---
_id: '49607'
abstract:
- lang: eng
text: In this work, we utilize thin dielectric meta-atoms placed on a silver substrate
to efficiently enhance and manipulate the third-harmonic generation. We theoretically
and experimentally reveal that when the structural symmetry of the meta-atom is
incompatible with the lattice symmetry of an array, some generalized nonlinear
geometric phases appear, which offers new possibilities for harmonic generation
control beyond the accessible symmetries governed by the selection rule. The underlying
mechanism is attributed to the modified rotation of the effective principal axis
of a dense meta-atom array, where the strong coupling among the units gives rise
to a generalized linear geometric phase modulation of the pump light. Therefore,
nonlinear geometric phases carried by third-harmonic emissions are the natural
result of the wave-mixing process among the modes excited at the fundamental frequency.
This mechanism further points out a new strategy to predict the nonlinear geometric
phases delivered by the nanostructures according to their linear responses. Our
design is simple and efficient and offers alternatives for the nonlinear meta-devices
that are capable of flexible photon generation and manipulation.
article_type: original
author:
- first_name: Bingyi
full_name: Liu, Bingyi
last_name: Liu
- first_name: René
full_name: Geromel, René
last_name: Geromel
- first_name: Zhaoxian
full_name: Su, Zhaoxian
last_name: Su
- first_name: Kai
full_name: Guo, Kai
last_name: Guo
- first_name: Yongtian
full_name: Wang, Yongtian
last_name: Wang
- first_name: Zhongyi
full_name: Guo, Zhongyi
last_name: Guo
- first_name: Lingling
full_name: Huang, Lingling
last_name: Huang
- first_name: Thomas
full_name: Zentgraf, Thomas
id: '30525'
last_name: Zentgraf
orcid: 0000-0002-8662-1101
citation:
ama: Liu B, Geromel R, Su Z, et al. Nonlinear Dielectric Geometric-Phase Metasurface
with Simultaneous Structure and Lattice Symmetry Design. ACS Photonics.
2023;10(12):4357-4366. doi:10.1021/acsphotonics.3c01163
apa: Liu, B., Geromel, R., Su, Z., Guo, K., Wang, Y., Guo, Z., Huang, L., &
Zentgraf, T. (2023). Nonlinear Dielectric Geometric-Phase Metasurface with Simultaneous
Structure and Lattice Symmetry Design. ACS Photonics, 10(12), 4357–4366.
https://doi.org/10.1021/acsphotonics.3c01163
bibtex: '@article{Liu_Geromel_Su_Guo_Wang_Guo_Huang_Zentgraf_2023, title={Nonlinear
Dielectric Geometric-Phase Metasurface with Simultaneous Structure and Lattice
Symmetry Design}, volume={10}, DOI={10.1021/acsphotonics.3c01163},
number={12}, journal={ACS Photonics}, publisher={American Chemical Society (ACS)},
author={Liu, Bingyi and Geromel, René and Su, Zhaoxian and Guo, Kai and Wang,
Yongtian and Guo, Zhongyi and Huang, Lingling and Zentgraf, Thomas}, year={2023},
pages={4357–4366} }'
chicago: 'Liu, Bingyi, René Geromel, Zhaoxian Su, Kai Guo, Yongtian Wang, Zhongyi
Guo, Lingling Huang, and Thomas Zentgraf. “Nonlinear Dielectric Geometric-Phase
Metasurface with Simultaneous Structure and Lattice Symmetry Design.” ACS Photonics
10, no. 12 (2023): 4357–66. https://doi.org/10.1021/acsphotonics.3c01163.'
ieee: 'B. Liu et al., “Nonlinear Dielectric Geometric-Phase Metasurface with
Simultaneous Structure and Lattice Symmetry Design,” ACS Photonics, vol.
10, no. 12, pp. 4357–4366, 2023, doi: 10.1021/acsphotonics.3c01163.'
mla: Liu, Bingyi, et al. “Nonlinear Dielectric Geometric-Phase Metasurface with
Simultaneous Structure and Lattice Symmetry Design.” ACS Photonics, vol.
10, no. 12, American Chemical Society (ACS), 2023, pp. 4357–66, doi:10.1021/acsphotonics.3c01163.
short: B. Liu, R. Geromel, Z. Su, K. Guo, Y. Wang, Z. Guo, L. Huang, T. Zentgraf,
ACS Photonics 10 (2023) 4357–4366.
date_created: 2023-12-13T14:11:41Z
date_updated: 2024-04-16T06:47:40Z
department:
- _id: '15'
- _id: '230'
- _id: '289'
- _id: '623'
doi: 10.1021/acsphotonics.3c01163
funded_apc: '1'
intvolume: ' 10'
issue: '12'
keyword:
- Electrical and Electronic Engineering
- Atomic and Molecular Physics
- and Optics
- Biotechnology
- Electronic
- Optical and Magnetic Materials
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://pubs.acs.org/doi/full/10.1021/acsphotonics.3c01163
oa: '1'
page: 4357-4366
project:
- _id: '170'
grant_number: '231447078'
name: 'TRR 142 - B09: TRR 142 - Effiziente Erzeugung mit maßgeschneiderter optischer
Phaselage der zweiten Harmonischen mittels Quasi-gebundener Zustände in GaAs Metaoberflächen
(B09*)'
- _id: '55'
name: 'TRR 142 - B: TRR 142 - Project Area B'
- _id: '53'
grant_number: '231447078'
name: 'TRR 142: TRR 142 - Maßgeschneiderte nichtlineare Photonik: Von grundlegenden
Konzepten zu funktionellen Strukturen'
publication: ACS Photonics
publication_identifier:
issn:
- 2330-4022
- 2330-4022
publication_status: published
publisher: American Chemical Society (ACS)
quality_controlled: '1'
status: public
title: Nonlinear Dielectric Geometric-Phase Metasurface with Simultaneous Structure
and Lattice Symmetry Design
type: journal_article
user_id: '30525'
volume: 10
year: '2023'
...
---
_id: '53543'
author:
- first_name: Fabian
full_name: Winkel, Fabian
last_name: Winkel
- first_name: Peter
full_name: Scholz, Peter
last_name: Scholz
- first_name: Oliver
full_name: Wallscheid, Oliver
id: '11291'
last_name: Wallscheid
orcid: https://orcid.org/0000-0001-9362-8777
- first_name: Joachim
full_name: Böcker, Joachim
id: '66'
last_name: Böcker
orcid: 0000-0002-8480-7295
citation:
ama: Winkel F, Scholz P, Wallscheid O, Böcker J. Reducing Contact Bouncing of a
Relay by Optimizing the Switch Signal During Run-Time. IEEE Transactions on
Automation Science and Engineering. Published online 2023:1-11. doi:10.1109/tase.2023.3322762
apa: Winkel, F., Scholz, P., Wallscheid, O., & Böcker, J. (2023). Reducing Contact
Bouncing of a Relay by Optimizing the Switch Signal During Run-Time. IEEE Transactions
on Automation Science and Engineering, 1–11. https://doi.org/10.1109/tase.2023.3322762
bibtex: '@article{Winkel_Scholz_Wallscheid_Böcker_2023, title={Reducing Contact
Bouncing of a Relay by Optimizing the Switch Signal During Run-Time}, DOI={10.1109/tase.2023.3322762},
journal={IEEE Transactions on Automation Science and Engineering}, publisher={Institute
of Electrical and Electronics Engineers (IEEE)}, author={Winkel, Fabian and Scholz,
Peter and Wallscheid, Oliver and Böcker, Joachim}, year={2023}, pages={1–11} }'
chicago: Winkel, Fabian, Peter Scholz, Oliver Wallscheid, and Joachim Böcker. “Reducing
Contact Bouncing of a Relay by Optimizing the Switch Signal During Run-Time.”
IEEE Transactions on Automation Science and Engineering, 2023, 1–11. https://doi.org/10.1109/tase.2023.3322762.
ieee: 'F. Winkel, P. Scholz, O. Wallscheid, and J. Böcker, “Reducing Contact Bouncing
of a Relay by Optimizing the Switch Signal During Run-Time,” IEEE Transactions
on Automation Science and Engineering, pp. 1–11, 2023, doi: 10.1109/tase.2023.3322762.'
mla: Winkel, Fabian, et al. “Reducing Contact Bouncing of a Relay by Optimizing
the Switch Signal During Run-Time.” IEEE Transactions on Automation Science
and Engineering, Institute of Electrical and Electronics Engineers (IEEE),
2023, pp. 1–11, doi:10.1109/tase.2023.3322762.
short: F. Winkel, P. Scholz, O. Wallscheid, J. Böcker, IEEE Transactions on Automation
Science and Engineering (2023) 1–11.
date_created: 2024-04-17T14:00:22Z
date_updated: 2024-04-17T14:01:41Z
department:
- _id: '52'
doi: 10.1109/tase.2023.3322762
keyword:
- Electrical and Electronic Engineering
- Control and Systems Engineering
language:
- iso: eng
page: 1-11
publication: IEEE Transactions on Automation Science and Engineering
publication_identifier:
issn:
- 1545-5955
- 1558-3783
publication_status: published
publisher: Institute of Electrical and Electronics Engineers (IEEE)
status: public
title: Reducing Contact Bouncing of a Relay by Optimizing the Switch Signal During
Run-Time
type: journal_article
user_id: '66'
year: '2023'
...
---
_id: '36800'
abstract:
- lang: eng
text: "Abstract. The miniaturisation of components leads to new demands on measurement
systems. One of these is the resolution. As a volumetric analysis method and method
of non-destructive testing, industrial X-ray computed\r\ntomography (XCT) has
the ability to measure geometrical features and their corresponding dimensions
without destroying them and can therefore be used for quality assurance. However,
the concept of resolution is not trivial for XCT and has not yet been finally
clarified. In particular, the interface structural resolution, the detectability
of two surfaces facing each other after surface segmentation, faces a lack of
a test specimen, a corresponding\r\nmeasurand and a reliable method. Simulation-based
XCT investigations of a method to determine this type of resolution are presented
in this article using the geometry of a test specimen that contains several radially\r\narranged
holes of the same size. The borehole diameters correspond to the distance between
the holes to investigate the resolvability of surfaces and interfaces. The evaluation
is based on mean and extreme values of grey value\r\nprofiles between the individual
boreholes of the reconstructed volume. It is shown that the geometrical detectability
of the test specimen surface and interface can be extended by a reasonable choice
of the threshold value for\r\nsurface segmentation within a defined interval.
With regard to the resolving capability, a distinction is made between assured
detectability and possible detectability, as well as the threshold value used
when using the ISO50\r\nthreshold for surface segmentation and measurement chain
completion. "
author:
- first_name: Matthias
full_name: Busch, Matthias
last_name: Busch
- first_name: Tino
full_name: Hausotte, Tino
last_name: Hausotte
citation:
ama: Busch M, Hausotte T. Simulation-based investigation of the metrological interface
structural resolution capability of X-ray computed tomography scanners. Journal
of Sensors and Sensor Systems. 2023;12(1):1-8. doi:10.5194/jsss-12-1-2023
apa: Busch, M., & Hausotte, T. (2023). Simulation-based investigation of the
metrological interface structural resolution capability of X-ray computed tomography
scanners. Journal of Sensors and Sensor Systems, 12(1), 1–8. https://doi.org/10.5194/jsss-12-1-2023
bibtex: '@article{Busch_Hausotte_2023, title={Simulation-based investigation of
the metrological interface structural resolution capability of X-ray computed
tomography scanners}, volume={12}, DOI={10.5194/jsss-12-1-2023},
number={1}, journal={Journal of Sensors and Sensor Systems}, publisher={Copernicus
GmbH}, author={Busch, Matthias and Hausotte, Tino}, year={2023}, pages={1–8} }'
chicago: 'Busch, Matthias, and Tino Hausotte. “Simulation-Based Investigation of
the Metrological Interface Structural Resolution Capability of X-Ray Computed
Tomography Scanners.” Journal of Sensors and Sensor Systems 12, no. 1 (2023):
1–8. https://doi.org/10.5194/jsss-12-1-2023.'
ieee: 'M. Busch and T. Hausotte, “Simulation-based investigation of the metrological
interface structural resolution capability of X-ray computed tomography scanners,”
Journal of Sensors and Sensor Systems, vol. 12, no. 1, pp. 1–8, 2023, doi:
10.5194/jsss-12-1-2023.'
mla: Busch, Matthias, and Tino Hausotte. “Simulation-Based Investigation of the
Metrological Interface Structural Resolution Capability of X-Ray Computed Tomography
Scanners.” Journal of Sensors and Sensor Systems, vol. 12, no. 1, Copernicus
GmbH, 2023, pp. 1–8, doi:10.5194/jsss-12-1-2023.
short: M. Busch, T. Hausotte, Journal of Sensors and Sensor Systems 12 (2023) 1–8.
date_created: 2023-01-13T14:37:34Z
date_updated: 2023-01-13T14:40:12Z
department:
- _id: '630'
doi: 10.5194/jsss-12-1-2023
intvolume: ' 12'
issue: '1'
keyword:
- Electrical and Electronic Engineering
- Instrumentation
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://jsss.copernicus.org/articles/12/1/2023/
oa: '1'
page: 1-8
project:
- _id: '130'
grant_number: '418701707'
name: 'TRR 285: TRR 285'
- _id: '133'
name: 'TRR 285 - C: TRR 285 - Project Area C'
- _id: '149'
name: 'TRR 285 – C05: TRR 285 - Subproject C05'
publication: Journal of Sensors and Sensor Systems
publication_identifier:
issn:
- 2194-878X
publication_status: published
publisher: Copernicus GmbH
status: public
title: Simulation-based investigation of the metrological interface structural resolution
capability of X-ray computed tomography scanners
type: journal_article
user_id: '7850'
volume: 12
year: '2023'
...
---
_id: '43456'
author:
- first_name: Anian
full_name: Brosch, Anian
id: '75779'
last_name: Brosch
orcid: 0000-0003-4871-1664
- first_name: Oliver
full_name: Wallscheid, Oliver
id: '11291'
last_name: Wallscheid
orcid: https://orcid.org/0000-0001-9362-8777
- first_name: Joachim
full_name: Böcker, Joachim
id: '66'
last_name: Böcker
orcid: 0000-0002-8480-7295
citation:
ama: Brosch A, Wallscheid O, Böcker J. Time-Optimal Model Predictive Control of
Permanent Magnet Synchronous Motors Considering Current and Torque Constraints.
IEEE Transactions on Power Electronics. Published online 2023:1-14. doi:10.1109/tpel.2023.3265705
apa: Brosch, A., Wallscheid, O., & Böcker, J. (2023). Time-Optimal Model Predictive
Control of Permanent Magnet Synchronous Motors Considering Current and Torque
Constraints. IEEE Transactions on Power Electronics, 1–14. https://doi.org/10.1109/tpel.2023.3265705
bibtex: '@article{Brosch_Wallscheid_Böcker_2023, title={Time-Optimal Model Predictive
Control of Permanent Magnet Synchronous Motors Considering Current and Torque
Constraints}, DOI={10.1109/tpel.2023.3265705},
journal={IEEE Transactions on Power Electronics}, publisher={Institute of Electrical
and Electronics Engineers (IEEE)}, author={Brosch, Anian and Wallscheid, Oliver
and Böcker, Joachim}, year={2023}, pages={1–14} }'
chicago: Brosch, Anian, Oliver Wallscheid, and Joachim Böcker. “Time-Optimal Model
Predictive Control of Permanent Magnet Synchronous Motors Considering Current
and Torque Constraints.” IEEE Transactions on Power Electronics, 2023,
1–14. https://doi.org/10.1109/tpel.2023.3265705.
ieee: 'A. Brosch, O. Wallscheid, and J. Böcker, “Time-Optimal Model Predictive Control
of Permanent Magnet Synchronous Motors Considering Current and Torque Constraints,”
IEEE Transactions on Power Electronics, pp. 1–14, 2023, doi: 10.1109/tpel.2023.3265705.'
mla: Brosch, Anian, et al. “Time-Optimal Model Predictive Control of Permanent Magnet
Synchronous Motors Considering Current and Torque Constraints.” IEEE Transactions
on Power Electronics, Institute of Electrical and Electronics Engineers (IEEE),
2023, pp. 1–14, doi:10.1109/tpel.2023.3265705.
short: A. Brosch, O. Wallscheid, J. Böcker, IEEE Transactions on Power Electronics
(2023) 1–14.
date_created: 2023-04-11T14:19:06Z
date_updated: 2023-04-11T14:22:13Z
department:
- _id: '52'
doi: 10.1109/tpel.2023.3265705
keyword:
- Electrical and Electronic Engineering
language:
- iso: eng
page: 1-14
publication: IEEE Transactions on Power Electronics
publication_identifier:
issn:
- 0885-8993
- 1941-0107
publication_status: published
publisher: Institute of Electrical and Electronics Engineers (IEEE)
status: public
title: Time-Optimal Model Predictive Control of Permanent Magnet Synchronous Motors
Considering Current and Torque Constraints
type: journal_article
user_id: '75779'
year: '2023'
...
---
_id: '44888'
author:
- first_name: Peter
full_name: Lenz, Peter
last_name: Lenz
- first_name: Rolf
full_name: Mahnken, Rolf
id: '335'
last_name: Mahnken
citation:
ama: Lenz P, Mahnken R. Thermo‐chemo‐mechanical modelling of a curing process combined
with mean‐field homogenization methods at large strains. PAMM. 2023;22(1).
doi:10.1002/pamm.202200214
apa: Lenz, P., & Mahnken, R. (2023). Thermo‐chemo‐mechanical modelling of a
curing process combined with mean‐field homogenization methods at large strains.
PAMM, 22(1). https://doi.org/10.1002/pamm.202200214
bibtex: '@article{Lenz_Mahnken_2023, title={Thermo‐chemo‐mechanical modelling of
a curing process combined with mean‐field homogenization methods at large strains},
volume={22}, DOI={10.1002/pamm.202200214},
number={1}, journal={PAMM}, publisher={Wiley}, author={Lenz, Peter and Mahnken,
Rolf}, year={2023} }'
chicago: Lenz, Peter, and Rolf Mahnken. “Thermo‐chemo‐mechanical Modelling of a
Curing Process Combined with Mean‐field Homogenization Methods at Large Strains.”
PAMM 22, no. 1 (2023). https://doi.org/10.1002/pamm.202200214.
ieee: 'P. Lenz and R. Mahnken, “Thermo‐chemo‐mechanical modelling of a curing process
combined with mean‐field homogenization methods at large strains,” PAMM,
vol. 22, no. 1, 2023, doi: 10.1002/pamm.202200214.'
mla: Lenz, Peter, and Rolf Mahnken. “Thermo‐chemo‐mechanical Modelling of a Curing
Process Combined with Mean‐field Homogenization Methods at Large Strains.” PAMM,
vol. 22, no. 1, Wiley, 2023, doi:10.1002/pamm.202200214.
short: P. Lenz, R. Mahnken, PAMM 22 (2023).
date_created: 2023-05-16T12:15:44Z
date_updated: 2023-05-16T12:17:50Z
department:
- _id: '9'
- _id: '154'
- _id: '321'
doi: 10.1002/pamm.202200214
intvolume: ' 22'
issue: '1'
keyword:
- Electrical and Electronic Engineering
- Atomic and Molecular Physics
- and Optics
language:
- iso: eng
publication: PAMM
publication_identifier:
issn:
- 1617-7061
- 1617-7061
publication_status: published
publisher: Wiley
quality_controlled: '1'
status: public
title: Thermo‐chemo‐mechanical modelling of a curing process combined with mean‐field
homogenization methods at large strains
type: journal_article
user_id: '335'
volume: 22
year: '2023'
...
---
_id: '44891'
author:
- first_name: Hendrik
full_name: Westermann, Hendrik
id: '60816'
last_name: Westermann
orcid: 0000-0002-5034-9708
- first_name: Rolf
full_name: Mahnken, Rolf
id: '335'
last_name: Mahnken
citation:
ama: Westermann H, Mahnken R. A thermodynamic framework for the phase‐field approach
considering carbide precipitation during phase transformations. PAMM. 2023;22(1).
doi:10.1002/pamm.202200080
apa: Westermann, H., & Mahnken, R. (2023). A thermodynamic framework for the
phase‐field approach considering carbide precipitation during phase transformations.
PAMM, 22(1). https://doi.org/10.1002/pamm.202200080
bibtex: '@article{Westermann_Mahnken_2023, title={A thermodynamic framework for
the phase‐field approach considering carbide precipitation during phase transformations},
volume={22}, DOI={10.1002/pamm.202200080},
number={1}, journal={PAMM}, publisher={Wiley}, author={Westermann, Hendrik and
Mahnken, Rolf}, year={2023} }'
chicago: Westermann, Hendrik, and Rolf Mahnken. “A Thermodynamic Framework for the
Phase‐field Approach Considering Carbide Precipitation during Phase Transformations.”
PAMM 22, no. 1 (2023). https://doi.org/10.1002/pamm.202200080.
ieee: 'H. Westermann and R. Mahnken, “A thermodynamic framework for the phase‐field
approach considering carbide precipitation during phase transformations,” PAMM,
vol. 22, no. 1, 2023, doi: 10.1002/pamm.202200080.'
mla: Westermann, Hendrik, and Rolf Mahnken. “A Thermodynamic Framework for the Phase‐field
Approach Considering Carbide Precipitation during Phase Transformations.” PAMM,
vol. 22, no. 1, Wiley, 2023, doi:10.1002/pamm.202200080.
short: H. Westermann, R. Mahnken, PAMM 22 (2023).
date_created: 2023-05-16T12:20:19Z
date_updated: 2023-05-16T12:21:15Z
department:
- _id: '9'
- _id: '154'
- _id: '321'
doi: 10.1002/pamm.202200080
intvolume: ' 22'
issue: '1'
keyword:
- Electrical and Electronic Engineering
- Atomic and Molecular Physics
- and Optics
language:
- iso: eng
publication: PAMM
publication_identifier:
issn:
- 1617-7061
- 1617-7061
publication_status: published
publisher: Wiley
quality_controlled: '1'
status: public
title: A thermodynamic framework for the phase‐field approach considering carbide
precipitation during phase transformations
type: journal_article
user_id: '335'
volume: 22
year: '2023'
...
---
_id: '44892'
author:
- first_name: Ayoub
full_name: Hamdoun, Ayoub
last_name: Hamdoun
- first_name: Rolf
full_name: Mahnken, Rolf
id: '335'
last_name: Mahnken
citation:
ama: Hamdoun A, Mahnken R. A finite strain gradient theory for viscoplasticity by
means of micromorphic regularization. PAMM. 2023;22(1). doi:10.1002/pamm.202200074
apa: Hamdoun, A., & Mahnken, R. (2023). A finite strain gradient theory for
viscoplasticity by means of micromorphic regularization. PAMM, 22(1).
https://doi.org/10.1002/pamm.202200074
bibtex: '@article{Hamdoun_Mahnken_2023, title={A finite strain gradient theory for
viscoplasticity by means of micromorphic regularization}, volume={22}, DOI={10.1002/pamm.202200074}, number={1},
journal={PAMM}, publisher={Wiley}, author={Hamdoun, Ayoub and Mahnken, Rolf},
year={2023} }'
chicago: Hamdoun, Ayoub, and Rolf Mahnken. “A Finite Strain Gradient Theory for
Viscoplasticity by Means of Micromorphic Regularization.” PAMM 22, no.
1 (2023). https://doi.org/10.1002/pamm.202200074.
ieee: 'A. Hamdoun and R. Mahnken, “A finite strain gradient theory for viscoplasticity
by means of micromorphic regularization,” PAMM, vol. 22, no. 1, 2023, doi:
10.1002/pamm.202200074.'
mla: Hamdoun, Ayoub, and Rolf Mahnken. “A Finite Strain Gradient Theory for Viscoplasticity
by Means of Micromorphic Regularization.” PAMM, vol. 22, no. 1, Wiley,
2023, doi:10.1002/pamm.202200074.
short: A. Hamdoun, R. Mahnken, PAMM 22 (2023).
date_created: 2023-05-16T12:21:32Z
date_updated: 2023-05-16T12:23:15Z
department:
- _id: '9'
- _id: '154'
- _id: '321'
doi: 10.1002/pamm.202200074
intvolume: ' 22'
issue: '1'
keyword:
- Electrical and Electronic Engineering
- Atomic and Molecular Physics
- and Optics
language:
- iso: eng
publication: PAMM
publication_identifier:
issn:
- 1617-7061
- 1617-7061
publication_status: published
publisher: Wiley
quality_controlled: '1'
status: public
title: A finite strain gradient theory for viscoplasticity by means of micromorphic
regularization
type: journal_article
user_id: '335'
volume: 22
year: '2023'
...
---
_id: '45134'
abstract:
- lang: eng
text: 'The aim of the present study was to investigate if the presence of
anterior cruciate ligament (ACL) injury risk factors depicted in the laboratory
would reflect at-risk patterns in football-specific field data. Twenty-four female
footballers (14.9 ± 0.9 year) performed unanticipated cutting maneuvers in a laboratory
setting and on the football pitch during football-specific exercises (F-EX) and
games (F-GAME). Knee joint moments were collected in the laboratory and grouped
using hierarchical agglomerative clustering. The clusters were used to investigate
the kinematics collected on field through wearable sensors. Three clusters emerged:
Cluster 1 presented the lowest knee moments; Cluster 2 presented high knee extension
but low knee abduction and rotation moments; Cluster 3 presented the highest knee
abduction, extension, and external rotation moments. In F-EX, greater knee abduction
angles were found in Cluster 2 and 3 compared to Cluster 1 (p = 0.007). Cluster
2 showed the lowest knee and hip flexion angles (p < 0.013). Cluster 3 showed
the greatest hip external rotation angles (p = 0.006). In F-GAME, Cluster 3 presented
the greatest knee external rotation and lowest knee flexion angles (p = 0.003).
Clinically relevant differences towards ACL injury identified in the laboratory
reflected at-risk patterns only in part when cutting on the field: in the field,
low-risk players exhibited similar kinematic patterns as the high-risk players.
Therefore, in-lab injury risk screening may lack ecological validity.'
article_number: '2176'
author:
- first_name: Stefano
full_name: Di Paolo, Stefano
last_name: Di Paolo
- first_name: Eline M.
full_name: Nijmeijer, Eline M.
last_name: Nijmeijer
- first_name: Laura
full_name: Bragonzoni, Laura
last_name: Bragonzoni
- first_name: Alli
full_name: Gokeler, Alli
last_name: Gokeler
- first_name: Anne
full_name: Benjaminse, Anne
last_name: Benjaminse
citation:
ama: 'Di Paolo S, Nijmeijer EM, Bragonzoni L, Gokeler A, Benjaminse A. Definition
of High-Risk Motion Patterns for Female ACL Injury Based on Football-Specific
Field Data: A Wearable Sensors Plus Data Mining Approach. Sensors. 2023;23(4).
doi:10.3390/s23042176'
apa: 'Di Paolo, S., Nijmeijer, E. M., Bragonzoni, L., Gokeler, A., & Benjaminse,
A. (2023). Definition of High-Risk Motion Patterns for Female ACL Injury Based
on Football-Specific Field Data: A Wearable Sensors Plus Data Mining Approach.
Sensors, 23(4), Article 2176. https://doi.org/10.3390/s23042176'
bibtex: '@article{Di Paolo_Nijmeijer_Bragonzoni_Gokeler_Benjaminse_2023, title={Definition
of High-Risk Motion Patterns for Female ACL Injury Based on Football-Specific
Field Data: A Wearable Sensors Plus Data Mining Approach}, volume={23}, DOI={10.3390/s23042176}, number={42176},
journal={Sensors}, publisher={MDPI AG}, author={Di Paolo, Stefano and Nijmeijer,
Eline M. and Bragonzoni, Laura and Gokeler, Alli and Benjaminse, Anne}, year={2023}
}'
chicago: 'Di Paolo, Stefano, Eline M. Nijmeijer, Laura Bragonzoni, Alli Gokeler,
and Anne Benjaminse. “Definition of High-Risk Motion Patterns for Female ACL Injury
Based on Football-Specific Field Data: A Wearable Sensors Plus Data Mining Approach.”
Sensors 23, no. 4 (2023). https://doi.org/10.3390/s23042176.'
ieee: 'S. Di Paolo, E. M. Nijmeijer, L. Bragonzoni, A. Gokeler, and A. Benjaminse,
“Definition of High-Risk Motion Patterns for Female ACL Injury Based on Football-Specific
Field Data: A Wearable Sensors Plus Data Mining Approach,” Sensors, vol.
23, no. 4, Art. no. 2176, 2023, doi: 10.3390/s23042176.'
mla: 'Di Paolo, Stefano, et al. “Definition of High-Risk Motion Patterns for Female
ACL Injury Based on Football-Specific Field Data: A Wearable Sensors Plus Data
Mining Approach.” Sensors, vol. 23, no. 4, 2176, MDPI AG, 2023, doi:10.3390/s23042176.'
short: S. Di Paolo, E.M. Nijmeijer, L. Bragonzoni, A. Gokeler, A. Benjaminse, Sensors
23 (2023).
date_created: 2023-05-19T09:09:49Z
date_updated: 2023-05-19T09:13:42Z
department:
- _id: '17'
doi: 10.3390/s23042176
intvolume: ' 23'
issue: '4'
keyword:
- Electrical and Electronic Engineering
- Biochemistry
- Instrumentation
- Atomic and Molecular Physics
- and Optics
- Analytical Chemistry
language:
- iso: eng
publication: Sensors
publication_identifier:
issn:
- 1424-8220
publication_status: published
publisher: MDPI AG
status: public
title: 'Definition of High-Risk Motion Patterns for Female ACL Injury Based on Football-Specific
Field Data: A Wearable Sensors Plus Data Mining Approach'
type: journal_article
user_id: '46'
volume: 23
year: '2023'
...
---
_id: '44890'
author:
- first_name: Arnold
full_name: Tchomgue Simeu, Arnold
id: '83075'
last_name: Tchomgue Simeu
- first_name: Rolf
full_name: Mahnken, Rolf
id: '335'
last_name: Mahnken
citation:
ama: Tchomgue Simeu A, Mahnken R. Goal‐oriented adaptivity based on a model hierarchy
of mean‐field and full‐field homogenization methods in elasto‐plasticity. PAMM.
2023;22(1). doi:10.1002/pamm.202200053
apa: Tchomgue Simeu, A., & Mahnken, R. (2023). Goal‐oriented adaptivity based
on a model hierarchy of mean‐field and full‐field homogenization methods in elasto‐plasticity.
PAMM, 22(1). https://doi.org/10.1002/pamm.202200053
bibtex: '@article{Tchomgue Simeu_Mahnken_2023, title={Goal‐oriented adaptivity based
on a model hierarchy of mean‐field and full‐field homogenization methods in elasto‐plasticity},
volume={22}, DOI={10.1002/pamm.202200053},
number={1}, journal={PAMM}, publisher={Wiley}, author={Tchomgue Simeu, Arnold
and Mahnken, Rolf}, year={2023} }'
chicago: Tchomgue Simeu, Arnold, and Rolf Mahnken. “Goal‐oriented Adaptivity Based
on a Model Hierarchy of Mean‐field and Full‐field Homogenization Methods in Elasto‐plasticity.”
PAMM 22, no. 1 (2023). https://doi.org/10.1002/pamm.202200053.
ieee: 'A. Tchomgue Simeu and R. Mahnken, “Goal‐oriented adaptivity based on a model
hierarchy of mean‐field and full‐field homogenization methods in elasto‐plasticity,”
PAMM, vol. 22, no. 1, 2023, doi: 10.1002/pamm.202200053.'
mla: Tchomgue Simeu, Arnold, and Rolf Mahnken. “Goal‐oriented Adaptivity Based on
a Model Hierarchy of Mean‐field and Full‐field Homogenization Methods in Elasto‐plasticity.”
PAMM, vol. 22, no. 1, Wiley, 2023, doi:10.1002/pamm.202200053.
short: A. Tchomgue Simeu, R. Mahnken, PAMM 22 (2023).
date_created: 2023-05-16T12:18:15Z
date_updated: 2023-05-25T10:02:34Z
department:
- _id: '9'
- _id: '154'
- _id: '321'
doi: 10.1002/pamm.202200053
intvolume: ' 22'
issue: '1'
keyword:
- Electrical and Electronic Engineering
- Atomic and Molecular Physics
- and Optics
language:
- iso: eng
publication: PAMM
publication_identifier:
issn:
- 1617-7061
- 1617-7061
publication_status: published
publisher: Wiley
quality_controlled: '1'
status: public
title: Goal‐oriented adaptivity based on a model hierarchy of mean‐field and full‐field
homogenization methods in elasto‐plasticity
type: journal_article
user_id: '335'
volume: 22
year: '2023'
...
---
_id: '45485'
author:
- first_name: Stephan
full_name: Kruse, Stephan
id: '38254'
last_name: Kruse
- first_name: Laura
full_name: Serino, Laura
id: '88242'
last_name: Serino
- first_name: Patrick Fabian
full_name: Folge, Patrick Fabian
id: '88605'
last_name: Folge
- first_name: Dana
full_name: Echeverria Oviedo, Dana
last_name: Echeverria Oviedo
- first_name: Abhinandan
full_name: Bhattacharjee, Abhinandan
last_name: Bhattacharjee
- first_name: Michael
full_name: Stefszky, Michael
id: '42777'
last_name: Stefszky
- first_name: J. Christoph
full_name: Scheytt, J. Christoph
id: '37144'
last_name: Scheytt
orcid: '0000-0002-5950-6618 '
- first_name: Benjamin
full_name: Brecht, Benjamin
id: '27150'
last_name: Brecht
orcid: '0000-0003-4140-0556 '
- first_name: Christine
full_name: Silberhorn, Christine
id: '26263'
last_name: Silberhorn
citation:
ama: Kruse S, Serino L, Folge PF, et al. A Pulsed Lidar System With Ultimate Quantum
Range Accuracy. IEEE Photonics Technology Letters. 2023;35(14):769-772.
doi:10.1109/lpt.2023.3277515
apa: Kruse, S., Serino, L., Folge, P. F., Echeverria Oviedo, D., Bhattacharjee,
A., Stefszky, M., Scheytt, J. C., Brecht, B., & Silberhorn, C. (2023). A Pulsed
Lidar System With Ultimate Quantum Range Accuracy. IEEE Photonics Technology
Letters, 35(14), 769–772. https://doi.org/10.1109/lpt.2023.3277515
bibtex: '@article{Kruse_Serino_Folge_Echeverria Oviedo_Bhattacharjee_Stefszky_Scheytt_Brecht_Silberhorn_2023,
title={A Pulsed Lidar System With Ultimate Quantum Range Accuracy}, volume={35},
DOI={10.1109/lpt.2023.3277515},
number={14}, journal={IEEE Photonics Technology Letters}, publisher={Institute
of Electrical and Electronics Engineers (IEEE)}, author={Kruse, Stephan and Serino,
Laura and Folge, Patrick Fabian and Echeverria Oviedo, Dana and Bhattacharjee,
Abhinandan and Stefszky, Michael and Scheytt, J. Christoph and Brecht, Benjamin
and Silberhorn, Christine}, year={2023}, pages={769–772} }'
chicago: 'Kruse, Stephan, Laura Serino, Patrick Fabian Folge, Dana Echeverria Oviedo,
Abhinandan Bhattacharjee, Michael Stefszky, J. Christoph Scheytt, Benjamin Brecht,
and Christine Silberhorn. “A Pulsed Lidar System With Ultimate Quantum Range Accuracy.”
IEEE Photonics Technology Letters 35, no. 14 (2023): 769–72. https://doi.org/10.1109/lpt.2023.3277515.'
ieee: 'S. Kruse et al., “A Pulsed Lidar System With Ultimate Quantum Range
Accuracy,” IEEE Photonics Technology Letters, vol. 35, no. 14, pp. 769–772,
2023, doi: 10.1109/lpt.2023.3277515.'
mla: Kruse, Stephan, et al. “A Pulsed Lidar System With Ultimate Quantum Range Accuracy.”
IEEE Photonics Technology Letters, vol. 35, no. 14, Institute of Electrical
and Electronics Engineers (IEEE), 2023, pp. 769–72, doi:10.1109/lpt.2023.3277515.
short: S. Kruse, L. Serino, P.F. Folge, D. Echeverria Oviedo, A. Bhattacharjee,
M. Stefszky, J.C. Scheytt, B. Brecht, C. Silberhorn, IEEE Photonics Technology
Letters 35 (2023) 769–772.
date_created: 2023-06-06T10:09:05Z
date_updated: 2023-06-06T10:13:05Z
department:
- _id: '15'
- _id: '58'
- _id: '623'
- _id: '230'
- _id: '288'
doi: 10.1109/lpt.2023.3277515
intvolume: ' 35'
issue: '14'
keyword:
- Electrical and Electronic Engineering
- Atomic and Molecular Physics
- and Optics
- Electronic
- Optical and Magnetic Materials
language:
- iso: eng
page: 769-772
publication: IEEE Photonics Technology Letters
publication_identifier:
issn:
- 1041-1135
- 1941-0174
publication_status: published
publisher: Institute of Electrical and Electronics Engineers (IEEE)
status: public
title: A Pulsed Lidar System With Ultimate Quantum Range Accuracy
type: journal_article
user_id: '27150'
volume: 35
year: '2023'
...
---
_id: '46147'
author:
- first_name: Anian
full_name: Brosch, Anian
id: '75779'
last_name: Brosch
orcid: 0000-0003-4871-1664
- first_name: Fabio
full_name: Tinazzi, Fabio
last_name: Tinazzi
- first_name: Oliver
full_name: Wallscheid, Oliver
id: '11291'
last_name: Wallscheid
orcid: https://orcid.org/0000-0001-9362-8777
- first_name: Mauro
full_name: Zigliotto, Mauro
last_name: Zigliotto
- first_name: Joachim
full_name: Böcker, Joachim
id: '66'
last_name: Böcker
orcid: 0000-0002-8480-7295
citation:
ama: Brosch A, Tinazzi F, Wallscheid O, Zigliotto M, Böcker J. Finite Set Sensorless
Control With Minimum a Priori Knowledge and Tuning Effort for Interior Permanent
Magnet Synchronous Motors. IEEE Transactions on Power Electronics. Published
online 2023. doi:10.1109/tpel.2023.3294557
apa: Brosch, A., Tinazzi, F., Wallscheid, O., Zigliotto, M., & Böcker, J. (2023).
Finite Set Sensorless Control With Minimum a Priori Knowledge and Tuning Effort
for Interior Permanent Magnet Synchronous Motors. IEEE Transactions on Power
Electronics. https://doi.org/10.1109/tpel.2023.3294557
bibtex: '@article{Brosch_Tinazzi_Wallscheid_Zigliotto_Böcker_2023, title={Finite
Set Sensorless Control With Minimum a Priori Knowledge and Tuning Effort for Interior
Permanent Magnet Synchronous Motors}, DOI={10.1109/tpel.2023.3294557},
journal={IEEE Transactions on Power Electronics}, publisher={Institute of Electrical
and Electronics Engineers (IEEE)}, author={Brosch, Anian and Tinazzi, Fabio and
Wallscheid, Oliver and Zigliotto, Mauro and Böcker, Joachim}, year={2023} }'
chicago: Brosch, Anian, Fabio Tinazzi, Oliver Wallscheid, Mauro Zigliotto, and Joachim
Böcker. “Finite Set Sensorless Control With Minimum a Priori Knowledge and Tuning
Effort for Interior Permanent Magnet Synchronous Motors.” IEEE Transactions
on Power Electronics, 2023. https://doi.org/10.1109/tpel.2023.3294557.
ieee: 'A. Brosch, F. Tinazzi, O. Wallscheid, M. Zigliotto, and J. Böcker, “Finite
Set Sensorless Control With Minimum a Priori Knowledge and Tuning Effort for Interior
Permanent Magnet Synchronous Motors,” IEEE Transactions on Power Electronics,
2023, doi: 10.1109/tpel.2023.3294557.'
mla: Brosch, Anian, et al. “Finite Set Sensorless Control With Minimum a Priori
Knowledge and Tuning Effort for Interior Permanent Magnet Synchronous Motors.”
IEEE Transactions on Power Electronics, Institute of Electrical and Electronics
Engineers (IEEE), 2023, doi:10.1109/tpel.2023.3294557.
short: A. Brosch, F. Tinazzi, O. Wallscheid, M. Zigliotto, J. Böcker, IEEE Transactions
on Power Electronics (2023).
date_created: 2023-07-25T20:33:12Z
date_updated: 2023-07-25T20:34:51Z
department:
- _id: '52'
doi: 10.1109/tpel.2023.3294557
keyword:
- Electrical and Electronic Engineering
language:
- iso: eng
publication: IEEE Transactions on Power Electronics
publication_identifier:
issn:
- 0885-8993
- 1941-0107
publication_status: published
publisher: Institute of Electrical and Electronics Engineers (IEEE)
status: public
title: Finite Set Sensorless Control With Minimum a Priori Knowledge and Tuning Effort
for Interior Permanent Magnet Synchronous Motors
type: journal_article
user_id: '75779'
year: '2023'
...
---
_id: '46213'
author:
- first_name: Daniel
full_name: Weber, Daniel
last_name: Weber
- first_name: Maximilian
full_name: Schenke, Maximilian
last_name: Schenke
- first_name: Oliver
full_name: Wallscheid, Oliver
last_name: Wallscheid
citation:
ama: Weber D, Schenke M, Wallscheid O. Steady-State Error Compensation for Reinforcement
Learning-Based Control of Power Electronic Systems. IEEE Access. 2023;11:76524-76536.
doi:10.1109/access.2023.3297274
apa: Weber, D., Schenke, M., & Wallscheid, O. (2023). Steady-State Error Compensation
for Reinforcement Learning-Based Control of Power Electronic Systems. IEEE
Access, 11, 76524–76536. https://doi.org/10.1109/access.2023.3297274
bibtex: '@article{Weber_Schenke_Wallscheid_2023, title={Steady-State Error Compensation
for Reinforcement Learning-Based Control of Power Electronic Systems}, volume={11},
DOI={10.1109/access.2023.3297274},
journal={IEEE Access}, publisher={Institute of Electrical and Electronics Engineers
(IEEE)}, author={Weber, Daniel and Schenke, Maximilian and Wallscheid, Oliver},
year={2023}, pages={76524–76536} }'
chicago: 'Weber, Daniel, Maximilian Schenke, and Oliver Wallscheid. “Steady-State
Error Compensation for Reinforcement Learning-Based Control of Power Electronic
Systems.” IEEE Access 11 (2023): 76524–36. https://doi.org/10.1109/access.2023.3297274.'
ieee: 'D. Weber, M. Schenke, and O. Wallscheid, “Steady-State Error Compensation
for Reinforcement Learning-Based Control of Power Electronic Systems,” IEEE
Access, vol. 11, pp. 76524–76536, 2023, doi: 10.1109/access.2023.3297274.'
mla: Weber, Daniel, et al. “Steady-State Error Compensation for Reinforcement Learning-Based
Control of Power Electronic Systems.” IEEE Access, vol. 11, Institute of
Electrical and Electronics Engineers (IEEE), 2023, pp. 76524–36, doi:10.1109/access.2023.3297274.
short: D. Weber, M. Schenke, O. Wallscheid, IEEE Access 11 (2023) 76524–76536.
date_created: 2023-07-31T07:04:27Z
date_updated: 2023-07-31T07:04:48Z
department:
- _id: '34'
- _id: '52'
doi: 10.1109/access.2023.3297274
intvolume: ' 11'
keyword:
- General Engineering
- General Materials Science
- General Computer Science
- Electrical and Electronic Engineering
language:
- iso: eng
page: 76524-76536
publication: IEEE Access
publication_identifier:
issn:
- 2169-3536
publication_status: published
publisher: Institute of Electrical and Electronics Engineers (IEEE)
status: public
title: Steady-State Error Compensation for Reinforcement Learning-Based Control of
Power Electronic Systems
type: journal_article
user_id: '24041'
volume: 11
year: '2023'
...
---
_id: '46517'
author:
- first_name: Abdullah Fathi
full_name: Ahmed, Abdullah Fathi
last_name: Ahmed
- first_name: Mohamed Ahmed
full_name: Sherif, Mohamed Ahmed
last_name: Sherif
- first_name: Axel-Cyrille Ngonga
full_name: Ngomo, Axel-Cyrille Ngonga
last_name: Ngomo
citation:
ama: 'Ahmed AF, Sherif MA, Ngomo A-CN. NELLIE: Never-Ending Linking for Linked Open
Data. IEEE Access. Published online 2023:1-1. doi:10.1109/access.2023.3300694'
apa: 'Ahmed, A. F., Sherif, M. A., & Ngomo, A.-C. N. (2023). NELLIE: Never-Ending
Linking for Linked Open Data. IEEE Access, 1–1. https://doi.org/10.1109/access.2023.3300694'
bibtex: '@article{Ahmed_Sherif_Ngomo_2023, title={NELLIE: Never-Ending Linking for
Linked Open Data}, DOI={10.1109/access.2023.3300694},
journal={IEEE Access}, publisher={Institute of Electrical and Electronics Engineers
(IEEE)}, author={Ahmed, Abdullah Fathi and Sherif, Mohamed Ahmed and Ngomo, Axel-Cyrille
Ngonga}, year={2023}, pages={1–1} }'
chicago: 'Ahmed, Abdullah Fathi, Mohamed Ahmed Sherif, and Axel-Cyrille Ngonga Ngomo.
“NELLIE: Never-Ending Linking for Linked Open Data.” IEEE Access, 2023,
1–1. https://doi.org/10.1109/access.2023.3300694.'
ieee: 'A. F. Ahmed, M. A. Sherif, and A.-C. N. Ngomo, “NELLIE: Never-Ending Linking
for Linked Open Data,” IEEE Access, pp. 1–1, 2023, doi: 10.1109/access.2023.3300694.'
mla: 'Ahmed, Abdullah Fathi, et al. “NELLIE: Never-Ending Linking for Linked Open
Data.” IEEE Access, Institute of Electrical and Electronics Engineers (IEEE),
2023, pp. 1–1, doi:10.1109/access.2023.3300694.'
short: A.F. Ahmed, M.A. Sherif, A.-C.N. Ngomo, IEEE Access (2023) 1–1.
date_created: 2023-08-16T08:57:39Z
date_updated: 2023-08-16T09:03:52Z
doi: 10.1109/access.2023.3300694
keyword:
- General Engineering
- General Materials Science
- General Computer Science
- Electrical and Electronic Engineering
page: 1-1
publication: IEEE Access
publication_identifier:
issn:
- 2169-3536
publication_status: published
publisher: Institute of Electrical and Electronics Engineers (IEEE)
status: public
title: 'NELLIE: Never-Ending Linking for Linked Open Data'
type: journal_article
user_id: '67234'
year: '2023'
...
---
_id: '46813'
abstract:
- lang: eng
text: Modelling of dynamic systems plays an important role in many engineering disciplines.
Two different approaches are physical modelling and data‐driven modelling, both
of which have their respective advantages and disadvantages. By combining these
two approaches, hybrid models can be created in which the respective disadvantages
are mitigated, with discrepancy models being a particular subclass. Here, the
basic system behaviour is described physically, that is, in the form of differential
equations. Inaccuracies resulting from insufficient modelling or numerics lead
to a discrepancy between the measurements and the model, which can be compensated
by a data‐driven error correction term. Since discrepancy methods still require
a large amount of measurement data, this paper investigates the extent to which
a single discrepancy model can be trained for a physical model with additional
parameter dependencies without the need for retraining. As an example, a damped
electromagnetic oscillating circuit is used. The physical model is realised by
a differential equation describing the electric current, considering only inductance
and capacitance; dissipation due to resistance is neglected. This creates a discrepancy
between measurement and model, which is corrected by a data‐driven model. In the
experiments, the inductance and the capacity are varied. It is found that the
same data‐driven model can only be used if additional parametric dependencies
in the data‐driven term are considered as well.
author:
- first_name: Meike Claudia
full_name: Wohlleben, Meike Claudia
id: '43991'
last_name: Wohlleben
orcid: 0009-0009-9767-7168
- first_name: Lars
full_name: Muth, Lars
id: '77313'
last_name: Muth
orcid: 0000-0002-2938-5616
- first_name: Sebastian
full_name: Peitz, Sebastian
id: '47427'
last_name: Peitz
orcid: 0000-0002-3389-793X
- first_name: Walter
full_name: Sextro, Walter
id: '21220'
last_name: Sextro
citation:
ama: 'Wohlleben MC, Muth L, Peitz S, Sextro W. Transferability of a discrepancy
model for the dynamics of electromagnetic oscillating circuits. In: Proceedings
in Applied Mathematics and Mechanics. Wiley; 2023. doi:10.1002/pamm.202300039'
apa: Wohlleben, M. C., Muth, L., Peitz, S., & Sextro, W. (2023). Transferability
of a discrepancy model for the dynamics of electromagnetic oscillating circuits.
Proceedings in Applied Mathematics and Mechanics. https://doi.org/10.1002/pamm.202300039
bibtex: '@inproceedings{Wohlleben_Muth_Peitz_Sextro_2023, title={Transferability
of a discrepancy model for the dynamics of electromagnetic oscillating circuits},
DOI={10.1002/pamm.202300039},
booktitle={Proceedings in Applied Mathematics and Mechanics}, publisher={Wiley},
author={Wohlleben, Meike Claudia and Muth, Lars and Peitz, Sebastian and Sextro,
Walter}, year={2023} }'
chicago: Wohlleben, Meike Claudia, Lars Muth, Sebastian Peitz, and Walter Sextro.
“Transferability of a Discrepancy Model for the Dynamics of Electromagnetic Oscillating
Circuits.” In Proceedings in Applied Mathematics and Mechanics. Wiley,
2023. https://doi.org/10.1002/pamm.202300039.
ieee: 'M. C. Wohlleben, L. Muth, S. Peitz, and W. Sextro, “Transferability of a
discrepancy model for the dynamics of electromagnetic oscillating circuits,” 2023,
doi: 10.1002/pamm.202300039.'
mla: Wohlleben, Meike Claudia, et al. “Transferability of a Discrepancy Model for
the Dynamics of Electromagnetic Oscillating Circuits.” Proceedings in Applied
Mathematics and Mechanics, Wiley, 2023, doi:10.1002/pamm.202300039.
short: 'M.C. Wohlleben, L. Muth, S. Peitz, W. Sextro, in: Proceedings in Applied
Mathematics and Mechanics, Wiley, 2023.'
date_created: 2023-09-06T05:18:05Z
date_updated: 2023-09-21T14:47:20Z
department:
- _id: '655'
- _id: '151'
doi: 10.1002/pamm.202300039
keyword:
- Electrical and Electronic Engineering
- Atomic and Molecular Physics
- and Optics
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://onlinelibrary.wiley.com/doi/epdf/10.1002/pamm.202300039
oa: '1'
publication: Proceedings in Applied Mathematics and Mechanics
publication_identifier:
issn:
- 1617-7061
- 1617-7061
publication_status: published
publisher: Wiley
quality_controlled: '1'
status: public
title: Transferability of a discrepancy model for the dynamics of electromagnetic
oscillating circuits
type: conference
user_id: '77313'
year: '2023'
...
---
_id: '44312'
abstract:
- lang: eng
text: "Zusammenfassung\r\n Aufgrund
aktueller Transformationsprozesse kommt der automatisierten und ressourceneffizienten
Fertigung hochfester Leichtbauteile eine steigende Bedeutung zu, beispielsweise
im Flugzeug- und Fahrzeugbau. Für kleine Losgrößen bietet sich hier insbesondere
das Fertigungsverfahren des Drückwalzens an. Der konventionelle, industriell genutzte
Drückwalzprozess stößt allerdings aufgrund der Prozesskomplexität hinsichtlich
der Reproduzierbarkeit an seine Grenzen. Dies wird in der Praxis teilweise durch
personengebundenes Erfahrungswissen kompensiert. Auch ist es nicht möglich, Bauteileigenschaften
definiert einzustellen. Aus diesem Grund bietet der Einsatz einer neuartigen Eigenschaftsregelung
Chancen zur Weiterentwicklung des Fertigungsprozesses und die Möglichkeit zur
Prozessautomatisierung. Hier werden die Werkzeugbahnen abhängig einer Online-Eigenschaftsmessung
über eine zusätzliche Reglerkaskade manipuliert. Die Entwicklung einer solchen
Eigenschaftsregelung erfordert den Einsatz geeigneter, modellbasierter Entwurfsmethoden.
In diesem Beitrag wird daher ein regelungstechnisches Systemmodell für das Drückwalzen
metastabiler austenitischer Edelstähle vorgestellt. Das Simulationsmodell weist
aufgrund seiner Echtzeitfähigkeit neben dem Einsatz als reines Entwurfsmodell
weitere Nutzungsmöglichkeiten z.B. in Beobachtern auf und grenzt sich somit von
domänenspezifischen Simulationstools wie der FEM ab."
author:
- first_name: Lukas
full_name: Kersting, Lukas
last_name: Kersting
- first_name: Bahman
full_name: Arian, Bahman
id: '36287'
last_name: Arian
- first_name: Julian
full_name: Rozo Vasquez, Julian
last_name: Rozo Vasquez
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
- first_name: Werner
full_name: Homberg, Werner
id: '233'
last_name: Homberg
- first_name: Frank
full_name: Walther, Frank
last_name: Walther
citation:
ama: Kersting L, Arian B, Rozo Vasquez J, Trächtler A, Homberg W, Walther F. Echtzeitfähige
Modellierung eines innovativen Drückwalzprozesses für die eigenschaftsgeregelte
Bauteilfertigung. at - Automatisierungstechnik. 2023;71(1):68-81. doi:10.1515/auto-2022-0106
apa: Kersting, L., Arian, B., Rozo Vasquez, J., Trächtler, A., Homberg, W., &
Walther, F. (2023). Echtzeitfähige Modellierung eines innovativen Drückwalzprozesses
für die eigenschaftsgeregelte Bauteilfertigung. At - Automatisierungstechnik,
71(1), 68–81. https://doi.org/10.1515/auto-2022-0106
bibtex: '@article{Kersting_Arian_Rozo Vasquez_Trächtler_Homberg_Walther_2023, title={Echtzeitfähige
Modellierung eines innovativen Drückwalzprozesses für die eigenschaftsgeregelte
Bauteilfertigung}, volume={71}, DOI={10.1515/auto-2022-0106},
number={1}, journal={at - Automatisierungstechnik}, publisher={Walter de Gruyter
GmbH}, author={Kersting, Lukas and Arian, Bahman and Rozo Vasquez, Julian and
Trächtler, Ansgar and Homberg, Werner and Walther, Frank}, year={2023}, pages={68–81}
}'
chicago: 'Kersting, Lukas, Bahman Arian, Julian Rozo Vasquez, Ansgar Trächtler,
Werner Homberg, and Frank Walther. “Echtzeitfähige Modellierung Eines Innovativen
Drückwalzprozesses Für Die Eigenschaftsgeregelte Bauteilfertigung.” At - Automatisierungstechnik
71, no. 1 (2023): 68–81. https://doi.org/10.1515/auto-2022-0106.'
ieee: 'L. Kersting, B. Arian, J. Rozo Vasquez, A. Trächtler, W. Homberg, and F.
Walther, “Echtzeitfähige Modellierung eines innovativen Drückwalzprozesses für
die eigenschaftsgeregelte Bauteilfertigung,” at - Automatisierungstechnik,
vol. 71, no. 1, pp. 68–81, 2023, doi: 10.1515/auto-2022-0106.'
mla: Kersting, Lukas, et al. “Echtzeitfähige Modellierung Eines Innovativen Drückwalzprozesses
Für Die Eigenschaftsgeregelte Bauteilfertigung.” At - Automatisierungstechnik,
vol. 71, no. 1, Walter de Gruyter GmbH, 2023, pp. 68–81, doi:10.1515/auto-2022-0106.
short: L. Kersting, B. Arian, J. Rozo Vasquez, A. Trächtler, W. Homberg, F. Walther,
At - Automatisierungstechnik 71 (2023) 68–81.
date_created: 2023-05-02T09:35:01Z
date_updated: 2023-09-25T10:08:25Z
department:
- _id: '156'
- _id: '241'
- _id: '153'
doi: 10.1515/auto-2022-0106
intvolume: ' 71'
issue: '1'
keyword:
- Electrical and Electronic Engineering
- Computer Science Applications
- Control and Systems Engineering
language:
- iso: eng
page: 68-81
publication: at - Automatisierungstechnik
publication_identifier:
issn:
- 0178-2312
- 2196-677X
publication_status: published
publisher: Walter de Gruyter GmbH
quality_controlled: '1'
status: public
title: Echtzeitfähige Modellierung eines innovativen Drückwalzprozesses für die eigenschaftsgeregelte
Bauteilfertigung
type: journal_article
user_id: '552'
volume: 71
year: '2023'
...
---
_id: '44081'
article_number: '020306'
author:
- first_name: Laura
full_name: Serino, Laura
id: '88242'
last_name: Serino
- first_name: Jano
full_name: Gil López, Jano
id: '51223'
last_name: Gil López
- first_name: Michael
full_name: Stefszky, Michael
id: '42777'
last_name: Stefszky
- first_name: Raimund
full_name: Ricken, Raimund
last_name: Ricken
- first_name: Christof
full_name: Eigner, Christof
id: '13244'
last_name: Eigner
orcid: https://orcid.org/0000-0002-5693-3083
- first_name: Benjamin
full_name: Brecht, Benjamin
id: '27150'
last_name: Brecht
orcid: '0000-0003-4140-0556 '
- first_name: Christine
full_name: Silberhorn, Christine
id: '26263'
last_name: Silberhorn
citation:
ama: Serino L, Gil López J, Stefszky M, et al. Realization of a Multi-Output Quantum
Pulse Gate for Decoding High-Dimensional Temporal Modes of Single-Photon States.
PRX Quantum. 2023;4(2). doi:10.1103/prxquantum.4.020306
apa: Serino, L., Gil López, J., Stefszky, M., Ricken, R., Eigner, C., Brecht, B.,
& Silberhorn, C. (2023). Realization of a Multi-Output Quantum Pulse Gate
for Decoding High-Dimensional Temporal Modes of Single-Photon States. PRX Quantum,
4(2), Article 020306. https://doi.org/10.1103/prxquantum.4.020306
bibtex: '@article{Serino_Gil López_Stefszky_Ricken_Eigner_Brecht_Silberhorn_2023,
title={Realization of a Multi-Output Quantum Pulse Gate for Decoding High-Dimensional
Temporal Modes of Single-Photon States}, volume={4}, DOI={10.1103/prxquantum.4.020306},
number={2020306}, journal={PRX Quantum}, publisher={American Physical Society
(APS)}, author={Serino, Laura and Gil López, Jano and Stefszky, Michael and Ricken,
Raimund and Eigner, Christof and Brecht, Benjamin and Silberhorn, Christine},
year={2023} }'
chicago: Serino, Laura, Jano Gil López, Michael Stefszky, Raimund Ricken, Christof
Eigner, Benjamin Brecht, and Christine Silberhorn. “Realization of a Multi-Output
Quantum Pulse Gate for Decoding High-Dimensional Temporal Modes of Single-Photon
States.” PRX Quantum 4, no. 2 (2023). https://doi.org/10.1103/prxquantum.4.020306.
ieee: 'L. Serino et al., “Realization of a Multi-Output Quantum Pulse Gate
for Decoding High-Dimensional Temporal Modes of Single-Photon States,” PRX
Quantum, vol. 4, no. 2, Art. no. 020306, 2023, doi: 10.1103/prxquantum.4.020306.'
mla: Serino, Laura, et al. “Realization of a Multi-Output Quantum Pulse Gate for
Decoding High-Dimensional Temporal Modes of Single-Photon States.” PRX Quantum,
vol. 4, no. 2, 020306, American Physical Society (APS), 2023, doi:10.1103/prxquantum.4.020306.
short: L. Serino, J. Gil López, M. Stefszky, R. Ricken, C. Eigner, B. Brecht, C.
Silberhorn, PRX Quantum 4 (2023).
date_created: 2023-04-20T12:38:23Z
date_updated: 2025-12-18T16:15:18Z
department:
- _id: '288'
- _id: '623'
- _id: '15'
doi: 10.1103/prxquantum.4.020306
intvolume: ' 4'
issue: '2'
keyword:
- General Physics and Astronomy
- Mathematical Physics
- Applied Mathematics
- Electronic
- Optical and Magnetic Materials
- Electrical and Electronic Engineering
- General Computer Science
language:
- iso: eng
publication: PRX Quantum
publication_identifier:
issn:
- 2691-3399
publication_status: published
publisher: American Physical Society (APS)
status: public
title: Realization of a Multi-Output Quantum Pulse Gate for Decoding High-Dimensional
Temporal Modes of Single-Photon States
type: journal_article
user_id: '27150'
volume: 4
year: '2023'
...
---
_id: '46863'
author:
- first_name: Maximilian
full_name: Schenke, Maximilian
id: '52638'
last_name: Schenke
orcid: 0000-0001-5427-9527
- first_name: Barnabas
full_name: Haucke-Korber, Barnabas
id: '93461'
last_name: Haucke-Korber
orcid: 0000-0003-0862-2069
- first_name: Oliver
full_name: Wallscheid, Oliver
id: '11291'
last_name: Wallscheid
orcid: https://orcid.org/0000-0001-9362-8777
citation:
ama: Schenke M, Haucke-Korber B, Wallscheid O. Finite-Set Direct Torque Control
via Edge Computing-Assisted Safe Reinforcement Learning for a Permanent Magnet
Synchronous Motor. IEEE Transactions on Power Electronics. Published online
2023:1-16. doi:10.1109/tpel.2023.3303651
apa: Schenke, M., Haucke-Korber, B., & Wallscheid, O. (2023). Finite-Set Direct
Torque Control via Edge Computing-Assisted Safe Reinforcement Learning for a Permanent
Magnet Synchronous Motor. IEEE Transactions on Power Electronics, 1–16.
https://doi.org/10.1109/tpel.2023.3303651
bibtex: '@article{Schenke_Haucke-Korber_Wallscheid_2023, title={Finite-Set Direct
Torque Control via Edge Computing-Assisted Safe Reinforcement Learning for a Permanent
Magnet Synchronous Motor}, DOI={10.1109/tpel.2023.3303651},
journal={IEEE Transactions on Power Electronics}, publisher={Institute of Electrical
and Electronics Engineers (IEEE)}, author={Schenke, Maximilian and Haucke-Korber,
Barnabas and Wallscheid, Oliver}, year={2023}, pages={1–16} }'
chicago: Schenke, Maximilian, Barnabas Haucke-Korber, and Oliver Wallscheid. “Finite-Set
Direct Torque Control via Edge Computing-Assisted Safe Reinforcement Learning
for a Permanent Magnet Synchronous Motor.” IEEE Transactions on Power Electronics,
2023, 1–16. https://doi.org/10.1109/tpel.2023.3303651.
ieee: 'M. Schenke, B. Haucke-Korber, and O. Wallscheid, “Finite-Set Direct Torque
Control via Edge Computing-Assisted Safe Reinforcement Learning for a Permanent
Magnet Synchronous Motor,” IEEE Transactions on Power Electronics, pp.
1–16, 2023, doi: 10.1109/tpel.2023.3303651.'
mla: Schenke, Maximilian, et al. “Finite-Set Direct Torque Control via Edge Computing-Assisted
Safe Reinforcement Learning for a Permanent Magnet Synchronous Motor.” IEEE
Transactions on Power Electronics, Institute of Electrical and Electronics
Engineers (IEEE), 2023, pp. 1–16, doi:10.1109/tpel.2023.3303651.
short: M. Schenke, B. Haucke-Korber, O. Wallscheid, IEEE Transactions on Power Electronics
(2023) 1–16.
date_created: 2023-09-07T12:08:05Z
date_updated: 2025-12-19T12:44:23Z
department:
- _id: '52'
doi: 10.1109/tpel.2023.3303651
keyword:
- Electrical and Electronic Engineering
language:
- iso: eng
page: 1-16
publication: IEEE Transactions on Power Electronics
publication_identifier:
issn:
- 0885-8993
- 1941-0107
publication_status: published
publisher: Institute of Electrical and Electronics Engineers (IEEE)
status: public
title: Finite-Set Direct Torque Control via Edge Computing-Assisted Safe Reinforcement
Learning for a Permanent Magnet Synchronous Motor
type: journal_article
user_id: '93461'
year: '2023'
...
---
_id: '45859'
abstract:
- lang: eng
text: Sport-related concussions (SRC) are characterized by impaired autonomic
control. Heart rate variability (HRV) offers easily obtainable diagnostic approaches
to SRC-associated dysautonomia, but studies investigating HRV during sleep, a
crucial time for post-traumatic cerebral regeneration, are relatively sparse.
The aim of this study was to assess nocturnal HRV in athletes during their return
to sports (RTS) after SRC in their home environment using wireless wrist sensors
(E4, Empatica, Milan, Italy) and to explore possible relations with clinical concussion-associated
sleep symptoms. Eighteen SRC athletes wore a wrist sensor obtaining photoplethysmographic
data at night during RTS as well as one night after full clinical recovery post
RTS (>3 weeks). Nocturnal heart rate and parasympathetic activity of HRV (RMSSD)
were calculated and compared using the Mann–Whitney U Test to values of eighteen;
matched by sex, age, sport, and expertise, control athletes underwent the identical
protocol. During RTS, nocturnal RMSSD of SRC athletes (Mdn = 77.74 ms) showed
a trend compared to controls (Mdn = 95.68 ms, p = 0.021, r = −0.382, p adjusted
using false discovery rate = 0.126) and positively correlated to “drowsiness”
(r = 0.523, p = 0.023, p adjusted = 0.046). Post RTS, no differences in RMSSD
between groups were detected. The presented findings in nocturnal cardiac parasympathetic
activity during nights of RTS in SRC athletes might be a result of concussion,
although its relation to recovery still needs to be elucidated. Utilization of
wireless sensors and wearable technologies in home-based settings offer a possibility
to obtain helpful objective data in the management of SRC.
article_number: '4190'
author:
- first_name: Anne Carina
full_name: Delling, Anne Carina
last_name: Delling
- first_name: Rasmus
full_name: Jakobsmeyer, Rasmus
id: '9583'
last_name: Jakobsmeyer
orcid: 0000-0002-9385-0834
- first_name: Jessica
full_name: Coenen, Jessica
last_name: Coenen
- first_name: Nele
full_name: Christiansen, Nele
last_name: Christiansen
- first_name: Claus
full_name: Reinsberger, Claus
id: '48978'
last_name: Reinsberger
citation:
ama: Delling AC, Jakobsmeyer R, Coenen J, Christiansen N, Reinsberger C. Home-Based
Measurements of Nocturnal Cardiac Parasympathetic Activity in Athletes during
Return to Sport after Sport-Related Concussion. Sensors. 2023;23(9). doi:10.3390/s23094190
apa: Delling, A. C., Jakobsmeyer, R., Coenen, J., Christiansen, N., & Reinsberger,
C. (2023). Home-Based Measurements of Nocturnal Cardiac Parasympathetic Activity
in Athletes during Return to Sport after Sport-Related Concussion. Sensors,
23(9), Article 4190. https://doi.org/10.3390/s23094190
bibtex: '@article{Delling_Jakobsmeyer_Coenen_Christiansen_Reinsberger_2023, title={Home-Based
Measurements of Nocturnal Cardiac Parasympathetic Activity in Athletes during
Return to Sport after Sport-Related Concussion}, volume={23}, DOI={10.3390/s23094190},
number={94190}, journal={Sensors}, publisher={MDPI AG}, author={Delling, Anne
Carina and Jakobsmeyer, Rasmus and Coenen, Jessica and Christiansen, Nele and
Reinsberger, Claus}, year={2023} }'
chicago: Delling, Anne Carina, Rasmus Jakobsmeyer, Jessica Coenen, Nele Christiansen,
and Claus Reinsberger. “Home-Based Measurements of Nocturnal Cardiac Parasympathetic
Activity in Athletes during Return to Sport after Sport-Related Concussion.” Sensors
23, no. 9 (2023). https://doi.org/10.3390/s23094190.
ieee: 'A. C. Delling, R. Jakobsmeyer, J. Coenen, N. Christiansen, and C. Reinsberger,
“Home-Based Measurements of Nocturnal Cardiac Parasympathetic Activity in Athletes
during Return to Sport after Sport-Related Concussion,” Sensors, vol. 23,
no. 9, Art. no. 4190, 2023, doi: 10.3390/s23094190.'
mla: Delling, Anne Carina, et al. “Home-Based Measurements of Nocturnal Cardiac
Parasympathetic Activity in Athletes during Return to Sport after Sport-Related
Concussion.” Sensors, vol. 23, no. 9, 4190, MDPI AG, 2023, doi:10.3390/s23094190.
short: A.C. Delling, R. Jakobsmeyer, J. Coenen, N. Christiansen, C. Reinsberger,
Sensors 23 (2023).
date_created: 2023-07-04T11:30:24Z
date_updated: 2025-08-28T13:41:09Z
department:
- _id: '35'
- _id: '176'
doi: 10.3390/s23094190
intvolume: ' 23'
issue: '9'
keyword:
- Electrical and Electronic Engineering
- Biochemistry
- Instrumentation
- Atomic and Molecular Physics
- and Optics
- Analytical Chemistry
language:
- iso: eng
publication: Sensors
publication_identifier:
issn:
- 1424-8220
publication_status: published
publisher: MDPI AG
status: public
title: Home-Based Measurements of Nocturnal Cardiac Parasympathetic Activity in Athletes
during Return to Sport after Sport-Related Concussion
type: journal_article
user_id: '9583'
volume: 23
year: '2023'
...
---
_id: '30195'
abstract:
- lang: eng
text: While plasmonic particles can provide optical resonances in a wide spectral
range from the lower visible up to the near-infrared, often, symmetry effects
are utilized to obtain particular optical responses. By breaking certain spatial
symmetries, chiral structures arise and provide robust chiroptical responses to
these plasmonic resonances. Here, we observe strong chiroptical responses in the
linear and nonlinear optical regime for chiral L-handed helicoid-III nanoparticles
and quantify them by means of an asymmetric factor, the so-called g-factor. We
calculate the linear optical g-factors for two distinct chiroptical resonances
to −0.12 and –0.43 and the nonlinear optical g-factors to −1.45 and −1.63. The
results demonstrate that the chirality of the helicoid-III nanoparticles is strongly
enhanced in the nonlinear regime.
article_type: original
author:
- first_name: Florian
full_name: Spreyer, Florian
last_name: Spreyer
- first_name: Jungho
full_name: Mun, Jungho
last_name: Mun
- first_name: Hyeohn
full_name: Kim, Hyeohn
last_name: Kim
- first_name: Ryeong Myeong
full_name: Kim, Ryeong Myeong
last_name: Kim
- first_name: Ki Tae
full_name: Nam, Ki Tae
last_name: Nam
- first_name: Junsuk
full_name: Rho, Junsuk
last_name: Rho
- first_name: Thomas
full_name: Zentgraf, Thomas
id: '30525'
last_name: Zentgraf
orcid: 0000-0002-8662-1101
citation:
ama: Spreyer F, Mun J, Kim H, et al. Second Harmonic Optical Circular Dichroism
of Plasmonic Chiral Helicoid-III Nanoparticles. ACS Photonics. 2022;9(3):784–792.
doi:10.1021/acsphotonics.1c00882
apa: Spreyer, F., Mun, J., Kim, H., Kim, R. M., Nam, K. T., Rho, J., & Zentgraf,
T. (2022). Second Harmonic Optical Circular Dichroism of Plasmonic Chiral Helicoid-III
Nanoparticles. ACS Photonics, 9(3), 784–792. https://doi.org/10.1021/acsphotonics.1c00882
bibtex: '@article{Spreyer_Mun_Kim_Kim_Nam_Rho_Zentgraf_2022, title={Second Harmonic
Optical Circular Dichroism of Plasmonic Chiral Helicoid-III Nanoparticles}, volume={9},
DOI={10.1021/acsphotonics.1c00882},
number={3}, journal={ACS Photonics}, publisher={American Chemical Society (ACS)},
author={Spreyer, Florian and Mun, Jungho and Kim, Hyeohn and Kim, Ryeong Myeong
and Nam, Ki Tae and Rho, Junsuk and Zentgraf, Thomas}, year={2022}, pages={784–792}
}'
chicago: 'Spreyer, Florian, Jungho Mun, Hyeohn Kim, Ryeong Myeong Kim, Ki Tae Nam,
Junsuk Rho, and Thomas Zentgraf. “Second Harmonic Optical Circular Dichroism of
Plasmonic Chiral Helicoid-III Nanoparticles.” ACS Photonics 9, no. 3 (2022):
784–792. https://doi.org/10.1021/acsphotonics.1c00882.'
ieee: 'F. Spreyer et al., “Second Harmonic Optical Circular Dichroism of
Plasmonic Chiral Helicoid-III Nanoparticles,” ACS Photonics, vol. 9, no.
3, pp. 784–792, 2022, doi: 10.1021/acsphotonics.1c00882.'
mla: Spreyer, Florian, et al. “Second Harmonic Optical Circular Dichroism of Plasmonic
Chiral Helicoid-III Nanoparticles.” ACS Photonics, vol. 9, no. 3, American
Chemical Society (ACS), 2022, pp. 784–792, doi:10.1021/acsphotonics.1c00882.
short: F. Spreyer, J. Mun, H. Kim, R.M. Kim, K.T. Nam, J. Rho, T. Zentgraf, ACS
Photonics 9 (2022) 784–792.
date_created: 2022-03-03T07:18:18Z
date_updated: 2022-03-21T07:48:27Z
department:
- _id: '15'
- _id: '230'
- _id: '289'
- _id: '623'
doi: 10.1021/acsphotonics.1c00882
external_id:
arxiv:
- arXiv:2202.13594
intvolume: ' 9'
issue: '3'
keyword:
- Electrical and Electronic Engineering
- Atomic and Molecular Physics
- and Optics
- Biotechnology
- Electronic
- Optical and Magnetic Materials
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://pubs.acs.org/doi/full/10.1021/acsphotonics.1c00882
oa: '1'
page: 784–792
publication: ACS Photonics
publication_identifier:
issn:
- 2330-4022
- 2330-4022
publication_status: published
publisher: American Chemical Society (ACS)
quality_controlled: '1'
related_material:
link:
- relation: research_paper
url: https://pubs.acs.org/doi/full/10.1021/acsphotonics.1c00882
status: public
title: Second Harmonic Optical Circular Dichroism of Plasmonic Chiral Helicoid-III
Nanoparticles
type: journal_article
user_id: '30525'
volume: 9
year: '2022'
...
---
_id: '34221'
abstract:
- lang: eng
text: Unter dem Begriff der Auflösung wird für gewöhnlich das kleinste messbare
Merkmal eines Messsystems verstanden. In der dimensionellen Computertomografie
hingegen haben sich in den vergangenen Jahren mehrere Auflösungskonzepte etabliert,
die aufgrund der fehlenden Normung zueinander im Kontrast stehen. In diesem Beitrag
werden die drei häufigsten Konzepte, die Voxelgröße, die Ortsauflösung und die
metrologische Strukturauflösung in Kürze vorgestellt. Anschließend wird eine Abgrenzung
zwischen den Konzepten getroffen und ein Integration der bestehenden Konzepte
in ein gemeinsames Amplituden-Wellenlängen Diagramm diskutiert.
author:
- first_name: Felix
full_name: Binder, Felix
last_name: Binder
- first_name: Tino
full_name: Hausotte, Tino
last_name: Hausotte
citation:
ama: Binder F, Hausotte T. Über die Abgrenzung von Auflösungskonzepten in der industriellen
Computertomografie. tm - Technisches Messen. 2022;89(s1):20-24. doi:10.1515/teme-2022-0065
apa: Binder, F., & Hausotte, T. (2022). Über die Abgrenzung von Auflösungskonzepten
in der industriellen Computertomografie. Tm - Technisches Messen, 89(s1),
20–24. https://doi.org/10.1515/teme-2022-0065
bibtex: '@article{Binder_Hausotte_2022, title={Über die Abgrenzung von Auflösungskonzepten
in der industriellen Computertomografie}, volume={89}, DOI={10.1515/teme-2022-0065},
number={s1}, journal={tm - Technisches Messen}, publisher={Walter de Gruyter GmbH},
author={Binder, Felix and Hausotte, Tino}, year={2022}, pages={20–24} }'
chicago: 'Binder, Felix, and Tino Hausotte. “Über Die Abgrenzung von Auflösungskonzepten
in Der Industriellen Computertomografie.” Tm - Technisches Messen 89, no.
s1 (2022): 20–24. https://doi.org/10.1515/teme-2022-0065.'
ieee: 'F. Binder and T. Hausotte, “Über die Abgrenzung von Auflösungskonzepten in
der industriellen Computertomografie,” tm - Technisches Messen, vol. 89,
no. s1, pp. 20–24, 2022, doi: 10.1515/teme-2022-0065.'
mla: Binder, Felix, and Tino Hausotte. “Über Die Abgrenzung von Auflösungskonzepten
in Der Industriellen Computertomografie.” Tm - Technisches Messen, vol.
89, no. s1, Walter de Gruyter GmbH, 2022, pp. 20–24, doi:10.1515/teme-2022-0065.
short: F. Binder, T. Hausotte, Tm - Technisches Messen 89 (2022) 20–24.
date_created: 2022-12-05T21:43:51Z
date_updated: 2022-12-05T21:44:52Z
doi: 10.1515/teme-2022-0065
intvolume: ' 89'
issue: s1
keyword:
- Electrical and Electronic Engineering
- Instrumentation
language:
- iso: eng
page: 20-24
project:
- _id: '130'
grant_number: '418701707'
name: 'TRR 285: TRR 285'
- _id: '133'
name: 'TRR 285 - C: TRR 285 - Project Area C'
- _id: '149'
name: 'TRR 285 – C05: TRR 285 - Subproject C05'
publication: tm - Technisches Messen
publication_identifier:
issn:
- 2196-7113
- 0171-8096
publication_status: published
publisher: Walter de Gruyter GmbH
status: public
title: Über die Abgrenzung von Auflösungskonzepten in der industriellen Computertomografie
type: journal_article
user_id: '7850'
volume: 89
year: '2022'
...