[{"user_id":"45673","keyword":["Mechanical Engineering","Mechanics of Materials","General Materials Science"],"abstract":[{"lang":"eng","text":"In many areas of product manufacturing constructions consist of individual components and metal sheets that are joined together to form complex structures. A simple and industrial common method for joining dissimilar and coated materials is clinching. During the joining process and due to the service load cracks can occur in the area of the joint, propagate due to cyclic loading and consequently lead to structural failure. For the prevention of these damage cases, first of all knowledge about the fracture mechanical material parameters regarding the original material state of the sheet metals used within the clinching process are essential.Within the scope of this paper experimental and numerical preliminary investigations regarding the fracture mechanical behavior of sheet metals used within the clinching process are presented. Due to the low thickness of 1.5 mm of the material sheets, the development of a new specimen is necessary to determine the crack growth rate curve including the fracture mechanical parameters like the threshold against crack growth ΔKI,th and the fracture toughness KIC of the base material HCT590X. For the experimental determination of the crack growth rate curve the numerical calculation of the geometry factor function as well as the calibration function of this special specimen are essential. After the experimental validation of the numerically determined calibration function, crack growth rate curves are determined for the stress ratios R = 0.1 and R = 0.3 to examine the mean stress sensitivity. In addition, the different rolling directions of 0° and 90° in relation to the initial crack are taken into account in order to investigate the influence of the anisotropy due to rolling."}],"doi":"10.4028/www.scientific.net/kem.883.127","title":"Numerical and Experimental Fracture Mechanical Investigations of Clinchable Sheet Metals Made of HCT590X","page":"127-132","volume":883,"type":"conference","quality_controlled":"1","publication":"Key Engineering Materials","department":[{"_id":"143"}],"citation":{"chicago":"Weiß, Deborah, Britta Schramm, and Gunter Kullmer. “Numerical and Experimental Fracture Mechanical Investigations of Clinchable Sheet Metals Made of HCT590X.” In Key Engineering Materials, 883:127–32. Trans Tech Publications, Ltd., 2021. https://doi.org/10.4028/www.scientific.net/kem.883.127.","ieee":"D. Weiß, B. Schramm, and G. Kullmer, “Numerical and Experimental Fracture Mechanical Investigations of Clinchable Sheet Metals Made of HCT590X,” in Key Engineering Materials, online, 2021, vol. 883, pp. 127–132, doi: 10.4028/www.scientific.net/kem.883.127.","apa":"Weiß, D., Schramm, B., & Kullmer, G. (2021). Numerical and Experimental Fracture Mechanical Investigations of Clinchable Sheet Metals Made of HCT590X. Key Engineering Materials, 883, 127–132. https://doi.org/10.4028/www.scientific.net/kem.883.127","ama":"Weiß D, Schramm B, Kullmer G. Numerical and Experimental Fracture Mechanical Investigations of Clinchable Sheet Metals Made of HCT590X. In: Key Engineering Materials. Vol 883. Trans Tech Publications, Ltd.; 2021:127-132. doi:10.4028/www.scientific.net/kem.883.127","short":"D. Weiß, B. Schramm, G. Kullmer, in: Key Engineering Materials, Trans Tech Publications, Ltd., 2021, pp. 127–132.","mla":"Weiß, Deborah, et al. “Numerical and Experimental Fracture Mechanical Investigations of Clinchable Sheet Metals Made of HCT590X.” Key Engineering Materials, vol. 883, Trans Tech Publications, Ltd., 2021, pp. 127–32, doi:10.4028/www.scientific.net/kem.883.127.","bibtex":"@inproceedings{Weiß_Schramm_Kullmer_2021, title={Numerical and Experimental Fracture Mechanical Investigations of Clinchable Sheet Metals Made of HCT590X}, volume={883}, DOI={10.4028/www.scientific.net/kem.883.127}, booktitle={Key Engineering Materials}, publisher={Trans Tech Publications, Ltd.}, author={Weiß, Deborah and Schramm, Britta and Kullmer, Gunter}, year={2021}, pages={127–132} }"},"publication_status":"published","intvolume":" 883","conference":{"end_date":"2021-03-31","name":"19th International Conference on Sheet Metal","start_date":"2021-03-29","location":"online"},"author":[{"full_name":"Weiß, Deborah","first_name":"Deborah","last_name":"Weiß","id":"45673"},{"id":"4668","last_name":"Schramm","first_name":"Britta","full_name":"Schramm, Britta"},{"id":"291","last_name":"Kullmer","full_name":"Kullmer, Gunter","first_name":"Gunter"}],"date_updated":"2023-04-27T10:13:19Z","_id":"30675","publication_identifier":{"issn":["1662-9795"]},"year":"2021","language":[{"iso":"eng"}],"status":"public","date_created":"2022-03-29T08:09:01Z","publisher":"Trans Tech Publications, Ltd."},{"volume":11,"article_number":"1188","issue":"5","publication":"Nanomaterials","type":"journal_article","user_id":"20179","keyword":["General Materials Science","General Chemical Engineering"],"title":"A Study about Schottky Barrier Height and Ideality Factor in Thin Film Transistors with Metal/Zinc Oxide Nanoparticles Structures Aiming Flexible Electronics Application","doi":"10.3390/nano11051188","abstract":[{"text":"Zinc oxide nanoparticles (ZnO NP) used for the channel region in inverted coplanar setup in Thin Film Transistors (TFT) were the focus of this study. The regions between the source electrode and the ZnO NP and the drain electrode were under investigation as they produce a Schottky barrier in metal-semiconductor interfaces. A more general Thermionic emission theory must be evaluated: one that considers both metal/semiconductor interfaces (MSM structures). Aluminum, gold, and nickel were used as metallization layers for source and drain electrodes. An organic-inorganic nanocomposite was used as a gate dielectric. The TFTs transfer and output characteristics curves were extracted, and a numerical computational program was used for fitting the data; hence information about Schottky Barrier Height (SBH) and ideality factors for each TFT could be estimated. The nickel metallization appears with the lowest SBH among the metals investigated. For this metal and for higher drain-to-source voltages, the SBH tended to converge to some value around 0.3 eV. The developed fitting method showed good fitting accuracy even when the metallization produced different SBH in each metal-semiconductor interface, as was the case for gold metallization. The Schottky effect is also present and was studied when the drain-to-source voltages and/or the gate voltage were increased.","lang":"eng"}],"_id":"39383","date_updated":"2023-03-22T10:27:25Z","date_created":"2023-01-24T10:08:10Z","publisher":"MDPI AG","publication_identifier":{"issn":["2079-4991"]},"year":"2021","language":[{"iso":"eng"}],"status":"public","citation":{"mla":"Kaufmann, Ivan Rodrigo, et al. “A Study about Schottky Barrier Height and Ideality Factor in Thin Film Transistors with Metal/Zinc Oxide Nanoparticles Structures Aiming Flexible Electronics Application.” Nanomaterials, vol. 11, no. 5, 1188, MDPI AG, 2021, doi:10.3390/nano11051188.","bibtex":"@article{Kaufmann_Zerey_Meyers_Reker_Vidor_Hilleringmann_2021, title={A Study about Schottky Barrier Height and Ideality Factor in Thin Film Transistors with Metal/Zinc Oxide Nanoparticles Structures Aiming Flexible Electronics Application}, volume={11}, DOI={10.3390/nano11051188}, number={51188}, journal={Nanomaterials}, publisher={MDPI AG}, author={Kaufmann, Ivan Rodrigo and Zerey, Onur and Meyers, Thorsten and Reker, Julia and Vidor, Fábio and Hilleringmann, Ulrich}, year={2021} }","short":"I.R. Kaufmann, O. Zerey, T. Meyers, J. Reker, F. Vidor, U. Hilleringmann, Nanomaterials 11 (2021).","ama":"Kaufmann IR, Zerey O, Meyers T, Reker J, Vidor F, Hilleringmann U. A Study about Schottky Barrier Height and Ideality Factor in Thin Film Transistors with Metal/Zinc Oxide Nanoparticles Structures Aiming Flexible Electronics Application. Nanomaterials. 2021;11(5). doi:10.3390/nano11051188","apa":"Kaufmann, I. R., Zerey, O., Meyers, T., Reker, J., Vidor, F., & Hilleringmann, U. (2021). A Study about Schottky Barrier Height and Ideality Factor in Thin Film Transistors with Metal/Zinc Oxide Nanoparticles Structures Aiming Flexible Electronics Application. Nanomaterials, 11(5), Article 1188. https://doi.org/10.3390/nano11051188","chicago":"Kaufmann, Ivan Rodrigo, Onur Zerey, Thorsten Meyers, Julia Reker, Fábio Vidor, and Ulrich Hilleringmann. “A Study about Schottky Barrier Height and Ideality Factor in Thin Film Transistors with Metal/Zinc Oxide Nanoparticles Structures Aiming Flexible Electronics Application.” Nanomaterials 11, no. 5 (2021). https://doi.org/10.3390/nano11051188.","ieee":"I. R. Kaufmann, O. Zerey, T. Meyers, J. Reker, F. Vidor, and U. Hilleringmann, “A Study about Schottky Barrier Height and Ideality Factor in Thin Film Transistors with Metal/Zinc Oxide Nanoparticles Structures Aiming Flexible Electronics Application,” Nanomaterials, vol. 11, no. 5, Art. no. 1188, 2021, doi: 10.3390/nano11051188."},"publication_status":"published","department":[{"_id":"59"}],"author":[{"last_name":"Kaufmann","full_name":"Kaufmann, Ivan Rodrigo","first_name":"Ivan Rodrigo"},{"first_name":"Onur","full_name":"Zerey, Onur","last_name":"Zerey"},{"last_name":"Meyers","full_name":"Meyers, Thorsten","first_name":"Thorsten"},{"first_name":"Julia","full_name":"Reker, Julia","last_name":"Reker"},{"last_name":"Vidor","first_name":"Fábio","full_name":"Vidor, Fábio"},{"first_name":"Ulrich","full_name":"Hilleringmann, Ulrich","last_name":"Hilleringmann","id":"20179"}],"intvolume":" 11"},{"author":[{"last_name":"Meier","full_name":"Meier, Lukas","first_name":"Lukas"},{"orcid":"0000-0002-2717-5076","first_name":"Wolf Gero","full_name":"Schmidt, Wolf Gero","id":"468","last_name":"Schmidt"}],"intvolume":" 259","publication_status":"published","citation":{"apa":"Meier, L., & Schmidt, W. G. (2021). GaInP/AlInP(001) Interfaces from Density Functional Theory. Physica Status Solidi (b), 259(1), Article 2100462. https://doi.org/10.1002/pssb.202100462","ama":"Meier L, Schmidt WG. GaInP/AlInP(001) Interfaces from Density Functional Theory. physica status solidi (b). 2021;259(1). doi:10.1002/pssb.202100462","ieee":"L. Meier and W. G. Schmidt, “GaInP/AlInP(001) Interfaces from Density Functional Theory,” physica status solidi (b), vol. 259, no. 1, Art. no. 2100462, 2021, doi: 10.1002/pssb.202100462.","chicago":"Meier, Lukas, and Wolf Gero Schmidt. “GaInP/AlInP(001) Interfaces from Density Functional Theory.” Physica Status Solidi (b) 259, no. 1 (2021). https://doi.org/10.1002/pssb.202100462.","bibtex":"@article{Meier_Schmidt_2021, title={GaInP/AlInP(001) Interfaces from Density Functional Theory}, volume={259}, DOI={10.1002/pssb.202100462}, number={12100462}, journal={physica status solidi (b)}, publisher={Wiley}, author={Meier, Lukas and Schmidt, Wolf Gero}, year={2021} }","mla":"Meier, Lukas, and Wolf Gero Schmidt. “GaInP/AlInP(001) Interfaces from Density Functional Theory.” Physica Status Solidi (b), vol. 259, no. 1, 2100462, Wiley, 2021, doi:10.1002/pssb.202100462.","short":"L. Meier, W.G. Schmidt, Physica Status Solidi (b) 259 (2021)."},"department":[{"_id":"15"},{"_id":"170"},{"_id":"295"},{"_id":"230"},{"_id":"35"}],"publisher":"Wiley","date_created":"2023-01-26T09:41:51Z","status":"public","language":[{"iso":"eng"}],"publication_identifier":{"issn":["0370-1972","1521-3951"]},"year":"2021","_id":"40244","date_updated":"2023-04-20T14:28:22Z","title":"GaInP/AlInP(001) Interfaces from Density Functional Theory","doi":"10.1002/pssb.202100462","project":[{"_id":"52","name":"PC2: Computing Resources Provided by the Paderborn Center for Parallel Computing"}],"keyword":["Condensed Matter Physics","Electronic","Optical and Magnetic Materials"],"user_id":"16199","publication":"physica status solidi (b)","type":"journal_article","volume":259,"issue":"1","article_number":"2100462"},{"intvolume":" 33","author":[{"first_name":"Philip","full_name":"Klement, Philip","last_name":"Klement"},{"last_name":"Dehnhardt","first_name":"Natalie","full_name":"Dehnhardt, Natalie"},{"last_name":"Dong","id":"67188","first_name":"Chuan-Ding","full_name":"Dong, Chuan-Ding"},{"first_name":"Florian","full_name":"Dobener, Florian","last_name":"Dobener"},{"last_name":"Bayliff","first_name":"Samuel","full_name":"Bayliff, Samuel"},{"last_name":"Winkler","first_name":"Julius","full_name":"Winkler, Julius"},{"first_name":"Detlev M.","full_name":"Hofmann, Detlev M.","last_name":"Hofmann"},{"first_name":"Peter J.","full_name":"Klar, Peter J.","last_name":"Klar"},{"orcid":"0000-0003-4042-4951","last_name":"Schumacher","id":"27271","full_name":"Schumacher, Stefan","first_name":"Stefan"},{"first_name":"Sangam","full_name":"Chatterjee, Sangam","last_name":"Chatterjee"},{"last_name":"Heine","first_name":"Johanna","full_name":"Heine, Johanna"}],"department":[{"_id":"15"},{"_id":"170"},{"_id":"297"},{"_id":"230"},{"_id":"35"}],"publication_status":"published","citation":{"bibtex":"@article{Klement_Dehnhardt_Dong_Dobener_Bayliff_Winkler_Hofmann_Klar_Schumacher_Chatterjee_et al._2021, title={Atomically Thin Sheets of Lead‐Free 1D Hybrid Perovskites Feature Tunable White‐Light Emission from Self‐Trapped Excitons}, volume={33}, DOI={10.1002/adma.202100518}, number={232100518}, journal={Advanced Materials}, publisher={Wiley}, author={Klement, Philip and Dehnhardt, Natalie and Dong, Chuan-Ding and Dobener, Florian and Bayliff, Samuel and Winkler, Julius and Hofmann, Detlev M. and Klar, Peter J. and Schumacher, Stefan and Chatterjee, Sangam and et al.}, year={2021} }","mla":"Klement, Philip, et al. “Atomically Thin Sheets of Lead‐Free 1D Hybrid Perovskites Feature Tunable White‐Light Emission from Self‐Trapped Excitons.” Advanced Materials, vol. 33, no. 23, 2100518, Wiley, 2021, doi:10.1002/adma.202100518.","short":"P. Klement, N. Dehnhardt, C.-D. Dong, F. Dobener, S. Bayliff, J. Winkler, D.M. Hofmann, P.J. Klar, S. Schumacher, S. Chatterjee, J. Heine, Advanced Materials 33 (2021).","apa":"Klement, P., Dehnhardt, N., Dong, C.-D., Dobener, F., Bayliff, S., Winkler, J., Hofmann, D. M., Klar, P. J., Schumacher, S., Chatterjee, S., & Heine, J. (2021). Atomically Thin Sheets of Lead‐Free 1D Hybrid Perovskites Feature Tunable White‐Light Emission from Self‐Trapped Excitons. Advanced Materials, 33(23), Article 2100518. https://doi.org/10.1002/adma.202100518","ama":"Klement P, Dehnhardt N, Dong C-D, et al. Atomically Thin Sheets of Lead‐Free 1D Hybrid Perovskites Feature Tunable White‐Light Emission from Self‐Trapped Excitons. Advanced Materials. 2021;33(23). doi:10.1002/adma.202100518","ieee":"P. Klement et al., “Atomically Thin Sheets of Lead‐Free 1D Hybrid Perovskites Feature Tunable White‐Light Emission from Self‐Trapped Excitons,” Advanced Materials, vol. 33, no. 23, Art. no. 2100518, 2021, doi: 10.1002/adma.202100518.","chicago":"Klement, Philip, Natalie Dehnhardt, Chuan-Ding Dong, Florian Dobener, Samuel Bayliff, Julius Winkler, Detlev M. Hofmann, et al. “Atomically Thin Sheets of Lead‐Free 1D Hybrid Perovskites Feature Tunable White‐Light Emission from Self‐Trapped Excitons.” Advanced Materials 33, no. 23 (2021). https://doi.org/10.1002/adma.202100518."},"status":"public","year":"2021","publication_identifier":{"issn":["0935-9648","1521-4095"]},"language":[{"iso":"eng"}],"publisher":"Wiley","date_created":"2023-01-26T15:51:03Z","date_updated":"2023-04-20T15:33:14Z","_id":"40434","doi":"10.1002/adma.202100518","project":[{"name":"PC2: Computing Resources Provided by the Paderborn Center for Parallel Computing","_id":"52"}],"title":"Atomically Thin Sheets of Lead‐Free 1D Hybrid Perovskites Feature Tunable White‐Light Emission from Self‐Trapped Excitons","user_id":"16199","keyword":["Mechanical Engineering","Mechanics of Materials","General Materials Science"],"type":"journal_article","publication":"Advanced Materials","issue":"23","article_number":"2100518","volume":33},{"date_updated":"2023-04-27T08:52:59Z","_id":"34226","language":[{"iso":"eng"}],"year":"2021","publication_identifier":{"issn":["1662-9795"]},"status":"public","date_created":"2022-12-05T21:54:38Z","publisher":"Trans Tech Publications, Ltd.","department":[{"_id":"630"},{"_id":"157"}],"citation":{"ama":"Kappe F, Bobbert M, Meschut G. New Approach for Versatile Self Piercing Riveting: Joining System and Auxiliary Part. Key Engineering Materials. 2021;883:3-10. doi:10.4028/www.scientific.net/kem.883.3","apa":"Kappe, F., Bobbert, M., & Meschut, G. (2021). New Approach for Versatile Self Piercing Riveting: Joining System and Auxiliary Part. Key Engineering Materials, 883, 3–10. https://doi.org/10.4028/www.scientific.net/kem.883.3","chicago":"Kappe, Fabian, Mathias Bobbert, and Gerson Meschut. “New Approach for Versatile Self Piercing Riveting: Joining System and Auxiliary Part.” Key Engineering Materials 883 (2021): 3–10. https://doi.org/10.4028/www.scientific.net/kem.883.3.","ieee":"F. Kappe, M. Bobbert, and G. Meschut, “New Approach for Versatile Self Piercing Riveting: Joining System and Auxiliary Part,” Key Engineering Materials, vol. 883, pp. 3–10, 2021, doi: 10.4028/www.scientific.net/kem.883.3.","mla":"Kappe, Fabian, et al. “New Approach for Versatile Self Piercing Riveting: Joining System and Auxiliary Part.” Key Engineering Materials, vol. 883, Trans Tech Publications, Ltd., 2021, pp. 3–10, doi:10.4028/www.scientific.net/kem.883.3.","bibtex":"@article{Kappe_Bobbert_Meschut_2021, title={New Approach for Versatile Self Piercing Riveting: Joining System and Auxiliary Part}, volume={883}, DOI={10.4028/www.scientific.net/kem.883.3}, journal={Key Engineering Materials}, publisher={Trans Tech Publications, Ltd.}, author={Kappe, Fabian and Bobbert, Mathias and Meschut, Gerson}, year={2021}, pages={3–10} }","short":"F. Kappe, M. Bobbert, G. Meschut, Key Engineering Materials 883 (2021) 3–10."},"publication_status":"published","intvolume":" 883","author":[{"id":"66459","last_name":"Kappe","full_name":"Kappe, Fabian","first_name":"Fabian"},{"id":"7850","last_name":"Bobbert","first_name":"Mathias","full_name":"Bobbert, Mathias"},{"orcid":"0000-0002-2763-1246","first_name":"Gerson","full_name":"Meschut, Gerson","id":"32056","last_name":"Meschut"}],"page":"3-10","volume":883,"type":"journal_article","publication":"Key Engineering Materials","quality_controlled":"1","keyword":["Mechanical Engineering","Mechanics of Materials","General Materials Science"],"user_id":"66459","project":[{"_id":"130","name":"TRR 285: TRR 285","grant_number":"418701707"},{"_id":"133","name":"TRR 285 - C: TRR 285 - Project Area C"},{"_id":"146","name":"TRR 285 – C02: TRR 285 - Subproject C02"}],"abstract":[{"text":"The increasing use of multi-material constructions lead to a continuous increase in the use of mechanical joining techniques due to the wide range of joining possibilities as well as the high load-bearing capacities of the joints. Nevertheless, the currently rigid tool systems are not able to react to changing boundary conditions, like changing the material-geometry-combination. Therefore research work is crucial with regard to versatile joining systems. In this paper, a new approach for a versatile self-piercing riveting process considering the joining system as well as the auxiliary joining part is presented.","lang":"eng"}],"doi":"10.4028/www.scientific.net/kem.883.3","title":"New Approach for Versatile Self Piercing Riveting: Joining System and Auxiliary Part"},{"intvolume":" 52","author":[{"orcid":"0000-0002-3732-2236","id":"52771","last_name":"Hein","full_name":"Hein, Maxwell","first_name":"Maxwell"},{"id":"48411","last_name":"Hoyer","full_name":"Hoyer, Kay-Peter","first_name":"Kay-Peter"},{"full_name":"Schaper, Mirko","first_name":"Mirko","id":"43720","last_name":"Schaper"}],"department":[{"_id":"9"},{"_id":"158"}],"publication_status":"published","citation":{"short":"M. Hein, K.-P. Hoyer, M. Schaper, Materialwissenschaft Und Werkstofftechnik 52 (2021) 703–716.","mla":"Hein, Maxwell, et al. “Additively Processed TiAl6Nb7 Alloy for Biomedical Applications.” Materialwissenschaft Und Werkstofftechnik, vol. 52, no. 7, Wiley, 2021, pp. 703–16, doi:10.1002/mawe.202000288.","bibtex":"@article{Hein_Hoyer_Schaper_2021, title={Additively processed TiAl6Nb7 alloy for biomedical applications}, volume={52}, DOI={10.1002/mawe.202000288}, number={7}, journal={Materialwissenschaft und Werkstofftechnik}, publisher={Wiley}, author={Hein, Maxwell and Hoyer, Kay-Peter and Schaper, Mirko}, year={2021}, pages={703–716} }","chicago":"Hein, Maxwell, Kay-Peter Hoyer, and Mirko Schaper. “Additively Processed TiAl6Nb7 Alloy for Biomedical Applications.” Materialwissenschaft Und Werkstofftechnik 52, no. 7 (2021): 703–16. https://doi.org/10.1002/mawe.202000288.","ieee":"M. Hein, K.-P. Hoyer, and M. Schaper, “Additively processed TiAl6Nb7 alloy for biomedical applications,” Materialwissenschaft und Werkstofftechnik, vol. 52, no. 7, pp. 703–716, 2021, doi: 10.1002/mawe.202000288.","ama":"Hein M, Hoyer K-P, Schaper M. Additively processed TiAl6Nb7 alloy for biomedical applications. Materialwissenschaft und Werkstofftechnik. 2021;52(7):703-716. doi:10.1002/mawe.202000288","apa":"Hein, M., Hoyer, K.-P., & Schaper, M. (2021). Additively processed TiAl6Nb7 alloy for biomedical applications. Materialwissenschaft Und Werkstofftechnik, 52(7), 703–716. https://doi.org/10.1002/mawe.202000288"},"status":"public","language":[{"iso":"eng"}],"publication_identifier":{"issn":["0933-5137","1521-4052"]},"year":"2021","publisher":"Wiley","date_created":"2023-02-02T14:33:23Z","date_updated":"2023-06-01T14:33:34Z","_id":"41511","doi":"10.1002/mawe.202000288","title":"Additively processed TiAl6Nb7 alloy for biomedical applications","keyword":["Mechanical Engineering","Mechanics of Materials","Condensed Matter Physics","General Materials Science"],"user_id":"43720","type":"journal_article","publication":"Materialwissenschaft und Werkstofftechnik","quality_controlled":"1","issue":"7","volume":52,"page":"703-716"},{"volume":14,"article_number":"7190","issue":"23","publication":"Materials","quality_controlled":"1","type":"journal_article","keyword":["General Materials Science"],"user_id":"43720","title":"Requirements for Processing High-Strength AlZnMgCu Alloys with PBF-LB/M to Achieve Crack-Free and Dense Parts","doi":"10.3390/ma14237190","abstract":[{"text":"Processing aluminum alloys employing powder bed fusion of metals (PBF-LB/M) is becoming more attractive for the industry, especially if lightweight applications are needed. Unfortunately, high-strength aluminum alloys such as AA7075 are prone to hot cracking during PBF-LB/M, as well as welding. Both a large solidification range promoted by the alloying elements zinc and copper and a high thermal gradient accompanied with the manufacturing process conditions lead to or favor hot cracking. In the present study, a simple method for modifying the powder surface with titanium carbide nanoparticles (NPs) as a nucleating agent is aimed. The effect on the microstructure with different amounts of the nucleating agent is shown. For the aluminum alloy 7075 with 2.5 ma% titanium carbide nanoparticles, manufactured via PBF-LB/M, crack-free samples with a refined microstructure having no discernible melt pool boundaries and columnar grains are observed. After using a two-step ageing heat treatment, ultimate tensile strengths up to 465 MPa and an 8.9% elongation at break are achieved. Furthermore, it is demonstrated that not all nanoparticles used remain in the melt pool during PBF-LB/M.","lang":"eng"}],"_id":"41506","date_updated":"2023-06-01T14:34:46Z","date_created":"2023-02-02T14:31:05Z","publisher":"MDPI AG","language":[{"iso":"eng"}],"year":"2021","publication_identifier":{"issn":["1996-1944"]},"status":"public","citation":{"chicago":"Heiland, Steffen, Benjamin Milkereit, Kay-Peter Hoyer, Evgeny Zhuravlev, Olaf Kessler, and Mirko Schaper. “Requirements for Processing High-Strength AlZnMgCu Alloys with PBF-LB/M to Achieve Crack-Free and Dense Parts.” Materials 14, no. 23 (2021). https://doi.org/10.3390/ma14237190.","ieee":"S. Heiland, B. Milkereit, K.-P. Hoyer, E. Zhuravlev, O. Kessler, and M. Schaper, “Requirements for Processing High-Strength AlZnMgCu Alloys with PBF-LB/M to Achieve Crack-Free and Dense Parts,” Materials, vol. 14, no. 23, Art. no. 7190, 2021, doi: 10.3390/ma14237190.","apa":"Heiland, S., Milkereit, B., Hoyer, K.-P., Zhuravlev, E., Kessler, O., & Schaper, M. (2021). Requirements for Processing High-Strength AlZnMgCu Alloys with PBF-LB/M to Achieve Crack-Free and Dense Parts. Materials, 14(23), Article 7190. https://doi.org/10.3390/ma14237190","ama":"Heiland S, Milkereit B, Hoyer K-P, Zhuravlev E, Kessler O, Schaper M. Requirements for Processing High-Strength AlZnMgCu Alloys with PBF-LB/M to Achieve Crack-Free and Dense Parts. Materials. 2021;14(23). doi:10.3390/ma14237190","short":"S. Heiland, B. Milkereit, K.-P. Hoyer, E. Zhuravlev, O. Kessler, M. Schaper, Materials 14 (2021).","mla":"Heiland, Steffen, et al. “Requirements for Processing High-Strength AlZnMgCu Alloys with PBF-LB/M to Achieve Crack-Free and Dense Parts.” Materials, vol. 14, no. 23, 7190, MDPI AG, 2021, doi:10.3390/ma14237190.","bibtex":"@article{Heiland_Milkereit_Hoyer_Zhuravlev_Kessler_Schaper_2021, title={Requirements for Processing High-Strength AlZnMgCu Alloys with PBF-LB/M to Achieve Crack-Free and Dense Parts}, volume={14}, DOI={10.3390/ma14237190}, number={237190}, journal={Materials}, publisher={MDPI AG}, author={Heiland, Steffen and Milkereit, Benjamin and Hoyer, Kay-Peter and Zhuravlev, Evgeny and Kessler, Olaf and Schaper, Mirko}, year={2021} }"},"publication_status":"published","department":[{"_id":"9"},{"_id":"158"}],"author":[{"last_name":"Heiland","id":"77250","full_name":"Heiland, Steffen","first_name":"Steffen"},{"first_name":"Benjamin","full_name":"Milkereit, Benjamin","last_name":"Milkereit"},{"full_name":"Hoyer, Kay-Peter","first_name":"Kay-Peter","last_name":"Hoyer","id":"48411"},{"last_name":"Zhuravlev","first_name":"Evgeny","full_name":"Zhuravlev, Evgeny"},{"last_name":"Kessler","first_name":"Olaf","full_name":"Kessler, Olaf"},{"last_name":"Schaper","id":"43720","full_name":"Schaper, Mirko","first_name":"Mirko"}],"intvolume":" 14"},{"author":[{"last_name":"Tillmann","first_name":"Wolfgang","full_name":"Tillmann, Wolfgang"},{"full_name":"Lopes Dias, Nelson Filipe","first_name":"Nelson Filipe","last_name":"Lopes Dias"},{"last_name":"Franke","full_name":"Franke, Carlo","first_name":"Carlo"},{"last_name":"Kokalj","full_name":"Kokalj, David","first_name":"David"},{"first_name":"Dominic","full_name":"Stangier, Dominic","last_name":"Stangier"},{"last_name":"Filor","full_name":"Filor, Viviane","first_name":"Viviane"},{"full_name":"Mateus-Vargas, Rafael Hernán","first_name":"Rafael Hernán","last_name":"Mateus-Vargas"},{"last_name":"Oltmanns","first_name":"Hilke","full_name":"Oltmanns, Hilke"},{"first_name":"Manfred","full_name":"Kietzmann, Manfred","last_name":"Kietzmann"},{"last_name":"Meißner","first_name":"Jessica","full_name":"Meißner, Jessica"},{"full_name":"Hein, Maxwell","first_name":"Maxwell","id":"52771","last_name":"Hein","orcid":"0000-0002-3732-2236"},{"last_name":"Pramanik","first_name":"Sudipta","full_name":"Pramanik, Sudipta"},{"first_name":"Kay-Peter","full_name":"Hoyer, Kay-Peter","id":"48411","last_name":"Hoyer"},{"last_name":"Schaper","id":"43720","first_name":"Mirko","full_name":"Schaper, Mirko"},{"last_name":"Nienhaus","full_name":"Nienhaus, Alexander","first_name":"Alexander"},{"last_name":"Thomann","full_name":"Thomann, Carl Arne","first_name":"Carl Arne"},{"last_name":"Debus","first_name":"Jörg","full_name":"Debus, Jörg"}],"title":"Tribo-mechanical properties and biocompatibility of Ag-containing amorphous carbon films deposited onto Ti6Al4V","doi":"10.1016/j.surfcoat.2021.127384","intvolume":" 421","keyword":["Materials Chemistry","Surfaces","Coatings and Films","Surfaces and Interfaces","Condensed Matter Physics","General Chemistry"],"publication_status":"published","user_id":"43720","citation":{"ieee":"W. Tillmann et al., “Tribo-mechanical properties and biocompatibility of Ag-containing amorphous carbon films deposited onto Ti6Al4V,” Surface and Coatings Technology, vol. 421, Art. no. 127384, 2021, doi: 10.1016/j.surfcoat.2021.127384.","short":"W. Tillmann, N.F. Lopes Dias, C. Franke, D. Kokalj, D. Stangier, V. Filor, R.H. Mateus-Vargas, H. Oltmanns, M. Kietzmann, J. Meißner, M. Hein, S. Pramanik, K.-P. Hoyer, M. Schaper, A. Nienhaus, C.A. Thomann, J. Debus, Surface and Coatings Technology 421 (2021).","chicago":"Tillmann, Wolfgang, Nelson Filipe Lopes Dias, Carlo Franke, David Kokalj, Dominic Stangier, Viviane Filor, Rafael Hernán Mateus-Vargas, et al. “Tribo-Mechanical Properties and Biocompatibility of Ag-Containing Amorphous Carbon Films Deposited onto Ti6Al4V.” Surface and Coatings Technology 421 (2021). https://doi.org/10.1016/j.surfcoat.2021.127384.","apa":"Tillmann, W., Lopes Dias, N. F., Franke, C., Kokalj, D., Stangier, D., Filor, V., Mateus-Vargas, R. H., Oltmanns, H., Kietzmann, M., Meißner, J., Hein, M., Pramanik, S., Hoyer, K.-P., Schaper, M., Nienhaus, A., Thomann, C. A., & Debus, J. (2021). Tribo-mechanical properties and biocompatibility of Ag-containing amorphous carbon films deposited onto Ti6Al4V. Surface and Coatings Technology, 421, Article 127384. https://doi.org/10.1016/j.surfcoat.2021.127384","ama":"Tillmann W, Lopes Dias NF, Franke C, et al. Tribo-mechanical properties and biocompatibility of Ag-containing amorphous carbon films deposited onto Ti6Al4V. Surface and Coatings Technology. 2021;421. doi:10.1016/j.surfcoat.2021.127384","bibtex":"@article{Tillmann_Lopes Dias_Franke_Kokalj_Stangier_Filor_Mateus-Vargas_Oltmanns_Kietzmann_Meißner_et al._2021, title={Tribo-mechanical properties and biocompatibility of Ag-containing amorphous carbon films deposited onto Ti6Al4V}, volume={421}, DOI={10.1016/j.surfcoat.2021.127384}, number={127384}, journal={Surface and Coatings Technology}, publisher={Elsevier BV}, author={Tillmann, Wolfgang and Lopes Dias, Nelson Filipe and Franke, Carlo and Kokalj, David and Stangier, Dominic and Filor, Viviane and Mateus-Vargas, Rafael Hernán and Oltmanns, Hilke and Kietzmann, Manfred and Meißner, Jessica and et al.}, year={2021} }","mla":"Tillmann, Wolfgang, et al. “Tribo-Mechanical Properties and Biocompatibility of Ag-Containing Amorphous Carbon Films Deposited onto Ti6Al4V.” Surface and Coatings Technology, vol. 421, 127384, Elsevier BV, 2021, doi:10.1016/j.surfcoat.2021.127384."},"department":[{"_id":"9"},{"_id":"158"}],"publisher":"Elsevier BV","date_created":"2023-02-02T14:35:21Z","publication":"Surface and Coatings Technology","quality_controlled":"1","status":"public","language":[{"iso":"eng"}],"publication_identifier":{"issn":["0257-8972"]},"type":"journal_article","year":"2021","volume":421,"_id":"41516","date_updated":"2023-06-01T14:33:50Z","article_number":"127384"},{"publisher":"Elsevier BV","quality_controlled":"1","publication":"Materials Science and Engineering: A","date_created":"2023-02-02T14:33:52Z","status":"public","publication_identifier":{"issn":["0921-5093"]},"year":"2021","type":"journal_article","language":[{"iso":"eng"}],"volume":822,"_id":"41512","date_updated":"2023-06-01T14:35:26Z","article_number":"141662","author":[{"first_name":"Anatolii","full_name":"Andreiev, Anatolii","id":"50215","last_name":"Andreiev"},{"full_name":"Hoyer, Kay-Peter","first_name":"Kay-Peter","last_name":"Hoyer","id":"48411"},{"last_name":"Dula","first_name":"Dimitri","full_name":"Dula, Dimitri"},{"full_name":"Hengsbach, Florian","first_name":"Florian","last_name":"Hengsbach"},{"id":"43822","last_name":"Grydin","first_name":"Olexandr","full_name":"Grydin, Olexandr"},{"last_name":"Frolov","first_name":"Yaroslav","full_name":"Frolov, Yaroslav"},{"first_name":"Mirko","full_name":"Schaper, Mirko","last_name":"Schaper","id":"43720"}],"title":"Laser beam melting of functionally graded materials with application-adapted tailoring of magnetic and mechanical performance","intvolume":" 822","doi":"10.1016/j.msea.2021.141662","user_id":"43720","publication_status":"published","keyword":["Mechanical Engineering","Mechanics of Materials","Condensed Matter Physics","General Materials Science"],"citation":{"bibtex":"@article{Andreiev_Hoyer_Dula_Hengsbach_Grydin_Frolov_Schaper_2021, title={Laser beam melting of functionally graded materials with application-adapted tailoring of magnetic and mechanical performance}, volume={822}, DOI={10.1016/j.msea.2021.141662}, number={141662}, journal={Materials Science and Engineering: A}, publisher={Elsevier BV}, author={Andreiev, Anatolii and Hoyer, Kay-Peter and Dula, Dimitri and Hengsbach, Florian and Grydin, Olexandr and Frolov, Yaroslav and Schaper, Mirko}, year={2021} }","mla":"Andreiev, Anatolii, et al. “Laser Beam Melting of Functionally Graded Materials with Application-Adapted Tailoring of Magnetic and Mechanical Performance.” Materials Science and Engineering: A, vol. 822, 141662, Elsevier BV, 2021, doi:10.1016/j.msea.2021.141662.","short":"A. Andreiev, K.-P. Hoyer, D. Dula, F. Hengsbach, O. Grydin, Y. Frolov, M. Schaper, Materials Science and Engineering: A 822 (2021).","apa":"Andreiev, A., Hoyer, K.-P., Dula, D., Hengsbach, F., Grydin, O., Frolov, Y., & Schaper, M. (2021). Laser beam melting of functionally graded materials with application-adapted tailoring of magnetic and mechanical performance. Materials Science and Engineering: A, 822, Article 141662. https://doi.org/10.1016/j.msea.2021.141662","ama":"Andreiev A, Hoyer K-P, Dula D, et al. Laser beam melting of functionally graded materials with application-adapted tailoring of magnetic and mechanical performance. Materials Science and Engineering: A. 2021;822. doi:10.1016/j.msea.2021.141662","ieee":"A. Andreiev et al., “Laser beam melting of functionally graded materials with application-adapted tailoring of magnetic and mechanical performance,” Materials Science and Engineering: A, vol. 822, Art. no. 141662, 2021, doi: 10.1016/j.msea.2021.141662.","chicago":"Andreiev, Anatolii, Kay-Peter Hoyer, Dimitri Dula, Florian Hengsbach, Olexandr Grydin, Yaroslav Frolov, and Mirko Schaper. “Laser Beam Melting of Functionally Graded Materials with Application-Adapted Tailoring of Magnetic and Mechanical Performance.” Materials Science and Engineering: A 822 (2021). https://doi.org/10.1016/j.msea.2021.141662."},"department":[{"_id":"9"},{"_id":"158"}]},{"department":[{"_id":"9"},{"_id":"158"}],"citation":{"chicago":"Pramanik, Sudipta, Anatolii Andreiev, Kay-Peter Hoyer, and Mirko Schaper. “Quasi In-Situ Analysis of Fracture Path during Cyclic Loading of Double-Edged U Notched Additively Manufactured FeCo Alloy.” International Journal of Fatigue 153 (2021). https://doi.org/10.1016/j.ijfatigue.2021.106498.","ieee":"S. Pramanik, A. Andreiev, K.-P. Hoyer, and M. Schaper, “Quasi in-situ analysis of fracture path during cyclic loading of double-edged U notched additively manufactured FeCo alloy,” International Journal of Fatigue, vol. 153, Art. no. 106498, 2021, doi: 10.1016/j.ijfatigue.2021.106498.","apa":"Pramanik, S., Andreiev, A., Hoyer, K.-P., & Schaper, M. (2021). Quasi in-situ analysis of fracture path during cyclic loading of double-edged U notched additively manufactured FeCo alloy. International Journal of Fatigue, 153, Article 106498. https://doi.org/10.1016/j.ijfatigue.2021.106498","ama":"Pramanik S, Andreiev A, Hoyer K-P, Schaper M. Quasi in-situ analysis of fracture path during cyclic loading of double-edged U notched additively manufactured FeCo alloy. International Journal of Fatigue. 2021;153. doi:10.1016/j.ijfatigue.2021.106498","short":"S. Pramanik, A. Andreiev, K.-P. Hoyer, M. Schaper, International Journal of Fatigue 153 (2021).","mla":"Pramanik, Sudipta, et al. “Quasi In-Situ Analysis of Fracture Path during Cyclic Loading of Double-Edged U Notched Additively Manufactured FeCo Alloy.” International Journal of Fatigue, vol. 153, 106498, Elsevier BV, 2021, doi:10.1016/j.ijfatigue.2021.106498.","bibtex":"@article{Pramanik_Andreiev_Hoyer_Schaper_2021, title={Quasi in-situ analysis of fracture path during cyclic loading of double-edged U notched additively manufactured FeCo alloy}, volume={153}, DOI={10.1016/j.ijfatigue.2021.106498}, number={106498}, journal={International Journal of Fatigue}, publisher={Elsevier BV}, author={Pramanik, Sudipta and Andreiev, Anatolii and Hoyer, Kay-Peter and Schaper, Mirko}, year={2021} }"},"publication_status":"published","keyword":["Industrial and Manufacturing Engineering","Mechanical Engineering","Mechanics of Materials","General Materials Science","Modeling and Simulation"],"user_id":"43720","intvolume":" 153","doi":"10.1016/j.ijfatigue.2021.106498","title":"Quasi in-situ analysis of fracture path during cyclic loading of double-edged U notched additively manufactured FeCo alloy","author":[{"last_name":"Pramanik","full_name":"Pramanik, Sudipta","first_name":"Sudipta"},{"last_name":"Andreiev","id":"50215","first_name":"Anatolii","full_name":"Andreiev, Anatolii"},{"full_name":"Hoyer, Kay-Peter","first_name":"Kay-Peter","last_name":"Hoyer","id":"48411"},{"first_name":"Mirko","full_name":"Schaper, Mirko","id":"43720","last_name":"Schaper"}],"article_number":"106498","date_updated":"2023-06-01T14:35:13Z","_id":"41510","volume":153,"language":[{"iso":"eng"}],"publication_identifier":{"issn":["0142-1123"]},"year":"2021","type":"journal_article","status":"public","date_created":"2023-02-02T14:33:05Z","quality_controlled":"1","publication":"International Journal of Fatigue","publisher":"Elsevier BV"},{"keyword":["Mechanical Engineering","Mechanics of Materials","Condensed Matter Physics","General Materials Science"],"user_id":"43720","title":"Bioresorbable AgCe and AgCeLa alloys for adapted Fe-based implants","doi":"10.1016/j.matlet.2021.130890","volume":306,"article_number":"130890","publication":"Materials Letters","quality_controlled":"1","type":"journal_article","publication_status":"published","citation":{"ieee":"J. T. Krüger, K.-P. Hoyer, and M. Schaper, “Bioresorbable AgCe and AgCeLa alloys for adapted Fe-based implants,” Materials Letters, vol. 306, Art. no. 130890, 2021, doi: 10.1016/j.matlet.2021.130890.","short":"J.T. Krüger, K.-P. Hoyer, M. Schaper, Materials Letters 306 (2021).","chicago":"Krüger, Jan Tobias, Kay-Peter Hoyer, and Mirko Schaper. “Bioresorbable AgCe and AgCeLa Alloys for Adapted Fe-Based Implants.” Materials Letters 306 (2021). https://doi.org/10.1016/j.matlet.2021.130890.","bibtex":"@article{Krüger_Hoyer_Schaper_2021, title={Bioresorbable AgCe and AgCeLa alloys for adapted Fe-based implants}, volume={306}, DOI={10.1016/j.matlet.2021.130890}, number={130890}, journal={Materials Letters}, publisher={Elsevier BV}, author={Krüger, Jan Tobias and Hoyer, Kay-Peter and Schaper, Mirko}, year={2021} }","ama":"Krüger JT, Hoyer K-P, Schaper M. Bioresorbable AgCe and AgCeLa alloys for adapted Fe-based implants. Materials Letters. 2021;306. doi:10.1016/j.matlet.2021.130890","apa":"Krüger, J. T., Hoyer, K.-P., & Schaper, M. (2021). Bioresorbable AgCe and AgCeLa alloys for adapted Fe-based implants. Materials Letters, 306, Article 130890. https://doi.org/10.1016/j.matlet.2021.130890","mla":"Krüger, Jan Tobias, et al. “Bioresorbable AgCe and AgCeLa Alloys for Adapted Fe-Based Implants.” Materials Letters, vol. 306, 130890, Elsevier BV, 2021, doi:10.1016/j.matlet.2021.130890."},"department":[{"_id":"9"},{"_id":"158"}],"author":[{"orcid":"0000-0002-0827-9654","first_name":"Jan Tobias","full_name":"Krüger, Jan Tobias","last_name":"Krüger","id":"44307"},{"last_name":"Hoyer","id":"48411","first_name":"Kay-Peter","full_name":"Hoyer, Kay-Peter"},{"id":"43720","last_name":"Schaper","full_name":"Schaper, Mirko","first_name":"Mirko"}],"intvolume":" 306","_id":"41509","date_updated":"2023-06-01T14:34:08Z","publisher":"Elsevier BV","date_created":"2023-02-02T14:32:48Z","status":"public","language":[{"iso":"eng"}],"year":"2021","publication_identifier":{"issn":["0167-577X"]}},{"publisher":"Springer Science and Business Media LLC","date_created":"2023-02-02T14:39:53Z","status":"public","language":[{"iso":"eng"}],"year":"2021","publication_identifier":{"issn":["1059-9495","1544-1024"]},"_id":"41517","date_updated":"2023-06-01T14:36:06Z","author":[{"last_name":"Pramanik","full_name":"Pramanik, Sudipta","first_name":"Sudipta"},{"last_name":"Tasche","id":"71508","full_name":"Tasche, Lennart","first_name":"Lennart"},{"first_name":"Kay-Peter","full_name":"Hoyer, Kay-Peter","last_name":"Hoyer","id":"48411"},{"id":"43720","last_name":"Schaper","full_name":"Schaper, Mirko","first_name":"Mirko"}],"intvolume":" 30","publication_status":"published","citation":{"short":"S. Pramanik, L. Tasche, K.-P. Hoyer, M. Schaper, Journal of Materials Engineering and Performance 30 (2021) 8048–8056.","mla":"Pramanik, Sudipta, et al. “Correlation between Taylor Model Prediction and Transmission Electron Microscopy-Based Microstructural Investigations of Quasi-In Situ Tensile Deformation of Additively Manufactured FeCo Alloy.” Journal of Materials Engineering and Performance, vol. 30, no. 11, Springer Science and Business Media LLC, 2021, pp. 8048–56, doi:10.1007/s11665-021-06065-9.","bibtex":"@article{Pramanik_Tasche_Hoyer_Schaper_2021, title={Correlation between Taylor Model Prediction and Transmission Electron Microscopy-Based Microstructural Investigations of Quasi-In Situ Tensile Deformation of Additively Manufactured FeCo Alloy}, volume={30}, DOI={10.1007/s11665-021-06065-9}, number={11}, journal={Journal of Materials Engineering and Performance}, publisher={Springer Science and Business Media LLC}, author={Pramanik, Sudipta and Tasche, Lennart and Hoyer, Kay-Peter and Schaper, Mirko}, year={2021}, pages={8048–8056} }","chicago":"Pramanik, Sudipta, Lennart Tasche, Kay-Peter Hoyer, and Mirko Schaper. “Correlation between Taylor Model Prediction and Transmission Electron Microscopy-Based Microstructural Investigations of Quasi-In Situ Tensile Deformation of Additively Manufactured FeCo Alloy.” Journal of Materials Engineering and Performance 30, no. 11 (2021): 8048–56. https://doi.org/10.1007/s11665-021-06065-9.","ieee":"S. Pramanik, L. Tasche, K.-P. Hoyer, and M. Schaper, “Correlation between Taylor Model Prediction and Transmission Electron Microscopy-Based Microstructural Investigations of Quasi-In Situ Tensile Deformation of Additively Manufactured FeCo Alloy,” Journal of Materials Engineering and Performance, vol. 30, no. 11, pp. 8048–8056, 2021, doi: 10.1007/s11665-021-06065-9.","ama":"Pramanik S, Tasche L, Hoyer K-P, Schaper M. Correlation between Taylor Model Prediction and Transmission Electron Microscopy-Based Microstructural Investigations of Quasi-In Situ Tensile Deformation of Additively Manufactured FeCo Alloy. Journal of Materials Engineering and Performance. 2021;30(11):8048-8056. doi:10.1007/s11665-021-06065-9","apa":"Pramanik, S., Tasche, L., Hoyer, K.-P., & Schaper, M. (2021). Correlation between Taylor Model Prediction and Transmission Electron Microscopy-Based Microstructural Investigations of Quasi-In Situ Tensile Deformation of Additively Manufactured FeCo Alloy. Journal of Materials Engineering and Performance, 30(11), 8048–8056. https://doi.org/10.1007/s11665-021-06065-9"},"department":[{"_id":"9"},{"_id":"158"}],"quality_controlled":"1","publication":"Journal of Materials Engineering and Performance","type":"journal_article","volume":30,"page":"8048-8056","issue":"11","title":"Correlation between Taylor Model Prediction and Transmission Electron Microscopy-Based Microstructural Investigations of Quasi-In Situ Tensile Deformation of Additively Manufactured FeCo Alloy","doi":"10.1007/s11665-021-06065-9","abstract":[{"lang":"eng","text":"AbstractWithin this research, the multiscale microstructural evolution before and after the tensile test of a FeCo alloy is addressed. X-ray µ-computer tomography (CT), electron backscattered diffraction (EBSD), and transmission electron microscopy (TEM) are employed to determine the microstructure on different length scales. Microstructural evolution is studied by performing EBSD of the same area before and after the tensile test. As a result, $$\\langle$$\r\n ⟨\r\n 001$$\\rangle$$\r\n ⟩\r\n ||TD, $$\\langle$$\r\n ⟨\r\n 011$$\\rangle$$\r\n ⟩\r\n ||TD are hard orientations and $$\\langle$$\r\n ⟨\r\n 111$$\\rangle$$\r\n ⟩\r\n ||TD is soft orientations for deformation accommodation. It is not possible to predict the deformation of a single grain with the Taylor model. However, the Taylor model accurately predicts the orientation of all grains after deformation. {123}$$\\langle$$\r\n ⟨\r\n 111$$\\rangle$$\r\n ⟩\r\n is the most active slip system, and {112}$$\\langle$$\r\n ⟨\r\n 111$$\\rangle$$\r\n ⟩\r\n is the least active slip system. Both EBSD micrographs show grain subdivision after tensile testing. TEM images show the formation of dislocation cells. Correlative HRTEM images show unresolved lattice fringes at dislocation cell boundaries, whereas resolved lattice fringes are observed at dislocation cell interior. Since Schmid’s law is unable to predict the deformation behavior of grains, the boundary slip transmission accurately predicts the grain deformation behavior."}],"keyword":["Mechanical Engineering","Mechanics of Materials","General Materials Science"],"user_id":"43720"},{"user_id":"43720","oa":"1","keyword":["General Materials Science"],"main_file_link":[{"open_access":"1","url":"https://www.mdpi.com/1996-1944/14/24/7771/htm"}],"abstract":[{"text":"Aluminium steel clad materials have high potential for industrial applications. Their mechanical properties are governed by an intermetallic layer, which forms upon heat treatment at the Al-Fe interface. Transmission electron microscopy was employed to identify the phases present at the interface by selective area electron diffraction and energy dispersive spectroscopy. Three phases were identified: orthorhombic Al5Fe2, monoclinic Al13Fe4 and cubic Al19Fe4MnSi2. An effective interdiffusion coefficient dependent on concentration was determined according to the Boltzmann–Matano method. The highest value of the interdiffusion coefficient was reached at the composition of the intermetallic phases. Afterwards, the process of diffusion considering the evaluated interdiffusion coefficient was simulated using the finite element method. Results of the simulations revealed that growth of the intermetallic phases proceeds preferentially in the direction of aluminium.","lang":"eng"}],"doi":"10.3390/ma14247771","title":"Intermetallic Phases Identification and Diffusion Simulation in Twin-Roll Cast Al-Fe Clad Sheet","article_number":"7771","issue":"24","volume":14,"type":"journal_article","publication":"Materials","quality_controlled":"1","department":[{"_id":"158"}],"citation":{"short":"B. Křivská, M. Šlapáková, J. Veselý, M. Kihoulou, K. Fekete, P. Minárik, R. Králík, O. Grydin, M. Stolbchenko, M. Schaper, Materials 14 (2021).","mla":"Křivská, Barbora, et al. “Intermetallic Phases Identification and Diffusion Simulation in Twin-Roll Cast Al-Fe Clad Sheet.” Materials, vol. 14, no. 24, 7771, MDPI AG, 2021, doi:10.3390/ma14247771.","bibtex":"@article{Křivská_Šlapáková_Veselý_Kihoulou_Fekete_Minárik_Králík_Grydin_Stolbchenko_Schaper_2021, title={Intermetallic Phases Identification and Diffusion Simulation in Twin-Roll Cast Al-Fe Clad Sheet}, volume={14}, DOI={10.3390/ma14247771}, number={247771}, journal={Materials}, publisher={MDPI AG}, author={Křivská, Barbora and Šlapáková, Michaela and Veselý, Jozef and Kihoulou, Martin and Fekete, Klaudia and Minárik, Peter and Králík, Rostislav and Grydin, Olexandr and Stolbchenko, Mykhailo and Schaper, Mirko}, year={2021} }","chicago":"Křivská, Barbora, Michaela Šlapáková, Jozef Veselý, Martin Kihoulou, Klaudia Fekete, Peter Minárik, Rostislav Králík, Olexandr Grydin, Mykhailo Stolbchenko, and Mirko Schaper. “Intermetallic Phases Identification and Diffusion Simulation in Twin-Roll Cast Al-Fe Clad Sheet.” Materials 14, no. 24 (2021). https://doi.org/10.3390/ma14247771.","ieee":"B. Křivská et al., “Intermetallic Phases Identification and Diffusion Simulation in Twin-Roll Cast Al-Fe Clad Sheet,” Materials, vol. 14, no. 24, Art. no. 7771, 2021, doi: 10.3390/ma14247771.","apa":"Křivská, B., Šlapáková, M., Veselý, J., Kihoulou, M., Fekete, K., Minárik, P., Králík, R., Grydin, O., Stolbchenko, M., & Schaper, M. (2021). Intermetallic Phases Identification and Diffusion Simulation in Twin-Roll Cast Al-Fe Clad Sheet. Materials, 14(24), Article 7771. https://doi.org/10.3390/ma14247771","ama":"Křivská B, Šlapáková M, Veselý J, et al. Intermetallic Phases Identification and Diffusion Simulation in Twin-Roll Cast Al-Fe Clad Sheet. Materials. 2021;14(24). doi:10.3390/ma14247771"},"publication_status":"published","intvolume":" 14","author":[{"full_name":"Křivská, Barbora","first_name":"Barbora","last_name":"Křivská"},{"last_name":"Šlapáková","full_name":"Šlapáková, Michaela","first_name":"Michaela"},{"full_name":"Veselý, Jozef","first_name":"Jozef","last_name":"Veselý"},{"full_name":"Kihoulou, Martin","first_name":"Martin","last_name":"Kihoulou"},{"full_name":"Fekete, Klaudia","first_name":"Klaudia","last_name":"Fekete"},{"first_name":"Peter","full_name":"Minárik, Peter","last_name":"Minárik"},{"last_name":"Králík","first_name":"Rostislav","full_name":"Králík, Rostislav"},{"last_name":"Grydin","id":"43822","first_name":"Olexandr","full_name":"Grydin, Olexandr"},{"first_name":"Mykhailo","full_name":"Stolbchenko, Mykhailo","last_name":"Stolbchenko"},{"full_name":"Schaper, Mirko","first_name":"Mirko","last_name":"Schaper","id":"43720"}],"date_updated":"2023-06-01T14:38:18Z","_id":"29815","year":"2021","publication_identifier":{"issn":["1996-1944"]},"language":[{"iso":"eng"}],"status":"public","date_created":"2022-02-11T17:40:03Z","publisher":"MDPI AG"},{"department":[{"_id":"9"},{"_id":"158"}],"citation":{"mla":"Krüger, Jan Tobias, et al. “Novel AgCa and AgCaLa Alloys for Fe-Based Bioresorbable Implants with Adapted Degradation.” Journal of Alloys and Compounds, vol. 871, 159544, Elsevier BV, 2021, doi:10.1016/j.jallcom.2021.159544.","bibtex":"@article{Krüger_Hoyer_Filor_Pramanik_Kietzmann_Meißner_Schaper_2021, title={Novel AgCa and AgCaLa alloys for Fe-based bioresorbable implants with adapted degradation}, volume={871}, DOI={10.1016/j.jallcom.2021.159544}, number={159544}, journal={Journal of Alloys and Compounds}, publisher={Elsevier BV}, author={Krüger, Jan Tobias and Hoyer, Kay-Peter and Filor, Viviane and Pramanik, Sudipta and Kietzmann, Manfred and Meißner, Jessica and Schaper, Mirko}, year={2021} }","short":"J.T. Krüger, K.-P. Hoyer, V. Filor, S. Pramanik, M. Kietzmann, J. Meißner, M. Schaper, Journal of Alloys and Compounds 871 (2021).","apa":"Krüger, J. T., Hoyer, K.-P., Filor, V., Pramanik, S., Kietzmann, M., Meißner, J., & Schaper, M. (2021). Novel AgCa and AgCaLa alloys for Fe-based bioresorbable implants with adapted degradation. Journal of Alloys and Compounds, 871, Article 159544. https://doi.org/10.1016/j.jallcom.2021.159544","ama":"Krüger JT, Hoyer K-P, Filor V, et al. Novel AgCa and AgCaLa alloys for Fe-based bioresorbable implants with adapted degradation. Journal of Alloys and Compounds. 2021;871. doi:10.1016/j.jallcom.2021.159544","chicago":"Krüger, Jan Tobias, Kay-Peter Hoyer, Viviane Filor, Sudipta Pramanik, Manfred Kietzmann, Jessica Meißner, and Mirko Schaper. “Novel AgCa and AgCaLa Alloys for Fe-Based Bioresorbable Implants with Adapted Degradation.” Journal of Alloys and Compounds 871 (2021). https://doi.org/10.1016/j.jallcom.2021.159544.","ieee":"J. T. Krüger et al., “Novel AgCa and AgCaLa alloys for Fe-based bioresorbable implants with adapted degradation,” Journal of Alloys and Compounds, vol. 871, Art. no. 159544, 2021, doi: 10.1016/j.jallcom.2021.159544."},"keyword":["Materials Chemistry","Metals and Alloys","Mechanical Engineering","Mechanics of Materials"],"publication_status":"published","user_id":"43720","intvolume":" 871","doi":"10.1016/j.jallcom.2021.159544","title":"Novel AgCa and AgCaLa alloys for Fe-based bioresorbable implants with adapted degradation","author":[{"orcid":"0000-0002-0827-9654","id":"44307","last_name":"Krüger","full_name":"Krüger, Jan Tobias","first_name":"Jan Tobias"},{"last_name":"Hoyer","id":"48411","full_name":"Hoyer, Kay-Peter","first_name":"Kay-Peter"},{"last_name":"Filor","first_name":"Viviane","full_name":"Filor, Viviane"},{"last_name":"Pramanik","full_name":"Pramanik, Sudipta","first_name":"Sudipta"},{"last_name":"Kietzmann","full_name":"Kietzmann, Manfred","first_name":"Manfred"},{"last_name":"Meißner","full_name":"Meißner, Jessica","first_name":"Jessica"},{"last_name":"Schaper","id":"43720","full_name":"Schaper, Mirko","first_name":"Mirko"}],"article_number":"159544","date_updated":"2023-06-01T14:35:36Z","_id":"41514","volume":871,"language":[{"iso":"eng"}],"year":"2021","publication_identifier":{"issn":["0925-8388"]},"type":"journal_article","status":"public","date_created":"2023-02-02T14:34:42Z","publication":"Journal of Alloys and Compounds","quality_controlled":"1","publisher":"Elsevier BV"},{"volume":46,"article_number":"102087","publication":"Additive Manufacturing","quality_controlled":"1","type":"journal_article","user_id":"43720","keyword":["Industrial and Manufacturing Engineering","Engineering (miscellaneous)","General Materials Science","Biomedical Engineering"],"title":"Investigating the microstructure of an additively manufactured FeCo alloy: an electron microscopy study","doi":"10.1016/j.addma.2021.102087","_id":"41515","date_updated":"2023-06-01T14:35:58Z","date_created":"2023-02-02T14:35:02Z","publisher":"Elsevier BV","year":"2021","publication_identifier":{"issn":["2214-8604"]},"language":[{"iso":"eng"}],"status":"public","citation":{"ieee":"S. Pramanik, L. Tasche, K.-P. Hoyer, and M. Schaper, “Investigating the microstructure of an additively manufactured FeCo alloy: an electron microscopy study,” Additive Manufacturing, vol. 46, Art. no. 102087, 2021, doi: 10.1016/j.addma.2021.102087.","chicago":"Pramanik, Sudipta, Lennart Tasche, Kay-Peter Hoyer, and Mirko Schaper. “Investigating the Microstructure of an Additively Manufactured FeCo Alloy: An Electron Microscopy Study.” Additive Manufacturing 46 (2021). https://doi.org/10.1016/j.addma.2021.102087.","ama":"Pramanik S, Tasche L, Hoyer K-P, Schaper M. Investigating the microstructure of an additively manufactured FeCo alloy: an electron microscopy study. Additive Manufacturing. 2021;46. doi:10.1016/j.addma.2021.102087","apa":"Pramanik, S., Tasche, L., Hoyer, K.-P., & Schaper, M. (2021). Investigating the microstructure of an additively manufactured FeCo alloy: an electron microscopy study. Additive Manufacturing, 46, Article 102087. https://doi.org/10.1016/j.addma.2021.102087","short":"S. Pramanik, L. Tasche, K.-P. Hoyer, M. Schaper, Additive Manufacturing 46 (2021).","bibtex":"@article{Pramanik_Tasche_Hoyer_Schaper_2021, title={Investigating the microstructure of an additively manufactured FeCo alloy: an electron microscopy study}, volume={46}, DOI={10.1016/j.addma.2021.102087}, number={102087}, journal={Additive Manufacturing}, publisher={Elsevier BV}, author={Pramanik, Sudipta and Tasche, Lennart and Hoyer, Kay-Peter and Schaper, Mirko}, year={2021} }","mla":"Pramanik, Sudipta, et al. “Investigating the Microstructure of an Additively Manufactured FeCo Alloy: An Electron Microscopy Study.” Additive Manufacturing, vol. 46, 102087, Elsevier BV, 2021, doi:10.1016/j.addma.2021.102087."},"publication_status":"published","department":[{"_id":"9"},{"_id":"158"}],"author":[{"first_name":"Sudipta","full_name":"Pramanik, Sudipta","last_name":"Pramanik"},{"full_name":"Tasche, Lennart","first_name":"Lennart","last_name":"Tasche","id":"71508"},{"full_name":"Hoyer, Kay-Peter","first_name":"Kay-Peter","last_name":"Hoyer","id":"48411"},{"last_name":"Schaper","id":"43720","full_name":"Schaper, Mirko","first_name":"Mirko"}],"intvolume":" 46"},{"date_created":"2022-03-18T10:12:15Z","publication":"IEEE Access","publisher":"Institute of Electrical and Electronics Engineers (IEEE)","language":[{"iso":"eng"}],"publication_identifier":{"issn":["2169-3536"]},"year":"2021","type":"journal_article","status":"public","_id":"30372","page":"118861-118870","volume":9,"date_updated":"2023-06-23T09:24:06Z","title":"I-AID: Identifying Actionable Information From Disaster-Related Tweets","author":[{"full_name":"Zahera, H.M.A","first_name":"H.M.A","last_name":"Zahera"},{"first_name":"Rricha","full_name":"Jalota, Rricha","last_name":"Jalota"},{"last_name":"Sherif","full_name":"Sherif, Mohamed Ahmed","first_name":"Mohamed Ahmed"},{"last_name":"Ngomo","first_name":"Axel-Cyrille Ngonga","full_name":"Ngomo, Axel-Cyrille Ngonga"}],"doi":"10.1109/access.2021.3107812","intvolume":" 9","citation":{"short":"H.M.A. Zahera, R. Jalota, M.A. Sherif, A.-C.N. Ngomo, IEEE Access 9 (2021) 118861–118870.","bibtex":"@article{Zahera_Jalota_Sherif_Ngomo_2021, title={I-AID: Identifying Actionable Information From Disaster-Related Tweets}, volume={9}, DOI={10.1109/access.2021.3107812}, journal={IEEE Access}, publisher={Institute of Electrical and Electronics Engineers (IEEE)}, author={Zahera, H.M.A and Jalota, Rricha and Sherif, Mohamed Ahmed and Ngomo, Axel-Cyrille Ngonga}, year={2021}, pages={118861–118870} }","mla":"Zahera, H. M. A., et al. “I-AID: Identifying Actionable Information From Disaster-Related Tweets.” IEEE Access, vol. 9, Institute of Electrical and Electronics Engineers (IEEE), 2021, pp. 118861–70, doi:10.1109/access.2021.3107812.","ieee":"H. M. A. Zahera, R. Jalota, M. A. Sherif, and A.-C. N. Ngomo, “I-AID: Identifying Actionable Information From Disaster-Related Tweets,” IEEE Access, vol. 9, pp. 118861–118870, 2021, doi: 10.1109/access.2021.3107812.","chicago":"Zahera, H.M.A, Rricha Jalota, Mohamed Ahmed Sherif, and Axel-Cyrille Ngonga Ngomo. “I-AID: Identifying Actionable Information From Disaster-Related Tweets.” IEEE Access 9 (2021): 118861–70. https://doi.org/10.1109/access.2021.3107812.","apa":"Zahera, H. M. A., Jalota, R., Sherif, M. A., & Ngomo, A.-C. N. (2021). I-AID: Identifying Actionable Information From Disaster-Related Tweets. IEEE Access, 9, 118861–118870. https://doi.org/10.1109/access.2021.3107812","ama":"Zahera HMA, Jalota R, Sherif MA, Ngomo A-CN. I-AID: Identifying Actionable Information From Disaster-Related Tweets. IEEE Access. 2021;9:118861-118870. doi:10.1109/access.2021.3107812"},"keyword":["General Engineering","General Materials Science","General Computer Science"],"publication_status":"published","user_id":"72768"},{"volume":48,"page":"5759-5765","issue":"4","publication":"Ceramics International","type":"journal_article","user_id":"100383","keyword":["Materials Chemistry","Surfaces","Coatings and Films","Process Chemistry and Technology","Ceramics and Composites","Electronic","Optical and Magnetic Materials"],"extern":"1","title":"A composite consisting of intermetallic Ni3Fe and nitrogen-doped carbon for electrocatalytic water oxidation: The effect of increased pyridinic nitrogen dopant","doi":"10.1016/j.ceramint.2021.11.123","_id":"46013","date_updated":"2023-07-11T16:38:54Z","publisher":"Elsevier BV","date_created":"2023-07-11T14:50:54Z","status":"public","year":"2021","publication_identifier":{"issn":["0272-8842"]},"language":[{"iso":"eng"}],"publication_status":"published","citation":{"chicago":"Liu, Dan, Haichao Zhai, Jie Hu, Ying Pan, Gengsheng Xu, Chuhong Zhu, and Yupeng Yuan. “A Composite Consisting of Intermetallic Ni3Fe and Nitrogen-Doped Carbon for Electrocatalytic Water Oxidation: The Effect of Increased Pyridinic Nitrogen Dopant.” Ceramics International 48, no. 4 (2021): 5759–65. https://doi.org/10.1016/j.ceramint.2021.11.123.","short":"D. Liu, H. Zhai, J. Hu, Y. Pan, G. Xu, C. Zhu, Y. Yuan, Ceramics International 48 (2021) 5759–5765.","ieee":"D. Liu et al., “A composite consisting of intermetallic Ni3Fe and nitrogen-doped carbon for electrocatalytic water oxidation: The effect of increased pyridinic nitrogen dopant,” Ceramics International, vol. 48, no. 4, pp. 5759–5765, 2021, doi: 10.1016/j.ceramint.2021.11.123.","mla":"Liu, Dan, et al. “A Composite Consisting of Intermetallic Ni3Fe and Nitrogen-Doped Carbon for Electrocatalytic Water Oxidation: The Effect of Increased Pyridinic Nitrogen Dopant.” Ceramics International, vol. 48, no. 4, Elsevier BV, 2021, pp. 5759–65, doi:10.1016/j.ceramint.2021.11.123.","ama":"Liu D, Zhai H, Hu J, et al. A composite consisting of intermetallic Ni3Fe and nitrogen-doped carbon for electrocatalytic water oxidation: The effect of increased pyridinic nitrogen dopant. Ceramics International. 2021;48(4):5759-5765. doi:10.1016/j.ceramint.2021.11.123","bibtex":"@article{Liu_Zhai_Hu_Pan_Xu_Zhu_Yuan_2021, title={A composite consisting of intermetallic Ni3Fe and nitrogen-doped carbon for electrocatalytic water oxidation: The effect of increased pyridinic nitrogen dopant}, volume={48}, DOI={10.1016/j.ceramint.2021.11.123}, number={4}, journal={Ceramics International}, publisher={Elsevier BV}, author={Liu, Dan and Zhai, Haichao and Hu, Jie and Pan, Ying and Xu, Gengsheng and Zhu, Chuhong and Yuan, Yupeng}, year={2021}, pages={5759–5765} }","apa":"Liu, D., Zhai, H., Hu, J., Pan, Y., Xu, G., Zhu, C., & Yuan, Y. (2021). A composite consisting of intermetallic Ni3Fe and nitrogen-doped carbon for electrocatalytic water oxidation: The effect of increased pyridinic nitrogen dopant. Ceramics International, 48(4), 5759–5765. https://doi.org/10.1016/j.ceramint.2021.11.123"},"author":[{"full_name":"Liu, Dan","first_name":"Dan","last_name":"Liu"},{"full_name":"Zhai, Haichao","first_name":"Haichao","last_name":"Zhai"},{"last_name":"Hu","full_name":"Hu, Jie","first_name":"Jie"},{"last_name":"Pan","id":"100383","full_name":"Pan, Ying","first_name":"Ying"},{"first_name":"Gengsheng","full_name":"Xu, Gengsheng","last_name":"Xu"},{"last_name":"Zhu","first_name":"Chuhong","full_name":"Zhu, Chuhong"},{"first_name":"Yupeng","full_name":"Yuan, Yupeng","last_name":"Yuan"}],"intvolume":" 48"},{"date_created":"2023-07-11T14:49:16Z","publisher":"American Chemical Society (ACS)","publication_identifier":{"issn":["2643-6728","2643-6728"]},"year":"2021","language":[{"iso":"eng"}],"status":"public","_id":"46007","date_updated":"2023-07-11T16:38:43Z","author":[{"last_name":"Zhai","full_name":"Zhai, Qingfeng","first_name":"Qingfeng"},{"id":"100383","last_name":"Pan","first_name":"Ying","full_name":"Pan, Ying"},{"last_name":"Dai","full_name":"Dai, Liming","first_name":"Liming"}],"intvolume":" 2","citation":{"mla":"Zhai, Qingfeng, et al. “Carbon-Based Metal-Free Electrocatalysts: Past, Present, and Future.” Accounts of Materials Research, vol. 2, no. 12, American Chemical Society (ACS), 2021, pp. 1239–50, doi:10.1021/accountsmr.1c00190.","bibtex":"@article{Zhai_Pan_Dai_2021, title={Carbon-Based Metal-Free Electrocatalysts: Past, Present, and Future}, volume={2}, DOI={10.1021/accountsmr.1c00190}, number={12}, journal={Accounts of Materials Research}, publisher={American Chemical Society (ACS)}, author={Zhai, Qingfeng and Pan, Ying and Dai, Liming}, year={2021}, pages={1239–1250} }","short":"Q. Zhai, Y. Pan, L. Dai, Accounts of Materials Research 2 (2021) 1239–1250.","apa":"Zhai, Q., Pan, Y., & Dai, L. (2021). Carbon-Based Metal-Free Electrocatalysts: Past, Present, and Future. Accounts of Materials Research, 2(12), 1239–1250. https://doi.org/10.1021/accountsmr.1c00190","ama":"Zhai Q, Pan Y, Dai L. Carbon-Based Metal-Free Electrocatalysts: Past, Present, and Future. Accounts of Materials Research. 2021;2(12):1239-1250. doi:10.1021/accountsmr.1c00190","chicago":"Zhai, Qingfeng, Ying Pan, and Liming Dai. “Carbon-Based Metal-Free Electrocatalysts: Past, Present, and Future.” Accounts of Materials Research 2, no. 12 (2021): 1239–50. https://doi.org/10.1021/accountsmr.1c00190.","ieee":"Q. Zhai, Y. Pan, and L. Dai, “Carbon-Based Metal-Free Electrocatalysts: Past, Present, and Future,” Accounts of Materials Research, vol. 2, no. 12, pp. 1239–1250, 2021, doi: 10.1021/accountsmr.1c00190."},"publication_status":"published","publication":"Accounts of Materials Research","type":"journal_article","page":"1239-1250","volume":2,"issue":"12","title":"Carbon-Based Metal-Free Electrocatalysts: Past, Present, and Future","extern":"1","doi":"10.1021/accountsmr.1c00190","user_id":"100383","keyword":["Materials Chemistry","Polymers and Plastics","Materials Science (miscellaneous)","Chemical Engineering (miscellaneous)"]},{"date_updated":"2023-07-11T16:54:28Z","_id":"46017","publication_identifier":{"issn":["1530-6984","1530-6992"]},"year":"2021","language":[{"iso":"eng"}],"status":"public","date_created":"2023-07-11T16:48:45Z","publisher":"American Chemical Society (ACS)","citation":{"mla":"Zhang, Dawei, et al. “Anisotropic Ion Migration and Electronic Conduction in van Der Waals Ferroelectric CuInP2S6.” Nano Letters, vol. 21, no. 2, American Chemical Society (ACS), 2021, pp. 995–1002, doi:10.1021/acs.nanolett.0c04023.","bibtex":"@article{Zhang_Luo_Yao_Schoenherr_Sha_Pan_Sharma_Alexe_Seidel_2021, title={Anisotropic Ion Migration and Electronic Conduction in van der Waals Ferroelectric CuInP2S6}, volume={21}, DOI={10.1021/acs.nanolett.0c04023}, number={2}, journal={Nano Letters}, publisher={American Chemical Society (ACS)}, author={Zhang, Dawei and Luo, Zheng-Dong and Yao, Yin and Schoenherr, Peggy and Sha, Chuhan and Pan, Ying and Sharma, Pankaj and Alexe, Marin and Seidel, Jan}, year={2021}, pages={995–1002} }","short":"D. Zhang, Z.-D. Luo, Y. Yao, P. Schoenherr, C. Sha, Y. Pan, P. Sharma, M. Alexe, J. Seidel, Nano Letters 21 (2021) 995–1002.","ama":"Zhang D, Luo Z-D, Yao Y, et al. Anisotropic Ion Migration and Electronic Conduction in van der Waals Ferroelectric CuInP2S6. Nano Letters. 2021;21(2):995-1002. doi:10.1021/acs.nanolett.0c04023","apa":"Zhang, D., Luo, Z.-D., Yao, Y., Schoenherr, P., Sha, C., Pan, Y., Sharma, P., Alexe, M., & Seidel, J. (2021). Anisotropic Ion Migration and Electronic Conduction in van der Waals Ferroelectric CuInP2S6. Nano Letters, 21(2), 995–1002. https://doi.org/10.1021/acs.nanolett.0c04023","chicago":"Zhang, Dawei, Zheng-Dong Luo, Yin Yao, Peggy Schoenherr, Chuhan Sha, Ying Pan, Pankaj Sharma, Marin Alexe, and Jan Seidel. “Anisotropic Ion Migration and Electronic Conduction in van Der Waals Ferroelectric CuInP2S6.” Nano Letters 21, no. 2 (2021): 995–1002. https://doi.org/10.1021/acs.nanolett.0c04023.","ieee":"D. Zhang et al., “Anisotropic Ion Migration and Electronic Conduction in van der Waals Ferroelectric CuInP2S6,” Nano Letters, vol. 21, no. 2, pp. 995–1002, 2021, doi: 10.1021/acs.nanolett.0c04023."},"publication_status":"published","intvolume":" 21","author":[{"last_name":"Zhang","full_name":"Zhang, Dawei","first_name":"Dawei"},{"first_name":"Zheng-Dong","full_name":"Luo, Zheng-Dong","last_name":"Luo"},{"last_name":"Yao","first_name":"Yin","full_name":"Yao, Yin"},{"last_name":"Schoenherr","full_name":"Schoenherr, Peggy","first_name":"Peggy"},{"first_name":"Chuhan","full_name":"Sha, Chuhan","last_name":"Sha"},{"first_name":"Ying","full_name":"Pan, Ying","last_name":"Pan","id":"100383"},{"first_name":"Pankaj","full_name":"Sharma, Pankaj","last_name":"Sharma"},{"first_name":"Marin","full_name":"Alexe, Marin","last_name":"Alexe"},{"first_name":"Jan","full_name":"Seidel, Jan","last_name":"Seidel"}],"issue":"2","page":"995-1002","volume":21,"type":"journal_article","publication":"Nano Letters","user_id":"100383","keyword":["Mechanical Engineering","Condensed Matter Physics","General Materials Science","General Chemistry","Bioengineering"],"doi":"10.1021/acs.nanolett.0c04023","title":"Anisotropic Ion Migration and Electronic Conduction in van der Waals Ferroelectric CuInP2S6","extern":"1"},{"issue":"6","article_number":"2100002","volume":4,"type":"journal_article","publication":"Advanced Quantum Technologies","user_id":"42514","keyword":["Electrical and Electronic Engineering","Computational Theory and Mathematics","Condensed Matter Physics","Mathematical Physics","Nuclear and High Energy Physics","Electronic","Optical and Magnetic Materials","Statistical and Nonlinear Physics"],"doi":"10.1002/qute.202100002","title":"Bright Electrically Controllable Quantum‐Dot‐Molecule Devices Fabricated by In Situ Electron‐Beam Lithography","date_updated":"2023-07-25T08:46:47Z","_id":"46135","status":"public","year":"2021","publication_identifier":{"issn":["2511-9044","2511-9044"]},"language":[{"iso":"eng"}],"publisher":"Wiley","date_created":"2023-07-25T08:45:57Z","department":[{"_id":"15"},{"_id":"230"}],"publication_status":"published","citation":{"short":"J. Schall, M. Deconinck, N. Bart, M. Florian, M. Helversen, C. Dangel, R. Schmidt, L. Bremer, F. Bopp, I. Hüllen, C. Gies, D. Reuter, A.D. Wieck, S. Rodt, J.J. Finley, F. Jahnke, A. Ludwig, S. Reitzenstein, Advanced Quantum Technologies 4 (2021).","mla":"Schall, Johannes, et al. “Bright Electrically Controllable Quantum‐Dot‐Molecule Devices Fabricated by In Situ Electron‐Beam Lithography.” Advanced Quantum Technologies, vol. 4, no. 6, 2100002, Wiley, 2021, doi:10.1002/qute.202100002.","bibtex":"@article{Schall_Deconinck_Bart_Florian_Helversen_Dangel_Schmidt_Bremer_Bopp_Hüllen_et al._2021, title={Bright Electrically Controllable Quantum‐Dot‐Molecule Devices Fabricated by In Situ Electron‐Beam Lithography}, volume={4}, DOI={10.1002/qute.202100002}, number={62100002}, journal={Advanced Quantum Technologies}, publisher={Wiley}, author={Schall, Johannes and Deconinck, Marielle and Bart, Nikolai and Florian, Matthias and Helversen, Martin and Dangel, Christian and Schmidt, Ronny and Bremer, Lucas and Bopp, Frederik and Hüllen, Isabell and et al.}, year={2021} }","chicago":"Schall, Johannes, Marielle Deconinck, Nikolai Bart, Matthias Florian, Martin Helversen, Christian Dangel, Ronny Schmidt, et al. “Bright Electrically Controllable Quantum‐Dot‐Molecule Devices Fabricated by In Situ Electron‐Beam Lithography.” Advanced Quantum Technologies 4, no. 6 (2021). https://doi.org/10.1002/qute.202100002.","ieee":"J. Schall et al., “Bright Electrically Controllable Quantum‐Dot‐Molecule Devices Fabricated by In Situ Electron‐Beam Lithography,” Advanced Quantum Technologies, vol. 4, no. 6, Art. no. 2100002, 2021, doi: 10.1002/qute.202100002.","ama":"Schall J, Deconinck M, Bart N, et al. Bright Electrically Controllable Quantum‐Dot‐Molecule Devices Fabricated by In Situ Electron‐Beam Lithography. Advanced Quantum Technologies. 2021;4(6). doi:10.1002/qute.202100002","apa":"Schall, J., Deconinck, M., Bart, N., Florian, M., Helversen, M., Dangel, C., Schmidt, R., Bremer, L., Bopp, F., Hüllen, I., Gies, C., Reuter, D., Wieck, A. D., Rodt, S., Finley, J. J., Jahnke, F., Ludwig, A., & Reitzenstein, S. (2021). Bright Electrically Controllable Quantum‐Dot‐Molecule Devices Fabricated by In Situ Electron‐Beam Lithography. Advanced Quantum Technologies, 4(6), Article 2100002. https://doi.org/10.1002/qute.202100002"},"intvolume":" 4","author":[{"first_name":"Johannes","full_name":"Schall, Johannes","last_name":"Schall"},{"full_name":"Deconinck, Marielle","first_name":"Marielle","last_name":"Deconinck"},{"last_name":"Bart","full_name":"Bart, Nikolai","first_name":"Nikolai"},{"last_name":"Florian","full_name":"Florian, Matthias","first_name":"Matthias"},{"last_name":"Helversen","first_name":"Martin","full_name":"Helversen, Martin"},{"first_name":"Christian","full_name":"Dangel, Christian","last_name":"Dangel"},{"first_name":"Ronny","full_name":"Schmidt, Ronny","last_name":"Schmidt"},{"first_name":"Lucas","full_name":"Bremer, Lucas","last_name":"Bremer"},{"first_name":"Frederik","full_name":"Bopp, Frederik","last_name":"Bopp"},{"last_name":"Hüllen","full_name":"Hüllen, Isabell","first_name":"Isabell"},{"last_name":"Gies","first_name":"Christopher","full_name":"Gies, Christopher"},{"first_name":"Dirk","full_name":"Reuter, Dirk","id":"37763","last_name":"Reuter"},{"last_name":"Wieck","first_name":"Andreas D.","full_name":"Wieck, Andreas D."},{"first_name":"Sven","full_name":"Rodt, Sven","last_name":"Rodt"},{"last_name":"Finley","full_name":"Finley, Jonathan J.","first_name":"Jonathan J."},{"last_name":"Jahnke","first_name":"Frank","full_name":"Jahnke, Frank"},{"last_name":"Ludwig","first_name":"Arne","full_name":"Ludwig, Arne"},{"last_name":"Reitzenstein","full_name":"Reitzenstein, Stephan","first_name":"Stephan"}]}]