[{"keyword":["PBF-LB/M","Pipe structures","Strength assessment","Burst pressure test","Geometrical deviations"],"language":[{"iso":"eng"}],"publication":"International Journal of Pressure Vessels and Piping","abstract":[{"text":"The state of the art shows that PBF-LB/M offers great potential for pressure-loaded parts, with significant weight reductions and simultaneous optimization of flow resistance. This study is aimed at applying existing calculation methods for pressure-loaded parts to additively manufactured pipe structures, considering the two materials EN AC-43000 (3.2381, AlSi10Mg) and AISI 316L (1.4404, X2CrNiMo17-12-2). For this purpose, systematic tensile tests are carried out for both materials. In addition, a statistical evaluation is performed to determine the design-relevant strength characteristics with a survival probability Ps of 97.5 % for both materials in the as-built and heat-treated condition.\r\nPipe specimens are manufactured, half of which are heat treated, geometrically measured and then subjected to a burst pressure test to experimentally determine the failure-critical internal pressure. These results are compared with calculated burst pressures. The calculations are based on the application-relevant methods identified in this study, considering the strength values determined for the respective material condition. This comparison is used to assess the suitability of the calculation methods for additively manufactured pipe structures, based on the materials investigated.","lang":"eng"}],"publisher":"Elsevier BV","date_created":"2026-01-07T08:39:04Z","title":"Analytical and experimental determination of the failure-critical pressure of pipe structures manufactured by PBF-LB/M","quality_controlled":"1","year":"2026","_id":"63512","user_id":"97759","department":[{"_id":"146"},{"_id":"9"},{"_id":"624"},{"_id":"149"},{"_id":"321"}],"article_number":"105753","type":"journal_article","status":"public","date_updated":"2026-01-14T11:56:01Z","oa":"1","author":[{"full_name":"Koers, Thorsten","id":"38077","last_name":"Koers","first_name":"Thorsten"},{"first_name":"Balázs","last_name":"Magyar","full_name":"Magyar, Balázs","id":"97759"},{"first_name":"Christian","last_name":"Bödger","full_name":"Bödger, Christian","id":"93904"},{"first_name":"Thomas","id":"553","full_name":"Tröster, Thomas","last_name":"Tröster"}],"main_file_link":[{"open_access":"1","url":"https://doi.org/10.1016/j.ijpvp.2026.105753"}],"doi":"10.1016/j.ijpvp.2026.105753","publication_status":"published","publication_identifier":{"issn":["0308-0161"]},"citation":{"ieee":"T. Koers, B. Magyar, C. Bödger, and T. Tröster, “Analytical and experimental determination of the failure-critical pressure of pipe structures manufactured by PBF-LB/M,” <i>International Journal of Pressure Vessels and Piping</i>, Art. no. 105753, 2026, doi: <a href=\"https://doi.org/10.1016/j.ijpvp.2026.105753\">10.1016/j.ijpvp.2026.105753</a>.","chicago":"Koers, Thorsten, Balázs Magyar, Christian Bödger, and Thomas Tröster. “Analytical and Experimental Determination of the Failure-Critical Pressure of Pipe Structures Manufactured by PBF-LB/M.” <i>International Journal of Pressure Vessels and Piping</i>, 2026. <a href=\"https://doi.org/10.1016/j.ijpvp.2026.105753\">https://doi.org/10.1016/j.ijpvp.2026.105753</a>.","ama":"Koers T, Magyar B, Bödger C, Tröster T. Analytical and experimental determination of the failure-critical pressure of pipe structures manufactured by PBF-LB/M. <i>International Journal of Pressure Vessels and Piping</i>. Published online 2026. doi:<a href=\"https://doi.org/10.1016/j.ijpvp.2026.105753\">10.1016/j.ijpvp.2026.105753</a>","bibtex":"@article{Koers_Magyar_Bödger_Tröster_2026, title={Analytical and experimental determination of the failure-critical pressure of pipe structures manufactured by PBF-LB/M}, DOI={<a href=\"https://doi.org/10.1016/j.ijpvp.2026.105753\">10.1016/j.ijpvp.2026.105753</a>}, number={105753}, journal={International Journal of Pressure Vessels and Piping}, publisher={Elsevier BV}, author={Koers, Thorsten and Magyar, Balázs and Bödger, Christian and Tröster, Thomas}, year={2026} }","mla":"Koers, Thorsten, et al. “Analytical and Experimental Determination of the Failure-Critical Pressure of Pipe Structures Manufactured by PBF-LB/M.” <i>International Journal of Pressure Vessels and Piping</i>, 105753, Elsevier BV, 2026, doi:<a href=\"https://doi.org/10.1016/j.ijpvp.2026.105753\">10.1016/j.ijpvp.2026.105753</a>.","short":"T. Koers, B. Magyar, C. Bödger, T. Tröster, International Journal of Pressure Vessels and Piping (2026).","apa":"Koers, T., Magyar, B., Bödger, C., &#38; Tröster, T. (2026). Analytical and experimental determination of the failure-critical pressure of pipe structures manufactured by PBF-LB/M. <i>International Journal of Pressure Vessels and Piping</i>, Article 105753. <a href=\"https://doi.org/10.1016/j.ijpvp.2026.105753\">https://doi.org/10.1016/j.ijpvp.2026.105753</a>"}},{"main_file_link":[{"url":"https://www.mdpi.com/1996-1944/14/23/7190/htm"}],"doi":"https://doi.org/10.3390/ma14237190","title":"Requirements for Processing High-Strength AlZnMgCu Alloys with PBF-LB/M to Achieve Crack-Free and Dense Parts","date_created":"2021-11-29T08:23:43Z","author":[{"first_name":"Steffen","full_name":"Heiland, Steffen","id":"77250","last_name":"Heiland"},{"first_name":"Benjamin","full_name":"Milkereit, Benjamin","last_name":"Milkereit"},{"full_name":"Hoyer, Kay-Peter","last_name":"Hoyer","first_name":"Kay-Peter"},{"full_name":"Zhuravlev, Evgeny","last_name":"Zhuravlev","first_name":"Evgeny"},{"full_name":"Keßler, Olaf","last_name":"Keßler","first_name":"Olaf"},{"first_name":"Mirko","full_name":"Schaper, Mirko","last_name":"Schaper"}],"date_updated":"2022-01-06T06:57:50Z","citation":{"mla":"Heiland, Steffen, et al. “Requirements for Processing High-Strength AlZnMgCu Alloys with PBF-LB/M to Achieve Crack-Free and Dense Parts.” <i>Materials</i>, 2021, doi:<a href=\"https://doi.org/10.3390/ma14237190\">https://doi.org/10.3390/ma14237190</a>.","bibtex":"@article{Heiland_Milkereit_Hoyer_Zhuravlev_Keßler_Schaper_2021, title={Requirements for Processing High-Strength AlZnMgCu Alloys with PBF-LB/M to Achieve Crack-Free and Dense Parts}, DOI={<a href=\"https://doi.org/10.3390/ma14237190\">https://doi.org/10.3390/ma14237190</a>}, journal={Materials}, author={Heiland, Steffen and Milkereit, Benjamin and Hoyer, Kay-Peter and Zhuravlev, Evgeny and Keßler, Olaf and Schaper, Mirko}, year={2021} }","short":"S. Heiland, B. Milkereit, K.-P. Hoyer, E. Zhuravlev, O. Keßler, M. Schaper, Materials (2021).","apa":"Heiland, S., Milkereit, B., Hoyer, K.-P., Zhuravlev, E., Keßler, O., &#38; Schaper, M. (2021). Requirements for Processing High-Strength AlZnMgCu Alloys with PBF-LB/M to Achieve Crack-Free and Dense Parts. <i>Materials</i>. <a href=\"https://doi.org/10.3390/ma14237190\">https://doi.org/10.3390/ma14237190</a>","ama":"Heiland S, Milkereit B, Hoyer K-P, Zhuravlev E, Keßler O, Schaper M. Requirements for Processing High-Strength AlZnMgCu Alloys with PBF-LB/M to Achieve Crack-Free and Dense Parts. <i>Materials</i>. Published online 2021. doi:<a href=\"https://doi.org/10.3390/ma14237190\">https://doi.org/10.3390/ma14237190</a>","ieee":"S. Heiland, B. Milkereit, K.-P. Hoyer, E. Zhuravlev, O. Keßler, and M. Schaper, “Requirements for Processing High-Strength AlZnMgCu Alloys with PBF-LB/M to Achieve Crack-Free and Dense Parts,” <i>Materials</i>, 2021, doi: <a href=\"https://doi.org/10.3390/ma14237190\">https://doi.org/10.3390/ma14237190</a>.","chicago":"Heiland, Steffen, Benjamin Milkereit, Kay-Peter Hoyer, Evgeny Zhuravlev, Olaf Keßler, and Mirko Schaper. “Requirements for Processing High-Strength AlZnMgCu Alloys with PBF-LB/M to Achieve Crack-Free and Dense Parts.” <i>Materials</i>, 2021. <a href=\"https://doi.org/10.3390/ma14237190\">https://doi.org/10.3390/ma14237190</a>."},"year":"2021","has_accepted_license":"1","language":[{"iso":"eng"}],"file_date_updated":"2021-11-29T08:19:19Z","ddc":["620"],"keyword":["grain refinement","crack reduction","laser beam melting","aluminum alloy","titanium carbide","nanoparticle","PBF-LB/M"],"user_id":"77250","department":[{"_id":"9"},{"_id":"158"},{"_id":"219"}],"_id":"28017","file":[{"content_type":"application/pdf","success":1,"relation":"main_file","date_updated":"2021-11-29T08:19:19Z","creator":"heilands","date_created":"2021-11-29T08:19:19Z","file_size":2202343,"file_name":"2021_Heiland_MDPI Materials_Requirements for Processing High-Strength AlZnMgCu Alloys with PBF-LBM to Achieve Crack-Free and Dense Parts_print.pdf","access_level":"closed","file_id":"28018"}],"status":"public","abstract":[{"lang":"eng","text":"Processing aluminum alloys employing powder bed fusion of metals (PBF-LB/M) is becoming more attractive for the industry, especially if lightweight applications are needed. Unfortunately, high-strength aluminum alloys such as AA7075 are prone to hot cracking during PBF-LB/M, as well as welding. Both a large solidification range promoted by the alloying elements zinc and copper and a high thermal gradient accompanied with the manufacturing process conditions lead to or favor hot cracking. In the present study, a simple method for modifying the powder surface with titanium carbide nanoparticles (NPs) as a nucleating agent is aimed. The effect on the microstructure with different amounts of the nucleating agent is shown. For the aluminum alloy 7075 with 2.5 ma% titanium carbide nanoparticles, manufactured via PBF-LB/M, crack-free samples with a refined microstructure having no discernible melt pool boundaries and columnar grains are observed. After using a two-step ageing heat treatment, ultimate tensile strengths up to 465 MPa and an 8.9% elongation at break are achieved. Furthermore, it is demonstrated that not all nanoparticles used remain in the melt pool during PBF-LB/M."}],"type":"journal_article","publication":"Materials"},{"year":"2021","citation":{"ama":"Sieger A. <i>Mikrostrukturausprägung additiv gefertigter Gitterstrukturen</i>. Vol 23.; 2021.","ieee":"A. Sieger, <i>Mikrostrukturausprägung additiv gefertigter Gitterstrukturen</i>, vol. 23. 2021.","chicago":"Sieger, Alexander. <i>Mikrostrukturausprägung additiv gefertigter Gitterstrukturen</i>. Vol. 23. Forschungsberichte des Direct Manufacturing Research Centers, 2021.","bibtex":"@book{Sieger_2021, series={Forschungsberichte des Direct Manufacturing Research Centers}, title={Mikrostrukturausprägung additiv gefertigter Gitterstrukturen}, volume={23}, author={Sieger, Alexander}, year={2021}, collection={Forschungsberichte des Direct Manufacturing Research Centers} }","short":"A. Sieger, Mikrostrukturausprägung additiv gefertigter Gitterstrukturen, 2021.","mla":"Sieger, Alexander. <i>Mikrostrukturausprägung additiv gefertigter Gitterstrukturen</i>. 2021.","apa":"Sieger, A. (2021). <i>Mikrostrukturausprägung additiv gefertigter Gitterstrukturen</i> (Vol. 23)."},"page":"136","intvolume":"        23","publication_status":"published","publication_identifier":{"isbn":["\t978-3-8440-7924-1"]},"title":"Mikrostrukturausprägung additiv gefertigter Gitterstrukturen","date_updated":"2022-01-06T06:57:30Z","date_created":"2021-10-26T13:35:56Z","author":[{"full_name":"Sieger, Alexander","last_name":"Sieger","first_name":"Alexander"}],"volume":23,"abstract":[{"text":"Mit Hilfe der additiven Fertigung, insbesondere dem pulverbettbasierten selektiven Laserstrahl-schmelzen (LBM), können hochkomplexe Strukturen endkonturnah hergestellt werden. Die große Designfreiheit ermöglicht, zelluläre Leichtbaustrukturen zu erzeugen, deren mikrostrukturellen und mechanischen Eigenschaften direkt vom generativen Fertigungsverfahren abhängen. Insbesondere im Bereich des Leichtbaus bieten zelluläre Strukturen neue Ansätze zur Verminderung des Energieverbrauchs. Um dieses Potential vollständig ausschöpfen zu können, müssen die Effekte, die zum Versagen der Bauteile mit integrierten Gitterstrukturen führen, quantitativ beschrieben und verstanden werden. Dies ist Voraussetzung für eine sichere Auslegung. Dazu werden im Rahmen der vorliegenden Arbeit die charakteristischen Eigenschaften dieser Strukturen sowie die Einflussgrößen im Aufbauprozess näher beleuchtet.\r\nIm Rahmen dieser Dissertation werden numerische und experimentelle Untersuchungen von zwei unterschiedlichen Gitterstrukturtypen aus den Werkstoffen 316L und TiAl6V4 vorgestellt. Beide Werkstoffe werden unter monotoner, einachsiger Belastung getestet. Die parallel dazu durchgeführte digitale Bildkorrelation (DIC) ermöglicht gleichzeitig die detaillierte Analyse der lokalen Dehnungsverteilung während der Verformung. Mikrostrukturelle Eigenschaften und die resultierenden Gittercharakteristika werden mit Hilfe von rasterelektronenmikroskopischen Analysemethoden untersucht. Zudem erfolgt die Entwicklung eines Finite-Elemente- Modells, mit der Anforderung eines möglichst geringen Rechenaufwandes. Ein abschließender Vergleich der realen Dehnungsverteilung mit der FE- Analyse verifiziert das Modell.","lang":"ger"}],"status":"public","type":"dissertation","keyword":["Additive Fertigung","TiAl6V4","316L","Gitterstrukturen","L-PBF"],"language":[{"iso":"ger"}],"extern":"1","_id":"26900","user_id":"77250","series_title":"Forschungsberichte des Direct Manufacturing Research Centers","department":[{"_id":"9"},{"_id":"158"},{"_id":"219"}]},{"type":"journal_article","publication":"Bernoulli","abstract":[{"lang":"eng","text":"We derive a criterium for the almost sure finiteness of perpetual integrals of L ́evy\r\nprocesses for a class of real functions including all continuous functions and for general one-\r\ndimensional L ́evy processes that drifts to plus infinity. This generalizes previous work of D ̈oring\r\nand Kyprianou, who considered L ́evy processes having a local time, leaving the general case as an\r\nopen problem. It turns out, that the criterium in the general situation simplifies significantly in\r\nthe situation, where the process has a local time, but we also demonstrate that in general our cri-\r\nterium can not be reduced. This answers an open problem posed in D ̈oring, L. and Kyprianou, A.\r\n(2015)."}],"status":"public","_id":"33282","user_id":"85821","department":[{"_id":"96"}],"keyword":["L ́evy processes","Perpetual integrals","Potential measures"],"language":[{"iso":"eng"}],"publication_status":"published","issue":"2","year":"2020","citation":{"apa":"Kolb, M., &#38; Savov, M. (2020). A Characterization of the Finiteness of Perpetual Integrals of Levy Processes. <i>Bernoulli</i>, <i>26</i>(2), 1453–1472. <a href=\"https://doi.org/10.48550/arXiv.1903.03792\">https://doi.org/10.48550/arXiv.1903.03792</a>","short":"M. Kolb, M. Savov, Bernoulli 26 (2020) 1453–1472.","bibtex":"@article{Kolb_Savov_2020, title={A Characterization of the Finiteness of Perpetual Integrals of Levy Processes}, volume={26}, DOI={<a href=\"https://doi.org/10.48550/arXiv.1903.03792\">https://doi.org/10.48550/arXiv.1903.03792</a>}, number={2}, journal={Bernoulli}, publisher={Bernoulli Society for Mathematical Statistics and Probability}, author={Kolb, Martin and Savov, Mladen}, year={2020}, pages={1453–1472} }","mla":"Kolb, Martin, and Mladen Savov. “A Characterization of the Finiteness of Perpetual Integrals of Levy Processes.” <i>Bernoulli</i>, vol. 26, no. 2, Bernoulli Society for Mathematical Statistics and Probability, 2020, pp. 1453–72, doi:<a href=\"https://doi.org/10.48550/arXiv.1903.03792\">https://doi.org/10.48550/arXiv.1903.03792</a>.","ama":"Kolb M, Savov M. A Characterization of the Finiteness of Perpetual Integrals of Levy Processes. <i>Bernoulli</i>. 2020;26(2):1453-1472. doi:<a href=\"https://doi.org/10.48550/arXiv.1903.03792\">https://doi.org/10.48550/arXiv.1903.03792</a>","ieee":"M. Kolb and M. Savov, “A Characterization of the Finiteness of Perpetual Integrals of Levy Processes,” <i>Bernoulli</i>, vol. 26, no. 2, pp. 1453–1472, 2020, doi: <a href=\"https://doi.org/10.48550/arXiv.1903.03792\">https://doi.org/10.48550/arXiv.1903.03792</a>.","chicago":"Kolb, Martin, and Mladen Savov. “A Characterization of the Finiteness of Perpetual Integrals of Levy Processes.” <i>Bernoulli</i> 26, no. 2 (2020): 1453–72. <a href=\"https://doi.org/10.48550/arXiv.1903.03792\">https://doi.org/10.48550/arXiv.1903.03792</a>."},"intvolume":"        26","page":"1453-1472","date_updated":"2022-09-08T06:48:40Z","publisher":"Bernoulli Society for Mathematical Statistics and Probability","date_created":"2022-09-08T06:36:37Z","author":[{"first_name":"Martin","id":"48880","full_name":"Kolb, Martin","last_name":"Kolb"},{"first_name":"Mladen","last_name":"Savov","full_name":"Savov, Mladen"}],"volume":26,"title":"A Characterization of the Finiteness of Perpetual Integrals of Levy Processes","doi":"https://doi.org/10.48550/arXiv.1903.03792"}]