---
_id: '33687'
article_number: '2206405'
author:
- first_name: Mateusz
full_name: Odziomek, Mateusz
last_name: Odziomek
- first_name: Paolo
full_name: Giusto, Paolo
last_name: Giusto
- first_name: Janina
full_name: Kossmann, Janina
last_name: Kossmann
- first_name: Nadezda V.
full_name: Tarakina, Nadezda V.
last_name: Tarakina
- first_name: Julian Joachim
full_name: Heske, Julian Joachim
id: '53238'
last_name: Heske
- first_name: Salvador M.
full_name: Rivadeneira, Salvador M.
last_name: Rivadeneira
- first_name: Waldemar
full_name: Keil, Waldemar
last_name: Keil
- first_name: Claudia
full_name: Schmidt, Claudia
id: '466'
last_name: Schmidt
orcid: 0000-0003-3179-9997
- first_name: Stefano
full_name: Mazzanti, Stefano
last_name: Mazzanti
- first_name: Oleksandr
full_name: Savateev, Oleksandr
last_name: Savateev
- first_name: Lorena
full_name: Perdigón‐Toro, Lorena
last_name: Perdigón‐Toro
- first_name: Dieter
full_name: Neher, Dieter
last_name: Neher
- first_name: Thomas
full_name: Kühne, Thomas
id: '49079'
last_name: Kühne
- first_name: Markus
full_name: Antonietti, Markus
last_name: Antonietti
- first_name: Nieves
full_name: López‐Salas, Nieves
last_name: López‐Salas
citation:
ama: 'Odziomek M, Giusto P, Kossmann J, et al. “Red Carbon”: A Rediscovered Covalent
Crystalline Semiconductor. Advanced Materials. 2022;34(40). doi:10.1002/adma.202206405'
apa: 'Odziomek, M., Giusto, P., Kossmann, J., Tarakina, N. V., Heske, J. J., Rivadeneira,
S. M., Keil, W., Schmidt, C., Mazzanti, S., Savateev, O., Perdigón‐Toro, L., Neher,
D., Kühne, T., Antonietti, M., & López‐Salas, N. (2022). “Red Carbon”: A Rediscovered
Covalent Crystalline Semiconductor. Advanced Materials, 34(40),
Article 2206405. https://doi.org/10.1002/adma.202206405'
bibtex: '@article{Odziomek_Giusto_Kossmann_Tarakina_Heske_Rivadeneira_Keil_Schmidt_Mazzanti_Savateev_et
al._2022, title={“Red Carbon”: A Rediscovered Covalent Crystalline Semiconductor},
volume={34}, DOI={10.1002/adma.202206405},
number={402206405}, journal={Advanced Materials}, publisher={Wiley}, author={Odziomek,
Mateusz and Giusto, Paolo and Kossmann, Janina and Tarakina, Nadezda V. and Heske,
Julian Joachim and Rivadeneira, Salvador M. and Keil, Waldemar and Schmidt, Claudia
and Mazzanti, Stefano and Savateev, Oleksandr and et al.}, year={2022} }'
chicago: 'Odziomek, Mateusz, Paolo Giusto, Janina Kossmann, Nadezda V. Tarakina,
Julian Joachim Heske, Salvador M. Rivadeneira, Waldemar Keil, et al. “‘Red Carbon’:
A Rediscovered Covalent Crystalline Semiconductor.” Advanced Materials
34, no. 40 (2022). https://doi.org/10.1002/adma.202206405.'
ieee: 'M. Odziomek et al., “‘Red Carbon’: A Rediscovered Covalent Crystalline
Semiconductor,” Advanced Materials, vol. 34, no. 40, Art. no. 2206405,
2022, doi: 10.1002/adma.202206405.'
mla: 'Odziomek, Mateusz, et al. “‘Red Carbon’: A Rediscovered Covalent Crystalline
Semiconductor.” Advanced Materials, vol. 34, no. 40, 2206405, Wiley, 2022,
doi:10.1002/adma.202206405.'
short: M. Odziomek, P. Giusto, J. Kossmann, N.V. Tarakina, J.J. Heske, S.M. Rivadeneira,
W. Keil, C. Schmidt, S. Mazzanti, O. Savateev, L. Perdigón‐Toro, D. Neher, T.
Kühne, M. Antonietti, N. López‐Salas, Advanced Materials 34 (2022).
date_created: 2022-10-11T08:19:29Z
date_updated: 2025-10-15T15:08:17Z
department:
- _id: '613'
- _id: '315'
doi: 10.1002/adma.202206405
intvolume: ' 34'
issue: '40'
keyword:
- Mechanical Engineering
- Mechanics of Materials
- General Materials Science
language:
- iso: eng
publication: Advanced Materials
publication_identifier:
issn:
- 0935-9648
- 1521-4095
publication_status: published
publisher: Wiley
quality_controlled: '1'
status: public
title: '“Red Carbon”: A Rediscovered Covalent Crystalline Semiconductor'
type: journal_article
user_id: '466'
volume: 34
year: '2022'
...
---
_id: '37713'
author:
- first_name: Fadis F.
full_name: Murzakhanov, Fadis F.
last_name: Murzakhanov
- first_name: Georgy Vladimirovich
full_name: Mamin, Georgy Vladimirovich
last_name: Mamin
- first_name: Sergei Borisovich
full_name: Orlinskii, Sergei Borisovich
last_name: Orlinskii
- first_name: Uwe
full_name: Gerstmann, Uwe
id: '171'
last_name: Gerstmann
orcid: 0000-0002-4476-223X
- first_name: Wolf Gero
full_name: Schmidt, Wolf Gero
id: '468'
last_name: Schmidt
orcid: 0000-0002-2717-5076
- first_name: Timur
full_name: Biktagirov, Timur
id: '65612'
last_name: Biktagirov
- first_name: Igor
full_name: Aharonovich, Igor
last_name: Aharonovich
- first_name: Andreas
full_name: Gottscholl, Andreas
last_name: Gottscholl
- first_name: Andreas
full_name: Sperlich, Andreas
last_name: Sperlich
- first_name: Vladimir
full_name: Dyakonov, Vladimir
last_name: Dyakonov
- first_name: Victor A.
full_name: Soltamov, Victor A.
last_name: Soltamov
citation:
ama: Murzakhanov FF, Mamin GV, Orlinskii SB, et al. Electron–Nuclear Coherent Coupling
and Nuclear Spin Readout through Optically Polarized VB–
Spin States in hBN. Nano Letters. 2022;22(7):2718-2724. doi:10.1021/acs.nanolett.1c04610
apa: Murzakhanov, F. F., Mamin, G. V., Orlinskii, S. B., Gerstmann, U., Schmidt,
W. G., Biktagirov, T., Aharonovich, I., Gottscholl, A., Sperlich, A., Dyakonov,
V., & Soltamov, V. A. (2022). Electron–Nuclear Coherent Coupling and Nuclear
Spin Readout through Optically Polarized VB– Spin States
in hBN. Nano Letters, 22(7), 2718–2724. https://doi.org/10.1021/acs.nanolett.1c04610
bibtex: '@article{Murzakhanov_Mamin_Orlinskii_Gerstmann_Schmidt_Biktagirov_Aharonovich_Gottscholl_Sperlich_Dyakonov_et
al._2022, title={Electron–Nuclear Coherent Coupling and Nuclear Spin Readout through
Optically Polarized VB– Spin States in hBN}, volume={22},
DOI={10.1021/acs.nanolett.1c04610},
number={7}, journal={Nano Letters}, publisher={American Chemical Society (ACS)},
author={Murzakhanov, Fadis F. and Mamin, Georgy Vladimirovich and Orlinskii, Sergei
Borisovich and Gerstmann, Uwe and Schmidt, Wolf Gero and Biktagirov, Timur and
Aharonovich, Igor and Gottscholl, Andreas and Sperlich, Andreas and Dyakonov,
Vladimir and et al.}, year={2022}, pages={2718–2724} }'
chicago: 'Murzakhanov, Fadis F., Georgy Vladimirovich Mamin, Sergei Borisovich Orlinskii,
Uwe Gerstmann, Wolf Gero Schmidt, Timur Biktagirov, Igor Aharonovich, et al. “Electron–Nuclear
Coherent Coupling and Nuclear Spin Readout through Optically Polarized VB–
Spin States in HBN.” Nano Letters 22, no. 7 (2022): 2718–24. https://doi.org/10.1021/acs.nanolett.1c04610.'
ieee: 'F. F. Murzakhanov et al., “Electron–Nuclear Coherent Coupling and
Nuclear Spin Readout through Optically Polarized VB– Spin
States in hBN,” Nano Letters, vol. 22, no. 7, pp. 2718–2724, 2022, doi:
10.1021/acs.nanolett.1c04610.'
mla: Murzakhanov, Fadis F., et al. “Electron–Nuclear Coherent Coupling and Nuclear
Spin Readout through Optically Polarized VB– Spin States
in HBN.” Nano Letters, vol. 22, no. 7, American Chemical Society (ACS),
2022, pp. 2718–24, doi:10.1021/acs.nanolett.1c04610.
short: F.F. Murzakhanov, G.V. Mamin, S.B. Orlinskii, U. Gerstmann, W.G. Schmidt,
T. Biktagirov, I. Aharonovich, A. Gottscholl, A. Sperlich, V. Dyakonov, V.A. Soltamov,
Nano Letters 22 (2022) 2718–2724.
date_created: 2023-01-20T11:21:22Z
date_updated: 2025-12-05T13:57:24Z
department:
- _id: '15'
- _id: '170'
- _id: '295'
- _id: '230'
- _id: '429'
- _id: '35'
- _id: '790'
doi: 10.1021/acs.nanolett.1c04610
intvolume: ' 22'
issue: '7'
keyword:
- Mechanical Engineering
- Condensed Matter Physics
- General Materials Science
- General Chemistry
- Bioengineering
language:
- iso: eng
page: 2718-2724
project:
- _id: '53'
name: 'TRR 142: TRR 142'
- _id: '54'
name: 'TRR 142 - A: TRR 142 - Project Area A'
- _id: '55'
name: 'TRR 142 - B: TRR 142 - Project Area B'
- _id: '166'
name: 'TRR 142 - A11: TRR 142 - Subproject A11'
- _id: '168'
name: 'TRR 142 - B07: TRR 142 - Subproject B07'
- _id: '52'
name: 'PC2: Computing Resources Provided by the Paderborn Center for Parallel Computing'
- _id: '53'
name: 'TRR 142: Maßgeschneiderte nichtlineare Photonik: Von grundlegenden Konzepten
zu funktionellen Strukturen'
publication: Nano Letters
publication_identifier:
issn:
- 1530-6984
- 1530-6992
publication_status: published
publisher: American Chemical Society (ACS)
status: public
title: Electron–Nuclear Coherent Coupling and Nuclear Spin Readout through Optically
Polarized VB– Spin States in hBN
type: journal_article
user_id: '16199'
volume: 22
year: '2022'
...
---
_id: '52612'
abstract:
- lang: eng
text: During resistance spot welding of zinc-coated advanced high-strength
steels (AHSSs) for automotive production, liquid metal embrittlement (LME) cracking
may occur in the event of a combination of various unfavorable influences. In
this study, the interactions of different welding current levels and weld times
on the tendency for LME cracking in third-generation AHSSs were investigated.
LME manifested itself as high-penetration cracks around the circumference of the
spot welds for welding currents closely below the expulsion limit. At the same
time, the observed tendency for LME cracking showed no direct correlation with
the overall heat input of the investigated welding processes. To identify a reliable
indicator of the tendency for LME cracking, the local strain rate at the origin
of the observed cracks was analyzed over the course of the welding process via
finite element simulation. While the local strain rate showed a good correlation
with the process-specific LME cracking tendency, it was difficult to interpret
due to its discontinuous course. Therefore, based on the experimental measurement
of electrode displacement during welding, electrode indentation velocity was proposed
as a descriptive indicator for quantifying cracking tendency.
author:
- first_name: Christoph
full_name: Böhne, Christoph
id: '22483'
last_name: Böhne
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: MAX
full_name: BIEGLER, MAX
last_name: BIEGLER
- first_name: MICHAEL
full_name: RETHMEIER, MICHAEL
last_name: RETHMEIER
citation:
ama: Böhne C, Meschut G, BIEGLER M, RETHMEIER M. The Influence of Electrode Indentation
Rate on LME Formation during RSW. Welding Journal. 2022;101(7):197-207.
doi:10.29391/2022.101.015
apa: Böhne, C., Meschut, G., BIEGLER, M., & RETHMEIER, M. (2022). The Influence
of Electrode Indentation Rate on LME Formation during RSW. Welding Journal,
101(7), 197–207. https://doi.org/10.29391/2022.101.015
bibtex: '@article{Böhne_Meschut_BIEGLER_RETHMEIER_2022, title={The Influence of
Electrode Indentation Rate on LME Formation during RSW}, volume={101}, DOI={10.29391/2022.101.015}, number={7},
journal={Welding Journal}, publisher={American Welding Society}, author={Böhne,
Christoph and Meschut, Gerson and BIEGLER, MAX and RETHMEIER, MICHAEL}, year={2022},
pages={197–207} }'
chicago: 'Böhne, Christoph, Gerson Meschut, MAX BIEGLER, and MICHAEL RETHMEIER.
“The Influence of Electrode Indentation Rate on LME Formation during RSW.” Welding
Journal 101, no. 7 (2022): 197–207. https://doi.org/10.29391/2022.101.015.'
ieee: 'C. Böhne, G. Meschut, M. BIEGLER, and M. RETHMEIER, “The Influence of Electrode
Indentation Rate on LME Formation during RSW,” Welding Journal, vol. 101,
no. 7, pp. 197–207, 2022, doi: 10.29391/2022.101.015.'
mla: Böhne, Christoph, et al. “The Influence of Electrode Indentation Rate on LME
Formation during RSW.” Welding Journal, vol. 101, no. 7, American Welding
Society, 2022, pp. 197–207, doi:10.29391/2022.101.015.
short: C. Böhne, G. Meschut, M. BIEGLER, M. RETHMEIER, Welding Journal 101 (2022)
197–207.
date_created: 2024-03-18T11:51:57Z
date_updated: 2025-08-07T09:29:30Z
department:
- _id: '157'
doi: 10.29391/2022.101.015
intvolume: ' 101'
issue: '7'
keyword:
- Metals and Alloys
- Mechanical Engineering
- Mechanics of Materials
language:
- iso: eng
page: 197-207
popular_science: '1'
publication: Welding Journal
publication_identifier:
issn:
- 0043-2296
- 2689-0445
publication_status: published
publisher: American Welding Society
quality_controlled: '1'
status: public
title: The Influence of Electrode Indentation Rate on LME Formation during RSW
type: journal_article
user_id: '60398'
volume: 101
year: '2022'
...
---
_id: '37647'
abstract:
- lang: eng
text: Mechanical joining processes are an essential part of modern lightweight construction.
They permit materials of different types to be joined in a way that is suitable
for the loads involved. These processes reach their limits, however, as soon as
the boundary conditions change. In most cases, these elements are specially adapted
to the joining point and cannot be used universally. Changes require cost-intensive
adaptation of both the element and the process control, thus making production
more complex. This results in high costs due to the increased number of auxiliary
joining element variants required and reduces the economic efficiency of mechanical
joining. One approach to overcoming this issue is the use of adaptive auxiliary
joining elements formed by friction spinning. This article presents the current
state of research on pre-hole-free joining with adaptive joining elements. The
overall process chain is illustrated, explained and analyzed. Special attention
is paid to demonstrating the feasibility of pre-hole-free joining with adaptive
joining elements. The chosen mechanical parameters are subsequently listed. Finally,
a comprehensive outlook of the future development potential is derived.
article_type: original
author:
- first_name: Christian
full_name: Wischer, Christian
last_name: Wischer
- first_name: Werner
full_name: Homberg, Werner
last_name: Homberg
citation:
ama: Wischer C, Homberg W. Further Development of an Adaptive Joining Technique
Based on Friction Spinning to Produce Pre-Hole-Free Joints. Key Engineering
Materials. 2022;926:1468-1478. doi:10.4028/p-1n6741
apa: Wischer, C., & Homberg, W. (2022). Further Development of an Adaptive Joining
Technique Based on Friction Spinning to Produce Pre-Hole-Free Joints. Key Engineering
Materials, 926, 1468–1478. https://doi.org/10.4028/p-1n6741
bibtex: '@article{Wischer_Homberg_2022, title={Further Development of an Adaptive
Joining Technique Based on Friction Spinning to Produce Pre-Hole-Free Joints},
volume={926}, DOI={10.4028/p-1n6741},
journal={Key Engineering Materials}, publisher={Trans Tech Publications, Ltd.},
author={Wischer, Christian and Homberg, Werner}, year={2022}, pages={1468–1478}
}'
chicago: 'Wischer, Christian, and Werner Homberg. “Further Development of an Adaptive
Joining Technique Based on Friction Spinning to Produce Pre-Hole-Free Joints.”
Key Engineering Materials 926 (2022): 1468–78. https://doi.org/10.4028/p-1n6741.'
ieee: 'C. Wischer and W. Homberg, “Further Development of an Adaptive Joining Technique
Based on Friction Spinning to Produce Pre-Hole-Free Joints,” Key Engineering
Materials, vol. 926, pp. 1468–1478, 2022, doi: 10.4028/p-1n6741.'
mla: Wischer, Christian, and Werner Homberg. “Further Development of an Adaptive
Joining Technique Based on Friction Spinning to Produce Pre-Hole-Free Joints.”
Key Engineering Materials, vol. 926, Trans Tech Publications, Ltd., 2022,
pp. 1468–78, doi:10.4028/p-1n6741.
short: C. Wischer, W. Homberg, Key Engineering Materials 926 (2022) 1468–1478.
date_created: 2023-01-20T07:47:18Z
date_updated: 2026-05-12T12:00:20Z
department:
- _id: '156'
doi: 10.4028/p-1n6741
intvolume: ' 926'
keyword:
- Mechanical Engineering
- Mechanics of Materials
- General Materials Science
language:
- iso: eng
page: 1468-1478
project:
- _id: '147'
name: 'TRR 285 – C03: TRR 285 - Subproject C03'
- _id: '133'
name: TRR 285 - Project Area C
- _id: '130'
name: 'TRR 285: Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen
Prozessketten'
publication: Key Engineering Materials
publication_identifier:
issn:
- 1662-9795
publication_status: published
publisher: Trans Tech Publications, Ltd.
quality_controlled: '1'
status: public
title: Further Development of an Adaptive Joining Technique Based on Friction Spinning
to Produce Pre-Hole-Free Joints
type: journal_article
user_id: '7850'
volume: 926
year: '2022'
...
---
_id: '30963'
abstract:
- lang: eng
text: In this paper, a study based on experimental and numerical simulations is
performed to analyze fatigue cracks in clinched joints. An experimental investigation
is conducted to determine the failure modes of clinched joints under cyclic loading
at different load amplitudes with single-lap shear tests. In addition, numerical
FEM simulations of clinching process and subsequent shear loading are performed
to support the experimental investigations by analyzing the state of stresses
at the location of failure. An attempt is made to explain the location of crack
initiation in the experiments using evaluation variables such as contact shear
stress and maximum principal stress.
author:
- first_name: Lars
full_name: Ewenz, Lars
last_name: Ewenz
- first_name: Christian Roman
full_name: Bielak, Christian Roman
id: '34782'
last_name: Bielak
- first_name: Mortaza
full_name: Otroshi, Mortaza
id: '71269'
last_name: Otroshi
orcid: 0000-0002-8652-9209
- first_name: Mathias
full_name: Bobbert, Mathias
id: '7850'
last_name: Bobbert
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: Martina
full_name: Zimmermann, Martina
last_name: Zimmermann
citation:
ama: Ewenz L, Bielak CR, Otroshi M, Bobbert M, Meschut G, Zimmermann M. Numerical
and experimental identification of fatigue crack initiation sites in clinched
joints. Production Engineering. 2022;16(2-3):305-313. doi:10.1007/s11740-022-01124-z
apa: Ewenz, L., Bielak, C. R., Otroshi, M., Bobbert, M., Meschut, G., & Zimmermann,
M. (2022). Numerical and experimental identification of fatigue crack initiation
sites in clinched joints. Production Engineering, 16(2–3), 305–313.
https://doi.org/10.1007/s11740-022-01124-z
bibtex: '@article{Ewenz_Bielak_Otroshi_Bobbert_Meschut_Zimmermann_2022, title={Numerical
and experimental identification of fatigue crack initiation sites in clinched
joints}, volume={16}, DOI={10.1007/s11740-022-01124-z},
number={2–3}, journal={Production Engineering}, publisher={Springer Science and
Business Media LLC}, author={Ewenz, Lars and Bielak, Christian Roman and Otroshi,
Mortaza and Bobbert, Mathias and Meschut, Gerson and Zimmermann, Martina}, year={2022},
pages={305–313} }'
chicago: 'Ewenz, Lars, Christian Roman Bielak, Mortaza Otroshi, Mathias Bobbert,
Gerson Meschut, and Martina Zimmermann. “Numerical and Experimental Identification
of Fatigue Crack Initiation Sites in Clinched Joints.” Production Engineering
16, no. 2–3 (2022): 305–13. https://doi.org/10.1007/s11740-022-01124-z.'
ieee: 'L. Ewenz, C. R. Bielak, M. Otroshi, M. Bobbert, G. Meschut, and M. Zimmermann,
“Numerical and experimental identification of fatigue crack initiation sites in
clinched joints,” Production Engineering, vol. 16, no. 2–3, pp. 305–313,
2022, doi: 10.1007/s11740-022-01124-z.'
mla: Ewenz, Lars, et al. “Numerical and Experimental Identification of Fatigue Crack
Initiation Sites in Clinched Joints.” Production Engineering, vol. 16,
no. 2–3, Springer Science and Business Media LLC, 2022, pp. 305–13, doi:10.1007/s11740-022-01124-z.
short: L. Ewenz, C.R. Bielak, M. Otroshi, M. Bobbert, G. Meschut, M. Zimmermann,
Production Engineering 16 (2022) 305–313.
date_created: 2022-04-27T09:02:05Z
date_updated: 2026-05-12T13:03:16Z
department:
- _id: '157'
doi: 10.1007/s11740-022-01124-z
intvolume: ' 16'
issue: 2-3
keyword:
- Industrial and Manufacturing Engineering
- Mechanical Engineering
language:
- iso: eng
page: 305-313
project:
- _id: '132'
name: 'TRR 285 - B: TRR 285 - Project Area B'
- _id: '141'
name: 'TRR 285 – B02: TRR 285 - Subproject B02'
- _id: '131'
name: 'TRR 285 - A: TRR 285 - Project Area A'
- _id: '135'
name: 'TRR 285 – A01: TRR 285 - Subproject A01'
- _id: '130'
name: 'TRR 285: Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen
Prozessketten'
publication: Production Engineering
publication_identifier:
issn:
- 0944-6524
- 1863-7353
publication_status: published
publisher: Springer Science and Business Media LLC
quality_controlled: '1'
status: public
title: Numerical and experimental identification of fatigue crack initiation sites
in clinched joints
type: journal_article
user_id: '7850'
volume: 16
year: '2022'
...
---
_id: '34257'
abstract:
- lang: eng
text: Galvanic corrosion is a destructive process between dissimilar metals. The
present paper presents a constructed numerical test case to simulate galvanic
corrosion of two dissimilar metals. This test case is used to study the accuracy
of different implementations to track the dissolving anode boundary. One technique
is to numerically simulate a mesh displacement based on the prescribed displacement
at the anode boundary. The second method is to adjust only the boundary elements.
Re-meshing after a certain number of time steps is applied to both implementations.
They produce similar results for an electrical and electrochemical field problem.
This work shows that mesh smoothing does not result in higher accuracy when modeling
a moving anode front. Adjusting only the boundary elements is sufficient when
frequent re-meshing is used.
author:
- first_name: Sven
full_name: Harzheim, Sven
last_name: Harzheim
- first_name: Martin
full_name: Hofmann, Martin
last_name: Hofmann
- first_name: Thomas
full_name: Wallmersperger, Thomas
last_name: Wallmersperger
citation:
ama: Harzheim S, Hofmann M, Wallmersperger T. Comparison of two mesh-moving techniques
for finite element simulations of galvanic corrosion. Acta Mechanica. 2022;233(11):4427-4439.
doi:10.1007/s00707-022-03326-z
apa: Harzheim, S., Hofmann, M., & Wallmersperger, T. (2022). Comparison of two
mesh-moving techniques for finite element simulations of galvanic corrosion. Acta
Mechanica, 233(11), 4427–4439. https://doi.org/10.1007/s00707-022-03326-z
bibtex: '@article{Harzheim_Hofmann_Wallmersperger_2022, title={Comparison of two
mesh-moving techniques for finite element simulations of galvanic corrosion},
volume={233}, DOI={10.1007/s00707-022-03326-z},
number={11}, journal={Acta Mechanica}, publisher={Springer Science and Business
Media LLC}, author={Harzheim, Sven and Hofmann, Martin and Wallmersperger, Thomas},
year={2022}, pages={4427–4439} }'
chicago: 'Harzheim, Sven, Martin Hofmann, and Thomas Wallmersperger. “Comparison
of Two Mesh-Moving Techniques for Finite Element Simulations of Galvanic Corrosion.”
Acta Mechanica 233, no. 11 (2022): 4427–39. https://doi.org/10.1007/s00707-022-03326-z.'
ieee: 'S. Harzheim, M. Hofmann, and T. Wallmersperger, “Comparison of two mesh-moving
techniques for finite element simulations of galvanic corrosion,” Acta Mechanica,
vol. 233, no. 11, pp. 4427–4439, 2022, doi: 10.1007/s00707-022-03326-z.'
mla: Harzheim, Sven, et al. “Comparison of Two Mesh-Moving Techniques for Finite
Element Simulations of Galvanic Corrosion.” Acta Mechanica, vol. 233, no.
11, Springer Science and Business Media LLC, 2022, pp. 4427–39, doi:10.1007/s00707-022-03326-z.
short: S. Harzheim, M. Hofmann, T. Wallmersperger, Acta Mechanica 233 (2022) 4427–4439.
date_created: 2022-12-06T20:47:16Z
date_updated: 2026-05-12T12:55:52Z
department:
- _id: '630'
doi: 10.1007/s00707-022-03326-z
intvolume: ' 233'
issue: '11'
keyword:
- Mechanical Engineering
- Computational Mechanics
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://link.springer.com/article/10.1007/s00707-022-03326-z
oa: '1'
page: 4427-4439
project:
- _id: '130'
name: 'TRR 285: TRR 285'
- _id: '142'
name: 'TRR 285 – B03: TRR 285 - Subproject B03'
- _id: '132'
name: TRR 285 - Project Area B
publication: Acta Mechanica
publication_identifier:
issn:
- 0001-5970
- 1619-6937
publication_status: published
publisher: Springer Science and Business Media LLC
status: public
title: Comparison of two mesh-moving techniques for finite element simulations of
galvanic corrosion
type: journal_article
user_id: '7850'
volume: 233
year: '2022'
...
---
_id: '34069'
article_number: '100133'
author:
- first_name: Britta
full_name: Schramm, Britta
id: '4668'
last_name: Schramm
- first_name: Sven
full_name: Martin, Sven
id: '38177'
last_name: Martin
- first_name: Christian
full_name: Steinfelder, Christian
last_name: Steinfelder
- first_name: Christian Roman
full_name: Bielak, Christian Roman
id: '34782'
last_name: Bielak
- first_name: Alexander
full_name: Brosius, Alexander
last_name: Brosius
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
- first_name: Thomas
full_name: Wallmersperger, Thomas
last_name: Wallmersperger
- first_name: Julia
full_name: Mergheim, Julia
last_name: Mergheim
citation:
ama: 'Schramm B, Martin S, Steinfelder C, et al. A Review on the Modeling of the
Clinching Process Chain - Part I: Design Phase. Journal of Advanced Joining
Processes. 2022;6. doi:10.1016/j.jajp.2022.100133'
apa: 'Schramm, B., Martin, S., Steinfelder, C., Bielak, C. R., Brosius, A., Meschut,
G., Tröster, T., Wallmersperger, T., & Mergheim, J. (2022). A Review on the
Modeling of the Clinching Process Chain - Part I: Design Phase. Journal of
Advanced Joining Processes, 6, Article 100133. https://doi.org/10.1016/j.jajp.2022.100133'
bibtex: '@article{Schramm_Martin_Steinfelder_Bielak_Brosius_Meschut_Tröster_Wallmersperger_Mergheim_2022,
title={A Review on the Modeling of the Clinching Process Chain - Part I: Design
Phase}, volume={6}, DOI={10.1016/j.jajp.2022.100133},
number={100133}, journal={Journal of Advanced Joining Processes}, publisher={Elsevier
BV}, author={Schramm, Britta and Martin, Sven and Steinfelder, Christian and Bielak,
Christian Roman and Brosius, Alexander and Meschut, Gerson and Tröster, Thomas
and Wallmersperger, Thomas and Mergheim, Julia}, year={2022} }'
chicago: 'Schramm, Britta, Sven Martin, Christian Steinfelder, Christian Roman Bielak,
Alexander Brosius, Gerson Meschut, Thomas Tröster, Thomas Wallmersperger, and
Julia Mergheim. “A Review on the Modeling of the Clinching Process Chain - Part
I: Design Phase.” Journal of Advanced Joining Processes 6 (2022). https://doi.org/10.1016/j.jajp.2022.100133.'
ieee: 'B. Schramm et al., “A Review on the Modeling of the Clinching Process
Chain - Part I: Design Phase,” Journal of Advanced Joining Processes, vol.
6, Art. no. 100133, 2022, doi: 10.1016/j.jajp.2022.100133.'
mla: 'Schramm, Britta, et al. “A Review on the Modeling of the Clinching Process
Chain - Part I: Design Phase.” Journal of Advanced Joining Processes, vol.
6, 100133, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100133.'
short: B. Schramm, S. Martin, C. Steinfelder, C.R. Bielak, A. Brosius, G. Meschut,
T. Tröster, T. Wallmersperger, J. Mergheim, Journal of Advanced Joining Processes
6 (2022).
date_created: 2022-11-14T08:53:49Z
date_updated: 2026-05-12T12:59:39Z
department:
- _id: '143'
- _id: '157'
doi: 10.1016/j.jajp.2022.100133
intvolume: ' 6'
keyword:
- Mechanical Engineering
- Mechanics of Materials
- Engineering (miscellaneous)
- Chemical Engineering (miscellaneous)
language:
- iso: eng
project:
- _id: '130'
name: 'TRR 285: TRR 285'
- _id: '143'
name: 'TRR 285 – B04: TRR 285 - Subproject B04'
- _id: '140'
name: 'TRR 285 – B01: TRR 285 - Subproject B01'
- _id: '135'
name: 'TRR 285 – A01: TRR 285 - Subproject A01'
- _id: '142'
name: 'TRR 285 – B03: TRR 285 - Subproject B03'
- _id: '139'
name: 'TRR 285 – A05: TRR 285 - Subproject A05'
- _id: '132'
name: TRR 285 - Project Area B
- _id: '131'
name: TRR 285 - Project Area A
publication: Journal of Advanced Joining Processes
publication_identifier:
issn:
- 2666-3309
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: 'A Review on the Modeling of the Clinching Process Chain - Part I: Design Phase'
type: journal_article
user_id: '7850'
volume: 6
year: '2022'
...
---
_id: '34068'
article_number: '100134'
author:
- first_name: Britta
full_name: Schramm, Britta
id: '4668'
last_name: Schramm
- first_name: Johannes
full_name: Friedlein, Johannes
last_name: Friedlein
- first_name: Benjamin
full_name: Gröger, Benjamin
last_name: Gröger
- first_name: Christian Roman
full_name: Bielak, Christian Roman
id: '34782'
last_name: Bielak
- first_name: Mathias
full_name: Bobbert, Mathias
id: '7850'
last_name: Bobbert
- first_name: Maik
full_name: Gude, Maik
last_name: Gude
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: Thomas
full_name: Wallmersperger, Thomas
last_name: Wallmersperger
- first_name: Julia
full_name: Mergheim, Julia
last_name: Mergheim
citation:
ama: 'Schramm B, Friedlein J, Gröger B, et al. A Review on the Modeling of the Clinching
Process Chain - Part II: Joining Process. Journal of Advanced Joining Processes.
Published online 2022. doi:10.1016/j.jajp.2022.100134'
apa: 'Schramm, B., Friedlein, J., Gröger, B., Bielak, C. R., Bobbert, M., Gude,
M., Meschut, G., Wallmersperger, T., & Mergheim, J. (2022). A Review on the
Modeling of the Clinching Process Chain - Part II: Joining Process. Journal
of Advanced Joining Processes, Article 100134. https://doi.org/10.1016/j.jajp.2022.100134'
bibtex: '@article{Schramm_Friedlein_Gröger_Bielak_Bobbert_Gude_Meschut_Wallmersperger_Mergheim_2022,
title={A Review on the Modeling of the Clinching Process Chain - Part II: Joining
Process}, DOI={10.1016/j.jajp.2022.100134},
number={100134}, journal={Journal of Advanced Joining Processes}, publisher={Elsevier
BV}, author={Schramm, Britta and Friedlein, Johannes and Gröger, Benjamin and
Bielak, Christian Roman and Bobbert, Mathias and Gude, Maik and Meschut, Gerson
and Wallmersperger, Thomas and Mergheim, Julia}, year={2022} }'
chicago: 'Schramm, Britta, Johannes Friedlein, Benjamin Gröger, Christian Roman
Bielak, Mathias Bobbert, Maik Gude, Gerson Meschut, Thomas Wallmersperger, and
Julia Mergheim. “A Review on the Modeling of the Clinching Process Chain - Part
II: Joining Process.” Journal of Advanced Joining Processes, 2022. https://doi.org/10.1016/j.jajp.2022.100134.'
ieee: 'B. Schramm et al., “A Review on the Modeling of the Clinching Process
Chain - Part II: Joining Process,” Journal of Advanced Joining Processes,
Art. no. 100134, 2022, doi: 10.1016/j.jajp.2022.100134.'
mla: 'Schramm, Britta, et al. “A Review on the Modeling of the Clinching Process
Chain - Part II: Joining Process.” Journal of Advanced Joining Processes,
100134, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100134.'
short: B. Schramm, J. Friedlein, B. Gröger, C.R. Bielak, M. Bobbert, M. Gude, G.
Meschut, T. Wallmersperger, J. Mergheim, Journal of Advanced Joining Processes
(2022).
date_created: 2022-11-14T08:53:07Z
date_updated: 2026-05-12T12:58:23Z
department:
- _id: '143'
- _id: '157'
doi: 10.1016/j.jajp.2022.100134
keyword:
- Mechanical Engineering
- Mechanics of Materials
- Engineering (miscellaneous)
- Chemical Engineering (miscellaneous)
language:
- iso: eng
project:
- _id: '130'
name: 'TRR 285: TRR 285'
- _id: '143'
name: 'TRR 285 – B04: TRR 285 - Subproject B04'
- _id: '139'
name: 'TRR 285 – A05: TRR 285 - Subproject A05'
- _id: '137'
name: 'TRR 285 – A03: TRR 285 - Subproject A03'
- _id: '135'
name: 'TRR 285 – A01: TRR 285 - Subproject A01'
- _id: '142'
name: 'TRR 285 – B03: TRR 285 - Subproject B03'
- _id: '131'
name: TRR 285 - Project Area A
- _id: '132'
name: TRR 285 - Project Area B
publication: Journal of Advanced Joining Processes
publication_identifier:
issn:
- 2666-3309
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: 'A Review on the Modeling of the Clinching Process Chain - Part II: Joining
Process'
type: journal_article
user_id: '7850'
year: '2022'
...
---
_id: '34070'
article_number: '100135'
author:
- first_name: Britta
full_name: Schramm, Britta
id: '4668'
last_name: Schramm
- first_name: Sven
full_name: Harzheim, Sven
last_name: Harzheim
- first_name: Deborah
full_name: Weiß, Deborah
id: '45673'
last_name: Weiß
- first_name: Tintu David
full_name: Joy, Tintu David
id: '30821'
last_name: Joy
- first_name: Martin
full_name: Hofmann, Martin
last_name: Hofmann
- first_name: Julia
full_name: Mergheim, Julia
last_name: Mergheim
- first_name: Thomas
full_name: Wallmersperger, Thomas
last_name: Wallmersperger
citation:
ama: 'Schramm B, Harzheim S, Weiß D, et al. A Review on the Modeling of the Clinching
Process Chain - Part III: Operational Phase. Journal of Advanced Joining Processes.
Published online 2022. doi:10.1016/j.jajp.2022.100135'
apa: 'Schramm, B., Harzheim, S., Weiß, D., Joy, T. D., Hofmann, M., Mergheim, J.,
& Wallmersperger, T. (2022). A Review on the Modeling of the Clinching Process
Chain - Part III: Operational Phase. Journal of Advanced Joining Processes,
Article 100135. https://doi.org/10.1016/j.jajp.2022.100135'
bibtex: '@article{Schramm_Harzheim_Weiß_Joy_Hofmann_Mergheim_Wallmersperger_2022,
title={A Review on the Modeling of the Clinching Process Chain - Part III: Operational
Phase}, DOI={10.1016/j.jajp.2022.100135},
number={100135}, journal={Journal of Advanced Joining Processes}, publisher={Elsevier
BV}, author={Schramm, Britta and Harzheim, Sven and Weiß, Deborah and Joy, Tintu
David and Hofmann, Martin and Mergheim, Julia and Wallmersperger, Thomas}, year={2022}
}'
chicago: 'Schramm, Britta, Sven Harzheim, Deborah Weiß, Tintu David Joy, Martin
Hofmann, Julia Mergheim, and Thomas Wallmersperger. “A Review on the Modeling
of the Clinching Process Chain - Part III: Operational Phase.” Journal of Advanced
Joining Processes, 2022. https://doi.org/10.1016/j.jajp.2022.100135.'
ieee: 'B. Schramm et al., “A Review on the Modeling of the Clinching Process
Chain - Part III: Operational Phase,” Journal of Advanced Joining Processes,
Art. no. 100135, 2022, doi: 10.1016/j.jajp.2022.100135.'
mla: 'Schramm, Britta, et al. “A Review on the Modeling of the Clinching Process
Chain - Part III: Operational Phase.” Journal of Advanced Joining Processes,
100135, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100135.'
short: B. Schramm, S. Harzheim, D. Weiß, T.D. Joy, M. Hofmann, J. Mergheim, T. Wallmersperger,
Journal of Advanced Joining Processes (2022).
date_created: 2022-11-14T08:55:34Z
date_updated: 2026-05-12T12:52:34Z
department:
- _id: '143'
doi: 10.1016/j.jajp.2022.100135
keyword:
- Mechanical Engineering
- Mechanics of Materials
- Engineering (miscellaneous)
- Chemical Engineering (miscellaneous)
language:
- iso: eng
project:
- _id: '130'
name: 'TRR 285: TRR 285'
- _id: '143'
name: 'TRR 285 – B04: TRR 285 - Subproject B04'
- _id: '142'
name: 'TRR 285 – B03: TRR 285 - Subproject B03'
- _id: '139'
name: 'TRR 285 – A05: TRR 285 - Subproject A05'
- _id: '132'
name: TRR 285 - Project Area B
- _id: '131'
name: TRR 285 - Project Area A
publication: Journal of Advanced Joining Processes
publication_identifier:
issn:
- 2666-3309
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: 'A Review on the Modeling of the Clinching Process Chain - Part III: Operational
Phase'
type: journal_article
user_id: '7850'
year: '2022'
...
---
_id: '31238'
article_number: '100108'
author:
- first_name: Robert
full_name: Kupfer, Robert
last_name: Kupfer
- first_name: Daniel
full_name: Köhler, Daniel
last_name: Köhler
- first_name: David
full_name: Römisch, David
last_name: Römisch
- first_name: Simon
full_name: Wituschek, Simon
last_name: Wituschek
- first_name: Lars
full_name: Ewenz, Lars
last_name: Ewenz
- first_name: Jan
full_name: Kalich, Jan
last_name: Kalich
- first_name: Deborah
full_name: Weiß, Deborah
id: '45673'
last_name: Weiß
- first_name: Behdad
full_name: Sadeghian, Behdad
last_name: Sadeghian
- first_name: Matthias
full_name: Busch, Matthias
last_name: Busch
- first_name: Jan Tobias
full_name: Krüger, Jan Tobias
id: '44307'
last_name: Krüger
orcid: 0000-0002-0827-9654
- first_name: Moritz
full_name: Neuser, Moritz
id: '32340'
last_name: Neuser
- first_name: Olexandr
full_name: Grydin, Olexandr
id: '43822'
last_name: Grydin
- first_name: Max
full_name: Böhnke, Max
id: '45779'
last_name: Böhnke
- first_name: Christian-Roman
full_name: Bielak, Christian-Roman
last_name: Bielak
- first_name: Juliane
full_name: Troschitz, Juliane
last_name: Troschitz
citation:
ama: Kupfer R, Köhler D, Römisch D, et al. Clinching of Aluminum Materials – Methods
for the Continuous Characterization of Process, Microstructure and Properties.
Journal of Advanced Joining Processes. Published online 2022. doi:10.1016/j.jajp.2022.100108
apa: Kupfer, R., Köhler, D., Römisch, D., Wituschek, S., Ewenz, L., Kalich, J.,
Weiß, D., Sadeghian, B., Busch, M., Krüger, J. T., Neuser, M., Grydin, O., Böhnke,
M., Bielak, C.-R., & Troschitz, J. (2022). Clinching of Aluminum Materials
– Methods for the Continuous Characterization of Process, Microstructure and Properties.
Journal of Advanced Joining Processes, Article 100108. https://doi.org/10.1016/j.jajp.2022.100108
bibtex: '@article{Kupfer_Köhler_Römisch_Wituschek_Ewenz_Kalich_Weiß_Sadeghian_Busch_Krüger_et
al._2022, title={Clinching of Aluminum Materials – Methods for the Continuous
Characterization of Process, Microstructure and Properties}, DOI={10.1016/j.jajp.2022.100108},
number={100108}, journal={Journal of Advanced Joining Processes}, publisher={Elsevier
BV}, author={Kupfer, Robert and Köhler, Daniel and Römisch, David and Wituschek,
Simon and Ewenz, Lars and Kalich, Jan and Weiß, Deborah and Sadeghian, Behdad
and Busch, Matthias and Krüger, Jan Tobias and et al.}, year={2022} }'
chicago: Kupfer, Robert, Daniel Köhler, David Römisch, Simon Wituschek, Lars Ewenz,
Jan Kalich, Deborah Weiß, et al. “Clinching of Aluminum Materials – Methods for
the Continuous Characterization of Process, Microstructure and Properties.” Journal
of Advanced Joining Processes, 2022. https://doi.org/10.1016/j.jajp.2022.100108.
ieee: 'R. Kupfer et al., “Clinching of Aluminum Materials – Methods for the
Continuous Characterization of Process, Microstructure and Properties,” Journal
of Advanced Joining Processes, Art. no. 100108, 2022, doi: 10.1016/j.jajp.2022.100108.'
mla: Kupfer, Robert, et al. “Clinching of Aluminum Materials – Methods for the Continuous
Characterization of Process, Microstructure and Properties.” Journal of Advanced
Joining Processes, 100108, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100108.
short: R. Kupfer, D. Köhler, D. Römisch, S. Wituschek, L. Ewenz, J. Kalich, D. Weiß,
B. Sadeghian, M. Busch, J.T. Krüger, M. Neuser, O. Grydin, M. Böhnke, C.-R. Bielak,
J. Troschitz, Journal of Advanced Joining Processes (2022).
date_created: 2022-05-12T13:48:16Z
date_updated: 2026-05-12T13:49:43Z
department:
- _id: '158'
doi: 10.1016/j.jajp.2022.100108
keyword:
- Mechanical Engineering
- Mechanics of Materials
- Engineering (miscellaneous)
- Chemical Engineering (miscellaneous)
language:
- iso: eng
project:
- _id: '131'
name: 'TRR 285 - A: TRR 285 - Project Area A'
- _id: '136'
name: 'TRR 285 – A02: TRR 285 - Subproject A02'
- _id: '130'
name: 'TRR 285: Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen
Prozessketten'
publication: Journal of Advanced Joining Processes
publication_identifier:
issn:
- 2666-3309
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: Clinching of Aluminum Materials – Methods for the Continuous Characterization
of Process, Microstructure and Properties
type: journal_article
user_id: '7850'
year: '2022'
...
---
_id: '33658'
abstract:
- lang: eng
text: We demonstrate how to fully ascribe Raman peaks simulated using ab
initio molecular dynamics to specific vibrations in the structure at finite temperatures
by means of Wannier functions. Here, we adopt our newly introduced method for
the simulation of the Raman spectra in which the total polarizability of the system
is expressed as a sum over Wannier polarizabilities. The assignment is then based
on the calculation of partial Raman activities arising from self- and/or cross-correlations
between different types of Wannier functions in the system. Different types of
Wannier functions can be distinguished based on their spatial spread. To demonstrate
the predictive power of this approach, we applied it to the case of a cyclohexane
molecule in the gas phase and were able to fully assign the simulated Raman peaks.
article_number: '1212'
author:
- first_name: Pouya
full_name: Partovi-Azar, Pouya
last_name: Partovi-Azar
- first_name: Thomas
full_name: Kühne, Thomas
id: '49079'
last_name: Kühne
citation:
ama: 'Partovi-Azar P, Kühne T. Full Assignment of Ab-Initio Raman Spectra at Finite
Temperatures Using Wannier Polarizabilities: Application to Cyclohexane Molecule
in Gas Phase. Micromachines. 2021;12(10). doi:10.3390/mi12101212'
apa: 'Partovi-Azar, P., & Kühne, T. (2021). Full Assignment of Ab-Initio Raman
Spectra at Finite Temperatures Using Wannier Polarizabilities: Application to
Cyclohexane Molecule in Gas Phase. Micromachines, 12(10), Article
1212. https://doi.org/10.3390/mi12101212'
bibtex: '@article{Partovi-Azar_Kühne_2021, title={Full Assignment of Ab-Initio Raman
Spectra at Finite Temperatures Using Wannier Polarizabilities: Application to
Cyclohexane Molecule in Gas Phase}, volume={12}, DOI={10.3390/mi12101212},
number={101212}, journal={Micromachines}, publisher={MDPI AG}, author={Partovi-Azar,
Pouya and Kühne, Thomas}, year={2021} }'
chicago: 'Partovi-Azar, Pouya, and Thomas Kühne. “Full Assignment of Ab-Initio Raman
Spectra at Finite Temperatures Using Wannier Polarizabilities: Application to
Cyclohexane Molecule in Gas Phase.” Micromachines 12, no. 10 (2021). https://doi.org/10.3390/mi12101212.'
ieee: 'P. Partovi-Azar and T. Kühne, “Full Assignment of Ab-Initio Raman Spectra
at Finite Temperatures Using Wannier Polarizabilities: Application to Cyclohexane
Molecule in Gas Phase,” Micromachines, vol. 12, no. 10, Art. no. 1212,
2021, doi: 10.3390/mi12101212.'
mla: 'Partovi-Azar, Pouya, and Thomas Kühne. “Full Assignment of Ab-Initio Raman
Spectra at Finite Temperatures Using Wannier Polarizabilities: Application to
Cyclohexane Molecule in Gas Phase.” Micromachines, vol. 12, no. 10, 1212,
MDPI AG, 2021, doi:10.3390/mi12101212.'
short: P. Partovi-Azar, T. Kühne, Micromachines 12 (2021).
date_created: 2022-10-10T08:24:47Z
date_updated: 2022-10-10T08:24:57Z
department:
- _id: '613'
doi: 10.3390/mi12101212
intvolume: ' 12'
issue: '10'
keyword:
- Electrical and Electronic Engineering
- Mechanical Engineering
- Control and Systems Engineering
language:
- iso: eng
publication: Micromachines
publication_identifier:
issn:
- 2072-666X
publication_status: published
publisher: MDPI AG
status: public
title: 'Full Assignment of Ab-Initio Raman Spectra at Finite Temperatures Using Wannier
Polarizabilities: Application to Cyclohexane Molecule in Gas Phase'
type: journal_article
user_id: '71051'
volume: 12
year: '2021'
...
---
_id: '35327'
article_number: '121536'
article_type: original
author:
- first_name: Martin
full_name: Wortmann, Martin
last_name: Wortmann
- first_name: Klaus
full_name: Viertel, Klaus
last_name: Viertel
- first_name: Alexander
full_name: Welle, Alexander
last_name: Welle
- first_name: Waldemar
full_name: Keil, Waldemar
last_name: Keil
- first_name: Natalie
full_name: Frese, Natalie
last_name: Frese
- first_name: Wiebke
full_name: Hachmann, Wiebke
last_name: Hachmann
- first_name: Philipp
full_name: Krieger, Philipp
last_name: Krieger
- first_name: Johannes
full_name: Brikmann, Johannes
last_name: Brikmann
- first_name: Claudia
full_name: Schmidt, Claudia
id: '466'
last_name: Schmidt
orcid: 0000-0003-3179-9997
- first_name: Elmar
full_name: Moritzer, Elmar
id: '20531'
last_name: Moritzer
- first_name: Bruno
full_name: Hüsgen, Bruno
last_name: Hüsgen
citation:
ama: Wortmann M, Viertel K, Welle A, et al. Anomalous bulk diffusion of methylene
diphenyl diisocyanate in silicone elastomer. International Journal of Heat
and Mass Transfer. 2021;177. doi:10.1016/j.ijheatmasstransfer.2021.121536
apa: Wortmann, M., Viertel, K., Welle, A., Keil, W., Frese, N., Hachmann, W., Krieger,
P., Brikmann, J., Schmidt, C., Moritzer, E., & Hüsgen, B. (2021). Anomalous
bulk diffusion of methylene diphenyl diisocyanate in silicone elastomer. International
Journal of Heat and Mass Transfer, 177, Article 121536. https://doi.org/10.1016/j.ijheatmasstransfer.2021.121536
bibtex: '@article{Wortmann_Viertel_Welle_Keil_Frese_Hachmann_Krieger_Brikmann_Schmidt_Moritzer_et
al._2021, title={Anomalous bulk diffusion of methylene diphenyl diisocyanate in
silicone elastomer}, volume={177}, DOI={10.1016/j.ijheatmasstransfer.2021.121536},
number={121536}, journal={International Journal of Heat and Mass Transfer}, publisher={Elsevier
BV}, author={Wortmann, Martin and Viertel, Klaus and Welle, Alexander and Keil,
Waldemar and Frese, Natalie and Hachmann, Wiebke and Krieger, Philipp and Brikmann,
Johannes and Schmidt, Claudia and Moritzer, Elmar and et al.}, year={2021} }'
chicago: Wortmann, Martin, Klaus Viertel, Alexander Welle, Waldemar Keil, Natalie
Frese, Wiebke Hachmann, Philipp Krieger, et al. “Anomalous Bulk Diffusion of Methylene
Diphenyl Diisocyanate in Silicone Elastomer.” International Journal of Heat
and Mass Transfer 177 (2021). https://doi.org/10.1016/j.ijheatmasstransfer.2021.121536.
ieee: 'M. Wortmann et al., “Anomalous bulk diffusion of methylene diphenyl
diisocyanate in silicone elastomer,” International Journal of Heat and Mass
Transfer, vol. 177, Art. no. 121536, 2021, doi: 10.1016/j.ijheatmasstransfer.2021.121536.'
mla: Wortmann, Martin, et al. “Anomalous Bulk Diffusion of Methylene Diphenyl Diisocyanate
in Silicone Elastomer.” International Journal of Heat and Mass Transfer,
vol. 177, 121536, Elsevier BV, 2021, doi:10.1016/j.ijheatmasstransfer.2021.121536.
short: M. Wortmann, K. Viertel, A. Welle, W. Keil, N. Frese, W. Hachmann, P. Krieger,
J. Brikmann, C. Schmidt, E. Moritzer, B. Hüsgen, International Journal of Heat
and Mass Transfer 177 (2021).
date_created: 2023-01-06T12:20:46Z
date_updated: 2023-01-07T10:25:55Z
department:
- _id: '2'
- _id: '9'
- _id: '315'
doi: 10.1016/j.ijheatmasstransfer.2021.121536
intvolume: ' 177'
keyword:
- Fluid Flow and Transfer Processes
- Mechanical Engineering
- Condensed Matter Physics
language:
- iso: eng
publication: International Journal of Heat and Mass Transfer
publication_identifier:
issn:
- 0017-9310
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: Anomalous bulk diffusion of methylene diphenyl diisocyanate in silicone elastomer
type: journal_article
user_id: '466'
volume: 177
year: '2021'
...
---
_id: '34227'
abstract:
- lang: eng
text: In order to reduce the fuel consumption and consequently the greenhouse emissions,
the automotive industry is implementing lightweight constructions in the body
in white production. As a result, the use of aluminum alloys is continuously increasing.
Due to poor weldability of aluminum in combination with other materials, mechanical
joining technologies like clinching are increasingly used. In order to predict
relevant characteristics of clinched joints and to ensure the reliability of the
process, it is simulated numerically during product development processes. In
this regard the predictive accuracy of the simulated process highly depends on
the implemented friction model. In particular, the frictional behavior between
the sheet metals affects the geometrical formation of the clinched joint significantly.
This paper presents a testing method, which enables to determine the frictional
coefficients between sheet metal materials for the simulation of clinching processes.
For this purpose, the correlation of interface pressure and the relative velocity
between aluminum sheets in clinching processes is investigated using numerical
simulation. Furthermore, the developed testing method focuses on the specimen
geometry as well as the reproduction of the occurring friction conditions between
two sheet metal materials in clinching processes. Based on a methodical approach
the test setup is explained and the functionality of the method is proven by experimental
tests using sheet metal material EN AW6014.
author:
- first_name: Moritz Sebastian
full_name: Rossel, Moritz Sebastian
id: '44503'
last_name: Rossel
- first_name: Max
full_name: Böhnke, Max
id: '45779'
last_name: Böhnke
- first_name: Christian Roman
full_name: Bielak, Christian Roman
id: '34782'
last_name: Bielak
- first_name: Mathias
full_name: Bobbert, Mathias
id: '7850'
last_name: Bobbert
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: Rossel MS, Böhnke M, Bielak CR, Bobbert M, Meschut G. Development of a Method
for the Identification of Friction Coefficients in Sheet Metal Materials for the
Numerical Simulation of Clinching Processes. Key Engineering Materials.
2021;883:81-88. doi:10.4028/www.scientific.net/kem.883.81
apa: Rossel, M. S., Böhnke, M., Bielak, C. R., Bobbert, M., & Meschut, G. (2021).
Development of a Method for the Identification of Friction Coefficients in Sheet
Metal Materials for the Numerical Simulation of Clinching Processes. Key Engineering
Materials, 883, 81–88. https://doi.org/10.4028/www.scientific.net/kem.883.81
bibtex: '@article{Rossel_Böhnke_Bielak_Bobbert_Meschut_2021, title={Development
of a Method for the Identification of Friction Coefficients in Sheet Metal Materials
for the Numerical Simulation of Clinching Processes}, volume={883}, DOI={10.4028/www.scientific.net/kem.883.81},
journal={Key Engineering Materials}, publisher={Trans Tech Publications, Ltd.},
author={Rossel, Moritz Sebastian and Böhnke, Max and Bielak, Christian Roman and
Bobbert, Mathias and Meschut, Gerson}, year={2021}, pages={81–88} }'
chicago: 'Rossel, Moritz Sebastian, Max Böhnke, Christian Roman Bielak, Mathias
Bobbert, and Gerson Meschut. “Development of a Method for the Identification of
Friction Coefficients in Sheet Metal Materials for the Numerical Simulation of
Clinching Processes.” Key Engineering Materials 883 (2021): 81–88. https://doi.org/10.4028/www.scientific.net/kem.883.81.'
ieee: 'M. S. Rossel, M. Böhnke, C. R. Bielak, M. Bobbert, and G. Meschut, “Development
of a Method for the Identification of Friction Coefficients in Sheet Metal Materials
for the Numerical Simulation of Clinching Processes,” Key Engineering Materials,
vol. 883, pp. 81–88, 2021, doi: 10.4028/www.scientific.net/kem.883.81.'
mla: Rossel, Moritz Sebastian, et al. “Development of a Method for the Identification
of Friction Coefficients in Sheet Metal Materials for the Numerical Simulation
of Clinching Processes.” Key Engineering Materials, vol. 883, Trans Tech
Publications, Ltd., 2021, pp. 81–88, doi:10.4028/www.scientific.net/kem.883.81.
short: M.S. Rossel, M. Böhnke, C.R. Bielak, M. Bobbert, G. Meschut, Key Engineering
Materials 883 (2021) 81–88.
date_created: 2022-12-05T21:57:07Z
date_updated: 2023-03-09T11:43:31Z
department:
- _id: '630'
- _id: '157'
doi: 10.4028/www.scientific.net/kem.883.81
intvolume: ' 883'
keyword:
- Mechanical Engineering
- Mechanics of Materials
- General Materials Science
language:
- iso: eng
page: 81-88
project:
- _id: '130'
grant_number: '418701707'
name: 'TRR 285: TRR 285'
- _id: '131'
name: 'TRR 285 - A: TRR 285 - Project Area A'
- _id: '135'
name: 'TRR 285 – A01: TRR 285 - Subproject A01'
publication: Key Engineering Materials
publication_identifier:
issn:
- 1662-9795
publication_status: published
publisher: Trans Tech Publications, Ltd.
quality_controlled: '1'
status: public
title: Development of a Method for the Identification of Friction Coefficients in
Sheet Metal Materials for the Numerical Simulation of Clinching Processes
type: journal_article
user_id: '7850'
volume: 883
year: '2021'
...
---
_id: '30675'
abstract:
- lang: eng
text: In many areas of product manufacturing constructions consist of individual
components and metal sheets that are joined together to form complex structures.
A simple and industrial common method for joining dissimilar and coated materials
is clinching. During the joining process and due to the service load cracks can
occur in the area of the joint, propagate due to cyclic loading and consequently
lead to structural failure. For the prevention of these damage cases, first of
all knowledge about the fracture mechanical material parameters regarding the
original material state of the sheet metals used within the clinching process
are essential.Within the scope of this paper experimental and numerical preliminary
investigations regarding the fracture mechanical behavior of sheet metals used
within the clinching process are presented. Due to the low thickness of 1.5 mm
of the material sheets, the development of a new specimen is necessary to determine
the crack growth rate curve including the fracture mechanical parameters like
the threshold against crack growth ΔKI,th and the fracture
toughness KIC of the base material HCT590X. For the experimental
determination of the crack growth rate curve the numerical calculation of the
geometry factor function as well as the calibration function of this special specimen
are essential. After the experimental validation of the numerically determined
calibration function, crack growth rate curves are determined for the stress ratios
R = 0.1 and R = 0.3 to examine
the mean stress sensitivity. In addition, the different rolling directions of
0° and 90° in relation to the initial crack are taken into account in order to
investigate the influence of the anisotropy due to rolling.
author:
- first_name: Deborah
full_name: Weiß, Deborah
id: '45673'
last_name: Weiß
- first_name: Britta
full_name: Schramm, Britta
id: '4668'
last_name: Schramm
- first_name: Gunter
full_name: Kullmer, Gunter
id: '291'
last_name: Kullmer
citation:
ama: 'Weiß D, Schramm B, Kullmer G. Numerical and Experimental Fracture Mechanical
Investigations of Clinchable Sheet Metals Made of HCT590X. In: Key Engineering
Materials. Vol 883. Trans Tech Publications, Ltd.; 2021:127-132. doi:10.4028/www.scientific.net/kem.883.127'
apa: Weiß, D., Schramm, B., & Kullmer, G. (2021). Numerical and Experimental
Fracture Mechanical Investigations of Clinchable Sheet Metals Made of HCT590X.
Key Engineering Materials, 883, 127–132. https://doi.org/10.4028/www.scientific.net/kem.883.127
bibtex: '@inproceedings{Weiß_Schramm_Kullmer_2021, title={Numerical and Experimental
Fracture Mechanical Investigations of Clinchable Sheet Metals Made of HCT590X},
volume={883}, DOI={10.4028/www.scientific.net/kem.883.127},
booktitle={Key Engineering Materials}, publisher={Trans Tech Publications, Ltd.},
author={Weiß, Deborah and Schramm, Britta and Kullmer, Gunter}, year={2021}, pages={127–132}
}'
chicago: Weiß, Deborah, Britta Schramm, and Gunter Kullmer. “Numerical and Experimental
Fracture Mechanical Investigations of Clinchable Sheet Metals Made of HCT590X.”
In Key Engineering Materials, 883:127–32. Trans Tech Publications, Ltd.,
2021. https://doi.org/10.4028/www.scientific.net/kem.883.127.
ieee: 'D. Weiß, B. Schramm, and G. Kullmer, “Numerical and Experimental Fracture
Mechanical Investigations of Clinchable Sheet Metals Made of HCT590X,” in Key
Engineering Materials, online, 2021, vol. 883, pp. 127–132, doi: 10.4028/www.scientific.net/kem.883.127.'
mla: Weiß, Deborah, et al. “Numerical and Experimental Fracture Mechanical Investigations
of Clinchable Sheet Metals Made of HCT590X.” Key Engineering Materials,
vol. 883, Trans Tech Publications, Ltd., 2021, pp. 127–32, doi:10.4028/www.scientific.net/kem.883.127.
short: 'D. Weiß, B. Schramm, G. Kullmer, in: Key Engineering Materials, Trans Tech
Publications, Ltd., 2021, pp. 127–132.'
conference:
end_date: 2021-03-31
location: online
name: 19th International Conference on Sheet Metal
start_date: 2021-03-29
date_created: 2022-03-29T08:09:01Z
date_updated: 2023-04-27T10:13:19Z
department:
- _id: '143'
doi: 10.4028/www.scientific.net/kem.883.127
intvolume: ' 883'
keyword:
- Mechanical Engineering
- Mechanics of Materials
- General Materials Science
language:
- iso: eng
page: 127-132
publication: Key Engineering Materials
publication_identifier:
issn:
- 1662-9795
publication_status: published
publisher: Trans Tech Publications, Ltd.
quality_controlled: '1'
status: public
title: Numerical and Experimental Fracture Mechanical Investigations of Clinchable
Sheet Metals Made of HCT590X
type: conference
user_id: '45673'
volume: 883
year: '2021'
...
---
_id: '30674'
abstract:
- lang: eng
text: AbstractIn addition to the classical strength
calculation, it is important to design components with regard to fracture mechanics
because defects and cracks in a component can drastically influence its strength
or fatigue behavior. Cracks can propagate due to operational loads and consequently
lead to component failure. The fracture mechanical analysis provides information
on stable or unstable crack growth as well as about the direction and the growth
rate of a crack. For this purpose, sufficient information has to be available
about the crack location, the crack length, the component geometry, the component
loading and the fracture mechanical material parameters. The fracture mechanical
properties are determined experimentally with standardized specimens as defined
by the guidelines of the American Society for Testing and Materials. In practice,
however, especially in the context with damage cases or formed material fracture
mechanical parameters directly for a component are of interest. However, standard
specimens often cannot be extracted at all due to the complexity of the component
geometry. Therefore, the development of special specimens is required whereby
certain arrangements have to be made in advance. These arrangements are presented
in the present paper in order to contribute to a holistic investigation chain
for the experimental determination of fracture mechanical material parameters
with special specimens.
author:
- first_name: Deborah
full_name: Weiß, Deborah
id: '45673'
last_name: Weiß
- first_name: Britta
full_name: Schramm, Britta
id: '4668'
last_name: Schramm
- first_name: Gunter
full_name: Kullmer, Gunter
id: '291'
last_name: Kullmer
citation:
ama: Weiß D, Schramm B, Kullmer G. Holistic investigation chain for the experimental
determination of fracture mechanical material parameters with special specimens.
Production Engineering. Published online 2021. doi:10.1007/s11740-021-01096-6
apa: Weiß, D., Schramm, B., & Kullmer, G. (2021). Holistic investigation chain
for the experimental determination of fracture mechanical material parameters
with special specimens. Production Engineering. https://doi.org/10.1007/s11740-021-01096-6
bibtex: '@article{Weiß_Schramm_Kullmer_2021, title={Holistic investigation chain
for the experimental determination of fracture mechanical material parameters
with special specimens}, DOI={10.1007/s11740-021-01096-6},
journal={Production Engineering}, publisher={Springer Science and Business Media
LLC}, author={Weiß, Deborah and Schramm, Britta and Kullmer, Gunter}, year={2021}
}'
chicago: Weiß, Deborah, Britta Schramm, and Gunter Kullmer. “Holistic Investigation
Chain for the Experimental Determination of Fracture Mechanical Material Parameters
with Special Specimens.” Production Engineering, 2021. https://doi.org/10.1007/s11740-021-01096-6.
ieee: 'D. Weiß, B. Schramm, and G. Kullmer, “Holistic investigation chain for the
experimental determination of fracture mechanical material parameters with special
specimens,” Production Engineering, 2021, doi: 10.1007/s11740-021-01096-6.'
mla: Weiß, Deborah, et al. “Holistic Investigation Chain for the Experimental Determination
of Fracture Mechanical Material Parameters with Special Specimens.” Production
Engineering, Springer Science and Business Media LLC, 2021, doi:10.1007/s11740-021-01096-6.
short: D. Weiß, B. Schramm, G. Kullmer, Production Engineering (2021).
date_created: 2022-03-29T08:05:02Z
date_updated: 2023-04-27T10:14:53Z
department:
- _id: '143'
doi: 10.1007/s11740-021-01096-6
keyword:
- Industrial and Manufacturing Engineering
- Mechanical Engineering
language:
- iso: eng
publication: Production Engineering
publication_identifier:
issn:
- 0944-6524
- 1863-7353
publication_status: published
publisher: Springer Science and Business Media LLC
quality_controlled: '1'
status: public
title: Holistic investigation chain for the experimental determination of fracture
mechanical material parameters with special specimens
type: journal_article
user_id: '45673'
year: '2021'
...
---
_id: '40434'
article_number: '2100518'
author:
- first_name: Philip
full_name: Klement, Philip
last_name: Klement
- first_name: Natalie
full_name: Dehnhardt, Natalie
last_name: Dehnhardt
- first_name: Chuan-Ding
full_name: Dong, Chuan-Ding
id: '67188'
last_name: Dong
- first_name: Florian
full_name: Dobener, Florian
last_name: Dobener
- first_name: Samuel
full_name: Bayliff, Samuel
last_name: Bayliff
- first_name: Julius
full_name: Winkler, Julius
last_name: Winkler
- first_name: Detlev M.
full_name: Hofmann, Detlev M.
last_name: Hofmann
- first_name: Peter J.
full_name: Klar, Peter J.
last_name: Klar
- first_name: Stefan
full_name: Schumacher, Stefan
id: '27271'
last_name: Schumacher
orcid: 0000-0003-4042-4951
- first_name: Sangam
full_name: Chatterjee, Sangam
last_name: Chatterjee
- first_name: Johanna
full_name: Heine, Johanna
last_name: Heine
citation:
ama: Klement P, Dehnhardt N, Dong C-D, et al. Atomically Thin Sheets of Lead‐Free
1D Hybrid Perovskites Feature Tunable White‐Light Emission from Self‐Trapped Excitons.
Advanced Materials. 2021;33(23). doi:10.1002/adma.202100518
apa: Klement, P., Dehnhardt, N., Dong, C.-D., Dobener, F., Bayliff, S., Winkler,
J., Hofmann, D. M., Klar, P. J., Schumacher, S., Chatterjee, S., & Heine,
J. (2021). Atomically Thin Sheets of Lead‐Free 1D Hybrid Perovskites Feature Tunable
White‐Light Emission from Self‐Trapped Excitons. Advanced Materials, 33(23),
Article 2100518. https://doi.org/10.1002/adma.202100518
bibtex: '@article{Klement_Dehnhardt_Dong_Dobener_Bayliff_Winkler_Hofmann_Klar_Schumacher_Chatterjee_et
al._2021, title={Atomically Thin Sheets of Lead‐Free 1D Hybrid Perovskites Feature
Tunable White‐Light Emission from Self‐Trapped Excitons}, volume={33}, DOI={10.1002/adma.202100518}, number={232100518},
journal={Advanced Materials}, publisher={Wiley}, author={Klement, Philip and Dehnhardt,
Natalie and Dong, Chuan-Ding and Dobener, Florian and Bayliff, Samuel and Winkler,
Julius and Hofmann, Detlev M. and Klar, Peter J. and Schumacher, Stefan and Chatterjee,
Sangam and et al.}, year={2021} }'
chicago: Klement, Philip, Natalie Dehnhardt, Chuan-Ding Dong, Florian Dobener, Samuel
Bayliff, Julius Winkler, Detlev M. Hofmann, et al. “Atomically Thin Sheets of
Lead‐Free 1D Hybrid Perovskites Feature Tunable White‐Light Emission from Self‐Trapped
Excitons.” Advanced Materials 33, no. 23 (2021). https://doi.org/10.1002/adma.202100518.
ieee: 'P. Klement et al., “Atomically Thin Sheets of Lead‐Free 1D Hybrid
Perovskites Feature Tunable White‐Light Emission from Self‐Trapped Excitons,”
Advanced Materials, vol. 33, no. 23, Art. no. 2100518, 2021, doi: 10.1002/adma.202100518.'
mla: Klement, Philip, et al. “Atomically Thin Sheets of Lead‐Free 1D Hybrid Perovskites
Feature Tunable White‐Light Emission from Self‐Trapped Excitons.” Advanced
Materials, vol. 33, no. 23, 2100518, Wiley, 2021, doi:10.1002/adma.202100518.
short: P. Klement, N. Dehnhardt, C.-D. Dong, F. Dobener, S. Bayliff, J. Winkler,
D.M. Hofmann, P.J. Klar, S. Schumacher, S. Chatterjee, J. Heine, Advanced Materials
33 (2021).
date_created: 2023-01-26T15:51:03Z
date_updated: 2023-04-20T15:33:14Z
department:
- _id: '15'
- _id: '170'
- _id: '297'
- _id: '230'
- _id: '35'
doi: 10.1002/adma.202100518
intvolume: ' 33'
issue: '23'
keyword:
- Mechanical Engineering
- Mechanics of Materials
- General Materials Science
language:
- iso: eng
project:
- _id: '52'
name: 'PC2: Computing Resources Provided by the Paderborn Center for Parallel Computing'
publication: Advanced Materials
publication_identifier:
issn:
- 0935-9648
- 1521-4095
publication_status: published
publisher: Wiley
status: public
title: Atomically Thin Sheets of Lead‐Free 1D Hybrid Perovskites Feature Tunable White‐Light
Emission from Self‐Trapped Excitons
type: journal_article
user_id: '16199'
volume: 33
year: '2021'
...
---
_id: '34226'
abstract:
- lang: eng
text: The increasing use of multi-material constructions lead to a continuous increase
in the use of mechanical joining techniques due to the wide range of joining possibilities
as well as the high load-bearing capacities of the joints. Nevertheless, the currently
rigid tool systems are not able to react to changing boundary conditions, like
changing the material-geometry-combination. Therefore research work is crucial
with regard to versatile joining systems. In this paper, a new approach for a
versatile self-piercing riveting process considering the joining system as well
as the auxiliary joining part is presented.
author:
- first_name: Fabian
full_name: Kappe, Fabian
id: '66459'
last_name: Kappe
- first_name: Mathias
full_name: Bobbert, Mathias
id: '7850'
last_name: Bobbert
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: 'Kappe F, Bobbert M, Meschut G. New Approach for Versatile Self Piercing Riveting:
Joining System and Auxiliary Part. Key Engineering Materials. 2021;883:3-10.
doi:10.4028/www.scientific.net/kem.883.3'
apa: 'Kappe, F., Bobbert, M., & Meschut, G. (2021). New Approach for Versatile
Self Piercing Riveting: Joining System and Auxiliary Part. Key Engineering
Materials, 883, 3–10. https://doi.org/10.4028/www.scientific.net/kem.883.3'
bibtex: '@article{Kappe_Bobbert_Meschut_2021, title={New Approach for Versatile
Self Piercing Riveting: Joining System and Auxiliary Part}, volume={883}, DOI={10.4028/www.scientific.net/kem.883.3},
journal={Key Engineering Materials}, publisher={Trans Tech Publications, Ltd.},
author={Kappe, Fabian and Bobbert, Mathias and Meschut, Gerson}, year={2021},
pages={3–10} }'
chicago: 'Kappe, Fabian, Mathias Bobbert, and Gerson Meschut. “New Approach for
Versatile Self Piercing Riveting: Joining System and Auxiliary Part.” Key Engineering
Materials 883 (2021): 3–10. https://doi.org/10.4028/www.scientific.net/kem.883.3.'
ieee: 'F. Kappe, M. Bobbert, and G. Meschut, “New Approach for Versatile Self Piercing
Riveting: Joining System and Auxiliary Part,” Key Engineering Materials,
vol. 883, pp. 3–10, 2021, doi: 10.4028/www.scientific.net/kem.883.3.'
mla: 'Kappe, Fabian, et al. “New Approach for Versatile Self Piercing Riveting:
Joining System and Auxiliary Part.” Key Engineering Materials, vol. 883,
Trans Tech Publications, Ltd., 2021, pp. 3–10, doi:10.4028/www.scientific.net/kem.883.3.'
short: F. Kappe, M. Bobbert, G. Meschut, Key Engineering Materials 883 (2021) 3–10.
date_created: 2022-12-05T21:54:38Z
date_updated: 2023-04-27T08:52:59Z
department:
- _id: '630'
- _id: '157'
doi: 10.4028/www.scientific.net/kem.883.3
intvolume: ' 883'
keyword:
- Mechanical Engineering
- Mechanics of Materials
- General Materials Science
language:
- iso: eng
page: 3-10
project:
- _id: '130'
grant_number: '418701707'
name: 'TRR 285: TRR 285'
- _id: '133'
name: 'TRR 285 - C: TRR 285 - Project Area C'
- _id: '146'
name: 'TRR 285 – C02: TRR 285 - Subproject C02'
publication: Key Engineering Materials
publication_identifier:
issn:
- 1662-9795
publication_status: published
publisher: Trans Tech Publications, Ltd.
quality_controlled: '1'
status: public
title: 'New Approach for Versatile Self Piercing Riveting: Joining System and Auxiliary
Part'
type: journal_article
user_id: '66459'
volume: 883
year: '2021'
...
---
_id: '41511'
author:
- first_name: Maxwell
full_name: Hein, Maxwell
id: '52771'
last_name: Hein
orcid: 0000-0002-3732-2236
- first_name: Kay-Peter
full_name: Hoyer, Kay-Peter
id: '48411'
last_name: Hoyer
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
citation:
ama: Hein M, Hoyer K-P, Schaper M. Additively processed TiAl6Nb7 alloy for biomedical
applications. Materialwissenschaft und Werkstofftechnik. 2021;52(7):703-716.
doi:10.1002/mawe.202000288
apa: Hein, M., Hoyer, K.-P., & Schaper, M. (2021). Additively processed TiAl6Nb7
alloy for biomedical applications. Materialwissenschaft Und Werkstofftechnik,
52(7), 703–716. https://doi.org/10.1002/mawe.202000288
bibtex: '@article{Hein_Hoyer_Schaper_2021, title={Additively processed TiAl6Nb7
alloy for biomedical applications}, volume={52}, DOI={10.1002/mawe.202000288},
number={7}, journal={Materialwissenschaft und Werkstofftechnik}, publisher={Wiley},
author={Hein, Maxwell and Hoyer, Kay-Peter and Schaper, Mirko}, year={2021}, pages={703–716}
}'
chicago: 'Hein, Maxwell, Kay-Peter Hoyer, and Mirko Schaper. “Additively Processed
TiAl6Nb7 Alloy for Biomedical Applications.” Materialwissenschaft Und Werkstofftechnik
52, no. 7 (2021): 703–16. https://doi.org/10.1002/mawe.202000288.'
ieee: 'M. Hein, K.-P. Hoyer, and M. Schaper, “Additively processed TiAl6Nb7 alloy
for biomedical applications,” Materialwissenschaft und Werkstofftechnik,
vol. 52, no. 7, pp. 703–716, 2021, doi: 10.1002/mawe.202000288.'
mla: Hein, Maxwell, et al. “Additively Processed TiAl6Nb7 Alloy for Biomedical Applications.”
Materialwissenschaft Und Werkstofftechnik, vol. 52, no. 7, Wiley, 2021,
pp. 703–16, doi:10.1002/mawe.202000288.
short: M. Hein, K.-P. Hoyer, M. Schaper, Materialwissenschaft Und Werkstofftechnik
52 (2021) 703–716.
date_created: 2023-02-02T14:33:23Z
date_updated: 2023-06-01T14:33:34Z
department:
- _id: '9'
- _id: '158'
doi: 10.1002/mawe.202000288
intvolume: ' 52'
issue: '7'
keyword:
- Mechanical Engineering
- Mechanics of Materials
- Condensed Matter Physics
- General Materials Science
language:
- iso: eng
page: 703-716
publication: Materialwissenschaft und Werkstofftechnik
publication_identifier:
issn:
- 0933-5137
- 1521-4052
publication_status: published
publisher: Wiley
quality_controlled: '1'
status: public
title: Additively processed TiAl6Nb7 alloy for biomedical applications
type: journal_article
user_id: '43720'
volume: 52
year: '2021'
...
---
_id: '41507'
abstract:
- lang: eng
text: "\r\nPurpose\r\nThe
currently existing restrictions regarding the deployment of additively manufactured
components because of poor surface roughness, porosity and residual stresses as
well as their influence on the low-cycle fatigue (LCF) strength are addressed
in this paper.\r\n\r\n\r\nDesign/methodology/approach\r\nThis
study aims to evaluating the effect of different pre- and post-treatments on the
LCF strength of additively manufactured 316L parts. Therefore, 316L specimens
manufactured by laser powder bed fusion were examined in their as-built state
as well as after grinding, or coating with regard to the surface roughness, residual
stresses and LCF strength. To differentiate between topographical effects and
residual stress-related phenomena, stress-relieved 316L specimens served as a
reference throughout the investigations. To enable an alumina coating of the 316L
components, atmospheric plasma spraying was used, and the near-surface residual
stresses and the surface roughness are measured and investigated.\r\n\r\n\r\nFindings\r\nThe results
have shown that the applied pre- and post-treatments such as stress-relief heat
treatment, grinding and alumina coating have each led to an increase in LCF strength
of the 316L specimens. In contrast, the non-heat-treated specimens predominantly
exhibited coating delamination.\r\n\r\n\r\nOriginality/value\r\nTo
the best of the authors’ knowledge, this is the first study of the correlation
between the LCF behavior of additively manufactured uncoated 316L specimens in
comparison with additively manufactured 316L specimens with an alumina coating.\r\n"
author:
- first_name: Kai-Uwe
full_name: Garthe, Kai-Uwe
id: '11199'
last_name: Garthe
orcid: 0000-0003-0741-3812
- first_name: Kay-Peter
full_name: Hoyer, Kay-Peter
id: '48411'
last_name: Hoyer
- first_name: Leif
full_name: Hagen, Leif
last_name: Hagen
- first_name: Wolfgang
full_name: Tillmann, Wolfgang
last_name: Tillmann
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
citation:
ama: Garthe K-U, Hoyer K-P, Hagen L, Tillmann W, Schaper M. Correlation between
pre- and post-treatments of additively manufactured 316L parts and the resulting
low cycle fatigue behavior. Rapid Prototyping Journal. 2021;28(5):833-840.
doi:10.1108/rpj-01-2021-0017
apa: Garthe, K.-U., Hoyer, K.-P., Hagen, L., Tillmann, W., & Schaper, M. (2021).
Correlation between pre- and post-treatments of additively manufactured 316L parts
and the resulting low cycle fatigue behavior. Rapid Prototyping Journal,
28(5), 833–840. https://doi.org/10.1108/rpj-01-2021-0017
bibtex: '@article{Garthe_Hoyer_Hagen_Tillmann_Schaper_2021, title={Correlation between
pre- and post-treatments of additively manufactured 316L parts and the resulting
low cycle fatigue behavior}, volume={28}, DOI={10.1108/rpj-01-2021-0017},
number={5}, journal={Rapid Prototyping Journal}, publisher={Emerald}, author={Garthe,
Kai-Uwe and Hoyer, Kay-Peter and Hagen, Leif and Tillmann, Wolfgang and Schaper,
Mirko}, year={2021}, pages={833–840} }'
chicago: 'Garthe, Kai-Uwe, Kay-Peter Hoyer, Leif Hagen, Wolfgang Tillmann, and Mirko
Schaper. “Correlation between Pre- and Post-Treatments of Additively Manufactured
316L Parts and the Resulting Low Cycle Fatigue Behavior.” Rapid Prototyping
Journal 28, no. 5 (2021): 833–40. https://doi.org/10.1108/rpj-01-2021-0017.'
ieee: 'K.-U. Garthe, K.-P. Hoyer, L. Hagen, W. Tillmann, and M. Schaper, “Correlation
between pre- and post-treatments of additively manufactured 316L parts and the
resulting low cycle fatigue behavior,” Rapid Prototyping Journal, vol.
28, no. 5, pp. 833–840, 2021, doi: 10.1108/rpj-01-2021-0017.'
mla: Garthe, Kai-Uwe, et al. “Correlation between Pre- and Post-Treatments of Additively
Manufactured 316L Parts and the Resulting Low Cycle Fatigue Behavior.” Rapid
Prototyping Journal, vol. 28, no. 5, Emerald, 2021, pp. 833–40, doi:10.1108/rpj-01-2021-0017.
short: K.-U. Garthe, K.-P. Hoyer, L. Hagen, W. Tillmann, M. Schaper, Rapid Prototyping
Journal 28 (2021) 833–840.
date_created: 2023-02-02T14:31:35Z
date_updated: 2023-06-01T14:35:00Z
department:
- _id: '9'
- _id: '158'
doi: 10.1108/rpj-01-2021-0017
intvolume: ' 28'
issue: '5'
keyword:
- Industrial and Manufacturing Engineering
- Mechanical Engineering
language:
- iso: eng
page: 833-840
publication: Rapid Prototyping Journal
publication_identifier:
issn:
- 1355-2546
- 1355-2546
publication_status: published
publisher: Emerald
quality_controlled: '1'
status: public
title: Correlation between pre- and post-treatments of additively manufactured 316L
parts and the resulting low cycle fatigue behavior
type: journal_article
user_id: '43720'
volume: 28
year: '2021'
...
---
_id: '41512'
article_number: '141662'
author:
- first_name: Anatolii
full_name: Andreiev, Anatolii
id: '50215'
last_name: Andreiev
- first_name: Kay-Peter
full_name: Hoyer, Kay-Peter
id: '48411'
last_name: Hoyer
- first_name: Dimitri
full_name: Dula, Dimitri
last_name: Dula
- first_name: Florian
full_name: Hengsbach, Florian
last_name: Hengsbach
- first_name: Olexandr
full_name: Grydin, Olexandr
id: '43822'
last_name: Grydin
- first_name: Yaroslav
full_name: Frolov, Yaroslav
last_name: Frolov
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
citation:
ama: 'Andreiev A, Hoyer K-P, Dula D, et al. Laser beam melting of functionally graded
materials with application-adapted tailoring of magnetic and mechanical performance.
Materials Science and Engineering: A. 2021;822. doi:10.1016/j.msea.2021.141662'
apa: 'Andreiev, A., Hoyer, K.-P., Dula, D., Hengsbach, F., Grydin, O., Frolov, Y.,
& Schaper, M. (2021). Laser beam melting of functionally graded materials
with application-adapted tailoring of magnetic and mechanical performance. Materials
Science and Engineering: A, 822, Article 141662. https://doi.org/10.1016/j.msea.2021.141662'
bibtex: '@article{Andreiev_Hoyer_Dula_Hengsbach_Grydin_Frolov_Schaper_2021, title={Laser
beam melting of functionally graded materials with application-adapted tailoring
of magnetic and mechanical performance}, volume={822}, DOI={10.1016/j.msea.2021.141662},
number={141662}, journal={Materials Science and Engineering: A}, publisher={Elsevier
BV}, author={Andreiev, Anatolii and Hoyer, Kay-Peter and Dula, Dimitri and Hengsbach,
Florian and Grydin, Olexandr and Frolov, Yaroslav and Schaper, Mirko}, year={2021}
}'
chicago: 'Andreiev, Anatolii, Kay-Peter Hoyer, Dimitri Dula, Florian Hengsbach,
Olexandr Grydin, Yaroslav Frolov, and Mirko Schaper. “Laser Beam Melting of Functionally
Graded Materials with Application-Adapted Tailoring of Magnetic and Mechanical
Performance.” Materials Science and Engineering: A 822 (2021). https://doi.org/10.1016/j.msea.2021.141662.'
ieee: 'A. Andreiev et al., “Laser beam melting of functionally graded materials
with application-adapted tailoring of magnetic and mechanical performance,” Materials
Science and Engineering: A, vol. 822, Art. no. 141662, 2021, doi: 10.1016/j.msea.2021.141662.'
mla: 'Andreiev, Anatolii, et al. “Laser Beam Melting of Functionally Graded Materials
with Application-Adapted Tailoring of Magnetic and Mechanical Performance.” Materials
Science and Engineering: A, vol. 822, 141662, Elsevier BV, 2021, doi:10.1016/j.msea.2021.141662.'
short: 'A. Andreiev, K.-P. Hoyer, D. Dula, F. Hengsbach, O. Grydin, Y. Frolov, M.
Schaper, Materials Science and Engineering: A 822 (2021).'
date_created: 2023-02-02T14:33:52Z
date_updated: 2023-06-01T14:35:26Z
department:
- _id: '9'
- _id: '158'
doi: 10.1016/j.msea.2021.141662
intvolume: ' 822'
keyword:
- Mechanical Engineering
- Mechanics of Materials
- Condensed Matter Physics
- General Materials Science
language:
- iso: eng
publication: 'Materials Science and Engineering: A'
publication_identifier:
issn:
- 0921-5093
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: Laser beam melting of functionally graded materials with application-adapted
tailoring of magnetic and mechanical performance
type: journal_article
user_id: '43720'
volume: 822
year: '2021'
...