[{"doi":"10.4028/p-5fxp53","language":[{"iso":"eng"}],"main_file_link":[{"url":"https://www.scientific.net/KEM.926.1457","open_access":"1"}],"intvolume":" 926","publication_status":"published","date_updated":"2022-08-17T06:02:07Z","publication_identifier":{"issn":["1662-9795"]},"author":[{"full_name":"Stallmeister, Tim","first_name":"Tim","last_name":"Stallmeister"},{"full_name":"Tröster, Thomas","first_name":"Thomas","last_name":"Tröster"}],"title":"In-Mold-Assembly of Hybrid Bending Structures by Compression Molding","year":"2022","type":"journal_article","keyword":["Mechanical Engineering","Mechanics of Materials","General Materials Science"],"date_created":"2022-08-17T05:59:05Z","abstract":[{"lang":"eng","text":"The further development of in-mold-assembly (IMA) technologies for structural hybrid components is of great importance for increasing the economic efficiency and thus the application potential. This paper presents an innovative IMA process concept for the manufacturing of bending loaded hybrid components consisting of two outer metal belts and an inner core structure made of glass mat reinforced thermoplastic (GMT). In this process, the core structure, which is provided with stiffening ribs and functional elements, is formed and joined to two metal belts in one single step. For experimental validation of the concept, the development of a prototypic molding tool and the manufacturing of hybrid beams including process parameters are described. Three-point bending tests and optical measurement technologies are used to characterize the failure behavior and mechanical properties of the produced hybrid beams. It was found that the innovative IMA process enables the manufacturing of hybrid components with high energy absorption and low weight in one step. The mass-specific energy absorption is increased by 693 % compared to pure GMT beams."}],"publication":"Key Engineering Materials","volume":926,"user_id":"45538","publisher":"Trans Tech Publications, Ltd.","_id":"32864","page":"1457-1467","status":"public","oa":"1","citation":{"chicago":"Stallmeister, Tim, and Thomas Tröster. “In-Mold-Assembly of Hybrid Bending Structures by Compression Molding.” Key Engineering Materials 926 (2022): 1457–67. https://doi.org/10.4028/p-5fxp53.","short":"T. Stallmeister, T. Tröster, Key Engineering Materials 926 (2022) 1457–1467.","ieee":"T. Stallmeister and T. Tröster, “In-Mold-Assembly of Hybrid Bending Structures by Compression Molding,” Key Engineering Materials, vol. 926, pp. 1457–1467, 2022, doi: 10.4028/p-5fxp53.","apa":"Stallmeister, T., & Tröster, T. (2022). In-Mold-Assembly of Hybrid Bending Structures by Compression Molding. Key Engineering Materials, 926, 1457–1467. https://doi.org/10.4028/p-5fxp53","bibtex":"@article{Stallmeister_Tröster_2022, title={In-Mold-Assembly of Hybrid Bending Structures by Compression Molding}, volume={926}, DOI={10.4028/p-5fxp53}, journal={Key Engineering Materials}, publisher={Trans Tech Publications, Ltd.}, author={Stallmeister, Tim and Tröster, Thomas}, year={2022}, pages={1457–1467} }","ama":"Stallmeister T, Tröster T. In-Mold-Assembly of Hybrid Bending Structures by Compression Molding. Key Engineering Materials. 2022;926:1457-1467. doi:10.4028/p-5fxp53","mla":"Stallmeister, Tim, and Thomas Tröster. “In-Mold-Assembly of Hybrid Bending Structures by Compression Molding.” Key Engineering Materials, vol. 926, Trans Tech Publications, Ltd., 2022, pp. 1457–67, doi:10.4028/p-5fxp53."}},{"type":"journal_article","keyword":["Metals and Alloys","Mechanical Engineering","Mechanics of Materials"],"date_created":"2022-08-24T12:51:07Z","abstract":[{"text":"AbstractHeated tool butt welding is a method often used for joining thermoplastics, especially when the components are made out of different materials. The quality of the connection between the components crucially depends on a suitable choice of the parameters of the welding process, such as heating time, temperature, and the precise way how the parts are then welded. Moreover, when different materials are to be joined, the parameter values need to be tailored to the specifics of the respective material. To this end, in this paper, three approaches to tailor the parameter values to optimize the quality of the connection are compared: a heuristic by Potente, statistical experimental design, and Bayesian optimization. With the suitability for practice in mind, a series of experiments are carried out with these approaches, and their capabilities of proposing well-performing parameter values are investigated. As a result, Bayesian optimization is found to yield peak performance, but the costs for optimization are substantial. In contrast, the Potente heuristic does not require any experimentation and recommends parameter values with competitive quality.","lang":"eng"}],"project":[{"_id":"1","name":"SFB 901: SFB 901"},{"name":"SFB 901 - B: SFB 901 - Project Area B","_id":"3"},{"name":"SFB 901 - B2: SFB 901 - Subproject B2","_id":"10"}],"publication":"Welding in the World","citation":{"ama":"Gevers K, Tornede A, Wever MD, Schöppner V, Hüllermeier E. A comparison of heuristic, statistical, and machine learning methods for heated tool butt welding of two different materials. Welding in the World. Published online 2022. doi:10.1007/s40194-022-01339-9","bibtex":"@article{Gevers_Tornede_Wever_Schöppner_Hüllermeier_2022, title={A comparison of heuristic, statistical, and machine learning methods for heated tool butt welding of two different materials}, DOI={10.1007/s40194-022-01339-9}, journal={Welding in the World}, publisher={Springer Science and Business Media LLC}, author={Gevers, Karina and Tornede, Alexander and Wever, Marcel Dominik and Schöppner, Volker and Hüllermeier, Eyke}, year={2022} }","mla":"Gevers, Karina, et al. “A Comparison of Heuristic, Statistical, and Machine Learning Methods for Heated Tool Butt Welding of Two Different Materials.” Welding in the World, Springer Science and Business Media LLC, 2022, doi:10.1007/s40194-022-01339-9.","chicago":"Gevers, Karina, Alexander Tornede, Marcel Dominik Wever, Volker Schöppner, and Eyke Hüllermeier. “A Comparison of Heuristic, Statistical, and Machine Learning Methods for Heated Tool Butt Welding of Two Different Materials.” Welding in the World, 2022. https://doi.org/10.1007/s40194-022-01339-9.","short":"K. Gevers, A. Tornede, M.D. Wever, V. Schöppner, E. Hüllermeier, Welding in the World (2022).","apa":"Gevers, K., Tornede, A., Wever, M. D., Schöppner, V., & Hüllermeier, E. (2022). A comparison of heuristic, statistical, and machine learning methods for heated tool butt welding of two different materials. Welding in the World. https://doi.org/10.1007/s40194-022-01339-9","ieee":"K. Gevers, A. Tornede, M. D. Wever, V. Schöppner, and E. Hüllermeier, “A comparison of heuristic, statistical, and machine learning methods for heated tool butt welding of two different materials,” Welding in the World, 2022, doi: 10.1007/s40194-022-01339-9."},"user_id":"38209","doi":"10.1007/s40194-022-01339-9","language":[{"iso":"eng"}],"_id":"33090","publisher":"Springer Science and Business Media LLC","publication_status":"published","date_updated":"2022-08-24T12:52:06Z","title":"A comparison of heuristic, statistical, and machine learning methods for heated tool butt welding of two different materials","year":"2022","status":"public","author":[{"id":"83151","first_name":"Karina","last_name":"Gevers","full_name":"Gevers, Karina"},{"full_name":"Tornede, Alexander","first_name":"Alexander","last_name":"Tornede","id":"38209"},{"last_name":"Wever","first_name":"Marcel Dominik","orcid":" https://orcid.org/0000-0001-9782-6818","full_name":"Wever, Marcel Dominik","id":"33176"},{"id":"20530","first_name":"Volker","last_name":"Schöppner","full_name":"Schöppner, Volker"},{"id":"48129","full_name":"Hüllermeier, Eyke","last_name":"Hüllermeier","first_name":"Eyke"}],"publication_identifier":{"issn":["0043-2288","1878-6669"]}},{"citation":{"ieee":"M. Raghuwanshi et al., “Fingerprints Indicating Superior Properties of Internal Interfaces in Cu(In,Ga)Se 2 Thin‐Film Solar Cells,” Advanced Materials, vol. 34, no. 37, Art. no. 2203954, 2022, doi: 10.1002/adma.202203954.","apa":"Raghuwanshi, M., Chugh, M., Sozzi, G., Kanevce, A., Kühne, T., Mirhosseini, H., Wuerz, R., & Cojocaru‐Mirédin, O. (2022). Fingerprints Indicating Superior Properties of Internal Interfaces in Cu(In,Ga)Se 2 Thin‐Film Solar Cells. Advanced Materials, 34(37), Article 2203954. https://doi.org/10.1002/adma.202203954","short":"M. Raghuwanshi, M. Chugh, G. Sozzi, A. Kanevce, T. Kühne, H. Mirhosseini, R. Wuerz, O. Cojocaru‐Mirédin, Advanced Materials 34 (2022).","chicago":"Raghuwanshi, Mohit, Manjusha Chugh, Giovanna Sozzi, Ana Kanevce, Thomas Kühne, Hossein Mirhosseini, Roland Wuerz, and Oana Cojocaru‐Mirédin. “Fingerprints Indicating Superior Properties of Internal Interfaces in Cu(In,Ga)Se 2 Thin‐Film Solar Cells.” Advanced Materials 34, no. 37 (2022). https://doi.org/10.1002/adma.202203954.","mla":"Raghuwanshi, Mohit, et al. “Fingerprints Indicating Superior Properties of Internal Interfaces in Cu(In,Ga)Se 2 Thin‐Film Solar Cells.” Advanced Materials, vol. 34, no. 37, 2203954, Wiley, 2022, doi:10.1002/adma.202203954.","bibtex":"@article{Raghuwanshi_Chugh_Sozzi_Kanevce_Kühne_Mirhosseini_Wuerz_Cojocaru‐Mirédin_2022, title={Fingerprints Indicating Superior Properties of Internal Interfaces in Cu(In,Ga)Se 2 Thin‐Film Solar Cells}, volume={34}, DOI={10.1002/adma.202203954}, number={372203954}, journal={Advanced Materials}, publisher={Wiley}, author={Raghuwanshi, Mohit and Chugh, Manjusha and Sozzi, Giovanna and Kanevce, Ana and Kühne, Thomas and Mirhosseini, Hossein and Wuerz, Roland and Cojocaru‐Mirédin, Oana}, year={2022} }","ama":"Raghuwanshi M, Chugh M, Sozzi G, et al. Fingerprints Indicating Superior Properties of Internal Interfaces in Cu(In,Ga)Se 2 Thin‐Film Solar Cells. Advanced Materials. 2022;34(37). doi:10.1002/adma.202203954"},"user_id":"71051","volume":34,"_id":"33689","publisher":"Wiley","status":"public","type":"journal_article","keyword":["Mechanical Engineering","Mechanics of Materials","General Materials Science"],"department":[{"_id":"613"}],"date_created":"2022-10-11T08:21:08Z","publication":"Advanced Materials","issue":"37","doi":"10.1002/adma.202203954","article_number":"2203954","language":[{"iso":"eng"}],"publication_status":"published","date_updated":"2022-10-11T08:21:29Z","intvolume":" 34","year":"2022","title":"Fingerprints Indicating Superior Properties of Internal Interfaces in Cu(In,Ga)Se 2 Thin‐Film Solar Cells","publication_identifier":{"issn":["0935-9648","1521-4095"]},"author":[{"full_name":"Raghuwanshi, Mohit","last_name":"Raghuwanshi","first_name":"Mohit"},{"id":"71511","full_name":"Chugh, Manjusha","last_name":"Chugh","first_name":"Manjusha"},{"last_name":"Sozzi","first_name":"Giovanna","full_name":"Sozzi, Giovanna"},{"full_name":"Kanevce, Ana","last_name":"Kanevce","first_name":"Ana"},{"full_name":"Kühne, Thomas","last_name":"Kühne","first_name":"Thomas","id":"49079"},{"id":"71051","last_name":"Mirhosseini","first_name":"Hossein","orcid":"0000-0001-6179-1545","full_name":"Mirhosseini, Hossein"},{"first_name":"Roland","last_name":"Wuerz","full_name":"Wuerz, Roland"},{"full_name":"Cojocaru‐Mirédin, Oana","first_name":"Oana","last_name":"Cojocaru‐Mirédin"}]},{"abstract":[{"text":"Lightweight construction has increasingly become the focus of scientific research in recent years, not least due to\r\nthe constantly increasing fuel price, which is a key factor in the economic viability of many companies. In this\r\nrespect, the use of hybrid structures, made of dissimilar materials offers many advantages. However, such hybrid\r\nstructures often have undesirable side effects. For example, brittle intermetallic phases are formed when\r\naluminum and steel are welded. Clinching as a mechanical joining process does not produce such intermetallic\r\nphases since the connection is realized through form and force closure. In this process, a punch passes through\r\ntwo or more sheets and forms them into a permanent joint in a die. In the present work, the corrosion phenomena\r\nof an aluminum-steel clinched joint have been investigated by both experiments and numerical simulations in\r\norder to explain the superior fatigue behavior of pre-corroded joints. Therefore, the clinched joints have been\r\ncorroded by a three-week salt-spray test. In addition, the electric potential and the von Mises stress are calculated\r\nunder the assumption of a static loading. The results of both experiments and numerical simulations can explain\r\nthe improvement in the fatigue behavior of the corroded specimens. This phenomenon can be attributed to the\r\naccumulation of corrosion products in small gaps between the joined metal sheets.","lang":"eng"}],"publication":"Journal of Advanced Joining Processes","keyword":["Mechanical Engineering","Mechanics of Materials","Engineering (miscellaneous)","Chemical Engineering (miscellaneous)"],"type":"journal_article","department":[{"_id":"630"}],"date_created":"2022-12-06T19:29:59Z","publication_status":"published","date_updated":"2023-01-02T11:04:06Z","intvolume":" 6","title":"Corrosion Phenomena and Fatigue Behavior of Clinched Joints: Numerical and Experimental Investigations","year":"2022","publication_identifier":{"issn":["2666-3309"]},"author":[{"full_name":"Harzheim, Sven","last_name":"Harzheim","first_name":"Sven"},{"last_name":"Ewenz","first_name":"Lars","full_name":"Ewenz, Lars"},{"full_name":"Zimmermann, Martina","last_name":"Zimmermann","first_name":"Martina"},{"full_name":"Wallmersperger, Thomas","last_name":"Wallmersperger","first_name":"Thomas"}],"doi":"10.1016/j.jajp.2022.100130","article_number":"100130","main_file_link":[{"url":"https://www.sciencedirect.com/science/article/pii/S2666330922000346?via%3Dihub","open_access":"1"}],"language":[{"iso":"eng"}],"project":[{"_id":"130","grant_number":"418701707","name":"TRR 285: TRR 285"},{"_id":"132","name":"TRR 285 - B: TRR 285 - Project Area B"},{"_id":"141","name":"TRR 285 – B02: TRR 285 - Subproject B02"},{"name":"TRR 285 – B03: TRR 285 - Subproject B03","_id":"142"}],"citation":{"ama":"Harzheim S, Ewenz L, Zimmermann M, Wallmersperger T. Corrosion Phenomena and Fatigue Behavior of Clinched Joints: Numerical and Experimental Investigations. Journal of Advanced Joining Processes. 2022;6. doi:10.1016/j.jajp.2022.100130","short":"S. Harzheim, L. Ewenz, M. Zimmermann, T. Wallmersperger, Journal of Advanced Joining Processes 6 (2022).","chicago":"Harzheim, Sven, Lars Ewenz, Martina Zimmermann, and Thomas Wallmersperger. “Corrosion Phenomena and Fatigue Behavior of Clinched Joints: Numerical and Experimental Investigations.” Journal of Advanced Joining Processes 6 (2022). https://doi.org/10.1016/j.jajp.2022.100130.","bibtex":"@article{Harzheim_Ewenz_Zimmermann_Wallmersperger_2022, title={Corrosion Phenomena and Fatigue Behavior of Clinched Joints: Numerical and Experimental Investigations}, volume={6}, DOI={10.1016/j.jajp.2022.100130}, number={100130}, journal={Journal of Advanced Joining Processes}, publisher={Elsevier BV}, author={Harzheim, Sven and Ewenz, Lars and Zimmermann, Martina and Wallmersperger, Thomas}, year={2022} }","apa":"Harzheim, S., Ewenz, L., Zimmermann, M., & Wallmersperger, T. (2022). Corrosion Phenomena and Fatigue Behavior of Clinched Joints: Numerical and Experimental Investigations. Journal of Advanced Joining Processes, 6, Article 100130. https://doi.org/10.1016/j.jajp.2022.100130","mla":"Harzheim, Sven, et al. “Corrosion Phenomena and Fatigue Behavior of Clinched Joints: Numerical and Experimental Investigations.” Journal of Advanced Joining Processes, vol. 6, 100130, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100130.","ieee":"S. Harzheim, L. Ewenz, M. Zimmermann, and T. Wallmersperger, “Corrosion Phenomena and Fatigue Behavior of Clinched Joints: Numerical and Experimental Investigations,” Journal of Advanced Joining Processes, vol. 6, Art. no. 100130, 2022, doi: 10.1016/j.jajp.2022.100130."},"oa":"1","status":"public","user_id":"14931","volume":6,"publisher":"Elsevier BV","_id":"34253"},{"date_created":"2022-12-06T19:03:30Z","department":[{"_id":"630"}],"keyword":["Industrial and Manufacturing Engineering","Mechanical Engineering","Mechanics of Materials"],"type":"journal_article","issue":"5","publication":"Journal of Manufacturing and Materials Processing","abstract":[{"text":"The trend towards lightweight design, driven by increasingly stringent emission targets, poses challenges to conventional joining processes due to the different mechanical properties of the joining partners used to manufacture multi-material systems. For this reason, new versatile joining processes are in demand for joining dissimilar materials. In this regard, pin joining with cold extruded pin structures is a relatively new, two-stage joining process for joining materials such as high-strength steel and aluminium as well as steel and fibre-reinforced plastic to multi-material systems, without the need for auxiliary elements. Due to the novelty of the process, there are currently only a few studies on the robustness of this joining process available. Thus, limited statements on the stability of the joining process considering uncertain process conditions, such as varying material properties or friction values, can be provided. Motivated by this, the presented work investigates the influence of different uncertain process parameters on the pin extrusion as well as on the joining process itself, carrying out a systematic robustness analysis. Therefore, the methodical approach covers the complete process chain of pin joining, including the load-bearing capacity of the joint by means of numerical simulation and data-driven methods. Thereby, a deeper understanding of the pin joining process is generated and the versatility of the novel joining process is increased. Additionally, the provision of manufacturing recommendations for the forming of pin joints leads to a significant decrease in the failure probability caused by ploughing or buckling effects.","lang":"eng"}],"language":[{"iso":"eng"}],"article_number":"122","main_file_link":[{"open_access":"1","url":"https://www.mdpi.com/2504-4494/6/5/122"}],"doi":"10.3390/jmmp6050122","publication_identifier":{"issn":["2504-4494"]},"author":[{"last_name":"Römisch","first_name":"David","full_name":"Römisch, David"},{"full_name":"Zirngibl, Christoph","last_name":"Zirngibl","first_name":"Christoph"},{"first_name":"Benjamin","last_name":"Schleich","full_name":"Schleich, Benjamin"},{"full_name":"Wartzack, Sandro","first_name":"Sandro","last_name":"Wartzack"},{"full_name":"Merklein, Marion","last_name":"Merklein","first_name":"Marion"}],"year":"2022","title":"Robustness Analysis of Pin Joining","intvolume":" 6","publication_status":"published","date_updated":"2023-01-02T11:01:05Z","oa":"1","citation":{"chicago":"Römisch, David, Christoph Zirngibl, Benjamin Schleich, Sandro Wartzack, and Marion Merklein. “Robustness Analysis of Pin Joining.” Journal of Manufacturing and Materials Processing 6, no. 5 (2022). https://doi.org/10.3390/jmmp6050122.","ama":"Römisch D, Zirngibl C, Schleich B, Wartzack S, Merklein M. Robustness Analysis of Pin Joining. Journal of Manufacturing and Materials Processing. 2022;6(5). doi:10.3390/jmmp6050122","short":"D. Römisch, C. Zirngibl, B. Schleich, S. Wartzack, M. Merklein, Journal of Manufacturing and Materials Processing 6 (2022).","bibtex":"@article{Römisch_Zirngibl_Schleich_Wartzack_Merklein_2022, title={Robustness Analysis of Pin Joining}, volume={6}, DOI={10.3390/jmmp6050122}, number={5122}, journal={Journal of Manufacturing and Materials Processing}, publisher={MDPI AG}, author={Römisch, David and Zirngibl, Christoph and Schleich, Benjamin and Wartzack, Sandro and Merklein, Marion}, year={2022} }","apa":"Römisch, D., Zirngibl, C., Schleich, B., Wartzack, S., & Merklein, M. (2022). Robustness Analysis of Pin Joining. Journal of Manufacturing and Materials Processing, 6(5), Article 122. https://doi.org/10.3390/jmmp6050122","mla":"Römisch, David, et al. “Robustness Analysis of Pin Joining.” Journal of Manufacturing and Materials Processing, vol. 6, no. 5, 122, MDPI AG, 2022, doi:10.3390/jmmp6050122.","ieee":"D. Römisch, C. Zirngibl, B. Schleich, S. Wartzack, and M. Merklein, “Robustness Analysis of Pin Joining,” Journal of Manufacturing and Materials Processing, vol. 6, no. 5, Art. no. 122, 2022, doi: 10.3390/jmmp6050122."},"project":[{"name":"TRR 285: TRR 285","grant_number":"418701707","_id":"130"},{"_id":"132","name":"TRR 285 - B: TRR 285 - Project Area B"},{"name":"TRR 285 – B05: TRR 285 - Subproject B05","_id":"144"},{"name":"TRR 285 - C: TRR 285 - Project Area C","_id":"133"},{"name":"TRR 285 – C01: TRR 285 - Subproject C01","_id":"145"}],"_id":"34249","publisher":"MDPI AG","volume":6,"user_id":"14931","status":"public"},{"oa":"1","project":[{"_id":"130","grant_number":"418701707","name":"TRR 285: TRR 285"},{"name":"TRR 285 - A: TRR 285 - Project Area A","_id":"131"},{"name":"TRR 285 – A03: TRR 285 - Subproject A03","_id":"137"}],"citation":{"chicago":"Borowski, Andreas, Benjamin Gröger, René Füßel, and Maik Gude. “Characterisation of Fibre Bundle Deformation Behaviour—Test Rig, Results and Conclusions.” Journal of Manufacturing and Materials Processing 6, no. 6 (2022). https://doi.org/10.3390/jmmp6060146.","short":"A. Borowski, B. Gröger, R. Füßel, M. Gude, Journal of Manufacturing and Materials Processing 6 (2022).","apa":"Borowski, A., Gröger, B., Füßel, R., & Gude, M. (2022). Characterisation of Fibre Bundle Deformation Behaviour—Test Rig, Results and Conclusions. Journal of Manufacturing and Materials Processing, 6(6), Article 146. https://doi.org/10.3390/jmmp6060146","ieee":"A. Borowski, B. Gröger, R. Füßel, and M. Gude, “Characterisation of Fibre Bundle Deformation Behaviour—Test Rig, Results and Conclusions,” Journal of Manufacturing and Materials Processing, vol. 6, no. 6, Art. no. 146, 2022, doi: 10.3390/jmmp6060146.","ama":"Borowski A, Gröger B, Füßel R, Gude M. Characterisation of Fibre Bundle Deformation Behaviour—Test Rig, Results and Conclusions. Journal of Manufacturing and Materials Processing. 2022;6(6). doi:10.3390/jmmp6060146","bibtex":"@article{Borowski_Gröger_Füßel_Gude_2022, title={Characterisation of Fibre Bundle Deformation Behaviour—Test Rig, Results and Conclusions}, volume={6}, DOI={10.3390/jmmp6060146}, number={6146}, journal={Journal of Manufacturing and Materials Processing}, publisher={MDPI AG}, author={Borowski, Andreas and Gröger, Benjamin and Füßel, René and Gude, Maik}, year={2022} }","mla":"Borowski, Andreas, et al. “Characterisation of Fibre Bundle Deformation Behaviour—Test Rig, Results and Conclusions.” Journal of Manufacturing and Materials Processing, vol. 6, no. 6, 146, MDPI AG, 2022, doi:10.3390/jmmp6060146."},"volume":6,"user_id":"14931","_id":"34255","publisher":"MDPI AG","status":"public","department":[{"_id":"630"}],"keyword":["Industrial and Manufacturing Engineering","Mechanical Engineering","Mechanics of Materials"],"type":"journal_article","date_created":"2022-12-06T20:38:11Z","abstract":[{"lang":"eng","text":"Deformation of continuous fibre reinforced plastics during thermally-assisted forming or joining processes leads to a change of the initial material structure. The load behaviour of composite parts strongly depends on the resultant material structure. The prediction of this material structure is a challenging task and requires a deep knowledge of the material behaviour above melting temperature and the occurring complex forming phenomena. Through this knowledge, the optimisation of manufacturing parameters for a more efficient and reproducible process can be enabled and are in the focus of many investigations. In the present paper, a simplified pultrusion test rig is developed and presented to investigate the deformation behaviour of a thermoplastic semi-finished fiber product in a forming element. Therefore, different process parameters, like forming element temperature, pulling velocity as well as the forming element geometry, are varied. The deformation behaviour in the forming zone of the thermoplastic preimpregnated continuous glass fibre-reinforced material is investigated by computed tomography and the resultant pulling forces are measured. The results clearly show the correlation between the forming element temperature and the resulting forces due to a change in the viscosity of the thermoplastic matrix and the resulting fiber matrix interaction. In addition, the evaluation of the measurement data shows which forming forces are required to change the shape of the thermoplastic unidirectional material with a rectangular cross-section to a round one."}],"issue":"6","publication":"Journal of Manufacturing and Materials Processing","doi":"10.3390/jmmp6060146","language":[{"iso":"eng"}],"article_number":"146","main_file_link":[{"url":"https://www.mdpi.com/2504-4494/6/6/146","open_access":"1"}],"intvolume":" 6","publication_status":"published","date_updated":"2023-01-02T11:05:02Z","author":[{"full_name":"Borowski, Andreas","last_name":"Borowski","first_name":"Andreas"},{"first_name":"Benjamin","last_name":"Gröger","full_name":"Gröger, Benjamin"},{"first_name":"René","last_name":"Füßel","full_name":"Füßel, René"},{"first_name":"Maik","last_name":"Gude","full_name":"Gude, Maik"}],"publication_identifier":{"issn":["2504-4494"]},"year":"2022","title":"Characterisation of Fibre Bundle Deformation Behaviour—Test Rig, Results and Conclusions"},{"year":"2022","title":"Pin Extrusion for Mechanical Joining from Orbital Formed Tailored Blanks with Local Material Pre-Distribution","publication_identifier":{"issn":["2504-4494"]},"author":[{"last_name":"Römisch","first_name":"David","full_name":"Römisch, David"},{"full_name":"Hetzel, Andreas","last_name":"Hetzel","first_name":"Andreas"},{"full_name":"Wituschek, Simon","last_name":"Wituschek","first_name":"Simon"},{"full_name":"Lechner, Michael","first_name":"Michael","last_name":"Lechner"},{"full_name":"Merklein, Marion","last_name":"Merklein","first_name":"Marion"}],"date_updated":"2023-01-02T11:01:34Z","publication_status":"published","intvolume":" 6","main_file_link":[{"open_access":"1"}],"article_number":"127","language":[{"iso":"eng"}],"doi":"10.3390/jmmp6060127","publication":"Journal of Manufacturing and Materials Processing","issue":"6","abstract":[{"lang":"eng","text":"Pin extrusion is a common process to realise pin structures in different geometrical dimensions for a subsequent joining operation. Nevertheless, the process of pin extrusion offers process limits regarding sheet thinning as a consequence of the punch penetration depth into the sheet. Thereby, cracks at the residual sheet thickness can occur during strength tests, resulting in a failure of the complete joint due to severe thinning. Therefore, measures have to be taken into account to reduce the thinning. One possibility is the application of orbital formed tailored blanks with a local material pre-distribution, which allows a higher sheet thickness in the desired area. Within this contribution, the novel approach of a process combination of orbital forming and pin extrusion is investigated. To reveal the potential of a local material pre-distribution, conventional specimens are compared with previously orbital formed components. Relevant parameters such as the residual sheet thickness, the pin height as well as the average hardness values are compared. The results show a significant positive influence of a local material pre-distribution on the residual sheet thickness as well as the resulting pin height. Furthermore, the strain hardening during orbital forming can be seen as an additional advantage. To conclude the results, the process limits of conventional pin extrusion can be expanded significantly by the application of specimens with a local material pre-distribution."}],"date_created":"2022-12-06T18:56:24Z","keyword":["Industrial and Manufacturing Engineering","Mechanical Engineering","Mechanics of Materials"],"type":"journal_article","department":[{"_id":"630"}],"status":"public","_id":"34248","publisher":"MDPI AG","user_id":"14931","volume":6,"citation":{"ieee":"D. Römisch, A. Hetzel, S. Wituschek, M. Lechner, and M. Merklein, “Pin Extrusion for Mechanical Joining from Orbital Formed Tailored Blanks with Local Material Pre-Distribution,” Journal of Manufacturing and Materials Processing, vol. 6, no. 6, Art. no. 127, 2022, doi: 10.3390/jmmp6060127.","apa":"Römisch, D., Hetzel, A., Wituschek, S., Lechner, M., & Merklein, M. (2022). Pin Extrusion for Mechanical Joining from Orbital Formed Tailored Blanks with Local Material Pre-Distribution. Journal of Manufacturing and Materials Processing, 6(6), Article 127. https://doi.org/10.3390/jmmp6060127","chicago":"Römisch, David, Andreas Hetzel, Simon Wituschek, Michael Lechner, and Marion Merklein. “Pin Extrusion for Mechanical Joining from Orbital Formed Tailored Blanks with Local Material Pre-Distribution.” Journal of Manufacturing and Materials Processing 6, no. 6 (2022). https://doi.org/10.3390/jmmp6060127.","short":"D. Römisch, A. Hetzel, S. Wituschek, M. Lechner, M. Merklein, Journal of Manufacturing and Materials Processing 6 (2022).","mla":"Römisch, David, et al. “Pin Extrusion for Mechanical Joining from Orbital Formed Tailored Blanks with Local Material Pre-Distribution.” Journal of Manufacturing and Materials Processing, vol. 6, no. 6, 127, MDPI AG, 2022, doi:10.3390/jmmp6060127.","bibtex":"@article{Römisch_Hetzel_Wituschek_Lechner_Merklein_2022, title={Pin Extrusion for Mechanical Joining from Orbital Formed Tailored Blanks with Local Material Pre-Distribution}, volume={6}, DOI={10.3390/jmmp6060127}, number={6127}, journal={Journal of Manufacturing and Materials Processing}, publisher={MDPI AG}, author={Römisch, David and Hetzel, Andreas and Wituschek, Simon and Lechner, Michael and Merklein, Marion}, year={2022} }","ama":"Römisch D, Hetzel A, Wituschek S, Lechner M, Merklein M. Pin Extrusion for Mechanical Joining from Orbital Formed Tailored Blanks with Local Material Pre-Distribution. Journal of Manufacturing and Materials Processing. 2022;6(6). doi:10.3390/jmmp6060127"},"project":[{"grant_number":"418701707","_id":"130","name":"TRR 285: TRR 285"},{"_id":"133","name":"TRR 285 - C: TRR 285 - Project Area C"},{"name":"TRR 285 – C01: TRR 285 - Subproject C01","_id":"145"},{"_id":"146","name":"TRR 285 – C02: TRR 285 - Subproject C02"}],"oa":"1"},{"intvolume":" 926","publication_status":"published","date_updated":"2023-01-02T11:13:59Z","publication_identifier":{"issn":["1662-9795"]},"author":[{"full_name":"Köhler, Daniel","first_name":"Daniel","last_name":"Köhler"},{"first_name":"Richard","last_name":"Stephan","full_name":"Stephan, Richard"},{"first_name":"Robert","last_name":"Kupfer","full_name":"Kupfer, Robert"},{"last_name":"Troschitz","first_name":"Juliane","full_name":"Troschitz, Juliane"},{"full_name":"Brosius, Alexander","first_name":"Alexander","last_name":"Brosius"},{"last_name":"Gude","first_name":"Maik","full_name":"Gude, Maik"}],"year":"2022","title":"Investigations on Combined in situ CT and Acoustic Analysis during Clinching","doi":"10.4028/p-32330d","language":[{"iso":"eng"}],"abstract":[{"lang":"eng","text":"Clinching is a cost efficient method for joining components in series production. To assure the clinch point’s quality, the force displacement curve during clinching or the bottom thickness are monitored. The most significant geometrical characteristics of the clinch point, neck thickness and undercut, are usually tested destructively by microsectioning. However, micrograph preparation goes ahead with a resetting of elastic deformations and crack-closing after unloading. To generate a comprehensive knowledge of the clinch point’s inner geometry under load, in-situ computed tomography (CT) and acoustic testing (TDA) can be combined. While the TDA is highly sensitive to the inner state of the clinch point, it could detect critical events like crack development during loading. If such events are indicated, the loading process is stopped and a stepped in-situ CT of the following crack and deformation development is performed. In this paper, the concept is applied to the process of clinching itself, providing a detailed three-dimensional insight in the development of the joining zone. A test set-up is used which allows a stepwise clinching of two aluminium sheets EN AW 6014. Furthermore, this set-up is positioned within a CT system. In order to minimize X-ray absorption, a beryllium cylinder is used within the set-up frame and clinching tools are made from Si3N4. The actuator and sensor necessary for the TDA are integrated in the set-up. In regular process steps, the clinching process is interrupted in order to perform a TDA and a CT scan. In order to enhance the visibility of the interface, a thin tin layer is positioned between the sheets prior clinching. It is shown, that the test-set up allows a monitoring of the dynamic behaviour of the specimen during clinching while the CT scans visualize the inner geometry and material flow non-destructively."}],"publication":"Key Engineering Materials","department":[{"_id":"630"}],"keyword":["Mechanical Engineering","Mechanics of Materials","General Materials Science"],"type":"conference","date_created":"2022-12-07T16:38:44Z","status":"public","volume":926,"user_id":"14931","_id":"34280","publisher":"Trans Tech Publications, Ltd.","page":"1489-1497","project":[{"_id":"130","grant_number":"418701707","name":"TRR 285: TRR 285"},{"name":"TRR 285 - C: TRR 285 - Project Area C","_id":"133"},{"_id":"148","name":"TRR 285 – C04: TRR 285 - Subproject C04"}],"citation":{"ama":"Köhler D, Stephan R, Kupfer R, Troschitz J, Brosius A, Gude M. Investigations on Combined in situ CT and Acoustic Analysis during Clinching. In: Key Engineering Materials. Vol 926. Trans Tech Publications, Ltd.; 2022:1489-1497. doi:10.4028/p-32330d","bibtex":"@inproceedings{Köhler_Stephan_Kupfer_Troschitz_Brosius_Gude_2022, title={Investigations on Combined in situ CT and Acoustic Analysis during Clinching}, volume={926}, DOI={10.4028/p-32330d}, booktitle={Key Engineering Materials}, publisher={Trans Tech Publications, Ltd.}, author={Köhler, Daniel and Stephan, Richard and Kupfer, Robert and Troschitz, Juliane and Brosius, Alexander and Gude, Maik}, year={2022}, pages={1489–1497} }","mla":"Köhler, Daniel, et al. “Investigations on Combined in Situ CT and Acoustic Analysis during Clinching.” Key Engineering Materials, vol. 926, Trans Tech Publications, Ltd., 2022, pp. 1489–97, doi:10.4028/p-32330d.","short":"D. Köhler, R. Stephan, R. Kupfer, J. Troschitz, A. Brosius, M. Gude, in: Key Engineering Materials, Trans Tech Publications, Ltd., 2022, pp. 1489–1497.","chicago":"Köhler, Daniel, Richard Stephan, Robert Kupfer, Juliane Troschitz, Alexander Brosius, and Maik Gude. “Investigations on Combined in Situ CT and Acoustic Analysis during Clinching.” In Key Engineering Materials, 926:1489–97. Trans Tech Publications, Ltd., 2022. https://doi.org/10.4028/p-32330d.","apa":"Köhler, D., Stephan, R., Kupfer, R., Troschitz, J., Brosius, A., & Gude, M. (2022). Investigations on Combined in situ CT and Acoustic Analysis during Clinching. Key Engineering Materials, 926, 1489–1497. https://doi.org/10.4028/p-32330d","ieee":"D. Köhler, R. Stephan, R. Kupfer, J. Troschitz, A. Brosius, and M. Gude, “Investigations on Combined in situ CT and Acoustic Analysis during Clinching,” in Key Engineering Materials, 2022, vol. 926, pp. 1489–1497, doi: 10.4028/p-32330d."}},{"language":[{"iso":"eng"}],"doi":"10.1080/15376494.2022.2140233","title":"Numerical fatigue life prediction of corroded and non-corroded clinched joints","year":"2022","publication_identifier":{"issn":["1537-6494","1537-6532"]},"author":[{"last_name":"Harzheim","first_name":"Sven","full_name":"Harzheim, Sven"},{"full_name":"Hofmann, Martin","first_name":"Martin","last_name":"Hofmann"},{"full_name":"Wallmersperger, Thomas","last_name":"Wallmersperger","first_name":"Thomas"}],"date_updated":"2023-01-02T11:10:49Z","publication_status":"published","date_created":"2022-12-07T10:03:17Z","keyword":["Mechanical Engineering","Mechanics of Materials","General Materials Science","General Mathematics","Civil and Structural Engineering"],"type":"journal_article","department":[{"_id":"630"}],"publication":"Mechanics of Advanced Materials and Structures","abstract":[{"text":"Mechanical clinching is used to create lightweight hybrid structures. In order to estimate the service life of clinched components, its fatigue properties need to be known under different mechanical loading conditions. In addition to fatigue, corrosion is another factor that affects the fatigue life of clinched joints. In the literature, many corrosion and high-cycle fatigue damage models exist. However, little is known about how both phenomena interact in clinched joints. In this article, the influence of galvanic corrosion on clinched EN AW-6014/HCT590X + Z sheets on the fatigue life is investigated by means of numerical simulations and experimental results. An accurate prediction of the Wöhler lines of non-corroded and pre-corroded clinched specimens is shown.","lang":"eng"}],"page":"1-6","_id":"34261","publisher":"Informa UK Limited","user_id":"14931","status":"public","citation":{"mla":"Harzheim, Sven, et al. “Numerical Fatigue Life Prediction of Corroded and Non-Corroded Clinched Joints.” Mechanics of Advanced Materials and Structures, Informa UK Limited, 2022, pp. 1–6, doi:10.1080/15376494.2022.2140233.","bibtex":"@article{Harzheim_Hofmann_Wallmersperger_2022, title={Numerical fatigue life prediction of corroded and non-corroded clinched joints}, DOI={10.1080/15376494.2022.2140233}, journal={Mechanics of Advanced Materials and Structures}, publisher={Informa UK Limited}, author={Harzheim, Sven and Hofmann, Martin and Wallmersperger, Thomas}, year={2022}, pages={1–6} }","ama":"Harzheim S, Hofmann M, Wallmersperger T. Numerical fatigue life prediction of corroded and non-corroded clinched joints. Mechanics of Advanced Materials and Structures. Published online 2022:1-6. doi:10.1080/15376494.2022.2140233","ieee":"S. Harzheim, M. Hofmann, and T. Wallmersperger, “Numerical fatigue life prediction of corroded and non-corroded clinched joints,” Mechanics of Advanced Materials and Structures, pp. 1–6, 2022, doi: 10.1080/15376494.2022.2140233.","apa":"Harzheim, S., Hofmann, M., & Wallmersperger, T. (2022). Numerical fatigue life prediction of corroded and non-corroded clinched joints. Mechanics of Advanced Materials and Structures, 1–6. https://doi.org/10.1080/15376494.2022.2140233","chicago":"Harzheim, Sven, Martin Hofmann, and Thomas Wallmersperger. “Numerical Fatigue Life Prediction of Corroded and Non-Corroded Clinched Joints.” Mechanics of Advanced Materials and Structures, 2022, 1–6. https://doi.org/10.1080/15376494.2022.2140233.","short":"S. Harzheim, M. Hofmann, T. Wallmersperger, Mechanics of Advanced Materials and Structures (2022) 1–6."},"project":[{"name":"TRR 285: TRR 285","grant_number":"418701707","_id":"130"},{"name":"TRR 285 - B: TRR 285 - Project Area B","_id":"132"},{"_id":"142","name":"TRR 285 – B03: TRR 285 - Subproject B03"}]},{"abstract":[{"lang":"eng","text":"Abstract\r\n The round robin test investigated the reliability users can expect for AlSi10Mg additive manufactured specimens by laser powder bed fusion through examining powder quality, process parameter, microstructure defects, strength and fatigue. Besides for one outlier, expected static material properties could be found. Optical microstructure inspection was beneficial to determine true porosity and porosity types to explain the occurring scatter in properties. Fractographic analyses reveal that the fatigue crack propagation starts at the rough as-built surface for all specimens. Statistical analysis of the scatter in fatigue using statistical derived safety factors concludes that at a stress of 36.87 MPa the fatigue limit of 107 cycles could be reached for all specimen with a survival probability of 99.999 %."}],"issue":"10","publication":"Practical Metallography","keyword":["Metals and Alloys","Mechanics of Materials","Condensed Matter Physics","Electronic","Optical and Magnetic Materials"],"type":"journal_article","date_created":"2022-10-11T13:15:48Z","intvolume":" 59","date_updated":"2023-01-04T14:48:17Z","publication_status":"published","author":[{"last_name":"Schneider","first_name":"M.","full_name":"Schneider, M."},{"full_name":"Bettge, D.","first_name":"D.","last_name":"Bettge"},{"full_name":"Binder, M.","last_name":"Binder","first_name":"M."},{"first_name":"K.","last_name":"Dollmeier","full_name":"Dollmeier, K."},{"first_name":"Malte","last_name":"Dreyer","orcid":"0000-0001-9560-9510","full_name":"Dreyer, Malte","id":"66695"},{"full_name":"Hilgenberg, K.","last_name":"Hilgenberg","first_name":"K."},{"last_name":"Klöden","first_name":"B.","full_name":"Klöden, B."},{"first_name":"T.","last_name":"Schlingmann","full_name":"Schlingmann, T."},{"full_name":"Schmidt, J.","last_name":"Schmidt","first_name":"J."}],"publication_identifier":{"issn":["2195-8599","0032-678X"]},"title":"Reproducibility and Scattering in Additive Manufacturing: Results from a Round Robin on PBF-LB/M AlSi10Mg Alloy","year":"2022","doi":"10.1515/pm-2022-1018","language":[{"iso":"eng"}],"citation":{"apa":"Schneider, M., Bettge, D., Binder, M., Dollmeier, K., Dreyer, M., Hilgenberg, K., Klöden, B., Schlingmann, T., & Schmidt, J. (2022). Reproducibility and Scattering in Additive Manufacturing: Results from a Round Robin on PBF-LB/M AlSi10Mg Alloy. Practical Metallography, 59(10), 580–614. https://doi.org/10.1515/pm-2022-1018","ieee":"M. Schneider et al., “Reproducibility and Scattering in Additive Manufacturing: Results from a Round Robin on PBF-LB/M AlSi10Mg Alloy,” Practical Metallography, vol. 59, no. 10, pp. 580–614, 2022, doi: 10.1515/pm-2022-1018.","short":"M. Schneider, D. Bettge, M. Binder, K. Dollmeier, M. Dreyer, K. Hilgenberg, B. Klöden, T. Schlingmann, J. Schmidt, Practical Metallography 59 (2022) 580–614.","chicago":"Schneider, M., D. Bettge, M. Binder, K. Dollmeier, Malte Dreyer, K. Hilgenberg, B. Klöden, T. Schlingmann, and J. Schmidt. “Reproducibility and Scattering in Additive Manufacturing: Results from a Round Robin on PBF-LB/M AlSi10Mg Alloy.” Practical Metallography 59, no. 10 (2022): 580–614. https://doi.org/10.1515/pm-2022-1018.","mla":"Schneider, M., et al. “Reproducibility and Scattering in Additive Manufacturing: Results from a Round Robin on PBF-LB/M AlSi10Mg Alloy.” Practical Metallography, vol. 59, no. 10, Walter de Gruyter GmbH, 2022, pp. 580–614, doi:10.1515/pm-2022-1018.","ama":"Schneider M, Bettge D, Binder M, et al. Reproducibility and Scattering in Additive Manufacturing: Results from a Round Robin on PBF-LB/M AlSi10Mg Alloy. Practical Metallography. 2022;59(10):580-614. doi:10.1515/pm-2022-1018","bibtex":"@article{Schneider_Bettge_Binder_Dollmeier_Dreyer_Hilgenberg_Klöden_Schlingmann_Schmidt_2022, title={Reproducibility and Scattering in Additive Manufacturing: Results from a Round Robin on PBF-LB/M AlSi10Mg Alloy}, volume={59}, DOI={10.1515/pm-2022-1018}, number={10}, journal={Practical Metallography}, publisher={Walter de Gruyter GmbH}, author={Schneider, M. and Bettge, D. and Binder, M. and Dollmeier, K. and Dreyer, Malte and Hilgenberg, K. and Klöden, B. and Schlingmann, T. and Schmidt, J.}, year={2022}, pages={580–614} }"},"status":"public","volume":59,"user_id":"66695","_id":"33694","publisher":"Walter de Gruyter GmbH","page":"580-614"},{"citation":{"apa":"Riedl, T., Kunnathully, V., Trapp, A., Langer, T., Reuter, D., & Lindner, J. (2022). Size‐Dependent Strain Relaxation in InAs Quantum Dots on Top of GaAs(111)A Nanopillars. Advanced Materials Interfaces, 9(11), Article 2102159. https://doi.org/10.1002/admi.202102159","ieee":"T. Riedl, V. Kunnathully, A. Trapp, T. Langer, D. Reuter, and J. Lindner, “Size‐Dependent Strain Relaxation in InAs Quantum Dots on Top of GaAs(111)A Nanopillars,” Advanced Materials Interfaces, vol. 9, no. 11, Art. no. 2102159, 2022, doi: 10.1002/admi.202102159.","chicago":"Riedl, Thomas, Vinay Kunnathully, Alexander Trapp, Timo Langer, Dirk Reuter, and Jörg Lindner. “Size‐Dependent Strain Relaxation in InAs Quantum Dots on Top of GaAs(111)A Nanopillars.” Advanced Materials Interfaces 9, no. 11 (2022). https://doi.org/10.1002/admi.202102159.","short":"T. Riedl, V. Kunnathully, A. Trapp, T. Langer, D. Reuter, J. Lindner, Advanced Materials Interfaces 9 (2022).","mla":"Riedl, Thomas, et al. “Size‐Dependent Strain Relaxation in InAs Quantum Dots on Top of GaAs(111)A Nanopillars.” Advanced Materials Interfaces, vol. 9, no. 11, 2102159, Wiley, 2022, doi:10.1002/admi.202102159.","ama":"Riedl T, Kunnathully V, Trapp A, Langer T, Reuter D, Lindner J. Size‐Dependent Strain Relaxation in InAs Quantum Dots on Top of GaAs(111)A Nanopillars. Advanced Materials Interfaces. 2022;9(11). doi:10.1002/admi.202102159","bibtex":"@article{Riedl_Kunnathully_Trapp_Langer_Reuter_Lindner_2022, title={Size‐Dependent Strain Relaxation in InAs Quantum Dots on Top of GaAs(111)A Nanopillars}, volume={9}, DOI={10.1002/admi.202102159}, number={112102159}, journal={Advanced Materials Interfaces}, publisher={Wiley}, author={Riedl, Thomas and Kunnathully, Vinay and Trapp, Alexander and Langer, Timo and Reuter, Dirk and Lindner, Jörg}, year={2022} }"},"volume":9,"user_id":"77496","publisher":"Wiley","_id":"34053","status":"public","department":[{"_id":"15"},{"_id":"230"}],"type":"journal_article","keyword":["Mechanical Engineering","Mechanics of Materials"],"date_created":"2022-11-10T14:11:18Z","publication":"Advanced Materials Interfaces","issue":"11","doi":"10.1002/admi.202102159","language":[{"iso":"eng"}],"article_number":"2102159","intvolume":" 9","publication_status":"published","date_updated":"2023-01-10T12:09:09Z","author":[{"id":"36950","first_name":"Thomas","last_name":"Riedl","full_name":"Riedl, Thomas"},{"first_name":"Vinay","last_name":"Kunnathully","full_name":"Kunnathully, Vinay"},{"last_name":"Trapp","first_name":"Alexander","full_name":"Trapp, Alexander"},{"first_name":"Timo","last_name":"Langer","full_name":"Langer, Timo"},{"id":"37763","last_name":"Reuter","first_name":"Dirk","full_name":"Reuter, Dirk"},{"first_name":"Jörg","last_name":"Lindner","full_name":"Lindner, Jörg","id":"20797"}],"publication_identifier":{"issn":["2196-7350","2196-7350"]},"title":"Size‐Dependent Strain Relaxation in InAs Quantum Dots on Top of GaAs(111)A Nanopillars","year":"2022"},{"quality_controlled":"1","citation":{"ama":"Bielak CR, Böhnke M, Bobbert M, Meschut G. Experimental and Numerical Investigation on Manufacturing-Induced Pre-Strain on the Load-Bearing Capacity of Clinched Joints. Key Engineering Materials. 2022;926:1516-1526. doi:10.4028/p-5d009y","bibtex":"@article{Bielak_Böhnke_Bobbert_Meschut_2022, title={Experimental and Numerical Investigation on Manufacturing-Induced Pre-Strain on the Load-Bearing Capacity of Clinched Joints}, volume={926}, DOI={10.4028/p-5d009y}, journal={Key Engineering Materials}, publisher={Trans Tech Publications, Ltd.}, author={Bielak, Christian Roman and Böhnke, Max and Bobbert, Mathias and Meschut, Gerson}, year={2022}, pages={1516–1526} }","mla":"Bielak, Christian Roman, et al. “Experimental and Numerical Investigation on Manufacturing-Induced Pre-Strain on the Load-Bearing Capacity of Clinched Joints.” Key Engineering Materials, vol. 926, Trans Tech Publications, Ltd., 2022, pp. 1516–26, doi:10.4028/p-5d009y.","chicago":"Bielak, Christian Roman, Max Böhnke, Mathias Bobbert, and Gerson Meschut. “Experimental and Numerical Investigation on Manufacturing-Induced Pre-Strain on the Load-Bearing Capacity of Clinched Joints.” Key Engineering Materials 926 (2022): 1516–26. https://doi.org/10.4028/p-5d009y.","short":"C.R. Bielak, M. Böhnke, M. Bobbert, G. Meschut, Key Engineering Materials 926 (2022) 1516–1526.","apa":"Bielak, C. R., Böhnke, M., Bobbert, M., & Meschut, G. (2022). Experimental and Numerical Investigation on Manufacturing-Induced Pre-Strain on the Load-Bearing Capacity of Clinched Joints. Key Engineering Materials, 926, 1516–1526. https://doi.org/10.4028/p-5d009y","ieee":"C. R. Bielak, M. Böhnke, M. Bobbert, and G. Meschut, “Experimental and Numerical Investigation on Manufacturing-Induced Pre-Strain on the Load-Bearing Capacity of Clinched Joints,” Key Engineering Materials, vol. 926, pp. 1516–1526, 2022, doi: 10.4028/p-5d009y."},"user_id":"7850","volume":926,"page":"1516-1526","_id":"32413","publisher":"Trans Tech Publications, Ltd.","status":"public","keyword":["Mechanical Engineering","Mechanics of Materials","General Materials Science"],"type":"journal_article","department":[{"_id":"157"}],"date_created":"2022-07-25T11:16:15Z","abstract":[{"text":"Background. Clinching is a conventional cold forming process in which two or more sheets can be joined without auxiliary parts. A pre-forming of the parts to be joined, which is introduced by previous manufacturing steps, has an influence on the joining result. When considering the suitability for joining with regard to the formability of the materials, the influence of the preforming steps must be taken into account. The influences of strain hardening and sheet thickness on the joining properties must be investigated. In this context, a Finite Element Method (FEM) based metamodel analysis of the clinching process was carried out in [1] to investigate the robustness of the clinching process with respect to the different material pre-strains. In [2], the method was extended to the load bearing simulation.Procedure. The metamodel from preliminary work based on various FE models, which predicts the load-bearing capacity of a clinched joint influenced by pre-straining, is compared here with experimental data and the accuracy of the metamodel prediction is discussed. For this purpose an experimental procedure was further develop which allows the preforming of metal sheets from which joining specimens can be separated with a certain degree of unidirectional deformation. In the study, the procedure for preparing the joint specimens and the results of the loading tests are presented. Different possible relevant pre-strain combinations are investigated and compared with the simulation results, to validate the FE models and choose suitable metamodel.","lang":"eng"}],"publication":"Key Engineering Materials","doi":"10.4028/p-5d009y","language":[{"iso":"eng"}],"publication_status":"published","date_updated":"2023-01-12T14:22:52Z","intvolume":" 926","title":"Experimental and Numerical Investigation on Manufacturing-Induced Pre-Strain on the Load-Bearing Capacity of Clinched Joints","year":"2022","author":[{"full_name":"Bielak, Christian Roman","last_name":"Bielak","first_name":"Christian Roman","id":"34782"},{"last_name":"Böhnke","first_name":"Max","full_name":"Böhnke, Max","id":"45779"},{"id":"7850","full_name":"Bobbert, Mathias","last_name":"Bobbert","first_name":"Mathias"},{"id":"32056","full_name":"Meschut, Gerson","orcid":"0000-0002-2763-1246","first_name":"Gerson","last_name":"Meschut"}],"publication_identifier":{"issn":["1662-9795"]}},{"citation":{"apa":"Duderija, B., González-Orive, A., Schmidt, H. C., Calderón, J. C., Hordych, I., Maier, H. J., Homberg, W., & Grundmeier, G. (2022). Electrografting of BTSE: Zn films for advanced steel-aluminum joining by plastic deformation. Journal of Advanced Joining Processes, 7, Article 100137. https://doi.org/10.1016/j.jajp.2022.100137","mla":"Duderija, B., et al. “Electrografting of BTSE: Zn Films for Advanced Steel-Aluminum Joining by Plastic Deformation.” Journal of Advanced Joining Processes, vol. 7, 100137, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100137.","ieee":"B. Duderija et al., “Electrografting of BTSE: Zn films for advanced steel-aluminum joining by plastic deformation,” Journal of Advanced Joining Processes, vol. 7, Art. no. 100137, 2022, doi: 10.1016/j.jajp.2022.100137.","ama":"Duderija B, González-Orive A, Schmidt HC, et al. Electrografting of BTSE: Zn films for advanced steel-aluminum joining by plastic deformation. Journal of Advanced Joining Processes. 2022;7. doi:10.1016/j.jajp.2022.100137","short":"B. Duderija, A. González-Orive, H.C. Schmidt, J.C. Calderón, I. Hordych, H.J. Maier, W. Homberg, G. Grundmeier, Journal of Advanced Joining Processes 7 (2022).","chicago":"Duderija, B., A. González-Orive, H.C. Schmidt, J.C. Calderón, I. Hordych, H.J. Maier, W. Homberg, and G. Grundmeier. “Electrografting of BTSE: Zn Films for Advanced Steel-Aluminum Joining by Plastic Deformation.” Journal of Advanced Joining Processes 7 (2022). https://doi.org/10.1016/j.jajp.2022.100137.","bibtex":"@article{Duderija_González-Orive_Schmidt_Calderón_Hordych_Maier_Homberg_Grundmeier_2022, title={Electrografting of BTSE: Zn films for advanced steel-aluminum joining by plastic deformation}, volume={7}, DOI={10.1016/j.jajp.2022.100137}, number={100137}, journal={Journal of Advanced Joining Processes}, publisher={Elsevier BV}, author={Duderija, B. and González-Orive, A. and Schmidt, H.C. and Calderón, J.C. and Hordych, I. and Maier, H.J. and Homberg, W. and Grundmeier, G.}, year={2022} }"},"status":"public","_id":"43021","publisher":"Elsevier BV","user_id":"54863","volume":7,"publication":"Journal of Advanced Joining Processes","date_created":"2023-03-14T13:02:55Z","type":"journal_article","keyword":["Mechanical Engineering","Mechanics of Materials","Engineering (miscellaneous)","Chemical Engineering (miscellaneous)"],"department":[{"_id":"321"},{"_id":"302"}],"year":"2022","title":"Electrografting of BTSE: Zn films for advanced steel-aluminum joining by plastic deformation","author":[{"first_name":"B.","last_name":"Duderija","full_name":"Duderija, B."},{"last_name":"González-Orive","first_name":"A.","full_name":"González-Orive, A."},{"last_name":"Schmidt","first_name":"H.C.","full_name":"Schmidt, H.C."},{"full_name":"Calderón, J.C.","last_name":"Calderón","first_name":"J.C."},{"last_name":"Hordych","first_name":"I.","full_name":"Hordych, I."},{"last_name":"Maier","first_name":"H.J.","full_name":"Maier, H.J."},{"full_name":"Homberg, W.","first_name":"W.","last_name":"Homberg"},{"full_name":"Grundmeier, G.","last_name":"Grundmeier","first_name":"G."}],"publication_identifier":{"issn":["2666-3309"]},"date_updated":"2024-02-06T12:33:20Z","publication_status":"published","intvolume":" 7","article_number":"100137","language":[{"iso":"eng"}],"doi":"10.1016/j.jajp.2022.100137"},{"status":"public","_id":"31828","publisher":"Elsevier BV","user_id":"32340","volume":5,"citation":{"chicago":"Kupfer, Robert, Daniel Köhler, David Römisch, Simon Wituschek, Lars Ewenz, Jan Kalich, Deborah Weiß, et al. “Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties.” Journal of Advanced Joining Processes 5 (2022). https://doi.org/10.1016/j.jajp.2022.100108.","ama":"Kupfer R, Köhler D, Römisch D, et al. Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties. Journal of Advanced Joining Processes. 2022;5. doi:10.1016/j.jajp.2022.100108","short":"R. Kupfer, D. Köhler, D. Römisch, S. Wituschek, L. Ewenz, J. Kalich, D. Weiß, B. Sadeghian, M. Busch, J. Krüger, M. Neuser, O. Grydin, M. Böhnke, C.R. Bielak, J. Troschitz, Journal of Advanced Joining Processes 5 (2022).","bibtex":"@article{Kupfer_Köhler_Römisch_Wituschek_Ewenz_Kalich_Weiß_Sadeghian_Busch_Krüger_et al._2022, title={Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties}, volume={5}, DOI={10.1016/j.jajp.2022.100108}, number={100108}, journal={Journal of Advanced Joining Processes}, publisher={Elsevier BV}, author={Kupfer, Robert and Köhler, Daniel and Römisch, David and Wituschek, Simon and Ewenz, Lars and Kalich, Jan and Weiß, Deborah and Sadeghian, Behdad and Busch, Matthias and Krüger, Jan and et al.}, year={2022} }","mla":"Kupfer, Robert, et al. “Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties.” Journal of Advanced Joining Processes, vol. 5, 100108, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100108.","apa":"Kupfer, R., Köhler, D., Römisch, D., Wituschek, S., Ewenz, L., Kalich, J., Weiß, D., Sadeghian, B., Busch, M., Krüger, J., Neuser, M., Grydin, O., Böhnke, M., Bielak, C. R., & Troschitz, J. (2022). Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties. Journal of Advanced Joining Processes, 5, Article 100108. https://doi.org/10.1016/j.jajp.2022.100108","ieee":"R. Kupfer et al., “Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties,” Journal of Advanced Joining Processes, vol. 5, Art. no. 100108, 2022, doi: 10.1016/j.jajp.2022.100108."},"quality_controlled":"1","project":[{"_id":"130","grant_number":"418701707","name":"TRR 285: TRR 285"},{"name":"TRR 285 - A: TRR 285 - Project Area A","_id":"131"},{"name":"TRR 142 - A02: TRR 142 - Subproject A02","grant_number":"231447078","_id":"59"}],"year":"2022","title":"Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties","author":[{"last_name":"Kupfer","first_name":"Robert","full_name":"Kupfer, Robert"},{"full_name":"Köhler, Daniel","first_name":"Daniel","last_name":"Köhler"},{"first_name":"David","last_name":"Römisch","full_name":"Römisch, David"},{"full_name":"Wituschek, Simon","first_name":"Simon","last_name":"Wituschek"},{"first_name":"Lars","last_name":"Ewenz","full_name":"Ewenz, Lars"},{"full_name":"Kalich, Jan","last_name":"Kalich","first_name":"Jan"},{"full_name":"Weiß, Deborah","first_name":"Deborah","last_name":"Weiß","id":"45673"},{"first_name":"Behdad","last_name":"Sadeghian","full_name":"Sadeghian, Behdad"},{"first_name":"Matthias","last_name":"Busch","full_name":"Busch, Matthias"},{"first_name":"Jan","last_name":"Krüger","full_name":"Krüger, Jan"},{"full_name":"Neuser, Moritz","first_name":"Moritz","last_name":"Neuser","id":"32340"},{"first_name":"Olexandr","last_name":"Grydin","full_name":"Grydin, Olexandr","id":"43822"},{"id":"45779","full_name":"Böhnke, Max","first_name":"Max","last_name":"Böhnke"},{"id":"34782","full_name":"Bielak, Christian Roman","last_name":"Bielak","first_name":"Christian Roman"},{"last_name":"Troschitz","first_name":"Juliane","full_name":"Troschitz, Juliane"}],"publication_identifier":{"issn":["2666-3309"]},"date_updated":"2024-03-14T15:22:46Z","publication_status":"published","intvolume":" 5","article_number":"100108","language":[{"iso":"eng"}],"doi":"10.1016/j.jajp.2022.100108","publication":"Journal of Advanced Joining Processes","date_created":"2022-06-09T06:23:00Z","type":"journal_article","keyword":["Mechanical Engineering","Mechanics of Materials","Engineering (miscellaneous)","Chemical Engineering (miscellaneous)"],"department":[{"_id":"157"},{"_id":"158"}]},{"language":[{"iso":"eng"}],"doi":"10.29391/2022.101.015","publication_identifier":{"issn":["0043-2296","2689-0445"]},"author":[{"id":"22483","full_name":"Böhne, Christoph","last_name":"Böhne","first_name":"Christoph"},{"id":"32056","full_name":"Meschut, Gerson","orcid":"0000-0002-2763-1246","last_name":"Meschut","first_name":"Gerson"},{"first_name":"MAX","last_name":"BIEGLER","full_name":"BIEGLER, MAX"},{"last_name":"RETHMEIER","first_name":"MICHAEL","full_name":"RETHMEIER, MICHAEL"}],"year":"2022","title":"The Influence of Electrode Indentation Rate on LME Formation during RSW","intvolume":" 101","publication_status":"published","date_updated":"2024-03-18T12:43:49Z","date_created":"2024-03-18T11:56:12Z","department":[{"_id":"157"}],"keyword":["Metals and Alloys","Mechanical Engineering","Mechanics of Materials"],"type":"journal_article","issue":"7","publication":"Welding Journal","abstract":[{"text":"During resistance spot welding of zinc-coated advanced high-strength steels (AHSSs) for automotive production, liquid metal embrittlement (LME) cracking may occur in the event of a combination of various unfavorable influences. In this study, the interactions of different welding current levels and weld times on the tendency for LME cracking in third-generation AHSSs were investigated. LME manifested itself as high-penetration cracks around the circumference of the spot welds for welding currents closely below the expulsion limit. At the same time, the observed tendency for LME cracking showed no direct correlation with the overall heat input of the investigated welding processes. To identify a reliable indicator of the tendency for LME cracking, the local strain rate at the origin of the observed cracks was analyzed over the course of the welding process via finite element simulation. While the local strain rate showed a good correlation with the process-specific LME cracking tendency, it was difficult to interpret due to its discontinuous course. Therefore, based on the experimental measurement of electrode displacement during welding, electrode indentation velocity was proposed as a descriptive indicator for quantifying cracking tendency.","lang":"eng"}],"publisher":"American Welding Society","_id":"52613","page":"197-207","volume":101,"user_id":"60398","status":"public","citation":{"chicago":"Böhne, Christoph, Gerson Meschut, MAX BIEGLER, and MICHAEL RETHMEIER. “The Influence of Electrode Indentation Rate on LME Formation during RSW.” Welding Journal 101, no. 7 (2022): 197–207. https://doi.org/10.29391/2022.101.015.","short":"C. Böhne, G. Meschut, M. BIEGLER, M. RETHMEIER, Welding Journal 101 (2022) 197–207.","apa":"Böhne, C., Meschut, G., BIEGLER, M., & RETHMEIER, M. (2022). The Influence of Electrode Indentation Rate on LME Formation during RSW. Welding Journal, 101(7), 197–207. https://doi.org/10.29391/2022.101.015","ieee":"C. Böhne, G. Meschut, M. BIEGLER, and M. RETHMEIER, “The Influence of Electrode Indentation Rate on LME Formation during RSW,” Welding Journal, vol. 101, no. 7, pp. 197–207, 2022, doi: 10.29391/2022.101.015.","ama":"Böhne C, Meschut G, BIEGLER M, RETHMEIER M. The Influence of Electrode Indentation Rate on LME Formation during RSW. Welding Journal. 2022;101(7):197-207. doi:10.29391/2022.101.015","bibtex":"@article{Böhne_Meschut_BIEGLER_RETHMEIER_2022, title={The Influence of Electrode Indentation Rate on LME Formation during RSW}, volume={101}, DOI={10.29391/2022.101.015}, number={7}, journal={Welding Journal}, publisher={American Welding Society}, author={Böhne, Christoph and Meschut, Gerson and BIEGLER, MAX and RETHMEIER, MICHAEL}, year={2022}, pages={197–207} }","mla":"Böhne, Christoph, et al. “The Influence of Electrode Indentation Rate on LME Formation during RSW.” Welding Journal, vol. 101, no. 7, American Welding Society, 2022, pp. 197–207, doi:10.29391/2022.101.015."},"quality_controlled":"1"},{"publication":"Journal of Advanced Joining Processes","abstract":[{"lang":"eng","text":"Clinching as a mechanical joining technique allows a fast and reliable joining of metal sheets in large-scale production. An efficient design and dimensioning of clinched joints requires a holistic understanding of the material, the joining process and the resulting properties of the joint. In this paper, the process chain for clinching metal sheets is described and experimental techniques are proposed to analyze the process-microstructure-property relationships from the sheet metal to the joined structure. At the example of clinching aluminum EN AW 6014, characterization methods are applied and discussed for the following characteristics: the mechanical properties of the sheet materials, the tribological behavior in the joining system, the joining process and the resulting material structure, the load-bearing behavior of the joint, the damage and degradation as well as the service life and crack growth behavior. The compilation of the characterization methods gives an overview on the advantages and weaknesses of the methods and the multiple interactions of material, process and properties during clinching. In addition, the results of the analyses on EN AW 6014 can be applied for parameterization and validation of simulations."}],"date_created":"2022-12-05T21:17:22Z","type":"journal_article","keyword":["Mechanical Engineering","Mechanics of Materials","Engineering (miscellaneous)","Chemical Engineering (miscellaneous)"],"department":[{"_id":"630"},{"_id":"158"}],"title":"Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties","year":"2022","author":[{"last_name":"Kupfer","first_name":"Robert","full_name":"Kupfer, Robert"},{"full_name":"Köhler, Daniel","last_name":"Köhler","first_name":"Daniel"},{"first_name":"David","last_name":"Römisch","full_name":"Römisch, David"},{"last_name":"Wituschek","first_name":"Simon","full_name":"Wituschek, Simon"},{"first_name":"Lars","last_name":"Ewenz","full_name":"Ewenz, Lars"},{"full_name":"Kalich, Jan","last_name":"Kalich","first_name":"Jan"},{"id":"45673","first_name":"Deborah","last_name":"Weiß","full_name":"Weiß, Deborah"},{"last_name":"Sadeghian","first_name":"Behdad","full_name":"Sadeghian, Behdad"},{"full_name":"Busch, Matthias","last_name":"Busch","first_name":"Matthias"},{"full_name":"Krüger, Jan Tobias","last_name":"Krüger","first_name":"Jan Tobias","orcid":"0000-0002-0827-9654","id":"44307"},{"first_name":"Moritz","last_name":"Neuser","full_name":"Neuser, Moritz","id":"32340"},{"id":"43822","full_name":"Grydin, Olexandr","last_name":"Grydin","first_name":"Olexandr"},{"id":"45779","first_name":"Max","last_name":"Böhnke","full_name":"Böhnke, Max"},{"full_name":"Bielak, Christian Roman","first_name":"Christian Roman","last_name":"Bielak","id":"34782"},{"first_name":"Juliane","last_name":"Troschitz","full_name":"Troschitz, Juliane"}],"publication_identifier":{"issn":["2666-3309"]},"date_updated":"2024-03-20T11:54:33Z","publication_status":"published","intvolume":" 5","article_number":"100108","language":[{"iso":"eng"}],"doi":"10.1016/j.jajp.2022.100108","citation":{"apa":"Kupfer, R., Köhler, D., Römisch, D., Wituschek, S., Ewenz, L., Kalich, J., Weiß, D., Sadeghian, B., Busch, M., Krüger, J. T., Neuser, M., Grydin, O., Böhnke, M., Bielak, C. R., & Troschitz, J. (2022). Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties. Journal of Advanced Joining Processes, 5, Article 100108. https://doi.org/10.1016/j.jajp.2022.100108","ieee":"R. Kupfer et al., “Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties,” Journal of Advanced Joining Processes, vol. 5, Art. no. 100108, 2022, doi: 10.1016/j.jajp.2022.100108.","chicago":"Kupfer, Robert, Daniel Köhler, David Römisch, Simon Wituschek, Lars Ewenz, Jan Kalich, Deborah Weiß, et al. “Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties.” Journal of Advanced Joining Processes 5 (2022). https://doi.org/10.1016/j.jajp.2022.100108.","short":"R. Kupfer, D. Köhler, D. Römisch, S. Wituschek, L. Ewenz, J. Kalich, D. Weiß, B. Sadeghian, M. Busch, J.T. Krüger, M. Neuser, O. Grydin, M. Böhnke, C.R. Bielak, J. Troschitz, Journal of Advanced Joining Processes 5 (2022).","mla":"Kupfer, Robert, et al. “Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties.” Journal of Advanced Joining Processes, vol. 5, 100108, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100108.","ama":"Kupfer R, Köhler D, Römisch D, et al. Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties. Journal of Advanced Joining Processes. 2022;5. doi:10.1016/j.jajp.2022.100108","bibtex":"@article{Kupfer_Köhler_Römisch_Wituschek_Ewenz_Kalich_Weiß_Sadeghian_Busch_Krüger_et al._2022, title={Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties}, volume={5}, DOI={10.1016/j.jajp.2022.100108}, number={100108}, journal={Journal of Advanced Joining Processes}, publisher={Elsevier BV}, author={Kupfer, Robert and Köhler, Daniel and Römisch, David and Wituschek, Simon and Ewenz, Lars and Kalich, Jan and Weiß, Deborah and Sadeghian, Behdad and Busch, Matthias and Krüger, Jan Tobias and et al.}, year={2022} }"},"quality_controlled":"1","project":[{"grant_number":"418701707","_id":"130","name":"TRR 285: TRR 285"},{"_id":"133","name":"TRR 285 - C: TRR 285 - Project Area C"},{"name":"TRR 285 – C04: TRR 285 - Subproject C04","_id":"148"},{"_id":"146","name":"TRR 285 – C02: TRR 285 - Subproject C02"},{"name":"TRR 285 – C01: TRR 285 - Subproject C01","_id":"145"},{"name":"TRR 285 - B: TRR 285 - Project Area B","_id":"132"},{"_id":"141","name":"TRR 285 – B02: TRR 285 - Subproject B02"},{"_id":"138","name":"TRR 285 – A04: TRR 285 - Subproject A04"},{"_id":"135","name":"TRR 285 – A01: TRR 285 - Subproject A01"},{"name":"TRR 285 – A02: TRR 285 - Subproject A02","_id":"136"},{"name":"TRR 285 – C05: TRR 285 - Subproject C05","_id":"149"},{"_id":"143","name":"TRR 285 – B04: TRR 285 - Subproject B04"}],"status":"public","publisher":"Elsevier BV","_id":"34215","user_id":"34782","volume":5},{"date_created":"2024-03-27T17:48:20Z","department":[{"_id":"728"}],"type":"journal_article","keyword":["Mechanical Engineering","Mechanics of Materials","Condensed Matter Physics","General Materials Science"],"publication":"Journal of Materials Research","issue":"9","extern":"1","abstract":[{"lang":"eng","text":"AbstractThe thermal decomposition of Zr(acac)4 is studied in a SiC-microreactor on the micro-second time scale. By utilizing synchrotron radiation and photoelectron photoion coincidence spectroscopy, six important zirconium intermediates, as for instance Zr(C5H7O2)2(C5H6O2), and Zr(C5H6O2)2, are identified in the gas phase for the first time. The adiabatic ionization thresholds of intermediately formed zirconium species are estimated and the main products of their thermal decomposition, acetylacetone, acetylallene and acetone are characterized unambiguously and isomer-selectively. Based on all detected intermediates, we deduce the predominant pyrolysis pathways of the precursor in the temperature range from 400 to 900 K. Our findings are complemented by numerical simulations of the flow field in the microreactor, which show that the choice of dilution gas significantly influences the temperature profile and residence times in the microreactor, such that helium provides a more uniform flow field than argon and should preferentially be used.\r\n Graphical abstract\r\n Using a soft ionization method coupled to velocity map imaging (VMI), leads to valuable insights in the thermal decomposition of Zr(C5H7O2)4, used in the synthesis of functional nanomaterials and ceramic coatings. Thanks to the use of a microreactor, important gas"}],"language":[{"iso":"eng"}],"doi":"10.1557/s43578-022-00566-6","publication_identifier":{"issn":["0884-2914","2044-5326"]},"author":[{"first_name":"Sebastian","last_name":"Grimm","full_name":"Grimm, Sebastian"},{"first_name":"Seung-Jin","last_name":"Baik","full_name":"Baik, Seung-Jin"},{"full_name":"Hemberger, Patrick","last_name":"Hemberger","first_name":"Patrick"},{"id":"94562","full_name":"Kasper, Tina","first_name":"Tina","last_name":"Kasper","orcid":"0000-0003-3993-5316 "},{"first_name":"Andreas M.","last_name":"Kempf","full_name":"Kempf, Andreas M."},{"first_name":"Burak","last_name":"Atakan","full_name":"Atakan, Burak"}],"year":"2022","title":"Insights into the decomposition of zirconium acetylacetonate using synchrotron radiation: Routes to the formation of volatile Zr-intermediates","intvolume":" 37","publication_status":"published","date_updated":"2024-03-27T17:49:03Z","citation":{"apa":"Grimm, S., Baik, S.-J., Hemberger, P., Kasper, T., Kempf, A. M., & Atakan, B. (2022). Insights into the decomposition of zirconium acetylacetonate using synchrotron radiation: Routes to the formation of volatile Zr-intermediates. Journal of Materials Research, 37(9), 1558–1575. https://doi.org/10.1557/s43578-022-00566-6","ieee":"S. Grimm, S.-J. Baik, P. Hemberger, T. Kasper, A. M. Kempf, and B. Atakan, “Insights into the decomposition of zirconium acetylacetonate using synchrotron radiation: Routes to the formation of volatile Zr-intermediates,” Journal of Materials Research, vol. 37, no. 9, pp. 1558–1575, 2022, doi: 10.1557/s43578-022-00566-6.","chicago":"Grimm, Sebastian, Seung-Jin Baik, Patrick Hemberger, Tina Kasper, Andreas M. Kempf, and Burak Atakan. “Insights into the Decomposition of Zirconium Acetylacetonate Using Synchrotron Radiation: Routes to the Formation of Volatile Zr-Intermediates.” Journal of Materials Research 37, no. 9 (2022): 1558–75. https://doi.org/10.1557/s43578-022-00566-6.","short":"S. Grimm, S.-J. Baik, P. Hemberger, T. Kasper, A.M. Kempf, B. Atakan, Journal of Materials Research 37 (2022) 1558–1575.","mla":"Grimm, Sebastian, et al. “Insights into the Decomposition of Zirconium Acetylacetonate Using Synchrotron Radiation: Routes to the Formation of Volatile Zr-Intermediates.” Journal of Materials Research, vol. 37, no. 9, Springer Science and Business Media LLC, 2022, pp. 1558–75, doi:10.1557/s43578-022-00566-6.","ama":"Grimm S, Baik S-J, Hemberger P, Kasper T, Kempf AM, Atakan B. Insights into the decomposition of zirconium acetylacetonate using synchrotron radiation: Routes to the formation of volatile Zr-intermediates. Journal of Materials Research. 2022;37(9):1558-1575. doi:10.1557/s43578-022-00566-6","bibtex":"@article{Grimm_Baik_Hemberger_Kasper_Kempf_Atakan_2022, title={Insights into the decomposition of zirconium acetylacetonate using synchrotron radiation: Routes to the formation of volatile Zr-intermediates}, volume={37}, DOI={10.1557/s43578-022-00566-6}, number={9}, journal={Journal of Materials Research}, publisher={Springer Science and Business Media LLC}, author={Grimm, Sebastian and Baik, Seung-Jin and Hemberger, Patrick and Kasper, Tina and Kempf, Andreas M. and Atakan, Burak}, year={2022}, pages={1558–1575} }"},"publisher":"Springer Science and Business Media LLC","_id":"53084","page":"1558-1575","volume":37,"user_id":"94562","status":"public"},{"citation":{"mla":"Grimm, Sebastian, et al. “Mechanism and Kinetics of the Thermal Decomposition of Fe(C5H5)2 in Inert and Reductive Atmosphere: A Synchrotron‐Assisted Investigation in A Microreactor.” Advanced Materials Interfaces, vol. 9, no. 22, Wiley, 2022, doi:10.1002/admi.202200192.","bibtex":"@article{Grimm_Hemberger_Kasper_Atakan_2022, title={Mechanism and Kinetics of the Thermal Decomposition of Fe(C5H5)2 in Inert and Reductive Atmosphere: A Synchrotron‐Assisted Investigation in A Microreactor}, volume={9}, DOI={10.1002/admi.202200192}, number={22}, journal={Advanced Materials Interfaces}, publisher={Wiley}, author={Grimm, Sebastian and Hemberger, Patrick and Kasper, Tina and Atakan, Burak}, year={2022} }","ama":"Grimm S, Hemberger P, Kasper T, Atakan B. Mechanism and Kinetics of the Thermal Decomposition of Fe(C5H5)2 in Inert and Reductive Atmosphere: A Synchrotron‐Assisted Investigation in A Microreactor. Advanced Materials Interfaces. 2022;9(22). doi:10.1002/admi.202200192","ieee":"S. Grimm, P. Hemberger, T. Kasper, and B. Atakan, “Mechanism and Kinetics of the Thermal Decomposition of Fe(C5H5)2 in Inert and Reductive Atmosphere: A Synchrotron‐Assisted Investigation in A Microreactor,” Advanced Materials Interfaces, vol. 9, no. 22, 2022, doi: 10.1002/admi.202200192.","apa":"Grimm, S., Hemberger, P., Kasper, T., & Atakan, B. (2022). Mechanism and Kinetics of the Thermal Decomposition of Fe(C5H5)2 in Inert and Reductive Atmosphere: A Synchrotron‐Assisted Investigation in A Microreactor. Advanced Materials Interfaces, 9(22). https://doi.org/10.1002/admi.202200192","short":"S. Grimm, P. Hemberger, T. Kasper, B. Atakan, Advanced Materials Interfaces 9 (2022).","chicago":"Grimm, Sebastian, Patrick Hemberger, Tina Kasper, and Burak Atakan. “Mechanism and Kinetics of the Thermal Decomposition of Fe(C5H5)2 in Inert and Reductive Atmosphere: A Synchrotron‐Assisted Investigation in A Microreactor.” Advanced Materials Interfaces 9, no. 22 (2022). https://doi.org/10.1002/admi.202200192."},"status":"public","volume":9,"user_id":"94562","publisher":"Wiley","_id":"53083","abstract":[{"lang":"eng","text":"AbstractThe decomposition and reduction of ferrocene, an important precursor for iron chemical vapor deposition and catalyst for nanotube synthesis, is investigated in the gas‐phase. Reactive intermediates are detected to understand the underlying chemistry by using a microreactor coupled to a synchrotron light source. Utilizing soft photoionization coupled with photoelectron‐photoion coincidence detection enables us to characterize exclusive intermediates isomer‐selectively. A reaction mechanism for the ferrocene decomposition is proposed, which proceeds as a two‐step process. Initially, the molecule decomposes in a homogeneous surface reaction at temperatures <900 K, leading to products such as cyclopentadiene and cyclopentadienyl radicals that are immediately released to the gas‐phase. At higher temperatures, ferrocene rapidly decomposes in the gas‐phase, losing two cyclopentadienyl radicals in conjunction with iron. The addition of hydrogen to the reaction mixture reduces the decomposition temperature, and changes the branching ratio of the products. This change is mainly attributed to the H‐addition of cyclopentadienyl radicals on the surface, which leads to a release of cyclopentadiene into the gas‐phase. On the surface, ligand fragments may also undergo a series of catalytic H‐losses leading most probably to a high carbon content in the film. Finally, Arrhenius parameters for both global reactions are presented."}],"extern":"1","publication":"Advanced Materials Interfaces","issue":"22","department":[{"_id":"728"}],"keyword":["Mechanical Engineering","Mechanics of Materials"],"type":"journal_article","date_created":"2024-03-27T17:47:25Z","intvolume":" 9","date_updated":"2024-03-27T17:48:57Z","publication_status":"published","author":[{"last_name":"Grimm","first_name":"Sebastian","full_name":"Grimm, Sebastian"},{"last_name":"Hemberger","first_name":"Patrick","full_name":"Hemberger, Patrick"},{"full_name":"Kasper, Tina","last_name":"Kasper","orcid":"0000-0003-3993-5316 ","first_name":"Tina","id":"94562"},{"full_name":"Atakan, Burak","first_name":"Burak","last_name":"Atakan"}],"publication_identifier":{"issn":["2196-7350","2196-7350"]},"year":"2022","title":"Mechanism and Kinetics of the Thermal Decomposition of Fe(C5H5)2 in Inert and Reductive Atmosphere: A Synchrotron‐Assisted Investigation in A Microreactor","doi":"10.1002/admi.202200192","language":[{"iso":"eng"}]},{"status":"public","conference":{"name":"ESAFORM 2022","location":"Braga, Portugal"},"page":"1564-1572","publisher":"Trans Tech Publications, Ltd.","_id":"33002","user_id":"45779","volume":926,"citation":{"apa":"Böhnke, M., Unruh, E., Sell, S., Bobbert, M., Hein, D., & Meschut, G. (2022). Functionality Study of an Optical Measurement Concept for Local Force Signal Determination in High Strain Rate Tensile Tests. Key Engineering Materials, 926, 1564–1572. https://doi.org/10.4028/p-wpuzyw","mla":"Böhnke, Max, et al. “Functionality Study of an Optical Measurement Concept for Local Force Signal Determination in High Strain Rate Tensile Tests.” Key Engineering Materials, vol. 926, Trans Tech Publications, Ltd., 2022, pp. 1564–72, doi:10.4028/p-wpuzyw.","ieee":"M. Böhnke, E. Unruh, S. Sell, M. Bobbert, D. Hein, and G. Meschut, “Functionality Study of an Optical Measurement Concept for Local Force Signal Determination in High Strain Rate Tensile Tests,” Key Engineering Materials, vol. 926, pp. 1564–1572, 2022, doi: 10.4028/p-wpuzyw.","chicago":"Böhnke, Max, Eduard Unruh, Stanislaw Sell, Mathias Bobbert, David Hein, and Gerson Meschut. “Functionality Study of an Optical Measurement Concept for Local Force Signal Determination in High Strain Rate Tensile Tests.” Key Engineering Materials 926 (2022): 1564–72. https://doi.org/10.4028/p-wpuzyw.","short":"M. Böhnke, E. Unruh, S. Sell, M. Bobbert, D. Hein, G. Meschut, Key Engineering Materials 926 (2022) 1564–1572.","ama":"Böhnke M, Unruh E, Sell S, Bobbert M, Hein D, Meschut G. Functionality Study of an Optical Measurement Concept for Local Force Signal Determination in High Strain Rate Tensile Tests. Key Engineering Materials. 2022;926:1564-1572. doi:10.4028/p-wpuzyw","bibtex":"@article{Böhnke_Unruh_Sell_Bobbert_Hein_Meschut_2022, title={Functionality Study of an Optical Measurement Concept for Local Force Signal Determination in High Strain Rate Tensile Tests}, volume={926}, DOI={10.4028/p-wpuzyw}, journal={Key Engineering Materials}, publisher={Trans Tech Publications, Ltd.}, author={Böhnke, Max and Unruh, Eduard and Sell, Stanislaw and Bobbert, Mathias and Hein, David and Meschut, Gerson}, year={2022}, pages={1564–1572} }"},"quality_controlled":"1","project":[{"name":"TRR 285: TRR 285","_id":"130","grant_number":"418701707"},{"_id":"131","name":"TRR 285 - A: TRR 285 - Project Area A"},{"name":"TRR 285 – A01: TRR 285 - Subproject A01","_id":"135"}],"year":"2022","title":"Functionality Study of an Optical Measurement Concept for Local Force Signal Determination in High Strain Rate Tensile Tests","author":[{"id":"45779","last_name":"Böhnke","first_name":"Max","full_name":"Böhnke, Max"},{"last_name":"Unruh","first_name":"Eduard","full_name":"Unruh, Eduard","id":"72763"},{"first_name":"Stanislaw","last_name":"Sell","full_name":"Sell, Stanislaw"},{"full_name":"Bobbert, Mathias","first_name":"Mathias","last_name":"Bobbert","id":"7850"},{"last_name":"Hein","first_name":"David","full_name":"Hein, David","id":"7728"},{"id":"32056","orcid":"0000-0002-2763-1246","first_name":"Gerson","last_name":"Meschut","full_name":"Meschut, Gerson"}],"publication_identifier":{"issn":["1662-9795"]},"publication_status":"published","date_updated":"2023-01-17T09:02:59Z","intvolume":" 926","language":[{"iso":"eng"}],"doi":"10.4028/p-wpuzyw","publication":"Key Engineering Materials","abstract":[{"text":"Many mechanical material properties show a dependence on the strain rate, e.g. yield stress or elongation at fracture. The quantitative description of the material behavior under dynamic loading is of major importance for the evaluation of crash safety. This is carried out using numerical methods and requires characteristic values for the materials used. For the standardized determination of dynamic characteristic values in sheet metal materials, tensile tests performed according to the guideline from [1]. A particular challenge in dynamic tensile tests is the force measurement during the test. For this purpose, strain gauges are attached on each specimen, wired to the measuring equipment and calibrated. This is a common way to determine a force signal that is as low in vibration and as free of bending moments as possible. The preparation effort for the used strain gauges are enormous. For these reasons, an optical method to determine the force by strain measurement using DIC is presented. The experiments are carried out on a high speed tensile testing system. In combioantion with a 3D DIC high speed system for optical strain measurement. The elastic deformation of the specimen in the dynamometric section is measured using strain gauges and the optical method. The measured signals are then compared to validate the presented method. The investigations are conducted using the dual phase steel material HCT590X and the aluminum material EN AW-6014 T4. Strain rates of up to 240 s-1 are investigated.","lang":"eng"}],"date_created":"2022-08-18T09:33:54Z","type":"journal_article","keyword":["Mechanical Engineering","Mechanics of Materials","General Materials Science"],"department":[{"_id":"157"},{"_id":"630"}]},{"quality_controlled":"1","citation":{"short":"L. Schmelzle, M. Striewe, J. Mergheim, G. Meschut, G. Possart, D. Teutenberg, D. Hein, P. Steinmann, Journal of Adhesion Science and Technology (2022).","chicago":"Schmelzle, Lars, Marius Striewe, Julia Mergheim, Gerson Meschut, Gunnar Possart, Dominik Teutenberg, David Hein, and Paul Steinmann. “Testing, Modelling, and Parameter Identification for Adhesively Bonded Joints under the Influence of Temperature.” Journal of Adhesion Science and Technology, 2022. https://doi.org/10.1080/01694243.2022.2125714.","ieee":"L. Schmelzle et al., “Testing, modelling, and parameter identification for adhesively bonded joints under the influence of temperature,” Journal of Adhesion Science and Technology, 2022, doi: 10.1080/01694243.2022.2125714.","apa":"Schmelzle, L., Striewe, M., Mergheim, J., Meschut, G., Possart, G., Teutenberg, D., Hein, D., & Steinmann, P. (2022). Testing, modelling, and parameter identification for adhesively bonded joints under the influence of temperature. Journal of Adhesion Science and Technology. https://doi.org/10.1080/01694243.2022.2125714","bibtex":"@article{Schmelzle_Striewe_Mergheim_Meschut_Possart_Teutenberg_Hein_Steinmann_2022, title={Testing, modelling, and parameter identification for adhesively bonded joints under the influence of temperature}, DOI={10.1080/01694243.2022.2125714}, journal={Journal of Adhesion Science and Technology}, author={Schmelzle, Lars and Striewe, Marius and Mergheim, Julia and Meschut, Gerson and Possart, Gunnar and Teutenberg, Dominik and Hein, David and Steinmann, Paul}, year={2022} }","ama":"Schmelzle L, Striewe M, Mergheim J, et al. Testing, modelling, and parameter identification for adhesively bonded joints under the influence of temperature. Journal of Adhesion Science and Technology. Published online 2022. doi:10.1080/01694243.2022.2125714","mla":"Schmelzle, Lars, et al. “Testing, Modelling, and Parameter Identification for Adhesively Bonded Joints under the Influence of Temperature.” Journal of Adhesion Science and Technology, 2022, doi:10.1080/01694243.2022.2125714."},"publication":"Journal of Adhesion Science and Technology","department":[{"_id":"157"}],"keyword":["Materials Chemistry","Surfaces","Coatings and Films","Surfaces and Interfaces","Mechanics of Materials","General Chemistry"],"type":"journal_article","date_created":"2022-12-16T11:35:13Z","publication_status":"published","date_updated":"2023-01-17T14:46:01Z","author":[{"first_name":"Lars","last_name":"Schmelzle","full_name":"Schmelzle, Lars"},{"id":"30228","first_name":"Marius","last_name":"Striewe","full_name":"Striewe, Marius"},{"full_name":"Mergheim, Julia","last_name":"Mergheim","first_name":"Julia"},{"id":"32056","full_name":"Meschut, Gerson","first_name":"Gerson","last_name":"Meschut","orcid":"0000-0002-2763-1246"},{"first_name":"Gunnar","last_name":"Possart","full_name":"Possart, Gunnar"},{"id":"537","last_name":"Teutenberg","first_name":"Dominik","full_name":"Teutenberg, Dominik"},{"id":"7728","full_name":"Hein, David","last_name":"Hein","first_name":"David"},{"last_name":"Steinmann","first_name":"Paul","full_name":"Steinmann, Paul"}],"publication_identifier":{"issn":["0169-4243","1568-5616"]},"title":"Testing, modelling, and parameter identification for adhesively bonded joints under the influence of temperature","status":"public","year":"2022","user_id":"30228","doi":"10.1080/01694243.2022.2125714","_id":"34459","language":[{"iso":"eng"}]}]