---
_id: '41517'
abstract:
- lang: eng
text: "AbstractWithin this research, the multiscale
microstructural evolution before and after the tensile test of a FeCo alloy is
addressed. X-ray µ-computer tomography (CT), electron
backscattered diffraction (EBSD), and transmission electron microscopy (TEM) are
employed to determine the microstructure on different length scales. Microstructural
evolution is studied by performing EBSD of the same area before and after the
tensile test. As a result, $$\\langle$$\r\n ⟨\r\n
\ 001$$\\rangle$$\r\n ⟩\r\n
\ ||TD, $$\\langle$$\r\n ⟨\r\n
\ 011$$\\rangle$$\r\n ⟩\r\n
\ ||TD are
hard orientations and $$\\langle$$\r\n ⟨\r\n
\ 111$$\\rangle$$\r\n ⟩\r\n
\ ||TD is soft
orientations for deformation accommodation. It is not possible to predict the
deformation of a single grain with the Taylor model. However, the Taylor model
accurately predicts the orientation of all grains after deformation. {123}$$\\langle$$\r\n ⟨\r\n
\ 111$$\\rangle$$\r\n ⟩\r\n
\ is the most
active slip system, and {112}$$\\langle$$\r\n ⟨\r\n
\ 111$$\\rangle$$\r\n ⟩\r\n
\ is the least
active slip system. Both EBSD micrographs show grain subdivision after tensile
testing. TEM images show the formation of dislocation cells. Correlative HRTEM
images show unresolved lattice fringes at dislocation cell boundaries, whereas
resolved lattice fringes are observed at dislocation cell interior. Since Schmid’s
law is unable to predict the deformation behavior of grains, the boundary slip
transmission accurately predicts the grain deformation behavior."
author:
- first_name: Sudipta
full_name: Pramanik, Sudipta
last_name: Pramanik
- first_name: Lennart
full_name: Tasche, Lennart
id: '71508'
last_name: Tasche
- first_name: Kay-Peter
full_name: Hoyer, Kay-Peter
id: '48411'
last_name: Hoyer
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
citation:
ama: Pramanik S, Tasche L, Hoyer K-P, Schaper M. Correlation between Taylor Model
Prediction and Transmission Electron Microscopy-Based Microstructural Investigations
of Quasi-In Situ Tensile Deformation of Additively Manufactured FeCo Alloy. Journal
of Materials Engineering and Performance. 2021;30(11):8048-8056. doi:10.1007/s11665-021-06065-9
apa: Pramanik, S., Tasche, L., Hoyer, K.-P., & Schaper, M. (2021). Correlation
between Taylor Model Prediction and Transmission Electron Microscopy-Based Microstructural
Investigations of Quasi-In Situ Tensile Deformation of Additively Manufactured
FeCo Alloy. Journal of Materials Engineering and Performance, 30(11),
8048–8056. https://doi.org/10.1007/s11665-021-06065-9
bibtex: '@article{Pramanik_Tasche_Hoyer_Schaper_2021, title={Correlation between
Taylor Model Prediction and Transmission Electron Microscopy-Based Microstructural
Investigations of Quasi-In Situ Tensile Deformation of Additively Manufactured
FeCo Alloy}, volume={30}, DOI={10.1007/s11665-021-06065-9},
number={11}, journal={Journal of Materials Engineering and Performance}, publisher={Springer
Science and Business Media LLC}, author={Pramanik, Sudipta and Tasche, Lennart
and Hoyer, Kay-Peter and Schaper, Mirko}, year={2021}, pages={8048–8056} }'
chicago: 'Pramanik, Sudipta, Lennart Tasche, Kay-Peter Hoyer, and Mirko Schaper.
“Correlation between Taylor Model Prediction and Transmission Electron Microscopy-Based
Microstructural Investigations of Quasi-In Situ Tensile Deformation of Additively
Manufactured FeCo Alloy.” Journal of Materials Engineering and Performance
30, no. 11 (2021): 8048–56. https://doi.org/10.1007/s11665-021-06065-9.'
ieee: 'S. Pramanik, L. Tasche, K.-P. Hoyer, and M. Schaper, “Correlation between
Taylor Model Prediction and Transmission Electron Microscopy-Based Microstructural
Investigations of Quasi-In Situ Tensile Deformation of Additively Manufactured
FeCo Alloy,” Journal of Materials Engineering and Performance, vol. 30,
no. 11, pp. 8048–8056, 2021, doi: 10.1007/s11665-021-06065-9.'
mla: Pramanik, Sudipta, et al. “Correlation between Taylor Model Prediction and
Transmission Electron Microscopy-Based Microstructural Investigations of Quasi-In
Situ Tensile Deformation of Additively Manufactured FeCo Alloy.” Journal of
Materials Engineering and Performance, vol. 30, no. 11, Springer Science and
Business Media LLC, 2021, pp. 8048–56, doi:10.1007/s11665-021-06065-9.
short: S. Pramanik, L. Tasche, K.-P. Hoyer, M. Schaper, Journal of Materials Engineering
and Performance 30 (2021) 8048–8056.
date_created: 2023-02-02T14:39:53Z
date_updated: 2023-06-01T14:36:06Z
department:
- _id: '9'
- _id: '158'
doi: 10.1007/s11665-021-06065-9
intvolume: ' 30'
issue: '11'
keyword:
- Mechanical Engineering
- Mechanics of Materials
- General Materials Science
language:
- iso: eng
page: 8048-8056
publication: Journal of Materials Engineering and Performance
publication_identifier:
issn:
- 1059-9495
- 1544-1024
publication_status: published
publisher: Springer Science and Business Media LLC
quality_controlled: '1'
status: public
title: Correlation between Taylor Model Prediction and Transmission Electron Microscopy-Based
Microstructural Investigations of Quasi-In Situ Tensile Deformation of Additively
Manufactured FeCo Alloy
type: journal_article
user_id: '43720'
volume: 30
year: '2021'
...
---
_id: '29815'
abstract:
- lang: eng
text: 'Aluminium steel clad materials have high potential for industrial
applications. Their mechanical properties are governed by an intermetallic layer,
which forms upon heat treatment at the Al-Fe interface. Transmission electron
microscopy was employed to identify the phases present at the interface by selective
area electron diffraction and energy dispersive spectroscopy. Three phases were
identified: orthorhombic Al5Fe2, monoclinic Al13Fe4 and cubic Al19Fe4MnSi2. An
effective interdiffusion coefficient dependent on concentration was determined
according to the Boltzmann–Matano method. The highest value of the interdiffusion
coefficient was reached at the composition of the intermetallic phases. Afterwards,
the process of diffusion considering the evaluated interdiffusion coefficient
was simulated using the finite element method. Results of the simulations revealed
that growth of the intermetallic phases proceeds preferentially in the direction
of aluminium.'
article_number: '7771'
author:
- first_name: Barbora
full_name: Křivská, Barbora
last_name: Křivská
- first_name: Michaela
full_name: Šlapáková, Michaela
last_name: Šlapáková
- first_name: Jozef
full_name: Veselý, Jozef
last_name: Veselý
- first_name: Martin
full_name: Kihoulou, Martin
last_name: Kihoulou
- first_name: Klaudia
full_name: Fekete, Klaudia
last_name: Fekete
- first_name: Peter
full_name: Minárik, Peter
last_name: Minárik
- first_name: Rostislav
full_name: Králík, Rostislav
last_name: Králík
- first_name: Olexandr
full_name: Grydin, Olexandr
id: '43822'
last_name: Grydin
- first_name: Mykhailo
full_name: Stolbchenko, Mykhailo
last_name: Stolbchenko
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
citation:
ama: Křivská B, Šlapáková M, Veselý J, et al. Intermetallic Phases Identification
and Diffusion Simulation in Twin-Roll Cast Al-Fe Clad Sheet. Materials.
2021;14(24). doi:10.3390/ma14247771
apa: Křivská, B., Šlapáková, M., Veselý, J., Kihoulou, M., Fekete, K., Minárik,
P., Králík, R., Grydin, O., Stolbchenko, M., & Schaper, M. (2021). Intermetallic
Phases Identification and Diffusion Simulation in Twin-Roll Cast Al-Fe Clad Sheet.
Materials, 14(24), Article 7771. https://doi.org/10.3390/ma14247771
bibtex: '@article{Křivská_Šlapáková_Veselý_Kihoulou_Fekete_Minárik_Králík_Grydin_Stolbchenko_Schaper_2021,
title={Intermetallic Phases Identification and Diffusion Simulation in Twin-Roll
Cast Al-Fe Clad Sheet}, volume={14}, DOI={10.3390/ma14247771},
number={247771}, journal={Materials}, publisher={MDPI AG}, author={Křivská, Barbora
and Šlapáková, Michaela and Veselý, Jozef and Kihoulou, Martin and Fekete, Klaudia
and Minárik, Peter and Králík, Rostislav and Grydin, Olexandr and Stolbchenko,
Mykhailo and Schaper, Mirko}, year={2021} }'
chicago: Křivská, Barbora, Michaela Šlapáková, Jozef Veselý, Martin Kihoulou, Klaudia
Fekete, Peter Minárik, Rostislav Králík, Olexandr Grydin, Mykhailo Stolbchenko,
and Mirko Schaper. “Intermetallic Phases Identification and Diffusion Simulation
in Twin-Roll Cast Al-Fe Clad Sheet.” Materials 14, no. 24 (2021). https://doi.org/10.3390/ma14247771.
ieee: 'B. Křivská et al., “Intermetallic Phases Identification and Diffusion
Simulation in Twin-Roll Cast Al-Fe Clad Sheet,” Materials, vol. 14, no.
24, Art. no. 7771, 2021, doi: 10.3390/ma14247771.'
mla: Křivská, Barbora, et al. “Intermetallic Phases Identification and Diffusion
Simulation in Twin-Roll Cast Al-Fe Clad Sheet.” Materials, vol. 14, no.
24, 7771, MDPI AG, 2021, doi:10.3390/ma14247771.
short: B. Křivská, M. Šlapáková, J. Veselý, M. Kihoulou, K. Fekete, P. Minárik,
R. Králík, O. Grydin, M. Stolbchenko, M. Schaper, Materials 14 (2021).
date_created: 2022-02-11T17:40:03Z
date_updated: 2023-06-01T14:38:18Z
department:
- _id: '158'
doi: 10.3390/ma14247771
intvolume: ' 14'
issue: '24'
keyword:
- General Materials Science
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.mdpi.com/1996-1944/14/24/7771/htm
oa: '1'
publication: Materials
publication_identifier:
issn:
- 1996-1944
publication_status: published
publisher: MDPI AG
quality_controlled: '1'
status: public
title: Intermetallic Phases Identification and Diffusion Simulation in Twin-Roll Cast
Al-Fe Clad Sheet
type: journal_article
user_id: '43720'
volume: 14
year: '2021'
...
---
_id: '41515'
article_number: '102087'
author:
- first_name: Sudipta
full_name: Pramanik, Sudipta
last_name: Pramanik
- first_name: Lennart
full_name: Tasche, Lennart
id: '71508'
last_name: Tasche
- first_name: Kay-Peter
full_name: Hoyer, Kay-Peter
id: '48411'
last_name: Hoyer
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
citation:
ama: 'Pramanik S, Tasche L, Hoyer K-P, Schaper M. Investigating the microstructure
of an additively manufactured FeCo alloy: an electron microscopy study. Additive
Manufacturing. 2021;46. doi:10.1016/j.addma.2021.102087'
apa: 'Pramanik, S., Tasche, L., Hoyer, K.-P., & Schaper, M. (2021). Investigating
the microstructure of an additively manufactured FeCo alloy: an electron microscopy
study. Additive Manufacturing, 46, Article 102087. https://doi.org/10.1016/j.addma.2021.102087'
bibtex: '@article{Pramanik_Tasche_Hoyer_Schaper_2021, title={Investigating the microstructure
of an additively manufactured FeCo alloy: an electron microscopy study}, volume={46},
DOI={10.1016/j.addma.2021.102087},
number={102087}, journal={Additive Manufacturing}, publisher={Elsevier BV}, author={Pramanik,
Sudipta and Tasche, Lennart and Hoyer, Kay-Peter and Schaper, Mirko}, year={2021}
}'
chicago: 'Pramanik, Sudipta, Lennart Tasche, Kay-Peter Hoyer, and Mirko Schaper.
“Investigating the Microstructure of an Additively Manufactured FeCo Alloy: An
Electron Microscopy Study.” Additive Manufacturing 46 (2021). https://doi.org/10.1016/j.addma.2021.102087.'
ieee: 'S. Pramanik, L. Tasche, K.-P. Hoyer, and M. Schaper, “Investigating the microstructure
of an additively manufactured FeCo alloy: an electron microscopy study,” Additive
Manufacturing, vol. 46, Art. no. 102087, 2021, doi: 10.1016/j.addma.2021.102087.'
mla: 'Pramanik, Sudipta, et al. “Investigating the Microstructure of an Additively
Manufactured FeCo Alloy: An Electron Microscopy Study.” Additive Manufacturing,
vol. 46, 102087, Elsevier BV, 2021, doi:10.1016/j.addma.2021.102087.'
short: S. Pramanik, L. Tasche, K.-P. Hoyer, M. Schaper, Additive Manufacturing 46
(2021).
date_created: 2023-02-02T14:35:02Z
date_updated: 2023-06-01T14:35:58Z
department:
- _id: '9'
- _id: '158'
doi: 10.1016/j.addma.2021.102087
intvolume: ' 46'
keyword:
- Industrial and Manufacturing Engineering
- Engineering (miscellaneous)
- General Materials Science
- Biomedical Engineering
language:
- iso: eng
publication: Additive Manufacturing
publication_identifier:
issn:
- 2214-8604
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: 'Investigating the microstructure of an additively manufactured FeCo alloy:
an electron microscopy study'
type: journal_article
user_id: '43720'
volume: 46
year: '2021'
...
---
_id: '30372'
author:
- first_name: H.M.A
full_name: Zahera, H.M.A
last_name: Zahera
- first_name: Rricha
full_name: Jalota, Rricha
last_name: Jalota
- first_name: Mohamed Ahmed
full_name: Sherif, Mohamed Ahmed
last_name: Sherif
- first_name: Axel-Cyrille Ngonga
full_name: Ngomo, Axel-Cyrille Ngonga
last_name: Ngomo
citation:
ama: 'Zahera HMA, Jalota R, Sherif MA, Ngomo A-CN. I-AID: Identifying Actionable
Information From Disaster-Related Tweets. IEEE Access. 2021;9:118861-118870.
doi:10.1109/access.2021.3107812'
apa: 'Zahera, H. M. A., Jalota, R., Sherif, M. A., & Ngomo, A.-C. N. (2021).
I-AID: Identifying Actionable Information From Disaster-Related Tweets. IEEE
Access, 9, 118861–118870. https://doi.org/10.1109/access.2021.3107812'
bibtex: '@article{Zahera_Jalota_Sherif_Ngomo_2021, title={I-AID: Identifying Actionable
Information From Disaster-Related Tweets}, volume={9}, DOI={10.1109/access.2021.3107812},
journal={IEEE Access}, publisher={Institute of Electrical and Electronics Engineers
(IEEE)}, author={Zahera, H.M.A and Jalota, Rricha and Sherif, Mohamed Ahmed and
Ngomo, Axel-Cyrille Ngonga}, year={2021}, pages={118861–118870} }'
chicago: 'Zahera, H.M.A, Rricha Jalota, Mohamed Ahmed Sherif, and Axel-Cyrille Ngonga
Ngomo. “I-AID: Identifying Actionable Information From Disaster-Related Tweets.”
IEEE Access 9 (2021): 118861–70. https://doi.org/10.1109/access.2021.3107812.'
ieee: 'H. M. A. Zahera, R. Jalota, M. A. Sherif, and A.-C. N. Ngomo, “I-AID: Identifying
Actionable Information From Disaster-Related Tweets,” IEEE Access, vol.
9, pp. 118861–118870, 2021, doi: 10.1109/access.2021.3107812.'
mla: 'Zahera, H. M. A., et al. “I-AID: Identifying Actionable Information From Disaster-Related
Tweets.” IEEE Access, vol. 9, Institute of Electrical and Electronics Engineers
(IEEE), 2021, pp. 118861–70, doi:10.1109/access.2021.3107812.'
short: H.M.A. Zahera, R. Jalota, M.A. Sherif, A.-C.N. Ngomo, IEEE Access 9 (2021)
118861–118870.
date_created: 2022-03-18T10:12:15Z
date_updated: 2023-06-23T09:24:06Z
doi: 10.1109/access.2021.3107812
intvolume: ' 9'
keyword:
- General Engineering
- General Materials Science
- General Computer Science
language:
- iso: eng
page: 118861-118870
publication: IEEE Access
publication_identifier:
issn:
- 2169-3536
publication_status: published
publisher: Institute of Electrical and Electronics Engineers (IEEE)
status: public
title: 'I-AID: Identifying Actionable Information From Disaster-Related Tweets'
type: journal_article
user_id: '72768'
volume: 9
year: '2021'
...
---
_id: '46007'
author:
- first_name: Qingfeng
full_name: Zhai, Qingfeng
last_name: Zhai
- first_name: Ying
full_name: Pan, Ying
id: '100383'
last_name: Pan
- first_name: Liming
full_name: Dai, Liming
last_name: Dai
citation:
ama: 'Zhai Q, Pan Y, Dai L. Carbon-Based Metal-Free Electrocatalysts: Past, Present,
and Future. Accounts of Materials Research. 2021;2(12):1239-1250. doi:10.1021/accountsmr.1c00190'
apa: 'Zhai, Q., Pan, Y., & Dai, L. (2021). Carbon-Based Metal-Free Electrocatalysts:
Past, Present, and Future. Accounts of Materials Research, 2(12),
1239–1250. https://doi.org/10.1021/accountsmr.1c00190'
bibtex: '@article{Zhai_Pan_Dai_2021, title={Carbon-Based Metal-Free Electrocatalysts:
Past, Present, and Future}, volume={2}, DOI={10.1021/accountsmr.1c00190},
number={12}, journal={Accounts of Materials Research}, publisher={American Chemical
Society (ACS)}, author={Zhai, Qingfeng and Pan, Ying and Dai, Liming}, year={2021},
pages={1239–1250} }'
chicago: 'Zhai, Qingfeng, Ying Pan, and Liming Dai. “Carbon-Based Metal-Free Electrocatalysts:
Past, Present, and Future.” Accounts of Materials Research 2, no. 12 (2021):
1239–50. https://doi.org/10.1021/accountsmr.1c00190.'
ieee: 'Q. Zhai, Y. Pan, and L. Dai, “Carbon-Based Metal-Free Electrocatalysts: Past,
Present, and Future,” Accounts of Materials Research, vol. 2, no. 12, pp.
1239–1250, 2021, doi: 10.1021/accountsmr.1c00190.'
mla: 'Zhai, Qingfeng, et al. “Carbon-Based Metal-Free Electrocatalysts: Past, Present,
and Future.” Accounts of Materials Research, vol. 2, no. 12, American Chemical
Society (ACS), 2021, pp. 1239–50, doi:10.1021/accountsmr.1c00190.'
short: Q. Zhai, Y. Pan, L. Dai, Accounts of Materials Research 2 (2021) 1239–1250.
date_created: 2023-07-11T14:49:16Z
date_updated: 2023-07-11T16:38:43Z
doi: 10.1021/accountsmr.1c00190
extern: '1'
intvolume: ' 2'
issue: '12'
keyword:
- Materials Chemistry
- Polymers and Plastics
- Materials Science (miscellaneous)
- Chemical Engineering (miscellaneous)
language:
- iso: eng
page: 1239-1250
publication: Accounts of Materials Research
publication_identifier:
issn:
- 2643-6728
- 2643-6728
publication_status: published
publisher: American Chemical Society (ACS)
status: public
title: 'Carbon-Based Metal-Free Electrocatalysts: Past, Present, and Future'
type: journal_article
user_id: '100383'
volume: 2
year: '2021'
...
---
_id: '46017'
author:
- first_name: Dawei
full_name: Zhang, Dawei
last_name: Zhang
- first_name: Zheng-Dong
full_name: Luo, Zheng-Dong
last_name: Luo
- first_name: Yin
full_name: Yao, Yin
last_name: Yao
- first_name: Peggy
full_name: Schoenherr, Peggy
last_name: Schoenherr
- first_name: Chuhan
full_name: Sha, Chuhan
last_name: Sha
- first_name: Ying
full_name: Pan, Ying
id: '100383'
last_name: Pan
- first_name: Pankaj
full_name: Sharma, Pankaj
last_name: Sharma
- first_name: Marin
full_name: Alexe, Marin
last_name: Alexe
- first_name: Jan
full_name: Seidel, Jan
last_name: Seidel
citation:
ama: Zhang D, Luo Z-D, Yao Y, et al. Anisotropic Ion Migration and Electronic Conduction
in van der Waals Ferroelectric CuInP2S6. Nano Letters. 2021;21(2):995-1002.
doi:10.1021/acs.nanolett.0c04023
apa: Zhang, D., Luo, Z.-D., Yao, Y., Schoenherr, P., Sha, C., Pan, Y., Sharma, P.,
Alexe, M., & Seidel, J. (2021). Anisotropic Ion Migration and Electronic Conduction
in van der Waals Ferroelectric CuInP2S6. Nano Letters, 21(2), 995–1002.
https://doi.org/10.1021/acs.nanolett.0c04023
bibtex: '@article{Zhang_Luo_Yao_Schoenherr_Sha_Pan_Sharma_Alexe_Seidel_2021, title={Anisotropic
Ion Migration and Electronic Conduction in van der Waals Ferroelectric CuInP2S6},
volume={21}, DOI={10.1021/acs.nanolett.0c04023},
number={2}, journal={Nano Letters}, publisher={American Chemical Society (ACS)},
author={Zhang, Dawei and Luo, Zheng-Dong and Yao, Yin and Schoenherr, Peggy and
Sha, Chuhan and Pan, Ying and Sharma, Pankaj and Alexe, Marin and Seidel, Jan},
year={2021}, pages={995–1002} }'
chicago: 'Zhang, Dawei, Zheng-Dong Luo, Yin Yao, Peggy Schoenherr, Chuhan Sha, Ying
Pan, Pankaj Sharma, Marin Alexe, and Jan Seidel. “Anisotropic Ion Migration and
Electronic Conduction in van Der Waals Ferroelectric CuInP2S6.” Nano Letters
21, no. 2 (2021): 995–1002. https://doi.org/10.1021/acs.nanolett.0c04023.'
ieee: 'D. Zhang et al., “Anisotropic Ion Migration and Electronic Conduction
in van der Waals Ferroelectric CuInP2S6,” Nano Letters, vol. 21, no. 2,
pp. 995–1002, 2021, doi: 10.1021/acs.nanolett.0c04023.'
mla: Zhang, Dawei, et al. “Anisotropic Ion Migration and Electronic Conduction in
van Der Waals Ferroelectric CuInP2S6.” Nano Letters, vol. 21, no. 2, American
Chemical Society (ACS), 2021, pp. 995–1002, doi:10.1021/acs.nanolett.0c04023.
short: D. Zhang, Z.-D. Luo, Y. Yao, P. Schoenherr, C. Sha, Y. Pan, P. Sharma, M.
Alexe, J. Seidel, Nano Letters 21 (2021) 995–1002.
date_created: 2023-07-11T16:48:45Z
date_updated: 2023-07-11T16:54:28Z
doi: 10.1021/acs.nanolett.0c04023
extern: '1'
intvolume: ' 21'
issue: '2'
keyword:
- Mechanical Engineering
- Condensed Matter Physics
- General Materials Science
- General Chemistry
- Bioengineering
language:
- iso: eng
page: 995-1002
publication: Nano Letters
publication_identifier:
issn:
- 1530-6984
- 1530-6992
publication_status: published
publisher: American Chemical Society (ACS)
status: public
title: Anisotropic Ion Migration and Electronic Conduction in van der Waals Ferroelectric
CuInP2S6
type: journal_article
user_id: '100383'
volume: 21
year: '2021'
...
---
_id: '51202'
abstract:
- lang: eng
text: When joining lightweight parts of various materials, clinching is
a cost efficient solution. In a production line, the quality of a clinch point
is primarily controlled by measurement of dimensions, which are accessible from
outside. However, methods such as visual testing and measuring the bottom thickness
as well as the outer diameter are not able to deliver any information about the
most significant geometrical characteristic of the clinch point, neck thickness
and undercut. Furthermore, ex-situ destructive methods such as microsectioning
cannot detect elastic deformations and cracks that close after unloading. In order
to exceed the current limits, a new non-destructive in-situ testing method for
the clinching process is necessary. This work proposes a concept to characterize
clinch points in-situ by combining two complementary non-destructive methods,
namely, computed tomography (CT) and ultrasonic testing. Firstly, clinch points
with different geometrical characteristics are analysed experimentally using ex-situ
CT to get a highly spatially resolved 3D-image of the object. In this context,
highly X-ray attenuating materials enhancing the visibility of the sheet-sheet
interface are investigated. Secondly, the test specimens are modelled using finite
element method (FEM) and a transient dynamic analysis (TDA) is conducted to study
the effect of the geometrical differences on the deformation energy and to qualify
the TDA as a fast in-situ non-destructive method for characterizing clinch points
at high temporal resolution.
author:
- first_name: Daniel
full_name: Köhler, Daniel
last_name: Köhler
- first_name: Behdad
full_name: Sadeghian, Behdad
last_name: Sadeghian
- first_name: Robert
full_name: Kupfer, Robert
last_name: Kupfer
- first_name: Juliane
full_name: Troschitz, Juliane
last_name: Troschitz
- first_name: Maik
full_name: Gude, Maik
last_name: Gude
- first_name: Alexander
full_name: Brosius, Alexander
last_name: Brosius
citation:
ama: Köhler D, Sadeghian B, Kupfer R, Troschitz J, Gude M, Brosius A. A Method for
Characterization of Geometric Deviations in Clinch Points with Computed Tomography
and Transient Dynamic Analysis. Key Engineering Materials. 2021;883:89-96.
doi:10.4028/www.scientific.net/kem.883.89
apa: Köhler, D., Sadeghian, B., Kupfer, R., Troschitz, J., Gude, M., & Brosius,
A. (2021). A Method for Characterization of Geometric Deviations in Clinch Points
with Computed Tomography and Transient Dynamic Analysis. Key Engineering Materials,
883, 89–96. https://doi.org/10.4028/www.scientific.net/kem.883.89
bibtex: '@article{Köhler_Sadeghian_Kupfer_Troschitz_Gude_Brosius_2021, title={A
Method for Characterization of Geometric Deviations in Clinch Points with Computed
Tomography and Transient Dynamic Analysis}, volume={883}, DOI={10.4028/www.scientific.net/kem.883.89},
journal={Key Engineering Materials}, publisher={Trans Tech Publications, Ltd.},
author={Köhler, Daniel and Sadeghian, Behdad and Kupfer, Robert and Troschitz,
Juliane and Gude, Maik and Brosius, Alexander}, year={2021}, pages={89–96} }'
chicago: 'Köhler, Daniel, Behdad Sadeghian, Robert Kupfer, Juliane Troschitz, Maik
Gude, and Alexander Brosius. “A Method for Characterization of Geometric Deviations
in Clinch Points with Computed Tomography and Transient Dynamic Analysis.” Key
Engineering Materials 883 (2021): 89–96. https://doi.org/10.4028/www.scientific.net/kem.883.89.'
ieee: 'D. Köhler, B. Sadeghian, R. Kupfer, J. Troschitz, M. Gude, and A. Brosius,
“A Method for Characterization of Geometric Deviations in Clinch Points with Computed
Tomography and Transient Dynamic Analysis,” Key Engineering Materials,
vol. 883, pp. 89–96, 2021, doi: 10.4028/www.scientific.net/kem.883.89.'
mla: Köhler, Daniel, et al. “A Method for Characterization of Geometric Deviations
in Clinch Points with Computed Tomography and Transient Dynamic Analysis.” Key
Engineering Materials, vol. 883, Trans Tech Publications, Ltd., 2021, pp.
89–96, doi:10.4028/www.scientific.net/kem.883.89.
short: D. Köhler, B. Sadeghian, R. Kupfer, J. Troschitz, M. Gude, A. Brosius, Key
Engineering Materials 883 (2021) 89–96.
date_created: 2024-02-06T15:06:14Z
date_updated: 2025-06-02T20:19:57Z
department:
- _id: '157'
- _id: '43'
doi: 10.4028/www.scientific.net/kem.883.89
intvolume: ' 883'
keyword:
- Mechanical Engineering
- Mechanics of Materials
- General Materials Science
language:
- iso: eng
page: 89-96
project:
- _id: '130'
grant_number: '418701707'
name: 'TRR 285: TRR 285'
- _id: '133'
name: 'TRR 285 - C: TRR 285 - Project Area C'
- _id: '148'
name: 'TRR 285 – C04: TRR 285 - Subproject C04'
publication: Key Engineering Materials
publication_identifier:
issn:
- 1662-9795
publication_status: published
publisher: Trans Tech Publications, Ltd.
status: public
title: A Method for Characterization of Geometric Deviations in Clinch Points with
Computed Tomography and Transient Dynamic Analysis
type: journal_article
user_id: '83408'
volume: 883
year: '2021'
...
---
_id: '51200'
abstract:
- lang: eng
text: As lightweight design gains more and more attention, time and cost-efficient
joining methods such as clinching are becoming more popular. A clinch point’s
quality is usually determined by ex situ destructive analyses such as microsectioning.
However, these methods do not yield the detection of phenomena occurring during
loading such as elastic deformations and cracks that close after unloading. Alternatively,
in situ computed tomography (in situ CT) can be used to investigate the loading
process of clinch points. In this paper, a method for in situ CT analysis of a
single-lap shear test with clinched metal sheets is presented at the example of
a clinched joint with two 2 mm thick aluminum sheets. Furthermore, the potential
of this method to validate numerical simulations is shown. Since the sheets’ surfaces
are locally in contact with each other, the interface between both aluminum sheets
and therefore the exact contour of the joining partners is difficult to identify
in CT analyses. To compensate for this, the application of copper varnish between
the sheets is investigated. The best in situ CT results are achieved with both
sheets treated. It showed that with this treatment, in situ CT is suitable to
properly observe the three-dimensional deformation behavior and to identify the
failure modes.
article_number: '1859'
author:
- first_name: Daniel
full_name: Köhler, Daniel
last_name: Köhler
- first_name: Robert
full_name: Kupfer, Robert
last_name: Kupfer
- first_name: Juliane
full_name: Troschitz, Juliane
last_name: Troschitz
- first_name: Maik
full_name: Gude, Maik
last_name: Gude
citation:
ama: Köhler D, Kupfer R, Troschitz J, Gude M. In Situ Computed Tomography—Analysis
of a Single-Lap Shear Test with Clinch Points. Materials. 2021;14(8). doi:10.3390/ma14081859
apa: Köhler, D., Kupfer, R., Troschitz, J., & Gude, M. (2021). In Situ Computed
Tomography—Analysis of a Single-Lap Shear Test with Clinch Points. Materials,
14(8), Article 1859. https://doi.org/10.3390/ma14081859
bibtex: '@article{Köhler_Kupfer_Troschitz_Gude_2021, title={In Situ Computed Tomography—Analysis
of a Single-Lap Shear Test with Clinch Points}, volume={14}, DOI={10.3390/ma14081859},
number={81859}, journal={Materials}, publisher={MDPI AG}, author={Köhler, Daniel
and Kupfer, Robert and Troschitz, Juliane and Gude, Maik}, year={2021} }'
chicago: Köhler, Daniel, Robert Kupfer, Juliane Troschitz, and Maik Gude. “In Situ
Computed Tomography—Analysis of a Single-Lap Shear Test with Clinch Points.” Materials
14, no. 8 (2021). https://doi.org/10.3390/ma14081859.
ieee: 'D. Köhler, R. Kupfer, J. Troschitz, and M. Gude, “In Situ Computed Tomography—Analysis
of a Single-Lap Shear Test with Clinch Points,” Materials, vol. 14, no.
8, Art. no. 1859, 2021, doi: 10.3390/ma14081859.'
mla: Köhler, Daniel, et al. “In Situ Computed Tomography—Analysis of a Single-Lap
Shear Test with Clinch Points.” Materials, vol. 14, no. 8, 1859, MDPI AG,
2021, doi:10.3390/ma14081859.
short: D. Köhler, R. Kupfer, J. Troschitz, M. Gude, Materials 14 (2021).
date_created: 2024-02-06T15:05:43Z
date_updated: 2025-06-02T20:20:32Z
department:
- _id: '157'
- _id: '43'
doi: 10.3390/ma14081859
intvolume: ' 14'
issue: '8'
keyword:
- General Materials Science
language:
- iso: eng
project:
- _id: '130'
grant_number: '418701707'
name: 'TRR 285: TRR 285'
- _id: '133'
name: 'TRR 285 - C: TRR 285 - Project Area C'
- _id: '148'
name: 'TRR 285 – C04: TRR 285 - Subproject C04'
publication: Materials
publication_identifier:
issn:
- 1996-1944
publication_status: published
publisher: MDPI AG
status: public
title: In Situ Computed Tomography—Analysis of a Single-Lap Shear Test with Clinch
Points
type: journal_article
user_id: '83408'
volume: 14
year: '2021'
...
---
_id: '41508'
article_number: '142312'
author:
- first_name: Alan Adam
full_name: Camberg, Alan Adam
id: '60544'
last_name: Camberg
- first_name: Anatolii
full_name: Andreiev, Anatolii
id: '50215'
last_name: Andreiev
- first_name: Sudipta
full_name: Pramanik, Sudipta
last_name: Pramanik
- first_name: Kay-Peter
full_name: Hoyer, Kay-Peter
id: '48411'
last_name: Hoyer
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
citation:
ama: 'Camberg AA, Andreiev A, Pramanik S, Hoyer K-P, Tröster T, Schaper M. Strength
enhancement of AlMg sheet metal parts by rapid heating and subsequent cold die
stamping of severely cold-rolled blanks. Materials Science and Engineering:
A. 2021;831. doi:10.1016/j.msea.2021.142312'
apa: 'Camberg, A. A., Andreiev, A., Pramanik, S., Hoyer, K.-P., Tröster, T., &
Schaper, M. (2021). Strength enhancement of AlMg sheet metal parts by rapid heating
and subsequent cold die stamping of severely cold-rolled blanks. Materials
Science and Engineering: A, 831, Article 142312. https://doi.org/10.1016/j.msea.2021.142312'
bibtex: '@article{Camberg_Andreiev_Pramanik_Hoyer_Tröster_Schaper_2021, title={Strength
enhancement of AlMg sheet metal parts by rapid heating and subsequent cold die
stamping of severely cold-rolled blanks}, volume={831}, DOI={10.1016/j.msea.2021.142312},
number={142312}, journal={Materials Science and Engineering: A}, publisher={Elsevier
BV}, author={Camberg, Alan Adam and Andreiev, Anatolii and Pramanik, Sudipta and
Hoyer, Kay-Peter and Tröster, Thomas and Schaper, Mirko}, year={2021} }'
chicago: 'Camberg, Alan Adam, Anatolii Andreiev, Sudipta Pramanik, Kay-Peter Hoyer,
Thomas Tröster, and Mirko Schaper. “Strength Enhancement of AlMg Sheet Metal Parts
by Rapid Heating and Subsequent Cold Die Stamping of Severely Cold-Rolled Blanks.”
Materials Science and Engineering: A 831 (2021). https://doi.org/10.1016/j.msea.2021.142312.'
ieee: 'A. A. Camberg, A. Andreiev, S. Pramanik, K.-P. Hoyer, T. Tröster, and M.
Schaper, “Strength enhancement of AlMg sheet metal parts by rapid heating and
subsequent cold die stamping of severely cold-rolled blanks,” Materials Science
and Engineering: A, vol. 831, Art. no. 142312, 2021, doi: 10.1016/j.msea.2021.142312.'
mla: 'Camberg, Alan Adam, et al. “Strength Enhancement of AlMg Sheet Metal Parts
by Rapid Heating and Subsequent Cold Die Stamping of Severely Cold-Rolled Blanks.”
Materials Science and Engineering: A, vol. 831, 142312, Elsevier BV, 2021,
doi:10.1016/j.msea.2021.142312.'
short: 'A.A. Camberg, A. Andreiev, S. Pramanik, K.-P. Hoyer, T. Tröster, M. Schaper,
Materials Science and Engineering: A 831 (2021).'
date_created: 2023-02-02T14:31:53Z
date_updated: 2025-06-06T08:07:18Z
department:
- _id: '9'
- _id: '158'
- _id: '149'
- _id: '321'
doi: 10.1016/j.msea.2021.142312
intvolume: ' 831'
keyword:
- Mechanical Engineering
- Mechanics of Materials
- Condensed Matter Physics
- General Materials Science
language:
- iso: eng
publication: 'Materials Science and Engineering: A'
publication_identifier:
issn:
- 0921-5093
publication_status: published
publisher: Elsevier BV
status: public
title: Strength enhancement of AlMg sheet metal parts by rapid heating and subsequent
cold die stamping of severely cold-rolled blanks
type: journal_article
user_id: '15952'
volume: 831
year: '2021'
...
---
_id: '29747'
author:
- first_name: Hans
full_name: Jurgen von Bardeleben, Hans
last_name: Jurgen von Bardeleben
- first_name: Jean-Louis
full_name: Cantin, Jean-Louis
last_name: Cantin
- first_name: Uwe
full_name: Gerstmann, Uwe
id: '171'
last_name: Gerstmann
orcid: 0000-0002-4476-223X
- first_name: Wolf Gero
full_name: Schmidt, Wolf Gero
id: '468'
last_name: Schmidt
orcid: 0000-0002-2717-5076
- first_name: Timur
full_name: Biktagirov, Timur
id: '65612'
last_name: Biktagirov
citation:
ama: Jurgen von Bardeleben H, Cantin J-L, Gerstmann U, Schmidt WG, Biktagirov T.
Spin Polarization, Electron–Phonon Coupling, and Zero-Phonon Line of the NV Center
in 3C-SiC. Nano Letters. 2021;21(19):8119-8125. doi:10.1021/acs.nanolett.1c02564
apa: Jurgen von Bardeleben, H., Cantin, J.-L., Gerstmann, U., Schmidt, W. G., &
Biktagirov, T. (2021). Spin Polarization, Electron–Phonon Coupling, and Zero-Phonon
Line of the NV Center in 3C-SiC. Nano Letters, 21(19), 8119–8125.
https://doi.org/10.1021/acs.nanolett.1c02564
bibtex: '@article{Jurgen von Bardeleben_Cantin_Gerstmann_Schmidt_Biktagirov_2021,
title={Spin Polarization, Electron–Phonon Coupling, and Zero-Phonon Line of the
NV Center in 3C-SiC}, volume={21}, DOI={10.1021/acs.nanolett.1c02564},
number={19}, journal={Nano Letters}, publisher={American Chemical Society (ACS)},
author={Jurgen von Bardeleben, Hans and Cantin, Jean-Louis and Gerstmann, Uwe
and Schmidt, Wolf Gero and Biktagirov, Timur}, year={2021}, pages={8119–8125}
}'
chicago: 'Jurgen von Bardeleben, Hans, Jean-Louis Cantin, Uwe Gerstmann, Wolf Gero
Schmidt, and Timur Biktagirov. “Spin Polarization, Electron–Phonon Coupling, and
Zero-Phonon Line of the NV Center in 3C-SiC.” Nano Letters 21, no. 19 (2021):
8119–25. https://doi.org/10.1021/acs.nanolett.1c02564.'
ieee: 'H. Jurgen von Bardeleben, J.-L. Cantin, U. Gerstmann, W. G. Schmidt, and
T. Biktagirov, “Spin Polarization, Electron–Phonon Coupling, and Zero-Phonon Line
of the NV Center in 3C-SiC,” Nano Letters, vol. 21, no. 19, pp. 8119–8125,
2021, doi: 10.1021/acs.nanolett.1c02564.'
mla: Jurgen von Bardeleben, Hans, et al. “Spin Polarization, Electron–Phonon Coupling,
and Zero-Phonon Line of the NV Center in 3C-SiC.” Nano Letters, vol. 21,
no. 19, American Chemical Society (ACS), 2021, pp. 8119–25, doi:10.1021/acs.nanolett.1c02564.
short: H. Jurgen von Bardeleben, J.-L. Cantin, U. Gerstmann, W.G. Schmidt, T. Biktagirov,
Nano Letters 21 (2021) 8119–8125.
date_created: 2022-02-03T15:33:41Z
date_updated: 2025-12-05T14:03:24Z
department:
- _id: '15'
- _id: '170'
- _id: '295'
- _id: '230'
- _id: '429'
- _id: '35'
- _id: '790'
- _id: '27'
doi: 10.1021/acs.nanolett.1c02564
intvolume: ' 21'
issue: '19'
keyword:
- Mechanical Engineering
- Condensed Matter Physics
- General Materials Science
- General Chemistry
- Bioengineering
language:
- iso: eng
page: 8119-8125
project:
- _id: '53'
name: 'TRR 142: TRR 142'
- _id: '55'
name: 'TRR 142 - B: TRR 142 - Project Area B'
- _id: '69'
name: 'TRR 142 - B4: TRR 142 - Subproject B4'
- _id: '52'
name: 'PC2: Computing Resources Provided by the Paderborn Center for Parallel Computing'
- _id: '53'
name: 'TRR 142: Maßgeschneiderte nichtlineare Photonik: Von grundlegenden Konzepten
zu funktionellen Strukturen'
publication: Nano Letters
publication_identifier:
issn:
- 1530-6984
- 1530-6992
publication_status: published
publisher: American Chemical Society (ACS)
status: public
title: Spin Polarization, Electron–Phonon Coupling, and Zero-Phonon Line of the NV
Center in 3C-SiC
type: journal_article
user_id: '16199'
volume: 21
year: '2021'
...
---
_id: '40571'
article_number: '862'
author:
- first_name: Janina
full_name: Kossmann, Janina
last_name: Kossmann
- first_name: Diana
full_name: Piankova, Diana
last_name: Piankova
- first_name: Nadezda V.
full_name: Tarakina, Nadezda V.
last_name: Tarakina
- first_name: Julian
full_name: Heske, Julian
last_name: Heske
- first_name: Thomas D.
full_name: Kühne, Thomas D.
last_name: Kühne
- first_name: Johannes
full_name: Schmidt, Johannes
last_name: Schmidt
- first_name: Markus
full_name: Antonietti, Markus
last_name: Antonietti
- first_name: Nieves
full_name: Lopez Salas, Nieves
id: '98120'
last_name: Lopez Salas
orcid: https://orcid.org/0000-0002-8438-9548
citation:
ama: Kossmann J, Piankova D, Tarakina NV, et al. Corrigendum to ‘Guanine condensates
as covalent materials and the concept of cryptopores’ [Carbon 172 (2021) 497–505].
Carbon. 2021;182. doi:10.1016/j.carbon.2021.06.084
apa: Kossmann, J., Piankova, D., Tarakina, N. V., Heske, J., Kühne, T. D., Schmidt,
J., Antonietti, M., & Lopez Salas, N. (2021). Corrigendum to ‘Guanine condensates
as covalent materials and the concept of cryptopores’ [Carbon 172 (2021) 497–505].
Carbon, 182, Article 862. https://doi.org/10.1016/j.carbon.2021.06.084
bibtex: '@article{Kossmann_Piankova_Tarakina_Heske_Kühne_Schmidt_Antonietti_Lopez
Salas_2021, title={Corrigendum to ‘Guanine condensates as covalent materials and
the concept of cryptopores’ [Carbon 172 (2021) 497–505]}, volume={182}, DOI={10.1016/j.carbon.2021.06.084},
number={862}, journal={Carbon}, publisher={Elsevier BV}, author={Kossmann, Janina
and Piankova, Diana and Tarakina, Nadezda V. and Heske, Julian and Kühne, Thomas
D. and Schmidt, Johannes and Antonietti, Markus and Lopez Salas, Nieves}, year={2021}
}'
chicago: Kossmann, Janina, Diana Piankova, Nadezda V. Tarakina, Julian Heske, Thomas
D. Kühne, Johannes Schmidt, Markus Antonietti, and Nieves Lopez Salas. “Corrigendum
to ‘Guanine Condensates as Covalent Materials and the Concept of Cryptopores’
[Carbon 172 (2021) 497–505].” Carbon 182 (2021). https://doi.org/10.1016/j.carbon.2021.06.084.
ieee: 'J. Kossmann et al., “Corrigendum to ‘Guanine condensates as covalent
materials and the concept of cryptopores’ [Carbon 172 (2021) 497–505],” Carbon,
vol. 182, Art. no. 862, 2021, doi: 10.1016/j.carbon.2021.06.084.'
mla: Kossmann, Janina, et al. “Corrigendum to ‘Guanine Condensates as Covalent Materials
and the Concept of Cryptopores’ [Carbon 172 (2021) 497–505].” Carbon, vol.
182, 862, Elsevier BV, 2021, doi:10.1016/j.carbon.2021.06.084.
short: J. Kossmann, D. Piankova, N.V. Tarakina, J. Heske, T.D. Kühne, J. Schmidt,
M. Antonietti, N. Lopez Salas, Carbon 182 (2021).
date_created: 2023-01-27T16:20:33Z
date_updated: 2026-01-08T12:57:26Z
doi: 10.1016/j.carbon.2021.06.084
intvolume: ' 182'
keyword:
- General Chemistry
- General Materials Science
language:
- iso: eng
publication: Carbon
publication_identifier:
issn:
- 0008-6223
publication_status: published
publisher: Elsevier BV
status: public
title: Corrigendum to ‘Guanine condensates as covalent materials and the concept of
cryptopores’ [Carbon 172 (2021) 497–505]
type: journal_article
user_id: '98120'
volume: 182
year: '2021'
...
---
_id: '33647'
author:
- first_name: Janina
full_name: Kossmann, Janina
last_name: Kossmann
- first_name: Diana
full_name: Piankova, Diana
last_name: Piankova
- first_name: Nadezda V.
full_name: Tarakina, Nadezda V.
last_name: Tarakina
- first_name: Julian Joachim
full_name: Heske, Julian Joachim
id: '53238'
last_name: Heske
- first_name: Thomas
full_name: Kühne, Thomas
id: '49079'
last_name: Kühne
- first_name: Johannes
full_name: Schmidt, Johannes
last_name: Schmidt
- first_name: Markus
full_name: Antonietti, Markus
last_name: Antonietti
- first_name: Nieves
full_name: López-Salas, Nieves
last_name: López-Salas
citation:
ama: Kossmann J, Piankova D, Tarakina NV, et al. Guanine condensates as covalent
materials and the concept of cryptopores. Carbon. 2020;172:497-505. doi:10.1016/j.carbon.2020.10.047
apa: Kossmann, J., Piankova, D., Tarakina, N. V., Heske, J. J., Kühne, T., Schmidt,
J., Antonietti, M., & López-Salas, N. (2020). Guanine condensates as covalent
materials and the concept of cryptopores. Carbon, 172, 497–505.
https://doi.org/10.1016/j.carbon.2020.10.047
bibtex: '@article{Kossmann_Piankova_Tarakina_Heske_Kühne_Schmidt_Antonietti_López-Salas_2020,
title={Guanine condensates as covalent materials and the concept of cryptopores},
volume={172}, DOI={10.1016/j.carbon.2020.10.047},
journal={Carbon}, publisher={Elsevier BV}, author={Kossmann, Janina and Piankova,
Diana and Tarakina, Nadezda V. and Heske, Julian Joachim and Kühne, Thomas and
Schmidt, Johannes and Antonietti, Markus and López-Salas, Nieves}, year={2020},
pages={497–505} }'
chicago: 'Kossmann, Janina, Diana Piankova, Nadezda V. Tarakina, Julian Joachim
Heske, Thomas Kühne, Johannes Schmidt, Markus Antonietti, and Nieves López-Salas.
“Guanine Condensates as Covalent Materials and the Concept of Cryptopores.” Carbon
172 (2020): 497–505. https://doi.org/10.1016/j.carbon.2020.10.047.'
ieee: 'J. Kossmann et al., “Guanine condensates as covalent materials and
the concept of cryptopores,” Carbon, vol. 172, pp. 497–505, 2020, doi:
10.1016/j.carbon.2020.10.047.'
mla: Kossmann, Janina, et al. “Guanine Condensates as Covalent Materials and the
Concept of Cryptopores.” Carbon, vol. 172, Elsevier BV, 2020, pp. 497–505,
doi:10.1016/j.carbon.2020.10.047.
short: J. Kossmann, D. Piankova, N.V. Tarakina, J.J. Heske, T. Kühne, J. Schmidt,
M. Antonietti, N. López-Salas, Carbon 172 (2020) 497–505.
date_created: 2022-10-10T08:13:31Z
date_updated: 2022-10-10T08:13:47Z
department:
- _id: '613'
doi: 10.1016/j.carbon.2020.10.047
intvolume: ' 172'
keyword:
- General Chemistry
- General Materials Science
language:
- iso: eng
page: 497-505
publication: Carbon
publication_identifier:
issn:
- 0008-6223
publication_status: published
publisher: Elsevier BV
status: public
title: Guanine condensates as covalent materials and the concept of cryptopores
type: journal_article
user_id: '71051'
volume: 172
year: '2020'
...
---
_id: '34092'
abstract:
- lang: eng
text: Block copolymer (BCP) self-assembly is a promising tool for next generation
lithography as microphase separated polymer domains in thin films can act as templates
for surface nanopatterning with sub-20 nm features. The replicated patterns can,
however, only be as precise as their templates. Thus, the investigation of the
morphology of polymer domains is of great importance. Commonly used analytical
techniques (neutron scattering, scanning force microscopy) either lack spatial
information or nanoscale resolution. Using advanced analytical (scanning) transmission
electron microscopy ((S)TEM), we provide real space information on polymer domain
morphology and interfaces between polystyrene (PS) and polymethylmethacrylate
(PMMA) in cylinder- and lamellae-forming BCPs at highest resolution. This allows
us to correlate the internal structure of polymer domains with line edge roughnesses,
interface widths and domain sizes. STEM is employed for high-resolution imaging,
electron energy loss spectroscopy and energy filtered TEM (EFTEM) spectroscopic
imaging for material identification and EFTEM thickness mapping for visualisation
of material densities at defects. The volume fraction of non-phase separated polymer
species can be analysed by EFTEM. These methods give new insights into the morphology
of polymer domains the exact knowledge of which will allow to improve pattern
quality for nanolithography.
article_number: '141'
author:
- first_name: Julius
full_name: Bürger, Julius
id: '46952'
last_name: Bürger
- first_name: Vinay
full_name: Kunnathully, Vinay
last_name: Kunnathully
- first_name: Daniel
full_name: Kool, Daniel
id: '44586'
last_name: Kool
- first_name: Jörg
full_name: Lindner, Jörg
id: '20797'
last_name: Lindner
- first_name: Katharina
full_name: Brassat, Katharina
id: '11305'
last_name: Brassat
citation:
ama: Bürger J, Kunnathully V, Kool D, Lindner J, Brassat K. Characterisation of
the PS-PMMA Interfaces in Microphase Separated Block Copolymer Thin Films by Analytical
(S)TEM. Nanomaterials. 2020;10(1). doi:10.3390/nano10010141
apa: Bürger, J., Kunnathully, V., Kool, D., Lindner, J., & Brassat, K. (2020).
Characterisation of the PS-PMMA Interfaces in Microphase Separated Block Copolymer
Thin Films by Analytical (S)TEM. Nanomaterials, 10(1), Article 141.
https://doi.org/10.3390/nano10010141
bibtex: '@article{Bürger_Kunnathully_Kool_Lindner_Brassat_2020, title={Characterisation
of the PS-PMMA Interfaces in Microphase Separated Block Copolymer Thin Films by
Analytical (S)TEM}, volume={10}, DOI={10.3390/nano10010141},
number={1141}, journal={Nanomaterials}, publisher={MDPI AG}, author={Bürger, Julius
and Kunnathully, Vinay and Kool, Daniel and Lindner, Jörg and Brassat, Katharina},
year={2020} }'
chicago: Bürger, Julius, Vinay Kunnathully, Daniel Kool, Jörg Lindner, and Katharina
Brassat. “Characterisation of the PS-PMMA Interfaces in Microphase Separated Block
Copolymer Thin Films by Analytical (S)TEM.” Nanomaterials 10, no. 1 (2020).
https://doi.org/10.3390/nano10010141.
ieee: 'J. Bürger, V. Kunnathully, D. Kool, J. Lindner, and K. Brassat, “Characterisation
of the PS-PMMA Interfaces in Microphase Separated Block Copolymer Thin Films by
Analytical (S)TEM,” Nanomaterials, vol. 10, no. 1, Art. no. 141, 2020,
doi: 10.3390/nano10010141.'
mla: Bürger, Julius, et al. “Characterisation of the PS-PMMA Interfaces in Microphase
Separated Block Copolymer Thin Films by Analytical (S)TEM.” Nanomaterials,
vol. 10, no. 1, 141, MDPI AG, 2020, doi:10.3390/nano10010141.
short: J. Bürger, V. Kunnathully, D. Kool, J. Lindner, K. Brassat, Nanomaterials
10 (2020).
date_created: 2022-11-15T14:20:33Z
date_updated: 2023-01-10T12:11:57Z
department:
- _id: '15'
- _id: '230'
doi: 10.3390/nano10010141
intvolume: ' 10'
issue: '1'
keyword:
- General Materials Science
- General Chemical Engineering
language:
- iso: eng
publication: Nanomaterials
publication_identifier:
issn:
- 2079-4991
publication_status: published
publisher: MDPI AG
status: public
title: Characterisation of the PS-PMMA Interfaces in Microphase Separated Block Copolymer
Thin Films by Analytical (S)TEM
type: journal_article
user_id: '77496'
volume: 10
year: '2020'
...
---
_id: '34093'
article_number: '014602'
author:
- first_name: Thomas
full_name: Riedl, Thomas
id: '36950'
last_name: Riedl
- first_name: V. S.
full_name: Kunnathully, V. S.
last_name: Kunnathully
- first_name: A.
full_name: Trapp, A.
last_name: Trapp
- first_name: T.
full_name: Langer, T.
last_name: Langer
- first_name: Dirk
full_name: Reuter, Dirk
id: '37763'
last_name: Reuter
- first_name: Jörg
full_name: Lindner, Jörg
id: '20797'
last_name: Lindner
citation:
ama: Riedl T, Kunnathully VS, Trapp A, Langer T, Reuter D, Lindner J. Strain-driven
InAs island growth on top of GaAs(111) nanopillars. Physical Review Materials.
2020;4(1). doi:10.1103/physrevmaterials.4.014602
apa: Riedl, T., Kunnathully, V. S., Trapp, A., Langer, T., Reuter, D., & Lindner,
J. (2020). Strain-driven InAs island growth on top of GaAs(111) nanopillars. Physical
Review Materials, 4(1), Article 014602. https://doi.org/10.1103/physrevmaterials.4.014602
bibtex: '@article{Riedl_Kunnathully_Trapp_Langer_Reuter_Lindner_2020, title={Strain-driven
InAs island growth on top of GaAs(111) nanopillars}, volume={4}, DOI={10.1103/physrevmaterials.4.014602},
number={1014602}, journal={Physical Review Materials}, publisher={American Physical
Society (APS)}, author={Riedl, Thomas and Kunnathully, V. S. and Trapp, A. and
Langer, T. and Reuter, Dirk and Lindner, Jörg}, year={2020} }'
chicago: Riedl, Thomas, V. S. Kunnathully, A. Trapp, T. Langer, Dirk Reuter, and
Jörg Lindner. “Strain-Driven InAs Island Growth on Top of GaAs(111) Nanopillars.”
Physical Review Materials 4, no. 1 (2020). https://doi.org/10.1103/physrevmaterials.4.014602.
ieee: 'T. Riedl, V. S. Kunnathully, A. Trapp, T. Langer, D. Reuter, and J. Lindner,
“Strain-driven InAs island growth on top of GaAs(111) nanopillars,” Physical
Review Materials, vol. 4, no. 1, Art. no. 014602, 2020, doi: 10.1103/physrevmaterials.4.014602.'
mla: Riedl, Thomas, et al. “Strain-Driven InAs Island Growth on Top of GaAs(111)
Nanopillars.” Physical Review Materials, vol. 4, no. 1, 014602, American
Physical Society (APS), 2020, doi:10.1103/physrevmaterials.4.014602.
short: T. Riedl, V.S. Kunnathully, A. Trapp, T. Langer, D. Reuter, J. Lindner, Physical
Review Materials 4 (2020).
date_created: 2022-11-15T14:21:41Z
date_updated: 2023-01-10T12:12:13Z
department:
- _id: '15'
- _id: '230'
doi: 10.1103/physrevmaterials.4.014602
intvolume: ' 4'
issue: '1'
keyword:
- Physics and Astronomy (miscellaneous)
- General Materials Science
language:
- iso: eng
publication: Physical Review Materials
publication_identifier:
issn:
- 2475-9953
publication_status: published
publisher: American Physical Society (APS)
status: public
title: Strain-driven InAs island growth on top of GaAs(111) nanopillars
type: journal_article
user_id: '77496'
volume: 4
year: '2020'
...
---
_id: '47956'
abstract:
- lang: eng
text: Optically nonlinear Pb2B5O9X (X = Cl, Br) borate halides are an important
group of materials for second harmonic generation (SHG). Additionally, they also
possess excellent photocatalytic activity and stability in the process of dechlorination
of chlorophenols, which are typical persistent organic pollutants. It would be
of great interest to conduct in situ (photo‐) catalysis investigations during
the whole photocatalytic process by SHG when considering them as photocatalytic
materials. In order to get superior photocatalytic efficiency and maximum surface
information, small particles are highly desired. Here, a low‐cost and fast synthesis
route that allows growing microcrystalline optically nonlinear Pb2B5O9X
borate halides at large quantities is introduced. When applying the ionothermal
growth process at temperatures between 130 and 170 °C, microcrystallites with
an average size of about 1 µm precipitate with an orthorhombic hilgardite‐like
borate halide structure. Thorough examinations using powder X‐ray diffraction
and scanning electron microscopy, the Pb2B5O9X microcrystals are indicated to
be chemically pure and single‐phased. Besides, the Pb2B5O9X borate halides' SHG
efficiencies are confirmed using confocal SHG microscopy. The low‐temperature
synthesis route thus makes these borate halides a highly desirable material for
surface studies such as monitoring chemical reactions with picosecond time resolution
and in situ (photo‐) catalysis investigations.
article_number: '2000857'
article_type: original
author:
- first_name: Deming
full_name: Tan, Deming
last_name: Tan
- first_name: Benjamin
full_name: Kirbus, Benjamin
last_name: Kirbus
- first_name: Michael
full_name: Rüsing, Michael
id: '22501'
last_name: Rüsing
orcid: 0000-0003-4682-4577
- first_name: Tobias
full_name: Pietsch, Tobias
last_name: Pietsch
- first_name: Michael
full_name: Ruck, Michael
last_name: Ruck
- first_name: Lukas M.
full_name: Eng, Lukas M.
last_name: Eng
citation:
ama: Tan D, Kirbus B, Rüsing M, Pietsch T, Ruck M, Eng LM. Resource‐Efficient Low‐Temperature
Synthesis of Microcrystalline Pb2B5O9X (X = Cl, Br) for Surfaces Studies by Optical
Second Harmonic Generation. Small. 2020;16(23). doi:10.1002/smll.202000857
apa: Tan, D., Kirbus, B., Rüsing, M., Pietsch, T., Ruck, M., & Eng, L. M. (2020).
Resource‐Efficient Low‐Temperature Synthesis of Microcrystalline Pb2B5O9X (X =
Cl, Br) for Surfaces Studies by Optical Second Harmonic Generation. Small,
16(23), Article 2000857. https://doi.org/10.1002/smll.202000857
bibtex: '@article{Tan_Kirbus_Rüsing_Pietsch_Ruck_Eng_2020, title={Resource‐Efficient
Low‐Temperature Synthesis of Microcrystalline Pb2B5O9X (X = Cl, Br) for Surfaces
Studies by Optical Second Harmonic Generation}, volume={16}, DOI={10.1002/smll.202000857},
number={232000857}, journal={Small}, publisher={Wiley}, author={Tan, Deming and
Kirbus, Benjamin and Rüsing, Michael and Pietsch, Tobias and Ruck, Michael and
Eng, Lukas M.}, year={2020} }'
chicago: Tan, Deming, Benjamin Kirbus, Michael Rüsing, Tobias Pietsch, Michael Ruck,
and Lukas M. Eng. “Resource‐Efficient Low‐Temperature Synthesis of Microcrystalline
Pb2B5O9X (X = Cl, Br) for Surfaces Studies by Optical Second Harmonic Generation.”
Small 16, no. 23 (2020). https://doi.org/10.1002/smll.202000857.
ieee: 'D. Tan, B. Kirbus, M. Rüsing, T. Pietsch, M. Ruck, and L. M. Eng, “Resource‐Efficient
Low‐Temperature Synthesis of Microcrystalline Pb2B5O9X (X = Cl, Br) for Surfaces
Studies by Optical Second Harmonic Generation,” Small, vol. 16, no. 23,
Art. no. 2000857, 2020, doi: 10.1002/smll.202000857.'
mla: Tan, Deming, et al. “Resource‐Efficient Low‐Temperature Synthesis of Microcrystalline
Pb2B5O9X (X = Cl, Br) for Surfaces Studies by Optical Second Harmonic Generation.”
Small, vol. 16, no. 23, 2000857, Wiley, 2020, doi:10.1002/smll.202000857.
short: D. Tan, B. Kirbus, M. Rüsing, T. Pietsch, M. Ruck, L.M. Eng, Small 16 (2020).
date_created: 2023-10-11T08:07:50Z
date_updated: 2023-10-11T08:09:29Z
doi: 10.1002/smll.202000857
intvolume: ' 16'
issue: '23'
keyword:
- Biomaterials
- Biotechnology
- General Materials Science
- General Chemistry
language:
- iso: eng
publication: Small
publication_identifier:
issn:
- 1613-6810
- 1613-6829
publication_status: published
publisher: Wiley
quality_controlled: '1'
status: public
title: Resource‐Efficient Low‐Temperature Synthesis of Microcrystalline Pb2B5O9X (X
= Cl, Br) for Surfaces Studies by Optical Second Harmonic Generation
type: journal_article
user_id: '22501'
volume: 16
year: '2020'
...
---
_id: '35859'
author:
- first_name: Anna Margareta
full_name: Risse, Anna Margareta
last_name: Risse
- first_name: Jürgen
full_name: Schmidtke, Jürgen
last_name: Schmidtke
- first_name: Heinz-Siegfried
full_name: Kitzerow, Heinz-Siegfried
id: '254'
last_name: Kitzerow
citation:
ama: Risse AM, Schmidtke J, Kitzerow H-S. Dynamics of a liquid crystal-based modulator
with germanium substrates for mid-infrared radiation. Liquid Crystals.
2020;48(7):1025-1033. doi:10.1080/02678292.2020.1839803
apa: Risse, A. M., Schmidtke, J., & Kitzerow, H.-S. (2020). Dynamics of a liquid
crystal-based modulator with germanium substrates for mid-infrared radiation.
Liquid Crystals, 48(7), 1025–1033. https://doi.org/10.1080/02678292.2020.1839803
bibtex: '@article{Risse_Schmidtke_Kitzerow_2020, title={Dynamics of a liquid crystal-based
modulator with germanium substrates for mid-infrared radiation}, volume={48},
DOI={10.1080/02678292.2020.1839803},
number={7}, journal={Liquid Crystals}, publisher={Informa UK Limited}, author={Risse,
Anna Margareta and Schmidtke, Jürgen and Kitzerow, Heinz-Siegfried}, year={2020},
pages={1025–1033} }'
chicago: 'Risse, Anna Margareta, Jürgen Schmidtke, and Heinz-Siegfried Kitzerow.
“Dynamics of a Liquid Crystal-Based Modulator with Germanium Substrates for Mid-Infrared
Radiation.” Liquid Crystals 48, no. 7 (2020): 1025–33. https://doi.org/10.1080/02678292.2020.1839803.'
ieee: 'A. M. Risse, J. Schmidtke, and H.-S. Kitzerow, “Dynamics of a liquid crystal-based
modulator with germanium substrates for mid-infrared radiation,” Liquid Crystals,
vol. 48, no. 7, pp. 1025–1033, 2020, doi: 10.1080/02678292.2020.1839803.'
mla: Risse, Anna Margareta, et al. “Dynamics of a Liquid Crystal-Based Modulator
with Germanium Substrates for Mid-Infrared Radiation.” Liquid Crystals,
vol. 48, no. 7, Informa UK Limited, 2020, pp. 1025–33, doi:10.1080/02678292.2020.1839803.
short: A.M. Risse, J. Schmidtke, H.-S. Kitzerow, Liquid Crystals 48 (2020) 1025–1033.
date_created: 2023-01-10T13:48:25Z
date_updated: 2023-01-24T16:54:47Z
department:
- _id: '313'
doi: 10.1080/02678292.2020.1839803
intvolume: ' 48'
issue: '7'
keyword:
- Condensed Matter Physics
- General Materials Science
- General Chemistry
language:
- iso: eng
page: 1025-1033
publication: Liquid Crystals
publication_identifier:
issn:
- 0267-8292
- 1366-5855
publication_status: published
publisher: Informa UK Limited
status: public
title: Dynamics of a liquid crystal-based modulator with germanium substrates for
mid-infrared radiation
type: journal_article
user_id: '254'
volume: 48
year: '2020'
...
---
_id: '35868'
abstract:
- lang: eng
text: Rod-like and sheet-like nano-particles made of desoxyribonucleic acid
(DNA) fabricated by the DNA origami method (base sequence-controlled self-organized
folding of DNA) are dispersed in a lyotropic chromonic liquid crystal made of
an aqueous solution of disodium cromoglycate. The respective liquid crystalline
nanodispersions are doped with a dichroic fluorescent dye and their orientational
order parameter is studied by means of polarized fluorescence spectroscopy. The
presence of the nano-particles is found to slightly reduce the orientational order
parameter of the nematic mesophase. Nano-rods with a large length/width ratio
tend to preserve the orientational order, while more compact stiff nano-rods and
especially nano-sheets reduce the order parameter to a larger extent. In spite
of the difference between the sizes of the DNA nano-particles and the rod-like
columnar aggregates forming the liquid crystal, a similarity between the shapes
of the former and the latter seems to be better compatible with the orientational
order of the liquid crystal.
article_number: '1695'
author:
- first_name: Bingru
full_name: Zhang, Bingru
last_name: Zhang
- first_name: Kevin
full_name: Martens, Kevin
last_name: Martens
- first_name: Luisa
full_name: Kneer, Luisa
last_name: Kneer
- first_name: Timon
full_name: Funck, Timon
last_name: Funck
- first_name: Linh
full_name: Nguyen, Linh
last_name: Nguyen
- first_name: Ricarda
full_name: Berger, Ricarda
last_name: Berger
- first_name: Mihir
full_name: Dass, Mihir
last_name: Dass
- first_name: Susanne
full_name: Kempter, Susanne
last_name: Kempter
- first_name: Jürgen
full_name: Schmidtke, Jürgen
last_name: Schmidtke
- first_name: Tim
full_name: Liedl, Tim
last_name: Liedl
- first_name: Heinz-Siegfried
full_name: Kitzerow, Heinz-Siegfried
id: '254'
last_name: Kitzerow
citation:
ama: Zhang B, Martens K, Kneer L, et al. DNA Origami Nano-Sheets and Nano-Rods Alter
the Orientational Order in a Lyotropic Chromonic Liquid Crystal. Nanomaterials.
2020;10(9). doi:10.3390/nano10091695
apa: Zhang, B., Martens, K., Kneer, L., Funck, T., Nguyen, L., Berger, R., Dass,
M., Kempter, S., Schmidtke, J., Liedl, T., & Kitzerow, H.-S. (2020). DNA Origami
Nano-Sheets and Nano-Rods Alter the Orientational Order in a Lyotropic Chromonic
Liquid Crystal. Nanomaterials, 10(9), Article 1695. https://doi.org/10.3390/nano10091695
bibtex: '@article{Zhang_Martens_Kneer_Funck_Nguyen_Berger_Dass_Kempter_Schmidtke_Liedl_et
al._2020, title={DNA Origami Nano-Sheets and Nano-Rods Alter the Orientational
Order in a Lyotropic Chromonic Liquid Crystal}, volume={10}, DOI={10.3390/nano10091695},
number={91695}, journal={Nanomaterials}, publisher={MDPI AG}, author={Zhang, Bingru
and Martens, Kevin and Kneer, Luisa and Funck, Timon and Nguyen, Linh and Berger,
Ricarda and Dass, Mihir and Kempter, Susanne and Schmidtke, Jürgen and Liedl,
Tim and et al.}, year={2020} }'
chicago: Zhang, Bingru, Kevin Martens, Luisa Kneer, Timon Funck, Linh Nguyen, Ricarda
Berger, Mihir Dass, et al. “DNA Origami Nano-Sheets and Nano-Rods Alter the Orientational
Order in a Lyotropic Chromonic Liquid Crystal.” Nanomaterials 10, no. 9
(2020). https://doi.org/10.3390/nano10091695.
ieee: 'B. Zhang et al., “DNA Origami Nano-Sheets and Nano-Rods Alter the
Orientational Order in a Lyotropic Chromonic Liquid Crystal,” Nanomaterials,
vol. 10, no. 9, Art. no. 1695, 2020, doi: 10.3390/nano10091695.'
mla: Zhang, Bingru, et al. “DNA Origami Nano-Sheets and Nano-Rods Alter the Orientational
Order in a Lyotropic Chromonic Liquid Crystal.” Nanomaterials, vol. 10,
no. 9, 1695, MDPI AG, 2020, doi:10.3390/nano10091695.
short: B. Zhang, K. Martens, L. Kneer, T. Funck, L. Nguyen, R. Berger, M. Dass,
S. Kempter, J. Schmidtke, T. Liedl, H.-S. Kitzerow, Nanomaterials 10 (2020).
date_created: 2023-01-10T14:01:14Z
date_updated: 2023-01-24T17:17:14Z
department:
- _id: '313'
doi: 10.3390/nano10091695
intvolume: ' 10'
issue: '9'
keyword:
- General Materials Science
- General Chemical Engineering
language:
- iso: eng
publication: Nanomaterials
publication_identifier:
issn:
- 2079-4991
publication_status: published
publisher: MDPI AG
status: public
title: DNA Origami Nano-Sheets and Nano-Rods Alter the Orientational Order in a Lyotropic
Chromonic Liquid Crystal
type: journal_article
user_id: '254'
volume: 10
year: '2020'
...
---
_id: '40577'
article_number: '2001767'
author:
- first_name: Zhihong
full_name: Tian, Zhihong
last_name: Tian
- first_name: Nieves
full_name: Lopez Salas, Nieves
id: '98120'
last_name: Lopez Salas
orcid: https://orcid.org/0000-0002-8438-9548
- first_name: Chuntai
full_name: Liu, Chuntai
last_name: Liu
- first_name: Tianxi
full_name: Liu, Tianxi
last_name: Liu
- first_name: Markus
full_name: Antonietti, Markus
last_name: Antonietti
citation:
ama: 'Tian Z, Lopez Salas N, Liu C, Liu T, Antonietti M. C 2
N: A Class of Covalent Frameworks with Unique Properties. Advanced
Science. 2020;7(24). doi:10.1002/advs.202001767'
apa: 'Tian, Z., Lopez Salas, N., Liu, C., Liu, T., & Antonietti, M. (2020).
C 2 N: A Class of Covalent Frameworks with Unique
Properties. Advanced Science, 7(24), Article 2001767. https://doi.org/10.1002/advs.202001767'
bibtex: '@article{Tian_Lopez Salas_Liu_Liu_Antonietti_2020, title={C
2 N: A Class of Covalent Frameworks with Unique Properties},
volume={7}, DOI={10.1002/advs.202001767},
number={242001767}, journal={Advanced Science}, publisher={Wiley}, author={Tian,
Zhihong and Lopez Salas, Nieves and Liu, Chuntai and Liu, Tianxi and Antonietti,
Markus}, year={2020} }'
chicago: 'Tian, Zhihong, Nieves Lopez Salas, Chuntai Liu, Tianxi Liu, and Markus
Antonietti. “C 2 N: A Class of Covalent Frameworks
with Unique Properties.” Advanced Science 7, no. 24 (2020). https://doi.org/10.1002/advs.202001767.'
ieee: 'Z. Tian, N. Lopez Salas, C. Liu, T. Liu, and M. Antonietti, “C
2 N: A Class of Covalent Frameworks with Unique Properties,”
Advanced Science, vol. 7, no. 24, Art. no. 2001767, 2020, doi: 10.1002/advs.202001767.'
mla: 'Tian, Zhihong, et al. “C 2 N: A Class of
Covalent Frameworks with Unique Properties.” Advanced Science, vol. 7,
no. 24, 2001767, Wiley, 2020, doi:10.1002/advs.202001767.'
short: Z. Tian, N. Lopez Salas, C. Liu, T. Liu, M. Antonietti, Advanced Science
7 (2020).
date_created: 2023-01-27T16:21:09Z
date_updated: 2023-01-27T16:29:57Z
doi: 10.1002/advs.202001767
intvolume: ' 7'
issue: '24'
keyword:
- General Physics and Astronomy
- General Engineering
- Biochemistry
- Genetics and Molecular Biology (miscellaneous)
- General Materials Science
- General Chemical Engineering
- Medicine (miscellaneous)
language:
- iso: eng
publication: Advanced Science
publication_identifier:
issn:
- 2198-3844
- 2198-3844
publication_status: published
publisher: Wiley
status: public
title: 'C 2 N: A Class of Covalent Frameworks with
Unique Properties'
type: journal_article
user_id: '98120'
volume: 7
year: '2020'
...
---
_id: '40576'
author:
- first_name: Janina
full_name: Kossmann, Janina
last_name: Kossmann
- first_name: Tobias
full_name: Heil, Tobias
last_name: Heil
- first_name: Markus
full_name: Antonietti, Markus
last_name: Antonietti
- first_name: Nieves
full_name: Lopez Salas, Nieves
id: '98120'
last_name: Lopez Salas
orcid: https://orcid.org/0000-0002-8438-9548
citation:
ama: 'Kossmann J, Heil T, Antonietti M, Lopez Salas N. Guanine‐Derived Porous Carbonaceous
Materials: Towards C 1 N 1.
ChemSusChem. 2020;13(24):6643-6650. doi:10.1002/cssc.202002274'
apa: 'Kossmann, J., Heil, T., Antonietti, M., & Lopez Salas, N. (2020). Guanine‐Derived
Porous Carbonaceous Materials: Towards C 1 N
1. ChemSusChem, 13(24), 6643–6650. https://doi.org/10.1002/cssc.202002274'
bibtex: '@article{Kossmann_Heil_Antonietti_Lopez Salas_2020, title={Guanine‐Derived
Porous Carbonaceous Materials: Towards C 1 N
1}, volume={13}, DOI={10.1002/cssc.202002274},
number={24}, journal={ChemSusChem}, publisher={Wiley}, author={Kossmann, Janina
and Heil, Tobias and Antonietti, Markus and Lopez Salas, Nieves}, year={2020},
pages={6643–6650} }'
chicago: 'Kossmann, Janina, Tobias Heil, Markus Antonietti, and Nieves Lopez Salas.
“Guanine‐Derived Porous Carbonaceous Materials: Towards C 1
N 1.” ChemSusChem 13, no. 24 (2020): 6643–50.
https://doi.org/10.1002/cssc.202002274.'
ieee: 'J. Kossmann, T. Heil, M. Antonietti, and N. Lopez Salas, “Guanine‐Derived
Porous Carbonaceous Materials: Towards C 1 N
1,” ChemSusChem, vol. 13, no. 24, pp. 6643–6650, 2020,
doi: 10.1002/cssc.202002274.'
mla: 'Kossmann, Janina, et al. “Guanine‐Derived Porous Carbonaceous Materials: Towards
C 1 N 1.” ChemSusChem,
vol. 13, no. 24, Wiley, 2020, pp. 6643–50, doi:10.1002/cssc.202002274.'
short: J. Kossmann, T. Heil, M. Antonietti, N. Lopez Salas, ChemSusChem 13 (2020)
6643–6650.
date_created: 2023-01-27T16:21:04Z
date_updated: 2023-01-27T16:30:11Z
doi: 10.1002/cssc.202002274
intvolume: ' 13'
issue: '24'
keyword:
- General Energy
- General Materials Science
- General Chemical Engineering
- Environmental Chemistry
language:
- iso: eng
page: 6643-6650
publication: ChemSusChem
publication_identifier:
issn:
- 1864-5631
- 1864-564X
publication_status: published
publisher: Wiley
status: public
title: 'Guanine‐Derived Porous Carbonaceous Materials: Towards C 1 N 1'
type: journal_article
user_id: '98120'
volume: 13
year: '2020'
...
---
_id: '40574'
author:
- first_name: Janina
full_name: Kossmann, Janina
last_name: Kossmann
- first_name: Diana
full_name: Piankova, Diana
last_name: Piankova
- first_name: Nadezda V.
full_name: Tarakina, Nadezda V.
last_name: Tarakina
- first_name: Julian
full_name: Heske, Julian
last_name: Heske
- first_name: Thomas D.
full_name: Kühne, Thomas D.
last_name: Kühne
- first_name: Johannes
full_name: Schmidt, Johannes
last_name: Schmidt
- first_name: Markus
full_name: Antonietti, Markus
last_name: Antonietti
- first_name: Nieves
full_name: Lopez Salas, Nieves
id: '98120'
last_name: Lopez Salas
orcid: https://orcid.org/0000-0002-8438-9548
citation:
ama: Kossmann J, Piankova D, Tarakina NV, et al. Guanine condensates as covalent
materials and the concept of cryptopores. Carbon. 2020;172:497-505. doi:10.1016/j.carbon.2020.10.047
apa: Kossmann, J., Piankova, D., Tarakina, N. V., Heske, J., Kühne, T. D., Schmidt,
J., Antonietti, M., & Lopez Salas, N. (2020). Guanine condensates as covalent
materials and the concept of cryptopores. Carbon, 172, 497–505.
https://doi.org/10.1016/j.carbon.2020.10.047
bibtex: '@article{Kossmann_Piankova_Tarakina_Heske_Kühne_Schmidt_Antonietti_Lopez
Salas_2020, title={Guanine condensates as covalent materials and the concept of
cryptopores}, volume={172}, DOI={10.1016/j.carbon.2020.10.047},
journal={Carbon}, publisher={Elsevier BV}, author={Kossmann, Janina and Piankova,
Diana and Tarakina, Nadezda V. and Heske, Julian and Kühne, Thomas D. and Schmidt,
Johannes and Antonietti, Markus and Lopez Salas, Nieves}, year={2020}, pages={497–505}
}'
chicago: 'Kossmann, Janina, Diana Piankova, Nadezda V. Tarakina, Julian Heske, Thomas
D. Kühne, Johannes Schmidt, Markus Antonietti, and Nieves Lopez Salas. “Guanine
Condensates as Covalent Materials and the Concept of Cryptopores.” Carbon
172 (2020): 497–505. https://doi.org/10.1016/j.carbon.2020.10.047.'
ieee: 'J. Kossmann et al., “Guanine condensates as covalent materials and
the concept of cryptopores,” Carbon, vol. 172, pp. 497–505, 2020, doi:
10.1016/j.carbon.2020.10.047.'
mla: Kossmann, Janina, et al. “Guanine Condensates as Covalent Materials and the
Concept of Cryptopores.” Carbon, vol. 172, Elsevier BV, 2020, pp. 497–505,
doi:10.1016/j.carbon.2020.10.047.
short: J. Kossmann, D. Piankova, N.V. Tarakina, J. Heske, T.D. Kühne, J. Schmidt,
M. Antonietti, N. Lopez Salas, Carbon 172 (2020) 497–505.
date_created: 2023-01-27T16:20:51Z
date_updated: 2023-01-27T16:30:39Z
doi: 10.1016/j.carbon.2020.10.047
intvolume: ' 172'
keyword:
- General Chemistry
- General Materials Science
language:
- iso: eng
page: 497-505
publication: Carbon
publication_identifier:
issn:
- 0008-6223
publication_status: published
publisher: Elsevier BV
status: public
title: Guanine condensates as covalent materials and the concept of cryptopores
type: journal_article
user_id: '98120'
volume: 172
year: '2020'
...