---
_id: '12918'
abstract:
- lang: eng
text: 'The test for small delay faults is of major importance for predicting potential
early life failures or wearout problems. Typically, a faster-than-at-speed test
(FAST) with sev¬eral different frequencies is used to detect also hidden small
delays, which can only be propagated over short paths. But then the outputs at
the end of long paths may no longer reach their stable values at the nominal observation
time and must be considered as unknown (X-values). Thus, test response compaction
for FAST must be extremely flexible to cope with high X-rates, which also vary
with the test frequencies. Stochastic compaction introduced by Mitra et al. is
controlled by weighted pseudo-random signals allowing for easy adaptation to varying
conditions. As demonstrated in previous work, the pseudo-random control can be
optimized for high fault efficiency or X-reduction, but a given target in fault
efficiency cannot be guaranteed. To close this gap, a hybrid space compactor is
introduced in this paper. It is based on the observation that many faults are
lost in the compaction of relatively few critical test patterns. For these critical
patterns a deterministic compaction phase is added to the test, where the existing
compactor structure is re-used, but controlled by specifically determined control
vectors. '
author:
- first_name: Mohammad Urf
full_name: Maaz, Mohammad Urf
id: '49274'
last_name: Maaz
- first_name: Alexander
full_name: Sprenger, Alexander
id: '22707'
last_name: Sprenger
- first_name: Sybille
full_name: Hellebrand, Sybille
id: '209'
last_name: Hellebrand
orcid: 0000-0002-3717-3939
citation:
ama: 'Maaz MU, Sprenger A, Hellebrand S. A Hybrid Space Compactor for Adaptive X-Handling.
In: 50th IEEE International Test Conference (ITC). IEEE; 2019:1-8.'
apa: Maaz, M. U., Sprenger, A., & Hellebrand, S. (2019). A Hybrid Space Compactor
for Adaptive X-Handling. 50th IEEE International Test Conference (ITC),
1–8.
bibtex: '@inproceedings{Maaz_Sprenger_Hellebrand_2019, place={Washington, DC, USA},
title={A Hybrid Space Compactor for Adaptive X-Handling}, booktitle={50th IEEE
International Test Conference (ITC)}, publisher={IEEE}, author={Maaz, Mohammad
Urf and Sprenger, Alexander and Hellebrand, Sybille}, year={2019}, pages={1–8}
}'
chicago: 'Maaz, Mohammad Urf, Alexander Sprenger, and Sybille Hellebrand. “A Hybrid
Space Compactor for Adaptive X-Handling.” In 50th IEEE International Test Conference
(ITC), 1–8. Washington, DC, USA: IEEE, 2019.'
ieee: M. U. Maaz, A. Sprenger, and S. Hellebrand, “A Hybrid Space Compactor for
Adaptive X-Handling,” in 50th IEEE International Test Conference (ITC),
Washington, DC, USA, 2019, pp. 1–8.
mla: Maaz, Mohammad Urf, et al. “A Hybrid Space Compactor for Adaptive X-Handling.”
50th IEEE International Test Conference (ITC), IEEE, 2019, pp. 1–8.
short: 'M.U. Maaz, A. Sprenger, S. Hellebrand, in: 50th IEEE International Test
Conference (ITC), IEEE, Washington, DC, USA, 2019, pp. 1–8.'
conference:
end_date: 2019-11-14
location: Washington, DC, USA
name: 50th IEEE International Test Conference (ITC)
start_date: 2019-11-12
date_created: 2019-08-14T06:59:04Z
date_updated: 2022-05-11T17:09:35Z
department:
- _id: '48'
keyword:
- Faster-than-at-speed test
- BIST
- DFT
- Test response compaction
- Stochastic compactor
- X-handling
language:
- iso: eng
page: 1-8
place: Washington, DC, USA
publication: 50th IEEE International Test Conference (ITC)
publication_status: published
publisher: IEEE
quality_controlled: '1'
status: public
title: A Hybrid Space Compactor for Adaptive X-Handling
type: conference
user_id: '209'
year: '2019'
...
---
_id: '47582'
abstract:
- lang: eng
text: AbstractModeling of heat and mass transfer
in fixed‐bed reactors for heterogeneously catalyzed gas phase reactions is possible
using different methods. Homogeneous and heterogeneous continuum models as well
as particle resolved modeling of fixed‐bed reactors show high potential for application.
Considering those approaches, advantages and disadvantages as well as underlying
assumptions and boundary conditions are discussed. Additionally, methods for experimental
validation are presented and discussed focusing on the two‐dimensional homogeneous
models.
author:
- first_name: Carolin
full_name: Stegehake, Carolin
last_name: Stegehake
- first_name: Julia
full_name: Riese, Julia
id: '101499'
last_name: Riese
orcid: 0000-0002-3053-0534
- first_name: Marcus
full_name: Grünewald, Marcus
last_name: Grünewald
citation:
ama: 'Stegehake C, Riese J, Grünewald M. Modeling and Validating Fixed‐Bed Reactors:
A State‐of‐the‐Art Review. ChemBioEng Reviews. 2019;6(2):28-44. doi:10.1002/cben.201900002'
apa: 'Stegehake, C., Riese, J., & Grünewald, M. (2019). Modeling and Validating
Fixed‐Bed Reactors: A State‐of‐the‐Art Review. ChemBioEng Reviews, 6(2),
28–44. https://doi.org/10.1002/cben.201900002'
bibtex: '@article{Stegehake_Riese_Grünewald_2019, title={Modeling and Validating
Fixed‐Bed Reactors: A State‐of‐the‐Art Review}, volume={6}, DOI={10.1002/cben.201900002},
number={2}, journal={ChemBioEng Reviews}, publisher={Wiley}, author={Stegehake,
Carolin and Riese, Julia and Grünewald, Marcus}, year={2019}, pages={28–44} }'
chicago: 'Stegehake, Carolin, Julia Riese, and Marcus Grünewald. “Modeling and Validating
Fixed‐Bed Reactors: A State‐of‐the‐Art Review.” ChemBioEng Reviews 6, no.
2 (2019): 28–44. https://doi.org/10.1002/cben.201900002.'
ieee: 'C. Stegehake, J. Riese, and M. Grünewald, “Modeling and Validating Fixed‐Bed
Reactors: A State‐of‐the‐Art Review,” ChemBioEng Reviews, vol. 6, no. 2,
pp. 28–44, 2019, doi: 10.1002/cben.201900002.'
mla: 'Stegehake, Carolin, et al. “Modeling and Validating Fixed‐Bed Reactors: A
State‐of‐the‐Art Review.” ChemBioEng Reviews, vol. 6, no. 2, Wiley, 2019,
pp. 28–44, doi:10.1002/cben.201900002.'
short: C. Stegehake, J. Riese, M. Grünewald, ChemBioEng Reviews 6 (2019) 28–44.
date_created: 2023-10-04T14:18:58Z
date_updated: 2024-03-08T11:32:59Z
doi: 10.1002/cben.201900002
extern: '1'
intvolume: ' 6'
issue: '2'
keyword:
- Industrial and Manufacturing Engineering
- Filtration and Separation
- Process Chemistry and Technology
- Biochemistry
- Chemical Engineering (miscellaneous)
- Bioengineering
language:
- iso: eng
page: 28-44
publication: ChemBioEng Reviews
publication_identifier:
issn:
- 2196-9744
- 2196-9744
publication_status: published
publisher: Wiley
quality_controlled: '1'
status: public
title: 'Modeling and Validating Fixed‐Bed Reactors: A State‐of‐the‐Art Review'
type: journal_article
user_id: '101499'
volume: 6
year: '2019'
...
---
_id: '44898'
article_number: '119415'
author:
- first_name: Patrizia
full_name: Fanasch, Patrizia
last_name: Fanasch
- first_name: Bernd
full_name: Frick, Bernd
id: '16019'
last_name: Frick
citation:
ama: 'Fanasch P, Frick B. The value of signals: Do self-declaration and certification
generate price premiums for organic and biodynamic wines? Journal of Cleaner
Production. 2019;249. doi:10.1016/j.jclepro.2019.119415'
apa: 'Fanasch, P., & Frick, B. (2019). The value of signals: Do self-declaration
and certification generate price premiums for organic and biodynamic wines? Journal
of Cleaner Production, 249, Article 119415. https://doi.org/10.1016/j.jclepro.2019.119415'
bibtex: '@article{Fanasch_Frick_2019, title={The value of signals: Do self-declaration
and certification generate price premiums for organic and biodynamic wines?},
volume={249}, DOI={10.1016/j.jclepro.2019.119415},
number={119415}, journal={Journal of Cleaner Production}, publisher={Elsevier
BV}, author={Fanasch, Patrizia and Frick, Bernd}, year={2019} }'
chicago: 'Fanasch, Patrizia, and Bernd Frick. “The Value of Signals: Do Self-Declaration
and Certification Generate Price Premiums for Organic and Biodynamic Wines?” Journal
of Cleaner Production 249 (2019). https://doi.org/10.1016/j.jclepro.2019.119415.'
ieee: 'P. Fanasch and B. Frick, “The value of signals: Do self-declaration and certification
generate price premiums for organic and biodynamic wines?,” Journal of Cleaner
Production, vol. 249, Art. no. 119415, 2019, doi: 10.1016/j.jclepro.2019.119415.'
mla: 'Fanasch, Patrizia, and Bernd Frick. “The Value of Signals: Do Self-Declaration
and Certification Generate Price Premiums for Organic and Biodynamic Wines?” Journal
of Cleaner Production, vol. 249, 119415, Elsevier BV, 2019, doi:10.1016/j.jclepro.2019.119415.'
short: P. Fanasch, B. Frick, Journal of Cleaner Production 249 (2019).
date_created: 2023-05-16T15:56:34Z
date_updated: 2023-05-16T15:57:32Z
doi: 10.1016/j.jclepro.2019.119415
intvolume: ' 249'
keyword:
- Industrial and Manufacturing Engineering
- Strategy and Management
- General Environmental Science
- Renewable Energy
- Sustainability and the Environment
language:
- iso: eng
project:
- _id: '1'
name: 'SFB 901: SFB 901'
- _id: '2'
name: 'SFB 901 - A: SFB 901 - Project Area A'
- _id: '8'
name: 'SFB 901 - A4: SFB 901 - Subproject A4'
publication: Journal of Cleaner Production
publication_identifier:
issn:
- 0959-6526
publication_status: published
publisher: Elsevier BV
status: public
title: 'The value of signals: Do self-declaration and certification generate price
premiums for organic and biodynamic wines?'
type: journal_article
user_id: '18949'
volume: 249
year: '2019'
...
---
_id: '47914'
author:
- first_name: Zhi
full_name: Wang, Zhi
last_name: Wang
- first_name: Daniel
full_name: Reimsbach, Daniel
id: '100169'
last_name: Reimsbach
- first_name: Geert
full_name: Braam, Geert
last_name: Braam
citation:
ama: 'Wang Z, Reimsbach D, Braam G. Political embeddedness and the diffusion of
corporate social responsibility practices in China: A trade-off between financial
and CSR performance? Journal of Cleaner Production. 2018;198:1185-1197.
doi:10.1016/j.jclepro.2018.07.116'
apa: 'Wang, Z., Reimsbach, D., & Braam, G. (2018). Political embeddedness and
the diffusion of corporate social responsibility practices in China: A trade-off
between financial and CSR performance? Journal of Cleaner Production, 198,
1185–1197. https://doi.org/10.1016/j.jclepro.2018.07.116'
bibtex: '@article{Wang_Reimsbach_Braam_2018, title={Political embeddedness and the
diffusion of corporate social responsibility practices in China: A trade-off between
financial and CSR performance?}, volume={198}, DOI={10.1016/j.jclepro.2018.07.116},
journal={Journal of Cleaner Production}, publisher={Elsevier BV}, author={Wang,
Zhi and Reimsbach, Daniel and Braam, Geert}, year={2018}, pages={1185–1197} }'
chicago: 'Wang, Zhi, Daniel Reimsbach, and Geert Braam. “Political Embeddedness
and the Diffusion of Corporate Social Responsibility Practices in China: A Trade-off
between Financial and CSR Performance?” Journal of Cleaner Production 198
(2018): 1185–97. https://doi.org/10.1016/j.jclepro.2018.07.116.'
ieee: 'Z. Wang, D. Reimsbach, and G. Braam, “Political embeddedness and the diffusion
of corporate social responsibility practices in China: A trade-off between financial
and CSR performance?,” Journal of Cleaner Production, vol. 198, pp. 1185–1197,
2018, doi: 10.1016/j.jclepro.2018.07.116.'
mla: 'Wang, Zhi, et al. “Political Embeddedness and the Diffusion of Corporate Social
Responsibility Practices in China: A Trade-off between Financial and CSR Performance?”
Journal of Cleaner Production, vol. 198, Elsevier BV, 2018, pp. 1185–97,
doi:10.1016/j.jclepro.2018.07.116.'
short: Z. Wang, D. Reimsbach, G. Braam, Journal of Cleaner Production 198 (2018)
1185–1197.
date_created: 2023-10-10T09:24:01Z
date_updated: 2023-10-30T11:32:22Z
department:
- _id: '186'
- _id: '815'
doi: 10.1016/j.jclepro.2018.07.116
intvolume: ' 198'
keyword:
- Industrial and Manufacturing Engineering
- Strategy and Management
- General Environmental Science
- Renewable Energy
- Sustainability and the Environment
- Building and Construction
language:
- iso: eng
page: 1185-1197
publication: Journal of Cleaner Production
publication_identifier:
issn:
- 0959-6526
publication_status: published
publisher: Elsevier BV
status: public
title: 'Political embeddedness and the diffusion of corporate social responsibility
practices in China: A trade-off between financial and CSR performance?'
type: journal_article
user_id: '21810'
volume: 198
year: '2018'
...
---
_id: '47583'
abstract:
- lang: eng
text: AbstractEs stehen vielfältige Methoden zur
Beschreibung der Wärme‐ und Stofftransportvorgänge in Festbettreaktoren für die
Durchführung von heterogen katalysierten Gasphasenreaktionen zur Verfügung. Neben
den homogenen und heterogenen Kontinuumsmodellen kann auch der partikelaufgelösten
Modellierung ein hohes Anwendungspotenzial zugewiesen werden. Für die Methoden
werden die Vor‐ und Nachteile sowie Annahmen und Randbedingungen dargestellt und
diskutiert. Zusätzlich werden die Möglichkeiten zur experimentellen Validierung
diskutiert, wobei der Fokus dabei auf den besonders verbreiteten zweidimensionalen,
homogenen Kontinuumsmodellen liegt.
author:
- first_name: Carolin
full_name: Stegehake, Carolin
last_name: Stegehake
- first_name: Julia
full_name: Riese, Julia
id: '101499'
last_name: Riese
orcid: 0000-0002-3053-0534
- first_name: Marcus
full_name: Grünewald, Marcus
last_name: Grünewald
citation:
ama: 'Stegehake C, Riese J, Grünewald M. Modeling and Validating Fixed‐Bed Reactors:
A State‐of‐the‐Art Review. Chemie Ingenieur Technik. 2018;90(11):1739-1758.
doi:10.1002/cite.201800130'
apa: 'Stegehake, C., Riese, J., & Grünewald, M. (2018). Modeling and Validating
Fixed‐Bed Reactors: A State‐of‐the‐Art Review. Chemie Ingenieur Technik,
90(11), 1739–1758. https://doi.org/10.1002/cite.201800130'
bibtex: '@article{Stegehake_Riese_Grünewald_2018, title={Modeling and Validating
Fixed‐Bed Reactors: A State‐of‐the‐Art Review}, volume={90}, DOI={10.1002/cite.201800130},
number={11}, journal={Chemie Ingenieur Technik}, publisher={Wiley}, author={Stegehake,
Carolin and Riese, Julia and Grünewald, Marcus}, year={2018}, pages={1739–1758}
}'
chicago: 'Stegehake, Carolin, Julia Riese, and Marcus Grünewald. “Modeling and Validating
Fixed‐Bed Reactors: A State‐of‐the‐Art Review.” Chemie Ingenieur Technik
90, no. 11 (2018): 1739–58. https://doi.org/10.1002/cite.201800130.'
ieee: 'C. Stegehake, J. Riese, and M. Grünewald, “Modeling and Validating Fixed‐Bed
Reactors: A State‐of‐the‐Art Review,” Chemie Ingenieur Technik, vol. 90,
no. 11, pp. 1739–1758, 2018, doi: 10.1002/cite.201800130.'
mla: 'Stegehake, Carolin, et al. “Modeling and Validating Fixed‐Bed Reactors: A
State‐of‐the‐Art Review.” Chemie Ingenieur Technik, vol. 90, no. 11, Wiley,
2018, pp. 1739–58, doi:10.1002/cite.201800130.'
short: C. Stegehake, J. Riese, M. Grünewald, Chemie Ingenieur Technik 90 (2018)
1739–1758.
date_created: 2023-10-04T14:19:08Z
date_updated: 2024-03-08T11:32:50Z
doi: 10.1002/cite.201800130
extern: '1'
intvolume: ' 90'
issue: '11'
keyword:
- Industrial and Manufacturing Engineering
- General Chemical Engineering
- General Chemistry
language:
- iso: eng
page: 1739-1758
publication: Chemie Ingenieur Technik
publication_identifier:
issn:
- 0009-286X
- 1522-2640
publication_status: published
publisher: Wiley
quality_controlled: '1'
status: public
title: 'Modeling and Validating Fixed‐Bed Reactors: A State‐of‐the‐Art Review'
type: journal_article
user_id: '101499'
volume: 90
year: '2018'
...
---
_id: '41525'
author:
- first_name: Florian
full_name: Hengsbach, Florian
id: '14073'
last_name: Hengsbach
- first_name: Peter
full_name: Koppa, Peter
last_name: Koppa
- first_name: Martin Joachim
full_name: Holzweissig, Martin Joachim
last_name: Holzweissig
- first_name: Mehmet Esat
full_name: Aydinöz, Mehmet Esat
last_name: Aydinöz
- first_name: Alexander
full_name: Taube, Alexander
last_name: Taube
- first_name: Kay-Peter
full_name: Hoyer, Kay-Peter
id: '48411'
last_name: Hoyer
- first_name: Oleksiy
full_name: Starykov, Oleksiy
last_name: Starykov
- first_name: Babette
full_name: Tonn, Babette
last_name: Tonn
- first_name: Thomas
full_name: Niendorf, Thomas
last_name: Niendorf
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
citation:
ama: 'Hengsbach F, Koppa P, Holzweissig MJ, et al. Inline additively manufactured
functionally graded multi-materials: microstructural and mechanical characterization
of 316L parts with H13 layers. Progress in Additive Manufacturing. 2018;3(4):221-231.
doi:10.1007/s40964-018-0044-4'
apa: 'Hengsbach, F., Koppa, P., Holzweissig, M. J., Aydinöz, M. E., Taube, A., Hoyer,
K.-P., Starykov, O., Tonn, B., Niendorf, T., Tröster, T., & Schaper, M. (2018).
Inline additively manufactured functionally graded multi-materials: microstructural
and mechanical characterization of 316L parts with H13 layers. Progress in
Additive Manufacturing, 3(4), 221–231. https://doi.org/10.1007/s40964-018-0044-4'
bibtex: '@article{Hengsbach_Koppa_Holzweissig_Aydinöz_Taube_Hoyer_Starykov_Tonn_Niendorf_Tröster_et
al._2018, title={Inline additively manufactured functionally graded multi-materials:
microstructural and mechanical characterization of 316L parts with H13 layers},
volume={3}, DOI={10.1007/s40964-018-0044-4},
number={4}, journal={Progress in Additive Manufacturing}, publisher={Springer
Science and Business Media LLC}, author={Hengsbach, Florian and Koppa, Peter and
Holzweissig, Martin Joachim and Aydinöz, Mehmet Esat and Taube, Alexander and
Hoyer, Kay-Peter and Starykov, Oleksiy and Tonn, Babette and Niendorf, Thomas
and Tröster, Thomas and et al.}, year={2018}, pages={221–231} }'
chicago: 'Hengsbach, Florian, Peter Koppa, Martin Joachim Holzweissig, Mehmet Esat
Aydinöz, Alexander Taube, Kay-Peter Hoyer, Oleksiy Starykov, et al. “Inline Additively
Manufactured Functionally Graded Multi-Materials: Microstructural and Mechanical
Characterization of 316L Parts with H13 Layers.” Progress in Additive Manufacturing
3, no. 4 (2018): 221–31. https://doi.org/10.1007/s40964-018-0044-4.'
ieee: 'F. Hengsbach et al., “Inline additively manufactured functionally
graded multi-materials: microstructural and mechanical characterization of 316L
parts with H13 layers,” Progress in Additive Manufacturing, vol. 3, no.
4, pp. 221–231, 2018, doi: 10.1007/s40964-018-0044-4.'
mla: 'Hengsbach, Florian, et al. “Inline Additively Manufactured Functionally Graded
Multi-Materials: Microstructural and Mechanical Characterization of 316L Parts
with H13 Layers.” Progress in Additive Manufacturing, vol. 3, no. 4, Springer
Science and Business Media LLC, 2018, pp. 221–31, doi:10.1007/s40964-018-0044-4.'
short: F. Hengsbach, P. Koppa, M.J. Holzweissig, M.E. Aydinöz, A. Taube, K.-P. Hoyer,
O. Starykov, B. Tonn, T. Niendorf, T. Tröster, M. Schaper, Progress in Additive
Manufacturing 3 (2018) 221–231.
date_created: 2023-02-02T14:45:19Z
date_updated: 2025-06-06T08:28:06Z
department:
- _id: '9'
- _id: '158'
- _id: '149'
- _id: '321'
doi: 10.1007/s40964-018-0044-4
intvolume: ' 3'
issue: '4'
keyword:
- Industrial and Manufacturing Engineering
language:
- iso: eng
page: 221-231
publication: Progress in Additive Manufacturing
publication_identifier:
issn:
- 2363-9512
- 2363-9520
publication_status: published
publisher: Springer Science and Business Media LLC
quality_controlled: '1'
status: public
title: 'Inline additively manufactured functionally graded multi-materials: microstructural
and mechanical characterization of 316L parts with H13 layers'
type: journal_article
user_id: '15952'
volume: 3
year: '2018'
...
---
_id: '52205'
article_type: original
author:
- first_name: Heiko
full_name: Dunkelberg, Heiko
last_name: Dunkelberg
- first_name: Johannes
full_name: Wagner, Johannes
last_name: Wagner
- first_name: Conrad
full_name: Hannen, Conrad
last_name: Hannen
- first_name: Alexander
full_name: Schlüter, Alexander
id: '103302'
last_name: Schlüter
orcid: 0000-0002-2569-1624
- first_name: Long
full_name: Phan, Long
last_name: Phan
- first_name: Jens
full_name: Hesselbach, Jens
last_name: Hesselbach
- first_name: Cheng-Xian
full_name: Lin, Cheng-Xian
last_name: Lin
citation:
ama: Dunkelberg H, Wagner J, Hannen C, et al. Optimization of the energy supply
in the plastics industry to reduce the primary energy demand. Journal of Cleaner
Production. 2018;192:790-800. doi:10.1016/j.jclepro.2018.04.254
apa: Dunkelberg, H., Wagner, J., Hannen, C., Schlüter, A., Phan, L., Hesselbach,
J., & Lin, C.-X. (2018). Optimization of the energy supply in the plastics
industry to reduce the primary energy demand. Journal of Cleaner Production,
192, 790–800. https://doi.org/10.1016/j.jclepro.2018.04.254
bibtex: '@article{Dunkelberg_Wagner_Hannen_Schlüter_Phan_Hesselbach_Lin_2018, title={Optimization
of the energy supply in the plastics industry to reduce the primary energy demand},
volume={192}, DOI={10.1016/j.jclepro.2018.04.254},
journal={Journal of Cleaner Production}, publisher={Elsevier BV}, author={Dunkelberg,
Heiko and Wagner, Johannes and Hannen, Conrad and Schlüter, Alexander and Phan,
Long and Hesselbach, Jens and Lin, Cheng-Xian}, year={2018}, pages={790–800} }'
chicago: 'Dunkelberg, Heiko, Johannes Wagner, Conrad Hannen, Alexander Schlüter,
Long Phan, Jens Hesselbach, and Cheng-Xian Lin. “Optimization of the Energy Supply
in the Plastics Industry to Reduce the Primary Energy Demand.” Journal of Cleaner
Production 192 (2018): 790–800. https://doi.org/10.1016/j.jclepro.2018.04.254.'
ieee: 'H. Dunkelberg et al., “Optimization of the energy supply in the plastics
industry to reduce the primary energy demand,” Journal of Cleaner Production,
vol. 192, pp. 790–800, 2018, doi: 10.1016/j.jclepro.2018.04.254.'
mla: Dunkelberg, Heiko, et al. “Optimization of the Energy Supply in the Plastics
Industry to Reduce the Primary Energy Demand.” Journal of Cleaner Production,
vol. 192, Elsevier BV, 2018, pp. 790–800, doi:10.1016/j.jclepro.2018.04.254.
short: H. Dunkelberg, J. Wagner, C. Hannen, A. Schlüter, L. Phan, J. Hesselbach,
C.-X. Lin, Journal of Cleaner Production 192 (2018) 790–800.
date_created: 2024-02-29T10:26:02Z
date_updated: 2025-04-01T08:46:10Z
department:
- _id: '9'
- _id: '876'
- _id: '321'
doi: 10.1016/j.jclepro.2018.04.254
intvolume: ' 192'
keyword:
- Industrial and Manufacturing Engineering
- Strategy and Management
- General Environmental Science
- Renewable Energy
- Sustainability and the Environment
language:
- iso: eng
page: 790-800
publication: Journal of Cleaner Production
publication_identifier:
issn:
- 0959-6526
publication_status: published
publisher: Elsevier BV
status: public
title: Optimization of the energy supply in the plastics industry to reduce the primary
energy demand
type: journal_article
user_id: '22833'
volume: 192
year: '2018'
...
---
_id: '9974'
abstract:
- lang: eng
text: The integrated modeling of behavior and reliability in system development
delivers a model-based approach for reliability investigation by taking into account
the dynamic system behavior as well as the system architecture at different phases
of the development process. This approach features an automated synthesis of a
reliability model out of a behavior model enabling for the closed loop modeling
of degradation of the system and its (dynamic) behavior. The approach is integrated
into the development process following Systems Engineering. It is based on standard
models used in model-based development methodologies i.e. SysML or Matlab/Simulink.
In addition to the theoretical description of the necessary steps the procedure
is validated by an application example at two stages of the development process.
author:
- first_name: Julian
full_name: Hentze, Julian
id: '13342'
last_name: Hentze
- first_name: Thorben
full_name: Kaul, Thorben
id: '14802'
last_name: Kaul
- first_name: Iris
full_name: Grässler, Iris
last_name: Grässler
- first_name: Walter
full_name: Sextro, Walter
id: '21220'
last_name: Sextro
citation:
ama: 'Hentze J, Kaul T, Grässler I, Sextro W. Integrated modeling og behavior and
reliability in system development. In: ICED17, 21st International Conference
on Enginieering Design. ; 2017:385-394.'
apa: Hentze, J., Kaul, T., Grässler, I., & Sextro, W. (2017). Integrated modeling
og behavior and reliability in system development. In ICED17, 21st International
conference on enginieering design (pp. 385–394).
bibtex: '@inproceedings{Hentze_Kaul_Grässler_Sextro_2017, title={Integrated modeling
og behavior and reliability in system development}, booktitle={ICED17, 21st International
conference on enginieering design}, author={Hentze, Julian and Kaul, Thorben and
Grässler, Iris and Sextro, Walter}, year={2017}, pages={385–394} }'
chicago: Hentze, Julian, Thorben Kaul, Iris Grässler, and Walter Sextro. “Integrated
Modeling Og Behavior and Reliability in System Development.” In ICED17, 21st
International Conference on Enginieering Design, 385–94, 2017.
ieee: J. Hentze, T. Kaul, I. Grässler, and W. Sextro, “Integrated modeling og behavior
and reliability in system development,” in ICED17, 21st International conference
on enginieering design, 2017, pp. 385–394.
mla: Hentze, Julian, et al. “Integrated Modeling Og Behavior and Reliability in
System Development.” ICED17, 21st International Conference on Enginieering
Design, 2017, pp. 385–94.
short: 'J. Hentze, T. Kaul, I. Grässler, W. Sextro, in: ICED17, 21st International
Conference on Enginieering Design, 2017, pp. 385–394.'
date_created: 2019-05-27T09:35:48Z
date_updated: 2019-09-30T08:04:38Z
department:
- _id: '151'
keyword:
- Design for X (DfX)
- Product modelling / models
- Robust design
- Systems Engineering (SE)
- Reliability
language:
- iso: eng
page: 385-394
publication: ICED17, 21st International conference on enginieering design
quality_controlled: '1'
status: public
title: Integrated modeling og behavior and reliability in system development
type: conference
user_id: '55222'
year: '2017'
...
---
_id: '32493'
author:
- first_name: H.R.
full_name: Rakesh Ranga, H.R.
last_name: Rakesh Ranga
- first_name: O.P.
full_name: Korobeinichev, O.P.
last_name: Korobeinichev
- first_name: A.
full_name: Harish, A.
last_name: Harish
- first_name: Vasudevan
full_name: Raghavan, Vasudevan
last_name: Raghavan
- first_name: A.
full_name: Kumar, A.
last_name: Kumar
- first_name: I.E.
full_name: Gerasimov, I.E.
last_name: Gerasimov
- first_name: M.B.
full_name: Gonchikzhapov, M.B.
last_name: Gonchikzhapov
- first_name: A.G.
full_name: Tereshchenko, A.G.
last_name: Tereshchenko
- first_name: S.A.
full_name: Trubachev, S.A.
last_name: Trubachev
- first_name: A.G.
full_name: Shmakov, A.G.
last_name: Shmakov
citation:
ama: Rakesh Ranga HR, Korobeinichev OP, Harish A, et al. Investigation of the structure
and spread rate of flames over PMMA slabs. Applied Thermal Engineering.
2017;130:477-491. doi:10.1016/j.applthermaleng.2017.11.041
apa: Rakesh Ranga, H. R., Korobeinichev, O. P., Harish, A., Raghavan, V., Kumar,
A., Gerasimov, I. E., Gonchikzhapov, M. B., Tereshchenko, A. G., Trubachev, S.
A., & Shmakov, A. G. (2017). Investigation of the structure and spread rate
of flames over PMMA slabs. Applied Thermal Engineering, 130, 477–491.
https://doi.org/10.1016/j.applthermaleng.2017.11.041
bibtex: '@article{Rakesh Ranga_Korobeinichev_Harish_Raghavan_Kumar_Gerasimov_Gonchikzhapov_Tereshchenko_Trubachev_Shmakov_2017,
title={Investigation of the structure and spread rate of flames over PMMA slabs},
volume={130}, DOI={10.1016/j.applthermaleng.2017.11.041},
journal={Applied Thermal Engineering}, publisher={Elsevier BV}, author={Rakesh
Ranga, H.R. and Korobeinichev, O.P. and Harish, A. and Raghavan, Vasudevan and
Kumar, A. and Gerasimov, I.E. and Gonchikzhapov, M.B. and Tereshchenko, A.G. and
Trubachev, S.A. and Shmakov, A.G.}, year={2017}, pages={477–491} }'
chicago: 'Rakesh Ranga, H.R., O.P. Korobeinichev, A. Harish, Vasudevan Raghavan,
A. Kumar, I.E. Gerasimov, M.B. Gonchikzhapov, A.G. Tereshchenko, S.A. Trubachev,
and A.G. Shmakov. “Investigation of the Structure and Spread Rate of Flames over
PMMA Slabs.” Applied Thermal Engineering 130 (2017): 477–91. https://doi.org/10.1016/j.applthermaleng.2017.11.041.'
ieee: 'H. R. Rakesh Ranga et al., “Investigation of the structure and spread
rate of flames over PMMA slabs,” Applied Thermal Engineering, vol. 130,
pp. 477–491, 2017, doi: 10.1016/j.applthermaleng.2017.11.041.'
mla: Rakesh Ranga, H. R., et al. “Investigation of the Structure and Spread Rate
of Flames over PMMA Slabs.” Applied Thermal Engineering, vol. 130, Elsevier
BV, 2017, pp. 477–91, doi:10.1016/j.applthermaleng.2017.11.041.
short: H.R. Rakesh Ranga, O.P. Korobeinichev, A. Harish, V. Raghavan, A. Kumar,
I.E. Gerasimov, M.B. Gonchikzhapov, A.G. Tereshchenko, S.A. Trubachev, A.G. Shmakov,
Applied Thermal Engineering 130 (2017) 477–491.
date_created: 2022-08-02T10:22:25Z
date_updated: 2022-08-15T13:52:56Z
doi: 10.1016/j.applthermaleng.2017.11.041
intvolume: ' 130'
keyword:
- Industrial and Manufacturing Engineering
- Energy Engineering and Power Technology
language:
- iso: eng
page: 477-491
publication: Applied Thermal Engineering
publication_identifier:
issn:
- 1359-4311
publication_status: published
publisher: Elsevier BV
status: public
title: Investigation of the structure and spread rate of flames over PMMA slabs
type: journal_article
user_id: '94996'
volume: 130
year: '2017'
...
---
_id: '32481'
author:
- first_name: H.R.
full_name: Rakesh Ranga, H.R.
last_name: Rakesh Ranga
- first_name: O.P.
full_name: Korobeinichev, O.P.
last_name: Korobeinichev
- first_name: A.
full_name: Harish, A.
last_name: Harish
- first_name: Vasudevan
full_name: Raghavan, Vasudevan
last_name: Raghavan
- first_name: A.
full_name: Kumar, A.
last_name: Kumar
- first_name: I.E.
full_name: Gerasimov, I.E.
last_name: Gerasimov
- first_name: M.B.
full_name: Gonchikzhapov, M.B.
last_name: Gonchikzhapov
- first_name: A.G.
full_name: Tereshchenko, A.G.
last_name: Tereshchenko
- first_name: S.A.
full_name: Trubachev, S.A.
last_name: Trubachev
- first_name: A.G.
full_name: Shmakov, A.G.
last_name: Shmakov
citation:
ama: Rakesh Ranga HR, Korobeinichev OP, Harish A, et al. Investigation of the structure
and spread rate of flames over PMMA slabs. Applied Thermal Engineering.
2017;130:477-491. doi:10.1016/j.applthermaleng.2017.11.041
apa: Rakesh Ranga, H. R., Korobeinichev, O. P., Harish, A., Raghavan, V., Kumar,
A., Gerasimov, I. E., Gonchikzhapov, M. B., Tereshchenko, A. G., Trubachev, S.
A., & Shmakov, A. G. (2017). Investigation of the structure and spread rate
of flames over PMMA slabs. Applied Thermal Engineering, 130, 477–491.
https://doi.org/10.1016/j.applthermaleng.2017.11.041
bibtex: '@article{Rakesh Ranga_Korobeinichev_Harish_Raghavan_Kumar_Gerasimov_Gonchikzhapov_Tereshchenko_Trubachev_Shmakov_2017,
title={Investigation of the structure and spread rate of flames over PMMA slabs},
volume={130}, DOI={10.1016/j.applthermaleng.2017.11.041},
journal={Applied Thermal Engineering}, publisher={Elsevier BV}, author={Rakesh
Ranga, H.R. and Korobeinichev, O.P. and Harish, A. and Raghavan, Vasudevan and
Kumar, A. and Gerasimov, I.E. and Gonchikzhapov, M.B. and Tereshchenko, A.G. and
Trubachev, S.A. and Shmakov, A.G.}, year={2017}, pages={477–491} }'
chicago: 'Rakesh Ranga, H.R., O.P. Korobeinichev, A. Harish, Vasudevan Raghavan,
A. Kumar, I.E. Gerasimov, M.B. Gonchikzhapov, A.G. Tereshchenko, S.A. Trubachev,
and A.G. Shmakov. “Investigation of the Structure and Spread Rate of Flames over
PMMA Slabs.” Applied Thermal Engineering 130 (2017): 477–91. https://doi.org/10.1016/j.applthermaleng.2017.11.041.'
ieee: 'H. R. Rakesh Ranga et al., “Investigation of the structure and spread
rate of flames over PMMA slabs,” Applied Thermal Engineering, vol. 130,
pp. 477–491, 2017, doi: 10.1016/j.applthermaleng.2017.11.041.'
mla: Rakesh Ranga, H. R., et al. “Investigation of the Structure and Spread Rate
of Flames over PMMA Slabs.” Applied Thermal Engineering, vol. 130, Elsevier
BV, 2017, pp. 477–91, doi:10.1016/j.applthermaleng.2017.11.041.
short: H.R. Rakesh Ranga, O.P. Korobeinichev, A. Harish, V. Raghavan, A. Kumar,
I.E. Gerasimov, M.B. Gonchikzhapov, A.G. Tereshchenko, S.A. Trubachev, A.G. Shmakov,
Applied Thermal Engineering 130 (2017) 477–491.
date_created: 2022-08-02T10:20:08Z
date_updated: 2022-08-15T13:54:07Z
doi: 10.1016/j.applthermaleng.2017.11.041
intvolume: ' 130'
keyword:
- Industrial and Manufacturing Engineering
- Energy Engineering and Power Technology
language:
- iso: eng
page: 477-491
publication: Applied Thermal Engineering
publication_identifier:
issn:
- 1359-4311
publication_status: published
publisher: Elsevier BV
status: public
title: Investigation of the structure and spread rate of flames over PMMA slabs
type: journal_article
user_id: '94996'
volume: 130
year: '2017'
...
---
_id: '47586'
author:
- first_name: Stefan
full_name: Lier, Stefan
last_name: Lier
- first_name: Julia
full_name: Riese, Julia
id: '101499'
last_name: Riese
orcid: 0000-0002-3053-0534
- first_name: Gordana
full_name: Cvetanoska, Gordana
last_name: Cvetanoska
- first_name: Anna Katharina
full_name: Lesniak, Anna Katharina
last_name: Lesniak
- first_name: Stephan
full_name: Müller, Stephan
last_name: Müller
- first_name: Sarah
full_name: Paul, Sarah
last_name: Paul
- first_name: Laura
full_name: Sengen, Laura
last_name: Sengen
- first_name: Marcus
full_name: Grünewald, Marcus
last_name: Grünewald
citation:
ama: Lier S, Riese J, Cvetanoska G, et al. Innovative scaling strategies for a fast
development of apparatuses by modular process engineering. Chemical Engineering
and Processing - Process Intensification. 2017;123:111-125. doi:10.1016/j.cep.2017.10.026
apa: Lier, S., Riese, J., Cvetanoska, G., Lesniak, A. K., Müller, S., Paul, S.,
Sengen, L., & Grünewald, M. (2017). Innovative scaling strategies for a fast
development of apparatuses by modular process engineering. Chemical Engineering
and Processing - Process Intensification, 123, 111–125. https://doi.org/10.1016/j.cep.2017.10.026
bibtex: '@article{Lier_Riese_Cvetanoska_Lesniak_Müller_Paul_Sengen_Grünewald_2017,
title={Innovative scaling strategies for a fast development of apparatuses by
modular process engineering}, volume={123}, DOI={10.1016/j.cep.2017.10.026},
journal={Chemical Engineering and Processing - Process Intensification}, publisher={Elsevier
BV}, author={Lier, Stefan and Riese, Julia and Cvetanoska, Gordana and Lesniak,
Anna Katharina and Müller, Stephan and Paul, Sarah and Sengen, Laura and Grünewald,
Marcus}, year={2017}, pages={111–125} }'
chicago: 'Lier, Stefan, Julia Riese, Gordana Cvetanoska, Anna Katharina Lesniak,
Stephan Müller, Sarah Paul, Laura Sengen, and Marcus Grünewald. “Innovative Scaling
Strategies for a Fast Development of Apparatuses by Modular Process Engineering.”
Chemical Engineering and Processing - Process Intensification 123 (2017):
111–25. https://doi.org/10.1016/j.cep.2017.10.026.'
ieee: 'S. Lier et al., “Innovative scaling strategies for a fast development
of apparatuses by modular process engineering,” Chemical Engineering and Processing
- Process Intensification, vol. 123, pp. 111–125, 2017, doi: 10.1016/j.cep.2017.10.026.'
mla: Lier, Stefan, et al. “Innovative Scaling Strategies for a Fast Development
of Apparatuses by Modular Process Engineering.” Chemical Engineering and Processing
- Process Intensification, vol. 123, Elsevier BV, 2017, pp. 111–25, doi:10.1016/j.cep.2017.10.026.
short: S. Lier, J. Riese, G. Cvetanoska, A.K. Lesniak, S. Müller, S. Paul, L. Sengen,
M. Grünewald, Chemical Engineering and Processing - Process Intensification 123
(2017) 111–125.
date_created: 2023-10-04T14:19:52Z
date_updated: 2024-03-08T11:32:13Z
doi: 10.1016/j.cep.2017.10.026
extern: '1'
intvolume: ' 123'
keyword:
- Industrial and Manufacturing Engineering
- Process Chemistry and Technology
- Energy Engineering and Power Technology
- General Chemical Engineering
- General Chemistry
language:
- iso: eng
page: 111-125
publication: Chemical Engineering and Processing - Process Intensification
publication_identifier:
issn:
- 0255-2701
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: Innovative scaling strategies for a fast development of apparatuses by modular
process engineering
type: journal_article
user_id: '101499'
volume: 123
year: '2017'
...
---
_id: '45018'
author:
- first_name: Frithjof H.
full_name: Dubberke, Frithjof H.
last_name: Dubberke
- first_name: Matthias
full_name: Linnemann, Matthias
last_name: Linnemann
- first_name: Wameedh Khider
full_name: Abbas, Wameedh Khider
last_name: Abbas
- first_name: Elmar
full_name: Baumhögger, Elmar
last_name: Baumhögger
- first_name: Klaus-Peter
full_name: Priebe, Klaus-Peter
last_name: Priebe
- first_name: Maximilian
full_name: Roedder, Maximilian
last_name: Roedder
- first_name: Matthias
full_name: Neef, Matthias
last_name: Neef
- first_name: Jadran
full_name: Vrabec, Jadran
last_name: Vrabec
citation:
ama: Dubberke FH, Linnemann M, Abbas WK, et al. Experimental setup of a cascaded
two-stage organic Rankine cycle. Applied Thermal Engineering. 2017;131:958-964.
doi:10.1016/j.applthermaleng.2017.11.137
apa: Dubberke, F. H., Linnemann, M., Abbas, W. K., Baumhögger, E., Priebe, K.-P.,
Roedder, M., Neef, M., & Vrabec, J. (2017). Experimental setup of a cascaded
two-stage organic Rankine cycle. Applied Thermal Engineering, 131,
958–964. https://doi.org/10.1016/j.applthermaleng.2017.11.137
bibtex: '@article{Dubberke_Linnemann_Abbas_Baumhögger_Priebe_Roedder_Neef_Vrabec_2017,
title={Experimental setup of a cascaded two-stage organic Rankine cycle}, volume={131},
DOI={10.1016/j.applthermaleng.2017.11.137},
journal={Applied Thermal Engineering}, publisher={Elsevier BV}, author={Dubberke,
Frithjof H. and Linnemann, Matthias and Abbas, Wameedh Khider and Baumhögger,
Elmar and Priebe, Klaus-Peter and Roedder, Maximilian and Neef, Matthias and Vrabec,
Jadran}, year={2017}, pages={958–964} }'
chicago: 'Dubberke, Frithjof H., Matthias Linnemann, Wameedh Khider Abbas, Elmar
Baumhögger, Klaus-Peter Priebe, Maximilian Roedder, Matthias Neef, and Jadran
Vrabec. “Experimental Setup of a Cascaded Two-Stage Organic Rankine Cycle.” Applied
Thermal Engineering 131 (2017): 958–64. https://doi.org/10.1016/j.applthermaleng.2017.11.137.'
ieee: 'F. H. Dubberke et al., “Experimental setup of a cascaded two-stage
organic Rankine cycle,” Applied Thermal Engineering, vol. 131, pp. 958–964,
2017, doi: 10.1016/j.applthermaleng.2017.11.137.'
mla: Dubberke, Frithjof H., et al. “Experimental Setup of a Cascaded Two-Stage Organic
Rankine Cycle.” Applied Thermal Engineering, vol. 131, Elsevier BV, 2017,
pp. 958–64, doi:10.1016/j.applthermaleng.2017.11.137.
short: F.H. Dubberke, M. Linnemann, W.K. Abbas, E. Baumhögger, K.-P. Priebe, M.
Roedder, M. Neef, J. Vrabec, Applied Thermal Engineering 131 (2017) 958–964.
date_created: 2023-05-17T06:53:56Z
date_updated: 2023-07-12T07:58:52Z
doi: 10.1016/j.applthermaleng.2017.11.137
intvolume: ' 131'
keyword:
- Industrial and Manufacturing Engineering
- Energy Engineering and Power Technology
language:
- iso: eng
page: 958-964
publication: Applied Thermal Engineering
publication_identifier:
issn:
- 1359-4311
publication_status: published
publisher: Elsevier BV
status: public
title: Experimental setup of a cascaded two-stage organic Rankine cycle
type: journal_article
user_id: '59261'
volume: 131
year: '2017'
...
---
_id: '47990'
abstract:
- lang: eng
text: "Abstract\r\n Unternehmen,
die über das Outsourcing von Personalfunktionen entscheiden, stehen vor einer
komplexen Fragestellung, da mit dem Bezug extern erbrachter Personaldienstleistungen
sehr unterschiedliche Wirkungen ausgelöst werden können. Diverse Theorieansätze
machen Aussagen zu einzelnen Wirkungskategorien des Outsourcings. Jedoch gibt
bisher kein Ansatz dem Entscheidungsträger in der Praxis eine umfassende Entscheidungshilfe.
Hier setzt der vorliegende Artikel an: Aus Ansätzen zur zwischenbetrieblichen
Arbeitsteilung wird ein umfassendes „Wirkungsset“ des Outsourcings von Personalfunktionen
hergeleitet, welches sich als Checkliste relevanter Wirkungskategorien eignet
und die Einseitigkeiten bisheriger Ansätze vermeidet."
author:
- first_name: Dorothea
full_name: Alewell, Dorothea
last_name: Alewell
- first_name: Katrin
full_name: Bähring, Katrin
last_name: Bähring
- first_name: Kirsten
full_name: Thommes, Kirsten
id: '72497'
last_name: Thommes
citation:
ama: Alewell D, Bähring K, Thommes K. Die Wirkungen des Outsourcings von Personalfunktionen
– ein Überblick über verschiedene theoretische Ansätze und Entwicklung eines umfassenden
Wirkungssets/ Effects of the outsourcing of personnel functions – an overview
of several theoretical approaches and development of a comprehensive set of effects.
Arbeit. 2016;16(4):282-295. doi:10.1515/arbeit-2007-0404
apa: Alewell, D., Bähring, K., & Thommes, K. (2016). Die Wirkungen des Outsourcings
von Personalfunktionen – ein Überblick über verschiedene theoretische Ansätze
und Entwicklung eines umfassenden Wirkungssets/ Effects of the outsourcing of
personnel functions – an overview of several theoretical approaches and development
of a comprehensive set of effects. Arbeit, 16(4), 282–295. https://doi.org/10.1515/arbeit-2007-0404
bibtex: '@article{Alewell_Bähring_Thommes_2016, title={Die Wirkungen des Outsourcings
von Personalfunktionen – ein Überblick über verschiedene theoretische Ansätze
und Entwicklung eines umfassenden Wirkungssets/ Effects of the outsourcing of
personnel functions – an overview of several theoretical approaches and development
of a comprehensive set of effects}, volume={16}, DOI={10.1515/arbeit-2007-0404},
number={4}, journal={Arbeit}, publisher={Walter de Gruyter GmbH}, author={Alewell,
Dorothea and Bähring, Katrin and Thommes, Kirsten}, year={2016}, pages={282–295}
}'
chicago: 'Alewell, Dorothea, Katrin Bähring, and Kirsten Thommes. “Die Wirkungen
Des Outsourcings von Personalfunktionen – Ein Überblick Über Verschiedene Theoretische
Ansätze Und Entwicklung Eines Umfassenden Wirkungssets/ Effects of the Outsourcing
of Personnel Functions – an Overview of Several Theoretical Approaches and Development
of a Comprehensive Set of Effects.” Arbeit 16, no. 4 (2016): 282–95. https://doi.org/10.1515/arbeit-2007-0404.'
ieee: 'D. Alewell, K. Bähring, and K. Thommes, “Die Wirkungen des Outsourcings von
Personalfunktionen – ein Überblick über verschiedene theoretische Ansätze und
Entwicklung eines umfassenden Wirkungssets/ Effects of the outsourcing of personnel
functions – an overview of several theoretical approaches and development of a
comprehensive set of effects,” Arbeit, vol. 16, no. 4, pp. 282–295, 2016,
doi: 10.1515/arbeit-2007-0404.'
mla: Alewell, Dorothea, et al. “Die Wirkungen Des Outsourcings von Personalfunktionen
– Ein Überblick Über Verschiedene Theoretische Ansätze Und Entwicklung Eines Umfassenden
Wirkungssets/ Effects of the Outsourcing of Personnel Functions – an Overview
of Several Theoretical Approaches and Development of a Comprehensive Set of Effects.”
Arbeit, vol. 16, no. 4, Walter de Gruyter GmbH, 2016, pp. 282–95, doi:10.1515/arbeit-2007-0404.
short: D. Alewell, K. Bähring, K. Thommes, Arbeit 16 (2016) 282–295.
date_created: 2023-10-11T09:01:02Z
date_updated: 2023-12-05T10:16:18Z
department:
- _id: '184'
- _id: '178'
doi: 10.1515/arbeit-2007-0404
intvolume: ' 16'
issue: '4'
keyword:
- Industrial and Manufacturing Engineering
language:
- iso: eng
page: 282-295
publication: Arbeit
publication_identifier:
issn:
- 2365-984X
- 0941-5025
publication_status: published
publisher: Walter de Gruyter GmbH
status: public
title: Die Wirkungen des Outsourcings von Personalfunktionen – ein Überblick über
verschiedene theoretische Ansätze und Entwicklung eines umfassenden Wirkungssets/
Effects of the outsourcing of personnel functions – an overview of several theoretical
approaches and development of a comprehensive set of effects
type: journal_article
user_id: '42933'
volume: 16
year: '2016'
...
---
_id: '41532'
author:
- first_name: Wolfgang
full_name: Tillmann, Wolfgang
last_name: Tillmann
- first_name: Christoph
full_name: Schaak, Christoph
last_name: Schaak
- first_name: J.
full_name: Nellesen, J.
last_name: Nellesen
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
- first_name: Mehmet Esat
full_name: Aydinöz, Mehmet Esat
last_name: Aydinöz
- first_name: Kay-Peter
full_name: Hoyer, Kay-Peter
id: '48411'
last_name: Hoyer
citation:
ama: Tillmann W, Schaak C, Nellesen J, Schaper M, Aydinöz ME, Hoyer K-P. Hot isostatic
pressing of IN718 components manufactured by selective laser melting. Additive
Manufacturing. 2016;13:93-102. doi:10.1016/j.addma.2016.11.006
apa: Tillmann, W., Schaak, C., Nellesen, J., Schaper, M., Aydinöz, M. E., &
Hoyer, K.-P. (2016). Hot isostatic pressing of IN718 components manufactured by
selective laser melting. Additive Manufacturing, 13, 93–102. https://doi.org/10.1016/j.addma.2016.11.006
bibtex: '@article{Tillmann_Schaak_Nellesen_Schaper_Aydinöz_Hoyer_2016, title={Hot
isostatic pressing of IN718 components manufactured by selective laser melting},
volume={13}, DOI={10.1016/j.addma.2016.11.006},
journal={Additive Manufacturing}, publisher={Elsevier BV}, author={Tillmann, Wolfgang
and Schaak, Christoph and Nellesen, J. and Schaper, Mirko and Aydinöz, Mehmet
Esat and Hoyer, Kay-Peter}, year={2016}, pages={93–102} }'
chicago: 'Tillmann, Wolfgang, Christoph Schaak, J. Nellesen, Mirko Schaper, Mehmet
Esat Aydinöz, and Kay-Peter Hoyer. “Hot Isostatic Pressing of IN718 Components
Manufactured by Selective Laser Melting.” Additive Manufacturing 13 (2016):
93–102. https://doi.org/10.1016/j.addma.2016.11.006.'
ieee: 'W. Tillmann, C. Schaak, J. Nellesen, M. Schaper, M. E. Aydinöz, and K.-P.
Hoyer, “Hot isostatic pressing of IN718 components manufactured by selective laser
melting,” Additive Manufacturing, vol. 13, pp. 93–102, 2016, doi: 10.1016/j.addma.2016.11.006.'
mla: Tillmann, Wolfgang, et al. “Hot Isostatic Pressing of IN718 Components Manufactured
by Selective Laser Melting.” Additive Manufacturing, vol. 13, Elsevier
BV, 2016, pp. 93–102, doi:10.1016/j.addma.2016.11.006.
short: W. Tillmann, C. Schaak, J. Nellesen, M. Schaper, M.E. Aydinöz, K.-P. Hoyer,
Additive Manufacturing 13 (2016) 93–102.
date_created: 2023-02-02T14:49:08Z
date_updated: 2023-04-27T16:50:19Z
department:
- _id: '9'
- _id: '158'
doi: 10.1016/j.addma.2016.11.006
intvolume: ' 13'
keyword:
- Industrial and Manufacturing Engineering
- Engineering (miscellaneous)
- General Materials Science
- Biomedical Engineering
language:
- iso: eng
page: 93-102
publication: Additive Manufacturing
publication_identifier:
issn:
- 2214-8604
publication_status: published
publisher: Elsevier BV
status: public
title: Hot isostatic pressing of IN718 components manufactured by selective laser
melting
type: journal_article
user_id: '48411'
volume: 13
year: '2016'
...
---
_id: '52207'
article_type: original
author:
- first_name: Alexander
full_name: Schlüter, Alexander
id: '103302'
last_name: Schlüter
orcid: 0000-0002-2569-1624
- first_name: Michele B.
full_name: Rosano, Michele B.
last_name: Rosano
citation:
ama: Schlüter A, Rosano MB. A holistic approach to energy efficiency assessment
in plastic processing. Journal of Cleaner Production. 2016;118:19-28. doi:10.1016/j.jclepro.2016.01.037
apa: Schlüter, A., & Rosano, M. B. (2016). A holistic approach to energy efficiency
assessment in plastic processing. Journal of Cleaner Production, 118,
19–28. https://doi.org/10.1016/j.jclepro.2016.01.037
bibtex: '@article{Schlüter_Rosano_2016, title={A holistic approach to energy efficiency
assessment in plastic processing}, volume={118}, DOI={10.1016/j.jclepro.2016.01.037},
journal={Journal of Cleaner Production}, publisher={Elsevier BV}, author={Schlüter,
Alexander and Rosano, Michele B.}, year={2016}, pages={19–28} }'
chicago: 'Schlüter, Alexander, and Michele B. Rosano. “A Holistic Approach to Energy
Efficiency Assessment in Plastic Processing.” Journal of Cleaner Production
118 (2016): 19–28. https://doi.org/10.1016/j.jclepro.2016.01.037.'
ieee: 'A. Schlüter and M. B. Rosano, “A holistic approach to energy efficiency assessment
in plastic processing,” Journal of Cleaner Production, vol. 118, pp. 19–28,
2016, doi: 10.1016/j.jclepro.2016.01.037.'
mla: Schlüter, Alexander, and Michele B. Rosano. “A Holistic Approach to Energy
Efficiency Assessment in Plastic Processing.” Journal of Cleaner Production,
vol. 118, Elsevier BV, 2016, pp. 19–28, doi:10.1016/j.jclepro.2016.01.037.
short: A. Schlüter, M.B. Rosano, Journal of Cleaner Production 118 (2016) 19–28.
date_created: 2024-02-29T10:56:41Z
date_updated: 2025-04-01T08:45:17Z
department:
- _id: '9'
- _id: '876'
- _id: '321'
doi: 10.1016/j.jclepro.2016.01.037
intvolume: ' 118'
keyword:
- Industrial and Manufacturing Engineering
- Strategy and Management
- General Environmental Science
- Renewable Energy
- Sustainability and the Environment
language:
- iso: eng
page: 19-28
publication: Journal of Cleaner Production
publication_identifier:
issn:
- 0959-6526
publication_status: published
publisher: Elsevier BV
status: public
title: A holistic approach to energy efficiency assessment in plastic processing
type: journal_article
user_id: '22833'
volume: 118
year: '2016'
...
---
_id: '30601'
author:
- first_name: Jitendra
full_name: Solanki, Jitendra
last_name: Solanki
- first_name: Norbert
full_name: Fröhleke, Norbert
last_name: Fröhleke
- first_name: Joachim
full_name: Böcker, Joachim
id: '66'
last_name: Böcker
orcid: 0000-0002-8480-7295
- first_name: Gregor
full_name: Duppe, Gregor
last_name: Duppe
- first_name: Andreas
full_name: Averberg, Andreas
last_name: Averberg
- first_name: Peter
full_name: Wallmeier, Peter
last_name: Wallmeier
citation:
ama: Solanki J, Fröhleke N, Böcker J, Duppe G, Averberg A, Wallmeier P. Voltage-Sequence-Control-Based
High-Current Rectifier System. IEEE Transactions on Industry Applications.
2015;51(5):3995-4005. doi:10.1109/tia.2015.2422772
apa: Solanki, J., Fröhleke, N., Böcker, J., Duppe, G., Averberg, A., & Wallmeier,
P. (2015). Voltage-Sequence-Control-Based High-Current Rectifier System. IEEE
Transactions on Industry Applications, 51(5), 3995–4005. https://doi.org/10.1109/tia.2015.2422772
bibtex: '@article{Solanki_Fröhleke_Böcker_Duppe_Averberg_Wallmeier_2015, title={Voltage-Sequence-Control-Based
High-Current Rectifier System}, volume={51}, DOI={10.1109/tia.2015.2422772},
number={5}, journal={IEEE Transactions on Industry Applications}, publisher={Institute
of Electrical and Electronics Engineers (IEEE)}, author={Solanki, Jitendra and
Fröhleke, Norbert and Böcker, Joachim and Duppe, Gregor and Averberg, Andreas
and Wallmeier, Peter}, year={2015}, pages={3995–4005} }'
chicago: 'Solanki, Jitendra, Norbert Fröhleke, Joachim Böcker, Gregor Duppe, Andreas
Averberg, and Peter Wallmeier. “Voltage-Sequence-Control-Based High-Current Rectifier
System.” IEEE Transactions on Industry Applications 51, no. 5 (2015): 3995–4005.
https://doi.org/10.1109/tia.2015.2422772.'
ieee: 'J. Solanki, N. Fröhleke, J. Böcker, G. Duppe, A. Averberg, and P. Wallmeier,
“Voltage-Sequence-Control-Based High-Current Rectifier System,” IEEE Transactions
on Industry Applications, vol. 51, no. 5, pp. 3995–4005, 2015, doi: 10.1109/tia.2015.2422772.'
mla: Solanki, Jitendra, et al. “Voltage-Sequence-Control-Based High-Current Rectifier
System.” IEEE Transactions on Industry Applications, vol. 51, no. 5, Institute
of Electrical and Electronics Engineers (IEEE), 2015, pp. 3995–4005, doi:10.1109/tia.2015.2422772.
short: J. Solanki, N. Fröhleke, J. Böcker, G. Duppe, A. Averberg, P. Wallmeier,
IEEE Transactions on Industry Applications 51 (2015) 3995–4005.
date_created: 2022-03-28T07:40:12Z
date_updated: 2022-03-28T08:38:01Z
department:
- _id: '52'
doi: 10.1109/tia.2015.2422772
intvolume: ' 51'
issue: '5'
keyword:
- Electrical and Electronic Engineering
- Industrial and Manufacturing Engineering
- Control and Systems Engineering
language:
- iso: eng
page: 3995-4005
publication: IEEE Transactions on Industry Applications
publication_identifier:
issn:
- 0093-9994
- 1939-9367
publication_status: published
publisher: Institute of Electrical and Electronics Engineers (IEEE)
status: public
title: Voltage-Sequence-Control-Based High-Current Rectifier System
type: journal_article
user_id: '66'
volume: 51
year: '2015'
...
---
_id: '46969'
author:
- first_name: Mark
full_name: Piper, Mark
last_name: Piper
- first_name: Julian M.
full_name: Tran, Julian M.
last_name: Tran
- first_name: Eugeny Y.
full_name: Kenig, Eugeny Y.
id: '665'
last_name: Kenig
citation:
ama: Piper M, Tran JM, Kenig EY. CFD-Untersuchung der Fluiddynamik und des Wärmeübergangs
bei einphasiger Strömung im welligen Spalt zwischen Thermoblechen. Chemie Ingenieur
Technik. 2015;87(3):216-225. doi:10.1002/cite.201400091
apa: Piper, M., Tran, J. M., & Kenig, E. Y. (2015). CFD-Untersuchung der Fluiddynamik
und des Wärmeübergangs bei einphasiger Strömung im welligen Spalt zwischen Thermoblechen.
Chemie Ingenieur Technik, 87(3), 216–225. https://doi.org/10.1002/cite.201400091
bibtex: '@article{Piper_Tran_Kenig_2015, title={CFD-Untersuchung der Fluiddynamik
und des Wärmeübergangs bei einphasiger Strömung im welligen Spalt zwischen Thermoblechen},
volume={87}, DOI={10.1002/cite.201400091},
number={3}, journal={Chemie Ingenieur Technik}, publisher={Wiley}, author={Piper,
Mark and Tran, Julian M. and Kenig, Eugeny Y.}, year={2015}, pages={216–225} }'
chicago: 'Piper, Mark, Julian M. Tran, and Eugeny Y. Kenig. “CFD-Untersuchung Der
Fluiddynamik Und Des Wärmeübergangs Bei Einphasiger Strömung Im Welligen Spalt
Zwischen Thermoblechen.” Chemie Ingenieur Technik 87, no. 3 (2015): 216–25.
https://doi.org/10.1002/cite.201400091.'
ieee: 'M. Piper, J. M. Tran, and E. Y. Kenig, “CFD-Untersuchung der Fluiddynamik
und des Wärmeübergangs bei einphasiger Strömung im welligen Spalt zwischen Thermoblechen,”
Chemie Ingenieur Technik, vol. 87, no. 3, pp. 216–225, 2015, doi: 10.1002/cite.201400091.'
mla: Piper, Mark, et al. “CFD-Untersuchung Der Fluiddynamik Und Des Wärmeübergangs
Bei Einphasiger Strömung Im Welligen Spalt Zwischen Thermoblechen.” Chemie
Ingenieur Technik, vol. 87, no. 3, Wiley, 2015, pp. 216–25, doi:10.1002/cite.201400091.
short: M. Piper, J.M. Tran, E.Y. Kenig, Chemie Ingenieur Technik 87 (2015) 216–225.
date_created: 2023-09-12T08:11:39Z
date_updated: 2023-09-12T08:14:13Z
department:
- _id: '145'
doi: 10.1002/cite.201400091
intvolume: ' 87'
issue: '3'
keyword:
- Industrial and Manufacturing Engineering
- General Chemical Engineering
- General Chemistry
language:
- iso: eng
page: 216-225
publication: Chemie Ingenieur Technik
publication_identifier:
issn:
- 0009-286X
publication_status: published
publisher: Wiley
quality_controlled: '1'
status: public
title: CFD-Untersuchung der Fluiddynamik und des Wärmeübergangs bei einphasiger Strömung
im welligen Spalt zwischen Thermoblechen
type: journal_article
user_id: '90390'
volume: 87
year: '2015'
...
---
_id: '39697'
article_number: '062504'
author:
- first_name: Dena M.
full_name: Agra-Kooijman, Dena M.
last_name: Agra-Kooijman
- first_name: Gautam
full_name: Singh, Gautam
last_name: Singh
- first_name: Alexander
full_name: Lorenz, Alexander
last_name: Lorenz
- first_name: Peter J.
full_name: Collings, Peter J.
last_name: Collings
- first_name: Heinz-Siegfried
full_name: Kitzerow, Heinz-Siegfried
id: '254'
last_name: Kitzerow
- first_name: Satyendra
full_name: Kumar, Satyendra
last_name: Kumar
citation:
ama: Agra-Kooijman DM, Singh G, Lorenz A, Collings PJ, Kitzerow H-S, Kumar S. Columnar
molecular aggregation in the aqueous solutions of disodium cromoglycate. Physical
Review E. 2014;89(6). doi:10.1103/physreve.89.062504
apa: Agra-Kooijman, D. M., Singh, G., Lorenz, A., Collings, P. J., Kitzerow, H.-S.,
& Kumar, S. (2014). Columnar molecular aggregation in the aqueous solutions
of disodium cromoglycate. Physical Review E, 89(6), Article 062504.
https://doi.org/10.1103/physreve.89.062504
bibtex: '@article{Agra-Kooijman_Singh_Lorenz_Collings_Kitzerow_Kumar_2014, title={Columnar
molecular aggregation in the aqueous solutions of disodium cromoglycate}, volume={89},
DOI={10.1103/physreve.89.062504},
number={6062504}, journal={Physical Review E}, publisher={American Physical Society
(APS)}, author={Agra-Kooijman, Dena M. and Singh, Gautam and Lorenz, Alexander
and Collings, Peter J. and Kitzerow, Heinz-Siegfried and Kumar, Satyendra}, year={2014}
}'
chicago: Agra-Kooijman, Dena M., Gautam Singh, Alexander Lorenz, Peter J. Collings,
Heinz-Siegfried Kitzerow, and Satyendra Kumar. “Columnar Molecular Aggregation
in the Aqueous Solutions of Disodium Cromoglycate.” Physical Review E 89,
no. 6 (2014). https://doi.org/10.1103/physreve.89.062504.
ieee: 'D. M. Agra-Kooijman, G. Singh, A. Lorenz, P. J. Collings, H.-S. Kitzerow,
and S. Kumar, “Columnar molecular aggregation in the aqueous solutions of disodium
cromoglycate,” Physical Review E, vol. 89, no. 6, Art. no. 062504, 2014,
doi: 10.1103/physreve.89.062504.'
mla: Agra-Kooijman, Dena M., et al. “Columnar Molecular Aggregation in the Aqueous
Solutions of Disodium Cromoglycate.” Physical Review E, vol. 89, no. 6,
062504, American Physical Society (APS), 2014, doi:10.1103/physreve.89.062504.
short: D.M. Agra-Kooijman, G. Singh, A. Lorenz, P.J. Collings, H.-S. Kitzerow, S.
Kumar, Physical Review E 89 (2014).
date_created: 2023-01-24T18:17:35Z
date_updated: 2023-01-24T18:18:01Z
department:
- _id: '313'
- _id: '230'
- _id: '638'
doi: 10.1103/physreve.89.062504
intvolume: ' 89'
issue: '6'
keyword:
- Industrial and Manufacturing Engineering
- Metals and Alloys
- Strategy and Management
- Mechanical Engineering
language:
- iso: eng
publication: Physical Review E
publication_identifier:
issn:
- 1539-3755
- 1550-2376
publication_status: published
publisher: American Physical Society (APS)
status: public
title: Columnar molecular aggregation in the aqueous solutions of disodium cromoglycate
type: journal_article
user_id: '254'
volume: 89
year: '2014'
...
---
_id: '39713'
article_number: '062513'
author:
- first_name: Christine K.
full_name: McGinn, Christine K.
last_name: McGinn
- first_name: Laura I.
full_name: Laderman, Laura I.
last_name: Laderman
- first_name: Natalie
full_name: Zimmermann, Natalie
last_name: Zimmermann
- first_name: Heinz-Siegfried
full_name: Kitzerow, Heinz-Siegfried
id: '254'
last_name: Kitzerow
- first_name: Peter J.
full_name: Collings, Peter J.
last_name: Collings
citation:
ama: McGinn CK, Laderman LI, Zimmermann N, Kitzerow H-S, Collings PJ. Planar anchoring
strength and pitch measurements in achiral and chiral chromonic liquid crystals
using 90-degree twist cells. Physical Review E. 2014;88(6). doi:10.1103/physreve.88.062513
apa: McGinn, C. K., Laderman, L. I., Zimmermann, N., Kitzerow, H.-S., & Collings,
P. J. (2014). Planar anchoring strength and pitch measurements in achiral and
chiral chromonic liquid crystals using 90-degree twist cells. Physical Review
E, 88(6), Article 062513. https://doi.org/10.1103/physreve.88.062513
bibtex: '@article{McGinn_Laderman_Zimmermann_Kitzerow_Collings_2014, title={Planar
anchoring strength and pitch measurements in achiral and chiral chromonic liquid
crystals using 90-degree twist cells}, volume={88}, DOI={10.1103/physreve.88.062513},
number={6062513}, journal={Physical Review E}, publisher={American Physical Society
(APS)}, author={McGinn, Christine K. and Laderman, Laura I. and Zimmermann, Natalie
and Kitzerow, Heinz-Siegfried and Collings, Peter J.}, year={2014} }'
chicago: McGinn, Christine K., Laura I. Laderman, Natalie Zimmermann, Heinz-Siegfried
Kitzerow, and Peter J. Collings. “Planar Anchoring Strength and Pitch Measurements
in Achiral and Chiral Chromonic Liquid Crystals Using 90-Degree Twist Cells.”
Physical Review E 88, no. 6 (2014). https://doi.org/10.1103/physreve.88.062513.
ieee: 'C. K. McGinn, L. I. Laderman, N. Zimmermann, H.-S. Kitzerow, and P. J. Collings,
“Planar anchoring strength and pitch measurements in achiral and chiral chromonic
liquid crystals using 90-degree twist cells,” Physical Review E, vol. 88,
no. 6, Art. no. 062513, 2014, doi: 10.1103/physreve.88.062513.'
mla: McGinn, Christine K., et al. “Planar Anchoring Strength and Pitch Measurements
in Achiral and Chiral Chromonic Liquid Crystals Using 90-Degree Twist Cells.”
Physical Review E, vol. 88, no. 6, 062513, American Physical Society (APS),
2014, doi:10.1103/physreve.88.062513.
short: C.K. McGinn, L.I. Laderman, N. Zimmermann, H.-S. Kitzerow, P.J. Collings,
Physical Review E 88 (2014).
date_created: 2023-01-24T18:30:12Z
date_updated: 2023-01-24T18:30:42Z
department:
- _id: '313'
- _id: '230'
- _id: '638'
doi: 10.1103/physreve.88.062513
intvolume: ' 88'
issue: '6'
keyword:
- Industrial and Manufacturing Engineering
- Metals and Alloys
- Strategy and Management
- Mechanical Engineering
language:
- iso: eng
publication: Physical Review E
publication_identifier:
issn:
- 1539-3755
- 1550-2376
publication_status: published
publisher: American Physical Society (APS)
status: public
title: Planar anchoring strength and pitch measurements in achiral and chiral chromonic
liquid crystals using 90-degree twist cells
type: journal_article
user_id: '254'
volume: 88
year: '2014'
...
---
_id: '31300'
article_number: '066205'
author:
- first_name: A.
full_name: Potzuweit, A.
last_name: Potzuweit
- first_name: Tobias
full_name: Weich, Tobias
id: '49178'
last_name: Weich
orcid: 0000-0002-9648-6919
- first_name: Sonja
full_name: Barkhofen, Sonja
id: '48188'
last_name: Barkhofen
- first_name: U.
full_name: Kuhl, U.
last_name: Kuhl
- first_name: H.-J.
full_name: Stöckmann, H.-J.
last_name: Stöckmann
- first_name: M.
full_name: Zworski, M.
last_name: Zworski
citation:
ama: 'Potzuweit A, Weich T, Barkhofen S, Kuhl U, Stöckmann H-J, Zworski M. Weyl
asymptotics: From closed to open systems. Physical Review E. 2012;86(6).
doi:10.1103/physreve.86.066205'
apa: 'Potzuweit, A., Weich, T., Barkhofen, S., Kuhl, U., Stöckmann, H.-J., &
Zworski, M. (2012). Weyl asymptotics: From closed to open systems. Physical
Review E, 86(6), Article 066205. https://doi.org/10.1103/physreve.86.066205'
bibtex: '@article{Potzuweit_Weich_Barkhofen_Kuhl_Stöckmann_Zworski_2012, title={Weyl
asymptotics: From closed to open systems}, volume={86}, DOI={10.1103/physreve.86.066205},
number={6066205}, journal={Physical Review E}, publisher={American Physical Society
(APS)}, author={Potzuweit, A. and Weich, Tobias and Barkhofen, Sonja and Kuhl,
U. and Stöckmann, H.-J. and Zworski, M.}, year={2012} }'
chicago: 'Potzuweit, A., Tobias Weich, Sonja Barkhofen, U. Kuhl, H.-J. Stöckmann,
and M. Zworski. “Weyl Asymptotics: From Closed to Open Systems.” Physical Review
E 86, no. 6 (2012). https://doi.org/10.1103/physreve.86.066205.'
ieee: 'A. Potzuweit, T. Weich, S. Barkhofen, U. Kuhl, H.-J. Stöckmann, and M. Zworski,
“Weyl asymptotics: From closed to open systems,” Physical Review E, vol.
86, no. 6, Art. no. 066205, 2012, doi: 10.1103/physreve.86.066205.'
mla: 'Potzuweit, A., et al. “Weyl Asymptotics: From Closed to Open Systems.” Physical
Review E, vol. 86, no. 6, 066205, American Physical Society (APS), 2012, doi:10.1103/physreve.86.066205.'
short: A. Potzuweit, T. Weich, S. Barkhofen, U. Kuhl, H.-J. Stöckmann, M. Zworski,
Physical Review E 86 (2012).
date_created: 2022-05-17T13:01:39Z
date_updated: 2022-05-19T10:18:57Z
department:
- _id: '10'
- _id: '623'
- _id: '548'
doi: 10.1103/physreve.86.066205
external_id:
arxiv:
- '1209.2304'
intvolume: ' 86'
issue: '6'
keyword:
- Industrial and Manufacturing Engineering
- Metals and Alloys
- Strategy and Management
- Mechanical Engineering
language:
- iso: eng
publication: Physical Review E
publication_identifier:
issn:
- 1539-3755
- 1550-2376
publication_status: published
publisher: American Physical Society (APS)
status: public
title: 'Weyl asymptotics: From closed to open systems'
type: journal_article
user_id: '49178'
volume: 86
year: '2012'
...