[{"year":"2014","title":"Basic Investigations of Non-Pre-Punched Joining by Forming of Aluminium Alloy and High Strength Steel with Shear-Clinching Technology","author":[{"last_name":"Merklein","first_name":"Marion","full_name":"Merklein, Marion"},{"full_name":"Meschut, Gerson","last_name":"Meschut","first_name":"Gerson"},{"full_name":"Müller, Martin","first_name":"Martin","last_name":"Müller"},{"first_name":"Réjane","last_name":"Hörhold","full_name":"Hörhold, Réjane"}],"publication_identifier":{"issn":["1662-9795"]},"publication_status":"published","date_updated":"2023-03-29T08:08:49Z","language":[{"iso":"eng"}],"doi":"10.4028/www.scientific.net/kem.611-612.1413","publication":"Key Engineering Materials","abstract":[{"text":"Facing a decreasing amount of resources on the one hand and an increasing demand for comfort on the other, more and more attention is being paid to sustainability and care for the environment. Particularly in the automotive sector, lightweight design principles continue to prosper rapidly. As a result, adjusted materials for different applications were developed. Due to the formation of intermetallic phases, most multi-material mixes cannot be welded and require adapted joining technologies. Mechanical joining technologies such as self-piercing riveting and mechanical clinching have proven effective methods of joining lightweight materials like aluminium and ductile steels. New high-strength steels are increasingly used in crash-sections, where limited deformation under impact load is required. These hot stamped steels have a very low elongation at break and therefore a low formability. Currently there is no joining by forming technology without pre-punching available using these grades of steels on die-side. The newly developed shear-clinching process is one possible method of joining this kind of material without additional elements. The fundamental idea of shear-clinching is a single-stage process in which pre-punching of the die-side material is performed by indirect shear-cutting and subsequent forming of the upper layer into this hole. This would immensely enlarge the application segment of mechanical clinching even if hot stamped steels are positioned on die-side. Fundamental studies are required to ensure process reliability and it is necessary to break down the joining process into fragments, like pre-punching and clinching with pre-punched sheet, and superpose them to form the combined procedure shear-clinching. This paper presents a detailed investigation of the sub-process clinching with pre-hole.","lang":"eng"}],"date_created":"2023-03-29T08:06:09Z","keyword":["Mechanical Engineering","Mechanics of Materials","General Materials Science"],"type":"journal_article","department":[{"_id":"157"}],"status":"public","page":"1413-1420","_id":"43153","publisher":"Trans Tech Publications, Ltd.","user_id":"53912","volume":"611-612","citation":{"apa":"Merklein, M., Meschut, G., Müller, M., &#38; Hörhold, R. (2014). Basic Investigations of Non-Pre-Punched Joining by Forming of Aluminium Alloy and High Strength Steel with Shear-Clinching Technology. <i>Key Engineering Materials</i>, <i>611–612</i>, 1413–1420. <a href=\"https://doi.org/10.4028/www.scientific.net/kem.611-612.1413\">https://doi.org/10.4028/www.scientific.net/kem.611-612.1413</a>","ieee":"M. Merklein, G. Meschut, M. Müller, and R. Hörhold, “Basic Investigations of Non-Pre-Punched Joining by Forming of Aluminium Alloy and High Strength Steel with Shear-Clinching Technology,” <i>Key Engineering Materials</i>, vol. 611–612, pp. 1413–1420, 2014, doi: <a href=\"https://doi.org/10.4028/www.scientific.net/kem.611-612.1413\">10.4028/www.scientific.net/kem.611-612.1413</a>.","short":"M. Merklein, G. Meschut, M. Müller, R. Hörhold, Key Engineering Materials 611–612 (2014) 1413–1420.","chicago":"Merklein, Marion, Gerson Meschut, Martin Müller, and Réjane Hörhold. “Basic Investigations of Non-Pre-Punched Joining by Forming of Aluminium Alloy and High Strength Steel with Shear-Clinching Technology.” <i>Key Engineering Materials</i> 611–612 (2014): 1413–20. <a href=\"https://doi.org/10.4028/www.scientific.net/kem.611-612.1413\">https://doi.org/10.4028/www.scientific.net/kem.611-612.1413</a>.","mla":"Merklein, Marion, et al. “Basic Investigations of Non-Pre-Punched Joining by Forming of Aluminium Alloy and High Strength Steel with Shear-Clinching Technology.” <i>Key Engineering Materials</i>, vol. 611–612, Trans Tech Publications, Ltd., 2014, pp. 1413–20, doi:<a href=\"https://doi.org/10.4028/www.scientific.net/kem.611-612.1413\">10.4028/www.scientific.net/kem.611-612.1413</a>.","ama":"Merklein M, Meschut G, Müller M, Hörhold R. Basic Investigations of Non-Pre-Punched Joining by Forming of Aluminium Alloy and High Strength Steel with Shear-Clinching Technology. <i>Key Engineering Materials</i>. 2014;611-612:1413-1420. doi:<a href=\"https://doi.org/10.4028/www.scientific.net/kem.611-612.1413\">10.4028/www.scientific.net/kem.611-612.1413</a>","bibtex":"@article{Merklein_Meschut_Müller_Hörhold_2014, title={Basic Investigations of Non-Pre-Punched Joining by Forming of Aluminium Alloy and High Strength Steel with Shear-Clinching Technology}, volume={611–612}, DOI={<a href=\"https://doi.org/10.4028/www.scientific.net/kem.611-612.1413\">10.4028/www.scientific.net/kem.611-612.1413</a>}, journal={Key Engineering Materials}, publisher={Trans Tech Publications, Ltd.}, author={Merklein, Marion and Meschut, Gerson and Müller, Martin and Hörhold, Réjane}, year={2014}, pages={1413–1420} }"}},{"language":[{"iso":"eng"}],"doi":"10.1007/s40194-013-0098-3","author":[{"full_name":"Meschut, G.","first_name":"G.","last_name":"Meschut"},{"first_name":"O.","last_name":"Hahn","full_name":"Hahn, O."},{"last_name":"Janzen","first_name":"V.","full_name":"Janzen, V."},{"first_name":"T.","last_name":"Olfermann","full_name":"Olfermann, T."}],"publication_identifier":{"issn":["0043-2288","1878-6669"]},"year":"2013","title":"Innovative joining technologies for multi-material structures","intvolume":"        58","date_updated":"2023-04-06T09:14:41Z","publication_status":"published","date_created":"2023-04-06T09:14:20Z","department":[{"_id":"157"}],"keyword":["Metals and Alloys","Mechanical Engineering","Mechanics of Materials"],"type":"journal_article","issue":"1","publication":"Welding in the World","_id":"43426","publisher":"Springer Science and Business Media LLC","page":"65-75","volume":58,"user_id":"53912","status":"public","citation":{"bibtex":"@article{Meschut_Hahn_Janzen_Olfermann_2013, title={Innovative joining technologies for multi-material structures}, volume={58}, DOI={<a href=\"https://doi.org/10.1007/s40194-013-0098-3\">10.1007/s40194-013-0098-3</a>}, number={1}, journal={Welding in the World}, publisher={Springer Science and Business Media LLC}, author={Meschut, G. and Hahn, O. and Janzen, V. and Olfermann, T.}, year={2013}, pages={65–75} }","ama":"Meschut G, Hahn O, Janzen V, Olfermann T. Innovative joining technologies for multi-material structures. <i>Welding in the World</i>. 2013;58(1):65-75. doi:<a href=\"https://doi.org/10.1007/s40194-013-0098-3\">10.1007/s40194-013-0098-3</a>","mla":"Meschut, G., et al. “Innovative Joining Technologies for Multi-Material Structures.” <i>Welding in the World</i>, vol. 58, no. 1, Springer Science and Business Media LLC, 2013, pp. 65–75, doi:<a href=\"https://doi.org/10.1007/s40194-013-0098-3\">10.1007/s40194-013-0098-3</a>.","chicago":"Meschut, G., O. Hahn, V. Janzen, and T. Olfermann. “Innovative Joining Technologies for Multi-Material Structures.” <i>Welding in the World</i> 58, no. 1 (2013): 65–75. <a href=\"https://doi.org/10.1007/s40194-013-0098-3\">https://doi.org/10.1007/s40194-013-0098-3</a>.","short":"G. Meschut, O. Hahn, V. Janzen, T. Olfermann, Welding in the World 58 (2013) 65–75.","ieee":"G. Meschut, O. Hahn, V. Janzen, and T. Olfermann, “Innovative joining technologies for multi-material structures,” <i>Welding in the World</i>, vol. 58, no. 1, pp. 65–75, 2013, doi: <a href=\"https://doi.org/10.1007/s40194-013-0098-3\">10.1007/s40194-013-0098-3</a>.","apa":"Meschut, G., Hahn, O., Janzen, V., &#38; Olfermann, T. (2013). Innovative joining technologies for multi-material structures. <i>Welding in the World</i>, <i>58</i>(1), 65–75. <a href=\"https://doi.org/10.1007/s40194-013-0098-3\">https://doi.org/10.1007/s40194-013-0098-3</a>"}},{"citation":{"mla":"Hoyer, Kay-Peter, et al. “Korrosionsverhalten Binärer Magnesium-Zink-Legierungen in Salzhaltigen Medien.” <i>Materialwissenschaft Und Werkstofftechnik</i>, vol. 44, no. 1, Wiley, 2013, pp. 84–93, doi:<a href=\"https://doi.org/10.1002/mawe.201300019\">10.1002/mawe.201300019</a>.","bibtex":"@article{Hoyer_Angrisani_Klose_Bach_Hassel_2013, title={Korrosionsverhalten binärer Magnesium-Zink-Legierungen in salzhaltigen Medien}, volume={44}, DOI={<a href=\"https://doi.org/10.1002/mawe.201300019\">10.1002/mawe.201300019</a>}, number={1}, journal={Materialwissenschaft und Werkstofftechnik}, publisher={Wiley}, author={Hoyer, Kay-Peter and Angrisani, Gian Luigi and Klose, Christian and Bach, Friedrich-Wilhelm and Hassel, Thomas}, year={2013}, pages={84–93} }","ama":"Hoyer K-P, Angrisani GL, Klose C, Bach F-W, Hassel T. Korrosionsverhalten binärer Magnesium-Zink-Legierungen in salzhaltigen Medien. <i>Materialwissenschaft und Werkstofftechnik</i>. 2013;44(1):84-93. doi:<a href=\"https://doi.org/10.1002/mawe.201300019\">10.1002/mawe.201300019</a>","ieee":"K.-P. Hoyer, G. L. Angrisani, C. Klose, F.-W. Bach, and T. Hassel, “Korrosionsverhalten binärer Magnesium-Zink-Legierungen in salzhaltigen Medien,” <i>Materialwissenschaft und Werkstofftechnik</i>, vol. 44, no. 1, pp. 84–93, 2013, doi: <a href=\"https://doi.org/10.1002/mawe.201300019\">10.1002/mawe.201300019</a>.","apa":"Hoyer, K.-P., Angrisani, G. L., Klose, C., Bach, F.-W., &#38; Hassel, T. (2013). Korrosionsverhalten binärer Magnesium-Zink-Legierungen in salzhaltigen Medien. <i>Materialwissenschaft Und Werkstofftechnik</i>, <i>44</i>(1), 84–93. <a href=\"https://doi.org/10.1002/mawe.201300019\">https://doi.org/10.1002/mawe.201300019</a>","short":"K.-P. Hoyer, G.L. Angrisani, C. Klose, F.-W. Bach, T. Hassel, Materialwissenschaft Und Werkstofftechnik 44 (2013) 84–93.","chicago":"Hoyer, Kay-Peter, Gian Luigi Angrisani, Christian Klose, Friedrich-Wilhelm Bach, and Thomas Hassel. “Korrosionsverhalten Binärer Magnesium-Zink-Legierungen in Salzhaltigen Medien.” <i>Materialwissenschaft Und Werkstofftechnik</i> 44, no. 1 (2013): 84–93. <a href=\"https://doi.org/10.1002/mawe.201300019\">https://doi.org/10.1002/mawe.201300019</a>."},"quality_controlled":"1","status":"public","page":"84-93","_id":"46510","publisher":"Wiley","user_id":"48411","volume":44,"publication":"Materialwissenschaft und Werkstofftechnik","issue":"1","extern":"1","date_created":"2023-08-16T06:41:45Z","keyword":["Mechanical Engineering","Mechanics of Materials","Condensed Matter Physics","General Materials Science"],"type":"journal_article","department":[{"_id":"9"},{"_id":"158"}],"year":"2013","title":"Korrosionsverhalten binärer Magnesium-Zink-Legierungen in salzhaltigen Medien","author":[{"id":"48411","last_name":"Hoyer","first_name":"Kay-Peter","full_name":"Hoyer, Kay-Peter"},{"full_name":"Angrisani, Gian Luigi","last_name":"Angrisani","first_name":"Gian Luigi"},{"last_name":"Klose","first_name":"Christian","full_name":"Klose, Christian"},{"full_name":"Bach, Friedrich-Wilhelm","last_name":"Bach","first_name":"Friedrich-Wilhelm"},{"last_name":"Hassel","first_name":"Thomas","full_name":"Hassel, Thomas"}],"publication_identifier":{"issn":["0933-5137"]},"date_updated":"2023-08-16T06:43:56Z","publication_status":"published","intvolume":"        44","language":[{"iso":"eng"}],"doi":"10.1002/mawe.201300019"},{"publication_identifier":{"issn":["0960-1317","1361-6439"]},"author":[{"full_name":"Brockmeier, A","last_name":"Brockmeier","first_name":"A"},{"full_name":"Rodriguez, F J Santos","last_name":"Rodriguez","first_name":"F J Santos"},{"full_name":"Harrison, M","last_name":"Harrison","first_name":"M"},{"full_name":"Hilleringmann, Ulrich","first_name":"Ulrich","last_name":"Hilleringmann","id":"20179"}],"year":"2012","title":"Surface tension and its role for vertical wet etching of silicon","intvolume":"        22","date_updated":"2023-03-21T10:19:17Z","publication_status":"published","language":[{"iso":"eng"}],"article_number":"125012","doi":"10.1088/0960-1317/22/12/125012","issue":"12","publication":"Journal of Micromechanics and Microengineering","date_created":"2023-01-24T11:54:26Z","department":[{"_id":"59"}],"type":"journal_article","keyword":["Electrical and Electronic Engineering","Mechanical Engineering","Mechanics of Materials","Electronic","Optical and Magnetic Materials"],"status":"public","_id":"39520","publisher":"IOP Publishing","volume":22,"user_id":"20179","citation":{"mla":"Brockmeier, A., et al. “Surface Tension and Its Role for Vertical Wet Etching of Silicon.” <i>Journal of Micromechanics and Microengineering</i>, vol. 22, no. 12, 125012, IOP Publishing, 2012, doi:<a href=\"https://doi.org/10.1088/0960-1317/22/12/125012\">10.1088/0960-1317/22/12/125012</a>.","bibtex":"@article{Brockmeier_Rodriguez_Harrison_Hilleringmann_2012, title={Surface tension and its role for vertical wet etching of silicon}, volume={22}, DOI={<a href=\"https://doi.org/10.1088/0960-1317/22/12/125012\">10.1088/0960-1317/22/12/125012</a>}, number={12125012}, journal={Journal of Micromechanics and Microengineering}, publisher={IOP Publishing}, author={Brockmeier, A and Rodriguez, F J Santos and Harrison, M and Hilleringmann, Ulrich}, year={2012} }","ama":"Brockmeier A, Rodriguez FJS, Harrison M, Hilleringmann U. Surface tension and its role for vertical wet etching of silicon. <i>Journal of Micromechanics and Microengineering</i>. 2012;22(12). doi:<a href=\"https://doi.org/10.1088/0960-1317/22/12/125012\">10.1088/0960-1317/22/12/125012</a>","ieee":"A. Brockmeier, F. J. S. Rodriguez, M. Harrison, and U. Hilleringmann, “Surface tension and its role for vertical wet etching of silicon,” <i>Journal of Micromechanics and Microengineering</i>, vol. 22, no. 12, Art. no. 125012, 2012, doi: <a href=\"https://doi.org/10.1088/0960-1317/22/12/125012\">10.1088/0960-1317/22/12/125012</a>.","apa":"Brockmeier, A., Rodriguez, F. J. S., Harrison, M., &#38; Hilleringmann, U. (2012). Surface tension and its role for vertical wet etching of silicon. <i>Journal of Micromechanics and Microengineering</i>, <i>22</i>(12), Article 125012. <a href=\"https://doi.org/10.1088/0960-1317/22/12/125012\">https://doi.org/10.1088/0960-1317/22/12/125012</a>","short":"A. Brockmeier, F.J.S. Rodriguez, M. Harrison, U. Hilleringmann, Journal of Micromechanics and Microengineering 22 (2012).","chicago":"Brockmeier, A, F J Santos Rodriguez, M Harrison, and Ulrich Hilleringmann. “Surface Tension and Its Role for Vertical Wet Etching of Silicon.” <i>Journal of Micromechanics and Microengineering</i> 22, no. 12 (2012). <a href=\"https://doi.org/10.1088/0960-1317/22/12/125012\">https://doi.org/10.1088/0960-1317/22/12/125012</a>."}},{"citation":{"ama":"Brockmeier A, Rodriguez FJS, Harrison M, Hilleringmann U. Surface tension and its role for vertical wet etching of silicon. <i>Journal of Micromechanics and Microengineering</i>. 2012;22(12). doi:<a href=\"https://doi.org/10.1088/0960-1317/22/12/125012\">10.1088/0960-1317/22/12/125012</a>","bibtex":"@article{Brockmeier_Rodriguez_Harrison_Hilleringmann_2012, title={Surface tension and its role for vertical wet etching of silicon}, volume={22}, DOI={<a href=\"https://doi.org/10.1088/0960-1317/22/12/125012\">10.1088/0960-1317/22/12/125012</a>}, number={12125012}, journal={Journal of Micromechanics and Microengineering}, publisher={IOP Publishing}, author={Brockmeier, A and Rodriguez, F J Santos and Harrison, M and Hilleringmann, Ulrich}, year={2012} }","mla":"Brockmeier, A., et al. “Surface Tension and Its Role for Vertical Wet Etching of Silicon.” <i>Journal of Micromechanics and Microengineering</i>, vol. 22, no. 12, 125012, IOP Publishing, 2012, doi:<a href=\"https://doi.org/10.1088/0960-1317/22/12/125012\">10.1088/0960-1317/22/12/125012</a>.","short":"A. Brockmeier, F.J.S. Rodriguez, M. Harrison, U. Hilleringmann, Journal of Micromechanics and Microengineering 22 (2012).","chicago":"Brockmeier, A, F J Santos Rodriguez, M Harrison, and Ulrich Hilleringmann. “Surface Tension and Its Role for Vertical Wet Etching of Silicon.” <i>Journal of Micromechanics and Microengineering</i> 22, no. 12 (2012). <a href=\"https://doi.org/10.1088/0960-1317/22/12/125012\">https://doi.org/10.1088/0960-1317/22/12/125012</a>.","apa":"Brockmeier, A., Rodriguez, F. J. S., Harrison, M., &#38; Hilleringmann, U. (2012). Surface tension and its role for vertical wet etching of silicon. <i>Journal of Micromechanics and Microengineering</i>, <i>22</i>(12), Article 125012. <a href=\"https://doi.org/10.1088/0960-1317/22/12/125012\">https://doi.org/10.1088/0960-1317/22/12/125012</a>","ieee":"A. Brockmeier, F. J. S. Rodriguez, M. Harrison, and U. Hilleringmann, “Surface tension and its role for vertical wet etching of silicon,” <i>Journal of Micromechanics and Microengineering</i>, vol. 22, no. 12, Art. no. 125012, 2012, doi: <a href=\"https://doi.org/10.1088/0960-1317/22/12/125012\">10.1088/0960-1317/22/12/125012</a>."},"publisher":"IOP Publishing","_id":"39522","volume":22,"user_id":"20179","status":"public","date_created":"2023-01-24T11:54:56Z","department":[{"_id":"59"}],"keyword":["Electrical and Electronic Engineering","Mechanical Engineering","Mechanics of Materials","Electronic","Optical and Magnetic Materials"],"type":"journal_article","publication":"Journal of Micromechanics and Microengineering","issue":"12","language":[{"iso":"eng"}],"article_number":"125012","doi":"10.1088/0960-1317/22/12/125012","author":[{"last_name":"Brockmeier","first_name":"A","full_name":"Brockmeier, A"},{"full_name":"Rodriguez, F J Santos","last_name":"Rodriguez","first_name":"F J Santos"},{"full_name":"Harrison, M","first_name":"M","last_name":"Harrison"},{"id":"20179","last_name":"Hilleringmann","first_name":"Ulrich","full_name":"Hilleringmann, Ulrich"}],"publication_identifier":{"issn":["0960-1317","1361-6439"]},"title":"Surface tension and its role for vertical wet etching of silicon","year":"2012","intvolume":"        22","publication_status":"published","date_updated":"2023-03-21T10:19:32Z"},{"quality_controlled":"1","citation":{"bibtex":"@article{Hoyer_Hassel_Bach_2012, title={Einfluss der Oberflächenbehandlung auf das Korrosionsverhalten von Magnesiumlegierungen}, volume={43}, DOI={<a href=\"https://doi.org/10.1002/mawe.201200921\">10.1002/mawe.201200921</a>}, number={12}, journal={Materialwissenschaft und Werkstofftechnik}, publisher={Wiley}, author={Hoyer, Kay-Peter and Hassel, Thomas and Bach, Friedrich-Wilhelm}, year={2012}, pages={1067–1073} }","ama":"Hoyer K-P, Hassel T, Bach F-W. Einfluss der Oberflächenbehandlung auf das Korrosionsverhalten von Magnesiumlegierungen. <i>Materialwissenschaft und Werkstofftechnik</i>. 2012;43(12):1067-1073. doi:<a href=\"https://doi.org/10.1002/mawe.201200921\">10.1002/mawe.201200921</a>","mla":"Hoyer, Kay-Peter, et al. “Einfluss Der Oberflächenbehandlung Auf Das Korrosionsverhalten von Magnesiumlegierungen.” <i>Materialwissenschaft Und Werkstofftechnik</i>, vol. 43, no. 12, Wiley, 2012, pp. 1067–73, doi:<a href=\"https://doi.org/10.1002/mawe.201200921\">10.1002/mawe.201200921</a>.","short":"K.-P. Hoyer, T. Hassel, F.-W. Bach, Materialwissenschaft Und Werkstofftechnik 43 (2012) 1067–1073.","chicago":"Hoyer, Kay-Peter, Thomas Hassel, and Friedrich-Wilhelm Bach. “Einfluss Der Oberflächenbehandlung Auf Das Korrosionsverhalten von Magnesiumlegierungen.” <i>Materialwissenschaft Und Werkstofftechnik</i> 43, no. 12 (2012): 1067–73. <a href=\"https://doi.org/10.1002/mawe.201200921\">https://doi.org/10.1002/mawe.201200921</a>.","ieee":"K.-P. Hoyer, T. Hassel, and F.-W. Bach, “Einfluss der Oberflächenbehandlung auf das Korrosionsverhalten von Magnesiumlegierungen,” <i>Materialwissenschaft und Werkstofftechnik</i>, vol. 43, no. 12, pp. 1067–1073, 2012, doi: <a href=\"https://doi.org/10.1002/mawe.201200921\">10.1002/mawe.201200921</a>.","apa":"Hoyer, K.-P., Hassel, T., &#38; Bach, F.-W. (2012). Einfluss der Oberflächenbehandlung auf das Korrosionsverhalten von Magnesiumlegierungen. <i>Materialwissenschaft Und Werkstofftechnik</i>, <i>43</i>(12), 1067–1073. <a href=\"https://doi.org/10.1002/mawe.201200921\">https://doi.org/10.1002/mawe.201200921</a>"},"volume":43,"user_id":"48411","publisher":"Wiley","_id":"46512","page":"1067-1073","status":"public","department":[{"_id":"9"},{"_id":"158"}],"type":"journal_article","keyword":["Mechanical Engineering","Mechanics of Materials","Condensed Matter Physics","General Materials Science"],"date_created":"2023-08-16T06:53:04Z","extern":"1","publication":"Materialwissenschaft und Werkstofftechnik","issue":"12","doi":"10.1002/mawe.201200921","language":[{"iso":"eng"}],"intvolume":"        43","publication_status":"published","date_updated":"2023-08-16T07:00:17Z","author":[{"id":"48411","full_name":"Hoyer, Kay-Peter","first_name":"Kay-Peter","last_name":"Hoyer"},{"last_name":"Hassel","first_name":"Thomas","full_name":"Hassel, Thomas"},{"full_name":"Bach, Friedrich-Wilhelm","first_name":"Friedrich-Wilhelm","last_name":"Bach"}],"publication_identifier":{"issn":["0933-5137"]},"title":"Einfluss der Oberflächenbehandlung auf das Korrosionsverhalten von Magnesiumlegierungen","year":"2012"},{"_id":"46511","publisher":"Springer Science and Business Media LLC","page":"176-183","volume":47,"user_id":"48411","status":"public","citation":{"bibtex":"@article{Waltz_Swider_Hoyer_Hassel_Erne_Möhwald_Adlung_Feldhoff_Wickleder_Bach_et al._2011, title={Synthesis of highly stable magnesium fluoride suspensions and their application in the corrosion protection of a Magnesium alloy}, volume={47}, DOI={<a href=\"https://doi.org/10.1007/s10853-011-5785-0\">10.1007/s10853-011-5785-0</a>}, number={1}, journal={Journal of Materials Science}, publisher={Springer Science and Business Media LLC}, author={Waltz, Florian and Swider, Mark A. and Hoyer, Kay-Peter and Hassel, Thomas and Erne, Martin and Möhwald, Kai and Adlung, Matthias and Feldhoff, Armin and Wickleder, Claudia and Bach, Friedrich-Wilhelm and et al.}, year={2011}, pages={176–183} }","ama":"Waltz F, Swider MA, Hoyer K-P, et al. Synthesis of highly stable magnesium fluoride suspensions and their application in the corrosion protection of a Magnesium alloy. <i>Journal of Materials Science</i>. 2011;47(1):176-183. doi:<a href=\"https://doi.org/10.1007/s10853-011-5785-0\">10.1007/s10853-011-5785-0</a>","mla":"Waltz, Florian, et al. “Synthesis of Highly Stable Magnesium Fluoride Suspensions and Their Application in the Corrosion Protection of a Magnesium Alloy.” <i>Journal of Materials Science</i>, vol. 47, no. 1, Springer Science and Business Media LLC, 2011, pp. 176–83, doi:<a href=\"https://doi.org/10.1007/s10853-011-5785-0\">10.1007/s10853-011-5785-0</a>.","short":"F. Waltz, M.A. Swider, K.-P. Hoyer, T. Hassel, M. Erne, K. Möhwald, M. Adlung, A. Feldhoff, C. Wickleder, F.-W. Bach, P. Behrens, Journal of Materials Science 47 (2011) 176–183.","chicago":"Waltz, Florian, Mark A. Swider, Kay-Peter Hoyer, Thomas Hassel, Martin Erne, Kai Möhwald, Matthias Adlung, et al. “Synthesis of Highly Stable Magnesium Fluoride Suspensions and Their Application in the Corrosion Protection of a Magnesium Alloy.” <i>Journal of Materials Science</i> 47, no. 1 (2011): 176–83. <a href=\"https://doi.org/10.1007/s10853-011-5785-0\">https://doi.org/10.1007/s10853-011-5785-0</a>.","ieee":"F. Waltz <i>et al.</i>, “Synthesis of highly stable magnesium fluoride suspensions and their application in the corrosion protection of a Magnesium alloy,” <i>Journal of Materials Science</i>, vol. 47, no. 1, pp. 176–183, 2011, doi: <a href=\"https://doi.org/10.1007/s10853-011-5785-0\">10.1007/s10853-011-5785-0</a>.","apa":"Waltz, F., Swider, M. A., Hoyer, K.-P., Hassel, T., Erne, M., Möhwald, K., Adlung, M., Feldhoff, A., Wickleder, C., Bach, F.-W., &#38; Behrens, P. (2011). Synthesis of highly stable magnesium fluoride suspensions and their application in the corrosion protection of a Magnesium alloy. <i>Journal of Materials Science</i>, <i>47</i>(1), 176–183. <a href=\"https://doi.org/10.1007/s10853-011-5785-0\">https://doi.org/10.1007/s10853-011-5785-0</a>"},"quality_controlled":"1","language":[{"iso":"eng"}],"doi":"10.1007/s10853-011-5785-0","author":[{"last_name":"Waltz","first_name":"Florian","full_name":"Waltz, Florian"},{"last_name":"Swider","first_name":"Mark A.","full_name":"Swider, Mark A."},{"first_name":"Kay-Peter","last_name":"Hoyer","full_name":"Hoyer, Kay-Peter","id":"48411"},{"full_name":"Hassel, Thomas","last_name":"Hassel","first_name":"Thomas"},{"full_name":"Erne, Martin","last_name":"Erne","first_name":"Martin"},{"first_name":"Kai","last_name":"Möhwald","full_name":"Möhwald, Kai"},{"last_name":"Adlung","first_name":"Matthias","full_name":"Adlung, Matthias"},{"full_name":"Feldhoff, Armin","last_name":"Feldhoff","first_name":"Armin"},{"last_name":"Wickleder","first_name":"Claudia","full_name":"Wickleder, Claudia"},{"full_name":"Bach, Friedrich-Wilhelm","last_name":"Bach","first_name":"Friedrich-Wilhelm"},{"full_name":"Behrens, Peter","first_name":"Peter","last_name":"Behrens"}],"publication_identifier":{"issn":["0022-2461","1573-4803"]},"year":"2011","title":"Synthesis of highly stable magnesium fluoride suspensions and their application in the corrosion protection of a Magnesium alloy","intvolume":"        47","publication_status":"published","date_updated":"2023-08-16T07:00:20Z","date_created":"2023-08-16T06:47:15Z","department":[{"_id":"9"},{"_id":"158"}],"type":"journal_article","keyword":["Mechanical Engineering","Mechanics of Materials","General Materials Science"],"publication":"Journal of Materials Science","issue":"1","extern":"1"},{"intvolume":"       157","publication_status":"published","date_updated":"2023-01-25T12:09:50Z","author":[{"last_name":"Lauhof","first_name":"Marcus W.","full_name":"Lauhof, Marcus W."},{"full_name":"Benning, Stephan A.","first_name":"Stephan A.","last_name":"Benning"},{"id":"254","full_name":"Kitzerow, Heinz-Siegfried","last_name":"Kitzerow","first_name":"Heinz-Siegfried"},{"full_name":"Vill, Volkmar","first_name":"Volkmar","last_name":"Vill"},{"first_name":"Felix","last_name":"Scheliga","full_name":"Scheliga, Felix"},{"full_name":"Thorn-Csányi, Emma","first_name":"Emma","last_name":"Thorn-Csányi"}],"publication_identifier":{"issn":["0379-6779"]},"year":"2007","title":"Dichroic photo- and electroluminescence of oligo p-(phenylene vinylene) derivatives","doi":"10.1016/j.synthmet.2007.01.015","language":[{"iso":"eng"}],"publication":"Synthetic Metals","issue":"4-5","department":[{"_id":"313"},{"_id":"638"}],"type":"journal_article","keyword":["Materials Chemistry","Metals and Alloys","Mechanical Engineering","Mechanics of Materials","Condensed Matter Physics","Electronic","Optical and Magnetic Materials"],"date_created":"2023-01-25T11:57:30Z","status":"public","volume":157,"user_id":"254","_id":"39980","publisher":"Elsevier BV","page":"222-227","citation":{"short":"M.W. Lauhof, S.A. Benning, H.-S. Kitzerow, V. Vill, F. Scheliga, E. Thorn-Csányi, Synthetic Metals 157 (2007) 222–227.","chicago":"Lauhof, Marcus W., Stephan A. Benning, Heinz-Siegfried Kitzerow, Volkmar Vill, Felix Scheliga, and Emma Thorn-Csányi. “Dichroic Photo- and Electroluminescence of Oligo p-(Phenylene Vinylene) Derivatives.” <i>Synthetic Metals</i> 157, no. 4–5 (2007): 222–27. <a href=\"https://doi.org/10.1016/j.synthmet.2007.01.015\">https://doi.org/10.1016/j.synthmet.2007.01.015</a>.","ieee":"M. W. Lauhof, S. A. Benning, H.-S. Kitzerow, V. Vill, F. Scheliga, and E. Thorn-Csányi, “Dichroic photo- and electroluminescence of oligo p-(phenylene vinylene) derivatives,” <i>Synthetic Metals</i>, vol. 157, no. 4–5, pp. 222–227, 2007, doi: <a href=\"https://doi.org/10.1016/j.synthmet.2007.01.015\">10.1016/j.synthmet.2007.01.015</a>.","apa":"Lauhof, M. W., Benning, S. A., Kitzerow, H.-S., Vill, V., Scheliga, F., &#38; Thorn-Csányi, E. (2007). Dichroic photo- and electroluminescence of oligo p-(phenylene vinylene) derivatives. <i>Synthetic Metals</i>, <i>157</i>(4–5), 222–227. <a href=\"https://doi.org/10.1016/j.synthmet.2007.01.015\">https://doi.org/10.1016/j.synthmet.2007.01.015</a>","bibtex":"@article{Lauhof_Benning_Kitzerow_Vill_Scheliga_Thorn-Csányi_2007, title={Dichroic photo- and electroluminescence of oligo p-(phenylene vinylene) derivatives}, volume={157}, DOI={<a href=\"https://doi.org/10.1016/j.synthmet.2007.01.015\">10.1016/j.synthmet.2007.01.015</a>}, number={4–5}, journal={Synthetic Metals}, publisher={Elsevier BV}, author={Lauhof, Marcus W. and Benning, Stephan A. and Kitzerow, Heinz-Siegfried and Vill, Volkmar and Scheliga, Felix and Thorn-Csányi, Emma}, year={2007}, pages={222–227} }","ama":"Lauhof MW, Benning SA, Kitzerow H-S, Vill V, Scheliga F, Thorn-Csányi E. Dichroic photo- and electroluminescence of oligo p-(phenylene vinylene) derivatives. <i>Synthetic Metals</i>. 2007;157(4-5):222-227. doi:<a href=\"https://doi.org/10.1016/j.synthmet.2007.01.015\">10.1016/j.synthmet.2007.01.015</a>","mla":"Lauhof, Marcus W., et al. “Dichroic Photo- and Electroluminescence of Oligo p-(Phenylene Vinylene) Derivatives.” <i>Synthetic Metals</i>, vol. 157, no. 4–5, Elsevier BV, 2007, pp. 222–27, doi:<a href=\"https://doi.org/10.1016/j.synthmet.2007.01.015\">10.1016/j.synthmet.2007.01.015</a>."}},{"citation":{"ieee":"A. Hütten <i>et al.</i>, “Spin-electronic devices with half-metallic Heusler alloys,” <i>Journal of Alloys and Compounds</i>, vol. 423, no. 1–2, pp. 148–152, 2006, doi: <a href=\"https://doi.org/10.1016/j.jallcom.2005.12.106\">10.1016/j.jallcom.2005.12.106</a>.","apa":"Hütten, A., Schmalhorst, J., Thomas, A., Kämmerer, S., Sacher, M., Ebke, D., Liu, N.-N., Kou, X., &#38; Reiss, G. (2006). Spin-electronic devices with half-metallic Heusler alloys. <i>Journal of Alloys and Compounds</i>, <i>423</i>(1–2), 148–152. <a href=\"https://doi.org/10.1016/j.jallcom.2005.12.106\">https://doi.org/10.1016/j.jallcom.2005.12.106</a>","chicago":"Hütten, A., J. Schmalhorst, A. Thomas, S. Kämmerer, Marc Sacher, D. Ebke, N.-N. Liu, X. Kou, and G. Reiss. “Spin-Electronic Devices with Half-Metallic Heusler Alloys.” <i>Journal of Alloys and Compounds</i> 423, no. 1–2 (2006): 148–52. <a href=\"https://doi.org/10.1016/j.jallcom.2005.12.106\">https://doi.org/10.1016/j.jallcom.2005.12.106</a>.","short":"A. Hütten, J. Schmalhorst, A. Thomas, S. Kämmerer, M. Sacher, D. Ebke, N.-N. Liu, X. Kou, G. Reiss, Journal of Alloys and Compounds 423 (2006) 148–152.","mla":"Hütten, A., et al. “Spin-Electronic Devices with Half-Metallic Heusler Alloys.” <i>Journal of Alloys and Compounds</i>, vol. 423, no. 1–2, Elsevier BV, 2006, pp. 148–52, doi:<a href=\"https://doi.org/10.1016/j.jallcom.2005.12.106\">10.1016/j.jallcom.2005.12.106</a>.","bibtex":"@article{Hütten_Schmalhorst_Thomas_Kämmerer_Sacher_Ebke_Liu_Kou_Reiss_2006, title={Spin-electronic devices with half-metallic Heusler alloys}, volume={423}, DOI={<a href=\"https://doi.org/10.1016/j.jallcom.2005.12.106\">10.1016/j.jallcom.2005.12.106</a>}, number={1–2}, journal={Journal of Alloys and Compounds}, publisher={Elsevier BV}, author={Hütten, A. and Schmalhorst, J. and Thomas, A. and Kämmerer, S. and Sacher, Marc and Ebke, D. and Liu, N.-N. and Kou, X. and Reiss, G.}, year={2006}, pages={148–152} }","ama":"Hütten A, Schmalhorst J, Thomas A, et al. Spin-electronic devices with half-metallic Heusler alloys. <i>Journal of Alloys and Compounds</i>. 2006;423(1-2):148-152. doi:<a href=\"https://doi.org/10.1016/j.jallcom.2005.12.106\">10.1016/j.jallcom.2005.12.106</a>"},"status":"public","page":"148-152","_id":"29682","publisher":"Elsevier BV","user_id":"26883","volume":423,"publication":"Journal of Alloys and Compounds","issue":"1-2","extern":"1","date_created":"2022-01-31T10:15:23Z","keyword":["Materials Chemistry","Metals and Alloys","Mechanical Engineering","Mechanics of Materials"],"type":"journal_article","department":[{"_id":"15"}],"year":"2006","title":"Spin-electronic devices with half-metallic Heusler alloys","publication_identifier":{"issn":["0925-8388"]},"author":[{"full_name":"Hütten, A.","last_name":"Hütten","first_name":"A."},{"full_name":"Schmalhorst, J.","first_name":"J.","last_name":"Schmalhorst"},{"first_name":"A.","last_name":"Thomas","full_name":"Thomas, A."},{"last_name":"Kämmerer","first_name":"S.","full_name":"Kämmerer, S."},{"id":"26883","full_name":"Sacher, Marc","last_name":"Sacher","first_name":"Marc","orcid":"0000-0001-6217-336X"},{"full_name":"Ebke, D.","first_name":"D.","last_name":"Ebke"},{"first_name":"N.-N.","last_name":"Liu","full_name":"Liu, N.-N."},{"last_name":"Kou","first_name":"X.","full_name":"Kou, X."},{"last_name":"Reiss","first_name":"G.","full_name":"Reiss, G."}],"publication_status":"published","date_updated":"2024-04-23T12:18:38Z","intvolume":"       423","language":[{"iso":"eng"}],"doi":"10.1016/j.jallcom.2005.12.106"},{"publication":"Journal of Materials Research","issue":"7","abstract":[{"lang":"eng","text":"<jats:p>This article reports degradation experiments on organic thin film transistors using the small organic molecule pentacene as the semiconducting material. Starting with degradation inert <jats:italic>p</jats:italic>-type silicon wafers as the substrate and SiO<jats:sub>2</jats:sub> as the gate dielectric, we show the influence of temperature and exposure to ambient air on the charge carrier field-effect mobility, on-off-ratio, and threshold-voltage. The devices were found to have unambiguously degraded over 3 orders of magnitude in maximum on-current and charge carrier field-effect mobility, but they still operated after a period of 9 months in ambient air conditions. A thermal treatment was carried out in vacuum conditions and revealed a degradation of the charge carrier field-effect mobility, maximum on-current, and threshold voltage.</jats:p>"}],"date_created":"2023-01-25T08:37:47Z","type":"journal_article","keyword":["Mechanical Engineering","Mechanics of Materials","Condensed Matter Physics","General Materials Science"],"department":[{"_id":"59"}],"title":"Degradation of organic field-effect transistors made of pentacene","year":"2005","publication_identifier":{"issn":["0884-2914","2044-5326"]},"author":[{"first_name":"Ch.","last_name":"Pannemann","full_name":"Pannemann, Ch."},{"last_name":"Diekmann","first_name":"T.","full_name":"Diekmann, T."},{"id":"20179","last_name":"Hilleringmann","first_name":"Ulrich","full_name":"Hilleringmann, Ulrich"}],"publication_status":"published","date_updated":"2023-03-21T10:06:18Z","intvolume":"        19","language":[{"iso":"eng"}],"doi":"10.1557/jmr.2004.0267","citation":{"ama":"Pannemann Ch, Diekmann T, Hilleringmann U. Degradation of organic field-effect transistors made of pentacene. <i>Journal of Materials Research</i>. 2005;19(7):1999-2002. doi:<a href=\"https://doi.org/10.1557/jmr.2004.0267\">10.1557/jmr.2004.0267</a>","bibtex":"@article{Pannemann_Diekmann_Hilleringmann_2005, title={Degradation of organic field-effect transistors made of pentacene}, volume={19}, DOI={<a href=\"https://doi.org/10.1557/jmr.2004.0267\">10.1557/jmr.2004.0267</a>}, number={7}, journal={Journal of Materials Research}, publisher={Springer Science and Business Media LLC}, author={Pannemann, Ch. and Diekmann, T. and Hilleringmann, Ulrich}, year={2005}, pages={1999–2002} }","mla":"Pannemann, Ch., et al. “Degradation of Organic Field-Effect Transistors Made of Pentacene.” <i>Journal of Materials Research</i>, vol. 19, no. 7, Springer Science and Business Media LLC, 2005, pp. 1999–2002, doi:<a href=\"https://doi.org/10.1557/jmr.2004.0267\">10.1557/jmr.2004.0267</a>.","short":"Ch. Pannemann, T. Diekmann, U. Hilleringmann, Journal of Materials Research 19 (2005) 1999–2002.","chicago":"Pannemann, Ch., T. Diekmann, and Ulrich Hilleringmann. “Degradation of Organic Field-Effect Transistors Made of Pentacene.” <i>Journal of Materials Research</i> 19, no. 7 (2005): 1999–2002. <a href=\"https://doi.org/10.1557/jmr.2004.0267\">https://doi.org/10.1557/jmr.2004.0267</a>.","apa":"Pannemann, Ch., Diekmann, T., &#38; Hilleringmann, U. (2005). Degradation of organic field-effect transistors made of pentacene. <i>Journal of Materials Research</i>, <i>19</i>(7), 1999–2002. <a href=\"https://doi.org/10.1557/jmr.2004.0267\">https://doi.org/10.1557/jmr.2004.0267</a>","ieee":"Ch. Pannemann, T. Diekmann, and U. Hilleringmann, “Degradation of organic field-effect transistors made of pentacene,” <i>Journal of Materials Research</i>, vol. 19, no. 7, pp. 1999–2002, 2005, doi: <a href=\"https://doi.org/10.1557/jmr.2004.0267\">10.1557/jmr.2004.0267</a>."},"status":"public","page":"1999-2002","_id":"39846","publisher":"Springer Science and Business Media LLC","user_id":"20179","volume":19},{"status":"public","volume":19,"user_id":"20179","_id":"39349","publisher":"Springer Science and Business Media LLC","page":"1999-2002","citation":{"ieee":"Ch. Pannemann, T. Diekmann, and U. Hilleringmann, “Degradation of organic field-effect transistors made of pentacene,” <i>Journal of Materials Research</i>, vol. 19, no. 7, pp. 1999–2002, 2005, doi: <a href=\"https://doi.org/10.1557/jmr.2004.0267\">10.1557/jmr.2004.0267</a>.","apa":"Pannemann, Ch., Diekmann, T., &#38; Hilleringmann, U. (2005). Degradation of organic field-effect transistors made of pentacene. <i>Journal of Materials Research</i>, <i>19</i>(7), 1999–2002. <a href=\"https://doi.org/10.1557/jmr.2004.0267\">https://doi.org/10.1557/jmr.2004.0267</a>","chicago":"Pannemann, Ch., T. Diekmann, and Ulrich Hilleringmann. “Degradation of Organic Field-Effect Transistors Made of Pentacene.” <i>Journal of Materials Research</i> 19, no. 7 (2005): 1999–2002. <a href=\"https://doi.org/10.1557/jmr.2004.0267\">https://doi.org/10.1557/jmr.2004.0267</a>.","short":"Ch. Pannemann, T. Diekmann, U. Hilleringmann, Journal of Materials Research 19 (2005) 1999–2002.","mla":"Pannemann, Ch., et al. “Degradation of Organic Field-Effect Transistors Made of Pentacene.” <i>Journal of Materials Research</i>, vol. 19, no. 7, Springer Science and Business Media LLC, 2005, pp. 1999–2002, doi:<a href=\"https://doi.org/10.1557/jmr.2004.0267\">10.1557/jmr.2004.0267</a>.","bibtex":"@article{Pannemann_Diekmann_Hilleringmann_2005, title={Degradation of organic field-effect transistors made of pentacene}, volume={19}, DOI={<a href=\"https://doi.org/10.1557/jmr.2004.0267\">10.1557/jmr.2004.0267</a>}, number={7}, journal={Journal of Materials Research}, publisher={Springer Science and Business Media LLC}, author={Pannemann, Ch. and Diekmann, T. and Hilleringmann, Ulrich}, year={2005}, pages={1999–2002} }","ama":"Pannemann Ch, Diekmann T, Hilleringmann U. Degradation of organic field-effect transistors made of pentacene. <i>Journal of Materials Research</i>. 2005;19(7):1999-2002. doi:<a href=\"https://doi.org/10.1557/jmr.2004.0267\">10.1557/jmr.2004.0267</a>"},"intvolume":"        19","date_updated":"2023-03-22T10:38:56Z","publication_status":"published","publication_identifier":{"issn":["0884-2914","2044-5326"]},"author":[{"first_name":"Ch.","last_name":"Pannemann","full_name":"Pannemann, Ch."},{"last_name":"Diekmann","first_name":"T.","full_name":"Diekmann, T."},{"first_name":"Ulrich","last_name":"Hilleringmann","full_name":"Hilleringmann, Ulrich","id":"20179"}],"title":"Degradation of organic field-effect transistors made of pentacene","year":"2005","doi":"10.1557/jmr.2004.0267","language":[{"iso":"eng"}],"abstract":[{"lang":"eng","text":"<jats:p>This article reports degradation experiments on organic thin film transistors using the small organic molecule pentacene as the semiconducting material. Starting with degradation inert <jats:italic>p</jats:italic>-type silicon wafers as the substrate and SiO<jats:sub>2</jats:sub> as the gate dielectric, we show the influence of temperature and exposure to ambient air on the charge carrier field-effect mobility, on-off-ratio, and threshold-voltage. The devices were found to have unambiguously degraded over 3 orders of magnitude in maximum on-current and charge carrier field-effect mobility, but they still operated after a period of 9 months in ambient air conditions. A thermal treatment was carried out in vacuum conditions and revealed a degradation of the charge carrier field-effect mobility, maximum on-current, and threshold voltage.</jats:p>"}],"publication":"Journal of Materials Research","issue":"7","department":[{"_id":"59"}],"type":"journal_article","keyword":["Mechanical Engineering","Mechanics of Materials","Condensed Matter Physics","General Materials Science"],"date_created":"2023-01-24T09:24:41Z"},{"status":"public","user_id":"466","volume":48,"page":"881-894","publisher":"Society of Rheology","_id":"35359","quality_controlled":"1","citation":{"mla":"Cormier, Ryan J., et al. “Director Reorientation of a Side-Chain Liquid Crystalline Polymer under Extensional Flow.” <i>Journal of Rheology</i>, vol. 48, no. 4, Society of Rheology, 2004, pp. 881–94, doi:<a href=\"https://doi.org/10.1122/1.1753278\">10.1122/1.1753278</a>.","bibtex":"@article{Cormier_Schmidt_Callaghan_2004, title={Director reorientation of a side-chain liquid crystalline polymer under extensional flow}, volume={48}, DOI={<a href=\"https://doi.org/10.1122/1.1753278\">10.1122/1.1753278</a>}, number={4}, journal={Journal of Rheology}, publisher={Society of Rheology}, author={Cormier, Ryan J. and Schmidt, Claudia and Callaghan, Paul T.}, year={2004}, pages={881–894} }","ama":"Cormier RJ, Schmidt C, Callaghan PT. Director reorientation of a side-chain liquid crystalline polymer under extensional flow. <i>Journal of Rheology</i>. 2004;48(4):881-894. doi:<a href=\"https://doi.org/10.1122/1.1753278\">10.1122/1.1753278</a>","ieee":"R. J. Cormier, C. Schmidt, and P. T. Callaghan, “Director reorientation of a side-chain liquid crystalline polymer under extensional flow,” <i>Journal of Rheology</i>, vol. 48, no. 4, pp. 881–894, 2004, doi: <a href=\"https://doi.org/10.1122/1.1753278\">10.1122/1.1753278</a>.","apa":"Cormier, R. J., Schmidt, C., &#38; Callaghan, P. T. (2004). Director reorientation of a side-chain liquid crystalline polymer under extensional flow. <i>Journal of Rheology</i>, <i>48</i>(4), 881–894. <a href=\"https://doi.org/10.1122/1.1753278\">https://doi.org/10.1122/1.1753278</a>","chicago":"Cormier, Ryan J., Claudia Schmidt, and Paul T. Callaghan. “Director Reorientation of a Side-Chain Liquid Crystalline Polymer under Extensional Flow.” <i>Journal of Rheology</i> 48, no. 4 (2004): 881–94. <a href=\"https://doi.org/10.1122/1.1753278\">https://doi.org/10.1122/1.1753278</a>.","short":"R.J. Cormier, C. Schmidt, P.T. Callaghan, Journal of Rheology 48 (2004) 881–894."},"date_updated":"2023-01-07T11:23:31Z","publication_status":"published","intvolume":"        48","article_type":"original","title":"Director reorientation of a side-chain liquid crystalline polymer under extensional flow","year":"2004","publication_identifier":{"issn":["0148-6055","1520-8516"]},"author":[{"full_name":"Cormier, Ryan J.","last_name":"Cormier","first_name":"Ryan J."},{"id":"466","orcid":"0000-0003-3179-9997","first_name":"Claudia","last_name":"Schmidt","full_name":"Schmidt, Claudia"},{"full_name":"Callaghan, Paul T.","last_name":"Callaghan","first_name":"Paul T."}],"doi":"10.1122/1.1753278","language":[{"iso":"eng"}],"publication":"Journal of Rheology","issue":"4","keyword":["Mechanical Engineering","Mechanics of Materials","Condensed Matter Physics","General Materials Science"],"type":"journal_article","department":[{"_id":"2"},{"_id":"315"}],"date_created":"2023-01-06T13:15:08Z"},{"publication":"Synthetic Metals","issue":"3","date_created":"2023-01-25T12:06:23Z","department":[{"_id":"313"},{"_id":"638"}],"type":"journal_article","keyword":["Materials Chemistry","Metals and Alloys","Mechanical Engineering","Mechanics of Materials","Condensed Matter Physics","Electronic","Optical and Magnetic Materials"],"author":[{"first_name":"T","last_name":"Röder","full_name":"Röder, T"},{"id":"254","full_name":"Kitzerow, Heinz-Siegfried","first_name":"Heinz-Siegfried","last_name":"Kitzerow"},{"last_name":"Hummelen","first_name":"J.C","full_name":"Hummelen, J.C"}],"publication_identifier":{"issn":["0379-6779"]},"year":"2003","title":"Morphology and fluorescence quenching in photovoltaic samples containing fullerene and poly(p-phenylene-vinylene) derivatives","intvolume":"       141","publication_status":"published","date_updated":"2023-01-25T12:09:38Z","language":[{"iso":"eng"}],"doi":"10.1016/s0379-6779(03)00412-0","citation":{"mla":"Röder, T., et al. “Morphology and Fluorescence Quenching in Photovoltaic Samples Containing Fullerene and Poly(p-Phenylene-Vinylene) Derivatives.” <i>Synthetic Metals</i>, vol. 141, no. 3, Elsevier BV, 2003, pp. 271–75, doi:<a href=\"https://doi.org/10.1016/s0379-6779(03)00412-0\">10.1016/s0379-6779(03)00412-0</a>.","ama":"Röder T, Kitzerow H-S, Hummelen JC. Morphology and fluorescence quenching in photovoltaic samples containing fullerene and poly(p-phenylene-vinylene) derivatives. <i>Synthetic Metals</i>. 2003;141(3):271-275. doi:<a href=\"https://doi.org/10.1016/s0379-6779(03)00412-0\">10.1016/s0379-6779(03)00412-0</a>","bibtex":"@article{Röder_Kitzerow_Hummelen_2003, title={Morphology and fluorescence quenching in photovoltaic samples containing fullerene and poly(p-phenylene-vinylene) derivatives}, volume={141}, DOI={<a href=\"https://doi.org/10.1016/s0379-6779(03)00412-0\">10.1016/s0379-6779(03)00412-0</a>}, number={3}, journal={Synthetic Metals}, publisher={Elsevier BV}, author={Röder, T and Kitzerow, Heinz-Siegfried and Hummelen, J.C}, year={2003}, pages={271–275} }","apa":"Röder, T., Kitzerow, H.-S., &#38; Hummelen, J. C. (2003). Morphology and fluorescence quenching in photovoltaic samples containing fullerene and poly(p-phenylene-vinylene) derivatives. <i>Synthetic Metals</i>, <i>141</i>(3), 271–275. <a href=\"https://doi.org/10.1016/s0379-6779(03)00412-0\">https://doi.org/10.1016/s0379-6779(03)00412-0</a>","ieee":"T. Röder, H.-S. Kitzerow, and J. C. Hummelen, “Morphology and fluorescence quenching in photovoltaic samples containing fullerene and poly(p-phenylene-vinylene) derivatives,” <i>Synthetic Metals</i>, vol. 141, no. 3, pp. 271–275, 2003, doi: <a href=\"https://doi.org/10.1016/s0379-6779(03)00412-0\">10.1016/s0379-6779(03)00412-0</a>.","chicago":"Röder, T, Heinz-Siegfried Kitzerow, and J.C Hummelen. “Morphology and Fluorescence Quenching in Photovoltaic Samples Containing Fullerene and Poly(p-Phenylene-Vinylene) Derivatives.” <i>Synthetic Metals</i> 141, no. 3 (2003): 271–75. <a href=\"https://doi.org/10.1016/s0379-6779(03)00412-0\">https://doi.org/10.1016/s0379-6779(03)00412-0</a>.","short":"T. Röder, H.-S. Kitzerow, J.C. Hummelen, Synthetic Metals 141 (2003) 271–275."},"status":"public","publisher":"Elsevier BV","_id":"39985","page":"271-275","volume":141,"user_id":"254"},{"status":"public","page":"5057-5080","_id":"45307","publisher":"Elsevier BV","user_id":"335","volume":190,"citation":{"chicago":"Mahnken, Rolf. “Strength Difference in Compression and Tension and Pressure Dependence of Yielding in Elasto-Plasticity.” <i>Computer Methods in Applied Mechanics and Engineering</i> 190, no. 39 (2002): 5057–80. <a href=\"https://doi.org/10.1016/s0045-7825(00)00364-9\">https://doi.org/10.1016/s0045-7825(00)00364-9</a>.","short":"R. Mahnken, Computer Methods in Applied Mechanics and Engineering 190 (2002) 5057–5080.","apa":"Mahnken, R. (2002). Strength difference in compression and tension and pressure dependence of yielding in elasto-plasticity. <i>Computer Methods in Applied Mechanics and Engineering</i>, <i>190</i>(39), 5057–5080. <a href=\"https://doi.org/10.1016/s0045-7825(00)00364-9\">https://doi.org/10.1016/s0045-7825(00)00364-9</a>","ieee":"R. Mahnken, “Strength difference in compression and tension and pressure dependence of yielding in elasto-plasticity,” <i>Computer Methods in Applied Mechanics and Engineering</i>, vol. 190, no. 39, pp. 5057–5080, 2002, doi: <a href=\"https://doi.org/10.1016/s0045-7825(00)00364-9\">10.1016/s0045-7825(00)00364-9</a>.","ama":"Mahnken R. Strength difference in compression and tension and pressure dependence of yielding in elasto-plasticity. <i>Computer Methods in Applied Mechanics and Engineering</i>. 2002;190(39):5057-5080. doi:<a href=\"https://doi.org/10.1016/s0045-7825(00)00364-9\">10.1016/s0045-7825(00)00364-9</a>","bibtex":"@article{Mahnken_2002, title={Strength difference in compression and tension and pressure dependence of yielding in elasto-plasticity}, volume={190}, DOI={<a href=\"https://doi.org/10.1016/s0045-7825(00)00364-9\">10.1016/s0045-7825(00)00364-9</a>}, number={39}, journal={Computer Methods in Applied Mechanics and Engineering}, publisher={Elsevier BV}, author={Mahnken, Rolf}, year={2002}, pages={5057–5080} }","mla":"Mahnken, Rolf. “Strength Difference in Compression and Tension and Pressure Dependence of Yielding in Elasto-Plasticity.” <i>Computer Methods in Applied Mechanics and Engineering</i>, vol. 190, no. 39, Elsevier BV, 2002, pp. 5057–80, doi:<a href=\"https://doi.org/10.1016/s0045-7825(00)00364-9\">10.1016/s0045-7825(00)00364-9</a>."},"quality_controlled":"1","title":"Strength difference in compression and tension and pressure dependence of yielding in elasto-plasticity","year":"2002","author":[{"id":"335","full_name":"Mahnken, Rolf","first_name":"Rolf","last_name":"Mahnken"}],"publication_identifier":{"issn":["0045-7825"]},"publication_status":"published","date_updated":"2023-05-26T12:22:12Z","intvolume":"       190","language":[{"iso":"eng"}],"doi":"10.1016/s0045-7825(00)00364-9","issue":"39","publication":"Computer Methods in Applied Mechanics and Engineering","date_created":"2023-05-26T12:21:04Z","type":"journal_article","keyword":["Computer Science Applications","General Physics and Astronomy","Mechanical Engineering","Mechanics of Materials","Computational Mechanics"],"department":[{"_id":"9"},{"_id":"154"}]},{"publication":"International Journal for Numerical and Analytical Methods in Geomechanics","issue":"5","department":[{"_id":"9"},{"_id":"154"}],"type":"journal_article","keyword":["Mechanics of Materials","Geotechnical Engineering and Engineering Geology","General Materials Science","Computational Mechanics"],"date_created":"2023-05-31T11:55:35Z","intvolume":"        25","date_updated":"2023-05-31T11:55:54Z","publication_status":"published","author":[{"id":"335","full_name":"Mahnken, Rolf","last_name":"Mahnken","first_name":"Rolf"},{"last_name":"Steinmann","first_name":"P.","full_name":"Steinmann, P."}],"publication_identifier":{"issn":["0363-9061","1096-9853"]},"year":"2002","title":"A finite element algorithm for parameter identification of material models for fluid saturated porous media","doi":"10.1002/nag.136","language":[{"iso":"eng"}],"quality_controlled":"1","citation":{"bibtex":"@article{Mahnken_Steinmann_2002, title={A finite element algorithm for parameter identification of material models for fluid saturated porous media}, volume={25}, DOI={<a href=\"https://doi.org/10.1002/nag.136\">10.1002/nag.136</a>}, number={5}, journal={International Journal for Numerical and Analytical Methods in Geomechanics}, publisher={Wiley}, author={Mahnken, Rolf and Steinmann, P.}, year={2002}, pages={415–434} }","ama":"Mahnken R, Steinmann P. A finite element algorithm for parameter identification of material models for fluid saturated porous media. <i>International Journal for Numerical and Analytical Methods in Geomechanics</i>. 2002;25(5):415-434. doi:<a href=\"https://doi.org/10.1002/nag.136\">10.1002/nag.136</a>","mla":"Mahnken, Rolf, and P. Steinmann. “A Finite Element Algorithm for Parameter Identification of Material Models for Fluid Saturated Porous Media.” <i>International Journal for Numerical and Analytical Methods in Geomechanics</i>, vol. 25, no. 5, Wiley, 2002, pp. 415–34, doi:<a href=\"https://doi.org/10.1002/nag.136\">10.1002/nag.136</a>.","chicago":"Mahnken, Rolf, and P. Steinmann. “A Finite Element Algorithm for Parameter Identification of Material Models for Fluid Saturated Porous Media.” <i>International Journal for Numerical and Analytical Methods in Geomechanics</i> 25, no. 5 (2002): 415–34. <a href=\"https://doi.org/10.1002/nag.136\">https://doi.org/10.1002/nag.136</a>.","short":"R. Mahnken, P. Steinmann, International Journal for Numerical and Analytical Methods in Geomechanics 25 (2002) 415–434.","ieee":"R. Mahnken and P. Steinmann, “A finite element algorithm for parameter identification of material models for fluid saturated porous media,” <i>International Journal for Numerical and Analytical Methods in Geomechanics</i>, vol. 25, no. 5, pp. 415–434, 2002, doi: <a href=\"https://doi.org/10.1002/nag.136\">10.1002/nag.136</a>.","apa":"Mahnken, R., &#38; Steinmann, P. (2002). A finite element algorithm for parameter identification of material models for fluid saturated porous media. <i>International Journal for Numerical and Analytical Methods in Geomechanics</i>, <i>25</i>(5), 415–434. <a href=\"https://doi.org/10.1002/nag.136\">https://doi.org/10.1002/nag.136</a>"},"status":"public","volume":25,"user_id":"335","publisher":"Wiley","_id":"45413","page":"415-434"},{"department":[{"_id":"9"},{"_id":"154"}],"type":"journal_article","keyword":["Computer Science Applications","General Physics and Astronomy","Mechanical Engineering","Mechanics of Materials","Computational Mechanics"],"date_created":"2023-05-31T11:52:51Z","publication":"Computer Methods in Applied Mechanics and Engineering","issue":"32-33","doi":"10.1016/s0045-7825(00)00317-0","language":[{"iso":"eng"}],"intvolume":"       190","publication_status":"published","date_updated":"2023-05-31T11:53:38Z","author":[{"last_name":"Mahnken","first_name":"Rolf","full_name":"Mahnken, Rolf","id":"335"},{"last_name":"Kohlmeier","first_name":"M.","full_name":"Kohlmeier, M."}],"publication_identifier":{"issn":["0045-7825"]},"year":"2002","title":"Finite element simulation for rock salt with dilatancy boundary coupled to fluid permeation","quality_controlled":"1","citation":{"mla":"Mahnken, Rolf, and M. Kohlmeier. “Finite Element Simulation for Rock Salt with Dilatancy Boundary Coupled to Fluid Permeation.” <i>Computer Methods in Applied Mechanics and Engineering</i>, vol. 190, no. 32–33, Elsevier BV, 2002, pp. 4259–78, doi:<a href=\"https://doi.org/10.1016/s0045-7825(00)00317-0\">10.1016/s0045-7825(00)00317-0</a>.","bibtex":"@article{Mahnken_Kohlmeier_2002, title={Finite element simulation for rock salt with dilatancy boundary coupled to fluid permeation}, volume={190}, DOI={<a href=\"https://doi.org/10.1016/s0045-7825(00)00317-0\">10.1016/s0045-7825(00)00317-0</a>}, number={32–33}, journal={Computer Methods in Applied Mechanics and Engineering}, publisher={Elsevier BV}, author={Mahnken, Rolf and Kohlmeier, M.}, year={2002}, pages={4259–4278} }","ama":"Mahnken R, Kohlmeier M. Finite element simulation for rock salt with dilatancy boundary coupled to fluid permeation. <i>Computer Methods in Applied Mechanics and Engineering</i>. 2002;190(32-33):4259-4278. doi:<a href=\"https://doi.org/10.1016/s0045-7825(00)00317-0\">10.1016/s0045-7825(00)00317-0</a>","ieee":"R. Mahnken and M. Kohlmeier, “Finite element simulation for rock salt with dilatancy boundary coupled to fluid permeation,” <i>Computer Methods in Applied Mechanics and Engineering</i>, vol. 190, no. 32–33, pp. 4259–4278, 2002, doi: <a href=\"https://doi.org/10.1016/s0045-7825(00)00317-0\">10.1016/s0045-7825(00)00317-0</a>.","apa":"Mahnken, R., &#38; Kohlmeier, M. (2002). Finite element simulation for rock salt with dilatancy boundary coupled to fluid permeation. <i>Computer Methods in Applied Mechanics and Engineering</i>, <i>190</i>(32–33), 4259–4278. <a href=\"https://doi.org/10.1016/s0045-7825(00)00317-0\">https://doi.org/10.1016/s0045-7825(00)00317-0</a>","chicago":"Mahnken, Rolf, and M. Kohlmeier. “Finite Element Simulation for Rock Salt with Dilatancy Boundary Coupled to Fluid Permeation.” <i>Computer Methods in Applied Mechanics and Engineering</i> 190, no. 32–33 (2002): 4259–78. <a href=\"https://doi.org/10.1016/s0045-7825(00)00317-0\">https://doi.org/10.1016/s0045-7825(00)00317-0</a>.","short":"R. Mahnken, M. Kohlmeier, Computer Methods in Applied Mechanics and Engineering 190 (2002) 4259–4278."},"volume":190,"user_id":"335","publisher":"Elsevier BV","_id":"45412","page":"4259-4278","status":"public"},{"user_id":"335","volume":18,"page":"819-835","_id":"45424","publisher":"Elsevier BV","status":"public","quality_controlled":"1","citation":{"bibtex":"@article{Mahnken_Kuhl_2002, title={Parameter identification of gradient enhanced damage models with the finite element method}, volume={18}, DOI={<a href=\"https://doi.org/10.1016/s0997-7538(99)00127-8\">10.1016/s0997-7538(99)00127-8</a>}, number={5}, journal={European Journal of Mechanics - A/Solids}, publisher={Elsevier BV}, author={Mahnken, Rolf and Kuhl, Ellen}, year={2002}, pages={819–835} }","ama":"Mahnken R, Kuhl E. Parameter identification of gradient enhanced damage models with the finite element method. <i>European Journal of Mechanics - A/Solids</i>. 2002;18(5):819-835. doi:<a href=\"https://doi.org/10.1016/s0997-7538(99)00127-8\">10.1016/s0997-7538(99)00127-8</a>","mla":"Mahnken, Rolf, and Ellen Kuhl. “Parameter Identification of Gradient Enhanced Damage Models with the Finite Element Method.” <i>European Journal of Mechanics - A/Solids</i>, vol. 18, no. 5, Elsevier BV, 2002, pp. 819–35, doi:<a href=\"https://doi.org/10.1016/s0997-7538(99)00127-8\">10.1016/s0997-7538(99)00127-8</a>.","short":"R. Mahnken, E. Kuhl, European Journal of Mechanics - A/Solids 18 (2002) 819–835.","chicago":"Mahnken, Rolf, and Ellen Kuhl. “Parameter Identification of Gradient Enhanced Damage Models with the Finite Element Method.” <i>European Journal of Mechanics - A/Solids</i> 18, no. 5 (2002): 819–35. <a href=\"https://doi.org/10.1016/s0997-7538(99)00127-8\">https://doi.org/10.1016/s0997-7538(99)00127-8</a>.","ieee":"R. Mahnken and E. Kuhl, “Parameter identification of gradient enhanced damage models with the finite element method,” <i>European Journal of Mechanics - A/Solids</i>, vol. 18, no. 5, pp. 819–835, 2002, doi: <a href=\"https://doi.org/10.1016/s0997-7538(99)00127-8\">10.1016/s0997-7538(99)00127-8</a>.","apa":"Mahnken, R., &#38; Kuhl, E. (2002). Parameter identification of gradient enhanced damage models with the finite element method. <i>European Journal of Mechanics - A/Solids</i>, <i>18</i>(5), 819–835. <a href=\"https://doi.org/10.1016/s0997-7538(99)00127-8\">https://doi.org/10.1016/s0997-7538(99)00127-8</a>"},"doi":"10.1016/s0997-7538(99)00127-8","language":[{"iso":"eng"}],"date_updated":"2023-05-31T12:17:11Z","publication_status":"published","intvolume":"        18","year":"2002","title":"Parameter identification of gradient enhanced damage models with the finite element method","author":[{"full_name":"Mahnken, Rolf","first_name":"Rolf","last_name":"Mahnken","id":"335"},{"full_name":"Kuhl, Ellen","last_name":"Kuhl","first_name":"Ellen"}],"publication_identifier":{"issn":["0997-7538"]},"keyword":["General Physics and Astronomy","Mechanical Engineering","Mechanics of Materials","General Materials Science"],"type":"journal_article","department":[{"_id":"9"},{"_id":"154"}],"date_created":"2023-05-31T12:15:51Z","publication":"European Journal of Mechanics - A/Solids","issue":"5"},{"intvolume":"       136","publication_status":"published","date_updated":"2023-05-31T12:23:36Z","publication_identifier":{"issn":["0045-7825"]},"author":[{"id":"335","last_name":"Mahnken","first_name":"Rolf","full_name":"Mahnken, Rolf"},{"full_name":"Stein, Erwin","last_name":"Stein","first_name":"Erwin"}],"title":"A unified approach for parameter identification of inelastic material models in the frame of the finite element method","year":"2002","doi":"10.1016/0045-7825(96)00991-7","language":[{"iso":"eng"}],"publication":"Computer Methods in Applied Mechanics and Engineering","issue":"3-4","department":[{"_id":"9"},{"_id":"154"}],"type":"journal_article","keyword":["Computer Science Applications","General Physics and Astronomy","Mechanical Engineering","Mechanics of Materials","Computational Mechanics"],"date_created":"2023-05-31T12:22:58Z","status":"public","volume":136,"user_id":"335","_id":"45429","publisher":"Elsevier BV","page":"225-258","quality_controlled":"1","citation":{"chicago":"Mahnken, Rolf, and Erwin Stein. “A Unified Approach for Parameter Identification of Inelastic Material Models in the Frame of the Finite Element Method.” <i>Computer Methods in Applied Mechanics and Engineering</i> 136, no. 3–4 (2002): 225–58. <a href=\"https://doi.org/10.1016/0045-7825(96)00991-7\">https://doi.org/10.1016/0045-7825(96)00991-7</a>.","short":"R. Mahnken, E. Stein, Computer Methods in Applied Mechanics and Engineering 136 (2002) 225–258.","ieee":"R. Mahnken and E. Stein, “A unified approach for parameter identification of inelastic material models in the frame of the finite element method,” <i>Computer Methods in Applied Mechanics and Engineering</i>, vol. 136, no. 3–4, pp. 225–258, 2002, doi: <a href=\"https://doi.org/10.1016/0045-7825(96)00991-7\">10.1016/0045-7825(96)00991-7</a>.","apa":"Mahnken, R., &#38; Stein, E. (2002). A unified approach for parameter identification of inelastic material models in the frame of the finite element method. <i>Computer Methods in Applied Mechanics and Engineering</i>, <i>136</i>(3–4), 225–258. <a href=\"https://doi.org/10.1016/0045-7825(96)00991-7\">https://doi.org/10.1016/0045-7825(96)00991-7</a>","bibtex":"@article{Mahnken_Stein_2002, title={A unified approach for parameter identification of inelastic material models in the frame of the finite element method}, volume={136}, DOI={<a href=\"https://doi.org/10.1016/0045-7825(96)00991-7\">10.1016/0045-7825(96)00991-7</a>}, number={3–4}, journal={Computer Methods in Applied Mechanics and Engineering}, publisher={Elsevier BV}, author={Mahnken, Rolf and Stein, Erwin}, year={2002}, pages={225–258} }","ama":"Mahnken R, Stein E. A unified approach for parameter identification of inelastic material models in the frame of the finite element method. <i>Computer Methods in Applied Mechanics and Engineering</i>. 2002;136(3-4):225-258. doi:<a href=\"https://doi.org/10.1016/0045-7825(96)00991-7\">10.1016/0045-7825(96)00991-7</a>","mla":"Mahnken, Rolf, and Erwin Stein. “A Unified Approach for Parameter Identification of Inelastic Material Models in the Frame of the Finite Element Method.” <i>Computer Methods in Applied Mechanics and Engineering</i>, vol. 136, no. 3–4, Elsevier BV, 2002, pp. 225–58, doi:<a href=\"https://doi.org/10.1016/0045-7825(96)00991-7\">10.1016/0045-7825(96)00991-7</a>."}},{"publication_identifier":{"issn":["0965-0393","1361-651X"]},"author":[{"first_name":"Rolf","last_name":"Mahnken","full_name":"Mahnken, Rolf","id":"335"},{"full_name":"Stein, E","first_name":"E","last_name":"Stein"}],"year":"2002","title":"The identification of parameters for visco-plastic models via finite-element methods and gradient methods","intvolume":"         2","date_updated":"2023-05-31T12:28:27Z","publication_status":"published","language":[{"iso":"eng"}],"doi":"10.1088/0965-0393/2/3a/013","issue":"3A","publication":"Modelling and Simulation in Materials Science and Engineering","date_created":"2023-05-31T12:28:01Z","department":[{"_id":"9"},{"_id":"154"}],"keyword":["Computer Science Applications","Mechanics of Materials","Condensed Matter Physics","General Materials Science","Modeling and Simulation"],"type":"journal_article","status":"public","_id":"45432","publisher":"IOP Publishing","page":"597-616","volume":2,"user_id":"335","citation":{"mla":"Mahnken, Rolf, and E. Stein. “The Identification of Parameters for Visco-Plastic Models via Finite-Element Methods and Gradient Methods.” <i>Modelling and Simulation in Materials Science and Engineering</i>, vol. 2, no. 3A, IOP Publishing, 2002, pp. 597–616, doi:<a href=\"https://doi.org/10.1088/0965-0393/2/3a/013\">10.1088/0965-0393/2/3a/013</a>.","bibtex":"@article{Mahnken_Stein_2002, title={The identification of parameters for visco-plastic models via finite-element methods and gradient methods}, volume={2}, DOI={<a href=\"https://doi.org/10.1088/0965-0393/2/3a/013\">10.1088/0965-0393/2/3a/013</a>}, number={3A}, journal={Modelling and Simulation in Materials Science and Engineering}, publisher={IOP Publishing}, author={Mahnken, Rolf and Stein, E}, year={2002}, pages={597–616} }","ama":"Mahnken R, Stein E. The identification of parameters for visco-plastic models via finite-element methods and gradient methods. <i>Modelling and Simulation in Materials Science and Engineering</i>. 2002;2(3A):597-616. doi:<a href=\"https://doi.org/10.1088/0965-0393/2/3a/013\">10.1088/0965-0393/2/3a/013</a>","ieee":"R. Mahnken and E. Stein, “The identification of parameters for visco-plastic models via finite-element methods and gradient methods,” <i>Modelling and Simulation in Materials Science and Engineering</i>, vol. 2, no. 3A, pp. 597–616, 2002, doi: <a href=\"https://doi.org/10.1088/0965-0393/2/3a/013\">10.1088/0965-0393/2/3a/013</a>.","apa":"Mahnken, R., &#38; Stein, E. (2002). The identification of parameters for visco-plastic models via finite-element methods and gradient methods. <i>Modelling and Simulation in Materials Science and Engineering</i>, <i>2</i>(3A), 597–616. <a href=\"https://doi.org/10.1088/0965-0393/2/3a/013\">https://doi.org/10.1088/0965-0393/2/3a/013</a>","short":"R. Mahnken, E. Stein, Modelling and Simulation in Materials Science and Engineering 2 (2002) 597–616.","chicago":"Mahnken, Rolf, and E Stein. “The Identification of Parameters for Visco-Plastic Models via Finite-Element Methods and Gradient Methods.” <i>Modelling and Simulation in Materials Science and Engineering</i> 2, no. 3A (2002): 597–616. <a href=\"https://doi.org/10.1088/0965-0393/2/3a/013\">https://doi.org/10.1088/0965-0393/2/3a/013</a>."},"quality_controlled":"1"},{"quality_controlled":"1","citation":{"ama":"Mahnken R, Stein E. Parameter identification for viscoplastic models based on analytical derivatives of a least-squares functional and stability investigations. <i>International Journal of Plasticity</i>. 2002;12(4):451-479. doi:<a href=\"https://doi.org/10.1016/s0749-6419(95)00016-x\">10.1016/s0749-6419(95)00016-x</a>","bibtex":"@article{Mahnken_Stein_2002, title={Parameter identification for viscoplastic models based on analytical derivatives of a least-squares functional and stability investigations}, volume={12}, DOI={<a href=\"https://doi.org/10.1016/s0749-6419(95)00016-x\">10.1016/s0749-6419(95)00016-x</a>}, number={4}, journal={International Journal of Plasticity}, publisher={Elsevier BV}, author={Mahnken, Rolf and Stein, Erwin}, year={2002}, pages={451–479} }","mla":"Mahnken, Rolf, and Erwin Stein. “Parameter Identification for Viscoplastic Models Based on Analytical Derivatives of a Least-Squares Functional and Stability Investigations.” <i>International Journal of Plasticity</i>, vol. 12, no. 4, Elsevier BV, 2002, pp. 451–79, doi:<a href=\"https://doi.org/10.1016/s0749-6419(95)00016-x\">10.1016/s0749-6419(95)00016-x</a>.","chicago":"Mahnken, Rolf, and Erwin Stein. “Parameter Identification for Viscoplastic Models Based on Analytical Derivatives of a Least-Squares Functional and Stability Investigations.” <i>International Journal of Plasticity</i> 12, no. 4 (2002): 451–79. <a href=\"https://doi.org/10.1016/s0749-6419(95)00016-x\">https://doi.org/10.1016/s0749-6419(95)00016-x</a>.","short":"R. Mahnken, E. Stein, International Journal of Plasticity 12 (2002) 451–479.","apa":"Mahnken, R., &#38; Stein, E. (2002). Parameter identification for viscoplastic models based on analytical derivatives of a least-squares functional and stability investigations. <i>International Journal of Plasticity</i>, <i>12</i>(4), 451–479. <a href=\"https://doi.org/10.1016/s0749-6419(95)00016-x\">https://doi.org/10.1016/s0749-6419(95)00016-x</a>","ieee":"R. Mahnken and E. Stein, “Parameter identification for viscoplastic models based on analytical derivatives of a least-squares functional and stability investigations,” <i>International Journal of Plasticity</i>, vol. 12, no. 4, pp. 451–479, 2002, doi: <a href=\"https://doi.org/10.1016/s0749-6419(95)00016-x\">10.1016/s0749-6419(95)00016-x</a>."},"status":"public","user_id":"335","volume":12,"page":"451-479","_id":"45430","publisher":"Elsevier BV","publication":"International Journal of Plasticity","issue":"4","type":"journal_article","keyword":["Mechanical Engineering","Mechanics of Materials","General Materials Science"],"department":[{"_id":"9"},{"_id":"154"}],"date_created":"2023-05-31T12:24:47Z","publication_status":"published","date_updated":"2023-05-31T12:25:19Z","intvolume":"        12","year":"2002","title":"Parameter identification for viscoplastic models based on analytical derivatives of a least-squares functional and stability investigations","publication_identifier":{"issn":["0749-6419"]},"author":[{"full_name":"Mahnken, Rolf","first_name":"Rolf","last_name":"Mahnken","id":"335"},{"full_name":"Stein, Erwin","first_name":"Erwin","last_name":"Stein"}],"doi":"10.1016/s0749-6419(95)00016-x","language":[{"iso":"eng"}]}]