[{"quality_controlled":"1","publication_identifier":{"issn":["0142-1123"]},"publication_status":"published","year":"2021","intvolume":"       153","citation":{"ieee":"S. Pramanik, A. Andreiev, K.-P. Hoyer, and M. Schaper, “Quasi in-situ analysis of fracture path during cyclic loading of double-edged U notched additively manufactured FeCo alloy,” <i>International Journal of Fatigue</i>, vol. 153, Art. no. 106498, 2021, doi: <a href=\"https://doi.org/10.1016/j.ijfatigue.2021.106498\">10.1016/j.ijfatigue.2021.106498</a>.","chicago":"Pramanik, Sudipta, Anatolii Andreiev, Kay-Peter Hoyer, and Mirko Schaper. “Quasi In-Situ Analysis of Fracture Path during Cyclic Loading of Double-Edged U Notched Additively Manufactured FeCo Alloy.” <i>International Journal of Fatigue</i> 153 (2021). <a href=\"https://doi.org/10.1016/j.ijfatigue.2021.106498\">https://doi.org/10.1016/j.ijfatigue.2021.106498</a>.","ama":"Pramanik S, Andreiev A, Hoyer K-P, Schaper M. Quasi in-situ analysis of fracture path during cyclic loading of double-edged U notched additively manufactured FeCo alloy. <i>International Journal of Fatigue</i>. 2021;153. doi:<a href=\"https://doi.org/10.1016/j.ijfatigue.2021.106498\">10.1016/j.ijfatigue.2021.106498</a>","mla":"Pramanik, Sudipta, et al. “Quasi In-Situ Analysis of Fracture Path during Cyclic Loading of Double-Edged U Notched Additively Manufactured FeCo Alloy.” <i>International Journal of Fatigue</i>, vol. 153, 106498, Elsevier BV, 2021, doi:<a href=\"https://doi.org/10.1016/j.ijfatigue.2021.106498\">10.1016/j.ijfatigue.2021.106498</a>.","short":"S. Pramanik, A. Andreiev, K.-P. Hoyer, M. Schaper, International Journal of Fatigue 153 (2021).","bibtex":"@article{Pramanik_Andreiev_Hoyer_Schaper_2021, title={Quasi in-situ analysis of fracture path during cyclic loading of double-edged U notched additively manufactured FeCo alloy}, volume={153}, DOI={<a href=\"https://doi.org/10.1016/j.ijfatigue.2021.106498\">10.1016/j.ijfatigue.2021.106498</a>}, number={106498}, journal={International Journal of Fatigue}, publisher={Elsevier BV}, author={Pramanik, Sudipta and Andreiev, Anatolii and Hoyer, Kay-Peter and Schaper, Mirko}, year={2021} }","apa":"Pramanik, S., Andreiev, A., Hoyer, K.-P., &#38; Schaper, M. (2021). Quasi in-situ analysis of fracture path during cyclic loading of double-edged U notched additively manufactured FeCo alloy. <i>International Journal of Fatigue</i>, <i>153</i>, Article 106498. <a href=\"https://doi.org/10.1016/j.ijfatigue.2021.106498\">https://doi.org/10.1016/j.ijfatigue.2021.106498</a>"},"publisher":"Elsevier BV","date_updated":"2023-06-01T14:35:13Z","volume":153,"date_created":"2023-02-02T14:33:05Z","author":[{"first_name":"Sudipta","full_name":"Pramanik, Sudipta","last_name":"Pramanik"},{"last_name":"Andreiev","full_name":"Andreiev, Anatolii","id":"50215","first_name":"Anatolii"},{"first_name":"Kay-Peter","full_name":"Hoyer, Kay-Peter","id":"48411","last_name":"Hoyer"},{"last_name":"Schaper","full_name":"Schaper, Mirko","id":"43720","first_name":"Mirko"}],"title":"Quasi in-situ analysis of fracture path during cyclic loading of double-edged U notched additively manufactured FeCo alloy","doi":"10.1016/j.ijfatigue.2021.106498","publication":"International Journal of Fatigue","type":"journal_article","status":"public","_id":"41510","department":[{"_id":"9"},{"_id":"158"}],"user_id":"43720","keyword":["Industrial and Manufacturing Engineering","Mechanical Engineering","Mechanics of Materials","General Materials Science","Modeling and Simulation"],"article_number":"106498","language":[{"iso":"eng"}]},{"title":"Investigating the microstructure of an additively manufactured FeCo alloy: an electron microscopy study","doi":"10.1016/j.addma.2021.102087","publisher":"Elsevier BV","date_updated":"2023-06-01T14:35:58Z","volume":46,"author":[{"full_name":"Pramanik, Sudipta","last_name":"Pramanik","first_name":"Sudipta"},{"last_name":"Tasche","full_name":"Tasche, Lennart","id":"71508","first_name":"Lennart"},{"id":"48411","full_name":"Hoyer, Kay-Peter","last_name":"Hoyer","first_name":"Kay-Peter"},{"last_name":"Schaper","full_name":"Schaper, Mirko","id":"43720","first_name":"Mirko"}],"date_created":"2023-02-02T14:35:02Z","year":"2021","intvolume":"        46","citation":{"ieee":"S. Pramanik, L. Tasche, K.-P. Hoyer, and M. Schaper, “Investigating the microstructure of an additively manufactured FeCo alloy: an electron microscopy study,” <i>Additive Manufacturing</i>, vol. 46, Art. no. 102087, 2021, doi: <a href=\"https://doi.org/10.1016/j.addma.2021.102087\">10.1016/j.addma.2021.102087</a>.","chicago":"Pramanik, Sudipta, Lennart Tasche, Kay-Peter Hoyer, and Mirko Schaper. “Investigating the Microstructure of an Additively Manufactured FeCo Alloy: An Electron Microscopy Study.” <i>Additive Manufacturing</i> 46 (2021). <a href=\"https://doi.org/10.1016/j.addma.2021.102087\">https://doi.org/10.1016/j.addma.2021.102087</a>.","ama":"Pramanik S, Tasche L, Hoyer K-P, Schaper M. Investigating the microstructure of an additively manufactured FeCo alloy: an electron microscopy study. <i>Additive Manufacturing</i>. 2021;46. doi:<a href=\"https://doi.org/10.1016/j.addma.2021.102087\">10.1016/j.addma.2021.102087</a>","apa":"Pramanik, S., Tasche, L., Hoyer, K.-P., &#38; Schaper, M. (2021). Investigating the microstructure of an additively manufactured FeCo alloy: an electron microscopy study. <i>Additive Manufacturing</i>, <i>46</i>, Article 102087. <a href=\"https://doi.org/10.1016/j.addma.2021.102087\">https://doi.org/10.1016/j.addma.2021.102087</a>","short":"S. Pramanik, L. Tasche, K.-P. Hoyer, M. Schaper, Additive Manufacturing 46 (2021).","bibtex":"@article{Pramanik_Tasche_Hoyer_Schaper_2021, title={Investigating the microstructure of an additively manufactured FeCo alloy: an electron microscopy study}, volume={46}, DOI={<a href=\"https://doi.org/10.1016/j.addma.2021.102087\">10.1016/j.addma.2021.102087</a>}, number={102087}, journal={Additive Manufacturing}, publisher={Elsevier BV}, author={Pramanik, Sudipta and Tasche, Lennart and Hoyer, Kay-Peter and Schaper, Mirko}, year={2021} }","mla":"Pramanik, Sudipta, et al. “Investigating the Microstructure of an Additively Manufactured FeCo Alloy: An Electron Microscopy Study.” <i>Additive Manufacturing</i>, vol. 46, 102087, Elsevier BV, 2021, doi:<a href=\"https://doi.org/10.1016/j.addma.2021.102087\">10.1016/j.addma.2021.102087</a>."},"publication_identifier":{"issn":["2214-8604"]},"quality_controlled":"1","publication_status":"published","keyword":["Industrial and Manufacturing Engineering","Engineering (miscellaneous)","General Materials Science","Biomedical Engineering"],"article_number":"102087","language":[{"iso":"eng"}],"_id":"41515","department":[{"_id":"9"},{"_id":"158"}],"user_id":"43720","status":"public","publication":"Additive Manufacturing","type":"journal_article"},{"type":"journal_article","publication":"Chemical Engineering Journal","status":"public","_id":"46009","user_id":"100383","article_number":"132736","keyword":["Industrial and Manufacturing Engineering","General Chemical Engineering","Environmental Chemistry","General Chemistry"],"language":[{"iso":"eng"}],"extern":"1","publication_status":"published","publication_identifier":{"issn":["1385-8947"]},"year":"2021","citation":{"chicago":"Hu, Jie, Daochuan Jiang, Zhaoyue Weng, Ying Pan, Zhongjun Li, Haiwei Du, and Yupeng Yuan. “A Universal Electrochemical Activation Enabling Lattice Oxygen Activation in Nickel-Based Catalyst for Efficient Water Oxidation.” <i>Chemical Engineering Journal</i> 430 (2021). <a href=\"https://doi.org/10.1016/j.cej.2021.132736\">https://doi.org/10.1016/j.cej.2021.132736</a>.","ieee":"J. Hu <i>et al.</i>, “A universal electrochemical activation enabling lattice oxygen activation in nickel-based catalyst for efficient water oxidation,” <i>Chemical Engineering Journal</i>, vol. 430, Art. no. 132736, 2021, doi: <a href=\"https://doi.org/10.1016/j.cej.2021.132736\">10.1016/j.cej.2021.132736</a>.","ama":"Hu J, Jiang D, Weng Z, et al. A universal electrochemical activation enabling lattice oxygen activation in nickel-based catalyst for efficient water oxidation. <i>Chemical Engineering Journal</i>. 2021;430. doi:<a href=\"https://doi.org/10.1016/j.cej.2021.132736\">10.1016/j.cej.2021.132736</a>","apa":"Hu, J., Jiang, D., Weng, Z., Pan, Y., Li, Z., Du, H., &#38; Yuan, Y. (2021). A universal electrochemical activation enabling lattice oxygen activation in nickel-based catalyst for efficient water oxidation. <i>Chemical Engineering Journal</i>, <i>430</i>, Article 132736. <a href=\"https://doi.org/10.1016/j.cej.2021.132736\">https://doi.org/10.1016/j.cej.2021.132736</a>","mla":"Hu, Jie, et al. “A Universal Electrochemical Activation Enabling Lattice Oxygen Activation in Nickel-Based Catalyst for Efficient Water Oxidation.” <i>Chemical Engineering Journal</i>, vol. 430, 132736, Elsevier BV, 2021, doi:<a href=\"https://doi.org/10.1016/j.cej.2021.132736\">10.1016/j.cej.2021.132736</a>.","short":"J. Hu, D. Jiang, Z. Weng, Y. Pan, Z. Li, H. Du, Y. Yuan, Chemical Engineering Journal 430 (2021).","bibtex":"@article{Hu_Jiang_Weng_Pan_Li_Du_Yuan_2021, title={A universal electrochemical activation enabling lattice oxygen activation in nickel-based catalyst for efficient water oxidation}, volume={430}, DOI={<a href=\"https://doi.org/10.1016/j.cej.2021.132736\">10.1016/j.cej.2021.132736</a>}, number={132736}, journal={Chemical Engineering Journal}, publisher={Elsevier BV}, author={Hu, Jie and Jiang, Daochuan and Weng, Zhaoyue and Pan, Ying and Li, Zhongjun and Du, Haiwei and Yuan, Yupeng}, year={2021} }"},"intvolume":"       430","publisher":"Elsevier BV","date_updated":"2023-07-11T16:40:18Z","author":[{"last_name":"Hu","full_name":"Hu, Jie","first_name":"Jie"},{"first_name":"Daochuan","full_name":"Jiang, Daochuan","last_name":"Jiang"},{"first_name":"Zhaoyue","full_name":"Weng, Zhaoyue","last_name":"Weng"},{"last_name":"Pan","id":"100383","full_name":"Pan, Ying","first_name":"Ying"},{"first_name":"Zhongjun","last_name":"Li","full_name":"Li, Zhongjun"},{"full_name":"Du, Haiwei","last_name":"Du","first_name":"Haiwei"},{"first_name":"Yupeng","last_name":"Yuan","full_name":"Yuan, Yupeng"}],"date_created":"2023-07-11T14:49:50Z","volume":430,"title":"A universal electrochemical activation enabling lattice oxygen activation in nickel-based catalyst for efficient water oxidation","doi":"10.1016/j.cej.2021.132736"},{"department":[{"_id":"157"},{"_id":"43"}],"user_id":"83408","_id":"51199","project":[{"grant_number":"418701707","name":"TRR 285: TRR 285","_id":"130"},{"_id":"133","name":"TRR 285 - C: TRR 285 - Project Area C"},{"_id":"148","name":"TRR 285 – C04: TRR 285 - Subproject C04"},{"_id":"131","name":"TRR 285 - A: TRR 285 - Project Area A"},{"name":"TRR 285 – A03: TRR 285 - Subproject A03","_id":"137"}],"type":"journal_article","status":"public","volume":16,"author":[{"full_name":"Gröger, Benjamin","last_name":"Gröger","first_name":"Benjamin"},{"first_name":"Daniel","full_name":"Köhler, Daniel","last_name":"Köhler"},{"first_name":"Julian","last_name":"Vorderbrüggen","full_name":"Vorderbrüggen, Julian"},{"full_name":"Troschitz, Juliane","last_name":"Troschitz","first_name":"Juliane"},{"first_name":"Robert","full_name":"Kupfer, Robert","last_name":"Kupfer"},{"last_name":"Meschut","full_name":"Meschut, Gerson","first_name":"Gerson"},{"full_name":"Gude, Maik","last_name":"Gude","first_name":"Maik"}],"date_updated":"2025-06-02T20:20:49Z","doi":"10.1007/s11740-021-01091-x","publication_identifier":{"issn":["0944-6524","1863-7353"]},"publication_status":"published","page":"203-212","intvolume":"        16","citation":{"ama":"Gröger B, Köhler D, Vorderbrüggen J, et al. Computed tomography investigation of the material structure in clinch joints in aluminium fibre-reinforced thermoplastic sheets. <i>Production Engineering</i>. 2021;16(2-3):203-212. doi:<a href=\"https://doi.org/10.1007/s11740-021-01091-x\">10.1007/s11740-021-01091-x</a>","chicago":"Gröger, Benjamin, Daniel Köhler, Julian Vorderbrüggen, Juliane Troschitz, Robert Kupfer, Gerson Meschut, and Maik Gude. “Computed Tomography Investigation of the Material Structure in Clinch Joints in Aluminium Fibre-Reinforced Thermoplastic Sheets.” <i>Production Engineering</i> 16, no. 2–3 (2021): 203–12. <a href=\"https://doi.org/10.1007/s11740-021-01091-x\">https://doi.org/10.1007/s11740-021-01091-x</a>.","ieee":"B. Gröger <i>et al.</i>, “Computed tomography investigation of the material structure in clinch joints in aluminium fibre-reinforced thermoplastic sheets,” <i>Production Engineering</i>, vol. 16, no. 2–3, pp. 203–212, 2021, doi: <a href=\"https://doi.org/10.1007/s11740-021-01091-x\">10.1007/s11740-021-01091-x</a>.","bibtex":"@article{Gröger_Köhler_Vorderbrüggen_Troschitz_Kupfer_Meschut_Gude_2021, title={Computed tomography investigation of the material structure in clinch joints in aluminium fibre-reinforced thermoplastic sheets}, volume={16}, DOI={<a href=\"https://doi.org/10.1007/s11740-021-01091-x\">10.1007/s11740-021-01091-x</a>}, number={2–3}, journal={Production Engineering}, publisher={Springer Science and Business Media LLC}, author={Gröger, Benjamin and Köhler, Daniel and Vorderbrüggen, Julian and Troschitz, Juliane and Kupfer, Robert and Meschut, Gerson and Gude, Maik}, year={2021}, pages={203–212} }","mla":"Gröger, Benjamin, et al. “Computed Tomography Investigation of the Material Structure in Clinch Joints in Aluminium Fibre-Reinforced Thermoplastic Sheets.” <i>Production Engineering</i>, vol. 16, no. 2–3, Springer Science and Business Media LLC, 2021, pp. 203–12, doi:<a href=\"https://doi.org/10.1007/s11740-021-01091-x\">10.1007/s11740-021-01091-x</a>.","short":"B. Gröger, D. Köhler, J. Vorderbrüggen, J. Troschitz, R. Kupfer, G. Meschut, M. Gude, Production Engineering 16 (2021) 203–212.","apa":"Gröger, B., Köhler, D., Vorderbrüggen, J., Troschitz, J., Kupfer, R., Meschut, G., &#38; Gude, M. (2021). Computed tomography investigation of the material structure in clinch joints in aluminium fibre-reinforced thermoplastic sheets. <i>Production Engineering</i>, <i>16</i>(2–3), 203–212. <a href=\"https://doi.org/10.1007/s11740-021-01091-x\">https://doi.org/10.1007/s11740-021-01091-x</a>"},"language":[{"iso":"eng"}],"keyword":["Industrial and Manufacturing Engineering","Mechanical Engineering"],"publication":"Production Engineering","abstract":[{"lang":"eng","text":"<jats:title>Abstract</jats:title><jats:p>Recent developments in automotive and aircraft industry towards a multi-material design pose challenges for modern joining technologies due to different mechanical properties and material compositions of various materials such as composites and metals. Therefore, mechanical joining technologies like clinching are in the focus of current research activities. For multi-material joints of metals and thermoplastic composites thermally assisted clinching processes with advanced tool concepts are well developed. The material-specific properties of fibre-reinforced thermoplastics have a significant influence on the joining process and the resulting material structure in the joining zone. For this reason, it is important to investigate these influences in detail and to understand the phenomena occurring during the joining process. Additionally, this provides the basis for a validation of a numerical simulation of such joining processes. In this paper, the material structure in a joint resulting from a thermally assisted clinching process is investigated. The joining partners are an aluminium sheet and a thermoplastic composite (organo sheet). Using computed tomography enables a three-dimensional investigation that allows a detailed analysis of the phenomena in different joining stages and in the material structure of the finished joint. Consequently, this study provides a more detailed understanding of the material behavior of thermoplastic composites during thermally assisted clinching.</jats:p>"}],"date_created":"2024-02-06T15:05:29Z","publisher":"Springer Science and Business Media LLC","title":"Computed tomography investigation of the material structure in clinch joints in aluminium fibre-reinforced thermoplastic sheets","issue":"2-3","year":"2021"},{"keyword":["Industrial and Manufacturing Engineering","Environmental Engineering"],"language":[{"iso":"eng"}],"_id":"34115","project":[{"_id":"1","name":"SFB 901: SFB 901"},{"name":"SFB 901 - A3: SFB 901 - Subproject A3","_id":"7"},{"_id":"2","name":"SFB 901 - A: SFB 901 - Project Area A"}],"department":[{"_id":"205"},{"_id":"475"}],"user_id":"477","status":"public","publication":"Homo Oeconomicus","type":"journal_article","title":"Introduction to the Special Issue “Bargaining”","doi":"10.1007/s41412-020-00104-x","publisher":"Springer Science and Business Media LLC","date_updated":"2022-11-30T13:29:13Z","volume":37,"date_created":"2022-11-19T15:44:21Z","author":[{"first_name":"Claus-Jochen","last_name":"Haake","id":"20801","full_name":"Haake, Claus-Jochen"},{"first_name":"Walter","full_name":"Trockel, Walter","last_name":"Trockel"}],"year":"2020","intvolume":"        37","page":"1-6","citation":{"short":"C.-J. Haake, W. Trockel, Homo Oeconomicus 37 (2020) 1–6.","bibtex":"@article{Haake_Trockel_2020, title={Introduction to the Special Issue “Bargaining”}, volume={37}, DOI={<a href=\"https://doi.org/10.1007/s41412-020-00104-x\">10.1007/s41412-020-00104-x</a>}, number={1–2}, journal={Homo Oeconomicus}, publisher={Springer Science and Business Media LLC}, author={Haake, Claus-Jochen and Trockel, Walter}, year={2020}, pages={1–6} }","mla":"Haake, Claus-Jochen, and Walter Trockel. “Introduction to the Special Issue ‘Bargaining.’” <i>Homo Oeconomicus</i>, vol. 37, no. 1–2, Springer Science and Business Media LLC, 2020, pp. 1–6, doi:<a href=\"https://doi.org/10.1007/s41412-020-00104-x\">10.1007/s41412-020-00104-x</a>.","apa":"Haake, C.-J., &#38; Trockel, W. (2020). Introduction to the Special Issue “Bargaining.” <i>Homo Oeconomicus</i>, <i>37</i>(1–2), 1–6. <a href=\"https://doi.org/10.1007/s41412-020-00104-x\">https://doi.org/10.1007/s41412-020-00104-x</a>","ieee":"C.-J. Haake and W. Trockel, “Introduction to the Special Issue ‘Bargaining,’” <i>Homo Oeconomicus</i>, vol. 37, no. 1–2, pp. 1–6, 2020, doi: <a href=\"https://doi.org/10.1007/s41412-020-00104-x\">10.1007/s41412-020-00104-x</a>.","chicago":"Haake, Claus-Jochen, and Walter Trockel. “Introduction to the Special Issue ‘Bargaining.’” <i>Homo Oeconomicus</i> 37, no. 1–2 (2020): 1–6. <a href=\"https://doi.org/10.1007/s41412-020-00104-x\">https://doi.org/10.1007/s41412-020-00104-x</a>.","ama":"Haake C-J, Trockel W. Introduction to the Special Issue “Bargaining.” <i>Homo Oeconomicus</i>. 2020;37(1-2):1-6. doi:<a href=\"https://doi.org/10.1007/s41412-020-00104-x\">10.1007/s41412-020-00104-x</a>"},"publication_identifier":{"issn":["0943-0180","2366-6161"]},"publication_status":"published","issue":"1-2"},{"doi":"10.1002/rnc.5003","author":[{"first_name":"Moritz","full_name":"Schulze Darup, Moritz","last_name":"Schulze Darup"}],"volume":30,"date_updated":"2023-01-09T16:36:57Z","citation":{"ieee":"M. Schulze Darup, “Encrypted polynomial control based on tailored two‐party computation,” <i>International Journal of Robust and Nonlinear Control</i>, vol. 30, no. 11, pp. 4168–4187, 2020, doi: <a href=\"https://doi.org/10.1002/rnc.5003\">10.1002/rnc.5003</a>.","chicago":"Schulze Darup, Moritz. “Encrypted Polynomial Control Based on Tailored Two‐party Computation.” <i>International Journal of Robust and Nonlinear Control</i> 30, no. 11 (2020): 4168–87. <a href=\"https://doi.org/10.1002/rnc.5003\">https://doi.org/10.1002/rnc.5003</a>.","ama":"Schulze Darup M. Encrypted polynomial control based on tailored two‐party computation. <i>International Journal of Robust and Nonlinear Control</i>. 2020;30(11):4168-4187. doi:<a href=\"https://doi.org/10.1002/rnc.5003\">10.1002/rnc.5003</a>","mla":"Schulze Darup, Moritz. “Encrypted Polynomial Control Based on Tailored Two‐party Computation.” <i>International Journal of Robust and Nonlinear Control</i>, vol. 30, no. 11, Wiley, 2020, pp. 4168–87, doi:<a href=\"https://doi.org/10.1002/rnc.5003\">10.1002/rnc.5003</a>.","short":"M. Schulze Darup, International Journal of Robust and Nonlinear Control 30 (2020) 4168–4187.","bibtex":"@article{Schulze Darup_2020, title={Encrypted polynomial control based on tailored two‐party computation}, volume={30}, DOI={<a href=\"https://doi.org/10.1002/rnc.5003\">10.1002/rnc.5003</a>}, number={11}, journal={International Journal of Robust and Nonlinear Control}, publisher={Wiley}, author={Schulze Darup, Moritz}, year={2020}, pages={4168–4187} }","apa":"Schulze Darup, M. (2020). Encrypted polynomial control based on tailored two‐party computation. <i>International Journal of Robust and Nonlinear Control</i>, <i>30</i>(11), 4168–4187. <a href=\"https://doi.org/10.1002/rnc.5003\">https://doi.org/10.1002/rnc.5003</a>"},"intvolume":"        30","page":"4168-4187","publication_status":"published","publication_identifier":{"issn":["1049-8923","1099-1239"]},"user_id":"158","department":[{"_id":"622"}],"_id":"35580","status":"public","type":"journal_article","title":"Encrypted polynomial control based on tailored two‐party computation","date_created":"2023-01-09T16:36:47Z","publisher":"Wiley","year":"2020","issue":"11","language":[{"iso":"eng"}],"keyword":["Electrical and Electronic Engineering","Industrial and Manufacturing Engineering","Mechanical Engineering","Aerospace Engineering","Biomedical Engineering","General Chemical Engineering","Control and Systems Engineering"],"publication":"International Journal of Robust and Nonlinear Control"},{"status":"public","type":"journal_article","publication":"International Journal of Robust and Nonlinear Control","language":[{"iso":"eng"}],"keyword":["Electrical and Electronic Engineering","Industrial and Manufacturing Engineering","Mechanical Engineering","Aerospace Engineering","Biomedical Engineering","General Chemical Engineering","Control and Systems Engineering"],"user_id":"158","department":[{"_id":"57"}],"_id":"35585","citation":{"apa":"Lu, J., Leong, A. S., &#38; Quevedo, D. E. (2020). Optimal event‐triggered transmission scheduling for privacy‐preserving wireless state estimation. <i>International Journal of Robust and Nonlinear Control</i>, <i>30</i>(11), 4205–4224. <a href=\"https://doi.org/10.1002/rnc.4910\">https://doi.org/10.1002/rnc.4910</a>","short":"J. Lu, A.S. Leong, D.E. Quevedo, International Journal of Robust and Nonlinear Control 30 (2020) 4205–4224.","bibtex":"@article{Lu_Leong_Quevedo_2020, title={Optimal event‐triggered transmission scheduling for privacy‐preserving wireless state estimation}, volume={30}, DOI={<a href=\"https://doi.org/10.1002/rnc.4910\">10.1002/rnc.4910</a>}, number={11}, journal={International Journal of Robust and Nonlinear Control}, publisher={Wiley}, author={Lu, Jingyi and Leong, Alex S. and Quevedo, Daniel E.}, year={2020}, pages={4205–4224} }","mla":"Lu, Jingyi, et al. “Optimal Event‐triggered Transmission Scheduling for Privacy‐preserving Wireless State Estimation.” <i>International Journal of Robust and Nonlinear Control</i>, vol. 30, no. 11, Wiley, 2020, pp. 4205–24, doi:<a href=\"https://doi.org/10.1002/rnc.4910\">10.1002/rnc.4910</a>.","ama":"Lu J, Leong AS, Quevedo DE. Optimal event‐triggered transmission scheduling for privacy‐preserving wireless state estimation. <i>International Journal of Robust and Nonlinear Control</i>. 2020;30(11):4205-4224. doi:<a href=\"https://doi.org/10.1002/rnc.4910\">10.1002/rnc.4910</a>","chicago":"Lu, Jingyi, Alex S. Leong, and Daniel E. Quevedo. “Optimal Event‐triggered Transmission Scheduling for Privacy‐preserving Wireless State Estimation.” <i>International Journal of Robust and Nonlinear Control</i> 30, no. 11 (2020): 4205–24. <a href=\"https://doi.org/10.1002/rnc.4910\">https://doi.org/10.1002/rnc.4910</a>.","ieee":"J. Lu, A. S. Leong, and D. E. Quevedo, “Optimal event‐triggered transmission scheduling for privacy‐preserving wireless state estimation,” <i>International Journal of Robust and Nonlinear Control</i>, vol. 30, no. 11, pp. 4205–4224, 2020, doi: <a href=\"https://doi.org/10.1002/rnc.4910\">10.1002/rnc.4910</a>."},"intvolume":"        30","page":"4205-4224","year":"2020","issue":"11","publication_status":"published","publication_identifier":{"issn":["1049-8923","1099-1239"]},"doi":"10.1002/rnc.4910","title":"Optimal event‐triggered transmission scheduling for privacy‐preserving wireless state estimation","author":[{"first_name":"Jingyi","full_name":"Lu, Jingyi","last_name":"Lu"},{"first_name":"Alex S.","full_name":"Leong, Alex S.","last_name":"Leong"},{"first_name":"Daniel E.","full_name":"Quevedo, Daniel E.","last_name":"Quevedo"}],"date_created":"2023-01-09T16:46:15Z","volume":30,"publisher":"Wiley","date_updated":"2023-01-09T16:46:29Z"},{"year":"2020","issue":"7","quality_controlled":"1","title":"Separation Units 4.0 – Trennapparate heute und morgen","date_created":"2023-10-04T14:18:32Z","publisher":"Wiley","abstract":[{"lang":"eng","text":"<jats:title>Abstract</jats:title><jats:p>Die chemische Industrie sieht sich mit gravierenden Herausforderungen konfrontiert: Die Einhaltung der Klimaschutzziele, die Auswirkungen der Energiewende und die zunehmende Bedeutung der Kreislaufwirtschaft treffen die gesamte Wertschöpfungskette. Lösungsansätze von der Prozess‐ über die Apparateebene bis hin zum Einzelphänomen sind notwendig, um die Wettbewerbsfähigkeit dieses zentralen Industriezweigs zu erhalten. In diesem Beitrag werden aktuelle Entwicklungen und zukünftige Handlungsfelder in der Trenntechnik, die für diese Herausforderungen wertvolle Beiträge leisten können, dargestellt.</jats:p>"}],"publication":"Chemie Ingenieur Technik","language":[{"iso":"ger"}],"keyword":["Industrial and Manufacturing Engineering","General Chemical Engineering","General Chemistry"],"intvolume":"        92","page":"818-830","citation":{"mla":"Riese, Julia, et al. “Separation Units 4.0 – Trennapparate heute und morgen.” <i>Chemie Ingenieur Technik</i>, vol. 92, no. 7, Wiley, 2020, pp. 818–30, doi:<a href=\"https://doi.org/10.1002/cite.202000032\">10.1002/cite.202000032</a>.","bibtex":"@article{Riese_Hoff_Stock_Górak_Grünewald_2020, title={Separation Units 4.0 – Trennapparate heute und morgen}, volume={92}, DOI={<a href=\"https://doi.org/10.1002/cite.202000032\">10.1002/cite.202000032</a>}, number={7}, journal={Chemie Ingenieur Technik}, publisher={Wiley}, author={Riese, Julia and Hoff, Andreas and Stock, Jürgen and Górak, Andrzej and Grünewald, Marcus}, year={2020}, pages={818–830} }","short":"J. Riese, A. Hoff, J. Stock, A. Górak, M. Grünewald, Chemie Ingenieur Technik 92 (2020) 818–830.","apa":"Riese, J., Hoff, A., Stock, J., Górak, A., &#38; Grünewald, M. (2020). Separation Units 4.0 – Trennapparate heute und morgen. <i>Chemie Ingenieur Technik</i>, <i>92</i>(7), 818–830. <a href=\"https://doi.org/10.1002/cite.202000032\">https://doi.org/10.1002/cite.202000032</a>","ama":"Riese J, Hoff A, Stock J, Górak A, Grünewald M. Separation Units 4.0 – Trennapparate heute und morgen. <i>Chemie Ingenieur Technik</i>. 2020;92(7):818-830. doi:<a href=\"https://doi.org/10.1002/cite.202000032\">10.1002/cite.202000032</a>","ieee":"J. Riese, A. Hoff, J. Stock, A. Górak, and M. Grünewald, “Separation Units 4.0 – Trennapparate heute und morgen,” <i>Chemie Ingenieur Technik</i>, vol. 92, no. 7, pp. 818–830, 2020, doi: <a href=\"https://doi.org/10.1002/cite.202000032\">10.1002/cite.202000032</a>.","chicago":"Riese, Julia, Andreas Hoff, Jürgen Stock, Andrzej Górak, and Marcus Grünewald. “Separation Units 4.0 – Trennapparate heute und morgen.” <i>Chemie Ingenieur Technik</i> 92, no. 7 (2020): 818–30. <a href=\"https://doi.org/10.1002/cite.202000032\">https://doi.org/10.1002/cite.202000032</a>."},"publication_identifier":{"issn":["0009-286X","1522-2640"]},"publication_status":"published","doi":"10.1002/cite.202000032","volume":92,"author":[{"first_name":"Julia","full_name":"Riese, Julia","id":"101499","orcid":"0000-0002-3053-0534","last_name":"Riese"},{"last_name":"Hoff","full_name":"Hoff, Andreas","first_name":"Andreas"},{"first_name":"Jürgen","last_name":"Stock","full_name":"Stock, Jürgen"},{"first_name":"Andrzej","full_name":"Górak, Andrzej","last_name":"Górak"},{"last_name":"Grünewald","full_name":"Grünewald, Marcus","first_name":"Marcus"}],"date_updated":"2024-03-08T11:33:38Z","status":"public","type":"journal_article","extern":"1","user_id":"101499","_id":"47579"},{"quality_controlled":"1","issue":"6","year":"2020","publisher":"Wiley","date_created":"2023-10-04T14:17:28Z","title":"Transformable Decentral Production for Local Economies with Minimized Carbon Footprint","publication":"ChemBioEng Reviews","abstract":[{"text":"<jats:title>Abstract</jats:title><jats:p>Due to high energy‐intensive processes and a dependence on carbon‐based materials, the process industry plays a major role in climate change. Therefore, the substitution of fossil resources by bio‐based resources is indispensable. This leads to challenges arising from accompanying changes of the type, amount and location of resources. At the same time, transformable production systems are currently in the focus of research addressing the required flexibility. These systems which consist of modular production and logistics units offer the possibility to adapt flexibly in volatile conditions within dynamic supply chains. Hence, this work compiles elements for environmental sustainability, which minimize the carbon footprint in the process industry: transformable production systems, the utilization of bio‐based resources, carbon dioxide and renewable energy as well as the application of these elements in decentral production networks. Finally, possible use cases are determined based on the combination of these elements through a multi‐criteria analysis.</jats:p>","lang":"eng"}],"keyword":["Industrial and Manufacturing Engineering","Filtration and Separation","Process Chemistry and Technology","Biochemistry","Chemical Engineering (miscellaneous)","Bioengineering"],"language":[{"iso":"eng"}],"publication_identifier":{"issn":["2196-9744","2196-9744"]},"publication_status":"published","intvolume":"         7","page":"216-228","citation":{"ama":"Pannok M, Finkbeiner M, Fasel H, Riese J, Lier S. Transformable Decentral Production for Local Economies with Minimized Carbon Footprint. <i>ChemBioEng Reviews</i>. 2020;7(6):216-228. doi:<a href=\"https://doi.org/10.1002/cben.202000008\">10.1002/cben.202000008</a>","ieee":"M. Pannok, M. Finkbeiner, H. Fasel, J. Riese, and S. Lier, “Transformable Decentral Production for Local Economies with Minimized Carbon Footprint,” <i>ChemBioEng Reviews</i>, vol. 7, no. 6, pp. 216–228, 2020, doi: <a href=\"https://doi.org/10.1002/cben.202000008\">10.1002/cben.202000008</a>.","chicago":"Pannok, Maik, Marco Finkbeiner, Henrik Fasel, Julia Riese, and Stefan Lier. “Transformable Decentral Production for Local Economies with Minimized Carbon Footprint.” <i>ChemBioEng Reviews</i> 7, no. 6 (2020): 216–28. <a href=\"https://doi.org/10.1002/cben.202000008\">https://doi.org/10.1002/cben.202000008</a>.","apa":"Pannok, M., Finkbeiner, M., Fasel, H., Riese, J., &#38; Lier, S. (2020). Transformable Decentral Production for Local Economies with Minimized Carbon Footprint. <i>ChemBioEng Reviews</i>, <i>7</i>(6), 216–228. <a href=\"https://doi.org/10.1002/cben.202000008\">https://doi.org/10.1002/cben.202000008</a>","bibtex":"@article{Pannok_Finkbeiner_Fasel_Riese_Lier_2020, title={Transformable Decentral Production for Local Economies with Minimized Carbon Footprint}, volume={7}, DOI={<a href=\"https://doi.org/10.1002/cben.202000008\">10.1002/cben.202000008</a>}, number={6}, journal={ChemBioEng Reviews}, publisher={Wiley}, author={Pannok, Maik and Finkbeiner, Marco and Fasel, Henrik and Riese, Julia and Lier, Stefan}, year={2020}, pages={216–228} }","short":"M. Pannok, M. Finkbeiner, H. Fasel, J. Riese, S. Lier, ChemBioEng Reviews 7 (2020) 216–228.","mla":"Pannok, Maik, et al. “Transformable Decentral Production for Local Economies with Minimized Carbon Footprint.” <i>ChemBioEng Reviews</i>, vol. 7, no. 6, Wiley, 2020, pp. 216–28, doi:<a href=\"https://doi.org/10.1002/cben.202000008\">10.1002/cben.202000008</a>."},"date_updated":"2024-03-08T11:37:09Z","volume":7,"author":[{"first_name":"Maik","last_name":"Pannok","full_name":"Pannok, Maik"},{"first_name":"Marco","last_name":"Finkbeiner","full_name":"Finkbeiner, Marco"},{"first_name":"Henrik","full_name":"Fasel, Henrik","last_name":"Fasel"},{"first_name":"Julia","full_name":"Riese, Julia","id":"101499","last_name":"Riese","orcid":"0000-0002-3053-0534"},{"full_name":"Lier, Stefan","last_name":"Lier","first_name":"Stefan"}],"doi":"10.1002/cben.202000008","type":"journal_article","status":"public","_id":"47572","user_id":"101499","extern":"1"},{"publication_status":"published","publication_identifier":{"issn":["0009-286X","1522-2640"]},"citation":{"bibtex":"@article{Finkbeiner_Pannok_Fasel_Riese_Lier_2020, title={Modular Production with Bio‐Based Resources in a Decentral Production Network}, volume={92}, DOI={<a href=\"https://doi.org/10.1002/cite.202000072\">10.1002/cite.202000072</a>}, number={12}, journal={Chemie Ingenieur Technik}, publisher={Wiley}, author={Finkbeiner, Marco and Pannok, Maik and Fasel, Henrik and Riese, Julia and Lier, Stefan}, year={2020}, pages={2041–2045} }","mla":"Finkbeiner, Marco, et al. “Modular Production with Bio‐Based Resources in a Decentral Production Network.” <i>Chemie Ingenieur Technik</i>, vol. 92, no. 12, Wiley, 2020, pp. 2041–45, doi:<a href=\"https://doi.org/10.1002/cite.202000072\">10.1002/cite.202000072</a>.","short":"M. Finkbeiner, M. Pannok, H. Fasel, J. Riese, S. Lier, Chemie Ingenieur Technik 92 (2020) 2041–2045.","apa":"Finkbeiner, M., Pannok, M., Fasel, H., Riese, J., &#38; Lier, S. (2020). Modular Production with Bio‐Based Resources in a Decentral Production Network. <i>Chemie Ingenieur Technik</i>, <i>92</i>(12), 2041–2045. <a href=\"https://doi.org/10.1002/cite.202000072\">https://doi.org/10.1002/cite.202000072</a>","ama":"Finkbeiner M, Pannok M, Fasel H, Riese J, Lier S. Modular Production with Bio‐Based Resources in a Decentral Production Network. <i>Chemie Ingenieur Technik</i>. 2020;92(12):2041-2045. doi:<a href=\"https://doi.org/10.1002/cite.202000072\">10.1002/cite.202000072</a>","chicago":"Finkbeiner, Marco, Maik Pannok, Henrik Fasel, Julia Riese, and Stefan Lier. “Modular Production with Bio‐Based Resources in a Decentral Production Network.” <i>Chemie Ingenieur Technik</i> 92, no. 12 (2020): 2041–45. <a href=\"https://doi.org/10.1002/cite.202000072\">https://doi.org/10.1002/cite.202000072</a>.","ieee":"M. Finkbeiner, M. Pannok, H. Fasel, J. Riese, and S. Lier, “Modular Production with Bio‐Based Resources in a Decentral Production Network,” <i>Chemie Ingenieur Technik</i>, vol. 92, no. 12, pp. 2041–2045, 2020, doi: <a href=\"https://doi.org/10.1002/cite.202000072\">10.1002/cite.202000072</a>."},"page":"2041-2045","intvolume":"        92","date_updated":"2024-03-08T11:33:48Z","author":[{"first_name":"Marco","last_name":"Finkbeiner","full_name":"Finkbeiner, Marco"},{"first_name":"Maik","last_name":"Pannok","full_name":"Pannok, Maik"},{"full_name":"Fasel, Henrik","last_name":"Fasel","first_name":"Henrik"},{"orcid":"0000-0002-3053-0534","last_name":"Riese","full_name":"Riese, Julia","id":"101499","first_name":"Julia"},{"first_name":"Stefan","last_name":"Lier","full_name":"Lier, Stefan"}],"volume":92,"doi":"10.1002/cite.202000072","type":"journal_article","status":"public","_id":"47578","user_id":"101499","extern":"1","quality_controlled":"1","issue":"12","year":"2020","publisher":"Wiley","date_created":"2023-10-04T14:18:23Z","title":"Modular Production with Bio‐Based Resources in a Decentral Production Network","publication":"Chemie Ingenieur Technik","abstract":[{"lang":"eng","text":"<jats:title>Abstract</jats:title><jats:p>The change in process industry from fossil resources to alternative feedstock is indispensable due to the scarcity of resources and global warming. This leads to new challenges for the production systems. On the market side, rapid innovation is accompanied by shorter product life cycles leading to an increasing uncertainty of demand in terms of product type, volume and location. Therefore, the following five elements are combined into a concept to address these challenges: transformable production systems, local bio‐based resources, CO<jats:sub>2</jats:sub> as feedstock, renewable energy and decentral production network with local economies.</jats:p>"}],"keyword":["Industrial and Manufacturing Engineering","General Chemical Engineering","General Chemistry"],"language":[{"iso":"eng"}]},{"publication":"Chemie Ingenieur Technik","abstract":[{"lang":"eng","text":"<jats:title>Abstract</jats:title><jats:p>In this paper, a newly designed distillation column consisting of a wetted wall with a rectangular cross section is analyzed and compared with a conventional packed column with regard to the operating range of both apparatuses. As expected, the pressure drop is considerably lower in the wetted‐wall column and, therefore, it offers a higher range of operation. However, in the wetted‐wall column, the separation efficiency decreases rapidly with increasing <jats:italic>F</jats:italic> factors. This effect can be overcome by the serial connection of two wetted‐wall columns.</jats:p>"}],"keyword":["Industrial and Manufacturing Engineering","General Chemical Engineering","General Chemistry"],"language":[{"iso":"eng"}],"quality_controlled":"1","issue":"12","year":"2020","publisher":"Wiley","date_created":"2023-10-04T14:17:45Z","title":"Comparison of the Operating Range of a Wetted‐Wall Column with a Packed Column for Distillation","type":"journal_article","status":"public","_id":"47574","user_id":"101499","extern":"1","publication_status":"published","publication_identifier":{"issn":["0009-286X","1522-2640"]},"citation":{"apa":"Reitze, A., Grünewald, M., &#38; Riese, J. (2020). Comparison of the Operating Range of a Wetted‐Wall Column with a Packed Column for Distillation. <i>Chemie Ingenieur Technik</i>, <i>92</i>(12), 1968–1975. <a href=\"https://doi.org/10.1002/cite.202000065\">https://doi.org/10.1002/cite.202000065</a>","mla":"Reitze, Arnulf, et al. “Comparison of the Operating Range of a Wetted‐Wall Column with a Packed Column for Distillation.” <i>Chemie Ingenieur Technik</i>, vol. 92, no. 12, Wiley, 2020, pp. 1968–75, doi:<a href=\"https://doi.org/10.1002/cite.202000065\">10.1002/cite.202000065</a>.","short":"A. Reitze, M. Grünewald, J. Riese, Chemie Ingenieur Technik 92 (2020) 1968–1975.","bibtex":"@article{Reitze_Grünewald_Riese_2020, title={Comparison of the Operating Range of a Wetted‐Wall Column with a Packed Column for Distillation}, volume={92}, DOI={<a href=\"https://doi.org/10.1002/cite.202000065\">10.1002/cite.202000065</a>}, number={12}, journal={Chemie Ingenieur Technik}, publisher={Wiley}, author={Reitze, Arnulf and Grünewald, Marcus and Riese, Julia}, year={2020}, pages={1968–1975} }","ama":"Reitze A, Grünewald M, Riese J. Comparison of the Operating Range of a Wetted‐Wall Column with a Packed Column for Distillation. <i>Chemie Ingenieur Technik</i>. 2020;92(12):1968-1975. doi:<a href=\"https://doi.org/10.1002/cite.202000065\">10.1002/cite.202000065</a>","chicago":"Reitze, Arnulf, Marcus Grünewald, and Julia Riese. “Comparison of the Operating Range of a Wetted‐Wall Column with a Packed Column for Distillation.” <i>Chemie Ingenieur Technik</i> 92, no. 12 (2020): 1968–75. <a href=\"https://doi.org/10.1002/cite.202000065\">https://doi.org/10.1002/cite.202000065</a>.","ieee":"A. Reitze, M. Grünewald, and J. Riese, “Comparison of the Operating Range of a Wetted‐Wall Column with a Packed Column for Distillation,” <i>Chemie Ingenieur Technik</i>, vol. 92, no. 12, pp. 1968–1975, 2020, doi: <a href=\"https://doi.org/10.1002/cite.202000065\">10.1002/cite.202000065</a>."},"intvolume":"        92","page":"1968-1975","date_updated":"2024-03-08T11:34:41Z","author":[{"first_name":"Arnulf","last_name":"Reitze","full_name":"Reitze, Arnulf"},{"full_name":"Grünewald, Marcus","last_name":"Grünewald","first_name":"Marcus"},{"orcid":"0000-0002-3053-0534","last_name":"Riese","id":"101499","full_name":"Riese, Julia","first_name":"Julia"}],"volume":92,"doi":"10.1002/cite.202000065"},{"keyword":["Industrial and Manufacturing Engineering","General Chemical Engineering","General Chemistry"],"language":[{"iso":"eng"}],"publication":"Chemie Ingenieur Technik","abstract":[{"lang":"eng","text":"<jats:title>Abstract</jats:title><jats:p>This study presents a new and innovative sieve tray design for a more flexible operation of separation columns in terms of possible throughput. The advantage of this new tray design is to ensure an optimal operation for varying feed flow rates and constant separation efficiencies for different load ranges. The aim of this work is to give a short introduction and an outlook to the investigation of the functionality of the designed trays. Moreover, the general design of the new trays, first results for CFD simulations of the dry pressure drop and the experimental setup are presented.</jats:p>"}],"publisher":"Wiley","date_created":"2023-10-04T14:18:10Z","title":"New Column Design to Enhance Flexibility: Concept for Hydrodynamic Characterization","quality_controlled":"1","issue":"12","year":"2020","_id":"47577","user_id":"101499","extern":"1","type":"journal_article","status":"public","date_updated":"2024-03-08T11:34:02Z","volume":92,"author":[{"full_name":"Fasel, Henrik","last_name":"Fasel","first_name":"Henrik"},{"first_name":"Marcus","full_name":"Grünewald, Marcus","last_name":"Grünewald"},{"first_name":"Julia","last_name":"Riese","orcid":"0000-0002-3053-0534","full_name":"Riese, Julia","id":"101499"}],"doi":"10.1002/cite.202000055","publication_identifier":{"issn":["0009-286X","1522-2640"]},"publication_status":"published","intvolume":"        92","page":"2035-2040","citation":{"apa":"Fasel, H., Grünewald, M., &#38; Riese, J. (2020). New Column Design to Enhance Flexibility: Concept for Hydrodynamic Characterization. <i>Chemie Ingenieur Technik</i>, <i>92</i>(12), 2035–2040. <a href=\"https://doi.org/10.1002/cite.202000055\">https://doi.org/10.1002/cite.202000055</a>","bibtex":"@article{Fasel_Grünewald_Riese_2020, title={New Column Design to Enhance Flexibility: Concept for Hydrodynamic Characterization}, volume={92}, DOI={<a href=\"https://doi.org/10.1002/cite.202000055\">10.1002/cite.202000055</a>}, number={12}, journal={Chemie Ingenieur Technik}, publisher={Wiley}, author={Fasel, Henrik and Grünewald, Marcus and Riese, Julia}, year={2020}, pages={2035–2040} }","mla":"Fasel, Henrik, et al. “New Column Design to Enhance Flexibility: Concept for Hydrodynamic Characterization.” <i>Chemie Ingenieur Technik</i>, vol. 92, no. 12, Wiley, 2020, pp. 2035–40, doi:<a href=\"https://doi.org/10.1002/cite.202000055\">10.1002/cite.202000055</a>.","short":"H. Fasel, M. Grünewald, J. Riese, Chemie Ingenieur Technik 92 (2020) 2035–2040.","ieee":"H. Fasel, M. Grünewald, and J. Riese, “New Column Design to Enhance Flexibility: Concept for Hydrodynamic Characterization,” <i>Chemie Ingenieur Technik</i>, vol. 92, no. 12, pp. 2035–2040, 2020, doi: <a href=\"https://doi.org/10.1002/cite.202000055\">10.1002/cite.202000055</a>.","chicago":"Fasel, Henrik, Marcus Grünewald, and Julia Riese. “New Column Design to Enhance Flexibility: Concept for Hydrodynamic Characterization.” <i>Chemie Ingenieur Technik</i> 92, no. 12 (2020): 2035–40. <a href=\"https://doi.org/10.1002/cite.202000055\">https://doi.org/10.1002/cite.202000055</a>.","ama":"Fasel H, Grünewald M, Riese J. New Column Design to Enhance Flexibility: Concept for Hydrodynamic Characterization. <i>Chemie Ingenieur Technik</i>. 2020;92(12):2035-2040. doi:<a href=\"https://doi.org/10.1002/cite.202000055\">10.1002/cite.202000055</a>"}},{"quality_controlled":"1","issue":"12","year":"2020","publisher":"Wiley","date_created":"2023-10-04T14:17:54Z","title":"Flexibility of Power‐to‐Gas Plants: A Case Study","publication":"Chemie Ingenieur Technik","abstract":[{"text":"<jats:title>Abstract</jats:title><jats:p>Due to the increasing share of renewable energies in the power sector, the need for energy storage and flexible performance is rising. This study provides an in‐depth investigation of the flexibility of a Power‐to‐Gas plant for the production of synthetic natural gas. Model‐based analysis is conducted for the individual technologies PEM electrolysis, MEA absorption and fixed‐bed methanation as well as for the continuously operated process. This study reveals that the Power‐to‐Gas plant offers a capacity flexibility of 87–125 %, corresponding to 4.79–6.88 MW electrical input power.</jats:p>","lang":"eng"}],"keyword":["Industrial and Manufacturing Engineering","General Chemical Engineering","General Chemistry"],"language":[{"iso":"eng"}],"publication_identifier":{"issn":["0009-286X","1522-2640"]},"publication_status":"published","intvolume":"        92","page":"1983-1991","citation":{"ama":"Herrmann F, Grünewald M, Riese J. Flexibility of Power‐to‐Gas Plants: A Case Study. <i>Chemie Ingenieur Technik</i>. 2020;92(12):1983-1991. doi:<a href=\"https://doi.org/10.1002/cite.202000063\">10.1002/cite.202000063</a>","chicago":"Herrmann, Felix, Marcus Grünewald, and Julia Riese. “Flexibility of Power‐to‐Gas Plants: A Case Study.” <i>Chemie Ingenieur Technik</i> 92, no. 12 (2020): 1983–91. <a href=\"https://doi.org/10.1002/cite.202000063\">https://doi.org/10.1002/cite.202000063</a>.","ieee":"F. Herrmann, M. Grünewald, and J. Riese, “Flexibility of Power‐to‐Gas Plants: A Case Study,” <i>Chemie Ingenieur Technik</i>, vol. 92, no. 12, pp. 1983–1991, 2020, doi: <a href=\"https://doi.org/10.1002/cite.202000063\">10.1002/cite.202000063</a>.","short":"F. Herrmann, M. Grünewald, J. Riese, Chemie Ingenieur Technik 92 (2020) 1983–1991.","mla":"Herrmann, Felix, et al. “Flexibility of Power‐to‐Gas Plants: A Case Study.” <i>Chemie Ingenieur Technik</i>, vol. 92, no. 12, Wiley, 2020, pp. 1983–91, doi:<a href=\"https://doi.org/10.1002/cite.202000063\">10.1002/cite.202000063</a>.","bibtex":"@article{Herrmann_Grünewald_Riese_2020, title={Flexibility of Power‐to‐Gas Plants: A Case Study}, volume={92}, DOI={<a href=\"https://doi.org/10.1002/cite.202000063\">10.1002/cite.202000063</a>}, number={12}, journal={Chemie Ingenieur Technik}, publisher={Wiley}, author={Herrmann, Felix and Grünewald, Marcus and Riese, Julia}, year={2020}, pages={1983–1991} }","apa":"Herrmann, F., Grünewald, M., &#38; Riese, J. (2020). Flexibility of Power‐to‐Gas Plants: A Case Study. <i>Chemie Ingenieur Technik</i>, <i>92</i>(12), 1983–1991. <a href=\"https://doi.org/10.1002/cite.202000063\">https://doi.org/10.1002/cite.202000063</a>"},"date_updated":"2024-03-08T11:34:23Z","volume":92,"author":[{"last_name":"Herrmann","full_name":"Herrmann, Felix","first_name":"Felix"},{"first_name":"Marcus","last_name":"Grünewald","full_name":"Grünewald, Marcus"},{"last_name":"Riese","orcid":"0000-0002-3053-0534","id":"101499","full_name":"Riese, Julia","first_name":"Julia"}],"doi":"10.1002/cite.202000063","type":"journal_article","status":"public","_id":"47575","user_id":"101499","extern":"1"},{"author":[{"first_name":"Julia","id":"101499","full_name":"Riese, Julia","last_name":"Riese","orcid":"0000-0002-3053-0534"},{"last_name":"Grünewald","full_name":"Grünewald, Marcus","first_name":"Marcus"}],"date_created":"2023-10-04T14:17:38Z","volume":92,"date_updated":"2024-03-08T11:34:49Z","publisher":"Wiley","doi":"10.1002/cite.202000057","title":"Challenges and Opportunities to Enhance Flexibility in Design and Operation of Chemical Processes","issue":"12","publication_status":"published","quality_controlled":"1","publication_identifier":{"issn":["0009-286X","1522-2640"]},"citation":{"ama":"Riese J, Grünewald M. Challenges and Opportunities to Enhance Flexibility in Design and Operation of Chemical Processes. <i>Chemie Ingenieur Technik</i>. 2020;92(12):1887-1897. doi:<a href=\"https://doi.org/10.1002/cite.202000057\">10.1002/cite.202000057</a>","ieee":"J. Riese and M. Grünewald, “Challenges and Opportunities to Enhance Flexibility in Design and Operation of Chemical Processes,” <i>Chemie Ingenieur Technik</i>, vol. 92, no. 12, pp. 1887–1897, 2020, doi: <a href=\"https://doi.org/10.1002/cite.202000057\">10.1002/cite.202000057</a>.","chicago":"Riese, Julia, and Marcus Grünewald. “Challenges and Opportunities to Enhance Flexibility in Design and Operation of Chemical Processes.” <i>Chemie Ingenieur Technik</i> 92, no. 12 (2020): 1887–97. <a href=\"https://doi.org/10.1002/cite.202000057\">https://doi.org/10.1002/cite.202000057</a>.","apa":"Riese, J., &#38; Grünewald, M. (2020). Challenges and Opportunities to Enhance Flexibility in Design and Operation of Chemical Processes. <i>Chemie Ingenieur Technik</i>, <i>92</i>(12), 1887–1897. <a href=\"https://doi.org/10.1002/cite.202000057\">https://doi.org/10.1002/cite.202000057</a>","bibtex":"@article{Riese_Grünewald_2020, title={Challenges and Opportunities to Enhance Flexibility in Design and Operation of Chemical Processes}, volume={92}, DOI={<a href=\"https://doi.org/10.1002/cite.202000057\">10.1002/cite.202000057</a>}, number={12}, journal={Chemie Ingenieur Technik}, publisher={Wiley}, author={Riese, Julia and Grünewald, Marcus}, year={2020}, pages={1887–1897} }","short":"J. Riese, M. Grünewald, Chemie Ingenieur Technik 92 (2020) 1887–1897.","mla":"Riese, Julia, and Marcus Grünewald. “Challenges and Opportunities to Enhance Flexibility in Design and Operation of Chemical Processes.” <i>Chemie Ingenieur Technik</i>, vol. 92, no. 12, Wiley, 2020, pp. 1887–97, doi:<a href=\"https://doi.org/10.1002/cite.202000057\">10.1002/cite.202000057</a>."},"intvolume":"        92","page":"1887-1897","year":"2020","user_id":"101499","_id":"47573","language":[{"iso":"eng"}],"extern":"1","keyword":["Industrial and Manufacturing Engineering","General Chemical Engineering","General Chemistry"],"type":"journal_article","publication":"Chemie Ingenieur Technik","status":"public","abstract":[{"lang":"eng","text":"<jats:title>Abstract</jats:title><jats:p>Flexibility receives increased interest in chemical engineering and is discussed as one measure to deal with upcoming challenges for the chemical industry. In this paper, different types of flexibility are presented, and flexibility needs are illustrated. The focus is on the evaluation and classification of available solutions to enhance flexibility. Solutions and future challenges across all length scales of chemical engineering are discussed: from tailored catalyst properties to decoupling of processes by means of storage.</jats:p>"}]},{"doi":"10.1002/cite.202000053","title":"Analysis of Capacity Potentials in Continuously Operated Chemical Processes","date_created":"2023-10-04T14:18:02Z","author":[{"last_name":"Bruns","full_name":"Bruns, Bastian","first_name":"Bastian"},{"full_name":"Grünewald, Marcus","last_name":"Grünewald","first_name":"Marcus"},{"last_name":"Riese","orcid":"0000-0002-3053-0534","id":"101499","full_name":"Riese, Julia","first_name":"Julia"}],"volume":92,"publisher":"Wiley","date_updated":"2024-03-08T11:34:14Z","citation":{"apa":"Bruns, B., Grünewald, M., &#38; Riese, J. (2020). Analysis of Capacity Potentials in Continuously Operated Chemical Processes. <i>Chemie Ingenieur Technik</i>, <i>92</i>(12), 2005–2015. <a href=\"https://doi.org/10.1002/cite.202000053\">https://doi.org/10.1002/cite.202000053</a>","mla":"Bruns, Bastian, et al. “Analysis of Capacity Potentials in Continuously Operated Chemical Processes.” <i>Chemie Ingenieur Technik</i>, vol. 92, no. 12, Wiley, 2020, pp. 2005–15, doi:<a href=\"https://doi.org/10.1002/cite.202000053\">10.1002/cite.202000053</a>.","short":"B. Bruns, M. Grünewald, J. Riese, Chemie Ingenieur Technik 92 (2020) 2005–2015.","bibtex":"@article{Bruns_Grünewald_Riese_2020, title={Analysis of Capacity Potentials in Continuously Operated Chemical Processes}, volume={92}, DOI={<a href=\"https://doi.org/10.1002/cite.202000053\">10.1002/cite.202000053</a>}, number={12}, journal={Chemie Ingenieur Technik}, publisher={Wiley}, author={Bruns, Bastian and Grünewald, Marcus and Riese, Julia}, year={2020}, pages={2005–2015} }","ama":"Bruns B, Grünewald M, Riese J. Analysis of Capacity Potentials in Continuously Operated Chemical Processes. <i>Chemie Ingenieur Technik</i>. 2020;92(12):2005-2015. doi:<a href=\"https://doi.org/10.1002/cite.202000053\">10.1002/cite.202000053</a>","chicago":"Bruns, Bastian, Marcus Grünewald, and Julia Riese. “Analysis of Capacity Potentials in Continuously Operated Chemical Processes.” <i>Chemie Ingenieur Technik</i> 92, no. 12 (2020): 2005–15. <a href=\"https://doi.org/10.1002/cite.202000053\">https://doi.org/10.1002/cite.202000053</a>.","ieee":"B. Bruns, M. Grünewald, and J. Riese, “Analysis of Capacity Potentials in Continuously Operated Chemical Processes,” <i>Chemie Ingenieur Technik</i>, vol. 92, no. 12, pp. 2005–2015, 2020, doi: <a href=\"https://doi.org/10.1002/cite.202000053\">10.1002/cite.202000053</a>."},"page":"2005-2015","intvolume":"        92","year":"2020","issue":"12","publication_status":"published","quality_controlled":"1","publication_identifier":{"issn":["0009-286X","1522-2640"]},"extern":"1","language":[{"iso":"eng"}],"keyword":["Industrial and Manufacturing Engineering","General Chemical Engineering","General Chemistry"],"user_id":"101499","_id":"47576","status":"public","abstract":[{"lang":"eng","text":"<jats:title>Abstract</jats:title><jats:p>A method is proposed to evaluate capacity potentials in continuously operated chemical processes. In the main part of the analysis, the operating windows of the equipment are examined based on detailed steady‐state simulations. The method is applied to a case study of the production process of ethylene oxide as a large‐scale commodity chemical. Results show the limitations continuously operated processes are confronted with. However, opportunities to enlarge or shift the operating window of apparatuses applied are determined.</jats:p>"}],"type":"journal_article","publication":"Chemie Ingenieur Technik"},{"_id":"32490","department":[{"_id":"728"}],"user_id":"14931","keyword":["Industrial and Manufacturing Engineering","General Chemical Engineering","General Chemistry"],"language":[{"iso":"eng"}],"publication":"Industrial &amp; Engineering Chemistry Research","type":"journal_article","status":"public","date_updated":"2023-01-17T08:29:25Z","publisher":"American Chemical Society (ACS)","volume":59,"date_created":"2022-08-02T10:21:33Z","author":[{"full_name":"Gonchikzhapov, Munko","last_name":"Gonchikzhapov","first_name":"Munko"},{"first_name":"Tina","last_name":"Kasper","orcid":"0000-0003-3993-5316 ","id":"94562","full_name":"Kasper, Tina"}],"title":"Decomposition Reactions of Fe(CO)<sub>5</sub>, Fe(C<sub>5</sub>H<sub>5</sub>)<sub>2</sub>, and TTIP as Precursors for the Spray-Flame Synthesis of Nanoparticles in Partial Spray Evaporation at Low Temperatures","doi":"10.1021/acs.iecr.9b06667","publication_identifier":{"issn":["0888-5885","1520-5045"]},"publication_status":"published","issue":"18","year":"2020","intvolume":"        59","page":"8551-8561","citation":{"bibtex":"@article{Gonchikzhapov_Kasper_2020, title={Decomposition Reactions of Fe(CO)<sub>5</sub>, Fe(C<sub>5</sub>H<sub>5</sub>)<sub>2</sub>, and TTIP as Precursors for the Spray-Flame Synthesis of Nanoparticles in Partial Spray Evaporation at Low Temperatures}, volume={59}, DOI={<a href=\"https://doi.org/10.1021/acs.iecr.9b06667\">10.1021/acs.iecr.9b06667</a>}, number={18}, journal={Industrial &#38;amp; Engineering Chemistry Research}, publisher={American Chemical Society (ACS)}, author={Gonchikzhapov, Munko and Kasper, Tina}, year={2020}, pages={8551–8561} }","mla":"Gonchikzhapov, Munko, and Tina Kasper. “Decomposition Reactions of Fe(CO)<sub>5</sub>, Fe(C<sub>5</sub>H<sub>5</sub>)<sub>2</sub>, and TTIP as Precursors for the Spray-Flame Synthesis of Nanoparticles in Partial Spray Evaporation at Low Temperatures.” <i>Industrial &#38;amp; Engineering Chemistry Research</i>, vol. 59, no. 18, American Chemical Society (ACS), 2020, pp. 8551–61, doi:<a href=\"https://doi.org/10.1021/acs.iecr.9b06667\">10.1021/acs.iecr.9b06667</a>.","short":"M. Gonchikzhapov, T. Kasper, Industrial &#38;amp; Engineering Chemistry Research 59 (2020) 8551–8561.","ama":"Gonchikzhapov M, Kasper T. Decomposition Reactions of Fe(CO)<sub>5</sub>, Fe(C<sub>5</sub>H<sub>5</sub>)<sub>2</sub>, and TTIP as Precursors for the Spray-Flame Synthesis of Nanoparticles in Partial Spray Evaporation at Low Temperatures. <i>Industrial &#38;amp; Engineering Chemistry Research</i>. 2020;59(18):8551-8561. doi:<a href=\"https://doi.org/10.1021/acs.iecr.9b06667\">10.1021/acs.iecr.9b06667</a>","apa":"Gonchikzhapov, M., &#38; Kasper, T. (2020). Decomposition Reactions of Fe(CO)<sub>5</sub>, Fe(C<sub>5</sub>H<sub>5</sub>)<sub>2</sub>, and TTIP as Precursors for the Spray-Flame Synthesis of Nanoparticles in Partial Spray Evaporation at Low Temperatures. <i>Industrial &#38;amp; Engineering Chemistry Research</i>, <i>59</i>(18), 8551–8561. <a href=\"https://doi.org/10.1021/acs.iecr.9b06667\">https://doi.org/10.1021/acs.iecr.9b06667</a>","chicago":"Gonchikzhapov, Munko, and Tina Kasper. “Decomposition Reactions of Fe(CO)<sub>5</sub>, Fe(C<sub>5</sub>H<sub>5</sub>)<sub>2</sub>, and TTIP as Precursors for the Spray-Flame Synthesis of Nanoparticles in Partial Spray Evaporation at Low Temperatures.” <i>Industrial &#38;amp; Engineering Chemistry Research</i> 59, no. 18 (2020): 8551–61. <a href=\"https://doi.org/10.1021/acs.iecr.9b06667\">https://doi.org/10.1021/acs.iecr.9b06667</a>.","ieee":"M. Gonchikzhapov and T. Kasper, “Decomposition Reactions of Fe(CO)<sub>5</sub>, Fe(C<sub>5</sub>H<sub>5</sub>)<sub>2</sub>, and TTIP as Precursors for the Spray-Flame Synthesis of Nanoparticles in Partial Spray Evaporation at Low Temperatures,” <i>Industrial &#38;amp; Engineering Chemistry Research</i>, vol. 59, no. 18, pp. 8551–8561, 2020, doi: <a href=\"https://doi.org/10.1021/acs.iecr.9b06667\">10.1021/acs.iecr.9b06667</a>."}},{"keyword":["Industrial and Manufacturing Engineering","General Chemical Engineering","Environmental Chemistry","General Chemistry"],"article_number":"125660","extern":"1","language":[{"iso":"eng"}],"_id":"46008","user_id":"100383","status":"public","publication":"Chemical Engineering Journal","type":"journal_article","title":"Enhanced electrocatalytic oxygen evolution by manipulation of electron transfer through cobalt-phosphorous bridging","doi":"10.1016/j.cej.2020.125660","date_updated":"2023-07-11T16:39:18Z","publisher":"Elsevier BV","volume":398,"author":[{"id":"100383","full_name":"Pan, Ying","last_name":"Pan","first_name":"Ying"},{"full_name":"Ren, Hangjuan","last_name":"Ren","first_name":"Hangjuan"},{"first_name":"Ruizhe","full_name":"Chen, Ruizhe","last_name":"Chen"},{"full_name":"Wu, Yanfang","last_name":"Wu","first_name":"Yanfang"},{"first_name":"Dewei","last_name":"Chu","full_name":"Chu, Dewei"}],"date_created":"2023-07-11T14:49:33Z","year":"2020","intvolume":"       398","citation":{"ieee":"Y. Pan, H. Ren, R. Chen, Y. Wu, and D. Chu, “Enhanced electrocatalytic oxygen evolution by manipulation of electron transfer through cobalt-phosphorous bridging,” <i>Chemical Engineering Journal</i>, vol. 398, Art. no. 125660, 2020, doi: <a href=\"https://doi.org/10.1016/j.cej.2020.125660\">10.1016/j.cej.2020.125660</a>.","chicago":"Pan, Ying, Hangjuan Ren, Ruizhe Chen, Yanfang Wu, and Dewei Chu. “Enhanced Electrocatalytic Oxygen Evolution by Manipulation of Electron Transfer through Cobalt-Phosphorous Bridging.” <i>Chemical Engineering Journal</i> 398 (2020). <a href=\"https://doi.org/10.1016/j.cej.2020.125660\">https://doi.org/10.1016/j.cej.2020.125660</a>.","ama":"Pan Y, Ren H, Chen R, Wu Y, Chu D. Enhanced electrocatalytic oxygen evolution by manipulation of electron transfer through cobalt-phosphorous bridging. <i>Chemical Engineering Journal</i>. 2020;398. doi:<a href=\"https://doi.org/10.1016/j.cej.2020.125660\">10.1016/j.cej.2020.125660</a>","apa":"Pan, Y., Ren, H., Chen, R., Wu, Y., &#38; Chu, D. (2020). Enhanced electrocatalytic oxygen evolution by manipulation of electron transfer through cobalt-phosphorous bridging. <i>Chemical Engineering Journal</i>, <i>398</i>, Article 125660. <a href=\"https://doi.org/10.1016/j.cej.2020.125660\">https://doi.org/10.1016/j.cej.2020.125660</a>","mla":"Pan, Ying, et al. “Enhanced Electrocatalytic Oxygen Evolution by Manipulation of Electron Transfer through Cobalt-Phosphorous Bridging.” <i>Chemical Engineering Journal</i>, vol. 398, 125660, Elsevier BV, 2020, doi:<a href=\"https://doi.org/10.1016/j.cej.2020.125660\">10.1016/j.cej.2020.125660</a>.","bibtex":"@article{Pan_Ren_Chen_Wu_Chu_2020, title={Enhanced electrocatalytic oxygen evolution by manipulation of electron transfer through cobalt-phosphorous bridging}, volume={398}, DOI={<a href=\"https://doi.org/10.1016/j.cej.2020.125660\">10.1016/j.cej.2020.125660</a>}, number={125660}, journal={Chemical Engineering Journal}, publisher={Elsevier BV}, author={Pan, Ying and Ren, Hangjuan and Chen, Ruizhe and Wu, Yanfang and Chu, Dewei}, year={2020} }","short":"Y. Pan, H. Ren, R. Chen, Y. Wu, D. Chu, Chemical Engineering Journal 398 (2020)."},"publication_identifier":{"issn":["1385-8947"]},"publication_status":"published"},{"year":"2019","page":"28-44","intvolume":"         6","citation":{"apa":"Stegehake, C., Riese, J., &#38; Grünewald, M. (2019). Modeling and Validating Fixed‐Bed Reactors: A State‐of‐the‐Art Review. <i>ChemBioEng Reviews</i>, <i>6</i>(2), 28–44. <a href=\"https://doi.org/10.1002/cben.201900002\">https://doi.org/10.1002/cben.201900002</a>","bibtex":"@article{Stegehake_Riese_Grünewald_2019, title={Modeling and Validating Fixed‐Bed Reactors: A State‐of‐the‐Art Review}, volume={6}, DOI={<a href=\"https://doi.org/10.1002/cben.201900002\">10.1002/cben.201900002</a>}, number={2}, journal={ChemBioEng Reviews}, publisher={Wiley}, author={Stegehake, Carolin and Riese, Julia and Grünewald, Marcus}, year={2019}, pages={28–44} }","mla":"Stegehake, Carolin, et al. “Modeling and Validating Fixed‐Bed Reactors: A State‐of‐the‐Art Review.” <i>ChemBioEng Reviews</i>, vol. 6, no. 2, Wiley, 2019, pp. 28–44, doi:<a href=\"https://doi.org/10.1002/cben.201900002\">10.1002/cben.201900002</a>.","short":"C. Stegehake, J. Riese, M. Grünewald, ChemBioEng Reviews 6 (2019) 28–44.","ama":"Stegehake C, Riese J, Grünewald M. Modeling and Validating Fixed‐Bed Reactors: A State‐of‐the‐Art Review. <i>ChemBioEng Reviews</i>. 2019;6(2):28-44. doi:<a href=\"https://doi.org/10.1002/cben.201900002\">10.1002/cben.201900002</a>","ieee":"C. Stegehake, J. Riese, and M. Grünewald, “Modeling and Validating Fixed‐Bed Reactors: A State‐of‐the‐Art Review,” <i>ChemBioEng Reviews</i>, vol. 6, no. 2, pp. 28–44, 2019, doi: <a href=\"https://doi.org/10.1002/cben.201900002\">10.1002/cben.201900002</a>.","chicago":"Stegehake, Carolin, Julia Riese, and Marcus Grünewald. “Modeling and Validating Fixed‐Bed Reactors: A State‐of‐the‐Art Review.” <i>ChemBioEng Reviews</i> 6, no. 2 (2019): 28–44. <a href=\"https://doi.org/10.1002/cben.201900002\">https://doi.org/10.1002/cben.201900002</a>."},"publication_identifier":{"issn":["2196-9744","2196-9744"]},"quality_controlled":"1","publication_status":"published","issue":"2","title":"Modeling and Validating Fixed‐Bed Reactors: A State‐of‐the‐Art Review","doi":"10.1002/cben.201900002","publisher":"Wiley","date_updated":"2024-03-08T11:32:59Z","volume":6,"author":[{"first_name":"Carolin","full_name":"Stegehake, Carolin","last_name":"Stegehake"},{"first_name":"Julia","orcid":"0000-0002-3053-0534","last_name":"Riese","id":"101499","full_name":"Riese, Julia"},{"full_name":"Grünewald, Marcus","last_name":"Grünewald","first_name":"Marcus"}],"date_created":"2023-10-04T14:18:58Z","abstract":[{"lang":"eng","text":"<jats:title>Abstract</jats:title><jats:p>Modeling of heat and mass transfer in fixed‐bed reactors for heterogeneously catalyzed gas phase reactions is possible using different methods. Homogeneous and heterogeneous continuum models as well as particle resolved modeling of fixed‐bed reactors show high potential for application. Considering those approaches, advantages and disadvantages as well as underlying assumptions and boundary conditions are discussed. Additionally, methods for experimental validation are presented and discussed focusing on the two‐dimensional homogeneous models.</jats:p>"}],"status":"public","publication":"ChemBioEng Reviews","type":"journal_article","keyword":["Industrial and Manufacturing Engineering","Filtration and Separation","Process Chemistry and Technology","Biochemistry","Chemical Engineering (miscellaneous)","Bioengineering"],"extern":"1","language":[{"iso":"eng"}],"_id":"47582","user_id":"101499"},{"user_id":"18949","project":[{"_id":"1","name":"SFB 901: SFB 901"},{"_id":"2","name":"SFB 901 - A: SFB 901 - Project Area A"},{"name":"SFB 901 - A4: SFB 901 - Subproject A4","_id":"8"}],"_id":"44898","language":[{"iso":"eng"}],"article_number":"119415","keyword":["Industrial and Manufacturing Engineering","Strategy and Management","General Environmental Science","Renewable Energy","Sustainability and the Environment"],"type":"journal_article","publication":"Journal of Cleaner Production","status":"public","date_created":"2023-05-16T15:56:34Z","author":[{"full_name":"Fanasch, Patrizia","last_name":"Fanasch","first_name":"Patrizia"},{"full_name":"Frick, Bernd","id":"16019","last_name":"Frick","first_name":"Bernd"}],"volume":249,"date_updated":"2023-05-16T15:57:32Z","publisher":"Elsevier BV","doi":"10.1016/j.jclepro.2019.119415","title":"The value of signals: Do self-declaration and certification generate price premiums for organic and biodynamic wines?","publication_status":"published","publication_identifier":{"issn":["0959-6526"]},"citation":{"apa":"Fanasch, P., &#38; Frick, B. (2019). The value of signals: Do self-declaration and certification generate price premiums for organic and biodynamic wines? <i>Journal of Cleaner Production</i>, <i>249</i>, Article 119415. <a href=\"https://doi.org/10.1016/j.jclepro.2019.119415\">https://doi.org/10.1016/j.jclepro.2019.119415</a>","mla":"Fanasch, Patrizia, and Bernd Frick. “The Value of Signals: Do Self-Declaration and Certification Generate Price Premiums for Organic and Biodynamic Wines?” <i>Journal of Cleaner Production</i>, vol. 249, 119415, Elsevier BV, 2019, doi:<a href=\"https://doi.org/10.1016/j.jclepro.2019.119415\">10.1016/j.jclepro.2019.119415</a>.","short":"P. Fanasch, B. Frick, Journal of Cleaner Production 249 (2019).","bibtex":"@article{Fanasch_Frick_2019, title={The value of signals: Do self-declaration and certification generate price premiums for organic and biodynamic wines?}, volume={249}, DOI={<a href=\"https://doi.org/10.1016/j.jclepro.2019.119415\">10.1016/j.jclepro.2019.119415</a>}, number={119415}, journal={Journal of Cleaner Production}, publisher={Elsevier BV}, author={Fanasch, Patrizia and Frick, Bernd}, year={2019} }","ama":"Fanasch P, Frick B. The value of signals: Do self-declaration and certification generate price premiums for organic and biodynamic wines? <i>Journal of Cleaner Production</i>. 2019;249. doi:<a href=\"https://doi.org/10.1016/j.jclepro.2019.119415\">10.1016/j.jclepro.2019.119415</a>","chicago":"Fanasch, Patrizia, and Bernd Frick. “The Value of Signals: Do Self-Declaration and Certification Generate Price Premiums for Organic and Biodynamic Wines?” <i>Journal of Cleaner Production</i> 249 (2019). <a href=\"https://doi.org/10.1016/j.jclepro.2019.119415\">https://doi.org/10.1016/j.jclepro.2019.119415</a>.","ieee":"P. Fanasch and B. Frick, “The value of signals: Do self-declaration and certification generate price premiums for organic and biodynamic wines?,” <i>Journal of Cleaner Production</i>, vol. 249, Art. no. 119415, 2019, doi: <a href=\"https://doi.org/10.1016/j.jclepro.2019.119415\">10.1016/j.jclepro.2019.119415</a>."},"intvolume":"       249","year":"2019"},{"status":"public","type":"journal_article","publication":"Journal of Cleaner Production","keyword":["Industrial and Manufacturing Engineering","Strategy and Management","General Environmental Science","Renewable Energy","Sustainability and the Environment","Building and Construction"],"language":[{"iso":"eng"}],"_id":"47914","user_id":"21810","department":[{"_id":"186"},{"_id":"815"}],"year":"2018","citation":{"ama":"Wang Z, Reimsbach D, Braam G. Political embeddedness and the diffusion of corporate social responsibility practices in China: A trade-off between financial and CSR performance? <i>Journal of Cleaner Production</i>. 2018;198:1185-1197. doi:<a href=\"https://doi.org/10.1016/j.jclepro.2018.07.116\">10.1016/j.jclepro.2018.07.116</a>","ieee":"Z. Wang, D. Reimsbach, and G. Braam, “Political embeddedness and the diffusion of corporate social responsibility practices in China: A trade-off between financial and CSR performance?,” <i>Journal of Cleaner Production</i>, vol. 198, pp. 1185–1197, 2018, doi: <a href=\"https://doi.org/10.1016/j.jclepro.2018.07.116\">10.1016/j.jclepro.2018.07.116</a>.","chicago":"Wang, Zhi, Daniel Reimsbach, and Geert Braam. “Political Embeddedness and the Diffusion of Corporate Social Responsibility Practices in China: A Trade-off between Financial and CSR Performance?” <i>Journal of Cleaner Production</i> 198 (2018): 1185–97. <a href=\"https://doi.org/10.1016/j.jclepro.2018.07.116\">https://doi.org/10.1016/j.jclepro.2018.07.116</a>.","mla":"Wang, Zhi, et al. “Political Embeddedness and the Diffusion of Corporate Social Responsibility Practices in China: A Trade-off between Financial and CSR Performance?” <i>Journal of Cleaner Production</i>, vol. 198, Elsevier BV, 2018, pp. 1185–97, doi:<a href=\"https://doi.org/10.1016/j.jclepro.2018.07.116\">10.1016/j.jclepro.2018.07.116</a>.","short":"Z. Wang, D. Reimsbach, G. Braam, Journal of Cleaner Production 198 (2018) 1185–1197.","bibtex":"@article{Wang_Reimsbach_Braam_2018, title={Political embeddedness and the diffusion of corporate social responsibility practices in China: A trade-off between financial and CSR performance?}, volume={198}, DOI={<a href=\"https://doi.org/10.1016/j.jclepro.2018.07.116\">10.1016/j.jclepro.2018.07.116</a>}, journal={Journal of Cleaner Production}, publisher={Elsevier BV}, author={Wang, Zhi and Reimsbach, Daniel and Braam, Geert}, year={2018}, pages={1185–1197} }","apa":"Wang, Z., Reimsbach, D., &#38; Braam, G. (2018). Political embeddedness and the diffusion of corporate social responsibility practices in China: A trade-off between financial and CSR performance? <i>Journal of Cleaner Production</i>, <i>198</i>, 1185–1197. <a href=\"https://doi.org/10.1016/j.jclepro.2018.07.116\">https://doi.org/10.1016/j.jclepro.2018.07.116</a>"},"page":"1185-1197","intvolume":"       198","publication_status":"published","publication_identifier":{"issn":["0959-6526"]},"title":"Political embeddedness and the diffusion of corporate social responsibility practices in China: A trade-off between financial and CSR performance?","doi":"10.1016/j.jclepro.2018.07.116","publisher":"Elsevier BV","date_updated":"2023-10-30T11:32:22Z","date_created":"2023-10-10T09:24:01Z","author":[{"first_name":"Zhi","full_name":"Wang, Zhi","last_name":"Wang"},{"first_name":"Daniel","full_name":"Reimsbach, Daniel","id":"100169","last_name":"Reimsbach"},{"first_name":"Geert","full_name":"Braam, Geert","last_name":"Braam"}],"volume":198}]