[{"year":"2023","issue":"7-10","title":"Luminescent DNA-origami nano-rods dispersed in a lyotropic chromonic liquid crystal","date_created":"2023-04-08T17:21:30Z","publisher":"Informa UK Limited","publication":"Liquid Crystals","language":[{"iso":"eng"}],"keyword":["Condensed Matter Physics","General Materials Science","General Chemistry"],"intvolume":" 50","page":"1243-1251","citation":{"ama":"Zhang B, Nguyen L, Martens K, et al. Luminescent DNA-origami nano-rods dispersed in a lyotropic chromonic liquid crystal. Liquid Crystals. 2023;50(7-10):1243-1251. doi:10.1080/02678292.2023.2188494","ieee":"B. Zhang et al., “Luminescent DNA-origami nano-rods dispersed in a lyotropic chromonic liquid crystal,” Liquid Crystals, vol. 50, no. 7–10, pp. 1243–1251, 2023, doi: 10.1080/02678292.2023.2188494.","chicago":"Zhang, Bingru, Linh Nguyen, Kevin Martens, Amelie Heuer-Jungemann, Julian Philipp, Susanne Kempter, Joachim O. Rädler, Tim Liedl, and Heinz-Siegfried Kitzerow. “Luminescent DNA-Origami Nano-Rods Dispersed in a Lyotropic Chromonic Liquid Crystal.” Liquid Crystals 50, no. 7–10 (2023): 1243–51. https://doi.org/10.1080/02678292.2023.2188494.","apa":"Zhang, B., Nguyen, L., Martens, K., Heuer-Jungemann, A., Philipp, J., Kempter, S., Rädler, J. O., Liedl, T., & Kitzerow, H.-S. (2023). Luminescent DNA-origami nano-rods dispersed in a lyotropic chromonic liquid crystal. Liquid Crystals, 50(7–10), 1243–1251. https://doi.org/10.1080/02678292.2023.2188494","short":"B. Zhang, L. Nguyen, K. Martens, A. Heuer-Jungemann, J. Philipp, S. Kempter, J.O. Rädler, T. Liedl, H.-S. Kitzerow, Liquid Crystals 50 (2023) 1243–1251.","mla":"Zhang, Bingru, et al. “Luminescent DNA-Origami Nano-Rods Dispersed in a Lyotropic Chromonic Liquid Crystal.” Liquid Crystals, vol. 50, no. 7–10, Informa UK Limited, 2023, pp. 1243–51, doi:10.1080/02678292.2023.2188494.","bibtex":"@article{Zhang_Nguyen_Martens_Heuer-Jungemann_Philipp_Kempter_Rädler_Liedl_Kitzerow_2023, title={Luminescent DNA-origami nano-rods dispersed in a lyotropic chromonic liquid crystal}, volume={50}, DOI={10.1080/02678292.2023.2188494}, number={7–10}, journal={Liquid Crystals}, publisher={Informa UK Limited}, author={Zhang, Bingru and Nguyen, Linh and Martens, Kevin and Heuer-Jungemann, Amelie and Philipp, Julian and Kempter, Susanne and Rädler, Joachim O. and Liedl, Tim and Kitzerow, Heinz-Siegfried}, year={2023}, pages={1243–1251} }"},"publication_identifier":{"issn":["0267-8292","1366-5855"]},"publication_status":"published","doi":"10.1080/02678292.2023.2188494","volume":50,"author":[{"full_name":"Zhang, Bingru","last_name":"Zhang","first_name":"Bingru"},{"full_name":"Nguyen, Linh","last_name":"Nguyen","first_name":"Linh"},{"first_name":"Kevin","last_name":"Martens","full_name":"Martens, Kevin"},{"last_name":"Heuer-Jungemann","full_name":"Heuer-Jungemann, Amelie","first_name":"Amelie"},{"last_name":"Philipp","full_name":"Philipp, Julian","first_name":"Julian"},{"first_name":"Susanne","full_name":"Kempter, Susanne","last_name":"Kempter"},{"last_name":"Rädler","full_name":"Rädler, Joachim O.","first_name":"Joachim O."},{"first_name":"Tim","last_name":"Liedl","full_name":"Liedl, Tim"},{"first_name":"Heinz-Siegfried","last_name":"Kitzerow","id":"254","full_name":"Kitzerow, Heinz-Siegfried"}],"date_updated":"2023-12-13T15:54:31Z","status":"public","type":"journal_article","department":[{"_id":"313"},{"_id":"230"}],"user_id":"254","_id":"43440"},{"status":"public","type":"journal_article","user_id":"67188","_id":"49676","intvolume":" 11","page":"12992-12998","citation":{"bibtex":"@article{Bauch_Dong_Schumacher_2023, title={Dynamics-induced charge transfer in semiconducting conjugated polymers}, volume={11}, DOI={10.1039/d3tc02263c}, number={38}, journal={Journal of Materials Chemistry C}, publisher={Royal Society of Chemistry (RSC)}, author={Bauch, Fabian and Dong, Chuan-Ding and Schumacher, Stefan}, year={2023}, pages={12992–12998} }","mla":"Bauch, Fabian, et al. “Dynamics-Induced Charge Transfer in Semiconducting Conjugated Polymers.” Journal of Materials Chemistry C, vol. 11, no. 38, Royal Society of Chemistry (RSC), 2023, pp. 12992–98, doi:10.1039/d3tc02263c.","short":"F. Bauch, C.-D. Dong, S. Schumacher, Journal of Materials Chemistry C 11 (2023) 12992–12998.","apa":"Bauch, F., Dong, C.-D., & Schumacher, S. (2023). Dynamics-induced charge transfer in semiconducting conjugated polymers. Journal of Materials Chemistry C, 11(38), 12992–12998. https://doi.org/10.1039/d3tc02263c","chicago":"Bauch, Fabian, Chuan-Ding Dong, and Stefan Schumacher. “Dynamics-Induced Charge Transfer in Semiconducting Conjugated Polymers.” Journal of Materials Chemistry C 11, no. 38 (2023): 12992–98. https://doi.org/10.1039/d3tc02263c.","ieee":"F. Bauch, C.-D. Dong, and S. Schumacher, “Dynamics-induced charge transfer in semiconducting conjugated polymers,” Journal of Materials Chemistry C, vol. 11, no. 38, pp. 12992–12998, 2023, doi: 10.1039/d3tc02263c.","ama":"Bauch F, Dong C-D, Schumacher S. Dynamics-induced charge transfer in semiconducting conjugated polymers. Journal of Materials Chemistry C. 2023;11(38):12992-12998. doi:10.1039/d3tc02263c"},"publication_identifier":{"issn":["2050-7526","2050-7534"]},"publication_status":"published","doi":"10.1039/d3tc02263c","volume":11,"author":[{"full_name":"Bauch, Fabian","last_name":"Bauch","first_name":"Fabian"},{"last_name":"Dong","full_name":"Dong, Chuan-Ding","first_name":"Chuan-Ding"},{"first_name":"Stefan","full_name":"Schumacher, Stefan","last_name":"Schumacher"}],"date_updated":"2023-12-15T11:54:46Z","abstract":[{"text":"Dynamics-induced interchain charge transfer in a polymer aggregate in stack configuration can be understood by single-oligomer polaron energy.","lang":"eng"}],"publication":"Journal of Materials Chemistry C","language":[{"iso":"eng"}],"keyword":["Materials Chemistry","General Chemistry"],"year":"2023","issue":"38","title":"Dynamics-induced charge transfer in semiconducting conjugated polymers","date_created":"2023-12-15T11:49:36Z","publisher":"Royal Society of Chemistry (RSC)"},{"doi":"10.37544/0720-5953-2023-11-12-60","title":"Defense-in-Depth als neues Paradigma der sicherheitsgerechten Produktentwicklung: interdisziplinäre, bedrohungsbewusste und lösungsorientierte Security","author":[{"last_name":"Gräßler","orcid":"0000-0001-5765-971X","id":"47565","full_name":"Gräßler, Iris","first_name":"Iris"},{"orcid":"0000-0003-3470-3647","last_name":"Bodden","full_name":"Bodden, Eric","id":"59256","first_name":"Eric"},{"first_name":"Dominik","full_name":"Wiechel, Dominik","id":"67161","last_name":"Wiechel"},{"orcid":"http://orcid.org/0000-0001-8778-2989","last_name":"Pottebaum","id":"405","full_name":"Pottebaum, Jens","first_name":"Jens"}],"date_created":"2023-11-16T08:23:12Z","volume":75,"date_updated":"2023-12-20T14:10:51Z","publisher":"VDI Fachmedien GmbH and Co. KG","citation":{"bibtex":"@article{Gräßler_Bodden_Wiechel_Pottebaum_2023, title={Defense-in-Depth als neues Paradigma der sicherheitsgerechten Produktentwicklung: interdisziplinäre, bedrohungsbewusste und lösungsorientierte Security}, volume={75}, DOI={10.37544/0720-5953-2023-11-12-60}, number={11–12}, journal={Konstruktion}, publisher={VDI Fachmedien GmbH and Co. KG}, author={Gräßler, Iris and Bodden, Eric and Wiechel, Dominik and Pottebaum, Jens}, year={2023}, pages={60–65} }","short":"I. Gräßler, E. Bodden, D. Wiechel, J. Pottebaum, Konstruktion 75 (2023) 60–65.","mla":"Gräßler, Iris, et al. “Defense-in-Depth als neues Paradigma der sicherheitsgerechten Produktentwicklung: interdisziplinäre, bedrohungsbewusste und lösungsorientierte Security.” Konstruktion, vol. 75, no. 11–12, VDI Fachmedien GmbH and Co. KG, 2023, pp. 60–65, doi:10.37544/0720-5953-2023-11-12-60.","apa":"Gräßler, I., Bodden, E., Wiechel, D., & Pottebaum, J. (2023). Defense-in-Depth als neues Paradigma der sicherheitsgerechten Produktentwicklung: interdisziplinäre, bedrohungsbewusste und lösungsorientierte Security. Konstruktion, 75(11–12), 60–65. https://doi.org/10.37544/0720-5953-2023-11-12-60","ama":"Gräßler I, Bodden E, Wiechel D, Pottebaum J. Defense-in-Depth als neues Paradigma der sicherheitsgerechten Produktentwicklung: interdisziplinäre, bedrohungsbewusste und lösungsorientierte Security. Konstruktion. 2023;75(11-12):60-65. doi:10.37544/0720-5953-2023-11-12-60","chicago":"Gräßler, Iris, Eric Bodden, Dominik Wiechel, and Jens Pottebaum. “Defense-in-Depth als neues Paradigma der sicherheitsgerechten Produktentwicklung: interdisziplinäre, bedrohungsbewusste und lösungsorientierte Security.” Konstruktion 75, no. 11–12 (2023): 60–65. https://doi.org/10.37544/0720-5953-2023-11-12-60.","ieee":"I. Gräßler, E. Bodden, D. Wiechel, and J. Pottebaum, “Defense-in-Depth als neues Paradigma der sicherheitsgerechten Produktentwicklung: interdisziplinäre, bedrohungsbewusste und lösungsorientierte Security,” Konstruktion, vol. 75, no. 11–12, pp. 60–65, 2023, doi: 10.37544/0720-5953-2023-11-12-60."},"page":"60-65","intvolume":" 75","year":"2023","issue":"11-12","publication_status":"published","publication_identifier":{"issn":["0720-5953"]},"quality_controlled":"1","language":[{"iso":"ger"}],"article_type":"original","keyword":["Mechanical Engineering","Mechanics of Materials","General Materials Science","Theoretical Computer Science"],"user_id":"405","department":[{"_id":"152"},{"_id":"76"}],"_id":"48946","status":"public","abstract":[{"lang":"ger","text":"inhalt Der verlässliche Betrieb von technischen Produkten wird zunehmend durch bewusste Angriffe bedroht. Vollständige Sicherheit ist dabei nicht möglich, durchschlagende Angriffe sind unvermeidbar (Assume Breach). Dies erfordert einen Paradigmenwechsel in der sicherheitsgerechten Entwicklung mechatronischer und cyber-physischer Systeme hin zu Defense-in-Depth. Systeme müssen so ausgelegt werden, dass sie auch bei gezielten Angriffen möglichst hohe Zuverlässigkeit und Sicherheit gewährleisten. Der hier beschriebene Lösungsansatz erweitert das Systemmodell um Angriffsszenarien und Verteidigungslinien. Diese werden am Beispiel eines industriellen Schließsystems zur Anlagensicherheit erläutert. Entwickler werden sensibilisiert, Angriffe systematisch zu berücksichtigen und interdisziplinär Verteidigungselemente gegenüber Bedrohungen und Angriffen zu spezifizieren."},{"text":"The reliable operation of technical products is increasingly threatened by deliberate attacks. Complete security is not possible, striking attacks are unavoidable (assume breach). This requires a paradigm shift in security-oriented engineering of mechatronic and cyber-physical systems towards Defense-in-Depth. Systems need to be engineered in a way that full reliability and security are ensured even in case of targeted attacks. The solution approach described here expands the system model to include attack scenarios and lines of defence. It is applied to an industrial locking system for plant security as an example. Developers are sensitised to systematically consider attacks and to specify interdisciplinary defence elements against threats and attacks.","lang":"eng"}],"type":"journal_article","publication":"Konstruktion"},{"language":[{"iso":"eng"}],"keyword":["Mechanical Engineering","Mechanics of Materials","Engineering (miscellaneous)","Chemical Engineering (miscellaneous)"],"article_number":"100181","department":[{"_id":"321"},{"_id":"302"}],"user_id":"54863","_id":"51167","status":"public","publication":"Journal of Advanced Joining Processes","type":"journal_article","doi":"10.1016/j.jajp.2023.100181","title":"Electropolymerization of acrylic acid on steel for enhanced joining by plastic deformation","volume":9,"author":[{"first_name":"B.","full_name":"Duderija, B.","last_name":"Duderija"},{"first_name":"F.","last_name":"Sahin","full_name":"Sahin, F."},{"last_name":"Meinderink","full_name":"Meinderink, D.","first_name":"D."},{"last_name":"Calderón-Gómez","full_name":"Calderón-Gómez, J.C.","first_name":"J.C."},{"first_name":"H.C.","full_name":"Schmidt, H.C.","last_name":"Schmidt"},{"first_name":"W.","last_name":"Homberg","full_name":"Homberg, W."},{"first_name":"G.","last_name":"Grundmeier","full_name":"Grundmeier, G."},{"first_name":"A.","last_name":"González-Orive","full_name":"González-Orive, A."}],"date_created":"2024-02-06T12:29:53Z","publisher":"Elsevier BV","date_updated":"2024-02-06T12:32:37Z","intvolume":" 9","citation":{"ama":"Duderija B, Sahin F, Meinderink D, et al. Electropolymerization of acrylic acid on steel for enhanced joining by plastic deformation. Journal of Advanced Joining Processes. 2023;9. doi:10.1016/j.jajp.2023.100181","ieee":"B. Duderija et al., “Electropolymerization of acrylic acid on steel for enhanced joining by plastic deformation,” Journal of Advanced Joining Processes, vol. 9, Art. no. 100181, 2023, doi: 10.1016/j.jajp.2023.100181.","chicago":"Duderija, B., F. Sahin, D. Meinderink, J.C. Calderón-Gómez, H.C. Schmidt, W. Homberg, G. Grundmeier, and A. González-Orive. “Electropolymerization of Acrylic Acid on Steel for Enhanced Joining by Plastic Deformation.” Journal of Advanced Joining Processes 9 (2023). https://doi.org/10.1016/j.jajp.2023.100181.","apa":"Duderija, B., Sahin, F., Meinderink, D., Calderón-Gómez, J. C., Schmidt, H. C., Homberg, W., Grundmeier, G., & González-Orive, A. (2023). Electropolymerization of acrylic acid on steel for enhanced joining by plastic deformation. Journal of Advanced Joining Processes, 9, Article 100181. https://doi.org/10.1016/j.jajp.2023.100181","short":"B. Duderija, F. Sahin, D. Meinderink, J.C. Calderón-Gómez, H.C. Schmidt, W. Homberg, G. Grundmeier, A. González-Orive, Journal of Advanced Joining Processes 9 (2023).","mla":"Duderija, B., et al. “Electropolymerization of Acrylic Acid on Steel for Enhanced Joining by Plastic Deformation.” Journal of Advanced Joining Processes, vol. 9, 100181, Elsevier BV, 2023, doi:10.1016/j.jajp.2023.100181.","bibtex":"@article{Duderija_Sahin_Meinderink_Calderón-Gómez_Schmidt_Homberg_Grundmeier_González-Orive_2023, title={Electropolymerization of acrylic acid on steel for enhanced joining by plastic deformation}, volume={9}, DOI={10.1016/j.jajp.2023.100181}, number={100181}, journal={Journal of Advanced Joining Processes}, publisher={Elsevier BV}, author={Duderija, B. and Sahin, F. and Meinderink, D. and Calderón-Gómez, J.C. and Schmidt, H.C. and Homberg, W. and Grundmeier, G. and González-Orive, A.}, year={2023} }"},"year":"2023","publication_identifier":{"issn":["2666-3309"]},"publication_status":"published"},{"keyword":["Materials Chemistry","General Chemistry"],"language":[{"iso":"eng"}],"_id":"51093","user_id":"61389","abstract":[{"text":"Dynamics-induced interchain charge transfer in a polymer aggregate in stack configuration can be understood by single-oligomer polaron energy.","lang":"eng"}],"status":"public","publication":"Journal of Materials Chemistry C","type":"journal_article","title":"Dynamics-induced charge transfer in semiconducting conjugated polymers","doi":"10.1039/d3tc02263c","date_updated":"2024-02-07T14:36:09Z","publisher":"Royal Society of Chemistry (RSC)","volume":11,"author":[{"id":"61389","full_name":"Bauch, Fabian","last_name":"Bauch","orcid":"0009-0008-6279-077X","first_name":"Fabian"},{"last_name":"Dong","id":"67188","full_name":"Dong, Chuan-Ding","first_name":"Chuan-Ding"},{"first_name":"Stefan","orcid":"0000-0003-4042-4951","last_name":"Schumacher","full_name":"Schumacher, Stefan","id":"27271"}],"date_created":"2024-01-31T12:07:22Z","year":"2023","page":"12992-12998","intvolume":" 11","citation":{"ama":"Bauch F, Dong C-D, Schumacher S. Dynamics-induced charge transfer in semiconducting conjugated polymers. Journal of Materials Chemistry C. 2023;11(38):12992-12998. doi:10.1039/d3tc02263c","ieee":"F. Bauch, C.-D. Dong, and S. Schumacher, “Dynamics-induced charge transfer in semiconducting conjugated polymers,” Journal of Materials Chemistry C, vol. 11, no. 38, pp. 12992–12998, 2023, doi: 10.1039/d3tc02263c.","chicago":"Bauch, Fabian, Chuan-Ding Dong, and Stefan Schumacher. “Dynamics-Induced Charge Transfer in Semiconducting Conjugated Polymers.” Journal of Materials Chemistry C 11, no. 38 (2023): 12992–98. https://doi.org/10.1039/d3tc02263c.","short":"F. Bauch, C.-D. Dong, S. Schumacher, Journal of Materials Chemistry C 11 (2023) 12992–12998.","bibtex":"@article{Bauch_Dong_Schumacher_2023, title={Dynamics-induced charge transfer in semiconducting conjugated polymers}, volume={11}, DOI={10.1039/d3tc02263c}, number={38}, journal={Journal of Materials Chemistry C}, publisher={Royal Society of Chemistry (RSC)}, author={Bauch, Fabian and Dong, Chuan-Ding and Schumacher, Stefan}, year={2023}, pages={12992–12998} }","mla":"Bauch, Fabian, et al. “Dynamics-Induced Charge Transfer in Semiconducting Conjugated Polymers.” Journal of Materials Chemistry C, vol. 11, no. 38, Royal Society of Chemistry (RSC), 2023, pp. 12992–98, doi:10.1039/d3tc02263c.","apa":"Bauch, F., Dong, C.-D., & Schumacher, S. (2023). Dynamics-induced charge transfer in semiconducting conjugated polymers. Journal of Materials Chemistry C, 11(38), 12992–12998. https://doi.org/10.1039/d3tc02263c"},"publication_identifier":{"issn":["2050-7526","2050-7534"]},"publication_status":"published","issue":"38"},{"publication_identifier":{"issn":["1022-1360","1521-3900"]},"publication_status":"published","intvolume":" 411","citation":{"ieee":"E. Moritzer and F. Hecker, “Adaptive Scaling of Components in the Fused Deposition Modeling Process,” Macromolecular Symposia, vol. 411, no. 1, 2023, doi: 10.1002/masy.202200181.","chicago":"Moritzer, Elmar, and Felix Hecker. “Adaptive Scaling of Components in the Fused Deposition Modeling Process.” Macromolecular Symposia 411, no. 1 (2023). https://doi.org/10.1002/masy.202200181.","ama":"Moritzer E, Hecker F. Adaptive Scaling of Components in the Fused Deposition Modeling Process. Macromolecular Symposia. 2023;411(1). doi:10.1002/masy.202200181","apa":"Moritzer, E., & Hecker, F. (2023). Adaptive Scaling of Components in the Fused Deposition Modeling Process. Macromolecular Symposia, 411(1). https://doi.org/10.1002/masy.202200181","bibtex":"@article{Moritzer_Hecker_2023, title={Adaptive Scaling of Components in the Fused Deposition Modeling Process}, volume={411}, DOI={10.1002/masy.202200181}, number={1}, journal={Macromolecular Symposia}, publisher={Wiley}, author={Moritzer, Elmar and Hecker, Felix}, year={2023} }","mla":"Moritzer, Elmar, and Felix Hecker. “Adaptive Scaling of Components in the Fused Deposition Modeling Process.” Macromolecular Symposia, vol. 411, no. 1, Wiley, 2023, doi:10.1002/masy.202200181.","short":"E. Moritzer, F. Hecker, Macromolecular Symposia 411 (2023)."},"date_updated":"2024-02-23T08:36:42Z","oa":"1","volume":411,"author":[{"last_name":"Moritzer","id":"20531","full_name":"Moritzer, Elmar","first_name":"Elmar"},{"first_name":"Felix","full_name":"Hecker, Felix","id":"45537","last_name":"Hecker"}],"doi":"10.1002/masy.202200181","conference":{"location":"Bukarest","end_date":"2022-11-26","start_date":"2022-11-13","name":"POLCOM 2022"},"main_file_link":[{"url":"https://doi.org/10.1002/masy.202200181","open_access":"1"}],"type":"journal_article","status":"public","_id":"48277","department":[{"_id":"9"},{"_id":"367"},{"_id":"321"},{"_id":"219"},{"_id":"624"}],"user_id":"45537","quality_controlled":"1","issue":"1","year":"2023","publisher":"Wiley","date_created":"2023-10-19T07:25:06Z","title":"Adaptive Scaling of Components in the Fused Deposition Modeling Process","publication":"Macromolecular Symposia","abstract":[{"text":"AbstractCurrently, the fused deposition modeling (FDM) process is the most common additive manufacturing technology. The principle of the FDM process is the strand wise deposition of molten thermoplastic polymers, by feeding a filament trough a heated nozzle. Due to the strand and layer wise deposition the cooling of the manufactured component is not uniform. This leads to dimensional deviations which may cause the component to be unusable for the desired application. In this paper, a method is described which is based on the shrinkage compensation through the adaption of every single raster line in components manufactured with the FDM process. The shrinkage compensation is based on a model resulting from a DOE which considers the main influencing factors on the shrinkage behavior of raster lines in the FDM process. An in‐house developed software analyzes the component and locally applies the shrinkage compensation with consideration of the boundary conditions, e.g., the position of the raster line in the component and the process parameters. Following, a validation using a simple geometry is conducted to show the effect of the presented adaptive scaling method.","lang":"eng"}],"keyword":["Materials Chemistry","Polymers and Plastics","Organic Chemistry","Condensed Matter Physics"],"language":[{"iso":"eng"}]},{"publication":"Journal of Manufacturing and Materials Processing","abstract":[{"text":"Multi-material designs (MMD) are more frequently used in the automotive industry. Hereby, the combination of different materials, metal sheets, or cast components, is mechanically joined, often by forming joining processes. The cast components mostly used are high-strength, age-hardenable aluminium alloys of the Al–Si system. Here, the low ductility of the AlSi alloys constitutes a challenge because their brittle nature causes cracks during the joining process. However, by using suitable solidification conditions, it is possible to achieve a microstructure with improved mechanical and joining properties. For this study, we used the twin-roll casting process (TRC) with water-cooled rollers to manufacture the hypoeutectic AlSi10Mg for the first time. Hereby, high solidification rates are realisable, which introduces a microstructure that is about four times finer than in the sand casting process. In particular, it is shown that a fine microstructure close to the modification with Na or Sr is achieved by the high solidification rate in the TRC process without using these elements. Based on this, the mechanical properties increase, and especially the ductility is enhanced. Subsequent joining investigations validate the positive influence of a high solidification rate since cracks in joints can be avoided. Finally, a microstructure-property-joint suitability correlation is presented.","lang":"eng"}],"language":[{"iso":"eng"}],"keyword":["Industrial and Manufacturing Engineering","Mechanical Engineering","Mechanics of Materials"],"issue":"4","quality_controlled":"1","year":"2023","date_created":"2024-03-08T16:09:27Z","publisher":"MDPI AG","title":"Mechanical and Microstructure Characterisation of the Hypoeutectic Cast Aluminium Alloy AlSi10Mg Manufactured by the Twin-Roll Casting Process","type":"journal_article","status":"public","department":[{"_id":"158"}],"user_id":"32340","_id":"52405","project":[{"name":"TRR 285 – A02: TRR 285 - Subproject A02","_id":"136"}],"article_number":"132","publication_identifier":{"issn":["2504-4494"]},"publication_status":"published","intvolume":" 7","citation":{"apa":"Neuser, M., Schaper, M., & Grydin, O. (2023). Mechanical and Microstructure Characterisation of the Hypoeutectic Cast Aluminium Alloy AlSi10Mg Manufactured by the Twin-Roll Casting Process. Journal of Manufacturing and Materials Processing, 7(4), Article 132. https://doi.org/10.3390/jmmp7040132","mla":"Neuser, Moritz, et al. “Mechanical and Microstructure Characterisation of the Hypoeutectic Cast Aluminium Alloy AlSi10Mg Manufactured by the Twin-Roll Casting Process.” Journal of Manufacturing and Materials Processing, vol. 7, no. 4, 132, MDPI AG, 2023, doi:10.3390/jmmp7040132.","short":"M. Neuser, M. Schaper, O. Grydin, Journal of Manufacturing and Materials Processing 7 (2023).","bibtex":"@article{Neuser_Schaper_Grydin_2023, title={Mechanical and Microstructure Characterisation of the Hypoeutectic Cast Aluminium Alloy AlSi10Mg Manufactured by the Twin-Roll Casting Process}, volume={7}, DOI={10.3390/jmmp7040132}, number={4132}, journal={Journal of Manufacturing and Materials Processing}, publisher={MDPI AG}, author={Neuser, Moritz and Schaper, Mirko and Grydin, Olexandr}, year={2023} }","chicago":"Neuser, Moritz, Mirko Schaper, and Olexandr Grydin. “Mechanical and Microstructure Characterisation of the Hypoeutectic Cast Aluminium Alloy AlSi10Mg Manufactured by the Twin-Roll Casting Process.” Journal of Manufacturing and Materials Processing 7, no. 4 (2023). https://doi.org/10.3390/jmmp7040132.","ieee":"M. Neuser, M. Schaper, and O. Grydin, “Mechanical and Microstructure Characterisation of the Hypoeutectic Cast Aluminium Alloy AlSi10Mg Manufactured by the Twin-Roll Casting Process,” Journal of Manufacturing and Materials Processing, vol. 7, no. 4, Art. no. 132, 2023, doi: 10.3390/jmmp7040132.","ama":"Neuser M, Schaper M, Grydin O. Mechanical and Microstructure Characterisation of the Hypoeutectic Cast Aluminium Alloy AlSi10Mg Manufactured by the Twin-Roll Casting Process. Journal of Manufacturing and Materials Processing. 2023;7(4). doi:10.3390/jmmp7040132"},"volume":7,"author":[{"first_name":"Moritz","full_name":"Neuser, Moritz","id":"32340","last_name":"Neuser"},{"last_name":"Schaper","full_name":"Schaper, Mirko","id":"43720","first_name":"Mirko"},{"id":"43822","full_name":"Grydin, Olexandr","last_name":"Grydin","first_name":"Olexandr"}],"date_updated":"2024-03-14T15:21:38Z","doi":"10.3390/jmmp7040132"},{"doi":"10.3390/jmmp7050169","date_updated":"2024-03-14T15:22:06Z","author":[{"first_name":"Thomas","last_name":"Borgert","full_name":"Borgert, Thomas","id":"83141"},{"last_name":"Neuser","id":"32340","full_name":"Neuser, Moritz","first_name":"Moritz"},{"first_name":"Kay-Peter","last_name":"Hoyer","full_name":"Hoyer, Kay-Peter","id":"48411"},{"full_name":"Homberg, Werner","id":"233","last_name":"Homberg","first_name":"Werner"},{"last_name":"Schaper","full_name":"Schaper, Mirko","id":"43720","first_name":"Mirko"}],"volume":7,"citation":{"mla":"Borgert, Thomas, et al. “Thermomechanical Joining of Hypoeutectic Aluminium Cast Plates.” Journal of Manufacturing and Materials Processing, vol. 7, no. 5, 169, MDPI AG, 2023, doi:10.3390/jmmp7050169.","short":"T. Borgert, M. Neuser, K.-P. Hoyer, W. Homberg, M. Schaper, Journal of Manufacturing and Materials Processing 7 (2023).","bibtex":"@article{Borgert_Neuser_Hoyer_Homberg_Schaper_2023, title={Thermomechanical Joining of Hypoeutectic Aluminium Cast Plates}, volume={7}, DOI={10.3390/jmmp7050169}, number={5169}, journal={Journal of Manufacturing and Materials Processing}, publisher={MDPI AG}, author={Borgert, Thomas and Neuser, Moritz and Hoyer, Kay-Peter and Homberg, Werner and Schaper, Mirko}, year={2023} }","apa":"Borgert, T., Neuser, M., Hoyer, K.-P., Homberg, W., & Schaper, M. (2023). Thermomechanical Joining of Hypoeutectic Aluminium Cast Plates. Journal of Manufacturing and Materials Processing, 7(5), Article 169. https://doi.org/10.3390/jmmp7050169","chicago":"Borgert, Thomas, Moritz Neuser, Kay-Peter Hoyer, Werner Homberg, and Mirko Schaper. “Thermomechanical Joining of Hypoeutectic Aluminium Cast Plates.” Journal of Manufacturing and Materials Processing 7, no. 5 (2023). https://doi.org/10.3390/jmmp7050169.","ieee":"T. Borgert, M. Neuser, K.-P. Hoyer, W. Homberg, and M. Schaper, “Thermomechanical Joining of Hypoeutectic Aluminium Cast Plates,” Journal of Manufacturing and Materials Processing, vol. 7, no. 5, Art. no. 169, 2023, doi: 10.3390/jmmp7050169.","ama":"Borgert T, Neuser M, Hoyer K-P, Homberg W, Schaper M. Thermomechanical Joining of Hypoeutectic Aluminium Cast Plates. Journal of Manufacturing and Materials Processing. 2023;7(5). doi:10.3390/jmmp7050169"},"intvolume":" 7","publication_status":"published","publication_identifier":{"issn":["2504-4494"]},"article_number":"169","article_type":"original","project":[{"_id":"147","name":"TRR 285 – C03: TRR 285 - Subproject C03"},{"_id":"136","name":"TRR 285 – A02: TRR 285 - Subproject A02"}],"_id":"47535","user_id":"32340","department":[{"_id":"156"},{"_id":"158"}],"status":"public","type":"journal_article","title":"Thermomechanical Joining of Hypoeutectic Aluminium Cast Plates","publisher":"MDPI AG","date_created":"2023-10-02T06:46:53Z","year":"2023","quality_controlled":"1","issue":"5","keyword":["Industrial and Manufacturing Engineering","Mechanical Engineering","Mechanics of Materials"],"language":[{"iso":"eng"}],"abstract":[{"text":"Consistent lightweight construction in the area of vehicle manufacturing requires the increased use of multi-material combinations. This, in turn, requires an adaptation of standard joining techniques. In multi-material combinations, the importance of integral cast components, in particular, is increasing and poses additional technical challenges for the industry. One approach to solve these challenges is adaptable joining elements manufactured by a thermomechanical forming process. By applying an incremental and thermomechanical joining process, it is possible to react immediately and adapt the joining process inline to reduce the number of different joining elements. In the investigation described in this publication, cast plates made of the cast aluminium alloy EN AC-AlSi9 serve as joining partners, which are processed by sand casting. The joining process of hypoeutectic AlSi alloys is challenging as their brittle character leads to cracks in the joint during conventional mechanical joining. To solve this, the frictional heat of the novel joining process applied can provide a finer microstructure in the hypoeutectic AlSi9 cast alloy. In detail, its Si is finer-grained, resulting in higher ductility of the joint. This study reveals the thermomechanical joining suitability of a hypoeutectic cast aluminium alloy in combination with adaptively manufactured auxiliary joining elements.","lang":"eng"}],"publication":"Journal of Manufacturing and Materials Processing"},{"abstract":[{"text":"AbstractIn Konstruktionen des Landmaschinenbaus aus dickeren Blechen (ca. 3–10 mm) findet die Klebtechnik bislang nur wenig Anwendung, obwohl sie in anderen Einsatzgebieten bereits ein etabliertes Fügeverfahren darstellt und viele Vorteile gegenüber anderen Fügeverfahren bietet, da es bisher an Regelwerken bei der Auslegung derartiger Verbindungen fehlt. Ein wesentliches Kriterium bei der Auslegung von Verbindungen im Landmaschinenbau ist die Ermüdungsfestigkeit aufgrund der langen Nutzungsphase der Produkte und der in der Landtechnik vorherrschenden Belastungscharakteristika. Geklebte Verbindungen weisen ein hervorragendes Verhalten bei zyklischer Belastung auf. Die steigenden Anforderungen im Hinblick auf Ressourceneffizienz und Leichtbau führen zu einem Umdenken, da durch den vermehrten Einsatz höherfester Stahlwerkstoffe in Kombination mit der Klebtechnik dieses als umsetzbar erscheint. Ziel ist die Entwicklung einer Methode zur Auslegung geklebter Verbindungen in Konstruktionen mit höherfesten Stahlwerkstoffen in Anlehnung an die FKM‐Richtlinie. Die betriebsrelevanten Beanspruchungen der Landtechnik werden analysiert und an speziellen Probekörpern untersucht. Dabei werden sowohl die mechanischen, thermischen und medialen Einflussfaktoren als auch der Einfluss der Klebfugengeometrie und von Betriebslastenkollektiven untersucht. Die Erkenntnisse werden in einer KMU‐relevanten Vorgehensweise zur Ermittlung von Abminderungsfaktoren zusammengefasst, wodurch die Auslegung der Bauteilfestigkeit sowohl statisch als auch dynamisch möglich ist.","lang":"eng"}],"publication":"Stahlbau","language":[{"iso":"ger"}],"keyword":["Metals and Alloys","Mechanical Engineering","Mechanics of Materials","Building and Construction","Civil and Structural Engineering"],"year":"2023","issue":"8","title":"Auslegungsmethode zum Kleben höchstfester Stahlwerkstoffe im Landmaschinenbau","date_created":"2023-09-14T06:03:48Z","publisher":"Wiley","status":"public","type":"journal_article","user_id":"41235","department":[{"_id":"157"}],"_id":"47042","citation":{"apa":"Göddecke, J., Göhrs, T., Meschut, G., & Große Gehling, M. (2023). Auslegungsmethode zum Kleben höchstfester Stahlwerkstoffe im Landmaschinenbau. Stahlbau, 92(8), 508–519. https://doi.org/10.1002/stab.202300031","mla":"Göddecke, Johannes, et al. “Auslegungsmethode zum Kleben höchstfester Stahlwerkstoffe im Landmaschinenbau.” Stahlbau, vol. 92, no. 8, Wiley, 2023, pp. 508–19, doi:10.1002/stab.202300031.","bibtex":"@article{Göddecke_Göhrs_Meschut_Große Gehling_2023, title={Auslegungsmethode zum Kleben höchstfester Stahlwerkstoffe im Landmaschinenbau}, volume={92}, DOI={10.1002/stab.202300031}, number={8}, journal={Stahlbau}, publisher={Wiley}, author={Göddecke, Johannes and Göhrs, Tim and Meschut, Gerson and Große Gehling, Manfred}, year={2023}, pages={508–519} }","short":"J. Göddecke, T. Göhrs, G. Meschut, M. Große Gehling, Stahlbau 92 (2023) 508–519.","chicago":"Göddecke, Johannes, Tim Göhrs, Gerson Meschut, and Manfred Große Gehling. “Auslegungsmethode zum Kleben höchstfester Stahlwerkstoffe im Landmaschinenbau.” Stahlbau 92, no. 8 (2023): 508–19. https://doi.org/10.1002/stab.202300031.","ieee":"J. Göddecke, T. Göhrs, G. Meschut, and M. Große Gehling, “Auslegungsmethode zum Kleben höchstfester Stahlwerkstoffe im Landmaschinenbau,” Stahlbau, vol. 92, no. 8, pp. 508–519, 2023, doi: 10.1002/stab.202300031.","ama":"Göddecke J, Göhrs T, Meschut G, Große Gehling M. Auslegungsmethode zum Kleben höchstfester Stahlwerkstoffe im Landmaschinenbau. Stahlbau. 2023;92(8):508-519. doi:10.1002/stab.202300031"},"intvolume":" 92","page":"508-519","publication_status":"published","publication_identifier":{"issn":["0038-9145","1437-1049"]},"doi":"10.1002/stab.202300031","author":[{"last_name":"Göddecke","full_name":"Göddecke, Johannes","id":"59070","first_name":"Johannes"},{"last_name":"Göhrs","full_name":"Göhrs, Tim","first_name":"Tim"},{"first_name":"Gerson","last_name":"Meschut","orcid":"0000-0002-2763-1246","id":"32056","full_name":"Meschut, Gerson"},{"first_name":"Manfred","full_name":"Große Gehling, Manfred","last_name":"Große Gehling"}],"volume":92,"date_updated":"2024-03-19T06:06:45Z"},{"publication_status":"published","quality_controlled":"1","publication_identifier":{"issn":["0724-3472"]},"issue":"4-5","year":"2023","citation":{"apa":"Wingertszahn, P., Schmitt, S., Thielen, S., Oehler, M., Magyar, B., Koch, O., Hasse, H., & Stephan, S. (2023). Measurement, Modelling, and Appli cation of Lubricant Properties at Extreme Pressures. Tribologie Und Schmierungstechnik, 70(4–5), 5–12. https://doi.org/10.24053/tus-2023-0017","short":"P. Wingertszahn, S. Schmitt, S. Thielen, M. Oehler, B. Magyar, O. Koch, H. Hasse, S. Stephan, Tribologie Und Schmierungstechnik 70 (2023) 5–12.","bibtex":"@article{Wingertszahn_Schmitt_Thielen_Oehler_Magyar_Koch_Hasse_Stephan_2023, title={Measurement, Modelling, and Appli cation of Lubricant Properties at Extreme Pressures}, volume={70}, DOI={10.24053/tus-2023-0017}, number={4–5}, journal={Tribologie und Schmierungstechnik}, publisher={Narr Francke Attempto Verlag GmbH + Co. KG}, author={Wingertszahn, Patrick and Schmitt, Sebastian and Thielen, Stefan and Oehler, Manuel and Magyar, Balázs and Koch, Oliver and Hasse, Hans and Stephan, Simon}, year={2023}, pages={5–12} }","mla":"Wingertszahn, Patrick, et al. “Measurement, Modelling, and Appli Cation of Lubricant Properties at Extreme Pressures.” Tribologie Und Schmierungstechnik, vol. 70, no. 4–5, Narr Francke Attempto Verlag GmbH + Co. KG, 2023, pp. 5–12, doi:10.24053/tus-2023-0017.","chicago":"Wingertszahn, Patrick, Sebastian Schmitt, Stefan Thielen, Manuel Oehler, Balázs Magyar, Oliver Koch, Hans Hasse, and Simon Stephan. “Measurement, Modelling, and Appli Cation of Lubricant Properties at Extreme Pressures.” Tribologie Und Schmierungstechnik 70, no. 4–5 (2023): 5–12. https://doi.org/10.24053/tus-2023-0017.","ieee":"P. Wingertszahn et al., “Measurement, Modelling, and Appli cation of Lubricant Properties at Extreme Pressures,” Tribologie und Schmierungstechnik, vol. 70, no. 4–5, pp. 5–12, 2023, doi: 10.24053/tus-2023-0017.","ama":"Wingertszahn P, Schmitt S, Thielen S, et al. Measurement, Modelling, and Appli cation of Lubricant Properties at Extreme Pressures. Tribologie und Schmierungstechnik. 2023;70(4-5):5-12. doi:10.24053/tus-2023-0017"},"intvolume":" 70","page":"5-12","publisher":"Narr Francke Attempto Verlag GmbH + Co. KG","date_updated":"2024-03-20T08:39:44Z","author":[{"last_name":"Wingertszahn","full_name":"Wingertszahn, Patrick","first_name":"Patrick"},{"last_name":"Schmitt","full_name":"Schmitt, Sebastian","first_name":"Sebastian"},{"full_name":"Thielen, Stefan","last_name":"Thielen","first_name":"Stefan"},{"full_name":"Oehler, Manuel","last_name":"Oehler","first_name":"Manuel"},{"last_name":"Magyar","full_name":"Magyar, Balázs","id":"97759","first_name":"Balázs"},{"full_name":"Koch, Oliver","last_name":"Koch","first_name":"Oliver"},{"full_name":"Hasse, Hans","last_name":"Hasse","first_name":"Hans"},{"full_name":"Stephan, Simon","last_name":"Stephan","first_name":"Simon"}],"date_created":"2024-03-20T08:38:12Z","volume":70,"title":"Measurement, Modelling, and Appli cation of Lubricant Properties at Extreme Pressures","doi":"10.24053/tus-2023-0017","type":"journal_article","publication":"Tribologie und Schmierungstechnik","abstract":[{"lang":"eng","text":"Lubricants play a central role in many technical applications, e.g. in bearings and gears as well as in machining processes. In such applications, lubricants are exposed to extreme conditions in the contact area. In lubrication gaps, the pressure can reach values up to 5 GPa. The thermophysical properties of lubricants, and in particular the viscosity, at such extreme conditions have an important influence on the friction and wear behavior of a tribosystem. Accordingly, reliable lubricant property models are a prerequisite for accurate tribological simulations, e.g. elastohydrodynamic lubrication (EHL) simulations. Presently, the vast majority of experimental thermophysical property data are only available up to 1 GPa. Thus, reliable and robust models with strong extrapolation capabilities to higher pressure are required. In this work, viscosity measurements of squalane in a temperature range be tween 20 °C and 100 °C and pressures up to 1 GPa were carried out. Based on that data, a physical model for the viscosity was developed. The model is built by combining a molecular-based equation of state with the so-called entropy scaling approach. Finally, we demonstrate how this fluid property model can be favorably integrated in an EHL simulation by an application programming interface (API). The novel hybrid modeling approach is promising for future applications."}],"status":"public","_id":"52657","user_id":"97759","department":[{"_id":"146"},{"_id":"9"}],"keyword":["Surfaces","Coatings and Films","Surfaces and Interfaces","Mechanical Engineering","Mechanics of Materials"],"language":[{"iso":"eng"}]},{"status":"public","abstract":[{"text":"AbstractCurrently, the fused deposition modeling (FDM) process is the most common additive manufacturing technology. The principle of the FDM process is the strand wise deposition of molten thermoplastic polymers, by feeding a filament trough a heated nozzle. Due to the strand and layer wise deposition the cooling of the manufactured component is not uniform. This leads to dimensional deviations which may cause the component to be unusable for the desired application. In this paper, a method is described which is based on the shrinkage compensation through the adaption of every single raster line in components manufactured with the FDM process. The shrinkage compensation is based on a model resulting from a DOE which considers the main influencing factors on the shrinkage behavior of raster lines in the FDM process. An in‐house developed software analyzes the component and locally applies the shrinkage compensation with consideration of the boundary conditions, e.g., the position of the raster line in the component and the process parameters. Following, a validation using a simple geometry is conducted to show the effect of the presented adaptive scaling method.","lang":"eng"}],"publication":"Macromolecular Symposia","type":"journal_article","language":[{"iso":"eng"}],"keyword":["Materials Chemistry","Polymers and Plastics","Organic Chemistry","Condensed Matter Physics"],"department":[{"_id":"9"},{"_id":"367"},{"_id":"321"}],"user_id":"44116","_id":"52802","intvolume":" 411","citation":{"chicago":"Moritzer, Elmar, and Felix Hecker. “Adaptive Scaling of Components in the Fused Deposition Modeling Process.” Macromolecular Symposia 411, no. 1 (2023). https://doi.org/10.1002/masy.202200181.","ieee":"E. Moritzer and F. Hecker, “Adaptive Scaling of Components in the Fused Deposition Modeling Process,” Macromolecular Symposia, vol. 411, no. 1, 2023, doi: 10.1002/masy.202200181.","ama":"Moritzer E, Hecker F. Adaptive Scaling of Components in the Fused Deposition Modeling Process. Macromolecular Symposia. 2023;411(1). doi:10.1002/masy.202200181","mla":"Moritzer, Elmar, and Felix Hecker. “Adaptive Scaling of Components in the Fused Deposition Modeling Process.” Macromolecular Symposia, vol. 411, no. 1, Wiley, 2023, doi:10.1002/masy.202200181.","bibtex":"@article{Moritzer_Hecker_2023, title={Adaptive Scaling of Components in the Fused Deposition Modeling Process}, volume={411}, DOI={10.1002/masy.202200181}, number={1}, journal={Macromolecular Symposia}, publisher={Wiley}, author={Moritzer, Elmar and Hecker, Felix}, year={2023} }","short":"E. Moritzer, F. Hecker, Macromolecular Symposia 411 (2023).","apa":"Moritzer, E., & Hecker, F. (2023). Adaptive Scaling of Components in the Fused Deposition Modeling Process. Macromolecular Symposia, 411(1). https://doi.org/10.1002/masy.202200181"},"year":"2023","issue":"1","quality_controlled":"1","publication_identifier":{"issn":["1022-1360","1521-3900"]},"publication_status":"published","doi":"10.1002/masy.202200181","title":"Adaptive Scaling of Components in the Fused Deposition Modeling Process","volume":411,"author":[{"full_name":"Moritzer, Elmar","id":"20531","last_name":"Moritzer","first_name":"Elmar"},{"id":"45537","full_name":"Hecker, Felix","last_name":"Hecker","first_name":"Felix"}],"date_created":"2024-03-25T09:16:46Z","publisher":"Wiley","date_updated":"2024-03-25T09:17:03Z"},{"quality_controlled":"1","year":"2023","date_created":"2024-02-07T13:59:25Z","title":"Assessing the Impact of the Powder Production Method on Ceramic-filled Polyamide Composites made by Laser Sintering","publication":"Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium","abstract":[{"lang":"eng","text":"Polymer composites represent the industry standard in injection molding for the production of plastic components with increased requirements in terms of heat resistance and stiffness. In the field of laser sintering (LS), these materials are less common so far. In order to extend the available material variety for the LS process, new ceramic-filled Polyamide 613 powders are investigated within the scope of this work. Here, the resulting properties from two different powder production methods are compared. One filled powder is produced by dry blending and the other powder with the same filler and filling ratio is produced by encapsulating the filler particles inside the polymer particles within the dissolution-precipitation process. It was found that encapsulating the filler particles can provide certain benefits for the processability, for example an improved powder flowability or better filler dispersion. However, encapsulating the filler also alters the thermal properties of the precipitated powder. "}],"language":[{"iso":"eng"}],"keyword":["Additive Manufacturing","Laser Sintering","Filled Materials","Composites","Polyamide 613"],"publication_status":"published","citation":{"chicago":"Kletetzka, Ivo, Fabian Neitzel, and Hans-Joachim Schmid. “Assessing the Impact of the Powder Production Method on Ceramic-Filled Polyamide Composites Made by Laser Sintering.” In Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, edited by Joseph Beaman. Laboratory for Freeform Fabrication and University of Texas, Austin, 2023. https://doi.org/10.26153/tsw/50931.","ieee":"I. Kletetzka, F. Neitzel, and H.-J. Schmid, “Assessing the Impact of the Powder Production Method on Ceramic-filled Polyamide Composites made by Laser Sintering,” in Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, Austin, 2023, doi: https://doi.org/10.26153/tsw/50931.","ama":"Kletetzka I, Neitzel F, Schmid H-J. Assessing the Impact of the Powder Production Method on Ceramic-filled Polyamide Composites made by Laser Sintering. In: Beaman J, ed. Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium. ; 2023. doi:https://doi.org/10.26153/tsw/50931","apa":"Kletetzka, I., Neitzel, F., & Schmid, H.-J. (2023). Assessing the Impact of the Powder Production Method on Ceramic-filled Polyamide Composites made by Laser Sintering. In J. Beaman (Ed.), Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium. https://doi.org/10.26153/tsw/50931","short":"I. Kletetzka, F. Neitzel, H.-J. Schmid, in: J. Beaman (Ed.), Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, Laboratory for Freeform Fabrication and University of Texas, Austin, 2023.","mla":"Kletetzka, Ivo, et al. “Assessing the Impact of the Powder Production Method on Ceramic-Filled Polyamide Composites Made by Laser Sintering.” Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, edited by Joseph Beaman, 2023, doi:https://doi.org/10.26153/tsw/50931.","bibtex":"@inproceedings{Kletetzka_Neitzel_Schmid_2023, place={Laboratory for Freeform Fabrication and University of Texas, Austin}, title={Assessing the Impact of the Powder Production Method on Ceramic-filled Polyamide Composites made by Laser Sintering}, DOI={https://doi.org/10.26153/tsw/50931}, booktitle={Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium}, author={Kletetzka, Ivo and Neitzel, Fabian and Schmid, Hans-Joachim}, editor={Beaman, Joseph}, year={2023} }"},"place":"Laboratory for Freeform Fabrication and University of Texas, Austin","author":[{"id":"50769","full_name":"Kletetzka, Ivo","last_name":"Kletetzka","first_name":"Ivo"},{"first_name":"Fabian","orcid":"0009-0004-8412-3645 ","last_name":"Neitzel","id":"72307","full_name":"Neitzel, Fabian"},{"first_name":"Hans-Joachim","id":"464","full_name":"Schmid, Hans-Joachim","last_name":"Schmid","orcid":"000-0001-8590-1921"}],"date_updated":"2024-04-02T12:46:08Z","oa":"1","conference":{"start_date":"2023-08-14","name":"34th Annual International Solid Freeform Fabrication Symposium","location":"Austin","end_date":"2023-08-16"},"doi":"https://doi.org/10.26153/tsw/50931","main_file_link":[{"url":"https://www.sffsymposium.org/","open_access":"1"}],"type":"conference","status":"public","editor":[{"first_name":"Joseph","last_name":"Beaman","full_name":"Beaman, Joseph"}],"department":[{"_id":"150"},{"_id":"219"},{"_id":"624"},{"_id":"9"}],"user_id":"50769","_id":"51218"},{"year":"2023","issue":"8","title":"Antimicrobial Brushes on Titanium via “Grafting to” Using Phosphonic Acid/Pyridinium Containing Block Copolymers","publisher":"Wiley","date_created":"2024-04-03T11:08:51Z","abstract":[{"lang":"eng","text":"AbstractCoating medical implants with antibacterial polymers may prevent postoperative infections which are a common issue for conventional titanium implants and can even lead to implant failure. Easily applicable diblock copolymers are presented that form polymer brushes via “grafting to” mechanism on titanium and equip the modified material with antibacterial properties. The polymers carry quaternized pyridinium units to combat bacteria and phosphonic acid groups which allow the linear chains to be anchored to metal surfaces in a convenient coating process. The polymers are synthesized via reversible‐addition‐fragmentation‐chain‐transfer (RAFT) polymerization and postmodifications and are characterized using NMR spectroscopy and SEC. Low grafting densities are a major drawback of the “grafting to” approach compared to “grafting from”. Thus, the number of phosphonic acid groups in the anchor block are varied to investigate and optimize the surface binding. Modified titanium surfaces are examined regarding their composition, wetting behavior, streaming potential, and coating stability. Evaluation of the antimicrobial properties revealed reduced bacterial adhesion and biofilm formation for certain polymers, albeit the cell biocompatibility against human gingival fibroblasts is also impaired. The presented findings show the potential of easy‐to‐apply polymer coatings and aid in designing next‐generation implant surface modifications."}],"publication":"Macromolecular Materials and Engineering","keyword":["Materials Chemistry","Polymers and Plastics","Organic Chemistry","General Chemical Engineering"],"language":[{"iso":"eng"}],"citation":{"ama":"Methling R, Dückmann O, Simon F, Wolf‐Brandstetter C, Kuckling D. Antimicrobial Brushes on Titanium via “Grafting to” Using Phosphonic Acid/Pyridinium Containing Block Copolymers. Macromolecular Materials and Engineering. 2023;308(8). doi:10.1002/mame.202200665","chicago":"Methling, Rafael, Oliver Dückmann, Frank Simon, Cornelia Wolf‐Brandstetter, and Dirk Kuckling. “Antimicrobial Brushes on Titanium via ‘Grafting to’ Using Phosphonic Acid/Pyridinium Containing Block Copolymers.” Macromolecular Materials and Engineering 308, no. 8 (2023). https://doi.org/10.1002/mame.202200665.","ieee":"R. Methling, O. Dückmann, F. Simon, C. Wolf‐Brandstetter, and D. Kuckling, “Antimicrobial Brushes on Titanium via ‘Grafting to’ Using Phosphonic Acid/Pyridinium Containing Block Copolymers,” Macromolecular Materials and Engineering, vol. 308, no. 8, 2023, doi: 10.1002/mame.202200665.","bibtex":"@article{Methling_Dückmann_Simon_Wolf‐Brandstetter_Kuckling_2023, title={Antimicrobial Brushes on Titanium via “Grafting to” Using Phosphonic Acid/Pyridinium Containing Block Copolymers}, volume={308}, DOI={10.1002/mame.202200665}, number={8}, journal={Macromolecular Materials and Engineering}, publisher={Wiley}, author={Methling, Rafael and Dückmann, Oliver and Simon, Frank and Wolf‐Brandstetter, Cornelia and Kuckling, Dirk}, year={2023} }","short":"R. Methling, O. Dückmann, F. Simon, C. Wolf‐Brandstetter, D. Kuckling, Macromolecular Materials and Engineering 308 (2023).","mla":"Methling, Rafael, et al. “Antimicrobial Brushes on Titanium via ‘Grafting to’ Using Phosphonic Acid/Pyridinium Containing Block Copolymers.” Macromolecular Materials and Engineering, vol. 308, no. 8, Wiley, 2023, doi:10.1002/mame.202200665.","apa":"Methling, R., Dückmann, O., Simon, F., Wolf‐Brandstetter, C., & Kuckling, D. (2023). Antimicrobial Brushes on Titanium via “Grafting to” Using Phosphonic Acid/Pyridinium Containing Block Copolymers. Macromolecular Materials and Engineering, 308(8). https://doi.org/10.1002/mame.202200665"},"intvolume":" 308","publication_status":"published","publication_identifier":{"issn":["1438-7492","1439-2054"]},"doi":"10.1002/mame.202200665","date_updated":"2024-04-03T11:10:05Z","author":[{"first_name":"Rafael","last_name":"Methling","full_name":"Methling, Rafael"},{"last_name":"Dückmann","full_name":"Dückmann, Oliver","first_name":"Oliver"},{"last_name":"Simon","full_name":"Simon, Frank","first_name":"Frank"},{"first_name":"Cornelia","full_name":"Wolf‐Brandstetter, Cornelia","last_name":"Wolf‐Brandstetter"},{"last_name":"Kuckling","full_name":"Kuckling, Dirk","id":"287","first_name":"Dirk"}],"volume":308,"status":"public","type":"journal_article","article_type":"original","_id":"53170","user_id":"94","department":[{"_id":"163"}]},{"keyword":["General Engineering","General Materials Science","General Computer Science","Electrical and Electronic Engineering"],"language":[{"iso":"eng"}],"_id":"53263","department":[{"_id":"263"}],"user_id":"67076","status":"public","publication":"IEEE Access","type":"journal_article","title":"Spectral and Energy Efficiency Maximization of MISO STAR-RIS-Assisted URLLC Systems","doi":"10.1109/access.2023.3294092","publisher":"Institute of Electrical and Electronics Engineers (IEEE)","date_updated":"2024-04-05T13:21:01Z","volume":11,"date_created":"2024-04-05T09:01:49Z","author":[{"first_name":"Mohammad","last_name":"Soleymani","full_name":"Soleymani, Mohammad"},{"first_name":"Ignacio","full_name":"Santamaria, Ignacio","last_name":"Santamaria"},{"first_name":"Eduard A.","last_name":"Jorswieck","full_name":"Jorswieck, Eduard A."}],"year":"2023","intvolume":" 11","page":"70833-70852","citation":{"ieee":"M. Soleymani, I. Santamaria, and E. A. Jorswieck, “Spectral and Energy Efficiency Maximization of MISO STAR-RIS-Assisted URLLC Systems,” IEEE Access, vol. 11, pp. 70833–70852, 2023, doi: 10.1109/access.2023.3294092.","chicago":"Soleymani, Mohammad, Ignacio Santamaria, and Eduard A. Jorswieck. “Spectral and Energy Efficiency Maximization of MISO STAR-RIS-Assisted URLLC Systems.” IEEE Access 11 (2023): 70833–52. https://doi.org/10.1109/access.2023.3294092.","ama":"Soleymani M, Santamaria I, Jorswieck EA. Spectral and Energy Efficiency Maximization of MISO STAR-RIS-Assisted URLLC Systems. IEEE Access. 2023;11:70833-70852. doi:10.1109/access.2023.3294092","apa":"Soleymani, M., Santamaria, I., & Jorswieck, E. A. (2023). Spectral and Energy Efficiency Maximization of MISO STAR-RIS-Assisted URLLC Systems. IEEE Access, 11, 70833–70852. https://doi.org/10.1109/access.2023.3294092","short":"M. Soleymani, I. Santamaria, E.A. Jorswieck, IEEE Access 11 (2023) 70833–70852.","bibtex":"@article{Soleymani_Santamaria_Jorswieck_2023, title={Spectral and Energy Efficiency Maximization of MISO STAR-RIS-Assisted URLLC Systems}, volume={11}, DOI={10.1109/access.2023.3294092}, journal={IEEE Access}, publisher={Institute of Electrical and Electronics Engineers (IEEE)}, author={Soleymani, Mohammad and Santamaria, Ignacio and Jorswieck, Eduard A.}, year={2023}, pages={70833–70852} }","mla":"Soleymani, Mohammad, et al. “Spectral and Energy Efficiency Maximization of MISO STAR-RIS-Assisted URLLC Systems.” IEEE Access, vol. 11, Institute of Electrical and Electronics Engineers (IEEE), 2023, pp. 70833–52, doi:10.1109/access.2023.3294092."},"publication_identifier":{"issn":["2169-3536"]},"publication_status":"published"},{"title":"Nonlinear Dielectric Geometric-Phase Metasurface with Simultaneous Structure and Lattice Symmetry Design","publisher":"American Chemical Society (ACS)","date_created":"2023-12-13T14:11:41Z","year":"2023","quality_controlled":"1","issue":"12","keyword":["Electrical and Electronic Engineering","Atomic and Molecular Physics","and Optics","Biotechnology","Electronic","Optical and Magnetic Materials"],"language":[{"iso":"eng"}],"abstract":[{"lang":"eng","text":"In this work, we utilize thin dielectric meta-atoms placed on a silver substrate to efficiently enhance and manipulate the third-harmonic generation. We theoretically and experimentally reveal that when the structural symmetry of the meta-atom is incompatible with the lattice symmetry of an array, some generalized nonlinear geometric phases appear, which offers new possibilities for harmonic generation control beyond the accessible symmetries governed by the selection rule. The underlying mechanism is attributed to the modified rotation of the effective principal axis of a dense meta-atom array, where the strong coupling among the units gives rise to a generalized linear geometric phase modulation of the pump light. Therefore, nonlinear geometric phases carried by third-harmonic emissions are the natural result of the wave-mixing process among the modes excited at the fundamental frequency. This mechanism further points out a new strategy to predict the nonlinear geometric phases delivered by the nanostructures according to their linear responses. Our design is simple and efficient and offers alternatives for the nonlinear meta-devices that are capable of flexible photon generation and manipulation."}],"publication":"ACS Photonics","main_file_link":[{"url":"https://pubs.acs.org/doi/full/10.1021/acsphotonics.3c01163","open_access":"1"}],"doi":"10.1021/acsphotonics.3c01163","oa":"1","date_updated":"2024-04-16T06:47:40Z","author":[{"first_name":"Bingyi","last_name":"Liu","full_name":"Liu, Bingyi"},{"first_name":"René","full_name":"Geromel, René","last_name":"Geromel"},{"first_name":"Zhaoxian","last_name":"Su","full_name":"Su, Zhaoxian"},{"full_name":"Guo, Kai","last_name":"Guo","first_name":"Kai"},{"first_name":"Yongtian","last_name":"Wang","full_name":"Wang, Yongtian"},{"full_name":"Guo, Zhongyi","last_name":"Guo","first_name":"Zhongyi"},{"full_name":"Huang, Lingling","last_name":"Huang","first_name":"Lingling"},{"full_name":"Zentgraf, Thomas","id":"30525","last_name":"Zentgraf","orcid":"0000-0002-8662-1101","first_name":"Thomas"}],"volume":10,"citation":{"ama":"Liu B, Geromel R, Su Z, et al. Nonlinear Dielectric Geometric-Phase Metasurface with Simultaneous Structure and Lattice Symmetry Design. ACS Photonics. 2023;10(12):4357-4366. doi:10.1021/acsphotonics.3c01163","ieee":"B. Liu et al., “Nonlinear Dielectric Geometric-Phase Metasurface with Simultaneous Structure and Lattice Symmetry Design,” ACS Photonics, vol. 10, no. 12, pp. 4357–4366, 2023, doi: 10.1021/acsphotonics.3c01163.","chicago":"Liu, Bingyi, René Geromel, Zhaoxian Su, Kai Guo, Yongtian Wang, Zhongyi Guo, Lingling Huang, and Thomas Zentgraf. “Nonlinear Dielectric Geometric-Phase Metasurface with Simultaneous Structure and Lattice Symmetry Design.” ACS Photonics 10, no. 12 (2023): 4357–66. https://doi.org/10.1021/acsphotonics.3c01163.","mla":"Liu, Bingyi, et al. “Nonlinear Dielectric Geometric-Phase Metasurface with Simultaneous Structure and Lattice Symmetry Design.” ACS Photonics, vol. 10, no. 12, American Chemical Society (ACS), 2023, pp. 4357–66, doi:10.1021/acsphotonics.3c01163.","bibtex":"@article{Liu_Geromel_Su_Guo_Wang_Guo_Huang_Zentgraf_2023, title={Nonlinear Dielectric Geometric-Phase Metasurface with Simultaneous Structure and Lattice Symmetry Design}, volume={10}, DOI={10.1021/acsphotonics.3c01163}, number={12}, journal={ACS Photonics}, publisher={American Chemical Society (ACS)}, author={Liu, Bingyi and Geromel, René and Su, Zhaoxian and Guo, Kai and Wang, Yongtian and Guo, Zhongyi and Huang, Lingling and Zentgraf, Thomas}, year={2023}, pages={4357–4366} }","short":"B. Liu, R. Geromel, Z. Su, K. Guo, Y. Wang, Z. Guo, L. Huang, T. Zentgraf, ACS Photonics 10 (2023) 4357–4366.","apa":"Liu, B., Geromel, R., Su, Z., Guo, K., Wang, Y., Guo, Z., Huang, L., & Zentgraf, T. (2023). Nonlinear Dielectric Geometric-Phase Metasurface with Simultaneous Structure and Lattice Symmetry Design. ACS Photonics, 10(12), 4357–4366. https://doi.org/10.1021/acsphotonics.3c01163"},"page":"4357-4366","intvolume":" 10","publication_status":"published","publication_identifier":{"issn":["2330-4022","2330-4022"]},"article_type":"original","funded_apc":"1","project":[{"grant_number":"231447078","_id":"170","name":"TRR 142 - B09: TRR 142 - Effiziente Erzeugung mit maßgeschneiderter optischer Phaselage der zweiten Harmonischen mittels Quasi-gebundener Zustände in GaAs Metaoberflächen (B09*)"},{"_id":"55","name":"TRR 142 - B: TRR 142 - Project Area B"},{"_id":"53","name":"TRR 142: TRR 142 - Maßgeschneiderte nichtlineare Photonik: Von grundlegenden Konzepten zu funktionellen Strukturen","grant_number":"231447078"}],"_id":"49607","user_id":"30525","department":[{"_id":"15"},{"_id":"230"},{"_id":"289"},{"_id":"623"}],"status":"public","type":"journal_article"},{"status":"public","abstract":[{"text":"In recent years, frustrated Lewis pairs have been widely used in small molecules activation and catalytic transformations. This graphic review is aimed to provide the fundamental understanding of frustrated Lewis pair reactivity and the exploitation thereof in catalytic reactions.","lang":"eng"}],"type":"journal_article","publication":"SynOpen","language":[{"iso":"eng"}],"keyword":["Organic Chemistry","Materials Science (miscellaneous)","Biomaterials","Catalysis"],"user_id":"53339","_id":"35693","citation":{"ama":"Zhou R, Tavandashti Z, Paradies J. Frustrated Lewis Pair Catalysed Reactions. SynOpen. Published online 2023. doi:10.1055/a-2005-5443","ieee":"R. Zhou, Z. Tavandashti, and J. Paradies, “Frustrated Lewis Pair Catalysed Reactions,” SynOpen, 2023, doi: 10.1055/a-2005-5443.","chicago":"Zhou, Rundong, Zoleykha Tavandashti, and Jan Paradies. “Frustrated Lewis Pair Catalysed Reactions.” SynOpen, 2023. https://doi.org/10.1055/a-2005-5443.","apa":"Zhou, R., Tavandashti, Z., & Paradies, J. (2023). Frustrated Lewis Pair Catalysed Reactions. SynOpen. https://doi.org/10.1055/a-2005-5443","bibtex":"@article{Zhou_Tavandashti_Paradies_2023, title={Frustrated Lewis Pair Catalysed Reactions}, DOI={10.1055/a-2005-5443}, journal={SynOpen}, publisher={Georg Thieme Verlag KG}, author={Zhou, Rundong and Tavandashti, Zoleykha and Paradies, Jan}, year={2023} }","mla":"Zhou, Rundong, et al. “Frustrated Lewis Pair Catalysed Reactions.” SynOpen, Georg Thieme Verlag KG, 2023, doi:10.1055/a-2005-5443.","short":"R. Zhou, Z. Tavandashti, J. Paradies, SynOpen (2023)."},"year":"2023","publication_status":"published","publication_identifier":{"issn":["2509-9396"]},"doi":"10.1055/a-2005-5443","title":"Frustrated Lewis Pair Catalysed Reactions","date_created":"2023-01-10T08:58:57Z","author":[{"first_name":"Rundong","last_name":"Zhou","full_name":"Zhou, Rundong"},{"first_name":"Zoleykha","last_name":"Tavandashti","full_name":"Tavandashti, Zoleykha"},{"first_name":"Jan","id":"53339","full_name":"Paradies, Jan","orcid":"0000-0002-3698-668X","last_name":"Paradies"}],"date_updated":"2023-01-23T12:54:12Z","publisher":"Georg Thieme Verlag KG"},{"article_number":"146442072311582","keyword":["Mechanical Engineering","General Materials Science"],"language":[{"iso":"eng"}],"_id":"42636","user_id":"40450","department":[{"_id":"157"}],"abstract":[{"lang":"eng","text":" Laser additive manufacturing processes are used for the production of highly complex geometric structures due to their high geometric freedom. Additive manufacturing processes, in particular powder-based selective laser melting, are used to produce metallic additive manufactured components for the automotive and aerospace industries. Different materials are often joined together to realize sustainable lightweight construction. The production of such mixed construction joints is often realized using mechanical joining technology (e.g. self-piercing riveting). However, there is currently very little experience with the mechanical joining of metallic additive manufacturing components. Furthermore, there is insufficient knowledge about the effects that occur during the mechanical joining of additive manufacturing components. In this article, a method is presented to investigate the joinability of additively manufactured components with conventionally manufactured components using a numerical simulation of the self-piercing riveting process. For this purpose, the additive manufacturing materials are characterized experimentally, the simulation model is configured, and the joining process with additive manufacturing materials is represented in the numerical simulation. Furthermore, the influence of the building direction on the mechanical properties is shown using miniature tensile specimens. Besides the configuration of the simulation model, the influence of heat treatment on the self-piercing riveting process is presented. "}],"status":"public","type":"journal_article","publication":"Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications","title":"Development of a numerical simulation model for self-piercing riveting of additive manufactured AlSi10Mg","doi":"10.1177/14644207231158213","publisher":"SAGE Publications","date_updated":"2023-02-28T10:55:03Z","author":[{"first_name":"Per","id":"40450","full_name":"Heyser, Per","last_name":"Heyser"},{"full_name":"Petker, Rudolf","last_name":"Petker","first_name":"Rudolf"},{"first_name":"Gerson","last_name":"Meschut","orcid":"0000-0002-2763-1246","id":"32056","full_name":"Meschut, Gerson"}],"date_created":"2023-02-28T10:52:49Z","year":"2023","citation":{"ieee":"P. Heyser, R. Petker, and G. Meschut, “Development of a numerical simulation model for self-piercing riveting of additive manufactured AlSi10Mg,” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Art. no. 146442072311582, 2023, doi: 10.1177/14644207231158213.","chicago":"Heyser, Per, Rudolf Petker, and Gerson Meschut. “Development of a Numerical Simulation Model for Self-Piercing Riveting of Additive Manufactured AlSi10Mg.” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 2023. https://doi.org/10.1177/14644207231158213.","ama":"Heyser P, Petker R, Meschut G. Development of a numerical simulation model for self-piercing riveting of additive manufactured AlSi10Mg. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. Published online 2023. doi:10.1177/14644207231158213","apa":"Heyser, P., Petker, R., & Meschut, G. (2023). Development of a numerical simulation model for self-piercing riveting of additive manufactured AlSi10Mg. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Article 146442072311582. https://doi.org/10.1177/14644207231158213","short":"P. Heyser, R. Petker, G. Meschut, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2023).","mla":"Heyser, Per, et al. “Development of a Numerical Simulation Model for Self-Piercing Riveting of Additive Manufactured AlSi10Mg.” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 146442072311582, SAGE Publications, 2023, doi:10.1177/14644207231158213.","bibtex":"@article{Heyser_Petker_Meschut_2023, title={Development of a numerical simulation model for self-piercing riveting of additive manufactured AlSi10Mg}, DOI={10.1177/14644207231158213}, number={146442072311582}, journal={Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications}, publisher={SAGE Publications}, author={Heyser, Per and Petker, Rudolf and Meschut, Gerson}, year={2023} }"},"publication_status":"epub_ahead","quality_controlled":"1","publication_identifier":{"issn":["1464-4207","2041-3076"]}},{"type":"journal_article","publication":"Advanced Energy Materials","status":"public","user_id":"84268","department":[{"_id":"633"}],"_id":"37267","language":[{"iso":"eng"}],"keyword":["General Materials Science","Renewable Energy","Sustainability and the Environment"],"publication_status":"published","publication_identifier":{"issn":["1614-6832","1614-6840"]},"citation":{"ama":"Mistry A, Srinivasan V, Steinrück H-G. Characterizing Ion Transport in Electrolytes via Concentration and Velocity Profiles. Advanced Energy Materials. 2023;13:2203690. doi:10.1002/aenm.202203690","chicago":"Mistry, Aashutosh, Venkat Srinivasan, and Hans-Georg Steinrück. “Characterizing Ion Transport in Electrolytes via Concentration and Velocity Profiles.” Advanced Energy Materials 13 (2023): 2203690. https://doi.org/10.1002/aenm.202203690.","ieee":"A. Mistry, V. Srinivasan, and H.-G. Steinrück, “Characterizing Ion Transport in Electrolytes via Concentration and Velocity Profiles,” Advanced Energy Materials, vol. 13, p. 2203690, 2023, doi: 10.1002/aenm.202203690.","short":"A. Mistry, V. Srinivasan, H.-G. Steinrück, Advanced Energy Materials 13 (2023) 2203690.","bibtex":"@article{Mistry_Srinivasan_Steinrück_2023, title={Characterizing Ion Transport in Electrolytes via Concentration and Velocity Profiles}, volume={13}, DOI={10.1002/aenm.202203690}, journal={Advanced Energy Materials}, publisher={Wiley}, author={Mistry, Aashutosh and Srinivasan, Venkat and Steinrück, Hans-Georg}, year={2023}, pages={2203690} }","mla":"Mistry, Aashutosh, et al. “Characterizing Ion Transport in Electrolytes via Concentration and Velocity Profiles.” Advanced Energy Materials, vol. 13, Wiley, 2023, p. 2203690, doi:10.1002/aenm.202203690.","apa":"Mistry, A., Srinivasan, V., & Steinrück, H.-G. (2023). Characterizing Ion Transport in Electrolytes via Concentration and Velocity Profiles. Advanced Energy Materials, 13, 2203690. https://doi.org/10.1002/aenm.202203690"},"page":"2203690","intvolume":" 13","year":"2023","author":[{"first_name":"Aashutosh","last_name":"Mistry","full_name":"Mistry, Aashutosh"},{"first_name":"Venkat","last_name":"Srinivasan","full_name":"Srinivasan, Venkat"},{"first_name":"Hans-Georg","orcid":"0000-0001-6373-0877","last_name":"Steinrück","full_name":"Steinrück, Hans-Georg","id":"84268"}],"date_created":"2023-01-18T09:47:47Z","volume":13,"date_updated":"2023-03-23T08:28:44Z","publisher":"Wiley","doi":"10.1002/aenm.202203690","title":"Characterizing Ion Transport in Electrolytes via Concentration and Velocity Profiles"},{"publication_identifier":{"issn":["0043-2288","1878-6669"]},"publication_status":"published","year":"2023","citation":{"mla":"Wippermann, Jan, et al. “Correction: Thermal Influence of Resistance Spot Welding on a Nearby Overmolded Thermoplastic–Metal Joint.” Welding in the World, Springer Science and Business Media LLC, 2023, doi:10.1007/s40194-023-01499-2.","bibtex":"@article{Wippermann_Meschut_Koshukow_Liebsch_Gude_Minch_Kolbe_2023, title={Correction: Thermal influence of resistance spot welding on a nearby overmolded thermoplastic–metal joint}, DOI={10.1007/s40194-023-01499-2}, journal={Welding in the World}, publisher={Springer Science and Business Media LLC}, author={Wippermann, Jan and Meschut, Gerson and Koshukow, Wikentij and Liebsch, Alexander and Gude, Maik and Minch, Steven and Kolbe, Björn}, year={2023} }","short":"J. Wippermann, G. Meschut, W. Koshukow, A. Liebsch, M. Gude, S. Minch, B. Kolbe, Welding in the World (2023).","apa":"Wippermann, J., Meschut, G., Koshukow, W., Liebsch, A., Gude, M., Minch, S., & Kolbe, B. (2023). Correction: Thermal influence of resistance spot welding on a nearby overmolded thermoplastic–metal joint. Welding in the World. https://doi.org/10.1007/s40194-023-01499-2","ieee":"J. Wippermann et al., “Correction: Thermal influence of resistance spot welding on a nearby overmolded thermoplastic–metal joint,” Welding in the World, 2023, doi: 10.1007/s40194-023-01499-2.","chicago":"Wippermann, Jan, Gerson Meschut, Wikentij Koshukow, Alexander Liebsch, Maik Gude, Steven Minch, and Björn Kolbe. “Correction: Thermal Influence of Resistance Spot Welding on a Nearby Overmolded Thermoplastic–Metal Joint.” Welding in the World, 2023. https://doi.org/10.1007/s40194-023-01499-2.","ama":"Wippermann J, Meschut G, Koshukow W, et al. Correction: Thermal influence of resistance spot welding on a nearby overmolded thermoplastic–metal joint. Welding in the World. Published online 2023. doi:10.1007/s40194-023-01499-2"},"publisher":"Springer Science and Business Media LLC","date_updated":"2023-03-29T08:19:21Z","date_created":"2023-03-29T08:16:21Z","author":[{"last_name":"Wippermann","full_name":"Wippermann, Jan","first_name":"Jan"},{"first_name":"Gerson","full_name":"Meschut, Gerson","last_name":"Meschut"},{"last_name":"Koshukow","full_name":"Koshukow, Wikentij","first_name":"Wikentij"},{"last_name":"Liebsch","full_name":"Liebsch, Alexander","first_name":"Alexander"},{"first_name":"Maik","last_name":"Gude","full_name":"Gude, Maik"},{"last_name":"Minch","full_name":"Minch, Steven","first_name":"Steven"},{"first_name":"Björn","last_name":"Kolbe","full_name":"Kolbe, Björn"}],"title":"Correction: Thermal influence of resistance spot welding on a nearby overmolded thermoplastic–metal joint","doi":"10.1007/s40194-023-01499-2","publication":"Welding in the World","type":"journal_article","status":"public","_id":"43154","department":[{"_id":"157"}],"user_id":"53912","keyword":["Metals and Alloys","Mechanical Engineering","Mechanics of Materials"],"language":[{"iso":"eng"}]},{"year":"2023","page":"10-19","intvolume":" 94","citation":{"apa":"Voswinkel, D. (2023). Application of a new strategy for time-efficient laser treatment of galvanized steel substrates to improve the adhesion properties. Journal of Manufacturing Processes, 94, 10–19. https://doi.org//10.1016/j.jmapro.2023.03.056","short":"D. Voswinkel, Journal of Manufacturing Processes 94 (2023) 10–19.","bibtex":"@article{Voswinkel_2023, title={Application of a new strategy for time-efficient laser treatment of galvanized steel substrates to improve the adhesion properties}, volume={94}, DOI={/10.1016/j.jmapro.2023.03.056}, journal={Journal of Manufacturing Processes}, publisher={Elsevier}, author={Voswinkel, Dietrich}, year={2023}, pages={10–19} }","mla":"Voswinkel, Dietrich. “Application of a New Strategy for Time-Efficient Laser Treatment of Galvanized Steel Substrates to Improve the Adhesion Properties.” Journal of Manufacturing Processes, vol. 94, Elsevier, 2023, pp. 10–19, doi:/10.1016/j.jmapro.2023.03.056.","chicago":"Voswinkel, Dietrich. “Application of a New Strategy for Time-Efficient Laser Treatment of Galvanized Steel Substrates to Improve the Adhesion Properties.” Journal of Manufacturing Processes 94 (2023): 10–19. https://doi.org//10.1016/j.jmapro.2023.03.056.","ieee":"D. Voswinkel, “Application of a new strategy for time-efficient laser treatment of galvanized steel substrates to improve the adhesion properties,” Journal of Manufacturing Processes, vol. 94, pp. 10–19, 2023, doi: /10.1016/j.jmapro.2023.03.056.","ama":"Voswinkel D. Application of a new strategy for time-efficient laser treatment of galvanized steel substrates to improve the adhesion properties. Journal of Manufacturing Processes. 2023;94:10-19. doi:/10.1016/j.jmapro.2023.03.056"},"title":"Application of a new strategy for time-efficient laser treatment of galvanized steel substrates to improve the adhesion properties","doi":"/10.1016/j.jmapro.2023.03.056","main_file_link":[{"url":"https://www.sciencedirect.com/science/article/abs/pii/S1526612523002682?via%3Dihub"}],"publisher":"Elsevier","date_updated":"2023-04-03T08:47:06Z","volume":94,"author":[{"first_name":"Dietrich","last_name":"Voswinkel","id":"52634","full_name":"Voswinkel, Dietrich"}],"date_created":"2023-04-03T08:46:43Z","abstract":[{"text":"Laser structuring to improve the adhesion properties of steel substrates in fiber-metal laminates offers many advantages that are highly suitable for modern industrial requirements. Maintenance and energy costs are relatively low, it is easy to automate, and there are no by-products such as chemicals or abrasives to dispose of or recycle. This makes laser structuring a particularly environmentally friendly process, which is nowadays more important than ever. On the other hand, the process time for laser structuring is much higher than for chemical pre-treatment, for example. In past studies, the time and cost efficiency of the laser structuring process has tended to play a minor role. However, there are approaches in which laser structured surfaces are adapted to the shear stress peaks occurring within the adhesive layer, thus requiring only partial structuring of the area to be bonded, potentially saving process time. In this experimental study, electrolytically galvanized steel substrates were partially laser structured to match the shear stress distribution and then bonded to a carbon fiber-reinforced plastic. The adhesion properties achieved were characterized using shear tensile tests and compared with the properties of the fully structured ones. With the partial laser structuring, a saving of 66 % of the conventional process time was achieved while maintaining 95 % of the same shear strength.","lang":"eng"}],"status":"public","publication":"Journal of Manufacturing Processes","type":"journal_article","keyword":["Laser treatment Adhesive bonding Surface technology Hybrid materials"],"language":[{"iso":"eng"}],"_id":"43371","department":[{"_id":"9"},{"_id":"321"},{"_id":"158"}],"user_id":"52634"}]