---
_id: '19974'
abstract:
- lang: eng
text: Due to the trend towards lightweight design in car body development mechanical
joining technologies become increasingly important. These techniques allow for
the joining of dissimilar materials and thus enable multi-material design, while
thermic joining methods reach their limits. Semi-tubular self-piercing riveting
is an important mechanical joining technology. The rivet production, however,
is costly and time-consuming, as the process consists of several process steps
including the heat treatment and coating of the rivets in order to achieve an
adequate strength and corrosion resistance. The use of high nitrogen steel as
rivet material leads to the possibility of reducing process steps and hence increasing
the efficiency of the process. However, the high tool loads being expected due
to the high strain hardening of the material are a major challenge during the
rivet production. Thus, there is a need for appropriate forming strategies, such
as the manufacturing of the rivets at elevated temperatures. Prior investigations
led to the conclusion that forming already at 200 °C results in a distinct reduction
of the yield strength. To create a deeper understanding of the forming behaviour
of high nitrogen steel at elevated temperatures, compression tests were conducted
in a temperature range between room temperature and 200 °C. The determined true
stress – true strain curves are the basis for the further process and tool design
of the rivet production. Another key factor for the rivet manufacturing at elevated
temperatures is the influence of the process temperature on the tribological conditions.
For this reason, ring compression tests at room temperature and 200 °C are carried
out. The friction factors are determined on the basis of calibration curves resulting
from the numerical analysis of the ring compression process. The investigations
indicate that the friction factor at 200 °C is significantly higher compared to
room temperature. This essential fact has to be taken into account for the process
and tool design for the rivet production using high nitrogen steel.
article_number: '100023'
citation:
ama: Kuball C-M, Jung R, Uhe B, Meschut G, Merklein M, eds. Influence of the
Process Temperature on the Forming Behaviour and the Friction during Bulk Forming
of High Nitrogen Steel. Vol 1.; 2020. doi:10.1016/j.jajp.2020.100023
apa: Kuball, C.-M., Jung, R., Uhe, B., Meschut, G., & Merklein, M. (Eds.). (2020).
Influence of the process temperature on the forming behaviour and the friction
during bulk forming of high nitrogen steel (No. 100023; Vol. 1). https://doi.org/10.1016/j.jajp.2020.100023
bibtex: '@book{Kuball_Jung_Uhe_Meschut_Merklein_2020, series={Journal of Advanced
Joining Processes}, title={Influence of the process temperature on the forming
behaviour and the friction during bulk forming of high nitrogen steel}, volume={1},
DOI={10.1016/j.jajp.2020.100023},
number={100023}, year={2020}, collection={Journal of Advanced Joining Processes}
}'
chicago: Kuball, Clara-Maria, R Jung, Benedikt Uhe, Gerson Meschut, and Marion Merklein,
eds. Influence of the Process Temperature on the Forming Behaviour and the
Friction during Bulk Forming of High Nitrogen Steel. Vol. 1. Journal of Advanced
Joining Processes, 2020. https://doi.org/10.1016/j.jajp.2020.100023.
ieee: C.-M. Kuball, R. Jung, B. Uhe, G. Meschut, and M. Merklein, Eds., Influence
of the process temperature on the forming behaviour and the friction during bulk
forming of high nitrogen steel, vol. 1. 2020.
mla: Kuball, Clara-Maria, et al., editors. Influence of the Process Temperature
on the Forming Behaviour and the Friction during Bulk Forming of High Nitrogen
Steel. 100023, 2020, doi:10.1016/j.jajp.2020.100023.
short: C.-M. Kuball, R. Jung, B. Uhe, G. Meschut, M. Merklein, eds., Influence of
the Process Temperature on the Forming Behaviour and the Friction during Bulk
Forming of High Nitrogen Steel, 2020.
date_created: 2020-10-12T08:23:27Z
date_updated: 2026-02-27T10:45:08Z
department:
- _id: '157'
doi: 10.1016/j.jajp.2020.100023
editor:
- first_name: Clara-Maria
full_name: Kuball, Clara-Maria
last_name: Kuball
- first_name: R
full_name: Jung, R
last_name: Jung
- first_name: Benedikt
full_name: Uhe, Benedikt
id: '38131'
last_name: Uhe
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: Marion
full_name: Merklein, Marion
last_name: Merklein
intvolume: ' 1'
keyword:
- High nitrogen steel
- Self-piercing riveting
- Joining by forming
- Bulk forming
- Strain hardening
language:
- iso: eng
publication_status: published
quality_controlled: '1'
series_title: Journal of Advanced Joining Processes
status: public
title: Influence of the process temperature on the forming behaviour and the friction
during bulk forming of high nitrogen steel
type: conference_editor
user_id: '53912'
volume: 1
year: '2020'
...
---
_id: '15030'
abstract:
- lang: eng
text: Working-media-based forming processes (WMBF) represent a great potential regarding
the production of complex sheet-metal lightweight components with excellent surface
quality, shape accuracy and dimensional stability. The working-media-based forming
processes characterize the sheet-metal forming process, where the sheet metal
blank is formed during the forming process by means of a (quasi-)static or dynamic
working media pressure into a contouring forming tool. Although the WMBF offers
improved utilization of the formability of the used materials compared to conventional
sheet metal forming processes, there are limits in the production of complex deeper
or sharp edged components with (quasi-)static and dynamic WMBF processes, which
can not be overcome by using these methods alone. In order to overcome this, multi-level
WMBF process sequences for components with spherical and stepped geometries are
developed in this work. Here the developed strategies combine the advantages of
(quasi-)static and dynamic WMBF processes. Furthermore, based on analytical, experimental
and numerical investigations, innovative process management strategies were derived,
which completely compensate the local wall thickness changes, make better use
of existing material resources and thus enable the safe production of mentioned
geometries.
author:
- first_name: Eugen
full_name: Djakow, Eugen
id: '7904'
last_name: Djakow
citation:
ama: 'Djakow E. Ein Beitrag zur kombinierten (quasi-)statischen und dynamischen
Umformung von blechförmigen Halbzeugen. Düren: Shaker; 2019. doi:ISBN 978-3-8440-6723-1'
apa: 'Djakow, E. (2019). Ein Beitrag zur kombinierten (quasi-)statischen und
dynamischen Umformung von blechförmigen Halbzeugen. Düren: Shaker. https://doi.org/ISBN 978-3-8440-6723-1'
bibtex: '@book{Djakow_2019, place={Düren}, series={Paderborner Umformtechnik}, title={Ein
Beitrag zur kombinierten (quasi-)statischen und dynamischen Umformung von blechförmigen
Halbzeugen}, DOI={ISBN 978-3-8440-6723-1},
publisher={Shaker}, author={Djakow, Eugen}, year={2019}, collection={Paderborner
Umformtechnik} }'
chicago: 'Djakow, Eugen. Ein Beitrag zur kombinierten (quasi-)statischen und
dynamischen Umformung von blechförmigen Halbzeugen. Paderborner Umformtechnik.
Düren: Shaker, 2019. https://doi.org/ISBN
978-3-8440-6723-1.'
ieee: 'E. Djakow, Ein Beitrag zur kombinierten (quasi-)statischen und dynamischen
Umformung von blechförmigen Halbzeugen. Düren: Shaker, 2019.'
mla: Djakow, Eugen. Ein Beitrag zur kombinierten (quasi-)statischen und dynamischen
Umformung von blechförmigen Halbzeugen. Shaker, 2019, doi:ISBN 978-3-8440-6723-1.
short: E. Djakow, Ein Beitrag zur kombinierten (quasi-)statischen und dynamischen
Umformung von blechförmigen Halbzeugen, Shaker, Düren, 2019.
date_created: 2019-11-19T08:20:19Z
date_updated: 2022-01-06T06:52:15Z
doi: ISBN 978-3-8440-6723-1
keyword:
- High Speed Forming
language:
- iso: ger
page: '188'
place: Düren
publication_identifier:
unknown:
- ISBN 978-3-8440-6723-1
publication_status: published
publisher: Shaker
series_title: Paderborner Umformtechnik
status: public
title: Ein Beitrag zur kombinierten (quasi-)statischen und dynamischen Umformung von
blechförmigen Halbzeugen
type: dissertation
user_id: '7904'
year: '2019'
...
---
_id: '17651'
abstract:
- lang: eng
text: 'Consider mitigating the effects of denial of service or of malicious traffic
in networks by deleting edges. Edge deletion reduces the DoS or the number of
the malicious flows, but it also inadvertently removes some of the desired flows.
To model this important problem, we formulate two problems: (1) remove all the
undesirable flows while minimizing the damage to the desirable ones and (2) balance
removing the undesirable flows and not removing too many of the desirable flows.
We prove these problems are equivalent to important theoretical problems, thereby
being important not only practically but also theoretically, and very hard to
approximate in a general network. We employ reductions to nonetheless approximate
the problem and also provide a greedy approximation. When the network is a tree,
the problems are still MAX SNP-hard, but we provide a greedy-based 2l-approximation
algorithm, where l is the longest desirable flow. We also provide an algorithm,
approximating the first and the second problem within {\$}{\$}2 {\backslash}sqrt{\{}
2{\backslash}left| E {\backslash}right| {\}}{\$}{\$}and {\$}{\$}2 {\backslash}sqrt{\{}2
({\backslash}left| E {\backslash}right| + {\backslash}left| {\backslash}text {\{}undesirable
flows{\}} {\backslash}right| ){\}}{\$}{\$}, respectively, where E is the set of
the edges of the network. We also provide a fixed-parameter tractable (FPT) algorithm.
Finally, if the tree has a root such that every flow in the tree flows on the
path from the root to a leaf, we solve the problem exactly using dynamic programming.'
author:
- first_name: Gleb
full_name: Polevoy, Gleb
id: '83983'
last_name: Polevoy
- first_name: Stojan
full_name: Trajanovski, Stojan
last_name: Trajanovski
- first_name: Paola
full_name: Grosso, Paola
last_name: Grosso
- first_name: Cees
full_name: de Laat, Cees
last_name: de Laat
citation:
ama: 'Polevoy G, Trajanovski S, Grosso P, de Laat C. Removing Undesirable Flows
by Edge Deletion. In: Kim D, Uma RN, Zelikovsky A, eds. Combinatorial Optimization
and Applications. Cham: Springer International Publishing; 2018:217-232.'
apa: 'Polevoy, G., Trajanovski, S., Grosso, P., & de Laat, C. (2018). Removing
Undesirable Flows by Edge Deletion. In D. Kim, R. N. Uma, & A. Zelikovsky
(Eds.), Combinatorial Optimization and Applications (pp. 217–232). Cham:
Springer International Publishing.'
bibtex: '@inproceedings{Polevoy_Trajanovski_Grosso_de Laat_2018, place={Cham}, title={Removing
Undesirable Flows by Edge Deletion}, booktitle={Combinatorial Optimization and
Applications}, publisher={Springer International Publishing}, author={Polevoy,
Gleb and Trajanovski, Stojan and Grosso, Paola and de Laat, Cees}, editor={Kim,
Donghyun and Uma, R. N. and Zelikovsky, AlexanderEditors}, year={2018}, pages={217–232}
}'
chicago: 'Polevoy, Gleb, Stojan Trajanovski, Paola Grosso, and Cees de Laat. “Removing
Undesirable Flows by Edge Deletion.” In Combinatorial Optimization and Applications,
edited by Donghyun Kim, R. N. Uma, and Alexander Zelikovsky, 217–32. Cham: Springer
International Publishing, 2018.'
ieee: G. Polevoy, S. Trajanovski, P. Grosso, and C. de Laat, “Removing Undesirable
Flows by Edge Deletion,” in Combinatorial Optimization and Applications,
2018, pp. 217–232.
mla: Polevoy, Gleb, et al. “Removing Undesirable Flows by Edge Deletion.” Combinatorial
Optimization and Applications, edited by Donghyun Kim et al., Springer International
Publishing, 2018, pp. 217–32.
short: 'G. Polevoy, S. Trajanovski, P. Grosso, C. de Laat, in: D. Kim, R.N. Uma,
A. Zelikovsky (Eds.), Combinatorial Optimization and Applications, Springer International
Publishing, Cham, 2018, pp. 217–232.'
date_created: 2020-08-06T15:19:36Z
date_updated: 2022-01-06T06:53:16Z
department:
- _id: '63'
- _id: '541'
editor:
- first_name: Donghyun
full_name: Kim, Donghyun
last_name: Kim
- first_name: R. N.
full_name: Uma, R. N.
last_name: Uma
- first_name: Alexander
full_name: Zelikovsky, Alexander
last_name: Zelikovsky
extern: '1'
keyword:
- flow
- Red-Blue Set Cover
- Positive-Negative Partial Set Cover
- approximation
- tree
- MAX SNP-hard
- root
- leaf
- dynamic programming
- FPT
language:
- iso: eng
page: 217-232
place: Cham
publication: Combinatorial Optimization and Applications
publication_identifier:
isbn:
- 978-3-030-04651-4
publisher: Springer International Publishing
status: public
title: Removing Undesirable Flows by Edge Deletion
type: conference
user_id: '83983'
year: '2018'
...
---
_id: '2332'
abstract:
- lang: ger
text: "Ein wichtiges Element der Digitalen Transformation ist die Digitalisierung
der Prozesse in Unternehmen. Eine Herausforderung besteht hierbei in der systematischen
Erkennung von Digitalisierungspotenzialen in Prozessen. Bestehende Ansätze benötigen
Experten, welche Potenziale über ihre Erfahrung oder zeitaufwendig mithilfe von
Musterkatalogen identifizieren.\r\nIn diesem Artikel werden verschiedene Digitalisierungspotenziale
klassifiziert und Muster für ein zukünftiges musterbasiertes Analyseverfahren
zur automatisierten Identifikation von Digitalisierungspotenzialen in BPMN-Diagrammen
beschrieben. Im Vergleich zu bestehenden Ansätzen erlaubt es Experten die Identifizierung
von Digitalisierungspotenzialen effizienter und effektiver durchzuführen."
- lang: eng
text: "An important element of digital transformation is the digitalization of processes
within enterprises.\r\nA major challenge is the systematic identification of digitalization
potentials in business processes.\r\nExisting approaches require experts who identify
said potentials by using the time-consuming method of pattern catalogs or by relying
on their professional experiences. \r\nIn this paper we classify potentials of
digitalization and corresponding patterns for a future pattern-based analysis
procedure. This shall allow for the automated identification of digitalization
potentials in BPMN diagrams. In comparison to existing approaches, our proposed
method could support a more efficient and effective identification of digitalization
potentials by experts."
author:
- first_name: Florian
full_name: Rittmeier, Florian
id: '5281'
last_name: Rittmeier
- first_name: Gregor
full_name: Engels, Gregor
id: '107'
last_name: Engels
- first_name: Alexander
full_name: Teetz, Alexander
id: '5319'
last_name: Teetz
citation:
ama: 'Rittmeier F, Engels G, Teetz A. Digitalisierungspotenziale in Geschäftsprozessen
effizient und effektiv erkennen (Effective and Efficient Identification of Digitalization
Potentials in Business Processes). In: Joint Proceedings of the Workshops at
Modellierung 2018 co-located with Modellierung 2018, Braunschweig, Germany, February
21, 2018. Vol 2060. CEUR Workshop Proceedings. CEUR-WS.org; 2018:215--221.'
apa: Rittmeier, F., Engels, G., & Teetz, A. (2018). Digitalisierungspotenziale
in Geschäftsprozessen effizient und effektiv erkennen (Effective and Efficient
Identification of Digitalization Potentials in Business Processes). In Joint
Proceedings of the Workshops at Modellierung 2018 co-located with Modellierung
2018, Braunschweig, Germany, February 21, 2018. (Vol. 2060, pp. 215--221).
CEUR-WS.org.
bibtex: '@inproceedings{Rittmeier_Engels_Teetz_2018, series={CEUR Workshop Proceedings},
title={Digitalisierungspotenziale in Geschäftsprozessen effizient und effektiv
erkennen (Effective and Efficient Identification of Digitalization Potentials
in Business Processes)}, volume={2060}, booktitle={Joint Proceedings of the Workshops
at Modellierung 2018 co-located with Modellierung 2018, Braunschweig, Germany,
February 21, 2018.}, publisher={CEUR-WS.org}, author={Rittmeier, Florian and Engels,
Gregor and Teetz, Alexander}, year={2018}, pages={215--221}, collection={CEUR
Workshop Proceedings} }'
chicago: Rittmeier, Florian, Gregor Engels, and Alexander Teetz. “Digitalisierungspotenziale
in Geschäftsprozessen effizient und effektiv erkennen (Effective and Efficient
Identification of Digitalization Potentials in Business Processes).” In Joint
Proceedings of the Workshops at Modellierung 2018 co-located with Modellierung
2018, Braunschweig, Germany, February 21, 2018., 2060:215--221. CEUR Workshop
Proceedings. CEUR-WS.org, 2018.
ieee: F. Rittmeier, G. Engels, and A. Teetz, “Digitalisierungspotenziale in Geschäftsprozessen
effizient und effektiv erkennen (Effective and Efficient Identification of Digitalization
Potentials in Business Processes),” in Joint Proceedings of the Workshops at
Modellierung 2018 co-located with Modellierung 2018, Braunschweig, Germany, February
21, 2018., 2018, vol. 2060, pp. 215--221.
mla: Rittmeier, Florian, et al. “Digitalisierungspotenziale in Geschäftsprozessen
effizient und effektiv erkennen (Effective and Efficient Identification of Digitalization
Potentials in Business Processes).” Joint Proceedings of the Workshops at Modellierung
2018 co-located with Modellierung 2018, Braunschweig, Germany, February 21, 2018.,
vol. 2060, CEUR-WS.org, 2018, pp. 215--221.
short: 'F. Rittmeier, G. Engels, A. Teetz, in: Joint Proceedings of the Workshops
at Modellierung 2018 co-located with Modellierung 2018, Braunschweig, Germany,
February 21, 2018., CEUR-WS.org, 2018, pp. 215--221.'
date_created: 2018-04-13T09:44:09Z
date_updated: 2022-01-06T06:55:49Z
department:
- _id: '66'
intvolume: ' 2060'
keyword:
- Digitalisierungspotenziale
- BPI
- Digitale Transformation
- Information Flow-Modellierung
- Patterns
- Requirements Engineering
language:
- iso: ger
main_file_link:
- open_access: '1'
url: http://ceur-ws.org/Vol-2060/rebpm2.pdf
oa: '1'
page: 215--221
publication: Joint Proceedings of the Workshops at Modellierung 2018 co-located with
Modellierung 2018, Braunschweig, Germany, February 21, 2018.
publication_status: published
publisher: CEUR-WS.org
series_title: CEUR Workshop Proceedings
status: public
title: Digitalisierungspotenziale in Geschäftsprozessen effizient und effektiv erkennen
(Effective and Efficient Identification of Digitalization Potentials in Business
Processes)
type: conference
user_id: '5281'
volume: 2060
year: '2018'
...
---
_id: '10129'
abstract:
- lang: eng
text: There are many hard conjectures in graph theory, like Tutte's 5-flow conjecture,
and the 5-cycle double cover conjecture, which would be true in general if they
would be true for cubic graphs. Since most of them are trivially true for 3-edge-colorable
cubic graphs, cubic graphs which are not 3-edge-colorable, often called snarks,
play a key role in this context. Here, we survey parameters measuring how far
apart a non 3-edge-colorable graph is from being 3-edge-colorable. We study their
interrelation and prove some new results. Besides getting new insight into the
structure of snarks, we show that such measures give partial results with respect
to these important conjectures. The paper closes with a list of open problems
and conjectures.
article_number: P4.54
article_type: original
author:
- first_name: M. A.
full_name: Fiol, M. A.
last_name: Fiol
- first_name: Guiseppe
full_name: Mazzuoccolo, Guiseppe
last_name: Mazzuoccolo
- first_name: Eckhard
full_name: Steffen, Eckhard
id: '15548'
last_name: Steffen
citation:
ama: Fiol MA, Mazzuoccolo G, Steffen E. Measures of Edge-Uncolorability of Cubic
Graphs. The Electronic Journal of Combinatorics. 2018;25(4).
apa: Fiol, M. A., Mazzuoccolo, G., & Steffen, E. (2018). Measures of Edge-Uncolorability
of Cubic Graphs. The Electronic Journal of Combinatorics, 25(4).
bibtex: '@article{Fiol_Mazzuoccolo_Steffen_2018, title={Measures of Edge-Uncolorability
of Cubic Graphs}, volume={25}, number={4P4.54}, journal={The Electronic Journal
of Combinatorics}, author={Fiol, M. A. and Mazzuoccolo, Guiseppe and Steffen,
Eckhard}, year={2018} }'
chicago: Fiol, M. A., Guiseppe Mazzuoccolo, and Eckhard Steffen. “Measures of Edge-Uncolorability
of Cubic Graphs.” The Electronic Journal of Combinatorics 25, no. 4 (2018).
ieee: M. A. Fiol, G. Mazzuoccolo, and E. Steffen, “Measures of Edge-Uncolorability
of Cubic Graphs,” The Electronic Journal of Combinatorics, vol. 25, no.
4, 2018.
mla: Fiol, M. A., et al. “Measures of Edge-Uncolorability of Cubic Graphs.” The
Electronic Journal of Combinatorics, vol. 25, no. 4, P4.54, 2018.
short: M.A. Fiol, G. Mazzuoccolo, E. Steffen, The Electronic Journal of Combinatorics
25 (2018).
date_created: 2019-06-05T09:59:10Z
date_updated: 2022-01-06T06:50:30Z
department:
- _id: '542'
intvolume: ' 25'
issue: '4'
keyword:
- Cubic graph
- Tait coloring
- Snark
- Boole coloring
- Berge's conjecture
- Tutte's 5-flow conjecture
language:
- iso: eng
publication: The Electronic Journal of Combinatorics
status: public
title: Measures of Edge-Uncolorability of Cubic Graphs
type: journal_article
user_id: '15540'
volume: 25
year: '2018'
...
---
_id: '17652'
author:
- first_name: Gleb
full_name: Polevoy, Gleb
id: '83983'
last_name: Polevoy
- first_name: Stojan
full_name: Trajanovski, Stojan
last_name: Trajanovski
- first_name: Paola
full_name: Grosso, Paola
last_name: Grosso
- first_name: Cees
full_name: de Laat, Cees
last_name: de Laat
citation:
ama: 'Polevoy G, Trajanovski S, Grosso P, de Laat C. Filtering Undesirable Flows
in Networks. In: Combinatorial Optimization and Applications: 11th International
Conference, COCOA 2017, Shanghai, China, December 16-18, 2017, Proceedings, Part
I. Lecture Notes in Computer Science. Cham: Springer International Publishing;
2017:3-17. doi:10.1007/978-3-319-71150-8_1'
apa: 'Polevoy, G., Trajanovski, S., Grosso, P., & de Laat, C. (2017). Filtering
Undesirable Flows in Networks. In Combinatorial Optimization and Applications:
11th International Conference, COCOA 2017, Shanghai, China, December 16-18, 2017,
Proceedings, Part I (pp. 3–17). Cham: Springer International Publishing. https://doi.org/10.1007/978-3-319-71150-8_1'
bibtex: '@inproceedings{Polevoy_Trajanovski_Grosso_de Laat_2017, place={Cham}, series={Lecture
Notes in Computer Science}, title={Filtering Undesirable Flows in Networks}, DOI={10.1007/978-3-319-71150-8_1},
booktitle={Combinatorial Optimization and Applications: 11th International Conference,
COCOA 2017, Shanghai, China, December 16-18, 2017, Proceedings, Part I}, publisher={Springer
International Publishing}, author={Polevoy, Gleb and Trajanovski, Stojan and Grosso,
Paola and de Laat, Cees}, year={2017}, pages={3–17}, collection={Lecture Notes
in Computer Science} }'
chicago: 'Polevoy, Gleb, Stojan Trajanovski, Paola Grosso, and Cees de Laat. “Filtering
Undesirable Flows in Networks.” In Combinatorial Optimization and Applications:
11th International Conference, COCOA 2017, Shanghai, China, December 16-18, 2017,
Proceedings, Part I, 3–17. Lecture Notes in Computer Science. Cham: Springer
International Publishing, 2017. https://doi.org/10.1007/978-3-319-71150-8_1.'
ieee: 'G. Polevoy, S. Trajanovski, P. Grosso, and C. de Laat, “Filtering Undesirable
Flows in Networks,” in Combinatorial Optimization and Applications: 11th International
Conference, COCOA 2017, Shanghai, China, December 16-18, 2017, Proceedings, Part
I, 2017, pp. 3–17.'
mla: 'Polevoy, Gleb, et al. “Filtering Undesirable Flows in Networks.” Combinatorial
Optimization and Applications: 11th International Conference, COCOA 2017, Shanghai,
China, December 16-18, 2017, Proceedings, Part I, Springer International Publishing,
2017, pp. 3–17, doi:10.1007/978-3-319-71150-8_1.'
short: 'G. Polevoy, S. Trajanovski, P. Grosso, C. de Laat, in: Combinatorial Optimization
and Applications: 11th International Conference, COCOA 2017, Shanghai, China,
December 16-18, 2017, Proceedings, Part I, Springer International Publishing,
Cham, 2017, pp. 3–17.'
date_created: 2020-08-06T15:19:48Z
date_updated: 2022-01-06T06:53:16Z
department:
- _id: '63'
- _id: '541'
doi: 10.1007/978-3-319-71150-8_1
extern: '1'
keyword:
- flow
- filter
- MMSA
- set cover
- approximation
- local ratio algorithm
language:
- iso: eng
page: 3-17
place: Cham
publication: 'Combinatorial Optimization and Applications: 11th International Conference,
COCOA 2017, Shanghai, China, December 16-18, 2017, Proceedings, Part I'
publication_identifier:
isbn:
- 978-3-319-71150-8
publisher: Springer International Publishing
series_title: Lecture Notes in Computer Science
status: public
title: Filtering Undesirable Flows in Networks
type: conference
user_id: '83983'
year: '2017'
...
---
_id: '4873'
abstract:
- lang: eng
text: 'Banks face a ''behavioralization'' of their balance sheets since deposit
funding increasingly consists of non-maturing deposits with uncertain cash flows
exposing banks to asset liability (ALM) risk. Thus, this study examines the behavior
of banks’ retail customers regarding non-maturing deposits. Our unique sample
comprises the contract and cash flow data for 2.2 million individual contracts
from 1991 to 2010. We find that contractual rewards, i.e., qualified interest
payments, and government subsidies, effectively stabilize saving behavior and
thus bank funding. The probability of an early deposit withdrawal decreases by
approximately 40%, and cash flow volatility drops by about 25%. Our findings provide
important insights for banks using pricing incentives to steer desired saving
patterns for their non-maturing deposit portfolios. Finally, these results are
informative regarding the bank liquidity regulations (Basel III) concerning the
stability of deposits and the minimum requirements for risk management (European
Commission DIRECTIVE 2006/48/EC). '
article_type: original
author:
- first_name: Tobias
full_name: Schlueter, Tobias
last_name: Schlueter
- first_name: Sönke
full_name: Sievers, Sönke
id: '46447'
last_name: Sievers
- first_name: Thomas
full_name: Hartmann-Wendels, Thomas
last_name: Hartmann-Wendels
citation:
ama: Schlueter T, Sievers S, Hartmann-Wendels T. Bank funding stability, pricing
strategies and the guidance of depositors. Journal of Banking & Finance
(VHB-JOURQUAL 4 Ranking A). 2015;51:43-61. doi:10.2139/ssrn.2001449
apa: Schlueter, T., Sievers, S., & Hartmann-Wendels, T. (2015). Bank funding
stability, pricing strategies and the guidance of depositors. Journal of Banking
& Finance (VHB-JOURQUAL 4 Ranking A), 51, 43–61. https://doi.org/10.2139/ssrn.2001449
bibtex: '@article{Schlueter_Sievers_Hartmann-Wendels_2015, title={Bank funding stability,
pricing strategies and the guidance of depositors}, volume={51}, DOI={10.2139/ssrn.2001449},
journal={Journal of Banking & Finance (VHB-JOURQUAL 4 Ranking A)}, author={Schlueter,
Tobias and Sievers, Sönke and Hartmann-Wendels, Thomas}, year={2015}, pages={43–61}
}'
chicago: 'Schlueter, Tobias, Sönke Sievers, and Thomas Hartmann-Wendels. “Bank Funding
Stability, Pricing Strategies and the Guidance of Depositors.” Journal of Banking
& Finance (VHB-JOURQUAL 4 Ranking A) 51 (2015): 43–61. https://doi.org/10.2139/ssrn.2001449.'
ieee: 'T. Schlueter, S. Sievers, and T. Hartmann-Wendels, “Bank funding stability,
pricing strategies and the guidance of depositors,” Journal of Banking &
Finance (VHB-JOURQUAL 4 Ranking A), vol. 51, pp. 43–61, 2015, doi: 10.2139/ssrn.2001449.'
mla: Schlueter, Tobias, et al. “Bank Funding Stability, Pricing Strategies and the
Guidance of Depositors.” Journal of Banking & Finance (VHB-JOURQUAL 4 Ranking
A), vol. 51, 2015, pp. 43–61, doi:10.2139/ssrn.2001449.
short: T. Schlueter, S. Sievers, T. Hartmann-Wendels, Journal of Banking & Finance
(VHB-JOURQUAL 4 Ranking A) 51 (2015) 43–61.
date_created: 2018-10-26T07:08:32Z
date_updated: 2026-04-09T08:14:22Z
department:
- _id: '275'
doi: 10.2139/ssrn.2001449
intvolume: ' 51'
jel:
- G01
- G21
- G28
keyword:
- retail saving behavior
- non-maturing deposits
- deposit funding
- contractual rewards
- interest rate bonus
- saving persistence
- cash flow volatility
language:
- iso: eng
main_file_link:
- url: https://www.sciencedirect.com/science/article/pii/S0378426614003380
page: 43-61
publication: Journal of Banking & Finance (VHB-JOURQUAL 4 Ranking A)
publication_status: published
quality_controlled: '1'
status: public
title: Bank funding stability, pricing strategies and the guidance of depositors
type: journal_article
user_id: '115848'
volume: 51
year: '2015'
...
---
_id: '17663'
abstract:
- lang: eng
text: 'In this paper, we define and study a new problem, referred to as the Dependent
Unsplittable Flow Problem (D-UFP). We present and discuss this problem in the
context of large-scale powerful (radar/camera) sensor networks, but we believe
it has important applications on the admission of large flows in other networks
as well. In order to optimize the selection of flows transmitted to the gateway,
D-UFP takes into account possible dependencies between flows. We show that D-UFP
is more difficult than NP-hard problems for which no good approximation is known.
Then, we address two special cases of this problem: the case where all the sensors
have a shared channel and the case where the sensors form a mesh and route to
the gateway over a spanning tree.'
author:
- first_name: R.
full_name: Cohen, R.
last_name: Cohen
- first_name: I.
full_name: Nudelman, I.
last_name: Nudelman
- first_name: Gleb
full_name: Polevoy, Gleb
id: '83983'
last_name: Polevoy
citation:
ama: Cohen R, Nudelman I, Polevoy G. On the Admission of Dependent Flows in Powerful
Sensor Networks. Networking, IEEE/ACM Transactions on. 2013;21(5):1461-1471.
doi:10.1109/TNET.2012.2227792
apa: Cohen, R., Nudelman, I., & Polevoy, G. (2013). On the Admission of Dependent
Flows in Powerful Sensor Networks. Networking, IEEE/ACM Transactions On,
21(5), 1461–1471. https://doi.org/10.1109/TNET.2012.2227792
bibtex: '@article{Cohen_Nudelman_Polevoy_2013, title={On the Admission of Dependent
Flows in Powerful Sensor Networks}, volume={21}, DOI={10.1109/TNET.2012.2227792},
number={5}, journal={Networking, IEEE/ACM Transactions on}, author={Cohen, R.
and Nudelman, I. and Polevoy, Gleb}, year={2013}, pages={1461–1471} }'
chicago: 'Cohen, R., I. Nudelman, and Gleb Polevoy. “On the Admission of Dependent
Flows in Powerful Sensor Networks.” Networking, IEEE/ACM Transactions On
21, no. 5 (2013): 1461–71. https://doi.org/10.1109/TNET.2012.2227792.'
ieee: R. Cohen, I. Nudelman, and G. Polevoy, “On the Admission of Dependent Flows
in Powerful Sensor Networks,” Networking, IEEE/ACM Transactions on, vol.
21, no. 5, pp. 1461–1471, 2013.
mla: Cohen, R., et al. “On the Admission of Dependent Flows in Powerful Sensor Networks.”
Networking, IEEE/ACM Transactions On, vol. 21, no. 5, 2013, pp. 1461–71,
doi:10.1109/TNET.2012.2227792.
short: R. Cohen, I. Nudelman, G. Polevoy, Networking, IEEE/ACM Transactions On 21
(2013) 1461–1471.
date_created: 2020-08-06T15:22:05Z
date_updated: 2022-01-06T06:53:16Z
department:
- _id: '63'
- _id: '541'
doi: 10.1109/TNET.2012.2227792
extern: '1'
intvolume: ' 21'
issue: '5'
keyword:
- Approximation algorithms
- Approximation methods
- Bandwidth
- Logic gates
- Radar
- Vectors
- Wireless sensor networks
- Dependent flow scheduling
- sensor networks
language:
- iso: eng
page: 1461-1471
publication: Networking, IEEE/ACM Transactions on
publication_identifier:
issn:
- 1063-6692
status: public
title: On the Admission of Dependent Flows in Powerful Sensor Networks
type: journal_article
user_id: '83983'
volume: 21
year: '2013'
...
---
_id: '10620'
author:
- first_name: Jahanzeb
full_name: Anwer, Jahanzeb
last_name: Anwer
- first_name: Sebastian
full_name: Meisner, Sebastian
last_name: Meisner
- first_name: Marco
full_name: Platzner, Marco
id: '398'
last_name: Platzner
citation:
ama: 'Anwer J, Meisner S, Platzner M. Dynamic reliability management: Reconfiguring
reliability-levels of hardware designs at runtime. In: Reconfigurable Computing
and FPGAs (ReConFig), 2013 International Conference On. ; 2013:1-6. doi:10.1109/ReConFig.2013.6732280'
apa: 'Anwer, J., Meisner, S., & Platzner, M. (2013). Dynamic reliability management:
Reconfiguring reliability-levels of hardware designs at runtime. In Reconfigurable
Computing and FPGAs (ReConFig), 2013 International Conference on (pp. 1–6).
https://doi.org/10.1109/ReConFig.2013.6732280'
bibtex: '@inproceedings{Anwer_Meisner_Platzner_2013, title={Dynamic reliability
management: Reconfiguring reliability-levels of hardware designs at runtime},
DOI={10.1109/ReConFig.2013.6732280},
booktitle={Reconfigurable Computing and FPGAs (ReConFig), 2013 International Conference
on}, author={Anwer, Jahanzeb and Meisner, Sebastian and Platzner, Marco}, year={2013},
pages={1–6} }'
chicago: 'Anwer, Jahanzeb, Sebastian Meisner, and Marco Platzner. “Dynamic Reliability
Management: Reconfiguring Reliability-Levels of Hardware Designs at Runtime.”
In Reconfigurable Computing and FPGAs (ReConFig), 2013 International Conference
On, 1–6, 2013. https://doi.org/10.1109/ReConFig.2013.6732280.'
ieee: 'J. Anwer, S. Meisner, and M. Platzner, “Dynamic reliability management: Reconfiguring
reliability-levels of hardware designs at runtime,” in Reconfigurable Computing
and FPGAs (ReConFig), 2013 International Conference on, 2013, pp. 1–6.'
mla: 'Anwer, Jahanzeb, et al. “Dynamic Reliability Management: Reconfiguring Reliability-Levels
of Hardware Designs at Runtime.” Reconfigurable Computing and FPGAs (ReConFig),
2013 International Conference On, 2013, pp. 1–6, doi:10.1109/ReConFig.2013.6732280.'
short: 'J. Anwer, S. Meisner, M. Platzner, in: Reconfigurable Computing and FPGAs
(ReConFig), 2013 International Conference On, 2013, pp. 1–6.'
date_created: 2019-07-10T09:32:57Z
date_updated: 2022-01-06T06:50:48Z
department:
- _id: '78'
doi: 10.1109/ReConFig.2013.6732280
keyword:
- fault tolerant computing
- field programmable gate arrays
- logic design
- reliability
- BYU-LANL tool
- DRM tool flow
- FPGA based hardware designs
- avionic application
- device technologies
- dynamic reliability management
- fault-tolerant operation
- hardware designs
- reconfiguring reliability levels
- space applications
- Field programmable gate arrays
- Hardware
- Redundancy
- Reliability engineering
- Runtime
- Tunneling magnetoresistance
language:
- iso: eng
page: 1-6
publication: Reconfigurable Computing and FPGAs (ReConFig), 2013 International Conference
on
status: public
title: 'Dynamic reliability management: Reconfiguring reliability-levels of hardware
designs at runtime'
type: conference
user_id: '3118'
year: '2013'
...
---
_id: '5113'
abstract:
- lang: eng
text: 'Standard equity valuation approaches (i.e., DDM, RIM, and DCF model) are
derived under the assumption of ideal conditions, such as infinite payoffs and
clean surplus accounting. Because these conditions are hardly ever met, we extend
the standard approaches, based on the fundamental principle of financial statement
articulation. The extended models are then tested empirically by employing two
sets of forecasts: (1) analyst forecasts provided by Value Line and (2) forecasts
generated by cross-sectional regression models. The main result is that our extended
models yield considerably smaller valuation errors. Moreover, by construction,
identical value estimates are obtained across the extended models. By reestablishing
empirical equivalence under non-ideal conditions, our approach provides a benchmark
that enables us to quantify the errors resulting from individual deviations from
ideal conditions, and thus, to analyze the robustness of the standard approaches.
Finally, by providing a level playing field for the different valuation approaches,
our findings have implications for other empirical settings, for example, estimating
the implied cost of capital. '
article_type: original
author:
- first_name: Nicolas
full_name: Heinrichs, Nicolas
last_name: Heinrichs
- first_name: Dieter
full_name: Hess, Dieter
last_name: Hess
- first_name: Carsten
full_name: Homburg, Carsten
last_name: Homburg
- first_name: Michael
full_name: Lorenz, Michael
last_name: Lorenz
- first_name: Sönke
full_name: Sievers, Sönke
id: '46447'
last_name: Sievers
citation:
ama: 'Heinrichs N, Hess D, Homburg C, Lorenz M, Sievers S. Extended dividend, cash
flow, and residual income valuation models: Accounting for deviations from ideal
conditions. Contemporary Accounting Research (VHB-JOURQUAL 4 Ranking A+).
2013;30(1):42-79. doi:10.2139/ssrn.1145201'
apa: 'Heinrichs, N., Hess, D., Homburg, C., Lorenz, M., & Sievers, S. (2013).
Extended dividend, cash flow, and residual income valuation models: Accounting
for deviations from ideal conditions. Contemporary Accounting Research (VHB-JOURQUAL
4 Ranking A+), 30(1), 42–79. https://doi.org/10.2139/ssrn.1145201'
bibtex: '@article{Heinrichs_Hess_Homburg_Lorenz_Sievers_2013, title={Extended dividend,
cash flow, and residual income valuation models: Accounting for deviations from
ideal conditions}, volume={30}, DOI={10.2139/ssrn.1145201},
number={1}, journal={Contemporary Accounting Research (VHB-JOURQUAL 4 Ranking
A+)}, publisher={Wiley Online Library}, author={Heinrichs, Nicolas and Hess, Dieter
and Homburg, Carsten and Lorenz, Michael and Sievers, Sönke}, year={2013}, pages={42–79}
}'
chicago: 'Heinrichs, Nicolas, Dieter Hess, Carsten Homburg, Michael Lorenz, and
Sönke Sievers. “Extended Dividend, Cash Flow, and Residual Income Valuation Models:
Accounting for Deviations from Ideal Conditions.” Contemporary Accounting Research
(VHB-JOURQUAL 4 Ranking A+) 30, no. 1 (2013): 42–79. https://doi.org/10.2139/ssrn.1145201.'
ieee: 'N. Heinrichs, D. Hess, C. Homburg, M. Lorenz, and S. Sievers, “Extended dividend,
cash flow, and residual income valuation models: Accounting for deviations from
ideal conditions,” Contemporary Accounting Research (VHB-JOURQUAL 4 Ranking
A+), vol. 30, no. 1, pp. 42–79, 2013, doi: 10.2139/ssrn.1145201.'
mla: 'Heinrichs, Nicolas, et al. “Extended Dividend, Cash Flow, and Residual Income
Valuation Models: Accounting for Deviations from Ideal Conditions.” Contemporary
Accounting Research (VHB-JOURQUAL 4 Ranking A+), vol. 30, no. 1, Wiley Online
Library, 2013, pp. 42–79, doi:10.2139/ssrn.1145201.'
short: N. Heinrichs, D. Hess, C. Homburg, M. Lorenz, S. Sievers, Contemporary Accounting
Research (VHB-JOURQUAL 4 Ranking A+) 30 (2013) 42–79.
date_created: 2018-10-31T07:58:17Z
date_updated: 2026-04-09T08:22:32Z
department:
- _id: '275'
doi: 10.2139/ssrn.1145201
extern: '1'
intvolume: ' 30'
issue: '1'
jel:
- G12
- G14
- M41
keyword:
- Dividend Discount Model
- Residual Income
- Discounted Cash Flow
- Dirty Surplus
- Terminal Value
- Valuation Error
language:
- iso: eng
main_file_link:
- url: http://onlinelibrary.wiley.com/doi/10.1111/j.1911-3846.2011.01148.x/abstract
page: 42-79
publication: Contemporary Accounting Research (VHB-JOURQUAL 4 Ranking A+)
publication_status: published
publisher: Wiley Online Library
quality_controlled: '1'
related_material:
link:
- relation: earlier_version
url: http://papers.ssrn.com/sol3/papers.cfm?abstract_id=1145201
status: public
title: 'Extended dividend, cash flow, and residual income valuation models: Accounting
for deviations from ideal conditions'
type: journal_article
user_id: '115848'
volume: 30
year: '2013'
...
---
_id: '37050'
abstract:
- lang: eng
text: The main obstacle for the wide acceptance of UML and SysML in the design of
electronic systems is due to a major gap in the design flow between UML-based
modeling and SystemC-based verification. To overcome this gap, we present an approach
developed in the SATURN project which introduces UML profiles for the co-modeling
of SystemC and C with code generation support in the context of the SysML tool
suite ARTiSAN Studio®. We finally discuss the evaluation of the approach by two
case studies.
author:
- first_name: Wolfgang
full_name: Müller, Wolfgang
id: '16243'
last_name: Müller
- first_name: Da
full_name: He, Da
last_name: He
- first_name: Fabian
full_name: Mischkalla, Fabian
last_name: Mischkalla
- first_name: Arthur
full_name: Wegele, Arthur
last_name: Wegele
- first_name: Adrian
full_name: Larkham, Adrian
last_name: Larkham
- first_name: Paul
full_name: Whiston, Paul
last_name: Whiston
- first_name: Pablo
full_name: Penil, Pablo
last_name: Penil
- first_name: Eugenio
full_name: Villar, Eugenio
last_name: Villar
- first_name: Nikolaos
full_name: Mitas, Nikolaos
last_name: Mitas
- first_name: Dimitros
full_name: Kritharidis, Dimitros
last_name: Kritharidis
- first_name: Florent
full_name: Azcarate, Florent
last_name: Azcarate
- first_name: Manuel
full_name: Carballeda, Manuel
last_name: Carballeda
citation:
ama: 'Müller W, He D, Mischkalla F, et al. The SATURN Approach to SysML-based HW/SW
Codesign. In: Proceedings of the IEEE Computer Society Annual Symposium on
VLSI. Lecture Notes in Electrical Engineering. ; 2010. doi:10.1007/978-94-007-1488-5_9'
apa: Müller, W., He, D., Mischkalla, F., Wegele, A., Larkham, A., Whiston, P., Penil,
P., Villar, E., Mitas, N., Kritharidis, D., Azcarate, F., & Carballeda, M.
(2010). The SATURN Approach to SysML-based HW/SW Codesign. Proceedings of the
IEEE Computer Society Annual Symposium on VLSI. https://doi.org/10.1007/978-94-007-1488-5_9
bibtex: '@inproceedings{Müller_He_Mischkalla_Wegele_Larkham_Whiston_Penil_Villar_Mitas_Kritharidis_et
al._2010, series={Lecture Notes in Electrical Engineering}, title={The SATURN
Approach to SysML-based HW/SW Codesign}, DOI={10.1007/978-94-007-1488-5_9},
booktitle={Proceedings of the IEEE Computer Society Annual Symposium on VLSI},
author={Müller, Wolfgang and He, Da and Mischkalla, Fabian and Wegele, Arthur
and Larkham, Adrian and Whiston, Paul and Penil, Pablo and Villar, Eugenio and
Mitas, Nikolaos and Kritharidis, Dimitros and et al.}, year={2010}, collection={Lecture
Notes in Electrical Engineering} }'
chicago: Müller, Wolfgang, Da He, Fabian Mischkalla, Arthur Wegele, Adrian Larkham,
Paul Whiston, Pablo Penil, et al. “The SATURN Approach to SysML-Based HW/SW Codesign.”
In Proceedings of the IEEE Computer Society Annual Symposium on VLSI. Lecture
Notes in Electrical Engineering, 2010. https://doi.org/10.1007/978-94-007-1488-5_9.
ieee: 'W. Müller et al., “The SATURN Approach to SysML-based HW/SW Codesign,”
2010, doi: 10.1007/978-94-007-1488-5_9.'
mla: Müller, Wolfgang, et al. “The SATURN Approach to SysML-Based HW/SW Codesign.”
Proceedings of the IEEE Computer Society Annual Symposium on VLSI, 2010,
doi:10.1007/978-94-007-1488-5_9.
short: 'W. Müller, D. He, F. Mischkalla, A. Wegele, A. Larkham, P. Whiston, P. Penil,
E. Villar, N. Mitas, D. Kritharidis, F. Azcarate, M. Carballeda, in: Proceedings
of the IEEE Computer Society Annual Symposium on VLSI, 2010.'
date_created: 2023-01-17T11:19:45Z
date_updated: 2023-01-17T11:19:53Z
department:
- _id: '672'
doi: 10.1007/978-94-007-1488-5_9
keyword:
- Communicate Sequential Process Virtual Platform Smart Camera Synchronous
Data Flow Artisan Studio
language:
- iso: eng
publication: Proceedings of the IEEE Computer Society Annual Symposium on VLSI
publication_identifier:
eisbn:
- 978-94-007-1488-5
series_title: Lecture Notes in Electrical Engineering
status: public
title: The SATURN Approach to SysML-based HW/SW Codesign
type: conference
user_id: '5786'
year: '2010'
...
---
_id: '10646'
author:
- first_name: Klaus
full_name: Danne, Klaus
last_name: Danne
- first_name: Roland
full_name: Mühlenbernd, Roland
last_name: Mühlenbernd
- first_name: Marco
full_name: Platzner, Marco
id: '398'
last_name: Platzner
citation:
ama: Danne K, Mühlenbernd R, Platzner M. Server-based execution of periodic tasks
on dynamically reconfigurable hardware. IET Computers Digital Techniques.
2007;1(4):295-302. doi:10.1049/iet-cdt:20060186
apa: Danne, K., Mühlenbernd, R., & Platzner, M. (2007). Server-based execution
of periodic tasks on dynamically reconfigurable hardware. IET Computers Digital
Techniques, 1(4), 295–302. https://doi.org/10.1049/iet-cdt:20060186
bibtex: '@article{Danne_Mühlenbernd_Platzner_2007, title={Server-based execution
of periodic tasks on dynamically reconfigurable hardware}, volume={1}, DOI={10.1049/iet-cdt:20060186},
number={4}, journal={IET Computers Digital Techniques}, author={Danne, Klaus and
Mühlenbernd, Roland and Platzner, Marco}, year={2007}, pages={295–302} }'
chicago: 'Danne, Klaus, Roland Mühlenbernd, and Marco Platzner. “Server-Based Execution
of Periodic Tasks on Dynamically Reconfigurable Hardware.” IET Computers Digital
Techniques 1, no. 4 (2007): 295–302. https://doi.org/10.1049/iet-cdt:20060186.'
ieee: K. Danne, R. Mühlenbernd, and M. Platzner, “Server-based execution of periodic
tasks on dynamically reconfigurable hardware,” IET Computers Digital Techniques,
vol. 1, no. 4, pp. 295–302, 2007.
mla: Danne, Klaus, et al. “Server-Based Execution of Periodic Tasks on Dynamically
Reconfigurable Hardware.” IET Computers Digital Techniques, vol. 1, no.
4, 2007, pp. 295–302, doi:10.1049/iet-cdt:20060186.
short: K. Danne, R. Mühlenbernd, M. Platzner, IET Computers Digital Techniques 1
(2007) 295–302.
date_created: 2019-07-10T11:10:54Z
date_updated: 2022-01-06T06:50:49Z
department:
- _id: '78'
doi: 10.1049/iet-cdt:20060186
intvolume: ' 1'
issue: '4'
keyword:
- reconfigurable architectures
- resource allocation
- device reconfiguration time
- dynamic hardware reconfiguration
- dynamically reconfigurable hardware
- light-weight runtime system
- merge server distribute load
- periodic real-time tasks
- runtime system overheads
- schedulability analysis
- scheduling technique
- server-based execution
- synthesis tool flow
language:
- iso: eng
page: 295-302
publication: IET Computers Digital Techniques
publication_identifier:
issn:
- 1751-8601
status: public
title: Server-based execution of periodic tasks on dynamically reconfigurable hardware
type: journal_article
user_id: '3118'
volume: 1
year: '2007'
...
---
_id: '39538'
abstract:
- lang: eng
text: This article discusses the application of Pictorial Janus (PJ) for the rapid
development and analysis of protocols by animation and complete visualization.
In order to make PJ applicable in the context of hardware description we first
extend PJ by timing facilities (Timed PJ) and introduce an approach for integrating
VHDL models into this visual framework preserving the simulation semantics of
VHDL. We finally give the example of the specification and animation of a non
interlocked protocol.
author:
- first_name: Wolfgang
full_name: Müller, Wolfgang
id: '16243'
last_name: Müller
- first_name: Georg
full_name: Lehrenfeld, Georg
last_name: Lehrenfeld
- first_name: C.
full_name: Tahedl, C.
last_name: Tahedl
citation:
ama: 'Müller W, Lehrenfeld G, Tahedl C. Complete Visual Specification and Animations
of Protocols. In: Proceedings of ASP-DAC’95/CHDL’95/VLSI’95 with EDA Technofair.
; 1995. doi:10.1109/ASPDAC.1995.486383'
apa: Müller, W., Lehrenfeld, G., & Tahedl, C. (1995). Complete Visual Specification
and Animations of Protocols. Proceedings of ASP-DAC’95/CHDL’95/VLSI’95 with
EDA Technofair. https://doi.org/10.1109/ASPDAC.1995.486383
bibtex: '@inproceedings{Müller_Lehrenfeld_Tahedl_1995, place={Chiba, Japan }, title={Complete
Visual Specification and Animations of Protocols}, DOI={10.1109/ASPDAC.1995.486383},
booktitle={Proceedings of ASP-DAC’95/CHDL’95/VLSI’95 with EDA Technofair}, author={Müller,
Wolfgang and Lehrenfeld, Georg and Tahedl, C.}, year={1995} }'
chicago: Müller, Wolfgang, Georg Lehrenfeld, and C. Tahedl. “Complete Visual Specification
and Animations of Protocols.” In Proceedings of ASP-DAC’95/CHDL’95/VLSI’95
with EDA Technofair. Chiba, Japan , 1995. https://doi.org/10.1109/ASPDAC.1995.486383.
ieee: 'W. Müller, G. Lehrenfeld, and C. Tahedl, “Complete Visual Specification and
Animations of Protocols,” 1995, doi: 10.1109/ASPDAC.1995.486383.'
mla: Müller, Wolfgang, et al. “Complete Visual Specification and Animations of Protocols.”
Proceedings of ASP-DAC’95/CHDL’95/VLSI’95 with EDA Technofair, 1995, doi:10.1109/ASPDAC.1995.486383.
short: 'W. Müller, G. Lehrenfeld, C. Tahedl, in: Proceedings of ASP-DAC’95/CHDL’95/VLSI’95
with EDA Technofair, Chiba, Japan , 1995.'
date_created: 2023-01-24T12:05:55Z
date_updated: 2023-01-24T12:05:59Z
department:
- _id: '672'
doi: 10.1109/ASPDAC.1995.486383
keyword:
- Animation
- Protocols
- Timing
- Computer languages
- Electronic mail
- Context modeling
- Visualization
- Control systems
- Flow graphs
- Trademarks
language:
- iso: eng
place: 'Chiba, Japan '
publication: Proceedings of ASP-DAC'95/CHDL'95/VLSI'95 with EDA Technofair
publication_identifier:
isbn:
- 4-930813-67-0
status: public
title: Complete Visual Specification and Animations of Protocols
type: conference
user_id: '5786'
year: '1995'
...