[{"language":[{"iso":"eng"}],"keyword":["Materials Chemistry","Metals and Alloys","Physical and Theoretical Chemistry","Condensed Matter Physics"],"department":[{"_id":"157"}],"user_id":"5974","_id":"50726","status":"public","abstract":[{"text":"<jats:p>Resistance spot‐welded joints containing press‐hardened steels are seen to exhibit a fracture mode called total dome failure, where the weld nugget completely separates from one steel sheet along the weld nugget edge. The effect of weld nugget shape and material property gradients is studied based on damage mechanics modeling and experimental validation to shed light on the underlying influencing factors. For a three‐steel‐sheet spot‐welded joint combining DP600 (1.5 mm)–CR1900T (1.0 mm)–CR1900T (1.0 mm), experiments under shear loading reveal that fracture occurs in the DP600 sheet along the weld nugget edge. In subsequent numerical simulation studies with damage mechanics models whose parameters are independently calibrated for every involved material configuration, three variations of the geometrical joint configuration are considered—an approximation of the real joint, one variation with a steeper weld nugget shape, and one variation with a less pronounced gradient between weld nugget material and heat‐affected zone material properties. The results of the finite‐element simulations show that a shallower weld nugget and a more pronounced material gradient lead to a faster increase of plastic strain at the edge of the weld nugget and promote the occurrence of total dome failure.</jats:p>","lang":"eng"}],"publication":"steel research international","type":"journal_article","doi":"10.1002/srin.202300530","title":"Influences of Weld Nugget Shape and Material Gradient on the Shear Strength of Resistance Spot‐Welded Joints","date_created":"2024-01-22T09:17:07Z","author":[{"full_name":"Schuster, Lilia","last_name":"Schuster","first_name":"Lilia"},{"first_name":"Viktoria","full_name":"Olfert, Viktoria","id":"5974","last_name":"Olfert"},{"last_name":"Sherepenko","full_name":"Sherepenko, Oleksii","first_name":"Oleksii"},{"first_name":"Clemens","full_name":"Fehrenbach, Clemens","last_name":"Fehrenbach"},{"first_name":"Shiyuan","full_name":"Song, Shiyuan","last_name":"Song"},{"first_name":"David","last_name":"Hein","id":"7728","full_name":"Hein, David"},{"last_name":"Meschut","orcid":"0000-0002-2763-1246","full_name":"Meschut, Gerson","id":"32056","first_name":"Gerson"},{"last_name":"Biro","full_name":"Biro, Elliot","first_name":"Elliot"},{"last_name":"Münstermann","full_name":"Münstermann, Sebastian","first_name":"Sebastian"}],"publisher":"Wiley","date_updated":"2024-03-18T12:49:31Z","citation":{"short":"L. Schuster, V. Olfert, O. Sherepenko, C. Fehrenbach, S. Song, D. Hein, G. Meschut, E. Biro, S. Münstermann, Steel Research International (2024).","mla":"Schuster, Lilia, et al. “Influences of Weld Nugget Shape and Material Gradient on the Shear Strength of Resistance Spot‐Welded Joints.” <i>Steel Research International</i>, Wiley, 2024, doi:<a href=\"https://doi.org/10.1002/srin.202300530\">10.1002/srin.202300530</a>.","bibtex":"@article{Schuster_Olfert_Sherepenko_Fehrenbach_Song_Hein_Meschut_Biro_Münstermann_2024, title={Influences of Weld Nugget Shape and Material Gradient on the Shear Strength of Resistance Spot‐Welded Joints}, DOI={<a href=\"https://doi.org/10.1002/srin.202300530\">10.1002/srin.202300530</a>}, journal={steel research international}, publisher={Wiley}, author={Schuster, Lilia and Olfert, Viktoria and Sherepenko, Oleksii and Fehrenbach, Clemens and Song, Shiyuan and Hein, David and Meschut, Gerson and Biro, Elliot and Münstermann, Sebastian}, year={2024} }","apa":"Schuster, L., Olfert, V., Sherepenko, O., Fehrenbach, C., Song, S., Hein, D., Meschut, G., Biro, E., &#38; Münstermann, S. (2024). Influences of Weld Nugget Shape and Material Gradient on the Shear Strength of Resistance Spot‐Welded Joints. <i>Steel Research International</i>. <a href=\"https://doi.org/10.1002/srin.202300530\">https://doi.org/10.1002/srin.202300530</a>","ieee":"L. Schuster <i>et al.</i>, “Influences of Weld Nugget Shape and Material Gradient on the Shear Strength of Resistance Spot‐Welded Joints,” <i>steel research international</i>, 2024, doi: <a href=\"https://doi.org/10.1002/srin.202300530\">10.1002/srin.202300530</a>.","chicago":"Schuster, Lilia, Viktoria Olfert, Oleksii Sherepenko, Clemens Fehrenbach, Shiyuan Song, David Hein, Gerson Meschut, Elliot Biro, and Sebastian Münstermann. “Influences of Weld Nugget Shape and Material Gradient on the Shear Strength of Resistance Spot‐Welded Joints.” <i>Steel Research International</i>, 2024. <a href=\"https://doi.org/10.1002/srin.202300530\">https://doi.org/10.1002/srin.202300530</a>.","ama":"Schuster L, Olfert V, Sherepenko O, et al. Influences of Weld Nugget Shape and Material Gradient on the Shear Strength of Resistance Spot‐Welded Joints. <i>steel research international</i>. Published online 2024. doi:<a href=\"https://doi.org/10.1002/srin.202300530\">10.1002/srin.202300530</a>"},"year":"2024","quality_controlled":"1","publication_identifier":{"issn":["1611-3683","1869-344X"]},"publication_status":"published"},{"date_created":"2024-03-08T06:27:10Z","publisher":"The Electrochemical Society","title":"Electrochemical Removal of HF from Carbonate-based LiPF6-containing Li-ion Battery Electrolytes","quality_controlled":"1","year":"2024","language":[{"iso":"eng"}],"keyword":["Materials Chemistry","Electrochemistry","Surfaces","Coatings and Films","Condensed Matter Physics","Renewable Energy","Sustainability and the Environment","Electronic","Optical and Magnetic Materials"],"publication":"Journal of The Electrochemical Society","abstract":[{"text":"Due to the hydrolytic instability of LiPF6 in carbonate-based solvents, HF is a typical impurity in Li-ion battery electrolytes. HF significantly influences the performance of Li-ion batteries, for example by impacting the formation of the solid electrolyte interphase at the anode and by affecting transition metal dissolution at the cathode. Additionally, HF complicates studying fundamental interfacial electrochemistry of Li-ion battery electrolytes, such as direct anion reduction, because it is electrocatalytically relatively unstable, resulting in LiF passivation layers. Methods to selectively remove ppm levels of HF from LiPF6-containing carbonate-based electrolytes are limited. We introduce and benchmark a simple yet efficient electrochemical in situ method to selectively remove ppm amounts of HF from LiPF6-containing carbonate-based electrolytes. The basic idea is the application of a suitable potential to a high surface-area metallic electrode upon which only HF reacts (electrocatalytically) while all other electrolyte components are unaffected under the respective conditions.","lang":"eng"}],"author":[{"last_name":"Ge","full_name":"Ge, Xiaokun","first_name":"Xiaokun"},{"full_name":"Huck, Marten","last_name":"Huck","first_name":"Marten"},{"full_name":"Kuhlmann, Andreas","last_name":"Kuhlmann","first_name":"Andreas"},{"first_name":"Michael","last_name":"Tiemann","orcid":"0000-0003-1711-2722","full_name":"Tiemann, Michael","id":"23547"},{"first_name":"Christian","full_name":"Weinberger, Christian","id":"11848","last_name":"Weinberger"},{"first_name":"Xiaodan","full_name":"Xu, Xiaodan","last_name":"Xu"},{"first_name":"Zhenyu","full_name":"Zhao, Zhenyu","last_name":"Zhao"},{"first_name":"Hans-Georg","last_name":"Steinrueck","full_name":"Steinrueck, Hans-Georg"}],"volume":171,"date_updated":"2024-03-25T17:01:09Z","oa":"1","main_file_link":[{"open_access":"1","url":"https://dx.doi.org/10.1149/1945-7111/ad30d3"}],"doi":"10.1149/1945-7111/ad30d3","publication_status":"published","publication_identifier":{"issn":["0013-4651","1945-7111"]},"citation":{"chicago":"Ge, Xiaokun, Marten Huck, Andreas Kuhlmann, Michael Tiemann, Christian Weinberger, Xiaodan Xu, Zhenyu Zhao, and Hans-Georg Steinrueck. “Electrochemical Removal of HF from Carbonate-Based LiPF6-Containing Li-Ion Battery Electrolytes.” <i>Journal of The Electrochemical Society</i> 171 (2024): 030552. <a href=\"https://doi.org/10.1149/1945-7111/ad30d3\">https://doi.org/10.1149/1945-7111/ad30d3</a>.","ieee":"X. Ge <i>et al.</i>, “Electrochemical Removal of HF from Carbonate-based LiPF6-containing Li-ion Battery Electrolytes,” <i>Journal of The Electrochemical Society</i>, vol. 171, p. 030552, 2024, doi: <a href=\"https://doi.org/10.1149/1945-7111/ad30d3\">10.1149/1945-7111/ad30d3</a>.","ama":"Ge X, Huck M, Kuhlmann A, et al. Electrochemical Removal of HF from Carbonate-based LiPF6-containing Li-ion Battery Electrolytes. <i>Journal of The Electrochemical Society</i>. 2024;171:030552. doi:<a href=\"https://doi.org/10.1149/1945-7111/ad30d3\">10.1149/1945-7111/ad30d3</a>","bibtex":"@article{Ge_Huck_Kuhlmann_Tiemann_Weinberger_Xu_Zhao_Steinrueck_2024, title={Electrochemical Removal of HF from Carbonate-based LiPF6-containing Li-ion Battery Electrolytes}, volume={171}, DOI={<a href=\"https://doi.org/10.1149/1945-7111/ad30d3\">10.1149/1945-7111/ad30d3</a>}, journal={Journal of The Electrochemical Society}, publisher={The Electrochemical Society}, author={Ge, Xiaokun and Huck, Marten and Kuhlmann, Andreas and Tiemann, Michael and Weinberger, Christian and Xu, Xiaodan and Zhao, Zhenyu and Steinrueck, Hans-Georg}, year={2024}, pages={030552} }","short":"X. Ge, M. Huck, A. Kuhlmann, M. Tiemann, C. Weinberger, X. Xu, Z. Zhao, H.-G. Steinrueck, Journal of The Electrochemical Society 171 (2024) 030552.","mla":"Ge, Xiaokun, et al. “Electrochemical Removal of HF from Carbonate-Based LiPF6-Containing Li-Ion Battery Electrolytes.” <i>Journal of The Electrochemical Society</i>, vol. 171, The Electrochemical Society, 2024, p. 030552, doi:<a href=\"https://doi.org/10.1149/1945-7111/ad30d3\">10.1149/1945-7111/ad30d3</a>.","apa":"Ge, X., Huck, M., Kuhlmann, A., Tiemann, M., Weinberger, C., Xu, X., Zhao, Z., &#38; Steinrueck, H.-G. (2024). Electrochemical Removal of HF from Carbonate-based LiPF6-containing Li-ion Battery Electrolytes. <i>Journal of The Electrochemical Society</i>, <i>171</i>, 030552. <a href=\"https://doi.org/10.1149/1945-7111/ad30d3\">https://doi.org/10.1149/1945-7111/ad30d3</a>"},"intvolume":"       171","page":"030552","user_id":"23547","department":[{"_id":"35"},{"_id":"2"},{"_id":"307"}],"_id":"52372","article_type":"original","type":"journal_article","status":"public"},{"abstract":[{"lang":"eng","text":"<jats:p>The coupling of structural transitions to heat capacity changes leads to destabilization of macromolecules at both, elevated and lowered temperatures. DNA origami not only exhibit this property but also provide...</jats:p>"}],"status":"public","type":"journal_article","publication":"Chemical Communications","keyword":["Materials Chemistry","Metals and Alloys","Surfaces","Coatings and Films","General Chemistry","Ceramics and Composites","Electronic","Optical and Magnetic Materials","Catalysis"],"language":[{"iso":"eng"}],"_id":"53621","user_id":"48864","department":[{"_id":"302"}],"year":"2024","citation":{"ama":"Dornbusch D, Hanke M, Tomm E, et al. Cold denaturation of DNA origami nanostructures. <i>Chemical Communications</i>. Published online 2024. doi:<a href=\"https://doi.org/10.1039/d3cc05985e\">10.1039/d3cc05985e</a>","chicago":"Dornbusch, Daniel, Marcel Hanke, Emilia Tomm, Charlotte Kielar, Guido Grundmeier, Adrian Keller, and Karim Fahmy. “Cold Denaturation of DNA Origami Nanostructures.” <i>Chemical Communications</i>, 2024. <a href=\"https://doi.org/10.1039/d3cc05985e\">https://doi.org/10.1039/d3cc05985e</a>.","ieee":"D. Dornbusch <i>et al.</i>, “Cold denaturation of DNA origami nanostructures,” <i>Chemical Communications</i>, 2024, doi: <a href=\"https://doi.org/10.1039/d3cc05985e\">10.1039/d3cc05985e</a>.","apa":"Dornbusch, D., Hanke, M., Tomm, E., Kielar, C., Grundmeier, G., Keller, A., &#38; Fahmy, K. (2024). Cold denaturation of DNA origami nanostructures. <i>Chemical Communications</i>. <a href=\"https://doi.org/10.1039/d3cc05985e\">https://doi.org/10.1039/d3cc05985e</a>","bibtex":"@article{Dornbusch_Hanke_Tomm_Kielar_Grundmeier_Keller_Fahmy_2024, title={Cold denaturation of DNA origami nanostructures}, DOI={<a href=\"https://doi.org/10.1039/d3cc05985e\">10.1039/d3cc05985e</a>}, journal={Chemical Communications}, publisher={Royal Society of Chemistry (RSC)}, author={Dornbusch, Daniel and Hanke, Marcel and Tomm, Emilia and Kielar, Charlotte and Grundmeier, Guido and Keller, Adrian and Fahmy, Karim}, year={2024} }","short":"D. Dornbusch, M. Hanke, E. Tomm, C. Kielar, G. Grundmeier, A. Keller, K. Fahmy, Chemical Communications (2024).","mla":"Dornbusch, Daniel, et al. “Cold Denaturation of DNA Origami Nanostructures.” <i>Chemical Communications</i>, Royal Society of Chemistry (RSC), 2024, doi:<a href=\"https://doi.org/10.1039/d3cc05985e\">10.1039/d3cc05985e</a>."},"publication_status":"published","publication_identifier":{"issn":["1359-7345","1364-548X"]},"title":"Cold denaturation of DNA origami nanostructures","doi":"10.1039/d3cc05985e","date_updated":"2024-04-23T08:21:05Z","publisher":"Royal Society of Chemistry (RSC)","author":[{"full_name":"Dornbusch, Daniel","last_name":"Dornbusch","first_name":"Daniel"},{"first_name":"Marcel","last_name":"Hanke","full_name":"Hanke, Marcel"},{"first_name":"Emilia","full_name":"Tomm, Emilia","id":"68157","last_name":"Tomm"},{"first_name":"Charlotte","full_name":"Kielar, Charlotte","last_name":"Kielar"},{"first_name":"Guido","full_name":"Grundmeier, Guido","id":"194","last_name":"Grundmeier"},{"first_name":"Adrian","orcid":"0000-0001-7139-3110","last_name":"Keller","full_name":"Keller, Adrian","id":"48864"},{"full_name":"Fahmy, Karim","last_name":"Fahmy","first_name":"Karim"}],"date_created":"2024-04-23T08:20:05Z"},{"year":"2023","issue":"38","title":"Dynamics-induced charge transfer in semiconducting conjugated polymers","date_created":"2023-12-15T11:49:36Z","publisher":"Royal Society of Chemistry (RSC)","abstract":[{"lang":"eng","text":"<jats:p>Dynamics-induced interchain charge transfer in a polymer aggregate in stack configuration can be understood by single-oligomer polaron energy.</jats:p>"}],"publication":"Journal of Materials Chemistry C","language":[{"iso":"eng"}],"keyword":["Materials Chemistry","General Chemistry"],"citation":{"apa":"Bauch, F., Dong, C.-D., &#38; Schumacher, S. (2023). Dynamics-induced charge transfer in semiconducting conjugated polymers. <i>Journal of Materials Chemistry C</i>, <i>11</i>(38), 12992–12998. <a href=\"https://doi.org/10.1039/d3tc02263c\">https://doi.org/10.1039/d3tc02263c</a>","short":"F. Bauch, C.-D. Dong, S. Schumacher, Journal of Materials Chemistry C 11 (2023) 12992–12998.","mla":"Bauch, Fabian, et al. “Dynamics-Induced Charge Transfer in Semiconducting Conjugated Polymers.” <i>Journal of Materials Chemistry C</i>, vol. 11, no. 38, Royal Society of Chemistry (RSC), 2023, pp. 12992–98, doi:<a href=\"https://doi.org/10.1039/d3tc02263c\">10.1039/d3tc02263c</a>.","bibtex":"@article{Bauch_Dong_Schumacher_2023, title={Dynamics-induced charge transfer in semiconducting conjugated polymers}, volume={11}, DOI={<a href=\"https://doi.org/10.1039/d3tc02263c\">10.1039/d3tc02263c</a>}, number={38}, journal={Journal of Materials Chemistry C}, publisher={Royal Society of Chemistry (RSC)}, author={Bauch, Fabian and Dong, Chuan-Ding and Schumacher, Stefan}, year={2023}, pages={12992–12998} }","ama":"Bauch F, Dong C-D, Schumacher S. Dynamics-induced charge transfer in semiconducting conjugated polymers. <i>Journal of Materials Chemistry C</i>. 2023;11(38):12992-12998. doi:<a href=\"https://doi.org/10.1039/d3tc02263c\">10.1039/d3tc02263c</a>","chicago":"Bauch, Fabian, Chuan-Ding Dong, and Stefan Schumacher. “Dynamics-Induced Charge Transfer in Semiconducting Conjugated Polymers.” <i>Journal of Materials Chemistry C</i> 11, no. 38 (2023): 12992–98. <a href=\"https://doi.org/10.1039/d3tc02263c\">https://doi.org/10.1039/d3tc02263c</a>.","ieee":"F. Bauch, C.-D. Dong, and S. Schumacher, “Dynamics-induced charge transfer in semiconducting conjugated polymers,” <i>Journal of Materials Chemistry C</i>, vol. 11, no. 38, pp. 12992–12998, 2023, doi: <a href=\"https://doi.org/10.1039/d3tc02263c\">10.1039/d3tc02263c</a>."},"intvolume":"        11","page":"12992-12998","publication_status":"published","publication_identifier":{"issn":["2050-7526","2050-7534"]},"doi":"10.1039/d3tc02263c","author":[{"last_name":"Bauch","full_name":"Bauch, Fabian","first_name":"Fabian"},{"first_name":"Chuan-Ding","last_name":"Dong","full_name":"Dong, Chuan-Ding"},{"full_name":"Schumacher, Stefan","last_name":"Schumacher","first_name":"Stefan"}],"volume":11,"date_updated":"2023-12-15T11:54:46Z","status":"public","type":"journal_article","user_id":"67188","_id":"49676"},{"title":"Dynamics-induced charge transfer in semiconducting conjugated polymers","doi":"10.1039/d3tc02263c","publisher":"Royal Society of Chemistry (RSC)","date_updated":"2024-02-07T14:36:09Z","author":[{"last_name":"Bauch","orcid":"0009-0008-6279-077X","id":"61389","full_name":"Bauch, Fabian","first_name":"Fabian"},{"first_name":"Chuan-Ding","last_name":"Dong","full_name":"Dong, Chuan-Ding","id":"67188"},{"first_name":"Stefan","full_name":"Schumacher, Stefan","id":"27271","last_name":"Schumacher","orcid":"0000-0003-4042-4951"}],"date_created":"2024-01-31T12:07:22Z","volume":11,"year":"2023","citation":{"ieee":"F. Bauch, C.-D. Dong, and S. Schumacher, “Dynamics-induced charge transfer in semiconducting conjugated polymers,” <i>Journal of Materials Chemistry C</i>, vol. 11, no. 38, pp. 12992–12998, 2023, doi: <a href=\"https://doi.org/10.1039/d3tc02263c\">10.1039/d3tc02263c</a>.","chicago":"Bauch, Fabian, Chuan-Ding Dong, and Stefan Schumacher. “Dynamics-Induced Charge Transfer in Semiconducting Conjugated Polymers.” <i>Journal of Materials Chemistry C</i> 11, no. 38 (2023): 12992–98. <a href=\"https://doi.org/10.1039/d3tc02263c\">https://doi.org/10.1039/d3tc02263c</a>.","ama":"Bauch F, Dong C-D, Schumacher S. Dynamics-induced charge transfer in semiconducting conjugated polymers. <i>Journal of Materials Chemistry C</i>. 2023;11(38):12992-12998. doi:<a href=\"https://doi.org/10.1039/d3tc02263c\">10.1039/d3tc02263c</a>","apa":"Bauch, F., Dong, C.-D., &#38; Schumacher, S. (2023). Dynamics-induced charge transfer in semiconducting conjugated polymers. <i>Journal of Materials Chemistry C</i>, <i>11</i>(38), 12992–12998. <a href=\"https://doi.org/10.1039/d3tc02263c\">https://doi.org/10.1039/d3tc02263c</a>","mla":"Bauch, Fabian, et al. “Dynamics-Induced Charge Transfer in Semiconducting Conjugated Polymers.” <i>Journal of Materials Chemistry C</i>, vol. 11, no. 38, Royal Society of Chemistry (RSC), 2023, pp. 12992–98, doi:<a href=\"https://doi.org/10.1039/d3tc02263c\">10.1039/d3tc02263c</a>.","short":"F. Bauch, C.-D. Dong, S. Schumacher, Journal of Materials Chemistry C 11 (2023) 12992–12998.","bibtex":"@article{Bauch_Dong_Schumacher_2023, title={Dynamics-induced charge transfer in semiconducting conjugated polymers}, volume={11}, DOI={<a href=\"https://doi.org/10.1039/d3tc02263c\">10.1039/d3tc02263c</a>}, number={38}, journal={Journal of Materials Chemistry C}, publisher={Royal Society of Chemistry (RSC)}, author={Bauch, Fabian and Dong, Chuan-Ding and Schumacher, Stefan}, year={2023}, pages={12992–12998} }"},"page":"12992-12998","intvolume":"        11","publication_status":"published","publication_identifier":{"issn":["2050-7526","2050-7534"]},"issue":"38","keyword":["Materials Chemistry","General Chemistry"],"language":[{"iso":"eng"}],"_id":"51093","user_id":"61389","abstract":[{"lang":"eng","text":"<jats:p>Dynamics-induced interchain charge transfer in a polymer aggregate in stack configuration can be understood by single-oligomer polaron energy.</jats:p>"}],"status":"public","type":"journal_article","publication":"Journal of Materials Chemistry C"},{"keyword":["Materials Chemistry","Polymers and Plastics","Organic Chemistry","Condensed Matter Physics"],"language":[{"iso":"eng"}],"publication":"Macromolecular Symposia","abstract":[{"text":"<jats:title>Abstract</jats:title><jats:p>Currently, the fused deposition modeling (FDM) process is the most common additive manufacturing technology. The principle of the FDM process is the strand wise deposition of molten thermoplastic polymers, by feeding a filament trough a heated nozzle. Due to the strand and layer wise deposition the cooling of the manufactured component is not uniform. This leads to dimensional deviations which may cause the component to be unusable for the desired application. In this paper, a method is described which is based on the shrinkage compensation through the adaption of every single raster line in components manufactured with the FDM process. The shrinkage compensation is based on a model resulting from a DOE which considers the main influencing factors on the shrinkage behavior of raster lines in the FDM process. An in‐house developed software analyzes the component and locally applies the shrinkage compensation with consideration of the boundary conditions, e.g., the position of the raster line in the component and the process parameters. Following, a validation using a simple geometry is conducted to show the effect of the presented adaptive scaling method.</jats:p>","lang":"eng"}],"publisher":"Wiley","date_created":"2023-10-19T07:25:06Z","title":"Adaptive Scaling of Components in the Fused Deposition Modeling Process","quality_controlled":"1","issue":"1","year":"2023","_id":"48277","department":[{"_id":"9"},{"_id":"367"},{"_id":"321"},{"_id":"219"},{"_id":"624"}],"user_id":"45537","type":"journal_article","status":"public","oa":"1","date_updated":"2024-02-23T08:36:42Z","volume":411,"author":[{"first_name":"Elmar","last_name":"Moritzer","full_name":"Moritzer, Elmar","id":"20531"},{"last_name":"Hecker","id":"45537","full_name":"Hecker, Felix","first_name":"Felix"}],"doi":"10.1002/masy.202200181","conference":{"start_date":"2022-11-13","name":"POLCOM 2022","location":"Bukarest","end_date":"2022-11-26"},"main_file_link":[{"open_access":"1","url":"https://doi.org/10.1002/masy.202200181"}],"publication_identifier":{"issn":["1022-1360","1521-3900"]},"publication_status":"published","intvolume":"       411","citation":{"ama":"Moritzer E, Hecker F. Adaptive Scaling of Components in the Fused Deposition Modeling Process. <i>Macromolecular Symposia</i>. 2023;411(1). doi:<a href=\"https://doi.org/10.1002/masy.202200181\">10.1002/masy.202200181</a>","ieee":"E. Moritzer and F. Hecker, “Adaptive Scaling of Components in the Fused Deposition Modeling Process,” <i>Macromolecular Symposia</i>, vol. 411, no. 1, 2023, doi: <a href=\"https://doi.org/10.1002/masy.202200181\">10.1002/masy.202200181</a>.","chicago":"Moritzer, Elmar, and Felix Hecker. “Adaptive Scaling of Components in the Fused Deposition Modeling Process.” <i>Macromolecular Symposia</i> 411, no. 1 (2023). <a href=\"https://doi.org/10.1002/masy.202200181\">https://doi.org/10.1002/masy.202200181</a>.","bibtex":"@article{Moritzer_Hecker_2023, title={Adaptive Scaling of Components in the Fused Deposition Modeling Process}, volume={411}, DOI={<a href=\"https://doi.org/10.1002/masy.202200181\">10.1002/masy.202200181</a>}, number={1}, journal={Macromolecular Symposia}, publisher={Wiley}, author={Moritzer, Elmar and Hecker, Felix}, year={2023} }","short":"E. Moritzer, F. Hecker, Macromolecular Symposia 411 (2023).","mla":"Moritzer, Elmar, and Felix Hecker. “Adaptive Scaling of Components in the Fused Deposition Modeling Process.” <i>Macromolecular Symposia</i>, vol. 411, no. 1, Wiley, 2023, doi:<a href=\"https://doi.org/10.1002/masy.202200181\">10.1002/masy.202200181</a>.","apa":"Moritzer, E., &#38; Hecker, F. (2023). Adaptive Scaling of Components in the Fused Deposition Modeling Process. <i>Macromolecular Symposia</i>, <i>411</i>(1). <a href=\"https://doi.org/10.1002/masy.202200181\">https://doi.org/10.1002/masy.202200181</a>"}},{"keyword":["Materials Chemistry","Polymers and Plastics","Organic Chemistry","Condensed Matter Physics"],"language":[{"iso":"eng"}],"_id":"52802","department":[{"_id":"9"},{"_id":"367"},{"_id":"321"}],"user_id":"44116","abstract":[{"lang":"eng","text":"<jats:title>Abstract</jats:title><jats:p>Currently, the fused deposition modeling (FDM) process is the most common additive manufacturing technology. The principle of the FDM process is the strand wise deposition of molten thermoplastic polymers, by feeding a filament trough a heated nozzle. Due to the strand and layer wise deposition the cooling of the manufactured component is not uniform. This leads to dimensional deviations which may cause the component to be unusable for the desired application. In this paper, a method is described which is based on the shrinkage compensation through the adaption of every single raster line in components manufactured with the FDM process. The shrinkage compensation is based on a model resulting from a DOE which considers the main influencing factors on the shrinkage behavior of raster lines in the FDM process. An in‐house developed software analyzes the component and locally applies the shrinkage compensation with consideration of the boundary conditions, e.g., the position of the raster line in the component and the process parameters. Following, a validation using a simple geometry is conducted to show the effect of the presented adaptive scaling method.</jats:p>"}],"status":"public","publication":"Macromolecular Symposia","type":"journal_article","title":"Adaptive Scaling of Components in the Fused Deposition Modeling Process","doi":"10.1002/masy.202200181","publisher":"Wiley","date_updated":"2024-03-25T09:17:03Z","volume":411,"date_created":"2024-03-25T09:16:46Z","author":[{"first_name":"Elmar","last_name":"Moritzer","full_name":"Moritzer, Elmar","id":"20531"},{"first_name":"Felix","last_name":"Hecker","full_name":"Hecker, Felix","id":"45537"}],"year":"2023","intvolume":"       411","citation":{"ieee":"E. Moritzer and F. Hecker, “Adaptive Scaling of Components in the Fused Deposition Modeling Process,” <i>Macromolecular Symposia</i>, vol. 411, no. 1, 2023, doi: <a href=\"https://doi.org/10.1002/masy.202200181\">10.1002/masy.202200181</a>.","chicago":"Moritzer, Elmar, and Felix Hecker. “Adaptive Scaling of Components in the Fused Deposition Modeling Process.” <i>Macromolecular Symposia</i> 411, no. 1 (2023). <a href=\"https://doi.org/10.1002/masy.202200181\">https://doi.org/10.1002/masy.202200181</a>.","ama":"Moritzer E, Hecker F. Adaptive Scaling of Components in the Fused Deposition Modeling Process. <i>Macromolecular Symposia</i>. 2023;411(1). doi:<a href=\"https://doi.org/10.1002/masy.202200181\">10.1002/masy.202200181</a>","apa":"Moritzer, E., &#38; Hecker, F. (2023). Adaptive Scaling of Components in the Fused Deposition Modeling Process. <i>Macromolecular Symposia</i>, <i>411</i>(1). <a href=\"https://doi.org/10.1002/masy.202200181\">https://doi.org/10.1002/masy.202200181</a>","short":"E. Moritzer, F. Hecker, Macromolecular Symposia 411 (2023).","bibtex":"@article{Moritzer_Hecker_2023, title={Adaptive Scaling of Components in the Fused Deposition Modeling Process}, volume={411}, DOI={<a href=\"https://doi.org/10.1002/masy.202200181\">10.1002/masy.202200181</a>}, number={1}, journal={Macromolecular Symposia}, publisher={Wiley}, author={Moritzer, Elmar and Hecker, Felix}, year={2023} }","mla":"Moritzer, Elmar, and Felix Hecker. “Adaptive Scaling of Components in the Fused Deposition Modeling Process.” <i>Macromolecular Symposia</i>, vol. 411, no. 1, Wiley, 2023, doi:<a href=\"https://doi.org/10.1002/masy.202200181\">10.1002/masy.202200181</a>."},"publication_identifier":{"issn":["1022-1360","1521-3900"]},"quality_controlled":"1","publication_status":"published","issue":"1"},{"status":"public","type":"journal_article","article_type":"original","_id":"53170","user_id":"94","department":[{"_id":"163"}],"citation":{"short":"R. Methling, O. Dückmann, F. Simon, C. Wolf‐Brandstetter, D. Kuckling, Macromolecular Materials and Engineering 308 (2023).","mla":"Methling, Rafael, et al. “Antimicrobial Brushes on Titanium via ‘Grafting to’ Using Phosphonic Acid/Pyridinium Containing Block Copolymers.” <i>Macromolecular Materials and Engineering</i>, vol. 308, no. 8, Wiley, 2023, doi:<a href=\"https://doi.org/10.1002/mame.202200665\">10.1002/mame.202200665</a>.","bibtex":"@article{Methling_Dückmann_Simon_Wolf‐Brandstetter_Kuckling_2023, title={Antimicrobial Brushes on Titanium via “Grafting to” Using Phosphonic Acid/Pyridinium Containing Block Copolymers}, volume={308}, DOI={<a href=\"https://doi.org/10.1002/mame.202200665\">10.1002/mame.202200665</a>}, number={8}, journal={Macromolecular Materials and Engineering}, publisher={Wiley}, author={Methling, Rafael and Dückmann, Oliver and Simon, Frank and Wolf‐Brandstetter, Cornelia and Kuckling, Dirk}, year={2023} }","apa":"Methling, R., Dückmann, O., Simon, F., Wolf‐Brandstetter, C., &#38; Kuckling, D. (2023). Antimicrobial Brushes on Titanium via “Grafting to” Using Phosphonic Acid/Pyridinium Containing Block Copolymers. <i>Macromolecular Materials and Engineering</i>, <i>308</i>(8). <a href=\"https://doi.org/10.1002/mame.202200665\">https://doi.org/10.1002/mame.202200665</a>","ieee":"R. Methling, O. Dückmann, F. Simon, C. Wolf‐Brandstetter, and D. Kuckling, “Antimicrobial Brushes on Titanium via ‘Grafting to’ Using Phosphonic Acid/Pyridinium Containing Block Copolymers,” <i>Macromolecular Materials and Engineering</i>, vol. 308, no. 8, 2023, doi: <a href=\"https://doi.org/10.1002/mame.202200665\">10.1002/mame.202200665</a>.","chicago":"Methling, Rafael, Oliver Dückmann, Frank Simon, Cornelia Wolf‐Brandstetter, and Dirk Kuckling. “Antimicrobial Brushes on Titanium via ‘Grafting to’ Using Phosphonic Acid/Pyridinium Containing Block Copolymers.” <i>Macromolecular Materials and Engineering</i> 308, no. 8 (2023). <a href=\"https://doi.org/10.1002/mame.202200665\">https://doi.org/10.1002/mame.202200665</a>.","ama":"Methling R, Dückmann O, Simon F, Wolf‐Brandstetter C, Kuckling D. Antimicrobial Brushes on Titanium via “Grafting to” Using Phosphonic Acid/Pyridinium Containing Block Copolymers. <i>Macromolecular Materials and Engineering</i>. 2023;308(8). doi:<a href=\"https://doi.org/10.1002/mame.202200665\">10.1002/mame.202200665</a>"},"intvolume":"       308","publication_status":"published","publication_identifier":{"issn":["1438-7492","1439-2054"]},"doi":"10.1002/mame.202200665","date_updated":"2024-04-03T11:10:05Z","author":[{"full_name":"Methling, Rafael","last_name":"Methling","first_name":"Rafael"},{"full_name":"Dückmann, Oliver","last_name":"Dückmann","first_name":"Oliver"},{"first_name":"Frank","full_name":"Simon, Frank","last_name":"Simon"},{"first_name":"Cornelia","last_name":"Wolf‐Brandstetter","full_name":"Wolf‐Brandstetter, Cornelia"},{"id":"287","full_name":"Kuckling, Dirk","last_name":"Kuckling","first_name":"Dirk"}],"volume":308,"abstract":[{"lang":"eng","text":"<jats:title>Abstract</jats:title><jats:p>Coating medical implants with antibacterial polymers may prevent postoperative infections which are a common issue for conventional titanium implants and can even lead to implant failure. Easily applicable diblock copolymers are presented that form polymer brushes via “grafting to” mechanism on titanium and equip the modified material with antibacterial properties. The polymers carry quaternized pyridinium units to combat bacteria and phosphonic acid groups which allow the linear chains to be anchored to metal surfaces in a convenient coating process. The polymers are synthesized via reversible‐addition‐fragmentation‐chain‐transfer (RAFT) polymerization and postmodifications and are characterized using NMR spectroscopy and SEC. Low grafting densities are a major drawback of the “grafting to” approach compared to “grafting from”. Thus, the number of phosphonic acid groups in the anchor block are varied to investigate and optimize the surface binding. Modified titanium surfaces are examined regarding their composition, wetting behavior, streaming potential, and coating stability. Evaluation of the antimicrobial properties revealed reduced bacterial adhesion and biofilm formation for certain polymers, albeit the cell biocompatibility against human gingival fibroblasts is also impaired. The presented findings show the potential of easy‐to‐apply polymer coatings and aid in designing next‐generation implant surface modifications.</jats:p>"}],"publication":"Macromolecular Materials and Engineering","keyword":["Materials Chemistry","Polymers and Plastics","Organic Chemistry","General Chemical Engineering"],"language":[{"iso":"eng"}],"year":"2023","issue":"8","title":"Antimicrobial Brushes on Titanium via “Grafting to” Using Phosphonic Acid/Pyridinium Containing Block Copolymers","publisher":"Wiley","date_created":"2024-04-03T11:08:51Z"},{"publication":"Journal of Cellular Plastics","abstract":[{"text":"<jats:p> Microcellular wood fiber reinforced polymers offer the possibility to reduce the use of fossil raw materials. In particular, thick-walled structures with thicknesses greater than 6 mm offer a high potential for weight savings. This study investigates the cell structures and mechanical properties of injection-molded test specimens. The influence of different thicknesses (6–10 mm) along with different chemical blowing agents (endothermic, exothermic) with varying dosages (0–2 wt%) is analyzed. The investigations reveal that exothermic chemical blowing agents form finer cells consistently to thin-walled structures than endothermic ones. Higher foaming agent content leads to higher pore fractions, with many small cells coalescing into a large open-pore cell network. The mechanical properties depend mainly on the pore content of the sample. The specific tensile properties deteriorate with the use of chemical blowing agents (CFA), whereas the sandwich structure produced with compact edge layers has a positive influence on the specific flexural properties. </jats:p>","lang":"eng"}],"keyword":["Materials Chemistry","Polymers and Plastics","General Chemistry"],"language":[{"iso":"eng"}],"quality_controlled":"1","issue":"3","year":"2023","publisher":"SAGE Publications","date_created":"2023-02-27T07:11:52Z","title":"Morphological and mechanical properties of foamed thick-walled Wood-Plastic-Composite structures","type":"journal_article","status":"public","_id":"42515","user_id":"38212","department":[{"_id":"321"},{"_id":"9"},{"_id":"367"},{"_id":"147"}],"publication_status":"published","publication_identifier":{"issn":["0021-955X","1530-7999"]},"citation":{"short":"E. Moritzer, F. Flachmann, Journal of Cellular Plastics 59 (2023) 187–199.","mla":"Moritzer, Elmar, and Felix Flachmann. “Morphological and Mechanical Properties of Foamed Thick-Walled Wood-Plastic-Composite Structures.” <i>Journal of Cellular Plastics</i>, vol. 59, no. 3, SAGE Publications, 2023, pp. 187–99, doi:<a href=\"https://doi.org/10.1177/0021955x231161175\">10.1177/0021955x231161175</a>.","bibtex":"@article{Moritzer_Flachmann_2023, title={Morphological and mechanical properties of foamed thick-walled Wood-Plastic-Composite structures}, volume={59}, DOI={<a href=\"https://doi.org/10.1177/0021955x231161175\">10.1177/0021955x231161175</a>}, number={3}, journal={Journal of Cellular Plastics}, publisher={SAGE Publications}, author={Moritzer, Elmar and Flachmann, Felix}, year={2023}, pages={187–199} }","apa":"Moritzer, E., &#38; Flachmann, F. (2023). Morphological and mechanical properties of foamed thick-walled Wood-Plastic-Composite structures. <i>Journal of Cellular Plastics</i>, <i>59</i>(3), 187–199. <a href=\"https://doi.org/10.1177/0021955x231161175\">https://doi.org/10.1177/0021955x231161175</a>","chicago":"Moritzer, Elmar, and Felix Flachmann. “Morphological and Mechanical Properties of Foamed Thick-Walled Wood-Plastic-Composite Structures.” <i>Journal of Cellular Plastics</i> 59, no. 3 (2023): 187–99. <a href=\"https://doi.org/10.1177/0021955x231161175\">https://doi.org/10.1177/0021955x231161175</a>.","ieee":"E. Moritzer and F. Flachmann, “Morphological and mechanical properties of foamed thick-walled Wood-Plastic-Composite structures,” <i>Journal of Cellular Plastics</i>, vol. 59, no. 3, pp. 187–199, 2023, doi: <a href=\"https://doi.org/10.1177/0021955x231161175\">10.1177/0021955x231161175</a>.","ama":"Moritzer E, Flachmann F. Morphological and mechanical properties of foamed thick-walled Wood-Plastic-Composite structures. <i>Journal of Cellular Plastics</i>. 2023;59(3):187-199. doi:<a href=\"https://doi.org/10.1177/0021955x231161175\">10.1177/0021955x231161175</a>"},"intvolume":"        59","page":"187-199","date_updated":"2023-04-26T13:40:19Z","oa":"1","author":[{"last_name":"Moritzer","id":"20531","full_name":"Moritzer, Elmar","first_name":"Elmar"},{"full_name":"Flachmann, Felix","id":"38212","last_name":"Flachmann","orcid":"0000-0002-7651-7028","first_name":"Felix"}],"volume":59,"main_file_link":[{"open_access":"1"}],"doi":"10.1177/0021955x231161175"},{"department":[{"_id":"35"},{"_id":"306"}],"user_id":"89054","_id":"40981","language":[{"iso":"eng"}],"keyword":["Materials Chemistry","Electrochemistry","Surfaces","Coatings and Films","Condensed Matter Physics","Renewable Energy","Sustainability and the Environment","Electronic","Optical and Magnetic Materials"],"article_number":"010526","publication":"Journal of The Electrochemical Society","type":"journal_article","status":"public","abstract":[{"text":"Room temperature sodium-sulfur (RT Na-S) batteries are considered potential candidates for stationary power storage applications due to their low cost, broad active material availability and low toxicity. Challenges, such as high volume expansion of the S-cathode upon discharge, low electronic conductivity of S as active material and herewith limited rate capability as well as the shuttling of polysulfides (PSs) as intermediates often impede the cycle stability and practical application of Na-S batteries. Sulfurized poly(acrylonitrile) (SPAN) inherently inhibits the shuttling of PSs and shows compatibility with carbonate-based electrolytes, however, its exact redox mechanism remained unclear to date. Herein, we implement a commercially available and simple electrolyte into the Na-SPAN cell chemistry and demonstrate its high rate and cycle stability. Through the application of in situ techniques utilizing electronic impedance spectroscopy (EIS) and X-ray absorption spectroscopy (XAS) at different depths of charge and discharge, an insight into SPAN’s redox chemistry is obtained.","lang":"eng"}],"volume":170,"date_created":"2023-01-30T16:08:15Z","author":[{"first_name":"Julian","last_name":"Kappler","full_name":"Kappler, Julian"},{"first_name":"Güldeniz","id":"89054","full_name":"Tonbul, Güldeniz","last_name":"Tonbul","orcid":"0000-0002-0999-9995"},{"first_name":"Roland","last_name":"Schoch","orcid":"0000-0003-2061-7289","id":"48467","full_name":"Schoch, Roland"},{"first_name":"Saravanakumar","last_name":"Murugan","full_name":"Murugan, Saravanakumar"},{"first_name":"Michał","last_name":"Nowakowski","orcid":"0000-0002-3734-7011","full_name":"Nowakowski, Michał","id":"78878"},{"first_name":"Pia Lena","last_name":"Lange","full_name":"Lange, Pia Lena"},{"last_name":"Klostermann","full_name":"Klostermann, Sina Vanessa","first_name":"Sina Vanessa"},{"last_name":"Bauer","orcid":"0000-0002-9294-6076","full_name":"Bauer, Matthias","id":"47241","first_name":"Matthias"},{"first_name":"Thomas","last_name":"Schleid","full_name":"Schleid, Thomas"},{"last_name":"Kästner","full_name":"Kästner, Johannes","first_name":"Johannes"},{"first_name":"Michael Rudolf","full_name":"Buchmeiser, Michael Rudolf","last_name":"Buchmeiser"}],"publisher":"The Electrochemical Society","date_updated":"2023-05-03T08:27:13Z","doi":"10.1149/1945-7111/acb2fa","title":"Understanding the Redox Mechanism of Sulfurized Poly(acrylonitrile) as Highly Rate and Cycle Stable Cathode Material for Sodium-Sulfur Batteries","issue":"1","publication_identifier":{"issn":["0013-4651","1945-7111"]},"publication_status":"published","intvolume":"       170","citation":{"chicago":"Kappler, Julian, Güldeniz Tonbul, Roland Schoch, Saravanakumar Murugan, Michał Nowakowski, Pia Lena Lange, Sina Vanessa Klostermann, et al. “Understanding the Redox Mechanism of Sulfurized Poly(Acrylonitrile) as Highly Rate and Cycle Stable Cathode Material for Sodium-Sulfur Batteries.” <i>Journal of The Electrochemical Society</i> 170, no. 1 (2023). <a href=\"https://doi.org/10.1149/1945-7111/acb2fa\">https://doi.org/10.1149/1945-7111/acb2fa</a>.","ieee":"J. Kappler <i>et al.</i>, “Understanding the Redox Mechanism of Sulfurized Poly(acrylonitrile) as Highly Rate and Cycle Stable Cathode Material for Sodium-Sulfur Batteries,” <i>Journal of The Electrochemical Society</i>, vol. 170, no. 1, Art. no. 010526, 2023, doi: <a href=\"https://doi.org/10.1149/1945-7111/acb2fa\">10.1149/1945-7111/acb2fa</a>.","ama":"Kappler J, Tonbul G, Schoch R, et al. Understanding the Redox Mechanism of Sulfurized Poly(acrylonitrile) as Highly Rate and Cycle Stable Cathode Material for Sodium-Sulfur Batteries. <i>Journal of The Electrochemical Society</i>. 2023;170(1). doi:<a href=\"https://doi.org/10.1149/1945-7111/acb2fa\">10.1149/1945-7111/acb2fa</a>","mla":"Kappler, Julian, et al. “Understanding the Redox Mechanism of Sulfurized Poly(Acrylonitrile) as Highly Rate and Cycle Stable Cathode Material for Sodium-Sulfur Batteries.” <i>Journal of The Electrochemical Society</i>, vol. 170, no. 1, 010526, The Electrochemical Society, 2023, doi:<a href=\"https://doi.org/10.1149/1945-7111/acb2fa\">10.1149/1945-7111/acb2fa</a>.","bibtex":"@article{Kappler_Tonbul_Schoch_Murugan_Nowakowski_Lange_Klostermann_Bauer_Schleid_Kästner_et al._2023, title={Understanding the Redox Mechanism of Sulfurized Poly(acrylonitrile) as Highly Rate and Cycle Stable Cathode Material for Sodium-Sulfur Batteries}, volume={170}, DOI={<a href=\"https://doi.org/10.1149/1945-7111/acb2fa\">10.1149/1945-7111/acb2fa</a>}, number={1010526}, journal={Journal of The Electrochemical Society}, publisher={The Electrochemical Society}, author={Kappler, Julian and Tonbul, Güldeniz and Schoch, Roland and Murugan, Saravanakumar and Nowakowski, Michał and Lange, Pia Lena and Klostermann, Sina Vanessa and Bauer, Matthias and Schleid, Thomas and Kästner, Johannes and et al.}, year={2023} }","short":"J. Kappler, G. Tonbul, R. Schoch, S. Murugan, M. Nowakowski, P.L. Lange, S.V. Klostermann, M. Bauer, T. Schleid, J. Kästner, M.R. Buchmeiser, Journal of The Electrochemical Society 170 (2023).","apa":"Kappler, J., Tonbul, G., Schoch, R., Murugan, S., Nowakowski, M., Lange, P. L., Klostermann, S. V., Bauer, M., Schleid, T., Kästner, J., &#38; Buchmeiser, M. R. (2023). Understanding the Redox Mechanism of Sulfurized Poly(acrylonitrile) as Highly Rate and Cycle Stable Cathode Material for Sodium-Sulfur Batteries. <i>Journal of The Electrochemical Society</i>, <i>170</i>(1), Article 010526. <a href=\"https://doi.org/10.1149/1945-7111/acb2fa\">https://doi.org/10.1149/1945-7111/acb2fa</a>"},"year":"2023"},{"_id":"42517","department":[{"_id":"302"}],"user_id":"48864","keyword":["Materials Chemistry","General Chemical Engineering","General Chemistry"],"language":[{"iso":"eng"}],"publication":"Chemistry of Materials","type":"journal_article","status":"public","date_updated":"2023-05-05T10:50:56Z","publisher":"American Chemical Society (ACS)","volume":35,"date_created":"2023-02-27T07:42:33Z","author":[{"full_name":"Tapio, Kosti","last_name":"Tapio","first_name":"Kosti"},{"first_name":"Charlotte","full_name":"Kielar, Charlotte","last_name":"Kielar"},{"full_name":"Parikka, Johannes M.","last_name":"Parikka","first_name":"Johannes M."},{"first_name":"Adrian","orcid":"0000-0001-7139-3110","last_name":"Keller","id":"48864","full_name":"Keller, Adrian"},{"first_name":"Heini","full_name":"Järvinen, Heini","last_name":"Järvinen"},{"first_name":"Karim","last_name":"Fahmy","full_name":"Fahmy, Karim"},{"first_name":"J. Jussi","last_name":"Toppari","full_name":"Toppari, J. Jussi"}],"title":"Large-Scale Formation of DNA Origami Lattices on Silicon","doi":"10.1021/acs.chemmater.2c03190","publication_identifier":{"issn":["0897-4756","1520-5002"]},"publication_status":"published","year":"2023","page":"1961–1971","intvolume":"        35","citation":{"bibtex":"@article{Tapio_Kielar_Parikka_Keller_Järvinen_Fahmy_Toppari_2023, title={Large-Scale Formation of DNA Origami Lattices on Silicon}, volume={35}, DOI={<a href=\"https://doi.org/10.1021/acs.chemmater.2c03190\">10.1021/acs.chemmater.2c03190</a>}, journal={Chemistry of Materials}, publisher={American Chemical Society (ACS)}, author={Tapio, Kosti and Kielar, Charlotte and Parikka, Johannes M. and Keller, Adrian and Järvinen, Heini and Fahmy, Karim and Toppari, J. Jussi}, year={2023}, pages={1961–1971} }","short":"K. Tapio, C. Kielar, J.M. Parikka, A. Keller, H. Järvinen, K. Fahmy, J.J. Toppari, Chemistry of Materials 35 (2023) 1961–1971.","mla":"Tapio, Kosti, et al. “Large-Scale Formation of DNA Origami Lattices on Silicon.” <i>Chemistry of Materials</i>, vol. 35, American Chemical Society (ACS), 2023, pp. 1961–1971, doi:<a href=\"https://doi.org/10.1021/acs.chemmater.2c03190\">10.1021/acs.chemmater.2c03190</a>.","apa":"Tapio, K., Kielar, C., Parikka, J. M., Keller, A., Järvinen, H., Fahmy, K., &#38; Toppari, J. J. (2023). Large-Scale Formation of DNA Origami Lattices on Silicon. <i>Chemistry of Materials</i>, <i>35</i>, 1961–1971. <a href=\"https://doi.org/10.1021/acs.chemmater.2c03190\">https://doi.org/10.1021/acs.chemmater.2c03190</a>","chicago":"Tapio, Kosti, Charlotte Kielar, Johannes M. Parikka, Adrian Keller, Heini Järvinen, Karim Fahmy, and J. Jussi Toppari. “Large-Scale Formation of DNA Origami Lattices on Silicon.” <i>Chemistry of Materials</i> 35 (2023): 1961–1971. <a href=\"https://doi.org/10.1021/acs.chemmater.2c03190\">https://doi.org/10.1021/acs.chemmater.2c03190</a>.","ieee":"K. Tapio <i>et al.</i>, “Large-Scale Formation of DNA Origami Lattices on Silicon,” <i>Chemistry of Materials</i>, vol. 35, pp. 1961–1971, 2023, doi: <a href=\"https://doi.org/10.1021/acs.chemmater.2c03190\">10.1021/acs.chemmater.2c03190</a>.","ama":"Tapio K, Kielar C, Parikka JM, et al. Large-Scale Formation of DNA Origami Lattices on Silicon. <i>Chemistry of Materials</i>. 2023;35:1961–1971. doi:<a href=\"https://doi.org/10.1021/acs.chemmater.2c03190\">10.1021/acs.chemmater.2c03190</a>"}},{"publication":"The Journal of Adhesion","abstract":[{"text":"To improve the mechanical performance and to address current shortcomings of adhesive bonds such as bond degradation due to aging, a pulsed laser surface pretreatment of the metal surfaces of aluminum AW 6082-T6 joints with epoxy adhesive E320 is investigated. The surface treatment of the specimens resulted in increased single-lap shear (SLS) strengths before and after hydrothermal aging in 80°C hot water compared to nonpretreated reference specimens. In order to reveal the correlations of laser parameters, resulting surface morphologies and the SLS strength, differently laser pretreated surfaces were characterized at the micro- and nanoscale using optical and scanning electron microscopies. The surface enlargement was quantified with a digital image analysis of cross-sections prepared from the joint interfaces. An analysis of variances (ANOVA) of the SLS results indicated that the laser parameters power and pulse frequency were most critical for obtaining high SLS strengths. Pretreated joint surfaces with a high micro- and nano-surface enlargement and deep solidification structures provide high SLS strengths of up to 50 MPa and almost negligible aging losses of merely 4%. Undercut structures on the pretreated surfaces were found to be beneficial for the mechanical and aging properties when only limited micro- and nanostructuring was applied.","lang":"eng"}],"language":[{"iso":"eng"}],"keyword":["Materials Chemistry","Surfaces","Coatings and Films","Surfaces and Interfaces","Mechanics of Materials","General Chemistry"],"quality_controlled":"1","year":"2023","date_created":"2023-08-15T10:22:38Z","publisher":"Informa UK Limited","title":"Relationship between laser-generated micro- and nanostructures and the long-term stability of bonded epoxy-aluminum joints","type":"journal_article","status":"public","department":[{"_id":"321"},{"_id":"149"},{"_id":"9"}],"user_id":"48039","_id":"46494","article_type":"original","publication_identifier":{"issn":["0021-8464","1545-5823"]},"publication_status":"published","page":"1-31","citation":{"apa":"Freund, J., Löbbecke, M., Delp, A., Walther, F., Wu, S., Tröster, T., &#38; Haubrich, J. (2023). Relationship between laser-generated micro- and nanostructures and the long-term stability of bonded epoxy-aluminum joints. <i>The Journal of Adhesion</i>, 1–31. <a href=\"https://doi.org/10.1080/00218464.2023.2223475\">https://doi.org/10.1080/00218464.2023.2223475</a>","mla":"Freund, Jonathan, et al. “Relationship between Laser-Generated Micro- and Nanostructures and the Long-Term Stability of Bonded Epoxy-Aluminum Joints.” <i>The Journal of Adhesion</i>, Informa UK Limited, 2023, pp. 1–31, doi:<a href=\"https://doi.org/10.1080/00218464.2023.2223475\">10.1080/00218464.2023.2223475</a>.","short":"J. Freund, M. Löbbecke, A. Delp, F. Walther, S. Wu, T. Tröster, J. Haubrich, The Journal of Adhesion (2023) 1–31.","bibtex":"@article{Freund_Löbbecke_Delp_Walther_Wu_Tröster_Haubrich_2023, title={Relationship between laser-generated micro- and nanostructures and the long-term stability of bonded epoxy-aluminum joints}, DOI={<a href=\"https://doi.org/10.1080/00218464.2023.2223475\">10.1080/00218464.2023.2223475</a>}, journal={The Journal of Adhesion}, publisher={Informa UK Limited}, author={Freund, Jonathan and Löbbecke, Miriam and Delp, Alexander and Walther, Frank and Wu, Shuang and Tröster, Thomas and Haubrich, Jan}, year={2023}, pages={1–31} }","ieee":"J. Freund <i>et al.</i>, “Relationship between laser-generated micro- and nanostructures and the long-term stability of bonded epoxy-aluminum joints,” <i>The Journal of Adhesion</i>, pp. 1–31, 2023, doi: <a href=\"https://doi.org/10.1080/00218464.2023.2223475\">10.1080/00218464.2023.2223475</a>.","chicago":"Freund, Jonathan, Miriam Löbbecke, Alexander Delp, Frank Walther, Shuang Wu, Thomas Tröster, and Jan Haubrich. “Relationship between Laser-Generated Micro- and Nanostructures and the Long-Term Stability of Bonded Epoxy-Aluminum Joints.” <i>The Journal of Adhesion</i>, 2023, 1–31. <a href=\"https://doi.org/10.1080/00218464.2023.2223475\">https://doi.org/10.1080/00218464.2023.2223475</a>.","ama":"Freund J, Löbbecke M, Delp A, et al. Relationship between laser-generated micro- and nanostructures and the long-term stability of bonded epoxy-aluminum joints. <i>The Journal of Adhesion</i>. Published online 2023:1-31. doi:<a href=\"https://doi.org/10.1080/00218464.2023.2223475\">10.1080/00218464.2023.2223475</a>"},"author":[{"first_name":"Jonathan","full_name":"Freund, Jonathan","last_name":"Freund"},{"first_name":"Miriam","last_name":"Löbbecke","full_name":"Löbbecke, Miriam"},{"first_name":"Alexander","last_name":"Delp","full_name":"Delp, Alexander"},{"first_name":"Frank","last_name":"Walther","full_name":"Walther, Frank"},{"first_name":"Shuang","full_name":"Wu, Shuang","id":"48039","orcid":"0000-0001-8645-9952","last_name":"Wu"},{"first_name":"Thomas","last_name":"Tröster","id":"553","full_name":"Tröster, Thomas"},{"last_name":"Haubrich","full_name":"Haubrich, Jan","first_name":"Jan"}],"date_updated":"2025-01-30T12:35:30Z","doi":"10.1080/00218464.2023.2223475"},{"article_type":"original","_id":"46495","department":[{"_id":"321"},{"_id":"149"},{"_id":"9"}],"user_id":"48039","status":"public","type":"journal_article","doi":"10.1080/00218464.2023.2245758","date_updated":"2025-01-30T12:33:42Z","author":[{"first_name":"Shuang","full_name":"Wu, Shuang","id":"48039","orcid":"0000-0001-8645-9952","last_name":"Wu"},{"first_name":"Alexander","last_name":"Delp","full_name":"Delp, Alexander"},{"full_name":"Freund, Jonathan","last_name":"Freund","first_name":"Jonathan"},{"last_name":"Walther","full_name":"Walther, Frank","first_name":"Frank"},{"full_name":"Haubrich, Jan","last_name":"Haubrich","first_name":"Jan"},{"full_name":"Löbbecke, Miriam","last_name":"Löbbecke","first_name":"Miriam"},{"first_name":"Thomas","id":"553","full_name":"Tröster, Thomas","last_name":"Tröster"}],"page":"1-29","citation":{"bibtex":"@article{Wu_Delp_Freund_Walther_Haubrich_Löbbecke_Tröster_2023, title={Adhesion properties of the hybrid system made of laser-structured aluminium EN AW 6082 and CFRP by co-bonding-pressing process}, DOI={<a href=\"https://doi.org/10.1080/00218464.2023.2245758\">10.1080/00218464.2023.2245758</a>}, journal={The Journal of Adhesion}, publisher={Informa UK Limited}, author={Wu, Shuang and Delp, Alexander and Freund, Jonathan and Walther, Frank and Haubrich, Jan and Löbbecke, Miriam and Tröster, Thomas}, year={2023}, pages={1–29} }","short":"S. Wu, A. Delp, J. Freund, F. Walther, J. Haubrich, M. Löbbecke, T. Tröster, The Journal of Adhesion (2023) 1–29.","mla":"Wu, Shuang, et al. “Adhesion Properties of the Hybrid System Made of Laser-Structured Aluminium EN AW 6082 and CFRP by Co-Bonding-Pressing Process.” <i>The Journal of Adhesion</i>, Informa UK Limited, 2023, pp. 1–29, doi:<a href=\"https://doi.org/10.1080/00218464.2023.2245758\">10.1080/00218464.2023.2245758</a>.","apa":"Wu, S., Delp, A., Freund, J., Walther, F., Haubrich, J., Löbbecke, M., &#38; Tröster, T. (2023). Adhesion properties of the hybrid system made of laser-structured aluminium EN AW 6082 and CFRP by co-bonding-pressing process. <i>The Journal of Adhesion</i>, 1–29. <a href=\"https://doi.org/10.1080/00218464.2023.2245758\">https://doi.org/10.1080/00218464.2023.2245758</a>","ama":"Wu S, Delp A, Freund J, et al. Adhesion properties of the hybrid system made of laser-structured aluminium EN AW 6082 and CFRP by co-bonding-pressing process. <i>The Journal of Adhesion</i>. Published online 2023:1-29. doi:<a href=\"https://doi.org/10.1080/00218464.2023.2245758\">10.1080/00218464.2023.2245758</a>","chicago":"Wu, Shuang, Alexander Delp, Jonathan Freund, Frank Walther, Jan Haubrich, Miriam Löbbecke, and Thomas Tröster. “Adhesion Properties of the Hybrid System Made of Laser-Structured Aluminium EN AW 6082 and CFRP by Co-Bonding-Pressing Process.” <i>The Journal of Adhesion</i>, 2023, 1–29. <a href=\"https://doi.org/10.1080/00218464.2023.2245758\">https://doi.org/10.1080/00218464.2023.2245758</a>.","ieee":"S. Wu <i>et al.</i>, “Adhesion properties of the hybrid system made of laser-structured aluminium EN AW 6082 and CFRP by co-bonding-pressing process,” <i>The Journal of Adhesion</i>, pp. 1–29, 2023, doi: <a href=\"https://doi.org/10.1080/00218464.2023.2245758\">10.1080/00218464.2023.2245758</a>."},"publication_identifier":{"issn":["0021-8464","1545-5823"]},"publication_status":"published","keyword":["Materials Chemistry","Surfaces","Coatings and Films","Surfaces and Interfaces","Mechanics of Materials","General Chemistry"],"language":[{"iso":"eng"}],"abstract":[{"lang":"eng","text":"A parameter investigation for manufacturing a hybrid system through the prepreg pressing process was carried out within the scope of this work to achieve optimal adhesion properties. The hybrid specimen comprises an aluminium sheet of alloy EN AW 6082 in T6 condition and a thermoset Carbon Fibre Reinforced Plastics prepreg. The prepreg pressing process allows the curing reaction of epoxy resin and the joining process to occur simultaneously to avoid an additional bonding process step. The surface of the aluminium sheet was pretreated in advance using a pulsed Nd:YAG laser to enhance the bonding properties. In the first step, the shear edge tests investigated the adhesion properties achieved with different consolidation (temperature, time and pressure) and laser parameters. Then, 3-point bending tests were carried out to investigate the influence of the consolidation parameters on the mechanical properties of the Carbon Fibre Reinforced Plastics-laminate. In this way, the optimal parameter sets for manufacturing hybrid structures were determined."}],"publication":"The Journal of Adhesion","title":"Adhesion properties of the hybrid system made of laser-structured aluminium EN AW 6082 and CFRP by co-bonding-pressing process","publisher":"Informa UK Limited","date_created":"2023-08-15T10:26:00Z","year":"2023","quality_controlled":"1"},{"publication":"Journal of The Electrochemical Society","type":"journal_article","status":"public","abstract":[{"lang":"eng","text":"<jats:title>Abstract</jats:title>\r\n               <jats:p>Batteries capable of extreme fast-charging (XFC) are a necessity for the deployment of electric vehicles. Material properties of electrodes and electrolytes along with cell parameters such as stack pressure and temperature have coupled, synergistic, and sometimes deleterious effects on fast-charging performance. We develop a new experimental testbed that allows precise and conformal application of electrode stack pressure. We focus on cell capacity degradation using single-layer pouch cells with graphite anodes, LiNi0.5Mn0.3Co0.2O2 (NMC532) cathodes, and carbonate-based electrolyte. In the tested range (10 – 125 psi), cells cycled at higher pressure show higher capacity and less capacity fading. Additionally, Li plating decreases with increasing pressure as observed with scanning electron microscopy (SEM) and optical imaging. While the loss of Li inventory from Li plating is the largest contributor to capacity fade, electrochemical and SEM examination of the NMC cathodes after XFC experiments show increased secondary particle damage at lower pressure. We infer that the better performance at higher pressure is due to more homogenous reactions of active materials across the electrode and less polarization through the electrode thickness. Our study emphasizes the importance of electrode stack pressure in XFC batteries and highlights its subtle role in cell conditions.</jats:p>"}],"department":[{"_id":"633"}],"user_id":"84268","_id":"30920","language":[{"iso":"eng"}],"keyword":["Materials Chemistry","Electrochemistry","Surfaces","Coatings and Films","Condensed Matter Physics","Renewable Energy","Sustainability and the Environment","Electronic","Optical and Magnetic Materials"],"publication_identifier":{"issn":["0013-4651","1945-7111"]},"publication_status":"published","page":"040540","intvolume":"       169","citation":{"mla":"Cao, Chuntian, et al. “Conformal Pressure and Fast-Charging Li-Ion Batteries.” <i>Journal of The Electrochemical Society</i>, vol. 169, The Electrochemical Society, 2022, p. 040540, doi:<a href=\"https://doi.org/10.1149/1945-7111/ac653f\">10.1149/1945-7111/ac653f</a>.","bibtex":"@article{Cao_Steinrück_Paul_Dunlop_Trask_Jansen_Kasse_Thampy_Yusuf_Nelson Weker_et al._2022, title={Conformal Pressure and Fast-Charging Li-Ion Batteries}, volume={169}, DOI={<a href=\"https://doi.org/10.1149/1945-7111/ac653f\">10.1149/1945-7111/ac653f</a>}, journal={Journal of The Electrochemical Society}, publisher={The Electrochemical Society}, author={Cao, Chuntian and Steinrück, Hans-Georg and Paul, Partha P and Dunlop, Alison R. and Trask, Stephen E. and Jansen, Andrew and Kasse, Robert M and Thampy, Vivek and Yusuf, Maha and Nelson Weker, Johanna and et al.}, year={2022}, pages={040540} }","short":"C. Cao, H.-G. Steinrück, P.P. Paul, A.R. Dunlop, S.E. Trask, A. Jansen, R.M. Kasse, V. Thampy, M. Yusuf, J. Nelson Weker, B. Shyam, R. Subbaraman, K. Davis, C.M. Johnston, C.J. Takacs, M. Toney, Journal of The Electrochemical Society 169 (2022) 040540.","apa":"Cao, C., Steinrück, H.-G., Paul, P. P., Dunlop, A. R., Trask, S. E., Jansen, A., Kasse, R. M., Thampy, V., Yusuf, M., Nelson Weker, J., Shyam, B., Subbaraman, R., Davis, K., Johnston, C. M., Takacs, C. J., &#38; Toney, M. (2022). Conformal Pressure and Fast-Charging Li-Ion Batteries. <i>Journal of The Electrochemical Society</i>, <i>169</i>, 040540. <a href=\"https://doi.org/10.1149/1945-7111/ac653f\">https://doi.org/10.1149/1945-7111/ac653f</a>","ieee":"C. Cao <i>et al.</i>, “Conformal Pressure and Fast-Charging Li-Ion Batteries,” <i>Journal of The Electrochemical Society</i>, vol. 169, p. 040540, 2022, doi: <a href=\"https://doi.org/10.1149/1945-7111/ac653f\">10.1149/1945-7111/ac653f</a>.","chicago":"Cao, Chuntian, Hans-Georg Steinrück, Partha P Paul, Alison R. Dunlop, Stephen E. Trask, Andrew Jansen, Robert M Kasse, et al. “Conformal Pressure and Fast-Charging Li-Ion Batteries.” <i>Journal of The Electrochemical Society</i> 169 (2022): 040540. <a href=\"https://doi.org/10.1149/1945-7111/ac653f\">https://doi.org/10.1149/1945-7111/ac653f</a>.","ama":"Cao C, Steinrück H-G, Paul PP, et al. Conformal Pressure and Fast-Charging Li-Ion Batteries. <i>Journal of The Electrochemical Society</i>. 2022;169:040540. doi:<a href=\"https://doi.org/10.1149/1945-7111/ac653f\">10.1149/1945-7111/ac653f</a>"},"year":"2022","volume":169,"author":[{"first_name":"Chuntian","full_name":"Cao, Chuntian","last_name":"Cao"},{"orcid":"0000-0001-6373-0877","last_name":"Steinrück","id":"84268","full_name":"Steinrück, Hans-Georg","first_name":"Hans-Georg"},{"first_name":"Partha P","last_name":"Paul","full_name":"Paul, Partha P"},{"first_name":"Alison R.","last_name":"Dunlop","full_name":"Dunlop, Alison R."},{"full_name":"Trask, Stephen E.","last_name":"Trask","first_name":"Stephen E."},{"full_name":"Jansen, Andrew","last_name":"Jansen","first_name":"Andrew"},{"full_name":"Kasse, Robert M","last_name":"Kasse","first_name":"Robert M"},{"first_name":"Vivek","last_name":"Thampy","full_name":"Thampy, Vivek"},{"first_name":"Maha","full_name":"Yusuf, Maha","last_name":"Yusuf"},{"first_name":"Johanna","last_name":"Nelson Weker","full_name":"Nelson Weker, Johanna"},{"first_name":"Badri","last_name":"Shyam","full_name":"Shyam, Badri"},{"full_name":"Subbaraman, Ram","last_name":"Subbaraman","first_name":"Ram"},{"full_name":"Davis, Kelly","last_name":"Davis","first_name":"Kelly"},{"last_name":"Johnston","full_name":"Johnston, Christina M","first_name":"Christina M"},{"first_name":"Christopher J","full_name":"Takacs, Christopher J","last_name":"Takacs"},{"first_name":"Michael","last_name":"Toney","full_name":"Toney, Michael"}],"date_created":"2022-04-20T06:37:40Z","publisher":"The Electrochemical Society","date_updated":"2022-04-20T06:38:37Z","doi":"10.1149/1945-7111/ac653f","title":"Conformal Pressure and Fast-Charging Li-Ion Batteries"},{"publisher":"Springer Science and Business Media LLC","date_updated":"2022-04-20T07:59:08Z","date_created":"2022-04-20T07:55:17Z","author":[{"first_name":"Steffen","full_name":"Wackenrohr, Steffen","last_name":"Wackenrohr"},{"full_name":"Torrent, Christof Johannes Jaime","last_name":"Torrent","first_name":"Christof Johannes Jaime"},{"first_name":"Sebastian","full_name":"Herbst, Sebastian","last_name":"Herbst"},{"last_name":"Nürnberger","full_name":"Nürnberger, Florian","first_name":"Florian"},{"full_name":"Krooss, Philipp","last_name":"Krooss","first_name":"Philipp"},{"first_name":"Christoph","last_name":"Ebbert","full_name":"Ebbert, Christoph"},{"full_name":"Voigt, Markus","id":"15182","last_name":"Voigt","first_name":"Markus"},{"first_name":"Guido","last_name":"Grundmeier","full_name":"Grundmeier, Guido","id":"194"},{"full_name":"Niendorf, Thomas","last_name":"Niendorf","first_name":"Thomas"},{"full_name":"Maier, Hans Jürgen","last_name":"Maier","first_name":"Hans Jürgen"}],"volume":6,"title":"Corrosion fatigue behavior of electron beam melted iron in simulated body fluid","doi":"10.1038/s41529-022-00226-4","publication_status":"published","publication_identifier":{"issn":["2397-2106"]},"issue":"1","year":"2022","citation":{"apa":"Wackenrohr, S., Torrent, C. J. J., Herbst, S., Nürnberger, F., Krooss, P., Ebbert, C., Voigt, M., Grundmeier, G., Niendorf, T., &#38; Maier, H. J. (2022). Corrosion fatigue behavior of electron beam melted iron in simulated body fluid. <i>Npj Materials Degradation</i>, <i>6</i>(1), Article 18. <a href=\"https://doi.org/10.1038/s41529-022-00226-4\">https://doi.org/10.1038/s41529-022-00226-4</a>","mla":"Wackenrohr, Steffen, et al. “Corrosion Fatigue Behavior of Electron Beam Melted Iron in Simulated Body Fluid.” <i>Npj Materials Degradation</i>, vol. 6, no. 1, 18, Springer Science and Business Media LLC, 2022, doi:<a href=\"https://doi.org/10.1038/s41529-022-00226-4\">10.1038/s41529-022-00226-4</a>.","short":"S. Wackenrohr, C.J.J. Torrent, S. Herbst, F. Nürnberger, P. Krooss, C. Ebbert, M. Voigt, G. Grundmeier, T. Niendorf, H.J. Maier, Npj Materials Degradation 6 (2022).","bibtex":"@article{Wackenrohr_Torrent_Herbst_Nürnberger_Krooss_Ebbert_Voigt_Grundmeier_Niendorf_Maier_2022, title={Corrosion fatigue behavior of electron beam melted iron in simulated body fluid}, volume={6}, DOI={<a href=\"https://doi.org/10.1038/s41529-022-00226-4\">10.1038/s41529-022-00226-4</a>}, number={118}, journal={npj Materials Degradation}, publisher={Springer Science and Business Media LLC}, author={Wackenrohr, Steffen and Torrent, Christof Johannes Jaime and Herbst, Sebastian and Nürnberger, Florian and Krooss, Philipp and Ebbert, Christoph and Voigt, Markus and Grundmeier, Guido and Niendorf, Thomas and Maier, Hans Jürgen}, year={2022} }","chicago":"Wackenrohr, Steffen, Christof Johannes Jaime Torrent, Sebastian Herbst, Florian Nürnberger, Philipp Krooss, Christoph Ebbert, Markus Voigt, Guido Grundmeier, Thomas Niendorf, and Hans Jürgen Maier. “Corrosion Fatigue Behavior of Electron Beam Melted Iron in Simulated Body Fluid.” <i>Npj Materials Degradation</i> 6, no. 1 (2022). <a href=\"https://doi.org/10.1038/s41529-022-00226-4\">https://doi.org/10.1038/s41529-022-00226-4</a>.","ieee":"S. Wackenrohr <i>et al.</i>, “Corrosion fatigue behavior of electron beam melted iron in simulated body fluid,” <i>npj Materials Degradation</i>, vol. 6, no. 1, Art. no. 18, 2022, doi: <a href=\"https://doi.org/10.1038/s41529-022-00226-4\">10.1038/s41529-022-00226-4</a>.","ama":"Wackenrohr S, Torrent CJJ, Herbst S, et al. Corrosion fatigue behavior of electron beam melted iron in simulated body fluid. <i>npj Materials Degradation</i>. 2022;6(1). doi:<a href=\"https://doi.org/10.1038/s41529-022-00226-4\">10.1038/s41529-022-00226-4</a>"},"intvolume":"         6","_id":"30922","user_id":"7266","department":[{"_id":"35"},{"_id":"302"},{"_id":"321"}],"article_number":"18","keyword":["Materials Chemistry","Materials Science (miscellaneous)","Chemistry (miscellaneous)","Ceramics and Composites"],"language":[{"iso":"eng"}],"type":"journal_article","publication":"npj Materials Degradation","abstract":[{"lang":"eng","text":"<jats:title>Abstract</jats:title><jats:p>Pure iron is very attractive as a biodegradable implant material due to its high biocompatibility. In combination with additive manufacturing, which facilitates great flexibility of the implant design, it is possible to selectively adjust the microstructure of the material in the process, thereby control the corrosion and fatigue behavior. In the present study, conventional hot-rolled (HR) pure iron is compared to pure iron manufactured by electron beam melting (EBM). The microstructure, the corrosion behavior and the fatigue properties were studied comprehensively. The investigated sample conditions showed significant differences in the microstructures that led to changes in corrosion and fatigue properties. The EBM iron showed significantly lower fatigue strength compared to the HR iron. These different fatigue responses were observed under purely mechanical loading as well as with superimposed corrosion influence and are summarized in a model that describes the underlying failure mechanisms.</jats:p>"}],"status":"public"},{"type":"journal_article","publication":"Journal of Crystal Growth","status":"public","_id":"32108","user_id":"42514","department":[{"_id":"15"},{"_id":"230"}],"article_number":"126756","keyword":["Materials Chemistry","Inorganic Chemistry","Condensed Matter Physics"],"language":[{"iso":"eng"}],"publication_status":"published","publication_identifier":{"issn":["0022-0248"]},"year":"2022","citation":{"apa":"Henksmeier, T., Schulz, J. F., Kluth, E., Feneberg, M., Goldhahn, R., Sanchez, A. M., Voigt, M., Grundmeier, G., &#38; Reuter, D. (2022). Remote epitaxy of InxGa1-xAs (0 0 1) on graphene covered GaAs(0 0 1) substrates. <i>Journal of Crystal Growth</i>, <i>593</i>, Article 126756. <a href=\"https://doi.org/10.1016/j.jcrysgro.2022.126756\">https://doi.org/10.1016/j.jcrysgro.2022.126756</a>","mla":"Henksmeier, T., et al. “Remote Epitaxy of InxGa1-XAs (0 0 1) on Graphene Covered GaAs(0 0 1) Substrates.” <i>Journal of Crystal Growth</i>, vol. 593, 126756, Elsevier BV, 2022, doi:<a href=\"https://doi.org/10.1016/j.jcrysgro.2022.126756\">10.1016/j.jcrysgro.2022.126756</a>.","short":"T. Henksmeier, J.F. Schulz, E. Kluth, M. Feneberg, R. Goldhahn, A.M. Sanchez, M. Voigt, G. Grundmeier, D. Reuter, Journal of Crystal Growth 593 (2022).","bibtex":"@article{Henksmeier_Schulz_Kluth_Feneberg_Goldhahn_Sanchez_Voigt_Grundmeier_Reuter_2022, title={Remote epitaxy of InxGa1-xAs (0 0 1) on graphene covered GaAs(0 0 1) substrates}, volume={593}, DOI={<a href=\"https://doi.org/10.1016/j.jcrysgro.2022.126756\">10.1016/j.jcrysgro.2022.126756</a>}, number={126756}, journal={Journal of Crystal Growth}, publisher={Elsevier BV}, author={Henksmeier, T. and Schulz, J.F. and Kluth, E. and Feneberg, M. and Goldhahn, R. and Sanchez, A.M. and Voigt, M. and Grundmeier, Guido and Reuter, Dirk}, year={2022} }","ieee":"T. Henksmeier <i>et al.</i>, “Remote epitaxy of InxGa1-xAs (0 0 1) on graphene covered GaAs(0 0 1) substrates,” <i>Journal of Crystal Growth</i>, vol. 593, Art. no. 126756, 2022, doi: <a href=\"https://doi.org/10.1016/j.jcrysgro.2022.126756\">10.1016/j.jcrysgro.2022.126756</a>.","chicago":"Henksmeier, T., J.F. Schulz, E. Kluth, M. Feneberg, R. Goldhahn, A.M. Sanchez, M. Voigt, Guido Grundmeier, and Dirk Reuter. “Remote Epitaxy of InxGa1-XAs (0 0 1) on Graphene Covered GaAs(0 0 1) Substrates.” <i>Journal of Crystal Growth</i> 593 (2022). <a href=\"https://doi.org/10.1016/j.jcrysgro.2022.126756\">https://doi.org/10.1016/j.jcrysgro.2022.126756</a>.","ama":"Henksmeier T, Schulz JF, Kluth E, et al. Remote epitaxy of InxGa1-xAs (0 0 1) on graphene covered GaAs(0 0 1) substrates. <i>Journal of Crystal Growth</i>. 2022;593. doi:<a href=\"https://doi.org/10.1016/j.jcrysgro.2022.126756\">10.1016/j.jcrysgro.2022.126756</a>"},"intvolume":"       593","publisher":"Elsevier BV","date_updated":"2022-06-23T06:18:32Z","author":[{"last_name":"Henksmeier","full_name":"Henksmeier, T.","first_name":"T."},{"full_name":"Schulz, J.F.","last_name":"Schulz","first_name":"J.F."},{"full_name":"Kluth, E.","last_name":"Kluth","first_name":"E."},{"full_name":"Feneberg, M.","last_name":"Feneberg","first_name":"M."},{"full_name":"Goldhahn, R.","last_name":"Goldhahn","first_name":"R."},{"first_name":"A.M.","full_name":"Sanchez, A.M.","last_name":"Sanchez"},{"first_name":"M.","full_name":"Voigt, M.","last_name":"Voigt"},{"first_name":"Guido","last_name":"Grundmeier","full_name":"Grundmeier, Guido","id":"194"},{"last_name":"Reuter","id":"37763","full_name":"Reuter, Dirk","first_name":"Dirk"}],"date_created":"2022-06-23T06:17:32Z","volume":593,"title":"Remote epitaxy of InxGa1-xAs (0 0 1) on graphene covered GaAs(0 0 1) substrates","doi":"10.1016/j.jcrysgro.2022.126756"},{"keyword":["Materials Chemistry","Metals and Alloys","Surfaces","Coatings and Films","Mechanical Engineering","Mechanics of Materials","Environmental Chemistry","Materials Chemistry","Metals and Alloys","Surfaces","Coatings and Films","Mechanical Engineering","Mechanics of Materials","Environmental Chemistry","Materials Chemistry","Metals and Alloys","Surfaces","Coatings and Films","Mechanical Engineering","Mechanics of Materials","Environmental Chemistry"],"language":[{"iso":"eng"}],"_id":"29806","user_id":"48864","department":[{"_id":"302"}],"status":"public","type":"journal_article","publication":"Materials and Corrosion","title":"Influence of hydrogel coatings on corrosion and fatigue of iron in simulated body fluid","doi":"10.1002/maco.202112841","date_updated":"2022-07-05T09:17:29Z","publisher":"Wiley","author":[{"first_name":"Jingyuan","full_name":"Huang, Jingyuan","last_name":"Huang"},{"id":"15182","full_name":"Voigt, Markus","last_name":"Voigt","first_name":"Markus"},{"first_name":"Steffen","full_name":"Wackenrohr, Steffen","last_name":"Wackenrohr"},{"first_name":"Christoph","id":"7266","full_name":"Ebbert, Christoph","last_name":"Ebbert"},{"id":"48864","full_name":"Keller, Adrian","orcid":"0000-0001-7139-3110","last_name":"Keller","first_name":"Adrian"},{"first_name":"Hans Jürgen","full_name":"Maier, Hans Jürgen","last_name":"Maier"},{"first_name":"Guido","full_name":"Grundmeier, Guido","id":"194","last_name":"Grundmeier"}],"date_created":"2022-02-11T07:52:48Z","volume":73,"year":"2022","citation":{"ama":"Huang J, Voigt M, Wackenrohr S, et al. Influence of hydrogel coatings on corrosion and fatigue of iron in simulated body fluid. <i>Materials and Corrosion</i>. 2022;73:1034. doi:<a href=\"https://doi.org/10.1002/maco.202112841\">10.1002/maco.202112841</a>","apa":"Huang, J., Voigt, M., Wackenrohr, S., Ebbert, C., Keller, A., Maier, H. J., &#38; Grundmeier, G. (2022). Influence of hydrogel coatings on corrosion and fatigue of iron in simulated body fluid. <i>Materials and Corrosion</i>, <i>73</i>, 1034. <a href=\"https://doi.org/10.1002/maco.202112841\">https://doi.org/10.1002/maco.202112841</a>","short":"J. Huang, M. Voigt, S. Wackenrohr, C. Ebbert, A. Keller, H.J. Maier, G. Grundmeier, Materials and Corrosion 73 (2022) 1034.","bibtex":"@article{Huang_Voigt_Wackenrohr_Ebbert_Keller_Maier_Grundmeier_2022, title={Influence of hydrogel coatings on corrosion and fatigue of iron in simulated body fluid}, volume={73}, DOI={<a href=\"https://doi.org/10.1002/maco.202112841\">10.1002/maco.202112841</a>}, journal={Materials and Corrosion}, publisher={Wiley}, author={Huang, Jingyuan and Voigt, Markus and Wackenrohr, Steffen and Ebbert, Christoph and Keller, Adrian and Maier, Hans Jürgen and Grundmeier, Guido}, year={2022}, pages={1034} }","mla":"Huang, Jingyuan, et al. “Influence of Hydrogel Coatings on Corrosion and Fatigue of Iron in Simulated Body Fluid.” <i>Materials and Corrosion</i>, vol. 73, Wiley, 2022, p. 1034, doi:<a href=\"https://doi.org/10.1002/maco.202112841\">10.1002/maco.202112841</a>.","chicago":"Huang, Jingyuan, Markus Voigt, Steffen Wackenrohr, Christoph Ebbert, Adrian Keller, Hans Jürgen Maier, and Guido Grundmeier. “Influence of Hydrogel Coatings on Corrosion and Fatigue of Iron in Simulated Body Fluid.” <i>Materials and Corrosion</i> 73 (2022): 1034. <a href=\"https://doi.org/10.1002/maco.202112841\">https://doi.org/10.1002/maco.202112841</a>.","ieee":"J. Huang <i>et al.</i>, “Influence of hydrogel coatings on corrosion and fatigue of iron in simulated body fluid,” <i>Materials and Corrosion</i>, vol. 73, p. 1034, 2022, doi: <a href=\"https://doi.org/10.1002/maco.202112841\">10.1002/maco.202112841</a>."},"intvolume":"        73","page":"1034","publication_status":"published","publication_identifier":{"issn":["0947-5117","1521-4176"]}},{"title":"Low Areal Densities of InAs Quantum Dots on GaAs(100) Prepared by Molecular Beam Epitaxy","doi":"10.1016/j.jcrysgro.2022.126715","publisher":"Elsevier BV","date_updated":"2022-05-13T06:12:40Z","date_created":"2022-05-13T06:11:50Z","author":[{"full_name":"Verma, A.K.","last_name":"Verma","first_name":"A.K."},{"first_name":"F.","last_name":"Bopp","full_name":"Bopp, F."},{"last_name":"Finley","full_name":"Finley, J.J.","first_name":"J.J."},{"full_name":"Jonas, B.","last_name":"Jonas","first_name":"B."},{"first_name":"A.","last_name":"Zrenner","full_name":"Zrenner, A."},{"full_name":"Reuter, Dirk","id":"37763","last_name":"Reuter","first_name":"Dirk"}],"year":"2022","citation":{"short":"A.K. Verma, F. Bopp, J.J. Finley, B. Jonas, A. Zrenner, D. Reuter, Journal of Crystal Growth (2022).","bibtex":"@article{Verma_Bopp_Finley_Jonas_Zrenner_Reuter_2022, title={Low Areal Densities of InAs Quantum Dots on GaAs(100) Prepared by Molecular Beam Epitaxy}, DOI={<a href=\"https://doi.org/10.1016/j.jcrysgro.2022.126715\">10.1016/j.jcrysgro.2022.126715</a>}, number={126715}, journal={Journal of Crystal Growth}, publisher={Elsevier BV}, author={Verma, A.K. and Bopp, F. and Finley, J.J. and Jonas, B. and Zrenner, A. and Reuter, Dirk}, year={2022} }","mla":"Verma, A. K., et al. “Low Areal Densities of InAs Quantum Dots on GaAs(100) Prepared by Molecular Beam Epitaxy.” <i>Journal of Crystal Growth</i>, 126715, Elsevier BV, 2022, doi:<a href=\"https://doi.org/10.1016/j.jcrysgro.2022.126715\">10.1016/j.jcrysgro.2022.126715</a>.","apa":"Verma, A. K., Bopp, F., Finley, J. J., Jonas, B., Zrenner, A., &#38; Reuter, D. (2022). Low Areal Densities of InAs Quantum Dots on GaAs(100) Prepared by Molecular Beam Epitaxy. <i>Journal of Crystal Growth</i>, Article 126715. <a href=\"https://doi.org/10.1016/j.jcrysgro.2022.126715\">https://doi.org/10.1016/j.jcrysgro.2022.126715</a>","ieee":"A. K. Verma, F. Bopp, J. J. Finley, B. Jonas, A. Zrenner, and D. Reuter, “Low Areal Densities of InAs Quantum Dots on GaAs(100) Prepared by Molecular Beam Epitaxy,” <i>Journal of Crystal Growth</i>, Art. no. 126715, 2022, doi: <a href=\"https://doi.org/10.1016/j.jcrysgro.2022.126715\">10.1016/j.jcrysgro.2022.126715</a>.","chicago":"Verma, A.K., F. Bopp, J.J. Finley, B. Jonas, A. Zrenner, and Dirk Reuter. “Low Areal Densities of InAs Quantum Dots on GaAs(100) Prepared by Molecular Beam Epitaxy.” <i>Journal of Crystal Growth</i>, 2022. <a href=\"https://doi.org/10.1016/j.jcrysgro.2022.126715\">https://doi.org/10.1016/j.jcrysgro.2022.126715</a>.","ama":"Verma AK, Bopp F, Finley JJ, Jonas B, Zrenner A, Reuter D. Low Areal Densities of InAs Quantum Dots on GaAs(100) Prepared by Molecular Beam Epitaxy. <i>Journal of Crystal Growth</i>. Published online 2022. doi:<a href=\"https://doi.org/10.1016/j.jcrysgro.2022.126715\">10.1016/j.jcrysgro.2022.126715</a>"},"publication_status":"published","publication_identifier":{"issn":["0022-0248"]},"article_number":"126715","keyword":["Materials Chemistry","Inorganic Chemistry","Condensed Matter Physics"],"language":[{"iso":"eng"}],"_id":"31241","user_id":"42514","department":[{"_id":"15"},{"_id":"230"}],"status":"public","type":"journal_article","publication":"Journal of Crystal Growth"},{"language":[{"iso":"eng"}],"keyword":["Electrical and Electronic Engineering","Materials Chemistry","Electrochemistry","Energy Engineering and Power Technology","Chemical Engineering (miscellaneous)"],"user_id":"84268","department":[{"_id":"633"}],"_id":"32764","status":"public","type":"journal_article","publication":"ACS Applied Energy Materials","doi":"10.1021/acsaem.2c00806","title":"Combined Effects of Uniform Applied Pressure and Electrolyte Additives in Lithium-Metal Batteries","author":[{"first_name":"Robert M.","last_name":"Kasse","full_name":"Kasse, Robert M."},{"full_name":"Geise, Natalie R.","last_name":"Geise","first_name":"Natalie R."},{"full_name":"Sebti, Elias","last_name":"Sebti","first_name":"Elias"},{"full_name":"Lim, Kipil","last_name":"Lim","first_name":"Kipil"},{"last_name":"Takacs","full_name":"Takacs, Christopher J.","first_name":"Christopher J."},{"first_name":"Chuntian","last_name":"Cao","full_name":"Cao, Chuntian"},{"last_name":"Steinrück","orcid":"0000-0001-6373-0877","id":"84268","full_name":"Steinrück, Hans-Georg","first_name":"Hans-Georg"},{"last_name":"Toney","full_name":"Toney, Michael F.","first_name":"Michael F."}],"date_created":"2022-08-09T19:57:18Z","volume":5,"date_updated":"2022-08-09T19:57:44Z","publisher":"American Chemical Society (ACS)","citation":{"apa":"Kasse, R. M., Geise, N. R., Sebti, E., Lim, K., Takacs, C. J., Cao, C., Steinrück, H.-G., &#38; Toney, M. F. (2022). Combined Effects of Uniform Applied Pressure and Electrolyte Additives in Lithium-Metal Batteries. <i>ACS Applied Energy Materials</i>, <i>5</i>(7), 8273–8281. <a href=\"https://doi.org/10.1021/acsaem.2c00806\">https://doi.org/10.1021/acsaem.2c00806</a>","mla":"Kasse, Robert M., et al. “Combined Effects of Uniform Applied Pressure and Electrolyte Additives in Lithium-Metal Batteries.” <i>ACS Applied Energy Materials</i>, vol. 5, no. 7, American Chemical Society (ACS), 2022, pp. 8273–81, doi:<a href=\"https://doi.org/10.1021/acsaem.2c00806\">10.1021/acsaem.2c00806</a>.","short":"R.M. Kasse, N.R. Geise, E. Sebti, K. Lim, C.J. Takacs, C. Cao, H.-G. Steinrück, M.F. Toney, ACS Applied Energy Materials 5 (2022) 8273–8281.","bibtex":"@article{Kasse_Geise_Sebti_Lim_Takacs_Cao_Steinrück_Toney_2022, title={Combined Effects of Uniform Applied Pressure and Electrolyte Additives in Lithium-Metal Batteries}, volume={5}, DOI={<a href=\"https://doi.org/10.1021/acsaem.2c00806\">10.1021/acsaem.2c00806</a>}, number={7}, journal={ACS Applied Energy Materials}, publisher={American Chemical Society (ACS)}, author={Kasse, Robert M. and Geise, Natalie R. and Sebti, Elias and Lim, Kipil and Takacs, Christopher J. and Cao, Chuntian and Steinrück, Hans-Georg and Toney, Michael F.}, year={2022}, pages={8273–8281} }","ama":"Kasse RM, Geise NR, Sebti E, et al. Combined Effects of Uniform Applied Pressure and Electrolyte Additives in Lithium-Metal Batteries. <i>ACS Applied Energy Materials</i>. 2022;5(7):8273-8281. doi:<a href=\"https://doi.org/10.1021/acsaem.2c00806\">10.1021/acsaem.2c00806</a>","chicago":"Kasse, Robert M., Natalie R. Geise, Elias Sebti, Kipil Lim, Christopher J. Takacs, Chuntian Cao, Hans-Georg Steinrück, and Michael F. Toney. “Combined Effects of Uniform Applied Pressure and Electrolyte Additives in Lithium-Metal Batteries.” <i>ACS Applied Energy Materials</i> 5, no. 7 (2022): 8273–81. <a href=\"https://doi.org/10.1021/acsaem.2c00806\">https://doi.org/10.1021/acsaem.2c00806</a>.","ieee":"R. M. Kasse <i>et al.</i>, “Combined Effects of Uniform Applied Pressure and Electrolyte Additives in Lithium-Metal Batteries,” <i>ACS Applied Energy Materials</i>, vol. 5, no. 7, pp. 8273–8281, 2022, doi: <a href=\"https://doi.org/10.1021/acsaem.2c00806\">10.1021/acsaem.2c00806</a>."},"page":"8273-8281","intvolume":"         5","year":"2022","issue":"7","publication_status":"published","publication_identifier":{"issn":["2574-0962","2574-0962"]}},{"publication_identifier":{"issn":["0953-2048","1361-6668"]},"publication_status":"published","intvolume":"        35","citation":{"chicago":"Protte, Maximilian, Varun B Verma, Jan Philipp Höpker, Richard P Mirin, Sae Woo Nam, and Tim Bartley. “Laser-Lithographically Written Micron-Wide Superconducting Nanowire Single-Photon Detectors.” <i>Superconductor Science and Technology</i> 35, no. 5 (2022). <a href=\"https://doi.org/10.1088/1361-6668/ac5338\">https://doi.org/10.1088/1361-6668/ac5338</a>.","ieee":"M. Protte, V. B. Verma, J. P. Höpker, R. P. Mirin, S. Woo Nam, and T. Bartley, “Laser-lithographically written micron-wide superconducting nanowire single-photon detectors,” <i>Superconductor Science and Technology</i>, vol. 35, no. 5, Art. no. 055005, 2022, doi: <a href=\"https://doi.org/10.1088/1361-6668/ac5338\">10.1088/1361-6668/ac5338</a>.","ama":"Protte M, Verma VB, Höpker JP, Mirin RP, Woo Nam S, Bartley T. Laser-lithographically written micron-wide superconducting nanowire single-photon detectors. <i>Superconductor Science and Technology</i>. 2022;35(5). doi:<a href=\"https://doi.org/10.1088/1361-6668/ac5338\">10.1088/1361-6668/ac5338</a>","apa":"Protte, M., Verma, V. B., Höpker, J. P., Mirin, R. P., Woo Nam, S., &#38; Bartley, T. (2022). Laser-lithographically written micron-wide superconducting nanowire single-photon detectors. <i>Superconductor Science and Technology</i>, <i>35</i>(5), Article 055005. <a href=\"https://doi.org/10.1088/1361-6668/ac5338\">https://doi.org/10.1088/1361-6668/ac5338</a>","short":"M. Protte, V.B. Verma, J.P. Höpker, R.P. Mirin, S. Woo Nam, T. Bartley, Superconductor Science and Technology 35 (2022).","mla":"Protte, Maximilian, et al. “Laser-Lithographically Written Micron-Wide Superconducting Nanowire Single-Photon Detectors.” <i>Superconductor Science and Technology</i>, vol. 35, no. 5, 055005, IOP Publishing, 2022, doi:<a href=\"https://doi.org/10.1088/1361-6668/ac5338\">10.1088/1361-6668/ac5338</a>.","bibtex":"@article{Protte_Verma_Höpker_Mirin_Woo Nam_Bartley_2022, title={Laser-lithographically written micron-wide superconducting nanowire single-photon detectors}, volume={35}, DOI={<a href=\"https://doi.org/10.1088/1361-6668/ac5338\">10.1088/1361-6668/ac5338</a>}, number={5055005}, journal={Superconductor Science and Technology}, publisher={IOP Publishing}, author={Protte, Maximilian and Verma, Varun B and Höpker, Jan Philipp and Mirin, Richard P and Woo Nam, Sae and Bartley, Tim}, year={2022} }"},"volume":35,"author":[{"first_name":"Maximilian","last_name":"Protte","id":"46170","full_name":"Protte, Maximilian"},{"full_name":"Verma, Varun B","last_name":"Verma","first_name":"Varun B"},{"first_name":"Jan Philipp","full_name":"Höpker, Jan Philipp","id":"33913","last_name":"Höpker"},{"first_name":"Richard P","last_name":"Mirin","full_name":"Mirin, Richard P"},{"last_name":"Woo Nam","full_name":"Woo Nam, Sae","first_name":"Sae"},{"last_name":"Bartley","id":"49683","full_name":"Bartley, Tim","first_name":"Tim"}],"date_updated":"2023-01-12T13:02:52Z","doi":"10.1088/1361-6668/ac5338","type":"journal_article","status":"public","department":[{"_id":"15"},{"_id":"230"},{"_id":"623"}],"user_id":"33913","_id":"33671","article_number":"055005","issue":"5","year":"2022","date_created":"2022-10-11T07:14:11Z","publisher":"IOP Publishing","title":"Laser-lithographically written micron-wide superconducting nanowire single-photon detectors","publication":"Superconductor Science and Technology","abstract":[{"lang":"eng","text":"<jats:title>Abstract</jats:title>\r\n               <jats:p>We demonstrate the fabrication of micron-wide tungsten silicide superconducting nanowire single-photon detectors on a silicon substrate using laser lithography. We show saturated internal detection efficiencies with wire widths ranging from 0.59 <jats:italic>µ</jats:italic>m to 1.43 <jats:italic>µ</jats:italic>m under illumination at 1550 nm. We demonstrate both straight wires, as well as meandered structures. Single-photon sensitivity is shown in devices up to 4 mm in length. Laser-lithographically written devices allow for fast and easy structuring of large areas while maintaining a saturated internal efficiency for wire widths around 1 <jats:italic>µ</jats:italic>m.</jats:p>"}],"language":[{"iso":"eng"}],"keyword":["Materials Chemistry","Electrical and Electronic Engineering","Metals and Alloys","Condensed Matter Physics","Ceramics and Composites"]}]