@article{43153,
  abstract     = {{Facing a decreasing amount of resources on the one hand and an increasing demand for comfort on the other, more and more attention is being paid to sustainability and care for the environment. Particularly in the automotive sector, lightweight design principles continue to prosper rapidly. As a result, adjusted materials for different applications were developed. Due to the formation of intermetallic phases, most multi-material mixes cannot be welded and require adapted joining technologies. Mechanical joining technologies such as self-piercing riveting and mechanical clinching have proven effective methods of joining lightweight materials like aluminium and ductile steels. New high-strength steels are increasingly used in crash-sections, where limited deformation under impact load is required. These hot stamped steels have a very low elongation at break and therefore a low formability. Currently there is no joining by forming technology without pre-punching available using these grades of steels on die-side. The newly developed shear-clinching process is one possible method of joining this kind of material without additional elements. The fundamental idea of shear-clinching is a single-stage process in which pre-punching of the die-side material is performed by indirect shear-cutting and subsequent forming of the upper layer into this hole. This would immensely enlarge the application segment of mechanical clinching even if hot stamped steels are positioned on die-side. Fundamental studies are required to ensure process reliability and it is necessary to break down the joining process into fragments, like pre-punching and clinching with pre-punched sheet, and superpose them to form the combined procedure shear-clinching. This paper presents a detailed investigation of the sub-process clinching with pre-hole.}},
  author       = {{Merklein, Marion and Meschut, Gerson and Müller, Martin and Hörhold, Réjane}},
  issn         = {{1662-9795}},
  journal      = {{Key Engineering Materials}},
  keywords     = {{Mechanical Engineering, Mechanics of Materials, General Materials Science}},
  pages        = {{1413--1420}},
  publisher    = {{Trans Tech Publications, Ltd.}},
  title        = {{{Basic Investigations of Non-Pre-Punched Joining by Forming of Aluminium Alloy and High Strength Steel with Shear-Clinching Technology}}},
  doi          = {{10.4028/www.scientific.net/kem.611-612.1413}},
  volume       = {{611-612}},
  year         = {{2014}},
}

@article{43426,
  author       = {{Meschut, G. and Hahn, O. and Janzen, V. and Olfermann, T.}},
  issn         = {{0043-2288}},
  journal      = {{Welding in the World}},
  keywords     = {{Metals and Alloys, Mechanical Engineering, Mechanics of Materials}},
  number       = {{1}},
  pages        = {{65--75}},
  publisher    = {{Springer Science and Business Media LLC}},
  title        = {{{Innovative joining technologies for multi-material structures}}},
  doi          = {{10.1007/s40194-013-0098-3}},
  volume       = {{58}},
  year         = {{2013}},
}

@article{46510,
  author       = {{Hoyer, Kay-Peter and Angrisani, Gian Luigi and Klose, Christian and Bach, Friedrich-Wilhelm and Hassel, Thomas}},
  issn         = {{0933-5137}},
  journal      = {{Materialwissenschaft und Werkstofftechnik}},
  keywords     = {{Mechanical Engineering, Mechanics of Materials, Condensed Matter Physics, General Materials Science}},
  number       = {{1}},
  pages        = {{84--93}},
  publisher    = {{Wiley}},
  title        = {{{Korrosionsverhalten binärer Magnesium-Zink-Legierungen in salzhaltigen Medien}}},
  doi          = {{10.1002/mawe.201300019}},
  volume       = {{44}},
  year         = {{2013}},
}

@article{39520,
  author       = {{Brockmeier, A and Rodriguez, F J Santos and Harrison, M and Hilleringmann, Ulrich}},
  issn         = {{0960-1317}},
  journal      = {{Journal of Micromechanics and Microengineering}},
  keywords     = {{Electrical and Electronic Engineering, Mechanical Engineering, Mechanics of Materials, Electronic, Optical and Magnetic Materials}},
  number       = {{12}},
  publisher    = {{IOP Publishing}},
  title        = {{{Surface tension and its role for vertical wet etching of silicon}}},
  doi          = {{10.1088/0960-1317/22/12/125012}},
  volume       = {{22}},
  year         = {{2012}},
}

@article{39522,
  author       = {{Brockmeier, A and Rodriguez, F J Santos and Harrison, M and Hilleringmann, Ulrich}},
  issn         = {{0960-1317}},
  journal      = {{Journal of Micromechanics and Microengineering}},
  keywords     = {{Electrical and Electronic Engineering, Mechanical Engineering, Mechanics of Materials, Electronic, Optical and Magnetic Materials}},
  number       = {{12}},
  publisher    = {{IOP Publishing}},
  title        = {{{Surface tension and its role for vertical wet etching of silicon}}},
  doi          = {{10.1088/0960-1317/22/12/125012}},
  volume       = {{22}},
  year         = {{2012}},
}

@article{46512,
  author       = {{Hoyer, Kay-Peter and Hassel, Thomas and Bach, Friedrich-Wilhelm}},
  issn         = {{0933-5137}},
  journal      = {{Materialwissenschaft und Werkstofftechnik}},
  keywords     = {{Mechanical Engineering, Mechanics of Materials, Condensed Matter Physics, General Materials Science}},
  number       = {{12}},
  pages        = {{1067--1073}},
  publisher    = {{Wiley}},
  title        = {{{Einfluss der Oberflächenbehandlung auf das Korrosionsverhalten von Magnesiumlegierungen}}},
  doi          = {{10.1002/mawe.201200921}},
  volume       = {{43}},
  year         = {{2012}},
}

@article{46511,
  author       = {{Waltz, Florian and Swider, Mark A. and Hoyer, Kay-Peter and Hassel, Thomas and Erne, Martin and Möhwald, Kai and Adlung, Matthias and Feldhoff, Armin and Wickleder, Claudia and Bach, Friedrich-Wilhelm and Behrens, Peter}},
  issn         = {{0022-2461}},
  journal      = {{Journal of Materials Science}},
  keywords     = {{Mechanical Engineering, Mechanics of Materials, General Materials Science}},
  number       = {{1}},
  pages        = {{176--183}},
  publisher    = {{Springer Science and Business Media LLC}},
  title        = {{{Synthesis of highly stable magnesium fluoride suspensions and their application in the corrosion protection of a Magnesium alloy}}},
  doi          = {{10.1007/s10853-011-5785-0}},
  volume       = {{47}},
  year         = {{2011}},
}

@article{39980,
  author       = {{Lauhof, Marcus W. and Benning, Stephan A. and Kitzerow, Heinz-Siegfried and Vill, Volkmar and Scheliga, Felix and Thorn-Csányi, Emma}},
  issn         = {{0379-6779}},
  journal      = {{Synthetic Metals}},
  keywords     = {{Materials Chemistry, Metals and Alloys, Mechanical Engineering, Mechanics of Materials, Condensed Matter Physics, Electronic, Optical and Magnetic Materials}},
  number       = {{4-5}},
  pages        = {{222--227}},
  publisher    = {{Elsevier BV}},
  title        = {{{Dichroic photo- and electroluminescence of oligo p-(phenylene vinylene) derivatives}}},
  doi          = {{10.1016/j.synthmet.2007.01.015}},
  volume       = {{157}},
  year         = {{2007}},
}

@article{29682,
  author       = {{Hütten, A. and Schmalhorst, J. and Thomas, A. and Kämmerer, S. and Sacher, Marc and Ebke, D. and Liu, N.-N. and Kou, X. and Reiss, G.}},
  issn         = {{0925-8388}},
  journal      = {{Journal of Alloys and Compounds}},
  keywords     = {{Materials Chemistry, Metals and Alloys, Mechanical Engineering, Mechanics of Materials}},
  number       = {{1-2}},
  pages        = {{148--152}},
  publisher    = {{Elsevier BV}},
  title        = {{{Spin-electronic devices with half-metallic Heusler alloys}}},
  doi          = {{10.1016/j.jallcom.2005.12.106}},
  volume       = {{423}},
  year         = {{2006}},
}

@article{39846,
  abstract     = {{<jats:p>This article reports degradation experiments on organic thin film transistors using the small organic molecule pentacene as the semiconducting material. Starting with degradation inert <jats:italic>p</jats:italic>-type silicon wafers as the substrate and SiO<jats:sub>2</jats:sub> as the gate dielectric, we show the influence of temperature and exposure to ambient air on the charge carrier field-effect mobility, on-off-ratio, and threshold-voltage. The devices were found to have unambiguously degraded over 3 orders of magnitude in maximum on-current and charge carrier field-effect mobility, but they still operated after a period of 9 months in ambient air conditions. A thermal treatment was carried out in vacuum conditions and revealed a degradation of the charge carrier field-effect mobility, maximum on-current, and threshold voltage.</jats:p>}},
  author       = {{Pannemann, Ch. and Diekmann, T. and Hilleringmann, Ulrich}},
  issn         = {{0884-2914}},
  journal      = {{Journal of Materials Research}},
  keywords     = {{Mechanical Engineering, Mechanics of Materials, Condensed Matter Physics, General Materials Science}},
  number       = {{7}},
  pages        = {{1999--2002}},
  publisher    = {{Springer Science and Business Media LLC}},
  title        = {{{Degradation of organic field-effect transistors made of pentacene}}},
  doi          = {{10.1557/jmr.2004.0267}},
  volume       = {{19}},
  year         = {{2005}},
}

@article{39349,
  abstract     = {{<jats:p>This article reports degradation experiments on organic thin film transistors using the small organic molecule pentacene as the semiconducting material. Starting with degradation inert <jats:italic>p</jats:italic>-type silicon wafers as the substrate and SiO<jats:sub>2</jats:sub> as the gate dielectric, we show the influence of temperature and exposure to ambient air on the charge carrier field-effect mobility, on-off-ratio, and threshold-voltage. The devices were found to have unambiguously degraded over 3 orders of magnitude in maximum on-current and charge carrier field-effect mobility, but they still operated after a period of 9 months in ambient air conditions. A thermal treatment was carried out in vacuum conditions and revealed a degradation of the charge carrier field-effect mobility, maximum on-current, and threshold voltage.</jats:p>}},
  author       = {{Pannemann, Ch. and Diekmann, T. and Hilleringmann, Ulrich}},
  issn         = {{0884-2914}},
  journal      = {{Journal of Materials Research}},
  keywords     = {{Mechanical Engineering, Mechanics of Materials, Condensed Matter Physics, General Materials Science}},
  number       = {{7}},
  pages        = {{1999--2002}},
  publisher    = {{Springer Science and Business Media LLC}},
  title        = {{{Degradation of organic field-effect transistors made of pentacene}}},
  doi          = {{10.1557/jmr.2004.0267}},
  volume       = {{19}},
  year         = {{2005}},
}

@article{35359,
  author       = {{Cormier, Ryan J. and Schmidt, Claudia and Callaghan, Paul T.}},
  issn         = {{0148-6055}},
  journal      = {{Journal of Rheology}},
  keywords     = {{Mechanical Engineering, Mechanics of Materials, Condensed Matter Physics, General Materials Science}},
  number       = {{4}},
  pages        = {{881--894}},
  publisher    = {{Society of Rheology}},
  title        = {{{Director reorientation of a side-chain liquid crystalline polymer under extensional flow}}},
  doi          = {{10.1122/1.1753278}},
  volume       = {{48}},
  year         = {{2004}},
}

@article{39985,
  author       = {{Röder, T and Kitzerow, Heinz-Siegfried and Hummelen, J.C}},
  issn         = {{0379-6779}},
  journal      = {{Synthetic Metals}},
  keywords     = {{Materials Chemistry, Metals and Alloys, Mechanical Engineering, Mechanics of Materials, Condensed Matter Physics, Electronic, Optical and Magnetic Materials}},
  number       = {{3}},
  pages        = {{271--275}},
  publisher    = {{Elsevier BV}},
  title        = {{{Morphology and fluorescence quenching in photovoltaic samples containing fullerene and poly(p-phenylene-vinylene) derivatives}}},
  doi          = {{10.1016/s0379-6779(03)00412-0}},
  volume       = {{141}},
  year         = {{2003}},
}

@article{45307,
  author       = {{Mahnken, Rolf}},
  issn         = {{0045-7825}},
  journal      = {{Computer Methods in Applied Mechanics and Engineering}},
  keywords     = {{Computer Science Applications, General Physics and Astronomy, Mechanical Engineering, Mechanics of Materials, Computational Mechanics}},
  number       = {{39}},
  pages        = {{5057--5080}},
  publisher    = {{Elsevier BV}},
  title        = {{{Strength difference in compression and tension and pressure dependence of yielding in elasto-plasticity}}},
  doi          = {{10.1016/s0045-7825(00)00364-9}},
  volume       = {{190}},
  year         = {{2002}},
}

@article{45413,
  author       = {{Mahnken, Rolf and Steinmann, P.}},
  issn         = {{0363-9061}},
  journal      = {{International Journal for Numerical and Analytical Methods in Geomechanics}},
  keywords     = {{Mechanics of Materials, Geotechnical Engineering and Engineering Geology, General Materials Science, Computational Mechanics}},
  number       = {{5}},
  pages        = {{415--434}},
  publisher    = {{Wiley}},
  title        = {{{A finite element algorithm for parameter identification of material models for fluid saturated porous media}}},
  doi          = {{10.1002/nag.136}},
  volume       = {{25}},
  year         = {{2002}},
}

@article{45412,
  author       = {{Mahnken, Rolf and Kohlmeier, M.}},
  issn         = {{0045-7825}},
  journal      = {{Computer Methods in Applied Mechanics and Engineering}},
  keywords     = {{Computer Science Applications, General Physics and Astronomy, Mechanical Engineering, Mechanics of Materials, Computational Mechanics}},
  number       = {{32-33}},
  pages        = {{4259--4278}},
  publisher    = {{Elsevier BV}},
  title        = {{{Finite element simulation for rock salt with dilatancy boundary coupled to fluid permeation}}},
  doi          = {{10.1016/s0045-7825(00)00317-0}},
  volume       = {{190}},
  year         = {{2002}},
}

@article{45424,
  author       = {{Mahnken, Rolf and Kuhl, Ellen}},
  issn         = {{0997-7538}},
  journal      = {{European Journal of Mechanics - A/Solids}},
  keywords     = {{General Physics and Astronomy, Mechanical Engineering, Mechanics of Materials, General Materials Science}},
  number       = {{5}},
  pages        = {{819--835}},
  publisher    = {{Elsevier BV}},
  title        = {{{Parameter identification of gradient enhanced damage models with the finite element method}}},
  doi          = {{10.1016/s0997-7538(99)00127-8}},
  volume       = {{18}},
  year         = {{2002}},
}

@article{45429,
  author       = {{Mahnken, Rolf and Stein, Erwin}},
  issn         = {{0045-7825}},
  journal      = {{Computer Methods in Applied Mechanics and Engineering}},
  keywords     = {{Computer Science Applications, General Physics and Astronomy, Mechanical Engineering, Mechanics of Materials, Computational Mechanics}},
  number       = {{3-4}},
  pages        = {{225--258}},
  publisher    = {{Elsevier BV}},
  title        = {{{A unified approach for parameter identification of inelastic material models in the frame of the finite element method}}},
  doi          = {{10.1016/0045-7825(96)00991-7}},
  volume       = {{136}},
  year         = {{2002}},
}

@article{45432,
  author       = {{Mahnken, Rolf and Stein, E}},
  issn         = {{0965-0393}},
  journal      = {{Modelling and Simulation in Materials Science and Engineering}},
  keywords     = {{Computer Science Applications, Mechanics of Materials, Condensed Matter Physics, General Materials Science, Modeling and Simulation}},
  number       = {{3A}},
  pages        = {{597--616}},
  publisher    = {{IOP Publishing}},
  title        = {{{The identification of parameters for visco-plastic models via finite-element methods and gradient methods}}},
  doi          = {{10.1088/0965-0393/2/3a/013}},
  volume       = {{2}},
  year         = {{2002}},
}

@article{45430,
  author       = {{Mahnken, Rolf and Stein, Erwin}},
  issn         = {{0749-6419}},
  journal      = {{International Journal of Plasticity}},
  keywords     = {{Mechanical Engineering, Mechanics of Materials, General Materials Science}},
  number       = {{4}},
  pages        = {{451--479}},
  publisher    = {{Elsevier BV}},
  title        = {{{Parameter identification for viscoplastic models based on analytical derivatives of a least-squares functional and stability investigations}}},
  doi          = {{10.1016/s0749-6419(95)00016-x}},
  volume       = {{12}},
  year         = {{2002}},
}