--- _id: '34214' abstract: - lang: eng text: This article presents the application and evaluation of a cantilever with integrated sensing and actuation as part of an atomic force microscope (AFM) with an adjustable probe direction, which is integrated into a nano measuring machine (NMM-1). The AFM, which is operated in closed-loop intermittent contact mode, is based on two rotational axes that enable the adjustment of the probe direction to cover a complete hemisphere. The axes greatly enlarge the metrology frame of the measuring system by materials with a comparatively high coefficient of thermal expansion, which ultimately limits the achievable measurement uncertainty of the measuring system. Thus, to reduce the thermal sensitivity of the system, the redesign of the rotational kinematics is mandatory. However, in this article, some preliminary investigations on the application of a self-sensing cantilever with an integrated micro heater for its stimulation will be presented. In previous investigations, a piezoelectric actuator has been applied to stimulate the cantilever. However, the removal of the piezoelectric actuator, which is enabled by the application of a cantilever with an integrated micro heater, promises an essential simplification of the sensor holder. Thus, in the future it might be possible to use materials with a low coefficient of thermal expansion, which are often difficult to machine and therefore only allow for rather simple geometries. Furthermore, because of the creepage of piezoelectric actuators, their removal from the metrology frame might lead to improved metrological characteristics. As will be shown, there are no significant differences between the two modes of actuation. Therefore, the redesigned rotational system will be based on the cantilever with integrated sensing and actuation. author: - first_name: Janik full_name: Schaude, Janik last_name: Schaude - first_name: Tino full_name: Hausotte, Tino last_name: Hausotte citation: ama: Schaude J, Hausotte T. Atomic Force Microscope with an Adjustable Probe Direction and Integrated Sensing and Actuation. Nanomanufacturing and Metrology. 2022;5(2):139-148. doi:10.1007/s41871-022-00143-9 apa: Schaude, J., & Hausotte, T. (2022). Atomic Force Microscope with an Adjustable Probe Direction and Integrated Sensing and Actuation. Nanomanufacturing and Metrology, 5(2), 139–148. https://doi.org/10.1007/s41871-022-00143-9 bibtex: '@article{Schaude_Hausotte_2022, title={Atomic Force Microscope with an Adjustable Probe Direction and Integrated Sensing and Actuation}, volume={5}, DOI={10.1007/s41871-022-00143-9}, number={2}, journal={Nanomanufacturing and Metrology}, publisher={Springer Science and Business Media LLC}, author={Schaude, Janik and Hausotte, Tino}, year={2022}, pages={139–148} }' chicago: 'Schaude, Janik, and Tino Hausotte. “Atomic Force Microscope with an Adjustable Probe Direction and Integrated Sensing and Actuation.” Nanomanufacturing and Metrology 5, no. 2 (2022): 139–48. https://doi.org/10.1007/s41871-022-00143-9.' ieee: 'J. Schaude and T. Hausotte, “Atomic Force Microscope with an Adjustable Probe Direction and Integrated Sensing and Actuation,” Nanomanufacturing and Metrology, vol. 5, no. 2, pp. 139–148, 2022, doi: 10.1007/s41871-022-00143-9.' mla: Schaude, Janik, and Tino Hausotte. “Atomic Force Microscope with an Adjustable Probe Direction and Integrated Sensing and Actuation.” Nanomanufacturing and Metrology, vol. 5, no. 2, Springer Science and Business Media LLC, 2022, pp. 139–48, doi:10.1007/s41871-022-00143-9. short: J. Schaude, T. Hausotte, Nanomanufacturing and Metrology 5 (2022) 139–148. date_created: 2022-12-05T21:15:09Z date_updated: 2023-01-02T11:10:08Z department: - _id: '630' doi: 10.1007/s41871-022-00143-9 intvolume: ' 5' issue: '2' keyword: - Industrial and Manufacturing Engineering - Mechanical Engineering - Materials Science (miscellaneous) language: - iso: eng page: 139-148 project: - _id: '130' grant_number: '418701707' name: 'TRR 285: TRR 285' - _id: '133' name: 'TRR 285 - C: TRR 285 - Project Area C' - _id: '149' name: 'TRR 285 – C05: TRR 285 - Subproject C05' publication: Nanomanufacturing and Metrology publication_identifier: issn: - 2520-811X - 2520-8128 publication_status: published publisher: Springer Science and Business Media LLC status: public title: Atomic Force Microscope with an Adjustable Probe Direction and Integrated Sensing and Actuation type: journal_article user_id: '14931' volume: 5 year: '2022' ... --- _id: '34280' abstract: - lang: eng text: Clinching is a cost efficient method for joining components in series production. To assure the clinch point’s quality, the force displacement curve during clinching or the bottom thickness are monitored. The most significant geometrical characteristics of the clinch point, neck thickness and undercut, are usually tested destructively by microsectioning. However, micrograph preparation goes ahead with a resetting of elastic deformations and crack-closing after unloading. To generate a comprehensive knowledge of the clinch point’s inner geometry under load, in-situ computed tomography (CT) and acoustic testing (TDA) can be combined. While the TDA is highly sensitive to the inner state of the clinch point, it could detect critical events like crack development during loading. If such events are indicated, the loading process is stopped and a stepped in-situ CT of the following crack and deformation development is performed. In this paper, the concept is applied to the process of clinching itself, providing a detailed three-dimensional insight in the development of the joining zone. A test set-up is used which allows a stepwise clinching of two aluminium sheets EN AW 6014. Furthermore, this set-up is positioned within a CT system. In order to minimize X-ray absorption, a beryllium cylinder is used within the set-up frame and clinching tools are made from Si3N4. The actuator and sensor necessary for the TDA are integrated in the set-up. In regular process steps, the clinching process is interrupted in order to perform a TDA and a CT scan. In order to enhance the visibility of the interface, a thin tin layer is positioned between the sheets prior clinching. It is shown, that the test-set up allows a monitoring of the dynamic behaviour of the specimen during clinching while the CT scans visualize the inner geometry and material flow non-destructively. author: - first_name: Daniel full_name: Köhler, Daniel last_name: Köhler - first_name: Richard full_name: Stephan, Richard last_name: Stephan - first_name: Robert full_name: Kupfer, Robert last_name: Kupfer - first_name: Juliane full_name: Troschitz, Juliane last_name: Troschitz - first_name: Alexander full_name: Brosius, Alexander last_name: Brosius - first_name: Maik full_name: Gude, Maik last_name: Gude citation: ama: 'Köhler D, Stephan R, Kupfer R, Troschitz J, Brosius A, Gude M. Investigations on Combined in situ CT and Acoustic Analysis during Clinching. In: Key Engineering Materials. Vol 926. Trans Tech Publications, Ltd.; 2022:1489-1497. doi:10.4028/p-32330d' apa: Köhler, D., Stephan, R., Kupfer, R., Troschitz, J., Brosius, A., & Gude, M. (2022). Investigations on Combined in situ CT and Acoustic Analysis during Clinching. Key Engineering Materials, 926, 1489–1497. https://doi.org/10.4028/p-32330d bibtex: '@inproceedings{Köhler_Stephan_Kupfer_Troschitz_Brosius_Gude_2022, title={Investigations on Combined in situ CT and Acoustic Analysis during Clinching}, volume={926}, DOI={10.4028/p-32330d}, booktitle={Key Engineering Materials}, publisher={Trans Tech Publications, Ltd.}, author={Köhler, Daniel and Stephan, Richard and Kupfer, Robert and Troschitz, Juliane and Brosius, Alexander and Gude, Maik}, year={2022}, pages={1489–1497} }' chicago: Köhler, Daniel, Richard Stephan, Robert Kupfer, Juliane Troschitz, Alexander Brosius, and Maik Gude. “Investigations on Combined in Situ CT and Acoustic Analysis during Clinching.” In Key Engineering Materials, 926:1489–97. Trans Tech Publications, Ltd., 2022. https://doi.org/10.4028/p-32330d. ieee: 'D. Köhler, R. Stephan, R. Kupfer, J. Troschitz, A. Brosius, and M. Gude, “Investigations on Combined in situ CT and Acoustic Analysis during Clinching,” in Key Engineering Materials, 2022, vol. 926, pp. 1489–1497, doi: 10.4028/p-32330d.' mla: Köhler, Daniel, et al. “Investigations on Combined in Situ CT and Acoustic Analysis during Clinching.” Key Engineering Materials, vol. 926, Trans Tech Publications, Ltd., 2022, pp. 1489–97, doi:10.4028/p-32330d. short: 'D. Köhler, R. Stephan, R. Kupfer, J. Troschitz, A. Brosius, M. Gude, in: Key Engineering Materials, Trans Tech Publications, Ltd., 2022, pp. 1489–1497.' date_created: 2022-12-07T16:38:44Z date_updated: 2023-01-02T11:13:59Z department: - _id: '630' doi: 10.4028/p-32330d intvolume: ' 926' keyword: - Mechanical Engineering - Mechanics of Materials - General Materials Science language: - iso: eng page: 1489-1497 project: - _id: '130' grant_number: '418701707' name: 'TRR 285: TRR 285' - _id: '133' name: 'TRR 285 - C: TRR 285 - Project Area C' - _id: '148' name: 'TRR 285 – C04: TRR 285 - Subproject C04' publication: Key Engineering Materials publication_identifier: issn: - 1662-9795 publication_status: published publisher: Trans Tech Publications, Ltd. status: public title: Investigations on Combined in situ CT and Acoustic Analysis during Clinching type: conference user_id: '14931' volume: 926 year: '2022' ... --- _id: '34414' abstract: - lang: eng text: Given a steadily increasing demand on multi-material lightweight designs, fast and cost-efficient production technologies, such as the mechanical joining process clinching, are becoming more and more relevant for series production. Since the application of such joining techniques often base on the ability to reach similar or even better joint loading capacities compared to established joining processes (e.g., spot welding), few contributions investigated the systematic improvement of clinch joint characteristics. In this regard, the use of data-driven methods in combination with optimization algorithms showed already high potentials for the analysis of individual joints and the definition of optimal tool configurations. However, the often missing consideration of uncertainties, such as varying material properties, and the related calculation of their impact on clinch joint properties can lead to poor estimation results and thus to a decreased reliability of the entire joint connection. This can cause major challenges, especially for the design and dimensioning of safety-relevant components, such as in car bodies. Motivated by this, the presented contribution introduces a novel method for the robust estimation of clinch joint characteristics including uncertainties of varying and versatile process chains in mechanical joining. Therefore, the utilization of Gaussian process regression models is demonstrated and evaluated regarding the ability to achieve sufficient prediction qualities. author: - first_name: Christoph full_name: Zirngibl, Christoph last_name: Zirngibl - first_name: Benjamin full_name: Schleich, Benjamin last_name: Schleich - first_name: Sandro full_name: Wartzack, Sandro last_name: Wartzack citation: ama: Zirngibl C, Schleich B, Wartzack S. Robust estimation of clinch joint characteristics based on data-driven methods. The International Journal of Advanced Manufacturing Technology. Published online 2022. doi:10.1007/s00170-022-10441-7 apa: Zirngibl, C., Schleich, B., & Wartzack, S. (2022). Robust estimation of clinch joint characteristics based on data-driven methods. The International Journal of Advanced Manufacturing Technology. https://doi.org/10.1007/s00170-022-10441-7 bibtex: '@article{Zirngibl_Schleich_Wartzack_2022, title={Robust estimation of clinch joint characteristics based on data-driven methods}, DOI={10.1007/s00170-022-10441-7}, journal={The International Journal of Advanced Manufacturing Technology}, publisher={Springer Science and Business Media LLC}, author={Zirngibl, Christoph and Schleich, Benjamin and Wartzack, Sandro}, year={2022} }' chicago: Zirngibl, Christoph, Benjamin Schleich, and Sandro Wartzack. “Robust Estimation of Clinch Joint Characteristics Based on Data-Driven Methods.” The International Journal of Advanced Manufacturing Technology, 2022. https://doi.org/10.1007/s00170-022-10441-7. ieee: 'C. Zirngibl, B. Schleich, and S. Wartzack, “Robust estimation of clinch joint characteristics based on data-driven methods,” The International Journal of Advanced Manufacturing Technology, 2022, doi: 10.1007/s00170-022-10441-7.' mla: Zirngibl, Christoph, et al. “Robust Estimation of Clinch Joint Characteristics Based on Data-Driven Methods.” The International Journal of Advanced Manufacturing Technology, Springer Science and Business Media LLC, 2022, doi:10.1007/s00170-022-10441-7. short: C. Zirngibl, B. Schleich, S. Wartzack, The International Journal of Advanced Manufacturing Technology (2022). date_created: 2022-12-14T12:24:29Z date_updated: 2023-01-02T11:14:26Z department: - _id: '630' doi: 10.1007/s00170-022-10441-7 keyword: - Industrial and Manufacturing Engineering - Computer Science Applications - Mechanical Engineering - Software - Control and Systems Engineering language: - iso: eng main_file_link: - open_access: '1' url: https://link.springer.com/article/10.1007/s00170-022-10441-7 oa: '1' project: - _id: '130' grant_number: '418701707' name: 'TRR 285: TRR 285' - _id: '132' name: 'TRR 285 - B: TRR 285 - Project Area B' - _id: '144' name: 'TRR 285 – B05: TRR 285 - Subproject B05' publication: The International Journal of Advanced Manufacturing Technology publication_identifier: issn: - 0268-3768 - 1433-3015 publication_status: published publisher: Springer Science and Business Media LLC status: public title: Robust estimation of clinch joint characteristics based on data-driven methods type: journal_article user_id: '14931' year: '2022' ... --- _id: '34261' abstract: - lang: eng text: Mechanical clinching is used to create lightweight hybrid structures. In order to estimate the service life of clinched components, its fatigue properties need to be known under different mechanical loading conditions. In addition to fatigue, corrosion is another factor that affects the fatigue life of clinched joints. In the literature, many corrosion and high-cycle fatigue damage models exist. However, little is known about how both phenomena interact in clinched joints. In this article, the influence of galvanic corrosion on clinched EN AW-6014/HCT590X + Z sheets on the fatigue life is investigated by means of numerical simulations and experimental results. An accurate prediction of the Wöhler lines of non-corroded and pre-corroded clinched specimens is shown. author: - first_name: Sven full_name: Harzheim, Sven last_name: Harzheim - first_name: Martin full_name: Hofmann, Martin last_name: Hofmann - first_name: Thomas full_name: Wallmersperger, Thomas last_name: Wallmersperger citation: ama: Harzheim S, Hofmann M, Wallmersperger T. Numerical fatigue life prediction of corroded and non-corroded clinched joints. Mechanics of Advanced Materials and Structures. Published online 2022:1-6. doi:10.1080/15376494.2022.2140233 apa: Harzheim, S., Hofmann, M., & Wallmersperger, T. (2022). Numerical fatigue life prediction of corroded and non-corroded clinched joints. Mechanics of Advanced Materials and Structures, 1–6. https://doi.org/10.1080/15376494.2022.2140233 bibtex: '@article{Harzheim_Hofmann_Wallmersperger_2022, title={Numerical fatigue life prediction of corroded and non-corroded clinched joints}, DOI={10.1080/15376494.2022.2140233}, journal={Mechanics of Advanced Materials and Structures}, publisher={Informa UK Limited}, author={Harzheim, Sven and Hofmann, Martin and Wallmersperger, Thomas}, year={2022}, pages={1–6} }' chicago: Harzheim, Sven, Martin Hofmann, and Thomas Wallmersperger. “Numerical Fatigue Life Prediction of Corroded and Non-Corroded Clinched Joints.” Mechanics of Advanced Materials and Structures, 2022, 1–6. https://doi.org/10.1080/15376494.2022.2140233. ieee: 'S. Harzheim, M. Hofmann, and T. Wallmersperger, “Numerical fatigue life prediction of corroded and non-corroded clinched joints,” Mechanics of Advanced Materials and Structures, pp. 1–6, 2022, doi: 10.1080/15376494.2022.2140233.' mla: Harzheim, Sven, et al. “Numerical Fatigue Life Prediction of Corroded and Non-Corroded Clinched Joints.” Mechanics of Advanced Materials and Structures, Informa UK Limited, 2022, pp. 1–6, doi:10.1080/15376494.2022.2140233. short: S. Harzheim, M. Hofmann, T. Wallmersperger, Mechanics of Advanced Materials and Structures (2022) 1–6. date_created: 2022-12-07T10:03:17Z date_updated: 2023-01-02T11:10:49Z department: - _id: '630' doi: 10.1080/15376494.2022.2140233 keyword: - Mechanical Engineering - Mechanics of Materials - General Materials Science - General Mathematics - Civil and Structural Engineering language: - iso: eng page: 1-6 project: - _id: '130' grant_number: '418701707' name: 'TRR 285: TRR 285' - _id: '132' name: 'TRR 285 - B: TRR 285 - Project Area B' - _id: '142' name: 'TRR 285 – B03: TRR 285 - Subproject B03' publication: Mechanics of Advanced Materials and Structures publication_identifier: issn: - 1537-6494 - 1537-6532 publication_status: published publisher: Informa UK Limited status: public title: Numerical fatigue life prediction of corroded and non-corroded clinched joints type: journal_article user_id: '14931' year: '2022' ... --- _id: '34053' article_number: '2102159' author: - first_name: Thomas full_name: Riedl, Thomas id: '36950' last_name: Riedl - first_name: Vinay full_name: Kunnathully, Vinay last_name: Kunnathully - first_name: Alexander full_name: Trapp, Alexander last_name: Trapp - first_name: Timo full_name: Langer, Timo last_name: Langer - first_name: Dirk full_name: Reuter, Dirk id: '37763' last_name: Reuter - first_name: Jörg full_name: Lindner, Jörg id: '20797' last_name: Lindner citation: ama: Riedl T, Kunnathully V, Trapp A, Langer T, Reuter D, Lindner J. Size‐Dependent Strain Relaxation in InAs Quantum Dots on Top of GaAs(111)A Nanopillars. Advanced Materials Interfaces. 2022;9(11). doi:10.1002/admi.202102159 apa: Riedl, T., Kunnathully, V., Trapp, A., Langer, T., Reuter, D., & Lindner, J. (2022). Size‐Dependent Strain Relaxation in InAs Quantum Dots on Top of GaAs(111)A Nanopillars. Advanced Materials Interfaces, 9(11), Article 2102159. https://doi.org/10.1002/admi.202102159 bibtex: '@article{Riedl_Kunnathully_Trapp_Langer_Reuter_Lindner_2022, title={Size‐Dependent Strain Relaxation in InAs Quantum Dots on Top of GaAs(111)A Nanopillars}, volume={9}, DOI={10.1002/admi.202102159}, number={112102159}, journal={Advanced Materials Interfaces}, publisher={Wiley}, author={Riedl, Thomas and Kunnathully, Vinay and Trapp, Alexander and Langer, Timo and Reuter, Dirk and Lindner, Jörg}, year={2022} }' chicago: Riedl, Thomas, Vinay Kunnathully, Alexander Trapp, Timo Langer, Dirk Reuter, and Jörg Lindner. “Size‐Dependent Strain Relaxation in InAs Quantum Dots on Top of GaAs(111)A Nanopillars.” Advanced Materials Interfaces 9, no. 11 (2022). https://doi.org/10.1002/admi.202102159. ieee: 'T. Riedl, V. Kunnathully, A. Trapp, T. Langer, D. Reuter, and J. Lindner, “Size‐Dependent Strain Relaxation in InAs Quantum Dots on Top of GaAs(111)A Nanopillars,” Advanced Materials Interfaces, vol. 9, no. 11, Art. no. 2102159, 2022, doi: 10.1002/admi.202102159.' mla: Riedl, Thomas, et al. “Size‐Dependent Strain Relaxation in InAs Quantum Dots on Top of GaAs(111)A Nanopillars.” Advanced Materials Interfaces, vol. 9, no. 11, 2102159, Wiley, 2022, doi:10.1002/admi.202102159. short: T. Riedl, V. Kunnathully, A. Trapp, T. Langer, D. Reuter, J. Lindner, Advanced Materials Interfaces 9 (2022). date_created: 2022-11-10T14:11:18Z date_updated: 2023-01-10T12:09:09Z department: - _id: '15' - _id: '230' doi: 10.1002/admi.202102159 intvolume: ' 9' issue: '11' keyword: - Mechanical Engineering - Mechanics of Materials language: - iso: eng publication: Advanced Materials Interfaces publication_identifier: issn: - 2196-7350 - 2196-7350 publication_status: published publisher: Wiley status: public title: Size‐Dependent Strain Relaxation in InAs Quantum Dots on Top of GaAs(111)A Nanopillars type: journal_article user_id: '77496' volume: 9 year: '2022' ... --- _id: '32413' abstract: - lang: eng text: Background. Clinching is a conventional cold forming process in which two or more sheets can be joined without auxiliary parts. A pre-forming of the parts to be joined, which is introduced by previous manufacturing steps, has an influence on the joining result. When considering the suitability for joining with regard to the formability of the materials, the influence of the preforming steps must be taken into account. The influences of strain hardening and sheet thickness on the joining properties must be investigated. In this context, a Finite Element Method (FEM) based metamodel analysis of the clinching process was carried out in [1] to investigate the robustness of the clinching process with respect to the different material pre-strains. In [2], the method was extended to the load bearing simulation.Procedure. The metamodel from preliminary work based on various FE models, which predicts the load-bearing capacity of a clinched joint influenced by pre-straining, is compared here with experimental data and the accuracy of the metamodel prediction is discussed. For this purpose an experimental procedure was further develop which allows the preforming of metal sheets from which joining specimens can be separated with a certain degree of unidirectional deformation. In the study, the procedure for preparing the joint specimens and the results of the loading tests are presented. Different possible relevant pre-strain combinations are investigated and compared with the simulation results, to validate the FE models and choose suitable metamodel. author: - first_name: Christian Roman full_name: Bielak, Christian Roman id: '34782' last_name: Bielak - first_name: Max full_name: Böhnke, Max id: '45779' last_name: Böhnke - first_name: Mathias full_name: Bobbert, Mathias id: '7850' last_name: Bobbert - first_name: Gerson full_name: Meschut, Gerson id: '32056' last_name: Meschut orcid: 0000-0002-2763-1246 citation: ama: Bielak CR, Böhnke M, Bobbert M, Meschut G. Experimental and Numerical Investigation on Manufacturing-Induced Pre-Strain on the Load-Bearing Capacity of Clinched Joints. Key Engineering Materials. 2022;926:1516-1526. doi:10.4028/p-5d009y apa: Bielak, C. R., Böhnke, M., Bobbert, M., & Meschut, G. (2022). Experimental and Numerical Investigation on Manufacturing-Induced Pre-Strain on the Load-Bearing Capacity of Clinched Joints. Key Engineering Materials, 926, 1516–1526. https://doi.org/10.4028/p-5d009y bibtex: '@article{Bielak_Böhnke_Bobbert_Meschut_2022, title={Experimental and Numerical Investigation on Manufacturing-Induced Pre-Strain on the Load-Bearing Capacity of Clinched Joints}, volume={926}, DOI={10.4028/p-5d009y}, journal={Key Engineering Materials}, publisher={Trans Tech Publications, Ltd.}, author={Bielak, Christian Roman and Böhnke, Max and Bobbert, Mathias and Meschut, Gerson}, year={2022}, pages={1516–1526} }' chicago: 'Bielak, Christian Roman, Max Böhnke, Mathias Bobbert, and Gerson Meschut. “Experimental and Numerical Investigation on Manufacturing-Induced Pre-Strain on the Load-Bearing Capacity of Clinched Joints.” Key Engineering Materials 926 (2022): 1516–26. https://doi.org/10.4028/p-5d009y.' ieee: 'C. R. Bielak, M. Böhnke, M. Bobbert, and G. Meschut, “Experimental and Numerical Investigation on Manufacturing-Induced Pre-Strain on the Load-Bearing Capacity of Clinched Joints,” Key Engineering Materials, vol. 926, pp. 1516–1526, 2022, doi: 10.4028/p-5d009y.' mla: Bielak, Christian Roman, et al. “Experimental and Numerical Investigation on Manufacturing-Induced Pre-Strain on the Load-Bearing Capacity of Clinched Joints.” Key Engineering Materials, vol. 926, Trans Tech Publications, Ltd., 2022, pp. 1516–26, doi:10.4028/p-5d009y. short: C.R. Bielak, M. Böhnke, M. Bobbert, G. Meschut, Key Engineering Materials 926 (2022) 1516–1526. date_created: 2022-07-25T11:16:15Z date_updated: 2023-01-12T14:22:52Z department: - _id: '157' doi: 10.4028/p-5d009y intvolume: ' 926' keyword: - Mechanical Engineering - Mechanics of Materials - General Materials Science language: - iso: eng page: 1516-1526 publication: Key Engineering Materials publication_identifier: issn: - 1662-9795 publication_status: published publisher: Trans Tech Publications, Ltd. quality_controlled: '1' status: public title: Experimental and Numerical Investigation on Manufacturing-Induced Pre-Strain on the Load-Bearing Capacity of Clinched Joints type: journal_article user_id: '7850' volume: 926 year: '2022' ... --- _id: '43021' article_number: '100137' author: - first_name: B. full_name: Duderija, B. last_name: Duderija - first_name: A. full_name: González-Orive, A. last_name: González-Orive - first_name: H.C. full_name: Schmidt, H.C. last_name: Schmidt - first_name: J.C. full_name: Calderón, J.C. last_name: Calderón - first_name: I. full_name: Hordych, I. last_name: Hordych - first_name: H.J. full_name: Maier, H.J. last_name: Maier - first_name: W. full_name: Homberg, W. last_name: Homberg - first_name: G. full_name: Grundmeier, G. last_name: Grundmeier citation: ama: 'Duderija B, González-Orive A, Schmidt HC, et al. Electrografting of BTSE: Zn films for advanced steel-aluminum joining by plastic deformation. Journal of Advanced Joining Processes. 2022;7. doi:10.1016/j.jajp.2022.100137' apa: 'Duderija, B., González-Orive, A., Schmidt, H. C., Calderón, J. C., Hordych, I., Maier, H. J., Homberg, W., & Grundmeier, G. (2022). Electrografting of BTSE: Zn films for advanced steel-aluminum joining by plastic deformation. Journal of Advanced Joining Processes, 7, Article 100137. https://doi.org/10.1016/j.jajp.2022.100137' bibtex: '@article{Duderija_González-Orive_Schmidt_Calderón_Hordych_Maier_Homberg_Grundmeier_2022, title={Electrografting of BTSE: Zn films for advanced steel-aluminum joining by plastic deformation}, volume={7}, DOI={10.1016/j.jajp.2022.100137}, number={100137}, journal={Journal of Advanced Joining Processes}, publisher={Elsevier BV}, author={Duderija, B. and González-Orive, A. and Schmidt, H.C. and Calderón, J.C. and Hordych, I. and Maier, H.J. and Homberg, W. and Grundmeier, G.}, year={2022} }' chicago: 'Duderija, B., A. González-Orive, H.C. Schmidt, J.C. Calderón, I. Hordych, H.J. Maier, W. Homberg, and G. Grundmeier. “Electrografting of BTSE: Zn Films for Advanced Steel-Aluminum Joining by Plastic Deformation.” Journal of Advanced Joining Processes 7 (2022). https://doi.org/10.1016/j.jajp.2022.100137.' ieee: 'B. Duderija et al., “Electrografting of BTSE: Zn films for advanced steel-aluminum joining by plastic deformation,” Journal of Advanced Joining Processes, vol. 7, Art. no. 100137, 2022, doi: 10.1016/j.jajp.2022.100137.' mla: 'Duderija, B., et al. “Electrografting of BTSE: Zn Films for Advanced Steel-Aluminum Joining by Plastic Deformation.” Journal of Advanced Joining Processes, vol. 7, 100137, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100137.' short: B. Duderija, A. González-Orive, H.C. Schmidt, J.C. Calderón, I. Hordych, H.J. Maier, W. Homberg, G. Grundmeier, Journal of Advanced Joining Processes 7 (2022). date_created: 2023-03-14T13:02:55Z date_updated: 2024-02-06T12:33:20Z department: - _id: '321' - _id: '302' doi: 10.1016/j.jajp.2022.100137 intvolume: ' 7' keyword: - Mechanical Engineering - Mechanics of Materials - Engineering (miscellaneous) - Chemical Engineering (miscellaneous) language: - iso: eng publication: Journal of Advanced Joining Processes publication_identifier: issn: - 2666-3309 publication_status: published publisher: Elsevier BV status: public title: 'Electrografting of BTSE: Zn films for advanced steel-aluminum joining by plastic deformation' type: journal_article user_id: '54863' volume: 7 year: '2022' ... --- _id: '29724' abstract: - lang: eng text: In many manufacturing areas, multi-material designs are implemented in which individual components are joined together to form complex structures with numerous joints. For example, in the automotive sector, cast components are used at the junctions of the body and joined with different types of sheet metal and extruded profiles. To be able to join structures consisting of different materials, alternative joining technologies have emerged in recent years. This includes clinching, which allows assembling of two or more thin sheet metal and casting parts by solely cold forming the material. Clinching the brittle and usually less ductile cast aluminium alloys remains a challenge because the brittle character of the cast aluminium alloys can cause cracks during the forming of the clinched joint. In this study, the influence of the heat treatment time of an aluminium casting alloy AlSi9 on the joinability in the clinching process is investigated. Specific heat treatment of the naturally hard AlSi9 leads to a modification of the eutectic microstructure, which can increase ductility. Based on this, it will be examined if specific clinching die geometries can be used, which achieve an optimized geometrical formation of the clinched joint. The load-bearing capacities of the clinched joints are determined and compared by shear tensile and head tensile tests. Furthermore, the joints are examined microscopically to investigate the influence of the heat treatment on the failure behaviour during the load-bearing tests as well as crack initiation within the joining process. article_number: '146442072210758' author: - first_name: Moritz full_name: Neuser, Moritz id: '32340' last_name: Neuser - first_name: Max full_name: Böhnke, Max id: '45779' last_name: Böhnke - first_name: Olexandr full_name: Grydin, Olexandr id: '43822' last_name: Grydin - first_name: Mathias full_name: Bobbert, Mathias id: '7850' last_name: Bobbert - first_name: Mirko full_name: Schaper, Mirko id: '43720' last_name: Schaper - first_name: Gerson full_name: Meschut, Gerson id: '32056' last_name: Meschut orcid: 0000-0002-2763-1246 citation: ama: 'Neuser M, Böhnke M, Grydin O, Bobbert M, Schaper M, Meschut G. Influence of heat treatment on the suitability for clinching of the aluminium casting alloy AlSi9. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. Published online 2022. doi:10.1177/14644207221075838' apa: 'Neuser, M., Böhnke, M., Grydin, O., Bobbert, M., Schaper, M., & Meschut, G. (2022). Influence of heat treatment on the suitability for clinching of the aluminium casting alloy AlSi9. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Article 146442072210758. https://doi.org/10.1177/14644207221075838' bibtex: '@article{Neuser_Böhnke_Grydin_Bobbert_Schaper_Meschut_2022, title={Influence of heat treatment on the suitability for clinching of the aluminium casting alloy AlSi9}, DOI={10.1177/14644207221075838}, number={146442072210758}, journal={Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications}, publisher={SAGE Publications}, author={Neuser, Moritz and Böhnke, Max and Grydin, Olexandr and Bobbert, Mathias and Schaper, Mirko and Meschut, Gerson}, year={2022} }' chicago: 'Neuser, Moritz, Max Böhnke, Olexandr Grydin, Mathias Bobbert, Mirko Schaper, and Gerson Meschut. “Influence of Heat Treatment on the Suitability for Clinching of the Aluminium Casting Alloy AlSi9.” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 2022. https://doi.org/10.1177/14644207221075838.' ieee: 'M. Neuser, M. Böhnke, O. Grydin, M. Bobbert, M. Schaper, and G. Meschut, “Influence of heat treatment on the suitability for clinching of the aluminium casting alloy AlSi9,” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Art. no. 146442072210758, 2022, doi: 10.1177/14644207221075838.' mla: 'Neuser, Moritz, et al. “Influence of Heat Treatment on the Suitability for Clinching of the Aluminium Casting Alloy AlSi9.” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 146442072210758, SAGE Publications, 2022, doi:10.1177/14644207221075838.' short: 'M. Neuser, M. Böhnke, O. Grydin, M. Bobbert, M. Schaper, G. Meschut, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2022).' date_created: 2022-02-02T09:05:45Z date_updated: 2024-03-14T15:20:44Z department: - _id: '630' - _id: '158' - _id: '157' doi: 10.1177/14644207221075838 keyword: - Mechanical Engineering - General Materials Science language: - iso: eng project: - _id: '130' grant_number: '418701707' name: 'TRR 285: TRR 285' - _id: '131' name: 'TRR 285 - A: TRR 285 - Project Area A' - _id: '136' name: 'TRR 285 – A02: TRR 285 - Subproject A02' - _id: '131' name: 'TRR 285 - A: TRR 285 - Project Area A' - _id: '135' name: 'TRR 285 – A01: TRR 285 - Subproject A01' publication: 'Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications' publication_identifier: issn: - 1464-4207 - 2041-3076 publication_status: published publisher: SAGE Publications quality_controlled: '1' status: public title: Influence of heat treatment on the suitability for clinching of the aluminium casting alloy AlSi9 type: journal_article user_id: '32340' year: '2022' ... --- _id: '29505' abstract: - lang: eng text: In modern vehicle chassis, multi-material design is implemented to apply the appropriate material for each functionality. In spaceframe technology, both sheet metal and continuous cast are joined to castings at the nodal points of the chassis. Since resistance spot welding is not an option when different materials are joined, research is focusing on mechanical joining methods for multi-material designs. To reduce weight and achieve the required strength, hardenable cast aluminium alloys of the AlSi-system are widely used. Thus, 85–90% of aluminium castings in the automotive industry are comprised of the AlSi-system. Due to the limited weldability, mechanical joining is a suitable process. For this application, various optimisation strategies are required to produce a crack-free joint, as the brittle character of the AlSi alloy poses a challenge. Thus, adapted castings with appropriate ductility are needed. Hence, in this study, the age-hardenable cast aluminium alloy AlSi10Mg is investigated regarding the correlation of the different thicknesses, the microstructural characteristics as well as the resulting mechanical properties. A variation of the thicknesses leads to different solidification rates, which in turn affect the microstructure formation and are decisive for the mechanical properties of the casting as well as the joinability. For the investigation, plates with thicknesses from 2.0 to 4.0 mm, each differing by 0.5 mm, are produced via sand casting. Hence, the overall aim is to evaluate the joinability of AlSi10Mg and derive conclusions concerning the microstructure and mechanical properties. article_type: original author: - first_name: Moritz full_name: Neuser, Moritz id: '32340' last_name: Neuser - first_name: Olexandr full_name: Grydin, Olexandr id: '43822' last_name: Grydin - first_name: Y. full_name: Frolov, Y. last_name: Frolov - first_name: Mirko full_name: Schaper, Mirko id: '43720' last_name: Schaper citation: ama: Neuser M, Grydin O, Frolov Y, Schaper M. Influence of solidification rates and heat treatment on the mechanical performance and joinability of the cast aluminium alloy AlSi10Mg. Production Engineering. Published online 2022. doi:10.1007/s11740-022-01106-1 apa: Neuser, M., Grydin, O., Frolov, Y., & Schaper, M. (2022). Influence of solidification rates and heat treatment on the mechanical performance and joinability of the cast aluminium alloy AlSi10Mg. Production Engineering. https://doi.org/10.1007/s11740-022-01106-1 bibtex: '@article{Neuser_Grydin_Frolov_Schaper_2022, title={Influence of solidification rates and heat treatment on the mechanical performance and joinability of the cast aluminium alloy AlSi10Mg}, DOI={10.1007/s11740-022-01106-1}, journal={Production Engineering}, publisher={Springer Science and Business Media LLC}, author={Neuser, Moritz and Grydin, Olexandr and Frolov, Y. and Schaper, Mirko}, year={2022} }' chicago: Neuser, Moritz, Olexandr Grydin, Y. Frolov, and Mirko Schaper. “Influence of Solidification Rates and Heat Treatment on the Mechanical Performance and Joinability of the Cast Aluminium Alloy AlSi10Mg.” Production Engineering, 2022. https://doi.org/10.1007/s11740-022-01106-1. ieee: 'M. Neuser, O. Grydin, Y. Frolov, and M. Schaper, “Influence of solidification rates and heat treatment on the mechanical performance and joinability of the cast aluminium alloy AlSi10Mg,” Production Engineering, 2022, doi: 10.1007/s11740-022-01106-1.' mla: Neuser, Moritz, et al. “Influence of Solidification Rates and Heat Treatment on the Mechanical Performance and Joinability of the Cast Aluminium Alloy AlSi10Mg.” Production Engineering, Springer Science and Business Media LLC, 2022, doi:10.1007/s11740-022-01106-1. short: M. Neuser, O. Grydin, Y. Frolov, M. Schaper, Production Engineering (2022). date_created: 2022-01-24T08:27:48Z date_updated: 2024-03-14T15:21:51Z department: - _id: '43' - _id: '158' - _id: '321' - _id: '630' doi: 10.1007/s11740-022-01106-1 keyword: - Industrial and Manufacturing Engineering - Mechanical Engineering language: - iso: eng project: - _id: '130' grant_number: '418701707' name: 'TRR 285: TRR 285' - _id: '131' name: 'TRR 285 - A: TRR 285 - Project Area A' - _id: '136' name: 'TRR 285 – A02: TRR 285 - Subproject A02' publication: Production Engineering publication_identifier: issn: - 0944-6524 - 1863-7353 publication_status: published publisher: Springer Science and Business Media LLC quality_controlled: '1' status: public title: Influence of solidification rates and heat treatment on the mechanical performance and joinability of the cast aluminium alloy AlSi10Mg type: journal_article user_id: '32340' year: '2022' ... --- _id: '31828' article_number: '100108' author: - first_name: Robert full_name: Kupfer, Robert last_name: Kupfer - first_name: Daniel full_name: Köhler, Daniel last_name: Köhler - first_name: David full_name: Römisch, David last_name: Römisch - first_name: Simon full_name: Wituschek, Simon last_name: Wituschek - first_name: Lars full_name: Ewenz, Lars last_name: Ewenz - first_name: Jan full_name: Kalich, Jan last_name: Kalich - first_name: Deborah full_name: Weiß, Deborah id: '45673' last_name: Weiß - first_name: Behdad full_name: Sadeghian, Behdad last_name: Sadeghian - first_name: Matthias full_name: Busch, Matthias last_name: Busch - first_name: Jan full_name: Krüger, Jan last_name: Krüger - first_name: Moritz full_name: Neuser, Moritz id: '32340' last_name: Neuser - first_name: Olexandr full_name: Grydin, Olexandr id: '43822' last_name: Grydin - first_name: Max full_name: Böhnke, Max id: '45779' last_name: Böhnke - first_name: Christian Roman full_name: Bielak, Christian Roman id: '34782' last_name: Bielak - first_name: Juliane full_name: Troschitz, Juliane last_name: Troschitz citation: ama: Kupfer R, Köhler D, Römisch D, et al. Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties. Journal of Advanced Joining Processes. 2022;5. doi:10.1016/j.jajp.2022.100108 apa: Kupfer, R., Köhler, D., Römisch, D., Wituschek, S., Ewenz, L., Kalich, J., Weiß, D., Sadeghian, B., Busch, M., Krüger, J., Neuser, M., Grydin, O., Böhnke, M., Bielak, C. R., & Troschitz, J. (2022). Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties. Journal of Advanced Joining Processes, 5, Article 100108. https://doi.org/10.1016/j.jajp.2022.100108 bibtex: '@article{Kupfer_Köhler_Römisch_Wituschek_Ewenz_Kalich_Weiß_Sadeghian_Busch_Krüger_et al._2022, title={Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties}, volume={5}, DOI={10.1016/j.jajp.2022.100108}, number={100108}, journal={Journal of Advanced Joining Processes}, publisher={Elsevier BV}, author={Kupfer, Robert and Köhler, Daniel and Römisch, David and Wituschek, Simon and Ewenz, Lars and Kalich, Jan and Weiß, Deborah and Sadeghian, Behdad and Busch, Matthias and Krüger, Jan and et al.}, year={2022} }' chicago: Kupfer, Robert, Daniel Köhler, David Römisch, Simon Wituschek, Lars Ewenz, Jan Kalich, Deborah Weiß, et al. “Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties.” Journal of Advanced Joining Processes 5 (2022). https://doi.org/10.1016/j.jajp.2022.100108. ieee: 'R. Kupfer et al., “Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties,” Journal of Advanced Joining Processes, vol. 5, Art. no. 100108, 2022, doi: 10.1016/j.jajp.2022.100108.' mla: Kupfer, Robert, et al. “Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties.” Journal of Advanced Joining Processes, vol. 5, 100108, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100108. short: R. Kupfer, D. Köhler, D. Römisch, S. Wituschek, L. Ewenz, J. Kalich, D. Weiß, B. Sadeghian, M. Busch, J. Krüger, M. Neuser, O. Grydin, M. Böhnke, C.R. Bielak, J. Troschitz, Journal of Advanced Joining Processes 5 (2022). date_created: 2022-06-09T06:23:00Z date_updated: 2024-03-14T15:22:46Z department: - _id: '157' - _id: '158' doi: 10.1016/j.jajp.2022.100108 intvolume: ' 5' keyword: - Mechanical Engineering - Mechanics of Materials - Engineering (miscellaneous) - Chemical Engineering (miscellaneous) language: - iso: eng project: - _id: '130' grant_number: '418701707' name: 'TRR 285: TRR 285' - _id: '131' name: 'TRR 285 - A: TRR 285 - Project Area A' - _id: '59' grant_number: '231447078' name: 'TRR 142 - A02: TRR 142 - Subproject A02' publication: Journal of Advanced Joining Processes publication_identifier: issn: - 2666-3309 publication_status: published publisher: Elsevier BV quality_controlled: '1' status: public title: Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties type: journal_article user_id: '32340' volume: 5 year: '2022' ... --- _id: '52613' abstract: - lang: eng text: During resistance spot welding of zinc-coated advanced high-strength steels (AHSSs) for automotive production, liquid metal embrittlement (LME) cracking may occur in the event of a combination of various unfavorable influences. In this study, the interactions of different welding current levels and weld times on the tendency for LME cracking in third-generation AHSSs were investigated. LME manifested itself as high-penetration cracks around the circumference of the spot welds for welding currents closely below the expulsion limit. At the same time, the observed tendency for LME cracking showed no direct correlation with the overall heat input of the investigated welding processes. To identify a reliable indicator of the tendency for LME cracking, the local strain rate at the origin of the observed cracks was analyzed over the course of the welding process via finite element simulation. While the local strain rate showed a good correlation with the process-specific LME cracking tendency, it was difficult to interpret due to its discontinuous course. Therefore, based on the experimental measurement of electrode displacement during welding, electrode indentation velocity was proposed as a descriptive indicator for quantifying cracking tendency. author: - first_name: Christoph full_name: Böhne, Christoph id: '22483' last_name: Böhne - first_name: Gerson full_name: Meschut, Gerson id: '32056' last_name: Meschut orcid: 0000-0002-2763-1246 - first_name: MAX full_name: BIEGLER, MAX last_name: BIEGLER - first_name: MICHAEL full_name: RETHMEIER, MICHAEL last_name: RETHMEIER citation: ama: Böhne C, Meschut G, BIEGLER M, RETHMEIER M. The Influence of Electrode Indentation Rate on LME Formation during RSW. Welding Journal. 2022;101(7):197-207. doi:10.29391/2022.101.015 apa: Böhne, C., Meschut, G., BIEGLER, M., & RETHMEIER, M. (2022). The Influence of Electrode Indentation Rate on LME Formation during RSW. Welding Journal, 101(7), 197–207. https://doi.org/10.29391/2022.101.015 bibtex: '@article{Böhne_Meschut_BIEGLER_RETHMEIER_2022, title={The Influence of Electrode Indentation Rate on LME Formation during RSW}, volume={101}, DOI={10.29391/2022.101.015}, number={7}, journal={Welding Journal}, publisher={American Welding Society}, author={Böhne, Christoph and Meschut, Gerson and BIEGLER, MAX and RETHMEIER, MICHAEL}, year={2022}, pages={197–207} }' chicago: 'Böhne, Christoph, Gerson Meschut, MAX BIEGLER, and MICHAEL RETHMEIER. “The Influence of Electrode Indentation Rate on LME Formation during RSW.” Welding Journal 101, no. 7 (2022): 197–207. https://doi.org/10.29391/2022.101.015.' ieee: 'C. Böhne, G. Meschut, M. BIEGLER, and M. RETHMEIER, “The Influence of Electrode Indentation Rate on LME Formation during RSW,” Welding Journal, vol. 101, no. 7, pp. 197–207, 2022, doi: 10.29391/2022.101.015.' mla: Böhne, Christoph, et al. “The Influence of Electrode Indentation Rate on LME Formation during RSW.” Welding Journal, vol. 101, no. 7, American Welding Society, 2022, pp. 197–207, doi:10.29391/2022.101.015. short: C. Böhne, G. Meschut, M. BIEGLER, M. RETHMEIER, Welding Journal 101 (2022) 197–207. date_created: 2024-03-18T11:56:12Z date_updated: 2024-03-18T12:43:49Z department: - _id: '157' doi: 10.29391/2022.101.015 intvolume: ' 101' issue: '7' keyword: - Metals and Alloys - Mechanical Engineering - Mechanics of Materials language: - iso: eng page: 197-207 publication: Welding Journal publication_identifier: issn: - 0043-2296 - 2689-0445 publication_status: published publisher: American Welding Society quality_controlled: '1' status: public title: The Influence of Electrode Indentation Rate on LME Formation during RSW type: journal_article user_id: '60398' volume: 101 year: '2022' ... --- _id: '34215' abstract: - lang: eng text: 'Clinching as a mechanical joining technique allows a fast and reliable joining of metal sheets in large-scale production. An efficient design and dimensioning of clinched joints requires a holistic understanding of the material, the joining process and the resulting properties of the joint. In this paper, the process chain for clinching metal sheets is described and experimental techniques are proposed to analyze the process-microstructure-property relationships from the sheet metal to the joined structure. At the example of clinching aluminum EN AW 6014, characterization methods are applied and discussed for the following characteristics: the mechanical properties of the sheet materials, the tribological behavior in the joining system, the joining process and the resulting material structure, the load-bearing behavior of the joint, the damage and degradation as well as the service life and crack growth behavior. The compilation of the characterization methods gives an overview on the advantages and weaknesses of the methods and the multiple interactions of material, process and properties during clinching. In addition, the results of the analyses on EN AW 6014 can be applied for parameterization and validation of simulations.' article_number: '100108' author: - first_name: Robert full_name: Kupfer, Robert last_name: Kupfer - first_name: Daniel full_name: Köhler, Daniel last_name: Köhler - first_name: David full_name: Römisch, David last_name: Römisch - first_name: Simon full_name: Wituschek, Simon last_name: Wituschek - first_name: Lars full_name: Ewenz, Lars last_name: Ewenz - first_name: Jan full_name: Kalich, Jan last_name: Kalich - first_name: Deborah full_name: Weiß, Deborah id: '45673' last_name: Weiß - first_name: Behdad full_name: Sadeghian, Behdad last_name: Sadeghian - first_name: Matthias full_name: Busch, Matthias last_name: Busch - first_name: Jan Tobias full_name: Krüger, Jan Tobias id: '44307' last_name: Krüger orcid: 0000-0002-0827-9654 - first_name: Moritz full_name: Neuser, Moritz id: '32340' last_name: Neuser - first_name: Olexandr full_name: Grydin, Olexandr id: '43822' last_name: Grydin - first_name: Max full_name: Böhnke, Max id: '45779' last_name: Böhnke - first_name: Christian Roman full_name: Bielak, Christian Roman id: '34782' last_name: Bielak - first_name: Juliane full_name: Troschitz, Juliane last_name: Troschitz citation: ama: Kupfer R, Köhler D, Römisch D, et al. Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties. Journal of Advanced Joining Processes. 2022;5. doi:10.1016/j.jajp.2022.100108 apa: Kupfer, R., Köhler, D., Römisch, D., Wituschek, S., Ewenz, L., Kalich, J., Weiß, D., Sadeghian, B., Busch, M., Krüger, J. T., Neuser, M., Grydin, O., Böhnke, M., Bielak, C. R., & Troschitz, J. (2022). Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties. Journal of Advanced Joining Processes, 5, Article 100108. https://doi.org/10.1016/j.jajp.2022.100108 bibtex: '@article{Kupfer_Köhler_Römisch_Wituschek_Ewenz_Kalich_Weiß_Sadeghian_Busch_Krüger_et al._2022, title={Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties}, volume={5}, DOI={10.1016/j.jajp.2022.100108}, number={100108}, journal={Journal of Advanced Joining Processes}, publisher={Elsevier BV}, author={Kupfer, Robert and Köhler, Daniel and Römisch, David and Wituschek, Simon and Ewenz, Lars and Kalich, Jan and Weiß, Deborah and Sadeghian, Behdad and Busch, Matthias and Krüger, Jan Tobias and et al.}, year={2022} }' chicago: Kupfer, Robert, Daniel Köhler, David Römisch, Simon Wituschek, Lars Ewenz, Jan Kalich, Deborah Weiß, et al. “Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties.” Journal of Advanced Joining Processes 5 (2022). https://doi.org/10.1016/j.jajp.2022.100108. ieee: 'R. Kupfer et al., “Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties,” Journal of Advanced Joining Processes, vol. 5, Art. no. 100108, 2022, doi: 10.1016/j.jajp.2022.100108.' mla: Kupfer, Robert, et al. “Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties.” Journal of Advanced Joining Processes, vol. 5, 100108, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100108. short: R. Kupfer, D. Köhler, D. Römisch, S. Wituschek, L. Ewenz, J. Kalich, D. Weiß, B. Sadeghian, M. Busch, J.T. Krüger, M. Neuser, O. Grydin, M. Böhnke, C.R. Bielak, J. Troschitz, Journal of Advanced Joining Processes 5 (2022). date_created: 2022-12-05T21:17:22Z date_updated: 2024-03-20T11:54:33Z department: - _id: '630' - _id: '158' doi: 10.1016/j.jajp.2022.100108 intvolume: ' 5' keyword: - Mechanical Engineering - Mechanics of Materials - Engineering (miscellaneous) - Chemical Engineering (miscellaneous) language: - iso: eng project: - _id: '130' grant_number: '418701707' name: 'TRR 285: TRR 285' - _id: '133' name: 'TRR 285 - C: TRR 285 - Project Area C' - _id: '148' name: 'TRR 285 – C04: TRR 285 - Subproject C04' - _id: '146' name: 'TRR 285 – C02: TRR 285 - Subproject C02' - _id: '145' name: 'TRR 285 – C01: TRR 285 - Subproject C01' - _id: '132' name: 'TRR 285 - B: TRR 285 - Project Area B' - _id: '141' name: 'TRR 285 – B02: TRR 285 - Subproject B02' - _id: '138' name: 'TRR 285 – A04: TRR 285 - Subproject A04' - _id: '135' name: 'TRR 285 – A01: TRR 285 - Subproject A01' - _id: '136' name: 'TRR 285 – A02: TRR 285 - Subproject A02' - _id: '149' name: 'TRR 285 – C05: TRR 285 - Subproject C05' - _id: '143' name: 'TRR 285 – B04: TRR 285 - Subproject B04' publication: Journal of Advanced Joining Processes publication_identifier: issn: - 2666-3309 publication_status: published publisher: Elsevier BV quality_controlled: '1' status: public title: Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties type: journal_article user_id: '34782' volume: 5 year: '2022' ... --- _id: '53084' abstract: - lang: eng text: "AbstractThe thermal decomposition of Zr(acac)4 is studied in a SiC-microreactor on the micro-second time scale. By utilizing synchrotron radiation and photoelectron photoion coincidence spectroscopy, six important zirconium intermediates, as for instance Zr(C5H7O2)2(C5H6O2), and Zr(C5H6O2)2, are identified in the gas phase for the first time. The adiabatic ionization thresholds of intermediately formed zirconium species are estimated and the main products of their thermal decomposition, acetylacetone, acetylallene and acetone are characterized unambiguously and isomer-selectively. Based on all detected intermediates, we deduce the predominant pyrolysis pathways of the precursor in the temperature range from 400 to 900 K. Our findings are complemented by numerical simulations of the flow field in the microreactor, which show that the choice of dilution gas significantly influences the temperature profile and residence times in the microreactor, such that helium provides a more uniform flow field than argon and should preferentially be used.\r\n Graphical abstract\r\n Using a soft ionization method coupled to velocity map imaging (VMI), leads to valuable insights in the thermal decomposition of Zr(C5H7O2)4, used in the synthesis of functional nanomaterials and ceramic coatings. Thanks to the use of a microreactor, important gas" author: - first_name: Sebastian full_name: Grimm, Sebastian last_name: Grimm - first_name: Seung-Jin full_name: Baik, Seung-Jin last_name: Baik - first_name: Patrick full_name: Hemberger, Patrick last_name: Hemberger - first_name: Tina full_name: Kasper, Tina id: '94562' last_name: Kasper orcid: '0000-0003-3993-5316 ' - first_name: Andreas M. full_name: Kempf, Andreas M. last_name: Kempf - first_name: Burak full_name: Atakan, Burak last_name: Atakan citation: ama: 'Grimm S, Baik S-J, Hemberger P, Kasper T, Kempf AM, Atakan B. Insights into the decomposition of zirconium acetylacetonate using synchrotron radiation: Routes to the formation of volatile Zr-intermediates. Journal of Materials Research. 2022;37(9):1558-1575. doi:10.1557/s43578-022-00566-6' apa: 'Grimm, S., Baik, S.-J., Hemberger, P., Kasper, T., Kempf, A. M., & Atakan, B. (2022). Insights into the decomposition of zirconium acetylacetonate using synchrotron radiation: Routes to the formation of volatile Zr-intermediates. Journal of Materials Research, 37(9), 1558–1575. https://doi.org/10.1557/s43578-022-00566-6' bibtex: '@article{Grimm_Baik_Hemberger_Kasper_Kempf_Atakan_2022, title={Insights into the decomposition of zirconium acetylacetonate using synchrotron radiation: Routes to the formation of volatile Zr-intermediates}, volume={37}, DOI={10.1557/s43578-022-00566-6}, number={9}, journal={Journal of Materials Research}, publisher={Springer Science and Business Media LLC}, author={Grimm, Sebastian and Baik, Seung-Jin and Hemberger, Patrick and Kasper, Tina and Kempf, Andreas M. and Atakan, Burak}, year={2022}, pages={1558–1575} }' chicago: 'Grimm, Sebastian, Seung-Jin Baik, Patrick Hemberger, Tina Kasper, Andreas M. Kempf, and Burak Atakan. “Insights into the Decomposition of Zirconium Acetylacetonate Using Synchrotron Radiation: Routes to the Formation of Volatile Zr-Intermediates.” Journal of Materials Research 37, no. 9 (2022): 1558–75. https://doi.org/10.1557/s43578-022-00566-6.' ieee: 'S. Grimm, S.-J. Baik, P. Hemberger, T. Kasper, A. M. Kempf, and B. Atakan, “Insights into the decomposition of zirconium acetylacetonate using synchrotron radiation: Routes to the formation of volatile Zr-intermediates,” Journal of Materials Research, vol. 37, no. 9, pp. 1558–1575, 2022, doi: 10.1557/s43578-022-00566-6.' mla: 'Grimm, Sebastian, et al. “Insights into the Decomposition of Zirconium Acetylacetonate Using Synchrotron Radiation: Routes to the Formation of Volatile Zr-Intermediates.” Journal of Materials Research, vol. 37, no. 9, Springer Science and Business Media LLC, 2022, pp. 1558–75, doi:10.1557/s43578-022-00566-6.' short: S. Grimm, S.-J. Baik, P. Hemberger, T. Kasper, A.M. Kempf, B. Atakan, Journal of Materials Research 37 (2022) 1558–1575. date_created: 2024-03-27T17:48:20Z date_updated: 2024-03-27T17:49:03Z department: - _id: '728' doi: 10.1557/s43578-022-00566-6 extern: '1' intvolume: ' 37' issue: '9' keyword: - Mechanical Engineering - Mechanics of Materials - Condensed Matter Physics - General Materials Science language: - iso: eng page: 1558-1575 publication: Journal of Materials Research publication_identifier: issn: - 0884-2914 - 2044-5326 publication_status: published publisher: Springer Science and Business Media LLC status: public title: 'Insights into the decomposition of zirconium acetylacetonate using synchrotron radiation: Routes to the formation of volatile Zr-intermediates' type: journal_article user_id: '94562' volume: 37 year: '2022' ... --- _id: '53083' abstract: - lang: eng text: AbstractThe decomposition and reduction of ferrocene, an important precursor for iron chemical vapor deposition and catalyst for nanotube synthesis, is investigated in the gas‐phase. Reactive intermediates are detected to understand the underlying chemistry by using a microreactor coupled to a synchrotron light source. Utilizing soft photoionization coupled with photoelectron‐photoion coincidence detection enables us to characterize exclusive intermediates isomer‐selectively. A reaction mechanism for the ferrocene decomposition is proposed, which proceeds as a two‐step process. Initially, the molecule decomposes in a homogeneous surface reaction at temperatures <900 K, leading to products such as cyclopentadiene and cyclopentadienyl radicals that are immediately released to the gas‐phase. At higher temperatures, ferrocene rapidly decomposes in the gas‐phase, losing two cyclopentadienyl radicals in conjunction with iron. The addition of hydrogen to the reaction mixture reduces the decomposition temperature, and changes the branching ratio of the products. This change is mainly attributed to the H‐addition of cyclopentadienyl radicals on the surface, which leads to a release of cyclopentadiene into the gas‐phase. On the surface, ligand fragments may also undergo a series of catalytic H‐losses leading most probably to a high carbon content in the film. Finally, Arrhenius parameters for both global reactions are presented. author: - first_name: Sebastian full_name: Grimm, Sebastian last_name: Grimm - first_name: Patrick full_name: Hemberger, Patrick last_name: Hemberger - first_name: Tina full_name: Kasper, Tina id: '94562' last_name: Kasper orcid: '0000-0003-3993-5316 ' - first_name: Burak full_name: Atakan, Burak last_name: Atakan citation: ama: 'Grimm S, Hemberger P, Kasper T, Atakan B. Mechanism and Kinetics of the Thermal Decomposition of Fe(C5H5)2 in Inert and Reductive Atmosphere: A Synchrotron‐Assisted Investigation in A Microreactor. Advanced Materials Interfaces. 2022;9(22). doi:10.1002/admi.202200192' apa: 'Grimm, S., Hemberger, P., Kasper, T., & Atakan, B. (2022). Mechanism and Kinetics of the Thermal Decomposition of Fe(C5H5)2 in Inert and Reductive Atmosphere: A Synchrotron‐Assisted Investigation in A Microreactor. Advanced Materials Interfaces, 9(22). https://doi.org/10.1002/admi.202200192' bibtex: '@article{Grimm_Hemberger_Kasper_Atakan_2022, title={Mechanism and Kinetics of the Thermal Decomposition of Fe(C5H5)2 in Inert and Reductive Atmosphere: A Synchrotron‐Assisted Investigation in A Microreactor}, volume={9}, DOI={10.1002/admi.202200192}, number={22}, journal={Advanced Materials Interfaces}, publisher={Wiley}, author={Grimm, Sebastian and Hemberger, Patrick and Kasper, Tina and Atakan, Burak}, year={2022} }' chicago: 'Grimm, Sebastian, Patrick Hemberger, Tina Kasper, and Burak Atakan. “Mechanism and Kinetics of the Thermal Decomposition of Fe(C5H5)2 in Inert and Reductive Atmosphere: A Synchrotron‐Assisted Investigation in A Microreactor.” Advanced Materials Interfaces 9, no. 22 (2022). https://doi.org/10.1002/admi.202200192.' ieee: 'S. Grimm, P. Hemberger, T. Kasper, and B. Atakan, “Mechanism and Kinetics of the Thermal Decomposition of Fe(C5H5)2 in Inert and Reductive Atmosphere: A Synchrotron‐Assisted Investigation in A Microreactor,” Advanced Materials Interfaces, vol. 9, no. 22, 2022, doi: 10.1002/admi.202200192.' mla: 'Grimm, Sebastian, et al. “Mechanism and Kinetics of the Thermal Decomposition of Fe(C5H5)2 in Inert and Reductive Atmosphere: A Synchrotron‐Assisted Investigation in A Microreactor.” Advanced Materials Interfaces, vol. 9, no. 22, Wiley, 2022, doi:10.1002/admi.202200192.' short: S. Grimm, P. Hemberger, T. Kasper, B. Atakan, Advanced Materials Interfaces 9 (2022). date_created: 2024-03-27T17:47:25Z date_updated: 2024-03-27T17:48:57Z department: - _id: '728' doi: 10.1002/admi.202200192 extern: '1' intvolume: ' 9' issue: '22' keyword: - Mechanical Engineering - Mechanics of Materials language: - iso: eng publication: Advanced Materials Interfaces publication_identifier: issn: - 2196-7350 - 2196-7350 publication_status: published publisher: Wiley status: public title: 'Mechanism and Kinetics of the Thermal Decomposition of Fe(C5H5)2 in Inert and Reductive Atmosphere: A Synchrotron‐Assisted Investigation in A Microreactor' type: journal_article user_id: '94562' volume: 9 year: '2022' ... --- _id: '33869' article_number: '105140' author: - first_name: B. full_name: Bonnard, B. last_name: Bonnard - first_name: O. full_name: Cots, O. last_name: Cots - first_name: J. full_name: Gergaud, J. last_name: Gergaud - first_name: Boris Edgar full_name: Wembe Moafo, Boris Edgar id: '95394' last_name: Wembe Moafo citation: ama: Bonnard B, Cots O, Gergaud J, Wembe Moafo BE. Abnormal geodesics in 2D-Zermelo navigation problems in the case of revolution and the fan shape of the small time balls. Systems &amp; Control Letters. 2022;161. doi:10.1016/j.sysconle.2022.105140 apa: Bonnard, B., Cots, O., Gergaud, J., & Wembe Moafo, B. E. (2022). Abnormal geodesics in 2D-Zermelo navigation problems in the case of revolution and the fan shape of the small time balls. Systems &amp; Control Letters, 161, Article 105140. https://doi.org/10.1016/j.sysconle.2022.105140 bibtex: '@article{Bonnard_Cots_Gergaud_Wembe Moafo_2022, title={Abnormal geodesics in 2D-Zermelo navigation problems in the case of revolution and the fan shape of the small time balls}, volume={161}, DOI={10.1016/j.sysconle.2022.105140}, number={105140}, journal={Systems &amp; Control Letters}, publisher={Elsevier BV}, author={Bonnard, B. and Cots, O. and Gergaud, J. and Wembe Moafo, Boris Edgar}, year={2022} }' chicago: Bonnard, B., O. Cots, J. Gergaud, and Boris Edgar Wembe Moafo. “Abnormal Geodesics in 2D-Zermelo Navigation Problems in the Case of Revolution and the Fan Shape of the Small Time Balls.” Systems &amp; Control Letters 161 (2022). https://doi.org/10.1016/j.sysconle.2022.105140. ieee: 'B. Bonnard, O. Cots, J. Gergaud, and B. E. Wembe Moafo, “Abnormal geodesics in 2D-Zermelo navigation problems in the case of revolution and the fan shape of the small time balls,” Systems &amp; Control Letters, vol. 161, Art. no. 105140, 2022, doi: 10.1016/j.sysconle.2022.105140.' mla: Bonnard, B., et al. “Abnormal Geodesics in 2D-Zermelo Navigation Problems in the Case of Revolution and the Fan Shape of the Small Time Balls.” Systems &amp; Control Letters, vol. 161, 105140, Elsevier BV, 2022, doi:10.1016/j.sysconle.2022.105140. short: B. Bonnard, O. Cots, J. Gergaud, B.E. Wembe Moafo, Systems &amp; Control Letters 161 (2022). date_created: 2022-10-24T12:54:24Z date_updated: 2023-01-16T12:08:58Z doi: 10.1016/j.sysconle.2022.105140 intvolume: ' 161' keyword: - Electrical and Electronic Engineering - Mechanical Engineering - General Computer Science - Control and Systems Engineering language: - iso: eng publication: Systems & Control Letters publication_identifier: issn: - 0167-6911 publication_status: published publisher: Elsevier BV status: public title: Abnormal geodesics in 2D-Zermelo navigation problems in the case of revolution and the fan shape of the small time balls type: journal_article user_id: '95394' volume: 161 year: '2022' ... --- _id: '36810' author: - first_name: Denis A. full_name: Knyazkov, Denis A. last_name: Knyazkov - first_name: Andrey V. full_name: Cherepanov, Andrey V. last_name: Cherepanov - first_name: Vitaly G. full_name: Kiselev, Vitaly G. last_name: Kiselev - first_name: Ilya E. full_name: Gerasimov, Ilya E. last_name: Gerasimov - first_name: Tina full_name: Kasper, Tina id: '94562' last_name: Kasper orcid: '0000-0003-3993-5316 ' - first_name: Andrey G. full_name: Shmakov, Andrey G. last_name: Shmakov citation: ama: Knyazkov DA, Cherepanov AV, Kiselev VG, Gerasimov IE, Kasper T, Shmakov AG. Experimental and kinetic modeling study of the positive ions in premixed ethylene flames over a range of equivalence ratios. Proceedings of the Combustion Institute. Published online 2022. doi:10.1016/j.proci.2022.07.157 apa: Knyazkov, D. A., Cherepanov, A. V., Kiselev, V. G., Gerasimov, I. E., Kasper, T., & Shmakov, A. G. (2022). Experimental and kinetic modeling study of the positive ions in premixed ethylene flames over a range of equivalence ratios. Proceedings of the Combustion Institute. https://doi.org/10.1016/j.proci.2022.07.157 bibtex: '@article{Knyazkov_Cherepanov_Kiselev_Gerasimov_Kasper_Shmakov_2022, title={Experimental and kinetic modeling study of the positive ions in premixed ethylene flames over a range of equivalence ratios}, DOI={10.1016/j.proci.2022.07.157}, journal={Proceedings of the Combustion Institute}, publisher={Elsevier BV}, author={Knyazkov, Denis A. and Cherepanov, Andrey V. and Kiselev, Vitaly G. and Gerasimov, Ilya E. and Kasper, Tina and Shmakov, Andrey G.}, year={2022} }' chicago: Knyazkov, Denis A., Andrey V. Cherepanov, Vitaly G. Kiselev, Ilya E. Gerasimov, Tina Kasper, and Andrey G. Shmakov. “Experimental and Kinetic Modeling Study of the Positive Ions in Premixed Ethylene Flames over a Range of Equivalence Ratios.” Proceedings of the Combustion Institute, 2022. https://doi.org/10.1016/j.proci.2022.07.157. ieee: 'D. A. Knyazkov, A. V. Cherepanov, V. G. Kiselev, I. E. Gerasimov, T. Kasper, and A. G. Shmakov, “Experimental and kinetic modeling study of the positive ions in premixed ethylene flames over a range of equivalence ratios,” Proceedings of the Combustion Institute, 2022, doi: 10.1016/j.proci.2022.07.157.' mla: Knyazkov, Denis A., et al. “Experimental and Kinetic Modeling Study of the Positive Ions in Premixed Ethylene Flames over a Range of Equivalence Ratios.” Proceedings of the Combustion Institute, Elsevier BV, 2022, doi:10.1016/j.proci.2022.07.157. short: D.A. Knyazkov, A.V. Cherepanov, V.G. Kiselev, I.E. Gerasimov, T. Kasper, A.G. Shmakov, Proceedings of the Combustion Institute (2022). date_created: 2023-01-13T16:28:36Z date_updated: 2023-01-17T08:25:41Z department: - _id: '9' - _id: '728' doi: 10.1016/j.proci.2022.07.157 keyword: - Physical and Theoretical Chemistry - Mechanical Engineering - General Chemical Engineering language: - iso: eng publication: Proceedings of the Combustion Institute publication_identifier: issn: - 1540-7489 publication_status: published publisher: Elsevier BV status: public title: Experimental and kinetic modeling study of the positive ions in premixed ethylene flames over a range of equivalence ratios type: journal_article user_id: '14931' year: '2022' ... --- _id: '31330' abstract: - lang: eng text: Owing to the implementation of multi-material construction methods in modern lightweight construction and the associated use of adhesive bonding technology, thermally induced relative displacements of the joining partners occur during the curing process. The resulting extremely complex thermo-chemo-mechanical stresses can influence the properties of the adhesive layers and reduce the load-bearing capacity. In this study, experiments are conducted to examine the influence of process-related thermal relative displacements on the mechanical properties of adhesives. The results show an anisotropy of the mechanical properties of the pre-deformed adhesive layers, depending on the magnitude and direction of the relative displacement. article_number: '095440702211001' article_type: original author: - first_name: Felix full_name: Beule, Felix id: '66192' last_name: Beule - first_name: Dominik full_name: Teutenberg, Dominik id: '537' last_name: Teutenberg - first_name: Gerson full_name: Meschut, Gerson id: '32056' last_name: Meschut orcid: 0000-0002-2763-1246 citation: ama: 'Beule F, Teutenberg D, Meschut G. Directional dependence of the mechanical properties of structural adhesive joints with curing-induced pre-deformations. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering. Published online 2022. doi:10.1177/09544070221100130' apa: 'Beule, F., Teutenberg, D., & Meschut, G. (2022). Directional dependence of the mechanical properties of structural adhesive joints with curing-induced pre-deformations. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, Article 095440702211001. https://doi.org/10.1177/09544070221100130' bibtex: '@article{Beule_Teutenberg_Meschut_2022, title={Directional dependence of the mechanical properties of structural adhesive joints with curing-induced pre-deformations}, DOI={10.1177/09544070221100130}, number={095440702211001}, journal={Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering}, publisher={SAGE Publications}, author={Beule, Felix and Teutenberg, Dominik and Meschut, Gerson}, year={2022} }' chicago: 'Beule, Felix, Dominik Teutenberg, and Gerson Meschut. “Directional Dependence of the Mechanical Properties of Structural Adhesive Joints with Curing-Induced Pre-Deformations.” Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 2022. https://doi.org/10.1177/09544070221100130.' ieee: 'F. Beule, D. Teutenberg, and G. Meschut, “Directional dependence of the mechanical properties of structural adhesive joints with curing-induced pre-deformations,” Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, Art. no. 095440702211001, 2022, doi: 10.1177/09544070221100130.' mla: 'Beule, Felix, et al. “Directional Dependence of the Mechanical Properties of Structural Adhesive Joints with Curing-Induced Pre-Deformations.” Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 095440702211001, SAGE Publications, 2022, doi:10.1177/09544070221100130.' short: 'F. Beule, D. Teutenberg, G. Meschut, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering (2022).' date_created: 2022-05-19T05:26:32Z date_updated: 2023-01-17T08:26:45Z department: - _id: '157' doi: 10.1177/09544070221100130 keyword: - Mechanical Engineering - Aerospace Engineering language: - iso: eng publication: 'Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering' publication_identifier: issn: - 0954-4070 - 2041-2991 publication_status: published publisher: SAGE Publications quality_controlled: '1' status: public title: Directional dependence of the mechanical properties of structural adhesive joints with curing-induced pre-deformations type: journal_article user_id: '66192' year: '2022' ... --- _id: '36811' author: - first_name: Dennis full_name: Kaczmarek, Dennis last_name: Kaczmarek - first_name: Charlotte full_name: Rudolph, Charlotte last_name: Rudolph - first_name: Burak full_name: Atakan, Burak last_name: Atakan - first_name: Tina full_name: Kasper, Tina id: '94562' last_name: Kasper orcid: '0000-0003-3993-5316 ' citation: ama: Kaczmarek D, Rudolph C, Atakan B, Kasper T. Kinetic investigation of the ozone-assisted partial oxidation of fuel-rich natural gas mixtures at elevated pressure. Proceedings of the Combustion Institute. Published online 2022. doi:10.1016/j.proci.2022.07.195 apa: Kaczmarek, D., Rudolph, C., Atakan, B., & Kasper, T. (2022). Kinetic investigation of the ozone-assisted partial oxidation of fuel-rich natural gas mixtures at elevated pressure. Proceedings of the Combustion Institute. https://doi.org/10.1016/j.proci.2022.07.195 bibtex: '@article{Kaczmarek_Rudolph_Atakan_Kasper_2022, title={Kinetic investigation of the ozone-assisted partial oxidation of fuel-rich natural gas mixtures at elevated pressure}, DOI={10.1016/j.proci.2022.07.195}, journal={Proceedings of the Combustion Institute}, publisher={Elsevier BV}, author={Kaczmarek, Dennis and Rudolph, Charlotte and Atakan, Burak and Kasper, Tina}, year={2022} }' chicago: Kaczmarek, Dennis, Charlotte Rudolph, Burak Atakan, and Tina Kasper. “Kinetic Investigation of the Ozone-Assisted Partial Oxidation of Fuel-Rich Natural Gas Mixtures at Elevated Pressure.” Proceedings of the Combustion Institute, 2022. https://doi.org/10.1016/j.proci.2022.07.195. ieee: 'D. Kaczmarek, C. Rudolph, B. Atakan, and T. Kasper, “Kinetic investigation of the ozone-assisted partial oxidation of fuel-rich natural gas mixtures at elevated pressure,” Proceedings of the Combustion Institute, 2022, doi: 10.1016/j.proci.2022.07.195.' mla: Kaczmarek, Dennis, et al. “Kinetic Investigation of the Ozone-Assisted Partial Oxidation of Fuel-Rich Natural Gas Mixtures at Elevated Pressure.” Proceedings of the Combustion Institute, Elsevier BV, 2022, doi:10.1016/j.proci.2022.07.195. short: D. Kaczmarek, C. Rudolph, B. Atakan, T. Kasper, Proceedings of the Combustion Institute (2022). date_created: 2023-01-13T16:28:47Z date_updated: 2023-01-17T08:27:34Z department: - _id: '9' - _id: '728' doi: 10.1016/j.proci.2022.07.195 keyword: - Physical and Theoretical Chemistry - Mechanical Engineering - General Chemical Engineering language: - iso: eng publication: Proceedings of the Combustion Institute publication_identifier: issn: - 1540-7489 publication_status: published publisher: Elsevier BV status: public title: Kinetic investigation of the ozone-assisted partial oxidation of fuel-rich natural gas mixtures at elevated pressure type: journal_article user_id: '14931' year: '2022' ... --- _id: '36813' author: - first_name: Thomas full_name: Bierkandt, Thomas last_name: Bierkandt - first_name: Patrick full_name: Hemberger, Patrick last_name: Hemberger - first_name: Patrick full_name: Oßwald, Patrick last_name: Oßwald - first_name: Nina full_name: Gaiser, Nina last_name: Gaiser - first_name: Martin full_name: Hoener, Martin last_name: Hoener - first_name: Dominik full_name: Krüger, Dominik last_name: Krüger - first_name: Tina full_name: Kasper, Tina id: '94562' last_name: Kasper orcid: '0000-0003-3993-5316 ' - first_name: Markus full_name: Köhler, Markus last_name: Köhler citation: ama: Bierkandt T, Hemberger P, Oßwald P, et al. A combustion chemistry study of tetramethylethylene in a laminar premixed low-pressure hydrogen flame. Proceedings of the Combustion Institute. Published online 2022. doi:10.1016/j.proci.2022.07.205 apa: Bierkandt, T., Hemberger, P., Oßwald, P., Gaiser, N., Hoener, M., Krüger, D., Kasper, T., & Köhler, M. (2022). A combustion chemistry study of tetramethylethylene in a laminar premixed low-pressure hydrogen flame. Proceedings of the Combustion Institute. https://doi.org/10.1016/j.proci.2022.07.205 bibtex: '@article{Bierkandt_Hemberger_Oßwald_Gaiser_Hoener_Krüger_Kasper_Köhler_2022, title={A combustion chemistry study of tetramethylethylene in a laminar premixed low-pressure hydrogen flame}, DOI={10.1016/j.proci.2022.07.205}, journal={Proceedings of the Combustion Institute}, publisher={Elsevier BV}, author={Bierkandt, Thomas and Hemberger, Patrick and Oßwald, Patrick and Gaiser, Nina and Hoener, Martin and Krüger, Dominik and Kasper, Tina and Köhler, Markus}, year={2022} }' chicago: Bierkandt, Thomas, Patrick Hemberger, Patrick Oßwald, Nina Gaiser, Martin Hoener, Dominik Krüger, Tina Kasper, and Markus Köhler. “A Combustion Chemistry Study of Tetramethylethylene in a Laminar Premixed Low-Pressure Hydrogen Flame.” Proceedings of the Combustion Institute, 2022. https://doi.org/10.1016/j.proci.2022.07.205. ieee: 'T. Bierkandt et al., “A combustion chemistry study of tetramethylethylene in a laminar premixed low-pressure hydrogen flame,” Proceedings of the Combustion Institute, 2022, doi: 10.1016/j.proci.2022.07.205.' mla: Bierkandt, Thomas, et al. “A Combustion Chemistry Study of Tetramethylethylene in a Laminar Premixed Low-Pressure Hydrogen Flame.” Proceedings of the Combustion Institute, Elsevier BV, 2022, doi:10.1016/j.proci.2022.07.205. short: T. Bierkandt, P. Hemberger, P. Oßwald, N. Gaiser, M. Hoener, D. Krüger, T. Kasper, M. Köhler, Proceedings of the Combustion Institute (2022). date_created: 2023-01-13T16:29:11Z date_updated: 2023-01-17T08:28:30Z department: - _id: '9' - _id: '728' doi: 10.1016/j.proci.2022.07.205 keyword: - Physical and Theoretical Chemistry - Mechanical Engineering - General Chemical Engineering language: - iso: eng publication: Proceedings of the Combustion Institute publication_identifier: issn: - 1540-7489 publication_status: published publisher: Elsevier BV status: public title: A combustion chemistry study of tetramethylethylene in a laminar premixed low-pressure hydrogen flame type: journal_article user_id: '14931' year: '2022' ... --- _id: '33002' abstract: - lang: eng text: Many mechanical material properties show a dependence on the strain rate, e.g. yield stress or elongation at fracture. The quantitative description of the material behavior under dynamic loading is of major importance for the evaluation of crash safety. This is carried out using numerical methods and requires characteristic values for the materials used. For the standardized determination of dynamic characteristic values in sheet metal materials, tensile tests performed according to the guideline from [1]. A particular challenge in dynamic tensile tests is the force measurement during the test. For this purpose, strain gauges are attached on each specimen, wired to the measuring equipment and calibrated. This is a common way to determine a force signal that is as low in vibration and as free of bending moments as possible. The preparation effort for the used strain gauges are enormous. For these reasons, an optical method to determine the force by strain measurement using DIC is presented. The experiments are carried out on a high speed tensile testing system. In combioantion with a 3D DIC high speed system for optical strain measurement. The elastic deformation of the specimen in the dynamometric section is measured using strain gauges and the optical method. The measured signals are then compared to validate the presented method. The investigations are conducted using the dual phase steel material HCT590X and the aluminum material EN AW-6014 T4. Strain rates of up to 240 s-1 are investigated. author: - first_name: Max full_name: Böhnke, Max id: '45779' last_name: Böhnke - first_name: Eduard full_name: Unruh, Eduard id: '72763' last_name: Unruh - first_name: Stanislaw full_name: Sell, Stanislaw last_name: Sell - first_name: Mathias full_name: Bobbert, Mathias id: '7850' last_name: Bobbert - first_name: David full_name: Hein, David id: '7728' last_name: Hein - first_name: Gerson full_name: Meschut, Gerson id: '32056' last_name: Meschut orcid: 0000-0002-2763-1246 citation: ama: Böhnke M, Unruh E, Sell S, Bobbert M, Hein D, Meschut G. Functionality Study of an Optical Measurement Concept for Local Force Signal Determination in High Strain Rate Tensile Tests. Key Engineering Materials. 2022;926:1564-1572. doi:10.4028/p-wpuzyw apa: Böhnke, M., Unruh, E., Sell, S., Bobbert, M., Hein, D., & Meschut, G. (2022). Functionality Study of an Optical Measurement Concept for Local Force Signal Determination in High Strain Rate Tensile Tests. Key Engineering Materials, 926, 1564–1572. https://doi.org/10.4028/p-wpuzyw bibtex: '@article{Böhnke_Unruh_Sell_Bobbert_Hein_Meschut_2022, title={Functionality Study of an Optical Measurement Concept for Local Force Signal Determination in High Strain Rate Tensile Tests}, volume={926}, DOI={10.4028/p-wpuzyw}, journal={Key Engineering Materials}, publisher={Trans Tech Publications, Ltd.}, author={Böhnke, Max and Unruh, Eduard and Sell, Stanislaw and Bobbert, Mathias and Hein, David and Meschut, Gerson}, year={2022}, pages={1564–1572} }' chicago: 'Böhnke, Max, Eduard Unruh, Stanislaw Sell, Mathias Bobbert, David Hein, and Gerson Meschut. “Functionality Study of an Optical Measurement Concept for Local Force Signal Determination in High Strain Rate Tensile Tests.” Key Engineering Materials 926 (2022): 1564–72. https://doi.org/10.4028/p-wpuzyw.' ieee: 'M. Böhnke, E. Unruh, S. Sell, M. Bobbert, D. Hein, and G. Meschut, “Functionality Study of an Optical Measurement Concept for Local Force Signal Determination in High Strain Rate Tensile Tests,” Key Engineering Materials, vol. 926, pp. 1564–1572, 2022, doi: 10.4028/p-wpuzyw.' mla: Böhnke, Max, et al. “Functionality Study of an Optical Measurement Concept for Local Force Signal Determination in High Strain Rate Tensile Tests.” Key Engineering Materials, vol. 926, Trans Tech Publications, Ltd., 2022, pp. 1564–72, doi:10.4028/p-wpuzyw. short: M. Böhnke, E. Unruh, S. Sell, M. Bobbert, D. Hein, G. Meschut, Key Engineering Materials 926 (2022) 1564–1572. conference: location: Braga, Portugal name: ESAFORM 2022 date_created: 2022-08-18T09:33:54Z date_updated: 2023-01-17T09:02:59Z department: - _id: '157' - _id: '630' doi: 10.4028/p-wpuzyw intvolume: ' 926' keyword: - Mechanical Engineering - Mechanics of Materials - General Materials Science language: - iso: eng page: 1564-1572 project: - _id: '130' grant_number: '418701707' name: 'TRR 285: TRR 285' - _id: '131' name: 'TRR 285 - A: TRR 285 - Project Area A' - _id: '135' name: 'TRR 285 – A01: TRR 285 - Subproject A01' publication: Key Engineering Materials publication_identifier: issn: - 1662-9795 publication_status: published publisher: Trans Tech Publications, Ltd. quality_controlled: '1' status: public title: Functionality Study of an Optical Measurement Concept for Local Force Signal Determination in High Strain Rate Tensile Tests type: journal_article user_id: '45779' volume: 926 year: '2022' ...