86, doi:10.1007/978-3-030-52306-0_18.","bibtex":"@inproceedings{Gottschalk_Yigitbas_Engels_2020, series={Lecture Notes in Business Information Processing}, title={Model-based Hypothesis Engineering for Supporting Adaptation to Uncertain Customer Needs}, volume={391}, DOI={10.1007/978-3-030-52306-0_18}, booktitle={Business Modeling and Software Design}, publisher={Springer International Publishing}, author={Gottschalk, Sebastian and Yigitbas, Enes and Engels, Gregor}, editor={Shishkov, BorisEditor}, year={2020}, pages={276–286}, collection={Lecture Notes in Business Information Processing} }","ama":"Gottschalk S, Yigitbas E, Engels G. Model-based Hypothesis Engineering for Supporting Adaptation to Uncertain Customer Needs. In: Shishkov B, ed. Business Modeling and Software Design. Vol 391. Lecture Notes in Business Information Processing. Springer International Publishing; 2020:276-286. doi:10.1007/978-3-030-52306-0_18","ieee":"S. Gottschalk, E. Yigitbas, and G. Engels, “Model-based Hypothesis Engineering for Supporting Adaptation to Uncertain Customer Needs,” in Business Modeling and Software Design, Potsdam, 2020, vol. 391, pp. 276–286.","apa":"Gottschalk, S., Yigitbas, E., & Engels, G. (2020). Model-based Hypothesis Engineering for Supporting Adaptation to Uncertain Customer Needs. In B. Shishkov (Ed.), Business Modeling and Software Design (Vol. 391, pp. 276–286). Potsdam: Springer International Publishing. https://doi.org/10.1007/978-3-030-52306-0_18","short":"S. Gottschalk, E. Yigitbas, G. Engels, in: B. Shishkov (Ed.), Business Modeling and Software Design, Springer International Publishing, 2020, pp. 276–286.","chicago":"Gottschalk, Sebastian, Enes Yigitbas, and Gregor Engels. “Model-Based Hypothesis Engineering for Supporting Adaptation to Uncertain Customer Needs.” In Business Modeling and Software Design, edited by Boris Shishkov, 391:276–86. Lecture Notes in Business Information Processing. Springer International Publishing, 2020. https://doi.org/10.1007/978-3-030-52306-0_18."},"project":[{"name":"SFB 901","_id":"1"},{"_id":"4","name":"SFB 901 - Project Area C"},{"name":"SFB 901 - Subproject C5","_id":"17"}],"series_title":"Lecture Notes in Business Information Processing","language":[{"iso":"eng"}],"doi":"10.1007/978-3-030-52306-0_18","year":"2020","title":"Model-based Hypothesis Engineering for Supporting Adaptation to Uncertain Customer Needs","author":[{"last_name":"Gottschalk","first_name":"Sebastian","full_name":"Gottschalk, Sebastian","id":"47208"},{"full_name":"Yigitbas, Enes","orcid":"0000-0002-5967-833X","last_name":"Yigitbas","first_name":"Enes","id":"8447"},{"full_name":"Engels, Gregor","last_name":"Engels","first_name":"Gregor","id":"107"}],"date_updated":"2022-01-06T06:52:59Z","intvolume":" 391","file":[{"file_id":"17380","content_type":"application/pdf","file_name":"BMSD20.pdf","access_level":"open_access","file_size":267658,"relation":"main_file","date_updated":"2020-07-14T09:28:33Z","date_created":"2020-07-14T09:25:30Z","creator":"sego"}],"date_created":"2020-05-04T12:27:38Z","type":"conference","keyword":["Hypothesis Engineering","Model-based","Customer Need Adaptation","Business Model","Product Features"],"department":[{"_id":"66"}],"publication":"Business Modeling and Software Design","abstract":[{"lang":"eng","text":"To build successful products, the developers have to adapt their product features and business models to uncertain customer needs. This adaptation is part of the research discipline of Hypotheses Engineering (HE) where customer needs can be seen as hypotheses that need to be tested iteratively by conducting experiments together with the customer. So far, modeling support and associated traceability of this iterative process are missing. Both, in turn, are important to document the adaptation to the customer needs and identify experiments that provide most evidence to the customer needs. To target this issue, we introduce a model-based HE approach with a twofold contribution: First, we develop a modeling language that models hypotheses and experiments as interrelated hierarchies together with a mapping between them. While the hypotheses are labeled with a score level of their current evidence, the experiments are labeled with a score level of maximum evidence that can be achieved during conduction. Second, we provide an iterative process to determine experiments that offer the most evidence improvement to the modeled hypotheses. We illustrate the usefulness of the approach with an example of testing the business model of a mobile application."}]},{"_id":"17019","language":[{"iso":"eng"}],"main_file_link":[{"url":"https://ssrn.com/abstract=3581789","open_access":"1"}],"ddc":["000"],"user_id":"61579","author":[{"id":"72850","first_name":"Guido","last_name":"Schryen","full_name":"Schryen, Guido"},{"full_name":"Wagner, Gerit","first_name":"Gerit","last_name":"Wagner"},{"full_name":"Benlian, Alexander","last_name":"Benlian","first_name":"Alexander"}],"title":"Distinguishing Knowledge Impact from Citation Impact: A Methodology for Analysing Knowledge Impact for the Literature Review Genre","status":"public","year":"2020","has_accepted_license":"1","date_updated":"2022-01-06T06:53:02Z","date_created":"2020-05-19T15:12:33Z","file":[{"creator":"hsiemes","date_created":"2020-05-19T15:09:28Z","date_updated":"2020-05-19T15:09:28Z","relation":"main_file","access_level":"open_access","file_size":487351,"file_name":"SSRN-id3581789.pdf","content_type":"application/pdf","file_id":"17020"}],"oa":"1","department":[{"_id":"277"}],"keyword":["Scientific impact","knowledge impact","content-based citation analysis","methodology"],"type":"working_paper","citation":{"bibtex":"@book{Schryen_Wagner_Benlian_2020, title={Distinguishing Knowledge Impact from Citation Impact: A Methodology for Analysing Knowledge Impact for the Literature Review Genre}, author={Schryen, Guido and Wagner, Gerit and Benlian, Alexander}, year={2020} }","ama":"Schryen G, Wagner G, Benlian A. Distinguishing Knowledge Impact from Citation Impact: A Methodology for Analysing Knowledge Impact for the Literature Review Genre.; 2020.","mla":"Schryen, Guido, et al. Distinguishing Knowledge Impact from Citation Impact: A Methodology for Analysing Knowledge Impact for the Literature Review Genre. 2020.","chicago":"Schryen, Guido, Gerit Wagner, and Alexander Benlian. Distinguishing Knowledge Impact from Citation Impact: A Methodology for Analysing Knowledge Impact for the Literature Review Genre, 2020.","short":"G. Schryen, G. Wagner, A. Benlian, Distinguishing Knowledge Impact from Citation Impact: A Methodology for Analysing Knowledge Impact for the Literature Review Genre, 2020.","ieee":"G. Schryen, G. Wagner, and A. Benlian, Distinguishing Knowledge Impact from Citation Impact: A Methodology for Analysing Knowledge Impact for the Literature Review Genre. 2020.","apa":"Schryen, G., Wagner, G., & Benlian, A. (2020). Distinguishing Knowledge Impact from Citation Impact: A Methodology for Analysing Knowledge Impact for the Literature Review Genre."},"file_date_updated":"2020-05-19T15:09:28Z","abstract":[{"text":"The scientific impact of research papers is multi-dimensional and can be determined quantitatively by means of citation analysis and qualitatively by means of content analysis. Accounting for the widely acknowledged limitations of pure citation analysis, we adopt a knowledge-based perspective on scientific impact to develop a methodology for content-based citation analysis which allows determining how papers have enabled knowledge development in subsequent research (knowledge impact). As knowledge development differs between research genres, we develop a new knowledgebased citation analysis methodology for the genre of standalone literature reviews (LRs). We apply the suggested methodology to the IS business value domain by manually coding 22 LRs and 1,228 citing papers (CPs) and show that the results challenge the assumption that citations indicate knowledge impact. We derive implications for distinguishing knowledge impact from citation impact in the LR genre. Finally, we develop recommendations for authors of LRs, scientific evaluation committees and editorial boards of journals how to apply and benefit from the suggested methodology, and we discuss its efficiency and automatization.","lang":"eng"}]},{"department":[{"_id":"277"}],"keyword":["Reading and skimming","Exploring literature","Review methodology","Design science research","Schemata theory"],"type":"conference","date_created":"2020-05-24T15:23:32Z","file":[{"file_name":"2020-03-27-ECIS2020 Designing a novel strategy for exploring literature corpora.pdf","file_size":590754,"access_level":"open_access","relation":"main_file","date_updated":"2021-08-13T14:04:55Z","file_id":"17056","content_type":"application/pdf","creator":"hsiemes","date_created":"2020-05-24T17:17:32Z"}],"abstract":[{"lang":"eng","text":"Understanding a new literature corpus can be a grueling experience for junior scholars. Nevertheless, corresponding guidelines have not been updated for decades. We contend that the traditional strategy of skimming all papers and reading selected papers afterwards needs to be revised. Therefore, we design a new strategy that guides the overall exploratory process by prioritizing influential papers for initial reading, followed by skimming the remaining papers. Consistent with schemata theory, starting with in-depth reading allows readers to acquire more substantial prior content schemata, which are representa-tive for the literature corpus and useful in the following skimming process. To this end, we develop a prototype that identifies the influential papers from a set of PDFs, which is illustrated in a case study in the IT business value domain. With the new strategy, we envision a more efficient process of exploring unknown literature corpora."}],"publication":"28th European Conference on Information Systems (ECIS 2020)","language":[{"iso":"eng"}],"date_updated":"2022-01-06T06:53:03Z","author":[{"full_name":"Wagner, Gerit","last_name":"Wagner","first_name":"Gerit"},{"first_name":"Philipp","last_name":"Empl","full_name":"Empl, Philipp"},{"full_name":"Schryen, Guido","last_name":"Schryen","first_name":"Guido","id":"72850"}],"title":"Designing a Novel Strategy for Exploring Literature Corpora","year":"2020","oa":"1","citation":{"ieee":"G. Wagner, P. Empl, and G. Schryen, “Designing a Novel Strategy for Exploring Literature Corpora,” in 28th European Conference on Information Systems (ECIS 2020), Marrakesh, Morocco, 2020.","mla":"Wagner, Gerit, et al. “Designing a Novel Strategy for Exploring Literature Corpora.” 28th European Conference on Information Systems (ECIS 2020), 2020.","apa":"Wagner, G., Empl, P., & Schryen, G. (2020). Designing a Novel Strategy for Exploring Literature Corpora. In 28th European Conference on Information Systems (ECIS 2020). Marrakesh, Morocco.","bibtex":"@inproceedings{Wagner_Empl_Schryen_2020, title={Designing a Novel Strategy for Exploring Literature Corpora}, booktitle={28th European Conference on Information Systems (ECIS 2020)}, author={Wagner, Gerit and Empl, Philipp and Schryen, Guido}, year={2020} }","ama":"Wagner G, Empl P, Schryen G. Designing a Novel Strategy for Exploring Literature Corpora. In: 28th European Conference on Information Systems (ECIS 2020). ; 2020.","short":"G. Wagner, P. Empl, G. Schryen, in: 28th European Conference on Information Systems (ECIS 2020), 2020.","chicago":"Wagner, Gerit, Philipp Empl, and Guido Schryen. “Designing a Novel Strategy for Exploring Literature Corpora.” In 28th European Conference on Information Systems (ECIS 2020), 2020."},"file_date_updated":"2021-08-13T14:04:55Z","ddc":["000"],"user_id":"61579","_id":"17055","has_accepted_license":"1","conference":{"location":"Marrakesh, Morocco","name":"Twenty-Eigth European Conference on Information Systems (ECIS2020)"},"status":"public"},{"date_updated":"2022-01-06T06:52:29Z","author":[{"full_name":"Kersting, Joschka","last_name":"Kersting","first_name":"Joschka","id":"58701"},{"id":"42496","orcid":"0000-0002-8180-5606","first_name":"Michaela","last_name":"Geierhos","full_name":"Geierhos, Michaela"}],"year":"2020","title":"Aspect Phrase Extraction in Sentiment Analysis with Deep Learning","language":[{"iso":"eng"}],"abstract":[{"text":"This paper deals with aspect phrase extraction and classification in sentiment analysis. We summarize current approaches and datasets from the domain of aspect-based sentiment analysis. This domain detects sentiments expressed for individual aspects in unstructured text data. So far, mainly commercial user reviews for products or services such as restaurants were investigated. We here present our dataset consisting of German physician reviews, a sensitive and linguistically complex field. Furthermore, we describe the annotation process of a dataset for supervised learning with neural networks. Moreover, we introduce our model for extracting and classifying aspect phrases in one step, which obtains an F1-score of 80%. By applying it to a more complex domain, our approach and results outperform previous approaches.","lang":"eng"}],"publication":"Proceedings of the 12th International Conference on Agents and Artificial Intelligence (ICAART 2020) -- Special Session on Natural Language Processing in Artificial Intelligence (NLPinAI 2020)","department":[{"_id":"579"}],"type":"conference","keyword":["Deep Learning","Natural Language Processing","Aspect-based Sentiment Analysis"],"date_created":"2020-01-15T08:35:07Z","file":[{"creator":"jkers","date_created":"2020-09-18T09:27:00Z","file_size":421780,"access_level":"closed","file_name":"Kersting & Geierhos (2020), Kersting2020.pdf","date_updated":"2020-09-18T09:27:00Z","relation":"main_file","content_type":"application/pdf","success":1,"file_id":"19576"}],"has_accepted_license":"1","conference":{"name":"International Conference on Agents and Artificial Intelligence (ICAART) -- Special Session on Natural Language Processing in Artificial Intelligence (NLPinAI)","location":"Valetta, Malta"},"status":"public","ddc":["000"],"user_id":"58701","publisher":"SCITEPRESS","_id":"15580","page":"391--400","project":[{"_id":"3","name":"SFB 901 - Project Area B"},{"_id":"1","name":"SFB 901"},{"_id":"9","name":"SFB 901 - Subproject B1"}],"citation":{"ama":"Kersting J, Geierhos M. Aspect Phrase Extraction in Sentiment Analysis with Deep Learning. In: Proceedings of the 12th International Conference on Agents and Artificial Intelligence (ICAART 2020) -- Special Session on Natural Language Processing in Artificial Intelligence (NLPinAI 2020). Setúbal, Portugal: SCITEPRESS; 2020:391--400.","bibtex":"@inproceedings{Kersting_Geierhos_2020, place={Setúbal, Portugal}, title={Aspect Phrase Extraction in Sentiment Analysis with Deep Learning}, booktitle={Proceedings of the 12th International Conference on Agents and Artificial Intelligence (ICAART 2020) -- Special Session on Natural Language Processing in Artificial Intelligence (NLPinAI 2020)}, publisher={SCITEPRESS}, author={Kersting, Joschka and Geierhos, Michaela}, year={2020}, pages={391--400} }","mla":"Kersting, Joschka, and Michaela Geierhos. “Aspect Phrase Extraction in Sentiment Analysis with Deep Learning.” Proceedings of the 12th International Conference on Agents and Artificial Intelligence (ICAART 2020) -- Special Session on Natural Language Processing in Artificial Intelligence (NLPinAI 2020), SCITEPRESS, 2020, pp. 391--400.","short":"J. Kersting, M. Geierhos, in: Proceedings of the 12th International Conference on Agents and Artificial Intelligence (ICAART 2020) -- Special Session on Natural Language Processing in Artificial Intelligence (NLPinAI 2020), SCITEPRESS, Setúbal, Portugal, 2020, pp. 391--400.","chicago":"Kersting, Joschka, and Michaela Geierhos. “Aspect Phrase Extraction in Sentiment Analysis with Deep Learning.” In Proceedings of the 12th International Conference on Agents and Artificial Intelligence (ICAART 2020) -- Special Session on Natural Language Processing in Artificial Intelligence (NLPinAI 2020), 391--400. Setúbal, Portugal: SCITEPRESS, 2020.","apa":"Kersting, J., & Geierhos, M. (2020). Aspect Phrase Extraction in Sentiment Analysis with Deep Learning. In Proceedings of the 12th International Conference on Agents and Artificial Intelligence (ICAART 2020) -- Special Session on Natural Language Processing in Artificial Intelligence (NLPinAI 2020) (pp. 391--400). Setúbal, Portugal: SCITEPRESS.","ieee":"J. Kersting and M. Geierhos, “Aspect Phrase Extraction in Sentiment Analysis with Deep Learning,” in Proceedings of the 12th International Conference on Agents and Artificial Intelligence (ICAART 2020) -- Special Session on Natural Language Processing in Artificial Intelligence (NLPinAI 2020), Valetta, Malta, 2020, pp. 391--400."},"file_date_updated":"2020-09-18T09:27:00Z","place":"Setúbal, Portugal"},{"year":"2020","title":"Designing City Center Area Recommendation Systems ","author":[{"id":"64394","last_name":"zur Heiden","first_name":"Philipp","full_name":"zur Heiden, Philipp"},{"full_name":"Berendes, Carsten Ingo","first_name":"Carsten Ingo","last_name":"Berendes","id":"53344"},{"id":"59677","full_name":"Beverungen, Daniel","last_name":"Beverungen","first_name":"Daniel"}],"publication_status":"published","date_updated":"2022-01-06T06:52:48Z","main_file_link":[{"open_access":"1","url":"https://library.gito.de/open-access-pdf/E1_City_recommendations_Master_final.pdf"}],"language":[{"iso":"eng"}],"doi":"doi.org/10.30844/wi_2020_e1-heiden","publication":"Proceedings of the 15th International Conference on Wirtschaftsinformatik","abstract":[{"lang":"eng","text":"To decide in which part of town to open stores, high street retailers consult statistical data on customers and cities, but they cannot analyze their customers’ shopping behavior and geospatial features of a city due to missing data. While previous research has proposed recommendation systems and decision aids that address this type of decision problem – including factory location and assortment planning – there currently is no design knowledge available to prescribe the design of city center area recommendation systems (CCARS). We set out to design a software prototype considering local customers’ shopping interests and geospatial data on their shopping trips for retail site selection. With real data on 500 customers and 1,100 shopping trips, we demonstrate and evaluate our IT artifact. Our results illustrate how retailers and public town center managers can use CCARS for spatial location selection, growing retailers’ profits and a city center’s attractiveness for its citizens."}],"file":[{"file_id":"16286","success":1,"content_type":"application/pdf","relation":"main_file","date_updated":"2020-03-13T06:58:54Z","file_name":"E1_City_recommendations_Master_final.pdf","file_size":1370273,"access_level":"closed","date_created":"2020-03-13T06:58:54Z","creator":"pzh"}],"date_created":"2020-03-13T07:05:24Z","keyword":["Town Center Management","High Street Retail","Recommender Systems","Geospatial Recommendations","Design Science Research"],"type":"conference","department":[{"_id":"526"}],"status":"public","conference":{"location":"Potsdam","name":"15th International Conference on Wirtschaftsinformatik","start_date":"2020-03-07","end_date":"2020-03-11"},"has_accepted_license":"1","_id":"16285","user_id":"64394","ddc":["000"],"file_date_updated":"2020-03-13T06:58:54Z","citation":{"short":"P. zur Heiden, C.I. Berendes, D. Beverungen, in: Proceedings of the 15th International Conference on Wirtschaftsinformatik, Potsdam, 2020.","chicago":"Heiden, Philipp zur, Carsten Ingo Berendes, and Daniel Beverungen. “Designing City Center Area Recommendation Systems .” In Proceedings of the 15th International Conference on Wirtschaftsinformatik. Potsdam, 2020. https://doi.org/doi.org/10.30844/wi_2020_e1-heiden.","apa":"zur Heiden, P., Berendes, C. I., & Beverungen, D. (2020). Designing City Center Area Recommendation Systems . In Proceedings of the 15th International Conference on Wirtschaftsinformatik. Potsdam. https://doi.org/doi.org/10.30844/wi_2020_e1-heiden","ieee":"P. zur Heiden, C. I. Berendes, and D. Beverungen, “Designing City Center Area Recommendation Systems ,” in Proceedings of the 15th International Conference on Wirtschaftsinformatik, Potsdam, 2020.","ama":"zur Heiden P, Berendes CI, Beverungen D. Designing City Center Area Recommendation Systems . In: Proceedings of the 15th International Conference on Wirtschaftsinformatik. Potsdam; 2020. doi:doi.org/10.30844/wi_2020_e1-heiden","bibtex":"@inproceedings{zur Heiden_Berendes_Beverungen_2020, place={Potsdam}, title={Designing City Center Area Recommendation Systems }, DOI={doi.org/10.30844/wi_2020_e1-heiden}, booktitle={Proceedings of the 15th International Conference on Wirtschaftsinformatik}, author={zur Heiden, Philipp and Berendes, Carsten Ingo and Beverungen, Daniel}, year={2020} }","mla":"zur Heiden, Philipp, et al. “Designing City Center Area Recommendation Systems .” Proceedings of the 15th International Conference on Wirtschaftsinformatik, 2020, doi:doi.org/10.30844/wi_2020_e1-heiden."},"quality_controlled":"1","project":[{"_id":"35","grant_number":"02K15A073","name":"Interaktive Einkaufserlebnisse in Innenstädten durch digitale Dienstleistungen"}],"place":"Potsdam","oa":"1"},{"citation":{"mla":"Lück, Sonja, et al. “Early Disclosure of Invention and Reduced Duplication: An Empirical Test.” Management Science, vol. 66, no. 6, Institute for Operations Research and the Management Sciences (INFORMS), 2020, pp. 2677–85, doi:10.1287/mnsc.2019.3521.","ama":"Lück S, Balsmeier B, Seliger F, Fleming L. Early Disclosure of Invention and Reduced Duplication: An Empirical Test. Management Science. 2020;66(6):2677-2685. doi:10.1287/mnsc.2019.3521","bibtex":"@article{Lück_Balsmeier_Seliger_Fleming_2020, title={Early Disclosure of Invention and Reduced Duplication: An Empirical Test}, volume={66}, DOI={10.1287/mnsc.2019.3521}, number={6}, journal={Management Science}, publisher={Institute for Operations Research and the Management Sciences (INFORMS)}, author={Lück, Sonja and Balsmeier, Benjamin and Seliger, Florian and Fleming, Lee}, year={2020}, pages={2677–2685} }","apa":"Lück, S., Balsmeier, B., Seliger, F., & Fleming, L. (2020). Early Disclosure of Invention and Reduced Duplication: An Empirical Test. Management Science, 66(6), 2677–2685. https://doi.org/10.1287/mnsc.2019.3521","ieee":"S. Lück, B. Balsmeier, F. Seliger, and L. Fleming, “Early Disclosure of Invention and Reduced Duplication: An Empirical Test,” Management Science, vol. 66, no. 6, pp. 2677–2685, 2020, doi: 10.1287/mnsc.2019.3521.","short":"S. Lück, B. Balsmeier, F. Seliger, L. Fleming, Management Science 66 (2020) 2677–2685.","chicago":"Lück, Sonja, Benjamin Balsmeier, Florian Seliger, and Lee Fleming. “Early Disclosure of Invention and Reduced Duplication: An Empirical Test.” Management Science 66, no. 6 (2020): 2677–85. https://doi.org/10.1287/mnsc.2019.3521."},"status":"public","user_id":"950","volume":66,"page":"2677-2685","_id":"31802","publisher":"Institute for Operations Research and the Management Sciences (INFORMS)","abstract":[{"text":" Much work on innovation strategy assumes or theorizes that competition in innovation elicits duplication of research and that disclosure decreases such duplication. We validate this empirically using the American Inventors Protection Act (AIPA), three complementary identification strategies, and a new measure of blocked future patent applications. We show that AIPA—intended to reduce duplication, through default disclosure of patent applications 18 months after filing—reduced duplication in the U.S. and European patent systems. The blocking measure provides a clear and micro measure of technological competition that can be aggregated to facilitate the empirical investigation of innovation, firm strategy, and the positive and negative externalities of patenting. This paper was accepted by Joshua Gans, business strategy. ","lang":"eng"}],"issue":"6","publication":"Management Science","keyword":["Management Science and Operations Research","Strategy and Management"],"type":"journal_article","department":[{"_id":"200"},{"_id":"281"},{"_id":"475"}],"date_created":"2022-06-08T08:29:59Z","publication_status":"published","date_updated":"2022-06-08T10:08:11Z","intvolume":" 66","title":"Early Disclosure of Invention and Reduced Duplication: An Empirical Test","year":"2020","author":[{"first_name":"Sonja","last_name":"Lück","orcid":"0000-0003-0380-1965","full_name":"Lück, Sonja","id":"950"},{"first_name":"Benjamin","last_name":"Balsmeier","full_name":"Balsmeier, Benjamin"},{"last_name":"Seliger","first_name":"Florian","full_name":"Seliger, Florian"},{"full_name":"Fleming, Lee","last_name":"Fleming","first_name":"Lee"}],"publication_identifier":{"issn":["0025-1909","1526-5501"]},"doi":"10.1287/mnsc.2019.3521","language":[{"iso":"eng"}]},{"oa":"1","file_date_updated":"2020-03-05T10:36:15Z","citation":{"bibtex":"@article{Schryen_Wagner_Benlian_Paré_2020, title={A Knowledge Development Perspective on Literature Reviews: Validation of a New Typology in the IS Field}, volume={46}, DOI={10.17705/1CAIS.04607}, journal={Communications of the AIS}, author={Schryen, Guido and Wagner, Gerit and Benlian, Alexander and Paré, Guy}, year={2020}, pages={134–186} }","short":"G. Schryen, G. Wagner, A. Benlian, G. Paré, Communications of the AIS 46 (2020) 134–186.","ama":"Schryen G, Wagner G, Benlian A, Paré G. A Knowledge Development Perspective on Literature Reviews: Validation of a New Typology in the IS Field. Communications of the AIS. 2020;46:134-186. doi:10.17705/1CAIS.04607","chicago":"Schryen, Guido, Gerit Wagner, Alexander Benlian, and Guy Paré. “A Knowledge Development Perspective on Literature Reviews: Validation of a New Typology in the IS Field.” Communications of the AIS 46 (2020): 134–86. https://doi.org/10.17705/1CAIS.04607.","ieee":"G. Schryen, G. Wagner, A. Benlian, and G. Paré, “A Knowledge Development Perspective on Literature Reviews: Validation of a New Typology in the IS Field,” Communications of the AIS, vol. 46, pp. 134–186, 2020, doi: 10.17705/1CAIS.04607.","apa":"Schryen, G., Wagner, G., Benlian, A., & Paré, G. (2020). A Knowledge Development Perspective on Literature Reviews: Validation of a New Typology in the IS Field. Communications of the AIS, 46, 134–186. https://doi.org/10.17705/1CAIS.04607","mla":"Schryen, Guido, et al. “A Knowledge Development Perspective on Literature Reviews: Validation of a New Typology in the IS Field.” Communications of the AIS, vol. 46, 2020, pp. 134–86, doi:10.17705/1CAIS.04607."},"page":"134-186","_id":"11946","user_id":"72850","ddc":["000"],"volume":46,"status":"public","has_accepted_license":"1","file":[{"date_created":"2020-02-26T18:12:29Z","creator":"schryen","file_id":"16115","content_type":"application/pdf","relation":"main_file","date_updated":"2020-03-05T10:36:15Z","file_name":"RA-18-198.pdf","access_level":"open_access","file_size":1146830}],"date_created":"2019-07-12T12:01:02Z","type":"journal_article","keyword":["Literature review","knowledge development","knowledge building activities","knowledge-based typology","information systems research"],"department":[{"_id":"277"}],"publication":"Communications of the AIS","abstract":[{"text":"Literature reviews (LRs) play an important role in the development of domain knowledge in all fields. Yet, we observe a\r\nlack of insights into the activities with which LRs actually develop knowledge. To address this important gap, we (1)\r\nderive knowledge building activities from the extant literature on LRs, (2) suggest a knowledge-based typology of LRs\r\nthat complements existing typologies, and (3) apply the suggested typology in an empirical study that explores how LRs\r\nwith different goals and methodologies have contributed to knowledge development. The analysis of 240 LRs published\r\nin 40 renowned IS journals between 2000 and 2014 allows us to draw a detailed picture of knowledge development\r\nachieved by one of the most important genres in the IS field. An overarching contribution of our work is to unify extant\r\nconceptualizations of LRs by clarifying and illustrating how LRs apply different methodologies in a range of knowledge\r\nbuilding activities to achieve their goals with respect to theory.","lang":"eng"}],"language":[{"iso":"eng"}],"doi":"10.17705/1CAIS.04607","title":"A Knowledge Development Perspective on Literature Reviews: Validation of a New Typology in the IS Field","year":"2020","author":[{"id":"72850","last_name":"Schryen","first_name":"Guido","full_name":"Schryen, Guido"},{"full_name":"Wagner, Gerit","last_name":"Wagner","first_name":"Gerit"},{"full_name":"Benlian, Alexander","last_name":"Benlian","first_name":"Alexander"},{"full_name":"Paré, Guy","first_name":"Guy","last_name":"Paré"}],"publication_identifier":{"issn":[" 1529-3181"]},"date_updated":"2022-06-10T06:38:58Z","intvolume":" 46"},{"intvolume":" 3","date_updated":"2023-01-06T12:18:16Z","publication_status":"published","author":[{"first_name":"Carina","last_name":"Caruso","full_name":"Caruso, Carina","id":"23123"},{"last_name":"Adammek","first_name":"Christine","full_name":"Adammek, Christine"},{"full_name":"Bonanati, Sabrina","last_name":"Bonanati","first_name":"Sabrina"},{"first_name":"Sybille","last_name":"Wiescholek","full_name":"Wiescholek, Sybille"}],"publication_identifier":{"issn":["2625-0675"]},"title":"Motivierende Lernzugänge als Ausgangspunkt der Professionalisierung angehender Lehrer_innen","year":"2020","alternative_title":["Ein Blick auf kompetenzorientiertes, ästhetisches und biographisches Lernen im Lehramtsstudium"],"doi":"10.4119/hlz-2540","language":[{"iso":"other"}],"abstract":[{"text":"Im Artikel werden drei verschiedene Lernzugänge (kom-petenzorientiertes, ästhetisches und biographisches Lernen) vorgestellt und aus theoretischer Perspektive deren motivierender Gehalt für selbstreguliertes Lernen in Praxisphasen des Lehramtsstudiumsherausgearbeitet. Als theoretische Grund-lage dient die Selbstbestimmungstheorie als zentrale motivationale Theorie zur Erklärung selbstbestimmten Handelns.","lang":"ger"},{"text":"The article addresses how motivational learning approaches (competency-oriented, aesthetic and biographical) can contribute to the professionalization of preservice teachers during a long-term internship. As a theoretical basis, the self-determination theory serves as a central motivational theory for explaining self-determined action.","lang":"eng"}],"issue":"1","publication":"Herausforderung Lehrer*innenbildung - Zeitschrift Zur Konzeption, Gestaltung Und Diskussion","keyword":["ästhetische Forschung","Biographiearbeit","Praxissemester","Professionalisierung","selbstreguliertes Lernen","Motivation / aesthetic research","biographical work","long-term internship","profes-sionalization","self-regulated learning","motivation"],"type":"journal_article","date_created":"2023-01-05T13:58:28Z","status":"public","volume":3,"user_id":"86519","_id":"35298","page":"18-33","citation":{"chicago":"Caruso, Carina, Christine Adammek, Sabrina Bonanati, and Sybille Wiescholek. “Motivierende Lernzugänge als Ausgangspunkt der Professionalisierung angehender Lehrer_innen.” Herausforderung Lehrer*innenbildung - Zeitschrift Zur Konzeption, Gestaltung Und Diskussion 3, no. 1 (2020): 18–33. https://doi.org/10.4119/hlz-2540.","short":"C. Caruso, C. Adammek, S. Bonanati, S. Wiescholek, Herausforderung Lehrer*innenbildung - Zeitschrift Zur Konzeption, Gestaltung Und Diskussion 3 (2020) 18–33.","ieee":"C. Caruso, C. Adammek, S. Bonanati, and S. Wiescholek, “Motivierende Lernzugänge als Ausgangspunkt der Professionalisierung angehender Lehrer_innen,” Herausforderung Lehrer*innenbildung - Zeitschrift Zur Konzeption, Gestaltung Und Diskussion, vol. 3, no. 1, pp. 18–33, 2020, doi: 10.4119/hlz-2540.","apa":"Caruso, C., Adammek, C., Bonanati, S., & Wiescholek, S. (2020). Motivierende Lernzugänge als Ausgangspunkt der Professionalisierung angehender Lehrer_innen. Herausforderung Lehrer*innenbildung - Zeitschrift Zur Konzeption, Gestaltung Und Diskussion, 3(1), 18–33. https://doi.org/10.4119/hlz-2540","bibtex":"@article{Caruso_Adammek_Bonanati_Wiescholek_2020, title={Motivierende Lernzugänge als Ausgangspunkt der Professionalisierung angehender Lehrer_innen}, volume={3}, DOI={10.4119/hlz-2540}, number={1}, journal={Herausforderung Lehrer*innenbildung - Zeitschrift Zur Konzeption, Gestaltung Und Diskussion}, author={Caruso, Carina and Adammek, Christine and Bonanati, Sabrina and Wiescholek, Sybille}, year={2020}, pages={18–33} }","ama":"Caruso C, Adammek C, Bonanati S, Wiescholek S. Motivierende Lernzugänge als Ausgangspunkt der Professionalisierung angehender Lehrer_innen. Herausforderung Lehrer*innenbildung - Zeitschrift Zur Konzeption, Gestaltung Und Diskussion. 2020;3(1):18-33. doi:10.4119/hlz-2540","mla":"Caruso, Carina, et al. “Motivierende Lernzugänge als Ausgangspunkt der Professionalisierung angehender Lehrer_innen.” Herausforderung Lehrer*innenbildung - Zeitschrift Zur Konzeption, Gestaltung Und Diskussion, vol. 3, no. 1, 2020, pp. 18–33, doi:10.4119/hlz-2540."}},{"oa":"1","citation":{"chicago":"Hahn, Charlotte Anna. “Informationskompetenz durch E-Learning? Durch Lernvideos nach Literatur suchen.” die hochschullehre, no. 6 (2020).","short":"C.A. Hahn, die hochschullehre (2020).","apa":"Hahn, C. A. (2020). Informationskompetenz durch E-Learning? Durch Lernvideos nach Literatur suchen. die hochschullehre, 6.","ieee":"C. A. Hahn, “Informationskompetenz durch E-Learning? Durch Lernvideos nach Literatur suchen,” die hochschullehre, no. 6, 2020.","ama":"Hahn CA. Informationskompetenz durch E-Learning? Durch Lernvideos nach Literatur suchen. die hochschullehre. 2020;(6).","bibtex":"@article{Hahn_2020, title={Informationskompetenz durch E-Learning? Durch Lernvideos nach Literatur suchen}, number={6}, journal={die hochschullehre}, author={Hahn, Charlotte Anna}, year={2020} }","mla":"Hahn, Charlotte Anna. “Informationskompetenz durch E-Learning? Durch Lernvideos nach Literatur suchen.” die hochschullehre, no. 6, 2020."},"file_date_updated":"2022-09-08T09:05:22Z","_id":"33299","ddc":["020"],"user_id":"14931","status":"public","has_accepted_license":"1","date_created":"2022-09-08T09:05:30Z","file":[{"date_created":"2022-09-08T09:05:22Z","creator":"chogg","content_type":"application/pdf","file_id":"33300","date_updated":"2022-09-08T09:05:22Z","relation":"main_file","file_size":318104,"access_level":"open_access","file_name":"HSL2012W.pdf"}],"department":[{"_id":"1"},{"_id":"384"}],"keyword":["E-Learning","information competence","literature","library","research"],"type":"journal_article","issue":"6","publication":"die hochschullehre","abstract":[{"lang":"eng","text":"The aim of this study was to find out whether teaching how to search for literature\r\nwould be more beneficial to students and teachers if done online through short videos\r\nrather than in person during course time. To find out whether online videos are more\r\nbeneficial, two courses were asked to fill in questionnaires, one at the beginning and\r\none at the end of the semester. One of the courses received the input online via videos\r\nand were given an exercise to put the newly learned skills to use, the other course\r\nserved as a control group and learned how to search for literature during the course.\r\nThe results show that while the difference between the two groups is not significant,\r\nthe videos can still be regarded as being more beneficial than teaching the necessary\r\nskills during course time."}],"language":[{"iso":"ger"}],"main_file_link":[{"open_access":"1","url":"http://www.hochschullehre.org/wp-content/files/diehochschullehre_2020_Hahn_Informationskompetenz.pdf"}],"publication_identifier":{"eissn":["ISSN 2199-8825"]},"author":[{"full_name":"Hahn, Charlotte Anna","first_name":"Charlotte Anna","last_name":"Hahn","id":"25934"}],"title":"Informationskompetenz durch E-Learning? Durch Lernvideos nach Literatur suchen","year":"2020","date_updated":"2023-10-13T10:17:31Z","publication_status":"published"},{"citation":{"ieee":"L. Mordhorst and B. Gössling, “Dual Study Programmes as a Design Challenge: Identifying Areas for Improvement as a Starting Point for Interventions,” EDeR. Educational Design Research, vol. 4, no. 1, Art. no. 24, 2020, doi: 10.15460/eder.4.1.1482.","apa":"Mordhorst, L., & Gössling, B. (2020). Dual Study Programmes as a Design Challenge: Identifying Areas for Improvement as a Starting Point for Interventions. EDeR. Educational Design Research, 4(1), Article 24. https://doi.org/10.15460/eder.4.1.1482","chicago":"Mordhorst, Lisa, and Bernd Gössling. “Dual Study Programmes as a Design Challenge: Identifying Areas for Improvement as a Starting Point for Interventions.” EDeR. Educational Design Research 4, no. 1 (2020). https://doi.org/10.15460/eder.4.1.1482.","short":"L. Mordhorst, B. Gössling, EDeR. Educational Design Research 4 (2020).","mla":"Mordhorst, Lisa, and Bernd Gössling. “Dual Study Programmes as a Design Challenge: Identifying Areas for Improvement as a Starting Point for Interventions.” EDeR. Educational Design Research, vol. 4, no. 1, 24, Staats- und Universitatsbibliothek Hamburg Carl von Ossietzky, 2020, doi:10.15460/eder.4.1.1482.","bibtex":"@article{Mordhorst_Gössling_2020, title={Dual Study Programmes as a Design Challenge: Identifying Areas for Improvement as a Starting Point for Interventions}, volume={4}, DOI={10.15460/eder.4.1.1482}, number={124}, journal={EDeR. Educational Design Research}, publisher={Staats- und Universitatsbibliothek Hamburg Carl von Ossietzky}, author={Mordhorst, Lisa and Gössling, Bernd}, year={2020} }","ama":"Mordhorst L, Gössling B. Dual Study Programmes as a Design Challenge: Identifying Areas for Improvement as a Starting Point for Interventions. EDeR Educational Design Research. 2020;4(1). doi:10.15460/eder.4.1.1482"},"_id":"48366","publisher":"Staats- und Universitatsbibliothek Hamburg Carl von Ossietzky","user_id":"81839","volume":4,"status":"public","date_created":"2023-10-20T16:30:26Z","type":"journal_article","keyword":["Dual study programmes","Design challenges","Pedagogic development of HEIs","Literature review","Study programme development","DBR cycle"],"publication":"EDeR. Educational Design Research","issue":"1","abstract":[{"lang":"eng","text":"The proportion of freshmen enrolled in dual study programmes has steadily increased in recent years. From the perspective of potential students, these programmes are highly attractive because they combine types of learning that used to be largely separate at an institutional level: vocational and academic learning. In training-integrated dual study programmes, different institutional contexts, governance regimes, teaching styles and learning environments make bridging these two worlds of learning a challenge for both educators and learners. However, these programmes also allow leeway for didactic innovation, through the cooperation of different types of educational institutions and through new ways of using available didactic methods, and for establishing a new relationship between higher education (HE) and vocational education and training (VET). This paper positions training-integrated dual study programmes as an object of design-based research (DBR). By developing and using an extended model for the pedagogic development of HEIs, “pädagogische Hochschulentwicklung” (Brahm, Jenert, & Euler, 2016a, p. 19; Euler, 2013, p. 360), the paper systematically identifies generic educational problems in these hybrids. Based on a literature review, this paper classifies and explains the design challenges at the level of the learning environment, the study programme and the organisation. The challenges revolve mainly around the cooperation and integration of HE and VET. The paper concludes with an outlook on future DBR projects designing dual studies."}],"article_number":"24","language":[{"iso":"eng"}],"doi":"10.15460/eder.4.1.1482","title":"Dual Study Programmes as a Design Challenge: Identifying Areas for Improvement as a Starting Point for Interventions","year":"2020","author":[{"last_name":"Mordhorst","first_name":"Lisa","full_name":"Mordhorst, Lisa","id":"81839"},{"full_name":"Gössling, Bernd","last_name":"Gössling","first_name":"Bernd"}],"publication_identifier":{"issn":["2511-0667"]},"date_updated":"2023-10-20T16:35:36Z","publication_status":"published","intvolume":" 4","article_type":"original"}]